[OSL | CCIE_Voice] proctorlabs replication
hi all, I used auto phone register in proctorlabs. When UCM group start with SUB, phone never registered. But when I move PUB to 1st Server in Group, phone registered fine. And I also checked in Cisco CallManager Reporting for DB summary: replication look good 2 and CLI also look good any idea what wrong and what is command to check in this case? tks___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] proctorlabs replication
Did you try to disable csa? On Thu, May 23, 2013 at 8:21 PM, Karen Johnson karen.johnson...@yahoo.cawrote: hi all, I used auto phone register in proctorlabs. When UCM group start with SUB, phone never registered. But when I move PUB to 1st Server in Group, phone registered fine. And I also checked in Cisco CallManager Reporting for DB summary: replication look good 2 and CLI also look good any idea what wrong and what is command to check in this case? tks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] proctorlabs replication
Check DB is replication. Edgar On Thu, May 23, 2013 at 3:21 PM, CCIEing aboaz...@gmail.com wrote: Did you try to disable csa? On Thu, May 23, 2013 at 8:21 PM, Karen Johnson karen.johnson...@yahoo.cawrote: hi all, I used auto phone register in proctorlabs. When UCM group start with SUB, phone never registered. But when I move PUB to 1st Server in Group, phone registered fine. And I also checked in Cisco CallManager Reporting for DB summary: replication look good 2 and CLI also look good any idea what wrong and what is command to check in this case? tks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] proctorlabs replication
u mean show utils service ? From: CCIEing aboaz...@gmail.com To: Karen Johnson karen.johnson...@yahoo.ca Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Thursday, May 23, 2013 1:21:36 PM Subject: Re: [OSL | CCIE_Voice] proctorlabs replication Did you try to disable csa? On Thu, May 23, 2013 at 8:21 PM, Karen Johnson karen.johnson...@yahoo.ca wrote: hi all, I used auto phone register in proctorlabs. When UCM group start with SUB, phone never registered. But when I move PUB to 1st Server in Group, phone registered fine. And I also checked in Cisco CallManager Reporting for DB summary: replication look good 2 and CLI also look good any idea what wrong and what is command to check in this case? tks ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.com/ Are you a CCNP or CCIE and looking for a job? Check out http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] proctorlabs replication
to confirm CSA or Cisco Security Agent you would use the command utils csa status, to disable it you would use utils csa disable On Thu, May 23, 2013 at 3:20 PM, Karen Johnson karen.johnson...@yahoo.cawrote: u mean show utils service ? *From:* CCIEing aboaz...@gmail.com *To:* Karen Johnson karen.johnson...@yahoo.ca *Cc:* ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com *Sent:* Thursday, May 23, 2013 1:21:36 PM *Subject:* Re: [OSL | CCIE_Voice] proctorlabs replication Did you try to disable csa? On Thu, May 23, 2013 at 8:21 PM, Karen Johnson karen.johnson...@yahoo.cawrote: hi all, I used auto phone register in proctorlabs. When UCM group start with SUB, phone never registered. But when I move PUB to 1st Server in Group, phone registered fine. And I also checked in Cisco CallManager Reporting for DB summary: replication look good 2 and CLI also look good any idea what wrong and what is command to check in this case? tks ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.com/ Are you a CCNP or CCIE and looking for a job? Check out http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] proctorlabs replication
When you say ...and CLI also look good... can you be more specific? What command did you use in the CLI to check replication? -Bill -- William Bell, CCIE #38914 blog: http://ucguerrilla.com twitter: @ucguerrilla On May 23, 2013, at 1:21 PM, Karen Johnson wrote: hi all, I used auto phone register in proctorlabs. When UCM group start with SUB, phone never registered. But when I move PUB to 1st Server in Group, phone registered fine. And I also checked in Cisco CallManager Reporting for DB summary: replication look good 2 and CLI also look good any idea what wrong and what is command to check in this case? tks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] proctorlabs replication
cli = util db status gui = Cisco Unified reporting DB replication status Edgar On Thu, May 23, 2013 at 4:20 PM, Karen Johnson karen.johnson...@yahoo.cawrote: u mean show utils service ? *From:* CCIEing aboaz...@gmail.com *To:* Karen Johnson karen.johnson...@yahoo.ca *Cc:* ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com *Sent:* Thursday, May 23, 2013 1:21:36 PM *Subject:* Re: [OSL | CCIE_Voice] proctorlabs replication Did you try to disable csa? On Thu, May 23, 2013 at 8:21 PM, Karen Johnson karen.johnson...@yahoo.cawrote: hi all, I used auto phone register in proctorlabs. When UCM group start with SUB, phone never registered. But when I move PUB to 1st Server in Group, phone registered fine. And I also checked in Cisco CallManager Reporting for DB summary: replication look good 2 and CLI also look good any idea what wrong and what is command to check in this case? tks ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.com/ Are you a CCNP or CCIE and looking for a job? Check out http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Proctorlabs
Anyone else seeing problems connecting to proctorlabs? can't reach the website / VPN and support phone number seems down too... (power issues?) ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Proctorlabs
Web site seems to be up now (4:55 PM Eastern). DQ d...@cisco.com Sent from my iPhone On Jun 18, 2012, at 4:47 PM, Kevin Spicer ke...@kevinspicer.co.uk wrote: Anyone else seeing problems connecting to proctorlabs? can't reach the website / VPN and support phone number seems down too... (power issues?) ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Proctorlabs issues?
Yeah, the were bouncing all morning yesterday and went completely offline just after 3:00 PM EDT yesterday afternoon. They came back around 9:00 PM EDT last night. They¹re all better now. On 5/29/12 7:16 PM, William Affeldt william.affe...@yahoo.com wrote: Anyone else having trouble connecting to proctorlabs.com? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Dan Quinlan Collaboration Engineering PA Territory Cisco Systems, Inc. 323 North Shore Drive Suite 300 Pittsburgh, PA 15212 United States Cisco.com http://www.cisco.com Phone: 412.237.6268 d...@cisco.com Think before you print. This e-mail may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply e-mail and delete all copies of this message. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Proctorlabs issues?
Anyone else having trouble connecting to proctorlabs.com?___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] proctorlabs session
I have a session tomorrow (26th) at 8.00 am , but like to shift it to 27th same time. But racks are full due to Bootcamp these 3 days. If anybody has scheduled for 27th 8.00 am like to shift it to tomorrow (26th) 8.00 please unicast me. Thanks. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Proctorlabs
Ken, All you need to do is let them know you were connected at that time (they can see it in their logs) and they will issue you a voucher. They're cool about it, but don't expect them to go after you to give you the voucher. When you have problems, contact the support immediately. I had all my problems solved and some of my vouchers were given back to me (new voucher, that is), when I was labbing with them. I hope this helps. *Emanuel Damasceno* CCNP Voice On Thu, Mar 8, 2012 at 3:41 AM, Ken Wyan kew...@gmail.com wrote: Yesterday Proctorlabs was down for more than 1 Hour. Earlier they issued vouchers for such session interruptions. This time I didn't receive a voucher. Anybody faced same issue? Ken ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Proctorlabs
I did noticed the same, and today at nearly the same time the same issue again. Contacting support isn't possible right now because the complete proctorlabs.com is not reachable. So you're not alone. -Steven Am 08.03.2012 07:41, schrieb Ken Wyan: Yesterday Proctorlabs was down for more than 1 Hour. Earlier they issued vouchers for such session interruptions. This time I didn't receive a voucher. Anybody faced same issue? Ken ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Proctorlabs Voice sessions and RTP Audio problem
Hi All, I experienced some problems while doing full lab yesterday and I'd like to know if you have any thoughts or ideas. I used XP vm machine for each site with two network cards for each site (NAT), IP Blue softphone (multiple instances), Cisco VPN client but had some problems: - I couldn't register CIPC to Call Manager (manually or auto registeration) - No audio heard (for example) if the call can't go to PSTN - No audio when listening to Voice Mail , couldn't drop message ..etc - Services button didn't work with IP Blue and gives script error - UCCX ICD audio can't be heard I wander if I my setup is correct or I missed something. Waiting for your thoughts. Khaled___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Proctorlabs Voice sessions and RTP Audio problem
I also experience same problems regarding RTP audio. Sometimes IPBlue services softkey doesn't work. But CIPC / softphone registration problems are strange. On Wed, Feb 22, 2012 at 8:48 PM, khaled Saholy khaled_sah...@hotmail.comwrote: Hi All, I experienced some problems while doing full lab yesterday and I'd like to know if you have any thoughts or ideas. I used XP vm machine for each site with two network cards for each site (NAT), IP Blue softphone (multiple instances), Cisco VPN client but had some problems: - I couldn't register CIPC to Call Manager (manually or auto registeration) - No audio heard (for example) if the call can't go to PSTN - No audio when listening to Voice Mail , couldn't drop message ..etc - Services button didn't work with IP Blue and gives script error - UCCX ICD audio can't be heard I wander if I my setup is correct or I missed something. Waiting for your thoughts. Khaled ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Proctorlabs Voice sessions and RTP Audio problem
About these issues, are they happened because of VPN security filters? And will it differ if we connect to the rack via router and hardware phones? Date: Wed, 22 Feb 2012 21:34:25 +0530 Subject: Re: [OSL | CCIE_Voice] Proctorlabs Voice sessions and RTP Audio problem From: kew...@gmail.com To: khaled_sah...@hotmail.com CC: ccie_voice@onlinestudylist.com I also experience same problems regarding RTP audio. Sometimes IPBlue services softkey doesn't work. But CIPC / softphone registration problems are strange. On Wed, Feb 22, 2012 at 8:48 PM, khaled Saholy khaled_sah...@hotmail.com wrote: Hi All, I experienced some problems while doing full lab yesterday and I'd like to know if you have any thoughts or ideas. I used XP vm machine for each site with two network cards for each site (NAT), IP Blue softphone (multiple instances), Cisco VPN client but had some problems: - I couldn't register CIPC to Call Manager (manually or auto registeration) - No audio heard (for example) if the call can't go to PSTN - No audio when listening to Voice Mail , couldn't drop message ..etc - Services button didn't work with IP Blue and gives script error - UCCX ICD audio can't be heard I wander if I my setup is correct or I missed something. Waiting for your thoughts. Khaled ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Proctorlabs down
Anybody doing labs with Proctorlabs now? I was labbing and all of a sudden my connection to it froze... I thought my internet was down, but it is actually there! Anybody experiencing problems? Darn it... *Emanuel Damasceno* ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Proctorlabs down?
Is anyone else having trouble reaching the webpage?___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] PROCTORLABS
Hi, Does proctorlabs provide gradings for IPExpert Workbook volume 2 labs? Ken ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] proctorlabs website ?
Is anyone else having problems with proctor labs right now? Sent from my iPhone On Sep 24, 2011, at 6:27 PM, edgar feliz ejfeli...@yahoo.com wrote: NO I trade this morning for a while and it was not available. EJF From: Rrcrumm rrcr...@yahoo.com To: Ken Wyan kew...@gmail.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Saturday, September 24, 2011 5:28 PM Subject: Re: [OSL | CCIE_Voice] proctorlabs website ? If it is you should send an email to supp...@proctorlabs.com and someone should be able to help you Randall Sent from my iPhone On Sep 24, 2011, at 8:34 AM, Ken Wyan kew...@gmail.com wrote: Today proctorlabs.com website is down ??? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] proctorlabs website ?
I just tried again and can't get to site. EJF From: William Affeldt william.affe...@yahoo.com To: edgar feliz ejfeli...@yahoo.com Cc: Rrcrumm rrcr...@yahoo.com; Ken Wyan kew...@gmail.com; ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Sunday, September 25, 2011 6:48 PM Subject: Re: [OSL | CCIE_Voice] proctorlabs website ? Is anyone else having problems with proctor labs right now? Sent from my iPhone On Sep 24, 2011, at 6:27 PM, edgar feliz ejfeli...@yahoo.com wrote: NO I trade this morning for a while and it was not available. EJF From: Rrcrumm rrcr...@yahoo.com To: Ken Wyan kew...@gmail.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Saturday, September 24, 2011 5:28 PM Subject: Re: [OSL | CCIE_Voice] proctorlabs website ? If it is you should send an email to supp...@proctorlabs.com and someone should be able to help you Randall Sent from my iPhone On Sep 24, 2011, at 8:34 AM, Ken Wyan kew...@gmail.com wrote: Today proctorlabs.com website is down ??? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] proctorlabs website ?
Today proctorlabs.com website is down ??? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] proctorlabs website ?
Seems to be working here On Sat, Sep 24, 2011 at 10:34 AM, Ken Wyan kew...@gmail.com wrote: Today proctorlabs.com website is down ??? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] proctorlabs website ?
If it is you should send an email to supp...@proctorlabs.com and someone should be able to help you Randall Sent from my iPhone On Sep 24, 2011, at 8:34 AM, Ken Wyan kew...@gmail.com wrote: Today proctorlabs.com website is down ??? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] proctorlabs website ?
