Stephanie A Rabbitt/Contractors/Cummins is out of the office.

[Stephanie . A . Rabbitt]

I will be out of the office from 07/08/2000 until 07/17/2000.

I am out of the office for the next week.  If you have any issues that need
attention please look at the following list and direct your problem to the
proper person.

For issues with the Web site CCN please contact Melissa Timberlake

For issues with the CCN Server please contact Doug Swetnam

For issues with NetObjects please contact Rich Whitney or Melissa
Timberlake.

Thank you and I will reply to all other messages upon my return on the 17th
of July.

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Advanced Security

[Sean Renet]

Anyone ever install CF Server, go into the administrator, click on the
advanced security link and get this:

  Error Diagnostic Information
  Security Policy Administration

  Security Policy Administration is not available.



I check the advanced security option on installation like usual.  I have
never gotten this error before

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: (Admin) Re: List wierdness ... again

[Michael Dinowitz]

Thanks for the feedback. :)

 Hello Michael,
 I like to take the opportunity and
 thank you for your great work keeping this list up and running for
 the CF-Community.
 For my part I am really glad that this list exists and haven't
 really encountered a bit inconvenience. I hardly noticed that
 there are troubles now and then;-)) This comes with the enormous
 traffic this list has, and it is running, and running and running.

 Thanks to you!

 Birgit




 Sunday, July 09, 2000, 12:04:46 PM, you wrote:

  We had a really bad series of bouncebacks that caused some routing
issues
  with the list. Rather than let the problem persist,  I removed all the
email
  from the spool and let it run 'fresh'. Last night I returned all the
removed
  email so it wouldn't lose anything. The result was a few duplicate
messages
  for some people and a delay for the messages in question. It's all fixed
and
  working well now. Sorry for the inconvenience.


  I just love my e-mail program's feature:
  'Kill duplicates'
 
  Wednesday, June 14, 2000, 2:43:20 PM, you wrote:
 
   I am starting to randomly recieve multiple copies of postings ...
  sometimes
   days apart. I have looked at the headers in all cases and the
messages
  are
   exactly the same ... content, sender, date/time sent, everything.
What
  the
   heck is going on? Is Mike running a 'proper' listserver or some
  homegrown CF
   app?
 
   Steve
 
 

 -
-
  
   Archives: http://www.eGroups.com/list/cf-talk
   To Unsubscribe visit
  http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk
or
  send a message to [EMAIL PROTECTED] with 'unsubscribe'
in
  the body.
 
 

 -
-
  
  Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
  To Unsubscribe visit
  http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk
or
  send a message to [EMAIL PROTECTED] with 'unsubscribe'
in
  the body.
 


 --

  Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
  To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


 --

 Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
 To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: (Admin) Re: List wierdness ... again

[Michael Dinowitz]

Whoops. Thought that was going private.

 Thanks for the feedback. :)

  Hello Michael,
  I like to take the opportunity and
  thank you for your great work keeping this list up and running for
  the CF-Community.
  For my part I am really glad that this list exists and haven't
  really encountered a bit inconvenience. I hardly noticed that
  there are troubles now and then;-)) This comes with the enormous
  traffic this list has, and it is running, and running and running.
 
  Thanks to you!
 
  Birgit
 
 
 
 
  Sunday, July 09, 2000, 12:04:46 PM, you wrote:
 
   We had a really bad series of bouncebacks that caused some routing
 issues
   with the list. Rather than let the problem persist,  I removed all the
 email
   from the spool and let it run 'fresh'. Last night I returned all the
 removed
   email so it wouldn't lose anything. The result was a few duplicate
 messages
   for some people and a delay for the messages in question. It's all
fixed
 and
   working well now. Sorry for the inconvenience.
 
 
   I just love my e-mail program's feature:
   'Kill duplicates'
  
   Wednesday, June 14, 2000, 2:43:20 PM, you wrote:
  
I am starting to randomly recieve multiple copies of postings ...
   sometimes
days apart. I have looked at the headers in all cases and the
 messages
   are
exactly the same ... content, sender, date/time sent, everything.
 What
   the
heck is going on? Is Mike running a 'proper' listserver or some
   homegrown CF
app?
  
Steve
  
  
 

 -
 -
   
Archives: http://www.eGroups.com/list/cf-talk
To Unsubscribe visit
  
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk
 or
   send a message to [EMAIL PROTECTED] with 'unsubscribe'
 in
   the body.
  
  
 

 -
 -
   
   Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
   To Unsubscribe visit
  
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk
 or
   send a message to [EMAIL PROTECTED] with 'unsubscribe'
 in
   the body.
  
 
 

 --
 
   Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
   To Unsubscribe visit
 http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
 send a message to [EMAIL PROTECTED] with 'unsubscribe' in
 the body.
 
 

 --
 
  Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
  To Unsubscribe visit
 http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
 send a message to [EMAIL PROTECTED] with 'unsubscribe' in
 the body.
 

 --

 Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
 To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: sssssssssssssssssssssssssssssssssssssssssssssssssssssss

[Philip Arnold - ASP]

 CFSET CutLength=30
 CFSET MyString="sss"
 CFLOOP Condition="Len(MyString) GT CutLength"
   CFOUTPUT#Left(MYString,CutLength)#/CFOUTPUT
   CFSET MyString = Right(MyString,Len(MyString)-CutLength))
 /CFLOOP

 Or something like that.

This method won't be intelligent about words, but it will work.

If you want it to look snazzy, then you'll want to mess about with checking
when a word ends, and only put up to the end of the last full word.

That's as long as it's a sentence and not just a lump of characters/numbers.

I had some code to do this, but I'll have to dig it out - which may take
some time (which I don't have much of these days)

Philip Arnold
ASP Multimedia Limited
T: +44 (0)20 8680 1133

"Websites for the real world"

**
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
**


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: contained in a list

[Philip Arnold - ASP]

 let's say.. mynumber = 2 ans mylist = 2,67,34,52
 
 cfIf listFind(myList,'2') = 0 ...
 
 You were very, very close. :)

cfIf listFind(myList,'2') IS 0

You were very, very close as well :D

Philip Arnold
ASP Multimedia Limited
T: +44 (0)20 8680 1133

"Websites for the real world"

**
This email and any files transmitted with it are confidential and 
intended solely for the use of the individual or entity to whom they 
are addressed. If you have received this email in error please notify 
the system manager.
**


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: contained in a list

[Philip Arnold - ASP]

 Correct me if I'm wrong here people, but I believe that if the
 list contains actual numbers (like from a numeric data field)
 then this list function will work correctly, but if it's a text
 string it won't.

 It's been a while since I checked on this.

ListContains looks to see if any entries in the list CONTAINS the item
you're looking for

Therefore;
ListContains("1,2,4,5,13,18,23,30","3") will product a number,
ListFind("1,2,4,5,13,18,23,30","3") won't.

CF doesn't treat numbers different from string when you're running a
non-numeric function on them.

Philip Arnold
ASP Multimedia Limited
T: +44 (0)20 8680 1133

"Websites for the real world"

**
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
**


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: sssssssssssssssssssssssssssssssssssssssssssssssssssssss

[Chris Evans]

I assumed it was a single long string that needed broken.  If you want to
break up a sentence, try CF_WRAP from the Tag Gallery.

Chris Evans
[EMAIL PROTECTED]
http://www.fuseware.com


-Original Message-
From: Philip Arnold - ASP [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 10, 2000 6:40 AM
To: [EMAIL PROTECTED]
Subject: RE: sss


 CFSET CutLength=30
 CFSET MyString="sss"
 CFLOOP Condition="Len(MyString) GT CutLength"
   CFOUTPUT#Left(MYString,CutLength)#/CFOUTPUT
   CFSET MyString = Right(MyString,Len(MyString)-CutLength))
 /CFLOOP

 Or something like that.

This method won't be intelligent about words, but it will work.

If you want it to look snazzy, then you'll want to mess about with checking
when a word ends, and only put up to the end of the last full word.

That's as long as it's a sentence and not just a lump of characters/numbers.

I had some code to do this, but I'll have to dig it out - which may take
some time (which I don't have much of these days)

Philip Arnold
ASP Multimedia Limited
T: +44 (0)20 8680 1133

"Websites for the real world"

**
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
**



--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Advanced Security

[Raymond K. Camden]

Check to make sure the advanced security services are running. Theres two of
them, SiteMinder Authorization and SiteMinder Authentication.

===
Raymond Camden, Cold Fusion Jedi Master for Syntegra (www.syntegra.com)
Allaire Certified Instructor and Member of Team Allaire

Email   : [EMAIL PROTECTED]
ICQ UIN : 3679482

"My ally is the Force, and a powerful ally it is." - Yoda


 -Original Message-
 From: Sean Renet [mailto:[EMAIL PROTECTED]]
 Sent: Monday, July 10, 2000 2:45 AM
 To: [EMAIL PROTECTED]
 Subject: Advanced Security


 Anyone ever install CF Server, go into the administrator, click on the
 advanced security link and get this:

   Error Diagnostic Information
   Security Policy Administration

   Security Policy Administration is not available.



 I check the advanced security option on installation like usual.  I have
 never gotten this error before

 --
 
 Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
 To Unsubscribe visit
 http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf
_talk or send a message to [EMAIL PROTECTED] with
'unsubscribe' in the body.

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: First and last day of Month

[Roody]

Try this to display the last day of the month:

#monthasstring(month(now()))# #daysinmonth(now())#, #year(now())#

Michael Baroody
[EMAIL PROTECTED]
http://roody.dyndns.org

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Need to take several row query and make into one row.

[mherbene]

What's the linkage to SomeOtherQuery?  When you are about to display
"#myquery.seminarsfor#", how do you know what you want to display (is it by
MyKey, or something else)?

You might be able to do it like this:

cfquery name="variables.myquery"
Select * from mytable
/cfquery

cfset variables.mykeys = valuelist(variables.myquery)

cfoutput
The value of field #variables.myquery.myvar[key_value]# is
#variables.myquery.myvalue[key_value]#.
cfoutput

but this requires knowing what key_value you want where.


-Original Message-
From: Rick Moon [mailto:[EMAIL PROTECTED]]
Sent: Sunday, July 09, 2000 8:17 PM
To: [EMAIL PROTECTED]
Subject: Need to take several row query and make into one row.


Hello,

The "why" for the following is an email unto itself, so if possible any
ideas on "how" would be greatly appreciate.

The cfquery name="MyQuery" is selecting from the following db table:

MyKey|MyVar| MyValue
-
0001|ClientName  |Rick
0002|SeminarsFor|aerospace
0003|RAMPrice|stable

Now I need to write (without looping or cfifing or cfswitching) or (changing
the the table itself) and (caching of some sort is desired):

The name of your seminar is: #MyQuery.SeminarsFor#
The state of CA is: #SomeOtherQuery.HighTaxes#

The only way I've been able to do it so far is to rebuild the above table
into:
ClientName |SeminarsFor|RAMPrice

Rick|aeospace| stable

But this constant table manipulation isn't practical.

Is the answer in sql? structures? arrays? or ?

TIA,

Rick









__
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Need to take several row query and make into one row.

[mherbene]

Oops, I meant:

cfoutput
The value of field #variables.myquery.myvar[listfind(variables.mykeys,
key_value)]# is
#variables.myquery.myvalue[listfind(variables.mykeys, key_value)]#.
cfoutput

This would probably be faster with the list portion implemented as a
structure, but I didn't take the time to think it out.  Also, the query and
list/structure could be kept as app or session vars if desired.



-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 10, 2000 8:41 AM
To: [EMAIL PROTECTED]
Subject: RE: Need to take several row query and make into one row.


What's the linkage to SomeOtherQuery?  When you are about to display
"#myquery.seminarsfor#", how do you know what you want to display (is it by
MyKey, or something else)?

You might be able to do it like this:

cfquery name="variables.myquery"
Select * from mytable
/cfquery

cfset variables.mykeys = valuelist(variables.myquery)

cfoutput
The value of field #variables.myquery.myvar[key_value]# is
#variables.myquery.myvalue[key_value]#.
cfoutput

but this requires knowing what key_value you want where.


-Original Message-
From: Rick Moon [mailto:[EMAIL PROTECTED]]
Sent: Sunday, July 09, 2000 8:17 PM
To: [EMAIL PROTECTED]
Subject: Need to take several row query and make into one row.


Hello,

The "why" for the following is an email unto itself, so if possible any
ideas on "how" would be greatly appreciate.

The cfquery name="MyQuery" is selecting from the following db table:

MyKey|MyVar| MyValue
-
0001|ClientName  |Rick
0002|SeminarsFor|aerospace
0003|RAMPrice|stable

Now I need to write (without looping or cfifing or cfswitching) or (changing
the the table itself) and (caching of some sort is desired):

The name of your seminar is: #MyQuery.SeminarsFor#
The state of CA is: #SomeOtherQuery.HighTaxes#

The only way I've been able to do it so far is to rebuild the above table
into:
ClientName |SeminarsFor|RAMPrice

Rick|aeospace| stable

But this constant table manipulation isn't practical.

Is the answer in sql? structures? arrays? or ?

TIA,

Rick









__
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Search on Allaire Site

[Bud]

On 7/9/00, Greg Creedon penned:
Do they really have their website in the corporate offices? I didn't think
too many people did that. Maybe I'm just spoiled, but all of the companies
I've worked at since 96 have had their sites off site. Even so, how would a
move affect the search capabilities?!

-Original Message-
From: David Sparkman [mailto:[EMAIL PROTECTED]]
Sent: Sunday, July 09, 2000 11:14 PM
To: [EMAIL PROTECTED]
Subject: RE: Search on Allaire Site


It has been down all week. I think is a hold over from the Allaire Corporate
Move.

Heh. To be blunt, I've ever seen a site down as frequently as 
Allaire's. I'd like to think it has little to do with ColdFusion, but 
whatever the reason, it sure wouldn't bode well with me if I was 
looking to make a decision on what web application to use and went to 
their site and it was down.
-- 

Bud Schneehagen - Tropical Web Creations

_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
ColdFusion Solutions / eCommerce Development
[EMAIL PROTECTED]
http://www.twcreations.com/
954.721.3452
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: CFCONTENT

[dscheide]

Hey,
   I had the same problem. I realized a simple work-around thou. Im using IIS, 
so i have the ability to specify a template as an error page( Say for 404 - 
Filenot found) on a per DIR basis. So what i did was create a template with 
code simlar to what you have. Then in a page i would link to the file i wanted 
(output.xsl) as if it were in the current directory.

ie:
http://blah.com/index.html
it has a link to output.xls (thus looking like http://blah.com/output.xls 
)

But, output.xsl doesnt exist there ... it exists some place else (ie non 
accessable via the web). So i causes a 404 Error, and i told IIS to use a 
speical template, so as to when the 404 happends, it will fetch the file and 
CFCONTENT to the client as the content of the error page. But the client has no 
idea they caused a 404 ... And the file name (when they goto save) will be 
output.xls.

the only downside might be an abundence of 404s in your server logs...

