Reminds Me. I could ue a small Alignment tool fot adjusting The VCO Coil
L104 on a GE Phoenix. Make this a Golden Request. Its avery Small Square
tool.
Truly. We could very well cease talking about this Subject is getting Old
now.Thanks
Wesley AB8KD
I have two repeater cabinets to give away. They are 5 1/2 and 6' tall.
Deep cabinet double rail. Avalable now in Brooklyn, NY. I can be
reached at 718-999-1436 Thanks
Rich N2ROW
Hi Jim,
Would be interested in taking you up on that offer. have 2 GE Phoenix(16
Channel) one VHF, one UHF,which would like the Chips programmed. was
looking for your e-mail address on ARRL website, where I could reply
direct to you, instead of tying up the Repeater-Builder Website. My
e-mail addr
That is perfectly understandable Plus, as someone else mentioned, the
switcher will save you money.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Mathew Quaife
Sent: Sunday, January 14, 2007 10:22 AM
To: Repeater
Hey Sean. Checked out the website,& downloaded the Software. I like what
I see, & will go this route.
Thanks again for the comeback.
Theway this works is at the next Hamfest will run acroos an GE Suitcase
Programmer at the same Peice, but will go this route.
73's Wesley AB8KD
settled on an IOTA DLS-15 power supply with an IQ4 smart charge controller.
It is connected full time to the (new) batteries, and I only have to add
water every couple of months. I have not noted any kind of noise generated
by the charger. This setup works very well for me.
Richard, N7TGB
Heh... Same thing I found; Google is your friend.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Mike Pugh
Sent: Tuesday, January 09, 2007 6:57 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder
In my opinion, they are very good quality power supplies. I am using the
DLS-15 as a four stage charger for my home shack's batteries, and in the
year and a half I've owned it, I have had no problems at all.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoo
I admit I missed it, so I need new finals...
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Laryn Lohman
Sent: Sunday, December 17, 2006 9:13 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re
Sure doesn't... this is the type of attitude that keeps people from joining
our hobby.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Steve Bosshard (NU5D)
Sent: Sunday, December 17, 2006 6:45 PM
To: Repeater-Bu
Paper tape machines! Man, that's what I first learned my Morse Code with.
Wasn't that McCoy ? I remember his name popping up a lot back then. (
Dinosaurs still roamed the earth back then).
Well, I'm glad I learned it, its been nothing but a source of joy to me.
Since I first got my novice call si
Me too. I just ordered the general study guide.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Dave Schmidt
Sent: Friday, December 15, 2006 10:25 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater
My interpretation is that it will be effective 30 days after it is published
in the federal register, so the date hasn't been determined yet.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Dave Schmidt
Sent: F
<>
Thanks Neil for your Help.
Went to Fort Wayne Hamfest today & picked up an Relatively new Motorola
test set Model S1059A, with the cable plus Motrac extension for $60.00,
which is what I need. Hope to get the Micor extension cable in the
future.
Wesley AB8KD
Those aren't advertisements, they are providing information about the group.
Richard
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Jon Pearl - W4ABC
Sent: Thursday, June 08, 2006 6:16 AM
To: Repeater-Builder@yahoogroups.com
Su
Hi Paul
Glad to know this, as I was planning to build this Circuit. Tks for Info
Wesley AB8KD
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*>
that are
basically inaccessable for repairs for 6 months of the year, you
cannot have this kind of thing happen...
Anyone have experiences over the past few years? Particularly the 4
bay open dipole collinear variety of which we almost exclusivly use.
Richard
VA7AA
I'm looking for some "high stability" Mitrek channel elements to use in
several link and repeater transmitters we have. The part number is KXN-
1095.
I can use about 15 of these channel elements.
The standard elements we are currently using are not very stable and
allow the transmitter to drift
Sorry for the off topic.Where better than here to ask this question. We
are looking for amatuer repeaters to link into us. In upstate NY, NJ,
CT. Or we are willing to trade repeater sites to add a new repeater.
contact me via email or 718-999-1436
Thanks
73
Rich N2ROW
www.n2row.net
Yaho
What I meant to say Steve is,the 807 Tubes brings
back some good memories as in 1957 I built mt first Cw Transmitter using
these tubes
Wesley AB8KD
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from t
Same here. I think it is because they bought Bank One and switched the old
bankone.com web and internet banking to chase.com on the 26th of March. I
guess the Scammers hope to get people to give away their log-in
information...