NO I trade this morning for a while and it was not available. EJF From: Rrcrumm rrcr...@yahoo.com To: Ken Wyan kew...@gmail.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Saturday, September 24, 2011 5:28 PM Subject: Re: [OSL | CCIE_Voice] proctorlabs website ? If it is you should send an email to supp...@proctorlabs.com and someone should be able to help you Randall Sent from my iPhone On Sep 24, 2011, at 8:34 AM, Ken Wyan kew...@gmail.com wrote: Today proctorlabs.com website is down ??? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Proctorlabs SRST ACLs
cool !! thank you i'll try them today 2011/5/28 adam compton com...@gmail.com For any body who needs them, here are some acls I use to test full SRST functionality BR1 access-list 150 deny ip 10.10.201.0 0.0.0.255 any access-list 150 deny ip host 10.10.110.2 any access-list 150 deny ip host 192.168.10.18 any(local phone ip address) access-list 150 permit ip any any HQ: access-list 150 deny ip 10.10.200.0 0.0.0.255 any access-list 150 deny ip host 10.10.110.1 any access-list 150 deny ip host 192.168.10.18 any(local phone ip address) access-list 150 permit ip any any BR2: access-list 150 deny ip 10.10.202.0 0.0.0.255 any access-list 150 deny ip host 10.10.110.3 any access-list 150 deny ip host 192.168.10.18 any(local phone ip address) access-list 150 permit ip any any apply as follows: int fa0/0.30 ip access-group 150 out You will need to bind MGCP to the loopback interface, but that's required half the time anyway. Adam Compton ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Proctorlabs SRST ACLs
For any body who needs them, here are some acls I use to test full SRST functionality BR1 access-list 150 deny ip 10.10.201.0 0.0.0.255 any access-list 150 deny ip host 10.10.110.2 any access-list 150 deny ip host 192.168.10.18 any(local phone ip address) access-list 150 permit ip any any HQ: access-list 150 deny ip 10.10.200.0 0.0.0.255 any access-list 150 deny ip host 10.10.110.1 any access-list 150 deny ip host 192.168.10.18 any(local phone ip address) access-list 150 permit ip any any BR2: access-list 150 deny ip 10.10.202.0 0.0.0.255 any access-list 150 deny ip host 10.10.110.3 any access-list 150 deny ip host 192.168.10.18 any(local phone ip address) access-list 150 permit ip any any apply as follows: int fa0/0.30 ip access-group 150 out You will need to bind MGCP to the loopback interface, but that's required half the time anyway. Adam Compton ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Proctorlabs down ?
nevermind I just needed to reset my vpn thank you 2011/4/3 Cristobal Priego cristobalpri...@gmail.com Hello Do you guys know if proctorlabs.com just went down ? I suddenly lost the connection to all my devices and I can't reach the site any more could you please confirm ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Proctorlabs rack rental
Hi guys, I have the rack rental session from 8AM to 4 PM. I am trying to connect to proctorlabs rack and load initial configs. I keep getting an error on the web page - JRun closed connection. Tried both Chrome and Firefox. Same issue. Wondering if any one else is having the same problem now. Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Proctorlabs rack rental
I'm getting the same error, i thought it was my browser. I've tried in IE and Firefox On 13 March 2011 16:33, Kalyan iyer kparam2...@gmail.com wrote: Hi guys, I have the rack rental session from 8AM to 4 PM. I am trying to connect to proctorlabs rack and load initial configs. I keep getting an error on the web page - JRun closed connection. Tried both Chrome and Firefox. Same issue. Wondering if any one else is having the same problem now. Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Proctorlabs rack rental
I got same issue lost 2h now, and they said their web has issue And suggest me MENU web is complimentary , I should use telnet with empty config, whch is kind of waste time and hard since I can not load config for Server and routers. What u think ? --- On Sun, 3/13/11, Kalyan iyer kparam2...@gmail.com wrote: From: Kalyan iyer kparam2...@gmail.com Subject: [OSL | CCIE_Voice] Proctorlabs rack rental To: ccie_voice@onlinestudylist.com Received: Sunday, March 13, 2011, 9:33 PM Hi guys, I have the rack rental session from 8AM to 4 PM. I am trying to connect to proctorlabs rack and load initial configs. I keep getting an error on the web page - JRun closed connection. Tried both Chrome and Firefox. Same issue. Wondering if any one else is having the same problem now. Thanks -Inline Attachment Follows- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Proctorlabs rack rental
they suggest to use telnet and do config from scratch,however the telnet also not work for some device after cleared --- On Sun, 3/13/11, Kalyan iyer kparam2...@gmail.com wrote: From: Kalyan iyer kparam2...@gmail.com Subject: [OSL | CCIE_Voice] Proctorlabs rack rental To: ccie_voice@onlinestudylist.com Received: Sunday, March 13, 2011, 9:33 PM Hi guys, I have the rack rental session from 8AM to 4 PM. I am trying to connect to proctorlabs rack and load initial configs. I keep getting an error on the web page - JRun closed connection. Tried both Chrome and Firefox. Same issue. Wondering if any one else is having the same problem now. Thanks -Inline Attachment Follows- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Proctorlabs rack rental
I've gotten the same issues devices going off, i put them on and they get back off after a short time. I've already wasted close to 3 hours, so frustrating. On 13 March 2011 17:02, Erwan Erwan e_er...@yahoo.com wrote: I got same issue lost 2h now, and they said their web has issue And suggest me MENU web is complimentary , I should use telnet with empty config, whch is kind of waste time and hard since I can not load config for Server and routers. What u think ? --- On *Sun, 3/13/11, Kalyan iyer kparam2...@gmail.com* wrote: From: Kalyan iyer kparam2...@gmail.com Subject: [OSL | CCIE_Voice] Proctorlabs rack rental To: ccie_voice@onlinestudylist.com Received: Sunday, March 13, 2011, 9:33 PM Hi guys, I have the rack rental session from 8AM to 4 PM. I am trying to connect to proctorlabs rack and load initial configs. I keep getting an error on the web page - JRun closed connection. Tried both Chrome and Firefox. Same issue. Wondering if any one else is having the same problem now. Thanks -Inline Attachment Follows- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] proctorlabs vouchers for sale
Hi all, i have 20 8h proctorlabs.com Lab vouchers to sell. Please send my a mail directly, if you´re interested. Do not need it anymore, got my number yesterday :-) Kind regards Steffen CCIE#28124 (Voice) ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] ProctorLabs slow?
Hi guys, anyone else experiencing very slow response time on the vracks over the past hour? On Thu, Jan 13, 2011 at 8:03 AM, WorkerBee cisco...@gmail.com wrote: Anyone keen? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] proctorlabs vpn connection with ASA 5505
Hi guys, It is possible to use vpn client on the PC and use hardware phones? From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Julien Krieger Sent: Sunday, January 09, 2011 12:55 PM To: Carl Baccus Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] proctorlabs vpn connection with ASA 5505 Hi Carl, I had the same wish to use my ASA 5505 to connect to protorlab's vracks but proctorlab's support told me that they were not supporting it anymore as it wasn't working corretly. They told me to use one of the other available options. Julien 2011/1/9 Carl Baccus cjbac...@gmail.commailto:cjbac...@gmail.com I am currently working on connecting up my ASA at home for the proctorlabs voice vRack. I have read the article posted by Mark Snow, here on this forum: http://www.onlinestudylist.com/archives/ccie_voice/2009-September/010787.html and online elsewhere. I cannot find any actual config for the remaining ASA configuration, and even though I am able to establish a VPN connection to the Vrack, I cannot seem to route correctly to the 10.10.0.0/16http://10.10.0.0/16 address space contains the voice components. This is my configuration so far: ASA Version 7.2(2) ! hostname CarlASA domain-name .net enable password X names ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! passwd ftp mode passive dns server-group DefaultDNS domain-name X.net access-list inside_access_in extended permit ip any any log access-list outside_access_in extended permit ip any any log access-list outside_access_out extended permit ip any any log access-list inside_access_out extended permit ip any any log pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-522.bin no asdm history enable arp timeout 14400 access-group inside_access_in in interface inside access-group inside_access_out out interface inside access-group outside_access_in in interface outside access-group outside_access_out out interface outside route outside 0.0.0.0 0.0.0.0 172.16.3.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute username X password aaa authentication ssh console LOCAL http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto isakmp policy 65535 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh timeout 60 console timeout 0 dhcpd address 192.168.1.10-192.168.1.20 inside dhcpd dns 192.168.1.1 interface inside dhcpd option 3 ip 192.168.1.1 interface inside dhcpd option 150 ip 10.10.210.10 10.10.210.11 interface inside dhcpd enable inside ! vpnclient server 74.126.20.247 vpnclient mode network-extension-mode vpnclient vpngroup vpodgroup password vpnclient username password vpnclient ipsec-over-tcp port 80 vpnclient enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! service-policy global_policy global prompt hostname context I cannot seem to get any kind of route to the inside of the voice vRack though. I am not great at security or switching and routing, any help with this would be great. I will post a full tutorial with pictures once I get it figured out for all others to use! Thanks in advance! --Carl ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.comhttp://www.ipexpert.com * * This Communication is Private Confidential. This message and any attachments may contain information that is privileged and / or confidential and is the property of MHD InfoTech LLC
Re: [OSL | CCIE_Voice] proctorlabs vpn connection with ASA 5505
Nope. At least you need a cisco router to make a vpn connection in order to support hardware phones. -- Dew Swen / sent from mobile device CCVP, CCDP, CCNP-Original Message- From: Naoufal Kerboute Sent: 09/01/2011, 12:02 To: Julien Krieger; Carl Baccus Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] proctorlabs vpn connection with ASA 5505 Hi guys, It is possible to use vpn client on the PC and use hardware phones? From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Julien Krieger Sent: Sunday, January 09, 2011 12:55 PM To: Carl Baccus Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] proctorlabs vpn connection with ASA 5505 Hi Carl, I had the same wish to use my ASA 5505 to connect to protorlab's vracks but proctorlab's support told me that they were not supporting it anymore as it wasn't working corretly. They told me to use one of the other available options. Julien 2011/1/9 Carl Baccus cjbac...@gmail.commailto:cjbac...@gmail.com I am currently working on connecting up my ASA at home for the proctorlabs voice vRack. I have read the article posted by Mark Snow, here on this forum: http://www.onlinestudylist.com/archives/ccie_voice/2009-September/010787.html and online elsewhere. I cannot find any actual config for the remaining ASA configuration, and even though I am able to establish a VPN connection to the Vrack, I cannot seem to route correctly to the 10.10.0.0/16http://10.10.0.0/16 address space contains the voice components. This is my configuration so far: ASA Version 7.2(2) ! hostname CarlASA domain-name .net enable password X names ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! passwd ftp mode passive dns server-group DefaultDNS domain-name X.net access-list inside_access_in extended permit ip any any log access-list outside_access_in extended permit ip any any log access-list outside_access_out extended permit ip any any log access-list inside_access_out extended permit ip any any log pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-522.bin no asdm history enable arp timeout 14400 access-group inside_access_in in interface inside access-group inside_access_out out interface inside access-group outside_access_in in interface outside access-group outside_access_out out interface outside route outside 0.0.0.0 0.0.0.0 172.16.3.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute username X password aaa authentication ssh console LOCAL http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto isakmp policy 65535 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh timeout 60 console timeout 0 dhcpd address 192.168.1.10-192.168.1.20 inside dhcpd dns 192.168.1.1 interface inside dhcpd option 3 ip 192.168.1.1 interface inside dhcpd option 150 ip 10.10.210.10 10.10.210.11 interface inside dhcpd enable inside ! vpnclient server 74.126.20.247 vpnclient mode network-extension-mode vpnclient vpngroup vpodgroup password vpnclient username password vpnclient ipsec-over-tcp port 80 vpnclient enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! service-policy global_policy global prompt hostname context I cannot seem to get any kind of route to the inside of the voice vRack though. I am not great at security or switching and routing, any help with this would be great. I will post a full tutorial with pictures once I get it figured out for all others to use! Thanks in advance! --Carl ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.comhttp://www.ipexpert.com
Re: [OSL | CCIE_Voice] proctorlabs vpn connection with ASA 5505
Is there any other option? I have internet over 3G USB dongle, can I use another router for that other than cisco? -Original Message- From: dew.s...@gmail.com [mailto:dew.s...@gmail.com] Sent: Sunday, January 09, 2011 3:19 PM To: Julien Krieger; Carl Baccus; Naoufal Kerboute Cc: ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] proctorlabs vpn connection with ASA 5505 Nope. At least you need a cisco router to make a vpn connection in order to support hardware phones. -- Dew Swen / sent from mobile device CCVP, CCDP, CCNP-Original Message- From: Naoufal Kerboute Sent: 09/01/2011, 12:02 To: Julien Krieger; Carl Baccus Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] proctorlabs vpn connection with ASA 5505 Hi guys, It is possible to use vpn client on the PC and use hardware phones? From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Julien Krieger Sent: Sunday, January 09, 2011 12:55 PM To: Carl Baccus Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] proctorlabs vpn connection with ASA 5505 Hi Carl, I had the same wish to use my ASA 5505 to connect to protorlab's vracks but proctorlab's support told me that they were not supporting it anymore as it wasn't working corretly. They told me to use one of the other available options. Julien 2011/1/9 Carl Baccus cjbac...@gmail.commailto:cjbac...@gmail.com I am currently working on connecting up my ASA at home for the proctorlabs voice vRack. I have read the article posted by Mark Snow, here on this forum: http://www.onlinestudylist.com/archives/ccie_voice/2009-September/010787.html and online elsewhere. I cannot find any actual config for the remaining ASA configuration, and even though I am able to establish a VPN connection to the Vrack, I cannot seem to route correctly to the 10.10.0.0/16http://10.10.0.0/16 address space contains the voice components. This is my configuration so far: ASA Version 7.2(2) ! hostname CarlASA domain-name .net enable password X names ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! passwd ftp mode passive dns server-group DefaultDNS domain-name X.net access-list inside_access_in extended permit ip any any log access-list outside_access_in extended permit ip any any log access-list outside_access_out extended permit ip any any log access-list inside_access_out extended permit ip any any log pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-522.bin no asdm history enable arp timeout 14400 access-group inside_access_in in interface inside access-group inside_access_out out interface inside access-group outside_access_in in interface outside access-group outside_access_out out interface outside route outside 0.0.0.0 0.0.0.0 172.16.3.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute username X password aaa authentication ssh console LOCAL http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto isakmp policy 65535 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh timeout 60 console timeout 0 dhcpd address 192.168.1.10-192.168.1.20 inside dhcpd dns 192.168.1.1 interface inside dhcpd option 3 ip 192.168.1.1 interface inside dhcpd option 150 ip 10.10.210.10 10.10.210.11 interface inside dhcpd enable inside ! vpnclient server 74.126.20.247 vpnclient mode network-extension-mode vpnclient vpngroup vpodgroup password vpnclient username password vpnclient ipsec-over-tcp port 80 vpnclient enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! service-policy global_policy global prompt hostname context I cannot seem to get any kind of route to the inside of the voice vRack though. I am not great at security