David Scheiderich

 When using cfcontent as in:
 cfcontent type="application/msexcel" file="d:\templates\OUTPUT.XLS"
 deletefile="YES"
 the file comes back with a .cfm extension but in XLS format. What do I need
 to do to correct this?
 
 
 Jim Watkins
 
 --

 Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
 To Unsubscribe visit 
 http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or 
send 
 a message to [EMAIL PROTECTED] with 'unsubscribe' in the 
body.
 
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: MySql ODBC Driver

[Dave Watts]

 Q1.  Has anyone had experience with "manually" installing the
 CF server since it doesn't detect the Apache server in this
 configuration (i.e. not a service per se on a win 95 machine).
 I have it mostly working by coping the cfdocs and cfide stuff
 to my ../htdocs/ directory. What won't work is any file system
 "Browse" function (like in the ODBC/DSN config page where you
 might press the "browse" button to find the database for the
 DSN). If I hit the browse button it tries indefinitely, but
 dose not return (I can however press "cancel" and regain control).
 I can't help but think it is related to my "manual" installation
 procedure being deficient somehow.

There isn't that much involved in setting up CF with Apache on Windows. All
you have to do is add the line for the Apache module in httpd.conf (which it
sounds like you've done) and put the CFIDE directory in the document root of
your web server. I suspect your problem is a Java applet problem, unrelated
to your install procedure. The browse functionality in CF Administrator is
provided by the CFTREE Java applet. You might try it with another browser.

 Q2.  Has anyone had experience with installing ODBC drivers?
 I installed the MyODBC drivers and tested fine. You can see it
 from the win95 control panel and such. However in the CF
 administrator page it is not displayed as an option in the
 drop down selection box. I looked in the registry to see
 if it got set up in there and that looks fine (and tests fine
 within the driver test program). Again I think it could be
 related to my manual install attempt. Is there any documentation
 out there on this?

Again, I think your install is fine. I haven't worked with MyODBC on
Windows, but I suspect that CF just can't work directly with creating and
managing datasources using that driver. This isn't the end of the world -
you should be able to create MyODBC datasources in the Control Panel, and
still be able to use them. Try this, and let me know if it doesn't work.

Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
voice: (202) 797-5496
fax: (202) 797-5444

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

CF triggering method in remote DCOM

[Ben Lowndes @ CW]

Hi.
I'm trying to trigger a method in a remote DCOM object over my network.

has anyone done this from a CF script?

ie from CF, send the DCOM object a command to print a message on the target
systems screen, for example?

Thnaks,

Ben

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: When should I use CFLOCK?

[Dave Watts]

 After reading the Allaire KB article on locking, I put CFLOCK's
 around all instances of any session or server variables. The one
 place that seems a bit muddy is if the read is within a CFIF
 statement. I put the lock around the entire CFIF but is that
 required? I implied that it was from the KB article but I have
 never seen that specifc guidance anywhere.

If you're doing something like this:

cfif IsDefined("Session.Foo")

then it should be locked. On the other hand, if you're just referencing a
session variable within a CFIF:

cfif Variables.Foo IS "bar"
cfset Session.Foo = "baz"
/cfif

then you could put the CFLOCK within the CFIF.

Lock 'em, Dano!

Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
voice: (202) 797-5496
fax: (202) 797-5444

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

CFMODULE

[Russel Madere]

I can't find anything in the documentation, but I still haven't had my 
first cup of coffee yet.

Does CFMODULE have a closing tag so it works the same as CF_ tags that 
require a closing tag?

Thanks.

Russel 

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: Allaire Certification Program

[Larry W. Virden]

From: "Mike Sheldon" [EMAIL PROTECTED]

 I would look for someone who *refused* to take it.

you would likely end up like an acquaintence, who hired someone who
claimed to 'know' coldfusion.  So far, this person has had to be taught
sql, html, coldfusion, program design, database design, debugging, ...
and problems continue.  Apparently the new
employee's idea of 'knowing' coldfusion was that he read the word 
on the internet once...
-- 
Never apply a Star Trek solution to a Babylon 5 problem.
Larry W. Virden mailto:[EMAIL PROTECTED] URL: http://www.purl.org/NET/lvirden/
Unless explicitly stated to the contrary, nothing in this posting should 
be construed as representing my employer's opinions.
--
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: JavaScript and CF

[Billy Cravens]

Steve DeWitt wrote:
 
  Javascript can run "server-side" but not on a CF server. Ever heard of
 server side javascript that runs on a web server?
 

Of course I have.  However, for purposes of keeping the explanation
simple, I chose elucidate the difference between server-side Cold
Fusion, and client-side JavaScript.  I've seen very few implementations
of server-side JavaScript to be honest with you.  So I chose not to
obfuscate my answer with server-side JavaScript.  Perhaps it would have
made things more clear had I jumped off on a rant about server-side
JavaScript, what languages support it, and then go into a discussion
about ASP, where you can run JScript (not JavaScript), VBScript, Perl,
and if a programmer were creative enough to build an interface to
CFScript, CFScript.

-- 
Billy Cravens
[EMAIL PROTECTED]
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: Browser Header Strings

[Billy Cravens]

http://www.uoguelph.ca/~gnasby/projects/web_browser_info/browser_mappings_list_big.html


  Does anyone know where there's a good complete list of
  browser header strings?
 
  I need to restrict access, as reliably as possible, to
  Win95/98/2000/NT4+ browsers.

-- 
Billy Cravens
[EMAIL PROTECTED]
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: CFMODULE

[Billy Cravens]

No.  In that case, you'll have to use a "normal" custom tag.

-- 
Billy Cravens
[EMAIL PROTECTED]




Russel Madere wrote:
 
 I can't find anything in the documentation, but I still haven't had my
 first cup of coffee yet.
 
 Does CFMODULE have a closing tag so it works the same as CF_ tags that
 require a closing tag?
 
 Thanks.
 
 Russel
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: When should I use CFLOCK?

[Ben Lowndes @ CW]

Ok, what if you are using application variables as a part of the IF
statement and session in the IF? e.g:

CFIF Application.Foo

CFSET Session.bar = 1

/CFIF

Is it ok to nest different types of Locks (session and application). And
what if Application.foo was actually session.foo? Would I need nested
session lock-ing or will the outer Lock around the if statement lock all
session variables with in?

Ben

-Original Message-
From: Dave Watts [mailto:[EMAIL PROTECTED]]
Sent: 10 July 2000 14:36
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: RE: When should I use CFLOCK?


 After reading the Allaire KB article on locking, I put CFLOCK's
 around all instances of any session or server variables. The one
 place that seems a bit muddy is if the read is within a CFIF
 statement. I put the lock around the entire CFIF but is that
 required? I implied that it was from the KB article but I have
 never seen that specifc guidance anywhere.

If you're doing something like this:

cfif IsDefined("Session.Foo")

then it should be locked. On the other hand, if you're just referencing a
session variable within a CFIF:

cfif Variables.Foo IS "bar"
cfset Session.Foo = "baz"
/cfif

then you could put the CFLOCK within the CFIF.

Lock 'em, Dano!

Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
voice: (202) 797-5496
fax: (202) 797-5444


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: RDS password

[Billy Cravens]

The option to save the pw could have become unchecked.  Right click on
your RDS server, click Properties.  Check the connection settings.

-- 
Billy Cravens
[EMAIL PROTECTED]





"Parker, Kevin" wrote:
 
 I'm working locally and all of a sudden I keep getting asked for the RDS
 password. I've restarted the PC but it still keeps happening. Any clues
 please?
 
 
 Kevin Parker
 Service and Communication
 WorkCover Corporation
 
 [EMAIL PROTECTED]
 
 ph:  +61 8 82332548
 fax: +61 8 82332000
 
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: CFMODULE

[Russel Madere]

Thanks.

I need to get up earlier and make my coffee first thing :)

Russel

At 08:51 AM 7/10/2000 -0500, you wrote:
No.  In that case, you'll have to use a "normal" custom tag.

--
Billy Cravens
[EMAIL PROTECTED]




Russel Madere wrote:
 
  I can't find anything in the documentation, but I still haven't had my
  first cup of coffee yet.
 
  Does CFMODULE have a closing tag so it works the same as CF_ tags that
  require a closing tag?
 
  Thanks.
 
  Russel
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or 
send a message to [EMAIL PROTECTED] with 'unsubscribe' in 
the body.

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Know where I can find Chr(*) definitions?

[Bert Dawson]

TEXTAREA ROWS="20"
CFOUTPUT
CFLOOP INDEX="i" FROM="1" TO="255"
#i# = #chr(i)#
/CFLOOP
/CFOUTPUT
/TEXTAREA

Bert 

 -Original Message-
 From: GE [mailto:[EMAIL PROTECTED]]
 Sent: 07 July 2000 18:44
 To: [EMAIL PROTECTED]
 Subject: Re: Know where I can find Chr(*) definitions?
 
 
 Hello Ric,
 
 What you are looking for is an ASCII table. A quick search 
 should find one for you - or you could look it up in any 
 refernce manual you have on programming (should be one in one of
 them). To be sure you have found what you are looking for 
 just compare the table values of 10 and 13 to verify that you 
 have a carraige return and a line feed.
 
 hth,
 Nelson
 
 
 Ric Smith wrote:
 
  Anyone know of anywhere I can find the definition
  for the Chr(*) stuff online? Only ones I know are
  Chr(10) and Chr(13).
 
  Just curious, thanks.
 
  Ric Smith
 
  
 --
 
  Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
  To Unsubscribe visit 
 http://www.houseoffusion.com/index.cfm?sidebar=listsbody=list
s/cf_talk or send a message to [EMAIL PROTECTED] with
'unsubscribe' in the body.


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: Please Help me for my interview

[Billy Cravens]

I've found that most beginner developers (and non-beginners alike!) are
very dependent upon CFStudio's wizards -- either the query builder, or
just the buttons in Studio (ie they know what to click to get a
cfinclude)

However, during a job interview, you won't have studio in front of you
-- you will need to know both CFML and SQL.  Since CFStudio makes it
easy to program (and program well if you can), you can do so without
knowing the language.  So I'd pick up the references and start reading
(recommendations: CFML - language reference at the back of Forta's book,
SQL - SQL for Dummies or Forta's Teach Yourself SQL in 10 Minutes.

-- 
Billy Cravens
[EMAIL PROTECTED]



Shally Kon wrote:
 
 Hi!
 Every one out there
 I have 6 months experience on ColdFusion4.0.
 I have made a site like monsterboard.com for job placement.
 and am preparing for an interview which is my first interview on ColdFusion.
 I know there are great programmers here on this site .
 PLEASE TELL ME WHAT TYPE OF QUESTIONS ARE ASKED IN THE INTERVIEW
 IT WOULD BE GREAT HELP TO ME IF YOU CAN SEND ME SOME QUESTIONS AND IF POSSIBLE WITH 
ANSWERS.
 
 THANKS IN ADVANCE
 Shally
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: CFMODULE

[Dave Watts]

 Does CFMODULE have a closing tag so it works the same as CF_ 
 tags that require a closing tag?

Sure:

cfmodule name="foo"
...
/cfmodule

Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
voice: (202) 797-5496
fax: (202) 797-5444
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: strong authentication and CF

[Steve Bernard]

I haven't had any experience tying SecureID into CF but, I'm interested in
your decision to implement SecureID over PKI. If you don't mind sharing,
what were the major points driving this decision? I ask because I too am
interested in SecureID as well as PKI. PKI seems more cost effective, easier
to implement, and provides more security over the wire than SecureID. Of
course, SecureID has its strong points too, like the two factor
authentication. I am interested in hearing your experience.

Thanks,

Steve


-Original Message-
From: Bruce Altner [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 08, 2000 10:55 AM
To: [EMAIL PROTECTED]
Subject: strong authentication and CF


Greetings:

We're looking to build an application that will automate the process
whereby people "sign off" at various stages of a
work flow process. Security concerns dictate that we use some kind of
digital signature/strong authentication methodology such as certificates
(PKI), smartPass, etc. We're not ready for a PKI solution yet but are
considering one which uses the SecurID token system (from Security
Dynamics), which requires the user to input a number generated by the
token, which changes with time. The user is authenticated by a SecurID
server on one host (not a Web server) and we want to tie this to our CF
app, running on another server. I think we'll need to get CF to talk to the
other box through some API (TBD) via a CFX tag written in C++ or Java.

Has anyone had success doing this kind of thing? Suggestions for tools,
approaches would be welcome.

Thanks,
Bruce

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Know where I can find Chr(*) definitions?

[Chris Evans]

That doesn't help much with Tab, ESC, or DLE (data link escape - CHR(16).

It's a good reference for printable characters, though.

Chris Evans
[EMAIL PROTECTED]
http://www.fuseware.com


-Original Message-
From: Bert Dawson [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 10, 2000 10:04 AM
To: '[EMAIL PROTECTED]'
Subject: RE: Know where I can find Chr(*) definitions?


TEXTAREA ROWS="20"
CFOUTPUT
CFLOOP INDEX="i" FROM="1" TO="255"
#i# = #chr(i)#
/CFLOOP
/CFOUTPUT
/TEXTAREA

Bert

 -Original Message-
 From: GE [mailto:[EMAIL PROTECTED]]
 Sent: 07 July 2000 18:44
 To: [EMAIL PROTECTED]
 Subject: Re: Know where I can find Chr(*) definitions?


 Hello Ric,

 What you are looking for is an ASCII table. A quick search
 should find one for you - or you could look it up in any
 refernce manual you have on programming (should be one in one of
 them). To be sure you have found what you are looking for
 just compare the table values of 10 and 13 to verify that you
 have a carraige return and a line feed.

 hth,
 Nelson


 Ric Smith wrote:

  Anyone know of anywhere I can find the definition
  for the Chr(*) stuff online? Only ones I know are
  Chr(10) and Chr(13).
 