Rich WA8DBW
- Original Message -
From: "skipp025" <[E
That thought crossed my mind also, but it still looks like something
somebody built in their garage.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Dan Blasberg
Sent: Saturday, April 01, 2006 8:06 AM
To: Repeater-Builder
Hi Matt
I have the same Icoms that you Do. Bought them at Dayton Hamfest for $25
dollars a piece. Bought an Repeater interface ITS-10
from EPCOM,along with the Programming Cable & software for less than a
$100 bill. it works great. Picked up a 4 can Motorola Cavity at
Geotgetown,Oh Hamfest for $1
EmCommWest and the Hamfest/fleamarket are held here in Reno; this year it
will be May 6 & 7th. There has been talk of it moving somewhere else after
this year, Las Vegas, perhaps.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Be
At the Hamfest that takes place during our EmCommWest ,
admission and space rent is free! It is small compared to the others, but
the price is right.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Paul Finch
Sent: Saturday
ion on
the Repeater-Builder site, but I haven't seen them posted there.
The URL to the page featuring the articles we speak of:
<http://www.n7tgb.net/pages/radio/radio_resource3.htm>
Richard, N7TGB
www.n7tgb.net
-Original Message-
From: Repeater-Builder@yahoogroups.com
[ma
Those look like the ones I have on my web site.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of skipp025
Sent: Sunday, March 19, 2006 10:19 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Decibel PDF files
Thanks Coy.
This looks like the Route that I wll probably Take. Did I happen to see
you on Echolink yesterday?(Disney World) connected to me while I was
talking to that Canadian Station?
Wesley AB8KD
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com
Thanks Steve for your Offer.Was hop[ng to find a Way to do it myself.
Wes AB8KD
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of
his is ab7xyz."
This was during a net I used to monitor; I quit listening to it
because it drove me nuts.
I
heard this a little while ago: "you're coming in so strong, you're bending the
needle on my S meter!"
Richard, N7TGB
-Original Message-From:
Rep
Abandoning Outlook and Outlook Express is not the answer: having a
topnotch antivirus program and keeping it up to date is. I've used Outlook
for years with no virus problems.
Richard
-Original Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECT
particular
virus making the rounds causing it?
Richard, N7TGB
-Original Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED]On Behalf Of
N9WYSSent: Saturday, February 18, 2006 8:48 AMTo:
Repeater-Builder@yahoogroups.comSubject: RE: [Repeater-Builder
, after several
months, the problem has tapered off.
Richard, N7TGB
-Original Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED]On Behalf Of
N9WYSSent: Saturday, February 18, 2006 8:11 AMTo:
'Kevin Custer'Cc:
Repeater-Builder@yahoogro
Or, as one local Ham advised another, "turn up your power, your audio level
is low." The other ham was nearly full quieting into the repeater.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Paul Finch
Sent: Friday, F
There is a version of Echolink (called EchoIRLP) that runs on Linux.
Installed on an IRLP box, EchoIRLP utilizes the same hardware and a few of
IRLP's scripts.
I have both running on my node.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[
If you have an IRLP node you can easily install Echolink on it, and then
they'll both use the same hardware.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Chris
Sent: Thursday, February 09, 2006 7:21 PM
To: Repeater-Bu
TECTED]>
To:
Sent: Sunday, February 05, 2006 2:42 AM
Subject: Re: [Repeater-Builder] mods.dk (possibly OT)
> Hi Richard,
>
> We are way off topic here!
>
> --- "Richard D. Reese" <[EMAIL PROTECTED]> wrote:
>
>> Mike;
>>
>> That's me. How do
the next one.
>
> Are you the same Richard Reese that was a police
> officer in Kenmore, Ohio back in the 70's? Car 7 or 17
> if I remember correctly.
>
> 73, Mike N8RQU
Yahoo! Groups Links
<*> To visit your group on the web, go
Me too.
Richard
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Dick
Sent: Tuesday, January 31, 2006 5:23 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] mods.dk (possiably OT)
Works for me, Rich.
73,
Dick
I do not know how many files are on mods.dk but - there are over 2700
members of this group. If each member were to download a file or two we
would have all of them. The files could then be posted together elsewhere
and remain available for free.
Just a thought.
73 Rich
http://www.wa8dbw.if
Working OK for me.
http://www.repeater-builder.com/rbtip/
Rich WA8DBW
http://www.wa8dbw.ifip.com
- Original Message -
From: "Dave VanHorn" <[EMAIL PROTECTED]>
To:
Sent: Monday, January 30, 2006 12:52 PM
Subject: [Repeater-Builder] Re: Web Site Down?
>
>> Is the RB web site down? Fo
I can't get to it either.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Jack Davis
Sent: Friday, January 27, 2006 8:33 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Web Site Down?
