Re: [Elecraft] KPA1500 schematic file

[Dr. William J. Schmidt]

That thing just isn't that complicated... I've reverse engineered a lot of it 
having to fix mine a few times...


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 
VP2EHZ

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Pete Smith N4ZR
Sent: Thursday, May 2, 2024 6:50 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA1500 schematic file

Nope, - ridiculous, isn't it?

73, Pete N4ZR

On 5/2/2024 7:36 PM, Jorge Diez - CX6VM wrote:
> Hello
>
> there´s no KPA1500 schematic file available?
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KPAIO3A

[Dr. William J. Schmidt]

Anyone have a spare KPAIO3A board that you are willing to sell?

 

 

Dr. William J. Schmidt - K9HZ J68HZ 

 

email:   <mailto:b...@wjschmidt.com> b...@wjschmidt.com

 

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] WTB: Elecraft K1 Tilt Stand

[Eric J]

I just redesigned one I made for 3D printing. It's very close to the 
original. OK, closer to a blatant knockoff. The only real difference is 
that the design was changed to accommodate the different characteristics 
of 3D printing vs using the original aluminum stock.


If Elecraft has no objections, I will make the files available to anyone 
on the list who wants them. No charge for the files. Email me for 
photos. I don't think I can attach them or include a URL on this reflector.


I tried to find a general email address for Elecraft to get permission, 
but only found sales, technical, etc. So if Wayne sees this let me know 
if it's OK to share the 3DP files.


Eric KE6US

On 11/27/2023 3:51 AM, Jeff Davis wrote:

A long-shot I know, but I'm looking for a KTS1 wide-range tilt stand for an 
Elecraft K1.

Will probably have to find some aftermarket substitute, but thought I'd ask for 
the real thing first.

Thanks!

--
Jeff, KE9V
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to eric_c...@hotmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] TS-890 vs K4D performance?

[Dr. William J. Schmidt]

So, just asking do you ever compare what you buy against a competitor's 
products?  


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 
VP2EHZ

Moderator: North American QRO Group at Groups.IO.
Moderator: Amateur Radio Builders Group at Groups.IO.

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Clay Autery
Sent: Monday, October 23, 2023 1:00 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] TS-890 vs K4D performance?

LMAO!  Yes, because anecdotal story-telling on this list by various 
un/under-qualified people making comments on equipment they cannot even BEGIN 
to understand MUCH LESS operate anywhere near its capabilities.

This is the Elecraft manufacturer's list.  It is here to discuss ELECRAFT gear. 
 Ask Wayne or Eric.  It belongs to THEM.

IF you choose to talk about NON-Elecraft gear, be prepared to field very 
pointed questions about your qualifications and testing methods. Because if you 
are acting a 'fool", it WILL be revealed that you do not know what you don't 
know.

Be well!

Just saying.  there are numerous other venues to discuss your Asian 
crap THIS ain't the place unless you are OK with getting sharpshot until 
you capitulate.

Have a good day.

Clay E. Autery, Jr.
KY5G

On 10/23/2023 11:14 AM, Toast wrote:
> I came to this list to have honest conversations about the comparison of 
> Elecraft equipment vs other manufacturers.  I prefer to live without my head 
> in the sand.
>
> Rob Mantz
> NR4B
>
> Sent from my iPhone
>
>> On Oct 23, 2023, at 11:22 AM, Clay Autery  wrote:
>>
>> I don't come to this list to talk about Kenwood.  Please take your Kenwoo0d 
>> stuff to another list.  Groups.io, etc...
>>
>> Clay E. Autery, Jr.
>> KY5G
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] A dumb question about lightning

[Dr. William J. Schmidt]

Jim's slides give great examples and the msg or either keeping all connections 
at the same potential or completely isolated is all very good advice.

Having dealt with this my entire life in industry though, there is one more 
thing to add.  Lightning strikes are always matters of probability.  If you get 
a DIRECT strike, no bonding etc. is sure to save you with the energy released 
in such a hit.  We are talking possibly hundreds (even thousands) of amps of 
current and very high voltages.  On TWO occasions I have witnessed those 
Square-D Whole House line protectors blow clear out of the breaker box in a 
direct strike into a smoldering pile on the floor.  My take-away from that is 
the only marginally safe place for my expensive radios was as disconnected and 
in the shipping boxed in the (faraday) closet in the basement during a storm 
(just like an airplane).


Dr. William J. Schmidt
email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Jim Brown
Sent: Monday, July 31, 2023 5:25 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] A dumb question about lightning

On 7/31/2023 2:14 PM, jerry wrote:
> Interesting.  Suppose the service entrance is at one end of the house, 
> and the ham shack at the other end?  I don't think it's physically 
> possible to provide a low inductance path that's 60 feet long, is it?

I've posted a link to my tutorial, which covers this, but which folks who need 
to know what's in it haven't bothered to read. Fred is absolutely correct, BY 
LAW, all grounds in a premises MUST be bonded together. In his ARRL book on the 
topic, to which I contributed, Ward Silver, N0AX, recommends a perimeter ground 
ring, connecting multiple driven rods. A full perimeter ring wasn't practical 
for the building that houses my shack, so I did a half perimeter ring from the 
sub-panel for the building to the shack on the other side of the building.

Jerry is entirely correct -- indeed, the rule of thumb for bonding between a 
tower and the building(s) where there's no mains power at the tower is to NOT 
bond if the tower is more than 100 ft from grounds for the building (and some 
references suggest 60 ft).

The whole point of bonding all the grounds is so that in the event of a strike, 
the entire premises rises as closely as practical to the same potential, 
minimizing the potential difference between grounded equipment and surfaces.

Re-posting the link. http://k9yc.com/GroundingAndAudio.pdf  And it's NOT mainly 
about audio.

73, Jim K9YC

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Grounding, Lightning & Attic Antennas

[Dr. William J. Schmidt]

A bigger concern for attic antennas is the use of "radiation shield" plywood on 
the roof of houses build in the last 10 years or so that turn the attic into a 
Faraday cage.  The single most annoying reason cell phones don't work inside 
your houses anymore.


Dr. William J. Schmidt - K9HZ J68HZ 


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Steve L
Sent: Saturday, July 29, 2023 10:42 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Grounding, Lightning & Attic Antennas

Jim & Co.,
I’m reading all the recent posts on the Elecraft reflector concerning lightning 
protection… 

After a recent move, I am working on the design and construction of attic 
antennas for both HF and V/UHF.  The topic of grounding and/or providing 
lightning protection for this installation has baffled me given no outside 
presence of any antenna components.  While not so concerned about a direct 
strike (perhaps naively?) I am concerned about induced currents and resulting 
equipment damage - where clearly disconnection may be the best protection.

Might anyone have any good references for reading/study on grounding 
recommendations, how to’s, best practices, etc. for attic antennas?

Thanks a bunch,

73,
Steve
AA8AF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [OT] A dumb question about lightning

[Dr. William J. Schmidt]

I worked at Honeywell defense systems in the early 80's and I had two guys 
(Ph.D's from MIT) working in the office next to me that were experts in 
Meteorology... specifically the study of lightning.  I would eat lunch with 
them because they were "interesting" to say the least.  When they found out I 
was a ham and asking them about lightning protection they laughed hysterically. 
 Over their tenure they schooled me on my lack of knowledge in their area and 
beat into me immense gravity and consequences of a major lightning strike.  
Imaginable voltages and currents.  You can prepare but you will never be sure.

Static is something else.  All of the antennas I design and implement have 
GROUNDED elements or static chokes to ground to reduce static to a minimum.  
You learn this with experience.


Dr. William J. Schmidt - K9HZ J68HZ 


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Rick NK7I
Sent: Friday, July 28, 2023 4:42 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [OT] A dumb question about lightning

Not often (enough) does a ham have a 100'+ tower either.  

THE standard (of way so many to choose from) is from the cell phone industry 
(Motorola mostly).  It's insanely complex but if you're on a mountain top and 
need 100% reliability; ideal.  The costs, will be a second mortgage so some 
compromises will have to happen.

Here is a better link to the current (newest edition) of the ARRL book; at 
least a good starting point for a baseline understanding.  Direct hits, no 
matter what system/s used, will always show what you missed or didn't do enough 
to mitigate.

https://a.co/d/01vRC1W

Another aspect is static reduction.  That comes from wind, rain, dust, snow, 
anything that passes by the structure.  Shunt all to ground OUTside the 
building is the best approach.  (Base of the tower/mast and again at structure 
entry; make EVERYTHING at the same ground potential, inside and out.  When you 
take a hit, that potential rises, equally if all is done well; it's the 
difference in potential that harms.)

73,
Rick nk7i

On 7/28/2023 2:31 PM, Dr. William J. Schmidt wrote:
> Even the methods in that book are considered sub-standard by the broadcast 
> industry...  The only think that is a sure bet is to completely disconnect 
> your radio and put it back in the shipping box.
>
>
> Dr. William J. Schmidt - K9HZ J68HZ
>
> email:  b...@wjschmidt.com
>
>
> -Original Message-
> From: elecraft-boun...@mailman.qth.net 
> 
> Sent: Friday, July 28, 2023 4:14 PM
> To: j...@kk9a.com
> Cc: Elecraft@mailman.qth.net
> Subject: Re: [Elecraft] [OT] A dumb question about lightning
>
>
> https://www.googleadservices.com/pagead/aclk?sa=L=DChcSEwiOk5PAqLKA
> AxUjEa0GHYmDBJgYABACGgJwdg=2=www.google.com=CAASJORo_AZEA
> zrEwZh7d0CRaunieFV8dsSC3IDZqsPWbucgX_uNKQ=AOD64_1qxgTjvgwY4_QbQuPW
> 5KxSnoObmA=2ahUKEwiEsI3AqLKAAxViAjQIHe9mC-UQ0Qx6BAgOEAE
>
> Welcome to the Bible of grounding.   It’ll take several reads to grasp what 
> you have to do.
>
> 73,
> Rick NK7I
>
>
>> On Jul 28, 2023, at 2:11 PM, j...@kk9a.com wrote:
>>
>> I would recommend that you follow proper lightning bonding/grounding 
>> techniques, these are the only methods that work. My tower has taken 
>> a number of lighting strikes. You cannot prevent a lightning strike.
>> Simply disconnecting your feedling will not prevent damage inside 
>> your house as the voltage from a strike will be induced into your home's 
>> electrical wires.
>>
>> John KK9A
>>
>>
>> Al Lorona W6LX wrote:
>>
>>
>> Please don't laugh at me; I'm a transplant from a region of the 
>> country with essentially no lightning to a region where you have to 
>> worry about it quite a bit.
>>
>> We had a doozy of a storm last night, with lots of lightning overhead.
>> I felt like a sitting duck, even though I had grounded both sides of 
>> the balanced feedline of the antenna, switched the antenna switch to 
>> the middle
>> (grounded) position, and even disconnected the coax leading to the 
>> K3's rear-panel antenna port.
>>
>> Whenever lightning happens, I always wonder if it really is in fact 
>> better to ground everything. Because, doesn't that essentially make a 
>> lightning rod of the antenna? If I simply disconnected the antenna 
>> and left it floating, wouldn't it be less likely to attract a lightning bolt?
>>
>> I'm of the belief that it's better to try to avoid a direct hit than 
>> to attract one and trust your grounding system to do its thing. I'm 
>> of the belief that no grounding system is perfectly effective.
>>
>> Al  W6LX/4
>>
>> __

Re: [Elecraft] [OT] A dumb question about lightning

[Dr. William J. Schmidt]

Even the methods in that book are considered sub-standard by the broadcast 
industry...  The only think that is a sure bet is to completely disconnect your 
radio and put it back in the shipping box.


Dr. William J. Schmidt - K9HZ J68HZ 

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  
Sent: Friday, July 28, 2023 4:14 PM
To: j...@kk9a.com
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] [OT] A dumb question about lightning


https://www.googleadservices.com/pagead/aclk?sa=L=DChcSEwiOk5PAqLKAAxUjEa0GHYmDBJgYABACGgJwdg=2=www.google.com=CAASJORo_AZEAzrEwZh7d0CRaunieFV8dsSC3IDZqsPWbucgX_uNKQ=AOD64_1qxgTjvgwY4_QbQuPW5KxSnoObmA=2ahUKEwiEsI3AqLKAAxViAjQIHe9mC-UQ0Qx6BAgOEAE

Welcome to the Bible of grounding.   It’ll take several reads to grasp what you 
have to do. 

73,
Rick NK7I


> On Jul 28, 2023, at 2:11 PM, j...@kk9a.com wrote:
> 
> I would recommend that you follow proper lightning bonding/grounding 
> techniques, these are the only methods that work. My tower has taken a 
> number of lighting strikes. You cannot prevent a lightning strike. 
> Simply disconnecting your feedling will not prevent damage inside your 
> house as the voltage from a strike will be induced into your home's 
> electrical wires.
> 
> John KK9A
> 
> 
> Al Lorona W6LX wrote:
> 
> 
> Please don't laugh at me; I'm a transplant from a region of the 
> country with essentially no lightning to a region where you have to 
> worry about it quite a bit.
> 
> We had a doozy of a storm last night, with lots of lightning overhead. 
> I felt like a sitting duck, even though I had grounded both sides of 
> the balanced feedline of the antenna, switched the antenna switch to 
> the middle
> (grounded) position, and even disconnected the coax leading to the 
> K3's rear-panel antenna port.
> 
> Whenever lightning happens, I always wonder if it really is in fact 
> better to ground everything. Because, doesn't that essentially make a 
> lightning rod of the antenna? If I simply disconnected the antenna and 
> left it floating, wouldn't it be less likely to attract a lightning bolt?
> 
> I'm of the belief that it's better to try to avoid a direct hit than 
> to attract one and trust your grounding system to do its thing. I'm of 
> the belief that no grounding system is perfectly effective.
> 
> Al  W6LX/4
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> rick.n...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] W-2 Cable Length

[J]

Good Day.  Does the length of the data cable between the W-2 meter and 
its sensor matter?   I would like to use substantially shorter cable 
than came with the kit.  Thanks.   K8JHR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] TL-922

[Dr. William J. Schmidt]

Yes, the K3 can only handle key out of +200 VDC at 5A...


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 
VP2EHZ

Moderator: North American QRO Group at Groups.IO.
Moderator: Amateur Radio Builders Group at Groups.IO.

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of James F. Boehner, MD via Elecraft
Sent: Wednesday, March 29, 2023 6:55 AM
To: 'Josep Torres' ; 'Elecraft Reflector' 

Subject: Re: [Elecraft] TL-922

Josep,

Be sure to install a soft-key interface in the TL-922 before hooking it up to 
the K3.

https://harbachelectronics.com/shop/kenwood-tl-922/sk-922-soft-key-keying-interface/
 

The newer rigs were not meant to handle the voltages on the older amplifier's 
keying circuits.

I modified mine with the soft-key board and added the new capacitor block.

'73 de JIM N2ZZ

-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Josep Torres via Elecraft
Sent: Wednesday, March 29, 2023 3:03 AM
To: Elecraft Reflector 
Subject: [Elecraft] TL-922

Hi guys,

Have a couple of Kenwood TL-922’s around and was thinking to connect one to a 
K3.
Has anybody done so.? And if so, how have you done the wiring.? 
Got 2 K3’s (in fact I have 3 of ‘em, but one not physically at now now) and 
maybe one day I can use the spare one with a TL-922 from another QTH.

Thanks,


73,

Josep
EA6BF
BUG #256  -  CWops #3072  -  FOC #2182 (ex 1724)



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to jboehne...@yahoo.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Using ANTLION MODMIC 4 with Elecraft K3

[Dr. William J. Schmidt]

Same here... it's a requirement at my contest station (to have one) so that we 
don't mess with gains and frequencies due to other mics during a contest when 
the ops change.  Just plug into the back panel "MIC" connector and turn on the 
REAR BIAS.


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 
VP2EHZ



-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of George Fremin III
Sent: Monday, March 13, 2023 8:19 AM
To: w...@w5wz.com
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Using ANTLION MODMIC 4 with Elecraft K3

I plug my mod mic into the back and the pinout is correct using rear panel and 
bias on 


George Fremin III
K5TR

> On Mar 13, 2023, at 6:08 AM, w...@w5wz.com wrote:
> 
> 
> 
> Anyone using an ANTLION MODMIC 4 with an Elecraft K3?
> 
> I'm having difficulty.  The Modmic works great plugged into my PC Mic Input 
> on the front panel.
> 
> I believe the ModMic is electret - requiring BIAS, which I know is turned on 
> at CONFIG > MIC > press #2, so the end result is FP.H BIAS.
> 
> A Heil AD-1-K is plugged into the front panel; however, pin 6 (8v) is not 
> wired to the mono 1/8 mike jack on the adapter.  The Modmic uses a T-R-S 1/8 
> inch.
> 
> What is the correct pinout for the K3 front mic jack to the Modmic?
> 
> --Scott, W5WZ
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> geo...@kkn.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 & KPOD

[hawley, charles j jr]

I've used two KPods connected to the K4 at the same time. The buttons are the 
same of course but the knobs can be VFO A and VFOB which is kind of handy at 
times.

​Chuck Hawley
 c-haw...@illinois.edu

 Amateur Radio, KE9UW
 aka Jack, BMW Motorcycles


From: Ramon Batista 
Sent: Sunday, March 5, 2023 5:20 PM
To: Fred Jensen 
Cc: Elecraft Reflector 
Subject: Re: [Elecraft] K4 & KPOD

Hi Fred, My KPOD is connected to my K4 and K3s, but can use it in one radio
at the time.

On Sun, Mar 5, 2023 at 6:11 PM Fred Jensen  wrote:

> Do I understand the K4 order page correctly that my KPOD currently on my
> K3 will also plug into and work with a K4 ... should I decide to spring
> for one?
>
> 73,
>
> Fred ["Skip"] K6DGW
> Sparks NV DM09dn
> Washoe County
>
>
>
> --
> This email has been checked for viruses by AVG antivirus software.
> https://urldefense.com/v3/__http://www.avg.com__;!!DZ3fjg!59NHZFIm05qi0DhiZ3xbuEtS_uMG6d7ZLaf7Ers_p4nZLJ0h4nxS6rGm57K7xlH06pmkTLndkXP8sGb4MBbCZGfQ5p_-5VpestXYPQ$
> __
> Elecraft mailing list
> Home: 
> https://urldefense.com/v3/__http://mailman.qth.net/mailman/listinfo/elecraft__;!!DZ3fjg!59NHZFIm05qi0DhiZ3xbuEtS_uMG6d7ZLaf7Ers_p4nZLJ0h4nxS6rGm57K7xlH06pmkTLndkXP8sGb4MBbCZGfQ5p_-5VpoF4hqWA$
> Help: 
> https://urldefense.com/v3/__http://mailman.qth.net/mmfaq.htm__;!!DZ3fjg!59NHZFIm05qi0DhiZ3xbuEtS_uMG6d7ZLaf7Ers_p4nZLJ0h4nxS6rGm57K7xlH06pmkTLndkXP8sGb4MBbCZGfQ5p_-5VpaLvo6Qw$
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: 
> https://urldefense.com/v3/__http://www.qsl.net__;!!DZ3fjg!59NHZFIm05qi0DhiZ3xbuEtS_uMG6d7ZLaf7Ers_p4nZLJ0h4nxS6rGm57K7xlH06pmkTLndkXP8sGb4MBbCZGfQ5p_-5VoIkWVHUQ$
> Please help support this email list: 
> https://urldefense.com/v3/__http://www.qsl.net/donate.html__;!!DZ3fjg!59NHZFIm05qi0DhiZ3xbuEtS_uMG6d7ZLaf7Ers_p4nZLJ0h4nxS6rGm57K7xlH06pmkTLndkXP8sGb4MBbCZGfQ5p_-5Vpn5EvZWg$
> Message delivered to wd4x...@gmail.com
>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3- part fell out

[Pentti A J Pajunen]

Yaw!
I have been working with SMD -components. Marking; 3k3 is A 3300 ohm 
(3.3 kOhm) resistor 3.3.ohm resistor is marked 3R3. As I have been 
working as A radio- TV mechanics I sometimes was targeted with A joke. 
"Put an extra component loose somewhwere in an equipment and cause a 
nerval breakdown". Maybe not in this case.


