Re: [Cooker] no DMA in linux-2.6.0-0.test9.5mdk
Ok, you're using a VIA82CXXX IDE chipset. I've set CONFIG_BLK_DEV_VIA82CXXX=m in test9.5mdk, but, as Andrey pointed out, ide chipsets won't even load in current 2.6 state. I do not remember having said that :) I said that modular IDE is known to not work - but the only proof of that statement I have seen is post-halloween document. But I readily admit it is true. It is not an IDE job to actually load chipset drivers - it is a job of PCI hotplug. But - we get chicken and egg problem here. You have apparently no way to dynamically load IDE drivers at the kernel probes for disks. Nor do you have any way to even STATICALLY load them out of initrd because initrd is initialized too late. Ideally we want to skip IDE init until initram has been inited and load correct driver after that. I appreciate if someone could get a look. Olivier, thank you for config comparison, it is very useful, I will send a detailed comment later.
Re: [Cooker] no DMA in linux-2.6.0-0.test9.5mdk
On Wed, 12 Nov 2003 10:27:02 +0300 Andrey Borzenkov [EMAIL PROTECTED] wrote: I do not remember having said that :) I said that modular IDE is known to not work - but the only proof of that statement I have seen is post-halloween document. I've read it on lklm in posts from Andrew Morton IIRC, I'll check it and give a more detailed answer at lunch. Regards. PS: bootsplash will be in my next 2.6 release :) -- Olivier Blin
[Cooker] idea for MDK 10: use all iso images for installing
Hi! I got an idea for MDK 10: Would it not be nice if you could do network and hd installs from the iso images? Currently this cannot be done, as the installer code only does this for the first iso image. But it handles the iso format ok, so probably it is only a matter of loopback mounting the other images (if found). best regards Keld
[Cooker] Corrected mdk 9.2 iso images, where are they?
Hi! I don't know what happened about the availabliltu of MDK 9.2 iso images, corrected for the LG problem. Were they ever produced? Do somebody have a URL to them? Or is it just too hard to create iso images out of the rpm tree? I tried it once and had problems with the iso images not being bootable. Best regards keld
Re: [Cooker] Re: [Contrib-Rpm] gdesklets-0.24.1-1mdk
Am Dienstag, 11. November 2003, 09:37:26 Uhr MET, schrieb Curtis Hildebrand: Shouldn't this be gdesklets.gnomedesktop.org? The sourceforge site has version 0.13 as the latest. Right, next time. Thanks, Götz -- What difference does it make to the dead, the orphans and the homeless, whether the mad destruction is wrought under the name of totalitarianism or the holy name of liberty or democracy? Mahatma Gandhi (1869 - 1948), Non-Violence in Peace and War
Re: [Cooker] gtk2 file selector
Am Dienstag, 11. November 2003, 18:43:07 Uhr MET, schrieb Bellegarde Cédric: So, no gnome 2.6 in mandrake 10.0 :-/ maybee, we should use this patch, test it in cooker and put it in 10.0 if stable. http://members1.chello.nl/~h.lai/gtkenhancements/ I've already tried that one, it made all gtk+2 apps crash :-( This was discussed on the list a few months ago, just search the archives. -- What difference does it make to the dead, the orphans and the homeless, whether the mad destruction is wrought under the name of totalitarianism or the holy name of liberty or democracy? Mahatma Gandhi (1869 - 1948), Non-Violence in Peace and War
Re: [Cooker] no DMA in linux-2.6.0-0.test9.5mdk
I do not remember having said that :) I said that modular IDE is known to not work - but the only proof of that statement I have seen is post-halloween document. I've read it on lklm in posts from Andrew Morton IIRC, I'll check it and give a more detailed answer at lunch. ok, I would bei interested. I still like the idea of delayed initialization and loading IDE out of initrd. Regards. PS: bootsplash will be in my next 2.6 release :) Could you make your patches available separately - at least, as long, as it is not in CVS? I use standard kernel but I'd like to test it.
Re: [Cooker] no DMA in linux-2.6.0-0.test9.5mdk
On Wed, 12 Nov 2003 11:19:03 +0300 Andrey Borzenkov [EMAIL PROTECTED] wrote: I've read it on lklm in posts from Andrew Morton IIRC, I'll check it and give a more detailed answer at lunch. ok, I would bei interested. I still like the idea of delayed initialization and loading IDE out of initrd. I've sent another reply to this, I couldn't wait for lunch ;) PS: bootsplash will be in my next 2.6 release :) Could you make your patches available separately - at least, as long, as it is not in CVS? I use standard kernel but I'd like to test it. Well, Stefan from Suse did it some days ago, he made it available here : ftp://ftp.suse.com/pub/people/stepan/bootsplash/kernel/ I have to make sure frame buffer is working before applying this patch. Any hint to test vesafb ? Do I need to pass video=vesafb ? -- Olivier Blin
Re: [Cooker] no DMA in linux-2.6.0-0.test9.5mdk
On Wed, 12 Nov 2003 10:27:02 +0300 Andrey Borzenkov [EMAIL PROTECTED] wrote: Ok, you're using a VIA82CXXX IDE chipset. I've set CONFIG_BLK_DEV_VIA82CXXX=m in test9.5mdk, but, as Andrey pointed out, ide chipsets won't even load in current 2.6 state. I do not remember having said that :) I said that modular IDE is known to not work - but the only proof of that statement I have seen is post-halloween document. Oups, it wasn't Andrew as I said but Alan Cox. It's quite old, but seems still true. Acutally, it's ide-proc that doesn't compile. A patch has been sent, but Alan waits the IDE code to be stable enough. (as you can read on LKML, Ali support looks really buggy ...) More details can be found here : http://marc.theaimsgroup.com/?l=linux-kernelm=103281667726673w=2 http://www.ussg.iu.edu/hypermail/linux/kernel/0306.0/0003.html But this problem can be avoided if we keep IDE support built-in (CONFIG_IDE=y, CONFIG_BLK_DEV_IDE=y). So general IDE module won't load, but we can try to load IDE chipset modules. But I readily admit it is true. It is not an IDE job to actually load chipset drivers - it is a job of PCI hotplug. But - we get chicken and egg problem here. You have apparently no way to dynamically load IDE drivers at the kernel probes for disks. Nor do you have any way to even STATICALLY load them out of initrd because initrd is initialized too late. Ideally we want to skip IDE init until initram has been inited and load correct driver after that. I appreciate if someone could get a look. Well, I will have a look, but I can't promise you anything, I've not read much kernel code for now. Olivier, thank you for config comparison, it is very useful, I will send a detailed comment later. You're welcome, it took me five minutes :) Can we assume that the module size is roughly the same size as if it was built-in ? I'll try to build some kernels to have a preview of the minimal size we can get. I can provide you the kernel config files from Fedora, made by Arjan van de Ven, his kernel is only 1.2 MiB IIRC. I've to work on kernel-2.6-source package too, I don't really know how I'll do it, perhaps a main kernel-2.6-source package with additionnals kernel-2.6-source-flavor binary packages that conflicts between them. Thanks for your time Andrey. -- Olivier Blin
Re: [Cooker] kdevelop qt docs
On Tuesday 11 November 2003 19:33, [EMAIL PROTECTED] wrote:
the --with-qtdoc-dir is hard coded to %_docdir/qt-3.2.1/html in the spec
file, which of course will be broken at each new qt version (just like it
is now).
QTVER=`rpmquery --qf %\{VERSION\} libqt3-devel`
QTDOCDIR=%_defaultdocdir/qt-$QTVER/doc/html
--with-qtdoc-dir=$QTDOCDIR
I think that kind of thing would be better.
-o-
kk1
thanks for your patch.
It will integrate into new kdevelop.
Regards.
Re: [Cooker] More kde conflicts
On Sunday 09 November 2003 15:07, [EMAIL PROTECTED] wrote: file /usr/bin/umbrello from install of kdesdk-3.1.93-3mdk conflicts with file from package umbrello-1.1.1-3mdk (kdesdk should probably provide/obsolete umbrello?) Fixed. I will remove it from contrib A lot of these occur if using 'urpmi --auto-select', there should be conflicts in kdepim-common for kdenetwork-common 3.1.93 etc. file /usr/bin/kgpgcertmanager from install of kdepim-common-3.1.93-6mdk conflicts with file from package kdenetwork-common-3.1.3-37mdk file /usr/lib/libkdenetwork.la from install of libkdepim2-common-3.1.93-6mdk conflicts with file from package libkdenetwork2-common-3.1.3-37mdk file /usr/lib/libkdenetwork.so.2 from install of libkdepim2-common-3.1.93-6mdk conflicts with file from package libkdenetwork2-common-3.1.3-37mdk file /usr/lib/libmimelib.la from install of libkdepim2-common-3.1.93-6mdk conflicts with file from package libkdenetwork2-common-3.1.3-37mdk file /usr/lib/libmimelib.so.1.0.1 from install of libkdepim2-common-3.1.93-6mdk conflicts with file from package libkdenetwork2-common-3.1.3-37mdk Known bugs, I will try to fix it. (I have now done 'rpm -Uvh /var/cache/urpmi/rpms/*.rpm' on this cooker box, but we have another which will probably show the problems ...). Then, I also get this: file /usr/share/mimelnk/text/x-fortran.desktop from install of kdevelop-3.0.0-0.alpha7.6mdk conflicts with file from package mandrake-mime-0.4-5mdk file /usr/share/mimelnk/text/x-pascal.desktop conflicts between attempted installs of kdevelop-3.0.0-0.alpha7.6mdk and kdelibs-common-3.1.93-11mdk I fixed it into CVS, and fixed it into kdevelop package (maybe there is a newer pacakge, our mirror is a bit behind) Regards, Buchan
Re: [Cooker] Corrected mdk 9.2 iso images, where are they?
I don't know what happened about the availabliltu of MDK 9.2 iso images, corrected for the LG problem. Were they ever produced? Do somebody have a URL to them? There are unofficial iso images only. Or is it just too hard to create iso images out of the rpm tree? Not it's easy. -- Zdenek Mazanec, Contactel s.r.o. http://mandrake.contactel.cz Silver MandrakeClub Member
Re: [Cooker] Re: No more fpons
Guillaume Cottenceau [EMAIL PROTECTED] writes: Brad Felmey [EMAIL PROTECTED] writes: On Fri, 2003-11-07 at 04:08, Guillaume Cottenceau wrote: Brad Felmey [EMAIL PROTECTED] writes: What a typical macho opinion. I rather prefer the nice girls who can write good code. IIRC for GC it would be handsome guys delivering refreshments between bouts of perfect coding. :) How rumours can spread.. I just remember a post by one of your current or former workmates saying something about it. If I'm out of line just smack me around a little. :) Kind of things that are dangerous to believe when they come second-hand, especially from a male/childish set of coworkers :). Oh! After all the things we lived together! You are so rude! -- Warly
Re: [Cooker] Re: [CHRPM] gaim-0.72-2mdk
On Wed, 2003-11-12 at 08:45, Olivier Blin wrote: On Wed, 12 Nov 2003 03:49:01 +0100 Olivier Blin [EMAIL PROTECTED] wrote: gaim now segfaults at startup. The bug must caused by the TCL patch : Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 16384 (LWP 16689)] 0x40c09f10 in Tcl_UtfToUniChar () from /usr/lib/libtcl8.4.so If you're waiting for a fixed release (errm, I only disabled the TCL patch), grab it here: http://compil.mandrake.org/~blino/gaim/ You have a dependency on perl-base 5.8.2. I can't see this package anywhere except couple of cooker servers.
