RE: CVOICE 2.0 Beta passed
Cisco VoIP Fundamental book, and VoFR documentation from Cisco is very usefull. Don't forget to read IP Telephony products. regards, Ibam > > Ibam, > do you have any good resource for the CVOICE exam ? I am > looking for the > CVOICE 2.0 notes. > > > rgds > Wallace > > Ibrahim wrote: > > > Hi .. I passed it, I thought I'll get failed, because so many > questions on > > Voice over frame-relay .. > > > > Ibam > > Cvoice,Cvoice 2.0 > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > > http://www.groupstudy.com/list/Associate-Announcement.html > > _ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Job for Cisco professionals
What country/countries are you looking to work in? - Original Message - From: Naveen Sharma <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, September 10, 2001 10:29 AM Subject: Job for Cisco professionals > Dear friends, > > I am looking for job web sites for Cisco professionals, could any body point > the URL for me. > > Thanks in advance. > > Warm regards > Naveen > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Job for Cisco professionals
Dear friends, I am looking for job web sites for Cisco professionals, could any body point the URL for me. Thanks in advance. Warm regards Naveen **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Help required for CVOICE 1.0
Hi guys,, I'm going to attempt the exam of CVOICE 1.0 very soon.. if you have any dumps or notes regarding CVOICE's exam please forward to me.. King, [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
The H1-B visa program is a fraud.
Given this venue, H1-B seems on topic. Just sharing from Greenspun.com:LUSENET:{GICC) === For educational purposes only http://www.theithacajournal.com/news/stories/2904/opinion/27812.html Monday, September 4, 2000 Why Clinton should veto 'H1-B' By Vernon M. Briggs Jr./Guest Columnist The sad but informative letter of the Jesse Fern (Aug. 26 "Software labor shortage") is right on target. The H1-B visa program is a fraud. It is not intended to fill a shortage of computer programmers. Its purpose is to supply a greedy industry with cheap workers who cannot be bid away in what is supposed to be a competitive labor market. As Fern's letter indicates, as long as this phony program is allowed to exist, very few U.S. citizens will ever be hired. The computer industry, in all of its myriad of forms, has found a way to legally discriminate against the employment of U.S. citizens in their own country. The H1-B program allows U.S. firms to hire foreign nationals on temporary visas for up to six-year periods of time. During this time, the foreign workers are under contract to the U.S. employer and may not quit in response to any offer from a competitor. They are essentially indentured servants. Their only option, if dissatisfied with their employer or life in America, is to return to their homeland. In its present manifestation, the H1-B visa was created by the Immigration Act of 1990. It is supposed to be a way to admit workers for employment in "specialty organizations" where there are "temporary shortages" of U.S. workers until the nation's education and training system can respond by providing sufficient job applicants. The numbers of visas was originally capped at 65,000 a year. In 1998, at the insistence of the computer industry, the cap was almost doubled to 115,000 a year. Pending in Congress at this very moment is a proposal to almost double the number again to 200,000 visas a year. As it has evolved over the past 10 years, the H1-B program has been converted from being a worker recruitment program of last resort to one of first preference and almost exclusive use. There is no effective check made by the under-staffed and under-funded Department of Labor that is responsible for verifying the assertion of the industry that they cannot find "qualified" applicants. The industry needs only "attest" to the fact that a shortage exists in order to have visas issued to people from various less economically developed countries (e.g., India, Pakistan, Taiwan, Eastern Europe, Russia) to fill in the openings. As a consequence, the computer industry has been able to recruit programmers to work at wage levels considerably below what comparably trained workers in the U.S. feel are justified for investing in such a career. Moreover, as Mr. Fern's letter testified, the employers are now requiring several years of prior experience work to be hired. Workers in Third World nations are willing to work for these low wages (which are higher than they receive in their homelands) and they already have the requisite years of work experience. As a consequence, few young Americans are even considered should they apply for any of the jobs that the industry is required by law to advertise. Moreover, as the industry is able to keep H1-B workers for up to six years, there is no fear that the supposedly free market will cause wages to rise in response to competition as the industry expands. Likewise, as more and more Americans like Mr. Fern realize that they are not wanted despite all the hype about the need for more programmers, there will be more claims by the industry that American workers are unavailable to meet their demand. But such a consequence is entirely a self-fulfilling prophecy. One hopes that President Clinton will veto the pending meritless proposal to increase the H1-B cap when it reaches his desk. But given the fact that both parties are so beholden to the computer industry for financial support, I am not optimistic. The national interest would be best served, as Mr. Fern suggests, if this corporate labor subsidy were terminated. But it will take an act of leadership to do it. --- Briggs is a professor in Cornell's School of Industrial and Labor Relations. His book, "Immigration and American Unionism," is scheduled to be published in the spring by Cornell University Press. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and No
Re: Access list
The McGraw-Hill book Bob T mentioned, I have read it and like it a lot. It covers a lot of ground -- access lists and related stuff, and it is concise and readable and has lots of examples in it. Highly recommended. About $29US. Bob W. Recent CCNA/CCDA - Original Message - From: Bob & Karen Timmons <[EMAIL PROTECTED]> To: David Jackson <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Sunday, September 10, 2000 9:48 PM Subject: Re: Access list > That's a pretty open-ended question. I don't think one could answer this > in an email. Your best bet is to go to Cisco.com and/or buy some books. > A few suggestions would be: > > Cisco IOS Network Security - Cisco Press > CCNA/ACRC Study Guide(s) - Sybex > > There's also a book by McGraw Hill that's specifically Cisco access-lists, > though I haven't read it. > > Here's some links to get you started: > > http://www.cisco.com/univercd/cc/td/doc/product/software/ssr83/rpc_r/48383.h > tm > > http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/112cg_cr/5rb > ook/5rip.htm > > http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113ed_cr/s > ecur_c/scprt3/scacls.htm > > Bob > - Original Message - > From: David Jackson <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Sunday, September 10, 2000 9:06 PM > Subject: Access list > > > > hello, > > > > can some one explain the appropriate procedure of both writing an extended > > and standard access-list > > eventually, i will be responsible for applying acl's on ourproduction > > (cisco) routers. > > > > here's what i do know standard acl's reference source addresses and > > extended acl's refence source and destination > > transport protocols and application protocols are used. Now im ready for > an > > educational journey into acl's. > > > > thanks > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > > http://www.groupstudy.com/list/Associates.html > > _ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CVOICE 2.0 Beta passed
Ibam, do you have any good resource for the CVOICE exam ? I am looking for the CVOICE 2.0 notes. rgds Wallace Ibrahim wrote: > Hi .. I passed it, I thought I'll get failed, because so many questions on > Voice over frame-relay .. > > Ibam > Cvoice,Cvoice 2.0 > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associate-Announcement.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] begin:vcard n:Lee;Wallace tel;fax:25906443 tel;work:28622682 x-mozilla-html:FALSE org:Netstar (Hong Kong) Limited adr:;; version:2.1 email;internet:[EMAIL PROTECTED] title:Network Consultant, CCDA, CCNA fn:Wallace Lee end:vcard
Thank you
I would like to express my appreciation to Chuck & Brian for your help. Thank you, so kindly. Adele **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Subcribe me
Dear Sir Pls subcribe me into The Groupstudy Thank you very much Nam
Re: what is wire-speed?
64 byte packets and at the max rated pps per port - 14,000 pps something for 10 Mbps Ethernet. However, vendors get cute with the calculation - for example, some, use ingress only while others use ingress and egress - effectively double counting. Others use cumulative ports with oversubscription, which would exceed the backplane and be unreachable. Short answer - don't use pps to buy a switch and ask the vendors 'how' they calculate. --- Kent <[EMAIL PROTECTED]> wrote: > Hi all, > > Any body knows what they mean by saying "wire-speed" > forwarding about a switch? > Also, when Cisco says a switch can forward at 100 > million pps or something like this, what the size of > the packets they usually refer to of the PPS(packet > per second)? 64byte? > > Thanks > > Kent > > > > > __ > Do You Yahoo!? > Yahoo! Mail - Free email you can access from > anywhere! > http://mail.yahoo.com/ > > **NOTE: New CCNA/CCDA List has been formed. For more > information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: > http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: > http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] = Robert Padjen __ Do You Yahoo!? Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Access list
That's a pretty open-ended question. I don't think one could answer this in an email. Your best bet is to go to Cisco.com and/or buy some books. A few suggestions would be: Cisco IOS Network Security - Cisco Press CCNA/ACRC Study Guide(s) - Sybex There's also a book by McGraw Hill that's specifically Cisco access-lists, though I haven't read it. Here's some links to get you started: http://www.cisco.com/univercd/cc/td/doc/product/software/ssr83/rpc_r/48383.h tm http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/112cg_cr/5rb ook/5rip.htm http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113ed_cr/s ecur_c/scprt3/scacls.htm Bob - Original Message - From: David Jackson <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, September 10, 2000 9:06 PM Subject: Access list > hello, > > can some one explain the appropriate procedure of both writing an extended > and standard access-list > eventually, i will be responsible for applying acl's on ourproduction > (cisco) routers. > > here's what i do know standard acl's reference source addresses and > extended acl's refence source and destination > transport protocols and application protocols are used. Now im ready for an > educational journey into acl's. > > thanks > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PAP, CHAP under windows98
One small comment. Windows doesn't do CHAP, but rather MS-CHAP. They like to prepend the domain name and a "\" in front of the user id. So it's not compatible with plain old CHAP. In IOS versions prior to 12.0.1 MS-CHAP is broken. And supposedly fixed since 12.0.1. Rodgers Moore ""Erick B."" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Under the dial up networking profile, if you have > require encrypted password checked, thats CHAP. > Otherwise it's PAP. > > --- Jim Bond <[EMAIL PROTECTED]> wrote: > > Hello, > > > > Is there anyway to select PAP or CHAP in windows > > 98/95? > > > > Thanks in advance. > > > > Jim > > > = > -/--- > Erick B. / http://berk.dhs.org > [EMAIL PROTECTED] / CCNP+Security+NetRanger > /NNCSE, CCIE Written > -/--- > > __ > Do You Yahoo!? > Yahoo! Mail - Free email you can access from anywhere! > http://mail.yahoo.com/ > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: what is wire-speed?
