Re: [AFMUG] Showdown coming on Ethernet standard to serve faster Wi-Fi | PCWorld
Not a bad publicity stunt to temporarily set up a customer with a $1200 mikrotik router with SFP+ port, and a desktop PC with a 10GbE PCI-Express card... free advertising, eh. On Tue, Dec 2, 2014 at 7:17 PM, Sterling Jacobson via Af af@afmug.com wrote: That’s pretty cool. I’m ready to deliver 10Gbps SFP+ to the side of customer’s houses. But since it tranceives to copper, I was going to be limited. This would help, esp if a cheap transceiver is made between SFP+ and the new copper standard. *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Jaime Solorza via Af *Sent:* Tuesday, December 02, 2014 8:08 PM *To:* Animal Farm *Subject:* [AFMUG] Showdown coming on Ethernet standard to serve faster Wi-Fi | PCWorld http://www.pcworld.com/article/2854692/showdown-coming-on-ethernet-standard-to-serve-faster-wifi.html Jaime Solorza
Re: [AFMUG] Mimosa
Sorry guys, been advocating in DC for WISPA. TCP Yes you can disable the 2.4 WiFi. Regards, Chuck On Tue, Dec 2, 2014 at 11:07 PM, Eric Kuhnke via Af af@afmug.com wrote: Can you entirely disable the 2.4 GHz local wifi AP radio if desired? On Mon, Dec 1, 2014 at 1:27 PM, Chuck Hogg via Af af@afmug.com wrote: Yes. We installed 3 of these links on a very heavily congested tower, with about 5' of vertical separation, with very little available 5GHz spectrum. It found spectrum that it liked, however it created some issues for our other links on this same tower. We had to still do some frequency planning to avoid disruption to existing links. All the cloud tools we have seen at tradeshows are working as described previously. 2x20MHz Channel, 346.7Mbit PHY Rate, B5 Integrated, 3.64 miles. 2x20MHz Channel, 173.3Mbit PHY Rate, B5C, 14.73 miles. (This link may be misaligned still) 2x20MHz Channel, 260Mbit PHY Rate, B5C, 14.39 miles. 2x20MHz Channel, 231.1Mbit PHY Rate, B5, 8.72 miles. I installed 3 of these myself. I found the installation process to be relatively easy, and they have some neat little tweaks. The WiFi alignment via iPhone was also helpful. Additionally, ground crew was also able to login to the 2.4GHz Wifi. Regards, Chuck On Mon, Dec 1, 2014 at 4:15 PM, Stefan Englhardt via Af af@afmug.com wrote: Does it work? With all promised features. On Mon, Dec 1, 2014 at 4:09 PM, Chuck Hogg via Af af@afmug.com wrote: Well...I just got told I could disclose this information... Official position, units start shipping to EAP customers by the end of this week. Secondly, I was given permission to disclose we have deployed 4 PtP links already of both B5 and B5C...questions? Regards, Chuck On Mon, Dec 1, 2014 at 10:25 AM, Rory Conaway via Af af@afmug.com wrote: Unlike some vendors, I think they are just taking their time on the firmware to make sure it’s right. It’s kind of a damned if you do, damned if you don’t scenario. If you remember, it took several Ubiquiti quite a long time on the M series to get past some chipset features and the Quantenna chipset is pretty new. They are blazing the trail here the same as the Cambium products. Remember the delays on the 450 due to hardware? At this point I only get annoyed if I don’t know if there is any progress like AirControl or the 12 month old Beta firmware on AirGateways. Considering I’m using boatloads of them, I’d like to see it come out of Beta someday. Rory *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Stefan Englhardt via Af *Sent:* Monday, December 1, 2014 8:07 AM *To:* af@afmug.com *Subject:* [AFMUG] Mimosa Got a call from our distributor. Next delivery date for our B5 link is mid of January. Hope they have enough capital to live without selling anything. We’ve not paid anything so we’ve no real problem with this.
Re: [AFMUG] OT: RC Cars
60 mph is slow now days. Traxxas XO-1 does over 100 straight out of the box. My son has one. Wicked fast. Search YouTube all kinds of videos. Such as this sales infomercial… https://www.youtube.com/watch?v=oX1Ij92s_Sk Rex From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jeremy via Af Sent: Tuesday, December 02, 2014 9:01 PM To: af@afmug.com Subject: Re: [AFMUG] OT: RC Cars These high end hobby cars can go like 60mph. I think they ALL can break if you crash them at 60mph. On Tue, Dec 2, 2014 at 3:27 PM, Jason McKemie via Af af@afmug.com wrote: I picked up a Team Losi rtr nitro truck, which was friggin awesome, but was a bit tricky to get started sometimes - I'm not great with the carb settings. For cheap/easy fun, these are great: http://www.rcuniverse.com/product_guide/carprofile.cfm?car_id=166 You can load them up with all the standard motors, servos, electronics, etc, and they're dead simple to work on. On Tuesday, December 2, 2014, Nate Burke via Af af@afmug.com wrote: That one looks cool. I also found this which looks like it meets most of what people were talking about. http://www.amazon.com/Redcat-Racing-Brushless-Electric-Included/dp/B00HVBVNQG/ref=sr_1_132?s=toys-and-games http://www.amazon.com/Redcat-Racing-Brushless-Electric-Included/dp/B00HVBVNQG/ref=sr_1_132?s=toys-and-gamesie=UTF8qid=1417477082sr=1-132keywords=RC+Car ie=UTF8qid=1417477082sr=1-132keywords=RC+Car $200 Brushless motor, waterproof, RTR. Says that it's similar speed to a nitro (which I read as I crash it a lot more while I'm learning to run it). On 12/2/2014 3:00 AM, thouin--- via Af wrote: I Used to have a nitro rc car. Was lots of fun because i liked fixing it. If you only budget 200 bux u will be disapointed. When i got out of it everything was going electric because is was faster and less fiddling. I haven't read any reviews but the 1/16 erevo seems to meet your requirements. http://www3.towerhobbies.com/cgi-bin/wti0001p? http://www3.towerhobbies.com/cgi-bin/wti0001p?I=LXEWPCBBP=0 I=LXEWPCBBP=0 would take you a little over budget. You also didn't say weither you wanted a kit or a rtr. I would opt for the brushless version of it. But u might want to get an aftermarket after a bit anyway. BTW used to have a 1/10 nitro revo and it was awesome. Some of the older traxxas cars where junk though. Good luck, Tyler --- Original Message --- From: Erich Kaiser via Af[mailto:af@afmug.com] Sent: 12/1/2014 8:27:39 PM To : af@afmug.com Cc : Subject : RE: Re: [AFMUG] OT: RC Cars I would go to the local hobby store, typically those guys know a lot about this stuff, at least that is how it used to be 20 years ago. When I was into this stuff, the ultimate was having a gas powered RC truck/car, but I never had one :( HobbyTown USA 2061A Lincoln HighwaySt. Charles, IL 60174 https://www.google.com/maps/dir/''/hobby+town+st+charles+il/@41.8816195,-88.3344586,13z/data=!4m8!4m7!1m0!1m5!1m1!1s0x880f026f561d981b:0xc63b9d2e750c7157!2m2 !1d-88.338063!2d41.899515 On Mon, Dec 1, 2014 at 5:48 PM, Nate Burke via Af af@afmug.com wrote: For a long time I've wanted an RC car. I was at the beach over the weekend, and saw a guy running one through the sand and jumping it around and it looked really fun. I think I'm finally in a position in life where I can allow myself to get one. I'm thinking I may want one step above one you can buy at a big- box, but I also don't plan on making it into a hobby. Any pointers for a guy who just wants to run a car around sometimes? Some things I think I want, unless I'm told I'm wrong. 4wd Ability to cross sand/mud/shallow water (does this mean waterproof?) Won't break if it flips/crashes. 100 yard range. Rechargeable battery Anything specific to look for? Anything to stay away from? I'm hoping to keep this little endeavor around $200, that way I don't have to go through all the requisition forms and justification analysis with the wife. Nate
Re: [AFMUG] Mimosa
Go chuck! Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr From: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Reply-To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Date: Wednesday, December 3, 2014 at 9:52 AM To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] Mimosa Sorry guys, been advocating in DC for WISPA. TCP Yes you can disable the 2.4 WiFi. Regards, Chuck On Tue, Dec 2, 2014 at 11:07 PM, Eric Kuhnke via Af af@afmug.commailto:af@afmug.com wrote: Can you entirely disable the 2.4 GHz local wifi AP radio if desired? On Mon, Dec 1, 2014 at 1:27 PM, Chuck Hogg via Af af@afmug.commailto:af@afmug.com wrote: Yes. We installed 3 of these links on a very heavily congested tower, with about 5' of vertical separation, with very little available 5GHz spectrum. It found spectrum that it liked, however it created some issues for our other links on this same tower. We had to still do some frequency planning to avoid disruption to existing links. All the cloud tools we have seen at tradeshows are working as described previously. 2x20MHz Channel, 346.7Mbit PHY Rate, B5 Integrated, 3.64 miles. 2x20MHz Channel, 173.3Mbit PHY Rate, B5C, 14.73 miles. (This link may be misaligned still) 2x20MHz Channel, 260Mbit PHY Rate, B5C, 14.39 miles. 2x20MHz Channel, 231.1Mbit PHY Rate, B5, 8.72 miles. I installed 3 of these myself. I found the installation process to be relatively easy, and they have some neat little tweaks. The WiFi alignment via iPhone was also helpful. Additionally, ground crew was also able to login to the 2.4GHz Wifi. Regards, Chuck On Mon, Dec 1, 2014 at 4:15 PM, Stefan Englhardt via Af af@afmug.commailto:af@afmug.com wrote: Does it work? With all promised features. On Mon, Dec 1, 2014 at 4:09 PM, Chuck Hogg via Af af@afmug.commailto:af@afmug.com wrote: Well...I just got told I could disclose this information... Official position, units start shipping to EAP customers by the end of this week. Secondly, I was given permission to disclose we have deployed 4 PtP links already of both B5 and B5C...questions? Regards, Chuck On Mon, Dec 1, 2014 at 10:25 AM, Rory Conaway via Af af@afmug.commailto:af@afmug.com wrote: Unlike some vendors, I think they are just taking their time on the firmware to make sure it’s right. It’s kind of a damned if you do, damned if you don’t scenario. If you remember, it took several Ubiquiti quite a long time on the M series to get past some chipset features and the Quantenna chipset is pretty new. They are blazing the trail here the same as the Cambium products. Remember the delays on the 450 due to hardware? At this point I only get annoyed if I don’t know if there is any progress like AirControl or the 12 month old Beta firmware on AirGateways. Considering I’m using boatloads of them, I’d like to see it come out of Beta someday. Rory From: Af [mailto:af-boun...@afmug.commailto:af-boun...@afmug.com] On Behalf Of Stefan Englhardt via Af Sent: Monday, December 1, 2014 8:07 AM To: af@afmug.commailto:af@afmug.com Subject: [AFMUG] Mimosa Got a call from our distributor. Next delivery date for our B5 link is mid of January. Hope they have enough capital to live without selling anything. We’ve not paid anything so we’ve no real problem with this.
[AFMUG] OPEN SLOT TODAY on ISPRADIO
Well we had our guest today back out at the last min, so looking for anyone that would be interested in chatting, talking about industry, whatever topics! Shoot me a e-mail off-list if interested, we do the show via skype at 11am CST! Most of the time you will have around 40-50 min to talk and discuss . . send me a e-mail on the topic you want to talk about and if you are free! Thanks, www.linktechs.net - 314-735-0270 - dmburg...@linktechs.net
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
I can come on and complain about things On Wed, Dec 3, 2014 at 8:58 AM, Dennis Burgess via Af af@afmug.com wrote: Well we had our guest today back out at the last min, so looking for anyone that would be interested in chatting, talking about industry, whatever topics! Shoot me a e-mail off-list if interested, we do the show via skype at 11am CST! Most of the time you will have around 40-50 min to talk and discuss . . send me a e-mail on the topic you want to talk about and if you are free! Thanks, [image: DennisBurgessSignature] www.linktechs.net – 314-735-0270 – dmburg...@linktechs.net -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
ISIS Ferguson Obamacare Let’s hear your views! From: That One Guy via Af Sent: Wednesday, December 03, 2014 8:02 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO I can come on and complain about things On Wed, Dec 3, 2014 at 8:58 AM, Dennis Burgess via Af af@afmug.com wrote: Well we had our guest today back out at the last min, so looking for anyone that would be interested in chatting, talking about industry, whatever topics! Shoot me a e-mail off-list if interested, we do the show via skype at 11am CST! Most of the time you will have around 40-50 min to talk and discuss . . send me a e-mail on the topic you want to talk about and if you are free! Thanks, www.linktechs.net – 314-735-0270 – dmburg...@linktechs.net -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
Ok, maybe not those kinds of views! WISP/ISP related J Dennis Burgess, CTO, Link Technologies, Inc. den...@linktechs.net mailto:den...@linktechs.net – 314-735-0270 – www.linktechs.net http://www.linktechs.net From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown via Af Sent: Wednesday, December 03, 2014 9:04 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO ISIS Ferguson Obamacare Let’s hear your views! From: That One Guy via Af mailto:af@afmug.com Sent: Wednesday, December 03, 2014 8:02 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO I can come on and complain about things On Wed, Dec 3, 2014 at 8:58 AM, Dennis Burgess via Af af@afmug.com wrote: Well we had our guest today back out at the last min, so looking for anyone that would be interested in chatting, talking about industry, whatever topics! Shoot me a e-mail off-list if interested, we do the show via skype at 11am CST! Most of the time you will have around 40-50 min to talk and discuss . . send me a e-mail on the topic you want to talk about and if you are free! Thanks, www.linktechs.net – 314-735-0270 – dmburg...@linktechs.net -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
Yes! this sounds excellent. From: Af [af-boun...@afmug.com] on behalf of Chuck McCown via Af [af@afmug.com] Sent: Wednesday, December 03, 2014 9:03 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO ISIS Ferguson Obamacare Let’s hear your views! From: That One Guy via Afmailto:af@afmug.com Sent: Wednesday, December 03, 2014 8:02 AM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO I can come on and complain about things On Wed, Dec 3, 2014 at 8:58 AM, Dennis Burgess via Af af@afmug.commailto:af@afmug.com wrote: Well we had our guest today back out at the last min, so looking for anyone that would be interested in chatting, talking about industry, whatever topics! Shoot me a e-mail off-list if interested, we do the show via skype at 11am CST! Most of the time you will have around 40-50 min to talk and discuss . . send me a e-mail on the topic you want to talk about and if you are free! Thanks, [DennisBurgessSignature] www.linktechs.nethttp://www.linktechs.net – 314-735-0270tel:314-735-0270 – dmburg...@linktechs.netmailto:dmburg...@linktechs.net -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
UFO cover up Lame Big Foot series Even Lamer Do Nothing Congress Jaime Solorza On Dec 3, 2014 8:04 AM, Chuck McCown via Af af@afmug.com wrote: ISIS Ferguson Obamacare Let’s hear your views! *From:* That One Guy via Af af@afmug.com *Sent:* Wednesday, December 03, 2014 8:02 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO I can come on and complain about things On Wed, Dec 3, 2014 at 8:58 AM, Dennis Burgess via Af af@afmug.com wrote: Well we had our guest today back out at the last min, so looking for anyone that would be interested in chatting, talking about industry, whatever topics! Shoot me a e-mail off-list if interested, we do the show via skype at 11am CST! Most of the time you will have around 40-50 min to talk and discuss . . send me a e-mail on the topic you want to talk about and if you are free! Thanks, [image: DennisBurgessSignature] www.linktechs.net – 314-735-0270 – dmburg...@linktechs.net -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
Re: [AFMUG] ISP Radio Wednesday -- Yaana - Raj Puri
Yep already fixed .. J Dennis Burgess, CTO, Link Technologies, Inc. den...@linktechs.net mailto:den...@linktechs.net – 314-735-0270 – www.linktechs.net http://www.linktechs.net From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Luthman via Af Sent: Tuesday, December 02, 2014 4:32 PM To: af@afmug.com Subject: Re: [AFMUG] ISP Radio Wednesday -- Yaana - Raj Puri Yes 403 - Forbidden: Access is denied. You do not have permission to view this directory or page using the credentials that you supplied. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Dec 2, 2014 at 5:24 PM, joseph marsh via Af af@afmug.com wrote: Is there something wrong with ispradio.com? On Dec 2, 2014 3:58 PM, Dennis Burgess via Af af@afmug.com wrote: http://www.ispradio.com/ http://www.ispradio.com/ http://www.ispradio.com/ This week we will be talking with COE of Yaana Raj Puri 11am CST, 9am PST ! Don’t forgot you can download the previous episodes to put on your media player and listen while in your car free of charge by going to www.ispradio.com http://www.ispradio.comRemember to sign into the live chat to ask questions! n UPCOMMING SHOWS! n December 10th – Matt Larson on LTE-U, Harm Claim Thresholds and Spectrum Databases. n December 17th – Daina Larken with NetSapians n December 24th – No Show –Happy Holidays n January 28th – Patrick Leary with Telrad Dennis Burgess, Co-Host of ISP Radio! http://www.ispradio.com http://www.ispradio.com
[AFMUG] Mounting sync pipe on steel, safe?