Re: [Cooker] I noticed that Fedora includes dvdrtools
Gary L. Greene [EMAIL PROTECTED] writes: On Friday 07 November 2003 10:08 pm, John Allen wrote: As I said above, Fedora includes dvdrtools (a fork of cdrtools), should Mandrake include it instead of/as well as cdrecord. http://www.nongnu.org/dvdrtools/ Bero is the main developer of the dvdrtools package. The reason for the fork, is that cdrtools is weirdly licenced. One branch is GPL, while the other (the official branch that supports DVD writing support) is propreitary and closed, yet includes patches from the GPL branch. If MDK is truely aiming at having only open tools, then you should include this instead of cdrtools. This eliminates a potentially grey solution. dvdrtools is based on a old version of the DVD patch (which I am maintaining) which is actually included into mandrake cdrecord in a newer version. -- Warly
Re: [Cooker] no DMA in linux-2.6.0-0.test9.5mdk
A patch has been sent, but Alan waits the IDE code to be stable enough. he retired from active work for a year now so it is unlikely it is going to be fixed (by him) any time soon. But this problem can be avoided if we keep IDE support built-in (CONFIG_IDE=y, CONFIG_BLK_DEV_IDE=y). So general IDE module won't load, but we can try to load IDE chipset modules. we are likely to have early initialization problem then. I do not know if it really possible to change chipset driver after it has already started (even the most generic one). The same for FB support :( [...] Can we assume that the module size is roughly the same size as if it was built-in ? probably. we get the same exported symbols (that are added to main kernel) and the same code. modpost adds some aliases so actually it will be smaller builtin. I can provide you the kernel config files from Fedora, made by Arjan van de Ven, his kernel is only 1.2 MiB IIRC. I would be really interested to see how Arjan packages kernel source. I've to work on kernel-2.6-source package too, I don't really know how I'll do it, perhaps a main kernel-2.6-source package with additionnals kernel-2.6-source-flavor binary packages that conflicts between them. I'm still thinking about it. Vanilla kernel build requires at least ($src refers to source kernel directory and $build to uidl kernel directory, They can differe, works just fine. Third directory $module is external module build directory) - $build/scripts/* be present. They are the same for all flavours - $build/vmlinux be present - it writes into $builld/.tmp_versions during build modversions adds - it requires *all* $build/**/module.o files - it writes in $build/.tmp_versions for new modules - it expects *all* modules be in $build/.tmp_versions. modpost is run on that list - moreover, it also requires all $build/**/*.ko files be present! - it leaves reference to $module under $build/.tmp_versions which means, it will attempt to access it when you build different module! all in all it means that - you must be root or $build/.tmp_versions must be all-writable - you actually have to ship large part of binary modules; and it is possible that due to make rules you even have to ship all intermediate *.o files :( I do not see how it is possible to cleanly compile external module in 2.6. It is completely screwed up.
Re: [Cooker] Umbrello not in menu's
On Sunday 09 November 2003 01:10, Crispin Boylan wrote: Hi with the new kdesdk package umbrello has been added into the main kde packages, but there is no menu entry for it - can this be fixed please? Cheers cris. Fixed in new kdesdk package Regards
Re: [Cooker] Bayesian filtering still broken in SpamAssassin
On Fri, 07 Nov 2003 12:24:49 -0500, Levi Ramsey wrote: Possibly useful pontificating: perhaps some type of extension to rpm whereby a script can be specified to be run only if upgrading from a given version/range of versions should be included? It can't be done because a package should NEVER touch user data (and baysian database is stored in $HOME ...) -- Frederic Crozat MandrakeSoft
Re: [Cooker] Trying to find packages in cooker.
On Sun, 09 Nov 2003 01:17:48 -0500, Tom and Esther Ward wrote: Hello, list. I'm new to this list, and I am interested in helping debug, test, and work with the cooker release of Mandrake. However, I'm having problems finding a couple of packages that I absolutely require in order to work with Linux. I have a visual problem seeing the screen, but in Gnome 2.4 there is the atk libraries, gnopernicus screen reader, festival tts, gnome-mag magnifier, as well as other Gnome accessibility packages. type : urpmi gnopernicus then, log under gnome, go to Configuration/GNOME/Accessibility/AT Startup and choose what you want to be started when at login. -- Frederic Crozat MandrakeSoft
Re: [Cooker] gtk2 file selector
On Tue, 11 Nov 2003 18:43:07 +0100, Bellegarde Cédric wrote: So, no gnome 2.6 in mandrake 10.0 :-/ maybee, we should use this patch, test it in cooker and put it in 10.0 if stable. http://members1.chello.nl/~h.lai/gtkenhancements/ And I'll kill anybody trying to put this (or anything similar) into our GTK+ package (and I think I already warn people before).. :) -- Frederic Crozat MandrakeSoft
Re: [Cooker] Re: [CHRPM] gaim-0.72-2mdk
On Wed, 12 Nov 2003 15:12:39 +0530 Jaimon Jose [EMAIL PROTECTED] wrote: If you're waiting for a fixed release (errm, I only disabled the TCL patch), grab it here: http://compil.mandrake.org/~blino/gaim/ You have a dependency on perl-base 5.8.2. I can't see this package anywhere except couple of cooker servers. Well, this package is entended for cooker, what's wrong ? Wait your mirror to catch up the new perl-base (it was uploaded yesterday). Regards -- Olivier Blin
Re: [Cooker] Re: [CHRPM] gaim-0.72-2mdk
On Wed, 12 Nov 2003 03:49:01 +0100 Olivier Blin [EMAIL PROTECTED] wrote: gaim now segfaults at startup. The bug must caused by the TCL patch : All the patch does is overcome the tcl-8.3x version check to allow tcl to be enabled when tcl-8.4x is installed. This should not be done. Current gaim code Only supports tcl-8.3x and will not work with tcl-8.4x. That is why the version check was included in the first place. Charles -- The vast majority of successful major crimes against property are perpetrated by individuals abusing positions of trust. -- Lawrence Dalzell - Mandrake Linux 10.0 on PurpleDragon Kernel-2.4.22-21.tmb.2mdkenterprise http://www.eslrahc.com - pgp0.pgp Description: PGP signature
[Cooker] u2fs?
Hi. This is a silly unrelated question..., perhaps... How do I mount FreeBSD UFS2 partitions under Mandrake? Impossible mission?
[Cooker] [Bug 2851] [kernel] lircd does not create /dev/lirc/0
http://qa.mandrakesoft.com/show_bug.cgi?id=2851 [EMAIL PROTECTED] changed: What|Removed |Added Status|RESOLVED|REOPENED Resolution|FIXED | --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 12:57 --- This bug is still valid. [EMAIL PROTECTED] newlook]# rpm -q devfsd devfsd-1.3.25-32mdk [EMAIL PROTECTED] newlook]# uname -r 2.4.22-18mdk I changed commented out the DEVICE=/dev/lirc line in /etc/sysconfig/lircd and uncommented the DEVICE=/dev/lirc/0. I then restarted lircd with the following results: Stopping Linux Infrared Remote Control mouse daemon:[ OK ] Stopping Linux Infrared Remote Control daemon: [ OK ] Starting Linux Infrared Remote Control daemon: [ OK ] Starting Linux Infrared Remote Control mouse daemon:[ OK ] [EMAIL PROTECTED] newlook]# tail /var/log/syslog Oct 25 18:50:54 i216-191 kernel: lirc_dev: lirc_register_plugin:sample_rate: 10 Oct 25 18:50:54 i216-191 kernel: _devfs_append_entry(0): dir: lirc is not a directory Oct 25 18:50:54 i216-191 kernel: devfs_register(lirc/0): could not append to parent, err: -20 Oct 25 18:50:54 i216-191 lircd 0.6.6[12840]: lircd(any) ready Oct 25 18:50:54 i216-191 lircd: lircd startup succeeded Oct 25 18:50:54 i216-191 lircd 0.6.6[12840]: accepted new client on /tmp/.lircd Oct 25 18:50:54 i216-191 lircd 0.6.6[12840]: could not open /dev/lirc/0 Oct 25 18:50:54 i216-191 lircd 0.6.6[12840]: default_init(): Not a directory Oct 25 18:50:54 i216-191 lircd 0.6.6[12840]: caught signal Oct 25 18:50:54 i216-191 lircmd: lircmd startup succeeded [EMAIL PROTECTED] newlook]# ls /dev/lirc* -l crw-r--r--1 root root 61, 0 Oct 25 15:54 /dev/lirc srw-rw-rw-1 root root0 Oct 25 15:54 /dev/lircd= prw-r--r--1 root root0 Oct 25 15:54 /dev/lircm| --- Additional Comments From [EMAIL PROTECTED] 2003-11-12 11:25 --- [EMAIL PROTECTED] sysconfig]# rpm -q devfsd devfsd-1.3.25-32mdk [EMAIL PROTECTED] sysconfig]# uname -r 2.4.22-24mdk [EMAIL PROTECTED] sysconfig]# rpm -qa|grep lirc liblirc0-0.6.6-3mdk lirc-remotes-0.6.6-1mdk lirc-0.6.6-3mdk Nov 12 18:19:03 i115-184 kernel: lirc_dev: IR Remote Control driver registered, at major 61 Nov 12 18:19:03 i115-184 kernel: lirc_i2c: chip found @ 0x4b (PV951 IR) Nov 12 18:19:03 i115-184 kernel: tuner: type already set (1) Nov 12 18:19:03 i115-184 kernel: lirc_dev: lirc_register_plugin:sample_rate: 10 Nov 12 18:19:03 i115-184 kernel: _devfs_append_entry(0): dir: lirc is not a directory Nov 12 18:19:03 i115-184 kernel: devfs_register(lirc/0): could not append to parent, err: -20 Nov 12 18:19:03 i115-184 lircd 0.6.6[11488]: lircd(any) ready Nov 12 18:19:03 i115-184 lircd: lircd startup succeeded Nov 12 18:19:03 i115-184 lircd 0.6.6[11488]: accepted new client on /tmp/.lircd Nov 12 18:19:03 i115-184 lircd 0.6.6[11488]: could not open /dev/lirc/0 Nov 12 18:19:03 i115-184 lircd 0.6.6[11488]: default_init(): Not a directory Nov 12 18:19:03 i115-184 lircd 0.6.6[11488]: caught signal Nov 12 18:19:03 i115-184 lircmd: lircmd startup succeeded [EMAIL PROTECTED] sysconfig]# ls -l /dev/lirc* -l crw-r--r--1 root root 61, 0 Nov 12 15:26 /dev/lirc srw-rw-rw-1 root root0 Nov 12 15:26 /dev/lircd= prw-r--r--1 root root0 Nov 12 15:26 /dev/lircm| As previously, the fix is to change the device used in /etc/sysconfig/lircd to the non-devfs device. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: REOPENED creation_date: description: With the latest cooker update from 6th of March, lircd does not create /dev/lirc/0. I am taking a stab in the dark and assuming that because I run a system with devfs that the module is not creating the devfs entry. Changing /etc/sysconfig/lircd from: (this results in lircmd and crew not being able to communicate with the kernel space portion of this and hence all the problems that arrise from that) # The device node that communicates with the IR device. # with devfs enabled DEVICE=/dev/lirc/0 # without devfs #DEVICE=/dev/lirc To: # The device node that communicates with the IR device. # with devfs enabled #DEVICE=/dev/lirc/0 # without devfs DEVICE=/dev/lirc Fixes the problem and all other remaining mdk packages work as expected (tested with irw and xawtv). I've banged my head about this one for a month or so now since getting my new PV951 tuner card and just decided to have another dig at it. Hopefully this will get fixed for the final release.
Re: [Cooker]
[EMAIL PROTECTED] writes: # detectloader Can't call method L without a package or object reference at /usr/sbin/detectloader line 127. line 127 is: $return = readlink($return) if -L $return; broken with new perl? well it was broken, it was doing: - $return it is now doing: - $return-L anyway, this code seems to be broken, - $return where $return is an absolute file always returned -0 i remove that line... and upload a new bootloader-utils
[Cooker] [Bug 2851] [kernel] lircd does not create /dev/lirc/0
http://qa.mandrakesoft.com/show_bug.cgi?id=2851 --- Additional Comments From [EMAIL PROTECTED] 2003-11-12 12:19 --- hmmm, have you tried to REMOVE /dev/lirc* (and in /lib/dev-state) .. I think you had old node around in /dev/lirc which are causing the problem. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: REOPENED creation_date: description: With the latest cooker update from 6th of March, lircd does not create /dev/lirc/0. I am taking a stab in the dark and assuming that because I run a system with devfs that the module is not creating the devfs entry. Changing /etc/sysconfig/lircd from: (this results in lircmd and crew not being able to communicate with the kernel space portion of this and hence all the problems that arrise from that) # The device node that communicates with the IR device. # with devfs enabled DEVICE=/dev/lirc/0 # without devfs #DEVICE=/dev/lirc To: # The device node that communicates with the IR device. # with devfs enabled #DEVICE=/dev/lirc/0 # without devfs DEVICE=/dev/lirc Fixes the problem and all other remaining mdk packages work as expected (tested with irw and xawtv). I've banged my head about this one for a month or so now since getting my new PV951 tuner card and just decided to have another dig at it. Hopefully this will get fixed for the final release.
