Yes, I got the beta version
I still don't know my score, but passed , as I can see at galton.com
Henrique Issamu Terada
CPM Comunicações - Brazil
CCNA Certified
- Original Message -
From: Kevin Wigle <[EMAIL PROTECTED]>
To: Armando Santana <[EMAIL PROTECTED]>; <[EM
Change your config-register to 0x2142 in rommon mode , then router will boot
without configuration.
Type enable, and then , type config memory in order to reload the
configuration in NVRAM into RAM.
Henrique Issamu Terada
CPM Comunicações - Brazil
CCNA Certified
- Original Message
no service config
Henrique Issamu Terada
CPM Comunicações - Brazil
CCNA Certified
- Original Message -
From: Roger Wright <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, September 15, 2000 4:06 PM
Subject: How to get rid of "Loading network-config ... [
Hi group
I'd like to thank everyone in this group. Your valuable input has helped me
a lot.
Special thanks to Priscilla Oppenheimer . Her flash cards at
www.priscilla.com is awsome.
Now, CCIE written in December
thanks
Henrique Issamu Terada
CPM Comunicações - Brazil
CCNP Certified
*
If your tftp server is not at same network of your
router , you can use ip default-gateway, in order to reach the TFTP server. So,
you'll be able to do the download.
HTH
Henrique Issamu TeradaCPM Comunicações - BrazilCCNP Certified
- Original Message -
From:
Fernando
Li
the vlan which was configured at port before you set that as trunk port.
Henrique Issamu Terada
CPM Comunicações - Brazil
CCNP Certified
- Original Message -
From: wzup <[EMAIL PROTECTED]>
To: David Toalson <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Cc: David Toalson
Tony
What do you think about convert the boxes to Native IOS ?
I personally like this mode , since the switch runs L2/L3 on same software .
Did HSRP with them , working fine until now . Besides , I think it is
easier to customer to maintain by himself, since he doesn't need to care
about 4 MSFC
Did you config the vtp domain , as well vlan two , under vlan database ?
Terada
At 17:58 22/08/2001 -0400, Wilson, Christian wrote:
>I have a 2924xl-en switch that has been erased and reloaded, all the VTP and
>VLAN settings are at default. When I assign an IP address to VLAN 2, the
>command i
remove the command service config from your configuration
Henrique Issamu Terada
CPM Comunicações - Brazil
CCNA Certified
- Original Message -
From: Mohamed Abubakkar Siddiqu <[EMAIL PROTECTED]>
To: whatshakin <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday,
this is
not a trivial task , we spent some hours to find when was the problem , and
complete the upgrade on 2 MSFC's.
Henrique Issamu Terada
CPM Comunicações - Brazil
CCNA Certified
- Original Message -
From: Donohue, Steve <[EMAIL PROTECTED]>
To: cisco@groupstudy. com (E-ma
Answering just one question.
1) Who handles retransmition is Layer 4 , through TCP flow control.
I'm not sure if there is also a retransmition in HDLC, but I'm sure that
there's no one in Frame Relay , and there is in X25.
Henrique
- Mensagem original -
De: Schmendrick D
Hi everybody
Paul
Aux 0 speed is up to 38.4Kbps, but it DOES support PPP.
It does not support PPP framing in microcode.
You can see more details in CMTD course, page 4-13.
Henrique
- Mensagem original -
De: paul doyl [SMTP:[EMAIL PROTECTED]]
Enviada em: Sunday,
clear ip nat translations
after that, you're able to change the configuration
Henrique Issamu Terada
CPM Comunicacoes Ltda.
Technical Support - CCNA Certified
- Mensagem original -
De: Niraj Palikhey [SMTP:[EMAIL PROTECTED]]
Enviada em: segunda-feira,
configure service timestamps debug datetime msec
from global config.
you'll see at whitch time time they occured
even without it, debugs willl appear in order.
Henrique Issamu Terada
CPM Comunicacoes Ltda.
Technical Support - CCNA Certified
- Mensagem original ---
he Cisco 5200 are not
available with the Cisco 3640 bundles?
>A. The Cisco 3640 bundles support the majority of Cisco 5200 features, with
the following exceptions:
>-Modem pooling---The ability to logically group a set of modems and relate
them to a specific phone number; also, the Cisco 3600 modem
Hi list
Does anybody know about the results of FRS 2.0 Beta ?
Is it already available ?
Henrique Issamu Terada
CPM Comunicações - Brazil
CCNA Certified
- Original Message -
From: Kevin Wigle <[EMAIL PROTECTED]>
To: Cisco <[EMAIL PROTECTED]>
Sent: Monday, August 14, 2
me too ...
