If the KPOD is causing this due to static discharge, reverse ends on the
direction of the cable connecting it to the K3S or K3. The wire to pin one of
our supplied cable is supposed to be cut, but it is possible there is one end
with a wire still making the connection. (If you are supplying your
I have Pelecan iM2700 case that I picked up and re-purposed as a travel case
for a K3 + P3 with closed cell foam. I went portable and this case is excess to
my needs. Could be used as-is or re-worked into anything. Interior dimensions
22" x 17" x 8". It is tan in color. I expect the best way to
We have seen some great macro ideas where a single function key is used to
toggle between two different K3 states, e.g. in and out of split, toggling
between two AGC THR settings, etc. Unfortunately, this idea cannot be used
(directly) with a KPod button. Each of the the 16 KPod buttons are de
Sounds like a rain forest to me.
On 11/11/2016 7:16 AM, Charlie T, K3ICH wrote:
I try to get it nearer to 50% which seems to help both those conditions.
73, Charlie k3ICH
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Most certainly! K*Pod has a three-position rocker switch that assigns the
knob to VFO A, VFO B, or RIT/XIT. If the second rx is enabled and the K*Pod
rocker is in the VFO B position, the pod knob tunes the second rx, even if
you're not presently listening to it. That's exactly how I operated SS las
These two sentences contain all of the phonemes (sounds) of the English
language and I have found them useful in adjusting things:
"Joe took father's shoe bench out."
"She was waiting at my lawn."
Al W6LX
>> The process is to speak random words for several seconds while monitoring
>> wi
Hi,
Now we are cooking. I am glad you found the real problem. There is virtually
0 probability that reloading the same firmware will fix anything. There is
no such thing as a "busted firmware load" except the kind that leaves the
"CPU load" or similar message indicating that the bootloader firmwar
Hmmm ... not uncommon for our relative humidity to be in single digits,
and it's very often less than 20%. I never get shocked by static
discharge. However, when we lived in Auburn CA with numbers in the 30
to 50% range, it happened all the time. There must be more to it than
water vapor.
Elecraft KXPD3 Iambic Paddle, like new with spring kits and tool as
shipped. About a year old, but very low use. $100 shipped
Pls contact off list if interested
Lou W0TQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/li
Hello,
There is a new release of Win4K3Suite that allows integration of the SDRPlay
RSP (Radio Spectrum Processor) with Win4K3 and the Elecraft KX2 and KX3. This
new solution provides a easy to use 1.8MHz bandwidth Panadapter with no need
for a sound card. Please note that you WILL need a trans
We should get some openings on 10 m in a bit also... Activity on PropNET and
WSPRnet already showing US transcon links. Might listen down into CW segment in
a few...
Jack - KD4IZ
Sent from my iPad
> On Nov 11, 2016, at 11:26, Wayne Burdick wrote:
>
> Working all kinds of DX on both bands.
>
Thanks Wayne! Hope it continues through the weekend.
On Nov 11, 2016 11:32 AM, "Wayne Burdick" wrote:
> Working all kinds of DX on both bands.
>
> Have fun!
>
> Wayne
> N6KR
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/
A K3/P3 can be used to measure the KX3 SSB TX bandpass. The process is
to speak random words for several seconds while monitoring with a P3 in
"Peak" mode. After about 30 seconds the display will stabilize.
The K3 filter width is 2.1 KHz 350 - 2450
Here are some measurements:
http://kn5l.net/KX3-
Working all kinds of DX on both bands.
Have fun!
Wayne
N6KR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted b
Hi all,
Here's Steve's latest mountain-top expedition video:
https://youtu.be/HkeZhnJo1g4
73,
Wayne
N6KR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Po
I called the Elecraft to get some help with this. After removing the K3
out of line, removed computer control, amps, tuner etc. The problem was
gone.
I was running radio control with my logging software. I found a tab
where that software was sending the odd FC offsets.
Just like computers,
This is a huge problem in Minnesota due to the extreme cold causing
humidity on the windows and turning to ice.
It is difficult to hit a happy medium between avoiding static and wet
windows.
As for protecting my equipment, I have mentioned keeping a grounded
wrist strap around an Altoids can
b
As you may know, the 664 and 666 were EV's first "variable-D" mics --
the 666 was the pro version, the 664 for "PA." The 666 was known as the
Buchannon Hammer because Lou Burroughs, co-founder of EV with Al Kahn,
demonstrated their ruggedness by using one to drive a nail. (EV was in
Buchannon,
Can the K-POD be used to tune the 2nd receiver in SO2V mode, say in a
contest?
I own an older K3 with the 2nd receiver, but have only used it a couple
times and it remains packed away awaiting the next outing, thus the perhaps
silly question.
Thanks in advance for the answer.
Mike VE9AA
Hello,
Last night I was trying to use my KX3 with 2M module to decode weather
satellite images. I have been working at this for a while now with very
limited success. I am using Gnome predict to find the satellites and
control the radio using rigctld. I am using xwxtoimg to decode the
sounds co
Yes, but they typically DO use a three wire (case at ground) power cord.
I make it a point to touch the metal side of the computer before anything
else.
A couple other recommendations would be to buy a cheap digital humidity
indicator and put one or more humidifiers* around the house.
I'm not sur
To prevent static discharge problems with my computers, I have a bare
ground wire attached to the side of my desk. I touch it when I first sit
down. In the winter, it does draw a spark. Most computers are not well
designed or protected.
That said, I had no idea the K3 was susceptible to ESD -
22 matches
Mail list logo