I've got all the gear up on the roof and I didn't think to ask before if it is all right to have a sync pipe mounted to a 3 galvanized steel pipe on the top. Very clear sky view but I wasn't sure I'd the steel would effect the GPS like it does a compass. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Re: [AFMUG] Mounting sync pipe on steel, safe?
It will not throw it off or affect its accuracy. It will only interfere with the RX signal if it is in the path. GPS is nothing more than a 1 GHz antenna and processor. From: Josh Luthman via Af Sent: Wednesday, December 03, 2014 8:21 AM To: af@afmug.com Subject: [AFMUG] Mounting sync pipe on steel, safe? I've got all the gear up on the roof and I didn't think to ask before if it is all right to have a sync pipe mounted to a 3 galvanized steel pipe on the top. Very clear sky view but I wasn't sure I'd the steel would effect the GPS like it does a compass. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Re: [AFMUG] Mounting sync pipe on steel, safe?
Sweet glad to hear that. Thanks. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 3, 2014 10:25 AM, Chuck McCown via Af af@afmug.com wrote: It will not throw it off or affect its accuracy. It will only interfere with the RX signal if it is in the path. GPS is nothing more than a 1 GHz antenna and processor. *From:* Josh Luthman via Af af@afmug.com *Sent:* Wednesday, December 03, 2014 8:21 AM *To:* af@afmug.com *Subject:* [AFMUG] Mounting sync pipe on steel, safe? I've got all the gear up on the roof and I didn't think to ask before if it is all right to have a sync pipe mounted to a 3 galvanized steel pipe on the top. Very clear sky view but I wasn't sure I'd the steel would effect the GPS like it does a compass. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
Have someone from Ubiquiti on to explain why in God's name they thought a cloud platform is what people wanted. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Dennis Burgess via Af af@afmug.com To: af@afmug.com Sent: Wed, 03 Dec 2014 08:58:23 -0600 (CST) Subject: [AFMUG] OPEN SLOT TODAY on ISPRADIO Well we had our guest today back out at the last min, so looking for anyone that would be interested in chatting, talking about industry, whatever topics! Shoot me a e-mail off-list if interested, we do the show via skype at 11am CST! Most of the time you will have around 40-50 min to talk and discuss . . send me a e-mail on the topic you want to talk about and if you are free! Thanks, www.linktechs.net - 314-735-0270 - dmburg...@linktechs.net
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
On 12/3/14, 7:39 AM, Mike Hammett via Af wrote: Have someone from Ubiquiti on to explain why in God's name they thought a cloud platform is what people wanted. CLOUD: because you will want it. ~Seth
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
You need periwinkle... -Original Message- From: Seth Mattinen via Af Sent: Wednesday, December 03, 2014 8:41 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO On 12/3/14, 7:39 AM, Mike Hammett via Af wrote: Have someone from Ubiquiti on to explain why in God's name they thought a cloud platform is what people wanted. CLOUD: because you will want it. ~Seth
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
(the periwinkle reference) http://www.ispot.tv/ad/7rk6/justfab-com-buy-1-get-1-free-they-arent-just-shoes -Original Message- From: Chuck McCown via Af Sent: Wednesday, December 03, 2014 8:43 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need periwinkle... -Original Message- From: Seth Mattinen via Af Sent: Wednesday, December 03, 2014 8:41 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO On 12/3/14, 7:39 AM, Mike Hammett via Af wrote: Have someone from Ubiquiti on to explain why in God's name they thought a cloud platform is what people wanted. CLOUD: because you will want it. ~Seth
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
Oh wow. That commercial is depressing. -Ty On Wed, Dec 3, 2014 at 9:47 AM, Chuck McCown via Af af@afmug.com wrote: (the periwinkle reference) http://www.ispot.tv/ad/7rk6/justfab-com-buy-1-get-1-free- they-arent-just-shoes -Original Message- From: Chuck McCown via Af Sent: Wednesday, December 03, 2014 8:43 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need periwinkle... -Original Message- From: Seth Mattinen via Af Sent: Wednesday, December 03, 2014 8:41 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO On 12/3/14, 7:39 AM, Mike Hammett via Af wrote: Have someone from Ubiquiti on to explain why in God's name they thought a cloud platform is what people wanted. CLOUD: because you will want it. ~Seth
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
Why? Let the girls be girls and have all the shoes they want… as long as you can have how many x you what In my case, I have a wall of lego star wars.. 5 drones, 5 cars … so you get the point Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr From: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Reply-To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Date: Wednesday, December 3, 2014 at 11:49 AM To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO Oh wow. That commercial is depressing. -Ty On Wed, Dec 3, 2014 at 9:47 AM, Chuck McCown via Af af@afmug.commailto:af@afmug.com wrote: (the periwinkle reference) http://www.ispot.tv/ad/7rk6/justfab-com-buy-1-get-1-free-they-arent-just-shoes -Original Message- From: Chuck McCown via Af Sent: Wednesday, December 03, 2014 8:43 AM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need periwinkle... -Original Message- From: Seth Mattinen via Af Sent: Wednesday, December 03, 2014 8:41 AM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO On 12/3/14, 7:39 AM, Mike Hammett via Af wrote: Have someone from Ubiquiti on to explain why in God's name they thought a cloud platform is what people wanted. CLOUD: because you will want it. ~Seth
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
You need surge suppressors ... From: Gino Villarini via Af Sent: Wednesday, December 03, 2014 8:54 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO Why? Let the girls be girls and have all the shoes they want… as long as you can have how many x you what In my case, I have a wall of lego star wars.. 5 drones, 5 cars … so you get the point Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr From: af@afmug.com af@afmug.com Reply-To: af@afmug.com af@afmug.com Date: Wednesday, December 3, 2014 at 11:49 AM To: af@afmug.com af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO Oh wow. That commercial is depressing. -Ty On Wed, Dec 3, 2014 at 9:47 AM, Chuck McCown via Af af@afmug.com wrote: (the periwinkle reference) http://www.ispot.tv/ad/7rk6/justfab-com-buy-1-get-1-free-they-arent-just-shoes -Original Message- From: Chuck McCown via Af Sent: Wednesday, December 03, 2014 8:43 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need periwinkle... -Original Message- From: Seth Mattinen via Af Sent: Wednesday, December 03, 2014 8:41 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO On 12/3/14, 7:39 AM, Mike Hammett via Af wrote: Have someone from Ubiquiti on to explain why in God's name they thought a cloud platform is what people wanted. CLOUD: because you will want it. ~Seth
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
You're right I'm sure. After Black Friday this year I am a little put off by blind consumerism. The plain idea of I need more things is off-putting to me. It'll pass. -Ty On Wed, Dec 3, 2014 at 9:54 AM, Gino Villarini via Af af@afmug.com wrote: Why? Let the girls be girls and have all the shoes they want… as long as you can have how many x you what In my case, I have a wall of lego star wars.. 5 drones, 5 cars … so you get the point Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr From: af@afmug.com af@afmug.com Reply-To: af@afmug.com af@afmug.com Date: Wednesday, December 3, 2014 at 11:49 AM To: af@afmug.com af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO Oh wow. That commercial is depressing. -Ty On Wed, Dec 3, 2014 at 9:47 AM, Chuck McCown via Af af@afmug.com wrote: (the periwinkle reference) http://www.ispot.tv/ad/7rk6/justfab-com-buy-1-get-1-free- they-arent-just-shoes -Original Message- From: Chuck McCown via Af Sent: Wednesday, December 03, 2014 8:43 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need periwinkle... -Original Message- From: Seth Mattinen via Af Sent: Wednesday, December 03, 2014 8:41 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO On 12/3/14, 7:39 AM, Mike Hammett via Af wrote: Have someone from Ubiquiti on to explain why in God's name they thought a cloud platform is what people wanted. CLOUD: because you will want it. ~Seth
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
But... You NEED surge suppressors... From: Ty Featherling via Af Sent: Wednesday, December 03, 2014 9:04 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You're right I'm sure. After Black Friday this year I am a little put off by blind consumerism. The plain idea of I need more things is off-putting to me. It'll pass. -Ty On Wed, Dec 3, 2014 at 9:54 AM, Gino Villarini via Af af@afmug.com wrote: Why? Let the girls be girls and have all the shoes they want… as long as you can have how many x you what In my case, I have a wall of lego star wars.. 5 drones, 5 cars … so you get the point Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr From: af@afmug.com af@afmug.com Reply-To: af@afmug.com af@afmug.com Date: Wednesday, December 3, 2014 at 11:49 AM To: af@afmug.com af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO Oh wow. That commercial is depressing. -Ty On Wed, Dec 3, 2014 at 9:47 AM, Chuck McCown via Af af@afmug.com wrote: (the periwinkle reference) http://www.ispot.tv/ad/7rk6/justfab-com-buy-1-get-1-free-they-arent-just-shoes -Original Message- From: Chuck McCown via Af Sent: Wednesday, December 03, 2014 8:43 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need periwinkle... -Original Message- From: Seth Mattinen via Af Sent: Wednesday, December 03, 2014 8:41 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO On 12/3/14, 7:39 AM, Mike Hammett via Af wrote: Have someone from Ubiquiti on to explain why in God's name they thought a cloud platform is what people wanted. CLOUD: because you will want it. ~Seth
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
Im with you on the black Friday excess… is way too overboard.. People fight for stuff? Really? Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr From: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Reply-To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Date: Wednesday, December 3, 2014 at 12:04 PM To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You're right I'm sure. After Black Friday this year I am a little put off by blind consumerism. The plain idea of I need more things is off-putting to me. It'll pass. -Ty On Wed, Dec 3, 2014 at 9:54 AM, Gino Villarini via Af af@afmug.commailto:af@afmug.com wrote: Why? Let the girls be girls and have all the shoes they want… as long as you can have how many x you what In my case, I have a wall of lego star wars.. 5 drones, 5 cars … so you get the point Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.comhttp://www.aeronetpr.com @aeronetpr From: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Reply-To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Date: Wednesday, December 3, 2014 at 11:49 AM To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO Oh wow. That commercial is depressing. -Ty On Wed, Dec 3, 2014 at 9:47 AM, Chuck McCown via Af af@afmug.commailto:af@afmug.com wrote: (the periwinkle reference) http://www.ispot.tv/ad/7rk6/justfab-com-buy-1-get-1-free-they-arent-just-shoes -Original Message- From: Chuck McCown via Af Sent: Wednesday, December 03, 2014 8:43 AM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need periwinkle... -Original Message- From: Seth Mattinen via Af Sent: Wednesday, December 03, 2014 8:41 AM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO On 12/3/14, 7:39 AM, Mike Hammett via Af wrote: Have someone from Ubiquiti on to explain why in God's name they thought a cloud platform is what people wanted. CLOUD: because you will want it. ~Seth
Re: [AFMUG] Cold weather gloves
Jay, We use Mechanix gloves at 20-40 degrees. Have been for the last couple of weeks. I wear a large. http://www.amazon.com/Mechanix-Wear-MG-05-010-Original-Glove/dp/B0001VNZQY I've found that these give you the most dexterity out of all other gloves. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Dec 2, 2014 at 10:20 PM, Jaime Solorza via Af af@afmug.com wrote: Tundra line by Ironclad gloves Jaime Solorza On Dec 2, 2014 8:12 PM, Jay Weekley via Af af@afmug.com wrote: Now that we're approaching Winter in the great white North Alabama and Christmas is near I need some good cold weather gloves. Normally, the coldest we work in is the 20's (Fahrenheit) and I really would like to find something that allows me to work with small tools with reasonable dexterity but keep my hands warm. Any suggestions? Am I being unrealistic?
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
For some reason I have a sudden urge to order a some surge suppressors... From: Af [af-boun...@afmug.com] on behalf of Chuck McCown via Af [af@afmug.com] Sent: Wednesday, December 03, 2014 9:57 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need surge suppressors ... From: Gino Villarini via Afmailto:af@afmug.com Sent: Wednesday, December 03, 2014 8:54 AM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO Why? Let the girls be girls and have all the shoes they want… as long as you can have how many x you what In my case, I have a wall of lego star wars.. 5 drones, 5 cars … so you get the point Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr From: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Reply-To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Date: Wednesday, December 3, 2014 at 11:49 AM To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO Oh wow. That commercial is depressing. -Ty On Wed, Dec 3, 2014 at 9:47 AM, Chuck McCown via Af af@afmug.commailto:af@afmug.com wrote: (the periwinkle reference) http://www.ispot.tv/ad/7rk6/justfab-com-buy-1-get-1-free-they-arent-just-shoes -Original Message- From: Chuck McCown via Af Sent: Wednesday, December 03, 2014 8:43 AM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need periwinkle... -Original Message- From: Seth Mattinen via Af Sent: Wednesday, December 03, 2014 8:41 AM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO On 12/3/14, 7:39 AM, Mike Hammett via Af wrote: Have someone from Ubiquiti on to explain why in God's name they thought a cloud platform is what people wanted. CLOUD: because you will want it. ~Seth
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
And shoes From: Mathew Howard via Af Sent: Wednesday, December 03, 2014 9:16 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO For some reason I have a sudden urge to order a some surge suppressors... From: Af [af-boun...@afmug.com] on behalf of Chuck McCown via Af [af@afmug.com] Sent: Wednesday, December 03, 2014 9:57 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need surge suppressors ... From: Gino Villarini via Af Sent: Wednesday, December 03, 2014 8:54 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO Why? Let the girls be girls and have all the shoes they want… as long as you can have how many x you what In my case, I have a wall of lego star wars.. 5 drones, 5 cars … so you get the point Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr From: af@afmug.com af@afmug.com Reply-To: af@afmug.com af@afmug.com Date: Wednesday, December 3, 2014 at 11:49 AM To: af@afmug.com af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO Oh wow. That commercial is depressing. -Ty On Wed, Dec 3, 2014 at 9:47 AM, Chuck McCown via Af af@afmug.com wrote: (the periwinkle reference) http://www.ispot.tv/ad/7rk6/justfab-com-buy-1-get-1-free-they-arent-just-shoes -Original Message- From: Chuck McCown via Af Sent: Wednesday, December 03, 2014 8:43 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need periwinkle... -Original Message- From: Seth Mattinen via Af Sent: Wednesday, December 03, 2014 8:41 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO On 12/3/14, 7:39 AM, Mike Hammett via Af wrote: Have someone from Ubiquiti on to explain why in God's name they thought a cloud platform is what people wanted. CLOUD: because you will want it. ~Seth
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
maybe get a UBNT rep and a Cambium rep to do a debate, I will stir the pot... I mean moderate it for you On Wed, Dec 3, 2014 at 10:08 AM, Chuck McCown via Af af@afmug.com wrote: But... You NEED surge suppressors... *From:* Ty Featherling via Af af@afmug.com *Sent:* Wednesday, December 03, 2014 9:04 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You're right I'm sure. After Black Friday this year I am a little put off by blind consumerism. The plain idea of I need more things is off-putting to me. It'll pass. -Ty On Wed, Dec 3, 2014 at 9:54 AM, Gino Villarini via Af af@afmug.com wrote: Why? Let the girls be girls and have all the shoes they want… as long as you can have how many x you what In my case, I have a wall of lego star wars.. 5 drones, 5 cars … so you get the point Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr From: af@afmug.com af@afmug.com Reply-To: af@afmug.com af@afmug.com Date: Wednesday, December 3, 2014 at 11:49 AM To: af@afmug.com af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO Oh wow. That commercial is depressing. -Ty On Wed, Dec 3, 2014 at 9:47 AM, Chuck McCown via Af af@afmug.com wrote: (the periwinkle reference) http://www.ispot.tv/ad/7rk6/justfab-com-buy-1-get-1-free- they-arent-just-shoes -Original Message- From: Chuck McCown via Af Sent: Wednesday, December 03, 2014 8:43 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need periwinkle... -Original Message- From: Seth Mattinen via Af Sent: Wednesday, December 03, 2014 8:41 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO On 12/3/14, 7:39 AM, Mike Hammett via Af wrote: Have someone from Ubiquiti on to explain why in God's name they thought a cloud platform is what people wanted. CLOUD: because you will want it. ~Seth -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
Re: [AFMUG] Cold weather gloves
Hunting mittens with the flip up finger covers are nice, you can keep your finger tips warm until you need to do fine work On Wed, Dec 3, 2014 at 10:17 AM, Josh Luthman via Af af@afmug.com wrote: Jay, We use Mechanix gloves at 20-40 degrees. Have been for the last couple of weeks. I wear a large. http://www.amazon.com/Mechanix-Wear-MG-05-010-Original-Glove/dp/B0001VNZQY I've found that these give you the most dexterity out of all other gloves. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Dec 2, 2014 at 10:20 PM, Jaime Solorza via Af af@afmug.com wrote: Tundra line by Ironclad gloves Jaime Solorza On Dec 2, 2014 8:12 PM, Jay Weekley via Af af@afmug.com wrote: Now that we're approaching Winter in the great white North Alabama and Christmas is near I need some good cold weather gloves. Normally, the coldest we work in is the 20's (Fahrenheit) and I really would like to find something that allows me to work with small tools with reasonable dexterity but keep my hands warm. Any suggestions? Am I being unrealistic? -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
Re: [AFMUG] Cold weather gloves
I have used Ironclad for years. For climbing I use the Box Handlers Jaime Solorza On Dec 2, 2014 8:12 PM, Jay Weekley via Af af@afmug.com wrote: Now that we're approaching Winter in the great white North Alabama and Christmas is near I need some good cold weather gloves. Normally, the coldest we work in is the 20's (Fahrenheit) and I really would like to find something that allows me to work with small tools with reasonable dexterity but keep my hands warm. Any suggestions? Am I being unrealistic?