--
73 & CU Penna, OH2G, OH2CG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] Re: [POSSIBLE SPAM] Re: [K3] Odd transmit power output behavior on TX DATA

[Dr. William J. Schmidt]

Replaced the transistors (RD devices)...


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 
VP2EHZ



-Original Message-
From: KJ7SOY  
Sent: Friday, December 30, 2022 11:26 AM
To: b...@wjschmidt.com
Cc: Mark Musick ; aa...@mac.com; Joe Subich, W4TV 
; Elecraft 
Subject: [POSSIBLE SPAM] Re: [Elecraft] [POSSIBLE SPAM] Re: [K3] Odd transmit 
power output behavior on TX DATA



> On Dec 30, 2022, at 9:14 AM, Dr. William J. Schmidt  
> wrote:
> 
> I had this same issue with two of my K3s...  Failed the calibration.   Was
> an issue on the 10W board both cases.
> 
> 
> Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ 
> PJ2/K9HZ VP2EHZ
> 

I’m having a power issue on my K3 and I suspect it may be the 10W board.  Can I 
ask how you resolved the issue please?

Thanks!

73, Adrian
KJ7SOY=

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] Re: [K3] Odd transmit power output behavior on TX DATA

[Dr. William J. Schmidt]

I had this same issue with two of my K3s...  Failed the calibration.   Was
an issue on the 10W board both cases.


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ
VP2EHZ



-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Mark Musick
Sent: Friday, December 30, 2022 11:10 AM
To: aa...@mac.com; Joe Subich, W4TV 
Cc: Elecraft 
Subject: [POSSIBLE SPAM] Re: [Elecraft] [K3] Odd transmit power output
behavior on TX DATA

Bill,
You need to do a TX calibration and see if that solves the problem.
The first thing you should do when you encounter varying power output is do
a TX calibration.
The second thing to check for on digital modes is the audio levels to make
sure they have not changed. They may have been changed inadvertently. Even
if you say to yourself "I haven't changed a thing" check it anyway.
Both of these have solved these kinds of problems for me in the past.

73,
Mark, WB9CIF

-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Bill Coleman via Elecraft
Sent: Friday, December 30, 2022 16:46
To: Joe Subich, W4TV 
Cc: Elecraft 
Subject: Re: [Elecraft] [K3] Odd transmit power output behavior on TX DATA

All bands. 

Power calibration was done about 9 months ago.

> On Dec 30, 2022, at 11:19 AM, Joe Subich, W4TV  wrote:
> 
> 
> One band or all bands?
> 
> Have you done the power calibration routine recently?
> 
> 73,
> 
>   ... Joe, W4TV
> 
> On 2022-12-30 10:34 AM, Bill Coleman via Elecraft wrote:
>> I own two K3/100 radios. One is SN70xx, another SN87xx. On one of them, I
observe an odd behavior with transmit power output.
>> Even though I have an antenna matched to nearly 1:1 VSWR using the
internal tuner, any time I change bands, or adjust the power level, SN70XX
does not put out full power right away. Instead, it starts about 40-50
watts, and then slowly creeps up to 100 watts. This takes about 4-6 15
second FT8 transmissions.
>> It doesn't appear to behave this way on CW or SSB. Only on TX DATA modes.
>> My other radio doesn't exhibit this behavior.
>> The two radios have different internal options, but many of the
configuration parameters are the same.
>> Any suggestions?
>> Bill Coleman, AA4LR, PP-ASELMail: aa...@mac.com
>> Quote: "We invented personal computing."
>>   -- Bill Gates @ TechNet / MSDN 2003
> 
> __
> Elecraft mailing list
> Home: 
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailma
> n.qth.net%2Fmailman%2Flistinfo%2Felecraft=05%7C01%7C%7C151acbbc3b
> df48087d8e08daea85be60%7C84df9e7fe9f640afb435%7C1%7C0%7C63
> 8080157387596431%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV
> 2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=vBAFlaQd4W
> 4uWe5pjG1pCGyCQ2QN6FOx5HAyQu%2FxU4E%3D=0
> Help: 
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailma
> n.qth.net%2Fmmfaq.htm=05%7C01%7C%7C151acbbc3bdf48087d8e08daea85be
> 60%7C84df9e7fe9f640afb435%7C1%7C0%7C638080157387596431%7CU
> nknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1ha
> WwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=Dz4yy7UlV13Uu15tu7O9BEuUXlk7Hf
> obrbZJta0Rrvc%3D=0
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: 
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qs
> l.net%2F=05%7C01%7C%7C151acbbc3bdf48087d8e08daea85be60%7C84df9e7f
> e9f640afb435%7C1%7C0%7C638080157387596431%7CUnknown%7CTWFp
> bGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn
> 0%3D%7C3000%7C%7C%7C=2Yo70t2lPTo93sDO%2BujBO%2BTSmTkkRReDesowT8c
> RUb8%3D=0 Please help support this email list: 
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qs
> l.net%2Fdonate.html=05%7C01%7C%7C151acbbc3bdf48087d8e08daea85be60
> %7C84df9e7fe9f640afb435%7C1%7C0%7C638080157387596431%7CUnk
> nown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWw
> iLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=8iW2cWYfM%2B0kJSCg7kwd8UfnPl8sk9
> E6MrHXbQ8J7hA%3D=0
> Message delivered to aa...@mac.com

__
Elecraft mailing list
Home:
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.
net%2Fmailman%2Flistinfo%2Felecraft=05%7C01%7C%7C151acbbc3bdf48087d8e08
daea85be60%7C84df9e7fe9f640afb435%7C1%7C0%7C638080157387596431%7
CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiL
CJXVCI6Mn0%3D%7C3000%7C%7C%7C=vBAFlaQd4W4uWe5pjG1pCGyCQ2QN6FOx5HAyQu%2
FxU4E%3D=0
Help:
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.
net%2Fmmfaq.htm=05%7C01%7C%7C151acbbc3bdf48087d8e08daea85be60%7C84df9e7
fe9f640afb435

Re: [Elecraft] [K4][K3][K2] FS: David Clark H10-20 Aviation Headset

[Dr. William J. Schmidt]

I have two sets of Bose aviation headsets... the A20 and the Profilght series 
2.  Both are second to none.  Active equalization and noise cancellation... 
perfect for contests/  loud backgrounds.  They also don't fall apart like some 
headsets made specifically for the ham market.  A bit pricy though.


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 
VP2EHZ

Moderator: Amateur Radio Builders Group at Groups.IO.

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of jerry
Sent: Saturday, December 17, 2022 2:49 PM
To: g...@seanet.com
Cc: Elecraft Reflector 
Subject: Re: [Elecraft] [K4][K3][K2] FS: David Clark H10-20 Aviation Headset

Not to mention that pilots call them David "Clamp" Clarks.  Aviation headsets 
in general are not the epitome of comfort.

   Small airplanes are like sitting in a steel garbage can while people pound 
on it with hammers.

 - Jerry, KF6VB

On 2022-12-17 12:33, Gil Drynan wrote:
> I had a problem with a David Clark as it emphases certian frequencies.
> When I was moderating a net on the intertie it would disconnect the 
> link to Scapouse (sp). Had to use a different headset.
> 
> GIL
> 
> W7Gil
> 
> 
>>  Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â  "W3DVX Rescues Legacy Elecrafts"
>> Hello,
>> 
>> For Sale:Â  David Clark H10-20 Aviation Headset
>> 
>> It’s the perfect headset for the ham who uses headphones with a mic 
>> boom attached.
>> 
>> Perfect for use in noisy environments—the cockpit of a 172 is 
>> LOUD—and when you put these on, all is quiet. The microphone 
>> ignores background sound, and you speak close to the mic. It’s an 
>> M-7A electret mic, which does need bias; the K2 needs a 5.6K resistor 
>> (probably already there if you use Elecraft MH2, 4 etc.) Tested with 
>> my K4 with bias turned on.
>> 
>> Photos and more info: Christmas sales at 
>> https://wilcoxengineering.com/2020/06/09/selling-extra-equipment/
>> 
>> Happy Holidays,
>> 
>> Alan
>> 
>> Alan D. Wilcox, W3DVX (K2-5373, K3-40, K4D-384, SKCC 22955)
>> 570-916-9590 (cell, text)
>> https://WilcoxEngineering.com
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net Please help support this 
>> email list: http://www.qsl.net/donate.html Message delivered to 
>> g...@seanet.com
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> je...@tr2.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale - AF1 Audio Filter Kit - Built

[J]

Elecraft AF1 Audio Filter Kit - Built - no case.  As I recall, I built 
it and put it in a plastic bag in the parts closet, so it was tested but 
not used for any length of time.  I believe I have the cables that came 
with it - buyer gets what I have with it.  I will also include the 
instruction manual, if I can find it.   $40 including shipping FOB to US 
or Canadian destination only.  (I am too old and feeble ( i.e., lazy) to 
figure out customs duties and all that foreign shipment jazz.) Sold as 
is, no warranty.   If interested, please contact me off list =    
mycallsign99 at gmail.com    Thanks.   K8JHR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KPA1500 RELIABILITY

[Dr. William J. Schmidt]

My KPA1500 just blew up for the third time... gonna go back again.  Forced
us to run LP in CQWW this weekend as it exploded just two days ahead of the
contest.  No reason for the explosion that I can tell... radio worked fine
on the antenna system without the amp after the explosion.

Previously it went back for:
1.  MeanWell Power Supply failure.  (Hey, it happens).
2.  Blew up the blocking capacitors in the final output circuit (teeny
suckers, no reason for it).

This time I got a hard failure/low gain so figure it's gonna be final
transistors.  Thinking of going back to tube amps because they are much more
forgiving!


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ
VP2EHZ


email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of j...@kk9a.com
Sent: Sunday, October 30, 2022 10:44 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA1500 RELIABILITY

Is there a common component failure with this KPA1500 amp or does something
different break every time?  Is there a certain mode, power level or type of
antenna/feedline that causes failures?  I also monitor the SPE Expert list
and some people have multiple LDMOS failures while others have no issues
ever. N4ZR posted a similar question two months ago when someone else had
multiple LDMOS failures and I did not see any responses. 
http://mailman.qth.net/pipermail/elecraft/2022-August/290628.html

GL,
John KK9A
  

W3AB wrote:

I don't have one but I do have access to one. It is making UPS rich going
back and forth. Is there a reliability issue with these amps?

---
73 de W3AB/GEO


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] k pod repair

[hawley, charles j jr]

Here is a reply I received from Elecraft when I needed a switch. They did send 
me a couple as well.

"Thanks for contacting Elecraft. Apologies for the slow turn time.
The eight switches in a KPOD in question are Elecraft P/N E640062, described as 
" SWITCH,TACT,12mm,SMD".
Our distributor DigiKey calls them
EG4904TR-ND
 . "

​Chuck Hawley
 c-haw...@illinois.edu

 Amateur Radio, KE9UW

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Elecraft K4

[hawley, charles j jr]

Is the 100 watt PA turned off in the menu?
Look at KPA4 PA Option and see...

​Chuck Hawley
 c-haw...@illinois.edu

 Amateur Radio, KE9UW
 aka Jack, BMW Motorcycles
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Subject: Re: [K3] KIO3 failure mode

[Dr. William J. Schmidt]

Lightning seems to me the topic on all of the groups currently... so we must be 
in storm season!

I worked with a guy at Honeywell who was trained in atmospheric discharges in 
his graduate work at MIT.  I guess Honeywell was looking into survival of 
military equipment at the time.  He knew I was a ham and told me I was an idiot 
if I thought I could stop a 30K Amp lightning discharge. He told me the only 
thing that really works is disconnecting the electronics (which we all already 
know).  He also beat into me that damage does not necessarily occur from 
lightning itself, but rather different potentials in all of your entrance 
paths.  So its key to make sure that the phone, cable, power, antennas, rotor 
cables, etc are all tied together so that no matter what, they maintain the 
same potential during a lightning strike (not necessarily to GROUND).  There 
are many ways to do this of course, but there are two very good references to 
follow that basically talk about the same thing.  One was published by Ron 
Block and is only two pages (its out in the SteppIR groups files section).  The 
other is a complete book on commercial installations and lightning proofing 
published by PolyPhaser Corp called “Lightning Protection and Grounding 
Solutions for Communication Sites” , first edition by Ken Rand, copyright 1999. 
 That is copyright so I can't upload it.

Happy reading!

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] [K3] KIO3 failure mode

[Dr. William J. Schmidt]

Reverse engineered or just a better/ more modern design?  

 

 

-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Al Lorona
Sent: Tuesday, August 23, 2022 4:06 PM
To: Elecraft Reflector 
Subject: [POSSIBLE SPAM] [Elecraft] [K3] KIO3 failure mode

 

Ah, lightning. Whoever performs an analysis of the KIO3 failure mode after 
being struck by lightning might have what's necessary for a very lucrative 
business. Actually, I'm surprised that the board hasn't already been reverse 
engineered in China, enabling an aftermarket for KIO3 replacements. I bet 
everybody on this reflector living east of the Rockies would buy two of them in 
anticipation of future thunderstorms. Al  W6LX/4

 

__

Elecraft mailing list

Home:   
http://mailman.qth.net/mailman/listinfo/elecraft

Help:   http://mailman.qth.net/mmfaq.htm

Post:   mailto:Elecraft@mailman.qth.net

 

This list hosted by:   http://www.qsl.net

Please help support this email list:   
http://www.qsl.net/donate.html Message delivered to  
 b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KPA500 Parts

[Dr. William J. Schmidt]

The latest revision of the schematic for the KPA500 TR Switch shows a Zener
diode at the gate of Q4 in place of R3, the 100K resistor previously.  Its
obviously for gate protection.  There are no markings on the schematic what
this diode is although the spec sheet for the IRFSL9N60APBE does say the
gate-source threshold is maximum of 4V.  Anyone know what the value of this
thing is before I just stuff in a 4v Zener?

 

 

Dr. William J. Schmidt - K9HZ J68HZ

 

 

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Growing SWR-long press of tuning button

[Pentti A J Pajunen]

Yaw!
I just wonder. U told using EFHW. Are You sure that the fenomenon 
doesn't cause of the Un-Un in Your antenna warming during tuning signal?


--
73 & CU Pena, OH2G, OH2CG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] Re: KPA500 / 270V ERR

[Dr. William J. Schmidt]

If you check the schematics, the 270V is made/comes from the power supply...
BUT the 60V enable relay (feeds the voltage divider and read on the front
panel) is on the PA board... 

-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Andy Durbin
Sent: Sunday, July 17, 2022 7:35 PM
To: elecraft@mailman.qth.net
Subject: [POSSIBLE SPAM] Re: [Elecraft] KPA500 / 270V ERR

"I think it may actually be the other way around... The 60V relay does not
close if 270V is missing?"

Assume 60 V Enable relay K1 is not closed.  How would 270 V be produced?
The secondary winding of T1 is open circuit.

Andy, k3wyc
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KPA500 / 270V ERR

[Dr. William J. Schmidt]

I think it may actually be the other way around... The 60V relay does not
close if 270V is missing?

-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Andy Durbin
Sent: Sunday, July 17, 2022 6:49 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KPA500 / 270V ERR

HV and 270V are separate power supply rails but, if my read of the schematic
is correct, 270 V depends on 60 V being present.  60 V requires the
interlock switch to be closed.

Diagnosing this may require having the top off and the interlock defeated.
Everyone should evaluate their own competence and risk tolerance.

Andy, k3wyc

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Pignology Remote kit for sale

[hawley, charles j jr]

New never used complete with printed color user manual Shipping included conus 
PayPal only $150 KE9UW
c-haw...@illinois.edu

 Amateur Radio, KE9UW

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] Re: [POSSIBLE SPAM] Common K3 failure modes???

[Dr. William J. Schmidt]

The only opinion here that matters is Wayne's...

-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of David Gilbert
Sent: Wednesday, June 22, 2022 12:35 PM
To: elecraft@mailman.qth.net
Subject: [POSSIBLE SPAM] Re: [Elecraft] [POSSIBLE SPAM] Common K3 failure 
modes???


Well, if Elecraft were to release the parts/specs/boards/gerber files to a 3rd 
party they would relieve themselves of the repair burden they clearly don't 
want, and any jeopardy for repair quality would fall on the 3rd party.  More 
importantly from Elecraft's perspective, it would address the image problem 
they have of leaving customers stranded without a repair path.  When I needed 
my K3IO repaired, Elecraft refused to do it and told me I should just buy the 
USB version ... and of course they no longer even offer that. None of which has 
anything to do with component obsolescence, by the way.  The key parts listed 
on the schematics are all still readily available, but of course replacing them 
can be problematic due to their small size.

As I've said before, the advantage of a modular design is nonexistent if the 
modules don't exist.

Some people have suggested buying a complete spare rig for parts.  I think 
that's ridiculous.  If I'm going to put out that much money for contingency 
purposes I'll buy a new rig from a company that didn't put me in that situation.

I hope you indeed consider offering a replacement K3IO board.  I'd probably buy 
one as a spare.

73,
Dave   AB7E



On 6/22/2022 9:40 AM, Dr. William J. Schmidt wrote:
> I actually designed and build a K3IO "ethernet" replacement KIO3 
> board...before the USB version was available.   I probably have the only 
> "ethernet" K3 on earth.   I may revive that card and replace the ethernet 
> stuff with USB parts so that I can fix some of these K3's laying around.  I 
> think there is ZERO chance that Elecraft will release parts/ boards/ gerbers 
> for these parts.  There is nothing in it for them to do so and may cause 
> maintenance headaches for them.  Some of us can pick up the slack though...
>
>
> -Original Message-
> From: elecraft-boun...@mailman.qth.net 
>  On Behalf Of David Gilbert
> Sent: Wednesday, June 22, 2022 10:47 AM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] [POSSIBLE SPAM] Common K3 failure modes???
>
>
> I have also.  The K3IO module is pretty fragile, it seems.  Of all the 
> requests I've seen here on the reflector over the years for a replacement 
> item, the K3IO tops the list from my memory ... you can't just buy a 
> replacement from Mouser or Digi-Key like you can the input diodes.  And when 
> it goes bad, the K3 becomes essentially useless for contesting.
>
> I keep saying that Elecraft should pass on the PC board artwork and component 
> specs (I assume that not all of them are standard devices) for key 
> discontinued modules to someone who might be interested in offering 
> replacement as a 3rd party.  It's one of my key gripes with Elecraft that 
> they seem to have no interest in doing so.
>
> Dave   AB7E
>   

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] RE: Common K3 failure modes??? - K3 Ethernet

[Dr. William J. Schmidt]

It essentially packages the serial data and sends it over ethernet.
Anything you can do via the old RS232 cable connection, you can do over
ethernet.  Additional functionality (like audio) is currently not
supported... but it could be I suppose...