Wire speed means the switch can pump out packets as fast as the medium can handle. For example, the maximum packets-per-second rate on 10-Mbps Ethernet with 64-byte packets is 14,880 packets per second. This comes from Preamble = 64 bits 64 Byte frame = 512 bits Interframe gap = 96 bits Total = 672 bits Max packets per second on 10 Mbps Ethernet = 10,000,000 / 672 = 14,880 packets per second. A wire-speed switch, which most are, would have no problem outputting that number of packets per second. If you were to use 1024 byte packets, the number is 1197 packets per second on 10Mbps Ethernet. So, yes, vendors do tend to use 64-byte packets when quoting their results, because it gives them better numbers. The other thing vendors do is quote the results when using Gigabit Ethernet. That's where numbers like millions of packets per second come from. In addition, if the vendor's numbers are based on tests that output to multiple ports, then you can get astronomical numbers, for example, 1.48 million packets per second multiplied by 100 ports. As you can probably guess, this is a rudimentary way of specifying the performance of a switch that is fraught with the over-zealousness of marketing drones. &;-) Priscilla At 02:12 PM 9/10/00, Kent wrote: >Hi all, > >Any body knows what they mean by saying "wire-speed" >forwarding about a switch? >Also, when Cisco says a switch can forward at 100 >million pps or something like this, what the size of >the packets they usually refer to of the PPS(packet >per second)? 64byte? > >Thanks > >Kent > > > > >__ >Do You Yahoo!? >Yahoo! Mail - Free email you can access from anywhere! >http://mail.yahoo.com/ > >**NOTE: New CCNA/CCDA List has been formed. For more information go to >http://www.groupstudy.com/list/Associates.html >_ >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html >FAQ, list archives, and subscription info: http://www.groupstudy.com >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Priscilla Oppenheimer http://www.priscilla.com **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: How to connect two CSU/DSU back to back?
Using cross cable. Pin 1 -- 4 2 -- 5 4 -- 1 5 -- 2 Regards. - Original Message - From: Ehab Mohamad Abdullah <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, September 10, 2000 12:55 PM Subject: How to connect two CSU/DSU back to back? > Hi, > Any body can tell me how to connect two CSU/DSU back to back, they > have external power supply. > Thanks in advance > Ehab > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: what is wire-speed?
Yes the numbers are based upon 64 byte packets. All vendors do this for the numbers game. You gotta love marketing. "Kenneth Lorenzo" <[EMAIL PROTECTED]> wrote in message 8ph51t$413$[EMAIL PROTECTED]">news:8ph51t$413$[EMAIL PROTECTED]... > wire-speed meaning it's processed almost as fast as it comes through the > wire unlike when bridging is done via software. > > "Kent" <[EMAIL PROTECTED]> wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi all, > > > > Any body knows what they mean by saying "wire-speed" > > forwarding about a switch? > > Also, when Cisco says a switch can forward at 100 > > million pps or something like this, what the size of > > the packets they usually refer to of the PPS(packet > > per second)? 64byte? > > > > Thanks > > > > Kent > > > > > > > > > > __ > > Do You Yahoo!? > > Yahoo! Mail - Free email you can access from anywhere! > > http://mail.yahoo.com/ > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > > http://www.groupstudy.com/list/Associates.html > > _ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Anyone who want study for CCIE Design?
Hi all I am people who is interest in CCIE Design and want discuss with people. Is there sb who has the same interesting with me ? Especially in China. xhwang __ === ÐÂÀËÃâ·Ñµç×ÓÓÊÏä http://mail.sina.com.cn ÐÂÀËÍƳö°ÂÔ˶ÌÐÅÏ¢ÊÖ»úµã²¥·þÎñ http://sms.sina.com.cn/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: could this be a routing problem
Check the default gateway on the server and routing table on the server (route print in windows). Try a extended ping on the remote router from a interface the servers not attached to. If it doesn't respond back to the extended ping from a different network # the server doesn't have a proper route for that network, so it don't know where to send reply or is sending it elsewhere if the default gateway is invalid. Also, from the server traceroute (tracert in windows) back to your central site if a ping fails and see which way it's going. --- [EMAIL PROTECTED] wrote: > Hi all, i have a problem connecting to a server in > one of our sites, i can > ping the router on the remote site, but cannot ping > the server, when i > telnet unto the remote router i am able to ping the > server, any ideas > please > > > ___ > UPDATED Posting Guidelines: > http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: > http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: EIGRP metric
The bandwidth and delay values could be different on each end of a circuit. For example, in frame relay each PVC has it's own CIR/etc so you would want the values to reflect that of the PVC. It's not needed if theres only one route between the 2 routers, but was pointing out in frame relay, etc it could be different. Also, some network management/reporting functions/apps use the bandwidth value to report line usage so having it set correctly will produce better #s. --- "Stull, Cory" <[EMAIL PROTECTED]> wrote: > Thats a loaded question... The clock rate will not > affect the routing > decisions made by EIGRP.. That is what the > bandwidth setting is for. It > should be the same on both ends. However if you > only have 2 routers > connected via a crossover cable you don't need to > worry about which route it > takes or load balancing.Cause theres only one > route. Just kidding. __ Do You Yahoo!? Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Access list
hello, can some one explain the appropriate procedure of both writing an extended and standard access-list eventually, i will be responsible for applying acl's on ourproduction (cisco) routers. here's what i do know standard acl's reference source addresses and extended acl's refence source and destination transport protocols and application protocols are used. Now im ready for an educational journey into acl's. thanks **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE Study group in Tokyo?
Hi, Do you know whether there is a CCIE study group in Tokyo? Thankx, cvp. ccnp/ccda/ccie written (for the moment :) __ Do You Yahoo!? Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PAP, CHAP under windows98
Under the dial up networking profile, if you have require encrypted password checked, thats CHAP. Otherwise it's PAP. --- Jim Bond <[EMAIL PROTECTED]> wrote: > Hello, > > Is there anyway to select PAP or CHAP in windows > 98/95? > > Thanks in advance. > > Jim = -/--- Erick B. / http://berk.dhs.org [EMAIL PROTECTED] / CCNP+Security+NetRanger /NNCSE, CCIE Written -/--- __ Do You Yahoo!? Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: bcsn
I am getting ready to take this test also.ACRC does not provide enough info on BGP.Go to cisco's site and serach on bgp.I found A 5 section case study that I think is real good. Good luck Tim >From: Laszlo Kovacs <[EMAIL PROTECTED]> >Reply-To: Laszlo Kovacs <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] >Subject: bcsn >Date: Sun, 10 Sep 2000 14:13:15 -0700 > >Hi, I passed BCRAN yesteday with 864. I have the old ACRC book. Can I >use that for the BCSN exam? Thanks > >**NOTE: New CCNA/CCDA List has been formed. For more information go to >http://www.groupstudy.com/list/Associates.html >_ >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html >FAQ, list archives, and subscription info: http://www.groupstudy.com >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Help for BCRAN books and amterial related
Title: RE: Help for BCRAN books and amterial related The official Cisco book (Building Cisco Remote Access Networks, ISBN: 1578700914) was the only one I used to pass the 640-505. You can take the BCRAN without going through BSCN, as they cover different subjects. BSCN is very routing-oriented, while BCRAN covers alot more on ISDN, different access router models, and WAN technologies like X.25 & frame-relay. Cheers & good luck! Jeff -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Swapnil M Shah Sent: Saturday, September 09, 2000 2:31 PM To: [EMAIL PROTECTED] Subject: Help for BCRAN books and amterial related Dear All Can anyone suggest any good book or any other material on BCRAN exam. I am planning to bye CBT's are they sufficient ?? I have not given BSCN exam.Can I give BCRAN without giving BSCN. Pls kindly reply to the query whoever can help; Thanks Group --- With Best Regards Swapnil Shah Get your FREE Email and Voicemail at Lycos Communications at http://comm.lycos.com **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Command Question
If I set a clock rate of 56000 does that mean that I can not run the interface at say t1 bandwidth? - Original Message - From: Yee, Jason To: 'Adam Hickey' ; '[EMAIL PROTECTED]' Sent: Sunday, September 03, 2000 9:08 PM Subject: RE: Command Question clock rate is normally omitted if your router's DTE interface is connected to a CSU/DSU since the modem will provide the clock rate information. However if you are in a lab scenario whereby you are simulating a Wan by connecting your DTE to your DCE using two Cisco cables then at the DCE end you have to provide the clock rate in order that your serial interface can be up and running. However , bandwidth needs to be supplied no matter you are in lab or practical environments because things like reliability , load etc depends on it to work. Hope that helps Jason -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Adam HickeySent: Saturday, September 02, 2000 6:56 AMTo: [EMAIL PROTECTED]Subject: Command Question What is the diference between the "clock rate" command and the "bandwidth" command? Thanks Adam Hickey [EMAIL PROTECTED]
Re: what is wire-speed?
wire-speed meaning it's processed almost as fast as it comes through the wire unlike when bridging is done via software. "Kent" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi all, > > Any body knows what they mean by saying "wire-speed" > forwarding about a switch? > Also, when Cisco says a switch can forward at 100 > million pps or something like this, what the size of > the packets they usually refer to of the PPS(packet > per second)? 64byte? > > Thanks > > Kent > > > > > __ > Do You Yahoo!? > Yahoo! Mail - Free email you can access from anywhere! > http://mail.yahoo.com/ > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BGP on 2600?