Re: [Cooker] no DMA in linux-2.6.0-0.test9.5mdk
Quoting Olivier Blin [EMAIL PROTECTED]: On Tue, 11 Nov 2003 22:56:51 -0500 Scott Chevalley [EMAIL PROTECTED] wrote: Yes, I need please the output of lscpi and lspcidrake (to give me the exact name of your IDE chipset). Thanks. here ya go. Ok, you're using a VIA82CXXX IDE chipset. I've set CONFIG_BLK_DEV_VIA82CXXX=m in test9.5mdk, but, as Andrey pointed out, ide chipsets won't even load in current 2.6 state. I'll built-in ide chipsets back in next release. BTW, I'd like to know if the ide module is correctly detected by mkinitrd. Can you please try the following (as root) so I can check which modules are detected and added in the /lib of initrd ? cp /boot/initrd-2.6.0-0.test9.5mdk.img initrd-2.6-test9.5mdk.img.gz gunzip initrd-2.6-test9.5mdk.img.gz mkdir initrd-2.6-test9.5mdk mount initrd-2.6-test9.5mdk.img initrd-2.6-test9.5mdk -o loop ls initrd-2.6-test9.5mdk/lib umount initrd-2.6-test9.5mdk Thanks -- Olivier Blin it only shows reiserfs.ko in there. ... [EMAIL PROTECTED] scott]# ls initrd-2.6.0-0.test9.5mdk/l lib linuxrc loopfs [EMAIL PROTECTED] scott]# ls initrd-2.6.0-0.test9.5mdk/lib reiserfs.ko
Re: [Cooker] u2fs?
On Wed, 12 Nov 2003 13:08:39 +0100 Oden Eriksson [EMAIL PROTECTED] wrote: How do I mount FreeBSD UFS2 partitions under Mandrake? I used: mount -t ufs -o ufstype=44bsd /dev/hda8 /mnt Hope this helps. -- Marcel Pol
Re: [Cooker] u2fs?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi. This is a silly unrelated question..., perhaps... How do I mount FreeBSD UFS2 partitions under Mandrake? Impossible mission? Try this: mount /dev/hdXY /mnt/foo -t ufs -o ufstype=44bsd - -- Mark Watts Senior Systems Engineer QinetiQ TIM St Andrews Road, Malvern GPG Public Key ID: 455420ED -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE/skpuBn4EFUVUIO0RAmU/AJ4wCgtrjYIxMPtM9y86Jmi7yylhZwCg/YHz ukuHMOpnV7hhrmDw8j2pCn0= =i2DX -END PGP SIGNATURE-
[Cooker] [Bug 2851] [kernel] lircd does not create /dev/lirc/0
http://qa.mandrakesoft.com/show_bug.cgi?id=2851 [EMAIL PROTECTED] changed: What|Removed |Added Status|REOPENED|RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-11-12 12:56 --- Suprisingly, that did the trick. I wasn't aware that nodes stuck around with devfs. From my previous experiences in the 2.3.x days writing the devfs patches for the nVidia driver, devfs created _everything_ on the fly as required. I guess this has changed. Sorry to carry this fault on longer than needed. All is working now. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: With the latest cooker update from 6th of March, lircd does not create /dev/lirc/0. I am taking a stab in the dark and assuming that because I run a system with devfs that the module is not creating the devfs entry. Changing /etc/sysconfig/lircd from: (this results in lircmd and crew not being able to communicate with the kernel space portion of this and hence all the problems that arrise from that) # The device node that communicates with the IR device. # with devfs enabled DEVICE=/dev/lirc/0 # without devfs #DEVICE=/dev/lirc To: # The device node that communicates with the IR device. # with devfs enabled #DEVICE=/dev/lirc/0 # without devfs DEVICE=/dev/lirc Fixes the problem and all other remaining mdk packages work as expected (tested with irw and xawtv). I've banged my head about this one for a month or so now since getting my new PV951 tuner card and just decided to have another dig at it. Hopefully this will get fixed for the final release.
[Cooker] xmms-1.2.7-26mdk
Hi.
Here's background info:
I'm very picky when it comes to functionality, and I love features that some
people maybe even never heard about, or knew existed. One of these features
is the A-B button on my remote control for my Technics SL-P470 (audio cd
player). As a musician having to figure out song lyrics and train guitar
solos for the next cover song that we will play live, the A-B feature is
extremly crucial. I have asked the authors of winamp and xmms numerous times
about this feature, for at least 4(?) years, well since winamp 1.7.3... Guess
what? No responce...
The good news is that a guy named Rodrigo Martins de Matos Ventura made a
patch for xmms. I rediffed this patch for the mandrake package and it works
like a charm! This is so cool! I love it! Now I can use the PC as a training
device for learning songs and stuff! Awesome!
I guess a lot of fellows (Austin?) would appreciate this patch if they only
knew about it, and realized the benefits of it. My patches are applied to
this mail.
To learn more about it, please read this mail:
http://lists.xmms.org/pipermail/xmms-devel/2002-January/002282.html
(2002-January, duh!)
I made packages for Mandrake Linux 9.2, check here:
http://www.deserve-it.com/9.2/
Chears.
--- xmms.spec 2003-08-29 21:43:00.0 +0200
+++ xmms.spec.oden 2003-11-12 15:34:00.0 +0100
@@ -13,7 +13,7 @@
Name: xmms
Summary: The Sound player with the WinAmp GUI
Version: 1.2.7
-Release: 25mdk
+Release: 26mdk
License: GPL
Group: Sound
URL: http://www.xmms.org/
@@ -53,6 +53,10 @@
Patch50: xmms-1.2.5-3dse-11.patch.bz2
Patch51: xmms-3dse-niqueluisarace.patch.bz2
+# rediffed from this mail:
+# http://lists.xmms.org/pipermail/xmms-devel/2002-January/002282.html
+Patch60: xmms-1.2.7-AB-repeat.diff.bz2
+
Packager: Guillaume Cottenceau [EMAIL PROTECTED]
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
BuildRequires: libglib-devel libgtk+-devel libxml-devel libvorbis-devel libogg-devel
@@ -169,6 +173,9 @@
%endif
%patch51 -p1
+# rediffed from this mail:
+# http://lists.xmms.org/pipermail/xmms-devel/2002-January/002282.html
+%patch60 -p0
%build
autoconf # (gc) patched configure.in
@@ -382,6 +389,9 @@
%endif
%changelog
+* Wed Nov 12 2003 Oden Eriksson [EMAIL PROTECTED] 1.2.7-26mdk
+- added P60
+
* Fri Aug 29 2003 Pablo Saratxaga [EMAIL PROTECTED] 1.2.7-25mdk
- included new translations
@@ -798,3 +808,4 @@
* Fri Apr 09 1999 Lyle Kempler [EMAIL PROTECTED]
- initial version
+
--- xmms/main.c 2002-02-27 15:30:28.0 +0100
+++ xmms/main.c.oden 2003-11-12 15:23:36.0 +0100
@@ -56,8 +56,8 @@
SButton *mainwin_srew, *mainwin_splay, *mainwin_spause, *mainwin_sstop,
*mainwin_sfwd, *mainwin_seject, *mainwin_about;
TButton *mainwin_shuffle, *mainwin_repeat, *mainwin_eq, *mainwin_pl;
-TextBox *mainwin_info, *mainwin_rate_text, *mainwin_freq_text, *mainwin_stime_min,
- *mainwin_stime_sec;
+TextBox *mainwin_info, *mainwin_rate_text, *mainwin_freq_text, *mainwin_ab_text,
+ *mainwin_stime_min,*mainwin_stime_sec;
MenuRow *mainwin_menurow;
HSlider *mainwin_volume, *mainwin_balance, *mainwin_position, *mainwin_sposition = NULL;
MonoStereo *mainwin_monostereo;
@@ -80,6 +80,9 @@
static gchar *mainwin_title_text = NULL;
static gboolean mainwin_info_text_locked = FALSE;
+static int ab_position_a = -1;
+static int ab_position_b = -1;
+
#if 0
/* For x11r5 session management */
static gchar **restart_argv;
@@ -259,7 +262,7 @@
MAINWIN_GENERAL_STOPFADE, MAINWIN_GENERAL_BACK5SEC,
MAINWIN_GENERAL_FWD5SEC, MAINWIN_GENERAL_START, MAINWIN_GENERAL_BACK10,
MAINWIN_GENERAL_FWD10, MAINWIN_GENERAL_JTT, MAINWIN_GENERAL_JTF,
- MAINWIN_GENERAL_EXIT
+ MAINWIN_GENERAL_EXIT, MAINWIN_GENERAL_SETAB, MAINWIN_GENERAL_CLEARAB
};
void mainwin_general_menu_callback(gpointer cb_data, guint action, GtkWidget * w);
@@ -294,6 +297,9 @@
{N_(/Playback/-), NULL, NULL, 0, Separator},
{N_(/Playback/Jump to Time), controlJ, mainwin_general_menu_callback, MAINWIN_GENERAL_JTT, Item},
{N_(/Playback/Jump to File), J, mainwin_general_menu_callback, MAINWIN_GENERAL_JTF, Item},
+ {N_(/Playback/-), NULL, NULL, 0, Separator},
+{N_(/Playback/Set A-B), A, mainwin_general_menu_callback, MAINWIN_GENERAL_SETAB, Item},
+{N_(/Playback/Clear A-B), S, mainwin_general_menu_callback, MAINWIN_GENERAL_CLEARAB, Item},
{N_(/Visualization), NULL, NULL, 0, Item},
{N_(/-), NULL, NULL, 0, Separator},
{N_(/Exit), NULL, mainwin_general_menu_callback, MAINWIN_GENERAL_EXIT, Item}
@@ -1931,6 +1937,8 @@
void mainwin_play_pushed(void)
{
+if (-1!=ab_position_a)
+input_seek(ab_position_a/1000);
if (get_input_paused())
{
input_pause();
@@ -2447,7 +2455,26 @@
break;
case MAINWIN_GENERAL_EXIT:
mainwin_quit_cb();
- break;
+ break;
+case MAINWIN_GENERAL_SETAB:
+if (playlist_get_current_length() != -1)
+if (-1==ab_position_a) {
+
Re: [Cooker] u2fs?
onsdagen den 12 november 2003 15.55 skrev Marcel Pol: On Wed, 12 Nov 2003 13:08:39 +0100 Oden Eriksson [EMAIL PROTECTED] wrote: How do I mount FreeBSD UFS2 partitions under Mandrake? I used: mount -t ufs -o ufstype=44bsd /dev/hda8 /mnt Hope this helps. Nope: # mount /dev/hdb1 /mnt/hdb1 -t ufs -o ufstype=44bsd mount: wrong fs type, bad option, bad superblock on /dev/hdb1, or too many mounted file systems I only found this outdated stuff: http://www.tldp.org/HOWTO/Linux+FreeBSD-5.html The u2fs driver is from 1997... As you see I mentioned UFS2 in my original post.
Re: [Cooker] mysql-max 4.0.16 segfaults
On Wed, Nov 12, 2003 at 01:02:58AM +0100, Oden Eriksson wrote: onsdagen den 12 november 2003 00.06 skrev Luca Berra: 031112 00:03:52 mysqld started mysqld got signal 11; Weird. It's running just fine on 9.2. Would a rebuild help? nope, i tried rebuilding today mysqld works mysqld-max segfaults -- Luca Berra -- [EMAIL PROTECTED] Communication Media Services S.r.l. /\ \ / ASCII RIBBON CAMPAIGN XAGAINST HTML MAIL / \
[Cooker] [Bug 5321] [galeon] Problem managing bookmarks (drag to new folder)
http://qa.mandrakesoft.com/show_bug.cgi?id=5321 [EMAIL PROTECTED] changed: What|Removed |Added Status|RESOLVED|REOPENED Resolution|WONTFIX | --- Additional Comments From [EMAIL PROTECTED] 2003-11-12 13:06 --- DO NOT close bug you don't own !! This bug should remain opened until upstream gnome bug is fixed and backported to cooker.. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: REOPENED creation_date: description: In the bookmark editor, if you create a new folder, it is not possible to drag existing bookmark into the empty folder. The work-around is to create a new dummy bookmark in the empty folder so that it is no longer empty. After dropping existing bookmarks into the folder, the dummy bookmark can be removed.
[Cooker] [Bug 6338] [mdkkdm] /etc/sysconfig/desktop does not exist
http://qa.mandrakesoft.com/show_bug.cgi?id=6338 [EMAIL PROTECTED] changed: What|Removed |Added AssignedTo|148 |25 Status|UNCONFIRMED |RESOLVED Resolution||INVALID --- Additional Comments From [EMAIL PROTECTED] 2003-12-11 14:00 --- packaging config files is bad. config files are created by config tools when needed -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: /etc/sysconfig/desktop Does not exist and is not documented. It is possible to specify with DM to use. DISPLAYMANAGER=GDM thouse parameters are used in /etc/X11/prefdm and /etc/X11/Xsession. It will be even better if you will move /etc/sysconfig/* to separate package.