-Original Message-
From: Mike Cizek W0VTT  
Sent: Wednesday, June 22, 2022 12:20 PM
To: b...@wjschmidt.com; elecraft@mailman.qth.net
Subject: [POSSIBLE SPAM] RE: [Elecraft] Common K3 failure modes??? - K3
Ethernet

I wonder how much of a market there would be for a K3 Ethernet I/O board?
What would we need on the other end to control the radio though a built in
Ethernet line?


73,
Mike Cizek W0VTT

-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Dr. William J. Schmidt
Sent: Wednesday, 22 June, 2022 11:40
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [POSSIBLE SPAM] Common K3 failure modes???

I actually designed and build a K3IO "ethernet" replacement KIO3
board...before the USB version was available.   I probably have the only
"ethernet" K3 on earth.   I may revive that card and replace the ethernet
stuff with USB parts so that I can fix some of these K3's laying around.  I
think there is ZERO chance that Elecraft will release parts/ boards/ gerbers
for these parts.  There is nothing in it for them to do so and may cause
maintenance headaches for them.  Some of us can pick up the slack though...


-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of David Gilbert
Sent: Wednesday, June 22, 2022 10:47 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [POSSIBLE SPAM] Common K3 failure modes???


I have also.  The K3IO module is pretty fragile, it seems.  Of all the
requests I've seen here on the reflector over the years for a replacement
item, the K3IO tops the list from my memory ... you can't just buy a
replacement from Mouser or Digi-Key like you can the input diodes.  And when
it goes bad, the K3 becomes essentially useless for contesting.

I keep saying that Elecraft should pass on the PC board artwork and
component specs (I assume that not all of them are standard devices) for key
discontinued modules to someone who might be interested in offering
replacement as a 3rd party.  It's one of my key gripes with Elecraft that
they seem to have no interest in doing so.

Dave   AB7E
 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to mgci...@gmail.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] Common K3 failure modes???

[Dr. William J. Schmidt]

I actually designed and build a K3IO "ethernet" replacement KIO3 board...before 
the USB version was available.   I probably have the only "ethernet" K3 on 
earth.   I may revive that card and replace the ethernet stuff with USB parts 
so that I can fix some of these K3's laying around.  I think there is ZERO 
chance that Elecraft will release parts/ boards/ gerbers for these parts.  
There is nothing in it for them to do so and may cause maintenance headaches 
for them.  Some of us can pick up the slack though...


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of David Gilbert
Sent: Wednesday, June 22, 2022 10:47 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [POSSIBLE SPAM] Common K3 failure modes???


I have also.  The K3IO module is pretty fragile, it seems.  Of all the requests 
I've seen here on the reflector over the years for a replacement item, the K3IO 
tops the list from my memory ... you can't just buy a replacement from Mouser 
or Digi-Key like you can the input diodes.  And when it goes bad, the K3 
becomes essentially useless for contesting.

I keep saying that Elecraft should pass on the PC board artwork and component 
specs (I assume that not all of them are standard devices) for key discontinued 
modules to someone who might be interested in offering replacement as a 3rd 
party.  It's one of my key gripes with Elecraft that they seem to have no 
interest in doing so.

Dave   AB7E
 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] Common K3 failure modes???

[Dr. William J. Schmidt]

My K3 failures always come in the form of either K3IOx failures (extremely
common) or the 10W module.  Everything else seems to hang together.

-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Geert Jan de Groot
Sent: Wednesday, June 22, 2022 3:30 AM
To: elecraft@mailman.qth.net
Subject: [POSSIBLE SPAM] [Elecraft] Common K3 failure modes???

On 22/06/2022 02:50, elecraft-requ...@mailman.qth.net wrote:
> With more K3 radios broken on the bench than working at my contest 
> station
> (J68HZ)  and NO spare modules to work with,

I am actually wondering about that. One of the magazines I read, the German
Funkamateur magazine, has a story each month about a group doing some
DXpedition and nearly every month they report about equipment getting broken
during such an event. As these things often use Elecraft, there are reports
of K3's failing.

But I wonder the failure mode because the stories don't report anything
about that. I know of a few failure modes:
- Diodes at input blown up because of extremely strong signals
near-frequency. Bandfilters may help, as does careful frequency planning and
some antenna distance. (ages ago I used a FT747 which uses a light bulb as
protection - after a heavy radio weekend I had the lightbulb open and one of
the input coils fused!)
- PA kickback causing the low-power amplifier transistors to fail - there
has been discussion on the list to add transzorb diodes
- Encoders for filter settings etc may fail - easy to replace
- volume knob was bumped on, causing potmeter broken - just replaced it
- Plastic knobs cracked - partially solved by Elecraft warranty, partly
solved by buying new ones myself ( with shipping and customs)
- Audio amplifier dying because of a short circuit at the output. There is a
mod kit for that.

I wonder about other failure modes. How does a K3 die at a contest station,
or a DXpedition, and what can be done to prevent?
What are the failures on the broken radios you are reporting about?

73,

Geert Jan PE1HZG


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] Re: WTB: K4

[Dr. William J. Schmidt]

With more K3 radios broken on the bench than working at my contest station
(J68HZ)  and NO spare modules to work with, I had to make a decision on
replacement radios if we are to participate in contests in the next few
months.  Knowing that the chances of receiving 3-5 K4 radios by October were
exactly zero, I had to find something else.  Therefore, I ordered several
Flex 6600 radios.  Shipped in less than 6 weeks.  Big learning curve, but
not much of an alternative.  They also integrate very easily other
automation products.  I know plenty of others that are contemplating the
same thing.

If you find a K4 used, it will be a miracle.

Dr. William J. Schmidt - K9HZ J68HZ

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Jim Brown
Sent: Monday, June 20, 2022 4:31 PM
To: elecraft@mailman.qth.net
Subject: [POSSIBLE SPAM] Re: [Elecraft] WTB: K4

I seriously doubt that anyone will part with one unless they're in money
trouble or giving up ham radio.

I've got one on order, but in the last few days, but I've been playing with
one that a friend loaned me while he's on vacation. Saturday night, I made
about 250 QSOs in a little less than 6 hours in the All Asia CW contest. I
love the filtering, diversity works awfully well with my Beverages, and
receive audio is significantly better than my K3s.

73, Jim K9YC

On 6/20/2022 1:36 PM, Alan D. Wilcox wrote:
> Considering adding a K4 to my shack, but not keen on the Elecraft 
> expected-delivery time.
> 
> Write or text me if you have one for me.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Kanga R2pro kits

[hawley, charles j jr]

Here are two ideas...


Si5351A VFO/SigGen (qrp-labs.com)
Si5351A VFO/SigGen - QRP Labs
3-30MHz Low Distortion Sinewave Signal Generator. The Si5351A Synth in the 
VFO/SigGen kit produces a squarewave output. Starting in firmware version s1.03 
the processor can control the 6 relays in the 6-band Relay-switched LPF 
kit.This feature can be used to automatically select a LPF depending on the VFO 
operating frequency, to optimally remove the harmonics and leave only a nice 
high quality ...
www.qrp-labs.com
XG3_XG3 RF Signal Source – Elecraft
[http://cdn.shopify.com/s/files/1/2029/4979/products/XG3_550_1024x1024.jpg?v=1518590481]
XG3_XG3 RF Signal Source – Elecraft
Introduction The XG3 is a powerful programmable signal source that fits in the 
palm of your hand. It's a versatile tool that may be used for receiver testing, 
receiver alignment, RF signal tracing and troubleshooting and may even serve as 
a VFO or local oscillator or homebrew projects. Overview OVERVIEW The XG3 is a
elecraft.com


​Chuck Hawley
 c-haw...@illinois.edu

 Amateur Radio, KE9UW
 aka Jack, BMW Motorcycles
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] P3SVGA availability

[Berbari, Edward J.]

Ted, 

I responded via your email address.  I have both P3 options available (P3SVGA 
and P3TXMON).  

Ed, W9EJB

Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Elecraft Service

[Dr. William J. Schmidt]

This brings up a rather sobering reality.  Over the last few months, I've 
depleted my parts supply for the K3/K3S to practically nothing after helping a 
few friends with failures.  For example, I stockpiled older KIO3 boards when 
people upgraded to the KIO3B boards... but my stash is gone now, after 
lightning strikes and other failures myself and friends have had.  I've also 
fixed a myriad of other modules in K3, KPA500, KPA1500 etc. and am just keeping 
my head above water at my contest stations due to lack of overall support.  I 
can scrounge and get individual parts, but no replacement cards are available.  
I guess we are all going to have to decide what our direction forward will be 
when the failure occurs for which there are no parts.

What are others doing?  Waiting in line for K4 or moving on to different 
vendors?

Anyone have "scrap" K3 or K3s for sale???


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 
VP2EHZ



-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Ronnie Hull
Sent: Thursday, April 21, 2022 9:47 AM
To: Wayne Burdick 
Cc: Elecraft Reflector ; rikoski 
Subject: Re: [Elecraft] Elecraft Service

I’ve been waiting three months just to get an RA for my K3 Ron W5SUM

Sent from my iPhone

> On Apr 21, 2022, at 9:09 AM, Wayne Burdick  wrote:
> 
> Hi Richard,
> 
> I'm investigating this and will get back to you ASAP.
> 
> Wayne
> N6KR
> 
> 
>> On Apr 21, 2022, at 6:23 AM, rikoski  wrote:
>> 
>> I got an RA number and sent my K3 to Elecraft for service going on 3 months 
>> now.
>> 
>> It has not been seviced; nor diagnosed.
>> 
>> I phoned a month ago and was told I was number 12 on the list.
>> 
>> I phoned yesterday and was told I was number 8.
>> 
>> I moved up four places in a month?
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net Please help support this 
>> email list: http://www.qsl.net/donate.html Message delivered to 
>> n...@elecraft.com
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> w5...@comcast.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] KPA500 Mosfet SD2933 vs VRF2933

[Dr. William J. Schmidt]

Mouser has 15 match pairs in stock today.  That’s what you want anyway, not
single devices even though it may not matter.  You are paying $6 for the
matching process.  VRF2933MP


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ
VP2EHZ

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of ziv1964
Sent: Tuesday, April 12, 2022 4:53 AM
To: elecraft@mailman.qth.net
Subject: [POSSIBLE SPAM] [Elecraft] KPA500 Mosfet SD2933 vs VRF2933

Hi

Got a malfunction KPA500 with suspect MosFet that are dead. Current
VRF2933 hot long lead time at Mouser and Digi-key, however I got several
SD2933 mosfet in hand. Any idea of the SD2933 can be used as replacement?


thanks

Ziv - 4Z4OQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] Re: Shipping via UPS - A Lesson Learned the Hard Way

[Dr. William J. Schmidt]

The secret to this is getting your own UPS account online.  Its FREE.  Then 
printing out the REAL UPS labels and getting the real UPS PRICE 
online(nothing fancy needed except a printer).   THEN dropping your package 
off at the local UPS STORE.  FREE.   You will also find that UPS will start 
sending you coupons for 10-20% off shipping.  I found this out using UPS for my 
businesses. 


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 
VP2EHZ

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Mike Fatchett
Sent: Monday, April 11, 2022 5:41 PM
To: elecraft@mailman.qth.net
Subject: [POSSIBLE SPAM] Re: [Elecraft] Shipping via UPS - A Lesson Learned the 
Hard Way

They are franchise type stores and the rates are ridiculous.  My son worked at 
one for about a year.   At least they gave you the honest answer and were able 
to handle at an actual UPS shipping location.  The shipping rates are higher 
too.

W0MU

On 4/11/2022 4:29 PM, eda...@aya.yale.edu wrote:
> I just shipped some of my Elecraft gear to someone who had purchased 
> it from me.  The agreement was that I would ship it and they would 
> bear the shipping expense.  The buyer was OK with my using UPS.
>
>   
>
> So I packed it up and took it to "The UPS Store."  There are about 30 
> of them in the Denver metro area and about a dozen in the city itself.  
> Before taking the package there I looked at UPS on-line to see what 
> insurance would cost.  The UPS site said $1.05 per hundred dollars in 
> excess of the $100 included in the shipping rate.  When I arrived at 
> the UPS Store they charged me $4.50 per $100.  That difference times 
> the value of what I was shipping came to well over $100.  When I 
> questioned it (more accurately, when I complained about it) they told 
> me that UPS and The UPS Store are different entities.  The latter, 
> they said, is a network of franchises independent of the real UPS that 
> "works with" UPS for retail shipping and receiving.  So what I had 
> seen on the UPS website was what UPS charges, not the grossly inflated 
> premium The UPS Store charges.  OK, I asked, how can I ship this via 
> UPS itself?  The answer was a 90 minute round-trip drive to the nearest real 
> UPS terminal.
>
>   
>
> The UPS Store does not charge real UPS rates.  They have UPS in their name.
> They use a logo indistinguishable from the UPS logo.  Their counter 
> clerks wear UPS Brown.  There was a standar UPS truck parked in front of the 
> shop.
> There was NOTHING visible to me in the store that indicated it wasn't 
> a UPS shop.  Maybe everyone on this reflector already knows about 
> this.  Until this morning I didn't.
>
>   
>
> There's an old maxim that a happy customer tells one other person 
> about their experience.  An unhappy customer tells ten other people.
>
>   
>
> Ted, KN1CBR
>
>   
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> w...@w0mu.com

--
Mike W0MU

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] ELECRAFT HAT is now in stock...

[hawley, charles j jr]

I'm wondering if the newest hat has an adequate crown. I have three of them and 
the first one seems better than the second one. I gave that one to my wife and 
bought yet another. It's not so good either.
SO...I bought a Northern California DX Foundation hat which was suggested here 
and it's great. Half the price too, but that's not a deal breaker.
I still miss wearing the Elecraft hat...hoping that I'll meet someone at the 
coffee house who also has a K transceiver but is hatless and speaks out when 
they see mine.
Any reviews on the latest hat?

​Chuck Hawley
 c-haw...@illinois.edu

 Amateur Radio, KE9UW
 aka Jack, BMW Motorcycles
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KPA 500

[Dr. William J. Schmidt]

During field day, I've seen unwanted leakage change the band on the amp from 
another transmitter during the receiving cycle.  Another good reason to 
hard-wire it.

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Wes
Sent: Wednesday, March 23, 2022 4:26 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA 500

Hmm.  I used to joke that I bought a KPA500 just so I could switch bands on my
K3 without accidentally changing the VOX setting.

N7WS

On 3/23/2022 1:58 PM, Ken K6MR wrote:
>   "They are a "bandaid" for the lack of band buttons on the K3."
>
> I've always considered "band buttons" on any radio to be the worst possible 
> use of front panel space I can think of.  I always operate with a logging 
> program open, and it's far easier to just type in the frequency I want 
> without removing my hands from the keyboard.
>
> I think with the amplifier they just had so much front panel space available 
> that they just couldn't think of anything else to put there.  In the years 
> I've had KPA500s and a KPA1500 I have yet to touch them.  To each his own.
>
> Ken K6MR
>
>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] Re: FW: KPA500 faults

[Dr. William J. Schmidt]

Correct...


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 
VP2EHZ
email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Mike Fatchett
Sent: Thursday, March 3, 2022 6:31 PM
To: elecraft@mailman.qth.net
Subject: [POSSIBLE SPAM] Re: [Elecraft] FW: KPA500 faults

St. Lucia is 240v.  I don't know why he would run it on 120v or 110v.

W0MU

On 3/3/2022 1:39 PM, Naumann, Robert, W5OV wrote:
> Bill,
>
> Thanks for the additional information.
>
> Can you tell us if you are running it on 120v?
>
> -Bob W5OV
>
>
> -Original Message-
> From: Dr. William J. Schmidt 
> Sent: Thursday, March 3, 2022 10:40
> To: Naumann, Robert, W5OV ; elecraft@mailman.qth.net
> Subject: RE: [Elecraft] FW: KPA500 faults
>
> Sorry guys, this is not a trivial line voltage problem.
>
> The 60V line to the PA does not sag that much (starts at 72V goes to 60V 
> under FULL LOAD as measured at the PA)... it's in the voltage divider for the 
> 60V/32 line or the connectors that carry it to the front panel processor for 
> digitizing.  Changes with heat load.  This amp is in the Caribbean and there 
> is plenty of excess heat and corrosion. (nb. I just replaced the current 
> sensing resistor in my K3S for the 100W module due to a hair-line crack... 
> surmise it was heating).
>
>
> Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ 
> PJ2/K9HZ VP2EHZ
>
> email:  b...@wjschmidt.com
>
>
> -Original Message-
> From: elecraft-boun...@mailman.qth.net 
>  On Behalf Of Naumann, Robert, W5OV
> Sent: Thursday, March 3, 2022 9:11 AM
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] FW: KPA500 faults
>
>
> What line voltage are you running it on?  If you're not on 240v, switching to 
> 240v would be the easiest and most effective improvement.
>
> Doing so yields a 4:1 improvement in line voltage regulation / reduction in 
> voltage drop.  Double the voltage, at half the current draw.
>
> 73,
>
> Bob W5OV
>
> -Original Message-
> From: elecraft-boun...@mailman.qth.net 
>  On Behalf Of Dr. William J. Schmidt
> Sent: Thursday, March 3, 2022 00:39
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] KPA500 faults
>
> I have a KPA500 that faults on low (60 VDC) voltage.  After measuring the 
> power supply voltage at the PA module is perfectly fine.  The voltage read by 
> the processor on the front panel via pin 10 of P1 is lower than it should be 
> and hence the fault condition.  I suspect there is a voltage divider on the 
> LPF board that drops the 60 VDC to something that the processor can read and 
> digitize (in the 0 to 3-5 volt range).  The set of schematics I have do not 
> show the voltage divider anywhere. does anyone have this part of the 
> schematics for the KPA500 so that I can adequately troubleshoot this amp and
> get it on the air for the contest this weekend?   Multiple notes to Elecraft
> have gone unanswered.
>
>   
>
>   
>
> Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ 
> PJ2/K9HZ VP2EHZ
>
>   
>
>   
>
> email:   <mailto:b...@wjschmidt.com> b...@wjschmidt.com
>
>   
>
>   
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> w...@arrl.org 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> b...@wjschmidt.com
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> w...@w0mu.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b

Re: [Elecraft] FW: KPA500 faults

[Dr. William J. Schmidt]

Sorry guys, this is not a trivial line voltage problem.