Title: RE: BGP on 2600? Hi all, 2600 series with 64MB will "just" fit the full BGP routes. I watched our 2620 with 64MB's free memory drop from 40MB to 3.3MB when the upstream provider starting injecting the full routes. The thing that bothered me was that as time went on, the free memory started shrinking. When it struck 1MB after about 2 weeks, I decided to cull some BGP routes, so I don't have to experience "unscheduled" router crash when the 2620 runs out of memory. We've since upgraded to 7206 with 128MB, and I no longer need to watch the free RAM counter nervously everyday! Jeff -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of John Kaberna Sent: Sunday, September 10, 2000 6:30 PM To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: BGP on 2600? You can run BGP on a 2600 with 64MB of RAM with full BGP routes, but I wouldn't suggest it. I've actually done it before If you have a very stable link it is possible. But, even with 128mb of memory the processor is not very fast to handle frequent route flaps. John - Original Message - From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Sunday, September 10, 2000 2:00 AM Subject: RE: BGP on 2600? > Hi, > > It is true that untill now you couldn't install 128MB of DRAM on a 2600 > router, but a few weeks ago Cisco lonch another two 2600 router types the > 2650 and the 2651 both more powreful routers with more DRAM capacity until > 128MB of DRAM a thing you could have done until now only from the 3640 > router. BUT NO MORE. > > GIL > CCNA/CCDA > > -Original Message- > From: Aaron Moreau-Cook [mailto:[EMAIL PROTECTED]] > Sent: ??? 09 ?? 2000 13:23 > To: [EMAIL PROTECTED] > Subject: BGP on 2600? > > > I read a few weeks back that someone has a 2600 series router with 128mb RAM > in in. > > Can someone confirm, or deny that you can put 128mb RAM in a 2600? > > Thanks > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > This email was scanned using ESPG @ PubliCom Haifa. > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Why do Labs use Serial vice Ethernet Connections
I've personally had very good luck with routers that I purchased from www.grandstore.com. I purchased switches from www.techstore.com (with a sale code that saved about $50-100 additional), they were no more expensive new than what they were selling for on eBay used. Grandstore also caries new switches very affordably as well. As far as labs the ones from www.mentortech.com (vlabs)are very reasonable. Call up grandstore.com and ask them to work with you if you're buying a couple of routers or switches. Their number is on their website. They normally will give you some of a break vs. what is on their site. ed _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: cidr,route summarization
VLSM - Variable-length subnet mask. The ability to specify a different subnet mask for the same network number on different subnets. VLSM can help optimize available address space. Route Summarization - The consolidation of advertised addresses in OSPF and IS-IS. In OSPF, this causes a single summary route to be advertised to other areas by an ABR (Area Border Router). CIDR - Classless Interdomain Routing. A technique supported by BGP4 and based on Route Agrregation. CIDR allows routers to group routes together in order to cut down on the quantity of routing information carried by core routers. With CIDR, several IP networks appear to networks outside the group as a single, larger entity. These are all have to deal with scalability, addressing the various networks. Jeffry Jacob wrote: > hi > could someone tell me what is vlsm , route summarization and cidr > maybe its the lack of grey matter in my head but cant seem to make out the > diff btwn cidr and summarization > > thanx in advace.. > > jeff > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: what is wire-speed?
Hi all, Any body knows what they mean by saying "wire-speed" forwarding about a switch? Also, when Cisco says a switch can forward at 100 million pps or something like this, what the size of the packets they usually refer to of the PPS(packet per second)? 64byte? Thanks Kent __ Do You Yahoo!? Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Foundation 2.0 (640-509)
Cisco Foundation 2.0 (640-509) beta test result is out and the test is available now. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Protocol Analyzer and Sniffers
Did you check WG? www.wwgsolutions.com. Good Luck "Fred Thomas" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello group, does anyone know of any Analyzers, probes or sniffers that > that would support (DWDM) Division Wave Division Multiplexing, ATM, > Sonnet, Gigabit and Fasteternet. > > Thanks > Fred Thomas > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associate-Announcement.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ATM Virtual Lab Time
www.ccbootcamp.com ""Bruce"" <[EMAIL PROTECTED]> wrote in message 8peea1$rb5$[EMAIL PROTECTED]">news:8peea1$rb5$[EMAIL PROTECTED]... > Does anyone know where I can do virtual labs with ATM scenarios. I did not > see any on Mentorlabs or some of the others. I would appreciate any advice. > I have access to a 7206 with coaxial DS3 modules and a couple of 3620's and > 2500's with serial interfaces and a Catalyst 5000. Is there any way to set > up ATM with that equipment? I am trying to learn ATM but I am having trouble > getting hands on. If you have Any advice at all, please let me know. > > Bruce > [EMAIL PROTECTED] > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Why do Labs use Serial vice Ethernet Connections
My company has home labs for sale: www.optsys.net. Let me know what you are looking for. -Brad ""rtc9"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > In the HUTNIK and SATERLEE CCIE LAB BOOK, why do they always use > SERIAL (HSSI to HSSI)to SERIAL Connections, DCE clockrate =50. WHY CANT > the connections be made in Ethernet or Fast Ethernet with Crossover UTP > Cables? REASON!! I have only 2600's and 2500's--limited number of ETHERNET > PORTS avaialble, also crossover cable expensive!! > PS WHERE CAN I BUY CISCO ROUTERS USED FOR HOME CCIE LAB? I am tired of going > to lab site 50 miles away at 5 AM Sunday iits lonely. > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco Secure VPN BETA exam
I took this exam on the 1st, Sept and all I've got to say is know "Security" The test covered everything from PIX, Cisco Secure, IOS Firewall Feature Set, IPSEC, IKE, CA, VPN client, and cisco tools for implementation. The test was the normal 3 hours and loaded with 243 questions, I must admit at one time I felt like simply walking out on the test. The same questions was asked over and over with slightly different twist. Overall, the test wasn't bad... just a lot of questions. Some were type in the command but not much. Good luck on this exam. I'll just say this test was designed for the folks that work on the *equipment* all the time. HTH Nigel. - Original Message - From: chung <[EMAIL PROTECTED]> Newsgroups: groupstudy.cisco To: <[EMAIL PROTECTED]> Sent: Sunday, September 10, 2000 2:33 PM Subject: Cisco Secure VPN BETA exam > Hello!! > > I will take the Cisco Secure VPN BETA exam tomorrow!! Could anyone give > me some advice? Which topic should I focus? > > Thanks a lot!! > > Regards, > Tony > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: How does cisco router load-balancing?
Interesting question! Let's go through how it works and see "In Theory" what we might expect to happen. The first packet to a destination is always process switched, so first packets should be evenly distributed between the interfaces. But the E1 has fast caching so all subsequent packets will traverse E1. What I suspect is that the second packet of a stream, which took E0 for the first packet, will traverse E1 which will cache the destination and all subsequent packets will traverse E1. So even though E0 is used for first packets to a destination, E1 will get the second packet and will add it to the cache and ALL streams will end up using E1 effectively stealing everything from E0. The second packet on would traverse E1. E0 will barely be used. No, that's not 100 % correct. The process engine doesn't care about destination, it switches the queue. A stream (let's call it Bob) could stay on E0, but as the packets are dequeued every packet prior to a Bob packet would have to be sent to E1. You've got a 50/50 chance of that happening. So this becomes a straight forward Prob & Stat exercise: flipping a coin. While the odds are 50/50 to the individual packet, the stream has a probability of the aggregation of all preceding packets. Can you flip a coin and come up heads 100 times in a row? Yes, but is unlikely. The more streams, the more coins that are flipped, and the more likely _a_ stream will be sent to E1. I think what we would see if there were 256 streams something similar to: 1st packet: 128 go to E0, 128 go to E1 2nd packet: 64 go to E0, 192 to E1 (128 1st + 64 2nd) 3rd packet: 32 go to E0, 224 to E1 (128 1st + 64 2nd + 32 3rd) 4th packet: 16 go to E0, 240 to E1 (128 1st + 64 2nd + 32 3rd + 16 4th) So the probability a stream would traverse and stay on E0 to it's completion would be computed as: p = 100/(2^n) where "p" is the percentage probability (how many out of 100), "n" is the number of packets in the stream (ie, the length). This doesn't take into account when the stream count is 0. Of course that's my theory. Anyone have time to bench and test it? Rodgers Moore, CCDP, CCNP-Security Design and Security Consultant Data Processing Sciences, Corp. "luobin Yang" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, group, > > I have question quite confused about. I learnt that per-packet > load-balancing is used when process-switching is enabled and > per-destination load-balancing is used when fast-switching is enabled. > > My question is, If there are two equal-cost routes between RouterA and > RouterB, let's say the interfaces are E0 and E1. If I enable > process-switching on E0 and fast-switching on E1, which load-balancing > is used in this situation? > > Hope can get some answer. > Luobin > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Decreasing # of CCIE's Worlwide
- Original Message - From: Ejay Hire Here's todays statistic. > 0.08% of people on earth are CCIE's ...Why am I thinking of a line from Revenge of the Nerds right now? "There are 7,327 students at Adams, 52% of which are women..." ;-) **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
bcsn
Hi, I passed BCRAN yesteday with 864. I have the old ACRC book. Can I use that for the BCSN exam? Thanks **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IOS Commands for ISDN and Async Call in AS5800
Hi,.. I need the IOS Commands for information statics for ISDN and Async Call. I have E1 Trunk. Thank. _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BCMSN: STP topology changes
Ole- When the root switch sends out the topology change BPDU, it does not specify that Switch E is no longer available. It simply flips the Topology Change bit in every Configuration BPDU saying that there has been a topology change SOMEWHERE. This lets the switches age out entries in Forward Delay seconds, 15 by default, much faster than the default 300 seconds. It sends these TC BPDUs out for Forward Delay + Max Age seconds (a default of 35 seconds). Once this time is up, it stops flipping the TC bit in the configuration BPDUs. The Cisco Press book by Clark/Hamilton, Cisco LAN Switching has two chapters on STP that are undeniably the best around. Its worth reading if you're taking BCMSN. /Jared -Original Message- From: Ole Drews Jensen [mailto:[EMAIL PROTECTED]] Sent: Sunday, September 10, 2000 10:35 AM To: '[EMAIL PROTECTED]' Subject: BCMSN: STP topology changes I am not sure if it's me running on 50% power this Sunday morning (most likely), if it's the book that is written like a white house speech, or if it's both. Anyway, the reason for this e-mail is that I am reading something that to me doesn't make sense. For those of you who would like to comment on this, if you have Cisco Press' BCMSN book, I am refereing to "Handling Topology Changes in Spanning Tree" on pages 142 and 143. If you do not have that book, here's a quick description: Switch A is the ROOT bridge. Switch B and C are both connected to Switch A. Switch D is connected to both Switch B and C. Switch E is connected to Switch D. Since A and D can see each other through both Switch B and C, the connection between D and C is blocked. The situation is that Switch D's link to E fails, and Switch D sends a notice to Switch A (the root bridge) via Switch B. The root bridge (Switch A) now sets the topology change in its configuration for a period of time equal to the sum of the fwd delay and max age parameters. According to step 5 (in the book): "A bridge receiving the topology change configuration message from the root bridge uses the fwd delay timer to age out entries in its address table. This allows it to age out entries faster than the normal five-minute default so that stations that are no longer available due to the topology change will be aged out faster. It does this until it no longer receives topology change configuration messages from the root bridge." The last line in that quote makes it sound like it keeps receiving messages about the link E being down until it's up again - but what if the Switch E never comes up again because it was sold to someone else - will the root bridge keep sending messages about it forever??? - I don't think so, but that is how I read it. Can someone please clarify this for me? Thanks in advance, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.insync.net/~drews/ccnp **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BCMSN: STP topology changes
