Re: Using a 2611 as an ISL router for a 2924 switch
Try 802.1q, it probably will work on your router. ""Sean Graham"" <[EMAIL PROTECTED]> ¼¶¼g©ó¶l¥ó 99qqjt$3me$[EMAIL PROTECTED]">news:99qqjt$3me$[EMAIL PROTECTED]... > The first question I have..is the above possible with a 2611 router with a > Fast Ethernet module install, with 48MB DRAM and IOS 12.1. It also has 2 > Wic-1T serial cards. > > The Cisco web site has configuration examples based on 2620's but doesn't > mention the 2611. I have had this working using a 3620 OK. But am not able > to get this working using the 2611 I am receiving various errors on both the > router and the switch. > > I am wondering as the config is fairly straight forward is this actually > possible with this router. > > Any thoughts would be appreciated > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Using a 2611 as an ISL router for a 2924 switch
A VLAN trunk can only be configured on a Fast-Ethernet or Gig-Ethernet interface. The 2611 of course is only 10MB interface. Chris Lemagie -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Sean Graham Sent: Tuesday, March 27, 2001 10:34 AM To: [EMAIL PROTECTED] Subject: Using a 2611 as an ISL router for a 2924 switch The first question I have..is the above possible with a 2611 router with a Fast Ethernet module install, with 48MB DRAM and IOS 12.1. It also has 2 Wic-1T serial cards. The Cisco web site has configuration examples based on 2620's but doesn't mention the 2611. I have had this working using a 3620 OK. But am not able to get this working using the 2611 I am receiving various errors on both the router and the switch. I am wondering as the config is fairly straight forward is this actually possible with this router. Any thoughts would be appreciated _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Using a 2611 as an ISL router for a 2924 switch
I am using a FastEthernet 100mbp module. I used the same one in a 3620 which did work. ""Chris Lemagie"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > A VLAN trunk can only be configured on a Fast-Ethernet or Gig-Ethernet > interface. The 2611 of course is only 10MB interface. > > Chris Lemagie > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Sean Graham > Sent: Tuesday, March 27, 2001 10:34 AM > To: [EMAIL PROTECTED] > Subject: Using a 2611 as an ISL router for a 2924 switch > > > The first question I have..is the above possible with a 2611 router with a > Fast Ethernet module install, with 48MB DRAM and IOS 12.1. It also has 2 > Wic-1T serial cards. > > The Cisco web site has configuration examples based on 2620's but doesn't > mention the 2611. I have had this working using a 3620 OK. But am not able > to get this working using the 2611 I am receiving various errors on both the > router and the switch. > > I am wondering as the config is fairly straight forward is this actually > possible with this router. > > Any thoughts would be appreciated > > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Using a 2611 as an ISL router for a 2924 switch
ahhh, my favorite thread is back. http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600/net_m od2/ovrnetm.htm#14116 says that a FE module is not supported in the 2600 series. It doesn't say it won't work but it does says it's not supported. If you try to configure That's why the 2620's are quoted - they have 10/100 ports as part of their base config. But you could be mislead by: http://www.cisco.com/warp/public/cc/pd/rt/2600/prodlit/2636m_ds.htm But, if you read the doc there is a table that says that none of the FE modules are avail for the 2600 series. Also, if you go here: http://www.cisco.com/pcgi-bin/finder/msbsearch.pl and use "Search#2" and search on NM-1FE-TX the results show the module and report and say that it is not available for the 2600 series. But it is ok with 3600 series routers. Take a look at http://www.cisco.com/go/module for all your questions on 2600/3600 routers. Yeah, we've had this discussion before. If a reseller sold you this module expressly for the 2611, return it. If they sold it to you for a 3600 and you decided to try it in the 2611 - well, you got the results that CCO predicts. Kevin Wigle "Sean Graham" <[EMAIL PROTECTED]> wrote in message 99qqjt$3me$[EMAIL PROTECTED]">news:99qqjt$3me$[EMAIL PROTECTED]... > The first question I have..is the above possible with a 2611 router with a > Fast Ethernet module install, with 48MB DRAM and IOS 12.1. It also has 2 > Wic-1T serial cards. > > The Cisco web site has configuration examples based on 2620's but doesn't > mention the 2611. I have had this working using a 3620 OK. But am not able > to get this working using the 2611 I am receiving various errors on both the > router and the switch. > > I am wondering as the config is fairly straight forward is this actually > possible with this router. > > Any thoughts would be appreciated _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Using a 2611 as an ISL router for a 2924 switch