[OSL | CCIE_Voice] proctorlabs vpn connection with ASA 5505
I am currently working on connecting up my ASA at home for the proctorlabs voice vRack. I have read the article posted by Mark Snow, here on this forum: http://www.onlinestudylist.com/archives/ccie_voice/2009-September/010787.html and online elsewhere. I cannot find any actual config for the remaining ASA configuration, and even though I am able to establish a VPN connection to the Vrack, I cannot seem to route correctly to the 10.10.0.0/16 address space contains the voice components. This is my configuration so far: ASA Version 7.2(2) ! hostname CarlASA domain-name .net enable password X names ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! passwd ftp mode passive dns server-group DefaultDNS domain-name X.net access-list inside_access_in extended permit ip any any log access-list outside_access_in extended permit ip any any log access-list outside_access_out extended permit ip any any log access-list inside_access_out extended permit ip any any log pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-522.bin no asdm history enable arp timeout 14400 access-group inside_access_in in interface inside access-group inside_access_out out interface inside access-group outside_access_in in interface outside access-group outside_access_out out interface outside route outside 0.0.0.0 0.0.0.0 172.16.3.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute username X password aaa authentication ssh console LOCAL http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto isakmp policy 65535 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh timeout 60 console timeout 0 dhcpd address 192.168.1.10-192.168.1.20 inside dhcpd dns 192.168.1.1 interface inside dhcpd option 3 ip 192.168.1.1 interface inside dhcpd option 150 ip 10.10.210.10 10.10.210.11 interface inside dhcpd enable inside ! vpnclient server 74.126.20.247 vpnclient mode network-extension-mode vpnclient vpngroup vpodgroup password vpnclient username password vpnclient ipsec-over-tcp port 80 vpnclient enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! service-policy global_policy global prompt hostname context I cannot seem to get any kind of route to the inside of the voice vRack though. I am not great at security or switching and routing, any help with this would be great. I will post a full tutorial with pictures once I get it figured out for all others to use! Thanks in advance! --Carl ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] ProctorLabs Down ??
Hello All, do you know if proctorlabs is down ? I can't access it and i lost connection to my pod thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] ProctorLabs Down ??
We are having an issue with out edge router and we're working on it. Regards, Wayne A. Lawson II - CCIE #5244 (RS) Founder, President CEO - IPexpert, Inc., Proctor Labs, Inc. Platinum Solutions Group, LLC. Mailto: wlaw...@ipexpert.com Telephone: +1.810.334.1564 eFax: +1.810.454.0244 ::Message sent from iPhone IPexpert Proctor Labs are premier providers of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Wireless, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com or www.proctorlabs.com. Platinum Solutions Group (PSG) provides high-end consulting and staffing services with a primary emphasis on Cisco's Data Center, Network Security, Service Provider, Wireless and Unified Communications technologies. Be sure to visit www.platinumsolutionsgroup.com. CCIE-focused job community located at www.platinumplacementservices.com. Connect @ www.WayneLawson.com. On Nov 13, 2010, at 12:40 PM, Cristobal Priego cristobalpri...@gmail.com wrote: Hello All, do you know if proctorlabs is down ? I can't access it and i lost connection to my pod thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] ProctorLabs Down ??
My sessions is down too. On Sat, Nov 13, 2010 at 11:40 AM, Cristobal Priego cristobalpri...@gmail.com wrote: Hello All, do you know if proctorlabs is down ? I can't access it and i lost connection to my pod thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Proctorlabs website down ?
I was in the middle of my lab and can't do anything on the proctorlab website i wanted to load a final config and couldn't do so can you guys access proctorlabs ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Proctorlabs Down?
Even I got logged out :( Mann ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Proctorlabs Down?
or is it just me? mike ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Proctorlabs Down?
It's back up for me... Date: Thu, 9 Sep 2010 11:04:15 -0500 From: groganhoc...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Proctorlabs Down? or is it just me? mike ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] ProctorLabs IPCC license file location?
Unfortunately, none of my servers was being reloaded when I requested a reload. :( On Sat, Aug 28, 2010 at 8:48 AM, Ohamien Uhakheme oham...@gmail.com wrote: Email support and they will mail you the file, or you can load Vol 2 Lab 1, and it should be on the root of C: Ohamien On Fri, Aug 27, 2010 at 9:01 PM, groganhockey groganhoc...@gmail.comwrote: Am I missing it? I don't see it on the IPCC server? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Proctorlabs not resolving
Hello, I would have to agree that not being able to load the servers especially is an issue. To work the voice labs you must have the servers available and configured properly for the lab. While we could use the downloaded configurations for the routers/switch, we can not do so for the servers. Also, just having the servers on does not allow us to remotely load the server configurations as those backups/configs are not supplied in the Proctor Labs voice section. Perhaps as a backup Proctor Labs can provide instructions to power on the servers remotely without the web page, how to get and load the configurations for the servers and at that point it could be a solutions that we could use to work our voice labs. Bill ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Proctorlabs not resolving
Bill, Unfortunately the servers are the number one issue for voice customers that we can't provide a good solution to in the event these problems happen again. To provide what you are suggesting below we would have to give administrative access to the VMware servers. I will give you the honest answer as to why would never do it. At least 1 or 2 times a month someone deletes the flash on the routers/switches in the pod. This is annoying but manageable as the files are small and we can simply upload them via the USB interface or xmodem them on the switches. recovering a server after someone makes an accidental mistake is not so easily achieved. And it is easy enough to wipe out a datastore with intended or unintended actions. The datastore per server is 1.5 TB. Not as easy/quick of a problem to resolve. Regards, Tyson Scott - CCIE #13513 RS, Security, and SP Managing Partner / Sr. Instructor - IPexpert, Inc. Mailto: tsc...@ipexpert.com Telephone: +1.810.326.1444, ext. 208 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Bill Lake Sent: Sunday, August 29, 2010 9:15 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Proctorlabs not resolving Hello, I would have to agree that not being able to load the servers especially is an issue. To work the voice labs you must have the servers available and configured properly for the lab. While we could use the downloaded configurations for the routers/switch, we can not do so for the servers. Also, just having the servers on does not allow us to remotely load the server configurations as those backups/configs are not supplied in the Proctor Labs voice section. Perhaps as a backup Proctor Labs can provide instructions to power on the servers remotely without the web page, how to get and load the configurations for the servers and at that point it could be a solutions that we could use to work our voice labs. Bill ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Proctorlabs not resolving
Tyson, I had my first session on PL on Friday night, and this was one of the issues that I ran into. I could not get the servers to reload no matter what I tried (it seemed). I had another session scheduled for this morning, but cancelled it as a result of the frustrating session I had on Friday. Lucky for me, I have a pretty good home lab, so I can do quite a bit of testing and scenarios on my own equipment, at my leisure. My lab is a mix of current and previous generation(s) of equipment, however, so I can't simply copy and paste the IOS configs into my own gear. There are two reasons that I chose to purchase PL rack time: 1. Convenience of loading the various IPExpert scenarios. 2. Access to a full lab of the actual equipment. What are your recommendations in the short term in the event that the servers will not reload? Thanks, mike On Sun, Aug 29, 2010 at 9:34 PM, Tyson Scott tsc...@ipexpert.com wrote: Bill, Unfortunately the servers are the number one issue for voice customers that we can't provide a good solution to in the event these problems happen again. To provide what you are suggesting below we would have to give administrative access to the VMware servers. I will give you the honest answer as to why would never do it. At least 1 or 2 times a month someone deletes the flash on the routers/switches in the pod. This is annoying but manageable as the files are small and we can simply upload them via the USB interface or xmodem them on the switches. recovering a server after someone makes an accidental mistake is not so easily achieved. And it is easy enough to wipe out a datastore with intended or unintended actions. The datastore per server is 1.5 TB. Not as easy/quick of a problem to resolve. Regards, Tyson Scott - CCIE #13513 RS, Security, and SP Managing Partner / Sr. Instructor - IPexpert, Inc. Mailto: tsc...@ipexpert.com Telephone: +1.810.326.1444, ext. 208 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Bill Lake Sent: Sunday, August 29, 2010 9:15 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Proctorlabs not resolving Hello, I would have to agree that not being able to load the servers especially is an issue. To work the voice labs you must have the servers available and configured properly for the lab. While we could use the downloaded configurations for the routers/switch, we can not do so for the servers. Also, just having the servers on does not allow us to remotely load the server configurations as those backups/configs are not supplied in the Proctor Labs voice section. Perhaps as a backup Proctor Labs can provide instructions to power on the servers remotely without the web page, how to get and load the configurations for the servers and at that point it could be a solutions that we could use to work our voice labs. Bill ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Proctorlabs not resolving
Grogan, I believe that issue to be resolved at this time. A couple people this weekend contacted the afterhours support to have them manually revert the racks for them. that is a last resort option that can be provided if all else fails. Again I am sorry that you experienced issues this weekend and we are doing what we can to make it an even better experience. Regards, Tyson Scott - CCIE #13513 RS, Security, and SP Managing Partner / Sr. Instructor - IPexpert, Inc. Mailto: mailto:tsc...@ipexpert.com tsc...@ipexpert.com Telephone: +1.810.326.1444, ext. 208 Live Assistance, Please visit: http://www.ipexpert.com/chat www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at http://www.ipexpert.com/communities www.ipexpert.com/communities and our public website at http://www.ipexpert.com/ www.ipexpert.com From: groganhockey [mailto:groganhoc...@gmail.com] Sent: Monday, August 30, 2010 12:28 AM To: Tyson Scott Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Proctorlabs not resolving Tyson, I had my first session on PL on Friday night, and this was one of the issues that I ran into. I could not get the servers to reload no matter what I tried (it seemed). I had another session scheduled for this morning, but cancelled it as a result of the frustrating session I had on Friday. Lucky for me, I have a pretty good home lab, so I can do quite a bit of testing and scenarios on my own equipment, at my leisure. My lab is a mix of current and previous generation(s) of equipment, however, so I can't simply copy and paste the IOS configs into my own gear. There are two reasons that I chose to purchase PL rack time: 1. Convenience of loading the various IPExpert scenarios. 2. Access to a full lab of the actual equipment. What are your recommendations in the short term in the event that the servers will not reload? Thanks, mike On Sun, Aug 29, 2010 at 9:34 PM, Tyson Scott tsc...@ipexpert.com wrote: Bill, Unfortunately the servers are the number one issue for voice customers that we can't provide a good solution to in the event these problems happen again. To provide what you are suggesting below we would have to give administrative access to the VMware servers. I will give you the honest answer as to why would never do it. At least 1 or 2 times a month someone deletes the flash on the routers/switches in the pod. This is annoying but manageable as the files are small and we can simply upload them via the USB interface or xmodem them on the switches. recovering a server after someone makes an accidental mistake is not so easily achieved. And it is easy enough to wipe out a datastore with intended or unintended actions. The datastore per server is 1.5 TB. Not as easy/quick of a problem to resolve. Regards, Tyson Scott - CCIE #13513 RS, Security, and SP Managing Partner / Sr. Instructor - IPexpert, Inc. Mailto: tsc...@ipexpert.com Telephone: +1.810.326.1444, ext. 208 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Bill Lake Sent: Sunday, August 29, 2010 9:15 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Proctorlabs not resolving Hello, I would have to agree that not being able to load the servers especially is an issue. To work the voice labs you must have the servers available and configured properly for the lab. While we could use the downloaded configurations for the routers/switch, we can not do so for the servers. Also, just having the servers on does not allow us to remotely load the server configurations as those backups/configs are not supplied in the Proctor Labs voice section. Perhaps as a backup Proctor Labs can provide instructions to power on the servers remotely without the web page, how to get and load the configurations for the servers and at that point it could be a solutions that we could use to work our voice labs. Bill ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more
Re: [OSL | CCIE_Voice] ProctorLabs IPCC license file location?
