Re: [OT] Backup on DLT (recommandation)
On Sat, 2005-01-08 at 17:46 +0100, Michelle Konzack wrote: Because my old DAT is not more enough, I consider to buy a DLT with 80-160 GByte. Because I have no experience with it, I like to here some suggestions. My only problem is that my purse is very limited to =700 Euro. DLT is a quite expensive way to backup, especially considering the price of the tapes (50-100 euros). Depending on how many backups and how much data you want to keep around it might be interesting to look at other solutions (External harddrives, dvd, maybe blue-ray next year). Since harddrives run at about 100 euro's for 200 GB it's quite hard to beat those prices. Are the DLT only SCSI or do they exist in PATA and SATA too ? So far I've only seen SCSI versions, I'd think SATA is still quite far off for DLT (as there aren't even many cd/dvd drives on sata yet) -- Mark Janssen -- maniac(at)maniac.nl Unix / Linux, Open-Source and Internet Consultant PGP: 0x357D2178 Skype: markmjanssen ICQ: 129696007 signature.asc Description: This is a digitally signed message part
Re: Networking Between eth0 eth1
On Thu, 2004-10-14 at 10:34, Johnno wrote: Hello, I am running Debian Woody and have two ethernet cards in the computer.. The short answer is 'apt-get install ipmasq' and then run 'ipmasq' But you really should read the documentation as suggested in the previous replies... It's dangerous to have a system on the internet without knowing what it's doing and how it's doing it. - Firewalling - Routing - NAT -- Mark Janssen -- maniac(at)maniac.nl -- www.maniac.nl Unix / Linux, Open-Source and Internet Consultant PGP: D72C AFA4 E11F EF86 83FC 9F0F 6FAB ABBC 357D 2178 signature.asc Description: This is a digitally signed message part
Re: RAID-1 to RAID-5 online migration?
On Thu, 2004-09-02 at 13:43, Gavin Hamill wrote: Hello - just a quickie :) If I construct a RAID1 with two 200GB disks, will I be able to add a third disk and convert the whole set to a 400GB RAID5 later on by logically removing the second disk from the RAID1 set? Nope... migrating to a different raid configuration wipes your disks So you'll have to backup, migrate and restore. -- Mark Janssen -- maniac(at)maniac.nl -- GnuPG Key Id: 357D2178 Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT Maniac.nl Unix-God.Net|Org MarkJanssen.org|nl SyConOS.com|nl signature.asc Description: This is a digitally signed message part
Re: Watching and restarting processes - best tool?
On Wed, 2003-12-03 at 21:12, [EMAIL PROTECTED] wrote: Hi, what is the best tool for watching and restarting processes automatically? Thanks for your attention! I'm quite happy with 'monit'. It's packaged for debian, but a newer version exists that adds some nice features. I've made my own package so I could use the new features untill it lands in debian proper. Check monit: http://www.tildeslash.org/monit/ It check processes based on pid-files and can even check if the processes respond to specific commands (i.e. if your webserver still responds correctly to http requests, etc) -- Mark Janssen -- maniac(at)maniac.nl -- GnuPG Key Id: 357D2178 Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT Maniac.nl Unix-God.Net|Org MarkJanssen.org|nl SyConOS.com|nl -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Monitoring?
On Fri, 2003-12-05 at 10:04, Daniel Holze wrote: Hello debian-isp, anyone know a great Monitoring-Tool to monitor Apache Ping and something else. i look for MIDAS but ins to complicated to install :-/ Try monit... really easy ;) http://www.tildeslash.org/monit/ -- Mark Janssen -- maniac(at)maniac.nl -- GnuPG Key Id: 357D2178 Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT Maniac.nl Unix-God.Net|Org MarkJanssen.org|nl SyConOS.com|nl -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Monitoring?
On Sun, 2003-12-07 at 20:20, Mark Janssen wrote: Try monit... really easy ;) http://www.tildeslash.org/monit/ That should be... http://www.tildeslash.com/monit/ -- Mark Janssen -- maniac(at)maniac.nl -- GnuPG Key Id: 357D2178 Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT Maniac.nl Unix-God.Net|Org MarkJanssen.org|nl SyConOS.com|nl -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Monitoring?
On Sun, 2003-12-07 at 20:20, Mark Janssen wrote: Try monit... really easy ;) http://www.tildeslash.org/monit/ That should be... http://www.tildeslash.com/monit/ -- Mark Janssen -- maniac(at)maniac.nl -- GnuPG Key Id: 357D2178 Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT Maniac.nl Unix-God.Net|Org MarkJanssen.org|nl SyConOS.com|nl
Re: Watching and restarting processes - best tool?
On Wed, 2003-12-03 at 21:12, [EMAIL PROTECTED] wrote: Hi, what is the best tool for watching and restarting processes automatically? Thanks for your attention! I'm quite happy with 'monit'. It's packaged for debian, but a newer version exists that adds some nice features. I've made my own package so I could use the new features untill it lands in debian proper. Check monit: http://www.tildeslash.org/monit/ It check processes based on pid-files and can even check if the processes respond to specific commands (i.e. if your webserver still responds correctly to http requests, etc) -- Mark Janssen -- maniac(at)maniac.nl -- GnuPG Key Id: 357D2178 Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT Maniac.nl Unix-God.Net|Org MarkJanssen.org|nl SyConOS.com|nl
Re: Monitoring?