Regarding to Kevin's link, cisco 2600 series will not support fast ethernet module. All you can do is that you can play around 802.1q trunking with your 2924xl. ""Sean Graham"" <[EMAIL PROTECTED]> ¼¶¼g©ó¶l¥ó 99qqjt$3me$[EMAIL PROTECTED]">news:99qqjt$3me$[EMAIL PROTECTED]... > The first question I have..is the above possible with a 2611 router with a > Fast Ethernet module install, with 48MB DRAM and IOS 12.1. It also has 2 > Wic-1T serial cards. > > The Cisco web site has configuration examples based on 2620's but doesn't > mention the 2611. I have had this working using a 3620 OK. But am not able > to get this working using the 2611 I am receiving various errors on both the > router and the switch. > > I am wondering as the config is fairly straight forward is this actually > possible with this router. > > Any thoughts would be appreciated > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Using a 2611 as an ISL router for a 2924 switch
I would check the IOS feature set next. You will need IP Plus at a minimum to enable VLAN routing.. Chris Lemagie -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Sean Graham Sent: Tuesday, March 27, 2001 11:19 AM To: [EMAIL PROTECTED] Subject: Re: Using a 2611 as an ISL router for a 2924 switch I am using a FastEthernet 100mbp module. I used the same one in a 3620 which did work. ""Chris Lemagie"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > A VLAN trunk can only be configured on a Fast-Ethernet or Gig-Ethernet > interface. The 2611 of course is only 10MB interface. > > Chris Lemagie > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Sean Graham > Sent: Tuesday, March 27, 2001 10:34 AM > To: [EMAIL PROTECTED] > Subject: Using a 2611 as an ISL router for a 2924 switch > > > The first question I have..is the above possible with a 2611 router with a > Fast Ethernet module install, with 48MB DRAM and IOS 12.1. It also has 2 > Wic-1T serial cards. > > The Cisco web site has configuration examples based on 2620's but doesn't > mention the 2611. I have had this working using a 3620 OK. But am not able > to get this working using the 2611 I am receiving various errors on both the > router and the switch. > > I am wondering as the config is fairly straight forward is this actually > possible with this router. > > Any thoughts would be appreciated > > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Using a 2611 as an ISL router for a 2924 switch
Ok, I give up...what is a 2621 then if the FE doesn't work on the 2600 series ? - Original Message - From: "Kevin Wigle" <[EMAIL PROTECTED]> To: "cisco" <[EMAIL PROTECTED]> Cc: "Sean Graham" <[EMAIL PROTECTED]> Sent: Tuesday, March 27, 2001 11:21 AM Subject: Re: Using a 2611 as an ISL router for a 2924 switch > ahhh, my favorite thread is back. > > http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600/net_m > od2/ovrnetm.htm#14116 > > says that a FE module is not supported in the 2600 series. > > It doesn't say it won't work but it does says it's not supported. If you > try to configure > > That's why the 2620's are quoted - they have 10/100 ports as part of their > base config. > > But you could be mislead by: > > http://www.cisco.com/warp/public/cc/pd/rt/2600/prodlit/2636m_ds.htm > > But, if you read the doc there is a table that says that none of the FE > modules are avail for the 2600 series. > > Also, if you go here: > > http://www.cisco.com/pcgi-bin/finder/msbsearch.pl > > and use "Search#2" and search on NM-1FE-TX the results show the module and > report and say that it is not available for the 2600 series. But it is ok > with 3600 series routers. > > Take a look at http://www.cisco.com/go/module for all your questions on > 2600/3600 routers. > > > Yeah, we've had this discussion before. > > If