The 60V line to the PA does not sag that much (starts at 72V goes to 60V
under FULL LOAD as measured at the PA)... it's in the voltage divider for
the 60V/32 line or the connectors that carry it to the front panel processor
for digitizing.  Changes with heat load.  This amp is in the Caribbean and
there is plenty of excess heat and corrosion. (nb. I just replaced the
current sensing resistor in my K3S for the 100W module due to a hair-line
crack... surmise it was heating).


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ
VP2EHZ

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Naumann, Robert, W5OV
Sent: Thursday, March 3, 2022 9:11 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] FW: KPA500 faults


What line voltage are you running it on?  If you're not on 240v, switching
to 240v would be the easiest and most effective improvement.

Doing so yields a 4:1 improvement in line voltage regulation / reduction in
voltage drop.  Double the voltage, at half the current draw.

73,

Bob W5OV

-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Dr. William J. Schmidt
Sent: Thursday, March 3, 2022 00:39
To: elecraft@mailman.qth.net
Subject: [Elecraft] KPA500 faults

I have a KPA500 that faults on low (60 VDC) voltage.  After measuring the
power supply voltage at the PA module is perfectly fine.  The voltage read
by the processor on the front panel via pin 10 of P1 is lower than it should
be and hence the fault condition.  I suspect there is a voltage divider on
the LPF board that drops the 60 VDC to something that the processor can read
and digitize (in the 0 to 3-5 volt range).  The set of schematics I have do
not show the voltage divider anywhere. does anyone have this part of the
schematics for the KPA500 so that I can adequately troubleshoot this amp and
get it on the air for the contest this weekend?   Multiple notes to Elecraft
have gone unanswered.

 

 

Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ
VP2EHZ

 

 

email:   <mailto:b...@wjschmidt.com> b...@wjschmidt.com

 

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to w...@arrl.org
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KPA500 faults

[Dr. William J. Schmidt]

I have a KPA500 that faults on low (60 VDC) voltage.  After measuring the
power supply voltage at the PA module is perfectly fine.  The voltage read
by the processor on the front panel via pin 10 of P1 is lower than it should
be and hence the fault condition.  I suspect there is a voltage divider on
the LPF board that drops the 60 VDC to something that the processor can read
and digitize (in the 0 to 3-5 volt range).  The set of schematics I have do
not show the voltage divider anywhere. does anyone have this part of the
schematics for the KPA500 so that I can adequately troubleshoot this amp and
get it on the air for the contest this weekend?   Multiple notes to Elecraft
have gone unanswered.

 

 

Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ
VP2EHZ

 

 

email:   <mailto:b...@wjschmidt.com> b...@wjschmidt.com

 

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] D-104 Mic Element Replacement

[J Damkoehler]

On Tue, Feb 22, 2022 at 20:19 Don Wilhelm  wrote:

> I have used electric elements in the D104 and they worked quite well.
> If you want a dynamic element, I suggest the HC4 or HC5 from Heil
> Sound.  I don't know if Heil is still selling those mic elements
> separately, but they do work well in the D104 (and other mics). Just add
> enough foam padding to keep the element in place and you are done.
> I have a D104 frame with an HC5 element and it works quite well. I also
> have a vintage D104 with the original element with an FET in the base
> that also works well - the FET is powered by the bias voltage from my K3
> or K2.  I know that does not help if the original D104 mic element has
> gone bad.
>
> 73,
> Don W3FPR
>
> On 2/22/2022 8:19 PM, Dr. William J. Schmidt wrote:
> > No replacement available...
> >
> > Well... that's not entirely True.  If you search a little, you can find
> > places all over the internet where you can buy "old stock" or "removed"
> D104
> > elements.  Just depends which one/ kind you want.   IN FACT just a few
> years
> > ago I bought a hand full of "authentic Astatic, old stock" the later
> crystal
> > replacements... brand-new... from one of the big electronic houses like
> > Mouser or Digikey (can't remember which one actually).  I think they
> were in
> > the $28 each...
> >
> > Just search.  Here are a couple that I found in 30 seconds:
> >
> > https://www.theharpmicshop.com/crystal---ceramic-mic-elements.html
> >
> > http://www.kenselectronics.com/lists/micpart.htm#Cartridges
> >
> >
> >
> >
> >
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w4eb...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] D-104 Mic Element Replacement

[Dr. William J. Schmidt]

No replacement available...

Well... that's not entirely True.  If you search a little, you can find
places all over the internet where you can buy "old stock" or "removed" D104
elements.  Just depends which one/ kind you want.   IN FACT just a few years
ago I bought a hand full of "authentic Astatic, old stock" the later crystal
replacements... brand-new... from one of the big electronic houses like
Mouser or Digikey (can't remember which one actually).  I think they were in
the $28 each...   

Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ
VP2EHZ

email:  b...@wjschmidt.com
 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] Re: D-104 Mic Element Replacement

[Dr. William J. Schmidt]

No replacement available...

Well... that's not entirely True.  If you search a little, you can find
places all over the internet where you can buy "old stock" or "removed" D104
elements.  Just depends which one/ kind you want.   IN FACT just a few years
ago I bought a hand full of "authentic Astatic, old stock" the later crystal
replacements... brand-new... from one of the big electronic houses like
Mouser or Digikey (can't remember which one actually).  I think they were in
the $28 each...   

Just search.  Here are a couple that I found in 30 seconds:

https://www.theharpmicshop.com/crystal---ceramic-mic-elements.html

http://www.kenselectronics.com/lists/micpart.htm#Cartridges




Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ
VP2EHZ

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Tim Tucker
Sent: Tuesday, February 22, 2022 6:25 PM
To: elecraft 
Subject: [POSSIBLE SPAM] Re: [Elecraft] D-104 Mic Element Replacement

Are you referring to the original non amplified D104?  If so, there is no
replacement available.  There is a lengthy thread about a proposed
(dormant) project to recreate the element here:
https://www.worldwidedx.com/threads/d-104.241890/

Tim

On Tue, Feb 22, 2022 at 11:22 AM Wilson Lamb via Elecraft <
elecraft@mailman.qth.net> wrote:

>
> OK, discriminating operators, does anyone know of a good replacement 
> D-104 element.
> Yes, I have been on the web and see dynamic and electret replacements.  
> My uses don't involve electret empowered radios.
> I also see statements that all the ceramic replacements have been 
> sold, but I hold out hope.
> Does anyone know of a good ceramic element?
> Does anyone know if the dynamic/transformer replacement is near the 
> same sensitivity as the original crystal?
> I have three D-104, one of which was my dad's, from the 540s.  It's 
> lost its midrange.
> Thanks,
> Wilson
> W4BOH
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> ae...@worldwidedx.com



--
Owner, worldwidedx.com
AE6LX, Amateur Radio
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] HI CURR indicator on K3S display

[Dr. William J. Schmidt]

I've eliminated the power supply as the problem.  Tried three different ones 
and see the same issue (long shot anyway... I use high quality supplies).  I 
did remove the 100W module and everything works perfectly fine, so the problem 
is confined to the LPA3...  The fact that I can't calibrate the gain at 50W 
(fine at 5W) tells me I may have a bad transistor.  Ordered a fist full of 
transistors... will take the module back to the USA and put it on one of my RF 
bench at work to diagnose it further.  Also have a spare LPA3 if all else fails.


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 
VP2EHZ

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Bob McGraw
Sent: Friday, February 4, 2022 10:07 AM
To: elecraft@mailman.qth.net
Subject: [POSSIBLE SPAM] [Elecraft] HI CURR indicator on K3S display

Well clearly one of the indications, radio or power supply, is incorrect.

Just checked mine:

TX @ 100 watts, radio display = 18.3 amps, Power supply = 19.0 amps.

Voltage:  Radio RX = 14.3, PS = 14.5.   Voltage:  TX Radio = 13.9v, PS =14.5v

If the power supply voltage drops during TX, the control circuit will attempt 
to produce 100 watts in which the current may increase.   Also, different bands 
at 100 watts will draw different amount of current during transmit.

I actually found with a 100 watt power setting on the radio, the actual output 
power was more than 120 watts.  (See the discussion on Power Calibration).  
This would of course affect the current demand.

73

Bob, K4TAX


On 2/4/2022 2:16 AM, elecraft-requ...@mailman.qth.net wrote:
> Message: 4
> Date: Tue, 1 Feb 2022 18:12:38 -0600
> From: "Dr. William J. Schmidt" 
> To:
> Subject: [Elecraft] HI CURR indicator on K3S display 
> Message-ID:<006401d817c9$990051f0$cb00f5d0$@wjschmidt.com>
> Content-Type: text/plain; charset="us-ascii"
>
> I remember some discussion about HI CURR issues and the causes here a 
> while ago.  I just noticed it on my radio.. Changing the display to 
> read amps, it indicates 21.6 amps, but the amp meter on the power 
> supply is only showing
> 10.1 amps.  The radio sensing circuit seems to be in error.  Anyone 
> else delt with this?
>
>   
>
>   
>
> Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ 
> PJ2/K9HZ VP2EHZ

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KAT500 drops out during voice peaks

[hawley, charles j jr]

No, it’s always been on manual since I got it. And it never used to do this. 
Nothing is changed in the shack except in using a 4:1 balun instead of a 1:1. 
The timing is similar.
Tomorrow I’ll reinstall that and see if it persists.
An arc outside is a thought too. I will check my open wire feed line as well.
Thanks for the replies.

Jack BMW Motorcycles
BMWMOA  #224
Chuck KE9UW 

Sent from my iPhone 

> On Feb 3, 2022, at 8:49 PM, Jack Brindle  wrote:
> 
> It sounds like you may have the KAT500 set for AUTO. Change it to MAN and it 
> should perform much better.
> 
> The rapid signal changes associated with SSB operation can cause issues with 
> the sampling of the power in the directional coupler,
> causing readings that make the KAT think it needs to do a tune. By using MAN 
> mode you get to decide when a tune is needed,
> making everyone much happier.
> 
> 73,
> Jack, W6FB
> 
> 
>> On Feb 3, 2022, at 6:20 PM, hawley, charles j jr  
>> wrote:
>> 
>> I've been having my tuner go to high swr a random voice peak.
>> The utility shows the right settings after a drop out but the Amp Key 
>> Interrupt box is checked.
>> And the swr showing on the LEDs is high.
>> Not sure what is going on.
>> I get it back to operating at low swr by doing a tune.
>> 
>> ​Chuck Hawley
>> c-haw...@illinois.edu
>> 
>> Amateur Radio, KE9UW
>> aka Jack, BMW Motorcycles
>> __
>> Elecraft mailing list
>> Home: 
>> https://urldefense.com/v3/__http://mailman.qth.net/mailman/listinfo/elecraft__;!!DZ3fjg!uJDoy1FWxUYpz--TnKLEuyKIryM2XZeT_HBT2oKzgYNpYl-KQ2rQSEeX5EJJc65tGUzJ$
>>  
>> Help: 
>> https://urldefense.com/v3/__http://mailman.qth.net/mmfaq.htm__;!!DZ3fjg!uJDoy1FWxUYpz--TnKLEuyKIryM2XZeT_HBT2oKzgYNpYl-KQ2rQSEeX5EJJcx1CaJ9F$
>>  
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: 
>> https://urldefense.com/v3/__http://www.qsl.net__;!!DZ3fjg!uJDoy1FWxUYpz--TnKLEuyKIryM2XZeT_HBT2oKzgYNpYl-KQ2rQSEeX5EJJc3luulr6$
>>  
>> Please help support this email list: 
>> https://urldefense.com/v3/__http://www.qsl.net/donate.html__;!!DZ3fjg!uJDoy1FWxUYpz--TnKLEuyKIryM2XZeT_HBT2oKzgYNpYl-KQ2rQSEeX5EJJc2RJLdJp$
>>  
>> Message delivered to jackbrin...@me.com
> 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KAT500 drops out during voice peaks

[hawley, charles j jr]

I've been having my tuner go to high swr a random voice peak.
The utility shows the right settings after a drop out but the Amp Key Interrupt 
box is checked.
And the swr showing on the LEDs is high.
Not sure what is going on.
I get it back to operating at low swr by doing a tune.

​Chuck Hawley
 c-haw...@illinois.edu

 Amateur Radio, KE9UW
 aka Jack, BMW Motorcycles
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] RE: HI CURR indicator on K3S display

[Dr. William J. Schmidt]

5W RF power calibrates fine.  The 50W fails.  Gonna remove the 100W module 
today and see if I have a bad transistor…  Difficult to do here on the island… 
have not built up my test equipment stash here much more than a DVM and an 
antenna analyzer.

 

 

Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 
VP2EHZ

 

email:   <mailto:b...@wjschmidt.com> b...@wjschmidt.com

 

 

From: Ray  
Sent: Wednesday, February 2, 2022 12:55 AM
To: b...@wjschmidt.com; elecraft@mailman.qth.net
Subject: [POSSIBLE SPAM] RE: [Elecraft] HI CURR indicator on K3S display

 

Dr William………. 

Time to hook your radio up to a 50 Ohm Dummy Load, and Retake readings.

Ray WA6VAB  K3

 

 

From: Dr. William J. Schmidt <mailto:b...@wjschmidt.com> 
Sent: Tuesday, February 1, 2022 6:40 PM
To: elecraft@mailman.qth.net <mailto:elecraft@mailman.qth.net> 
Subject: Re: [Elecraft] HI CURR indicator on K3S display

 

Unfortunately, my metering outside of the radio shows only 10.1 amps when the 
radio shows 20+ amps.  Radio and outboard voltage metering showing 13.0 VDC.  
Also shown 6.6A for 5W out.  Something is up.

 

 

Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 
VP2EHZ

 

email:  b...@wjschmidt.com <mailto:b...@wjschmidt.com> 

 

 

-Original Message-

From: William Ferry mailto:jdbf...@comcast.net> > 

Sent: Tuesday, February 1, 2022 7:01 PM

To: b...@wjschmidt.com <mailto:b...@wjschmidt.com> 

Subject: Re: [Elecraft] HI CURR indicator on K3S display

 

I recently had a problem where both my K3’s were taking over 30Amps (PS) and at 
times the K3 shut down.  

Surprisingly it happened with two different K3’s and two different power 
supplies (Astron RS 35 and M).  The K3 displays all read just over 20 Amps at 
near 100w output into a dummy load on both units.  I checked with Elecraft and 
they had high confidence the current read by the K3 was correct.

I decided to borrow a clamp-on Ammeter to measure the DC current independently. 

Yup. 20+ amps (like the K3)before it shut down.  

I found both supplies had issues.  One the current limit was set too low.  The 
other the current sensing resistor had been changed to the wrong value.  Plus 
the current meter were not calibrated correctly.  

Hence I suggest you find a meter to independently measure the power supply.

Regards,

Bill

K1BZM

PS I think we have worked on all bands from 80-6!

 

 

 

Sent from my iPhone

 

> On Feb 1, 2022, at 7:14 PM, Dr. William J. Schmidt  <mailto:b...@wjschmidt.com> > wrote:

> 

> I remember some discussion about HI CURR issues and the causes here a 

> while ago.  I just noticed it on my radio.. Changing the display to 

> read amps, it indicates 21.6 amps, but the amp meter on the power 

> supply is only showing

> 10.1 amps.  The radio sensing circuit seems to be in error.  Anyone 

> else delt with this?

> 

> 

> 

> 

> 

> Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ 

> PJ2/K9HZ VP2EHZ

> 

> 

> 

> email:   <mailto:b...@wjschmidt.com> b...@wjschmidt.com 
> <mailto:b...@wjschmidt.com> 

> 

> 

> 

> 

> 

> __

> Elecraft mailing list

> Home: http://mailman.qth.net/mailman/listinfo/elecraft

> Help: http://mailman.qth.net/mmfaq.htm

> Post: mailto:Elecraft@mailman.qth.net

> 

> This list hosted by: http://www.qsl.net Please help support this email 

> list: http://www.qsl.net/donate.html Message delivered to 

> jdbf...@comcast.net <mailto:jdbf...@comcast.net> 

 

__

Elecraft mailing list

Home: http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:Elecraft@mailman.qth.net

 

This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html

Message delivered to wa6...@gmail.com <mailto:wa6...@gmail.com>  

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] HI CURR indicator on K3S display

[Dr. William J. Schmidt]

Unfortunately, my metering outside of the radio shows only 10.1 amps when the 
radio shows 20+ amps.  Radio and outboard voltage metering showing 13.0 VDC.  
Also shown 6.6A for 5W out.  Something is up.


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 
VP2EHZ

email:  b...@wjschmidt.com


-Original Message-
From: William Ferry  
Sent: Tuesday, February 1, 2022 7:01 PM
To: b...@wjschmidt.com
Subject: Re: [Elecraft] HI CURR indicator on K3S display

I recently had a problem where both my K3’s were taking over 30Amps (PS) and at 
times the K3 shut down.  
Surprisingly it happened with two different K3’s and two different power 
supplies (Astron RS 35 and M).  The K3 displays all read just over 20 Amps at 
near 100w output into a dummy load on both units.  I checked with Elecraft and 
they had high confidence the current read by the K3 was correct.
I decided to borrow a clamp-on Ammeter to measure the DC current independently. 
Yup. 20+ amps (like the K3)before it shut down.  
I found both supplies had issues.  One the current limit was set too low.  The 
other the current sensing resistor had been changed to the wrong value.  Plus 
the current meter were not calibrated correctly.  
Hence I suggest you find a meter to independently measure the power supply.
Regards,
Bill
K1BZM
PS I think we have worked on all bands from 80-6!



Sent from my iPhone

> On Feb 1, 2022, at 7:14 PM, Dr. William J. Schmidt  wrote:
> 
> I remember some discussion about HI CURR issues and the causes here a 
> while ago.  I just noticed it on my radio.. Changing the display to 
> read amps, it indicates 21.6 amps, but the amp meter on the power 
> supply is only showing
> 10.1 amps.  The radio sensing circuit seems to be in error.  Anyone 
> else delt with this?
> 
> 
> 
> 
> 
> Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ 
> PJ2/K9HZ VP2EHZ
> 
> 
> 
> email:   <mailto:b...@wjschmidt.com> b...@wjschmidt.com
> 
> 
> 
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> jdbf...@comcast.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] HI CURR indicator on K3S display

[Dr. William J. Schmidt]

I remember some discussion about HI CURR issues and the causes here a while
ago.  I just noticed it on my radio.. Changing the display to read amps, it
indicates 21.6 amps, but the amp meter on the power supply is only showing
10.1 amps.  The radio sensing circuit seems to be in error.  Anyone else
delt with this?

 

 

Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ
VP2EHZ

 

email:   <mailto:b...@wjschmidt.com> b...@wjschmidt.com

 

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] FW: [POSSIBLE SPAM] Re: On ground - in ground radials

[Dr. William J. Schmidt]

Its properly called circulating currents. 

Imagine two wires same length same signal.  If they touch at the same place on 
both wires, same phase and amplitude, no issue.  Now a different experiment... 
one of the wires is straight, the other is folded so that you can touch them at 
different points.  Now, touching at different phase and amplitudes.  What 
happens?  You know the answer.