On Fri, 2003-12-05 at 10:04, Daniel Holze wrote: Hello debian-isp, anyone know a great Monitoring-Tool to monitor Apache Ping and something else. i look for MIDAS but ins to complicated to install :-/ Try monit... really easy ;) http://www.tildeslash.org/monit/ -- Mark Janssen -- maniac(at)maniac.nl -- GnuPG Key Id: 357D2178 Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT Maniac.nl Unix-God.Net|Org MarkJanssen.org|nl SyConOS.com|nl
Re: dns records
On Sun, 2003-04-06 at 20:03, Markus Welsch wrote: i have a few questions regarding dns records for using in a mysql db.the current layout looks like this: [snip] typeA CNAME MX NS PTR SOA Well there are a few more... 'TXT' for text records, for ipv6 A records... there are probably more, check the RFC's... -- Mark Janssen -- maniac(at)maniac.nl -- GnuPG Key Id: 357D2178 Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT Maniac.nl Unix-God.Net|Org MarkJanssen.org|nl SyConOS.com|nl
Re: How to pass in a password to the ssh command line client?
On Wed, 2002-12-25 at 19:37, Fraser Campbell wrote: On December 25, 2002 12:38 pm, the fabulous Mariano Kamp wrote: I am using eclipse (http://eclipse.org) to access a cvs repository by using ext:. The problem is that it asks for the ssh password on the command line. Anything I can do to pass it in automatically? Can you not use an ssh key without a passphrase? Even better, use a key with a passphrase, but run the ssh-agent -- Mark Janssen [EMAIL PROTECTED] Saiko Internet Technologies -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: incoming request proxying
On Tue, 2002-11-12 at 12:09, Paul Johnson wrote: Is there a way to make either Apache or Squid (preferrably Squid, but I can go either way here) proxy requests from the outside world to machines that are inside a network inaccessable to the outside world? Like, say, requests to /whatever go to host/whatever, where host is unreachable outside. This is called reverse-proxying, and is possible with the apache-proxying module. You should be able to find all documentation on the apache website (http://httpd.apache.org/docs) I've had this working a long time ago on some company servers, but I can't access those at the moment to copy/paste the correct rules to you. -- Mark Janssen -- maniac(at)maniac.nl -- GnuPG Key Id: 357D2178 Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT Maniac.nl Unix-God.Net|Org MarkJanssen.org|nl SyConOS.com|nl -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: incoming request proxying
On Tue, 2002-11-12 at 12:09, Paul Johnson wrote: Is there a way to make either Apache or Squid (preferrably Squid, but I can go either way here) proxy requests from the outside world to machines that are inside a network inaccessable to the outside world? Like, say, requests to /whatever go to host/whatever, where host is unreachable outside. This is called reverse-proxying, and is possible with the apache-proxying module. You should be able to find all documentation on the apache website (http://httpd.apache.org/docs) I've had this working a long time ago on some company servers, but I can't access those at the moment to copy/paste the correct rules to you. -- Mark Janssen -- maniac(at)maniac.nl -- GnuPG Key Id: 357D2178 Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT Maniac.nl Unix-God.Net|Org MarkJanssen.org|nl SyConOS.com|nl
Re: [Help] Maildir with Quota
On Fri, 2002-09-27 at 07:38, axacheng wrote: Hell List : I have a directory named /home restricted to HD space by quotatools2. NOW,i need use quota to restrict my user's Maildir ONLY and other directory DON'T restricted by quota such as One wat is probably to create a seperate partition to store all the Maildirs on, and putting quota's on there. Then symlink all the user's maildirs to the new location. I don't use this method myself, since I store the maildirs on a non-shell server that has quota support built into the imap/pop server. (Courier) -- Mark Janssen -- maniac(at)maniac.nl -- GnuPG Key Id: 357D2178 Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT Maniac.nl Unix-God.Net|Org MarkJanssen.org|nl SyConOS.com|nl -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [Help] Maildir with Quota
On Fri, 2002-09-27 at 07:38, axacheng wrote: Hell List : I have a directory named /home restricted to HD space by quotatools2. NOW,i need use quota to restrict my user's Maildir ONLY and other directory DON'T restricted by quota such as One wat is probably to create a seperate partition to store all the Maildirs on, and putting quota's on there. Then symlink all the user's maildirs to the new location. I don't use this method myself, since I store the maildirs on a non-shell server that has quota support built into the imap/pop server. (Courier) -- Mark Janssen -- maniac(at)maniac.nl -- GnuPG Key Id: 357D2178 Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT Maniac.nl Unix-God.Net|Org MarkJanssen.org|nl SyConOS.com|nl
Re: chrooted sftp users?
On Fri, 2002-08-30 at 14:32, Peter Van Eynde wrote: We want to upgrade those people to ssh, or better sftp. One feature of proftpd we are missing is to chroot each user in their own tree, so they can see only their file and cannot escape. How can we get this? It used to work, but since priv-sep was included in openssh the regular chrooting code doesn't work anymore for non-root users. You could (if you dare) run openssh 3.1 and add the chroot patch to it. Then you can chroot sftp users. -- Mark Janssen -- maniac(at)maniac.nl -- GnuPG Key Id: 357D2178 Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT Maniac.nl Unix-God.Net|Org MarkJanssen.org|nl SyConOS.com|nl
Re: MLM solution?