Thanks Jared, that was a good explanation. I have yet a little more that 50% of the book left to read, but if I do not feel secure about STP (and other BCMSN related stuff) when I'm done, I will surely consider buying the Cisco LAN Switching book. Take care, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.insync.net/~drews/ccnp -Original Message- From: Jared Carter [mailto:[EMAIL PROTECTED]] Sent: Sunday, September 10, 2000 12:45 PM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: BCMSN: STP topology changes Ole- When the root switch sends out the topology change BPDU, it does not specify that Switch E is no longer available. It simply flips the Topology Change bit in every Configuration BPDU saying that there has been a topology change SOMEWHERE. This lets the switches age out entries in Forward Delay seconds, 15 by default, much faster than the default 300 seconds. It sends these TC BPDUs out for Forward Delay + Max Age seconds (a default of 35 seconds). Once this time is up, it stops flipping the TC bit in the configuration BPDUs. The Cisco Press book by Clark/Hamilton, Cisco LAN Switching has two chapters on STP that are undeniably the best around. Its worth reading if you're taking BCMSN. /Jared -Original Message- From: Ole Drews Jensen [mailto:[EMAIL PROTECTED]] Sent: Sunday, September 10, 2000 10:35 AM To: '[EMAIL PROTECTED]' Subject: BCMSN: STP topology changes I am not sure if it's me running on 50% power this Sunday morning (most likely), if it's the book that is written like a white house speech, or if it's both. Anyway, the reason for this e-mail is that I am reading something that to me doesn't make sense. For those of you who would like to comment on this, if you have Cisco Press' BCMSN book, I am refereing to "Handling Topology Changes in Spanning Tree" on pages 142 and 143. If you do not have that book, here's a quick description: Switch A is the ROOT bridge. Switch B and C are both connected to Switch A. Switch D is connected to both Switch B and C. Switch E is connected to Switch D. Since A and D can see each other through both Switch B and C, the connection between D and C is blocked. The situation is that Switch D's link to E fails, and Switch D sends a notice to Switch A (the root bridge) via Switch B. The root bridge (Switch A) now sets the topology change in its configuration for a period of time equal to the sum of the fwd delay and max age parameters. According to step 5 (in the book): "A bridge receiving the topology change configuration message from the root bridge uses the fwd delay timer to age out entries in its address table. This allows it to age out entries faster than the normal five-minute default so that stations that are no longer available due to the topology change will be aged out faster. It does this until it no longer receives topology change configuration messages from the root bridge." The last line in that quote makes it sound like it keeps receiving messages about the link E being down until it's up again - but what if the Switch E never comes up again because it was sold to someone else - will the root bridge keep sending messages about it forever??? - I don't think so, but that is how I read it. Can someone please clarify this for me? Thanks in advance, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.insync.net/~drews/ccnp **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BCMSN: STP topology changes
Thanks Daniel, That's what I had thought and hoped for - I just felt that the way it was written made it sound like it just kept on notifying other switches. I am currently creating a "good-old-dos" application in Turbo Pascal 5.5 that will simulate a set-command based switch. It is not a true simulator (yet) since it will only tell you if your command was good or not, and what the result of the command would be. Anyway, I am putting in the commands as I read them in the book - that way I can practise them on the way. When I'm done with it, and if it turns out to be any good - I will make it available for free at my website. May the rest of your weekend be great, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.insync.net/~drews/ccnp -Original Message- From: Daniel Boutet [mailto:[EMAIL PROTECTED]] Sent: Sunday, September 10, 2000 11:14 AM To: [EMAIL PROTECTED] Subject: Re: BCMSN: STP topology changes Ole I am not 100% sure but I think that you forgot that it is only meant to age out the entry faster that the default value of 300 sec or 5 minutes. There are also the Hello msg that tells a switch which port is actually "live". If you read a little further on page 159 there is mention of timers for bpdu lifetime. Hope this helps to clarify. "Ole Drews Jensen" <[EMAIL PROTECTED]> wrote in message 2019FB428FD3D311893700508B71EBFB2C5B6E@RWR_MAIL_SVR">news:2019FB428FD3D311893700508B71EBFB2C5B6E@RWR_MAIL_SVR... > I am not sure if it's me running on 50% power this Sunday morning (most > likely), if it's the book that is written like a white house speech, or if > it's both. Anyway, the reason for this e-mail is that I am reading something > that to me doesn't make sense. > > For those of you who would like to comment on this, if you have Cisco Press' > BCMSN book, I am refereing to "Handling Topology Changes in Spanning Tree" > on pages 142 and 143. > > If you do not have that book, here's a quick description: > > Switch A is the ROOT bridge. > > Switch B and C are both connected to Switch A. > > Switch D is connected to both Switch B and C. > > Switch E is connected to Switch D. > > Since A and D can see each other through both Switch B and C, the connection > between D and C is blocked. > > The situation is that Switch D's link to E fails, and Switch D sends a > notice to Switch A (the root bridge) via Switch B. > > The root bridge (Switch A) now sets the topology change in its configuration > for a period of time equal to the sum of the fwd delay and max age > parameters. > > According to step 5 (in the book): "A bridge receiving the topology change > configuration message from the root bridge uses the fwd delay timer to age > out entries in its address table. This allows it to age out entries faster > than the normal five-minute default so that stations that are no longer > available due to the topology change will be aged out faster. It does this > until it no longer receives topology change configuration messages from the > root bridge." > > The last line in that quote makes it sound like it keeps receiving messages > about the link E being down until it's up again - but what if the Switch E > never comes up again because it was sold to someone else - will the root > bridge keep sending messages about it forever??? - I don't think so, but > that is how I read it. > > Can someone please clarify this for me? > > Thanks in advance, > > Ole > > > Ole Drews Jensen > Systems Network Manager > CCNA, MCSE, MCP+I > RWR Enterprises, Inc. > [EMAIL PROTECTED] > http://www.insync.net/~drews/ccnp > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Catching up on CVOICE 2.0
I've been off the list for a few days while I changed e-mail addresses. Has anybody learned anything new about the CVOICE 2.0 test, i.e. is it being offered, what does it cover, etc. Thanks, just hoping for a recap. By the way, I'm heading to St. Louis to take the CIPT (VoIP) class for the next five days. If anybody is interested in the subject and wants to converse off-line, contact me though this e-mail address... Thanks all... - Dennis **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BCMSN: STP topology changes
Ole I am not 100% sure but I think that you forgot that it is only meant to age out the entry faster that the default value of 300 sec or 5 minutes. There are also the Hello msg that tells a switch which port is actually "live". If you read a little further on page 159 there is mention of timers for bpdu lifetime. Hope this helps to clarify. "Ole Drews Jensen" <[EMAIL PROTECTED]> wrote in message 2019FB428FD3D311893700508B71EBFB2C5B6E@RWR_MAIL_SVR">news:2019FB428FD3D311893700508B71EBFB2C5B6E@RWR_MAIL_SVR... > I am not sure if it's me running on 50% power this Sunday morning (most > likely), if it's the book that is written like a white house speech, or if > it's both. Anyway, the reason for this e-mail is that I am reading something > that to me doesn't make sense. > > For those of you who would like to comment on this, if you have Cisco Press' > BCMSN book, I am refereing to "Handling Topology Changes in Spanning Tree" > on pages 142 and 143. > > If you do not have that book, here's a quick description: > > Switch A is the ROOT bridge. > > Switch B and C are both connected to Switch A. > > Switch D is connected to both Switch B and C. > > Switch E is connected to Switch D. > > Since A and D can see each other through both Switch B and C, the connection > between D and C is blocked. > > The situation is that Switch D's link to E fails, and Switch D sends a > notice to Switch A (the root bridge) via Switch B. > > The root bridge (Switch A) now sets the topology change in its configuration > for a period of time equal to the sum of the fwd delay and max age > parameters. > > According to step 5 (in the book): "A bridge receiving the topology change > configuration message from the root bridge uses the fwd delay timer to age > out entries in its address table. This allows it to age out entries faster > than the normal five-minute default so that stations that are no longer > available due to the topology change will be aged out faster. It does this > until it no longer receives topology change configuration messages from the > root bridge." > > The last line in that quote makes it sound like it keeps receiving messages > about the link E being down until it's up again - but what if the Switch E > never comes up again because it was sold to someone else - will the root > bridge keep sending messages about it forever??? - I don't think so, but > that is how I read it. > > Can someone please clarify this for me? > > Thanks in advance, > > Ole > > > Ole Drews Jensen > Systems Network Manager > CCNA, MCSE, MCP+I > RWR Enterprises, Inc. > [EMAIL PROTECTED] > http://www.insync.net/~drews/ccnp > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Ph D
Folks: This post may be somewhat off target, but I would appreciate some advice. I want to combine my certs (CCNA, MCSE, now doing CCNP) with a traditional University degree. I am looking for a site that would allow me to make one application that would then go to multiple schools in the USA. I am also looking for a good Graduate University Program that combines elements of computer networking, e-commerce, telecommunications, etc Thanks in advance, John. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco Secure VPN BETA exam
243 Problems / 180 minutes Keep the MCNS 2.0 track, lots fill-blank, lots drap-drop, not easy. On 10 Sep 2000 09:36:15 -0400, [EMAIL PROTECTED] ("chung") wrote: >Hello!! > >I will take the Cisco Secure VPN BETA exam tomorrow!! Could anyone give >me some advice? Which topic should I focus? > >Thanks a lot!! > >Regards, >Tony > > >**NOTE: New CCNA/CCDA List has been formed. For more information go to >http://www.groupstudy.com/list/Associates.html >_ >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html >FAQ, list archives, and subscription info: http://www.groupstudy.com >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BCMSN: STP topology changes
I am not sure if it's me running on 50% power this Sunday morning (most likely), if it's the book that is written like a white house speech, or if it's both. Anyway, the reason for this e-mail is that I am reading something that to me doesn't make sense. For those of you who would like to comment on this, if you have Cisco Press' BCMSN book, I am refereing to "Handling Topology Changes in Spanning Tree" on pages 142 and 143. If you do not have that book, here's a quick description: Switch A is the ROOT bridge. Switch B and C are both connected to Switch A. Switch D is connected to both Switch B and C. Switch E is connected to Switch D. Since A and D can see each other through both Switch B and C, the connection between D and C is blocked. The situation is that Switch D's link to E fails, and Switch D sends a notice to Switch A (the root bridge) via Switch B. The root bridge (Switch A) now sets the topology change in its configuration for a period of time equal to the sum of the fwd delay and max age parameters. According to step 5 (in the book): "A bridge receiving the topology change configuration message from the root bridge uses the fwd delay timer to age out entries in its address table. This allows it to age out entries faster than the normal five-minute default so that stations that are no longer available due to the topology change will be aged out faster. It does this until it no longer receives topology change configuration messages from the root bridge." The last line in that quote makes it sound like it keeps receiving messages about the link E being down until it's up again - but what if the Switch E never comes up again because it was sold to someone else - will the root bridge keep sending messages about it forever??? - I don't think so, but that is how I read it. Can someone please clarify this for me? Thanks in advance, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.insync.net/~drews/ccnp **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Solaris station connect to the console?