Henrique Issamu Terada
CPM Comunicações - Brazil
CCNA Certified
- Original Message -
From: Cisco2match S Hard <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, August 21, 2000 10:31 AM
Subject: Foundation 2.0 beta
>
> Dear all,
> Does any body a
Hi list
Can I do the accounting of history commands in a
router just using a Syslog Server ?
Or do I need a radius or tacacs+ , like a
CiscoSecure?
I'd like to use local authentication , and for each
user, record the commands he had done in the router.
The syslog Server is a 3CDaemon, fro
Hi group
>From Cisco Website, there are sample questions for CCIE Qualification Exam.
One of these questions is described below.
I couldn't understand when the answer says :
"Bridges cannot provide any form of flow control".
Flow control is a function of Network Layer.
Is this not a function of
whant kind of supervisor are you using
?
if it is sup II , you can use normal rollover
cable.
But, if it is sup III , you must use straight-ahead
cable (comes along with Cat5500 , a yellow cable)
good luck
Henrique Issamu TeradaCPM Comunicações - BrazilCCNA Certified
- Original M
Hi group
Does anybody know if the book Cisco Lan Swtiching cover Token Ring switches
, like Catalyst 3900 ?
thanks
Henrique Issamu Terada
CPM Comunicações - Brazil
CCNA Certified
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ
Does anyone know about the date of Foundation 2.0
Beta ?
It was 17/05/2000, but its status changed to TBD ,
at Cisco site.
Have you received some news ?
Henrique
Hi Robert
Actually , wildcard bits means which bits router should verify , or ignore,
when analyse an incoming or ourgoing packet.
So , if you use
access-list 1 permit 172.16.0.0 0.0.255.255
, it means that all packets with source address 172.16.0.0 should be
permitted.
If you use access-list 1 p
No
This is related with a software problem.
See the command show stack, and you'll see some stack traces about it.
Open a case at Cisco TAC, for help.
Otherwise, which IOS are you running ?
Henrique
- Original Message -
From: c.k.mohan <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent:
show module is for Catalyst 5k , 6k , 4k , etc .
- Original Message -
From: mohammed <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, May 16, 2000 6:19 PM
Subject: Re: Serial numbers for routers
> try show ver or sho module if supported.
>
>
> good luck
Does anyone know how to change the CATALYST 6500
mode from Hybrid to COSMOS ?
I did the correct reqiurements, but does not
function.
When , at ronmon mode I start boot from slot0
c6sup-is-mz.121-1.E , it send a message BAD MAGIC NUMBER
Any helps will be helpful
Henrique
Hi everybody
I've got an AS5300 , with a fast Ethernet , and a
Ethernet interface.
When customers dial into network , they must get an
IP address different , based on its domain in the username. They will dial to
same number.
For example , if the username is [EMAIL PROTECTED], they
wil fo
In my opinion , erase some files depends of which router you are handling.
Is a 7500 , you can use the command squezze to set which files you want to
erase , then delete this marked files.
But for 3600 , I don't know how to do it. A workaround is partitioning flash
, and put one image into each pa
I agree.
Not for OSPF only, but for all routing protocols .
Henrique
- Original Message -
From: Priscilla Oppenheimer <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, May 25, 2000 1:34 PM
Subject: Re: Good OSPF study material
> Jeff Doyle's "Routing TCP/IP" has a couple exce
I don't know about CCNP, but when I did CCNA, last month , there was no
Previous button.
Henrique
- Original Message -
From: K.FUJIWARA <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, May 29, 2000 8:27 AM
Subject: NO PRVIOUS BUTTON?
> >
>
> I failed CCNP ACRC today at 698/790.
Yes
You just should use encapsulation frame-relay ietf
regards
Henrique Issamu Terada
CPM Comunications - Brazil
CCNA Certified
- Original Message -
From: Stull, Cory <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, June 01, 2000 3:03 PM
Subject: cisco framerela
Yes, I had already seen that.
His name is Brandon Ta , and is the only one in the world who has 3 CCIE's.
Does anyone know who is the youngest , and his age ?
thanks
Henrique Issamu Terada
CPM Comunicações - Brazil
CCNA Certified
- Original Message -
From: <[EMAIL PROTEC
I don't know the level, but we're Silver Partner , and there's the same
"Gentleman agreement" , in order to avoid Cisco get people from its
partners.
I think this is the same for Gold partners, not sure about Premier ...
Henrique Issamu Terada
CPM Comunicaçõe
rique Issamu Terada
CPM Comunicações - Brazil
CCNA Certified
- Original Message -
From: Dale Holmes <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, June 04, 2000 11:19 PM
Subject: FRS 2.0 Beta a Hoax???