On Mon, 2002-07-08 at 21:17, Peter Hicks wrote: On Mon, Jul 08, 2002 at 05:22:00PM +0200, Thomas -Balu- Walter wrote: Mailinglistmanager that supports - virtual hosts (and different setups for each) - translation / customization of all automatic generated messages - Newsletter-style setups - automatic handling of bounces - administrative web-pages (for the customers) - .deb :) I have had good results from sympa. It meets all of your requirements, plus you have the option of keeping your information in postgresql. I'm also quite happy with courier-mlm :) does all of the above as well... -- Mark Janssen -- maniac(at)maniac.nl -- GnuPG Key Id: 357D2178 Unix / Linux, Open-Source and Internet Consultant SyConOS IT Maniac.nl Unix-God.Net|Org MarkJanssen.org|nl SyConOS.com|nl signature.asc Description: This is a digitally signed message part
Re: MLM solution?
On Mon, 2002-07-08 at 21:17, Peter Hicks wrote: On Mon, Jul 08, 2002 at 05:22:00PM +0200, Thomas -Balu- Walter wrote: Mailinglistmanager that supports - virtual hosts (and different setups for each) - translation / customization of all automatic generated messages - Newsletter-style setups - automatic handling of bounces - administrative web-pages (for the customers) - .deb :) I have had good results from sympa. It meets all of your requirements, plus you have the option of keeping your information in postgresql. I'm also quite happy with courier-mlm :) does all of the above as well... -- Mark Janssen -- maniac(at)maniac.nl -- GnuPG Key Id: 357D2178 Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT Maniac.nl Unix-God.Net|Org MarkJanssen.org|nl SyConOS.com|nl signature.asc Description: This is a digitally signed message part
OpenSSH 3.4 released... should FIX problems
Head over to OpenSSH.com They have just released version 3.4, which should fix some overflow problems and adds lot's of new checks against dubious input. Advisories and updates on the various pages there. Mark Janssen Syconos IT Consultancy -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: SOT: reiserfs enabled netinst image?
On Tue, 2002-05-07 at 17:12, Kevin J. Menard, Jr. wrote: I used to have one of these images, but the CD is scratched beyond repair now, and the host I used to get it from is no longer serving the file. I've been searching in vain for the past week now, and I just wanted to know if any of you know where I can grab this ISO image. I found it grossly useful, and wish to call upon its services again :) I don't know if this is what you are looking for, but i'm using this image, it's a 185 MB (mini-cd) image with e2fs, e3fs and reiser support, along with kernel 2.4 and vesafb support :) http://www.phy.olemiss.edu/debian-cd/ Best of all... it's rsyncable and updated regularly... -- Mark Janssen -- maniac(at)maniac.nl -- GnuPG Key Id: 357D2178 Unix / Linux, Open-Source and Internet Consultant SyConOS IT Maniac.nl Unix-God.Net|Org MarkJanssen.org|nl SyConOS.com|nl signature.asc Description: This is a digitally signed message part
Re: ide hotswap raid fileservers
On Wed, 2002-02-20 at 22:21, Frank Nijenhuis wrote: Is there anyone on this list with experience in setting up large fileservers? ... The mobo has 2 64bits pci slots which are supported by the 3ware cards, the ide hotspare removables have to support udma 100 ..but for now my main question isis this going to work..the setup of an ide raid config with almost a terabyte in storage in raidconfig.. anyone anyidea if there are complete solutions for sale on the market based on such configuration? Or are there ppl actuall running this kind of hardware under debian? If you open up a copy of Linux-Journal you'll see an add from raidzone. They've been selling 1 TB IDE-RAID systems for more then a year. ANd the price isn't too bad either (I dunno what your idea adds up to) I've never used their systems (yet) but it seems interesting. Check them out on www.raidzone.com -- Mark Janssen Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT E-mail: mark(at)markjanssen.nl / maniac(at)maniac.nl GnuPG Key Id: 357D2178 Web: Maniac.nl Unix-God.[Net|Org] MarkJanssen.[com|net|org|nl] SyConOS.[com|nl] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: ide hotswap raid fileservers
On Wed, 2002-02-20 at 22:21, Frank Nijenhuis wrote: Is there anyone on this list with experience in setting up large fileservers? ... The mobo has 2 64bits pci slots which are supported by the 3ware cards, the ide hotspare removables have to support udma 100 ..but for now my main question isis this going to work..the setup of an ide raid config with almost a terabyte in storage in raidconfig.. anyone anyidea if there are complete solutions for sale on the market based on such configuration? Or are there ppl actuall running this kind of hardware under debian? If you open up a copy of Linux-Journal you'll see an add from raidzone. They've been selling 1 TB IDE-RAID systems for more then a year. ANd the price isn't too bad either (I dunno what your idea adds up to) I've never used their systems (yet) but it seems interesting. Check them out on www.raidzone.com -- Mark Janssen Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT E-mail: mark(at)markjanssen.nl / maniac(at)maniac.nl GnuPG Key Id: 357D2178 Web: Maniac.nl Unix-God.[Net|Org] MarkJanssen.[com|net|org|nl] SyConOS.[com|nl]
Re: Closest to Debian
On Mon, Jan 28, 2002 at 01:35:43PM +0800, Jason Lim wrote: Of the Linux distributions supported by Promise (at http://support.promise.com/Linux/Default.htm), which is closest to Debian. That is, which requires the least modification to get working with Debian unstable? Why not just use Debian ?? Debian can do anything RedHat / Suse can do, but better... :) Driver support is only a kernel issue, never a distro issue, and it's always handy to compile your own kernels, even if you only use hardware supported directly by the distro kernel. Mark Janssen Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT E-mail: mark(at)markjanssen.nl / maniac(at)maniac.nl GnuPG Key Id: 357D2178 Web: Maniac.nl Unix-God.[Net|Org] MarkJanssen.[com|net|org|nl] SyConOS.[com|nl] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: netscape o cosa ?