Use tip to connect to the console. Make sure you load it up with 9600bps. tip -9600 /dev/ttya or ttyb ""zhi huan"" <[EMAIL PROTECTED]> wrote in message 8pcfgf$jb9$[EMAIL PROTECTED]">news:8pcfgf$jb9$[EMAIL PROTECTED]... > I have a Solaris workstation, how to connect the router console port through > serial port? > > Thanks in advance, > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Comment for: Appropriate to share Exam expereince????
Hi Just wondering...is it appropriate for one to share cisco exam experience? Personally i feel it is good to share experience as alot of ppl don't really have the experience of the actual exam. So once u have advice from others, u will not be so nervous during the exam as u will know what to expect like fill-in-the-blank, drag-n-drop etc However, will it degrade the certification value Nevethesness, one should also be well-prepare as you don't want to get the cert only but also the knowledge so that u can apply in your work :) Regards GO **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Zero CIR
Interesting thread. The company I work for is partnered with Sprint. When we sell frame service, 99% of the time we sell a 0 CIR unless there is voice involved. Have yet to have a problem with throughput. Scott Meyer CCNA, CCDA, MCSE, etc [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Lonnie Paschall Sent: Thursday, September 07, 2000 9:46 AM To: ElephantChild Cc: [EMAIL PROTECTED] Subject: Re: Zero CIR I agree "suckered" may not have been the best choice of wording to represent all who purchased a Zero CIR for the network. In some situations it my be appropriate. Lonnie - Original Message - From: "ElephantChild" <[EMAIL PROTECTED]> To: "Lonnie Paschall" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Thursday, September 07, 2000 9:46 AM Subject: Re: Zero CIR > On Thu, 7 Sep 2000, Lonnie Paschall wrote: > > > I am pretty sure it means that the carrier is no guaranteeing any data rate. > > I know some gov agencies that got suckered into that agreement years ago. > > Basically, that's what it means. But I would hesitate to use the word > "suckered". For one thing, it's dirt cheap. For another, it's basically > what you get from the Internet, so they should've known what they were > buying. "We'll do our best, but we can't guarantee that your data will > make it to the destination at all, let alone at any given rate" is what > "best effort" is all about. > > > "John lay" <[EMAIL PROTECTED]> wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Guys, > > > > > > Zero CIR means that the provider is comitted to provide nothing or there > > is > > > a mimimum ? > > -- > Bungee jumping and skydiving are for wimps. If you want to experience > true gut-wrenching terror, have children. --Dusty Rhoades. > ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Is this book necessary for 640-507?
u need that book (ICND) i use it to pass my CCNA 2.0 "Calvin Lai" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi. I'm new to the mailing list. > > I have been working in the IT industry for nearly 2 years now and the only > certification I have is my MCSE. For the past little while, I have been > doing some research on what certification I should obtain next. The Cisco > certification has really caught my eye. > > I've placed an order on that "CCNA: Cisco Certified Network Associate Study > Guide" book a few days ago, ISBN 0782126472. I also have that RouterSim > CCNA 2.0 Edition software and I have access to a Cisco 2501 Router to goof > around at home. > > There's another book out there called "Interconnecting Cisco Network > Devices", ISBN 1578701112. Should I get this book too to help me study for > the 640-507 exam? Or are the above 3 things that I have mentioned above > sufficient enough? > > Calvin Lai > [EMAIL PROTECTED] > http://members.home.net/ccslai > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Why do Labs use Serial vice Ethernet Connections
> In the HUTNIK and SATERLEE CCIE LAB BOOK, why do they always use >SERIAL (HSSI to HSSI)to SERIAL Connections, DCE clockrate =50. I would suspect the reason is that their configurations mirror the configurations long used in Cisco teaching labs. If you are preparing for the CCIE, you certainly should be able to modify the exercises unless the lab depends on something medium specific -- PPP, ISL, etc. >WHY CANT >the connections be made in Ethernet or Fast Ethernet with Crossover UTP >Cables? REASON!! I have only 2600's and 2500's--limited number of ETHERNET >PORTS avaialble, also crossover cable expensive!! >PS WHERE CAN I BUY CISCO ROUTERS USED FOR HOME CCIE LAB? I am tired of going >to lab site 50 miles away at 5 AM Sunday iits lonely. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco Secure VPN BETA exam
Hello!! I will take the Cisco Secure VPN BETA exam tomorrow!! Could anyone give me some advice? Which topic should I focus? Thanks a lot!! Regards, Tony **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Ip helper address
what about putting ip helper-address 10.10.10.255 ? instead of a zero.. what effect does that have? isnt the 255 used to send the broadcasts to all the servers on that subnet? jeff -Original Message- From: Dale Holmes [mailto:[EMAIL PROTECTED]] Sent: Fri, September 08, 2000 5:11 PM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: Ip helper address You have 2 DHCP servers on the same subnet??? This is probably not a good idea... it does not really provide redundancy or load balancing. The DHCP client will issue a request and accept the first response that it gets. If you split your scope such that half of your available addresses are on one server and half are on the other, you will *NOT* see that half of your clients use one server while half use the other. If for some reason one server always replies a nanosecond earlier than the other, then all clients will accept the response from that server. Once that server is out of addresses, it will start sending nack's. The clients will start accepting those nack's and will not request an address again, even though the other DHCP server may have dozens of free addresses to offer. SO - in answer to your question, the ip helper address of 10.10.10.0 will allow your client's requests to reach all DHCP servers on that subnet, HOWEVER they will only accept leases from the first server from which they receive a response. Chances are that server will be the same one all the time, even after it runs out of addresses to offer... You *could* set up your DHCP servers such that the scope on EACH ONE is sufficient to offer leases to ALL of you clients, but that is probably a less than efficient use of your address space. I hope that this helps... Dale [=`) >From: "Dennis Bates" <[EMAIL PROTECTED]> >Reply-To: "Dennis Bates" <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] >Subject: Ip helper address >Date: Fri, 8 Sep 2000 08:10:44 -0500 > >I am trying to put a statement on the remote router to allow the clients to >obtain an IP address accross the WAN. I have used the ip helper-address >command successfully. My problem is that i would like any of the DHCP >servers at the central site to be able to service DHCP requests from the >remote site. Do I have to use mutilple ip helper-address statements ? I >have tried a helper address pointing to the subnet, but that does not seem >to work. EX. i have DHCP servers at 10.10.10.10 and 10.10.10.11 do i have >to >use two seperate ip helper address statements or can i use ip >helper-address >10.10.10.0 ? > > >**NOTE: New CCNA/CCDA List has been formed. For more information go to >http://www.groupstudy.com/list/Associate-Announcement.html >_ >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html >FAQ, list archives, and subscription info: http://www.groupstudy.com >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associate-Announcement.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
cidr,route summarization
hi could someone tell me what is vlsm , route summarization and cidr maybe its the lack of grey matter in my head but cant seem to make out the diff btwn cidr and summarization thanx in advace.. jeff **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCXXproductions not in the US!
Guys, You guys outside of the US how did you manage to get the www.ccxxproductions.com training materials? Thanx ___ Say Bye to Slow Internet! http://www.home.com/xinbox/signup.html **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Two WAN conn.