Re: [Cooker] mysql-max 4.0.16 segfaults
onsdagen den 12 november 2003 16.52 skrev Luca Berra: On Wed, Nov 12, 2003 at 01:02:58AM +0100, Oden Eriksson wrote: onsdagen den 12 november 2003 00.06 skrev Luca Berra: 031112 00:03:52 mysqld started mysqld got signal 11; Weird. It's running just fine on 9.2. Would a rebuild help? nope, i tried rebuilding today mysqld works mysqld-max segfaults Hmmm..., I'm using this in production and I'm not experiencing any problems like this. You're sure nothing's wrong at your end? To be honest I'm not using max generally, but I have briefly switched over to max but had no problems.
Re: [Cooker] no DMA in linux-2.6.0-0.test9.5mdk
On Tuesday 11 November 2003 10:18 pm, Olivier Blin wrote: On Tue, 11 Nov 2003 22:56:51 -0500 Scott Chevalley [EMAIL PROTECTED] wrote: Yes, I need please the output of lscpi and lspcidrake (to give me the exact name of your IDE chipset). Thanks. here ya go. Ok, you're using a VIA82CXXX IDE chipset. I've set CONFIG_BLK_DEV_VIA82CXXX=m in test9.5mdk, but, as Andrey pointed out, ide chipsets won't even load in current 2.6 state. I'll built-in ide chipsets back in next release. BTW, I'd like to know if the ide module is correctly detected by mkinitrd. Can you please try the following (as root) so I can check which modules are detected and added in the /lib of initrd ? cp /boot/initrd-2.6.0-0.test9.5mdk.img initrd-2.6-test9.5mdk.img.gz gunzip initrd-2.6-test9.5mdk.img.gz mkdir initrd-2.6-test9.5mdk mount initrd-2.6-test9.5mdk.img initrd-2.6-test9.5mdk -o loop ls initrd-2.6-test9.5mdk/lib umount initrd-2.6-test9.5mdk Thanks I know that my VIA82CXXX IDE chipset module was not placed in the initrd. I remade the initrd with the module using --with=via82cxxx, then I found out that ide drivers don't work well as modules So I rebuilt the kernel. :-) This is with kernel-2.6.0-0.test9.5mdk-1-1mdk. -- Bret Baptist Systems and Technical Support Specialist [EMAIL PROTECTED] Internet Exposure, Inc. http://www.iexposure.com (612)676-1946 x17 Web Development-Web Marketing-ISP Services -- Today is the tomorrow you worried about yesterday.
Re: [Cooker] u2fs?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 onsdagen den 12 november 2003 15.55 skrev Marcel Pol: On Wed, 12 Nov 2003 13:08:39 +0100 Oden Eriksson [EMAIL PROTECTED] wrote: How do I mount FreeBSD UFS2 partitions under Mandrake? I used: mount -t ufs -o ufstype=44bsd /dev/hda8 /mnt Hope this helps. Nope: # mount /dev/hdb1 /mnt/hdb1 -t ufs -o ufstype=44bsd mount: wrong fs type, bad option, bad superblock on /dev/hdb1, or too many mounted file systems I only found this outdated stuff: http://www.tldp.org/HOWTO/Linux+FreeBSD-5.html The u2fs driver is from 1997... As you see I mentioned UFS2 in my original post. 'man mount' is only giving info on ufs partitions, not ufs2. The kernel config tools are only giving the option of 'ufs', not ufs2. I'm guessing linux (at least MDK) doesn't support ufs2. Mark. - -- Mark Watts Senior Systems Engineer QinetiQ TIM St Andrews Road, Malvern GPG Public Key ID: 455420ED -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE/smDjBn4EFUVUIO0RAs+eAJwNOp8qf087RdZckPKgBX0Q2u6S7gCeOZyY rdcTa+GUNlnqQUR1nFbgT30= =UKw8 -END PGP SIGNATURE-
[Cooker] 9.1 kernel 2.4.21-0.13mdk and USB Flash Drives
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Ok so this is an older kernel... When I boot my system and plug in my usb drive, it works. When I remove it and reinsert it I get the following in /var/log/messages: Nov 12 16:28:37 mwatts kernel: hub.c: new USB device 00:1f.2-1.4, assigned address 9 Nov 12 16:28:41 mwatts /etc/hotplug/usb.agent: Setup usb-storage for USB product ed1/6680/100 Nov 12 16:28:41 mwatts /etc/hotplug/usb.agent: Module setup usb-storage for USB product ed1/6680/100 Nov 12 16:28:41 mwatts /etc/hotplug/usb/usb-storage: Load scsimon Nov 12 16:28:41 mwatts /etc/hotplug/usb/usb-storage: scsimon allready loaded Nothing else happens now - I dont get the usual scsi device detection, and I certainly don't get a /mnt/removable appear. I tried upgrading to the latest 9.1 errata kernel, but this makes the problem even worse - insmod hangs trying to load usb-storage module as part of the hotplug scripts. Aside from upgrading to 9.2, which it not a suitable option in current circumstances, is there a fix for this? Everything worked just fine in 9.0... Cheers, Mark. - -- Mark Watts Senior Systems Engineer QinetiQ TIM St Andrews Road, Malvern GPG Public Key ID: 455420ED -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE/smH0Bn4EFUVUIO0RAkSwAKCiAPAkt0NfSlerBh7IwzFEZI2XiwCfeQLX QoIZ/Wi2uTq7GUtYxNDjVrc= =lRTf -END PGP SIGNATURE-
Re: [Cooker] no DMA in linux-2.6.0-0.test9.5mdk
On Wed, 12 Nov 2003 10:26:04 -0600 Bret Baptist [EMAIL PROTECTED] wrote: I know that my VIA82CXXX IDE chipset module was not placed in the initrd. I remade the initrd with the module using --with=via82cxxx, then I found out that ide drivers don't work well as modules So I rebuilt the kernel. :-) Yes, sorry, I made a mistake. I'll build a new package, perhaps this night. I'll try to fix this module loading issue and to fix our mkinitrd script to detect IDE modules (won't be easy ...). Sorry for the mess. -- Olivier Blin
[Cooker] [Bug 5673] [kernel] SIS 746FX - lost interrupts
http://qa.mandrakesoft.com/show_bug.cgi?id=5673 --- Additional Comments From [EMAIL PROTECTED] 2003-11-12 16:56 --- I 've got the same error durin 9.2rc2 installation. I also have the same motherboard... On installing 9.1 (final) I got the same error (kernel 2.4.18 i believe...) There are any kernel patch for this? how to implement it on installation disk? -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Mainboard: ASRock K7S8X, SIS 746FX chipset, Bios 1.90 Sept, 15, 2003 I tried to boot up from 9.2rc2 CD 1. It detected my IDE-chipset as SIS 5513: SIS 962/963 MuIOL UDMA/133 Then it got problems while detecting my HDDs: hda: attached ide-disk driver hda: lost interrupt hda: lost interrupt hda: lost interrupt hda: host protected ares=J1 hda: lost interrupt hda: xxx sectors etc. (harddisk properly detected) from the first lost interrupt to the detection of my first harddisk two minutes elapsed. As it tried to detect my hdc and started again with hdc: lost interrupt I stopped the installation. Maybe a workaround for this could be to use the kernel - parameter noapic, but this would be a *workaround* only. On my current 9.1 installation with kernel 2.4.21 I also get APIC-errors in /var/log/messages even when starting with the noapic - option :-( Any help would be appreciated! Thank you!
Re: [Cooker] no DMA in linux-2.6.0-0.test9.5mdk
On Wednesday 12 November 2003 11:13 am, Olivier Blin wrote: On Wed, 12 Nov 2003 10:26:04 -0600 Bret Baptist [EMAIL PROTECTED] wrote: I know that my VIA82CXXX IDE chipset module was not placed in the initrd. I remade the initrd with the module using --with=via82cxxx, then I found out that ide drivers don't work well as modules So I rebuilt the kernel. :-) Yes, sorry, I made a mistake. I'll build a new package, perhaps this night. I'll try to fix this module loading issue and to fix our mkinitrd script to detect IDE modules (won't be easy ...). Sorry for the mess. No problems Olivier, so far it has been a great experience with 2.6test. You are doing an awesome job. Thanks a ton. -- Bret Baptist Systems and Technical Support Specialist [EMAIL PROTECTED] Internet Exposure, Inc. http://www.iexposure.com (612)676-1946 x17 Web Development-Web Marketing-ISP Services -- Today is the tomorrow you worried about yesterday.
Re: [Cooker] xmms-1.2.7-26mdk
Oden Eriksson [EMAIL PROTECTED] writes: Hi. Here's background info: I'm very picky when it comes to functionality, and I love features that some people maybe even never heard about, or knew existed. One of these features is the A-B button on my remote control for my Technics SL-P470 (audio cd player). As a musician having to figure out song lyrics and train guitar solos for the next cover song that we will play live, the A-B feature is extremly crucial. I have asked the authors of winamp and xmms numerous times about this feature, for at least 4(?) years, well since winamp 1.7.3... Guess what? No responce... The good news is that a guy named Rodrigo Martins de Matos Ventura made a patch for xmms. I rediffed this patch for the mandrake package and it works like a charm! This is so cool! I love it! Now I can use the PC as a training device for learning songs and stuff! Awesome! How does it behave when you don't have the necessary hardware? I guess it's just available through A and S keystrokes? Also, I think it should have a tooltip explaining what it is, as it's rather obscure to normal people. Would you consider adding the tooltip? I guess a lot of fellows (Austin?) would appreciate this patch if they only knew about it, and realized the benefits of it. My patches are applied to this mail. To learn more about it, please read this mail: http://lists.xmms.org/pipermail/xmms-devel/2002-January/002282.html (2002-January, duh!) XMMS staff never answered I guess? I made packages for Mandrake Linux 9.2, check here: http://www.deserve-it.com/9.2/ Chears. --- xmms/main.c 2002-02-27 15:30:28.0 +0100 +++ xmms/main.c.oden 2003-11-12 15:23:36.0 +0100 Patch is rather small, nice :). -- Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Re: [Cooker] idea for MDK 10: use all iso images for installing
Keld Jørn Simonsen [EMAIL PROTECTED] writes: Hi! I got an idea for MDK 10: Would it not be nice if you could do network and hd installs from the iso images? Olivier, any patch pending? -- Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Re: [Cooker] gtk2 file selector
I'm using this patch since the last discussion on mailing list. All my gtk/gnome apps works perfectly :) But, like i don't want to fight with fcrozat ... ;) Le mer 12/11/2003 à 08:55, Götz Waschk a écrit : Am Dienstag, 11. November 2003, 18:43:07 Uhr MET, schrieb Bellegarde Cédric: So, no gnome 2.6 in mandrake 10.0 :-/ maybee, we should use this patch, test it in cooker and put it in 10.0 if stable. http://members1.chello.nl/~h.lai/gtkenhancements/ I've already tried that one, it made all gtk+2 apps crash :-( This was discussed on the list a few months ago, just search the archives.
Re: [Cooker] idea for MDK 10: use all iso images for installing
On 12 Nov 2003 18:49:54 +0100 Guillaume Cottenceau [EMAIL PROTECTED] wrote: Keld Jørn Simonsen [EMAIL PROTECTED] writes: Hi! I got an idea for MDK 10: Would it not be nice if you could do network and hd installs from the iso images? Olivier, any patch pending? I guess it will be ready some months before next release, as well as proxy support (which is almost done, I only need to patch stage2 now). I know how to do it, I just need some time to code and test. BTW, we should use the same user agent in urpmi : User-Agent: DrakX/vivelinuxabaszindozs ;) I've lot of things pending. For now, I'm fighting with asm kernel code :) -- Olivier Blin
Re: [Cooker] idea for MDK 10: use all iso images for installing
Selon Guillaume Cottenceau [EMAIL PROTECTED]: Keld Jørn Simonsen [EMAIL PROTECTED] writes: Hi! I got an idea for MDK 10: Would it not be nice if you could do network and hd installs from the iso images? Olivier, any patch pending? -- Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/ That's stange. Whith the Mdk9.2, id did have instllad my stystem form iso stored on my hd...
