[Flexradio] First iOS QSOs
This app is quite amazing and I thank all who were involved in creating it, making the 6000 series radios even better. I just worked 2 stations in Russia on cw from the comfort of my lounge chair in the living room! I'm getting some latency issues on SSB but that could be caused by my own network. I look forward to playing with this a great deal more in the future. KUDOS! Rick, W2JAZ -- Sent from Gmail Mobile ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Re: [Flexradio] Graphics Card Issues
I've had the same intermittent problems as have others I think. No solution found yet. I have one of Neal's computers and will see if there is a new driver available for my graphics card if I can still remember how to do this. Frankly, there have been way too many com port and SmartSDR CAT issues for my comfort zone and I've spent numerous hours this week with others helping to try and rectify them. I'm getting closer but added grey hair in the process! Rick, W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Re: [Flexradio] Transverter For for 6300
I've been reading this thread with interest as I'm trying to make up my mind between the DEMI and Elecraft. They both seem to have good specs and reports, but does the Elecraft supply power and sequencing for an external preamp? Rick, W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Re: [Flexradio] Log4OM issue
I solved the problem late last night. Turned out to be a virtual serial port conflict between Virtual Serial Port Manager. I had a pair set up for some unknown reason that conflicted with the port created by SmartCAT. As soon as I deleted that pair Log4OM worked perfectly. 73 Rick, W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
[Flexradio] SmartSDR Log4OM
I've reached the top of my pay grade with my new 6300, SMartSDR and Log4OM. I was unable to get SmartSDR to communicate with Log4OM so I upgraded Log4OM to the latest version. Things started to deteriorate as now not only does Log4OM not work I get the dreaded blue screen and the computer restarts every time I try to either omni OmniRig or Log4OM. I've tried uninstalling OmniRig and reinstalling it without success. I'm not quite at the panic point but close since all of my logs are in Log4OM. Any thoughts out there? Tnx 73 Rick, W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
[Flexradio] FOR SALE: Flex 1500
Excellent condition. Includes original packing, QuickStar Guide, power cord with power poles, USB cable and mic adapter with 1/8 jack and separate PTT switch jack. $475 shipped to continental US. PayPal accepted. Photo available on request. I just have one too many Flex radios after recently buying the 6300 and the QRP radio is excess to my needs. 73, Rick, W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
[Flexradio] Monitor Speakers
Just got a new 6300 and so far so good! I do need to buy a pair of computer monitor speakers. Any suggestions? I'm always concerned about RF getting into them and have not been all together happy with the WestMountain radio pair that I have. Rick, W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Re: [Flexradio] PowerSDR and Falling prices
For what it's worth, which I know isn't much, I too would gladly pay a reasonable,price for software upgrades. I do think this process could breath new life into the 3000 and 5000 which are great radios and far superior to much of what's out their from the pacific rim. As a satellite user I doubt I'll ever part with my 5000 with the v/u unit. It's an amazingly capable radio and very versatile compared to most on the market today including the new flex 6000 series radios, none of which have the capability of running vhf and uhf out of the box. Sellers of their Powersdr based radios should be patient and market to the right consumers. If you've got one like mine and want to sell it look for the VHF, UHF EME crowd. 73 Rick,W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
[Flexradio] 5000A Low Output
I've recently noticed that my output from Flex5000A seems low on some bands. For instance on CW 15 is down to about 60 watts out and 20 hovers around 75 or so. 40 meters seems to be about right at 100 watts. This does not seem normal nor does it seem to be where it once was. I had this radio serviced by Flex not long ago. I'm curious what other 5KA owners experience in terms of output. Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
[Flexradio] Granite Firewire Cable
I have a Granite cable I can't use anymore now that I've switched from a Mac to a Windows computer. Let me know if anyone is interested. Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] FOR SALE: Flex5000A