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
I don’t have periwinkle surge suppressors……. I NEED periwinkle surge suppressors! From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown via Af Sent: Wednesday, December 03, 2014 10:19 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO And shoes From: Mathew Howard via Afmailto:af@afmug.com Sent: Wednesday, December 03, 2014 9:16 AM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO For some reason I have a sudden urge to order a some surge suppressors... From: Af [af-boun...@afmug.com] on behalf of Chuck McCown via Af [af@afmug.com] Sent: Wednesday, December 03, 2014 9:57 AM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need surge suppressors ... From: Gino Villarini via Afmailto:af@afmug.com Sent: Wednesday, December 03, 2014 8:54 AM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO Why? Let the girls be girls and have all the shoes they want… as long as you can have how many x you what In my case, I have a wall of lego star wars.. 5 drones, 5 cars … so you get the point Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.comhttp://www.aeronetpr.com @aeronetpr From: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Reply-To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Date: Wednesday, December 3, 2014 at 11:49 AM To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO Oh wow. That commercial is depressing. -Ty On Wed, Dec 3, 2014 at 9:47 AM, Chuck McCown via Af af@afmug.commailto:af@afmug.com wrote: (the periwinkle reference) http://www.ispot.tv/ad/7rk6/justfab-com-buy-1-get-1-free-they-arent-just-shoes -Original Message- From: Chuck McCown via Af Sent: Wednesday, December 03, 2014 8:43 AM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need periwinkle... -Original Message- From: Seth Mattinen via Af Sent: Wednesday, December 03, 2014 8:41 AM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO On 12/3/14, 7:39 AM, Mike Hammett via Af wrote: Have someone from Ubiquiti on to explain why in God's name they thought a cloud platform is what people wanted. CLOUD: because you will want it. ~Seth Total Control Panel Loginhttps://asp.reflexion.net/login?domain=litewire.net To: ja...@litewire.nethttps://asp.reflexion.net/address-properties?aID=242260993domain=litewire.net From: 014a10f24254-0f010608-a376-484d-9e1e-2f73325c8419-000...@amazonses.comhttps://asp.reflexion.net/address-properties?aID=2884677765domain=litewire.net Removehttps://asp.reflexion.net/FooterAction?ver=2un-wl-sender-domain=1rID=242260993aID=2884677765domain=litewire.net amazonses.com from my allow list You received this message because the domain amazonses.com is on your allow list.
[AFMUG] 13.3 Open Beta
AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta * PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) * 7MHz Channel Bandwidth for 3.5 and 3.65 radios * Removal of the PTP450 Map for faster link speeds * SNMPv3 * HTTPS * Ability to turn off Telnet, FTP and TFTP * Read-Only Accounts for Admin, Install, and Tech * Sector SA * Export of Sessions Status Page * Config File export/Import for AP/BHM and SM/BHS NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, Cambium Jonathan
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
I dont think I can utter periwinkle and keep my Steve McQueen Bruce Lee The Fonz coolness or my Chicano Macho Man badge. I thought it was a color or sissy drink Jaime Solorza On Dec 3, 2014 9:46 AM, Chuck McCown via Af af@afmug.com wrote: done *From:* James Howard via Af af@afmug.com *Sent:* Wednesday, December 03, 2014 9:43 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO I don’t have periwinkle surge suppressors……. I NEED periwinkle surge suppressors! *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Chuck McCown via Af *Sent:* Wednesday, December 03, 2014 10:19 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO And shoes *From:* Mathew Howard via Af af@afmug.com *Sent:* Wednesday, December 03, 2014 9:16 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO For some reason I have a sudden urge to order a some surge suppressors... -- *From:* Af [af-boun...@afmug.com] on behalf of Chuck McCown via Af [ af@afmug.com] *Sent:* Wednesday, December 03, 2014 9:57 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need surge suppressors ... *From:* Gino Villarini via Af af@afmug.com *Sent:* Wednesday, December 03, 2014 8:54 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO Why? Let the girls be girls and have all the shoes they want… as long as you can have how many x you what In my case, I have a wall of lego star wars.. 5 drones, 5 cars … so you get the point Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr *From: *af@afmug.com af@afmug.com *Reply-To: *af@afmug.com af@afmug.com *Date: *Wednesday, December 3, 2014 at 11:49 AM *To: *af@afmug.com af@afmug.com *Subject: *Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO Oh wow. That commercial is depressing. -Ty On Wed, Dec 3, 2014 at 9:47 AM, Chuck McCown via Af af@afmug.com wrote: (the periwinkle reference) http://www.ispot.tv/ad/7rk6/justfab-com-buy-1-get-1-free-they-arent-just-shoes -Original Message- From: Chuck McCown via Af Sent: Wednesday, December 03, 2014 8:43 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need periwinkle... -Original Message- From: Seth Mattinen via Af Sent: Wednesday, December 03, 2014 8:41 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO On 12/3/14, 7:39 AM, Mike Hammett via Af wrote: Have someone from Ubiquiti on to explain why in God's name they thought a cloud platform is what people wanted. CLOUD: because you will want it. ~Seth -- *Total Control Panel* Login https://asp.reflexion.net/login?domain=litewire.net To: ja...@litewire.net https://asp.reflexion.net/address-properties?aID=242260993domain=litewire.net From: 014a10f24254-0f010608-a376-484d-9e1e-2f73325c8419-000...@amazonses.com https://asp.reflexion.net/address-properties?aID=2884677765domain=litewire.net Remove https://asp.reflexion.net/FooterAction?ver=2un-wl-sender-domain=1rID=242260993aID=2884677765domain=litewire.net amazonses.com from my allow list *You received this message because the domain amazonses.com http://amazonses.com is on your allow list.*
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
almost as bad as puce. Can we get some puce surge suppressors? -- bp part {dash} 15 {at} SkylineBroadbandService {dot} com On 12/3/2014 8:50 AM, Jaime Solorza via Af wrote: I dont think I can utter periwinkle and keep my Steve McQueen Bruce Lee The Fonz coolness or my Chicano Macho Man badge. I thought it was a color or sissy drink Jaime Solorza On Dec 3, 2014 9:46 AM, Chuck McCown via Af af@afmug.com mailto:af@afmug.com wrote: done *From:* James Howard via Af mailto:af@afmug.com *Sent:* Wednesday, December 03, 2014 9:43 AM *To:* af@afmug.com mailto:af@afmug.com *Subject:* Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO I don’t have periwinkle surge suppressors……. I NEED periwinkle surge suppressors! *From:*Af [mailto:af-boun...@afmug.com mailto:af-boun...@afmug.com] *On Behalf Of *Chuck McCown via Af *Sent:* Wednesday, December 03, 2014 10:19 AM *To:* af@afmug.com mailto:af@afmug.com *Subject:* Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO And shoes *From:*Mathew Howard via Af mailto:af@afmug.com *Sent:*Wednesday, December 03, 2014 9:16 AM *To:*af@afmug.com mailto:af@afmug.com *Subject:*Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO For some reason I have a sudden urge to order a some surge suppressors... *From:*Af [af-boun...@afmug.com mailto:af-boun...@afmug.com] on behalf of Chuck McCown via Af [af@afmug.com mailto:af@afmug.com] *Sent:* Wednesday, December 03, 2014 9:57 AM *To:* af@afmug.com mailto:af@afmug.com *Subject:* Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need surge suppressors ... *From:*Gino Villarini via Af mailto:af@afmug.com *Sent:*Wednesday, December 03, 2014 8:54 AM *To:*af@afmug.com mailto:af@afmug.com *Subject:*Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO Why? Let the girls be girls and have all the shoes they want… as long as you can have how many x you what In my case, I have a wall of lego star wars.. 5 drones, 5 cars … so you get the point Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com http://www.aeronetpr.com @aeronetpr *From: *af@afmug.com mailto:af@afmug.com af@afmug.com mailto:af@afmug.com *Reply-To: *af@afmug.com mailto:af@afmug.com af@afmug.com mailto:af@afmug.com *Date: *Wednesday, December 3, 2014 at 11:49 AM *To: *af@afmug.com mailto:af@afmug.com af@afmug.com mailto:af@afmug.com *Subject: *Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO Oh wow. That commercial is depressing. -Ty On Wed, Dec 3, 2014 at 9:47 AM, Chuck McCown via Af af@afmug.com mailto:af@afmug.com wrote: (the periwinkle reference) http://www.ispot.tv/ad/7rk6/justfab-com-buy-1-get-1-free-they-arent-just-shoes -Original Message- From: Chuck McCown via Af Sent: Wednesday, December 03, 2014 8:43 AM To: af@afmug.com mailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need periwinkle... -Original Message- From: Seth Mattinen via Af Sent: Wednesday, December 03, 2014 8:41 AM To: af@afmug.com mailto:af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO On 12/3/14, 7:39 AM, Mike Hammett via Af wrote: Have someone from Ubiquiti on to explain why in God's name they thought a cloud platform is what people wanted. CLOUD: because you will want it. ~Seth *Total Control Panel* Login https://asp.reflexion.net/login?domain=litewire.net To: ja...@litewire.net https://asp.reflexion.net/address-properties?aID=242260993domain=litewire.net From: 014a10f24254-0f010608-a376-484d-9e1e-2f73325c8419-000...@amazonses.com https://asp.reflexion.net/address-properties?aID=2884677765domain=litewire.net Remove https://asp.reflexion.net/FooterAction?ver=2un-wl-sender-domain=1rID=242260993aID=2884677765domain=litewire.net amazonses.com http://amazonses.com from my allow list /You received this message because the domain amazonses.com http://amazonses.com is on your allow list./
Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO
Only if they make a puce shoe commercial. From: Bill Prince via Af Sent: Wednesday, December 03, 2014 9:58 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO almost as bad as puce. Can we get some puce surge suppressors? -- bp part {dash} 15 {at} SkylineBroadbandService {dot} com On 12/3/2014 8:50 AM, Jaime Solorza via Af wrote: I dont think I can utter periwinkle and keep my Steve McQueen Bruce Lee The Fonz coolness or my Chicano Macho Man badge. I thought it was a color or sissy drink Jaime Solorza On Dec 3, 2014 9:46 AM, Chuck McCown via Af af@afmug.com wrote: done From: James Howard via Af Sent: Wednesday, December 03, 2014 9:43 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO I don’t have periwinkle surge suppressors……. I NEED periwinkle surge suppressors! From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown via Af Sent: Wednesday, December 03, 2014 10:19 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO And shoes From: Mathew Howard via Af Sent: Wednesday, December 03, 2014 9:16 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO For some reason I have a sudden urge to order a some surge suppressors... From: Af [af-boun...@afmug.com] on behalf of Chuck McCown via Af [af@afmug.com] Sent: Wednesday, December 03, 2014 9:57 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need surge suppressors ... From: Gino Villarini via Af Sent: Wednesday, December 03, 2014 8:54 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO Why? Let the girls be girls and have all the shoes they want… as long as you can have how many x you what In my case, I have a wall of lego star wars.. 5 drones, 5 cars … so you get the point Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr From: af@afmug.com af@afmug.com Reply-To: af@afmug.com af@afmug.com Date: Wednesday, December 3, 2014 at 11:49 AM To: af@afmug.com af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO Oh wow. That commercial is depressing. -Ty On Wed, Dec 3, 2014 at 9:47 AM, Chuck McCown via Af af@afmug.com wrote: (the periwinkle reference) http://www.ispot.tv/ad/7rk6/justfab-com-buy-1-get-1-free-they-arent-just-shoes -Original Message- From: Chuck McCown via Af Sent: Wednesday, December 03, 2014 8:43 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO You need periwinkle... -Original Message- From: Seth Mattinen via Af Sent: Wednesday, December 03, 2014 8:41 AM To: af@afmug.com Subject: Re: [AFMUG] OPEN SLOT TODAY on ISPRADIO On 12/3/14, 7:39 AM, Mike Hammett via Af wrote: Have someone from Ubiquiti on to explain why in God's name they thought a cloud platform is what people wanted. CLOUD: because you will want it. ~Seth Total Control Panel Login To: ja...@litewire.net From: 014a10f24254-0f010608-a376-484d-9e1e-2f73325c8419-000...@amazonses.com Remove amazonses.com from my allow list You received this message because the domain amazonses.com is on your allow list.