Re: [Cooker] idea for MDK 10: use all iso images for installing
On Wed, 12 Nov 2003 19:47:22 +0100 [EMAIL PROTECTED] wrote: That's stange. Whith the Mdk9.2, id did have instllad my stystem form iso stored on my hd... Hum, what's strange ? It's what it's supposed to do, isn't it ? However, with current installer, you can only use the first ISO on hard disk. -- Olivier Blin
[Cooker] KDE 3.1.93-16mdk problems
The kcontrol panel has gotten worse - still hoping for the fix soon. Found another problem now - the kicker panel can't be configured - I get an error trying to find libkcm_kicker.la - It should be in the kdebase package but appears to be missing. Thx, R.Fox -- Robert Fox [EMAIL PROTECTED] Fox Consulting Services
Re: [Cooker] qt still crapped?
On Wednesday 12 November 2003 11:05 am, Austin wrote: [EMAIL PROTECTED] rpm]$ qjackctl Loading required GL library /usr/X11R6/lib/libGL.so.1.2 Warning: no locale found: /usr/share/locale/qjackctl_en_US.qm No Motif style available! [EMAIL PROTECTED] rpm]$ Austin install xfree devel -- New and improved with advanced outlook crash handler. !--input type -- -~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~- Brook Humphrey Mobile PC Medic, 420 1st, Cheney, WA 99004, 509-235-9107 http://www.webmedic.net, [EMAIL PROTECTED], [EMAIL PROTECTED] Holiness unto the Lord -~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-
Re: [Cooker] no DMA in linux-2.6.0-0.test9.5mdk
On Wed, 12 Nov 2003 10:26:04 -0600 Bret Baptist [EMAIL PROTECTED] wrote: I know that my VIA82CXXX IDE chipset module was not placed in the initrd. I remade the initrd with the module using --with=via82cxxx, then I found out that ide drivers don't work well as modules So I rebuilt the kernel. :-) Yes, sorry, I made a mistake. I'll build a new package, perhaps this night. I'll try to fix this module loading issue and to fix our mkinitrd script to detect IDE modules (won't be easy ...). Sorry for the mess. very short note (will come back later with longer one :) ) wanna include some 3rdparty stuff ?-) i'm trying to ?port? the mdk 3rdparty modules to 2.6 and i almost, partly got it, but ... 1.) grrr, i've no idea how to fix one issue make clean doesn't work after make mrproper( probably distclean too) 2.) i can not find external drivers that work with 2.6 here is what i got to compile (in one or another way, mostly troubled by prism2, ov511 also needs fixing :() best, svetljo PS 1) atmel-ng is berlios driver with intersil support 2.) lirc probably needs some tweaking/fixing too # # Unofficial 3rd party kernel additions # CONFIG_ACX100=m CONFIG_ATMEL_NG=m CONFIG_HOSTAP=m CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_PLX=m CONFIG_HOSTAP_PCI=m CONFIG_HOSTAP_CS=m # # Linux InfraRed Controller # CONFIG_LIRC=y CONFIG_LIRC_SUPPORT=y CONFIG_LIRC_MAX_DEV=2 CONFIG_LIRC_GPIO=m # CONFIG_LIRC_BT829 is not set CONFIG_LIRC_IT87=m CONFIG_LIRC_ATIUSB=m CONFIG_LIRC_SERIAL=m CONFIG_LIRC_HOMEBREW=y # CONFIG_LIRC_SERIAL_ANIMAX is not set # CONFIG_LIRC_SERIAL_IRDEO is not set # CONFIG_LIRC_SERIAL_IRDEO_REMOTE is not set # CONFIG_LIRC_SERIAL_TRANSMITTER is not set # CONFIG_LIRC_SERIAL_IGOR is not set CONFIG_LIRC_SERIAL_COM1=y # CONFIG_LIRC_SERIAL_COM2 is not set # CONFIG_LIRC_SERIAL_COM3 is not set # CONFIG_LIRC_SERIAL_COM4 is not set # CONFIG_LIRC_SERIAL_OTHER is not set CONFIG_LIRC_PORT_SERIAL=0x3f8 CONFIG_LIRC_IRQ_SERIAL=0x4 CONFIG_LIRC_SIR=m CONFIG_LIRC_SIR_IRDA=m CONFIG_LIRC_SIR_TEKRAM=m CONFIG_LIRC_SIR_ACTISYS_ACT200L=m CONFIG_LIRC_SIR_COM1=y # CONFIG_LIRC_SIR_COM2 is not set # CONFIG_LIRC_SIR_COM3 is not set # CONFIG_LIRC_SIR_COM4 is not set # CONFIG_LIRC_SIR_OTHER is not set CONFIG_LIRC_PORT_SIR=0x3f8 CONFIG_LIRC_IRQ_SIR=0x4 CONFIG_LUFS=m CONFIG_PRISM54=m CONFIG_QC_USB=m # # Prism2.5 wireless support # CONFIG_PRISM25=m CONFIG_P80211=m CONFIG_PRISM2_PLX=m CONFIG_PRISM2_PCI=m # CONFIG_PRISM2_USB is not set CONFIG_PRISM2_CS=m # CONFIG_OV511 is not set -- NEU FÜR ALLE - GMX MediaCenter - für Fotos, Musik, Dateien... Fotoalbum, File Sharing, MMS, Multimedia-Gruß, GMX FotoService Jetzt kostenlos anmelden unter http://www.gmx.net +++ GMX - die erste Adresse für Mail, Message, More! +++ MB02-3rdparty.patch Description: Binary data
[Cooker] [Bug 5321] [galeon] Problem managing bookmarks (drag to new folder)
http://qa.mandrakesoft.com/show_bug.cgi?id=5321 --- Additional Comments From [EMAIL PROTECTED] 2003-11-12 17:24 --- Sorry, won't do it again. See bug 190, bug 2823, bug 6011 and numerous others for closing bugs that are reported upstream, or where contributors are told to report upstream. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: REOPENED creation_date: description: In the bookmark editor, if you create a new folder, it is not possible to drag existing bookmark into the empty folder. The work-around is to create a new dummy bookmark in the empty folder so that it is no longer empty. After dropping existing bookmarks into the folder, the dummy bookmark can be removed.
[Cooker] No KDE app menu entries in GNOME ?
I've just done a new installation from a Monday (Nov. 10) refresh of cooker, and I'm finding that the launcher in GNOME no longer contains any entries for KDE apps, such as Kate, KCalc, etc. I'm sure these were there in the 9.2 RCs, since I always add them to my panel. Have these disappeared by design, or is this something that needs to be corrected ?
Re: [Cooker] 2.6test9.5 problems
On Wed, 12 Nov 2003 23:00:26 +1300 Bernard Varaine [EMAIL PROTECTED] wrote: 2.6 test9 boot in console mode. errors on loopback device (see mes2.6 attached) I can't see anything wrong with loopback in your syslog, can you please quote the loopback errors ? but freeze completely when trying to run X (XFree log attached) It's quite hard to debug since there's no errors in your XFree log ... (only some apm warnings) Do you use XFree drivers or ATI proprietary drivers? If you use the last ones, try to fall back to XFree drivers. Regards -- Olivier Blin
[Cooker] spamassassin broken
two errors from spamassissin probably related to perl service spamassassin start Starting spamd: execvp: No such file or directory [FAILED] sa-learn --spam --showdots --dir /home/salane/.Mail/spam-id/cur/ bash: /usr//bin/sa-learn: /usr/bin/perl5.8.1: bad interpreter: No such file or directory
Re: [Cooker] no DMA in linux-2.6.0-0.test9.5mdk
On Wed, 12 Nov 2003 21:49:01 +0100 (MET) Svetoslav Slavtchev [EMAIL PROTECTED] wrote: very short note (will come back later with longer one :) ) wanna include some 3rdparty stuff ?-) Why not :) That won't kill me or significantly increase the built time. i'm trying to ?port? the mdk 3rdparty modules to 2.6 great and i almost, partly got it, but ... 1.) grrr, i've no idea how to fix one issue make clean doesn't work after make mrproper( probably distclean too) I guess you only need to copy /boot/config in the kernel sources directory. I'll work on a solution for all this mess soon. 2.) i can not find external drivers that work with 2.6 here is what i got to compile (in one or another way, mostly troubled by prism2, ov511 also needs fixing:() Nice, where can I pick all this modules to include them in my nightly build ? :) best, svetljo PS 1) atmel-ng is berlios driver with intersil support 2.) lirc probably needs some tweaking/fixing too # # Unofficial 3rd party kernel additions # CONFIG_ACX100=m CONFIG_ATMEL_NG=m CONFIG_HOSTAP=m CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_PLX=m CONFIG_HOSTAP_PCI=m CONFIG_HOSTAP_CS=m # # Linux InfraRed Controller # CONFIG_LIRC=y CONFIG_LIRC_SUPPORT=y CONFIG_LIRC_MAX_DEV=2 CONFIG_LIRC_GPIO=m # CONFIG_LIRC_BT829 is not set CONFIG_LIRC_IT87=m CONFIG_LIRC_ATIUSB=m CONFIG_LIRC_SERIAL=m CONFIG_LIRC_HOMEBREW=y # CONFIG_LIRC_SERIAL_ANIMAX is not set # CONFIG_LIRC_SERIAL_IRDEO is not set # CONFIG_LIRC_SERIAL_IRDEO_REMOTE is not set # CONFIG_LIRC_SERIAL_TRANSMITTER is not set # CONFIG_LIRC_SERIAL_IGOR is not set CONFIG_LIRC_SERIAL_COM1=y # CONFIG_LIRC_SERIAL_COM2 is not set # CONFIG_LIRC_SERIAL_COM3 is not set # CONFIG_LIRC_SERIAL_COM4 is not set # CONFIG_LIRC_SERIAL_OTHER is not set CONFIG_LIRC_PORT_SERIAL=0x3f8 CONFIG_LIRC_IRQ_SERIAL=0x4 CONFIG_LIRC_SIR=m CONFIG_LIRC_SIR_IRDA=m CONFIG_LIRC_SIR_TEKRAM=m CONFIG_LIRC_SIR_ACTISYS_ACT200L=m CONFIG_LIRC_SIR_COM1=y # CONFIG_LIRC_SIR_COM2 is not set # CONFIG_LIRC_SIR_COM3 is not set # CONFIG_LIRC_SIR_COM4 is not set # CONFIG_LIRC_SIR_OTHER is not set CONFIG_LIRC_PORT_SIR=0x3f8 CONFIG_LIRC_IRQ_SIR=0x4 CONFIG_LUFS=m CONFIG_PRISM54=m CONFIG_QC_USB=m # # Prism2.5 wireless support # CONFIG_PRISM25=m CONFIG_P80211=m CONFIG_PRISM2_PLX=m CONFIG_PRISM2_PCI=m # CONFIG_PRISM2_USB is not set CONFIG_PRISM2_CS=m # CONFIG_OV511 is not set -- Olivier Blin
[Cooker] [Bug 6340] [gcc] New: gcc misoptimization with -march=i586 -mcpu=pentiumpro
http://qa.mandrakesoft.com/show_bug.cgi?id=6340 Summary: gcc misoptimization with -march=i586 -mcpu=pentiumpro Product: gcc Version: 3.3.1-2mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 Component: gcc AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] to reproduce : -build sound-juicer 0.5.7 (available from contrib) with -march=i586 -mcpu=pentiumpro, run it, press extract then close the popup window with your window manager = crash -build only sj-extracting.c without this optimizations, and everything works correctly. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 6332] [yelp] when installing Galeon and gnome-media errors with yelp
http://qa.mandrakesoft.com/show_bug.cgi?id=6332 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-11-12 17:59 --- Fixed in yelp 2.4.2-2mdk yelp-custom.xsl wasn't a XML Namespace 1.0 compliant file.. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: when installing Galeon and gnome-media, errors like below occurs. this is with yelp-2.4.1-1mdk, and up2date cooker. installing /home/cooker/Mandrake/Mandrake/RPMS/gnome-media-2.4.1.1-1mdk.i586.rpm Preparing...## 1:gnome-media## /usr/share/sgml/docbook/yelp/yelp-custom.xsl:18: namespace error : Namespace prefix doc for type on param is not defined xsl:param name=graphic.default.extension select='png' doc:type=string/ ^ /usr/share/sgml/docbook/yelp/yelp-custom.xsl:136: namespace error : Namespace prefix doc for type on param is not defined xsl:param name=make.year.ranges select=1 doc:type=boolean/ ^ /usr/share/sgml/docbook/yelp/yelp-custom.xsl:1073: namespace error : Namespace prefix doc for type on param is not defined xsl:param name=generate.book.toc select=1 doc:type=boolean/ ^ /usr/share/sgml/docbook/yelp/yelp-custom.xsl:1076: namespace error : Namespace prefix doc for type on param is not defined xsl:param name=generate.article.toc select=1 doc:type=boolean/ ^ /usr/share/sgml/docbook/yelp/yelp-custom.xsl:1079: namespace error : Namespace prefix doc for type on param is not defined xsl:param name=generate.part.toc select=1 doc:type=boolean/ ^ /usr/share/sgml/docbook/yelp/yelp-custom.xsl:1082: namespace error : Namespace prefix doc for type on param is not defined xsl:param name=chapter.autolabel select=1 doc:type=boolean/ ^ /usr/share/sgml/docbook/yelp/yelp-custom.xsl:1085: namespace error : Namespace prefix doc for type on param is not defined xsl:param name=section.autolabel select=1 doc:type =boolean/ ^
