Re: Prism GT Chipset, hostap?
Hello For Prism2.5 based cards you can use native wi driver, hostap works well, except bug in tx rate detection - it's fixed to 2Mbit/s more info there http://lists.freebsd.org/pipermail/freebsd-current/2004-May/027476.html For PrismGT there is non-oficial driver from Green http://green.homeunix.org/~green/prism54-driver/pff/ just compile it, it creates if_pff.ko module, then load it I found the problem, that if I load module in already running system, it works well, but if I load it at the boot (if_pff_load="YES" in /boot/loader.conf), I got panic (something with locking, i'll give some info to green after debugging) however hostap works well I have already compiled version on FreeBSD 5.3-STABLE #0: Tue Nov 16 09:56:37 CET 2004 you can get it on (also with firmware - see Makefile) in one tgz http://bsd.mikulas.com/wifi/pff-all.tgz Jiri Nikolas Britton wrote: Do the Prism GT chipsets support hostap mode in freebsd (does freebsd even support this chipset?)? and are there any other chipsets besides Prism 2/2.5/3? that work in hostap mode? Thank you, Nikolas ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: News from several NNTP Servers
On Fri, Dec 31, 2004 at 10:20:38PM -0800, Sergei Gnezdov wrote: > NNTP clients I like (Emacs) work with one NNTP server at a time. > > I use some free NNTP server, but its reliability is not the best. > > So, I am thinking of collecting news from free servers, which specialize > on certain newsgroups. I don't know how to do that or what to use. > > I also would like to collect/cache newsgroup messages on my machine, so > I can decide expiration rules. As you seem to already have figured out, the solution is to run a local newsserver which gathers messages from several servers and caches them. > > I think I could use INN server, but I have no idea how upstream servers > are different from NNTP client connections. There are two different ways of getting news from upstream. The first is to have them send everything to you. This requires some kind of agreement with the upstream-server. The other is to pull articles one by one from the upstream just like a normal nntp-client. Most nntp-servers can be configured to pull data from upstream just as if it was a client which means that you do not need any sort of special agreement with upstream. I am not familiar with INN, but I feel fairly certain that it can be configured to pull articles from upstream. You might also wish to take a look at the leafnode or nntpcache ports, both of which seem to have been designed exactly to do what you need. Dnews can also be configured to do what you want, but since that is a commercial program (with a free download and a free trial period) you might not want it. -- Erik Trulsson [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: BTX halted
The first advice I would give is, go and trying flashing your BIOS with an updated version. Regards S. Indian Institute of Information Technology Subhro Sankha Kar Block AQ-13/1, Sector V Salt Lake City PIN 700091 India > -Original Message- > From: [EMAIL PROTECTED] [mailto:owner-freebsd- > [EMAIL PROTECTED] On Behalf Of kalin mintchev > Sent: Saturday, January 01, 2005 10:04 > To: freebsd-stable@freebsd.org > Cc: freebsd-questions@freebsd.org > Subject: BTX halted > > hi all... > > i'm trying to install 5.3 on an amd machine... > i got the discs and they are ok but when i start the off the disk the boot > stops with BTX halted no matter which boot mode i chose. > i looked on google and i found a few posts about bios issues but non of > that helped - i couldn't find how to disable DMA. the only location i saw > the DMA mentioned was under PnP/PCI configurations => Resources Controlled > by in the bios but there the setting is Auto(ESCD). i tried al the options > there and it still stops at the same place... > > anybody can help?! > > thanks > > > -- > > > > > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions- > [EMAIL PROTECTED]" smime.p7s Description: S/MIME cryptographic signature
Re: iTunes server setup not going well
On Saturday 01 January 2005 01:05 am, Timothy Luoma wrote:
> On Dec 31, 2004, at 9:41 PM, jason henson wrote:
> >> [did that... I have downloaded Rendezvous.tar.gz and
> >> mDNSResponder-58.8.tar.gz to /usr/ports/distfiles/]
> >>"After doing this, go back to /usr/ports/net/rendezvous (if
> >> needed) and type: make install clean"
> >> BUT... but... there is no /usr/ports/net/rendezvous !
> >
> > ports/net/p5-Net-Rendezvous
>
> They're the same? I had seen that one but didn't realize it was the
> same.
>
> >> I thought maybe that I had to build mDNSResponder first, so I
> >> tried that:
> >> freebsd# cd /usr/ports/net/mDNSResponder/
> >> freebsd# make install clean
> >> ===> Vulnerability check disabled, database not found
> >> ===> Extracting for mDNSResponder-58.8
> >> => Checksum OK for mDNSResponder-58.8.tar.gz.
> >> => Checksum OK for mDNSdocs-1.0.tar.gz.
> >> ===> Patching for mDNSResponder-58.8
> >> ===> Applying FreeBSD patches for mDNSResponder-58.8
> >> 4 out of 5 hunks failed--saving rejects to mDNSPosix/Makefile.rej
> >> => Patch patch-mDNSPosix::Makefile failed to apply cleanly.
> >> => Patch(es) patch-NetMonitor.c patch-Responder.c
> >> patch-mDNSCore::mDNSClientAPI.h applied cleanly.
> >> *** Error code 1
> >
> > Don't download it yourself, do make fetch, or just make install.
> > Looks like you are downloading a different version than has been
> > ported. If you want the port updated contact the maintainer.
>
> OK, I think I've got it working now.
>
> Except that /usr/local/etc/rc.d/mDNSResponder.sh didn't exist
>
> I copied /usr/ports/net/mDNSResponder/files/mDNSResponder.sh there,
> but it clearly expects to be automatically configured by the
> installation program.
>
> #!/bin/sh
>
> # PROVIDE: mDNSResponder
> # REQUIRE: NETWORKING
> # KEYWORD: FreeBSD
>
> . %%RC_SUBR%%
>
> name=mDNSResponder
> rcvar=`set_rcvar`
>
> command=%%PREFIX%%/sbin/mDNSResponder
>
> mDNSResponder_enable=${mDNSResponder_enable:-"NO"}
> mDNSResponder_flags=${mDNSResponder_flags:-"-b -n `/bin/hostname
> -s`"}
>
> pidfile="/var/run/mDNSResponder.pid"
>
> load_rc_config $name
> run_rc_command "$1"
>
> # end
>
> There's no 'mDNSResponder' in any sbin folder, there is one in
> /usr/local/bin/mDNSResponder, so I tried changing that line to
>
> command=/usr/local/bin/mDNSResponder
>
> but then I get
>
> set_rcvar: not found
> load_rc_config: not found
> run_rc_command: not found
>
> I suspect that may have something to do with this line:
>
> . %%RC_SUBR%%
>
> and I have no idea what that should be.
>
> So I Googled "RC_SUBR mDNSResponder" and came across
> http://lists.freebsd.org/pipermail/freebsd-ports/2004-September/
> 015760.html which suggested I use ". /usr/local/etc/rc.subr" which
> doesn't exist (maybe that's where it was for 4.x?) it is now at
> /etc/rc.subr so I used this:
>
> . /etc/rc.subr
/usr/ports/sysutils/rc_subr
A good explanation: http://www.freshports.org/sysutils/rc_subr/
>
> so now I can run
>
> /usr/local/etc/rc.d/mDNSResponder.sh start
>
> without error
>
> Does it work?
>
> Well, we'll have to wait until I get to the office and check.
>
> TjL
>
> ___
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "[EMAIL PROTECTED]"
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD PNP OS = NO in system bios configuration?
On Fri, Dec 31, 2004 at 10:17:04PM -, John Conover wrote: > Should PNP OS = NO in the PC system bios configuration be used for > freeBSD? Yes, it should be set to "NO" for any operating system. The only exception is Windows 95/98. > How about assigning IRQs of the PCI devices in system bios? This should not be necessary. You could try to load "setup defaults" in your BIOS and use FreeBSD 5.3 instead of 5.2.1. Uwe ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Passing options to a 'make install clean'
On Fri, Dec 31, 2004 at 06:51:49PM -0500, Sean wrote: > Well that is a real problem!! > Recommend any alternative office packages? The Gnome-Stuff: Abiword, Gnumeric... Uwe ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
FreeBSD Conference at Turkey Videos
Hi, Last week I have sent the link of pictures of conference that was held in Middle East Technical University. (http://www.enderunix.org/events/metu2004/pictures) We have finished to make XVIDs of the conference and uploaded them to ftp://ftp.enderunix.org/pub/events/metu2004 Anyone want to watch can download them. By the way conference was done in Turkish language. Best REGARDS. --- Omer Faruk Sen http://www.EnderUNIX.ORG Software Development Team @ Turkey http://www.Faruk.NET For Public key: http://www.enderunix.org/ofsen/ofsen.asc First Turkish FreeBSD book is out! Go check it. Duydunuz mu! Turkiye'nin ilk FreeBSD kitabi cikti. http://www.acikkod.com/freebsd.php ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Compiling FreeBSD 4.10 kernel with gcc native and gcc-3.4.3
Dear FreeBSD people, I had problems in my ATHLON-XP with 5.3 Release. While compiling the kernel to use NVIDIA drivers I opened emacs and everything freezed 2 times! The third time I didn't touch emacs so the kernel compilation finished without everything to freeze! Thus I decided to install FreeBSD 4.10! Everything was working fine! I then recompiled the kernel such that I can use the nvidia drivers. Here is my config - # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.59 2004/04/07 20:29:01 vkashyap Exp $ machine i386 #cpuI386_CPU #cpuI486_CPU #cpuI586_CPU cpu I686_CPU ident MYKERNEL maxusers0 makeoptions CONF_CFLAGS=-fno-builtin #makeoptionsDEBUG=-g#Build kernel with gdb(1) debug symbols #optionsMATH_EMULATE#Support for x87 emulation options INET#InterNETworking #optionsINET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT#FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options UFS_DIRHASH #Improve performance on big directories options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT#NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000#Delay (in ms) before probing SCSI options UCONSOLE#Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B#Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM#Rate