Re: [AFMUG] 13.3 Open Beta
What is Sector SA? And removal of PT450 MAP? Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr From: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Reply-To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Date: Wednesday, December 3, 2014 at 12:44 PM To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Subject: [AFMUG] 13.3 Open Beta AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta * PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) * 7MHz Channel Bandwidth for 3.5 and 3.65 radios * Removal of the PTP450 Map for faster link speeds * SNMPv3 * HTTPS * Ability to turn off Telnet, FTP and TFTP * Read-Only Accounts for Admin, Install, and Tech * Sector SA * Export of Sessions Status Page * Config File export/Import for AP/BHM and SM/BHS NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, Cambium Jonathan
Re: [AFMUG] 13.3 Open Beta
- Read-Only Accounts for Admin, Install, and Tech ABOUT TIME! We needed this 10 years ago. Any chance of getting this implemented on the Canopy FSK platform? On Wed, Dec 3, 2014 at 10:44 AM, Jonathan Mandziara via Af af@afmug.com wrote: AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta - PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) - 7MHz Channel Bandwidth for 3.5 and 3.65 radios - Removal of the PTP450 Map for faster link speeds - SNMPv3 - HTTPS - Ability to turn off Telnet, FTP and TFTP - Read-Only Accounts for Admin, Install, and Tech - Sector SA - Export of Sessions Status Page - Config File export/Import for AP/BHM and SM/BHS *NOTE:* PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, C*a*mbium Jonathan
Re: [AFMUG] 13.3 Open Beta
Is the PTP230 constant reboot issue fixed? Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) Will this work with Purwave wimax? How much throughput do we gain? 7MHz Channel Bandwidth for 3.5 and 3.65 radios Removal of the PTP450 Map for faster link speeds How much faster? SNMPv3 HTTPS Ability to turn off Telnet, FTP and TFTP Read-Only Accounts for Admin, Install, and Tech Sector SA This is really cool reading release notes. Wish we had it on FSK as well. Export of Sessions Status Page Config File export/Import for AP/BHM and SM/BHS NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta
Re: [AFMUG] 13.3 Open Beta
Matt, Another great question. At this time, 13.2 is for PMP450 and PTP450 Only. The fix for PTP230 is coming soon. Best, Jonathan -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af Sent: Wednesday, December 03, 2014 11:27 AM To: af@afmug.com Subject: Re: [AFMUG] 13.3 Open Beta Is the PTP230 constant reboot issue fixed? Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) Will this work with Purwave wimax? How much throughput do we gain? 7MHz Channel Bandwidth for 3.5 and 3.65 radios Removal of the PTP450 Map for faster link speeds How much faster? SNMPv3 HTTPS Ability to turn off Telnet, FTP and TFTP Read-Only Accounts for Admin, Install, and Tech Sector SA This is really cool reading release notes. Wish we had it on FSK as well. Export of Sessions Status Page Config File export/Import for AP/BHM and SM/BHS NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta
Re: [AFMUG] 13.3 Open Beta
When running Sector Spectrum Analyzer (SA), once the sector is done, you'll be able to go through the scan results for the AP as well as all of the SMs (via the Remote SA page). For the PTP Map removal, Jonathan is correct in the throughput improvement. But be aware that you MUST upgrade the far end first as it is an incompatibility in the air interface. Regards, -Aaron From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jonathan Mandziara via Af Sent: Wednesday, December 03, 2014 11:24 AM To: af@afmug.com Subject: Re: [AFMUG] 13.3 Open Beta Gino, Great questions! Sector SA is a feature that runs a SA on the AP and all the SMs registered to it at the same time to get a true picture of the RF environment the AP and the SMs are seeing without the influence of the APs energy. The removal of the MAP in the PTP450 will give around an increase of 3.2 Mbps on each Channel Bandwidth. Best, Cambium Jonathan From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini via Af Sent: Wednesday, December 03, 2014 11:20 AM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] 13.3 Open Beta What is Sector SA? And removal of PT450 MAP? Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.comhttp://www.aeronetpr.com @aeronetpr From: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Reply-To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Date: Wednesday, December 3, 2014 at 12:44 PM To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Subject: [AFMUG] 13.3 Open Beta AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta ?PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) ?7MHz Channel Bandwidth for 3.5 and 3.65 radios ?Removal of the PTP450 Map for faster link speeds ?SNMPv3 ?HTTPS ?Ability to turn off Telnet, FTP and TFTP ?Read-Only Accounts for Admin, Install, and Tech ?Sector SA ?Export of Sessions Status Page ?Config File export/Import for AP/BHM and SM/BHS NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, Cambium Jonathan
Re: [AFMUG] 13.3 Open Beta
Eric – We are looking at our options for bringing another release to FSK but I can’t comment on that just yet. -Aaron From: Af [mailto:af-boun...@afmug.com] On Behalf Of Eric Muehleisen via Af Sent: Wednesday, December 03, 2014 11:25 AM To: af@afmug.com Subject: Re: [AFMUG] 13.3 Open Beta * Read-Only Accounts for Admin, Install, and Tech ABOUT TIME! We needed this 10 years ago. Any chance of getting this implemented on the Canopy FSK platform? On Wed, Dec 3, 2014 at 10:44 AM, Jonathan Mandziara via Af af@afmug.commailto:af@afmug.com wrote: AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta * PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) * 7MHz Channel Bandwidth for 3.5 and 3.65 radios * Removal of the PTP450 Map for faster link speeds * SNMPv3 * HTTPS * Ability to turn off Telnet, FTP and TFTP * Read-Only Accounts for Admin, Install, and Tech * Sector SA * Export of Sessions Status Page * Config File export/Import for AP/BHM and SM/BHS NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, Cambium Jonathan
Re: [AFMUG] 13.3 Open Beta
13.3 is for PMP450 and PTP450 only. ;) That being said, we are close to having a 13.2.1 ready that fixes the issues reported with 13.2 including the PTP230 reboot issue. We have found that the problem is VLAN related and only affects PTP230. Regards, -Aaron -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jonathan Mandziara via Af Sent: Wednesday, December 03, 2014 11:28 AM To: af@afmug.com Subject: Re: [AFMUG] 13.3 Open Beta Matt, Another great question. At this time, 13.2 is for PMP450 and PTP450 Only. The fix for PTP230 is coming soon. Best, Jonathan -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af Sent: Wednesday, December 03, 2014 11:27 AM To: af@afmug.com Subject: Re: [AFMUG] 13.3 Open Beta Is the PTP230 constant reboot issue fixed? Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) Will this work with Purwave wimax? How much throughput do we gain? 7MHz Channel Bandwidth for 3.5 and 3.65 radios Removal of the PTP450 Map for faster link speeds How much faster? SNMPv3 HTTPS Ability to turn off Telnet, FTP and TFTP Read-Only Accounts for Admin, Install, and Tech Sector SA This is really cool reading release notes. Wish we had it on FSK as well. Export of Sessions Status Page Config File export/Import for AP/BHM and SM/BHS NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta
Re: [AFMUG] 13.3 Open Beta
Woaw! Nice…. Is the Sector SA runs on the SMS at the same time or 1 by 1? Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr From: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Reply-To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Date: Wednesday, December 3, 2014 at 1:24 PM To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] 13.3 Open Beta Gino, Great questions! Sector SA is a feature that runs a SA on the AP and all the SMs registered to it at the same time to get a true picture of the RF environment the AP and the SMs are seeing without the influence of the APs energy. The removal of the MAP in the PTP450 will give around an increase of 3.2 Mbps on each Channel Bandwidth. Best, Cambium Jonathan From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini via Af Sent: Wednesday, December 03, 2014 11:20 AM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] 13.3 Open Beta What is Sector SA? And removal of PT450 MAP? Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.comhttp://www.aeronetpr.com @aeronetpr From: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Reply-To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Date: Wednesday, December 3, 2014 at 12:44 PM To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Subject: [AFMUG] 13.3 Open Beta AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta ? PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) ? 7MHz Channel Bandwidth for 3.5 and 3.65 radios ? Removal of the PTP450 Map for faster link speeds ? SNMPv3 ? HTTPS ? Ability to turn off Telnet, FTP and TFTP ? Read-Only Accounts for Admin, Install, and Tech ? Sector SA ? Export of Sessions Status Page ? Config File export/Import for AP/BHM and SM/BHS NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, Cambium Jonathan
Re: [AFMUG] 13.3 Open Beta
I really hope you guys will consider testing and releasing this for FSK. We still use a lot of it. The config file will definitely be helpful. And there's still no resolution for 2.4 FSK None frequency issue. On 12/3/2014 10:44 AM, Jonathan Mandziara via Af wrote: AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta * PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) * 7MHz Channel Bandwidth for 3.5 and 3.65 radios * Removal of the PTP450 Map for faster link speeds * SNMPv3 * HTTPS * Ability to turn off Telnet, FTP and TFTP * Read-Only Accounts for Admin, Install, and Tech * Sector SA * Export of Sessions Status Page * Config File export/Import for AP/BHM and SM/BHS *NOTE:* PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, C*a*mbium Jonathan
Re: [AFMUG] 13.3 Open Beta
Gino, The SMs will run at around the same time and the AP will run a bit longer to ensure that all of the SMs have time to finish their scans. Best, Jonathan From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini via Af Sent: Wednesday, December 03, 2014 11:37 AM To: af@afmug.com Subject: Re: [AFMUG] 13.3 Open Beta Woaw! Nice Is the Sector SA runs on the SMS at the same time or 1 by 1? Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.comhttp://www.aeronetpr.com @aeronetpr From: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Reply-To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Date: Wednesday, December 3, 2014 at 1:24 PM To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] 13.3 Open Beta Gino, Great questions! Sector SA is a feature that runs a SA on the AP and all the SMs registered to it at the same time to get a true picture of the RF environment the AP and the SMs are seeing without the influence of the APs energy. The removal of the MAP in the PTP450 will give around an increase of 3.2 Mbps on each Channel Bandwidth. Best, Cambium Jonathan From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini via Af Sent: Wednesday, December 03, 2014 11:20 AM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] 13.3 Open Beta What is Sector SA? And removal of PT450 MAP? Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.comhttp://www.aeronetpr.com @aeronetpr From: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Reply-To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Date: Wednesday, December 3, 2014 at 12:44 PM To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Subject: [AFMUG] 13.3 Open Beta AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta ? PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) ? 7MHz Channel Bandwidth for 3.5 and 3.65 radios ? Removal of the PTP450 Map for faster link speeds ? SNMPv3 ? HTTPS ? Ability to turn off Telnet, FTP and TFTP ? Read-Only Accounts for Admin, Install, and Tech ? Sector SA ? Export of Sessions Status Page ? Config File export/Import for AP/BHM and SM/BHS NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, Cambium Jonathan
Re: [AFMUG] 13.3 Open Beta
They are all told to run it simultaneously and while the SMs are doing it, the AP shuts itself up and runs a scan during that time. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini via Af Sent: Wednesday, December 03, 2014 11:37 AM To: af@afmug.com Subject: Re: [AFMUG] 13.3 Open Beta Woaw! Nice Is the Sector SA runs on the SMS at the same time or 1 by 1? Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.comhttp://www.aeronetpr.com @aeronetpr From: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Reply-To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Date: Wednesday, December 3, 2014 at 1:24 PM To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] 13.3 Open Beta Gino, Great questions! Sector SA is a feature that runs a SA on the AP and all the SMs registered to it at the same time to get a true picture of the RF environment the AP and the SMs are seeing without the influence of the APs energy. The removal of the MAP in the PTP450 will give around an increase of 3.2 Mbps on each Channel Bandwidth. Best, Cambium Jonathan From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini via Af Sent: Wednesday, December 03, 2014 11:20 AM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] 13.3 Open Beta What is Sector SA? And removal of PT450 MAP? Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.comhttp://www.aeronetpr.com @aeronetpr From: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Reply-To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Date: Wednesday, December 3, 2014 at 12:44 PM To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Subject: [AFMUG] 13.3 Open Beta AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta ?PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) ?7MHz Channel Bandwidth for 3.5 and 3.65 radios ?Removal of the PTP450 Map for faster link speeds ?SNMPv3 ?HTTPS ?Ability to turn off Telnet, FTP and TFTP ?Read-Only Accounts for Admin, Install, and Tech ?Sector SA ?Export of Sessions Status Page ?Config File export/Import for AP/BHM and SM/BHS NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, Cambium Jonathan
Re: [AFMUG] 13.3 Open Beta
It is definitely being considered and your voices are being heard. I just can’t comment on it just yet. :) From: Af [mailto:af-boun...@afmug.com] On Behalf Of George Skorup (Cyber Broadcasting) via Af Sent: Wednesday, December 03, 2014 11:39 AM To: af@afmug.com Subject: Re: [AFMUG] 13.3 Open Beta I really hope you guys will consider testing and releasing this for FSK. We still use a lot of it. The config file will definitely be helpful. And there's still no resolution for 2.4 FSK None frequency issue. On 12/3/2014 10:44 AM, Jonathan Mandziara via Af wrote: AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta * PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) * 7MHz Channel Bandwidth for 3.5 and 3.65 radios * Removal of the PTP450 Map for faster link speeds * SNMPv3 * HTTPS * Ability to turn off Telnet, FTP and TFTP * Read-Only Accounts for Admin, Install, and Tech * Sector SA * Export of Sessions Status Page * Config File export/Import for AP/BHM and SM/BHS NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, Cambium Jonathan
Re: [AFMUG] 13.3 Open Beta
I'd like to know as well. --danp On 12/03/2014 10:26 AM, Matt via Af wrote: Will this work with Purwave wimax?
Re: [AFMUG] 13.3 Open Beta
Config file! Not already!!! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 3, 2014 12:41 PM, Aaron Schneider via Af af@afmug.com wrote: It is definitely being considered and your voices are being heard. I just can’t comment on it just yet. :) *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *George Skorup (Cyber Broadcasting) via Af *Sent:* Wednesday, December 03, 2014 11:39 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] 13.3 Open Beta I really hope you guys will consider testing and releasing this for FSK. We still use a lot of it. The config file will definitely be helpful. And there's still no resolution for 2.4 FSK None frequency issue. On 12/3/2014 10:44 AM, Jonathan Mandziara via Af wrote: AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta - PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) - 7MHz Channel Bandwidth for 3.5 and 3.65 radios - Removal of the PTP450 Map for faster link speeds - SNMPv3 - HTTPS - Ability to turn off Telnet, FTP and TFTP - Read-Only Accounts for Admin, Install, and Tech - Sector SA - Export of Sessions Status Page - Config File export/Import for AP/BHM and SM/BHS *NOTE:* PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, C*a*mbium Jonathan
Re: [AFMUG] 13.3 Open Beta
That is freakin awesome! Now where's my AP background spectrum analyzer? :) On 12/3/2014 11:40 AM, Aaron Schneider via Af wrote: They are all told to run it simultaneously and while the SMs are doing it, the AP shuts itself up and runs a scan during that time. *From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Gino Villarini via Af *Sent:* Wednesday, December 03, 2014 11:37 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] 13.3 Open Beta Woaw! Nice�. Is the Sector SA runs on the SMS at the same time or 1 by 1? Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com http://www.aeronetpr.com @aeronetpr *From: *af@afmug.com mailto:af@afmug.com af@afmug.com mailto:af@afmug.com *Reply-To: *af@afmug.com mailto:af@afmug.com af@afmug.com mailto:af@afmug.com *Date: *Wednesday, December 3, 2014 at 1:24 PM *To: *af@afmug.com mailto:af@afmug.com af@afmug.com mailto:af@afmug.com *Subject: *Re: [AFMUG] 13.3 Open Beta Gino, Great questions! Sector SA is a feature that runs a SA on the AP and all the SMs registered to it at the same time to get a true picture of the RF environment the AP and the SMs are seeing without the influence of the APs energy. The removal of the MAP in the PTP450 will give around an increase of 3.2 Mbps on each Channel Bandwidth. Best, Cambium Jonathan *From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Gino Villarini via Af *Sent:* Wednesday, December 03, 2014 11:20 AM *To:* af@afmug.com mailto:af@afmug.com *Subject:* Re: [AFMUG] 13.3 Open Beta What is Sector SA? And removal of PT450 MAP? Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com http://www.aeronetpr.com @aeronetpr *From: *af@afmug.com mailto:af@afmug.com af@afmug.com mailto:af@afmug.com *Reply-To: *af@afmug.com mailto:af@afmug.com af@afmug.com mailto:af@afmug.com *Date: *Wednesday, December 3, 2014 at 12:44 PM *To: *af@afmug.com mailto:af@afmug.com af@afmug.com mailto:af@afmug.com *Subject: *[AFMUG] 13.3 Open Beta AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta ?PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) ?7MHz Channel Bandwidth for 3.5 and 3.65 radios ?Removal of the PTP450 Map for faster link speeds ?SNMPv3 ?HTTPS ?Ability to turn off Telnet, FTP and TFTP ?Read-Only Accounts for Admin, Install, and Tech ?Sector SA ?Export of Sessions Status Page ?Config File export/Import for AP/BHM and SM/BHS *NOTE:* PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, C*a*mbium Jonathan
Re: [AFMUG] 13.3 Open Beta
Better way late than never, right? :) From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Luthman via Af Sent: Wednesday, December 03, 2014 11:43 AM To: af@afmug.com Subject: Re: [AFMUG] 13.3 Open Beta Config file! Not already!!! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 3, 2014 12:41 PM, Aaron Schneider via Af af@afmug.commailto:af@afmug.com wrote: It is definitely being considered and your voices are being heard. I just can’t comment on it just yet. :) From: Af [mailto:af-boun...@afmug.commailto:af-boun...@afmug.com] On Behalf Of George Skorup (Cyber Broadcasting) via Af Sent: Wednesday, December 03, 2014 11:39 AM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] 13.3 Open Beta I really hope you guys will consider testing and releasing this for FSK. We still use a lot of it. The config file will definitely be helpful. And there's still no resolution for 2.4 FSK None frequency issue. On 12/3/2014 10:44 AM, Jonathan Mandziara via Af wrote: AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta * PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) * 7MHz Channel Bandwidth for 3.5 and 3.65 radios * Removal of the PTP450 Map for faster link speeds * SNMPv3 * HTTPS * Ability to turn off Telnet, FTP and TFTP * Read-Only Accounts for Admin, Install, and Tech * Sector SA * Export of Sessions Status Page * Config File export/Import for AP/BHM and SM/BHS NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, Cambium Jonathan
Re: [AFMUG] 13.3 Open Beta
Matt, Sorry, I did not realize that there were other questions in the thread. Q) Will this work with Purwave wimax? A) All of the 5ms frame testing and verification work that we have been testing against is the 3.5 and 3.65 PMP320 units. Can you give it a try with Purwave Wimax and let us know? Q) How much t-put will we gain? I do not understand the context of this question. How much more T-put is gained going from a 2.5ms frame to a 5ms frame? Q) How much faster? A) 3.2 Mbps (in each BW)- Be sure to upgrade the far side of the link first S) This is really cool reading release notes. Wish we had it on FSK as well. A) We hear you. We can't comment on FSK support at this time. -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of tcidan via Af Sent: Wednesday, December 03, 2014 11:43 AM To: af@afmug.com Subject: Re: [AFMUG] 13.3 Open Beta I'd like to know as well. --danp On 12/03/2014 10:26 AM, Matt via Af wrote: Will this work with Purwave wimax?