  Just curious, thanks.
 
  Ric Smith
 
 
 --
 
  Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
  To Unsubscribe visit
 http://www.houseoffusion.com/index.cfm?sidebar=listsbody=list
s/cf_talk or send a message to [EMAIL PROTECTED] with
'unsubscribe' in the body.


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Using ReplaceNoCase with a quote in the string

[Frédéric LeMieux]

Double your quotes :
CFSET PAGE=
  REPLACENOCASE(CFHTTP.FILECONTENT,
  "A HREF=""http://www.blah.com",
  "go to A HREF=""http://www.blah.com",
   "all")

It should work then

-Original Message-
From: cf kaizen [mailto:[EMAIL PROTECTED]]
Sent: Sunday, July 09, 2000 9:31 AM
To: [EMAIL PROTECTED]
Subject: Using ReplaceNoCase with a quote in the string


Hi All,

I am trying to replace some text that has a quote
already in it. ReplaceNoCase trips up on the quote and
throws an error. I've tried escaping the quote, or
placing a "\" in front of it, but I must have the
syntax wrong. Can this be done? My code is below.
Thanks in advance for you help!

CFSET PAGE=
  REPLACENOCASE(CFHTTP.FILECONTENT,
  "A HREF="http://www.blah.com",
  "go to A HREF="http://www.blah.com",
   "all")

Regards,
Andrew

__
Do You Yahoo!?
Get Yahoo! Mail – Free email you can access from anywhere!
http://mail.yahoo.com/

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: Need to take several row query and make into one row.

[Kevin Marshall]

Rick,

You may want to take a look at a custom tag called CF_QueryToStruct.
Basically it will take a query like yours and convert it to a struct that 
would look like this:
MyQuery.MyVar.MyValue

I've used this tag with great success in a situation something like yours.

Find the tag at:
http://devex.allaire.com/developer/gallery/info.cfm?ID=CA34740D-2830-11D4-AA 
9700508B94F380method=Full
(yep, the url probably wrapped - if you want, just search in the Developers 
Exchange for "QuerytoStruct")

Kevin


At 05:16 PM 7/9/00 -0700, you wrote:
Hello,

The "why" for the following is an email unto itself, so if possible any
ideas on "how" would be greatly appreciate.

The cfquery name="MyQuery" is selecting from the following db table:

MyKey|MyVar| MyValue
-
0001|ClientName  |Rick
0002|SeminarsFor|aerospace
0003|RAMPrice|stable

Now I need to write (without looping or cfifing or cfswitching) or (changing
the the table itself) and (caching of some sort is desired):

The name of your seminar is: #MyQuery.SeminarsFor#
The state of CA is: #SomeOtherQuery.HighTaxes#

The only way I've been able to do it so far is to rebuild the above table
into:
ClientName |SeminarsFor|RAMPrice

Rick|aeospace| stable

But this constant table manipulation isn't practical.

Is the answer in sql? structures? arrays? or ?

TIA,

Rick

--
Kevin Marshall
Web Application Developer
eCalton.com, Inc.
Vero Beach, FL
www.ecalton.com
[EMAIL PROTECTED]
561.569.4500

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: CFMODULE

[Paul Wakefield]

Um. It works exactly the same either way for me.
i.e.

CFMODULE TEMPLATE="foo.cfm"
...
/CFMODULE

works just like

cf_foo
...
/cf_foo

-- 
Paul Wakefield

Hanlon's Razor - Never attribute to malice that which can be adequately
explained by stupidity.


 -Original Message-
 From: Russel Madere [mailto:[EMAIL PROTECTED]]
 Sent: Monday, July 10, 2000 3:52 PM
 To: [EMAIL PROTECTED]
 Subject: Re: CFMODULE
 
 
 Thanks.
 
 I need to get up earlier and make my coffee first thing :)
 
 Russel
 
 At 08:51 AM 7/10/2000 -0500, you wrote:
 No.  In that case, you'll have to use a "normal" custom tag.
 
 --
 Billy Cravens
 [EMAIL PROTECTED]
 
 
 
 
 Russel Madere wrote:
  
   I can't find anything in the documentation, but I still 
 haven't had my
   first cup of coffee yet.
  
   Does CFMODULE have a closing tag so it works the same as 
 CF_ tags that
   require a closing tag?
  
   Thanks.
  
   Russel
 -
 -
 Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
 To Unsubscribe visit 
 http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lis
ts/cf_talk or 
send a message to [EMAIL PROTECTED] with 'unsubscribe' in 
the body.


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

FW: Need to take several row query and make into one row.

[James Hancock]

You might be able to use the DECODE function to do what you want.  (If
you're on Oracle)

You'll have to refer to the documentation for a detailed explanation of that
one... ;]

J.


-Original Message-
From: Rick Moon [mailto:[EMAIL PROTECTED]] 
Sent: Sunday, July 09, 2000 8:17 PM
To: [EMAIL PROTECTED]
Subject: Need to take several row query and make into one row.


Hello,

The "why" for the following is an email unto itself, so if possible any
ideas on "how" would be greatly appreciate.

The cfquery name="MyQuery" is selecting from the following db table:

MyKey|MyVar| MyValue
-
0001|ClientName  |Rick
0002|SeminarsFor|aerospace
0003|RAMPrice|stable

Now I need to write (without looping or cfifing or cfswitching) or (changing
the the table itself) and (caching of some sort is desired):

The name of your seminar is: #MyQuery.SeminarsFor#
The state of CA is: #SomeOtherQuery.HighTaxes#

The only way I've been able to do it so far is to rebuild the above table
into:
ClientName |SeminarsFor|RAMPrice

Rick|aeospace| stable

But this constant table manipulation isn't practical.

Is the answer in sql? structures? arrays? or ?

TIA,

Rick









__
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

FW: oracle timestamps

[James Hancock]

The oracle reserved word SYSDATE will achieve a current timestamp without
all the hassle of formatting.  

INSERT INTO DATA_TABLE(NAME, DATE)
VALUES ('#name#', SYSDATE)

j.

-Original Message-
From: Stephen Garrett [mailto:[EMAIL PROTECTED]] 
Sent: Friday, July 07, 2000 1:57 PM
To: [EMAIL PROTECTED]
Subject: RE: oracle  timestamps



The default syntax of the Oracle TimeStamps is set by the DBA. I always
use the TO_CHAR function on date stamps and format them the way I want
for display. (used in the SQL statement)

Steve

At 08:32 AM 7/7/2000 -0400, [EMAIL PROTECTED] wrote:
I would guess that the default Oracle date format on the two machines is
set
differently. Unfortunately a cursory search did not turn up info on
how/where this is set. 

-Original Message-
From: Mike Amburn [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 06, 2000 6:56 PM
To: Cf-Talk
Subject: oracle  timestamps


does anyone know why oracle would not accept timestamps?

when i try to insert Now() into a date/time field, oracle returns with the
error "illegal character". FYI, Now() outputs a timestamp like:
   {ts '/mm/dd hh24/mi/ss'}

stranger yet... all my queries work when i run the application locally on a
workstation with an ODBC connection out to the database. however, the
application refuses to work when i run the application locally on the
database.

the workstations are Win2000, CF 4.5.1 Ent, Oracle 8.1.6.0 ODBC driver
the server is WinNT SP6a, CF 4.5.1 Ent, Oracle 8.1.6.0 ODBC driver

ideas???

-mike

---
-
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.
---
---
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


--
Stephen Garrett
GPS
[EMAIL PROTECTED]   (360) 896-2714
ICQ# 10776767

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Slightly OT:Single Server vs. Cluster Comparison

[paul smith]

OK.  So what I've been trying to say is that couldn't CF
be used to have application.cfm alternate datasources
analogous to Round Robin in DNS?

And the datasources could be on different SQL Server
boxes?  (Non Enterprise version).

best, paul

At 09:32 AM 7/10/00 -0400, you wrote:
  How would you cluster SQL Server servers?
  That is, what software/hardware would you
  use to do it?

It depends on what exactly I was trying to do. However, what I'd probably
end up with is using the clustering in SQL Server 7 Enterprise Edition,
which allows you to create a cluster of two machines (which is enough for
most purposes).

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: Developer Conference: Hotel Accommodations

[kraybill]

I used Priceline for that e-commerce conf  and got a room at the Marriot for about 
$50...

Gene Kraybill

James Brown wrote:

 Several people who went to the e-commerce meeting in Rockville a couple
 of months ago used priceline and got some pretty good deals on both
 flight and room ($80 a nite for the Rockville Marriot).
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Getting the ID after insert...

[Dave Watts]

 I have a question about the code below. This was done by a
 colleague of mine, he is pretty handy with SQL coding. One of
 his observations was the time involved in writing stored
 procedures and then calling them with CFSTORPROC. I agree, that
 discouraged me somewhat in the past, but I knew of no other way.
 He put this transact-sql query together and it seems solid,
 works well.

 My question(s): Have any of you tried this? Any problems? Can
 anyone see a potential problem?

 Thanks. -Gary McNeel

 CFQUERY name="InsertLkpRec" datasource="#Application.DSN#"
   DECLARE @LookupID char(6)
   DECLARE @MembersID char(6)
 !--- Insert Member Lookup Record ---
   INSERT INTO tblMemberLkp
   (DBAName, ReferredBy )
   VALUES
   ('#Form.DBAName#', '#Form.ReferredBy#')

   SELECT @LookupID = @@IDENTITY

 ! Members Record ---
   INSERT INTO Members
   (MemberLkpID)
 VALUES
   (@LookupID)

 SELECT @MembersID = @@IDENTITY

 !--- Insert Site Info record ---
   INSERT INTO tblSiteInfo
   (BusName, Website, RecStatusID, RecOriginID, MembersID,
   PartnerNumber, SourceID, ApplicationDate)
 VALUES
   ('#Form.BusName#', '#Lcase(Form.Website)#', 2, 1, @MembersID,
   '#Form.PartnerNumber#', '#Form.SourceID#', getdate())
 /CFQUERY

There isn't anything really wrong with that, from a general standpoint. ODBC
2 and later allow you to run SQL batches, and as long as your ODBC driver
supports it (and the SQL Server one certainly does), you can write batches
using T-SQL.

However, I don't really think it takes any longer to write that as a stored
procedure, which will give you better results generally. SQL Server can
perform better optimization of stored procedures than it can with ODBC
passthrough queries, usually. I've seen performance and reliability
increases using stored procedures for INSERTs, believe it or not!

Also, from a security standpoint, you'd generally want to lock down your
ODBC datasources as much as possible; stored procedures give you an easy way
to do this.

Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
voice: (202) 797-5496
fax: (202) 797-5444

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: When should I use CFLOCK?

[Matt Wisdom]

How should the timeout manifest itself if it is set to true? I set a cfloop
inside a CFLOCK to force it to timeout, but I see no response... I expected
a failure page -- I don't think cfcatch is required, is it?

Matt

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Allaire Certification Program

[Mike Sheldon]

Hardly.

I can spot fakers in a flat second, and I ALWAYS ask for samples of code
(and make them explain why they did it that way).

I just don't like working with sheep.

Michael J. Sheldon
Internet Applications Developer
Phone: 480.699.1084
http://www.desertraven.com/
PGP Key Available on Request

-Original Message-
From: Larry W. Virden [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 10, 2000 06:44
To: [EMAIL PROTECTED]
Subject: Re: Allaire Certification Program



From: "Mike Sheldon" [EMAIL PROTECTED]

 I would look for someone who *refused* to take it.

you would likely end up like an acquaintence, who hired someone who
claimed to 'know' coldfusion.  So far, this person has had to be taught
sql, html, coldfusion, program design, database design, debugging, ...
and problems continue.  Apparently the new
employee's idea of 'knowing' coldfusion was that he read the word
on the internet once...
--
Never apply a Star Trek solution to a Babylon 5 problem.
Larry W. Virden mailto:[EMAIL PROTECTED] URL:
http://www.purl.org/NET/lvirden/
Unless explicitly stated to the contrary, nothing in this posting should
be construed as representing my employer's opinions.
--

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: scheduler won't schedule

[TDesimone]

Stop and start the Cold Fusion Application Server (in the Windows' Control
Panel; Services screen), after you save your scheduled task.




Bruce Altner [EMAIL PROTECTED] on 07/08/2000 11:01:12 AM

Please respond to [EMAIL PROTECTED]

To:   [EMAIL PROTECTED]
cc:

Subject:  scheduler won't schedule


Hi:

I'm having no luck getting my script to run periodically according to the
schedule I set up in the CF administrator. The process just doesn't seem to
kick off, and no entry appears in the scheduler.log file (which I had to
create manually...it wasn't there by default). This if for CF 4.0.1 running
on NT Workstation.

Anyone else experience this?

Thanks,
Bruce

--

Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.






--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Allaire Certification Program

[Sharon DiOrio]

I second that.  Always ask to see some code.  Even if they have to sanitize
it to keep to current NDA agreements.  We've had candidates who seemed to
be perfection on paper and even held their own during the interview, but
their code told the truth.

Sharon

At 08:39 AM 7/10/2000 -0700, Mike Sheldon wrote:
Hardly.

I can spot fakers in a flat second, and I ALWAYS ask for samples of code
(and make them explain why they did it that way).

I just don't like working with sheep.

Michael J. Sheldon
Internet Applications Developer
Phone: 480.699.1084
http://www.desertraven.com/
PGP Key Available on Request

-Original Message-
From: Larry W. Virden [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 10, 2000 06:44
To: [EMAIL PROTECTED]
Subject: Re: Allaire Certification Program



From: "Mike Sheldon" [EMAIL PROTECTED]

 I would look for someone who *refused* to take it.

you would likely end up like an acquaintence, who hired someone who
claimed to 'know' coldfusion.  So far, this person has had to be taught
sql, html, coldfusion, program design, database design, debugging, ...
and problems continue.  Apparently the new
employee's idea of 'knowing' coldfusion was that he read the word
on the internet once...
--
Never apply a Star Trek solution to a Babylon 5 problem.
Larry W. Virden mailto:[EMAIL PROTECTED] URL:
http://www.purl.org/NET/lvirden/
Unless explicitly stated to the contrary, nothing in this posting should
be construed as representing my employer's opinions.
--

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.

---
---
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.
 