[Cooker] New mutt for testing
Hi all, I've compiled mutt 1.5.5.1i and plan to upload it soon, but it would be better if it has some more testing, in particular NNTP support and saving history, which I just added. NNTP patch is quite a large patch. Here is the URL: http://deaddog.org/Mandrake/cooker/mutt/mutt-1.5.5.1i-1mdk.i586.rpm http://deaddog.org/Mandrake/cooker/mutt/mutt-1.5.5.1i-1mdk.src.rpm http://deaddog.org/Mandrake/cooker/mutt/mutt-1.5.5.1i-1.widechar.mdk.i586.rpm The last one is built against ncurses which has wide char support. It was necessary for me, since I'm using UTF-8 locale and mutt would mis-ident under thread mode. Not sure if it's because I'm using multibyte locale. If you have no idea what I'm talking about, please look at: http://deaddog.org/~maddog/screenshot/bad-mutt.png I think the normal package and the one with wide char support basically means mutt vs. mutt-utf8 under Debian. I've compiled the ncurses with wchar_t under ../ncurses/ (sorry, it's for i686). Hope I can get Pixel to have a look and incorporate it into ncurses package soon. Please tell me if the packages work for you, thanks! Abel -- Abel Cheung Linux counter #256983 | http://counter.li.org GPG Key: (0xC67186FF) | http://deaddog.org/gpg.asc Key fingerprint: 671C C7AE EFB5 110C D6D1 41EE 4152 E1F1 C671 86FF pgp0.pgp Description: PGP signature
Re: [Cooker] spamassassin broken
On Wed, 12 Nov 2003 16:57:43 -0500 Salane KIng [EMAIL PROTECTED] scribed on electronic parchment: two errors from spamassissin probably related to perl service spamassassin start Starting spamd: execvp: No such file or directory [FAILED] sa-learn --spam --showdots --dir /home/salane/.Mail/spam-id/cur/ bash: /usr//bin/sa-learn: /usr/bin/perl5.8.1: bad interpreter: No such file or directory This may or may not help, but try sa-learn --import in a terminal. Did you upgrade to spamassassin 2.60? This it the fix for the upgrade, but I cannot remember the error exactly. Tim -- _ ( ) ASCII ribbon campaign against HTML e-mail x registered Linux user # 329428 / \ GnuPG KeyID 6B5A70DF www.keyserver.net pgp0.pgp Description: PGP signature
Re: [Cooker] spamassassin broken
Le Wednesday 12 November 2003 22:57, Salane KIng a écrit : two errors from spamassissin probably related to perl service spamassassin start Starting spamd: execvp: No such file or directory [FAILED] sa-learn --spam --showdots --dir /home/salane/.Mail/spam-id/cur/ bash: /usr//bin/sa-learn: /usr/bin/perl5.8.1: bad interpreter: No such file or directory Cf http://marc.theaimsgroup.com/?l=mandrake-cookerm=106854407318495w=2 I suppose that spamassassin is broken because perl is broken. Franck
Re: [Cooker] spamassassin broken
On Wednesday 12 November 2003 05:31 pm, Shift wrote: Le Wednesday 12 November 2003 22:57, Salane KIng a écrit : two errors from spamassissin probably related to perl service spamassassin start Starting spamd: execvp: No such file or directory [FAILED] sa-learn --spam --showdots --dir /home/salane/.Mail/spam-id/cur/ bash: /usr//bin/sa-learn: /usr/bin/perl5.8.1: bad interpreter: No such file or directory Cf http://marc.theaimsgroup.com/?l=mandrake-cookerm=106854407318495w=2 I suppose that spamassassin is broken because perl is broken. Franck Yep I downloaded the src.rpm and did a rebuild on it. Now it works fine. I did have to do an sa-learn --import on it before I used sa-learn though.
[Cooker] [Bug 5673] [kernel] SIS 746FX - lost interrupts
http://qa.mandrakesoft.com/show_bug.cgi?id=5673 --- Additional Comments From [EMAIL PROTECTED] 2003-11-12 18:18 --- Have you tried booting with 'acpi=off'? This fixes problems for me on the machines I have seen with this problem. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Mainboard: ASRock K7S8X, SIS 746FX chipset, Bios 1.90 Sept, 15, 2003 I tried to boot up from 9.2rc2 CD 1. It detected my IDE-chipset as SIS 5513: SIS 962/963 MuIOL UDMA/133 Then it got problems while detecting my HDDs: hda: attached ide-disk driver hda: lost interrupt hda: lost interrupt hda: lost interrupt hda: host protected ares=J1 hda: lost interrupt hda: xxx sectors etc. (harddisk properly detected) from the first lost interrupt to the detection of my first harddisk two minutes elapsed. As it tried to detect my hdc and started again with hdc: lost interrupt I stopped the installation. Maybe a workaround for this could be to use the kernel - parameter noapic, but this would be a *workaround* only. On my current 9.1 installation with kernel 2.4.21 I also get APIC-errors in /var/log/messages even when starting with the noapic - option :-( Any help would be appreciated! Thank you!
[Cooker] [Bug 6340] [gcc] gcc misoptimization with -march=i586 -mcpu=pentiumpro
http://qa.mandrakesoft.com/show_bug.cgi?id=6340 --- Additional Comments From [EMAIL PROTECTED] 2003-11-12 18:40 --- Created an attachment (id=965) -- (http://qa.mandrakesoft.com/attachment.cgi?id=965action=view) preprocessed sj-extracting.c I got this when compiling with -E -O2 -fomit-frame-pointer -pipe -march=i586 -mcpu=pentiumpro -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: to reproduce : -build sound-juicer 0.5.7 (available from contrib) with -march=i586 -mcpu=pentiumpro, run it, press extract then close the popup window with your window manager = crash -build only sj-extracting.c without this optimizations, and everything works correctly.
Re: [Cooker] no DMA in linux-2.6.0-0.test9.5mdk
On Wed, 12 Nov 2003 21:49:01 +0100 (MET) Svetoslav Slavtchev [EMAIL PROTECTED] wrote: very short note (will come back later with longer one :) ) wanna include some 3rdparty stuff ?-) Why not :) That won't kill me or significantly increase the built time. greate :-) i'm trying to ?port? the mdk 3rdparty modules to 2.6 great and i almost, partly got it, but ... 1.) grrr, i've no idea how to fix one issue make clean doesn't work after make mrproper( probably distclean too) I guess you only need to copy /boot/config in the kernel sources directory. I'll work on a solution for all this mess soon. no the patch i attached isn't finished/ is partly brocken everything seems OK, but `make mrproper` deletes 3rdparty/Makefile and `make clean` needs it to clean 3rdarty/*/* (although it's already clean :( ) 2.) i can not find external drivers that work with 2.6 here is what i got to compile (in one or another way, mostly troubled by prism2, ov511 also needs fixing:() Nice, where can I pick all this modules to include them in my nightly build ? :) i'll upload a nosrc.rpm shortly (omited only the linux tarball) but it freezes shortly after boot is finished on my system since -bk9 (the same patch tarball woked OK till -bk7 :( ) url is http://varna.demon.co.uk/~svetlio/cook/2.6/ on second thought, i'll upload also the patches tarball look for linux-2.6.0-test9s3.tar.bz2 :-) the not enabled options are broken sorry but longer mail, will still have to wait at least an hour :( PS 1) atmel-ng is berlios driver with intersil support 2.) lirc probably needs some tweaking/fixing too # # Unofficial 3rd party kernel additions # CONFIG_ACX100=m CONFIG_ATMEL_NG=m // have to switch to the cryptic name from 2.4x-xq CONFIG_HOSTAP=m CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_PLX=m CONFIG_HOSTAP_PCI=m CONFIG_HOSTAP_CS=m # # Linux InfraRed Controller # CONFIG_LIRC=y CONFIG_LIRC_SUPPORT=y CONFIG_LIRC_MAX_DEV=2 CONFIG_LIRC_GPIO=m # CONFIG_LIRC_BT829 is not set / i2c broken ? CONFIG_LIRC_IT87=m CONFIG_LIRC_ATIUSB=m CONFIG_LIRC_SERIAL=m this following are currently choice, i'll try to figure out smth to build them as separate module CONFIG_LIRC_HOMEBREW=y # CONFIG_LIRC_SERIAL_ANIMAX is not set # CONFIG_LIRC_SERIAL_IRDEO is not set # CONFIG_LIRC_SERIAL_IRDEO_REMOTE is not set # CONFIG_LIRC_SERIAL_TRANSMITTER is not set # CONFIG_LIRC_SERIAL_IGOR is not set CONFIG_LIRC_SERIAL_COM1=y # CONFIG_LIRC_SERIAL_COM2 is not set # CONFIG_LIRC_SERIAL_COM3 is not set # CONFIG_LIRC_SERIAL_COM4 is not set # CONFIG_LIRC_SERIAL_OTHER is not set CONFIG_LIRC_PORT_SERIAL=0x3f8 CONFIG_LIRC_IRQ_SERIAL=0x4 this one's were also a choice i splitted them // needs testing :) CONFIG_LIRC_SIR=m CONFIG_LIRC_SIR_IRDA=m CONFIG_LIRC_SIR_TEKRAM=m CONFIG_LIRC_SIR_ACTISYS_ACT200L=m CONFIG_LIRC_SIR_COM1=y # CONFIG_LIRC_SIR_COM2 is not set # CONFIG_LIRC_SIR_COM3 is not set # CONFIG_LIRC_SIR_COM4 is not set # CONFIG_LIRC_SIR_OTHER is not set CONFIG_LIRC_PORT_SIR=0x3f8 CONFIG_LIRC_IRQ_SIR=0x4 CONFIG_LUFS=m CONFIG_PRISM54=m CONFIG_QC_USB=m # # Prism2.5 wireless support # CONFIG_PRISM25=m CONFIG_P80211=m CONFIG_PRISM2_PLX=m CONFIG_PRISM2_PCI=m CONFIG_PRISM2_CS=m originaly only P80211 PRISM2_PLX did compile, i came with MD01-prism2sta.c-remove_release.patch, and i wrote to wlan-ng to ask wether the patch is OK, but no reply yet, and my messege have not yet hit the list :( # CONFIG_PRISM2_USB is not set broken # CONFIG_OV511 is not set // i2c needs fixing svetljo -- NEU FÜR ALLE - GMX MediaCenter - für Fotos, Musik, Dateien... Fotoalbum, File Sharing, MMS, Multimedia-Gruß, GMX FotoService Jetzt kostenlos anmelden unter http://www.gmx.net +++ GMX - die erste Adresse für Mail, Message, More! +++
[Cooker] Orphan files ?
I'm looking for some guidance on trying to find the package which owns a file. Several times now when I've had a problem with a particular executable or one of the initialization script files, I've tried to find the owning package for purposes of filing a bug report by using rpmdrake's seach on filename feature, only to get no hits from the search. The latest example is /usr/bin/update-menus. Should this technique work, or should I be doing something else ?
