[Elecraft] (no subject)
From: Howard K2HK ho...@hotmail.com Date: June 6, 2014 at 1:30:27 PM Subject:( K3)Can't interface Dx4win to K3 No response from Dx4win reflector so trying K3 reflector again. K3 does not change frequency when using Dx4win 8.05. Simply times out when a spot is selected. It had been working w/o problem. My setup: Win7 computer, native serial port (com1) , P3, Pigknob, Winkeyer. I am using LP bridge for virtual serial ports. All programs respond as normal, i.e.,keying, kkey macro program, K3 utility. However, when selecting a spot on DX spots screen I receive the radio time out, interface disabled. So far as I can tell the DX spot screen updates and all other features function normally. I have tried the cable directly to K3 and with another K3 with similar results. I have also changed serial ports. 73, Howard ..K2HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [Dx4win] FW: Can't interface Dx4win to K3
Bob, Bryan,Thank you for response. Runs normally until I select a spot which should send the info to the K3. I can see updated spots in the spot window. Selecting a spot disables the radio interface. Although it resumes indicating incoming spots. FRUSTRATING. I believe it is independent of the LP Bridge because I have connected a native port #1 straight through to the K3 with same result.Howard k2hkals...@nc.rr.com Date: Fri, 6 Jun 2014 16:32:52 -0400 From: rflytieanth...@frontier.com To: dx4...@mailman.qth.net Subject: Re: [Dx4win] FW: [Elecraft] Can't interface Dx4win to K3 I am using lp bridge and having trouble staying connected to dx4win also. I stay connected just fine until i go split operation and then i get a time out. Maybe it is the lpt bridge. Bob Bob Papa November On 6/6/2014 12:07, Howard K2HK wrote: From: Howard K2HK ho...@hotmail.com Date: June 6, 2014 at 1:30:27 PM Subject:( K3)Can't interface Dx4win to K3 No response from Dx4win reflector so trying once more.K3 does not change frequency when using Dx4win 8.05. Simply times out when a spot is selected. It had been working w/o problem. My setup: Win7 computer, native serial port (com1) , P3, Pigknob, Winkeyer. I am using LP bridge for virtual serial ports. All programs respond as normal, i.e.,keying, kkey macro program, K3 utility. However, when selecting a spot on DX spots screen I receive the radio time out, interface disabled. So far as I can tell the DX spot screen updates and all other features function normally. I have tried the cable directly to K3 and with another K3 with similar results. I have also changed serial ports. 73, Howard ..K2HK __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:dx4...@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:dx4...@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Can't interface Dx4win to K3
On the road Sent from my iPad Begin forwarded message: From: Howard K2HK ho...@hotmail.com Date: June 2, 2014 at 1:30:27 PM Subject:( K3)Can't interface Dx4win to K3 lost control of K3 when using Dx4win 8.05. It had been working w/o problem. My setup: Win7 computer, native serial port (com1) , P3, Pigknob, Winkeyer. I am using LP bridge for virtual serial ports. All programs respond as normal, i.e.,keying, kkey macro program, K3 utility. However, when selecting a spot on DX spots screen I receive the radio time out, interface disabled. So far as I can tell the DX spot screen updates and all other features function normally. I have tried the cable directly to K3 and with another K3 with similar results. I have also changed serial ports. No response from Dx4win reflector so hoping for some help here. Howard ..K2HK __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:dx4...@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] XG3 cable
Conclusion to lost (?) XG3 cable. With the pinout supplied by Dave, G3GJP, and some junk that I had in the shack I was able to make up the XG3 cable. The probable cause of my dilemma and solution was TOO MUCH JUNK in the shack. Think I'll spend the $30 bucks on dinner tonight. Anyone needing the pinout can contact me and I will pass it along. 73 Howard..K2HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] XG3 serial cable