Yeah the router will load balance between them depending on the switching process configured. Atif -Original Message- From: John Kaberna <[EMAIL PROTECTED]> To: Atif Awan <[EMAIL PROTECTED]>; Gunjan Mathur <[EMAIL PROTECTED]>; [EMAIL PROTECTED] <[EMAIL PROTECTED]> Date: Sunday, September 10, 2000 2:51 PM Subject: Re: Two WAN conn. >You can define as many default gateways and routes as you like. But will >the router use all of them equally is the question. > >- Original Message - >From: Atif Awan <[EMAIL PROTECTED]> >To: John Kaberna <[EMAIL PROTECTED]>; Gunjan Mathur ><[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> >Sent: Sunday, September 10, 2000 2:34 AM >Subject: RE: Two WAN conn. > > >> >> you can define two default gateways ... check it yourself if you have >access >> to a router. >> >> Atif >> >> -Original Message- >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of >> John Kaberna >> Sent: Sunday, September 10, 2000 1:58 PM >> To: Atif Awan; Gunjan Mathur; [EMAIL PROTECTED] >> Subject: Re: Two WAN conn. >> >> >> Show me where you read that having 2 default routes will automatically be >> load balanced. As far as I know that is not the case. It is also rare >that >> a provider will advertise any routes without using BGP. I have not heard >of >> any provider advertising default routes. I could be wrong and if so >please >> tell me where you found this info. >> >> John >> >> - Original Message - >> From: Atif Awan <[EMAIL PROTECTED]> >> To: John Kaberna <[EMAIL PROTECTED]>; Gunjan Mathur >> <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> >> Sent: Sunday, September 10, 2000 1:56 AM >> Subject: RE: Two WAN conn. >> >> >> > >> > If the links are from different providers then you will have to go for >> BGP. >> > If the links are from the same provider then you can make the provider >> > advertise default routes with the same metrics so that your router will >> > automatically load balance between the links. You can also define two >> > default routes with the same metrics and the router will load balance >> > between them. >> > >> > Regards >> > Atif >> > >> > >> > -Original Message- >> > From: John Kaberna [mailto:[EMAIL PROTECTED]] >> > Sent: Sunday, September 10, 2000 1:35 PM >> > To: Atif Awan; Gunjan Mathur; [EMAIL PROTECTED] >> > Subject: Re: Two WAN conn. >> > >> > >> > Can you run a routing protocol? If so, the router will automatically >load >> > balance across both links if they are both the same bandwidth. If you >use >> > default or static routes it will only use one link. >> > >> > - Original Message - >> > From: Atif Awan <[EMAIL PROTECTED]> >> > To: Gunjan Mathur <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> >> > Sent: Sunday, September 10, 2000 12:59 AM >> > Subject: RE: Two WAN conn. >> > >> > >> > > >> > > Will the other link be from the same provider ? >> > > >> > > >> > > -Original Message- >> > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of >> > > Gunjan Mathur >> > > Sent: Sunday, September 10, 2000 11:25 AM >> > > To: [EMAIL PROTECTED] >> > > Subject: Two WAN conn. >> > > >> > > >> > > Hi, >> > > >> > > I'm new to this field pls help me to confiure two >> > > serial connection. >> > > >> > > Right have I have one leased connection and I >> > > configured my router according to that and woriking >> > > fine with this. >> > > But now we are going to take one more leased line but >> > > I have no idea how to configure my router such a way >> > > that It route traffic in two connections. >> > > >> > > Right now I'm using Defualt gatewayt command for first >> > > leased connection now what I have to do for routing >> > > through both connections. >> > > >> > > And I aslo looking for a way through which I can >> > > balance the load in between two lines. And I f one >> > > goes down automatical data is switched to other one. >> > > >> > > >> > > TIA >> > > >> > > Gm >> > > >> > > >> > > __ >> > > Do You Yahoo!? >> > > Yahoo! Mail - Free email you can access from anywhere! >> > > http://mail.yahoo.com/ >> > > >> > > **NOTE: New CCNA/CCDA List has been formed. For more information go to >> > > http://www.groupstudy.com/list/Associates.html >> > > _ >> > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html >> > > FAQ, list archives, and subscription info: http://www.groupstudy.com >> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] >> > > >> > > **NOTE: New CCNA/CCDA List has been formed. For more information go to >> > > http://www.groupstudy.com/list/Associates.html >> > > _ >> > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html >> > > FAQ, list archives, and subscription info: http://www.groupstudy.com >> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] >> > >> > >> >> **NOTE: New CCNA/CCDA List has been formed. Fo
Re: netbios, whats it good for?
Useless Netbios traffic ??? All traffic serves a purpose :-) flem --- Trevor Corness <[EMAIL PROTECTED]> wrote: > Was not I, for I have yet to run a network with > AppleTalk on it.. though, I > did some sniffing on a contract, with 8 G4's on > site, as well as about 45 > WinNT4 machines.. and let me tell you, for a dotcom, > there was a LOT of > useless NetBIOS traffic going on.. and very > negligible amount of native > AppleTalk traffic. Actually considering buying a G4 > Cube for a toy :) > > Regards, > Trevor Corness, CCNA MCSE MCP+Internet A+ > Primary, SecureNet Central > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of > Priscilla Oppenheimer > Sent: September 6, 2000 6:21 PM > To: [EMAIL PROTECTED] > Subject: Re: netbios, whats it good for? > > > And who said AppleTalk was chatty? Someone who had > never used a Sniffer to > watch a PC running NetBIOS for Microsoft networking. > &;-) > > Priscilla > > At 08:38 PM 9/6/00, David Williams wrote: > >Netbios: access vs. excess. You decide. > > > >"beth shriver" <[EMAIL PROTECTED]> wrote in > message > >[EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > I was recently reading through one of laura > chappels > > > pod books that suggested netbios was not a good > thing > > > to have too much on the network. I just recently > took > > > a look at my network and i see a TON of it > flying > > > around! capturenet shows:tcp->NETBIOS-SSN > > > can you tell me what this netbios would be good > for > > > and if nothing how do i get rid of it? > > > thanks > > > Beth > > **NOTE: New CCNA/CCDA List has been formed. For more > information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: > http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: > http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Two WAN conn.
You can define as many default gateways and routes as you like. But will the router use all of them equally is the question. - Original Message - From: Atif Awan <[EMAIL PROTECTED]> To: John Kaberna <[EMAIL PROTECTED]>; Gunjan Mathur <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Sunday, September 10, 2000 2:34 AM Subject: RE: Two WAN conn. > > you can define two default gateways ... check it yourself if you have access > to a router. > > Atif > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > John Kaberna > Sent: Sunday, September 10, 2000 1:58 PM > To: Atif Awan; Gunjan Mathur; [EMAIL PROTECTED] > Subject: Re: Two WAN conn. > > > Show me where you read that having 2 default routes will automatically be > load balanced. As far as I know that is not the case. It is also rare that > a provider will advertise any routes without using BGP. I have not heard of > any provider advertising default routes. I could be wrong and if so please > tell me where you found this info. > > John > > - Original Message - > From: Atif Awan <[EMAIL PROTECTED]> > To: John Kaberna <[EMAIL PROTECTED]>; Gunjan Mathur > <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > Sent: Sunday, September 10, 2000 1:56 AM > Subject: RE: Two WAN conn. > > > > > > If the links are from different providers then you will have to go for > BGP. > > If the links are from the same provider then you can make the provider > > advertise default routes with the same metrics so that your router will > > automatically load balance between the links. You can also define two > > default routes with the same metrics and the router will load balance > > between them. > > > > Regards > > Atif > > > > > > -Original Message- > > From: John Kaberna [mailto:[EMAIL PROTECTED]] > > Sent: Sunday, September 10, 2000 1:35 PM > > To: Atif Awan; Gunjan Mathur; [EMAIL PROTECTED] > > Subject: Re: Two WAN conn. > > > > > > Can you run a routing protocol? If so, the router will automatically load > > balance across both links if they are both the same bandwidth. If you use > > default or static routes it will only use one link. > > > > - Original Message - > > From: Atif Awan <[EMAIL PROTECTED]> > > To: Gunjan Mathur <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > > Sent: Sunday, September 10, 2000 12:59 AM > > Subject: RE: Two WAN conn. > > > > > > > > > > Will the other link be from the same provider ? > > > > > > > > > -Original Message- > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > > > Gunjan Mathur > > > Sent: Sunday, September 10, 2000 11:25 AM > > > To: [EMAIL PROTECTED] > > > Subject: Two WAN conn. > > > > > > > > > Hi, > > > > > > I'm new to this field pls help me to confiure two > > > serial connection. > > > > > > Right have I have one leased connection and I > > > configured my router according to that and woriking > > > fine with this. > > > But now we are going to take one more leased line but > > > I have no idea how to configure my router such a way > > > that It route traffic in two connections. > > > > > > Right now I'm using Defualt gatewayt command for first > > > leased connection now what I have to do for routing > > > through both connections. > > > > > > And I aslo looking for a way through which I can > > > balance the load in between two lines. And I f one > > > goes down automatical data is switched to other one. > > > > > > > > > TIA > > > > > > Gm > > > > > > > > > __ > > > Do You Yahoo!? > > > Yahoo! Mail - Free email you can access from anywhere! > > > http://mail.yahoo.com/ > > > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > > > http://www.groupstudy.com/list/Associates.html > > > _ > > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > > > http://www.groupstudy.com/list/Associates.html > > > _ > > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDAT
RE: Two WAN conn.
you can define two default gateways ... check it yourself if you have access to a router. Atif -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of John Kaberna Sent: Sunday, September 10, 2000 1:58 PM To: Atif Awan; Gunjan Mathur; [EMAIL PROTECTED] Subject: Re: Two WAN conn. Show me where you read that having 2 default routes will automatically be load balanced. As far as I know that is not the case. It is also rare that a provider will advertise any routes without using BGP. I have not heard of any provider advertising default routes. I could be wrong and if so please tell me where you found this info. John - Original Message - From: Atif Awan <[EMAIL PROTECTED]> To: John Kaberna <[EMAIL PROTECTED]>; Gunjan Mathur <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Sunday, September 10, 2000 1:56 AM Subject: RE: Two WAN conn. > > If the links are from different providers then you will have to go for BGP. > If the links are from the same provider then you can make the provider > advertise default routes with the same metrics so that your router will > automatically load balance between the links. You can also define two > default routes with the same metrics and the router will load balance > between them. > > Regards > Atif > > > -Original Message- > From: John Kaberna [mailto:[EMAIL PROTECTED]] > Sent: Sunday, September 10, 2000 1:35 PM > To: Atif Awan; Gunjan Mathur; [EMAIL PROTECTED] > Subject: Re: Two WAN conn. > > > Can you run a routing protocol? If so, the router will automatically load > balance across both links if they are both the same bandwidth. If you use > default or static routes it will only use one link. > > - Original Message - > From: Atif Awan <[EMAIL PROTECTED]> > To: Gunjan Mathur <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > Sent: Sunday, September 10, 2000 12:59 AM > Subject: RE: Two WAN conn. > > > > > > Will the other link be from the same provider ? > > > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > > Gunjan Mathur > > Sent: Sunday, September 10, 2000 11:25 AM > > To: [EMAIL PROTECTED] > > Subject: Two WAN conn. > > > > > > Hi, > > > > I'm new to this field pls help me to confiure two > > serial connection. > > > > Right have I have one leased connection and I > > configured my router according to that and woriking > > fine with this. > > But now we are going to take one more leased line but > > I have no idea how to configure my router such a way > > that It route traffic in two connections. > > > > Right now I'm using Defualt gatewayt command for first > > leased connection now what I have to do for routing > > through both connections. > > > > And I aslo looking for a way through which I can > > balance the load in between two lines. And I f one > > goes down automatical data is switched to other one. > > > > > > TIA > > > > Gm > > > > > > __ > > Do You Yahoo!? > > Yahoo! Mail - Free email you can access from anywhere! > > http://mail.yahoo.com/ > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > > http://www.groupstudy.com/list/Associates.html > > _ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > > http://www.groupstudy.com/list/Associates.html > > _ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE LAB SERIAL VICE ETHERNET CONNECTIONS--WHY?