Email support and they will mail you the file, or you can load Vol 2 Lab 1, and it should be on the root of C: Ohamien On Fri, Aug 27, 2010 at 9:01 PM, groganhockey groganhoc...@gmail.comwrote: Am I missing it? I don't see it on the IPCC server? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] ProctorLabs IPCC license file location?
Am I missing it? I don't see it on the IPCC server? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] proctorlabs down?
Is proctorlabs.com down again? I can't get to it. I also can't do a remote DNS lookup on it. I am able to vpn in, but can't access the config webpage to start my lab or open a ticket for that matter. Brian ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] proctorlabs down?
got same problem... and this is my last proctorlab before the cisco lab... grr cheers, Bernhard Von: ccie_voice-boun...@onlinestudylist.com im Auftrag von Brian Valentine Gesendet: Sa 14.08.2010 14:27 An: OSL Group; supp...@proctorlabs.com Betreff: [OSL | CCIE_Voice] proctorlabs down? Is proctorlabs.com down again? I can't get to it. I also can't do a remote DNS lookup on it. I am able to vpn in, but can't access the config webpage to start my lab or open a ticket for that matter. Brian ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Proctorlabs UCCX Image - Pre Integration ?
It seems that every version of the UCCX-PUB I load in proctorlabs, already has an existing configuration. Which lab to I have to load for just the UCCX server so I can practice the integration portion ? Thanks, Mike ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Proctorlabs seems to have gone down
Hey All, Is anyone else having trouble with Proctorlabs? My session just dropped out and I can't contact the website to seek assistance or connect via VPN. Roger ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Proctorlabs seems to have gone down
Yeah, same here Roger. On Wed, May 5, 2010 at 8:40 PM, Roger Henderson rhender...@gmail.comwrote: Hey All, Is anyone else having trouble with Proctorlabs? My session just dropped out and I can't contact the website to seek assistance or connect via VPN. Roger ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Proctorlabs seems to have gone down
It's back up now - my connectivity was only down for 2 minutes. Thanks for the heads up about the DNS - that shouldn't have impacted the VPN connection though - it is all done by IP... Roger On Thu, May 6, 2010 at 1:57 PM, Mad Kiwi ccievoi...@gmail.com wrote: Hi guys, Check that you can resolve the website to it's DNS name, there were DNS changes worldwide on the 5th of May which maybe impacting your connections. I'm able to connect from Australia to their site. Cheers, On Thu, May 6, 2010 at 1:45 PM, vccie2010 vccie2...@gmail.com wrote: Yeah, same here Roger. On Wed, May 5, 2010 at 8:40 PM, Roger Henderson rhender...@gmail.comwrote: Hey All, Is anyone else having trouble with Proctorlabs? My session just dropped out and I can't contact the website to seek assistance or connect via VPN. Roger ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- Cheers, kiwi ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Proctorlabs seems to have gone down
OK, now Proctorlabs.com is unreachable. Again. It's been going up and down for any hour or so, but seems down now. And yes, I flushed my DNS cache ;) On Thu, May 6, 2010 at 2:11 PM, Roger Henderson rhender...@gmail.comwrote: It's back up now - my connectivity was only down for 2 minutes. Thanks for the heads up about the DNS - that shouldn't have impacted the VPN connection though - it is all done by IP... Roger On Thu, May 6, 2010 at 1:57 PM, Mad Kiwi ccievoi...@gmail.com wrote: Hi guys, Check that you can resolve the website to it's DNS name, there were DNS changes worldwide on the 5th of May which maybe impacting your connections. I'm able to connect from Australia to their site. Cheers, On Thu, May 6, 2010 at 1:45 PM, vccie2010 vccie2...@gmail.com wrote: Yeah, same here Roger. On Wed, May 5, 2010 at 8:40 PM, Roger Henderson rhender...@gmail.comwrote: Hey All, Is anyone else having trouble with Proctorlabs? My session just dropped out and I can't contact the website to seek assistance or connect via VPN. Roger ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- Cheers, kiwi ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Proctorlabs PSTN Router As A GK
Yes it does esp lab 5c On 3/13/10, scott carruthers scarruthe...@hotmail.com wrote: In some CCIE V2 labs Proctorlabs PSTN router was configured as GK so that we could practice remote zone scenarios. I have not reviewed all of the new lab IP Expert labs - do any call for sending calls thru our own HQ GK to a remote zone outside of our direct control? Do any of the Proctorlabs pre-configs configure the PSTN router as a GK? Thanks Scott _ Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox. http://www.windowslive.com/campaign/thenewbusy?ocid=PID27925::T:WLMTAGL:ON:WL:en-US:WM_HMP:032010_1 -- Sent from my mobile device www.ccietalk.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Proctorlabs PSTN Router As A GK
Is the lab you are referring to - lab 5C - in CCIE Voice Workbook V6.0 Volume 1? When I download the section labeled Workbook 5A, 5b, and 5C - the PDF actually only contains 5A and 5B - I do not find a lab 5C - and thus I find no PSTN GK scenarios. Am I going to the correct section? Thanks Scott Date: Sun, 14 Mar 2010 11:17:56 -0500 Subject: Re: [OSL | CCIE_Voice] Proctorlabs PSTN Router As A GK From: cciet...@gmail.com To: scarruthe...@hotmail.com; ccie_voice@onlinestudylist.com Yes it does esp lab 5c On 3/13/10, scott carruthers scarruthe...@hotmail.com wrote: In some CCIE V2 labs Proctorlabs PSTN router was configured as GK so that we could practice remote zone scenarios. I have not reviewed all of the new lab IP Expert labs - do any call for sending calls thru our own HQ GK to a remote zone outside of our direct control? Do any of the Proctorlabs pre-configs configure the PSTN router as a GK? Thanks Scott _ Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox. http://www.windowslive.com/campaign/thenewbusy?ocid=PID27925::T:WLMTAGL:ON:WL:en-US:WM_HMP:032010_1 -- Sent from my mobile device www.ccietalk.com _ Hotmail: Trusted email with powerful SPAM protection. http://clk.atdmt.com/GBL/go/210850553/direct/01/___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Proctorlabs PSTN Router As A GK
I am not near my computer but it says V3 On 3/14/10, scott carruthers scarruthe...@hotmail.com wrote: Is the lab you are referring to - lab 5C - in CCIE Voice Workbook V6.0 Volume 1? When I download the section labeled Workbook 5A, 5b, and 5C - the PDF actually only contains 5A and 5B - I do not find a lab 5C - and thus I find no PSTN GK scenarios. Am I going to the correct section? Thanks Scott Date: Sun, 14 Mar 2010 11:17:56 -0500 Subject: Re: [OSL | CCIE_Voice] Proctorlabs PSTN Router As A GK From: cciet...@gmail.com To: scarruthe...@hotmail.com; ccie_voice@onlinestudylist.com Yes it does esp lab 5c On 3/13/10, scott carruthers scarruthe...@hotmail.com wrote: In some CCIE V2 labs Proctorlabs PSTN router was configured as GK so that we could practice remote zone scenarios. I have not reviewed all of the new lab IP Expert labs - do any call for sending calls thru our own HQ GK to a remote zone outside of our direct control? Do any of the Proctorlabs pre-configs configure the PSTN router as a GK? Thanks Scott _ Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox. http://www.windowslive.com/campaign/thenewbusy?ocid=PID27925::T:WLMTAGL:ON:WL:en-US:WM_HMP:032010_1 -- Sent from my mobile device www.ccietalk.com _ Hotmail: Trusted email with powerful SPAM protection. http://clk.atdmt.com/GBL/go/210850553/direct/01/ -- Sent from my mobile device www.ccietalk.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Proctorlabs PSTN Router As A GK
In some CCIE V2 labs Proctorlabs PSTN router was configured as GK so that we could practice remote zone scenarios. I have not reviewed all of the new lab IP Expert labs - do any call for sending calls thru our own HQ GK to a remote zone outside of our direct control? Do any of the Proctorlabs pre-configs configure the PSTN router as a GK? Thanks Scott _ Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox. http://www.windowslive.com/campaign/thenewbusy?ocid=PID27925::T:WLMTAGL:ON:WL:en-US:WM_HMP:032010_1___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues
Thanks Mike. I will email proctorlabs support and let you know what I get for a response. Has anyone else encountered similiar issues and been able to get resolution? As I said - I thought that proctorlabs/IP Expert were aware of Easy VPN issues but thought the problems were now rectified. From Mike's and my own experience it seems like problems that appears to be phone type centric remain. Thanks Scott Date: Sun, 7 Feb 2010 18:05:47 -0500 Subject: Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues From: 2xcci...@gmail.com To: scarruthe...@hotmail.com; ccie_voice@onlinestudylist.com CC: 2xcci...@gmail.com Hey Scott, Yes, I have been having the same type of problems. The 7960s usually appear to work fine. If I use a 7961 or 7971 for whatever reason they have issues. For instance in some cases I can't call from hq to br1. The phones will ring, but when I pick, there is no audio. Even though there is no audio if you leave the phone off the hook eventually the call drops. In some cases when calling the PSTN the phones will reset when I pickup or try to put on hold the 7961/71s will state that CM is down. Or like you said, you will pick up the PSTN phone and the 7961 phone does not acknowledge that the phone has been picked up. It is a pain. I thought it was just me. When studying on the voice version 2 pods I did not have any issues, but I was not using 7971s or 7961s. Not sure if that makes a difference. Thanks, Mike On Sun, Feb 7, 2010 at 4:32 PM, scott carruthers scarruthe...@hotmail.com wrote: I haven't used a Proctorlabs session in a few weeks. In the past I had issues with the V3 easy VPN tunnels when using hardware phones. I believe there were updates sent out stating that many people were experiencing problems with the easy VPN solution but that the problems were not rectified. Are others having continued problems? Issues include: -Several phones in my lab register without issue, show line appearances, will go hook and receive dial tone, can dial PSTN numbers, but the call will not cut thru to two way audio - the phone will continue ringing after I attempt to pick it up on the PSTN phone. -This is not a GW, etc issue - some phones are fine - others are not - indentical configs and calling from same sites. -Not sure if this related to phone model by my lone 7960 is fine but 7970s experience issues. Thanks Scott Hotmail: Powerful Free email with security by Microsoft. Get it now. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _ Hotmail: Trusted email with powerful SPAM protection. http://clk.atdmt.com/GBL/go/201469227/direct/01/___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues
Did you guys add the following to your configuration? interface Loopback0 ip address 10.10.100.15 255.255.255.255 ! interface Virtual-Template1 type tunnel ip unnumbered Loopback0 ! crypto ipsec client ezvpn IPx-Voice-vRack mode network-plus virtual-interface 1 Regards, Tyson Scott - CCIE #13513 RS, Security, and SP Technical Instructor - IPexpert, Inc. Mailto: mailto:tsc...@ipexpert.com tsc...@ipexpert.com Telephone: +1.810.326.1444, ext. 208 Live Assistance, Please visit: http://www.ipexpert.com/chat www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (RS, Voice Security), CCNP, CCVP, CCSP and CCIE (RS, Voice, Security Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at http://www.ipexpert.com/communities www.ipexpert.com/communities and our public website at http://www.ipexpert.com www.ipexpert.com From: Wayne Lawson [mailto:wlaw...@ipexpert.com] Sent: Monday, February 08, 2010 8:37 AM To: Drew LePla; Tyson Scott; Vik Malhi Cc: Wayne A. Lawson II Subject: Fwd: [OSL | CCIE_Voice] Proctorlabs VPN Issues Guys - I'd like to get together with all 3 of you. It appears that PLI problems are continuing and we need to get this figured out. Regards, Wayne A. Lawson II - CCIE #5244 Founder President - IPexpert Mailto: wlaw...@ipexpert.com Telephone: +1.810.326.1444, ext. 101 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 ::Message sent from iPhone:: IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (RS, Voice Security), CCNP, CCVP, CCSP and CCIE (RS, Voice, Security Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com. Begin forwarded message: From: scott carruthers scarruthe...@hotmail.com Date: February 8, 2010 6:52:23 AM EST To: 2xcci...@gmail.com, ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues Thanks Mike. I will email proctorlabs support and let you know what I get for a response. Has anyone else encountered similiar issues and been able to get resolution? As I said - I thought that proctorlabs/IP Expert were aware of Easy VPN issues but thought the problems were now rectified. From Mike's and my own experience it seems like problems that appears to be phone type centric remain. Thanks Scott _ Date: Sun, 7 Feb 2010 18:05:47 -0500 Subject: Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues From: 2xcci...@gmail.com To: scarruthe...@hotmail.com; ccie_voice@onlinestudylist.com CC: 2xcci...@gmail.com Hey Scott, Yes, I have been having the same type of problems. The 7960s usually appear to work fine. If I use a 7961 or 7971 for whatever reason they have issues. For instance in some cases I can't call from hq to br1. The phones will ring, but when I pick, there is no audio. Even though there is no audio if you leave the phone off the hook eventually the call drops. In some cases when calling the PSTN the phones will reset when I pickup or try to put on hold the 7961/71s will state that CM is down. Or like you said, you will pick up the PSTN phone and the 7961 phone does not acknowledge that the phone has been picked up. It is a pain. I thought it was just me. When studying on the voice version 2 pods I did not have any issues, but I was not using 7971s or 7961s. Not sure if that makes a difference. Thanks, Mike On Sun, Feb 7, 2010 at 4:32 PM, scott carruthers scarruthe...@hotmail.com wrote: I haven't used a Proctorlabs session in a few weeks. In the past I had issues with the V3 easy VPN tunnels when using hardware phones. I believe there were updates sent out stating that many people were experiencing problems with the easy VPN solution but that the problems were not rectified. Are others having continued problems? Issues include: -Several phones in my lab register without issue, show line appearances, will go hook and receive dial tone, can dial PSTN numbers, but the call will not cut thru to two way audio - the phone will continue ringing after I attempt to pick it up on the PSTN phone. -This is not a GW, etc issue - some phones are fine - others are not - indentical configs and calling from same sites. -Not sure if this related to phone model by my lone 7960 is fine but 7970s experience issues. Thanks Scott _ Hotmail: Powerful Free email with security by Microsoft. Get it now. http://clk.atdmt.com/GBL/go/201469230/direct/01/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _ Hotmail: Trusted email with powerful SPAM protection. Sign up http
Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues
I did not - I may have missed a note in these regards if one was sent out. Unfortunately I have been limping along (never had issues in V2) with less than recommended IOS due to hardware constraints. If I enter interface virtual-template1 I do not have a type tunnel option in the current IOS. What version is needed for this? May need to break down and finally get to recommended hardware/software versions if this has been known to cure such issues. Thanks Scott From: tsc...@ipexpert.com To: scarruthe...@hotmail.com; 2xcci...@gmail.com; 2xcci...@gmail.com; ccie_voice@onlinestudylist.com CC: wlaw...@ipexpert.com; dle...@ipexpert.com; vma...@ipexpert.com Subject: RE: [OSL | CCIE_Voice] Proctorlabs VPN Issues Date: Mon, 8 Feb 2010 11:00:38 -0500 Did you guys add the following to your configuration? interface Loopback0 ip address 10.10.100.15 255.255.255.255 ! interface Virtual-Template1 type tunnel ip unnumbered Loopback0 ! crypto ipsec client ezvpn IPx-Voice-vRack mode network-plus virtual-interface 1 Regards, Tyson Scott - CCIE #13513 RS, Security, and SP Technical Instructor - IPexpert, Inc. Mailto: tsc...@ipexpert.com Telephone: +1.810.326.1444, ext. 208 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (RS, Voice Security), CCNP, CCVP, CCSP and CCIE (RS, Voice, Security Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com From: Wayne Lawson [mailto:wlaw...@ipexpert.com] Sent: Monday, February 08, 2010 8:37 AM To: Drew LePla; Tyson Scott; Vik Malhi Cc: Wayne A. Lawson II Subject: Fwd: [OSL | CCIE_Voice] Proctorlabs VPN Issues Guys - I'd like to get together with all 3 of you. It appears that PLI problems are continuing and we need to get this figured out. Regards, Wayne A. Lawson II - CCIE #5244 Founder President - IPexpert Mailto: wlaw...@ipexpert.com Telephone: +1.810.326.1444, ext. 101 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 ::Message sent from iPhone:: IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (RS, Voice Security), CCNP, CCVP, CCSP and CCIE (RS, Voice, Security Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com. Begin forwarded message: From: scott carruthers scarruthe...@hotmail.com Date: February 8, 2010 6:52:23 AM EST To: 2xcci...@gmail.com, ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues Thanks Mike. I will email proctorlabs support and let you know what I get for a response. Has anyone else encountered similiar issues and been able to get resolution? As I said - I thought that proctorlabs/IP Expert were aware of Easy VPN issues but thought the problems were now rectified. From Mike's and my own experience it seems like problems that appears to be phone type centric remain. Thanks Scott Date: Sun, 7 Feb 2010 18:05:47 -0500 Subject: Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues From: 2xcci...@gmail.com To: scarruthe...@hotmail.com; ccie_voice@onlinestudylist.com CC: 2xcci...@gmail.com Hey Scott, Yes, I have been having the same type of problems. The 7960s usually appear to work fine. If I use a 7961 or 7971 for whatever reason they have issues. For instance in some cases I can't call from hq to br1. The phones will ring, but when I pick, there is no audio. Even though there is no audio if you leave the phone off the hook eventually the call drops. In some cases when calling the PSTN the phones will reset when I pickup or try to put on hold the 7961/71s will state that CM is down. Or like you said, you will pick up the PSTN phone and the 7961 phone does not acknowledge that the phone has been picked up. It is a pain. I thought it was just me. When studying on the voice version 2 pods I did not have any issues, but I was not using 7971s or 7961s. Not sure if that makes a difference. Thanks, Mike On Sun, Feb 7, 2010 at 4:32 PM, scott carruthers scarruthe...@hotmail.com wrote: I haven't used a Proctorlabs session in a few weeks. In the past I had issues with the V3 easy VPN tunnels when using hardware phones. I believe there were updates sent out stating that many people were experiencing problems with the easy VPN solution but that the problems were not rectified. Are others having continued problems? Issues include: -Several phones in my lab register without issue, show line appearances, will go hook and receive dial tone, can dial PSTN numbers, but the call will not cut thru to two way audio - the phone
Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues
Scott, You have to run IOS 12.4T. So we implemented some fVRF configuration at proctorlabs to make pod to pod transition for students easier. (Which in the future will allow you guys to save and load configurations if we finish working out the logistics of that). With this change though our EZVPN implementation has moved to phase 8 and it seems thru more testing that the workaround below is required on the client end to match with the features we have implemented. If you have a router that can run at least 12.4(15)T then you don't have to change it out. I am using an 831 at home and it works great so you don't have to have the latest and greatest by any means. I would be happy to work with you on this if you would like to setup a time to do testing. Regards, Tyson Scott - CCIE #13513 RS, Security, and SP Technical Instructor - IPexpert, Inc. Mailto: mailto:tsc...@ipexpert.com tsc...@ipexpert.com Telephone: +1.810.326.1444, ext. 208 Live Assistance, Please visit: http://www.ipexpert.com/chat www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (RS, Voice Security), CCNP, CCVP, CCSP and CCIE (RS, Voice, Security Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at http://www.ipexpert.com/communities www.ipexpert.com/communities and our public website at http://www.ipexpert.com www.ipexpert.com From: scott carruthers [mailto:scarruthe...@hotmail.com] Sent: Monday, February 08, 2010 11:16 AM To: tsc...@ipexpert.com; 2xcci...@gmail.com; ccie_voice@onlinestudylist.com Cc: wlaw...@ipexpert.com; dle...@ipexpert.com; vik mahli Subject: RE: [OSL | CCIE_Voice] Proctorlabs VPN Issues I did not - I may have missed a note in these regards if one was sent out. Unfortunately I have been limping along (never had issues in V2) with less than recommended IOS due to hardware constraints. If I enter interface virtual-template1 I do not have a type tunnel option in the current IOS. What version is needed for this? May need to break down and finally get to recommended hardware/software versions if this has been known to cure such issues. Thanks Scott _ From: tsc...@ipexpert.com To: scarruthe...@hotmail.com; 2xcci...@gmail.com; 2xcci...@gmail.com; ccie_voice@onlinestudylist.com CC: wlaw...@ipexpert.com; dle...@ipexpert.com; vma...@ipexpert.com Subject: RE: [OSL | CCIE_Voice] Proctorlabs VPN Issues Date: Mon, 8 Feb 2010 11:00:38 -0500 Did you guys add the following to your configuration? interface Loopback0 ip address 10.10.100.15 255.255.255.255 ! interface Virtual-Template1 type tunnel ip unnumbered Loopback0 ! crypto ipsec client ezvpn IPx-Voice-vRack mode network-plus virtual-interface 1 Regards, Tyson Scott - CCIE #13513 RS, Security, and SP Technical Instructor - IPexpert, Inc. Mailto: tsc...@ipexpert.com Telephone: +1.810.326.1444, ext. 208 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (RS, Voice Security), CCNP, CCVP, CCSP and CCIE (RS, Voice, Security Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com From: Wayne Lawson [mailto:wlaw...@ipexpert.com] Sent: Monday, February 08, 2010 8:37 AM To: Drew LePla; Tyson Scott; Vik Malhi Cc: Wayne A. Lawson II Subject: Fwd: [OSL | CCIE_Voice] Proctorlabs VPN Issues Guys - I'd like to get together with all 3 of you. It appears that PLI problems are continuing and we need to get this figured out. Regards, Wayne A. Lawson II - CCIE #5244 Founder President - IPexpert Mailto: wlaw...@ipexpert.com Telephone: +1.810.326.1444, ext. 101 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 ::Message sent from iPhone:: IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (RS, Voice Security), CCNP, CCVP, CCSP and CCIE (RS, Voice, Security Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com. Begin forwarded message: From: scott carruthers scarruthe...@hotmail.com Date: February 8, 2010 6:52:23 AM EST To: 2xcci...@gmail.com, ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues Thanks Mike. I will email proctorlabs support and let you know what I get for a response. Has anyone else encountered similiar issues and been able to get resolution? As I said - I thought that proctorlabs/IP Expert were aware of Easy VPN issues but thought the problems were now rectified. From Mike's and my
Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues
Thanks Tyson - I will replace my 2621 which I cannot get 12.4.15 on and with a 831. I will let you know if I have continued problems after this is completed. Scott From: tsc...@ipexpert.com To: scarruthe...@hotmail.com; 2xcci...@gmail.com; ccie_voice@onlinestudylist.com CC: wlaw...@ipexpert.com; dle...@ipexpert.com; vma...@ipexpert.com Subject: RE: [OSL | CCIE_Voice] Proctorlabs VPN Issues Date: Mon, 8 Feb 2010 11:33:20 -0500 Scott, You have to run IOS 12.4T. So we implemented some fVRF configuration at proctorlabs to make pod to pod transition for students easier. (Which in the future will allow you guys to save and load configurations if we finish working out the logistics of that). With this change though our EZVPN implementation has moved to phase 8 and it seems thru more testing that the workaround below is required on the client end to match with the features we have implemented. If you have a router that can run at least 12.4(15)T then you don't have to change it out. I am using an 831 at home and it works great so you don't have to have the latest and greatest by any means. I would be happy to work with you on this if you would like to setup a time to do testing. Regards, Tyson Scott - CCIE #13513 RS, Security, and SP Technical Instructor - IPexpert, Inc. Mailto: tsc...@ipexpert.com Telephone: +1.810.326.1444, ext. 208 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (RS, Voice Security), CCNP, CCVP, CCSP and CCIE (RS, Voice, Security Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com From: scott carruthers [mailto:scarruthe...@hotmail.com] Sent: Monday, February 08, 2010 11:16 AM To: tsc...@ipexpert.com; 2xcci...@gmail.com; ccie_voice@onlinestudylist.com Cc: wlaw...@ipexpert.com; dle...@ipexpert.com; vik mahli Subject: RE: [OSL | CCIE_Voice] Proctorlabs VPN Issues I did not - I may have missed a note in these regards if one was sent out. Unfortunately I have been limping along (never had issues in V2) with less than recommended IOS due to hardware constraints. If I enter interface virtual-template1 I do not have a type tunnel option in the current IOS. What version is needed for this? May need to break down and finally get to recommended hardware/software versions if this has been known to cure such issues. Thanks Scott From: tsc...@ipexpert.com To: scarruthe...@hotmail.com; 2xcci...@gmail.com; 2xcci...@gmail.com; ccie_voice@onlinestudylist.com CC: wlaw...@ipexpert.com; dle...@ipexpert.com; vma...@ipexpert.com Subject: RE: [OSL | CCIE_Voice] Proctorlabs VPN Issues Date: Mon, 8 Feb 2010 11:00:38 -0500 Did you guys add the following to your configuration? interface Loopback0 ip address 10.10.100.15 255.255.255.255 ! interface Virtual-Template1 type tunnel ip unnumbered Loopback0 ! crypto ipsec client ezvpn IPx-Voice-vRack mode network-plus virtual-interface 1 Regards, Tyson Scott - CCIE #13513 RS, Security, and SP Technical Instructor - IPexpert, Inc. Mailto: tsc...@ipexpert.com Telephone: +1.810.326.1444, ext. 208 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (RS, Voice Security), CCNP, CCVP, CCSP and CCIE (RS, Voice, Security Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com From: Wayne Lawson [mailto:wlaw...@ipexpert.com] Sent: Monday, February 08, 2010 8:37 AM To: Drew LePla; Tyson Scott; Vik Malhi Cc: Wayne A. Lawson II Subject: Fwd: [OSL | CCIE_Voice] Proctorlabs VPN Issues Guys - I'd like to get together with all 3 of you. It appears that PLI problems are continuing and we need to get this figured out. Regards, Wayne A. Lawson II - CCIE #5244 Founder President - IPexpert Mailto: wlaw...@ipexpert.com Telephone: +1.810.326.1444, ext. 101 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 ::Message sent from iPhone:: IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (RS, Voice Security), CCNP, CCVP, CCSP and CCIE (RS, Voice, Security Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com. Begin forwarded message: From: scott carruthers scarruthe...@hotmail.com Date: February 8, 2010 6:52:23 AM EST To: 2xcci...@gmail.com, ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues
[OSL | CCIE_Voice] Proctorlabs VPN Issues
I haven't used a Proctorlabs session in a few weeks. In the past I had issues with the V3 easy VPN tunnels when using hardware phones. I believe there were updates sent out stating that many people were experiencing problems with the easy VPN solution but that the problems were not rectified. Are others having continued problems? Issues include: -Several phones in my lab register without issue, show line appearances, will go hook and receive dial tone, can dial PSTN numbers, but the call will not cut thru to two way audio - the phone will continue ringing after I attempt to pick it up on the PSTN phone. -This is not a GW, etc issue - some phones are fine - others are not - indentical configs and calling from same sites. -Not sure if this related to phone model by my lone 7960 is fine but 7970s experience issues. Thanks Scott _ Hotmail: Powerful Free email with security by Microsoft. http://clk.atdmt.com/GBL/go/201469230/direct/01/___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues
Hey Scott, Yes, I have been having the same type of problems. The 7960s usually appear to work fine. If I use a 7961 or 7971 for whatever reason they have issues. For instance in some cases I can't call from hq to br1. The phones will ring, but when I pick, there is no audio. Even though there is no audio if you leave the phone off the hook eventually the call drops. In some cases when calling the PSTN the phones will reset when I pickup or try to put on hold the 7961/71s will state that CM is down. Or like you said, you will pick up the PSTN phone and the 7961 phone does not acknowledge that the phone has been picked up. It is a pain. I thought it was just me. When studying on the voice version 2 pods I did not have any issues, but I was not using 7971s or 7961s. Not sure if that makes a difference. Thanks, Mike On Sun, Feb 7, 2010 at 4:32 PM, scott carruthers scarruthe...@hotmail.comwrote: I haven't used a Proctorlabs session in a few weeks. In the past I had issues with the V3 easy VPN tunnels when using hardware phones. I believe there were updates sent out stating that many people were experiencing problems with the easy VPN solution but that the problems were not rectified. Are others having continued problems? Issues include: -Several phones in my lab register without issue, show line appearances, will go hook and receive dial tone, can dial PSTN numbers, but the call will not cut thru to two way audio - the phone will continue ringing after I attempt to pick it up on the PSTN phone. -This is not a GW, etc issue - some phones are fine - others are not - indentical configs and calling from same sites. -Not sure if this related to phone model by my lone 7960 is fine but 7970s experience issues. Thanks Scott -- Hotmail: Powerful Free email with security by Microsoft. Get it now.http://clk.atdmt.com/GBL/go/201469230/direct/01/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Proctorlabs connection issue
Guys - I feel like a broken record here...PLEASE, PLEASE try to get it this time... If you are having technical difficulties - PLEASE CONTACT OUR SUPPORT TEAM DIRECTLY. All issues have been resolved - and everything that is being reported has ended up being an end user error. Believe it or not - many of our clients can't follow simple procedures - and blasting this list (over and over and over and over) with the se questions / topics is getting a bit annoying for me - and the other list members. Regards, Wayne A. Lawson II - CCIE #5244 Founder President - IPexpert Mailto: wlaw...@ipexpert.com Telephone: +1.810.326.1444, ext. 101 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 ::Message sent from iPhone:: IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (RS, Voice Security), CCNP, CCVP, CCSP and CCIE (RS, Voice, Security Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com. On Dec 26, 2009, at 10:07 AM, A A f...@hotmail.com wrote: I downloaded firfox and coulf telnet to routers. However , i still cannot connect to CUCM-PUB or any other servers. Date: Sat, 26 Dec 2009 19:39:42 +0530 Subject: Re: [OSL | CCIE_Voice] Proctorlabs connection issue From: arunv...@gmail.com To: f...@hotmail.com CC: ccie_voice@onlinestudylist.com try re-connecting ? if still not work contact support. On Sat, Dec 26, 2009 at 7:00 PM, A A f...@hotmail.com wrote: I can't seem to connect to anything. My session has already started and when I double click any router or server I get The webpage cannot be displayed. The vpn clinet is conneted. Can anybody through some light on this issue where have I gone wrong? Add other email accounts to Hotmail in 3 easy steps. Find out how. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Have more than one Hotmail account? Link them together to easily access both. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] proctorlabs
I am in the same boat ... cannot get into IPExperts. Devin Chamberlain (403) 560-8599 From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Omotayo Sent: Monday, December 14, 2009 10:43 AM To: OSL Group Subject: [OSL | CCIE_Voice] proctorlabs Hello, i can not access the proctorlabs and ipexpert site. Anyone with imilar experience or is it my connection? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] proctorlabs
Hstrange. The sites are up and I'm able to get to them... Regards, Wayne A. Lawson II - CCIE #5244 Founder President - IPexpert Mailto: wlaw...@ipexpert.com Telephone: +1.810.326.1444, ext. 101 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 ::Message sent from iPhone:: IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (RS, Voice Security), CCNP, CCVP, CCSP and CCIE (RS, Voice, Security Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com. On Dec 14, 2009, at 9:48 AM, Devin Chamberlain dchamberl...@unislumin.com wrote: I am in the same boat … cannot get into IPExperts. Devin Chamberlain (403) 560-8599 From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice- boun...@onlinestudylist.com] On Behalf Of Omotayo Sent: Monday, December 14, 2009 10:43 AM To: OSL Group Subject: [OSL | CCIE_Voice] proctorlabs Hello, i can not access the proctorlabs and ipexpert site. Anyone with imilar experience or is it my connection? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] proctorlabs
me too able to access the sites. On Mon, Dec 14, 2009 at 11:49 PM, Wayne Lawson groupst...@ipexpert.comwrote: Hstrange. The sites are up and I'm able to get to them... Regards, Wayne A. Lawson II - CCIE #5244 Founder President - IPexpert Mailto: wlaw...@ipexpert.comwlaw...@ipexpert.com Telephone: +1.810.326.1444, ext. 101 Live Assistance, Please visit: http://www.ipexpert.com/chat www.ipexpert.com/chat eFax: +1.810.454.0130 ::Message sent from iPhone:: IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (RS, Voice Security), CCNP, CCVP, CCSP and CCIE (RS, Voice, Security Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com. On Dec 14, 2009, at 9:48 AM, Devin Chamberlain dchamberl...@unislumin.com wrote: I am in the same boat … cannot get into IPExperts. *Devin Chamberlain* *(403) 560-8599* *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Omotayo *Sent:* Monday, December 14, 2009 10:43 AM *To:* OSL Group *Subject:* [OSL | CCIE_Voice] proctorlabs Hello, i can not access the proctorlabs and ipexpert site. Anyone with imilar experience or is it my connection? ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.comwww.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] proctorlabs
I am getting to both just fine from Florida. -- Thanks Larry Hadrava CCIE #12203 Check Out MyBlog: http://ccie12203.wordpress.com/ On Mon, Dec 14, 2009 at 1:19 PM, Wayne Lawson groupst...@ipexpert.comwrote: Hstrange. The sites are up and I'm able to get to them... Regards, Wayne A. Lawson II - CCIE #5244 Founder President - IPexpert Mailto: wlaw...@ipexpert.com Telephone: +1.810.326.1444, ext. 101 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 ::Message sent from iPhone:: IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (RS, Voice Security), CCNP, CCVP, CCSP and CCIE (RS, Voice, Security Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com. On Dec 14, 2009, at 9:48 AM, Devin Chamberlain dchamberl...@unislumin.com wrote: I am in the same boat … cannot get into IPExperts. *Devin Chamberlain* *(403) 560-8599* *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Omotayo *Sent:* Monday, December 14, 2009 10:43 AM *To:* OSL Group *Subject:* [OSL | CCIE_Voice] proctorlabs Hello, i can not access the proctorlabs and ipexpert site. Anyone with imilar experience or is it my connection? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Proctorlabs website down?
I concur- I can't get in touch with the right people. -- Vik Malhi CCIE #13890 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: Steve Slater sslate...@yahoo.com Date: Tue, 13 Oct 2009 21:42:16 -0700 (PDT) To: OSL Group ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Proctorlabs website down? Anyone else having issues getting to proctorlabs.com? I have sent an email to supp...@ipexpert.com but no response. Thanks, Steve ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Proctorlabs website down?