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 
VP2EHZ


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Mike Fatchett
Sent: Monday, January 17, 2022 10:23 AM
To: elecraft@mailman.qth.net
Subject: [POSSIBLE SPAM] Re: [Elecraft] On ground - in ground radials

A well known 9 lander lid uses chicken wire for his 160 antenna and it works 
very very well.  I am not sure what effect crossing the wires has.  Has anyone 
done any real testing of this or is it just theory or a wives tale?  Did he 
stumble upon the holy grail of radials?

Most of the results of the radial field are from the first 50 percent or so.  
You do not necessarily have to have 66 ft radials on 80m to work and get out.  
Put out as many as you can as long as you can and shorter radials are fine too.

W0MU

On 1/16/2022 2:15 PM, Dave Fugleberg wrote:
> This discussion reminded me of a question that I’ve often wondered 
> about but have never asked.
> I have read that when laying out radials on or under the ground, one 
> should be careful to ensure that they radiate out from a central point 
> without ever crossing one another.
>
> I have also read about this idea of using galvanized mesh in place of 
> a traditional radial field. In a mesh, the conductors not only cross, 
> but are bonded together at every crossing.
>
> So, is there actually an issue if a couple radials happen to cross 
> each other?
>
> Not that one would do so on purpose, but when adding radials to a 
> system where the existing ones are no longer visible, it could easily 
> happen…
>
> Curious minds want to know.
>
>
> On Sun, Jan 16, 2022 at 2:55 PM Jim Brown  wrote:
>
>> On 1/16/2022 12:19 PM, Mike Markowski wrote:
>>> A construction site had left over galvanized mesh rolls that I 
>>> bought at great discount.  I unrolled them symmetrically about my 
>>> then soon-to-be installed vertical.  Easier than individual for lazy 
>>> hams like me:-)  and 2nd qso at 100W from Pennsylvania was Cambodia!
>>> That qso made my day and then some.
>> Rob Sherwood, KC0B, published on this in the May 1977 edition of "Ham 
>> Radio," and I included his ideas in this talk.
>>
>> http://k9yc.com/160MPacificon.pdf
>>
>> 73, Jim K9YC
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net Please help support this 
>> email list: http://www.qsl.net/donate.html Message delivered to 
>> dave.w...@gmail.com
>>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to 
> w...@w0mu.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Cleaning solder flux

[Dr. William J. Schmidt]

During my under-graduate and graduate school careers, I worked at
Honeywell's circuit board fabrication shop for about a year and a half.  We
had two machines in the shop that dealt with flux: a reflow machine and a
parts set machine.  The reflow machine was used to reflow the solder after
plating so that it looked shiny.  The board was emersed in a 601-type flux,
heated to about 425F, cooled down, and then scrubbed (brushed) with
Isopropanol alcohol three times (stages) with a water rinse and force-air
dried (all automagically).  The solder was beautiful and shiny at the end of
this process.  The parts-setting machine was similar... the whole
(pre-reflowed) board was fluxed, the parts set, heated, and then cleaned.
All fluxes come off with Isopropanol alcohol (remember IPA is polar like
water and works that way).

 

Fluxes come in various forms... some are more corrosive and some not... so
you should follow the directions (right off the website).  Rosin can remain
on a board, but also can be problematic because it can collect debris (dust
and other unwanted materials) because its plastic (flows at room
temperature) sticky.  Many of the water-soluble fluxes are more acidic, and
will tarnish the solder joints if not removed.

 

On the subject of using water on electrical components... most components
(particularly if they might be mil spec) are made for water emersion (NOT
ALL!).  In my office lab we routinely clean circuit boards by scrubbing them
with just water and force-drying them.  Works fine.  About a decade ago, I
used to buy up surplus AM/ broadcast band transmitters for repurposing to
other countries (mainly south America) for the Christian broadcasting
markets.  Once back at my shop, the first stop was a good through power
washing in the driveway (paper and other water damaged goods removed of
course) followed by a good drying (leaf blower).  Works fine!

 

 

Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ
VP2EHZ

 



-- 
This email has been checked for viruses by AVG.
https://www.avg.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] Re: Cleaning solder flux

[Dr. William J. Schmidt]

During my under-graduate and graduate school careers, I worked at Honeywell's 
circuit board fabrication shop for about a year and a half.  We had two 
machines in the shop that dealt with flux: a reflow machine and a parts set 
machine.  The reflow machine was used to reflow the solder after plating so 
that it looked shiny.  The board was emersed in a 601-type flux, heated to 
about 425F, cooled down, and then scrubbed (brushed) with Isopropanol alcohol 
three times (stages) with a water rinse and force-air dried (all 
automagically).  The solder was beautiful and shiny at the end of this process. 
 The parts-setting machine was similar... the whole (pre-reflowed) board was 
fluxed, the parts set, heated, and then cleaned.  All fluxes come off with 
Isopropanol alcohol (remember IPA is polar like water and works that way).

Fluxes come in various forms... some are more corrosive and some not... so you 
should follow the directions (right off the website).  Rosin can remain on a 
board, but also can be problematic because it can collect debris (dust and 
other unwanted materials) because its plastic (flows at room temperature) 
sticky.  Many of the water-soluble fluxes are more acidic, and will tarnish the 
solder joints if not removed.

On the subject of using water on electrical components... most components 
(particularly if they might be mil spec) are made for water emersion (NOT 
ALL!).  In my office lab we routinely clean circuit boards by scrubbing them 
with just water and force-drying them.  Works fine.  About a decade ago, I used 
to buy up surplus AM/ broadcast band transmitters for repurposing to other 
countries (mainly south America) for the Christian broadcasting markets.  Once 
back at my shop, the first stop was a good through power washing in the 
driveway (paper and other water damaged goods removed of course) followed by a 
good drying (leaf blower).  Works fine!


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 
VP2EHZ

Owner - Operator
Big Signal Ranch – K9ZC
Staunton, Illinois

Owner – Operator
Villa Grand Piton – J68HZ
Soufriere, St. Lucia W.I.
Rent it: www.VillaGrandPiton.com
Like us on Facebook! 

Moderator – North American QRO Group at Groups.IO.

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of eda...@aya.yale.edu
Sent: Saturday, January 1, 2022 10:36 PM
To: 'Mark Goldberg' 
Cc: elecraft@mailman.qth.net
Subject: [POSSIBLE SPAM] Re: [Elecraft] Cleaning solder flux

Yes, that makes sense; though my focus was on Elecraft’s boards in their 
traditional kits.  For my very limited purpose the replies have told me enough 
and I am grateful for them all.

 

I am reminded nonetheless of a trope that’s popular in the kind of work I do, 
or did:  “If all the economists in the world were laid end to end, they would 
still not reach a conclusion.”

 

There’s a similar quote by Dorothy Parker, but I’ll leave that one for off-line.

 

Ted, KN1CBR

 

 

 

 

From: Mark Goldberg 
Sent: Saturday, January 1, 2022 9:24 PM
To: eda...@aya.yale.edu
Cc: Elecraft Mailing List 
Subject: Re: [Elecraft] Cleaning solder flux

 

There is no clear consensus because there are many different fluxes, different 
use cases and different environmental conditions that the products will be 
expected to be used in. It would be useful to find out what the manufacturer of 
the particular flux used says to do. That is not sufficient, as the product 
requirements then come into play. If you really want to go off the deep end, 
get copies of IPC-A-610 and J-STD-001, which define how electronic assemblies 
should be built and inspected. Unfortunately, unless you have access through 
work or academia, they cost money. They also reference many other documents for 
specific aspects.

 

73,

 

Mark

W7MLG

 

On Sat, Jan 1, 2022 at 7:56 PM mailto:eda...@aya.yale.edu> > wrote:

My thanks to the many who replied.  The answer to my question - whether there 
is a consensus about how (or whether) to remove solder flux from PCBs
- is a clear no, there is no consensus.



But I learned a lot.  Tnx to all,



Ted, KN1CBR



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net <mailto:Elecraft@mailman.qth.net> 

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to marklgoldb...@gmail.com <mailto:marklgoldb...@gmail.com>  

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/d

Re: [Elecraft] [POSSIBLE SPAM] Cleaning Solder Flux, Redux

[Dr. William J. Schmidt]

Professionals use 91% Isopropanol.  You can get it at CVS cheap.


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ
VP2EHZ



-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of eda...@aya.yale.edu
Sent: Friday, December 31, 2021 2:53 PM
To: elecraft@mailman.qth.net
Subject: [POSSIBLE SPAM] [Elecraft] Cleaning Solder Flux, Redux

 

Is there a consensus among builders of the traditional kits (K1, K2, etc)
about the best way to remove solder flux from a completed circuit board?
Some Internet sites recommend acetone, others say isopropyl alcohol. A few
tout their own product without saying exactly what it is.  I remember
reading someplace that one or the other of those will clean the flux but
could also cause damage by being absorbed into components.  Yes, I know this
is all purely cosmetic but if it can be done safely I'd like to try it on
the next kit.  Suggestions?

 

Thanks,

 

Ted, KN1CBR

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to b...@wjschmidt.com 


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] I'm Thrilled with my new K4

[Gary J Ferdinand]

lol He didn’t promise a technical paper, just relating his pleasure with the 
rig.   Happy New Year 

73/Gary W2CS




> On Dec 28, 2021, at 11:05, David Gilbert  wrote:
> 
> 
> "This is the best rig I've ever used"
> 
> That's a bit vague.  Which other rigs are you comparing it to, and what 
> specifically makes the K4 so much better?  I assume you like the ergonomics, 
> but have you also found any performance advantages, and if so what are they?
> 
> Thanks and 73,
> Dave   AB7E
> 
> 
> 
> 
> On 12/28/2021 8:41 AM, k2we via Elecraft wrote:
>> I just had to drop the list a note.. After waiting almost 18 months, my new 
>> K4 arrived last week.. What a great Christmas present!! I've been in the 
>> hobby almost 56 years.. This is the best rig I've ever used.. I'm limited to 
>> a dipole here in sunny Florida after years of a big tower and large 
>> mono-band antennas But.. I gladly give them up for the nice sunny, warm 
>> weather..
>>  All I can say is It was worth the wait.. Best for the New Year.. 73.. 
>> Steve/k2we  Siesta Key, FL K4 #0492
>> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to g...@w2cs.org

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Elecraft Baseball Cap Not Great

[hawley, charles j jr]

I have gotten three of these. The first one fits and feels great…made in 
Bangladesh. 
The second one, too small…not enough crown and easily blows off my head in a 
mild breeze…made in China. 
The third one I bought hoping that the second one was an anomaly…but still 
shallow crown…made in China.
I really like the first hat, but my wife says I look homeless because it’s 
badly faded, etc.
I see that the hat now costs $5 more…kind of a lot to take another chance.
I gave the short crown hats to my wife.
Rats.

Chuck KE9UW
c-haw...@illinois.edu

Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] Re: [POSSIBLE SPAM] Re: Need K3 Board

[Dr. William J. Schmidt]

The number of parts zapped by a lightning strike is impossible to determine
in advance.  The more ground paths you have (USB cables, Aux cables, audio
cables, etc.) the higher the probability of higher part mortality count.
However, in every when only the USB cable was connected, I just had to
replace the TUSB2036 and the USBLC6-2 ESD protection packs.

Your mileage may vary... lightning of course.


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Ken K6MR
Sent: Saturday, November 27, 2021 1:49 PM
To: elecraft@mailman.qth.net
Subject: [POSSIBLE SPAM] Re: [Elecraft] [POSSIBLE SPAM] Re: Need K3 Board

On 11/27/2021 9:30 AM, Dr. William J. Schmidt wrote:
> I have the rework equipment in my RF lab to fix these boards and have done
so on many occasions (there are basically only two parts that can go bad on
the USB side... the ESD diode pack and the MAX-USB chip, both of which are
surface mount packs that can easily be removed).

I’ve only repaired two of these boards, but it was way more than two parts.
The ones I fixed had the hub, voltage regulator, switches, and one other
device get toasted.  All surface mount, so easy fix once the dead parts were
identified.  Cheap too, I think it was no more than $10 per board parts
cost.

Ken K6MR

From: David Gilbert<mailto:ab7e...@gmail.com>
Sent: Saturday, November 27, 2021 09:17
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: Re: [Elecraft] [POSSIBLE SPAM] Re: Need K3 Board


I think that's an excellent offer.  In the absence of Elecraft supporting
these older boards (as I stated in my first post, when I asked Elecraft to
repair my KIO3 they declined), it would be great if we could compile a small
database of people like yourself willing and able to do proper repair ...
for a reasonable fee, of course.

If somebody was willing to do this on a regular basis, I suspect that many
of us would be willing to simply donate older/excess boards.  I have a
couple that I would.

73,
Dave   AB7E


On 11/27/2021 9:30 AM, Dr. William J. Schmidt wrote:
> I have the rework equipment in my RF lab to fix these boards and have done
so on many occasions (there are basically only two parts that can go bad on
the USB side... the ESD diode pack and the MAX-USB chip, both of which are
surface mount packs that can easily be removed).  If you have bad KIO3B
boards, please sell them to those of us that can repair them and keep them
in stock for future needs.
>
>
> Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ 
> PJ2/K9HZ
>
> email:  b...@wjschmidt.com
>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to k...@outlook.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to b...@wjschmidt.com 


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] Re: [POSSIBLE SPAM] Re: Need K3 Board

[Dr. William J. Schmidt]

After working on some (not all) of the K3(s) boards myself, I suspect there 
will be a range of talents on different boards and equipment.  I've worked on 
the KIO3(B) boards, the KPA500 daughter card and power supply, and the KPA1500 
(all) so far with success.  Know my way around them very well... and know the 
symptoms and fixes.


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of David Gilbert
Sent: Saturday, November 27, 2021 11:16 AM
To: elecraft@mailman.qth.net
Subject: [POSSIBLE SPAM] Re: [Elecraft] [POSSIBLE SPAM] Re: Need K3 Board


I think that's an excellent offer.  In the absence of Elecraft supporting these 
older boards (as I stated in my first post, when I asked Elecraft to repair my 
KIO3 they declined), it would be great if we could compile a small database of 
people like yourself willing and able to do proper repair ... for a reasonable 
fee, of course.

If somebody was willing to do this on a regular basis, I suspect that many of 
us would be willing to simply donate older/excess boards.  I have a couple that 
I would.

73,
Dave   AB7E


On 11/27/2021 9:30 AM, Dr. William J. Schmidt wrote:
> I have the rework equipment in my RF lab to fix these boards and have done so 
> on many occasions (there are basically only two parts that can go bad on the 
> USB side... the ESD diode pack and the MAX-USB chip, both of which are 
> surface mount packs that can easily be removed).  If you have bad KIO3B 
> boards, please sell them to those of us that can repair them and keep them in 
> stock for future needs.
>
>
> Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ 
> PJ2/K9HZ
>
> email:  b...@wjschmidt.com
>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Need K3 Board

[Dr. William J. Schmidt]

It's definitely a multi-layer board, but the thing is so easily repaired, this 
is not necessary. 


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of jerry
Sent: Saturday, November 27, 2021 10:22 AM
To: David Gilbert 
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Need K3 Board

If one has the physical board in hand AND the schematic AND it's not an exotic 
or high speed board, it shouldn't be too hard.  I would hand enter the 
schematic into KiCAD then hand-place the parts.  Some things need to be placed 
precisely - mounting holes, others not so much.

KiCAD will keep you honest - although it doesn't have auto routing, it makes it 
easy to verify that everything is connected to what it must be connected to.

If the layout doesn't work out 2-layer, then I would go four-layer.

- Jerry KF6VB




On 2021-11-26 23:06, David Gilbert wrote:
> LOL.  I bet you don't even know if the board is multilayer or not. I 
> don't, and I'm not about to pull it out of the rig just to find out.
> 
> I had a KIO3 board go bad in the past and was lucky enough to be able 
> to replace it then.  Pretty certain I'm screwed if it happens again.
> 
> Dave   AB7E
> 
> 
> On 11/26/2021 11:37 PM, Ray wrote:
>> 
>> Its done Every Day.
>> 
>> Look at Russia and China !
>> 
>> Yes, it takes a very Special Skill set..
>> 
>> Ray WA6VAB K3
>> 
>> *From: *David Gilbert <mailto:ab7e...@gmail.com>
>> *Sent: *Friday, November 26, 2021 3:37 PM
>> *To: *elecraft@mailman.qth.net
>> *Subject: *Re: [Elecraft] Need K3 Board
>> 
>> Would you try to replicate that board from that schematic without 
>> having
>> 
>> access to the artwork for the board??  No frigging way.  It has to 
>> fit
>> 
>> into a fairly small space.
>> 
>> Dave   AB7E
>> 
>> On 11/26/2021 3:53 PM, Ray wrote:
>> 
>> > The schematic is Published, Check the Elecraft K3 site.
>> 
>> > Ray WA6VAB K3
>> 
>> >
>> 
>> >
>> 
>> __
>> 
>> Elecraft mailing list
>> 
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> 
>> Help: http://mailman.qth.net/mmfaq.htm
>> 
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> 
>> Please help support this email list: http://www.qsl.net/donate.html
>> 
>> Message delivered to wa6...@gmail.com
>> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> je...@tr2.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] Re: Need K3 Board

[Dr. William J. Schmidt]

I have the rework equipment in my RF lab to fix these boards and have done so 
on many occasions (there are basically only two parts that can go bad on the 
USB side... the ESD diode pack and the MAX-USB chip, both of which are surface 
mount packs that can easily be removed).  If you have bad KIO3B boards, please 
sell them to those of us that can repair them and keep them in stock for future 
needs.  


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of John Simmons
Sent: Saturday, November 27, 2021 8:05 AM
To: elecraft@mailman.qth.net
Subject: [POSSIBLE SPAM] Re: [Elecraft] Need K3 Board

It's called component level repair!

Back in the thermionic emission days it was common. Today you need 
magnification and sometimes a hot-air solder station but it can still be done.