In the HUTNIK and SATERLEE CCIE LAB BOOK, why do they always use SERIAL (HSSI to HSSI)to SERIAL Connections, DCE clockrate =50. WHY CANT the connections be made in Ethernet or Fast Ethernet with Crossover UTP Cables? REASON!! I have only 2600's and 2500's--limited number of ETHERNET PORTS avaialble, also crossover cable expensive!! PS WHERE CAN I BUY CISCO ROUTERS USED FOR HOME CCIE LAB? I am tired of going to lab site 50 miles away at 5 AM Sunday iits lonely. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Why do Labs use Serial vice Ethernet Connections
In the HUTNIK and SATERLEE CCIE LAB BOOK, why do they always use SERIAL (HSSI to HSSI)to SERIAL Connections, DCE clockrate =50. WHY CANT the connections be made in Ethernet or Fast Ethernet with Crossover UTP Cables? REASON!! I have only 2600's and 2500's--limited number of ETHERNET PORTS avaialble, also crossover cable expensive!! PS WHERE CAN I BUY CISCO ROUTERS USED FOR HOME CCIE LAB? I am tired of going to lab site 50 miles away at 5 AM Sunday iits lonely. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Two WAN conn.
Running BGP if you have onlyone provider is not a big ask so the provider can be asked to do it. About advertising default routes, i was not referring to BGP. You see here in pakistan you can make the provdier do anything :) so i dont blame you for not seeing a provider advertise default routes. Come to pakistan and i will show u ;) About the router load balancing between two default routes; well i read it on CCO. I will confirm it after testing it too. Maybe someone else can shed some light on this one. Atif -Original Message- From: John Kaberna [mailto:[EMAIL PROTECTED]] Sent: Sunday, September 10, 2000 1:58 PM To: Atif Awan; Gunjan Mathur; [EMAIL PROTECTED] Subject: Re: Two WAN conn. Show me where you read that having 2 default routes will automatically be load balanced. As far as I know that is not the case. It is also rare that a provider will advertise any routes without using BGP. I have not heard of any provider advertising default routes. I could be wrong and if so please tell me where you found this info. John - Original Message - From: Atif Awan <[EMAIL PROTECTED]> To: John Kaberna <[EMAIL PROTECTED]>; Gunjan Mathur <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Sunday, September 10, 2000 1:56 AM Subject: RE: Two WAN conn. > > If the links are from different providers then you will have to go for BGP. > If the links are from the same provider then you can make the provider > advertise default routes with the same metrics so that your router will > automatically load balance between the links. You can also define two > default routes with the same metrics and the router will load balance > between them. > > Regards > Atif > > > -Original Message- > From: John Kaberna [mailto:[EMAIL PROTECTED]] > Sent: Sunday, September 10, 2000 1:35 PM > To: Atif Awan; Gunjan Mathur; [EMAIL PROTECTED] > Subject: Re: Two WAN conn. > > > Can you run a routing protocol? If so, the router will automatically load > balance across both links if they are both the same bandwidth. If you use > default or static routes it will only use one link. > > - Original Message - > From: Atif Awan <[EMAIL PROTECTED]> > To: Gunjan Mathur <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > Sent: Sunday, September 10, 2000 12:59 AM > Subject: RE: Two WAN conn. > > > > > > Will the other link be from the same provider ? > > > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > > Gunjan Mathur > > Sent: Sunday, September 10, 2000 11:25 AM > > To: [EMAIL PROTECTED] > > Subject: Two WAN conn. > > > > > > Hi, > > > > I'm new to this field pls help me to confiure two > > serial connection. > > > > Right have I have one leased connection and I > > configured my router according to that and woriking > > fine with this. > > But now we are going to take one more leased line but > > I have no idea how to configure my router such a way > > that It route traffic in two connections. > > > > Right now I'm using Defualt gatewayt command for first > > leased connection now what I have to do for routing > > through both connections. > > > > And I aslo looking for a way through which I can > > balance the load in between two lines. And I f one > > goes down automatical data is switched to other one. > > > > > > TIA > > > > Gm > > > > > > __ > > Do You Yahoo!? > > Yahoo! Mail - Free email you can access from anywhere! > > http://mail.yahoo.com/ > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > > http://www.groupstudy.com/list/Associates.html > > _ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > > http://www.groupstudy.com/list/Associates.html > > _ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Two WAN conn.
Show me where you read that having 2 default routes will automatically be load balanced. As far as I know that is not the case. It is also rare that a provider will advertise any routes without using BGP. I have not heard of any provider advertising default routes. I could be wrong and if so please tell me where you found this info. John - Original Message - From: Atif Awan <[EMAIL PROTECTED]> To: John Kaberna <[EMAIL PROTECTED]>; Gunjan Mathur <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Sunday, September 10, 2000 1:56 AM Subject: RE: Two WAN conn. > > If the links are from different providers then you will have to go for BGP. > If the links are from the same provider then you can make the provider > advertise default routes with the same metrics so that your router will > automatically load balance between the links. You can also define two > default routes with the same metrics and the router will load balance > between them. > > Regards > Atif > > > -Original Message- > From: John Kaberna [mailto:[EMAIL PROTECTED]] > Sent: Sunday, September 10, 2000 1:35 PM > To: Atif Awan; Gunjan Mathur; [EMAIL PROTECTED] > Subject: Re: Two WAN conn. > > > Can you run a routing protocol? If so, the router will automatically load > balance across both links if they are both the same bandwidth. If you use > default or static routes it will only use one link. > > - Original Message - > From: Atif Awan <[EMAIL PROTECTED]> > To: Gunjan Mathur <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > Sent: Sunday, September 10, 2000 12:59 AM > Subject: RE: Two WAN conn. > > > > > > Will the other link be from the same provider ? > > > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > > Gunjan Mathur > > Sent: Sunday, September 10, 2000 11:25 AM > > To: [EMAIL PROTECTED] > > Subject: Two WAN conn. > > > > > > Hi, > > > > I'm new to this field pls help me to confiure two > > serial connection. > > > > Right have I have one leased connection and I > > configured my router according to that and woriking > > fine with this. > > But now we are going to take one more leased line but > > I have no idea how to configure my router such a way > > that It route traffic in two connections. > > > > Right now I'm using Defualt gatewayt command for first > > leased connection now what I have to do for routing > > through both connections. > > > > And I aslo looking for a way through which I can > > balance the load in between two lines. And I f one > > goes down automatical data is switched to other one. > > > > > > TIA > > > > Gm > > > > > > __ > > Do You Yahoo!? > > Yahoo! Mail - Free email you can access from anywhere! > > http://mail.yahoo.com/ > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > > http://www.groupstudy.com/list/Associates.html > > _ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > > http://www.groupstudy.com/list/Associates.html > > _ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Two WAN conn.
If the links are from different providers then you will have to go for BGP. If the links are from the same provider then you can make the provider advertise default routes with the same metrics so that your router will automatically load balance between the links. You can also define two default routes with the same metrics and the router will load balance between them. Regards Atif -Original Message- From: John Kaberna [mailto:[EMAIL PROTECTED]] Sent: Sunday, September 10, 2000 1:35 PM To: Atif Awan; Gunjan Mathur; [EMAIL PROTECTED] Subject: Re: Two WAN conn. Can you run a routing protocol? If so, the router will automatically load balance across both links if they are both the same bandwidth. If you use default or static routes it will only use one link. - Original Message - From: Atif Awan <[EMAIL PROTECTED]> To: Gunjan Mathur <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Sunday, September 10, 2000 12:59 AM Subject: RE: Two WAN conn. > > Will the other link be from the same provider ? > > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Gunjan Mathur > Sent: Sunday, September 10, 2000 11:25 AM > To: [EMAIL PROTECTED] > Subject: Two WAN conn. > > > Hi, > > I'm new to this field pls help me to confiure two > serial connection. > > Right have I have one leased connection and I > configured my router according to that and woriking > fine with this. > But now we are going to take one more leased line but > I have no idea how to configure my router such a way > that It route traffic in two connections. > > Right now I'm using Defualt gatewayt command for first > leased connection now what I have to do for routing > through both connections. > > And I aslo looking for a way through which I can > balance the load in between two lines. And I f one > goes down automatical data is switched to other one. > > > TIA > > Gm > > > __ > Do You Yahoo!? > Yahoo! Mail - Free email you can access from anywhere! > http://mail.yahoo.com/ > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: password and enblepass commands on catalyst 6509
Just type set password or set enablepass. It will prompt you for the old password then tell you to enter the new password and confirm. It's not like a router where you do it all in one command. - Original Message - From: Lists Wizard <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; 'Cisco group study' <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Saturday, September 09, 2000 11:14 PM Subject: password and enblepass commands on catalyst 6509 > Hi , > > I have a problem getting new passwords to work on the Catalyst 6509 switch > that i have on the job. I logged to the switch from the network using > tacacs+ account. I pasted what I did below. Please help me figure out what > the problem is. > > > Thanks > > == > > > 6509-1> (enable) set password consolepass > Usage: set password > 6509-1> (enable) set enablepass enable > Usage: set enablepass > 6509-1> (enable) disable > 6509-1> enable > Password: > > % Authentication failed. > Password: > > % Authentication failed. > Password: > > % Authentication failed. > Sorry > 6509-1> enable > Password: > 6509-1> (enable) > > > __ > Do You Yahoo!? > Talk to your friends online with Yahoo! Messenger. > http://im.yahoo.com > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BGP on 2600?