Anyone else having issues getting to proctorlabs.com? I have sent an email to supp...@ipexpert.com but no response. Thanks, Steve ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] ProctorLabs EzVPN NEM Mode
Great - glad to hear it Craig! -- Mark Snow CCIE #14073 (Voice, Security) Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.309.413.4097 Mailto: ms...@ipexpert.com -- Join our free online support and peer group communities: http://www.IPexpert.com/communities -- IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On- Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. -- On Oct 2, 2009, at 9:42 AM, Craig Staffin wrote: Mark, Just wanted to let you know that I flipped over to 192.168.5.x for my lab stuff and it seems like the NEM is working correctly and not dropping out anymore. Thanks for your great class and help! Craig Staffin cr...@staffin.org (C) 262-613-6003 On Fri, Sep 18, 2009 at 7:08 PM, Mark Snow ms...@ipexpert.com wrote: Well we use .20 internally. I can do .19 , but I'm sorry that I can't do .20. I can also do anything above .30 or any 172 subnet. HTH some? -- Mark Snow CCIE #14073 (Voice, Security) Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.309.413.4097 Mailto: ms...@ipexpert.com -- Join our free online support and peer group communities: http://www.IPexpert.com/communities -- IPexpert - The Global Leader in Self-Study, Classroom-Based, Video- On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. -- On Sep 18, 2009, at 18:36, Craig Staffin cmstaf...@gmail.com wrote: Mark, Any chance we can get it raised to .20 instead of 15? I really don't want to renumber again. Craig Staffin Voice Consulting Engineer Core BTS craig.staf...@corrbts.com 262-754-2634 Please forgive any typos. Sent from an iPhone with predictive typing. On Sep 18, 2009, at 4:03 PM, Mark Snow ms...@ipexpert.com wrote: All, I know quite a few of you have experienced issues with our NEM (Network Extension Mode) for EzVPN. To try to solve this, I made an MTU change on our end. Please also put this command on whatever you router's OUTSIDE interface is: ip mtu 1300 That has fixed the issue for me with larger (normal data) payload sizes. As for anyone beyond that still having an issue - please read the following: In trying to troubleshoot some of your configs, I have seen people send me configuration files that showed that your EzVPN INSIDE interfaces were configured with networks higher than what we have supported on our headend server. PLEASE MAKE SURE that any inside EzVPN interfaces have an IP address in the range of 192.168.x.x where the third octet is ONLY a 1 through a 15. I realize that the configs that we have up on ProctorLabs.com for Hardware EzVPN have ranges higher than that, but you WILL NEED TO CHANGE them on your side for this to work. We put those up there before we enabled NEM and I will try to get them changed ASAP. Report back either way to me and let me know what your results are! -- Mark Snow CCIE #14073 (Voice, Security) Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.309.413.4097 Mailto: ms...@ipexpert.com -- Join our free online support and peer group communities: http://www.IPexpert.com/communities -- IPexpert - The Global Leader in Self-Study, Classroom-Based, Video- On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. -- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] ProctorLabs EzVPN NEM Mode
Yes - we do have a demo Voice rack. Blog entry about it here: CCIE Blog » Voice Demo vRack @ Proctor Labs -- Mark Snow CCIE #14073 (Voice, Security) Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.309.413.4097 Mailto: ms...@ipexpert.com -- Join our free online support and peer group communities: http://www.IPexpert.com/communities -- IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On- Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. -- On Sep 19, 2009, at 11:36 PM, Kevin Damisch wrote: Thanks Mark. Is there a way that we can verify this will work without using our own session time? It would be nice to know everything will work ahead of time so we won’t have to waste valuable time troubleshooting the ezvpn and concentrate more on the voice lab material. Thanks, Kevin From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice- boun...@onlinestudylist.com] On Behalf Of Mark Snow Sent: Friday, September 18, 2009 4:03 PM To: CCIE Voice Maillist Subject: [OSL | CCIE_Voice] ProctorLabs EzVPN NEM Mode All, I know quite a few of you have experienced issues with our NEM (Network Extension Mode) for EzVPN. To try to solve this, I made an MTU change on our end. Please also put this command on whatever you router's OUTSIDE interface is: ip mtu 1300 That has fixed the issue for me with larger (normal data) payload sizes. As for anyone beyond that still having an issue - please read the following: In trying to troubleshoot some of your configs, I have seen people send me configuration files that showed that your EzVPN INSIDE interfaces were configured with networks higher than what we have supported on our headend server. PLEASE MAKE SURE that any inside EzVPN interfaces have an IP address in the range of 192.168.x.x where the third octet is ONLY a 1 through a 15. I realize that the configs that we have up on ProctorLabs.com for Hardware EzVPN have ranges higher than that, but you WILL NEED TO CHANGE them on your side for this to work. We put those up there before we enabled NEM and I will try to get them changed ASAP. Report back either way to me and let me know what your results are! -- Mark Snow CCIE #14073 (Voice, Security) Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.309.413.4097 Mailto: ms...@ipexpert.com -- Join our free online support and peer group communities: http://www.IPexpert.com/communities -- IPexpert - The Global Leader in Self-Study, Classroom-Based, Video- On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. -- This communication (including any attachments) is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify Vital Support Systems at 515 334 5700 and delete or destroy all copies and the original document. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] ProctorLabs EzVPN NEM Mode
Thanks Mark. Is there a way that we can verify this will work without using our own session time? It would be nice to know everything will work ahead of time so we won't have to waste valuable time troubleshooting the ezvpn and concentrate more on the voice lab material. Thanks, Kevin From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Mark Snow Sent: Friday, September 18, 2009 4:03 PM To: CCIE Voice Maillist Subject: [OSL | CCIE_Voice] ProctorLabs EzVPN NEM Mode All, I know quite a few of you have experienced issues with our NEM (Network Extension Mode) for EzVPN. To try to solve this, I made an MTU change on our end. Please also put this command on whatever you router's OUTSIDE interface is: ip mtu 1300 That has fixed the issue for me with larger (normal data) payload sizes. As for anyone beyond that still having an issue - please read the following: In trying to troubleshoot some of your configs, I have seen people send me configuration files that showed that your EzVPN INSIDE interfaces were configured with networks higher than what we have supported on our headend server. PLEASE MAKE SURE that any inside EzVPN interfaces have an IP address in the range of 192.168.x.x where the third octet is ONLY a 1 through a 15. I realize that the configs that we have up on ProctorLabs.comhttp://ProctorLabs.com for Hardware EzVPN have ranges higher than that, but you WILL NEED TO CHANGE them on your side for this to work. We put those up there before we enabled NEM and I will try to get them changed ASAP. Report back either way to me and let me know what your results are! -- Mark Snow CCIE #14073 (Voice, Security) Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.309.413.4097 Mailto: ms...@ipexpert.commailto:ms...@ipexpert.com -- Join our free online support and peer group communities: http://www.IPexpert.com/communities -- IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. -- This communication (including any attachments) is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify Vital Support Systems at 515 334 5700 and delete or destroy all copies and the original document. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] ProctorLabs EzVPN NEM Mode
All, I know quite a few of you have experienced issues with our NEM (Network Extension Mode) for EzVPN. To try to solve this, I made an MTU change on our end. Please also put this command on whatever you router's OUTSIDE interface is: ip mtu 1300 That has fixed the issue for me with larger (normal data) payload sizes. As for anyone beyond that still having an issue - please read the following: In trying to troubleshoot some of your configs, I have seen people send me configuration files that showed that your EzVPN INSIDE interfaces were configured with networks higher than what we have supported on our headend server. PLEASE MAKE SURE that any inside EzVPN interfaces have an IP address in the range of 192.168.x.x where the third octet is ONLY a 1 through a 15. I realize that the configs that we have up on ProctorLabs.com for Hardware EzVPN have ranges higher than that, but you WILL NEED TO CHANGE them on your side for this to work. We put those up there before we enabled NEM and I will try to get them changed ASAP. Report back either way to me and let me know what your results are! -- Mark Snow CCIE #14073 (Voice, Security) Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.309.413.4097 Mailto: ms...@ipexpert.com -- Join our free online support and peer group communities: http://www.IPexpert.com/communities -- IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On- Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. -- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Proctorlabs: 2 people on 1 lab--POD 18 V2
hey, proctorlabs hasn't replied yet. Is someone else on POD18 of voice v2 for 8am-4:30pm session right now? Ron
Re: [OSL | CCIE_Voice] Proctorlabs: 2 people on 1 lab--POD 18 V2
Ron - Have you called our support number? I'll copy Drew and Ryan on this, but can tell you that there shouldn't be anyone else on your pod. Regards, Wayne A. Lawson II - CCIE #5244 President Founder - IPexpert, Inc. Email: wlaw...@ipexpert.com Mobile: 810.334.1564 :: Message sent from iPhone. On Jun 23, 2009, at 9:09 AM, Ron Dawkins ronald.dawk...@comcast.net wrote: hey, proctorlabs hasn't replied yet. Is someone else on POD18 of voice v2 for 8am-4:30pm session right now? Ron
Re: [OSL | CCIE_Voice] Proctorlabs: 2 people on 1 lab--POD 18 V2
All devices are completely configured. Yes, I have contacted support...waiting on a reply. this is the 4th time in a row we've had technical issues and I couldn't use the scheduled lab. Thanks, Ron - Original Message - From: Wayne Lawson To: Ron Dawkins Cc: ccie_voice@onlinestudylist.com ; Drew LePla ; Ryan Barnum Sent: Tuesday, June 23, 2009 9:18 AM Subject: Re: [OSL | CCIE_Voice] Proctorlabs: 2 people on 1 lab--POD 18 V2 Ron - Have you called our support number? I'll copy Drew and Ryan on this, but can tell you that there shouldn't be anyone else on your pod. Regards, Wayne A. Lawson II - CCIE #5244 President Founder - IPexpert, Inc. Email: wlaw...@ipexpert.com Mobile: 810.334.1564 :: Message sent from iPhone. On Jun 23, 2009, at 9:09 AM, Ron Dawkins ronald.dawk...@comcast.net wrote: hey, proctorlabs hasn't replied yet. Is someone else on POD18 of voice v2 for 8am-4:30pm session right now? Ron
Re: [OSL | CCIE_Voice] Proctorlabs: 2 people on 1 lab--POD 18 V2
Guys, please. Come on. I have done probably 100 labs. Look at the configsI HAVEN'T PUT ANY CONFIGURATION ON ANY OF THESE AND THEY ARE CONFIGURED HOW DID IT GET THERE!!! Could I just please have a voucher for this session. I'll reschedule this one in the next 24 hours. Can I please also have the remainder of my vouchers refunded to me since you have acknowledged technical issues caused me not to be able to work on them!!!. Wayne, please get back to me on the refund. If necessary, I'll copy the configs and send them in email. Thanks, Ron Dawkins Cisco IP Communications Express Specialist CCVP/CCNP/CCSP/CCDP ronald.dawk...@comcast.net - Original Message - From: Drew Lepla To: Ron Dawkins Cc: Ryan Barnum ; Wayne Lawson Sent: Tuesday, June 23, 2009 9:53 AM Subject: Re: Proctorlabs: 2 people on 1 lab--POD 18 V2 Hello Ronald, I'm looking at the schedule and there was not a double booking for this mornings session. I checked your terminal server and you are currently the only customer on this pod. were you being kicked out of device at the beginning of your session? Did you notice old configurations on the device when you started the session? If I can be of further assistance, please let me know. -- Drew LePla Comp TIA A+, CCNA Technical Support Engineer - IPexpert, Inc. Telephone: +1.810.326.1444 x204 Fax: +1.810.454.0130 Mailto: dle...@ipexpert.com -- Join our free online support and peer group communities: http://www.IPexpert.com/communities -- IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. -- On Tue, Jun 23, 2009 at 9:09 AM, Ron Dawkins ronald.dawk...@comcast.net wrote: hey, proctorlabs hasn't replied yet. Is someone else on POD18 of voice v2 for 8am-4:30pm session right now? Ron
Re: [OSL | CCIE_Voice] Proctorlabs: 2 people on 1 lab--POD 18 V2
clarification..the last 4 sessions were technical issues. - Original Message - From: Ron Dawkins To: Drew Lepla ; ccie_voice@onlinestudylist.com Cc: Wayne Lawson Sent: Tuesday, June 23, 2009 10:03 AM Subject: Re: [OSL | CCIE_Voice] Proctorlabs: 2 people on 1 lab--POD 18 V2 Guys, please. Come on. I have done probably 100 labs. Look at the configsI HAVEN'T PUT ANY CONFIGURATION ON ANY OF THESE AND THEY ARE CONFIGURED HOW DID IT GET THERE!!! Could I just please have a voucher for this session. I'll reschedule this one in the next 24 hours. Can I please also have the remainder of my vouchers refunded to me since you have acknowledged technical issues caused me not to be able to work on them!!!. Wayne, please get back to me on the refund. If necessary, I'll copy the configs and send them in email. Thanks, Ron Dawkins Cisco IP Communications Express Specialist CCVP/CCNP/CCSP/CCDP ronald.dawk...@comcast.net - Original Message - From: Drew Lepla To: Ron Dawkins Cc: Ryan Barnum ; Wayne Lawson Sent: Tuesday, June 23, 2009 9:53 AM Subject: Re: Proctorlabs: 2 people on 1 lab--POD 18 V2 Hello Ronald, I'm looking at the schedule and there was not a double booking for this mornings session. I checked your terminal server and you are currently the only customer on this pod. were you being kicked out of device at the beginning of your session? Did you notice old configurations on the device when you started the session? If I can be of further assistance, please let me know. -- Drew LePla Comp TIA A+, CCNA Technical Support Engineer - IPexpert, Inc. Telephone: +1.810.326.1444 x204 Fax: +1.810.454.0130 Mailto: dle...@ipexpert.com -- Join our free online support and peer group communities: http://www.IPexpert.com/communities -- IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. -- On Tue, Jun 23, 2009 at 9:09 AM, Ron Dawkins ronald.dawk...@comcast.net wrote: hey, proctorlabs hasn't replied yet. Is someone else on POD18 of voice v2 for 8am-4:30pm session right now? Ron
Re: [OSL | CCIE_Voice] Proctorlabs: 2 people on 1 lab--POD 18 V2
Ron, We are looking into this and will get back to you. Obviously, if you have used ONE HUNDRED SESSIONS than you probably know that there's the ability to PRE-LOAD CONFIGS. It's possible either 1) a script ran when it wasn't supposed to or 2) you set the session up to pre-load a certain config or 3) you scheduled the session with less than 15 minutes (15 minutes or less before the session started) which didn't give the scripts enough time to run / clear the devices. Regardless, you seem to be isolated as our other customers aren't experiencing any problems. I will be in touch with you regarding the refund request. Regards, Wayne A. Lawson II - CCIE #5244 President Founder - IPexpert, Inc. Email: wlaw...@ipexpert.com Mobile: 810.334.1564 :: Message sent from iPhone. On Jun 23, 2009, at 10:03 AM, Ron Dawkins ronald.dawk...@comcast.net wrote: Guys, please. Come on. I have done probably 100 labs. Look at the configsI HAVEN'T PUT ANY CONFIGURATION ON ANY OF THESE AND THEY ARE CONFIGURED HOW DID IT GET THERE!!! Could I just please have a voucher for this session. I'll reschedule this one in the next 24 hours. Can I please also have the remainder of my vouchers refunded to me since you have acknowledged technical issues caused me not to be able to work on them!!!. Wayne, please get back to me on the refund. If necessary, I'll copy the configs and send them in email. Thanks, Ron Dawkins Cisco IP Communications Express Specialist CCVP/CCNP/CCSP/CCDP ronald.dawk...@comcast.net - Original Message - From: Drew Lepla To: Ron Dawkins Cc: Ryan Barnum ; Wayne Lawson Sent: Tuesday, June 23, 2009 9:53 AM Subject: Re: Proctorlabs: 2 people on 1 lab--POD 18 V2 Hello Ronald, I'm looking at the schedule and there was not a double booking for this mornings session. I checked your terminal server and you are currently the only customer on this pod. were you being kicked out of device at the beginning of your session? Did you notice old configurations on the device when you started the session? If I can be of further assistance, please let me know. -- Drew LePla Comp TIA A+, CCNA Technical Support Engineer - IPexpert, Inc. Telephone: +1.810.326.1444 x204 Fax: +1.810.454.0130 Mailto: dle...@ipexpert.com -- Join our free online support and peer group communities: http://www.IPexpert.com/communities -- IPexpert - The Global Leader in Self-Study, Classroom-Based, Video- On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. -- On Tue, Jun 23, 2009 at 9:09 AM, Ron Dawkins ronald.dawk...@comcast.net wrote: hey, proctorlabs hasn't replied yet. Is someone else on POD18 of voice v2 for 8am-4:30pm session right now? Ron
[OSL | CCIE_Voice] Proctorlabs - Down?