I have a 5000A for sale with ATU. I will ship with power cord, Kenwood hand mic, Firewire cable, disc with all manuals and software, and brand new Inland U-Connect 3-port PCI to IEE 1394 Firewire card for WIndows and Mac OS. I just bought a 5000 with ATU, 2nd RX and V/U module so I no longer have a use for this radio that has been used regularly until yesterday. If interested email me off list at rjlawn at gmail dot com. 73 Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] ATU and power meter problem
While I still have no response from the ATU Ihave learned from several who use the fully bundled flex5000a that the meter does not work when the flex5kA has been upgraded with the v/u module. Something I think due to the lack of a bridge pickup to grab the rf. Output is not affected. I did submit a ticket to FRS about the ATU unit not working as the seller insists that it was working fine. 73 Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] ATU RF Pwr Meter Problem
I just purchased a used bundled FLex 5000A to replace my Flex5000A with ATU which I'll probably soon post to sell. Here is what I'm finding with the new one: I see no RF Pwr in the meter though there is power output shown in the Palstar tuner meter. The ATU settings also reports Tune Failed: No RF Detected Any suggestions? Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] CW Key FlexControl Intermittent
I've encountered some issues with my CW key and FlexControl. Sometimes they work and other times they do not. I just rebooted the computer when the flexcontroller was not recognized. On reboot the controller was working just fine but my CW key is not working which has happened before. Any suggestions? Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] VSP Install Problem
I recently have attempted to install VSP Manager on an older Dell running XP Pro. Twice I've tried and twice I get the the following error message: The application failed to initialize properly (Oxc135) Click on OK to terminate the application. Any suggestions before I post on the Yahoo list? Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Power SDR on a Mac
I'm running Power SDR on an iMac i5 processor with only 4meg RAM. But I'm running WIn 7 under BootCamp. It works just fine and have been doing so for some time now. Just be care to make sure you update BootCamp when you update the main Mac OSX to a significant new OS like Lion to Mountain Lion, or whatever. I thought the BootCamp upgrade was automatic with the Mac system upgrade and learned that it is not and it can create some issues if you don't upgrade both. Good luck and I suspect the Mini will be fine but does it support FireWire? That's not an issue if you are using a Flex 1500 of course. 73 Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Windows 7 crashing since upgrade
I'm running windows 7 on an i5 iMac through boot camp. Installed the new version of Power SDR and noticed that windows has crashed multiple times lately. There is a blue text screen that describes the forced shut down and restart, but the screen disappears before I can copy the text. I'm now,trying to determine if this is related at all to the new version of Tobias' software I use with a Hercules DJ controller as an interface. I've posted a similar message on his yahoo group list. Anyone out there experience windows crashes with or without the controller software installed? Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Help with 5000A Problems
First lets start with the business end of things. I'm running the 5000A with an iMac under Boot Camp. I've not yet upgraded Power SDR from 2.3.5. Things have been running absolutely fine. This afternoon I powered everything up and there are all sorts of problems. 1) ATU not activating 2) PTT for SSB or CW key inactive 3) Other buttons responding slowly Any suggestions. I'm at a loss as I've changed nothing since last using the radio. Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Converter
Anyone out there ever tried a Hamtronics 2 meter receive converter on a flex radio? Rick W2jaz ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] v/u Satellites
I'd like to hear from users that have the V/U module installed that are using it in the satellites. Is it necessary to have the 2nd rcvr installed to operate full duplex? What tracking software are you using and have you found any glitches. I'm trying to decide on the upgrade and whether to fund it by selling my FT-847 or TS-2000. Thanks in advance for any advice. Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Problem with Hercules DJ Console
I took the advice of a number of Hercules users out there and purchased one to control my PowerSDR Flex5KA. Unfortunately I can't get it to run. I downloaded and installed the latest drivers, not trusting that what came shipped were the latest. I then installed the package, hooked the USB cable to my computer and then tried to open the softwareno gothne tried to start by running PowerSDR and then opening the Hercules app. Still no go and received the following error message: Unable to Load DLL ' pal.dll': the specific module could not be found. (and then it listed 3 items beginning with at Power SDR preceeded by the following statment: (exception from HRESULT: 0x8007007E) Any idea what I've missed or done wrong. I'll reboot and see if anything changes. By the way I'm running Win 7 under Boot Camp on an iMac. Happy New Year to everyone! Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Hercules DJ Console Problems
Ignore my last post as I figured out what I did wrong. I initially unzipped the software into the Flex Systems file found in the Roaming folder instead of the Program Files folder. Of course it didn't work! All is well and I'm now anxious to set up mapping from the Hercules controller. Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] flex on an imac
I too use an iMac running win 7 via boot camp and it works just great with my 5kA. I work all the modes too using various windows based software. Not too hard to set up and lots of help out there if necessary via this forum or on the flex wiki or web site. You'll love it! Happy holidays! Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Griffin USB Knob Questions
I just tried to get it to work today and no go. I'm using the most recent version of pwrsdr running under win 7. I suspect they never upgraded the software to support win 7. I'll just continue to learn the various keyboard commands built in to PWRSDR. thanks to everyone for eir comments. Rick W2JAZ On Saturday, December 10, 2011, Bob Logan bob.loga...@yahoo.com wrote: I thought I would need one of those when I first bought my 1500A. But after using a mouse and the various freq controls on the keyboard for going on three months now, I decided I didn't need it after all. It was merely my initial fear of 'what, no knobs at all? yikes! Bob, NZ5A Sent from my iPhone On Dec 10, 2011, at 2:42 PM, Burt k1...@yahoo.com wrote: I originally got one of those after market knobs, total pain in butt. My mouse does it all But others have a different view --- On Sat, 12/10/11, Richard Lawn rjl...@gmail.com wrote: From: Richard Lawn rjl...@gmail.com Subject: [Flexradio] Griffin USB Knob Questions To: flexradio@flex-radio.biz Date: Saturday, December 10, 2011, 3:14 PM I just turned up a Griffin USB knob which I assume can be used with my Flex5K. But is it worth it? Do I need a driver for it and I assume that the USB cable would plug into any available USB port? But again, is it worth it for Flex tuning control? RIck W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Griffin USB Knob Questions
I just turned up a Griffin USB knob which I assume can be used with my Flex5K. But is it worth it? Do I need a driver for it and I assume that the USB cable would plug into any available USB port? But again, is it worth it for Flex tuning control? RIck W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] PTT Delay in HRD/DM780
I've noticed I think since my recent upgrade to PWRSDR v2.2.3 that I sometimes see a delay in the PTT engaging while running PSK under DM780. Notice I said sometimes because other times I hit the send tab and transmit engages immediately, but most times there is quite a delay. Any thoughts? Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Easy pal
Tnx to all for advise on using easy pal with my flex. Looks pretty straight forward and I'll try and set it up this weekend while we sit around and get hammered by the hurricane. First an earth quake and now a hurricane! Rick W2JAZ On Thursday, August 25, 2011, flexradio-requ...@flex-radio.biz wrote: Send FlexRadio mailing list submissions to flexradio@flex-radio.biz To subscribe or unsubscribe via the World Wide Web, visit http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz or, via email, send a message with subject or body 'help' to flexradio-requ...@flex-radio.biz You can reach the person managing the list at flexradio-ow...@flex-radio.biz When replying, please edit your Subject line so it is more specific than Re: Contents of FlexRadio digest... Today's Topics: 1. Re: RX2 Protection during transmit (Tim Ellison, W4TME) 2. Re: RX2 Protection during transmit (n...@comcast.net) 3. USB External Keypad Dedicated to Flex VFO (W6SDM Steve) 4. FlexControl dead (Clyde Washburn) 5. EasyPal (Richard Lawn) 6. Re: EasyPal (Dave Beumer W?DHB) 7. Re: EasyPal (John Wagner) -- Message: 1 Date: Wed, 24 Aug 2011 14:33:41 -0400 From: Tim Ellison, W4TME t...@flex-radio.com To: flexradio@flex-radio.biz Subject: Re: [Flexradio] RX2 Protection during transmit Message-ID: 4e554405.4090...@flex-radio.com Content-Type: text/plain; charset=ISO-8859-1; format=flowed Jerry is correct on all points. The FLEX-5000 has a stout front end and it will take a signal in excess of 0 dBm to saturate the ADCs. You should be OK unless the RX antenna is in the near field of the transmitting antenna and you are running very high power. My antennas are in the near field of each other (5' separation) and I have no issues at 100 watts other than pegging the S meter on the RX2 :-) If you are worried about it, then there are some devices that will switch out the RX antenna when transmitting from companies like DX Engineering and Heros just to name two. -Tim -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http://www.flexradio.com logo /Tune In Excitement^(TM) PowerSDR^(TM) is a trademark of FlexRadio Systems/ On 8/24/2011 11:36 AM, Jerry Flanders wrote: This has been discussed before, and Gerald posted some actual RF levels that were known to be safe for the receiver front end. I would simply measure on all bands and verify that my setup was below these levels. Attenuate in some way if not. Search the archives for the earlier posts on this and Google flex gerald w4uk level and see my July 19, 2009 post for more. BTW, lack of muting is not an oversight. In fact, unmuted simultaneous receive is one of the features of the 5000 that Flex mentions on 5000 features page http://www.flex-radio.com/Products.aspx?topic=f5k_features : The FLEX-5000 was designed from the ground up to be a true full duplex radio that can transmit and receive simultaneously without the need for a second installed receiver. With this capability, the FLEX-5000 is positioned to be the ultimate CW rig ever made. For phone use, you will be able to monitor your actual audio that is being transmitted rather than using a monitor circuit in the audio chain. Jerry W4UK At 10:48 AM 8/24/2011, John Wagner wrote: All, As I understand this, when using RX2 with a receive-only antenna ( for example) and the RX2 input configured to RX2 IN, there is no protection for RX2 during transmit. The only time there is protections for RX2 occurs when the input is set to RX1 Tap. Makes using a separate antenna on RX2 a potentially harmful thing. I supposed you have to build/buy a external relay or some other scheme. Seems like a bit of an oversight. 73, John W8JJW ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ -- Message: 2 Date: Wed, 24 Aug 2011 19:17:17 + (UTC) From: n...@comcast.net To: t...@flexradio.com Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] RX2 Protection during transmit Message-ID: 170337245.703689.1314213437496.javamail.r...@sz0051a.westchester.pa.mail.comcast.net Content-Type: text/plain; charset=utf-8 Per the Flex specs on the 5000: Full duplex without the need for a second receiver installed for the ultamate CW rig How does one set up full duplex without the RX2? I assume separate antenna and then settings on the antenna routing options
[Flexradio] EasyPal
Heard some guys using digital SSTV on 20 meters and got curious since I had done some SSTV about 15 years ago. They suggested I give it a try. Anyone using EasyPal software with PwrSDR? Any suggestions on configuring the software. I have DDUtil installed, VAC. Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Using CW Skimmer
I just downloaded CW Skimmer to try. While I have it working with my PWR SDR Flex 5000A, the set up parameters that seem to work do not match what they recommend in the knowledge base: Under the Audio Tab setting the Knowledge Base says to select WDM and VAC 2 and 1. My system works only if I select MME. Can someone clarify this. TNX 73 Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Chatter at Power Down
Thanks to you all for setting my mind at ease. Rick W2JAZ On Monday, June 6, 2011, Laurie vk...@westnet.com.au wrote: Just checked it again. It sends signals whether the amp is on or off, I can see it in the key line LED every time I turn the Flex off. I don't remember this prior to V 2 and to be honest I had forgotten about it because I make sure the amp is always off prior to shutdown for this reason. Laurie -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Laurie Sent: Monday, 6 June 2011 2:15 PM To: 'Jerry Flanders'; 'Richard Lawn'; flexradio@flex-radio.biz Subject: Re: [Flexradio] Chatter at Power Down Same here with my old TL922 - first time I heard it I wondered what broke - just as well the tickers ok hi Laurie VK7ZE -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jerry Flanders Sent: Monday, 6 June 2011 1:56 PM To: Richard Lawn; flexradio@flex-radio.biz Subject: Re: [Flexradio] Chatter at Power Down I get chatter from my Quadra (controlled by DDutil) if it is still on when I cut the 13V to the Flex 5000a. Jerry W4UK At 06:31 PM 6/5/2011, Richard Lawn wrote: I didn't notice this until recently though maybe my Flex 5KA has been doing this for a while. Recently I hear what sounds like relays chattering when I power the rig down. It happens just briefly but happens every time. Anyone else have this issue or is there something here I should keep my eye on? Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Chatter at Power Down