Re: [AFMUG] 13.3 Open Beta
+1 with major enthusiasm! I can't even remember when we first asked for the config file import/export. It's got to be close to 6 years now. Man oh man. We're finally almost there! and SNMPv3 too. Wowser. -- bp part {dash} 15 {at} SkylineBroadbandService {dot} com On 12/3/2014 9:38 AM, George Skorup (Cyber Broadcasting) via Af wrote: I really hope you guys will consider testing and releasing this for FSK. We still use a lot of it. The config file will definitely be helpful. And there's still no resolution for 2.4 FSK None frequency issue. On 12/3/2014 10:44 AM, Jonathan Mandziara via Af wrote: AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta * PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) * 7MHz Channel Bandwidth for 3.5 and 3.65 radios * Removal of the PTP450 Map for faster link speeds * SNMPv3 * HTTPS * Ability to turn off Telnet, FTP and TFTP * Read-Only Accounts for Admin, Install, and Tech * Sector SA * Export of Sessions Status Page * Config File export/Import for AP/BHM and SM/BHS *NOTE:* PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, C*a*mbium Jonathan
Re: [AFMUG] 13.3 Open Beta
We are looking specifically for beta coverage on PMP320 co-location. If anyone is trying this or have specific questions, please let us know. You can also contact me off-list at rajesh.vijayaku...@cambiumnetworks.com. Rajesh Vijayakumar Cambium Networks On Wed, Dec 3, 2014 at 10:44 AM, Jonathan Mandziara via Af af@afmug.com wrote: AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta - PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) - 7MHz Channel Bandwidth for 3.5 and 3.65 radios - Removal of the PTP450 Map for faster link speeds - SNMPv3 - HTTPS - Ability to turn off Telnet, FTP and TFTP - Read-Only Accounts for Admin, Install, and Tech - Sector SA - Export of Sessions Status Page - Config File export/Import for AP/BHM and SM/BHS *NOTE:* PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, C*a*mbium Jonathan
Re: [AFMUG] 13.3 Open Beta
Sorry, I did not realize that there were other questions in the thread. Q) Will this work with Purwave wimax? A) All of the 5ms frame testing and verification work that we have been testing against is the 3.5 and 3.65 PMP320 units. Can you give it a try with Purwave Wimax and let us know? I do not have any purwave but there is some of it around here. Will see if we get less interference going 5ms frame. Think I might wait a bit to let others go first though. Q) How much t-put will we gain? I do not understand the context of this question. How much more T-put is gained going from a 2.5ms frame to a 5ms frame? In release notes I think it states that 5ms frame should have less overhead so more throughput along with double latency. Q) How much faster? A) 3.2 Mbps (in each BW)- Be sure to upgrade the far side of the link first I still wish there was a max range setting on the PTP450 units. We seem to run into issues when PTP230 units boot up without there range setting determined yet. They clash with others that are linked already due to data slots misaligned is what I figure. S) This is really cool reading release notes. Wish we had it on FSK as well. A) We hear you. We can't comment on FSK support at this time. I really like this SA feature I'd like to know as well. --danp On 12/03/2014 10:26 AM, Matt via Af wrote: Will this work with Purwave wimax?
Re: [AFMUG] 13.3 Open Beta
I’m going to try this out as soon as I can get a 450AP 3.65 on the site. Question - the comment about CMM timing source. Was this ‘it works best if all devices have the same timing source’ or is there something specific to the CMM itself?Is ask because we usually use LMG CTM’s at these sites. The timing all comes from the same timing source, but it’s not your CMM. Mark On Dec 3, 2014, at 1:13 PM, Rajesh Vijayakumar via Af af@afmug.com wrote: We are looking specifically for beta coverage on PMP320 co-location. If anyone is trying this or have specific questions, please let us know. You can also contact me off-list at rajesh.vijayaku...@cambiumnetworks.com mailto:rajesh.vijayaku...@cambiumnetworks.com. Rajesh Vijayakumar Cambium Networks On Wed, Dec 3, 2014 at 10:44 AM, Jonathan Mandziara via Af af@afmug.com mailto:af@afmug.com wrote: AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta https://support.cambiumnetworks.com/files/ptp450/beta PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) 7MHz Channel Bandwidth for 3.5 and 3.65 radios Removal of the PTP450 Map for faster link speeds SNMPv3 HTTPS Ability to turn off Telnet, FTP and TFTP Read-Only Accounts for Admin, Install, and Tech Sector SA Export of Sessions Status Page Config File export/Import for AP/BHM and SM/BHS NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, Cambium Jonathan
[AFMUG] DNS resolution for www.eftps.gov
Anyone having trouble resolving www.eftps.gov to 204.194.124.19. Google DNS 8.8.8.8 and 8.8.4.4 doesn't list it. Has the Government stopped collecting taxes? OpenDNS and others do resolve so keep sending your money. Maybe this is Google protesting something? PC Blaze Broadband
Re: [AFMUG] DNS resolution for www.eftps.gov
Yet another reason to not use Google's DNS. It's unreliable. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Paul Conlin via Af af@afmug.com To: af@afmug.com Sent: Wednesday, December 3, 2014 1:21:46 PM Subject: [AFMUG] DNS resolution for www.eftps.gov Anyone having trouble resolving www.eftps.gov to 204.194.124.19. Google DNS 8.8.8.8 and 8.8.4.4 doesn’t list it. Has the Government stopped collecting taxes? OpenDNS and others do resolve so keep sending your money. Maybe this is Google protesting something? PC Blaze Broadband
Re: [AFMUG] groundcontrol project
Further driven by today's post that summed up says, We don't care what you want. This is what you get. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Josh Reynolds via Af af@afmug.com To: WISPA General List wirel...@wispa.org, Ubiquiti Users Group ubnt_us...@wispa.org, af@afmug.com Sent: Wednesday, December 3, 2014 1:20:08 PM Subject: [AFMUG] groundcontrol project For thos e of you who haven't heard, several of us started a new project yesterday. https://github.com/esseph/groundcontrol Licensing is tentatively set as falling under GPLv2. We have already been offered code snip pets, a dev box, a db server, and several peop le have decided to volunteer time to make this happen. The initial idea is that the system itself will be free, with a possibly paid support/features option, or maybe a model similar to obs ervium where the is a community (free as in beer) version that comes out every 6mo or so, and a paid version with newer features and direct support. We're not sure yet, b ut we want to make this project accessible and fairly vendor-neutral. If any of you could v olunteer time, support, code, documentation, ideas, etc. it would be greatly appreciated. This is a project by and for the WISP community. Thank you! -- josh reynolds :: chief information officer spitwspots :: www.spitwspots.com
Re: [AFMUG] groundcontrol project
Cool, I thought I felt a disturbance in the force... From: Josh Reynolds via Af Sent: Wednesday, December 03, 2014 12:20 PM To: WISPA General List ; Ubiquiti Users Group ; af@afmug.com Subject: [AFMUG] groundcontrol project For those of you who haven't heard, several of us started a new project yesterday. https://github.com/esseph/groundcontrol Licensing is tentatively set as falling under GPLv2. We have already been offered code snippets, a dev box, a db server, and several people have decided to volunteer time to make this happen. The initial idea is that the system itself will be free, with a possibly paid support/features option, or maybe a model similar to observium where the is a community (free as in beer) version that comes out every 6mo or so, and a paid version with newer features and direct support. We're not sure yet, but we want to make this project accessible and fairly vendor-neutral. If any of you could volunteer time, support, code, documentation, ideas, etc. it would be greatly appreciated. This is a project by and for the WISP community. Thank you! -- josh reynolds :: chief information officer spitwspots :: www.spitwspots.com
Re: [AFMUG] DNS resolution for www.eftps.gov
Google has been blocking DNS if you use it too often because of DDOS attacks. They can block your resolution for 24 hours in some cases. Don't use it. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Mike Hammett via Af Sent: Wednesday, December 03, 2014 2:28 PM To: af@afmug.com Subject: Re: [AFMUG] DNS resolution for www.eftps.gov Yet another reason to not use Google's DNS. It's unreliable. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: Paul Conlin via Af af@afmug.com To: af@afmug.com Sent: Wednesday, December 3, 2014 1:21:46 PM Subject: [AFMUG] DNS resolution for www.eftps.gov Anyone having trouble resolving www.eftps.gov to 204.194.124.19. Google DNS 8.8.8.8 and 8.8.4.4 doesn’t list it. Has the Government stopped collecting taxes? OpenDNS and others do resolve so keep sending your money. Maybe this is Google protesting something? PC Blaze Broadband
Re: [AFMUG] groundcontrol project
This is probably the better way to go in the long run anyway. Being too dependent on any one vendor is bad idea, and this should give us all more flexibility than something like aircontrol. I'd be happy to put some time into it if there's anyway I can help out. From: Af [af-boun...@afmug.com] on behalf of Mike Hammett via Af [af@afmug.com] Sent: Wednesday, December 03, 2014 1:26 PM To: af@afmug.com Subject: Re: [AFMUG] groundcontrol project Further driven by today's post that summed up says, We don't care what you want. This is what you get. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: Josh Reynolds via Af af@afmug.com To: WISPA General List wirel...@wispa.org, Ubiquiti Users Group ubnt_us...@wispa.org, af@afmug.com Sent: Wednesday, December 3, 2014 1:20:08 PM Subject: [AFMUG] groundcontrol project For those of you who haven't heard, several of us started a new project yesterday. https://github.com/esseph/groundcontrol Licensing is tentatively set as falling under GPLv2. We have already been offered code snippets, a dev box, a db server, and several people have decided to volunteer time to make this happen. The initial idea is that the system itself will be free, with a possibly paid support/features option, or maybe a model similar to observium where the is a community (free as in beer) version that comes out every 6mo or so, and a paid version with newer features and direct support. We're not sure yet, but we want to make this project accessible and fairly vendor-neutral. If any of you could volunteer time, support, code, documentation, ideas, etc. it would be greatly appreciated. This is a project by and for the WISP community. Thank you! -- josh reynolds :: chief information officer spitwspots :: www.spitwspots.comhttp://www.spitwspots.com
Re: [AFMUG] groundcontrol project
You're not Major Tom are you? From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown via Af Sent: Wednesday, December 03, 2014 1:32 PM To: af@afmug.com Subject: Re: [AFMUG] groundcontrol project Cool, I thought I felt a disturbance in the force... From: Josh Reynolds via Afmailto:af@afmug.com Sent: Wednesday, December 03, 2014 12:20 PM To: WISPA General Listmailto:wirel...@wispa.org ; Ubiquiti Users Groupmailto:ubnt_us...@wispa.org ; af@afmug.commailto:af@afmug.com Subject: [AFMUG] groundcontrol project For those of you who haven't heard, several of us started a new project yesterday. https://github.com/esseph/groundcontrol Licensing is tentatively set as falling under GPLv2. We have already been offered code snippets, a dev box, a db server, and several people have decided to volunteer time to make this happen. The initial idea is that the system itself will be free, with a possibly paid support/features option, or maybe a model similar to observium where the is a community (free as in beer) version that comes out every 6mo or so, and a paid version with newer features and direct support. We're not sure yet, but we want to make this project accessible and fairly vendor-neutral. If any of you could volunteer time, support, code, documentation, ideas, etc. it would be greatly appreciated. This is a project by and for the WISP community. Thank you! -- josh reynolds :: chief information officer spitwspots :: www.spitwspots.comhttp://www.spitwspots.com Total Control Panel Loginhttps://asp.reflexion.net/login?domain=litewire.net To: ja...@litewire.nethttps://asp.reflexion.net/address-properties?aID=242260993domain=litewire.net From: 014a11a39556-785dab88-e25c-4c00-9b67-2b95697c65c0-000...@amazonses.comhttps://asp.reflexion.net/address-properties?aID=2885598898domain=litewire.net Removehttps://asp.reflexion.net/FooterAction?ver=2un-wl-sender-domain=1rID=242260993aID=2885598898domain=litewire.net amazonses.com from my allow list You received this message because the domain amazonses.com is on your allow list.
Re: [AFMUG] DNS resolution for www.eftps.gov
Why would they block only that one domain? PC Blaze Broadband From: Af [mailto:af-boun...@afmug.com] On Behalf Of Andy Trimmell via Af Sent: Wednesday, December 3, 2014 2:37 PM To: af@afmug.com Subject: Re: [AFMUG] DNS resolution for www.eftps.gov Google has been blocking DNS if you use it too often because of DDOS attacks. They can block your resolution for 24 hours in some cases. Don't use it. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Mike Hammett via Af Sent: Wednesday, December 03, 2014 2:28 PM To: af@afmug.com Subject: Re: [AFMUG] DNS resolution for www.eftps.gov Yet another reason to not use Google's DNS. It's unreliable. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com _ From: Paul Conlin via Af af@afmug.com To: af@afmug.com Sent: Wednesday, December 3, 2014 1:21:46 PM Subject: [AFMUG] DNS resolution for www.eftps.gov Anyone having trouble resolving www.eftps.gov to 204.194.124.19. Google DNS 8.8.8.8 and 8.8.4.4 doesn’t list it. Has the Government stopped collecting taxes? OpenDNS and others do resolve so keep sending your money. Maybe this is Google protesting something? PC Blaze Broadband
Re: [AFMUG] DNS resolution for www.eftps.gov
it works here On Wed, Dec 3, 2014 at 1:53 PM, Paul Conlin via Af af@afmug.com wrote: Why would they block only that one domain? PC Blaze Broadband *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Andy Trimmell via Af *Sent:* Wednesday, December 3, 2014 2:37 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] DNS resolution for www.eftps.gov Google has been blocking DNS if you use it too often because of DDOS attacks. They can block your resolution for 24 hours in some cases. Don't use it. *From:* Af [mailto:af-boun...@afmug.com af-boun...@afmug.com] *On Behalf Of *Mike Hammett via Af *Sent:* Wednesday, December 03, 2014 2:28 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] DNS resolution for www.eftps.gov Yet another reason to not use Google's DNS. It's unreliable. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- *From: *Paul Conlin via Af af@afmug.com *To: *af@afmug.com *Sent: *Wednesday, December 3, 2014 1:21:46 PM *Subject: *[AFMUG] DNS resolution for www.eftps.gov Anyone having trouble resolving www.eftps.gov to 204.194.124.19. Google DNS 8.8.8.8 and 8.8.4.4 doesn’t list it. Has the Government stopped collecting taxes? OpenDNS and others do resolve so keep sending your money. Maybe this is Google protesting something? PC Blaze Broadband -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
Re: [AFMUG] groundcontrol project
This is exciting. Fittingly it has a very Animal Farm vibe. Rise up! Take the power back! I am glad to help any way I can. I can't say though that I have any skills that would get you anywhere. I look forward to seeing this take shape. -Ty On Wed, Dec 3, 2014 at 1:40 PM, James Howard via Af af@afmug.com wrote: You’re not Major Tom are you? *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Chuck McCown via Af *Sent:* Wednesday, December 03, 2014 1:32 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] groundcontrol project Cool, I thought I felt a disturbance in the force... *From:* Josh Reynolds via Af af@afmug.com *Sent:* Wednesday, December 03, 2014 12:20 PM *To:* WISPA General List wirel...@wispa.org ; Ubiquiti Users Group ubnt_us...@wispa.org ; af@afmug.com *Subject:* [AFMUG] groundcontrol project For those of you who haven't heard, several of us started a new project yesterday. https://github.com/esseph/groundcontrol Licensing is tentatively set as falling under GPLv2. We have already been offered code snippets, a dev box, a db server, and several people have decided to volunteer time to make this happen. The initial idea is that the system itself will be free, with a possibly paid support/features option, or maybe a model similar to observium where the is a community (free as in beer) version that comes out every 6mo or so, and a paid version with newer features and direct support. We're not sure yet, but we want to make this project accessible and fairly vendor-neutral. If any of you could volunteer time, support, code, documentation, ideas, etc. it would be greatly appreciated. This is a project by and for the WISP community. Thank you! -- josh reynolds :: chief information officer spitwspots :: www.spitwspots.com -- *Total Control Panel* Login https://asp.reflexion.net/login?domain=litewire.net To: ja...@litewire.net https://asp.reflexion.net/address-properties?aID=242260993domain=litewire.net From: 014a11a39556-785dab88-e25c-4c00-9b67-2b95697c65c0-000...@amazonses.com https://asp.reflexion.net/address-properties?aID=2885598898domain=litewire.net Remove https://asp.reflexion.net/FooterAction?ver=2un-wl-sender-domain=1rID=242260993aID=2885598898domain=litewire.net amazonses.com from my allow list *You received this message because the domain amazonses.com http://amazonses.com is on your allow list.*
Re: [AFMUG] groundcontrol project
Yeah, I think perhaps there should be a spot on the schedule for this project? From: Ty Featherling via Af Sent: Wednesday, December 03, 2014 12:56 PM To: af@afmug.com Subject: Re: [AFMUG] groundcontrol project This is exciting. Fittingly it has a very Animal Farm vibe. Rise up! Take the power back! I am glad to help any way I can. I can't say though that I have any skills that would get you anywhere. I look forward to seeing this take shape. -Ty On Wed, Dec 3, 2014 at 1:40 PM, James Howard via Af af@afmug.com wrote: You’re not Major Tom are you? From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown via Af Sent: Wednesday, December 03, 2014 1:32 PM To: af@afmug.com Subject: Re: [AFMUG] groundcontrol project Cool, I thought I felt a disturbance in the force... From: Josh Reynolds via Af Sent: Wednesday, December 03, 2014 12:20 PM To: WISPA General List ; Ubiquiti Users Group ; af@afmug.com Subject: [AFMUG] groundcontrol project For those of you who haven't heard, several of us started a new project yesterday. https://github.com/esseph/groundcontrol Licensing is tentatively set as falling under GPLv2. We have already been offered code snippets, a dev box, a db server, and several people have decided to volunteer time to make this happen. The initial idea is that the system itself will be free, with a possibly paid support/features option, or maybe a model similar to observium where the is a community (free as in beer) version that comes out every 6mo or so, and a paid version with newer features and direct support. We're not sure yet, but we want to make this project accessible and fairly vendor-neutral. If any of you could volunteer time, support, code, documentation, ideas, etc. it would be greatly appreciated. This is a project by and for the WISP community. Thank you! -- josh reynolds :: chief information officerspitwspots :: www.spitwspots.com -- Total Control Panel Login To: ja...@litewire.net From: 014a11a39556-785dab88-e25c-4c00-9b67-2b95697c65c0-000...@amazonses.com Remove amazonses.com from my allow list You received this message because the domain amazonses.com is on your allow list.