You can run BGP on a 2600 with 64MB of RAM with full BGP routes, but I wouldn't suggest it. I've actually done it before If you have a very stable link it is possible. But, even with 128mb of memory the processor is not very fast to handle frequent route flaps. John - Original Message - From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Sunday, September 10, 2000 2:00 AM Subject: RE: BGP on 2600? > Hi, > >It is true that untill now you couldn't install 128MB of DRAM on a 2600 > router, but a few weeks ago Cisco lonch another two 2600 router types the > 2650 and the 2651 both more powreful routers with more DRAM capacity until > 128MB of DRAM a thing you could have done until now only from the 3640 > router. BUT NO MORE. > > GIL > CCNA/CCDA > > -Original Message- > From: Aaron Moreau-Cook [mailto:[EMAIL PROTECTED]] > Sent: ??? 09 ?? 2000 13:23 > To: [EMAIL PROTECTED] > Subject: BGP on 2600? > > > I read a few weeks back that someone has a 2600 series router with 128mb RAM > in in. > > Can someone confirm, or deny that you can put 128mb RAM in a 2600? > > Thanks > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > This email was scanned using ESPG @ PubliCom Haifa. > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Two WAN conn.
Can you run a routing protocol? If so, the router will automatically load balance across both links if they are both the same bandwidth. If you use default or static routes it will only use one link. - Original Message - From: Atif Awan <[EMAIL PROTECTED]> To: Gunjan Mathur <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Sunday, September 10, 2000 12:59 AM Subject: RE: Two WAN conn. > > Will the other link be from the same provider ? > > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Gunjan Mathur > Sent: Sunday, September 10, 2000 11:25 AM > To: [EMAIL PROTECTED] > Subject: Two WAN conn. > > > Hi, > > I'm new to this field pls help me to confiure two > serial connection. > > Right have I have one leased connection and I > configured my router according to that and woriking > fine with this. > But now we are going to take one more leased line but > I have no idea how to configure my router such a way > that It route traffic in two connections. > > Right now I'm using Defualt gatewayt command for first > leased connection now what I have to do for routing > through both connections. > > And I aslo looking for a way through which I can > balance the load in between two lines. And I f one > goes down automatical data is switched to other one. > > > TIA > > Gm > > > __ > Do You Yahoo!? > Yahoo! Mail - Free email you can access from anywhere! > http://mail.yahoo.com/ > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
password and enblepass commands on catalyst 6509
Hi , I have a problem getting new passwords to work on the Catalyst 6509 switch that i have on the job. I logged to the switch from the network using tacacs+ account. I pasted what I did below. Please help me figure out what the problem is. Thanks == 6509-1> (enable) set password consolepass Usage: set password 6509-1> (enable) set enablepass enable Usage: set enablepass 6509-1> (enable) disable 6509-1> enable Password: % Authentication failed. Password: % Authentication failed. Password: % Authentication failed. Sorry 6509-1> enable Password: 6509-1> (enable) __ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BGP on 2600?
Hi, It is true that untill now you couldn't install 128MB of DRAM on a 2600 router, but a few weeks ago Cisco lonch another two 2600 router types the 2650 and the 2651 both more powreful routers with more DRAM capacity until 128MB of DRAM a thing you could have done until now only from the 3640 router. BUT NO MORE. GIL CCNA/CCDA -Original Message- From: Aaron Moreau-Cook [mailto:[EMAIL PROTECTED]] Sent: ??? 09 ?? 2000 13:23 To: [EMAIL PROTECTED] Subject: BGP on 2600? I read a few weeks back that someone has a 2600 series router with 128mb RAM in in. Can someone confirm, or deny that you can put 128mb RAM in a 2600? Thanks **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] This email was scanned using ESPG @ PubliCom Haifa. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Two WAN conn.
Will the other link be from the same provider ? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Gunjan Mathur Sent: Sunday, September 10, 2000 11:25 AM To: [EMAIL PROTECTED] Subject: Two WAN conn. Hi, I'm new to this field pls help me to confiure two serial connection. Right have I have one leased connection and I configured my router according to that and woriking fine with this. But now we are going to take one more leased line but I have no idea how to configure my router such a way that It route traffic in two connections. Right now I'm using Defualt gatewayt command for first leased connection now what I have to do for routing through both connections. And I aslo looking for a way through which I can balance the load in between two lines. And I f one goes down automatical data is switched to other one. TIA Gm __ Do You Yahoo!? Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Linux Proxy server and 1700 using NAT
But how does the Linux Box get the IP-Adress of the ISP ? You would need it on the linux box if you want to run nat there ... I would run nat only on the Cisco1720. The router just has to translate the outside IP of the linux box to the public IP assigned by the ISP. Assuming you disable routing on the linux box and you will use proxy- services (squid, socks5, fwtk) to provide controlled internet access to the users. hth Reinhold -- Reinhold Fischer CCNP/SunCSA/HP Certified Consultant for Network Management On Sat, 9 Sep 2000, Trevor Corness wrote: > Yes, definately. Don't run NAT on the Router, only use it on the Linux box. > I assume you have a LAN of a few (or more) PCs on the other side of the > Linux box. You will need a cross-over UTP cable (best solution) and then > set it up similiar to this : > > Internal PCs (2, 10, 50, 2000) > || > Ethernet/FE Switch > | > Linux Internal NIC1 (Inside address) > Linux PC > Linux External NIC2 (Outside address) > X (cross-over cable) > X > Eth 0 >1720 Router > WIC 0 WIC 1 > I I > I I >PSTNPSTN > > Basically, use a switch/hub with your internal PCs hooked up in a LAN > configuration. Plug the Inside IP NIC of the Linux box into that > hub/switch. This completes your internal network. > > Use a crossover cable to connect your Outside (Live) IP NIC to the E0 of the > 1720 router. This is a separate cable segment, with 2 nodes.. E0, and the > NIC (xl1 or whatever). > > As usual, have your 2 WICs connecting the PSTN as they do now. > > This is best, as the Linux box now also segments all the broadcast traffic > and "crap" from the LAN side, and blocks that traffic from "sneaking" out > into the "real" world. I have done this several times in the past, and it > works fine. > > Regards, > Trevor Corness, CCNA MCSE MCP+Internet > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Shane Stockman > Sent: September 9, 2000 1:43 PM > To: [EMAIL PROTECTED] > Subject: Linux Proxy server and 1700 using NAT > > > I have a cisco 1720 with 2xISDN WIC cards and a Linux Proxy Server with > 2xNIC's. I need to know whether I can use 1 nic for the internal address and > another for the global addresse's given by the ISP using only one ethernet > port of the 1720. > > >-Proxy--NIC1(Internal) -Router-ISDN WIC 0---|-->PSTN >-Server-NIC2(Outside )>-Eth0---ISDN WIC 1---| > > > Sorry for the sketch > I also need to connect the Proxy to a 2924 for 8 users > Is this possible ? > > Any Solution > > Thanks > > _ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > > Share information about yourself, create your own public profile at > http://profiles.msn.com. > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Configuring a DHCP Server using 3620
Hey, Adele, you're working too hard. Sorry I missed the Sac group meeting last week. It's been busy at work. For info on the IOS DHCP server. Check out: http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120 t/120t1/easyip2.htm watch the word wrap requires IOS 12.x with the firewall feature set ( if I read the docs correctly ) Cisco does appear to sell a DHPC/DNS server application. http://www.cisco.com/univercd/cc/td/doc/pcat/dnmn.htm according to this doc, it runs on Solaris, HP-UX, and IBM AIX, as well as Win NT As to the last question, when to use 192.168.x.x versus 10.0.0.0, the answer is ( all together, everyone ) it depends. If all you need is a prefix of /24, it really doesn't matter where you take it from. 10.75.1.0/24 is the same as 172.20.250.0/24 is the same as 192.168.21.0/24, if you get my drift. The more important consideration is the design plan, IMHO Or whether the space you pick falls into your lucky number scheme. One of these days I'm going to have to post my design for the brokerage firm, just to see what kind of laughs it generates. I think I still have the router configs and documentation package around here somewhere. HTH Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Adele Galus Sent: Saturday, September 09, 2000 9:44 PM To: [EMAIL PROTECTED] Subject:Configuring a DHCP Server using 3620 Hi All; I was looking for configurations on a 3620 to figure out how I can allow for traffic when the DHCP is assign IP addresses. I have seen that Cisco has their version of DHCP but this is not for an NT box. Would I be using an access-list? Also, when would you suggest using 192.168.0.0 vs 10.10.0.0 for setting private on IP address on a DHCP? My thoughts make it simple for the user. Using the 10.10.0.0 should be used by the professionals. I am on a mission. Appreciate the advice. Thanks a million. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Two WAN Conn.
Hi, I'm new to this field pls help me to confiure two serial connection. Right have I have one leased connection and I configured my router according to that and woriking fine with this. But now we are going to take one more leased line but I have no idea how to configure my router such a way that It route traffic in two connections. Right now I'm using Defualt gatewayt command for first leased connection now what I have to do for routing through both connections. And I aslo looking for a way through which I can balance the load in between two lines. And I f one goes down automatical data is switched to other one. TIA Gm __ Do You Yahoo!? Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Two WAN conn.
Hi, I'm new to this field pls help me to confiure two serial connection. Right have I have one leased connection and I configured my router according to that and woriking fine with this. But now we are going to take one more leased line but I have no idea how to configure my router such a way that It route traffic in two connections. Right now I'm using Defualt gatewayt command for first leased connection now what I have to do for routing through both connections. And I aslo looking for a way through which I can balance the load in between two lines. And I f one goes down automatical data is switched to other one. TIA Gm __ Do You Yahoo!? Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]