Is the RB web
Reminds me of those $600 hammers the Government buys!
Richard
-Original Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED]On Behalf Of
DickSent: Friday, January 13, 2006 8:43 AMTo:
Repeater-Builder@yahoogroups.comSubject: Re: [Repeater-Builder
I just wonder if the guy was dumb enough to think he wouldn't get caught!
Richard
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Dave VanHorn
Sent: Thursday, January 12, 2006 10:36 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Rep
I concur... This is one of the most interesting groups I've had the pleasure
of participating in. Indeed, a rare collection of talent in this group.
Fairly new to the world of repeaters,
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROT
ry it with compressed air. Never cleaned monitor boards
though, I was nervous about getting water in or under the
flyback.
Richard, N7TGB
-Original Message-From:
Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED]On
Behalf Of Fred TownsendSent: Tuesday, January 03,
Hi Roger
Am certainly Interested in that Sinclair Duplexer, if someone has not
beaten me to it
Wesley AB8KD
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAI
Heh...
With emphasis on Non_Profit!
Richard
-Original Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED]On Behalf Of Mark A.
HolmanSent: Sunday, December 25, 2005 12:29 PMTo:
Repeater-Builder@yahoogroups.comSubject: Re: [Repeater-Builder] Re
presence though.
73- Richard
Richard E. Wilson, KC7AM
Round-up Electronics Supply
--- In Repeater-Builder@yahoogroups.com, "Jeff DePolo WN3A"
<[EMAIL PROTECTED]> wrote:
>
>
> Trying to help a friend locate some data on Phelps-Dodge FX-14-50 (
Yahoo! Groups L
Ok, I'll bite... what does "TAS" stand for?
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of nj902
Sent: Sunday, November 27, 2005 7:02 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: try
http://ftp.fcc.gov/oet/info/maps/canline/linea.html
And
http://ftp.fcc.gov/oet/info/maps/canline/
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of cism211
Sent: Sunday, November 27, 2005 5:04 PM
To: Repeater-Builder
Check with any tower owners in your area. Many have old paging antennas
that were abandoned in place. I received mine free that way.
73 Rich WA8DBW
http://www.wa8dbw.ifip.com
- Original Message -
From: "JOHN MACKEY" <[EMAIL PROTECTED]>
To:
Sent: Sunday, November 20, 2005 12:27 AM
Sub
I stand corrected. It is the 4 watt UHF NLE6222A
Richard D. Reese
http://www.wa8dbw.ifip.com
- Original Message -
From: "Ken Arck" <[EMAIL PROTECTED]>
To:
Sent: Friday, August 26, 2005 4:14 PM
Subject: Re: [Repeater-Builder] HT-220 UHF
> At 03:39 PM 8/26/20
in the trash.
73 Rich
Richard D. Reesehttp://www.wa8dbw.ifip.com
YAHOO! GROUPS LINKS
Visit your group "Repeater-Builder" on the web.
To unsubscribe from this group, send an email to: [EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to
Oh, ummm... isn't that the same as a comma?
Richard
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Chuck Kelsey
Sent: Tuesday, August 23, 2005 6:59 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] For Sale
changed the box to one of the new modern
ones . No problem - no cost to me. The only thing was the guy was
new and I had to help him do it properly he did not know what carbons
were!
Rich WA8DBW
Richard D. Reesehttp://www.wa8dbw.ifip.com
- Original Message -
From:
Gran
Doug;
The call SM0OFV is as follows:
Jan Anderson
Jonstropsvagen 4 2tr
SE 171 55 SOLNA
Sweden
Lic Class Klass 1
Email [EMAIL PROTECTED]
Hope this helps
73 Rich
By the way sorry I did not have a chance to stop
when we were in Arizona last month.
Richard D. Reesehttp
ter and
at least as reliable as a linear supply. If it works for you, then great!
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Andrew
Sent: Saturday, August 06, 2005 10:20 PM
To: Repeater-Builder@yahoogroups.com
Subject:
I have a spectrum 220 rec. It worked well in a site by it self. But
once I transferred it to the main site ful of wonderful pager Tx and
other com repeaters in the same site. Forgetaboutit. Regardless of how
much filtering. So we went to a Micor Rec. Problem solved.
Rich/N2ROW
>>> [EMAIL PROTECTE
Yes and Yes
Richard D. Reese
http://www.wa8dbw.ifip.com
- Original Message -
From: "Mathew Quaife" <[EMAIL PROTECTED]>
To:
Sent: Thursday, July 28, 2005 4:14 PM
Subject: [Repeater-Builder] Vertex VX-5000 Repeater Information
> Can anyone tell me if the VX-5000 repea
connector housing. Then you'll need
to solder the wire to the pin, as it won't be reliable otherwise.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Ronny Julian
Sent: Tuesday, July 26, 2005 8:08 PM
To: Repeater-Builde
uld have missed it. The service manual says the
timer defaults to one minute.