a reseller sold you this module expressly for the 2611, return it. If > they sold it to you for a 3600 and you decided to try it in the 2611 - well, > you got the results that CCO predicts. > > Kevin Wigle > > > > "Sean Graham" <[EMAIL PROTECTED]> wrote in message > 99qqjt$3me$[EMAIL PROTECTED]">news:99qqjt$3me$[EMAIL PROTECTED]... > > The first question I have..is the above possible with a 2611 router with a > > Fast Ethernet module install, with 48MB DRAM and IOS 12.1. It also has 2 > > Wic-1T serial cards. > > > > The Cisco web site has configuration examples based on 2620's but doesn't > > mention the 2611. I have had this working using a 3620 OK. But am not able > > to get this working using the 2611 I am receiving various errors on both > the > > router and the switch. > > > > I am wondering as the config is fairly straight forward is this actually > > possible with this router. > > > > Any thoughts would be appreciated > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Using a 2611 as an ISL router for a 2924 switch
the 2621 has two "built-in" FE ports. that is to say, the FE ports are NOT on a module. that's why they are called FIXED lan ports. just like the 2650,2651 and 2620. There is probably some architectural difference between "modules" and ports directly attached to the mother board. More than that, I can't say - ask TAC. Kevin Wigle - Original Message - From: "perryb" <[EMAIL PROTECTED]> To: "Kevin Wigle" <[EMAIL PROTECTED]>; "cisco" <[EMAIL PROTECTED]> Cc: "Sean Graham" <[EMAIL PROTECTED]> Sent: Tuesday, March 27, 2001 3:44 PM Subject: Re: Using a 2611 as an ISL router for a 2924 switch > Ok, I give up...what is a 2621 then if the FE doesn't work on the 2600 > series ? > > > - Original Message - > From: "Kevin Wigle" <[EMAIL PROTECTED]> > To: "cisco" <[EMAIL PROTECTED]> > Cc: "Sean Graham" <[EMAIL PROTECTED]> > Sent: Tuesday, March 27, 2001 11:21 AM > Subject: Re: Using a 2611 as an ISL router for a 2924 switch > > > > ahhh, my favorite thread is back. > > > > > http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600/net_m > > od2/ovrnetm.htm#14116 > > > > says that a FE module is not supported in the 2600 series. > > > > It doesn't say it won't work but it does says it's not supported. If you > > try to configure > > > > That's why the 2620's are quoted - they have 10/100 ports as part of their > > base config. > > > > But you could be mislead by: > > > > http://www.cisco.com/warp/public/cc/pd/rt/2600/prodlit/2636m_ds.htm > > > > But, if you read the doc there is a table that says that none of the FE > > modules are avail for the 2600 series. > > > > Also, if you go here: > > > > http://www.cisco.com/pcgi-bin/finder/msbsearch.pl > > > > and use "Search#2" and search on NM-1FE-TX the results show the module and > > report and say that it is not available for the 2600 series. But it is ok > > with 3600 series routers. > > > > Take a look at http://www.cisco.com/go/module for all your questions on > > 2600/3600 routers. > > > > > > Yeah, we've had this discussion before. > > > > If a reseller sold you this module expressly for the 2611, return it. If > > they sold it to you for a 3600 and you decided to try it in the 2611 - > well, > > you got the results that CCO predicts. > > > > Kevin Wigle > > > > > > > > "Sean Graham" <[EMAIL PROTECTED]> wrote in message > > 99qqjt$3me$[EMAIL PROTECTED]">news:99qqjt$3me$[EMAIL PROTECTED]... > > > The first question I have..is the above possible with a 2611 router with > a > > > Fast Ethernet module install, with 48MB DRAM and IOS 12.1. It also has 2 > > > Wic-1T serial cards. > > > > > > The Cisco web site has configuration examples based on 2620's but > doesn't > > > mention the 2611. I have had this working using a 3620 OK. But am not > able > > > to get this working using the 2611 I am receiving various errors on both > > the > > > router and the switch. > > > > > > I am wondering as the config is fairly straight forward is this actually > > > possible with this router. > > > > > > Any thoughts would be appreciated > > > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Using a 2611 as an ISL router for a 2924 switch