Is anyone else using Proctorlabs today, it appears to be down at the moment?
Re: [OSL | CCIE_Voice] Proctorlabs - Down?
Rob; There was a cut in the circuits that feed the Proctor Labs data center. Service is being restored and appears to be up now. Larry Hadrava CCIE #12203 CCNP CCNA Sr. Support Engineer – IPexpert, Inc. URL: http://www.IPexpert.com On Sat, Jun 13, 2009 at 9:54 AM, rob ukcisco@googlemail.com wrote: Is anyone else using Proctorlabs today, it appears to be down at the moment?
[OSL | CCIE_Voice] Proctorlabs connectivity issues
Does anyone have any ideas as to what could be going on with my ip blue client as mentioned below? Or why I was no longer able to connect to the terminal server? Josh Reinmann, MCSE/CCVP Fidelus Technologies, LLC 240 W. 35th St, 605 New York, NY 10001 Phone: 212-616-7840 Fax: 212-616-7850 Cell: 917-453-2312 Email: jreinm...@fidelus.com “Erasing the Lines Between Voice Data” please consider the environment before printing this e-mail -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccie_voice-requ...@onlinestudylist.com Sent: Wednesday, February 11, 2009 4:13 PM To: ccie_voice@onlinestudylist.com Subject: CCIE_Voice Digest, Vol 36, Issue 41 Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than Re: Contents of CCIE_Voice digest... Today's Topics: 1. Proctorlabs connectivity issues (Josh Reinmann) 2. Puzzling situation with Gatekeeper - PSTNGK connections (Cliff McGlamry) 3. Re: Proctorlabs connectivity issues (Cliff McGlamry) -- Message: 1 Date: Wed, 11 Feb 2009 15:21:17 -0500 From: Josh Reinmann jreinm...@fidelus.com Subject: [OSL | CCIE_Voice] Proctorlabs connectivity issues To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Message-ID: 0789a7dd55ce174eb6d97f57422151a40253e43...@nyc-exch03.fidelus.com Content-Type: text/plain; charset=us-ascii I had a lab session today and ran into a few major issues. 1. I attempted to use ip blue for all of my phones and experienced the following issues: a. When no loopback adapters were enabled, it worked fine b. If I enable a loopback adapter, the program crashes when I go to settings to make changes 2. After uninstalling IP Blue, rebooting, and attempting to vpn back into the lab, I was only able to connect to those devices that did not use dns (i.e. 6500 and ccm). 3. I did not get any dns resolution. In addition, after working with the support guys at proctor labs, they gave me the ip address of the terminal server for the routers, and I was unable to connect to it via ip address as well. The vpn profile I used was downloaded from the proctorlabs session. I'm not sure how to post the configs on it, please ask for what you might want with regards to that. Also, is there a config available to use an ASA5505 to connect to the lab? Josh Reinmann, MCSE/CCVP Fidelus Technologies, LLC 240 W. 35th St, 605 New York, NY 10001 Phone: 212-616-7840 Fax: 212-616-7850 Cell: 917-453-2312 Email: jreinm...@fidelus.commailto:jreinm...@fidelus.com [cid:image001.png@01C98C5B.EC3DB770] Erasing the Lines Between Voice Data P please consider the environment before printing this e-mail -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090211/620ac7a7/attachment-0001.htm -- next part -- A non-text attachment was scrubbed... Name: image001.png Type: image/png Size: 8475 bytes Desc: image001.png Url : http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090211/620ac7a7/attachment-0001.png -- Message: 2 Date: Wed, 11 Feb 2009 15:29:15 -0500 From: Cliff McGlamry cl...@mcglamry.net Subject: [OSL | CCIE_Voice] Puzzling situation with Gatekeeper - PSTNGK connections To: ccie_voice@onlinestudylist.com Message-ID: 002501c98c87$69907c00$9b2bf...@forsythe.com Content-Type: text/plain; charset=iso-8859-1 In working through Vol 1, lab 5, I've run across something that I've note been able to figure out. CallManager is configured with two trunks, one G711, and one G729. retry on BRQ has been allowed in the service parameters. Gatekeeper is configured as follows: interface Loopback0 ip address 172.22.100.1 255.255.255.0 ip ospf network point-to-point h323-gateway voip interface h323-gateway voip id VGK ipaddr 172.22.100.1 1719 h323-gateway voip h323-id IPIPGW h323-gateway voip bind srcaddr 172.22.100.1 gatekeeper zone local UCM-GK ipexpert.com 172.22.100.1 zone local ATA-GK ipexpert.com invia VGK outvia VGK zone local VGK ipexpert.com zone remote PSTN-WAN ipexpert.com 10.22.200.2 1719 zone prefix PSTN-WAN 011* gw-type-prefix 1#* default-technology no shutdown When a call is placed to the PSTN phone 0119876543 with the above configuration, calls ring through, but when the phone is answered, originating station gets fast busy. Place a second call
[OSL | CCIE_Voice] Proctorlabs connectivity issues
I had a lab session today and ran into a few major issues. 1. I attempted to use ip blue for all of my phones and experienced the following issues: a. When no loopback adapters were enabled, it worked fine b. If I enable a loopback adapter, the program crashes when I go to settings to make changes 2. After uninstalling IP Blue, rebooting, and attempting to vpn back into the lab, I was only able to connect to those devices that did not use dns (i.e. 6500 and ccm). 3. I did not get any dns resolution. In addition, after working with the support guys at proctor labs, they gave me the ip address of the terminal server for the routers, and I was unable to connect to it via ip address as well. The vpn profile I used was downloaded from the proctorlabs session. I'm not sure how to post the configs on it, please ask for what you might want with regards to that. Also, is there a config available to use an ASA5505 to connect to the lab? Josh Reinmann, MCSE/CCVP Fidelus Technologies, LLC 240 W. 35th St, 605 New York, NY 10001 Phone: 212-616-7840 Fax: 212-616-7850 Cell: 917-453-2312 Email: jreinm...@fidelus.commailto:jreinm...@fidelus.com [cid:image001.png@01C98C5B.EC3DB770] Erasing the Lines Between Voice Data P please consider the environment before printing this e-mail inline: image001.png
Re: [OSL | CCIE_Voice] Proctorlabs connectivity issues
I ran into connectivity issues today as well. One of my workstations could not connect to anything just like yours. I found I had an overlapping address space (10.0.1.X assigned by VPN and 10.0.1.X in use locally). Moving to a different subnet solved that. However, I haven't been able to get into the PSTN Troubleshooting interface yet on any session. It comes up saying no ip address for that host name. Support hasn't come up with any answers on that one. - Original Message - From: Josh Reinmann To: ccie_voice@onlinestudylist.com Sent: Wednesday, February 11, 2009 3:21 PM Subject: [OSL | CCIE_Voice] Proctorlabs connectivity issues I had a lab session today and ran into a few major issues. 1. I attempted to use ip blue for all of my phones and experienced the following issues: a. When no loopback adapters were enabled, it worked fine b. If I enable a loopback adapter, the program crashes when I go to settings to make changes 2. After uninstalling IP Blue, rebooting, and attempting to vpn back into the lab, I was only able to connect to those devices that did not use dns (i.e. 6500 and ccm). 3. I did not get any dns resolution. In addition, after working with the support guys at proctor labs, they gave me the ip address of the terminal server for the routers, and I was unable to connect to it via ip address as well. The vpn profile I used was downloaded from the proctorlabs session. I'm not sure how to post the configs on it, please ask for what you might want with regards to that. Also, is there a config available to use an ASA5505 to connect to the lab? Josh Reinmann, MCSE/CCVP Fidelus Technologies, LLC 240 W. 35th St, 605 New York, NY 10001 Phone: 212-616-7840 Fax: 212-616-7850 Cell: 917-453-2312 Email: jreinm...@fidelus.com Erasing the Lines Between Voice Data P please consider the environment before printing this e-mail image001.png
[OSL | CCIE_Voice] ProctorLabs 6500 - Issues ?
Is anyone else having issues on the 6500s on proctorlabs ? I can issue some commands but when I try to use commands with larger outputs the 6500 hangs and I have to reconnect. This is on all of the 6500s that I am experiencing the same symptoms. VOICE-6500-1 (enable) sho port 1 ..works VOICE-6500-1 (enable) sho port 2 ..hangs VOICE-6500-1 (enable) sho port 3 ..hangs I have sent an email to support. Please let me know if anyone else is experiencing this. Thx, Mike
Re: [OSL | CCIE_Voice] ProctorLabs 6500 - Issues ?
Mike, I have done some testing remotely and have not been able to replicate the issues you are experiencing. If anyone else is having this same issue on the current session please use the after-hours support option under Technical Support on your session page to contact support. On Sat, Dec 20, 2008 at 1:54 PM, Mike Brooks 2xcci...@gmail.com wrote: Is anyone else having issues on the 6500s on proctorlabs ? I can issue some commands but when I try to use commands with larger outputs the 6500 hangs and I have to reconnect. This is on all of the 6500s that I am experiencing the same symptoms. VOICE-6500-1 (enable) sho port 1 ..works VOICE-6500-1 (enable) sho port 2 ..hangs VOICE-6500-1 (enable) sho port 3 ..hangs I have sent an email to support. Please let me know if anyone else is experiencing this. Thx, Mike -- If I can be of further assistance, please let me know. -- Drew LePla Comp TIA A+, CCNA Technical Support Engineer - IPexpert, Inc. Telephone: +1.810.326.1444 x204 Fax: +1.810.454.0130 Mailto: dle...@ipexpert.com -- Join our free online support and peer group communities: http://www.IPexpert.com/communities -- IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. --
[OSL | CCIE_Voice] Proctorlabs Intermittent Outages ??
It appears that the www.proctorlabs.com website is intermittently going down. Is anyone else experiencing this issue ? Also configs were not reverted back on my pod and I was able to revert all the routers and switches but not the servers (pub/sub/unity). I have tried to revert the servers a few times and it is not working. Ugh.. anyone else having problems ? I have sent a few messages to support but I am not sure if they are getting them. Thx, Mike Brooks CCIE# 16027 (RS)
Re: [OSL | CCIE_Voice] Proctorlabs Intermittent Outages ??
Hi, Mike and others. We are getting the support pages and the guys are working feverishly to diagnose and address the issues. Thanks for your patience. We will be happy to provide a complimentary replacement session voucher to compensate for lost time due to issues experienced on our side. -- Matt Brooks Vice President - IPexpert, Inc. ASK ME about multiple student discounts! Follow IPexpert at Twitter.com/IPexpert Office: +1.810.326.1444 x101 Cell: +1.810.434.7447 Fax: +1.810.454.0130 LinkedIn: http://www.linkedin.com/in/matthewbrooks -- IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. -- On Sat, Nov 29, 2008 at 10:11 AM, Mike Brooks [EMAIL PROTECTED] wrote: It appears that the www.proctorlabs.com website is intermittently going down. Is anyone else experiencing this issue ? Also configs were not reverted back on my pod and I was able to revert all the routers and switches but not the servers (pub/sub/unity). I have tried to revert the servers a few times and it is not working. Ugh.. anyone else having problems ? I have sent a few messages to support but I am not sure if they are getting them. Thx, Mike Brooks CCIE# 16027 (RS)
[OSL | CCIE_Voice] Proctorlabs POD14 HQ phones retain wrong CCM settings
Hi there, I could not get POD14 HQ phones to register during my night session, upon browsing to phone's webpage I could see they retain these settings: 10.30.200.21 as CCM IP server (should be 10.4.200.21). Switching autoregistration+TFTP server from PUB to SUB and togging DHCP lease for the phones did not help. Also in the status messages on these phones there is a line saying TFTP 10.4.200 not authorised. I guess HW phones need to be reset from their keypads. Perhaps anyone has an idea how to reset an unregistered IP phone? Cheers Alex
[OSL | CCIE_Voice] Proctorlabs Outage
Dear Proctor Labs customer, Proctor Labs support would like to apologize for the recent Proctor Labs server downtime. We have identified and resolved the issue so you should now be able to login at www.proctorlabs.com . We will be sending out two voucher codes for those students who's sessions were affected by this outage. Again we apologize for the inconvenience and thank you for your patience and understanding. If I can be of further assistance, please let me know. Drew LePla - Comp TIA A+, CCNA Technical Support Engineer - Ipexpert, Inc. Telephone: +1.810.326.1444 x204 Fax: +1.810.454.0130 Mailto: [EMAIL PROTECTED] IPexpert - The Global Leader in Self-Study, Classroom-Based, Video Class-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications.