W dniu 01.04.2011 14:50, Richard Elling pisze:
On Apr 1, 2011, at 4:23 AM, For@ll wrote:
Hi,
LUN is connected to solaris 10u9 from NETAP FAS2020a with ISCSI. I'm changing
LUN size on netapp and solaris format see new value but zpool still have old
value.
I tryed zpool export and zpool
try to export and next import your volume.
2011/4/4 For@ll for...@stalowka.info
W dniu 01.04.2011 14:50, Richard Elling pisze:
On Apr 1, 2011, at 4:23 AM, For@ll wrote:
Hi,
LUN is connected to solaris 10u9 from NETAP FAS2020a with ISCSI. I'm
changing LUN size on netapp and solaris
W dniu 04.04.2011 11:56, eXeC001er pisze:
try to export and next import your volume.
This is already doing, but effect is the same, no effect.
___
zfs-discuss mailing list
zfs-discuss@opensolaris.org
On Mon, Apr 4, 2011 at 4:49 PM, For@ll for...@stalowka.info wrote:
What can I do that zpool show new value?
zpool set autoexpand=on TEST
zpool set autoexpand=off TEST
-- richard
I tried your suggestion, but no effect.
Did you modify the partition table?
IIRC if you pass a DISK to zpool
W dniu 04.04.2011 12:44, Fajar A. Nugraha pisze:
On Mon, Apr 4, 2011 at 4:49 PM, For@llfor...@stalowka.info wrote:
What can I do that zpool show new value?
zpool set autoexpand=on TEST
zpool set autoexpand=off TEST
-- richard
I tried your suggestion, but no effect.
Did you modify the
I tried your suggestion, but no effect.
Did you modify the partition table?
IIRC if you pass a DISK to zpool create, it would create
partition/slice on it, either with SMI (the default for rpool) or EFI
(the default for other pool). When the disk size changes (like when
you change LUN
On Mon, Apr 4, 2011 at 7:58 PM, Roy Sigurd Karlsbakk r...@karlsbakk.net wrote:
IIRC if you pass a DISK to zpool create, it would create
partition/slice on it, either with SMI (the default for rpool) or EFI
(the default for other pool). When the disk size changes (like when
you change LUN size
On Mon, Apr 4, 2011 at 6:48 PM, For@ll for...@stalowka.info wrote:
When I test with openindiana b148, simply setting zpool set
autoexpand=on is enough (I tested with Xen, and openinidiana reboot is
required). Again, you might need to set both autoexpand=on and
resize partition slice.
As a
LUN is connected to solaris 10u9 from NETAP FAS2020a with ISCSI. I'm
changing LUN size on netapp and solaris format see new value but zpool
still have old value.
I tryed zpool export and zpool import but it didn't resolve my
problem.
bash-3.00# format
Searching for disks...done
W dniu 04.04.2011 12:44, Fajar A. Nugraha pisze:
On Mon, Apr 4, 2011 at 4:49 PM, For@llfor...@stalowka.info wrote:
What can I do that zpool show new value?
zpool set autoexpand=on TEST
zpool set autoexpand=off TEST
-- richard
I tried your suggestion, but no effect.
Did you modify the
IIRC if you pass a DISK to zpool create, it would create
partition/slice on it, either with SMI (the default for rpool) or
EFI
(the default for other pool). When the disk size changes (like when
you change LUN size on storage node side), you PROBABLY need to
resize
the
Hi Albert,
I didn't notice that you are running the Solaris 10 9/10 release.
Although the autoexpand property is provided, the underlying driver
changes to support the LUN expansion are not available in this release.
I don't have the right storage to test, but a possible workaround is
to
Hi,
LUN is connected to solaris 10u9 from NETAP FAS2020a with ISCSI. I'm
changing LUN size on netapp and solaris format see new value but zpool
still have old value.
I tryed zpool export and zpool import but it didn't resolve my problem.
bash-3.00# format
Searching for disks...done
Hi,
LUN is connected to solaris 10u9 from NETAP FAS2020a with ISCSI. I'm
changing LUN size on netapp and solaris format see new value but
zpool
still have old value.
I tryed zpool export and zpool import but it didn't resolve my
problem.
bash-3.00# format
Searching for disks...done
W dniu 01.04.2011 14:28, Mailing Lists pisze:
Hi,
LUN is connected to solaris 10u9 from NETAP FAS2020a with ISCSI. I'm
changing LUN size on netapp and solaris format see new value but
zpool
still have old value.
I tryed zpool export and zpool import but it didn't resolve my
problem.
On Apr 1, 2011, at 4:23 AM, For@ll wrote:
Hi,
LUN is connected to solaris 10u9 from NETAP FAS2020a with ISCSI. I'm changing
LUN size on netapp and solaris format see new value but zpool still have old
value.
I tryed zpool export and zpool import but it didn't resolve my problem.
16 matches
Mail list logo