>
> I don't think that Cisco is really conducting a beta f
Catalyst's 4003 also don't support ISL , just dot1q.
You can see that by show port capabilities
Henrique Issamu Terada
CPM Comunicações - Brazil
CCNA Certified
- Original Message -
From: Darren Ward <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, May 29
Ctrl Shift 6 x
Henrique Issamu Terada
CPM Comunicações - Brazil
CCNA Certified
- Original Message -
From: Lawrence Dwyer <[EMAIL PROTECTED]>
To: Groupstudy <[EMAIL PROTECTED]>
Sent: Thursday, June 08, 2000 10:27 PM
Subject: Stopping Ping
> Is there any way to stop a
yeah ! I did it.
With SQL Server database too.
Henrique Issamu Terada
CPM Comunicações - Brazil
CCNA Certified
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, June 07,
Hi people
I apologize if my question is a little bit stupid ,
but I cannot understand the ospf process id.
Should it not be the AS ? Why ?
Henrique Issamu TeradaCPM Comunicações -
BrazilCCNA Certified
Hi everybody
Well, just arrived at home . I did Foundation 2.0
Beta today .
It had 232 questions , 180 minutes.
A lot of questions of BGP , OSPF (Routing part ) .
A little of multicast . NO Appletalk , no IPX .
For BCRAN , a lot of Cisco 700 questions ,
and dial on demand routing , and PPP
WAN Certifications is one of 5 types of Cisco Certifications : they are
Route/Switch , WAN , ISP Dial , SNA , Design.
WAN Certifications includes CCNA , CCNP and CCIE.
Their focus is Cisco WAN Switches , like IGX , BPX ,MGX , and Strataview ,
now called as Cisco WAN Manager.
Henrique Issamu
I don't think so.
In my oppinion , it has the same behavior of a
Cisco 3640 with IOS from 3620.
There are specific IOS for each one.
Henrique Issamu TeradaCPM Comunicações - BrazilCCNA Certified
- Original Message -
From:
Glenn
Flood
To: '[EMAIL PROTECTED]'
Sent: Fr
ok
thanks everybody ...
Henrique Issamu Terada
CPM Comunicações - Brazil
CCNA Certified
- Original Message -
From: Ricardo Ferreira <[EMAIL PROTECTED]>
To: Henrique Issamu Terada <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Monday, June 19, 2000 8:08 PM
Subject: R
For Cat 5500 console (Only for Sup III) , you should use a straight-ahead
cable. Not rollover cable.
For 6500 , I think it's rollover .
Henrique Issamu Terada
CPM Comunicações - Brazil
CCNA Certified
- Original Message -
From: Cisco Wave <[EMAIL PROTECTED]>
To: Cisco Group St
Your IOS should be at least IP Plus.
IP only does not support NAT.
Henrique Issamu Terada
CPM Comunicações - Brazil
CCNA Certified
- Original Message -
From: Kenny Sallee <[EMAIL PROTECTED]>
To: Howard C. Berkowitz <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Saturda
Can I use Teraterm for remote access ?
For exemple , using my internal modem of
laptop , dial to a modem which is attached to a aux port from
router.
I can do that with Hyper Terminal , but I did not
find this option on TeraTerm.
thanks
Henrique Issamu TeradaCPM Comunicações -
BrazilCCNA
I don't think there is the squezze command in 3640.
7000 have it.
I would recommend partition flash in two , so you can erase the specified
partition that bad IOS belongs to.
Henrique Issamu Terada
CPM Comunicações - Brazil
CCNA Certified
- Original Message -
From: Jim Bond &l
Unless you're doing NAT/PAT in your dist. switches, how would you route the
packet back to the right workstation ?
> _
> Henrique Issamu Terada, CCIE # 7460
> IT Support - Open Network
> CPM S.A. - Tecnologia criando valor
> Tel.: 55 11
t work properly .
Regarding the other question , as far as I know, set trunk desirable works
only between two switches in same VTP domain.
set trunk on should always works , not sure about negotiate and nonegotiate
.
> _____
> Henrique Issamu Terada, CCIE # 746
Maybe policy-based route , matching the address of your server and setting
outgoing interface/next hop ?
> _
> Henrique Issamu Terada, CCIE # 7460
> IT Support - Open Network
> CPM S.A. - Tecnologia criando valor
> Tel.: 55 11 4196-0710
&g
; route problem ?
> _____
> Henrique Issamu Terada, CCIE # 7460
> IT Support - Open Network
> CPM S.A. - Tecnologia criando valor
> Tel.: 55 11 4196-0710
> Fax: 55 11 4196-0900
>
results, and post it , if your problem is still unresolved.
