Call the power company and have them shut down their generators!
Criticism is something we can avoid easily by saying nothing, doing nothing,
and being nothing-Aristotle
--- On Wed, 9/8/10, Mike WA8BXN wrote:
> Cc: FlexRadio@flex-radio.biz
> Date: Wednesday, September 8, 2010, 3:54 PM
> I de
An update on my noise hills: I put a dummy load at the antenna end of the
coax, and they aren't there any more. There are some other quirks that can
be seen but of a much different nature that are probably switching supply
generated and some internal 1500 artifacts.
Thanks again to all who co
Hello Mike,
For over a year, I had a problem with 'noise hills' mostly on 40m. The
peaks were spread approx 60 KHz apart and their amplitude was about 10
to 15 dB above the normal noise floor. They would go away completely
every few days for a couple of hours, but they always came back again.
Perhaps its electrical ballast noise from your neighbor's fluorescent
lights?
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Mike WA8BXN
Sent: Wednesday, September 08, 2010 10:40 AM
To: flexradio@flex-radio.biz
Subject: [Fl
If you really want to "see" this type of noise switch to the panafall
display. When the power supply was going out on my last general use
computer I was treated to this display.
Steven
--
Sent from my Linux box.
Regards de KC6KGE
Skype flamebait
Gmail flamebait at gmail dot com
_
On Wed, Sep 8, 2010 at 1:27 PM, Mike WA8BXN wrote:
> How about some more possibilities as to source since others are seeing
> these
> things: Could it be some sort of spread spectrum signal that should go
> un-noticed in our bands. The one second or so variation rate made me think
> of electric f
Jim:
Yes, Power out is only reported now on a percentage value.
The unit is calibrated at 5.0 Watts = 100 percent.
On 60 Meters, the FCC only allows SSB transmission.
Please check and see if it puts out power on SSB. It should.
--- Graham
==
On Wed, Sep 8, 2010 at 1:21 PM, n8luv...@juno.com
How about some more possibilities as to source since others are seeing these
things: Could it be some sort of spread spectrum signal that should go
un-noticed in our bands. The one second or so variation rate made me think
of electric fence noise. I doubt its that because I don't think there are
an
Thanks, Brian, this is all excellent advice and it's actually what I
did. Yes, my antennas (4) are verticals with about 32 ground radials
each, and yes, there is a grounded cable entry plate with lightning
arresters in the feed-through connectors. I recommend the procedure to
others.
George
On 9/
I don't think we are being too helpful here. Wish I had a spare one to sell
you but I doubt I will ever have enough to want to sell one!
73
Neal Campbell
Abroham Neal Software
www.abrohamnealsoftware.com
(540) 645 5394 NEW PHONE NUMBER
Amateur Radio: K3NC
Blog: http://www.abrohamnealsoftware.com/
On Wed, Sep 8, 2010 at 12:50 PM, Bill wrote:
> Will they build one WITH TOBACCO SMOKE??
They can't. Tobacco smoke is, a) a nonconductor, and b) not structural.
--
Brian Lloyd, WB6RQN/J79BPL
3191 Western Dr.
Cameron Park, CA 95682
br...@lloyd.com
+1.767.617.1365 (Dominica)
+1.931.492.6776 (US
On Wed, Sep 8, 2010 at 12:54 PM, Mike WA8BXN wrote:
> I decided to cut off all power to the house, ran the 1500 on battery, and
> used a laptop on its own battery. Still was able to quickly find some of
> the
> hills on the panadaptor.
>
> I am thinking of putting a dummy load where my vertical i
On Wed, Sep 8, 2010 at 11:11 AM, George Works wrote:
> I also see drifting noise hills, but mine got a lot smaller when I put
> several ferrites on the feedline near the antenna and near the radio,
> and also put them on other cables to the radio. I suspect that ground
> loops, especially big gr
I decided to cut off all power to the house, ran the 1500 on battery, and
used a laptop on its own battery. Still was able to quickly find some of the
hills on the panadaptor.
I am thinking of putting a dummy load where my vertical is at the end of the
feedline and see if I have any hills that
Will they build one WITH TOBACCO SMOKE??
On 09/08/2010 14:16 PM, greathoun...@aol.com wrote:
I'm sure they will agree, they'll build you one any way you want... ;-)
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.bi
Yes Neal, I know that one. And that's the only thing I dislike about my
radio. Seems like if they had to go to red for the switch, the one in the
bottom would be red too. But I'd rather have the blue. It's not the easiest
radio to get running. With the 2 monitors and 2 tuners, that makes 8 th
Except with a blue LED power switch!
Neal Campbell
Abroham Neal Software
www.abrohamnealsoftware.com
(540) 645 5394 NEW PHONE NUMBER
Amateur Radio: K3NC
Blog: http://www.abrohamnealsoftware.com/blog/
DXBase bug reports: email to ca...@dxbase.fogbugz.com
Abroham Neal forums: http:/www.abrohamneals
I'm sure they will agree, they'll build you one any way you want... ;-)
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40fle
Want to purchase a Flex 5000A that has not been around tobacco smoke.
Don't need the 2nd receiver.
73,
Joe N9VX
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
See my comments below
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of n8luv...@juno.com
Sent: Wednesday, September 08, 2010 2:21 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] PowerSDR 2.08 problems found ---
Hello all:
I've owned my Flex-1500 now for 3 weeks. The CD install was PwrSDR version
2.05. All has gone well even though my OS is Vista! - I decided to install
version 2.08. The very 1st items of concern I have discovered are:
1. the xmit power out mtr on 2.05 showed watts out. The new 2.08 sh
I also see drifting noise hills, but mine got a lot smaller when I put
several ferrites on the feedline near the antenna and near the radio,
and also put them on other cables to the radio. I suspect that ground
loops, especially big ground loops between my shack and antennas, pick
up this sort of
I also have the 'hills' here.