On Tue, Jan 08, 2002 at 02:01:29PM -0500, Peter Billson wrote: If you don't like Netscape, try http://www.opera.com [EMAIL PROTECTED] wrote: cosa usate voi per navigare in internet senza problemi ? (e non mi dite lynx perche non supporta ne java ne tutte le altre cose !!!) io ho provato sia netscape che opera e con tutti e due ho problemi nella magior parte dei siti che quindi mi tocca vederli con IE (soto W$) I don't read a word of italian... but you could also try mozilla and my favorite galeon: www.mozilla.org galeon.sf.net -- Mark Janssen Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT E-mail: mark(at)markjanssen.nl / maniac(at)maniac.nl GnuPG Key Id: 357D2178 Web: Maniac.nl Unix-God.[Net|Org] MarkJanssen.[com|net|org|nl] SyConOS.[com|nl] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: netscape o cosa ?
On Tue, Jan 08, 2002 at 02:01:29PM -0500, Peter Billson wrote: If you don't like Netscape, try http://www.opera.com [EMAIL PROTECTED] wrote: cosa usate voi per navigare in internet senza problemi ? (e non mi dite lynx perche non supporta ne java ne tutte le altre cose !!!) io ho provato sia netscape che opera e con tutti e due ho problemi nella magior parte dei siti che quindi mi tocca vederli con IE (soto W$) I don't read a word of italian... but you could also try mozilla and my favorite galeon: www.mozilla.org galeon.sf.net -- Mark Janssen Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT E-mail: mark(at)markjanssen.nl / maniac(at)maniac.nl GnuPG Key Id: 357D2178 Web: Maniac.nl Unix-God.[Net|Org] MarkJanssen.[com|net|org|nl] SyConOS.[com|nl]
Re: long email names
Subject: long email names I have a customer who wants to host his own email server, and he wants to have long email addresses, like firstname.lastname@domain.com , and map it to a local name that is less than 8 chars. What is the best email server to do this kind of mapping? -chris zubrzycki Almost any MTA will do here. I myself am using Sendmail at home, and Courier-mta for the new mailserver I'm building for the office (Where the long names are the actual (virtual) accounts, and there are no short (and real unix system) accounts for mail-users. In sendmail and other mailers you can easily solve this using aliasses. If courier's features set satisfies what you need I suggest you look into it. I've been positively surprised by it (though it's still quite new and 'untested') Mark Janssen Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT E-mail: mark(at)markjanssen.nl / maniac(at)maniac.nl GnuPG Key Id: 357D2178 Web: Maniac.nl Unix-God.[Net|Org] MarkJanssen.[com|net|org|nl] SyConOS.[com|nl] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: long email names
Subject: long email names I have a customer who wants to host his own email server, and he wants to have long email addresses, like firstname.lastname@domain.com , and map it to a local name that is less than 8 chars. What is the best email server to do this kind of mapping? -chris zubrzycki Almost any MTA will do here. I myself am using Sendmail at home, and Courier-mta for the new mailserver I'm building for the office (Where the long names are the actual (virtual) accounts, and there are no short (and real unix system) accounts for mail-users. In sendmail and other mailers you can easily solve this using aliasses. If courier's features set satisfies what you need I suggest you look into it. I've been positively surprised by it (though it's still quite new and 'untested') Mark Janssen Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT E-mail: mark(at)markjanssen.nl / maniac(at)maniac.nl GnuPG Key Id: 357D2178 Web: Maniac.nl Unix-God.[Net|Org] MarkJanssen.[com|net|org|nl] SyConOS.[com|nl]
Re: Install on many machines
On Thu, Dec 27, 2001 at 12:51:52PM +0100, Marcel Hicking wrote: We are talking ~100 (maybe more) servers here. Could anyone hint me to a decent way of handling the setup and later updates? Can I have a bootable Look at FAI: Fully Automated Installer. I haven't used it myself yet (have to get around to doing it) but after you setup a 'install-server' you can install all the other servers by booting from network, floppy or install-cd. The other machines will then automagically get their network-config and do a automatic installation (Partitioning, network setup, package selection and installation). Afterwards you can have all servers kept up to date with a local debian mirror and have them apt-get dist-upgrade from that server. -- Mark Janssen Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT E-mail: mark(at)markjanssen.nl / maniac(at)maniac.nl GnuPG Key Id: 357D2178 Web: Maniac.nl Unix-God.[Net|Org] MarkJanssen.[com|net|org|nl] SyConOS.[com|nl] msg04576/pgp0.pgp Description: PGP signature
Re: Install on many machines
Erm.. I think the URL for FAI was: fai.sourceforge.net Mark Janssen Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT E-mail: mark(at)markjanssen.nl / maniac(at)maniac.nl GnuPG Key Id: 357D2178 Web: Maniac.nl Unix-God.[Net|Org] MarkJanssen.[com|net|org|nl] SyConOS.[com|nl] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Install on many machines