--
73,
-de John NI0K in rural Debs, MN USA

David Gilbert wrote on 11/27/2021 1:06 AM:
>
> LOL. I bet you don't even know if the board is multilayer or not. I 
> don't, and I'm not about to pull it out of the rig just to find out.
>
> I had a KIO3 board go bad in the past and was lucky enough to be able 
> to replace it then.  Pretty certain I'm screwed if it happens again.
>
> Dave   AB7E
>
>
> On 11/26/2021 11:37 PM, Ray wrote:
>>
>> Its done Every Day.
>>
>> Look at Russia and China !
>>
>> Yes, it takes a very Special Skill set..
>>
>> Ray WA6VAB K3
>>
>> *From: *David Gilbert <mailto:ab7e...@gmail.com>
>> *Sent: *Friday, November 26, 2021 3:37 PM
>> *To: *elecraft@mailman.qth.net
>> *Subject: *Re: [Elecraft] Need K3 Board
>>
>> Would you try to replicate that board from that schematic without 
>> having
>>
>> access to the artwork for the board??  No frigging way.  It has to 
>> fit
>>
>> into a fairly small space.
>>
>> Dave   AB7E
>>
>> On 11/26/2021 3:53 PM, Ray wrote:
>>
>> > The schematic is Published, Check the Elecraft K3 site.
>>
>> > Ray WA6VAB K3
>>
>> >
>>
>> >
>>
>> __
>>
>> Elecraft mailing list
>>
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>
>> Help: http://mailman.qth.net/mmfaq.htm
>>
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>>
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>> Message delivered to wa6...@gmail.com
>>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> jasimm...@pinewooddata.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Fwd: Need K3 Board

[Dr. William J. Schmidt]

> 
> Reverse engineer it?  The schematics are readily available for it.  
> 
> I think fixing damaged nonworking boards os much easier.  So those who have 
> older nonfunctioning boards might think about selling them to those of us 
> that can fix them, thus having stock for the rest.  
> 
> 
> Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ
> 
> email:  b...@wjschmidt.com
>  
> 
>>> On Nov 26, 2021, at 7:33 PM, David Gilbert  wrote:
>>> 
>> 
>> Both of those reasons are bogus in my opinion.
>> 
>> For the first, a digital interface board is way down the list of what would 
>> be actual intellectual property.  There is no software or special circuitry 
>> such as an LPGA or similar) involved at all.
>> 
>> For the second, I sincerely doubt that Elecraft used some special capacitor 
>> or some tight tolerance part or an obsolete digital chip for a simple 
>> digital interface.  They simply wouldn't have needed to.  Most of the 
>> products that Elecraft has discontinued have nothing to do with unavailable 
>> parts ... other than delays due to supply chain issues.   They discontinued 
>> those products because they had limited human resources to maintain that 
>> breadth of product line.
>> 
>> I'd bet that it would be possible to reverse engineer the KIO3 boards, which 
>> based upon the number of posts here to the reflector are fairly high on the 
>> list of chance for failure ... it would just be far easier to have the parts 
>> list and board artwork to work with.  Elecraft has nothing to lose (and a 
>> lot to gain in terms of good will) by making those things available for 
>> extending the life of products they once promised we could always count on 
>> them for.
>> 
>> Dave   AB7E
>> 
>> 
>> 
>>> On 11/26/2021 3:07 PM, Jim Brown wrote:
>>>> On 11/26/2021 1:49 PM, Fred Jensen wrote:
>>>> Elecraft has a very significant investment in those data [often called 
>>>> Intellectual Property].  Can't really see them just giving it away.  
>>>> Likewise computer codes. I'm not at all surprised that they're holding 
>>>> their IP close to the chest.
>>> 
>>> More to the point, the reason Elecraft has stopped building certain 
>>> products is that key components are no longer available.
>>> 
>>> 73, Jim K9YC
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to b...@wjschmidt.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K2 advice needed - what to buy

[E J Martin]

Good morning.  I'd like to buy & make a K2 kit but would appreciate advice on 
what features to buy.  I'm a simple chap based in the UK. And after 50 years I 
now Only use CW on 40m with a straight key,   and I don't bother with contests 
as the morse is all autokeyers, keyboards, decoders, & 30wpm PFKeys.  No 
criticism intended it's the inevitable evolution of CW with technology.  I have 
a long wire resonant (SWR < 1.4) across the 40 band hence don't need an ATU. 
I've consigned my ICOM kit to a box in the attic and now use an early 
generation K2, battery powered, at 10W.  But I'd rather like to build a new K2. 
I'd need roofing filters etc for CW but Not SSB or anything else.   What would 
also be nice would be a panadapter but not sure how that would connect. Any 
advice/guidance would be much appreciated. ––– Ted M5UF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [POSSIBLE SPAM] sticky thermal pads for K3 LPA Mosfets

[Dr. William J. Schmidt]

Virtually anything will work.  It doesn't even have to be "sticky".  Just
use some heat transfer compound to stick a regular mica square to the
chassis.


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 



-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Ron Gorski
Sent: Friday, October 8, 2021 4:36 PM
To: elecraft@mailman.qth.net
Subject: [POSSIBLE SPAM] [Elecraft] sticky thermal pads for K3 LPA Mosfets

I need a description of the sticky thermal pads used between the K3 LPA
Mosfets and the bottom panel on the K3.

Specifically, I wish to know thermal conductivity and physical thickness. A
brand name and or vendor would be helpful.

Thanks for reading

Ron N9AU



--
This email has been checked for viruses by AVG.
https://www.avg.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to b...@wjschmidt.com 


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Plug on KPA-1500

[hawley, charles j jr]

I don't see a picture of your plug. Looking into the 6-20P  240 vac/ 20 amp 
plug with the ground pin up, it should have a vertical blade on the left and a 
horizontal blade on the right. Is that what your amp came with?

The 120 vac/20 amp plug, NEMA 5-20P,  has the blades reversed...horizontal 
blade on the left and vertical on the right. Is that what your plug is, or is 
the electrician just confused?




​Chuck Hawley
 c-haw...@illinois.edu

 Amateur Radio, KE9UW
 aka Jack, BMW Motorcycles
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KPA500 270V Failure

[Dr. William J. Schmidt]

YEP

 

 

Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

 

Moderator – North American QRO Group at Groups.IO.

 

email:   <mailto:b...@wjschmidt.com> b...@wjschmidt.com

 

 

From: Bruce Forsberg  
Sent: Saturday, July 24, 2021 11:10 PM
To: b...@wjschmidt.com
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA500 270V Failure

 

OK, I see what you're saying now. I might have 2 problems. 1 or more diodes in 
the PS board and the TR switching diodes. I will make the check you stated.

Thanks for the tip.

 

Bruce, WB6IZG

 

On Sat, Jul 24, 2021 at 9:03 PM Dr. William J. Schmidt mailto:b...@wjschmidt.com> > wrote:

Well my experience is that the supply doesn’t just die for no reason… 

 

 

Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

  

Moderator – North American QRO Group at Groups.IO.

 

email:   <mailto:b...@wjschmidt.com> b...@wjschmidt.com

 

 

From: Bruce Forsberg mailto:bruce.forsb...@gmail.com> > 
Sent: Sunday, July 25, 2021 5:55 AM
To: b...@wjschmidt.com <mailto:b...@wjschmidt.com> 
Cc: elecraft@mailman.qth.net <mailto:elecraft@mailman.qth.net> 
Subject: Re: [Elecraft] KPA500 270V Failure

 

Thanks for the reply but in my case the problem is the voltage multiplier 
circuit on the power supply PCB. I just disconnected the HV (~70V) and 270V 
lines so they did not go anywhere and the 270V line still only measures 85V.

 

Thanks

Bruce, WB6IZG

 

On Sat, Jul 24, 2021 at 8:36 PM Dr. William J. Schmidt mailto:b...@wjschmidt.com> > wrote:

Here it is.  From Elecraft technical support:  

Nominally:

TP2= RX 13.1 TX 0.8
TP4= RX 3.9 TX 13

From Rene Morris at Elecraft (great guy!).



Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

Moderator – North American QRO Group at Groups.IO.

email:  b...@wjschmidt.com <mailto:b...@wjschmidt.com> 


-Original Message-
From: Dr. William J. Schmidt mailto:b...@wjschmidt.com> > 
Sent: Saturday, July 24, 2021 10:35 PM
To: 'Bruce Forsberg' mailto:bruce.forsb...@gmail.com> >; 'elecraft@mailman.qth.net 
<mailto:elecraft@mailman.qth.net> '
mailto:elecraft@mailman.qth.net> >
Subject: RE: [Elecraft] KPA500 270V Failure

This happens a lot... search the forum for past msgs.  It's not the HV power
supply that is the problem.  That power supply powers the PIN diodes for TR
and RX... and it is more likely that the PIN diodes shot craps and shorted
the power supply.  There are two voltage Test Points "TP" on the board under
with the diodes and  you need to check the voltages on those test points.
That will tell you everything you need to know.  Will post the voltages when
I find them.


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

Moderator – North American QRO Group at Groups.IO.

email:  b...@wjschmidt.com <mailto:b...@wjschmidt.com> 



 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

 



-- 
This email has been checked for viruses by AVG.
https://www.avg.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KPA500 270V Failure

[Dr. William J. Schmidt]

Here it is.  From Elecraft technical support:  

Nominally:

TP2= RX 13.1 TX 0.8
TP4= RX 3.9 TX 13

>From Rene Morris at Elecraft (great guy!).



Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

Moderator – North American QRO Group at Groups.IO.

email:  b...@wjschmidt.com


-Original Message-
From: Dr. William J. Schmidt  
Sent: Saturday, July 24, 2021 10:35 PM
To: 'Bruce Forsberg' ; 'elecraft@mailman.qth.net'

Subject: RE: [Elecraft] KPA500 270V Failure

This happens a lot... search the forum for past msgs.  It's not the HV power
supply that is the problem.  That power supply powers the PIN diodes for TR
and RX... and it is more likely that the PIN diodes shot craps and shorted
the power supply.  There are two voltage Test Points "TP" on the board under
with the diodes and  you need to check the voltages on those test points.
That will tell you everything you need to know.  Will post the voltages when
I find them.


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

Moderator – North American QRO Group at Groups.IO.

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Bruce Forsberg
Sent: Sunday, July 25, 2021 4:31 AM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] KPA500 270V Failure

Today when using my KPA500 I switched it into operate mode from standby and
received an error message of 270V ERR. This is the first time I have seen
this error. I partially disassembled the amplifier and measured the 270V
voltage and it is 70V, which is close to what the HV voltage measured on the
front panel says. After finding some old outdated schematics on the internet
it looks like there is a diode capacitor voltage multiplier circuit that
takes the HV voltage of approx 70V and brings it up to 270V. I am assuming I
have lost one of the diodes in the chain.
Unfortunately Elecraft has used tiny diode packs and even put 2 of the 3
packs between electrolytic capacitors on the board, which I will have to
remove. Has anyone else seen this problem with their KPA500? And how did you
go about fixing this?

Thanks,
Bruce, WB6IZG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to b...@wjschmidt.com 


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KPA500 270V Failure

[Dr. William J. Schmidt]

This happens a lot... search the forum for past msgs.  It's not the HV power
supply that is the problem.  That power supply powers the PIN diodes for TR
and RX... and it is more likely that the PIN diodes shot craps and shorted
the power supply.  There are two voltage Test Points "TP" on the board under
with the diodes and  you need to check the voltages on those test points.
That will tell you everything you need to know.  Will post the voltages when
I find them.


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

Moderator – North American QRO Group at Groups.IO.

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Bruce Forsberg
Sent: Sunday, July 25, 2021 4:31 AM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] KPA500 270V Failure

Today when using my KPA500 I switched it into operate mode from standby and
received an error message of 270V ERR. This is the first time I have seen
this error. I partially disassembled the amplifier and measured the 270V
voltage and it is 70V, which is close to what the HV voltage measured on the
front panel says. After finding some old outdated schematics on the internet
it looks like there is a diode capacitor voltage multiplier circuit that
takes the HV voltage of approx 70V and brings it up to 270V. I am assuming I
have lost one of the diodes in the chain.
Unfortunately Elecraft has used tiny diode packs and even put 2 of the 3
packs between electrolytic capacitors on the board, which I will have to
remove. Has anyone else seen this problem with their KPA500? And how did you
go about fixing this?

Thanks,
Bruce, WB6IZG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to b...@wjschmidt.com 


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] denatured alcohol vs. Everclear

[Dr. William J. Schmidt]

Denatured alcohol is NOT wood alcohol.  Wood alcohol is METHANOL... it was
originally made by fermenting wood.  Denatured alcohol is ethanol (drinkable
alcohol) that has been purposely tainted/ spiked with a poison substance so
that it cannot be sold as drinkable alcohol.  Common denaturants are
methanol, gasoline, natural gasoline (pentane range hydrocarbons), etc. 


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Steve Hall
Sent: Saturday, July 17, 2021 1:41 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] denatured alcohol vs. Everclear

John NI0K,
Keep in mind that denatured alcohol and Everclear are absolutely two
different products.
Denatured or wood alcohol is most poisonous.  Whereas Everclear is grain
alcohol and can be consumed, (in moderation.) Steve WM6P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to b...@wjschmidt.com 


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] 99.9 % alcohol

[Dr. William J. Schmidt]

Isopropanol is never denatured because its not consumable by humans.  Only 
materials that are consumable are denatured, and that is usually done by adding 
natural gasoline (pentanes) to make it poison, and this is usually used in the 
fuel industry for blending with gasoline.  Ethanol (drinkable) is, indeed a 
maximum of 90% pure due to the azeotrope that is formed with ethanol and water 
that causes a pinch point and lack of ability to distill it into a more pure 
form.  Distilling above 90% can be done by adding a third substance to get 
around the Azeotropic pinch point, or by use of sieves to absorb water.


Dr. William J. Schmidt (one of my Ph.D. is in Chemical Engineering)



-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of John Marvin
Sent: Wednesday, July 14, 2021 7:00 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 99.9 % alcohol

Anything above 95% or so requires processes beyond just distillation, i.e. you 
are getting into the lab grade region. Prices usually go up significantly for 
that.

Of course, in many states you can buy 190 proof Everclear (95% grain
alcohol) at a liquor store.  Might be easier to find than lab grade alcohol.  
One advantage is that since it is not denatured, the fumes are significantly 
less toxic.

Since alcohol is hydrophilic, it helps to evaporate the water that makes up the 
rest of the alcohol mixture. I suspect that getting much above 90% doesn't 
yield significant improvement in evaporation time. But we obviously have 
examples here where using something higher than 90% would be more desirable if 
you are not spot cleaning and don't want to wait.

Regards,

John AC0ZG

On 7/14/2021 5:41 PM, brianpepperdine brianpepperdine wrote:
> I have no idea, obviously, what the USA market offers, but here we get 
> 99.9% (not 90%) isoprophyl alcohol. So much the better re. less residue of 
> course.
> Admittedly it was a bit hard to get at the beginning of the pandemic 
> but that seemed resolved with a couple months.
>
> Ages past I had to ask the pharmacist for it and he decanted it from a 
> large bottle behind the counter into a small bottle for me.
> He said you are either diabetic or into electronics, as I think that 
> was the main call for it. Largely they sold the smaller percentage 
> stuff for rubbing and sores.
> Here is is stocked on the shelf now already packaged, in the first aid 
> area (right next to the alcohol swabs).
>
> If hard to find you might ask your pharmacist.. its possible they have 
> it behind the counter for the real need purposes, or he can suggest if he can 
> order-in.
> You never know. I doubt at this time now that there is any real supply 
> shortage, IMHO"
>
> Brian VE3HI  Toronto
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> jm...@themarvins.org


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Elecraft Digest, Vol 207, Issue 6

[Pentti A J Pajunen]

YAW!
I didn't read more about this subject, but 10 seconds of keeping your 
finger on 100 degC. Try it if you like having blisters!


elecraft-requ...@mailman.qth.net kirjoitti 5.7.2021 klo 20.54:

Send Elecraft mailing list submissions to
elecraft@mailman.qth.net

To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/elecraft
or, via email, send a message with subject or body 'help' to
elecraft-requ...@mailman.qth.net

You can reach the person managing the list at
elecraft-ow...@mailman.qth.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Elecraft digest..."


Today's Topics:

1. Re: Generic words on temperature (David Woolley)
2. Re: K2 Only 30-metre Band Works (jerry)
3. Re: K2 Only 30-metre Band Works (Don Wilhelm)
4. SDR Technology (Geoffrey Feldman)
5.  K3 Transmit Issue (K5WA)
6. Re: Generic words on temperature (C.A. Jones)
7. Elecraft CW Net Announcement (kevin)
8. Re: K2 Only 30-metre Band Works (VA1CQ)
9. KPA-1500 Operating Temp (Mac Gray)
   10. K4 Key Out spec (cw4ev...@juno.com)
   11. K4 Key (cw4ev...@juno.com)
   12. Remoting an Elecraft K4 radio with N4PY Software (John K9UWA)
   13. KPA500 and excessive drive (Jim Weatherford)
   14. Re: KPA500 and excessive drive (Michael Walker)
   15. Re: Generic words on temperature (Francis Belliveau)
   16. Re: Generic words on temperature (Louandzip)
   17. Interconnecting KPA500 to KTA500 and ANAN7000dle (Dick Bingham)
   18. Re: Interconnecting KPA500 to KTA500 and ANAN7000dle (Jim Brown)
   19. Re: Interconnecting KPA500 to KTA500 and ANAN7000dle (Tom)
   20. Elecraft CW Net Report (kevin)
   21. K2s looking for a new home (Albin Stig?)
   22. Re: Interconnecting KPA500 to KTA500 and ANAN7000dle
   (Jack Brindle)
   23. Re: Interconnecting KPA500 to KTA500 and ANAN7000dle (Tom Berry)
   24. KX3 / PX3 / KPA100AT Station for Sale (AL7CR)
   25. Is the Krx3 plus Ksyn3a compatible with a K3s? (Paul GACEK)


--

Message: 1
Date: Sun, 4 Jul 2021 00:52:29 +0100
From: David Woolley 
To: "elecraft@mailman.qth.net" 
Subject: Re: [Elecraft] Generic words on temperature
Message-ID: 
Content-Type: text/plain; charset=windows-1252; format=flowed

100?F is well within the survivable body core temperature range, so it
should never trigger pain receptors.

In fact, I believe it was defined based on the nominal core body
temperature of a cow.

Did you mean 100?C?


--
73 & CU Pena, OH2G, OH2CG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] The next generation KAT500

[Dr. William J. Schmidt]

There are tuners that already do this.  The old RF-601 military tuner uses 
phase and magnitude data to resolve the transform between the transmitter and 
the antenna.  While it was before LCD displays, its easily adaptable.  In fact 
every tuner I've ever built (save novice days) has used this principle.  Its 
much easier to understand what the tuner is doing if you think in transform 
(Smith-chart) space.  Starting with the transform solution means also means you 
don't need to use the "hunt"/ "branch and bound" types of binary searches to 
find the tuners transform solution.  It’s a DUH if you think about it.  


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Al Lorona
Sent: Thursday, July 1, 2021 12:09 PM
To: Elecraft Reflector 
Subject: [Elecraft] The next generation KAT500

The recent thread on small and inexpensive vector network analyzers made me 
wonder if and when someone will make either a manual or automatic antenna tuner 
with something like one of those VNAs used as a front panel display. With the 
VNA in Smith Chart format, how cool would it be to tune the tuner and watch the 
antenna impedance move toward the center of the Smith Chart? The calibration 
coefficients of the VNA could be set at the factory and stored in EEPROM since 
they wouldn't change much over the life of the tuner other than some 
temperature and aging effects (but even the cal vs. temperature could be 
pre-measured at the factory).

To my knowledge all commercially available tuners simply display the measured 
SWR as a single number; providing a Smith Chart (or rectangular graph if you 
wish) swept over frequency would be a quantum leap in the information presented 
to the user.

Maybe if and when Elecraft decides to design the next generation of the KAT500, 
or maybe this has already been done and I don't know it?

Al  W6LX/4

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Giving Up

[Dr. William J. Schmidt]

Performance simply is not the issue here.

Elecraft has made a marketing decision to market one radio and it is priced
in the middle of the Ham-consumer pack with other radios with similar
performance.  They have opted to skip the entry-level market (like Icom with
the 7300 that you can get for basically $1000, and a range of radios at
different price points).  Many people can't pony up the $4,000+ for the new
(now) entry level Elecraft (no matter what the performance) and will go
elsewhere for their radios.  This is a different model than the entry level
K3 that initially started barely over $1,000.