The original post: The serial cable that is shipped with the XG3 has managed to hide itself in my cable jungle. It is clearly not the garden variety serial cable. Can anyone describe it, diagram it or just tell me where I can replace it. I like my last idea best :-).Howard..K2HK Thank you all for the replies. This should help me flush it out or at least replace it. Below the suggestions same as the KX3 if you have one. .bill nr4c the cable should be like very few you might have.. one end has a 3.5mm TRS plug.. and the other has a 9-pin female D connector.Elecraft carries them as a stock item... $30 plus shipping. That's if you have the RS-232 version. Otherwise, the 9-pin is replaced with a USB A connector (the flat one) Ray,K2ULR Look on page 30 of your owners manual. The schematic for the cable is there.My ops manual is Rev D.I guess you could get a replacement from Elecraft. There is more cableconnector (power) info on Page 7 of the manual.Rick W7KLG DB9-F at one end, 3.5mm TRS male at the other. The K144XV and KX3cables are identical.Matt, k6nia Or use a cable from another Elecraft piece like the KX3 etc.K9yeq..Bill I hold the supreme ranking worldwide for Cable Unfindable as i have so many of them so frightened that they cringe in fear when i yell out to them to announce their whereabouts. Elecraft have them of course. They look like a stereo plug on one end with a USB plug on the other end. To assist you in locating it, elecraft thoughtfully supply black ones.Gary..VK1zz _ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] XG3 serial cable
The serial cable that is shipped with the XG3 has managed to hide itself in my cable jungle. It is clearly not the garden variety serial cable. Can anyone describe it, diagram it or just tell me where I can replace it. I like my last idea best :-).Howard..K2HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [KAT500] Remote Installation
What type of container is it that houses the setup?Howard..K2HK Date: Mon, 15 Apr 2013 10:56:22 -0700 From: ab...@arrl.net To: elecraft@mailman.qth.net Subject: Re: [Elecraft] [KAT500] Remote Installation Hi, Sure, the wireless connection is using a Lantronix WiFi serial server. I think they have only model, but I don't have the model number in my head. I'll look it up when I get home. It supports two serial ports as you can see in the pictures. Note that the serial connection over the Lantronix and is my sole control of the box (other than disconnecting the extension cord for power). No Aux bus. I don't find this terribly limiting. Maybe somebody can find a way to make a bridge between the Aux bus and a serial port. The shiny box contains a homemade duplexer with a split frequency of 10MHz. It is currently used to feed an 80m and a 15m antenna from port 3 (the common port is on the back of the box and you can see the port 3 cable looping around to the back). It's working very nicely. Knut - AB2TC ate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 versatility
But how about operating remote? Howard..K2HK From: n...@elecraft.com To: dstratt...@triad.rr.com Date: Mon, 12 Mar 2012 14:01:56 -0700 CC: elecraft@mailman.qth.net Subject: Re: [Elecraft] KX3 versatility Couldn't have said it better myself :) Thanks-- Wayne N6KR On Mar 12, 2012, at 1:45 PM, David Stratton wrote: I think the versatility of the KX3 is its best-selling point. It can work as a complete base station radio with or without the 100 watt amp. It can be used in the car with its own batteries or connected to the car power jack (with both + and - fused). It can be used while taking a walk or taking a vacation. It can be thrown into a briefcase when you go on a business trip. It can be taken with you to a nursing home or to an assisted living facility. It can be taken to Field Day and run off solar power. It can be taken with you while you're waiting in the car for your wife to do her shopping - how long does that take? It can be used in all these situations and more yet not sacrifice any features you may want or need at any time. You may not be able to have an antenna to transmit in all these cases but you can always connect a length of wire and listen. Many hams have multiple radios for different purposes, but most of us can't afford to do that. So for those who can only afford one radio and so needs it to serve them in many different ways, the KX3 would seem to be just the radio they need to have. Dave - KO4KL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 Loss of main audio when sub turned on
My main RX looses audio when I turn on the sub rx. Before ripping things apart I wonder if I am neglecting some simple setting. Howard..K2HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Loss of main audio when sub turned on
Thank you Gary. You hit it. Mix was bb. Glad you were listening :-) 73,Howard..K2HK From: g...@isect.com Subject: Re: [Elecraft] K3 Loss of main audio when sub turned on Do you have the audio balance control set 100% to sub instead of, say, 50/50 sum main? Or the config setting on b--MIX--b instead of A--MIX-b? BTDT! 73 Gary ZL2iFB Subject: [Elecraft] K3 Loss of main audio when sub turned on My main RX looses audio when I turn on the sub rx. Before ripping things apart I wonder if I am neglecting some simple setting. Howard..K2HK __ : http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] UPS Shipping options not available?