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

OT UNIX QUESTION W/CFEXECUTE

[William J Wheatley]

I've running Sybase SQL (same as sql) on Linux
We have 4.5 and i'm using CFEXECUTe to run a unix script to create a USER
What i need to do is find a way to pass the %1(username) %2(password)  to
the script so i can say ok create user
TESTUSER with password blah that way its automates it
Any ideas

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

401.3 Error in a secured area

[Robert Everland]

I secured and administrative section on my website, and to make it
so netscape could get in there I did basic authentication using https. Now
when I use Netscape I get this HTTP Error 401

401.3 Unauthorized: Unauthorized due to ACL on resource

This error indicates that the credentials passed by the client do not have
access to the particular resource on the server. This resource could be
either the page or file
listed in the address line of the client, or it could be another file on the
server that is needed to process the file listed on the address line of the
client.

Please make a note of the entire address you were trying to access and then
contact the Web server's administrator to verify that you have permission to
access the
requested resource.

Anyone know how to resolve this?


Robert Everland III
Web Developer
Dixon Ticonderoga
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: When should I use CFLOCK?

[Seth Petry-Johnson]

 How should the timeout manifest itself if it is set to true? I set a
cfloop
 inside a CFLOCK to force it to timeout, but I see no response... I
expected
 a failure page -- I don't think cfcatch is required, is it?

I believe that the TIMEOUT attribute of CFLOCK specifies how long CF should
wait to acquire the lock itself, not a maximum execution time of the locked
code.

Regards,
Seth Petry-Johnson
Argo Enterprise and Associates

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: When should I use CFLOCK?

[Al Musella, DPM]

   I hate to say this, but if ALL session reads and writes should be 
locked, why can't cold fusion just do it for us automatically.  It's like a 
throwback to the old days when we had to worry about garbage collection and 
memory allocation.. if we wanted to do that we would write our web apps in c++.

   Al Musella
   a1webs.com



If you're doing something like this:

cfif IsDefined("Session.Foo")


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: verity and meta tags

[Susan McNab]

I thought that only the material within title and body tags is indexed with
the basic version of Verity available with CF. No?

 Is there a way to index META tags with CFindex?
 
 If you're indexing static pages, and those pages contain META tags, then
 you're indexing META tags. If you're dynamically generating the contents of
 META tags from a database query, you can index the contents of the pertinent
 database tables by building a query to retrieve all the tags, and indexing
 that query. If you want to ONLY index META tags, that's probably the route
 you'd take.
 

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Another CFHTTP challenge

[kraybill]

Can't quite figger this one out...

I have a page that uses one CFHTTP POST to do an automatic login to another site, and 
a 
second CFHTTP POST on the same page to pass parameters and request a secure page.

The login always succeeds but the second CFHTTP gets kicked right back to the login 
screen on the FIRST try -- if I've just restarted CF. On the second try, assuming I 
haven't restarted the CFServer, the login and page request BOTH work as desired.

Seems it must have something to do with the passing of CFID/CFTOKEN via cookies, but I 
could use some suggestions for further diagnosis/correction...

Thanks!

Gene Kraybill
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Testing Assignment

[Michael Dinowitz]

Just for fun and keeping on the topic of testing and such, I'm assigning a
test to the CF community. Lets say you have an IP address. (207.31.122.141)
This IP address can also be seen as a long binary number using dotless IP
addressing (3474946701). The way the internet works, either address will
work properly. Now using the search terms "dotless IP address binary
decimal", find the information on how to convert from a standard Ip to a
long binary IP. Once you have the information, write a module that takes an
IP address and converts it.
CF_DotlessIP IP="207.31.122.141"

I'm holding back from posting my tag result to the gallery so I can see what
others will try. If anyone wants the tag now without trying to do it
themselves, contact me off list.



--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: When should I use CFLOCK?

[Dave Watts]

 You should use CFLOCK when you are setting session
 variables to insure that you maintain consistency throughout
 your code.  Reading however, is not a problem.

Unfortunately, under high-volume usage, this may not be the case. If you're
reading a variable, and another request is changing it, your read might not
work out too well. You'd think that unless an application uses frames this
wouldn't be a problem, but you may run into odd problems with multi-threaded
browser requests or CFLOCATION wackiness.

The gist of this is that you should lock your reads with TYPE="READONLY".

Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
voice: (202) 797-5496
fax: (202) 797-5444

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: Testing Assignment

[Brandon Whitaker]

I'm holding back from posting my tag result to the gallery so I can see
what
others will try. If anyone wants the tag now without trying to do it
themselves, contact me off list.

Something like this?

cfSetting enableCFOutputOnly="yes"
cfScript
// 2 vars for tag:
//  ip = address to translate
//  variable = name of returned var
// ex. cf_dip ip="192.168.100.1" variable="thisIP"
// cfOutput#thisIP#/cfOutput
   ipArray = listToArray(attributes.ip,".");
   returnVar = 'caller.'  attributes.variable;
   returnIP =
(ipArray[1]*16777216)+(ipArray[2]*65536)+(ipArray[3]*256)+ipArray[4];
   '#returnVar#' = returnIP;
/cfScript
cfSetting enableCFOutputOnly="no"

Brandon Whitaker
[EMAIL PROTECTED]
---
"It'll get used by the same people using Opera.  People dressed in black
wearing berets."
- Dave Watts, on Mozilla

"It makes you feel so welcome to have a greeter like Papa Dave at the door.
Kind of like what Wal-Mart wishes it could do."
- John Allred, on Dave Watts

"The net interprets censorship as damage and routes around it."
- John Gilmore



--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: 401.3 Error in a secured area

[Mark Warrick]

You need to make sure that passwords can be sent in clear text in order for your 
server to work with the Netscape browser.

--
Mark Warrick
Phone: (714) 547-5386
Efax.com Fax: (801) 730-7289
Personal Email: [EMAIL PROTECTED]
Personal URL: http://www.warrick.net 
Business Email: [EMAIL PROTECTED]
Business URL: http://www.fusioneers.com
ICQ: 346566
--


 -Original Message-
 From: Robert Everland [mailto:[EMAIL PROTECTED]]
 Sent: Monday, July 10, 2000 9:13 AM
 To: '[EMAIL PROTECTED]'
 Subject: 401.3 Error in a secured area
 
 
   I secured and administrative section on my website, and to make it
 so netscape could get in there I did basic authentication using https. Now
 when I use Netscape I get this HTTP Error 401
 
 401.3 Unauthorized: Unauthorized due to ACL on resource
 
 This error indicates that the credentials passed by the client do not have
 access to the particular resource on the server. This resource could be
 either the page or file
 listed in the address line of the client, or it could be another 
 file on the
 server that is needed to process the file listed on the address 
 line of the
 client.
 
 Please make a note of the entire address you were trying to 
 access and then
 contact the Web server's administrator to verify that you have 
 permission to
 access the
 requested resource.
 
 Anyone know how to resolve this?
 
 
 Robert Everland III
 Web Developer
 Dixon Ticonderoga
 --
 
 Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
 To Unsubscribe visit 
 http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf
_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the 
body.

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebarRstsbodyRsts/cf_talk or send a message 
to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: Testing Assignment

[Jeremy Allen]

I know thats not exactly what you asked but its one way to do dotless IP's
:)
I realize some are HEX and some are long binary.
I got reply happy ;)

- Original Message -
From: Michael Dinowitz [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 10, 2000 1:11 PM
Subject: Testing Assignment


Just for fun and keeping on the topic of testing and such, I'm assigning a
test to the CF community. Lets say you have an IP address. (207.31.122.141)
This IP address can also be seen as a long binary number using dotless IP
addressing (3474946701). The way the internet works, either address will
work properly. Now using the search terms "dotless IP address binary
decimal", find the information on how to convert from a standard Ip to a
long binary IP. Once you have the information, write a module that takes an
IP address and converts it.
CF_DotlessIP IP="207.31.122.141"

I'm holding back from posting my tag result to the gallery so I can see what
others will try. If anyone wants the tag now without trying to do it
themselves, contact me off list.




--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: verity and meta tags

[Dave Watts]

 I thought that only the material within title and body tags
 is indexed with the basic version of Verity available with CF. No?

You are correct! I didn't know that, until I just tried it out. I don't
generally use it for static pages, and I made the assumption that it just
indexed the entire file. That's what happens when I make an assumption.

Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
voice: (202) 797-5496
fax: (202) 797-5444

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: Testing Assignment

[Michael Dinowitz]

They're hex addresses as well? I didn't know that. My solution was:

CFPARAM NAME="Attributes.IP" TYPE="String"
CFPARAM NAME="Attributes.IPName" DEFAULT="IP" TYPE="String"

CFSET SetVariable('caller.'attributes.ipname, (ListGetAt(Attributes.IP, 1,
'.')*16777216)+(ListGetAt(Attributes.IP, 2,
'.')*65536)+(ListGetAt(Attributes.IP, 3, '.')*256)+(ListGetAt(Attributes.IP,
4, '.')))

I'm going to write an extension to do hex returns as well. Thanks for the
info. :)

 G
 Sure sure trick us into writing your tag for you lol :)
 I wrote something like that in perl in about 10 minutes :P
 They are HEX addresses. So typing

 0xCF1F7A8D

 Pulss up 207.31.122.141

 its pretty east use a CFLIST with a period for a delimiter
 convert each list member to hex. assemble your
 new address.. Viola :) Hope I did not spoil
 the fun :)

 Jeremy

 - Original Message -
 From: Michael Dinowitz [EMAIL PROTECTED]
 To: [EMAIL PROTECTED]
 Sent: Monday, July 10, 2000 1:11 PM
 Subject: Testing Assignment


 Just for fun and keeping on the topic of testing and such, I'm assigning a
 test to the CF community. Lets say you have an IP address.
(207.31.122.141)
 This IP address can also be seen as a long binary number using dotless IP
 addressing (3474946701). The way the internet works, either address will
 work properly. Now using the search terms "dotless IP address binary
 decimal", find the information on how to convert from a standard Ip to a
 long binary IP. Once you have the information, write a module that takes
an
 IP address and converts it.
 CF_DotlessIP IP="207.31.122.141"

 I'm holding back from posting my tag result to the gallery so I can see
what
 others will try. If anyone wants the tag now without trying to do it
 themselves, contact me off list.



 --
--
 --
 Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
 To Unsubscribe visit
 http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
 send a message to [EMAIL PROTECTED] with 'unsubscribe' in
 the body.

 --

 Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
 To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: 401.3 Error in a secured area

[Robert Everland]

I did. It's using basic authentication which is why I put it under https so
that the passwords would be encrypted to the server.

Robert Everland III
Web Developer
Dixon Ticonderoga


-Original Message-
From: Mark Warrick [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 10, 2000 1:16 PM
To: [EMAIL PROTECTED]
Subject: RE: 401.3 Error in a secured area


You need to make sure that passwords can be sent in clear text in order for
your server to work with the Netscape browser.

--
Mark Warrick
Phone: (714) 547-5386
Efax.com Fax: (801) 730-7289
Personal Email: [EMAIL PROTECTED]
Personal URL: http://www.warrick.net 
Business Email: [EMAIL PROTECTED]
Business URL: http://www.fusioneers.com
ICQ: 346566
--


 -Original Message-
 From: Robert Everland [mailto:[EMAIL PROTECTED]]
 Sent: Monday, July 10, 2000 9:13 AM
 To: '[EMAIL PROTECTED]'
 Subject: 401.3 Error in a secured area
 
 
   I secured and administrative section on my website, and to make it
 so netscape could get in there I did basic authentication using https. Now
 when I use Netscape I get this HTTP Error 401
 
 401.3 Unauthorized: Unauthorized due to ACL on resource
 
 This error indicates that the credentials passed by the client do not have
 access to the particular resource on the server. This resource could be
 either the page or file
 listed in the address line of the client, or it could be another 
 file on the
 server that is needed to process the file listed on the address 
 line of the
 client.
 
 Please make a note of the entire address you were trying to 
 access and then
 contact the Web server's administrator to verify that you have 
 permission to
 access the
 requested resource.
 
 Anyone know how to resolve this?
 
 
 Robert Everland III
 Web Developer
 Dixon Ticonderoga
 --
 
 Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
 To Unsubscribe visit 
 http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf
_talk or send a message to [EMAIL PROTECTED] with
'unsubscribe' in the body.


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Checking zip codes against USPS

[Mark Warrick]

Yes, there are several custom tags that you could probably use to do this.  Or you 
could download the zip codes database from the UPSP and build something yourself.  
You're looking for the "Tiger/Zip" database which is updated each month by the USPS.  
If the USPS site wasn't so slow, I'd give you a link to the database.

You can read about the Tiger/Zip database here:
http://www.tpsnet.com/html/tigerzip-specs.html

You don't HAVE to buy this database from anyone although you might find it more 
convenient to do so.

---mark

--
Mark Warrick
Phone: (714) 547-5386
Efax.com Fax: (801) 730-7289
Personal Email: [EMAIL PROTECTED]
Personal URL: http://www.warrick.net 
Business Email: [EMAIL PROTECTED]
Business URL: http://www.fusioneers.com
ICQ: 346566
--


 -Original Message-
 From: Paul Sinclair [mailto:[EMAIL PROTECTED]]
 Sent: Friday, July 07, 2000 11:53 AM
 To: [EMAIL PROTECTED]
 Subject: Checking zip codes against USPS
 
 
 I've got a database that receives new addresses/zip codes from a 
 web form on
 a daily basis. I would like to eliminate addresses that have a 
 non-existent
 zip code. Is there some way to automate a function that will 
 verify the zip
 codes in the database against a USPS list of zip codes on a daily basis?
 
 Thank you for any suggestions.
 
 Paul Sinclair
 
 --
 
 Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
 To Unsubscribe visit 
 http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf
 _talk or send a message to [EMAIL PROTECTED] with 
 'unsubscribe' in the body.

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebarRstsbodyRsts/cf_talk or send a message 
to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: FW: oracle timestamps

[Stephen Garrett]

Yes, I agree completely. It also has the characteristic that the time
is that of the database server, not the webserver. In this example,
that may be a good or a bad thing if the person is updating/inserting
other types of dates into their tables.

We always use SP's for updates / inserts, and always reference the time
to the database machine, so as to remain consistent. I actually prefer
this method of encapsulation, but to each his/her own...