On Thu, Dec 27, 2001 at 12:51:52PM +0100, Marcel Hicking wrote: We are talking ~100 (maybe more) servers here. Could anyone hint me to a decent way of handling the setup and later updates? Can I have a bootable Look at FAI: Fully Automated Installer. I haven't used it myself yet (have to get around to doing it) but after you setup a 'install-server' you can install all the other servers by booting from network, floppy or install-cd. The other machines will then automagically get their network-config and do a automatic installation (Partitioning, network setup, package selection and installation). Afterwards you can have all servers kept up to date with a local debian mirror and have them apt-get dist-upgrade from that server. -- Mark Janssen Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT E-mail: mark(at)markjanssen.nl / maniac(at)maniac.nl GnuPG Key Id: 357D2178 Web: Maniac.nl Unix-God.[Net|Org] MarkJanssen.[com|net|org|nl] SyConOS.[com|nl] pgpxZRY9H5DZL.pgp Description: PGP signature
Re: Install on many machines
Erm.. I think the URL for FAI was: fai.sourceforge.net Mark Janssen Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT E-mail: mark(at)markjanssen.nl / maniac(at)maniac.nl GnuPG Key Id: 357D2178 Web: Maniac.nl Unix-God.[Net|Org] MarkJanssen.[com|net|org|nl] SyConOS.[com|nl]
Re: Virtual Hosting for Email
On Fri, Dec 21, 2001 at 11:01:08PM -0800, Matthew Walkup wrote: [EMAIL PROTECTED]and [EMAIL PROTECTED] should be treated as seperate accounts. AND the account logins should BOTH be just 'webmaster', and the pop server should be able to figure out which user it is by the server-name they are using ie 'mail.client1.com' or 'mail.client2.com'. I dont even want shell access for each user, so another Like the other poster said, this is not possible, and you need your users to specify their entire e-mail address. I'm currently setting something like this up for my own company, and basing it on Courier (www.courier-mta.org). I have the following setup: - Completely virtual accounts for all users (so no accounts for mail users in the regular password file, only in a mail-users-file) - Virtual domains, each their own users/passwords etc - Account info stored in mysql/postgres/gdb-file or textfile - Imap/Pop/Webmail based on the same system with virtual accounts - Support for SSL/TLS in all subsystems (POP3S/IMAPS/Webmail-ssl, esmtp-tls) Setup was quite doable with the on-line documentation and some googling Using the virtual accounts also makes sure the users can never login using ftp/ssh/telnet/whatever, only for pop3/imap/esmtp/webmail (and you can give them separate passwords for each if you want, so when you only give them a pop password they cant use webmail and vice-versa) method of authentication would be best anyways. I have attempted to find some documentation on this, (and Im sure I'll get a lecture for this ;) but I havent found anything that explains it well. 1) Im wondering if this is possible, or what is the next-best solution. 2) Im looking for documentation on this that explains WHY you follow the steps you do, not just how to do it. The courier install docs will help you there... Mark Janssen Unix / Linux, Open-Source and Internet Consultant @ SyConOS IT E-mail: mark(at)markjanssen.nl / maniac(at)maniac.nl GnuPG Key Id: 357D2178 Web: Maniac.nl Unix-God.[Net|Org] MarkJanssen.[com|net|org|nl] SyConOS.[com|nl] pgpGjBEEJp631.pgp Description: PGP signature
Re: KVM via Internet?
On Mon, Jun 25, 2001 at 03:41:26AM +0800, Jason Lim wrote: Hi, I was wondering if you guys know of any cost-effective KVM (remote access/control) solution that can be accessed over the internet? I think you are looking for a RealWeasel 2000 I think it's www.realweasel.com Try it is should do what you like (convert video to text and put it on the serial/network... and put input from serial to keyboard in... It converts to serial... but you can connect the serial to another server or whatever to make it networked... They even have a telnettable demo system so you can try for yerself... -- Mark Janssen Unix Consultant @ SyConOS IT E-mail: [EMAIL PROTECTED] GnuPG Key Id: 357D2178 http: maniac.nl, unix-god.[net|org], markjanssen.[com|net|org|nl] Fax/VoiceMail: +31 84 8757555 Finger for GPG and GeekCode -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: KVM via Internet?
On Mon, Jun 25, 2001 at 03:41:26AM +0800, Jason Lim wrote: Hi, I was wondering if you guys know of any cost-effective KVM (remote access/control) solution that can be accessed over the internet? I think you are looking for a RealWeasel 2000 I think it's www.realweasel.com Try it is should do what you like (convert video to text and put it on the serial/network... and put input from serial to keyboard in... It converts to serial... but you can connect the serial to another server or whatever to make it networked... They even have a telnettable demo system so you can try for yerself... -- Mark Janssen Unix Consultant @ SyConOS IT E-mail: [EMAIL PROTECTED] GnuPG Key Id: 357D2178 http: maniac.nl, unix-god.[net|org], markjanssen.[com|net|org|nl] Fax/VoiceMail: +31 84 8757555 Finger for GPG and GeekCode
Re: putty (Xfree terminal, talk)
On Mon, May 28, 2001 at 04:34:03PM +0200, Marcel Hicking wrote: talk user works fine for us, at least it has been working fine 10 minutes ago ;-) Make sure talk is configured correctly in /etc/inetd.conf If a user has turned his messages off (mesg n) or they are off by default, and he hasn't turned them on, this will not work... Write will always work since it ignores the message setting. Mark Janssen Unix Consultant @ SyConOS IT E-mail: [EMAIL PROTECTED] GnuPG Key Id: 357D2178 http: maniac.nl, unix-god.[net|org], markjanssen.[com|net|org|nl] Fax/VoiceMail: +31 84 8757555 Finger for GPG and GeekCode -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: putty (Xfree terminal, talk)