UPS was hacked over the weekend and still off-line. Not sure if this is a cause. Howard..K2HK From: k4...@me.com Date: Mon, 5 Sep 2011 10:39:18 -0400 To: elecraft@mailman.qth.net Subject: [Elecraft] UPS Shipping options not available? Happy Labor Day! In anticipation of the upcoming price increases, I thought I'd add a P3 to my K3 (#3497), but the order form will not accept any UPS options. It readily accepts and of the postal service options. Am I the only one having this problem? 73 Tom K4AEN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] possible cataclysmic blow to amateur radio
Is the following an urban legend or has it some validity? I do not subscribe to CQ mag so can not confirm its appearance there. If true it would be a cataclysmic blow to amateur radio. Fellow Amateur Radio Operators, If you don't subscribe to CQ magazine, in the April Issue (pg 28) is an article that is a bit disturbing. The article was written by Professor Emil Heisseluft who is currently in Geneva, Switzerland, consulting with his European colleagues at the Large Hadron Collider on his specialty, the Higgs bosom. Professor Heisseluft obtained this information while on a trip to Washington, DC and the halls of congress. I will give you a short recap. Draconian cuts in the federal budget for FY2012 portend significant staffing cuts in the FCC that will drastically impact the Amateur Radio and Amateur Satellite Services. Among other things, operators using the 160-6 meter bands will be limited to operating on odd or even days of the week, depending on the numeral in their callsign. If the number is even you get even numbered days and odd, odd number days. New-issue vanity callsigns will become a thing of the past along with special event callsigns. The wait time for reissuance of a callsign for a Silent Key will be extended from two to five years. This will be imposed without the usual Notice of Proposed Rule Making because of the emergency nature of the matter. Interesting. When this goes into effect I would not be able to talk to another Ham Radio Operator in the U.S. with an odd callsign. Emergency communications on HF would become a problem along with HF net activities. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Possible cataclysmic event to amateur radio
Sorry for the panic lads. Wasn't thinking April in June. Just appeared in a local radio club bulletin. Back to scratching out new rumors __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 with Microham Keyer 2
Hi Chris, I may be one of the least qualified to answer ur question but having recently done that I thought I would let you know it was a piece of cake. They go together like toast and jam ( you see what I have on my mind these days). Depending on ur logging program there are variations but all is explained very clearly in the help files. My station is of medium complexity with some switching that is unique to my situation. With a lot of thought and help from memebers of the Microham reflector it went together veery well. You mention the Virtual ports. That is an area that has been problematical for me in the past and was of some concern before I started. It turned out to be extremely easy with no problems at all. If you have further questions the MH reflector may be a good source, http://groups.yahoo.com/group/microHAM. GL, Howard..K2HK From: sem...@semaos.plus.com To: elecraft@mailman.qth.net Subject: [Elecraft] K3 with Microham Keyer 2 I need to interface my K3 with a Microham Keyer 2 does anyone know of any issues that I am likely to come up against? e.g. Virtual Ports, sound card etc. Look forward to your advice keep it simple for me though please, I am not the most computer or technically minded being. Happy new year to you all. -- Regards from Chris Soames *G0TZZ* __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 wish list
I assume Alan monitors the reflector :-). Hope he is sufficiently interested. Howard..K2HK Smith's: Agreed, I concur with you. I don't need any more boxes on my desk either, especially when a button on the Menu could turn off the RS-232 'mute' control.. seems like a pretty easy thing to do to me. Just thought that I would give you a work around for the time being. Be sure to send your ideas to Alan.. he's the only one that can program it into the P3 From: k...@arrl.net To: elecraft@mailman.qth.net Date: Thu, 18 Nov 2010 02:53:31 + Subject: Re: [Elecraft] P3 wish list That's an easy fix. But I have so many boxes on my desktop and it would seem more natural to me to be incorporated into the P3. Doesn't seem like it would be a major project. Howard..K2HK Smith's wrote: you could always use an A/B serial box and just switch to B when you want to do your testing. That's an easy up front solution if they don't add that ability for you. From: k...@arrl.net To: elecraft@mailman.qth.net Date: Thu, 18 Nov 2010 02:26:25 + Subject: [Elecraft] P3 wish list I found checking and adjusting the K3 output on the P3 a useful function. Would it be difficult to make it a front panel function w/o the need to reach in the back and remove the RS232 cable? Howard..K2HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 wish list