Steve

At 10:37 AM 7/10/2000 -0400, James Hancock wrote:
The oracle reserved word SYSDATE will achieve a current timestamp without
all the hassle of formatting.  

INSERT INTO DATA_TABLE(NAME, DATE)
VALUES ('#name#', SYSDATE)

j.

-Original Message-
From: Stephen Garrett [mailto:[EMAIL PROTECTED]] 
Sent: Friday, July 07, 2000 1:57 PM
To: [EMAIL PROTECTED]
Subject: RE: oracle  timestamps



The default syntax of the Oracle TimeStamps is set by the DBA. I always
use the TO_CHAR function on date stamps and format them the way I want
for display. (used in the SQL statement)

Steve

At 08:32 AM 7/7/2000 -0400, [EMAIL PROTECTED] wrote:
I would guess that the default Oracle date format on the two machines is
set
differently. Unfortunately a cursory search did not turn up info on
how/where this is set. 

-Original Message-
From: Mike Amburn [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 06, 2000 6:56 PM
To: Cf-Talk
Subject: oracle  timestamps


does anyone know why oracle would not accept timestamps?

when i try to insert Now() into a date/time field, oracle returns with the
error "illegal character". FYI, Now() outputs a timestamp like:
   {ts '/mm/dd hh24/mi/ss'}

stranger yet... all my queries work when i run the application locally on a
workstation with an ODBC connection out to the database. however, the
application refuses to work when i run the application locally on the
database.

the workstations are Win2000, CF 4.5.1 Ent, Oracle 8.1.6.0 ODBC driver
the server is WinNT SP6a, CF 4.5.1 Ent, Oracle 8.1.6.0 ODBC driver

ideas???

-mike

---
-
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.
---
---
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


--
Stephen Garrett
GPS
[EMAIL PROTECTED]   (360) 896-2714
ICQ# 10776767

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.
---
---
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


--
Stephen Garrett
GPS
[EMAIL PROTECTED]   (360) 896-2714
ICQ# 10776767
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: CFMODULE

[Billy Cravens]

I stand corrected.

-- 
Billy Cravens
[EMAIL PROTECTED]




Dave Watts wrote:
 
  Does CFMODULE have a closing tag so it works the same as CF_
  tags that require a closing tag?
 
 Sure:
 
 cfmodule name="foo"
 ...
 /cfmodule
 
 Dave Watts, CTO, Fig Leaf Software
 http://www.figleaf.com/
 voice: (202) 797-5496
 fax: (202) 797-5444
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Checking zip codes against USPS

[Robert Everland]

What is the address for those of us willing to wait.

Robert Everland III
Web Developer
Dixon Ticonderoga


-Original Message-
From: Mark Warrick [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 10, 2000 1:34 PM
To: [EMAIL PROTECTED]
Subject: RE: Checking zip codes against USPS


Yes, there are several custom tags that you could probably use to do this.
Or you could download the zip codes database from the UPSP and build
something yourself.  You're looking for the "Tiger/Zip" database which is
updated each month by the USPS.  If the USPS site wasn't so slow, I'd give
you a link to the database.

You can read about the Tiger/Zip database here:
http://www.tpsnet.com/html/tigerzip-specs.html

You don't HAVE to buy this database from anyone although you might find it
more convenient to do so.

---mark

--
Mark Warrick
Phone: (714) 547-5386
Efax.com Fax: (801) 730-7289
Personal Email: [EMAIL PROTECTED]
Personal URL: http://www.warrick.net 
Business Email: [EMAIL PROTECTED]
Business URL: http://www.fusioneers.com
ICQ: 346566
--


 -Original Message-
 From: Paul Sinclair [mailto:[EMAIL PROTECTED]]
 Sent: Friday, July 07, 2000 11:53 AM
 To: [EMAIL PROTECTED]
 Subject: Checking zip codes against USPS
 
 
 I've got a database that receives new addresses/zip codes from a 
 web form on
 a daily basis. I would like to eliminate addresses that have a 
 non-existent
 zip code. Is there some way to automate a function that will 
 verify the zip
 codes in the database against a USPS list of zip codes on a daily basis?
 
 Thank you for any suggestions.
 
 Paul Sinclair
 
 --
 
 Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
 To Unsubscribe visit 
 http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf
 _talk or send a message to [EMAIL PROTECTED] with 
 'unsubscribe' in the body.


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Testing Assignment

[Chris Evans]

Short and sweet, since I had a couple of minutes:

CFSET IP=Attributes.IP
CFSET Dotless = 0
CFSET Octets = ListLen(IP,".")
CFLOOP From="1" To="#Octets#" Index="i"
CFSET Dotless=Dotless + (ListGetAt(IP,i,".") * (256 ^ (Octets-i)))
/cfloop
CFSET Caller.Dotless=Dotless



Chris Evans
[EMAIL PROTECTED]
http://www.fuseware.com


-Original Message-
From: Michael Dinowitz [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 10, 2000 1:11 PM
To: [EMAIL PROTECTED]
Subject: Testing Assignment


Just for fun and keeping on the topic of testing and such, I'm assigning a
test to the CF community. Lets say you have an IP address. (207.31.122.141)
This IP address can also be seen as a long binary number using dotless IP
addressing (3474946701). The way the internet works, either address will
work properly. Now using the search terms "dotless IP address binary
decimal", find the information on how to convert from a standard Ip to a
long binary IP. Once you have the information, write a module that takes an
IP address and converts it.
CF_DotlessIP IP="207.31.122.141"

I'm holding back from posting my tag result to the gallery so I can see what
others will try. If anyone wants the tag now without trying to do it
themselves, contact me off list.




--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: cfregistry and basic security

[Dave Watts]

 In CF4.51 administrator, one can disable tags such as CFREGISTRY
 for security purposes.  There is also a setting for "unsecured
 tags directory" where these imposed tag restrictions should not
 apply. Why then can I not run scheduled tasks when CFREGISTRY is
 disabled. From its behavior, it would seem that the "unsecured tags
 directory" is not recursive. I see mention of this issue in the
 support forums, but no explanation or resolution. Does anyone know
 why this must be, or if there is some workaround?

You're correct; the only unsecured directory is the root directory of the CF
Administrator. I tried adding multiple directories to the Registry, but this
didn't work so well. I also tried moving the scheduler page into the same
directory, and it's got some CFINCLUDEs with absolute paths, so that didn't
work well either (and I was too lazy to dig further in that direction).

However, if you want a workaround, there is a way to do it. It's an annoying
way, but it'll work. You'll have to enable CFREGISTRY while you're
scheduling your task, then disable it when you're done.

Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
voice: (202) 797-5496
fax: (202) 797-5444

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Testing Assignment

[Chris Evans]

Well, if you want to hardcode it.  You'll have to re-code for IPv6 :).

Chris Evans
[EMAIL PROTECTED]
http://www.fuseware.com


-Original Message-
From: Brandon Whitaker [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 10, 2000 1:18 PM
To: [EMAIL PROTECTED]
Subject: Re: Testing Assignment


I'm holding back from posting my tag result to the gallery so I can see
what
others will try. If anyone wants the tag now without trying to do it
themselves, contact me off list.

Something like this?

cfSetting enableCFOutputOnly="yes"
cfScript
// 2 vars for tag:
//  ip = address to translate
//  variable = name of returned var
// ex. cf_dip ip="192.168.100.1" variable="thisIP"
// cfOutput#thisIP#/cfOutput
   ipArray = listToArray(attributes.ip,".");
   returnVar = 'caller.'  attributes.variable;
   returnIP =
(ipArray[1]*16777216)+(ipArray[2]*65536)+(ipArray[3]*256)+ipArray[4];
   '#returnVar#' = returnIP;
/cfScript
cfSetting enableCFOutputOnly="no"

Brandon Whitaker
[EMAIL PROTECTED]
---
"It'll get used by the same people using Opera.  People dressed in black
wearing berets."
- Dave Watts, on Mozilla

"It makes you feel so welcome to have a greeter like Papa Dave at the door.
Kind of like what Wal-Mart wishes it could do."
- John Allred, on Dave Watts

"The net interprets censorship as damage and routes around it."
- John Gilmore




--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: Testing Assignment

[Russel Madere]

Here is a real quicky I put together over lunch:

==  Start Code ==

cfparam name="Attributes.IP" default="0.0.0.0"

cfif ListLen(Attributes.IP, ".") NEQ 4 OR ListGetAt(Attributes.IP, "1", 
".") EQ 0

   !---
Error catching goes here.  A long cfif goes above to catch possible
errors in each octet of the IP address.  The current catching is very
rudimentary.
   ---

   cfset Error = "Bad IP address provided"

cfelse

   cfscript

 DotlessIP = (ListGetAt(Attributes.IP, "1", ".") * (256 ^ 3)) + 
(ListGetAt(Attributes.IP, "2", ".") * (256 ^ 2)) + 
(ListGetAt(Attributes.IP, "3", ".") * 256) + ListGetAt(Attributes.IP, "4", 
".");

   /cfscript

/cfif

cfif NOT isDefined("Error")
   cfset Caller.DotlessIP = DotlessIP
cfelse
   cfset Caller.DotlessIP = Error
/cfif

== End Code ===

Not very elegant, but it works.

Russel

At 01:11 PM 7/10/2000 -0400, you wrote:
[snip]

I'm holding back from posting my tag result to the gallery so I can see what
others will try. If anyone wants the tag now without trying to do it
themselves, contact me off list.



--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or 
send a message to [EMAIL PROTECTED] with 'unsubscribe' in 
the body.

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Testing Assignment

[Russel Madere]

Will IPv6 work with dotless IP addresses?

I haven't stayed up on it.

Russel

At 01:57 PM 7/10/2000 -0400, you wrote:
Well, if you want to hardcode it.  You'll have to re-code for IPv6 :).

Chris Evans
[EMAIL PROTECTED]
http://www.fuseware.com


-Original Message-
From: Brandon Whitaker [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 10, 2000 1:18 PM
To: [EMAIL PROTECTED]
Subject: Re: Testing Assignment


 I'm holding back from posting my tag result to the gallery so I can see
what
 others will try. If anyone wants the tag now without trying to do it
 themselves, contact me off list.

Something like this?

cfSetting enableCFOutputOnly="yes"
cfScript
// 2 vars for tag:
//  ip = address to translate
//  variable = name of returned var
// ex. cf_dip ip="192.168.100.1" variable="thisIP"
// cfOutput#thisIP#/cfOutput
ipArray = listToArray(attributes.ip,".");
returnVar = 'caller.'  attributes.variable;
returnIP =
(ipArray[1]*16777216)+(ipArray[2]*65536)+(ipArray[3]*256)+ipArray[4];
'#returnVar#' = returnIP;
/cfScript
cfSetting enableCFOutputOnly="no"

Brandon Whitaker
[EMAIL PROTECTED]
---
"It'll get used by the same people using Opera.  People dressed in black
wearing berets."
- Dave Watts, on Mozilla

"It makes you feel so welcome to have a greeter like Papa Dave at the door.
Kind of like what Wal-Mart wishes it could do."
- John Allred, on Dave Watts

"The net interprets censorship as damage and routes around it."
- John Gilmore




--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or 
send a message to [EMAIL PROTECTED] with 'unsubscribe' in 
the body.

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: Testing Assignment

[Russel Madere]

Please excuse the wrapping imposed by Eudora...

At 12:52 PM 7/10/2000 -0500, you wrote:
Here is a real quicky I put together over lunch:

==  Start Code ==

cfparam name="Attributes.IP" default="0.0.0.0"

cfif ListLen(Attributes.IP, ".") NEQ 4 OR ListGetAt(Attributes.IP, "1",
".") EQ 0

!---
 Error catching goes here.  A long cfif goes above to catch possible
 errors in each octet of the IP address.  The current catching is very
 rudimentary.
---

cfset Error = "Bad IP address provided"

cfelse

cfscript

  DotlessIP = (ListGetAt(Attributes.IP, "1", ".") * (256 ^ 3)) +
(ListGetAt(Attributes.IP, "2", ".") * (256 ^ 2)) +
(ListGetAt(Attributes.IP, "3", ".") * 256) + ListGetAt(Attributes.IP, "4",
".");

/cfscript

/cfif

cfif NOT isDefined("Error")
cfset Caller.DotlessIP = DotlessIP
cfelse
cfset Caller.DotlessIP = Error
/cfif

== End Code ===
[snip]

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Stored Procedure Help

[KChapman]

This is my first time working with a stored procedure and I'm not sure that
I'm doing it right.

I can get the procedure to run but I can't get the values to display.  What
am I missing

!-- cfcode --

CFSTOREDPROC PROCEDURE="p_pricing_pipeline"
DATASOURCE="#application.datasource#"

 CFPROCPARAM TYPE="IN"
VARIABLE="broker_id"
DBVARNAME="@broker_id"
VALUE="112"
CFSQLTYPE="CF_SQL_INTEGER"

 CFPROCRESULT NAME="test"

/cfstoredproc

cfoutput
!#prequal_num#! - !#borrower_lastname#! - !#highest_status#! - !
#comment_exists#!br
/cfoutput

!--Stored Procedure--

SET QUOTED_IDENTIFIER  OFFSET ANSI_NULLS  ON
GO


--
-- Given a broker, find data for its most recent 5 prequals.
--
-- DateAuthor Change
-- 07/07/00 D Noble Created.
--
create procedure dbo.p_Pricing_Pipeline (
 @broker_id int
)
as

set nocount on

create table #prequal (
 prequal_num int not null
,borrower_lastname varchar(96) null
)

insert #prequal
select top 5
 prequal_num
,borrower_lastname
from prequal
where broker_id = @broker_id
order by prequal_num desc

create table #half_results (
 prequal_num int not null
,borrower_lastname varchar(96) null
,loan_status_rank tinyint null
,number_of_comments int null
)

insert #half_results
select
 p.prequal_num
,p.borrower_lastname
,min(ls.loan_status_rank)
--,sum(isnull(c.prequal_num,0))
,sum(
 case
 when c.prequal_num is null then 0
 else 1 end
)

from
#prequal p
join scenario s on p.prequal_num = s.prequal_num
join loanstatus ls on s.loan_status_id = ls.loan_status_id
left join comment c on p.prequal_num = c.prequal_num

group by
 p.prequal_num
,p.borrower_lastname

select
 prequal_num as prequal_num
,borrower_lastname as borrower_lastname
,loan_status_rank as highest_status
,case number_of_comments
 when 0 then 0
 else 1 end as comment_exists
from #half_results

drop table #prequal
drop table #half_results

return 0


GO
SET QUOTED_IDENTIFIER  OFFSET ANSI_NULLS  ON
GO

TIA,
--K


Katrina Chapman
Consultant
Ameriquest Mortgage

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Writing to .txt file

[Dave Hannum]

Hello,

I'm writing a query to a text file using CFX_Dumptext.  I am retrieving the
file via CFCONTENT.  Here is my quesion.  When the file comes back to the
browser as a downloadable, it comes back named script.cfm (script being the
name of my script that is running) vs. file.txt (file being what I name the
file).  Why is this?