On Mon, May 28, 2001 at 04:34:03PM +0200, Marcel Hicking wrote: talk user works fine for us, at least it has been working fine 10 minutes ago ;-) Make sure talk is configured correctly in /etc/inetd.conf If a user has turned his messages off (mesg n) or they are off by default, and he hasn't turned them on, this will not work... Write will always work since it ignores the message setting. Mark Janssen Unix Consultant @ SyConOS IT E-mail: [EMAIL PROTECTED] GnuPG Key Id: 357D2178 http: maniac.nl, unix-god.[net|org], markjanssen.[com|net|org|nl] Fax/VoiceMail: +31 84 8757555 Finger for GPG and GeekCode
Multiple PPP Links to the Internet
Hi Debians... I have the following problem. I have 2 connections to the internet. The first (ppp0) is a pptp connection for ADSL connected to eth1 and the second (ppp1) is a ppp connection to a cablemodem connected to a serial port So I have: eth0: Local Lan 192.168.1.x/24 eth1: Lan to ADSL Modem: 10.0.0.0/24 ppp0: pptp over eth1 a.b.c.d/32 (Static IP) ppp1: ppp over serial e.f.g.h/32 (Dynamic) Now I want to use the DSL connection as a default, since it's a lot faster then the cable (yeah... it's a really crappy cable operator) and then use the cable as a backup system for when the ADSL is down (Since the ADSL is really new, and will be down occasionally). How do I setup my routing etc so that I will use ppp0 by default and use ppp1 when ppp0 isn't responding. While I'm at it... does anyone know of a way to keep the SNMP device number for the ppp0 and ppp1 devices at a default setting, they keep changing after every redial of pppd (and then my mrtg barfs up) -- Mark Janssen Unix Consultant @ SyConOS IT E-mail: [EMAIL PROTECTED] GnuPG Key Id: 357D2178 http: maniac.nl, unix-god.[net|org], markjanssen.[com|net|org|nl] Fax/VoiceMail: +31 84 8757555 Finger for GPG and GeekCode PGP signature
Multiple PPP Links to the Internet
Hi Debians... I have the following problem. I have 2 connections to the internet. The first (ppp0) is a pptp connection for ADSL connected to eth1 and the second (ppp1) is a ppp connection to a cablemodem connected to a serial port So I have: eth0: Local Lan 192.168.1.x/24 eth1: Lan to ADSL Modem: 10.0.0.0/24 ppp0: pptp over eth1 a.b.c.d/32 (Static IP) ppp1: ppp over serial e.f.g.h/32 (Dynamic) Now I want to use the DSL connection as a default, since it's a lot faster then the cable (yeah... it's a really crappy cable operator) and then use the cable as a backup system for when the ADSL is down (Since the ADSL is really new, and will be down occasionally). How do I setup my routing etc so that I will use ppp0 by default and use ppp1 when ppp0 isn't responding. While I'm at it... does anyone know of a way to keep the SNMP device number for the ppp0 and ppp1 devices at a default setting, they keep changing after every redial of pppd (and then my mrtg barfs up) -- Mark Janssen Unix Consultant @ SyConOS IT E-mail: [EMAIL PROTECTED] GnuPG Key Id: 357D2178 http: maniac.nl, unix-god.[net|org], markjanssen.[com|net|org|nl] Fax/VoiceMail: +31 84 8757555 Finger for GPG and GeekCode pgpcYYF3xx69P.pgp Description: PGP signature
Re: Performance monitor
On Tue, May 01, 2001 at 07:30:44PM +0200, Marcin Owsiany wrote: I wonder what you guys use as performance monitoring/bottleneck detection software (preferably for a text terminal)? I mean I would like to see some more detailed data than just 'load average' :-) I don't know the LPP (I think) that was mentioned before, but you should also look into using sar (System Accounting and Reporting) It's a (relatively) standard Unix tool for this sort of thing. HP has it standard on HPUX, and I know there is a free Linux version made by someone from 'At-Computing'. It's called atsar I don't know if it's packaged, I think so. Otherwise a search on freshmeat would turn it up. If that fails try contacting At on: www.atcomputing.nl (Even though their company is a direct competitor to mine ;) ) Mark Janssen Unix Consultant @ SyConOS IT E-mail: [EMAIL PROTECTED]GnuPG Key Id: 357D2178 http: markjanssen.homeip.net and markjanssen.[com|net|org|nl] Fax/VoiceMail: +31 84 8757555 Finger for GPG and GeekCode
Re: Changing servers
On Wed, Mar 21, 2001 at 08:34:56AM +, Steve wrote: Hi, I'm about to change a busy server (currently running under RedHat) to a debian server. I'm trying to figure out a way that will cause least mail delays to our customers whilst the dns records propagate (The IP's are going to change for the mail server). In addition to the allready mentioned changing of TTL's for the domain you can also do a regular portforward (of the sendmail port) from the old machine to the new machine untill DNS has updated. Also, I haven't come up with an easy solution for pop mail. Same solution... Mark Janssen Unix Consultant @ SyConOS IT E-mail: [EMAIL PROTECTED]GnuPG Key Id: 357D2178 http: markjanssen.homeip.net and markjanssen.[com|net|org|nl] Fax/VoiceMail: +31 20 8757555 Finger for GPG and GeekCode PGP signature
Re: Changing servers