The 262x routers also have stronger processors than the 261x routers. Chris Lemagie -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Kevin Wigle Sent: Tuesday, March 27, 2001 1:03 PM To: perryb; cisco Cc: Sean Graham Subject: Re: Using a 2611 as an ISL router for a 2924 switch the 2621 has two "built-in" FE ports. that is to say, the FE ports are NOT on a module. that's why they are called FIXED lan ports. just like the 2650,2651 and 2620. There is probably some architectural difference between "modules" and ports directly attached to the mother board. More than that, I can't say - ask TAC. Kevin Wigle - Original Message - From: "perryb" <[EMAIL PROTECTED]> To: "Kevin Wigle" <[EMAIL PROTECTED]>; "cisco" <[EMAIL PROTECTED]> Cc: "Sean Graham" <[EMAIL PROTECTED]> Sent: Tuesday, March 27, 2001 3:44 PM Subject: Re: Using a 2611 as an ISL router for a 2924 switch > Ok, I give up...what is a 2621 then if the FE doesn't work on the 2600 > series ? > > > - Original Message - > From: "Kevin Wigle" <[EMAIL PROTECTED]> > To: "cisco" <[EMAIL PROTECTED]> > Cc: "Sean Graham" <[EMAIL PROTECTED]> > Sent: Tuesday, March 27, 2001 11:21 AM > Subject: Re: Using a 2611 as an ISL router for a 2924 switch > > > > ahhh, my favorite thread is back. > > > > > http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600/net_m > > od2/ovrnetm.htm#14116 > > > > says that a FE module is not supported in the 2600 series. > > > > It doesn't say it won't work but it does says it's not supported. If you > > try to configure > > > > That's why the 2620's are quoted - they have 10/100 ports as part of their > > base config. > > > > But you could be mislead by: > > > > http://www.cisco.com/warp/public/cc/pd/rt/2600/prodlit/2636m_ds.htm > > > > But, if you read the doc there is a table that says that none of the FE > > modules are avail for the 2600 series. > > > > Also, if you go here: > > > > http://www.cisco.com/pcgi-bin/finder/msbsearch.pl > > > > and use "Search#2" and search on NM-1FE-TX the results show the module and > > report and say that it is not available for the 2600 series. But it is ok > > with 3600 series routers. > > > > Take a look at http://www.cisco.com/go/module for all your questions on > > 2600/3600 routers. > > > > > > Yeah, we've had this discussion before. > > > > If a reseller sold you this module expressly for the 2611, return it. If > > they sold it to you for a 3600 and you decided to try it in the 2611 - > well, > > you got the results that CCO predicts. > > > > Kevin Wigle > > > > > > > > "Sean Graham" <[EMAIL PROTECTED]> wrote in message > > 99qqjt$3me$[EMAIL PROTECTED]">news:99qqjt$3me$[EMAIL PROTECTED]... > > > The first question I have..is the above possible with a 2611 router with > a > > > Fast Ethernet module install, with 48MB DRAM and IOS 12.1. It also has 2 > > > Wic-1T serial cards. > > > > > > The Cisco web site has configuration examples based on 2620's but > doesn't > > > mention the 2611. I have had this working using a 3620 OK. But am not > able > > > to get this working using the 2611 I am receiving various errors on both > > the > > > router and the switch. > > > > > > I am wondering as the config is fairly straight forward is this actually > > > possible with this router. > > > > > > Any thoughts would be appreciated > > > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Using a 2611 as an ISL router for a 2924 switch
sorry wrong question posted to! -Original Message- From: Andrew Larkins Sent: 28 March 2001 09:35 To: 'perryb'; Kevin Wigle; cisco Cc: Sean Graham Subject: RE: Using a 2611 as an ISL router for a 2924 switch what about blocking the 224.0.0.6 and 224.0.0.5 as interesting traffic. I do that by default so that updates do not bring up the link unnecessarily -Original Message- From: perryb [mailto:[EMAIL PROTECTED]] Sent: 27 March 2001 22:44 To: Kevin Wigle; cisco Cc: Sean Graham Subject: Re: Using a 2611 as an ISL router for a 2924 switch Ok, I give up...what is a 2621 then if the FE doesn't work on the 2600 series ? - Original Message - From: "Kevin Wigle" <[EMAIL PROTECTED]> To: "cisco" <[EMAIL PROTECTED]> Cc: "Sean Graham" <[EMAIL PROTECTED]> Sent: Tuesday, March 27, 2001 11:21 AM Subject: Re: Using a 2611 as an ISL router for a 2924 switch > ahhh, my favorite thread is back. > > http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600/net_m > od2/ovrnetm.htm#14116 > > says that a FE module is not supported in the 2600 series. > > It doesn't say it won't work but it does says it's not supported. If you > try to configure > > That's why the 2620's are quoted - they have 