Re: [AFMUG] groundcontrol project
I agree. -Ty On Wed, Dec 3, 2014 at 1:58 PM, Chuck McCown via Af af@afmug.com wrote: Yeah, I think perhaps there should be a spot on the schedule for this project? *From:* Ty Featherling via Af af@afmug.com *Sent:* Wednesday, December 03, 2014 12:56 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] groundcontrol project This is exciting. Fittingly it has a very Animal Farm vibe. Rise up! Take the power back! I am glad to help any way I can. I can't say though that I have any skills that would get you anywhere. I look forward to seeing this take shape. -Ty On Wed, Dec 3, 2014 at 1:40 PM, James Howard via Af af@afmug.com wrote: You’re not Major Tom are you? *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Chuck McCown via Af *Sent:* Wednesday, December 03, 2014 1:32 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] groundcontrol project Cool, I thought I felt a disturbance in the force... *From:* Josh Reynolds via Af af@afmug.com *Sent:* Wednesday, December 03, 2014 12:20 PM *To:* WISPA General List wirel...@wispa.org ; Ubiquiti Users Group ubnt_us...@wispa.org ; af@afmug.com *Subject:* [AFMUG] groundcontrol project For those of you who haven't heard, several of us started a new project yesterday. https://github.com/esseph/groundcontrol Licensing is tentatively set as falling under GPLv2. We have already been offered code snippets, a dev box, a db server, and several people have decided to volunteer time to make this happen. The initial idea is that the system itself will be free, with a possibly paid support/features option, or maybe a model similar to observium where the is a community (free as in beer) version that comes out every 6mo or so, and a paid version with newer features and direct support. We're not sure yet, but we want to make this project accessible and fairly vendor-neutral. If any of you could volunteer time, support, code, documentation, ideas, etc. it would be greatly appreciated. This is a project by and for the WISP community. Thank you! -- josh reynolds :: chief information officer spitwspots :: www.spitwspots.com -- *Total Control Panel* Login https://asp.reflexion.net/login?domain=litewire.net To: ja...@litewire.net https://asp.reflexion.net/address-properties?aID=242260993domain=litewire.net From: 014a11a39556-785dab88-e25c-4c00-9b67-2b95697c65c0-000...@amazonses.com https://asp.reflexion.net/address-properties?aID=2885598898domain=litewire.net Remove https://asp.reflexion.net/FooterAction?ver=2un-wl-sender-domain=1rID=242260993aID=2885598898domain=litewire.net amazonses.com from my allow list *You received this message because the domain amazonses.com http://amazonses.com is on your allow list.*
Re: [AFMUG] 13.3 Open Beta
I wouldn't want you to think we're looking a gift horse in the mouth or anything -- bp part {dash} 15 {at} SkylineBroadbandService {dot} com On 12/3/2014 9:44 AM, Aaron Schneider via Af wrote: Better way late than never, right? :) *From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Josh Luthman via Af *Sent:* Wednesday, December 03, 2014 11:43 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] 13.3 Open Beta Config file! Not already!!! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 3, 2014 12:41 PM, Aaron Schneider via Af af@afmug.com mailto:af@afmug.com wrote: It is definitely being considered and your voices are being heard. I just can’t comment on it just yet. :) *From:*Af [mailto:af-boun...@afmug.com mailto:af-boun...@afmug.com] *On Behalf Of *George Skorup (Cyber Broadcasting) via Af *Sent:* Wednesday, December 03, 2014 11:39 AM *To:* af@afmug.com mailto:af@afmug.com *Subject:* Re: [AFMUG] 13.3 Open Beta I really hope you guys will consider testing and releasing this for FSK. We still use a lot of it. The config file will definitely be helpful. And there's still no resolution for 2.4 FSK None frequency issue. On 12/3/2014 10:44 AM, Jonathan Mandziara via Af wrote: AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta * PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) * 7MHz Channel Bandwidth for 3.5 and 3.65 radios * Removal of the PTP450 Map for faster link speeds * SNMPv3 * HTTPS * Ability to turn off Telnet, FTP and TFTP * Read-Only Accounts for Admin, Install, and Tech * Sector SA * Export of Sessions Status Page * Config File export/Import for AP/BHM and SM/BHS *NOTE:* PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, C*a*mbium Jonathan
Re: [AFMUG] 13.3 Open Beta
Can we use the Sessions Status export file to import into the Capacity Planner? On 12/3/2014 10:44 AM, Jonathan Mandziara via Af wrote: # PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) # 7MHz Channel Bandwidth for 3.5 and 3.65 radios # Removal of the PTP450 Map for faster link speeds # SNMPv3 # HTTPS # Ability to turn off Telnet, FTP and TFTP # Read-Only Accounts for Admin, Install, and Tech # Sector SA # Export of Sessions Status Page # Config File export/Import for AP/BHM and SM/BHS
Re: [AFMUG] 13.3 Open Beta
Fortunately, we never bought the WiMax Kool-Aid. -- bp part {dash} 15 {at} SkylineBroadbandService {dot} com On 12/3/2014 10:13 AM, Rajesh Vijayakumar via Af wrote: We are looking specifically for beta coverage on PMP320 co-location. If anyone is trying this or have specific questions, please let us know. You can also contact me off-list at rajesh.vijayaku...@cambiumnetworks.com mailto:rajesh.vijayaku...@cambiumnetworks.com. Rajesh Vijayakumar Cambium Networks On Wed, Dec 3, 2014 at 10:44 AM, Jonathan Mandziara via Af af@afmug.com mailto:af@afmug.com wrote: AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta * PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) * 7MHz Channel Bandwidth for 3.5 and 3.65 radios * Removal of the PTP450 Map for faster link speeds * SNMPv3 * HTTPS * Ability to turn off Telnet, FTP and TFTP * Read-Only Accounts for Admin, Install, and Tech * Sector SA * Export of Sessions Status Page * Config File export/Import for AP/BHM and SM/BHS *NOTE:* PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, C*a*mbium Jonathan
Re: [AFMUG] 13.3 Open Beta
All the different timing products, Packetflux, CTM, CMM have compatible timing. There are differences, but they differences are tiny. However, I would sync all co-located devices to the fewest number of devices you can deal with. We are not 100% this way, and we've gotten away with it for the most part. BUT, timing problems are a royal PITA to troubleshoot. -- bp part {dash} 15 {at} SkylineBroadbandService {dot} com On 12/3/2014 10:57 AM, Mark Radabaugh via Af wrote: I’m going to try this out as soon as I can get a 450AP 3.65 on the site. Question - the comment about CMM timing source. Was this ‘it works best if all devices have the same timing source’ or is there something specific to the CMM itself?Is ask because we usually use LMG CTM’s at these sites. The timing all comes from the same timing source, but it’s not your CMM. Mark On Dec 3, 2014, at 1:13 PM, Rajesh Vijayakumar via Af af@afmug.com mailto:af@afmug.com wrote: We are looking specifically for beta coverage on PMP320 co-location. If anyone is trying this or have specific questions, please let us know. You can also contact me off-list at rajesh.vijayaku...@cambiumnetworks.com mailto:rajesh.vijayaku...@cambiumnetworks.com. Rajesh Vijayakumar Cambium Networks On Wed, Dec 3, 2014 at 10:44 AM, Jonathan Mandziara via Af af@afmug.com mailto:af@afmug.com wrote: AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta * PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) * 7MHz Channel Bandwidth for 3.5 and 3.65 radios * Removal of the PTP450 Map for faster link speeds * SNMPv3 * HTTPS * Ability to turn off Telnet, FTP and TFTP * Read-Only Accounts for Admin, Install, and Tech * Sector SA * Export of Sessions Status Page * Config File export/Import for AP/BHM and SM/BHS *NOTE:* PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, C*a*mbium Jonathan
Re: [AFMUG] DNS resolution for www.eftps.gov
Much quicker on your own servers. ;-) C:\Users\mhammettdig www.eftps.gov@65.182.164.74 ; DiG 9.10.1 www.eftps.gov@65.182.164.74 ;; global options: +cmd ;; Got answer: ;; -HEADER- opcode: QUERY, status: NXDOMAIN, id: 9450 ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 1 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 4096 ;; QUESTION SECTION: ;www.eftps.gov\@65.182.164.74. IN A ;; AUTHORITY SECTION: . 76800 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2014120301 1800 900 604800 86400 ;; Query time: 62 msec ;; SERVER: 65.182.164.56#53(65.182.164.56) ;; WHEN: Wed Dec 03 14:15:57 Central Standard Time 2014 ;; MSG SIZE rcvd: 131 C:\Users\mhammettdig www.eftps.gov@65.182.164.56 ; DiG 9.10.1 www.eftps.gov@65.182.164.56 ;; global options: +cmd ;; Got answer: ;; -HEADER- opcode: QUERY, status: NXDOMAIN, id: 54616 ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 1 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 4096 ;; QUESTION SECTION: ;www.eftps.gov\@65.182.164.56. IN A ;; AUTHORITY SECTION: . 76796 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2014120301 1800 900 604800 86400 ;; Query time: 89 msec ;; SERVER: 65.182.164.56#53(65.182.164.56) ;; WHEN: Wed Dec 03 14:16:00 Central Standard Time 2014 ;; MSG SIZE rcvd: 131 - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Josh Luthman via Af af@afmug.com To: af@afmug.com Sent: Wednesday, December 3, 2014 1:56:57 PM Subject: Re: [AFMUG] DNS resolution for www.eftps.gov Takes a lng time (4 seconds omg!) C:\Users\jluthmandig www.eftps.gov @ 8.8.8.8 ; DiG 9.3.2 www.eftps.gov @ 8.8.8.8 ; (1 server found) ;; global options: printcmd ;; Got answer: ;; -HEADER- opcode: QUERY, status: NOERROR, id: 689 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ; www.eftps.gov . IN A ;; ANSWER SECTION: www.eftps.gov . 0 IN A 204.194.124.19 ;; Query time: 4046 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Wed Dec 03 14:55:50 2014 ;; MSG SIZE rcvd: 47 Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Dec 3, 2014 at 2:53 PM, That One Guy via Af af@afmug.com wrote: it works here On Wed, Dec 3, 2014 at 1:53 PM, Paul Conlin via Af af@afmug.com wrote: blockquote Why would they block only that one domain? PC Blaze Broadband From: Af [mailto: af-boun...@afmug.com ] On Behalf Of Andy Trimmell via Af Sent: Wednesday, December 3, 2014 2:37 PM To: af@afmug.com Subject: Re: [AFMUG] DNS resolution for www.eftps.gov Google has been blocking DNS if you use it too often because of DDOS attacks. They can block your resolution for 24 hours in some cases. Don't use it. From: Af [ mailto:af-boun...@afmug.com ] On Behalf Of Mike Hammett via Af Sent: Wednesday, December 03, 2014 2:28 PM To: af@afmug.com Subject: Re: [AFMUG] DNS resolution for www.eftps.gov Yet another reason to not use Google's DNS. It's unreliable. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: Paul Conlin via Af af@afmug.com To: af@afmug.com Sent: Wednesday, December 3, 2014 1:21:46 PM Subject: [AFMUG] DNS resolution for www.eftps.gov Anyone having trouble resolving www.eftps.gov to 204.194.124.19. Google DNS 8.8.8.8 and 8.8.4.4 doesn’t list it. Has the Government stopped collecting taxes? OpenDNS and others do resolve so keep sending your money. Maybe this is Google protesting something? PC Blaze Broadband -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925 /blockquote
Re: [AFMUG] DNS resolution for www.eftps.gov
Man your server is slow. Mine: ;; Query time: 5 msec Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Dec 3, 2014 at 3:16 PM, Mike Hammett via Af af@afmug.com wrote: Much quicker on your own servers. ;-) C:\Users\mhammettdig www.eftps.gov@65.182.164.74 ; DiG 9.10.1 www.eftps.gov@65.182.164.74 ;; global options: +cmd ;; Got answer: ;; -HEADER- opcode: QUERY, status: NXDOMAIN, id: 9450 ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 1 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 4096 ;; QUESTION SECTION: ;www.eftps.gov\@65.182.164.74. IN A ;; AUTHORITY SECTION: . 76800 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2014120301 1800 900 604800 86400 ;; Query time: 62 msec ;; SERVER: 65.182.164.56#53(65.182.164.56) ;; WHEN: Wed Dec 03 14:15:57 Central Standard Time 2014 ;; MSG SIZE rcvd: 131 C:\Users\mhammettdig www.eftps.gov@65.182.164.56 ; DiG 9.10.1 www.eftps.gov@65.182.164.56 ;; global options: +cmd ;; Got answer: ;; -HEADER- opcode: QUERY, status: NXDOMAIN, id: 54616 ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 1 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 4096 ;; QUESTION SECTION: ;www.eftps.gov\@65.182.164.56. IN A ;; AUTHORITY SECTION: . 76796 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2014120301 1800 900 604800 86400 ;; Query time: 89 msec ;; SERVER: 65.182.164.56#53(65.182.164.56) ;; WHEN: Wed Dec 03 14:16:00 Central Standard Time 2014 ;; MSG SIZE rcvd: 131 - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- *From: *Josh Luthman via Af af@afmug.com *To: *af@afmug.com *Sent: *Wednesday, December 3, 2014 1:56:57 PM *Subject: *Re: [AFMUG] DNS resolution for www.eftps.gov Takes a lng time (4 seconds omg!) C:\Users\jluthmandig www.eftps.gov @8.8.8.8 ; DiG 9.3.2 www.eftps.gov @8.8.8.8 ; (1 server found) ;; global options: printcmd ;; Got answer: ;; -HEADER- opcode: QUERY, status: NOERROR, id: 689 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;www.eftps.gov. IN A ;; ANSWER SECTION: www.eftps.gov. 0 IN A 204.194.124.19 ;; Query time: 4046 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Wed Dec 03 14:55:50 2014 ;; MSG SIZE rcvd: 47 Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Dec 3, 2014 at 2:53 PM, That One Guy via Af af@afmug.com wrote: it works here On Wed, Dec 3, 2014 at 1:53 PM, Paul Conlin via Af af@afmug.com wrote: Why would they block only that one domain? PC Blaze Broadband *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Andy Trimmell via Af *Sent:* Wednesday, December 3, 2014 2:37 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] DNS resolution for www.eftps.gov Google has been blocking DNS if you use it too often because of DDOS attacks. They can block your resolution for 24 hours in some cases. Don't use it. *From:* Af [mailto:af-boun...@afmug.com af-boun...@afmug.com] *On Behalf Of *Mike Hammett via Af *Sent:* Wednesday, December 03, 2014 2:28 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] DNS resolution for www.eftps.gov Yet another reason to not use Google's DNS. It's unreliable. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- *From: *Paul Conlin via Af af@afmug.com *To: *af@afmug.com *Sent: *Wednesday, December 3, 2014 1:21:46 PM *Subject: *[AFMUG] DNS resolution for www.eftps.gov Anyone having trouble resolving www.eftps.gov to 204.194.124.19. Google DNS 8.8.8.8 and 8.8.4.4 doesn’t list it. Has the Government stopped collecting taxes? OpenDNS and others do resolve so keep sending your money. Maybe this is Google protesting something? PC Blaze Broadband -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
Re: [AFMUG] Cold weather gloves
A trick our tower climbers taught me is to wear a pair of the thick latex 5mm+ gloves underneath a set of lighter, tighter stretchy winter gloves. This allows you to retain much more dexterity without sacrificing much warmth. Ever since using this trick, i RARELY get cold fingers. I can typically make a set of the rubber gloves last a couple days of taking them on and off. You can pick up a 500 pack for pretty cheap. They are usually a sweet black or purple color. Very stylish. It goes against everything I've been taught as far as winter clothes and breath-ability, but it actually works. Your hands will be sweaty, but warm. You also will be able to hold bolts and nuts. The other added benefit is that if you have to remove your gloves to do something like put an ethernet end on, you just leave the rubbers on and slip your outter glove off. Your hand doesnt get cold near as fast because it's blocked from the wind somewhat. I have since told a couple friends that work out in the cold all day long doing construction, and they now buy those gloves by the case. On Wed, Dec 3, 2014 at 10:42 AM, Jaime Solorza via Af af@afmug.com wrote: I have used Ironclad for years. For climbing I use the Box Handlers Jaime Solorza On Dec 2, 2014 8:12 PM, Jay Weekley via Af af@afmug.com wrote: Now that we're approaching Winter in the great white North Alabama and Christmas is near I need some good cold weather gloves. Normally, the coldest we work in is the 20's (Fahrenheit) and I really would like to find something that allows me to work with small tools with reasonable dexterity but keep my hands warm. Any suggestions? Am I being unrealistic?