On Wed, Mar 21, 2001 at 08:34:56AM +, Steve wrote: Hi, I'm about to change a busy server (currently running under RedHat) to a debian server. I'm trying to figure out a way that will cause least mail delays to our customers whilst the dns records propagate (The IP's are going to change for the mail server). In addition to the allready mentioned changing of TTL's for the domain you can also do a regular portforward (of the sendmail port) from the old machine to the new machine untill DNS has updated. Also, I haven't come up with an easy solution for pop mail. Same solution... Mark Janssen Unix Consultant @ SyConOS IT E-mail: [EMAIL PROTECTED]GnuPG Key Id: 357D2178 http: markjanssen.homeip.net and markjanssen.[com|net|org|nl] Fax/VoiceMail: +31 20 8757555 Finger for GPG and GeekCode pgpayu9J4wgTG.pgp Description: PGP signature
Re: Official CD
On Thu, Mar 01, 2001 at 05:30:06PM -0600, Y2KNET wrote: I am trying to make Debian Official CD and followed all the instructions and successfully rsync the iso image. I also loaded boot.exe file and other files on the CD, but it does not boot up and by-pass the CD ROM. I do know know this boot.exe file, but AFAIK the cd images you can download from the debian website are perfectly bootable, I myself have dont this more then once successfully. Is there any source where I can find the step by step instructions after successfull rsync,to load the boot programs on the CD. AFAIK it just rsync/ftp/whatever the iso's over to you, burn the iso's with any program capable of burning ISO's and move the coaster over to another system and then hit the reset button to abolish yet another NT box to install debian on it Any help will be extremely appreciated. Thanks. Vaqar Ahmed Mark Janssen Unix Consultant @ SyConOS IT E-mail: [EMAIL PROTECTED]GnuPG Key Id: 357D2178 http: markjanssen.homeip.net and markjanssen.[com|net|org|nl] Fax/VoiceMail: +31 20 8757555 Finger for GPG and GeekCode PGP signature
Re: Official CD
On Thu, Mar 01, 2001 at 05:30:06PM -0600, Y2KNET wrote: I am trying to make Debian Official CD and followed all the instructions and successfully rsync the iso image. I also loaded boot.exe file and other files on the CD, but it does not boot up and by-pass the CD ROM. I do know know this boot.exe file, but AFAIK the cd images you can download from the debian website are perfectly bootable, I myself have dont this more then once successfully. Is there any source where I can find the step by step instructions after successfull rsync,to load the boot programs on the CD. AFAIK it just rsync/ftp/whatever the iso's over to you, burn the iso's with any program capable of burning ISO's and move the coaster over to another system and then hit the reset button to abolish yet another NT box to install debian on it Any help will be extremely appreciated. Thanks. Vaqar Ahmed Mark Janssen Unix Consultant @ SyConOS IT E-mail: [EMAIL PROTECTED]GnuPG Key Id: 357D2178 http: markjanssen.homeip.net and markjanssen.[com|net|org|nl] Fax/VoiceMail: +31 20 8757555 Finger for GPG and GeekCode pgpW0XngCEqtR.pgp Description: PGP signature
Re: linking devices
On Tue, Feb 13, 2001 at 11:02:06AM +, Kozman Balint wrote: Hi, is there any way to link two (or more) block devices (ex: two hard disks) into one logical block device? I need this to be able to copy a file of 70Gb to a machine which has two disks of 40 Gb. Yes.. You should be able to use the 'md' driver/subsystem to create a big virtual drive across multiple drives. There is only one problem... a 70 Gig file won't fit... since there is a filesize limitation (I think 2GB) So you'd have to split up the file in 2GB parts anyway, and then it's useless to go the hard way with md or lvm Mark Janssen Unix Consultant @ SyConOS IT E-mail: [EMAIL PROTECTED]GnuPG Key Id: 357D2178 http: markjanssen.homeip.net and markjanssen.[com|net|org|nl] Fax/VoiceMail: +31 20 8757555 Finger for GPG and GeekCode PGP signature
Re: linking devices
On Tue, Feb 13, 2001 at 11:02:06AM +, Kozman Balint wrote: Hi, is there any way to link two (or more) block devices (ex: two hard disks) into one logical block device? I need this to be able to copy a file of 70Gb to a machine which has two disks of 40 Gb. Yes.. You should be able to use the 'md' driver/subsystem to create a big virtual drive across multiple drives. There is only one problem... a 70 Gig file won't fit... since there is a filesize limitation (I think 2GB) So you'd have to split up the file in 2GB parts anyway, and then it's useless to go the hard way with md or lvm Mark Janssen Unix Consultant @ SyConOS IT E-mail: [EMAIL PROTECTED]GnuPG Key Id: 357D2178 http: markjanssen.homeip.net and markjanssen.[com|net|org|nl] Fax/VoiceMail: +31 20 8757555 Finger for GPG and GeekCode pgp4dioj17VHf.pgp Description: PGP signature
Re: JetDirect, internal ZipDrive