Alan, Thank you for considering it. I do think it may have value beyond equalization, eg. signal width, etc. I can understand your reluctance as you describe the pitfalls. I certainly wouldn't feel bad about waiting for a better implementation. Possibly after the effects of your turkey dinner wears off it will be replaced with a new energy to update:-). Kudos for the very nice job you all have done so far. I didn't jump right in on this one because I didn't think it of sufficient value for me but I am very pleasantly surprised at the result. An excellent station accessory. 73 and Happy Thanksgiving to all, Howard..K2HK Unless you change microphones or operators, transmit audio equalization should be pretty much a set and forget type calibration. I'm a little nervous about making this an official feature, because the signal level is not well-controlled. It depends on stray leakage through a balanced mixer and blow-by past a couple of PIN diode switches. If the mixer in a particular K3 happens to be very well balanced or the PIN diodes have extra-low capacitance, there may not be enough signal level to adjust the equalizer properly. It also depends on frequency band and transmit power level. There may be a better way to do this. It's on my list of things to look at as soon as I get time. Alan N1AL On Fri, 2010-11-19 at 06:17 +1000, Gary Gregory wrote: I would like to be able to 'switch' such a feature On/Off without any external 'box' As I am operating portable all the time there is a need for me to check this daily. YMMV Gary On Thu, Nov 18, 2010 at 11:10 PM, Howard K2HK k...@arrl.net wrote: I assume Alan monitors the reflector :-). Hope he is sufficiently interested. Howard..K2HK Smith's: Agreed, I concur with you. I don't need any more boxes on my desk either, especially when a button on the Menu could turn off the RS-232 'mute' control.. seems like a pretty easy thing to do to me. Just thought that I would give you a work around for the time being. Be sure to send your ideas to Alan.. he's the only one that can program it into the P3 From: k...@arrl.net To: elecraft@mailman.qth.net Date: Thu, 18 Nov 2010 02:53:31 + Subject: Re: [Elecraft] P3 wish list That's an easy fix. But I have so many boxes on my desktop and it would seem more natural to me to be incorporated into the P3. Doesn't seem like it would be a major project. Howard..K2HK Smith's wrote: you could always use an A/B serial box and just switch to B when you want to do your testing. That's an easy up front solution if they don't add that ability for you. From: k...@arrl.net To: elecraft@mailman.qth.net Date: Thu, 18 Nov 2010 02:26:25 + Subject: [Elecraft] P3 wish list I found checking and adjusting the K3 output on the P3 a useful function. Would it be difficult to make it a front panel function w/o the need to reach in the back and remove the RS232 cable? Howard..K2HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] P3 wish list
I found checking and adjusting the K3 output on the P3 a useful function. Would it be difficult to make it a front panel function w/o the need to reach in the back and remove the RS232 cable? Howard..K2HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 wish list
That's an easy fix. But I have so many boxes on my desktop and it would seem more natural to me to be incorporated into the P3. Doesn't seem like it would be a major project. Howard..K2HK Smith's wrote: you could always use an A/B serial box and just switch to B when you want to do your testing. That's an easy up front solution if they don't add that ability for you. From: k...@arrl.net To: elecraft@mailman.qth.net Date: Thu, 18 Nov 2010 02:26:25 + Subject: [Elecraft] P3 wish list I found checking and adjusting the K3 output on the P3 a useful function. Would it be difficult to make it a front panel function w/o the need to reach in the back and remove the RS232 cable? Howard..K2HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] 4.21 APF impressions
Been playing with the new 4.21 release for a few hours. My impressions of the APC is it is an excellent addition to the CW op's tools. Smoothly boosts the weak signal out of the noise. Thanks to both Elecraft and the reflector members who pushed for this refinement. Although we might get tired of seeing similar posts urging a wanted addition it sure is beneficial when the results are like this one. The only change I note on SSB is that I can turn my gain down to 5~6 with a Yamaha CM500(?) It was previously at ~19. One other note I can't hear any difference if I am using High or Low bias. Checked with monitor and DVR. 73, Howard..K2HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Some Interesting WRTC Statistics
No Rick. Just post contest fatigue. Congrats on a FB job. Howard..K2HK Date: Mon, 19 Jul 2010 20:07:13 -0700 From: rta...@gmail.com Uh, what you said! That's the second time I've translated positions into metal incorrectly. Guess I'm just not the medal type... /Rick On 7/19/10, Bill W4ZV btipp...@alum.mit.edu wrote: Rick Tavan N6XI wrote: The Silver Medal went to N6MJ/KL9A. Oops you may be metal (medal?) dyslexic Rick! :-) N6MJ/KL9A = 3rd = Bronze. 73, Bill Rick Tavan N6XI Truckee, CA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html E-Mail Cleaned by http://mailcleaner.regedanzter.com Sponsored by http://asafesite.com/home __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3..Power Poles and my bad,very bad