[Cooker] [Bug 6273] [Installation] bootsplash can not be unmarked in package list
http://qa.mandrakesoft.com/show_bug.cgi?id=6273 --- Additional Comments From [EMAIL PROTECTED] 2003-11-12 19:49 --- I tested this once more today installing 9.2 from PowerPack DVD. Situation was the same, namely unmarking bootsplash in package list leads to warning about deleting from install list so many graphical things that it is not possible even to see whole list. Seems that whole KKDE and Gnome environment would be gone when unmarking one single bootsplash. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Well it can be unmarked but the warning follows that almost all KDE, Gnome etc. is going to be excluded from installation as well. The following packages are going to be removed list is much longer than warning window can show (BTW this warning window is not scrollable, as anyone can see trying to unmark bootsplash, so you even canot see what else is NOT going to be installed... ;-) You might understand that not everyone wants to close boot screen text messages with some much less informative bootsplash. If somebody wants to partially blind himself, that's OK for him... I don't want to. For me the easiest way NOT to see this bootsplash at all has been in 9.1 simply to not install it. Unmark during the installation. Now with 9.2 it seems impossible because simple unmarking of bootsplash in Graphical Environment - KDE Workstation - bootsplash seems to imply mandatory unmarking whole graphical interface set with it. Something is wrong with this. I want to get rid of bootsplash but still use KDE and whole lot of Graphic.
Re: [Cooker] Orphan files ?
On Wed, 2003-11-12 at 15:24, Frank Griffin wrote: I'm looking for some guidance on trying to find the package which owns a file. Several times now when I've had a problem with a particular executable or one of the initialization script files, I've tried to find the owning package for purposes of filing a bug report by using rpmdrake's seach on filename feature, only to get no hits from the search. The latest example is /usr/bin/update-menus. Should this technique work, or should I be doing something else ? urpmf /usr/bin/update-menus will give you the package that includes that file. James
Re: [Cooker] Orphan files ?
Frank Griffin wrote: I'm looking for some guidance on trying to find the package which owns a file. Several times now when I've had a problem with a particular executable or one of the initialization script files, I've tried to find the owning package for purposes of filing a bug report by using rpmdrake's seach on filename feature, only to get no hits from the search. The latest example is /usr/bin/update-menus. Should this technique work, or should I be doing something else ? It seems as though this should work. Using urpmf --files update-menus returns the following results: menu:/usr/bin/update-menus menu:/usr/share/man/man1/update-menus.1.bz2 So, /usr/bin/update-menus belongs to the menu package. (menu-2.1.5-124mdk) Note: Obviously, this is only going to work 100% if your urpmi database matches your currently installed packages since packages are often removed and, though less frequent an occurance, files may switch between packages (eg. all the recent KDE changes). -Michael
Re: [Cooker] Orphan files ?
On Wed, 2003-11-12 at 15:42, Michael Altizer wrote: Frank Griffin wrote: I'm looking for some guidance on trying to find the package which owns a file. Several times now when I've had a problem with a particular executable or one of the initialization script files, I've tried to find the owning package for purposes of filing a bug report by using rpmdrake's seach on filename feature, only to get no hits from the search. The latest example is /usr/bin/update-menus. Should this technique work, or should I be doing something else ? It seems as though this should work. Using urpmf --files update-menus returns the following results: menu:/usr/bin/update-menus menu:/usr/share/man/man1/update-menus.1.bz2 So, /usr/bin/update-menus belongs to the menu package. (menu-2.1.5-124mdk) Note: Obviously, this is only going to work 100% if your urpmi database matches your currently installed packages since packages are often removed and, though less frequent an occurance, files may switch between packages (eg. all the recent KDE changes). -Michael Correct I am making two assumptions. 1. That current state of the urpmi database is == current installed status. 2. That this method is more usefull on a stable system than a dev system. An alternative. rpm -q --whatprovides /usr/bin/update-menus I've often found that giving full path to a file results in fewer orphan statements than normal. James
[Cooker] Missing bootsplash options in Drakboot
This is something that has bugged me for weeks - I can never seem to get the bootsplash options in Drakboot. Actually, I did get them a month ago or so, but since I've upgraded to the 2.4.22 (and tried out 2.6.0) kernel, I don't get the options. I'm not sure how to troubleshoot this - anyone got any ideas? Is there a prerequisite in the initrd file in order to be able to see the bootsplash info in Drakboot? These are what I currently have on my system, but it's been doing this for weeks with previous packages as well: kernel-tmb-enterprise-2.4.22.21.tmb.2mdk-1-1mdk drakconf-9.3-1mdk drakxtools-9.3-5mdk drakxtools-newt-9.3-5mdk drakxtools-http-9.3-5mdk -- Élie Charest [EMAIL PROTECTED] http://archie.homelinux.net:8080
Re: [Cooker] Orphan files ?
James Sparenberg wrote: urpmf /usr/bin/update-menus will give you the package that includes that file. Michael Altizer wrote: It seems as though this should work. Using urpmf --files update-menus returns the following results: menu:/usr/bin/update-menus menu:/usr/share/man/man1/update-menus.1.bz2 Hmm. It appears that I have a /usr/bin/update-menus without having the menus package installed. I've also got the man page. However If I do what you suggested, I get: [EMAIL PROTECTED] ftg]# urpmf --files update-menus majesty-demo:/usr/local/games/maj_demo/.manifest/scripts/update-menus.sh mindrover-demo:/usr/games/mindrover_demo/.manifest/scripts/update-menus.sh [EMAIL PROTECTED] ftg]# urpmf /usr/bin/update-menus [EMAIL PROTECTED] ftg]# urpmi menu Everything already installed [EMAIL PROTECTED] ftg]# In addition, if I look in my cooker tree, I have menu-2.1.5-124mdk.i586.rpm but neither rpmdrake install nor rpmdrake remove lists the package when I select list all packages, alphabetical. A urpmi.update -a made absolutely no difference in these results. Is there some lower-level query I can do to discern why urpmi thinks the package is installed and I can see that the files are present, but rpmdrake thinks it is neither here nor there ?
Re: [Cooker] Orphan files ?
On Thu, 13 Nov 2003 07:24, Frank Griffin wrote: The latest example is /usr/bin/update-menus. $ rpm -qf /usr/bin/update-menus menu-2.1.5-123mdk $ Cheers; Leon
Re: [Cooker] Orphan files ?
James Sparenberg wrote: An alternative. rpm -q --whatprovides /usr/bin/update-menus [EMAIL PROTECTED] ftg]# rpm -q --whatprovides /usr/bin/update-menus menu-2.1.5-124mdk
Re: [Cooker] Orphan files ?
Leon Brooks wrote: $ rpm -qf /usr/bin/update-menus menu-2.1.5-123mdk [EMAIL PROTECTED] ftg]# rpm -qf /usr/bin/update-menus menu-2.1.5-124mdk
[Cooker] qt still crapped?
[EMAIL PROTECTED] rpm]$ qjackctl Loading required GL library /usr/X11R6/lib/libGL.so.1.2 Warning: no locale found: /usr/share/locale/qjackctl_en_US.qm No Motif style available! [EMAIL PROTECTED] rpm]$ Austin -- Austin Acton Synthetic Organic Chemist, Teaching Assistant, Ph.D. Candidate Department of Chemistry, York University, Toronto MandrakeLinux Volunteer Developer, homepage: www.groundstate.ca
Re: [Cooker] Orphan files ?
On Thu, 13 Nov 2003 08:13, Frank Griffin wrote: It appears that I have a /usr/bin/update-menus without having the menus package installed. I've also got the man page. Try this: rm -vf /var/lib/rpm/__db.00* rpm --rebuilddb Cheers; Leon
Re: [Cooker] Missing bootsplash options in Drakboot
On Wed, 12 Nov 2003 19:09:55 -0500 Élie Charest [EMAIL PROTECTED] wrote: This is something that has bugged me for weeks - I can never seem to get the bootsplash options in Drakboot. Actually, I did get them a month ago or so, but since I've upgraded to the 2.4.22 (and tried out 2.6.0) kernel, I don't get the options. I'm not sure how to troubleshoot this - anyone got any ideas? Is there a prerequisite in the initrd file in order to be able to see the bootsplash info in Drakboot? This bootplash panel has been disabled since months in Drakboot, while it works fine, I don't understand why. Can some MandrakeSoft people explain us what's wrong with it ? It only uses the switch-themes script IIRC. -- Olivier Blin
[Cooker] [Bug 6317] [rpmdrake] no cancel button in progress windows
http://qa.mandrakesoft.com/show_bug.cgi?id=6317 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |ASSIGNED --- Additional Comments From [EMAIL PROTECTED] 2003-11-12 20:51 --- adding it to my todo. will try to feature that in next release. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: When rpmdrake downloads packages that are selected for install, there is no cancel button in the progress window. This is annoying when you notice you have selected for 500 Mbytes worth of packages (KDE 3.2 ;-)) and you don't have enough time. You have to close the windows and then kill the left processes by hand.
Re: [Cooker] Orphan files ?
Leon Brooks wrote: Try this: rm -vf /var/lib/rpm/__db.00* rpm --rebuilddb I'll be happy to, but one of the reasons to post this was to see if anybody wanted a snapshot of the existing files that seem to cause urpmi to recognize that the package is installed but neither urpmf nor rpmdrake to recognize the files included in it, or in the case of rpmdrake, that the package even exists (since it isn't recognized as being either installed or not). If somebody can tell me which files to copy off to the side for inclusion with a bug report, I'll be happy to move on. If the responsible parties aren't interested, then please just say so, and I'll abandon trying to preserve evidence
Re: [Cooker] Orphan files ?
On Thu, 13 Nov 2003 08:49, Frank Griffin wrote: Leon Brooks wrote: Try this: rm -vf /var/lib/rpm/__db.00* rpm --rebuilddb I'll be happy to, but one of the reasons to post this was to see if anybody wanted a snapshot of the existing files that seem to cause urpmi to recognize that the package is installed but neither urpmf nor rpmdrake to recognize the files included in it, or in the case of rpmdrake, that the package even exists (since it isn't recognized as being either installed or not). If somebody can tell me which files to copy off to the side for inclusion with a bug report, I'll be happy to move on. If the responsible parties aren't interested, then please just say so, and I'll abandon trying to preserve evidence Since RPM itself seems to be happy, the contents of /var/lib/urpmi would seem to be what's required (about 20MB on my machine). If you wanted to be safe, put aside /var/lib/rpm as well (about 23MB here). Cheers; Leon
[Cooker] [Bug 6012] [rpmdrake] rpmdrake doesn't finish sorting package names
http://qa.mandrakesoft.com/show_bug.cgi?id=6012 --- Additional Comments From [EMAIL PROTECTED] 2003-11-12 20:52 --- can you check your hdlist.cz (or synthesis) are correct, can you reproduce, and tell me for which packages that happen? -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Package names are listed (the flat listing) in an almost-sorted order, with many entries scattered up to a few dozen positions from where they should be, and the odd one or two at the other end of the list. Frozen cooker as fetched from planetmirror today.
[Cooker] [Bug 6320] [xboard] Cannot start xboard
http://qa.mandrakesoft.com/show_bug.cgi?id=6320 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-11-12 20:56 --- - path problem: /usr/games should be in the path of all users. aren't you running the game in root, bad bad boy? - fixing packaging problem (4.2.6-7mdk) -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: The file /usr/bin/xboard is missing. Have tried reinstalling but same results.
[Cooker] [Bug 6237] [rpmdrake] Revert to official package
http://qa.mandrakesoft.com/show_bug.cgi?id=6237 --- Additional Comments From [EMAIL PROTECTED] 2003-11-12 21:06 --- We dont' have urpmi alike dependencies informations for downgrading :/. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: I like to try plf and texstar packages (say kde). If they don't work well, I want to return to mandrake's equivalent packages. This is not supported by rpmdrake. THe best I could think is either: 1) uninstall kde via the gui, then uncheck plf repository, the reinstall kde. 2) download the packages manually, then rpm --force. Both ways have serious disadvantages: -you have to download the older packages again. They should have been kept in the cache. -The second way has another disadvantage: it forces you to use the cli. -The first way forces you to uninstall kde, so you have to use either gnome or cli.