I didn't notice this until recently though maybe my Flex 5KA has been doing this for a while. Recently I hear what sounds like relays chattering when I power the rig down. It happens just briefly but happens every time. Anyone else have this issue or is there something here I should keep my eye on? Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] RF in Audio with Amp
It seems that I'm getting some RF in my audio when using my AL811H with 5000A. I'm keying am through a little AmpKeyer device. Any suggestions on where to put ferrites? I've used a few already bu no luck so far. I've experienced some audio distortion in the past but that seem to be due to over driving with mic gain to high. Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Audio Distortion
I've not posted in a while since I've had no recent problems since the upgrade to v. 2.0.19, but I've just suddenly discovered terribly distorted audio with an echo as well back in SSB mode. I had this problem months ago with an earlier version and got help solving it. I checked levels and only running about 15 on mic gain and DX is set to about 4. Main Transmit meter mic setting shows levels running about 0db on peaks and averaging less overall. In the Settings DSP - AGC/ALC panel I do not have Enabler selected but have also tried it selected with no improved result. Should I just make the upgrade to the latest version? If I do will I suffer any CW issues as I'm one of those old guys who stills enjoys that mode hi hi. Rick W2JAZ PS Running an iMac using Win 7 via Boot Camp ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] WSPR
Anyone out there using WSPR with their 5K? Any suggestions on setup or is it obvious, although nothing is obvious on a Windows PC to the long-time Mac user :)? I noticed that in the list of radios supported by WSPR only includes the Flex 1K. Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Satellite software for flex
Just curious if any who have upgraded their flex 5k with the v/u modules are using their radios to work the birds? If so have any of the software developers added the flex to their list of supported radios? I suspect not yet but please let me know if you know otherwise. Happy new year! Rick W2jaz ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Satellite software for flex
For the record I've not yet added the v/u module which is exactly why I posed the question. Can I move my 847 to my summer cottage or should I not risk that and purchase a ts2000 while the prices are good. I suspect that it may be a while before the software developers will support flex radios. I hope I'm wrong. Maybe that will happen when the Mac os is developed for flex. Cheers Rick W2jaz On Tuesday, December 28, 2010, Tim Ellison telli...@itsco.com wrote: The FLEX-5000 is always in full duplex mode. You can't (easily) change it to half duplex. Just use the radio like you would in SPLIT mode with HF with VFO-B being the downlink. I am not sure about using VSP manager as CAT middleware as it will depend a lot on the rate of polling and frequency changes the Doppler controlling program will be executing. -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Mike Young Sent: Tuesday, December 28, 2010 10:04 AM To: Richard Lawn; FlexRadio@flex-radio.biz Subject: Re: [Flexradio] Satellite software for flex Rick, Have you used your 5k v/u on the satellites yet? If so, how did u get it into duplex? I crashed PowerSDR so bad last nite trying it now won't complete its startup. I did have success getting MacDoppler to control PowerSDR via VSPManager. Will eventually try SatPC32 but I find that program just too difficult to learn. 73's Mike, WB8CXO On 12/28/2010 9:51 AM, Richard Lawn wrote: Just curious if any who have upgraded their flex 5k with the v/u modules are using their radios to work the birds? If so have any of the software developers added the flex to their list of supported radios? I suspect not yet but please let me know if you know otherwise. Happy new year! Rick W2jaz ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] SSB Audio Issues
I've not been happy with the audio since acquiring my Flex 5K. I've had reports of distortion, noise and serious echo. I'm using Yaesu's MD-1 mic. I've played with the settings and spoken to another user trying to model his settings in the audio section. I'm fiarly convinced I'm doing something wrong. By the way PSK and CW work just fine. Any suggestions of what might be set up wrongI've hardly made any SSB contacts since first setting the radio up months ago. Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Automatic Tune
For the record I have also experienced some erratic tuning and for what seems to be no apparent reason. Sometimes the antennas will tune instantly and sometimes not at all. Weather has not been the issue here either. Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] External Amp w/5000A
I have a AL811H amplifier and AmpKeyer interface that I've used with my FT-847. I'd like to try it with my 5000A. Is there anything in particular I should watch out for or do I just lash the Flex to the AmpKeyer using the appropriate RCA jacks? Any advice would be appreciated. Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] External Amp w/5000A
TNX everyone! Always good to play it safe but it seems what I have is more than compatible with the 5K. Probably will give it a try in the next day or so. Happy holidays! RIck On Sat, Dec 18, 2010 at 3:48 PM, Dan Garrett garrett.d...@gmail.com wrote: Rick - FWIW, I use the ARB-704 (Ameritron) as the interface for my f3k to the AL-811H. I have done so without issue for some time now... _dan, wy0o *** On Sat, Dec 18, 2010 at 2:41 PM, Ray - K9DUR k9...@rnacs.com wrote: Rick, Just lash it to the RCA jack of choice! 73, Ray, K9DUR http://k9dur.info -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Richard Lawn Sent: Saturday, December 18, 2010 1:47 PM To: flexradio@flex-radio.biz Subject: [Flexradio] External Amp w/5000A I have a AL811H amplifier and AmpKeyer interface that I've used with my FT-847. I'd like to try it with my 5000A. Is there anything in particular I should watch out for or do I just lash the Flex to the AmpKeyer using the appropriate RCA jacks? Any advice would be appreciated. Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Flex5K Power loss
My stupid mistake which I already owner up to with Neil. Somehow the mouse magically had changed the meter to the reflected power setting! I felt like an idiot! Still getting used to no knobs and switches I guess :) Rick W2jaz On Sunday, December 5, 2010, FlexRadio Support, Dudley Hurry supp...@flex-radio.com wrote: Richard, Besides the info that Neal requested, be sure to check you power Supply connections and the power supply itself.. Last week several reported power supply failures. 73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: dud...@flexradio.com dud...@flex-radio.com Web: www.flexradio.com http://www.flex-radio.com Tune in excitement! ™ On Sat, Dec 4, 2010 at 6:30 PM, Richard Lawn rjl...@gmail.com wrote: Anyone ever experience a sudden power loss, dropping to about 10 Watts. This has happened twice and the first time I just rebooted and all was fine. I'm waiting to do the same this time and crossing my fingers. Anyone else experience this? Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Flex5K Power loss
Anyone ever experience a sudden power loss, dropping to about 10 Watts. This has happened twice and the first time I just rebooted and all was fine. I'm waiting to do the same this time and crossing my fingers. Anyone else experience this? Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] PTT hang with HRD 2.0.16 version
Has anyone tried to use HRD/DM780 with the newest 2.0.16 version? It now works for me with this new version of PwrSDR but there is a hang, a bit of a delay in PTT activation and release back to receive. Any suggestions or similar experiences? I'm activating PTT via HRD not serial. I may just go back to using mini-deluxe. By the way, I find cw mode much better with my Bencher key in 2.0.16 version as compared to earlier versions. Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Fldigi and Flex Bug
I'm now using Flgidi on my Flex 5K and it works great with one hitch. After using if for a bit the text labeling all the macro button taps disappears. Anyone else experience this bug? Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] (no subject)
Now that I've conquered psk using mini-deluxe I've been attempting to get Fldigi to run at the suggestion of several on the list. I get receive to work fine but not xmit and it isn't registering the powersdr. I can't seem to find the PowerSDR.XML file that they tell you to put in the radio folder, which I can find inside Fldigi and it is empty. What am I missing or doing wrong? I'm away until tomorrow afternoon when I'm hoping to solve this. Tnx Rick W2jaz ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Still Frustrated
Thanks to all who responded with life lines. I got back to it this morning. Checked all settings in PWRSDR setup and went back and setup mini-Deluxe, DM780 and Logbook. All working nowgo figure? I do have one further question. In PSK31 xmit mode I seem to be getting a little burp about every 4 seconds. That's the best way I can describe it. Any thoughts. I'm using PWRSDR 2.0.13 at the moment. Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Still Frustrated