I had a very senior moment yesterday related to PowerPoles and could use some help. The power supply that my K3 is powered by has an auxiliary cigar lighter outlet. In the midst of a project (too late at night)I plugged that cable into a similiar PowerPole which turned out to be the cable from another P/S which happens to be a 24 VDC supply.The K3 went dead in a blink. Does not restart. First, any suggestion of where to start looking? Second, although this never happened to me before it is something to be aware of if you have several terminals dangling at your desk. Embarrassing situation! Howard..K2HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3..Power Poles and my bad,very bad
Of course now that the cows have left I tagged the various voltages with colored tape. An easy fix. But still need ideas for getting the K3 up again aside from sending it to Elecraft. Howard..K2HK Date: Mon, 28 Jun 2010 12:35:59 -0400 From: k...@att.net CC: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3..Power Poles and my bad,very bad MY OOPS TOO!! The 48 volt ones here are yel-gry here Of course I spotted that right after hitting send in spite of reading it. 73, Bob K2TK On 6/28/2010 12:19 PM, Bob wrote: OOPS!! Lets see here. Power Poles come in all the standard color codes plus a non standard pink. So: 12 volt cables are brn-red 5 volt cables are pink-grn 24 volt cables are red-yel 48 volt cables are red-gry Works for me 73, Bob K2TK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] ELECRAFT TO TOKYO HY-POWER 2.5
I use similar arrangement. I follow K3 recommendation of no ALC which is contrary to advice I received from THP. When using THP parameters I had problems. Been ALC free 1yr plus. Howard..K2HK From: dpsa...@tx.rr.com To: elecraft@mailman.qth.net Date: Fri, 28 May 2010 10:55:54 -0500 Subject: Re: [Elecraft] ELECRAFT TO TOKYO HY-POWER 2.5 The THP2.5 uses a regular 15-pin D-connector, whereas the K3 uses the 15-pin HD D-connector. Nothing special needs to be done, other than finding the pin outs from the manuals. The THP 2.5 even has pull-up resistors so early K3 radios will drive the band data input just fine (NOT the case with the THP 1.5, where you need the K3 pull-up mod). If you plan on using ALC, you do need the K3 negative-going ALC mod if you have an early K3. Phil - AD5X __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] multi port usb hub and k3 KUSB
Gary, Not exactly ur situation but I have done it with a desktop. I do recommend a hub with its own power supply. They are priced inexpensively. Howard..K2HK Date: Tue, 20 Apr 2010 15:26:51 -0700 From: gdsla...@yahoo.com To: elecraft@mailman.qth.net Subject: [Elecraft] multi port usb hub and k3 KUSB Hi guys, I've got my new k3 hooked to the laptop using the KUSB and it worked FB first time but, I'm going to be out of usb ports. I've got 2 ports. I'd like to use the KUSB to the k3, a USB Winkey keyer and also a USB mouse and who knows what down the road. Has anyone used some kind of a usb hub to hook multiple devices to the laptop simultaneously? Thanks for any help. Gary/N0SXX This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 Blanking Noise Blanker is blanking everything
When using the NB, if the IF blanker is enabled at any setting, I lose most of the signal. The DSP blanker works as expected. What should I check? Howard..K2HK HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 Noise Blanker
When using the NB, if the IF blanker is enabled at any setting, I lose most of the signal. The DSP blanker works as expected. What should I check? Howard..K2HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Cable for THP HL-2.5Kfx
Bill, Array Solutions has them. I use that combo here. Howard..K2HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 auxillary rf input problem
When I apply a sig gen to the main antenna I get an S9 signal. Switching in the Sub RX I get S9 from both Sub and Main RX. Now if I move the sig gen to the auxillary RF input and switch to RX antenna I get a barely perceptible signal from the Sub RX. Any ideas? Howard..K2HK . HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K3] NEW: K3 Front Panel Switch Customization
I especially like the Cleanup Macro but have added the step to return the bandwidth to normal by adding SWH58; Now looks like: FT0;RT0;XT0;LN0;SB0;SWH58; Howard..K2HK HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Upgrades
Lee wrote: I see it is being recommended for K3 owners to upgrade to the latest beta firmware. I have always waited for the regular releases. There has been a plethora of changes since the last regular release in early May. It would be nice if all the stable items in these betas were incorporated into a regular release so those of us not interested in being beta testers could catch up to some degree. 73, Lee (K9CM) K2HK: I hope the Betas never end. Each one is an improvement over the previous in most cases. I get a better radio each time with a minimum of incovenience and cost and no risk. The radio is unquestionably better now for me than the radio I began with and that was pretty good. Generally there are options in the config menu that turn features on and off and as said before you can always bail out and return to a previous version. So far as the complexity of downloading I agree it might be easier but hardly a brain teaser after you have done it a few times. Let the Beta roll on Howard..K2HK HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Elecraft Digest, Vol 66, Issue 23