Re: [AFMUG] Cold weather gloves
Like this, Kade? http://www.amazon.com/SAS-Safety-6603-Thickster-Textured/dp/B0002STTW0 Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Dec 3, 2014 at 3:38 PM, Kade Sullivan via Af af@afmug.com wrote: A trick our tower climbers taught me is to wear a pair of the thick latex 5mm+ gloves underneath a set of lighter, tighter stretchy winter gloves. This allows you to retain much more dexterity without sacrificing much warmth. Ever since using this trick, i RARELY get cold fingers. I can typically make a set of the rubber gloves last a couple days of taking them on and off. You can pick up a 500 pack for pretty cheap. They are usually a sweet black or purple color. Very stylish. It goes against everything I've been taught as far as winter clothes and breath-ability, but it actually works. Your hands will be sweaty, but warm. You also will be able to hold bolts and nuts. The other added benefit is that if you have to remove your gloves to do something like put an ethernet end on, you just leave the rubbers on and slip your outter glove off. Your hand doesnt get cold near as fast because it's blocked from the wind somewhat. I have since told a couple friends that work out in the cold all day long doing construction, and they now buy those gloves by the case. On Wed, Dec 3, 2014 at 10:42 AM, Jaime Solorza via Af af@afmug.com wrote: I have used Ironclad for years. For climbing I use the Box Handlers Jaime Solorza On Dec 2, 2014 8:12 PM, Jay Weekley via Af af@afmug.com wrote: Now that we're approaching Winter in the great white North Alabama and Christmas is near I need some good cold weather gloves. Normally, the coldest we work in is the 20's (Fahrenheit) and I really would like to find something that allows me to work with small tools with reasonable dexterity but keep my hands warm. Any suggestions? Am I being unrealistic?
Re: [AFMUG] Cold weather gloves
Wow those are 14mm. Very thick. Those would work great. Honestly have never used nitrate gloves that thick. They may actually be tough to take on and off because of the thickness and lack of stretch compared to the lighter gloves. These are what I typically use. http://www.amazon.com/SAS-Safety-66518-Powder-Free-Disposable/dp/B002XXO60M/ref=sr_1_1?s=hiie=UTF8qid=1417640394sr=1-1keywords=SAS+Safety+66518+Raven+Powder-Free+Disposable+Black+Nitrile+6+Mil+Gloves%2C+Large%2C+100+Gloves+by+Weight On Wed, Dec 3, 2014 at 2:42 PM, Josh Luthman via Af af@afmug.com wrote: Like this, Kade? http://www.amazon.com/SAS-Safety-6603-Thickster-Textured/dp/B0002STTW0 Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Dec 3, 2014 at 3:38 PM, Kade Sullivan via Af af@afmug.com wrote: A trick our tower climbers taught me is to wear a pair of the thick latex 5mm+ gloves underneath a set of lighter, tighter stretchy winter gloves. This allows you to retain much more dexterity without sacrificing much warmth. Ever since using this trick, i RARELY get cold fingers. I can typically make a set of the rubber gloves last a couple days of taking them on and off. You can pick up a 500 pack for pretty cheap. They are usually a sweet black or purple color. Very stylish. It goes against everything I've been taught as far as winter clothes and breath-ability, but it actually works. Your hands will be sweaty, but warm. You also will be able to hold bolts and nuts. The other added benefit is that if you have to remove your gloves to do something like put an ethernet end on, you just leave the rubbers on and slip your outter glove off. Your hand doesnt get cold near as fast because it's blocked from the wind somewhat. I have since told a couple friends that work out in the cold all day long doing construction, and they now buy those gloves by the case. On Wed, Dec 3, 2014 at 10:42 AM, Jaime Solorza via Af af@afmug.com wrote: I have used Ironclad for years. For climbing I use the Box Handlers Jaime Solorza On Dec 2, 2014 8:12 PM, Jay Weekley via Af af@afmug.com wrote: Now that we're approaching Winter in the great white North Alabama and Christmas is near I need some good cold weather gloves. Normally, the coldest we work in is the 20's (Fahrenheit) and I really would like to find something that allows me to work with small tools with reasonable dexterity but keep my hands warm. Any suggestions? Am I being unrealistic?
Re: [AFMUG] 13.3 Open Beta
Mark, We have tested with CMM only, but it should work with other sync over power solutions. Please let me know if you see any issues. Rajesh Vijayakumar Cambium Networks On Wed, Dec 3, 2014 at 12:57 PM, Mark Radabaugh via Af af@afmug.com wrote: I’m going to try this out as soon as I can get a 450AP 3.65 on the site. Question - the comment about CMM timing source. Was this ‘it works best if all devices have the same timing source’ or is there something specific to the CMM itself?Is ask because we usually use LMG CTM’s at these sites. The timing all comes from the same timing source, but it’s not your CMM. Mark On Dec 3, 2014, at 1:13 PM, Rajesh Vijayakumar via Af af@afmug.com wrote: We are looking specifically for beta coverage on PMP320 co-location. If anyone is trying this or have specific questions, please let us know. You can also contact me off-list at rajesh.vijayaku...@cambiumnetworks.com. Rajesh Vijayakumar Cambium Networks On Wed, Dec 3, 2014 at 10:44 AM, Jonathan Mandziara via Af af@afmug.com wrote: AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta - PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) - 7MHz Channel Bandwidth for 3.5 and 3.65 radios - Removal of the PTP450 Map for faster link speeds - SNMPv3 - HTTPS - Ability to turn off Telnet, FTP and TFTP - Read-Only Accounts for Admin, Install, and Tech - Sector SA - Export of Sessions Status Page - Config File export/Import for AP/BHM and SM/BHS *NOTE:* PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, C*a*mbium Jonathan
Re: [AFMUG] DNS resolution for www.eftps.gov
Works here on 8.8.8.8 From: Af [mailto:af-boun...@afmug.com] On Behalf Of That One Guy via Af Sent: Wednesday, December 03, 2014 11:54 AM To: af@afmug.com Subject: Re: [AFMUG] DNS resolution for www.eftps.gov it works here On Wed, Dec 3, 2014 at 1:53 PM, Paul Conlin via Af af@afmug.com mailto:af@afmug.com wrote: Why would they block only that one domain? PC Blaze Broadband From: Af [mailto:af-boun...@afmug.com mailto:af-boun...@afmug.com ] On Behalf Of Andy Trimmell via Af Sent: Wednesday, December 3, 2014 2:37 PM To: af@afmug.com mailto:af@afmug.com Subject: Re: [AFMUG] DNS resolution for www.eftps.gov http://www.eftps.gov Google has been blocking DNS if you use it too often because of DDOS attacks. They can block your resolution for 24 hours in some cases. Don't use it. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Mike Hammett via Af Sent: Wednesday, December 03, 2014 2:28 PM To: af@afmug.com mailto:af@afmug.com Subject: Re: [AFMUG] DNS resolution for www.eftps.gov http://www.eftps.gov Yet another reason to not use Google's DNS. It's unreliable. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com _ From: Paul Conlin via Af af@afmug.com mailto:af@afmug.com To: af@afmug.com mailto:af@afmug.com Sent: Wednesday, December 3, 2014 1:21:46 PM Subject: [AFMUG] DNS resolution for www.eftps.gov http://www.eftps.gov Anyone having trouble resolving www.eftps.gov http://www.eftps.gov to 204.194.124.19. Google DNS 8.8.8.8 and 8.8.4.4 doesn’t list it. Has the Government stopped collecting taxes? OpenDNS and others do resolve so keep sending your money. Maybe this is Google protesting something? PC Blaze Broadband -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
Re: [AFMUG] groundcontrol project
No code chops to speak of but I can provide moral support!!! From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ty Featherling via Af Sent: Wednesday, December 03, 2014 12:04 PM To: af@afmug.com Subject: Re: [AFMUG] groundcontrol project I agree. -Ty On Wed, Dec 3, 2014 at 1:58 PM, Chuck McCown via Af af@afmug.com mailto:af@afmug.com wrote: Yeah, I think perhaps there should be a spot on the schedule for this project? From: Ty Featherling via Af mailto:af@afmug.com Sent: Wednesday, December 03, 2014 12:56 PM To: af@afmug.com mailto:af@afmug.com Subject: Re: [AFMUG] groundcontrol project This is exciting. Fittingly it has a very Animal Farm vibe. Rise up! Take the power back! I am glad to help any way I can. I can't say though that I have any skills that would get you anywhere. I look forward to seeing this take shape. -Ty On Wed, Dec 3, 2014 at 1:40 PM, James Howard via Af af@afmug.com mailto:af@afmug.com wrote: You’re not Major Tom are you? From: Af [mailto:af-boun...@afmug.com mailto:af-boun...@afmug.com ] On Behalf Of Chuck McCown via Af Sent: Wednesday, December 03, 2014 1:32 PM To: af@afmug.com mailto:af@afmug.com Subject: Re: [AFMUG] groundcontrol project Cool, I thought I felt a disturbance in the force... From: Josh Reynolds via Af mailto:af@afmug.com Sent: Wednesday, December 03, 2014 12:20 PM To: WISPA General List mailto:wirel...@wispa.org ; Ubiquiti Users Group mailto:ubnt_us...@wispa.org ; af@afmug.com mailto:af@afmug.com Subject: [AFMUG] groundcontrol project For those of you who haven't heard, several of us started a new project yesterday. https://github.com/esseph/groundcontrol Licensing is tentatively set as falling under GPLv2. We have already been offered code snippets, a dev box, a db server, and several people have decided to volunteer time to make this happen. The initial idea is that the system itself will be free, with a possibly paid support/features option, or maybe a model similar to observium where the is a community (free as in beer) version that comes out every 6mo or so, and a paid version with newer features and direct support. We're not sure yet, but we want to make this project accessible and fairly vendor-neutral. If any of you could volunteer time, support, code, documentation, ideas, etc. it would be greatly appreciated. This is a project by and for the WISP community. Thank you! -- josh reynolds :: chief information officer spitwspots :: www.spitwspots.com http://www.spitwspots.com _ Total Control Panel Login https://asp.reflexion.net/login?domain=litewire.net To: ja...@litewire.net https://asp.reflexion.net/address-properties?aID=242260993domain=litewire.net From: 014a11a39556-785dab88-e25c-4c00-9b67-2b95697c65c0-000...@amazonses.com https://asp.reflexion.net/address-properties?aID=2885598898domain=litewire.net Remove https://asp.reflexion.net/FooterAction?ver=2un-wl-sender-domain=1rID=242260993aID=2885598898domain=litewire.net amazonses.com http://amazonses.com from my allow list You received this message because the domain amazonses.com http://amazonses.com is on your allow list.
Re: [AFMUG] Cold weather gloves
On 12/3/14, 13:41, Jaime Solorza via Af wrote: man you guys sure are into LatexI am on the AF WISP list right? Well, bring out the gimp.
Re: [AFMUG] Cold weather gloves
yikes... Jaime Solorza Wireless Systems Architect 915-861-1390 On Wed, Dec 3, 2014 at 2:49 PM, Seth Mattinen via Af af@afmug.com wrote: On 12/3/14, 13:41, Jaime Solorza via Af wrote: man you guys sure are into LatexI am on the AF WISP list right? Well, bring out the gimp.
Re: [AFMUG] Cold weather gloves
you mean eGimp right?!?! On Wed, Dec 3, 2014 at 2:49 PM, Seth Mattinen via Af af@afmug.com wrote: On 12/3/14, 13:41, Jaime Solorza via Af wrote: man you guys sure are into LatexI am on the AF WISP list right? Well, bring out the gimp.
Re: [AFMUG] Cold weather gloves
A trick our tower climbers taught me is to wear a pair of the thick latex 5mm+ gloves underneath a set of lighter, tighter stretchy winter gloves. This allows you to retain much more dexterity without sacrificing much warmth. Ever since using this trick, i RARELY get cold fingers. I can typically make a set of the rubber gloves last a couple days of taking them on and off. You can pick up a 500 pack for pretty cheap. They are usually a sweet black or purple color. Very stylish. It goes against everything I've been taught as far as winter clothes and breath-ability, but it actually works. Your hands will be sweaty, but warm. You also will be able to hold bolts and nuts. The other added benefit is that if you have to remove your gloves to do something like put an ethernet end on, you just leave the rubbers on and slip your outter glove off. Your hand doesnt get cold near as fast because it's blocked from the wind somewhat. I have since told a couple friends that work out in the cold all day long doing construction, and they now buy those gloves by the case. Heard this from you or someone in past. Tried these under regular gloves. http://www.amazon.com/SafeTouch-Nitrile-Gloves-Latex-Powder/dp/B0019QXACO They really did not seem to help much at all for me. When I took my regular gloves off and just had the Nitrile ones on my hands did not seem to stay any warmer. Are these a wrong choice?