First thing you need to do is power the radio and computer from a battery
and kill all power to the house.
In an instant you will know if you are the noise source or whether it is
from off site. I found three sources in the shack and killed them. My
noise level drop
I get those too ... good news is that they usually only occur on frequencies
where weak rare DX are hiding!
I thought it was discussed previously that this likely a by-product of the
switching power supplies in other electronic devices, possibly even those in
Flat Panel Monitors, TV's, etc
-
On Wed, Sep 8, 2010 at 10:27 AM, Jim Barber wrote:
> Variable-frequency motor drives can look like that too. Any industrial
> laundries, food processors etc. in the neighborhood?
>
> Of course the neighbor's front-loading washing machine could just as easily
> have a noisy VFD, (my Sears Kenmore
To all:
I am several miles from anything close to industrial. Neighborhood noise
generators like appliances would not be on for hours.
I tuned around with my 1500 now to see what I could find. At the upper end
of 20 M I am finding a similar pattern, but this time its much broader (on
the ord
Variable-frequency motor drives can look like that too. Any industrial
laundries, food processors etc. in the neighborhood?
Of course the neighbor's front-loading washing machine could just as
easily have a noisy VFD, (my Sears Kenmore Elite does, unfortunately)
but the regular hours of operat
To a point it's cool, but I live about 7 miles from the NOAA Ionosonde
xmitter in Boulder Colorado. :-)
Fortunately, they only transmit at certain times and for brief periods.
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
Ionosonde Wasn't that a acid rock band that's plane crashed into
the mountain in Nebraska ??? LOL
On 09/08/2010 11:22 AM, Drax Felton wrote:
Ionosonde. Wow. That's cool. I see it all the time.
From: br...@lloyd.com [mailto:br...@lloyd.com] On Behalf Of Brian Lloyd
Sent: Wednesday,
I also have, what I believe, you are seeing. Mine start daily (days week),
between 12:15 pm and 1:00 pm CDT. The "hills" rise and fall at cyclic rates
of 4 sec some days, 8 sec other days and occasionally 12 sec. The hills
disappear sometime after 4:00 pm CDT.
The "hills" are spaced betwee
Ionosonde. Wow. That's cool. I see it all the time.
From: br...@lloyd.com [mailto:br...@lloyd.com] On Behalf Of Brian Lloyd
Sent: Wednesday, September 08, 2010 11:59 AM
To: Drax Felton
Cc: Burt; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Drifting noise hills
The noise hump that
Gentlemen,
In order to have the folks at FlexRadio to only have to 'fix' this bug once, I
have put together a quick document outlining the scope and requirements. I
believe it covers what needs to be implemented in PowerSDR and the Flex-1500 to
allow reliable sequencing of external equipment,
The noise hump that wanders around is usually a switching power supply, and
not necessarily the one powering the radio. Switching "wall-wart" supplies
are especially bad.
The peak that scans from the left to right on the panadaptor is usually an
Iononsonde probing the ionosphere. In some areas of
I see little anomalies all the time on my Flex 5000A. I use an Astron
RS-35A linear supply.
My favorite is the peak that shoots from the left of the panadapter and
slides the whole way across increasing in frequency.
Then on six meters they stay in the same physical location, hopping back, on
s
Hank -
One of the things I have noticed with the 1500 --- when I see birdies on on
the panadapter on a given band, if I increase the preamp gain a step they go
down into the noise. I gave on the acer aspire one netbook and got a Toshiba
"crossover" (sized betweeen a netbook and notebook) with a
Mike
I've seen that too. The ones I've seen do drift, but very slowly and you
can hear them - a low frequency noise. But . they do not appear on
either the K3 or the K2 - all running on an Astron RS50.
I also hear (and see) birdies on the 1500 that are not there on the K2 or
K3
you would not believe the number of these signals a guy can hear in the
suburbs... especially on the low bands...my only relief has been to at least
limit their strength by azimuth heading with an Rx only 4 square, a la K7TJR /
HiZ antennas..
this AFTER 'cleaning house'
80m cw was alm
Mike:
That is the "signature" of a switching power supply.
Your WiFi router? Other "wall warts" ?
Your desktop computer.
Any laptop computer power supplies.
--- Graham
==
On Wed, Sep 8, 2010 at 9:40 AM, Mike WA8BXN wrote:
> I have noticed at times (particularly during fox hunts) what I can
I have noticed exactly the same thing on my FLEX-3000, especially on 6m and
20m.
Ron W5RKN
--
From: "Mike WA8BXN"
Sent: Wednesday, September 08, 2010 9:40 AM
To:
Subject: [Flexradio] Drifting noise hills
I have noticed at times (particularly d
I observed it until I changed power supplies
Burt
--- On Wed, 9/8/10, Mike WA8BXN wrote:
> From: Mike WA8BXN
> Subject: [Flexradio] Drifting noise hills
> To: flexradio@flex-radio.biz
> Date: Wednesday, September 8, 2010, 10:40 AM
> I have noticed at times (particularly
> during fox hunts) wha
I have noticed at times (particularly during fox hunts) what I can best
describe as a noise hill that usually drifts around in frequency. For a
width of several KHzon the panadapter I see what is shaped like a "normal
curve" that trails off for many more KHz. In panfall mode I can see a
brightening
I would suggest the option of inhibiting TX unless the FlexWire PTT pin is
based, along with the normal "Delay PTT" that is already in the software
(and not working). This allows for the flexibility required with expensive,
complicated sequenced systems. PTT-Out should still go to ground when
pushi
42 matches
Mail list logo