On Fri, Oct 16, 2009 at 11:21 AM, Joe Subich, W4TV-4 (via Nabble) ml-user+154617-66613...@n2.nabble.comml-user%2b154617-66613788@n2.nabble.com wrote: SO2R-in-a-box will probably require that the subreceiver use the 2nd antenna jack on the KAT3 (or a yet to be designed antenna switch) in order to be compatible with conventional BPF, antenna switching and amplifier configurations. In that case it will be limited by the isolation in the KAT3. The alternative is to use the subreceiver and Aux Ant jack with AB logic for transmitting. That case will require an entirely new band decoding/BPF/antenna switching topology - one that supports TX/RX/RX switching (which happens to be on of the features of microHAM Station Master Deluxe whenever it is finally available) and an understanding that the transmit radio will always be in the left ear (e.g. will move with transmit focus). JMHO but I believe true SO2R should wait until there's more real estate on a larger K4 front panel, even if the internal RF issues can be solved in the K3. The K3 already suffers from ergonomic overload and lack of flexibility with antenna selection, audio routing, etc. even when just using diversity in SO1R. True SO2R adds another level of complexity to an already overloaded interface. Given this, I believe there are higher priorities to work on with the K3 and save SO2R for a better human interface in the K4. 73, Bill W4ZV -- Just to way in on this one. I totally agree with Bill. SO2R should be a generation away. Howard..K2HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] External speaker operation-K3
What I have I changed? I can only hear my external speakers when sub is activated. Config settings: speakers=2; phone +speakers = yes. Plugged into rear spkr jack. With plug removed internal speakers work as expected. Howard..K2HK HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Solid state QSK amp to pair with K3
Allan, My Tokyo Hypower interfaces with the K3 like bread and butter. Impressive combo. If you can pull it off it is worth it. Howard..K2HK snip: I am currently using a Tentec Hercules II amp with my K3. I would like to check out options for a solid state amp of 1000W or more and QSK capable. I have a Quadra but it pairs nicely with the MP and I wish to keep it separate from the K3 setup. 73 Allan K7GT HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Problem with EXT ALC
I agree entirely Jim. Don't remember the last time I had an amp that required EXT ALC let alone didn't warn against using it. But this manufacturer strongly recommends it and cautions against not using it. I guess I am a believer in follow the manufacturer's recommendation.at least while in warrantee. The amp does have built in protection so perhaps this a case of suspenders and a belt. Howard..K2HK Jim Brown, K9YC wrote: It is VERY rare for a modern power amp to REQUIRE ALC. The proper way to drive an amp is to use the transceiver's power control to set the drive level sufficient to get the desired output from the amplifier. ALC should be used only as a safety to protect the amplifier in those conditions when something goes wrong -- perhaps an antenna or antenna tuner fails, the feedline shorts, etc. What do I mean by modern power amp? Well, the manuals for my Ten Tec tube and solid state amps, written in the early 80's, specifically state that their ALC function should not be used to set the drive power, but that the method I described is the right way to do it. With many power amps, using ALC to set the drive power will generate clicks and other trash. 73, Jim Brown K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] ext Alc
Don, Thank you for your advice. I never pass up a post that has your signature because I know I will learn something. I appreciate your sharing your knowledge with your fellow amateurs. I have been in touch with the factory...actually they have been in touch with me. They don't miss much. Unfortunately it means taking the radio out of line which requires time that is hard to come by these days. I'll get to it and post my result when done. 73, Howard...K2HK Don wrote: Howard, You are correct, with nothing connected to the K3 EXT ALC connection, there should be no power reduction for the K3. Yes, you should contact k3supp...@elecraft.com to see if it can be tracked down and corrected. I am sorry that we initially misinterpreted your email to the reflector. 73,Don W3FPR HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] ext ALC problem
I am having a problem with the external ALC. I am trying a new amp that requires ALC feedback. When I set it in the config menu regardless of the value -2 to -8 my output is reduced to 60 watts. As I raise the drive it increases until about 60 watts then cuts back. In the tune position which I have set for 15 watts I get only 1-2 watts out. This occurs regardless of whether I am connected to the amplifier or not. The SWR is between 1.2and 1.5. I do have the mod installed. Ideas needed. Howard..K2HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] ext ALC problem