Re: [AFMUG] 13.3 Open Beta
Hi Jonathan, The way Sector SA is being implemented won’t give the best possible results in practice. Since it is not paying attention to the sync pulses, but just coordinating running an AP spectrum scan with the SMs you are still going to see a bunch of bogus energy from co-located access points. In order to do this in a way where you can really see what the spectrum looks like, the AP should only perform SA during its appointed receive windows and not during the TX windows of other co-located equipment. Another side effect for those of us running fancy beam forming antenna arrays is we can never use ‘Sector SA’ at all, since it is listening during the TX windows of other access points connected to the beam former and getting high RF levels shoved into its RX side. Peter Kranz Founder/CEO - Unwired Ltd http://www.unwiredltd.com/ www.UnwiredLtd.com Desk: 510-868-1614 x100 Mobile: 510-207- mailto:pkr...@unwiredltd.com pkr...@unwiredltd.com From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jonathan Mandziara via Af Sent: Wednesday, December 03, 2014 8:44 AM To: af@afmug.com Subject: [AFMUG] 13.3 Open Beta AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta * PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) * 7MHz Channel Bandwidth for 3.5 and 3.65 radios * Removal of the PTP450 Map for faster link speeds * SNMPv3 * HTTPS * Ability to turn off Telnet, FTP and TFTP * Read-Only Accounts for Admin, Install, and Tech * Sector SA * Export of Sessions Status Page * Config File export/Import for AP/BHM and SM/BHS NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, Cambium Jonathan
Re: [AFMUG] 13.3 Open Beta
Ideally you'd run this on all same-band co-located sectors at the same time. But yeah, my thought was close to yours. We have some towers only a mile or two apart and the SMs will definitely pick them up. This is one reason why I mentioned AP mode background SA. Schedule an Rx slot for background SA and give me a 1 or 5 minute average of my current channel. This is pretty much what happens with LBT now anyway. On 12/3/2014 5:25 PM, Peter Kranz via Af wrote: Hi Jonathan, The way Sector SA is being implemented won’t give the best possible results in practice. Since it is not paying attention to the sync pulses, but just coordinating running an AP spectrum scan with the SMs you are still going to see a bunch of bogus energy from co-located access points. In order to do this in a way where you can really see what the spectrum looks like, the AP should only perform SA during its appointed receive windows and not during the TX windows of other co-located equipment. Another side effect for those of us running fancy beam forming antenna arrays is we can never use ‘Sector SA’ at all, since it is listening during the TX windows of other access points connected to the beam former and getting high RF levels shoved into its RX side. *Peter Kranz *Founder/CEO - Unwired Ltd www.UnwiredLtd.com http://www.unwiredltd.com/ Desk: 510-868-1614 x100 Mobile: 510-207- pkr...@unwiredltd.com mailto:pkr...@unwiredltd.com *From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Jonathan Mandziara via Af *Sent:* Wednesday, December 03, 2014 8:44 AM *To:* af@afmug.com *Subject:* [AFMUG] 13.3 Open Beta AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta * PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) * 7MHz Channel Bandwidth for 3.5 and 3.65 radios * Removal of the PTP450 Map for faster link speeds * SNMPv3 * HTTPS * Ability to turn off Telnet, FTP and TFTP * Read-Only Accounts for Admin, Install, and Tech * Sector SA * Export of Sessions Status Page * Config File export/Import for AP/BHM and SM/BHS *NOTE:* PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, C*a*mbium Jonathan
Re: [AFMUG] 13.3 Open Beta
And look at the in-service SA features now offered on the latest RocketM5AC-Lite and upcoming mimosa products.. They can perform AP SA’s while remaining in service by listening during spare RX cycles.. no need to take down the AP or worse an entire tower.. everything pays attention to sync and you keep in service. From: Af [mailto:af-boun...@afmug.com] On Behalf Of George Skorup (Cyber Broadcasting) via Af Sent: Wednesday, December 03, 2014 3:37 PM To: af@afmug.com Subject: Re: [AFMUG] 13.3 Open Beta Ideally you'd run this on all same-band co-located sectors at the same time. But yeah, my thought was close to yours. We have some towers only a mile or two apart and the SMs will definitely pick them up. This is one reason why I mentioned AP mode background SA. Schedule an Rx slot for background SA and give me a 1 or 5 minute average of my current channel. This is pretty much what happens with LBT now anyway. On 12/3/2014 5:25 PM, Peter Kranz via Af wrote: Hi Jonathan, The way Sector SA is being implemented won’t give the best possible results in practice. Since it is not paying attention to the sync pulses, but just coordinating running an AP spectrum scan with the SMs you are still going to see a bunch of bogus energy from co-located access points. In order to do this in a way where you can really see what the spectrum looks like, the AP should only perform SA during its appointed receive windows and not during the TX windows of other co-located equipment. Another side effect for those of us running fancy beam forming antenna arrays is we can never use ‘Sector SA’ at all, since it is listening during the TX windows of other access points connected to the beam former and getting high RF levels shoved into its RX side. Peter Kranz Founder/CEO - Unwired Ltd http://www.unwiredltd.com/ www.UnwiredLtd.com Desk: 510-868-1614 x100 Mobile: 510-207- mailto:pkr...@unwiredltd.com pkr...@unwiredltd.com From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jonathan Mandziara via Af Sent: Wednesday, December 03, 2014 8:44 AM To: af@afmug.com mailto:af@afmug.com Subject: [AFMUG] 13.3 Open Beta AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta * PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) * 7MHz Channel Bandwidth for 3.5 and 3.65 radios * Removal of the PTP450 Map for faster link speeds * SNMPv3 * HTTPS * Ability to turn off Telnet, FTP and TFTP * Read-Only Accounts for Admin, Install, and Tech * Sector SA * Export of Sessions Status Page * Config File export/Import for AP/BHM and SM/BHS NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, Cambium Jonathan
[AFMUG] N00b question
For the connectorized FSK AP's, what is the bulkhead connection type mounted on the AP? The opposite end is an N connector (that connects to the antenna) but I don't what the connector type is used for the board - pigtail? I think it is an SMP connector but wanted to ask to be sure. For reference it is the same connector that attaches to the GPS module of a CMM4 to the N-connector passthrough box or whatever that silver block is. Timothy McNabb Network Administrator Velociter Wireless, Inc (209)838-1221 x107
Re: [AFMUG] N00b question
Or might be an MCX connector? :( -Tim From: Af [mailto:af-boun...@afmug.com] On Behalf Of Timothy D. McNabb via Af Sent: Wednesday, December 03, 2014 4:03 PM To: af@afmug.com Subject: [AFMUG] N00b question For the connectorized FSK AP's, what is the bulkhead connection type mounted on the AP? The opposite end is an N connector (that connects to the antenna) but I don't what the connector type is used for the board - pigtail? I think it is an SMP connector but wanted to ask to be sure. For reference it is the same connector that attaches to the GPS module of a CMM4 to the N-connector passthrough box or whatever that silver block is. Timothy McNabb Network Administrator Velociter Wireless, Inc (209)838-1221 x107
Re: [AFMUG] N00b question
MCX On 12/3/2014 6:03 PM, Timothy D. McNabb via Af wrote: For the connectorized FSK AP�s, what is the bulkhead connection type mounted on the AP? The opposite end is an N connector (that connects to the antenna) but I don�t what the connector type is used for the board - pigtail? I think it is an SMP connector but wanted to ask to be sure. For reference it is the same connector that attaches to the GPS module of a CMM4 to the N-connector passthrough box or whatever that silver block is. Timothy McNabb Network Administrator Velociter Wireless, Inc (209)838-1221 x107
Re: [AFMUG] 13.3 Open Beta
The way Sector SA is being implemented won’t give the best possible results in practice. Since it is not paying attention to the sync pulses, but just coordinating running an AP spectrum scan with the SMs you are still going to see a bunch of bogus energy from co-located access points. In order to do this in a way where you can really see what the My thought is to open 4 tabs in my web browser and run all the AP's in cluster at one time. Is there an SNMP command to do this? Would be nice to run a system wide SA every few months. Could not open enough tabs to do this but would be easy with a perl script and SNMP. Would be nice to be able to retrieve the results with SNMP as well. spectrum looks like, the AP should only perform SA during its appointed receive windows and not during the TX windows of other co-located equipment. Another side effect for those of us running fancy beam forming antenna arrays is we can never use ‘Sector SA’ at all, since it is Where do you get 'beam forming antenna's for 450 gear? listening during the TX windows of other access points connected to the beam former and getting high RF levels shoved into its RX side.
Re: [AFMUG] N00b question
Thanks George! -Tim From: Af [mailto:af-boun...@afmug.com] On Behalf Of George Skorup (Cyber Broadcasting) via Af Sent: Wednesday, December 03, 2014 4:12 PM To: af@afmug.com Subject: Re: [AFMUG] N00b question MCX On 12/3/2014 6:03 PM, Timothy D. McNabb via Af wrote: For the connectorized FSK AP�s, what is the bulkhead connection type mounted on the AP? The opposite end is an N connector (that connects to the antenna) but I don�t what the connector type is used for the board - pigtail? I think it is an SMP connector but wanted to ask to be sure. � For reference it is the same connector that attaches to the GPS module of a CMM4 to the N-connector passthrough box or whatever that silver block is. � Timothy McNabb Network Administrator Velociter Wireless, Inc (209)838-1221 x107 �
Re: [AFMUG] N00b question
So now that I know the cable, any recommendations for good cable builders for custom lengths? Needs to be UV rated, able to withstand the elements and low impedance (50ohm). -Tim From: Af [mailto:af-boun...@afmug.com] On Behalf Of Timothy D. McNabb via Af Sent: Wednesday, December 03, 2014 4:14 PM To: af@afmug.com Subject: Re: [AFMUG] N00b question Thanks George! -Tim From: Af [mailto:af-boun...@afmug.com] On Behalf Of George Skorup (Cyber Broadcasting) via Af Sent: Wednesday, December 03, 2014 4:12 PM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] N00b question MCX On 12/3/2014 6:03 PM, Timothy D. McNabb via Af wrote: For the connectorized FSK AP�s, what is the bulkhead connection type mounted on the AP? The opposite end is an N connector (that connects to the antenna) but I don�t what the connector type is used for the board - pigtail? I think it is an SMP connector but wanted to ask to be sure. � For reference it is the same connector that attaches to the GPS module of a CMM4 to the N-connector passthrough box or whatever that silver block is. � Timothy McNabb Network Administrator Velociter Wireless, Inc (209)838-1221 x107 �
Re: [AFMUG] N00b question
Do you need something longer than you can get from a 900Mhz SM?We just take them out of dead radios. Mark On Dec 3, 2014, at 7:35 PM, Timothy D. McNabb via Af af@afmug.com wrote: So now that I know the cable, any recommendations for good cable builders for custom lengths? Needs to be UV rated, able to withstand the elements and low impedance (50ohm). -Tim From: Af [mailto:af-boun...@afmug.com mailto:af-boun...@afmug.com] On Behalf Of Timothy D. McNabb via Af Sent: Wednesday, December 03, 2014 4:14 PM To: af@afmug.com mailto:af@afmug.com Subject: Re: [AFMUG] N00b question Thanks George! -Tim From: Af [mailto:af-boun...@afmug.com mailto:af-boun...@afmug.com] On Behalf Of George Skorup (Cyber Broadcasting) via Af Sent: Wednesday, December 03, 2014 4:12 PM To: af@afmug.com mailto:af@afmug.com Subject: Re: [AFMUG] N00b question MCX On 12/3/2014 6:03 PM, Timothy D. McNabb via Af wrote: For the connectorized FSK AP�s, what is the bulkhead connection type mounted on the AP? The opposite end is an N connector (that connects to the antenna) but I don�t what the connector type is used for the board - pigtail? I think it is an SMP connector but wanted to ask to be sure. � For reference it is the same connector that attaches to the GPS module of a CMM4 to the N-connector passthrough box or whatever that silver block is. � Timothy McNabb Network Administrator Velociter Wireless, Inc (209)838-1221 x107 �
Re: [AFMUG] 13.3 Open Beta
Where do you get 'beam forming antenna's for 450 gear? ET Industries..
Re: [AFMUG] 13.3 Open Beta
How them working? Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr On 12/3/14, 8:50 PM, Peter Kranz via Af af@afmug.com wrote: Where do you get 'beam forming antenna's for 450 gear? ET Industries..
Re: [AFMUG] favorite/decent dielectric grease?
https://www.tessco.com/products/displayProductInfo.do?sku=383390 You can't really get too much, it just gets messy if you get carried away. Mark Amplex m...@amplex.net On Dec 3, 2014, at 10:15 PM, Forrest Christian (List Account) via Af af@afmug.com wrote: After another round of going through a couple of months of customer returns, and the biggest issues are corrosion related to moisture getting in the connectors, I'm ready to either start shipping a little tube with dielectric grease with certain products, or make larger containers available for sale, or some combination thereof. Before I select a vendor I want to make sure that there isn't a known 'best' brand or even more important - some brand which causes problems. So, for those of you who do this, please let me know what your experiences are in relation to this. In relation, what is everyone's experience as far as the correct amount goes? Thanks. -forrest
Re: [AFMUG] favorite/decent dielectric grease?
That product is good, so is Dow Corning DC4. DC111 which is used as O-ring lubricant on antenna feedtubes is available in ketchup packets, not sure DC4 comes that way. Plus a ketchup packet would only be enough for maybe 2-3 RJ45 jacks. -Original Message- From: Mark Radabaugh via Af Sent: Wednesday, December 03, 2014 9:20 PM To: af@afmug.com Subject: Re: [AFMUG] favorite/decent dielectric grease? https://www.tessco.com/products/displayProductInfo.do?sku=383390 You can't really get too much, it just gets messy if you get carried away. Mark Amplex m...@amplex.net On Dec 3, 2014, at 10:15 PM, Forrest Christian (List Account) via Af af@afmug.com wrote: After another round of going through a couple of months of customer returns, and the biggest issues are corrosion related to moisture getting in the connectors, I'm ready to either start shipping a little tube with dielectric grease with certain products, or make larger containers available for sale, or some combination thereof. Before I select a vendor I want to make sure that there isn't a known 'best' brand or even more important - some brand which causes problems. So, for those of you who do this, please let me know what your experiences are in relation to this. In relation, what is everyone's experience as far as the correct amount goes? Thanks. -forrest
Re: [AFMUG] Cold weather gloves
And yet they are advertised as “exam grade” gloves. And “textured”. I’d hate to get that exam. From: Kade Sullivan via Af Sent: Wednesday, December 03, 2014 3:00 PM To: af@afmug.com Subject: Re: [AFMUG] Cold weather gloves Wow those are 14mm. Very thick. Those would work great. Honestly have never used nitrate gloves that thick. They may actually be tough to take on and off because of the thickness and lack of stretch compared to the lighter gloves. These are what I typically use. http://www.amazon.com/SAS-Safety-66518-Powder-Free-Disposable/dp/B002XXO60M/ref=sr_1_1?s=hiie=UTF8qid=1417640394sr=1-1keywords=SAS+Safety+66518+Raven+Powder-Free+Disposable+Black+Nitrile+6+Mil+Gloves%2C+Large%2C+100+Gloves+by+Weight On Wed, Dec 3, 2014 at 2:42 PM, Josh Luthman via Af af@afmug.com wrote: Like this, Kade? http://www.amazon.com/SAS-Safety-6603-Thickster-Textured/dp/B0002STTW0 Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Dec 3, 2014 at 3:38 PM, Kade Sullivan via Af af@afmug.com wrote: A trick our tower climbers taught me is to wear a pair of the thick latex 5mm+ gloves underneath a set of lighter, tighter stretchy winter gloves. This allows you to retain much more dexterity without sacrificing much warmth. Ever since using this trick, i RARELY get cold fingers. I can typically make a set of the rubber gloves last a couple days of taking them on and off. You can pick up a 500 pack for pretty cheap. They are usually a sweet black or purple color. Very stylish. It goes against everything I've been taught as far as winter clothes and breath-ability, but it actually works. Your hands will be sweaty, but warm. You also will be able to hold bolts and nuts. The other added benefit is that if you have to remove your gloves to do something like put an ethernet end on, you just leave the rubbers on and slip your outter glove off. Your hand doesnt get cold near as fast because it's blocked from the wind somewhat. I have since told a couple friends that work out in the cold all day long doing construction, and they now buy those gloves by the case. On Wed, Dec 3, 2014 at 10:42 AM, Jaime Solorza via Af af@afmug.com wrote: I have used Ironclad for years. For climbing I use the Box Handlers Jaime Solorza On Dec 2, 2014 8:12 PM, Jay Weekley via Af af@afmug.com wrote: Now that we're approaching Winter in the great white North Alabama and Christmas is near I need some good cold weather gloves. Normally, the coldest we work in is the 20's (Fahrenheit) and I really would like to find something that allows me to work with small tools with reasonable dexterity but keep my hands warm. Any suggestions? Am I being unrealistic?
[AFMUG] Web Pages Loading Incomplete
We have a customer who has a managed IP phone system and a managed mikrotik router that we support (but not our Internet service). We are getting intermittent reports of web pages not loading completely. I was on site a couple weeks ago, and was able to duplicate the issue, in particular outlook.com was not loading some images. I determined at that time they were unable to access the IP that google DNS was providing for the host serving those images. When I set our router to use their provider's DNS servers, they were getting a different IP which was pingable and the web page loaded completely. I could not explain why it was working on their providers DNS and not on google DNS (which we use frequently). But we left it on their providers DNS. Today they are reporting a similar issue, supposedly affecting most websites not loading completely. They feel our router is to blame, used to work fine before etc. It's a mikrotik doing NAT to a single public IP, with a few port forwards for remote access to the phone system. Nothing crazy. I do have the office computers running through the port on the grandstream IP phones, but not on a separate VLAN so the phone just acts like a switch. Their provider is not responsive to the issue, other offices in the building using that provider are not having trouble. Any suggestions or thoughts?