10/100 ports as part of their > base config. > > But you could be mislead by: > > http://www.cisco.com/warp/public/cc/pd/rt/2600/prodlit/2636m_ds.htm > > But, if you read the doc there is a table that says that none of the FE > modules are avail for the 2600 series. > > Also, if you go here: > > http://www.cisco.com/pcgi-bin/finder/msbsearch.pl > > and use "Search#2" and search on NM-1FE-TX the results show the module and > report and say that it is not available for the 2600 series. But it is ok > with 3600 series routers. > > Take a look at http://www.cisco.com/go/module for all your questions on > 2600/3600 routers. > > > Yeah, we've had this discussion before. > > If a reseller sold you this module expressly for the 2611, return it. If > they sold it to you for a 3600 and you decided to try it in the 2611 - well, > you got the results that CCO predicts. > > Kevin Wigle > > > > "Sean Graham" <[EMAIL PROTECTED]> wrote in message > 99qqjt$3me$[EMAIL PROTECTED]">news:99qqjt$3me$[EMAIL PROTECTED]... > > The first question I have..is the above possible with a 2611 router with a > > Fast Ethernet module install, with 48MB DRAM and IOS 12.1. It also has 2 > > Wic-1T serial cards. > > > > The Cisco web site has configuration examples based on 2620's but doesn't > > mention the 2611. I have had this working using a 3620 OK. But am not able > > to get this working using the 2611 I am receiving various errors on both > the > > router and the switch. > > > > I am wondering as the config is fairly straight forward is this actually > > possible with this router. > > > > Any thoughts would be appreciated > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Using a 2611 as an ISL router for a 2924 switch
what about blocking the 224.0.0.6 and 224.0.0.5 as interesting traffic. I do that by default so that updates do not bring up the link unnecessarily -Original Message- From: perryb [mailto:[EMAIL PROTECTED]] Sent: 27 March 2001 22:44 To: Kevin Wigle; cisco Cc: Sean Graham Subject: Re: Using a 2611 as an ISL router for a 2924 switch Ok, I give up...what is a 2621 then if the FE doesn't work on the 2600 series ? - Original Message - From: "Kevin Wigle" <[EMAIL PROTECTED]> To: "cisco" <[EMAIL PROTECTED]> Cc: "Sean Graham" <[EMAIL PROTECTED]> Sent: Tuesday, March 27, 2001 11:21 AM Subject: Re: Using a 2611 as an ISL router for a 2924 switch > ahhh, my favorite thread is back. > > http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600/net_m > od2/ovrnetm.htm#14116 > > says that a FE module is not supported in the 2600 series. > > It doesn't say it won't work but it does says it's not supported. If you > try to configure > > That's why the 2620's are quoted - they have 10/100 ports as part of their > base config. > > But you could be mislead by: > > http://www.cisco.com/warp/public/cc/pd/rt/2600/prodlit/2636m_ds.htm > > But, if you read the doc there is a table that says that none of the FE > modules are avail for the 2600 series. > > Also, if you go here: > > http://www.cisco.com/pcgi-bin/finder/msbsearch.pl > > and use "Search#2" and search on NM-1FE-TX the results show the module and > report and say that it is not available for the 2600 series. But it is ok > with 3600 series routers. > > Take a look at http://www.cisco.com/go/module for all your questions on > 2600/3600 routers. > > > Yeah, we've had this discussion before. > > If a reseller sold you this module expressly for the 2611, return it. If > they sold it to you for a 3600 and you decided to try it in the 2611 - well, > you got the results that CCO predicts. > > Kevin Wigle > > > > "Sean Graham" <[EMAIL PROTECTED]> wrote in message > 99qqjt$3me$[EMAIL PROTECTED]">news:99qqjt$3me$[EMAIL PROTECTED]... > > The first question I have..is the above possible with a 2611 router with a > > Fast Ethernet module install, with 48MB DRAM and IOS 12.1. It also has 2 > > Wic-1T serial cards. > > > > The Cisco web site has configuration examples based on 2620's but doesn't > > mention the 2611. I have had this working using a 3620 OK. But am not able > > to get this working using the 2611 I am receiving various errors on both > the > > router and the switch. > > > > I am wondering as the config is fairly straight forward is this actually > > possible with this router. > > > > Any thoughts would be appreciated > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]