Hi Monty, I was just pointing out that the CX was the same connected to the amp or not. My K3 does put out in excess of 100 watts when ALC is turned off. I did adjust the ALC control on the amp. This had no result on the K3 output, i.e. 60 watts max ALC on, full output 100+ with ALC off. From: mon...@mindspring.com To: k...@arrl.net Subject: Re: [Elecraft] ext ALC problem Date: Thu, 28 May 2009 15:12:55 -0400 Howard - If you are not connected to the amplifier, what is controlling the external ALC input to the K3? Has your K3 ever put out 100 watts? My amp's ALC needed calibration before I could use it. Monty K2DLJ I am having a problem with the external ALC. I am trying a new amp that requires ALC feedback. When I set it in the config menu regardless of the value -2 to -8 my output is reduced to 60 watts. As I raise the drive it increases until about 60 watts then cuts back. In the tune position which I have set for 15 watts I get only 1-2 watts out. This occurs regardless of whether I am connected to the amplifier or not. The SWR is between 1.2and 1.5. I do have the mod installed. Ideas needed. Howard..K2HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] ext ALC problem
Don, The output of the K3 decreases regardless of whether it is attached to amp or not when ALC is turned on. At this point I believe the problem to be in the area of the digital I/O board. If (when) I decide to use the external ALC I will check it out. Howard HK From: w3...@embarqmail.com Howard, It sounds like the ALC voltage coming out of your amplifier is much greater than the K3 ALC input range. The ALC voltage from your amplifier is reducing the K3 power output. I believe the problem is with the amplifier, not the K3. Remove the ALC connection to your amplifier, then using the K3 power control, slowly increase the drive to your amplifier while measuring the voltage being developed at the amplifier's ALC output. It should be zero or very close to zero until the amplifier comes near its power limit. If the voltage at the amplifier is in excess of the ALC threshold you have set on the K3, then the K3 will reduce power. In other words, if you want to set the K3 ALC Threshold at -4 volts, adjust the amplifier's ALC circuits to produce -4 volts when the amplifier's power limit is reached. As others have pointed out, attempting to use the amp's ALC output to control the power output of the K3 is bad practice and is likely to produce distorted signals and splatter. 73, Don W3FPR Howard K2HK wrote: I am having a problem with the external ALC. I am trying a new amp that requires ALC feedback. When I set it in the config menu regardless of the value -2 to -8 my output is reduced to 60 watts. As I raise the drive it increases until about 60 watts then cuts back. In the tune position which I have set for 15 watts I get only 1-2 watts out. This occurs regardless of whether I am connected to the amplifier or not. The SWR is between 1.2and 1.5. I do have the mod installed. E-Mail Cleaned by http://mailcleaner.regedanzter.com Free Shopping List Software - http://quickshoppinglist.com Powered by - http://onlineshoppingcheap.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Elecraft's website down
Message: 21 From: Jeff Kinzli N6GQ j...@n6gq.com Subject: Re: [Elecraft] Elecraft's website down? I keep getting I'm in Santa Cruz, and things like telephones (landlines), cell phones, and DSL is down for a lot of people. Even 911 service (!). Sigh. So much for redundancy on the part of the backbone providers, eh? Jeff N6GQ I guess the Supervisors in San Luis Obispo should be made aware of this due to their restricions against amateur transmitters. Howard..K2HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Elecraft's website down
Thanks Ian. I am one of those taken in. Just sent to me today by a trusted friend. Pheww Howard..K2HK HK Date: Fri, 10 Apr 2009 10:54:40 -0700 From: a...@dseven.org To: k...@arrl.net CC: elecraft@mailman.qth.net Subject: Re: [Elecraft] Elecraft's website down Howard K2HK wrote: Message: 21 From: Jeff Kinzli N6GQ j...@n6gq.com Subject: Re: [Elecraft] Elecraft's website down? I keep getting I'm in Santa Cruz, and things like telephones (landlines), cell phones, and DSL is down for a lot of people. Even 911 service (!). Sigh. So much for redundancy on the part of the backbone providers, eh? Jeff N6GQ I guess the Supervisors in San Luis Obispo should be made aware of this due to their restricions against amateur transmitters. Since there was no smiley there (or hi hi), and just to make sure everyone knows, that was an April Fools hoax ... seems quite a few were fooled by it... http://forums.qrz.com/showthread.php?t=199671 ~Iain / N6ML __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Sub vs Split
I'm sure this is obvious to most but not to me. I am blaming it on separation anxiety since my K3 only recent returned from Aptos. I have the KRX3 installed and work split using the Sub Rx. I lock vfo B on the DX and use vfo to find a tx frequency. When might using the split button be indicated? What are the differences? Howard..K2HK HK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Brief loss of RX and TX on startup
Has anyone had this problem? Frequently when I first power up the K3 the display appears but no audio and no TX output. Shutting down and restarting it operates as normal.Howard..K2HK___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Update and another request Lost SSB after KRX3 install..Ideas?