TIA
Dave


=
"What we need is a list of specific unknown problems we will encounter"

David Hannum
Web Analyst/Programmer
Ohio University
[EMAIL PROTECTED]
(740) 597-2524




--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: Testing Assignment

[Jeremy Allen]

IPv6 will ahve addresses like so
00:AA:BB:CC:DD:EE:FF

6 128Bit parts to it.. thus giving us some insane
address space that is like ~150 Ip's / square foot on
earth :) In a word yes these lil tricks should work :)
but thats why we have DNS to abstract us from
the entire IP layer of networking :)


- Original Message -
From: Russel Madere [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 10, 2000 1:54 PM
Subject: RE: Testing Assignment


Will IPv6 work with dotless IP addresses?

I haven't stayed up on it.

Russel

At 01:57 PM 7/10/2000 -0400, you wrote:
Well, if you want to hardcode it.  You'll have to re-code for IPv6 :).

Chris Evans
[EMAIL PROTECTED]
http://www.fuseware.com


-Original Message-
From: Brandon Whitaker [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 10, 2000 1:18 PM
To: [EMAIL PROTECTED]
Subject: Re: Testing Assignment


 I'm holding back from posting my tag result to the gallery so I can see
what
 others will try. If anyone wants the tag now without trying to do it
 themselves, contact me off list.

Something like this?

cfSetting enableCFOutputOnly="yes"
cfScript
// 2 vars for tag:
//  ip = address to translate
//  variable = name of returned var
// ex. cf_dip ip="192.168.100.1" variable="thisIP"
// cfOutput#thisIP#/cfOutput
ipArray = listToArray(attributes.ip,".");
returnVar = 'caller.'  attributes.variable;
returnIP =
(ipArray[1]*16777216)+(ipArray[2]*65536)+(ipArray[3]*256)+ipArray[4];
'#returnVar#' = returnIP;
/cfScript
cfSetting enableCFOutputOnly="no"

Brandon Whitaker
[EMAIL PROTECTED]
---
"It'll get used by the same people using Opera.  People dressed in black
wearing berets."
- Dave Watts, on Mozilla

"It makes you feel so welcome to have a greeter like Papa Dave at the door.
Kind of like what Wal-Mart wishes it could do."
- John Allred, on Dave Watts

"The net interprets censorship as damage and routes around it."
- John Gilmore



---
-
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


---
---
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Difference between v3.5 and v4.5

[Daslweb - Greg]

Looking for a list of differences between
tags for Cold Fusion Server v3.5 and v4.5
 

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

rds

[Jason Egan]

I had to set up a new nt box (win 2k) -- when trying to open or create
projects in studio 4.5 instead of the rds in the location box coming up as
rds:... bla... bla... it is just the final directory name.

Any ideas?

Thanks,
je

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Spaces

[Marc Lippman]

-Original Message-
From: Melanie Gann [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 07, 2000 3:22 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: RE: Spaces

My case is slightly different but the same problem.
The Novell server does not understand space chars and says
"The server cannot understand the message you sent".
So I'm trying to get rid of the spaces and out them back in another
page.

I've tried

CFSET Title= #REPLACE(Title," ","_","ALL")#
CFSET Title= #REPLACE(Title,"","_","ALL")#
CFSET Title= #REPLACE(#Title#," ","_","ALL")#

and numerous others too.

What is the hex value for space?

This seems too obvious to not work.but I'm having the same problem.

Regards,
Melanie

At 08:31 AM 7/7/00 -0500, Chris Terrebonne wrote:
Replace(CompanyName, " ", "", "ALL")

Specify the space, then the null (""), then ALL.

Chris
--
Original Message
From: "Larry Juncker"[EMAIL PROTECTED]
Subject: RE: Spaces
Date: Fri, 7 Jul 2000 07:41:01 -0500

Kevin;

I believe that you have to type all inside your last pair of quotes in
order
to replace ALL of the spaces.

Your code should like this:

#Replace(CompanyName, " ", "ALL")#

Hope this helps

H   Larry Juncker
 L  Senior Cold Fusion Programmer
  I Heartland Communications Group
  Internet Division

-Original Message-
From: Parker, Kevin [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 06, 2000 8:36 PM
To: CF Talk (E-mail)
Subject: Spaces


I'm trying to strip blank spaces from inside a string but am having no
luck.
I tried this but no joy.

#Replace(CompanyName, " ", "")#

Any clues please?


Kevin Parker
Service and Communication
WorkCover Corporation

[EMAIL PROTECTED]

ph:  +61 8 82332548
fax: +61 8 82332000





**
*
*
This e-mail is intended for the use of the addressee only. It may contain
information that is protected by legislated confidentiality and/or is
legally privileged. If you are not the intended recipient you are
prohibited
from disseminating, distributing or copying this e-mail. Any opinion
expressed in this e-mail may not necessarily be that of the WorkCover
Corporation of South Australia. Although precautions have been taken, the
sender cannot warrant that this e-mail or any files transmitted with it
are
free of viruses or any other defect.
If you have received this e-mail in error, please notify the sender
immediately by return e-mail and destroy the original e-mail and any
copies.
**
*
*
--
-
-
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


--
-
---
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


_
Free email with personality! Over 200 domains!
http://www.MyOwnEmail.com

---
---
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.

Melanie Gann
Second Street Web Design
www.second-street.com


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Force database connections to close....

[joeug]

Hello all,
  It looks like CF doesnt like to release the
data brought down, which hogs up on the memory.

Is there a way to force the database connection to close or to
release memory as data is dumped to the client..???

some like connection.close()

This would really be a powerful feature to have...

Any ideas

Thanks
Joe

-
Sent using MailStart.com ( http://MailStart.Com/welcome.html )
The FREE way to access your mailbox via any web browser, anywhere!

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Salt Lake City ColdFusion User Group July Meeting

[Scott P. Heffron]

Here is the information for our next meeting.  Please RSVP  to
[EMAIL PROTECTED] so that we can get a correct count for
refreshments.

Our next meeting will take place on: Thursday, July 13, 2000 from 6:30 PM to
8:00 PM.

Speaker: Kao Martin, Web Developer
Company: Infovision Inc
Phone: 801-825-6558
Email: [EMAIL PROTECTED]
Topic: Implementing Session Management on a Clustered Environment

Session management is crucial to personalized, interactive web sites, and
E-commerce. However, most web server technologies do not support session
management in a clustered multi-server environment. We will examine the use
of WDDX to solve these session management problem.

Location:
GE Capital
4246 S. Riverboat Rd.
Salt Lake City, UT 84123

Agenda:
6:30PM - 6:45PM  Give users an opportunity to do some networking
6:45 - 7:45PM  Lecture on Session Management in a Cluster
7:45PM - 8:00PM QA


Refreshments will be provided by Infovision Inc.

Thanks,
Scott P. Heffron
Email: [EMAIL PROTECTED]
Web Site: http://www.infovisioninc.com

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Sort many tables Problem!

[Frank Mamone]

We have several tables containing articles for our Intranet. What we want to
do is output one list with all the articles sorted by date regardless of
what table they came from.

Right now we are grouping them and adding a header on the display page for
each group. We want to get rid of the headers and produce one list.

Any ideas?



--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Know where I can find Chr(*) definitions?

[Bert Dawson]

 That doesn't help much with Tab, ESC, or DLE (data link 
 escape - CHR(16).


No, I know.nevermind
;)
This is quite handy for working out the other way round, though again it
doesn't work with everything:

TEXTAREA ONKEYPRESS="alert(event.keyCode)"hit a key/TEXTAREA

(works on IE5, not sure what else...)

Bert

 It's a good reference for printable characters, though.
 
 Chris Evans
 [EMAIL PROTECTED]
 http://www.fuseware.com
 
 
 -Original Message-
 From: Bert Dawson [mailto:[EMAIL PROTECTED]]
 Sent: Monday, July 10, 2000 10:04 AM
 To: '[EMAIL PROTECTED]'
 Subject: RE: Know where I can find Chr(*) definitions?
 
 
 TEXTAREA ROWS="20"
 CFOUTPUT
 CFLOOP INDEX="i" FROM="1" TO="255"
 #i# = #chr(i)#
 /CFLOOP
 /CFOUTPUT
 /TEXTAREA
 
 Bert
 
  -Original Message-
  From: GE [mailto:[EMAIL PROTECTED]]
  Sent: 07 July 2000 18:44
  To: [EMAIL PROTECTED]
  Subject: Re: Know where I can find Chr(*) definitions?
 
 
  Hello Ric,
 
  What you are looking for is an ASCII table. A quick search
  should find one for you - or you could look it up in any
  refernce manual you have on programming (should be one in one of
  them). To be sure you have found what you are looking for
  just compare the table values of 10 and 13 to verify that you
  have a carraige return and a line feed.
 
  hth,
  Nelson
 
 
  Ric Smith wrote:
 
   Anyone know of anywhere I can find the definition
   for the Chr(*) stuff online? Only ones I know are
   Chr(10) and Chr(13).
  
   Just curious, thanks.
  
   Ric Smith
  
  
  --
  
   Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
   To Unsubscribe visit
  http://www.houseoffusion.com/index.cfm?sidebar=listsbody=list
 s/cf_talk or send a message to [EMAIL PROTECTED] with
 'unsubscribe' in the body.
 
 --
 --
 --
 Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
 To Unsubscribe visit
 http://www.houseoffusion.com/index.cfm?sidebar=listsbody=list
s/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.



--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Stored Procedure Help

[mherbene]

Just like a cfquery, you need to reference the query:

cfoutput query="test"
!#prequal_num#! - !#borrower_lastname#! - !#highest_status#! - !
#comment_exists#!br
/cfoutput

or 

cfoutput
!#test.prequal_num#! - !#test.borrower_lastname#! - !#test.highest_status#!
- !
#test.comment_exists#!br
/cfoutput


-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 10, 2000 2:07 PM
To: [EMAIL PROTECTED]
Subject: Stored Procedure Help


This is my first time working with a stored procedure and I'm not sure that
I'm doing it right.

I can get the procedure to run but I can't get the values to display.  What
am I missing

!-- cfcode --

CFSTOREDPROC PROCEDURE="p_pricing_pipeline"
DATASOURCE="#application.datasource#"

 CFPROCPARAM TYPE="IN"
VARIABLE="broker_id"
DBVARNAME="@broker_id"
VALUE="112"
CFSQLTYPE="CF_SQL_INTEGER"

 CFPROCRESULT NAME="test"

/cfstoredproc

cfoutput
!#prequal_num#! - !#borrower_lastname#! - !#highest_status#! - !
#comment_exists#!br
/cfoutput

!--Stored Procedure--

SET QUOTED_IDENTIFIER  OFFSET ANSI_NULLS  ON
GO



--
-- Given a broker, find data for its most recent 5 prequals.
--
-- DateAuthor Change
-- 07/07/00 D Noble Created.

--
create procedure dbo.p_Pricing_Pipeline (
 @broker_id int
)
as

set nocount on

create table #prequal (
 prequal_num int not null
,borrower_lastname varchar(96) null
)

insert #prequal
select top 5
 prequal_num
,borrower_lastname
from prequal
where broker_id = @broker_id
order by prequal_num desc

create table #half_results (
 prequal_num int not null
,borrower_lastname varchar(96) null
,loan_status_rank tinyint null
,number_of_comments int null
)

insert #half_results
select
 p.prequal_num
,p.borrower_lastname
,min(ls.loan_status_rank)
--,sum(isnull(c.prequal_num,0))
,sum(
 case
 when c.prequal_num is null then 0
 else 1 end
)

from
#prequal p
join scenario s on p.prequal_num = s.prequal_num
join loanstatus ls on s.loan_status_id = ls.loan_status_id
left join comment c on p.prequal_num = c.prequal_num

group by
 p.prequal_num
,p.borrower_lastname

select
 prequal_num as prequal_num
,borrower_lastname as borrower_lastname
,loan_status_rank as highest_status
,case number_of_comments
 when 0 then 0
 else 1 end as comment_exists
from #half_results

drop table #prequal
drop table #half_results

return 0


GO
SET QUOTED_IDENTIFIER  OFFSET ANSI_NULLS  ON
GO

TIA,
--K


Katrina Chapman
Consultant
Ameriquest Mortgage


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Testing Assignment

[Dan Haley]

Hey, that was more fun than work!

Thoughts for future versions . . . reverse (dotless to dotted), octal
addresses, hexadecimal addresses, combinations of hex, octal and dotted,
masked ip addresses with multiples of 256 added to a dotted IP or multiples
of 4294967296 added to dotless IPs.

I didn't know any of these existed until now!  I found out about it from
http://www.nwi.net/~pchelp/obscure.htm.

Wonder if the list is down?  Or just quiet because everyone is working on
this . . . haha.

Dan

-Original Message-
From: Michael Dinowitz [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 10, 2000 10:11 AM
To: [EMAIL PROTECTED]
Subject: Testing Assignment


Just for fun and keeping on the topic of testing and such, I'm assigning a
test to the CF community. Lets say you have an IP address. (207.31.122.141)
This IP address can also be seen as a long binary number using dotless IP
addressing (3474946701). The way the internet works, either address will
work properly. Now using the search terms "dotless IP address binary
decimal", find the information on how to convert from a standard Ip to a
long binary IP. Once you have the information, write a module that takes an
IP address and converts it.
CF_DotlessIP IP="207.31.122.141"

I'm holding back from posting my tag result to the gallery so I can see what
others will try. If anyone wants the tag now without trying to do it
themselves, contact me off list.




--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: OLEDB Date type

[Mark Zukiwsky]

 Im trying to convert some existing access apps from using ODBC
 to OLEDB, only theres an issue with the ODBC date format ( {ts
 '2000-07-06 14:34:00} ). How do I properly escape/format a date/time
 value in an OLEDB query?