By the way, when you say you didn't program the CCT, did you leave the field
blank, or did you put "No" in it?
I use one for packet radio, and all the signals I need are on the rear
connectors. Do you n
I run Outlook and I like it! THppttt
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Ken Arck
Sent: Tuesday, July 26, 2005 6:49 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Beagle Virus
s. I haven't tried it, but
entering "No" may (should?) disable the timer; the documentation doesn't
specifically mention it.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Doug Blizzard
Sent: Tuesday, Jul
Heh...
My ISP's virus filter caught it. No problem here at any rate, if they hadn't
caught it, my antivirus would have.
Richard, N7TGB
-Original Message-From:
Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED]On
Behalf Of Kevin CusterSent: Tuesday, Jul
It might be the transmit
time out timer in the Phoenix that is causing it to drop
out.
Richard,
N7TGB
-Original Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED]On Behalf Of Doug
BlizzardSent: Tuesday, July 26, 2005 5:08 PMTo:
Repeater
I use my 7k with two full repeaters linked The Ids work fine evert 10 m
they go off one at a time. As far as the the Time out timer for
repeater 2 use what ever comers with your Tx.
Rich N2ROW
>>> [EMAIL PROTECTED] 7/18/05 6:46:54 PM >>>
The problem is that there is one timeout timer, one
carrier
I bought one about six months or so ago, but I don't remember where. Google
should turn something up for you, that's how I found it.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Bruce Nanney
Sent: Sunday, July 17,
I agree... I read the article on some Ham related web site, and there wasn't
much useful information in it, so it's too bad we can't see the "film at
eleven."
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED]
Do you have a link to the article?
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of mch
Sent: Wednesday, July 13, 2005 11:05 PM
To: repeater-builder@yahoogroups.com
Subject: [Repeater-Builder] OT: NC man charged with 'driv
Are you sure it isn't something caused by your service monitor? Have you
tried a different one, or is there anything else common to all three radios?
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Paul Kelley
Sent: Sat
the middle.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Paul Finch
Sent: Wednesday, June 22, 2005 7:49 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] OT-IFR 1100 Info?
Richard,
Did they enlarge th
I have a .pdf copy of the operating manual for my IFR, and I had it printed
through Kinko's. It cost somewhere in the neighborhood of $20.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Paul Finch
Sent: Wednesday, Ju
You might try this guy; I bought an IFR1200S service manual from him, it was
in almost new condition.
lewis porter [mailto:[EMAIL PROTECTED]
Lew's Resale 3737 West Ferdinand StreetChicago, IL 60624Phone:
773-220-6000After 6PM: 773-638-4987Fax: 773-826-1845
Richard, N7TGB
-Ori
isn't
likely to happen soon, with all the irons I have in the fire now!
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Coy Hilton
Sent: Thursday, June 16, 2005 4:56 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-B
It was
(is?) the other way around, Radio Shack bought Allied.
Richard, N7TGB
-Original Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED]On Behalf Of Kenneth
CookSent: Thursday, June 16, 2005 10:11 AMTo:
Repeater-Builder@yahoogroups.comSubject
is your friend!) and came up with these
hits; one of them is about firewalls, the other says the error indicates a
connectivity problem.
<http://www.echolinker.com/forums/archive/index.php/t-606.html>
and
<http://echolinker.com/forums/showthread.php?t=709>
Hope they help.
Richard, N7T
Make sure the ports are forwarded to the computer that you are setting up.
Also, you can only have one Echolink node per ip address, so if it is still
running on your w2k computer, try closing that one.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto
dio,
etc), just for the satisfaction of seeing the confused looks or to
impress them.
When
Radio Shack stops selling parts, I'll have to mail order
everything.
Richard, N7TGB
-Original Message-From:
Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED]On
Behalf Of
Actually I was referring to the static on the screen, but I believe you're
right about the direction of spin in the hemispheres. So what does the
static on the TV do during a tornado event?
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROT
So if you are in the southern hemisphere, does it spin in a counterclockwise
direction? Funny... my wife grew up in tornado country and she never
mentioned that!
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Coy Hilton
Sent
programming ability to do anything but continuously or none at
all..I have the service manual but thought someone could save me some
time and effort locating the spot.Thanks in advance.