[Cooker] iptables nat not working in 9.2
Hello I recently discovered that iptables 1.2.8 nat command does not work fully in 9.2 on i586 Something like this: iptables -t nat -A PREROUTING -i eth0 -d xx.xx.xx.xx -p tcp -m tcp --dport 23 -j DNAT --to-destination yy.yy.yy.yy:23 wont work with invalid error message. I made this command up but the exact command is not important, but DNAT to a different destination and even just REDIRECT to a different port is giving the invalid error message. I investigated further and tried the following: Recompiling the srpms in i386 mode they still fail. Downloading the redhat 1.2.7 srpms and recompiiling them they also fail Installing the redhat9 1.2.7 binary rpms they work fine. Not sure where exactly the error is, but compiling iptables _on_ mandrake 9.2 i586 seems to cause the problem. Con Kolivas P.S. Please CC me if you wish me to see your response as I'm not subscribed to mailing list
[Cooker] [Bug 6173] [Installation] MD5SUM error during Mandrake 9.2 Web/FTP Installation
http://qa.mandrakesoft.com/show_bug.cgi?id=6173 --- Additional Comments From [EMAIL PROTECTED] 2003-11-12 21:08 --- this has no connection with installation/stage1. can you recheck? this was probably a mirrors problem. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Doing an 'urpmi.update -a', I always get a MD5 error for the Mandrake 9.2 Install tree. I use http://ftp.club-internet.fr /pub/unix/linux/Mandrake/9.2/i586/Mandrake/RPMS/ The wrong MD5 sums appear for both hdlist.cz and synthesis.hdlist.cz files as taken from ../base I compared the md5sums of the two files with the sums in the ../base/MD5SUM list after downloading hdlist.cz, synthesis.hdlist.cz, and MD5SUM. These are the results: [EMAIL PROTECTED] MDK]$ md5sum hdlist.cz 745ca56870debc616e3a1a48e96064d7 hdlist.cz [EMAIL PROTECTED] MDK]$ md5sum synthesis.hdlist.cz cac3f2567e0e3a3164cca1500fc4a4ed synthesis.hdlist.cz [EMAIL PROTECTED] MDK]$ egrep ' (synthesis\.|)hdlist\.cz$' MD5SUM cf6254a7afa19e470e8662b3d923120c hdlist.cz 5a2a653536e87d269809469cdc91b9dc synthesis.hdlist.cz [EMAIL PROTECTED] MDK]$ md5sum --check MD5SUM hdlist.cz: Fehlschlag synthesis.hdlist.cz: Fehlschlag md5sum: Warnung: 2 von 2 berechneten Prüfsummen passten NICHT (Because I use the german localization of MandrakeLinux, here a short translation: Fehlschlag means failure, and the last line: Warning: 2 of 2 calculated checksums doesn't match) Here is my uname -a line for identifying my environment: [EMAIL PROTECTED] MDK]$ uname -a Linux machine 2.4.22-16mdk #1 Fri Oct 17 05:08:42 CEST 2003 i686 unknown unknown GNU/Linux I use urpmi version 4.4 I think the recreation of hdlist.cz and synthesis.hdlist.cz and the recreation of the MD5SUM file should solve the problem. Probably the MD5SUM step is enough if the validity of the two files can be confirmed. Kindest regards, Guenter
[Cooker] [Bug 6341] [gnumeric] New: post install creates html files in /
http://qa.mandrakesoft.com/show_bug.cgi?id=6341 Summary: post install creates html files in / Product: gnumeric Version: 1.2.0-1mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 Component: packaging AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] Installation of gnumeric creates the following files in /: ld-id2463288.html ld-id2464404.html ld-id2466338.html ld-id2466408.html ld-id2466446.html ld-id2466530.html ld-id2466598.html ld-id2466712.html ld-id2466830.html I guess they are created by yelp-pregenerate in post install. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 6342] [mailman] New: install problem with the fr locale, template is missing
http://qa.mandrakesoft.com/show_bug.cgi?id=6342 Summary: install problem with the fr locale, template is missing Product: mailman Version: 2.1.2-9mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 Component: mailman AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] The su -c ./bin/newlist mailman mail command fails to create a new list. Some template is missing. Only the fr template is present (maybe detected by the locale) and it is therefore mandatory to put DEFAULT_SERVER_LANGUAGE = 'fr' in mm_cfg.py -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] kdepim-kmail-3.1.93-7mdk kmail doesn't start
kmail libkdenetwork: creating new pgp object libkdenetwork: Kpgp: gpg found kmail: No Qt-native utf-7 codec found; registering QUtf7Codec from libkdenetwork kmail: relocation error: /usr/lib/libkmailprivate.so.0: undefined symbol: _ZN13KSharedConfig10openConfigERK7QString ERROR: Communication problem with kmail, it probably crashed.
Re: [Cooker] no DMA in linux-2.6.0-0.test9.5mdk
On Wed, 12 Nov 2003 10:26:04 -0600 Bret Baptist [EMAIL PROTECTED] wrote: I know that my VIA82CXXX IDE chipset module was not placed in the initrd. I remade the initrd with the module using --with=via82cxxx, then I found out that ide drivers don't work well as modules So I rebuilt the kernel. :-) What do you mean by ide drivers don't work well as modules ? Do they even load ? -- Olivier Blin
[Cooker] [Bug 1253] [Hardware] usb 2.0 problem
http://qa.mandrakesoft.com/show_bug.cgi?id=1253 --- Additional Comments From [EMAIL PROTECTED] 2003-08-29 18:26 --- No activity has been seen on this bug since 20030203 and it is still in UNCONFIRMED state. This probably means that the information provided was not clear enough, or that the bug is not valid anymore. Please test and confirm that this bug is still valid with the latest cooker version, or close it. --- Additional Comments From [EMAIL PROTECTED] 2003-11-12 22:52 --- I have the same experience, asus a7v333 motherboard (also VIA usb controller). On Mandrake 9.1 the usb2.0 ports seem to perform fine, but after transferring considerable amounts of data (couple of 700MB files), it just stops. When the bios is set to usb legacy support, it stops much much earlier (after some 80MB or so). (I have the latest bios for this board, 1017, dating from May 2003.) I now tried on Mandrake 9.2 with the stock kernel and just now with the updated kernel, kernel-i686-up-4GB-2.4.22.21mdk. On both the behaviour is the same: very low throughput (seems usb1 speed, around 1MB/s or less), and cpu load goes to 94-100%. This is with an Athlon 2400+ cpu. On Mandrake 9.1 the cpu load would stay low for a bit, then gradually rise to 60-70% BTW hotplugging is working fine since 9.2; I don't get a desktop icon, but can just browse to /mnt/removable and all is there. This part works fine. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Hi!... I am using Mandrake beta 2.0 and I have problem with USB 2.0 I got mass storage device connected to USB 2.0 kontroler from VIA... USB Controller: VIA Technologies, Inc. USB 2.0 (rev 81). Mass storage device is hdd (20 gb IBM) in external case... It seems that everything is working ok, but when I start copying files to my usb hdd, load average goes up very quickly, and when it came to around 2.5 usb device stop responding. After that I cannot umount the device, I cannot reset or shutdown machine Kernel is 2.4.21-0.pre3.1mdk p.s. I had also problem like this with Mandrake 9.0, 9.1 beta 1...
Re: [Cooker] kdepim-kmail-3.1.93-7mdk kmail doesn't start
kmail libkdenetwork: creating new pgp object libkdenetwork: Kpgp: gpg found kmail: No Qt-native utf-7 codec found; registering QUtf7Codec from libkdenetwork kmail: relocation error: /usr/lib/libkmailprivate.so.0: undefined symbol: _ZN13KSharedConfig10openConfigERK7QString ERROR: Communication problem with kmail, it probably crashed. I get this too, and similar crashes for korganizer and knode, all from the 3.1.93-7 packages. Andy Neitzke
Re: [Cooker] Danger: Magazine with 9.2 with problematic kernel
Buchan Milne wrote: And where on the mandrake site is a listing of exactly what is on the commercial cds From: http://www.linux-mandrake.com/en/9.2/features/ Additional drivers for NVIDIA-based and ATI videocards are available in Mandrake packs. or less than a week old list of whats on the club site?? http://rpms.mandrakeclub.com (which is where you get if you click on the big downloads link at the top of the mandrakeclub.com page) - -- im going to assume that neither list is complete (the cd list only gives the download edition files and the club area doesn't seem to have any files (for 9.2)) the questions stand
[Cooker] dead lg drives are not so dead
I copied this from pclinuxonline but I thought others here would like to see this LG offers a solution for their sub par devices : Go to : http://us.lgservice.com/ Choose Product support, then Device driver, CD-ROM and Emergency download for Physical Dead Drive from Mandrake Linux 9.2 There is a Dead.gif file explaining the way to reflash the drive. Does it work ? -- New and improved with advanced outlook crash handler. !--input type -- -~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~- Brook Humphrey Mobile PC Medic, 420 1st, Cheney, WA 99004, 509-235-9107 http://www.webmedic.net, [EMAIL PROTECTED], [EMAIL PROTECTED] Holiness unto the Lord -~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-
[Cooker] [Bug 6343] [krusader] New: krusader in conflict with kdelibs-common
http://qa.mandrakesoft.com/show_bug.cgi?id=6343 Summary: krusader in conflict with kdelibs-common Product: krusader Version: 1.20-4mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: major Priority: P2 Component: packaging AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] krusader-1.20-4mdk is in conflict with file /usr/share/mimelnk/application/x-ace.desktop from kdelibs-common-3.1.93-14mdk, and all previous kdelibs-common-3.1.93-xx, AFAIR. If krusader was installed beforehand, one couldn't simply upgrade kde because of this issue. Additionally, the signature is missing. Also, when I tried to send this report, a message popped up: You are not reporting a bug for the last version available. Please upgrade to krusader version 1.20-3mdk or it is likely that you bug report will be ignored. It should be *your*, not *you*, and, 1.20-4mdk is obviously the version released after 1.20-3mdk... Below the output of urpmi krusader: # urpmi krusader (...) The following packages have bad signatures: /var/cache/urpmi/rpms/krusader-1.20-4mdk.i586.rpm: Missing signature (sha1 md5 OK) Do you want to continue installation ? (y/N) y installing /var/cache/urpmi/rpms/krusader-1.20-4mdk.i586.rpm Preparing...## Installation failed: file /usr/share/mimelnk/application/x-ace.desktop from install of krusader-1.20-4mdk conflicts with file from package kdelibs-common-3.1.93-14mdk -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 6344] [gnome2] New: Create Launcher window hides all others
http://qa.mandrakesoft.com/show_bug.cgi?id=6344 Summary: Create Launcher window hides all others Product: gnome2 Version: 2.4.0-3mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 Component: program AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] The Create Launcher window (Panel-Add to Panel-Launcher) lays over and hides child windows invoked from it such as the Icon browse selection and the Command browse selection. Even clicking the child window won't bring it in front of the Create Launcher window. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 6345] [mozilla] New: Download progress window hides all others
http://qa.mandrakesoft.com/show_bug.cgi?id=6345 Summary: Download progress window hides all others Product: mozilla Version: 1.4-15mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 Component: program AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] This bug is really for -16mdk, but that's not in the selection list. The download progress window refuses to allow other windows in front of it. This has been the case since at least 9.2RC2 and still is. It's a change in behavior from earlier 1.4 builds. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] Cannot vote for a defect with web interface
Software error:
DBD::mysql::st execute failed: Table 'bugs_activity' was not locked with LOCK TABLES
[for statement ``INSERT INTO bugs_activity (bug_id,who,bug_when,fieldid,removed,added)
VALUES (6341,9303,now(),8,'UNCONFIRMED','NEW')'']) at Bugzilla/DB.pm line 66
Bugzilla::DB::SendSQL('INSERT INTO bugs_activity
(bug_id,who,bug_when,fieldid,remove...') called at CGI.pl line 256
main::CheckIfVotedConfirmed(6341,9303) called at
/var/www/html/dimension/votes.cgi line 360
main::record_votes() called at /var/www/html/dimension/votes.cgi line 83
For help, please send mail to the webmaster ([EMAIL PROTECTED]),
giving this error message and the time and date of the error.
--
Quel Qun [EMAIL PROTECTED]
[Cooker] obsolete bugzilla account
How can I remove an obsolete bugzilla account? -- Quel Qun [EMAIL PROTECTED]
[Cooker] [Bug 5979] [rpm] urpmi problem--strange output
http://qa.mandrakesoft.com/show_bug.cgi?id=5979 --- Additional Comments From [EMAIL PROTECTED] 2003-11-13 00:48 --- Same problem when updating to 9.1 to 9.2: many rpmdb warnings: rpmdb: /var/lib/rpm/Pubkeys: unexpected file type or format and some lines like: ... invalid signatures ... package: incorrect signature (sha1 md5 (GPG) (MISSING KEY) GPG# NOT OK) --- additionnal informations: # rpm -q gpg-pubkey gpg-pubkey-- gpg-pubkey-- gpg-pubkey-- [ 3 differents lines] # rpm -V gpg-pubkey [No result] --- available for additionnal informations! -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: the following output is repeated (10-20 lines) when using urpmi to upgrade packages: rpmdb: /var/lib/rpm/Pubkeys: unexpected file type or format this does not prevent upgrade/install, but is rather disconcerting