Last year I did a ODBC to OLE conversion for an Access '97 database 
and posted some caveats to the list on my experience. This portion of 
the original post deals with the dates. I basically figured it out by 
trial and error.

Dates with Access  OLE
-

Since I couldn't pass ODBC dates, I used something like:

  cfset DateTimeStamp = DateFormat(now(), "MM/DD/")  " "  
TimeFormat(now(), "h:mm:ss tt")

To pass the variable in an SQL statement:

  Values(#widget_ID_number#, '#widget_name#', '#DateTimeStamp#')

It was pointed out to me that you could also pass the date using the 
Access date() and time() functions in an SQL statement, so I now use:

  Values(#widget_ID_number#, '#widget_name#', Date()  ' '  Time())

In Access you need to set the default for the field to "=now()".

So, for easy date entry in Access 97 using OLE, simply use the date() 
function in your SQL statements. I think this also applies to SQL 
Server  OLE using the getDate() function.

To use a form date in an SQL query:

   cfif FORM.DateStart IS NOT ""
 cfset startDate = DateFormat(FORM.DateStart,'DD/MM/')
 AND (A.testCompDate = DateValue(#DE(startDate)#))
   /cfif

Using the date in SQL search queries I recall that Access was 
particluar about the date format, but I can't remember the details. 
The DD/MM/ format worked for me, so I'm guessing that perhaps it 
was the date format MM/DD/ that didn't work.

Hope this helps.

Mark Zukiwsky
Edmonton, Canda

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: Testing Assignment

[Michael Dinowitz]

I think that we should take all the options that you and others have
mentioned and make a single CF_IP that will have options for them all. Make
it a 'group project' with myself or someone else as the primary caretaker (a
la open source software).

 Hey, that was more fun than work!

 Thoughts for future versions . . . reverse (dotless to dotted), octal
 addresses, hexadecimal addresses, combinations of hex, octal and dotted,
 masked ip addresses with multiples of 256 added to a dotted IP or
multiples
 of 4294967296 added to dotless IPs.

 I didn't know any of these existed until now!  I found out about it from
 http://www.nwi.net/~pchelp/obscure.htm.

 Wonder if the list is down?  Or just quiet because everyone is working on
 this . . . haha.

 Dan

 -Original Message-
 From: Michael Dinowitz [mailto:[EMAIL PROTECTED]]
 Sent: Monday, July 10, 2000 10:11 AM
 To: [EMAIL PROTECTED]
 Subject: Testing Assignment


 Just for fun and keeping on the topic of testing and such, I'm assigning a
 test to the CF community. Lets say you have an IP address.
(207.31.122.141)
 This IP address can also be seen as a long binary number using dotless IP
 addressing (3474946701). The way the internet works, either address will
 work properly. Now using the search terms "dotless IP address binary
 decimal", find the information on how to convert from a standard Ip to a
 long binary IP. Once you have the information, write a module that takes
an
 IP address and converts it.
 CF_DotlessIP IP="207.31.122.141"

 I'm holding back from posting my tag result to the gallery so I can see
what
 others will try. If anyone wants the tag now without trying to do it
 themselves, contact me off list.



 --
--
 --
 Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
 To Unsubscribe visit
 http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
 send a message to [EMAIL PROTECTED] with 'unsubscribe' in
 the body.
 --

 Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
 To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

CFSCRIPT Question

[Robert Everland]

Can I use cflocation in a cfscript or it onlu does if then else and loops.

Robert Everland III
Web Developer
Dixon Ticonderoga
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Sorting an Array

[Johnson, Dana]

Hello All:


Need help on sorting an query


I have a query that has two fields field 1, field 2 
field 1 is a varchar
field 2 is a varchar

field 1 however has numeric data i.e. 0 through 100

I must sort on field 1 and output on field 2

here is the current query



CFQUERY NAME="CONS4"  datasource="CLINKSTEST"
SELECT 
t700_parallelprof.* 
FROM (t110_headerecseg 
LEFT JOIN t700_parallelprof ON t110_headerecseg.rqstid =
t700_parallelprof.rqstid)
WHERE (t110_headerecseg.rqstid = '#TEMP#')
/CFQUERY
 !--- Declare the array ---
CFSET aCONS4=ArrayNew(2)

!--- Populate the array row by row ---
CFLOOP QUERY="CONS4"
CFSET aCONS4[CurrentRow][1]=val(CONS4.prevtableptr[CurrentRow])
CFSET aCONS4[CurrentRow][2]=CONS4.reporttext[CurrentRow]
/CFLOOP
!---loop to output the array contents ---
CFSET Total_Records= CONS4.RecordCount
 
CFLOOP INDEX="Counter" FROM=1 TO="#Total_Records#"

CFOUTPUT 
#trim(aCONS4[Counter][1])#  nbsp;nbsp; is this field numeric::
#isnumeric(aCONS4[Counter][1])#

PRE
#StripCR(aCONS4[Counter][1])#nbsp!--- ;nbsp;#StripCR(aCONS4[Counter][2])#
---
/PRE
/CFOUTPUT
/CFLOOP 


Any help would be greatly appreciated
winNT 4.0
CF 4.5.1
iis4

Dana E. Johnson
Sr. Web Developer
CIT
VTF/Technology Financing Services
[EMAIL PROTECTED]
(904) 620-7458
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

good simple web board been done?

[Jeff Fongemie]

Hey everyone,

I'm looking for a good, simple web bulletin board where users can post
messages and replies that does not require users to create an account, and
is not a "drill-down" type application. Client wants a greats topics and
replies to be a great big list like the old cgi types (Mats Scripts).

Thanks,

Jeff


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: CFSCRIPT Question

[Zachary Bedell]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

You can't use any kind of tag in cfscript.  4.5 finally has support
for creating objects in script instead of with CFObject, but that's
about the best you can do so far.  I do hope Allaire makes the rest
of CF's functionality accessible from script soon!

(I know Dixon isn't actually in Ticonderoga any more, but I grew up
there.  It's neat to see the name again...)

Best regards,
Zac Bedell

 -Original Message-
 From: Robert Everland [mailto:[EMAIL PROTECTED]]
 Sent: Monday, July 10, 2000 3:37 PM
 To: '[EMAIL PROTECTED]'
 Subject: CFSCRIPT Question
 
 
 Can I use cflocation in a cfscript or it only does if then 
 else and loops.
 
 Robert Everland III
 Web Developer
 Dixon Ticonderoga

-BEGIN PGP SIGNATURE-
Version: PGPfreeware 6.5.3 for non-commercial use http://www.pgp.com
Comment: Please use PGP!!!

iQA/AwUBOWooPwraVoMWBwRBEQJjZQCfTgVngfemtyF+htO1L08b+seBu9YAoL7K
qpQjPmGtbZDvdW5dwVqhnlii
=NbeT
-END PGP SIGNATURE-
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: Advanced Security

[Sean Renet]

Those services are not running.  When I try to manually start them I get the
following error.

Could not start the SiteMinder Authorization Services on Local Computer
The service did not return an error.  This could be an internal Windows
error or an internal service error

Any guesses?
- Original Message -
From: "Raymond K. Camden" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 10, 2000 5:06 AM
Subject: RE: Advanced Security


 Check to make sure the advanced security services are running. Theres two
of
 them, SiteMinder Authorization and SiteMinder Authentication.

 ===
 Raymond Camden, Cold Fusion Jedi Master for Syntegra (www.syntegra.com)
 Allaire Certified Instructor and Member of Team Allaire

 Email   : [EMAIL PROTECTED]
 ICQ UIN : 3679482

 "My ally is the Force, and a powerful ally it is." - Yoda


  -Original Message-
  From: Sean Renet [mailto:[EMAIL PROTECTED]]
  Sent: Monday, July 10, 2000 2:45 AM
  To: [EMAIL PROTECTED]
  Subject: Advanced Security
 
 
  Anyone ever install CF Server, go into the administrator, click on the
  advanced security link and get this:
 
Error Diagnostic Information
Security Policy Administration
 
Security Policy Administration is not available.
 
 
 
  I check the advanced security option on installation like usual.  I have
  never gotten this error before
 
  --
  
  Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
  To Unsubscribe visit
  http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf
 _talk or send a message to [EMAIL PROTECTED] with
 'unsubscribe' in the body.

 --

 Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
 To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

(WOT): Visual Basic, Access, and opening a FileOpen dialog

[Eric Dawson]

I ain't no VB guy, as evidenced by this OT post. But I want to create a 
module that proppts the user for a file and performs a dataconversion 
process. I am using Access, but can't remember (don't think I ever knew) how 
to open a file browse dialog so the user can select the appropriate file.


Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: good simple web board been done?

[Sean Renet]

I can give you code for a simple one if you want. It's written in fusebox.
It was one of the first things I built so its not all that cool. but it
sounds like what you are looking for.  If nothing else it will give you an
idea where to start and it would be free.

I think my brother put it on the site he is starting to build for fun. you
can check it out at
www.benet.ws

- Original Message -
From: "Jeff Fongemie" [EMAIL PROTECTED]
To: "Cf-Talk" [EMAIL PROTECTED]
Sent: Monday, July 10, 2000 12:52 PM
Subject: good simple web board been done?


 Hey everyone,

 I'm looking for a good, simple web bulletin board where users can post
 messages and replies that does not require users to create an account, and
 is not a "drill-down" type application. Client wants a greats topics and
 replies to be a great big list like the old cgi types (Mats Scripts).

 Thanks,

 Jeff


 --

 Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
 To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

IIf() and DE confusion

[Jim McAtee]

I know this can be done, but I'll be hanged if I can figure out the right
combination of DE() and ## and quotes and whatever else might be needed.
I'm trying to use IIf() in a SQL statement instead of the following:

thedate = cfif
IsDate(form.thedate)#CreateODBCDate(form.thedate)#cfelseNULL/cfif

Thanks,
Jim


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: Testing Assignment

[Howie Hamlin]

While you're at it some additional functions would be neat.  For example,
testing whether a given IP address is within a range.  For example, is
123.123.123.123 in the set of *.1??.???.*

Regards,

Howie

- Original Message -
From: Michael Dinowitz [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 10, 2000 3:42 PM
Subject: Re: Testing Assignment


 I think that we should take all the options that you and others have
 mentioned and make a single CF_IP that will have options for them all.
Make
 it a 'group project' with myself or someone else as the primary caretaker
(a
 la open source software).

  Hey, that was more fun than work!
 
  Thoughts for future versions . . . reverse (dotless to dotted), octal
  addresses, hexadecimal addresses, combinations of hex, octal and dotted,
  masked ip addresses with multiples of 256 added to a dotted IP or
 multiples
  of 4294967296 added to dotless IPs.
 
  I didn't know any of these existed until now!  I found out about it from
  http://www.nwi.net/~pchelp/obscure.htm.
 
  Wonder if the list is down?  Or just quiet because everyone is working
on
  this . . . haha.
 
  Dan
 
  -Original Message-
  From: Michael Dinowitz [mailto:[EMAIL PROTECTED]]
  Sent: Monday, July 10, 2000 10:11 AM
  To: [EMAIL PROTECTED]
  Subject: Testing Assignment
 
 
  Just for fun and keeping on the topic of testing and such, I'm assigning
a
  test to the CF community. Lets say you have an IP address.
 (207.31.122.141)
  This IP address can also be seen as a long binary number using dotless
IP
  addressing (3474946701). The way the internet works, either address will
  work properly. Now using the search terms "dotless IP address binary
  decimal", find the information on how to convert from a standard Ip to a
  long binary IP. Once you have the information, write a module that takes
 an
  IP address and converts it.
  CF_DotlessIP IP="207.31.122.141"
 
  I'm holding back from posting my tag result to the gallery so I can see
 what
  others will try. If anyone wants the tag now without trying to do it
  themselves, contact me off list.
 
 
 

 --
 --
  --
  Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
  To Unsubscribe visit
  http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk
or
  send a message to [EMAIL PROTECTED] with 'unsubscribe'
in
  the body.

 --
 
  Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
  To Unsubscribe visit
 http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
 send a message to [EMAIL PROTECTED] with 'unsubscribe' in
 the body.
 

 --

 Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
 To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: IIf() and DE confusion

[Bryan Batchelder]

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

--_=_NextPart_001_01BFEAAC.DB4262B0
Content-Type: text/plain;
charset="iso-8859-1"

shouldn't this work?:

iif(IsDate(form.thedate), DE(#CreateODBCDate(form.thedate)#), DE(""))

--b

p.s.  if you ever think you have it badhere is an iif that took a few
hours of my time and about 15 minutes of a colleagues:

iif(query.red_flag[rowNbr], DE(caller.pqa  '/redflag.gif'),
iif(query.close_flag[rowNbr], ""DE(iif(query.won_flag[rowNbr], DE(caller.pqa
 '/thumbs_up.gif'), DE(caller.pqa  '/thumbs_down.gif')))"",
""DE(caller.pqa  '/transpix.gif')""))

Laterz.


Bryan D. Batchelder   Work: 813-935-7100
Palm/Internet Developer   Home: 727-547-1322

ConnectWise, Inc. (www.ConnectWise.com)
2803 West Busch Blvd, Suite 204
Tampa, FL 33618


-Original Message-
From: Jim McAtee [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 10, 2000 4:15 PM
To: [EMAIL PROTECTED]
Subject: IIf() and DE confusion


I know this can be done, but I'll be hanged if I can figure out the right
combination of DE() and ## and quotes and whatever else might be needed.
I'm trying to use IIf() in a SQL statement instead of the following:

thedate = cfif
IsDate(form.thedate)#CreateODBCDate(form.thedate)#cfelseNULL/cfif

Thanks,
Jim



--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.