Richard D. Reesehttp://www.wa8dbw.ifip.com
Yahoo! Groups Links
To visit your group on the web, go
Heh... Yes, it is interesting to have lived long enough to have seen
changes, but it is also good to go along with those changes instead of
staying firmly mired in the past. As I recall, the cycle-hertz change was
made sometime in the 60s.
Richard, N7TGB
-Original Message-
From
KiloHertz is the correct term!
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of DCFluX
Sent: Saturday, May 21, 2005 7:17 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: RE : Re: [Repeater-Builder] Poor Repeater RX
Don
Wow. Here in Reno, NV it is $2.49.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of mch
Sent: Thursday, May 19, 2005 1:10 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Dayton check list
For the
Send me a copy and I will post it on my site in mpeg.
73 Rich
Richard D. Reese
http://www.wa8dbw.ifip.com
- Original Message -
From: "egrp_reader" <[EMAIL PROTECTED]>
To:
Sent: Saturday, May 14, 2005 1:42 AM
Subject: [Repeater-Builder] Re: Morse Code Contest on JAY LE
Mark;
ASP / Antenna Specialist was purchased by Andrew and the antenna is still a
production model. I have used several in amateur as well as commercial
service. The specifications sheet is available at :
http://www.wa8dbw.ifip.com/ASPD-701.pdf
73
Richard D. Reese
http
Several hits on Google if you plug in the model number
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of kg4ogn
Sent: Sunday, April 24, 2005 5:09 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Antenna
sheet available to anyone requesting it. I have
been told that a 2n6621 will also replace the MRF-901 but I have not tried
that device.
Richard D. Reese
http://www.wa8dbw.ifip.com/Scholarship_Happenings.htm
Yahoo! Groups Links
<*> To visit your group on the web, go to:
Do you still need a MRF-901? Let me know. I still have some in one of the
parts bins.
Richard D. Reese
http://www.wa8dbw.ifip.com
- Original Message -
From: "kc4wgh" <[EMAIL PROTECTED]>
To:
Sent: Friday, April 08, 2005 11:59 AM
Subject: [Repeater-Builder] GLB Part
Sorry the last was meant to go direct to John Portz and not the list.
Richard D. Reese
http://www.wa8dbw.ifip.com
- Original Message -
From: "John Portz" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, March 29, 2005 10:21 AM
Subject: RE: [Repeater-Builder] A Good 440 Anttena
Hello John.
Long time no hear. Are you still at Warner Robins??
What have you been up to?
Give me your phone number and I will give you a call. Let me know the best
time.
&3
Dick Reese
Richard D. Reese
http://www.wa8dbw.ifip.com
- Original Message -
From: "John Portz
That's what you get for hiring a plumber to install it!
Richard, N7TGB
-Original Message-
From: Brent [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 29, 2005 9:22 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] leak proof connector :)
NOPE he HAD wr
Chuck is correct. The 413 is 18 ft 4 inches long and is rated 12 dB gain
and rated to survive 1/2 inch ice at 90 mph.
The 411 is 9 ft 5 inches long , 9 dB gain 112 mph wind with 1/2 inch radial
ice.
The 408 is 6.6 dB gain and will survive with 1/2 ice at 85 mph.
The 420 is 9.2 dB gain 18 ft 1
hem to print (single sided). I got it in the
mail a few days later and spent about twenty minutes reordering the
pages.
http://www.n7tgb.net/pages/radio/radio_resource.htm
Richard, N7TGB
-Original Message-From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]Sent: Sunday, March 2
I've
got a .pdf copy of it. Let me know if you want it.
Richard, N7TGB
-Original Message-From: Doug Zastrow
[mailto:[EMAIL PROTECTED]Sent: Sunday, March 27, 2005 5:22
AMTo: repeater-builder@yahoogroups.comSubject:
[Repeater-Builder] IFR FM/AM-1200S Service Mo
We
have an Easter get-together planned so things will get hectic on this
end.
Rich
Richard D. Reesehttp://www.wa8dbw.ifip.com
- Original Message -
From:
Chuck Kelsey
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, March 26, 2005 6:47
AM
Subject: Re:
removed it from
his tower for maintenance. He is now ready to place it back on the tower
legs and asked me what the spacing is between elements. Well I cannot fond
the paper work. I think it was 23 inches on center. Chuck, is that
correct?
Thanks in advance.
Rich WA8DBW
Richard D
Kevin and all;
I am not often moved to post as I try and remember that which was told to me
as a child - "Richard, you have two ears and one mouth so it would behoove
you to listen twice as much as you talk. Also be mindful of the fact that
the ears are always open and can except inp
201 - 300 of 413 matches
Mail list logo