> _
> Henrique Issamu Terada, CCIE # 7460
> IT Support - Open Network
> CPM S.A. - Tecnologia criando valor
> Tel.: 55 11 4196-0710
> Fax: 55 11 4196-0900
> [EMAIL PROTEC
If you change OSPF priority, it will only take effect in the next ellection
.
If the ellection is already done , clear process is needed , or, at least ,
remove current DR and BDR from network .
[]'s
> _
> Henrique Issamu Terada, CCIE # 7460
&
I also use Checkpoint Securemote behind my home router doing NAT. No problem
.
Are you using ISAKMP or FWZ ?
FWZ doesn't work behind nat .
[ ]'s
> _
> Henrique Issamu Terada, CCIE # 7460
> IT Support - Open Network
> CPM S.A. - Te
Did you enable spannint-tree portfast ?
I'd use set port host instead , which includes STP portfast, aomong other
things . . .
> _
> Henrique Issamu Terada, CCIE # 7460
> IT Support - Open Network
> CPM S.A. - Tecnologia criando valor
&
Waht is the native vlan in the cat 5500 ?
> _
> Henrique Issamu Terada, CCIE # 7460
> IT Support - Open Network
> CPM S.A. - Tecnologia criando valor
> Tel.: 55 11 4196-0710
> Fax: 55 11 4196-0900
> [EMAIL PROTEC
The key point in this case is to have OSPF advertising the real subnet,
instead of /32 address.
In order to achieve it , add ip ospf network ponit-to-pont under interface
config.
> _
> Henrique Issamu Terada, CCIE # 7460
> IT Support - Open Network
Remember it is just a lab .
You may be asked to do things you wouldn't in the field .
It is the same case as : do something , but don't use command XX . . .
> _
> Henrique Issamu Terada, CCIE # 7460
> IT Support - Open Network
>
B10.60.60.X
> _
> Henrique Issamu Terada, CCIE # 7460
> IT Support - Open Network
> CPM S.A. - Tecnologia criando valor
> Tel.: 55 11 4196-0710
> Fax: 55 11 4196-0900
> [EMAIL PROTEC
Maybe L2TP v3 ?
> _
> Henrique Issamu Terada, CCIE # 7460
> IT Support - Open Network
> CPM S.A. - Tecnologia criando valor
> Tel.: 55 11 4196-0710
> Fax: 55 11 4196-0900
> [EMAIL PROTEC
As far as I know, it is due to IDB allocation . . .
Cheers ,
Henrique Terada
At 22:44 03/09/2001 -0400, Ednilson Rosa wrote:
>You need to do a reload after removing it.
>
>ER
>- Original Message -
>From: "Md Nazri"
>To:
>Sent: Monday, September 03, 2001 10:54 PM
>Subject: delete subin
Well, I got something like this while playing with tacacs+ AAA .
Cat 6509 MSFC and Tacacs+ server weren't talk to each other . Configuration
looked good , the key was correct , but wasn't working . Besides , the 7200
router had the same tacacs+ config and was working .
On MSFC I had to remove
I guess you can use interface range .
At least , I did it on Cat6509 running Native IOS . . .
HTH
Henrique I. Terada , CCIE # 7460
CPM Comunicacoes S/A
Professional Services
Customer Service Consultant
Phone: +55-11-4196-0710
Fax: +55-11-4196-0900
Call Dispatch : 0800-117239
E-mail: [EMAIL PRO
0,02
> _
> Henrique Issamu Terada, CCIE # 7460
> IT Support - Open Network
> CPM S.A. - Tecnologia criando valor
> Tel.: 55 11 4196-0710
> Fax: 55 11 4196-0900
> [EMAIL P
Besides, load balance in CEF considers origin/destination , whereas Fast
Switching only makes load balance by destination .
Of course, there is per-packet in both , also.
> _
> Henrique Issamu Terada, CCIE # 7460
> IT Support - Open Network
maybe something in the switch . . .
are both routers active , noone in standby ?
> _
> Henrique Issamu Terada, CCIE # 7460
> IT Support - Open Network
> CPM S.A. - Tecnologia criando valor
> Tel.: 55 11 4196-0710
> Fax: 55 11 4196-0900
It is possible .
you only need to manually configure the admin group .
> _
> Henrique Issamu Terada, CCIE # 7460
> IT Support - Open Network
> CPM S.A. - Tecnologia criando valor
> Tel.: 55 11 4196-0710
> Fax: 55 11 4196-0900
66 matches
Mail list logo