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Mon, 4 Sep 2000, Kozman Balint wrote: 1. I would like to setup a Debian server for a 50 machines LAN, where there are 6 jetdirect devices. As I know jetdirect works via SMB over TCP/IP fine. Altough I couldn't find any documentation on JetDirect neither in the Samba doc, nor in the Printer HOWTO. Do I need special kernel support for it? Does ever Linux support JetDirect? AFAIK you can just print from lpd to a jetdirect card... you only need to know the ip-number for the jetdirect, and can then add a rlp (remote printer entry) in your /etc/printcap... Samba will then share your printers to the other machines on the lan... but you don't need samba to print to them from unix... thay are lpr compatible... 2. I have an internal Iomega Zip100 IDE-drive. On boot-time at the partition check I get a lost interrupt message, and bootprocess hangs up. I use kernel v2.4.0-test7. Iomega gives support only for kernel v2.2.14 Unfortunately funny win98 works with the same machine (and Zip100) fine. - Thatswhy I don't think it's a hardware problem. Can't help you there... I have the internal scsi... works like a charm... Mark Janssen Unix Consultant Unix Support Nederland / PSInet Netherlands E-mail: [EMAIL PROTECTED]GnuPG Key Id: 357D2178 http: markjanssen.homeip.net www.markjanssen.nl www.maniac.nl Fax/VoiceMail: +31 20 8757555 Finger for GPG and GeekCode -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.2 (GNU/Linux) Comment: For info see http://www.gnupg.org Filter: gpg4pine 4.0 (http://azzie.robotics.net) iD8DBQE5s22Vb6urvDV9IXgRAvrnAJ4t4Qthi3QqBO7g87KijoKYLZBdxwCgto4v vLodZE5sk2w1jbyFws9QBd4= =Brsa -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: JetDirect, internal ZipDrive
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Mon, 4 Sep 2000, Kozman Balint wrote: 1. I would like to setup a Debian server for a 50 machines LAN, where there are 6 jetdirect devices. As I know jetdirect works via SMB over TCP/IP fine. Altough I couldn't find any documentation on JetDirect neither in the Samba doc, nor in the Printer HOWTO. Do I need special kernel support for it? Does ever Linux support JetDirect? AFAIK you can just print from lpd to a jetdirect card... you only need to know the ip-number for the jetdirect, and can then add a rlp (remote printer entry) in your /etc/printcap... Samba will then share your printers to the other machines on the lan... but you don't need samba to print to them from unix... thay are lpr compatible... 2. I have an internal Iomega Zip100 IDE-drive. On boot-time at the partition check I get a lost interrupt message, and bootprocess hangs up. I use kernel v2.4.0-test7. Iomega gives support only for kernel v2.2.14 Unfortunately funny win98 works with the same machine (and Zip100) fine. - Thatswhy I don't think it's a hardware problem. Can't help you there... I have the internal scsi... works like a charm... Mark Janssen Unix Consultant Unix Support Nederland / PSInet Netherlands E-mail: [EMAIL PROTECTED]GnuPG Key Id: 357D2178 http: markjanssen.homeip.net www.markjanssen.nl www.maniac.nl Fax/VoiceMail: +31 20 8757555 Finger for GPG and GeekCode -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.2 (GNU/Linux) Comment: For info see http://www.gnupg.org Filter: gpg4pine 4.0 (http://azzie.robotics.net) iD8DBQE5s22Vb6urvDV9IXgRAvrnAJ4t4Qthi3QqBO7g87KijoKYLZBdxwCgto4v vLodZE5sk2w1jbyFws9QBd4= =Brsa -END PGP SIGNATURE-
Re: browsable Debian source
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thu, 24 Aug 2000, Jeremy C. Reed wrote: Is there any place where the source to all Debian (base install and packages) is browsable on the web? Not as far as I know... but would be handy sometimes yeah... (For example, I don't have /etc/init.d/pcmcia and various other Debian configurations and programs on my Debian boxes and I don't want to install them. But I want an easy way to look at them.) You wouln't have to install em... cd /tmp apt-get source whatever FreeBSD, OpenBSD and NetBSD have their files browsable via the web. I often find it very useful. Now to find someone with lot's of disk and bandwith... and time to maintain it all... Mark Janssen Unix Consultant Unix Support Nederland / PSInet Netherlands E-mail: [EMAIL PROTECTED]GnuPG Key Id: 357D2178 http: markjanssen.homeip.net www.markjanssen.nl www.maniac.nl Fax/VoiceMail: +31 20 8757555 Finger for GPG and GeekCode -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.2 (GNU/Linux) Comment: For info see http://www.gnupg.org Filter: gpg4pine 4.0 (http://azzie.robotics.net) iD8DBQE5paGtb6urvDV9IXgRAsPAAJwK1dKcjb8+pUf9abZo/KhqynjjcACgppjM 4/3Sx/ufFFQX+xOz96DXo+Q= =A1hd -END PGP SIGNATURE-
Re: Problems with my HD
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sun, 28 May 2000, Kevin Blackham wrote: On Sun, May 28, 2000 at 11:08:18PM -0300, Helber wrote: I´m having some phisical problems with my hard drive. How do I transfer all my data from a hd to another. I've done this using tar cvp * outputfile and then extracting the archive to the new, mounted drive. You'll need some temporary space, so I usually just put the outputfile on the new mount. Then you can better use named pipes, then you won't need tempspace mkfifo /tmp/somenamedpipe on newdrive: tar -zxvf /tmp/somenamedpipe and in another shell, while the above is running... on olddrive: tar -zcvf /tmp/somenamedpipe files/dirs you want copied You can also use the tools 'mirrordir' and 'copydir', they are in the same package, and they copy (or copy with delete) one directory tree to another, in a minimal way (Compare timestamps, don't copy if even..) Mark Janssen Unix Consultant Unix Support Nederland / PSInet Netherlands E-mail: [EMAIL PROTECTED]GnuPG Key Id: 357D2178 http: markjanssen.homeip.net www.markjanssen.nl www.maniac.nl -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.1 (GNU/Linux) Comment: For info see http://www.gnupg.org Filter: gpg4pine 4.0 (http://azzie.robotics.net) iD8DBQE5MgDSb6urvDV9IXgRAir8AJ4/u595r8dPIODv5OmW8jG8G5NQfQCguXKU FDTYVpevNWZZHNjfpX//Zig= =DtK3 -END PGP SIGNATURE-