That's what's up here... As Rob says in all of his talks... "Any of the
radios in the top 10+ are about the same in performance... you serve
yourself best buying one with the options that suit you".   Unless, of
course, you are a performance number chaser...


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

email:  b...@wjschmidt.com


 


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KPA500 receive loss

[Dr. William J. Schmidt]

I'm sure you could invent many ways to protect these parts (gas tubes, 
sacrificial TVS diodes, fusing, etc.).  The best way, of course, is to 
disconnect it (which of course I did not do).  These are low voltage parts on 
the receive side path so I don't know if a gas tube would be appropriate 
here...  Someone with more experience with them can chime in here.


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

email:  b...@wjschmidt.com


-Original Message-
From: CUTTER DAVID  
Sent: Saturday, June 5, 2021 10:46 AM
To: b...@wjschmidt.com; Elecraft Mail List 
Subject: Re: [Elecraft] KPA500 receive loss

Would a gas discharge tube save the sensitive parts?

David G3UNA


> On 05 June 2021 at 16:20 "Dr. William J. Schmidt"  wrote:
> 
> 
> This happened with my backup amp at the contest station on J6.  I left 
> it connected by accident overnight (too much rum) and we had some 
> static storms.  Took out the pin diodes (well, more accurately the 
> diodes that act like PIN diodes).  When put in operate, the receive 
> drops by 30+ dB but still transmits fine.  A simple replacement of the 
> four diodes and three (?) transistors solved the problem.  Dirt cheap.  
> You can make these measurements at the test-points to confirm:
> 
> 
> TP2= RX 13.1, TX 0.8
> TP4= RX 3.9, TX 13
> 
> 
> Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ 
> PJ2/K9HZ
> 
> email:  b...@wjschmidt.com
>


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KPA500 receive loss

[Dr. William J. Schmidt]

This happened with my backup amp at the contest station on J6.  I left it
connected by accident overnight (too much rum) and we had some static
storms.  Took out the pin diodes (well, more accurately the diodes that act
like PIN diodes).  When put in operate, the receive drops by 30+ dB but
still transmits fine.  A simple replacement of the four diodes and three (?)
transistors solved the problem.  Dirt cheap.  You can make these
measurements at the test-points to confirm:


TP2= RX 13.1, TX 0.8
TP4= RX 3.9, TX 13


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Andy Durbin
Sent: Saturday, June 5, 2021 8:20 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KPA500 receive loss

There was a similar report fairly recently.  I copied this to my KPA500
notes:

"Reported problem(s):
Receive signal is attenuated when in operate. Receive signal is normal when
in standby.

Problem(s) found:
Confirmed problem. Found that D8, D9 and R7 in the T/R circuit had failed.

Repair(s) performed:
Replaced D8, D9, and R7 on the LPF board."

I didn't record who posted this but I expect you will find this and similar
reports in the archive.

Here is another that may be related:

"Elecraft list May 1 2021:

I'm repairing a KPA500 for a friend that has the RX loss in standby mode.
After a time, he also lost receive in operate mode.  After doing a teardown,
I found the problem.

With the PA board removed, I checked K23A relay.  The normally closed
contact on the antenna side of the relay was open.  K23B was OK.  With relay
on the board, there was no safe way to energize the relay so I didn't check
the contacts on the normally open side. I also noticed that resistor R7 was
un-populate and pieces of it was stuck to bottom cover.

Looking at the PA schematic I came to the conclusion that the relay K23A was
also having problems on the operate position. With no or a poor connection
to the antenna, the 500-watt output voltage can go sky high. It can get
rectified by D9 and feed a high DC voltage through L4 and damage resistor R7
or even un-solder itself.

I replaced the relay and R7.  I remove the cover on the old relay and using
a 12v power supply, I set up bench test. With the relay energized, I
connected a Fluke meter in diode mode and it proved that the antenna
connection in operate mode was intermittent.


-
Jack WA9FVP"



73,
Andy, k3wyc
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to b...@wjschmidt.com 


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Manual Link Broken?

[Gary J Ferdinand]

THANKS.   Works like a champ.   

73/Gary W2CS



> On May 27, 2021, at 4:07 PM, Brian Broggie  wrote:
> 
> Please try again.
> 
> Our lightning fast web wizard has fixed it.
> 
> Brian Broggie
> K4 Program Manager  at Elecraft, Inc.
> Address  Watsonville, CA  
> Phone  (831) 763-4211  
> Mobile   (831) 601-6983  
> Email  br...@elecraft.com  <mailto:br...@elecraft.com>
> Website  www.elecraft.com  <http://www.elecraft.com/>
> 
> On Thu, May 27, 2021 at 12:13 PM Gary J Ferdinand  <mailto:g...@w2cs.org>> wrote:
> I’m trying to access the “K4 Operating Manual” on the K4 support page on the 
> Elecraft.  I get a page not found.  Is there an alternate link?
> 
> Tnx.
> 
> Gary W2CS
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft 
> <http://mailman.qth.net/mailman/listinfo/elecraft>
> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm>
> Post: mailto:Elecraft@mailman.qth.net <mailto:Elecraft@mailman.qth.net>
> 
> This list hosted by: http://www.qsl.net <http://www.qsl.net/>
> Please help support this email list: http://www.qsl.net/donate.html 
> <http://www.qsl.net/donate.html>
> Message delivered to br...@elecraft.com <mailto:br...@elecraft.com>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K4 Manual Link Broken?

[Gary J Ferdinand]

I’m trying to access the “K4 Operating Manual” on the K4 support page on the 
Elecraft.  I get a page not found.  Is there an alternate link?

Tnx.

Gary W2CS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] k3 STEPPIR 6Meters

[Dr. William J. Schmidt]

There is always an ongoing discussion about this in the SteppIR forum on
groups.io.  The key to making the SteppIR antennas anything more than
pathetic on 6M is adding a fixed reflector.  Some in the group have modeled
and developed 6M antennas on the same boom that rival commercial monobanders
on the same length using only the original driven element as being
adjustable. 


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 


-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Joe Subich, W4TV
Sent: Sunday, May 2, 2021 7:42 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] k3 STEPPIR 6Meters

On 2021-05-02 3:59 AM, turnbull wrote:> Dear OMs and YLs,I believe if you
check online there is a
> modification to mounting the additional parasitic element possibly 
> even adding yet another which is supposed to greatly improve the three 
> element SteppIR six meter performance over that of the three element 
> with the single parasitic element.
That modification is by GM3SEK (about 2015).  I believe is was in one of the
UK publications.  In any case, Doug is correct, the modification adds both a
director and reflector turning the 3 element SteppIR into a proper four
element yagi on a 12.5 foot boom.

73,

... Joe, W4TV


On 2021-05-02 3:59 AM, turnbull wrote:
> Dear OMs and YLs,I believe if you check online there is a modification 
> to mounting the additional parasitic element possibly even adding yet 
> another which is supposed to greatly improve the three element SteppIR 
> six meter performance over that of the three element with the single 
> parasitic element.As I have a four element SteppIR, this has not been 
> tried here.Worth investigating.73 Doug EI2CNSent from my Galaxy


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to b...@wjschmidt.com 


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Dummy Load with integral digital wattmeter

[hawley, charles j jr]

I have one. I like it, but I was thinking more of a test unit.
Dummy load with integral digital meter (digits preferred instead of LEDs)..
To make one out of a W2 would require a W2, that after market KV5J digital 
readout or a computer, and the directional coupler. Lots of stuff and wires.
But maybe if I found a stand alone digital wattmeter I could fasten it to a 
dummy load...that's a thought.

Chuck Hawley
 c-haw...@illinois.edu

 Amateur Radio, KE9UW
 aka Jack, BMW Motorcycles


From: Jack Brindle 
Sent: Friday, April 30, 2021 3:50 PM
To: hawley, charles j jr 
Cc: elecraft@mailman.qth.net 
Subject: Re: [Elecraft] Dummy Load with integral digital wattmeter

Have you looked at the Elecraft W2?

https://elecraft.com/products/w2<https://urldefense.com/v3/__https://elecraft.com/products/w2__;!!DZ3fjg!qXURJbbL1PqkaGaQGRUvMoMfFuds4479KRvkzFwZGcm4UK5lJ0eexSbFJ813fvOTsn32$>

73!
Jack, W6FB


On Apr 30, 2021, at 1:38 PM, ke9uw 
mailto:c-haw...@illinois.edu>> wrote:

I have recently built a GRPoMeter which has a 16 Watt dummy load with a
digital SWR/Wattmeter in it. It’s great...but only reads up to about 14
Watts.
I would like a similar dummy load meter with a digital meter that reads say
0-10, 0-100, and 0-1000 watts full scale. I like and use the Elecraft 500
watt amp and tuner, so 1000 watts full scale would be perfect..
Too much to ask for. 0-2000 would be acceptable if it had the 3 ranges.
Definitely not  single range analog meters like MFJ and Palstar have
Anyone know of a product like this?

Chuck KE9UW



-
Chuck, KE9UW
--
Sent from: 
http://elecraft.365791.n2.nabble.com/<https://urldefense.com/v3/__http://elecraft.365791.n2.nabble.com/__;!!DZ3fjg!qXURJbbL1PqkaGaQGRUvMoMfFuds4479KRvkzFwZGcm4UK5lJ0eexSbFJ813fo3A709Q$>
__
Elecraft mailing list
Home: 
http://mailman.qth.net/mailman/listinfo/elecraft<https://urldefense.com/v3/__http://mailman.qth.net/mailman/listinfo/elecraft__;!!DZ3fjg!qXURJbbL1PqkaGaQGRUvMoMfFuds4479KRvkzFwZGcm4UK5lJ0eexSbFJ813fmLawEcn$>
Help: 
http://mailman.qth.net/mmfaq.htm<https://urldefense.com/v3/__http://mailman.qth.net/mmfaq.htm__;!!DZ3fjg!qXURJbbL1PqkaGaQGRUvMoMfFuds4479KRvkzFwZGcm4UK5lJ0eexSbFJ813fuO2JVJj$>
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: 
http://www.qsl.net<https://urldefense.com/v3/__http://www.qsl.net__;!!DZ3fjg!qXURJbbL1PqkaGaQGRUvMoMfFuds4479KRvkzFwZGcm4UK5lJ0eexSbFJ813fsvNj9xl$>
Please help support this email list: 
http://www.qsl.net/donate.html<https://urldefense.com/v3/__http://www.qsl.net/donate.html__;!!DZ3fjg!qXURJbbL1PqkaGaQGRUvMoMfFuds4479KRvkzFwZGcm4UK5lJ0eexSbFJ813ftj1mCdf$>
Message delivered to jackbrin...@me.com<mailto:jackbrin...@me.com>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] FW: Elecraft K3/P3 last-time order

[Dr. William J. Schmidt]

Yes.  And the salient part of this is that I missed the email about taking 
deposits…  When did it go out?

 

 

Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

 

Moderator – North American QRO Group at Groups.IO.

 

email:   <mailto:b...@wjschmidt.com> b...@wjschmidt.com

 

 

From: Robie Elms  
Sent: Tuesday, April 20, 2021 10:37 AM
To: b...@wjschmidt.com
Cc: Elecraft Mail List 
Subject: Re: [Elecraft] FW: Elecraft K3/P3 last-time order

 

Bill,

 

They are taking deposits now.

 

Robie - AJ4F

 

On Tue, Apr 20, 2021 at 10:34 AM Dr. William J. Schmidt mailto:b...@wjschmidt.com> > wrote:

I must have missed that email...??  and I wondered when they would start
taking orders for the upgrades.  Anyway take note if you still want K3/K3s
parts before they are gone!


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

Moderator – North American QRO Group at Groups.IO.

email:  b...@wjschmidt.com <mailto:b...@wjschmidt.com> 


-Original Message-
From: elecraft-boun...@mailman.qth.net 
<mailto:elecraft-boun...@mailman.qth.net>  mailto:elecraft-boun...@mailman.qth.net> > On
Behalf Of Geert Jan de Groot
Sent: Tuesday, April 20, 2021 5:13 AM
To: elecraft@mailman.qth.net <mailto:elecraft@mailman.qth.net> 
Subject: [Elecraft] Elecraft K3/P3 last-time order

I received a mail from Elecraft sales pointing to
https://elecraft.com/pages/k3-k3s-options

This is the next step for the last-time K3/P3 order - order what you want
now or forget it!

Judging by the questions on list many people will still want to order
something - this is the last chance..

73,

Geert Jan PE1HZG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net <mailto:Elecraft@mailman.qth.net> 

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to b...@wjschmidt.com <mailto:b...@wjschmidt.com>  


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net <mailto:Elecraft@mailman.qth.net> 

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rule...@gmail.com <mailto:rule...@gmail.com>  

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] FW: Elecraft K3/P3 last-time order

[Dr. William J. Schmidt]

I must have missed that email...??  and I wondered when they would start
taking orders for the upgrades.  Anyway take note if you still want K3/K3s
parts before they are gone!


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

Moderator – North American QRO Group at Groups.IO.

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Geert Jan de Groot
Sent: Tuesday, April 20, 2021 5:13 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Elecraft K3/P3 last-time order

I received a mail from Elecraft sales pointing to
https://elecraft.com/pages/k3-k3s-options

This is the next step for the last-time K3/P3 order - order what you want
now or forget it!

Judging by the questions on list many people will still want to order
something - this is the last chance..

73,

Geert Jan PE1HZG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to b...@wjschmidt.com 


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] MC-60A

[M J K]

I have been running a MC-60A on my K3s  great results. Just recently
switched to a Heil  PR-781 on a boom

On Fri., Apr. 2, 2021, 2:39 p.m. Steve Fox,  wrote:

> Do I need to make any modifications to use an MC-60A microphone with a K3?
>
> Thanks
> Steve
> KA4FOX
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to va3...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Where are the K4 reviews?

[Dr. William J. Schmidt]

You might try the "K4-Elecraft"  group...  


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of W0MU Mike Fatchett
Sent: Tuesday, March 30, 2021 3:33 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Where are the K4 reviews?

It is puzzling to see the lack of substantive information as other have posted. 
 This has not been how Wayne and Eric and Elecraft have operated in the past.

I don't believe it is asking too much for regular updates on delivery dates.

Just because some are not happy with a delay does not mean that tehy don't want 
the product.  This radio is a lot of money for many people. I doubt they are 
doing so well that they can afford to chase off a portion of their business.  
It cost far more to bring in new customers than it does to keep old ones.

W0MU





On 3/30/2021 2:18 PM, Hal Massey wrote:
> David,
>
> Is the customer set you are referring to and claiming to be sympathetic too 
> even in existence? Elecraft will refund money to anyone that asks. Wouldn’t 
> those that can’t have their money tied up have pulled out by now? Wouldn’t 
> those that are upset with the communications be gone by now??
>
> Regards
> -Hal
>
>> On Mar 30, 2021, at 10:51 AM, David Gilbert  wrote:
>>
>>
>> As the kids say, "cool story, bro."
>>
>> None of it changes the fact that lots of people have put out a lot of money 
>> with almost zero visibility into when they will get their product, and the 
>> K4 situation doesn't have the significantly leveraged upside that your story 
>> did.  There isn't the same risk/reward ratio here that your example had.  
>> Apples and potatoes.
>>
>> There are lots of reasons why Elecraft could be granted some slack for major 
>> and repeated delays in shipping the K4, but the part I don't understand is 
>> the almost total absence of regular communication on the delivery status.  
>> It makes no sense at all.  If Wayne can find the time to tell us about his 
>> latest pedestrian mobile contact he should be able to tell his investors 
>> where the company stands on actually producing the product that they paid 
>> for.
>>
>> I'm just an interested observer here since I haven't ordered a K4, but that 
>> doesn't change the fact that I sympathize with those who did.
>>
>> Dave  AB7E
>>
>>
>>
>> On 3/30/2021 8:55 AM, Lyn Norstad wrote:
>>> I can’t imagine how it would feel to know that I had laid out $4k two years 
>>> ago, and still be waiting for fulfillment.  NO, actually I can.
>>>
>>>   
>>> Several years ago, an up-and-coming system integration business I had been 
>>> associated with for several years (as a VAR) was going thru many of the 
>>> same types of growing pains in bringing a wonderful new product to market.  
>>> The CEO vowed he would run the business as if they were broke, which they 
>>> very nearly were.  But the employees were faithful believers in the company 
>>> and the product, and worked very hard to make it a success.
>>>
>>>   
>>> Early one Monday morning, I had a call from that CEO advising me that they 
>>> had sold the company to another industry player (a non-competitor) and that 
>>> they wanted me to join them for lunch to discuss the deal. My fear and 
>>> trepidation slowly disappeared that day as I met the new management “team” 
>>> (with all the old R team still hard at work), got viable answers to all 
>>> the hard questions and quickly recognized how an immediate cash infusion 
>>> ($10 Million) had an amazing ability to totally turn things around, grease 
>>> the wheels, and create an industry shakeup that precipitated a wave of 
>>> further consolidation and rapid development.
>>>
>>>   
>>> It was a win-win situation born out of the impending potential disaster we 
>>> had all feared.
>>>
>>>   
>>> Hang in there.  Times might seem tough, but there are some very smart 
>>> people at work here.
>>>
>>>   
>>> 73
>>>
>>> Lyn, W0LEN
>>>
>>>   
>>> From: elecraft...@groups.io [mailto:elecraft...@groups.io] On Behalf Of Ted 
>>> Roycraft
>>> Sent: Monday, March 29, 2021 4:44 PM
>>> To: elecraft...@groups.io
>>> Subject: Re: [Elecraft-K4] Where are the K4 reviews?
>>>
>>>   
>>> The natives are getting restless and it would be good to hear something 
>>> official from Elecraft.  It's been too long since we've heard much of 
>>> anything.  I would like to know if I can expect my Group 1 order, submitted 
>>> on August 8, 2019, has any chance of getting to me before summer, 2021 
>>> begins or is it likely that I will have to wait another year.  I could have 
>>> asked much the same question a year ago never expecting that a year from 
>>> then, there would still be no K4 sitting on my table by now.  By the way, 
>>> when I submitted my order the expected shipping date was estimated to be 
>>> November or December, 2019. That's pre-pandemic.
>>>
>>> 73, Ted, W2ZK
>>>
>>> __
>>> Elecraft mailing list
>>> Home: 

Re: [Elecraft] March/April NCJ

[Dr. William J. Schmidt]

I had a similar thing happen after purchasing an antenna switch of well-known 
brand.  I didn't try the switch before it went to the top of the tower but I 
quickly found that one position had a bad relay.  I was able to use another 
position to get the thing working.  I posted on eHam and rated it below average 
in quality because I expected a switch... something so simple... to work out of 
the box.  I quickly received an email from the manufacturer berating me, 
suggesting it was my fault for the switch failing for being just another dumb 
ham (yes, for a simple 12V switch), and that my review would "ruin his 
business".  This went on for some time, but I did not bend to such rude tactics 
in favor of the truth.  I also commented that the kick-back diodes were, in my 
opinion, at tower end where they are not easily serviceable after static 
discharge (this was not the problem causing the box to fail).

Evidently this has become common-place.


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

email:  b...@wjschmidt.com


-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Wes
Sent: Saturday, March 13, 2021 12:53 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] March/April NCJ

I bought a European made tri-band Yagi antenna from a friend who had never 
installed it. (I won't mention the manufacturer)  It was still in the unopened 
box after sitting in my friend's garage for some time.  The pieces of tubing 
were shipped inside each other (graduated metric sizes have a lot of clearance 
between sizes) and when I extracted them all I found two pieces for the same 
element were very corroded.  I used my household lye/vinegar method to clean 
them up and assembled the antenna. It worked fine and I decided to write an 
eHam review.

Based on the QC issue I rated it a four stars. I almost immediately got an 
email from the company in which I was accused of improperly storing the antenna 
and all sorts of other things.  It was also claimed that anything less that 
five stars would ruin their business, etc.  I sent photos of the tubing and 
heard back that this was impossible, it's never happened before and so on and 
so forth.  I got so much grief about this that I wrote the reviews people at 
eHam and asked them to pull my review, which they did.

Wes  N7WS

On 3/13/2021 10:37 AM, David Gilbert wrote:
>
> I agree that a preponderance of 5 ratings are from people 
> congratulating themselves on their choice, and the text often goes 
> like "this is a fine rig" or "met all my expectations."
>
> And out of roughly 2,200 eHam ratings I once profiled just for grins, 
> almost all of the ratings of 1 star or 2 stars were for service or support 
> issues ...
> which tells you nothing about the rig itself.
>
> I also agree about the need to look for trends in the comments to find 
> any worthwhile insight ... which is why the NCJ article that used only 
> the summary average ratings is borderline useless to me.
>
> 73,
> Dave  AB7E

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to b...@wjschmidt.com 


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Suggested Enhancement for KPA-1500

[Dr. William J. Schmidt]

I use my KPA1500 for contesting... and it's never hot... but I do worry
about the fans wearing out.  At one point I asked Elecraft if they had a
"Fan Kit" for it that I could keep in stock here in the Caribbean just in
case one went south in the middle of a contest...


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

email:  b...@wjschmidt.com
 


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K2 REVISED LCD and BACKLIGHT ASSEMBLY

[hawley, charles j jr]

I see there is a new backlight for the K2. I wonder why, and is this better 
than the original back in 2000. How difficult iis it to replace in a finished 
K2?


Chuck Hawley
 c-haw...@illinois.edu

 Amateur Radio, KE9UW

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] TX Gain Calibration Fails on 6 meters

[David J. Schmocker]

Hello, K3S. S/N 11532 K3 Utility running on Mac OS 10.14.6 Mojave

I found that running Transmitter Gain utility requires these settings within
K3S Config menu to enable test to pass (with good 50 Ohm load on both ANT1
and XVTR-Out ports): 

Transmitter Gain tests: 
5W test.  requires Config - XVTR -  OFF
50W test requires Config - XVTR -  OFF
mW test requires Config - XVTR - ON.  

I suppose this makes sense (turn the transporter on for the mW test which is
used to drive the Transverter). 

73,
Dave KJ9I




--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K2 upgrade notes not found on Elecraft site...

[hawley, charles j jr]

I’m not finding the several firmware upgrade notes. I see where you can buy the 
new firmware chip, but not finding why you would want to.
I have noticed that the Elecraft site somehow has info, but sometimes it is 
difficult to find it...or it’s no longer there. Don’t like to see the latter.

Chuck KE9UW
c-haw...@illinois.edu

Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] FW: Sudden KpA1500 power reduction

[Dr. William J. Schmidt]

I've had the KPA1500 at my contest station in the Caribbean go south on me
(and another contest group) twice.  Both times I was able to get Rene on the
phone.. go through the amp... and troubleshoot it over the phone.  They have
always shared parts of the schematic with me when necessary.  It's nothing
secret... just not publically posted. 

Big shout out to Rene at Elecraft... Excellent tech.


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 



-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Ken K6MR
Sent: Sunday, February 21, 2021 1:11 PM
To: Dana Roode K6NR 
Cc: Elecraft Reflector 
Subject: Re: [Elecraft] Sudden KpA1500 power reduction

It wouldn't be above your skill level if they would release the schematics.
Solid state amps are not any more complicated than tube amps, and I think
easier (and safer!) than tubes.  My early KPA1500 (#76) has been great, but
not having the schematics really bugs me.  I know everyone at Space Galactic
Headquarters is busy with the K4 but posting the KPA1500 schematics would
not take more than a few minutes.  And my amp is way out of warranty so they
aren't risking anything.  Internally it looks like a pretty generic design.
I've reverse engineered the power supply unit but the RF deck is going to
take some time.  I'd rather not if I don't have to.

Ken K6MR

 


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] My THIRD Elecraft Hat

[hawley, charles j jr]

I just received my third Elecraft hat. It fits perfectly...just like my first 
Elecraft hat. When I got the second hat, it didn’t seem to fit properly. Kind 
of seemed short of coming all the way down on my head. I compared it to the 
first hat and it seemed the same, but just didn’t fit right. Didn’t come down 
all the way and feel secure.
This third hat is great.
So if you get a funny hat after you order another hat because of kinda wearing 
out your first hat...my wife was gonna burn my first faded and sweat lined 
hat...said I looked homeless in it...just keep ordering them until you get a 
good one.
I’m so psyched...I may just order a K4 now...a third rig...to set next to the 
K3es.

Jack BMW Motorcycles
Chuck KE9UW
c-haw...@illinois.edu

Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Can I rent a K4?

[Dr. William J. Schmidt]

I have some experience on this topic because I rent out my Elecraft
equipment at my contest station in the Caribbean (J68HZ).  I have to treat
it strictly as a business investment. setting the price for rental at what I
would have to expect to replace all of the equipment every 5-10 years
depending upon what it is. and a little more for breakage in between.  Of
course its discounted by my usage as well, but I can tell you it isn't
exactly cheap.  However the program is well thought out and it can be done.
I can't do the remote station thing on St. Lucia because its not permitted
by their version of the FCC rules.

 

 

Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

email:   <mailto:b...@wjschmidt.com> b...@wjschmidt.com

 

 



-- 
This email has been checked for viruses by AVG.
https://www.avg.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 specs

[hawley, charles j jr]

Ahh...

Chuck Hawley
 c-haw...@illinois.edu

 Amateur Radio, KE9UW
 aka Jack, BMW Motorcycles


From: Grant Youngman 
Sent: Monday, January 18, 2021 8:29 AM
To: hawley, charles j jr 
Cc: Elecraft Refl 
Subject: Re: [Elecraft] K4 specs

Wayne said they’d get it posted this morning.  It’s only 6:30am in CA.  GIve 
‘em some time for a final read through, and to put it up :-)

Grant NQ5T

> On Jan 18, 2021, at 9:26 AM, ke9uw  wrote:
>
> Page 40 is blank. Says (In Progress)
>
>
>
> -
> Chuck, KE9UW
> --
> Sent from: 
> https://urldefense.com/v3/__http://elecraft.365791.n2.nabble.com/__;!!DZ3fjg!vWXMwCkkhlBe4pHd0xIKIQJFQhGjnbCVHRdqpXkz6AvVNNWK62nLxvYQLywqpvF7DX1o$

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Genius vs. Stupidity

[Pentti A J Pajunen]

YAW!
Equipments (Goes for Rx:es & TX:es) Has to be so simplified that they 
still work, but not simplier. Happy rest of the year 21.


73

Penna, OH2G

elecraft-requ...@mailman.qth.net kirjoitti 26.12.2020 klo 19.06:

Send Elecraft mailing list submissions to
elecraft@mailman.qth.net

To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/elecraft
or, via email, send a message with subject or body 'help' to
elecraft-requ...@mailman.qth.net

You can reach the person managing the list at
elecraft-ow...@mailman.qth.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Elecraft digest..."


Today's Topics:

1. Re: Genius vs. Stupidity (Joseph Shuman)
2. Re: Genius vs. Stupidity (Clay Autery)
3. Re: Genius vs. Stupidity (Harry Yingst)
4. Re: Genius vs. Stupidity (Fred Jensen)
5. KPA500 Bypass Power Limit? (eric norris)
6. Re: Genius vs. Stupidity (Wes)
7. Re: Elecraft Accessories (ws6x@gmail.com)
8. Re: Genius vs. Stupidity (Alan - G4GNX)
9. Re: K4 Status Update (VE3GNO Daniel)
   10. Re: KPA500 Bypass Power Limit? (Michael Walker)
   11. Re: KPA500 Bypass Power Limit? (Eric Norris)
   12. Re: Genius vs. Stupidity (Clay Autery)
   13. Re: KPA500 Bypass Power Limit? (Harry Yingst)
   14. KPA500 Bypass Power Limit? (Andy Durbin)
   15. Re: KPA500 Bypass Power Limit? (Adrian)
   16. Re: KPA500 Bypass Power Limit? (Jim Brown)
   17. K3S Birdy on 28MHz (Conrad PA5Y)
   18. Re: K3S Birdy on 28MHz (Conrad PA5Y)
   19. Re: Genius vs. Stupidity (Art Peters)
   20. KX3 sideband cancellation calibration (Steve Zabarnick)
   21. KX3 firmware issue? (Dave B)
   22. Re: Genius vs. Stupidity (E.H. Russell)


--

Message: 1
Date: Fri, 25 Dec 2020 18:28:17 -0500
From: Joseph Shuman 
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Genius vs. Stupidity
Message-ID: 
Content-Type: text/plain;   charset=utf-8

Something like the following was attributed to Albert:

?There is a question that makes me hazy,
Is it you, or I, that is crazy?

I worked at a DOE research lab many years ago for someone who met and spoke 
with Einstein.  My boss asserted that, after talking to Einstein, he knew who 
was crazy.  Never told me who, though. . .

Keeping Watch-
shu

Joe Shuman, NZ8P

--

Message: 2
Date: Fri, 25 Dec 2020 18:10:13 -0600
From: Clay Autery 
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Genius vs. Stupidity
Message-ID: <6fea4b0c-8924-152d-6886-494c02a79...@montac.com>
Content-Type: text/plain; charset=utf-8; format=flowed

MANY higher-intelligence folks APPEAR to be "insane" to other folks
falling higher up on the bell curve.
I am in no way anywhere nearly as intelligent as the Professor, but have
had any number of encounters in my 57 years where either the "look" or
the actual words from the person with whom I was interacting clearly
communicated that they thought I was "insane".

"I'm not crazy; my mother had me tested!"? - Sheldon Cooper, Big Bang
Theory? 

__
Clay Autery, KY5G
(318) 518-1389

On 12/25/20 17:28, Joseph Shuman via Elecraft wrote:

Something like the following was attributed to Albert:

?There is a question that makes me hazy,
Is it you, or I, that is crazy?

I worked at a DOE research lab many years ago for someone who met and spoke 
with Einstein.  My boss asserted that, after talking to Einstein, he knew who 
was crazy.  Never told me who, though. . .

Keeping Watch-
shu

Joe Shuman, NZ8P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k...@montac.com


--

Message: 3
Date: Sat, 26 Dec 2020 00:21:45 + (UTC)
From: Harry Yingst 
To: "elecraft@mailman.qth.net" ,  Clay
Autery 
Subject: Re: [Elecraft] Genius vs. Stupidity
Message-ID: <1013094879.4450910.1608942105...@mail.yahoo.com>
Content-Type: text/plain; charset=UTF-8

  It all depends on where you are on the curve.




 On Friday, December 25, 2020, 07:11:43 PM EST, Clay Autery 
 wrote:
  
  MANY higher-intelligence folks APPEAR to be "insane" to other folks

falling higher up on the bell curve.
I am in no way anywhere nearly as intelligent as the Professor, but have
had any number of encounters in my 57 years where either the "look" or
the actual words from the person with whom I was interacting clearly
communicated that they thought I was "insane".

"I'm not crazy; my mother had me tested!"? - Sheldon Cooper, Big Bang
Theory? 

__
Clay Autery, KY5G
(318) 518-1389

On 12/25/20 17:28, Joseph Shuman via Elecraft wrote:

[Elecraft] K Pod switch replacement or fix?

[hawley, charles j jr]

I’ve been wondering as I contemplate replacing at least two of the push button 
switches, if there is a more permanent fix.
The schematic is available on the Elecraft website.
What do you think of installing say a 10K pull-up resistor from the 3 vdc buss 
to each of the switch outputs. I wonder if that would stabilize the inputs. It 
seems like the issue is no-current switching making the contact noisy after 
repeated use. 10 K doesn’t seem like much of a current to help, but that and 
maybe the presence of a load would reduce the noise to the pic processor. 

Chuck KE9UW
c-haw...@illinois.edu

Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Keyboard plugged into the P3 SVGA works but...

[hawley, charles j jr]

I asked the question how do you type live and send CW, and got the answer about 
the Menu set to VOX.
That works now but it doesn't work in SSB to automatically offset and send out 
CW like with paddles plugged into the K3.
Is this not possible with the keyboard and SVGA?

Chuck Hawley
 c-haw...@illinois.edu

 Amateur Radio, KE9UW
 aka Jack, BMW Motorcycles
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KEYBOARD Plugged into P3 SVGA...can't type out live.

[hawley, charles j jr]

I can type into the transmit buffer and with ctrl T, transmit the CW. But with 
the VOX turned on in the K3s, the typing doesn't go out as I type, but fills up 
the buffer. I still have to hit ctrl T to transmit.
Am I missing something that needs to be turned on or off?

Chuck Hawley
 c-haw...@illinois.edu

 Amateur Radio, KE9UW
 aka Jack, BMW Motorcycles
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] P3 Transmit Display Failure

[hawley, charles j jr]

I have a reoccurring issue with the P3 display of the transmit cw display. 
Occasionally, the P3 doesn't display the TX waveform ( I have never noticed if 
this happening on SSB...probably not since I have never had to fix it). The fix 
is loading a config file stored when the problem was not happening.
I have tried to store a config file when it was happening just to see and then 
restore using that file. What happens then is the P3 display locked up with a 
dit and could not be unlocked.
After this test, I had to turn off the K3s and unpower the P3, restore power 
and turn the K3s on, and restore with a copy of the config which was taken when 
the display was showing transmit cw.
I'm thinking stray RF somehow causing this but never happened on SSB...and I 
have no clue what is getting flipped in the rig or P3 to have this happen.
Since I can restore the config and fix it, I guess I'm mostly curious why it's 
happening, any ideas?

Chuck Hawley
 c-haw...@illinois.edu

 Amateur Radio, KE9UW
 aka Jack, BMW Motorcycles
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Flashover in linear amp fed w. K3

[Pentti A J Pajunen]

Hello Elecrafters!
Happened one day when tested Drake L4, that there was a loud bang in the 
linear causing electrical shutdown in both, the linear and the K3. Now 
seems that the K3 refuses of any output, RX normal. Hopefully the cause 
is only corrupted firmware, still having a fear for damaged transmiiting 
cirquits. No PA output no output when the PA is deactivated. Bricked?


--
73 & CU Penna, OH2G, OH2CG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K-POD Button Switches Intermittently triggering the wrong macro

[hawley, charles j jr]

The switches are surface mount and quite sealed. The surface mount on them is 
not a problem the way they are soldered in. But ultimately, it seems like 
Elecraft needs to replace them as to brand, model, in their production if they 
haven’t already done so. 
When I called for replacing pod number 2, I was told that this was extremely 
rare and even not likely for someone to have two of them go this way. But with 
a little persistence they sent me my third one. I think they are getting old in 
the tooth now, so we should see more “rare” failures ahead. As of right now, 
replacing the pc board for $120 is probably the way to go, with the hope that 
the switches are a more reliable sort.
I, so far, went the way of just switching my most used macros to relatively 
unused switches. Good for another almost year I hope.

Chuck KE9UW
c-haw...@illinois.edu

Sent from my iPad

> On Nov 6, 2020, at 4:32 PM, Ken  wrote:
> 
> I have had this problem for years also and wonder if there is any way to 
> clean the switches?  It is a real spoiler when it pulls this stunt, seemingly 
> always when chasing some great dx.  Would love to know what really is going 
> on with this along with a good “fix”. 
> 
> Ken, NU4I 
> 
> Sent from my iPod
> 
>> On Nov 6, 2020, at 14:20, Steve Lund  wrote:
>> 
>> Let me know your solution as my KPOD has the same problem.
>> 
>> The buttons on the K3 always work as expected, but the KPOD buttons don't.
>> A real pain in cw pileups.
>> 
>> Steve, K6UM
>> 
>>> On Fri, Nov 6, 2020 at 3:55 PM hawley, charles j jr 
>>> wrote:
>>> 
>>> I posted this on Elecraft .io but will try here as well...
>>> 
>>> I love this K-Pod, BUT I’ve sort of worn out 3 of them. The symptom is
>>> that the most used buttons get noisy and trigger another macro from another
>>> address. When I had the first one do that, I did extensive testing to
>>> eliminate rf noise, etc.
>>> And a new unit however proved to work perfectly...for about 4 months. When
>>> it started doing the same thing Elecraft said it was highly unlikely and
>>> especially twice to the same guy, but they sent me another one anyway.
>>> Great company!
>>> Now that one after a year is doing it again. I rearranged the macros to
>>> different buttons of the two macros I mostly use, and it works flawlessly
>>> again for me. I doubt that Elecraft will keep sending me these things, but
>>> maybe I’m missing something. But all I can come up with is noisy switches,
>>> double triggering. No switch bounce protection?
>>> I notice now on the Elecraft site that there are PC boards available for
>>> about $120. Almost doable if the switches are not available separately, and
>>> less expensive than the $290 for a new unit.
>>> Has anyone come up with a part # for the original switches?
>>> Elecraft...?
>>> 
>>> Chuck Hawley
>>> c-haw...@illinois.edu
>>> 
>>> Amateur Radio, KE9UW
>>> aka Jack, BMW Motorcycles
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to k6um.el...@gmail.com
>>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to n...@cox.net
> 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K-POD Button Switches Intermittently triggering the wrong macro

[hawley, charles j jr]

I posted this on Elecraft .io but will try here as well...

I love this K-Pod, BUT I’ve sort of worn out 3 of them. The symptom is that the 
most used buttons get noisy and trigger another macro from another address. 
When I had the first one do that, I did extensive testing to eliminate rf 
noise, etc.
And a new unit however proved to work perfectly...for about 4 months. When it 
started doing the same thing Elecraft said it was highly unlikely and 
especially twice to the same guy, but they sent me another one anyway. Great 
company!
Now that one after a year is doing it again. I rearranged the macros to 
different buttons of the two macros I mostly use, and it works flawlessly again 
for me. I doubt that Elecraft will keep sending me these things, but maybe I’m 
missing something. But all I can come up with is noisy switches, double 
triggering. No switch bounce protection?
I notice now on the Elecraft site that there are PC boards available for about 
$120. Almost doable if the switches are not available separately, and less 
expensive than the $290 for a new unit.
Has anyone come up with a part # for the original switches?
Elecraft...?

Chuck Hawley
 c-haw...@illinois.edu

 Amateur Radio, KE9UW
 aka Jack, BMW Motorcycles
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com