--_=_NextPart_001_01BFEAAC.DB4262B0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN"
HTML
HEAD
META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1"
META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2650.12"
TITLERE: IIf() and DE confusion/TITLE
/HEAD
BODY

PFONT SIZE=3D2shouldn't this work?:/FONT
/P

PFONT SIZE=3D2iif(IsDate(form.thedate), =
DE(#CreateODBCDate(form.thedate)#), DE(quot;quot;))/FONT
/P

PFONT SIZE=3D2--b/FONT
/P

PFONT SIZE=3D2p.s.nbsp; if you ever think you have it badhere =
is an iif that took a few hours of my time and about 15 minutes of a =
colleagues:/FONT/P

PFONT SIZE=3D2iif(query.red_flag[rowNbr], DE(caller.pqa amp; =
'/redflag.gif'), iif(query.close_flag[rowNbr], =
quot;quot;DE(iif(query.won_flag[rowNbr], DE(caller.pqa amp; =
'/thumbs_up.gif'), DE(caller.pqa amp; =
'/thumbs_down.gif')))quot;quot;, quot;quot;DE(caller.pqa amp; =
'/transpix.gif')quot;quot;))/FONT/P

PFONT SIZE=3D2Laterz./FONT
/P

PFONT SIZE=3D2/FONT
BRFONT SIZE=3D2Bryan D. =
Batcheldernbsp;nbsp;nbsp;nbsp;nbsp;nbsp; Work: =
813-935-7100/FONT
BRFONT SIZE=3D2Palm/Internet Developernbsp;nbsp; Home: =
727-547-1322/FONT
BRFONT SIZE=3D2/FONT
BRFONT SIZE=3D2ConnectWise, Inc. (www.ConnectWise.com)/FONT
BRFONT SIZE=3D22803 West Busch Blvd, Suite 204/FONT
BRFONT SIZE=3D2Tampa, FL 33618/FONT
BRFONT SIZE=3D2/FONT
/P

PFONT SIZE=3D2-Original Message-/FONT
BRFONT SIZE=3D2From: Jim McAtee [A =
HREF=3D"mailto:[EMAIL PROTECTED]"mailto:[EMAIL PROTECTED]=
/A]/FONT
BRFONT SIZE=3D2Sent: Monday, July 10, 2000 4:15 PM/FONT
BRFONT SIZE=3D2To: [EMAIL PROTECTED]/FONT
BRFONT SIZE=3D2Subject: IIf() and DE confusion/FONT
/P
BR

PFONT SIZE=3D2I know this can be done, but I'll be hanged if I can =
figure out the right/FONT
BRFONT SIZE=3D2combination of DE() and ## and quotes and whatever =
else might be needed./FONT
BRFONT SIZE=3D2I'm trying to use IIf() in a SQL statement instead =
of the following:/FONT
/P

PFONT SIZE=3D2thedate =3D lt;cfif/FONT
BRFONT =
SIZE=3D2IsDate(form.thedate)gt;#CreateODBCDate(form.thedate)#lt;cfels=
egt;NULLlt;/cfifgt;/FONT
/P

PFONT SIZE=3D2Thanks,/FONT
BRFONT SIZE=3D2Jim/FONT
/P
BR

PFONT =
SIZE=3D2---=
---/FONT
BRFONT SIZE=3D2Archives: A =
HREF=3D"http://www.mail-archive.com/cf-talk@houseoffusion.com/" =
TARGET=3D"_blank"http://www.mail-archive.com/cf-talk@houseoffusion.com/=
/A/FONT
BRFONT SIZE=3D2To Unsubscribe visit A =
HREF=3D"http://www.houseoffusion.com/index.cfm?sidebar=3Dlistsbody=3Dli=
sts/cf_talk" =
TARGET=3D"_blank"http://www.houseoffusion.com/index.cfm?sidebar=3Dlists=
body=3Dlists/cf_talk/A or send a message to =
[EMAIL PROTECTED] with 'unsubscribe' in the =
body./FONT/P

/BODY
/HTML
--_=_NextPart_001_01BFEAAC.DB4262B0--
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To 

RE: Stored Procedure Help

[KChapman]

Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank
you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!
Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank
you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!
Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank
you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!
Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank
you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!
Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank
you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!
Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank
you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!Thank you!

I don't think I said that enough.

--K


Katrina Chapman
Consultant
Ameriquest Mortgage


   
  
[EMAIL PROTECTED] 
  
tate.ky.usTo: [EMAIL PROTECTED]
  
  cc:  
  
07/10/00 12:03Subject: RE: Stored Procedure Help   
  
PM 
  
Please respond 
  
to cf-talk 
  
   
  
   
  



Just like a cfquery, you need to reference the query:

cfoutput query="test"
!#prequal_num#! - !#borrower_lastname#! - !#highest_status#! - !
#comment_exists#!br
/cfoutput

or

cfoutput
!#test.prequal_num#! - !#test.borrower_lastname#! - !#test.highest_status#!
- !
#test.comment_exists#!br
/cfoutput


-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 10, 2000 2:07 PM
To: [EMAIL PROTECTED]
Subject: Stored Procedure Help


This is my first time working with a stored procedure and I'm not sure that
I'm doing it right.

I can get the procedure to run but I can't get the values to display.  What
am I missing

!-- cfcode --

CFSTOREDPROC PROCEDURE="p_pricing_pipeline"
DATASOURCE="#application.datasource#"

 CFPROCPARAM TYPE="IN"
VARIABLE="broker_id"
DBVARNAME="@broker_id"
VALUE="112"
CFSQLTYPE="CF_SQL_INTEGER"

 CFPROCRESULT NAME="test"

/cfstoredproc

cfoutput
!#prequal_num#! - !#borrower_lastname#! - !#highest_status#! - !
#comment_exists#!br
/cfoutput

!--Stored Procedure--

SET QUOTED_IDENTIFIER  OFFSET ANSI_NULLS  ON
GO




--
-- Given a broker, find data for its most recent 5 prequals.
--
-- DateAuthor Change
-- 07/07/00 D Noble Created.


--
create procedure dbo.p_Pricing_Pipeline (
 @broker_id int
)
as

set nocount on

create table #prequal (
 prequal_num int not null
,borrower_lastname varchar(96) null
)

insert #prequal
select top 5
 prequal_num
,borrower_lastname
from prequal
where broker_id = @broker_id
order by prequal_num desc

create table #half_results (
 prequal_num int not null
,borrower_lastname varchar(96) null
,loan_status_rank tinyint null
,number_of_comments int null
)

insert #half_results
select
 p.prequal_num
,p.borrower_lastname
,min(ls.loan_status_rank)
--,sum(isnull(c.prequal_num,0))
,sum(
 case
 when c.prequal_num is null then 0
 else 1 end
)

from
#prequal p
join scenario s on p.prequal_num = s.prequal_num
join loanstatus ls on s.loan_status_id = ls.loan_status_id
left join comment c on p.prequal_num = c.prequal_num

group by
 p.prequal_num
,p.borrower_lastname

select
 prequal_num as prequal_num
,borrower_lastname as borrower_lastname
,loan_status_rank as highest_status
,case number_of_comments
 when 0 then 0
 else 1 end as comment_exists
from #half_results

drop table #prequal
drop table #half_results

return 0


GO
SET QUOTED_IDENTIFIER  OFFSET ANSI_NULLS  ON
GO

TIA,
--K


Katrina Chapman
Consultant
Ameriquest 

Oracle CLOBs and Native Drivers

[Pete Miller]

We are having some problems with ColdFusion's native drivers for
Oracle.  Connecting to Oracle 8i (8.1.6), we receive an error whenever
attempting to read or write to a field of CLOB datatype.  I saw an
earlier reference to upgrading to ColdFusion 4.5.1.  Does this fix the
problem?  Does this same problem exist using Oracle's ODBC drivers
instead?

-- 
Pete Miller
GoTech, Inc.
http://www.gotech.net
--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: IIf() and DE confusion

[Jim McAtee]

Nope, if left blank, CF tries to evaluate CreateODBCDate() and generates
an error:

Error Diagnostic Information
Parameter 1 of function CreateODBCDate which is now "" must be a date/time
value

Jim


-Original Message-
From: Bryan Batchelder [EMAIL PROTECTED]
To: '[EMAIL PROTECTED]' [EMAIL PROTECTED]
Date: Monday, July 10, 2000 2:25 PM
Subject: RE: IIf() and DE confusion


This message is in MIME format. Since your mail reader does not
understand
this format, some or all of this message may not be legible.

--_=_NextPart_001_01BFEAAC.DB4262B0
Content-Type: text/plain;
 charset="iso-8859-1"

shouldn't this work?:

iif(IsDate(form.thedate), DE(#CreateODBCDate(form.thedate)#), DE(""))

--b

p.s.  if you ever think you have it badhere is an iif that took a few
hours of my time and about 15 minutes of a colleagues:

iif(query.red_flag[rowNbr], DE(caller.pqa  '/redflag.gif'),
iif(query.close_flag[rowNbr], ""DE(iif(query.won_flag[rowNbr],
DE(caller.pqa
 '/thumbs_up.gif'), DE(caller.pqa  '/thumbs_down.gif')))"",
""DE(caller.pqa  '/transpix.gif')""))

Laterz.


Bryan D. Batchelder   Work: 813-935-7100
Palm/Internet Developer   Home: 727-547-1322

ConnectWise, Inc. (www.ConnectWise.com)
2803 West Busch Blvd, Suite 204
Tampa, FL 33618


-Original Message-
From: Jim McAtee [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 10, 2000 4:15 PM
To: [EMAIL PROTECTED]
Subject: IIf() and DE confusion


I know this can be done, but I'll be hanged if I can figure out the right
combination of DE() and ## and quotes and whatever else might be needed.
I'm trying to use IIf() in a SQL statement instead of the following:

thedate = cfif
IsDate(form.thedate)#CreateODBCDate(form.thedate)#cfelseNULL/cfif

Thanks,
Jim

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Oracle CLOBs and Native Drivers

[Stanislav Maximov]

Pete,

what kinda error?

stas@

-Original Message-
From: Pete Miller [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 11, 2000 12:44 AM
To: [EMAIL PROTECTED]
Subject: Oracle CLOBs and Native Drivers


We are having some problems with ColdFusion's native drivers for
Oracle.  Connecting to Oracle 8i (8.1.6), we receive an error whenever
attempting to read or write to a field of CLOB datatype.  I saw an
earlier reference to upgrading to ColdFusion 4.5.1.  Does this fix the
problem?  Does this same problem exist using Oracle's ODBC drivers
instead?

--
Pete Miller
GoTech, Inc.
http://www.gotech.net

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: good simple web board been done?

[Ric Smith]

Check out coztech.com he has a cf bulletin board
like the old Matt's Scripts board.


Ric Smith



- Original Message -
From: "Jeff Fongemie" [EMAIL PROTECTED]
To: "Cf-Talk" [EMAIL PROTECTED]
Sent: Monday, July 10, 2000 3:52 PM
Subject: good simple web board been done?


 Hey everyone,

 I'm looking for a good, simple web bulletin board where users can post
 messages and replies that does not require users to create an account, and
 is not a "drill-down" type application. Client wants a greats topics and
 replies to be a great big list like the old cgi types (Mats Scripts).

 Thanks,

 Jeff


 --

 Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
 To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: Know where I can find Chr(*) definitions?

[Ric Smith]

Thanks for everyone's help, didn't know
I'd get such a response. I like playing
with ascii characters for little pointers
exclaimations and such.

Ric Smith


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: Oracle CLOBs and Native Drivers

[Jennifer]

At 01:44 PM 7/10/00 -0700, you wrote:
We are having some problems with ColdFusion's native drivers for
Oracle.  Connecting to Oracle 8i (8.1.6), we receive an error whenever
attempting to read or write to a field of CLOB datatype.  I saw an
earlier reference to upgrading to ColdFusion 4.5.1.  Does this fix the
problem?  Does this same problem exist using Oracle's ODBC drivers
instead?

What is the error message? What is the type of information going into the 
field?

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

Re: good simple web board been done?

[Sean Renet]

okay there are some fuseaction bugs that I will address later.  That's what
you get for posting a "here go look at it " app.
- Original Message -
From: "Sean Renet" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 10, 2000 1:08 PM
Subject: Re: good simple web board been done?


 I can give you code for a simple one if you want. It's written in fusebox.
 It was one of the first things I built so its not all that cool. but it
 sounds like what you are looking for.  If nothing else it will give you an
 idea where to start and it would be free.

 I think my brother put it on the site he is starting to build for fun. you
 can check it out at
 www.benet.ws

 - Original Message -
 From: "Jeff Fongemie" [EMAIL PROTECTED]
 To: "Cf-Talk" [EMAIL PROTECTED]
 Sent: Monday, July 10, 2000 12:52 PM
 Subject: good simple web board been done?


  Hey everyone,
 
  I'm looking for a good, simple web bulletin board where users can post
  messages and replies that does not require users to create an account,
and
  is not a "drill-down" type application. Client wants a greats topics and
  replies to be a great big list like the old cgi types (Mats Scripts).
 
  Thanks,
 
  Jeff
 
 

 --
 
  Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
  To Unsubscribe visit
 http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
 send a message to [EMAIL PROTECTED] with 'unsubscribe' in
 the body.
 

 --

 Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
 To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.


--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

RE: Oracle CLOBs and Native Drivers

[Dave Watts]

 We are having some problems with ColdFusion's native drivers for
 Oracle.  Connecting to Oracle 8i (8.1.6), we receive an error whenever
 attempting to read or write to a field of CLOB datatype.  I saw an
 earlier reference to upgrading to ColdFusion 4.5.1.  Does this fix the
 problem?  Does this same problem exist using Oracle's ODBC drivers
 instead?

You'll need to enable one of the "long text" options in the CF datasource
settings:

http://www.allaire.com/handlers/index.cfm?ID=16259Method=FullPageCall=/sup
port/index.cfm

Also, as a side note, I just learned that if you're using CF on Solaris with
the Oracle 8.1.6 client, you'll want to upgrade:

http://www.allaire.com/handlers/index.cfm?ID=16398Method=FullPageCall=/sup
port/index.cfm

Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
voice: (202) 797-5496
fax: (202) 797-5444

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.

CFTREE and CFGRID problems with IE

[Stephen L. McMahon]

I'm very new to this list (started today), so please forgive me if this is
an old topic:

I am building some tools for a couple of clients which look very attractive
with CFTREEs and CFGRIDs.  However, I'm finding that in Internet Explorer
(version 5 for sure...and I think version 4), the grids and trees
(especially the trees) are missing sometimes if I leave the page and come
back to it or if it goes out of focus for any reason.  No amount of
refreshing will bring them back...I generally have to kill the application
and restart it in order to get these items to display again.

Can anyone let me know what might be causing such behavior?

Thanks in advance,

Stephen L. McMahon
[EMAIL PROTECTED]

--
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
To Unsubscribe visit 
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a 
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.