After sending the msg below I removed the KRX3 and also reinstalled the 2.7 filter whose position had been moved on the RF board. Neither of these made any difference. KRX3 works as expected, CW works as usual but..no audio output on SSB. Howard..K2HK HKNo TX audioDate: Sat, 6 Dec 2008 18:12:28 +I recently installed the KRX3 in my K3. At the same time I moved some filters and installed an additional one on the main board . I now have the problem of no audio on SSB. Works FB on CW. I am thinking the culprit is likely to be the 2.7KC filter on the main board. Before opening up things again I thought I would ask for some suggestions.Howard..K2HK HK___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Update and another request Lost SSB after KRX3 install..Ideas?
Thanks for the reply Dick. That's the first thing I checked and I wish that was the problem with it's easy fix. I might also thank you now for the very useful program which I use more often than I anticipated. Luckily this the 160 CW contest weekend. Nothing lost yet but if I don't come up with an answer soon it looks like I will lose lots of time when I return to Aptos. 73, Howard..K2HK HK From: [EMAIL PROTECTED]: [EMAIL PROTECTED]; [EMAIL PROTECTED]: RE: [Elecraft] Update and another request Lost SSB after KRX3 install..Ideas?Date: Sun, 7 Dec 2008 08:03:32 -0800 Have you enabled the 2.7 kHz filter for all modes in receive using the CONFIG FLx menu or the K3 Utility’s Crystal Filter Configuration page? Dick, K6KR From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Howard K2HKSent: Sunday, December 07, 2008 7:33 AMTo: [EMAIL PROTECTED]: [Elecraft] Update and another request Lost SSB after KRX3 install..Ideas? After sending the msg below I removed the KRX3 and also reinstalled the 2.7 filter whose position had been moved on the RF board. Neither of these made any difference. KRX3 works as expected, CW works as usual but..no audio output on SSB. Howard..K2HK HK No TX audioDate: Sat, 6 Dec 2008 18:12:28 +I recently installed the KRX3 in my K3. At the same time I moved some filters and installed an additional one on the main board . I now have the problem of no audio on SSB. Works FB on CW. I am thinking the culprit is likely to be the 2.7KC filter on the main board. Before opening up things again I thought I would ask for some suggestions.Howard..K2HK HK___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Update and another request Lost SSB after KRX3 install..Ideas?
Barry N1EU wrote: Howard..K2HK wrote: After sending the msg below I removed the KRX3 and also reinstalled the 2.7 filter whose position had been moved on the RF board. Neither of these made any difference. KRX3 works as expected, CW works as usual but..no audio output on SSB. Howard..K2HK If the 2.7Khz sub filter is enabled for SSB and CW, are you getting sub audio output in CW at 2.7Khz? Barry N1EU Barry, I'm not sure what the sub audio is? -- View this message in context: http://n2.nabble.com/Update-and-another-request-Lost-SSB-after-KRX3-install..Ideas--tp1625469p1626085.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Update and another request Lost SSB after KRX3 install..Ideas?
Barry N1EU wrote: Howard..K2HK wrote: After sending the msg below I removed the KRX3 and also reinstalled the 2.7 filter whose position had been moved on the RF board. Neither of these made any difference. KRX3 works as expected, CW works as usual but..no audio output on SSB. Howard..K2HK If the 2.7Khz sub filter is enabled for SSB and CW, are you getting sub audio output in CW at 2.7Khz? Barry N1EU CW audio output normal with 2.7k. Good question I hadn't thought about but still no cigar. Howard..K2HK -- View this message in context: http://n2.nabble.com/Update-and-another-request-Lost-SSB-after-KRX3-install..Ideas--tp1625469p1626218.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Lost SSb after KRX3 install.. The end
Found the cause of my lost SSB after much hair pulling. It was not or almost not related to the install. The problem turns out to be in pin 1 in the front mike connector. I rewired the mike for the back connectors and voila audio is working. Too late to open things up tonight for an exact dx and tx but will get it in the AM. Thanks for all the suggestions which allowed me to eliminate several possibilities. This was not expected since I didn't get my big hands in that area. 73, Howard..K2HK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com