I'm feeling old and frustrated! I love the new Flex 5000A receiver but am having very little luck with digital modes and CW. It's been recommended that I not use HRD but switch to mini-deluxe which I did. DM780 receives fine but won't activate PTT. Then I tried Fldigi and found that it had a very limited number of com port choices which don't match my options. PWRSDR is set to com 9 here and I do not have PTT enabled. Should I? If so which com port should it be set to? I've had quite a time getting this set up for digital modes and CW, which still isn't working well. I have to say that I've never had so little on air time with a new radio. I seem to be spending all my available time trying to figure out how things work. Sorry to complain but I find it frustrating. Is there some tutorial somewhere that provides an easy way to set the radio up for each mode - proper levels, recommended digi mode software etc? Maybe there is and I just haven't had time to find it. Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] HRD Question
I'm a new Flex 5000A user and have found that there is a significant delay in HRD keying the Flex so about a short line of text is sent before the PTT actually engages transmitter. Suggestions? Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Daisy Chaining Drives
I'm a new Flex 5000A owner. I recently purchased one about a year old and am getting around to hooking it up with my iMac running Win 7 and Boot Camp. Because of my station layout I need to route the firewire cable from the Flex through my external backup drive and then to the computer. Does anyone see any problems in daisy chaining drives between Flex and computer? Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Satellite Users
You're right and makes sense to me. The fewer moving parts the better I always say. Rick W2JAZ On Tue, Aug 3, 2010 at 4:41 PM, Tim Ellison telli...@itsco.com wrote: And it does a good job of it too. I don’t think W6IHG is improving it anymore, but it really works well on my 910H, which I plan to retire after I get the V/U in service. -Tim *From:* kq...@verizon.net [mailto:kq...@verizon.net] *Sent:* Tuesday, August 03, 2010 4:34 PM *To:* Tim Ellison *Cc:* rjl...@gmail.com; flexradio@flex-radio.biz *Subject:* Re: RE: Re: [Flexradio] Satellite Users OK, so the Radio Tuner program completes what Nova was always lacking. Thanks for the clarification. Jim Aug 3, 2010 01:31:15 PM, telli...@itsco.com wrote: xmlns:w=urn:schemas-microsoft-com:office:word xmlns:m= http://schemas.microsoft.com/office/2004/12/omml; xmlns=http://www.w3.org/TR/REC-html40; They are two separate programs that accomplish the same thing. Except RadioTuner uses Nova for Doppler control. -Tim *From:* kq...@verizon.net [mailto:kq...@verizon.net kq...@verizon.net] *Sent:* Tuesday, August 03, 2010 4:09 PM *To:* Tim Ellison *Cc:* rjl...@gmail.com; flexradio@flex-radio.biz *Subject:* Re: Re: [Flexradio] Satellite Users Tim, do you mean SatPC32 AND/OR Radio Tuner? Since SatPC32 does Doppler correction and rotor pointing, I'd rather just use it than have another application to worry about. 73, Jim KQ6EA Aug 3, 2010 11:28:51 AM, telli...@itsco.com wrote: There has been some testing with SatPC32 and RadioTuner by W6IHG with the V/U module. Both look like they will work fine. -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [ mailto:flexradio-boun...@flex-radio.biz flexradio-boun...@flex-radio.biz] On Behalf Of Richard Lawn Sent: Tuesday, August 03, 2010 2:12 PM To: flexradio@flex-radio.biz Subject: [Flexradio] Satellite Users I'd like to hear from anyone using the 5000A on the satellites. I'm interested in the software you are using, rotor control, and of course any quirks or issues you've encountered. I'm thinking of clearing out my shack including the FT-847 and trying the 5000A with VHF/UHF module. TNX Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz target=_blankhttp://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: target=_blankhttp://www.mail-archive.com/flexradio%40flex-radio.biz/ http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz target=_blankhttp://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: target=_blankhttp://www.mail-archive.com/flexradio%40flex-radio.biz/ http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Satellite Users
I'd like to hear from anyone using the 5000A on the satellites. I'm interested in the software you are using, rotor control, and of course any quirks or issues you've encountered. I'm thinking of clearing out my shack including the FT-847 and trying the 5000A with VHF/UHF module. TNX Rick W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Flex Users on Macs
I'd like to hear from a few users who are using their Flex Radios with Macs running under Windows. Which bridge software are you using - Boot Camp, Parallels, etc.? Have you encountered any difficult problems to solve along the way. I'm considering the 5000A down the road. TNX Rick W2JAZ rjl...@gmail.com ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/