limit bad replies options KBD_INSTALL_CDEV# install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT# Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT# Print register bitfields in debug # output. Adds ~215k to driver. # To make an SMP kernel, the next two are needed #optionsSMP # Symmetric MultiProcessor Kernel #optionsAPIC_IO # Symmetric (APIC) I/O device isa device eisa device pci # Floppy drives device fdc0at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy, # don't use the above line for fdc0 but the following one: #device fdc0 device atapicam # ATA and ATAPI devices device ata0at isa? port IO_WD1 irq 14 device ata1at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device ahd # AHA39320/29320 and onboard AIC79xx devices #device
Re: Compiling FreeBSD 4.10 kernel with gcc native and gcc-3.4.3
> Date: Sat, 1 Jan 2005 13:22:03 +0200 > From: [EMAIL PROTECTED] > To: [EMAIL PROTECTED], [EMAIL PROTECTED], > freebsd-questions@freebsd.org [ removed -performance from CC list ] > linking kernel > ncr53c500.o: In function `ncv_world_start': > ncr53c500.o(.text+0x415): undefined reference to `softintr' > nsp.o: In function `nsp_world_start': > nsp.o(.text+0xbab): undefined reference to `softintr' > tmc18c30.o: In function `stg_world_start': > tmc18c30.o(.text+0x2fc): undefined reference to `softintr' > *** Error code 1 > > So I cannot link! > > Any suggestions? http://lists.freebsd.org/pipermail/freebsd-hackers/2004-December/009422.html http://lists.freebsd.org/pipermail/freebsd-hackers/2004-December/009424.html > 1:) How can I fix this? Whack-a-mole until you're confident everything works correctly. It's a matter of trial and error. > 2:) Why FreBSD 4.10 is using such an old compiler? Nobody has upgraded it. What's there is stable and works; nobody has volunteered to replace it, test, and assure that all is correct. Efforts are going toward RELENG_5 and CURRENT. ]Note that I do not speak in any official capacity, and am open to corrections, but would be surprised if anyone disagreed. > 3:) Has anybody tested FreeBSD 4.10 with gcc-3.4.X? No. See above URLs; gcc 3.4 scared me, so I backed off to 3.3. Eddy -- Everquick Internet - http://www.everquick.net/ A division of Brotsman & Dreger, Inc. - http://www.brotsman.com/ Bandwidth, consulting, e-commerce, hosting, and network building Phone: +1 785 865 5885 Lawrence and [inter]national Phone: +1 316 794 8922 Wichita DO NOT send mail to the following addresses: [EMAIL PROTECTED] -*- [EMAIL PROTECTED] -*- [EMAIL PROTECTED] Sending mail to spambait addresses is a great way to get blocked. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
HP psc2105 "all in one" printer under 5.3?
Has anyone sucessfully gotten an HP psc2105 printer to work on 5.3-RELEASE? I have a box that I'd like to put to use as (in addition to his other tasks) a workgroup print server for a herd of XP/2000 PC's. I don't see *any* *nix drivers for this device on the HP site, and buying another printer just isn't a viable option at this moment. (Madly reading the Printing section of the Handbook and hoping for some inspiration therein) Regards & TIA -Colin ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: portupgrade vs. portmanager
On 28 Dec Michael C. Shultz wrote: > Portmanager only addresses that one issue and for the forseeable > future that is where all the focus will be, only on correctly updating > ports. Am I to understand correctly that portmanager _always_ updates ALL the old ports? A 'pormanager -u sylpheed' is not possible then? -- dick -- http://www.nagual.st/ -- PGP/GnuPG key: F86289CE ++ Running FreeBSD 4.10 ++ Debian GNU/Linux (Woody) + Nai tiruvantel ar vayuvantel i Valar tielyanna nu vilja ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Something wrong in stable 5.3?
On Fri, Dec 31, 2004 at 05:44:51AM -0600, Nikolas Britton wrote: " Peter Ulrich Kruppa wrote: " " >On Thu, 30 Dec 2004, Tom Connolly wrote: " > " >>Eugene M. Minkovskii wrote: " >> " >>>Hi! " >>> " >>>I'm confusing now: about a month ago I have upgrated from FreeBSD " >>>5.2.1 to stable 5.3. Since this moment strange things have been " >>>happens on my PC. Usually system works Ok, and can be run as long as " >>>I need without errors. But sometime, (after a little time after the " >>>boot) all begin crashed (core dump --- signal 11). Crashed base " >>>utility, like `cat', `sh' etc. " >>> " >>>Today I have cvsup'ed to stable 5.3 again, and build world again, but " >>>problem don't go away. " >>> " >>>I don't understand what I should do to detect source of problem... " >>> " >>>Have you any idea? " >> " >> " >>Check the power supply. " > " >... and your hard disk. You have some kind of hardware problem. " > " >Regards, " > " >Uli. " > " What do you mean by "stable 5.3" if you are tracking 5-STABLE (RELENG_5) " then this could be the problem. If you are change cvsup to RELENG_5_3 " and try again, if you are tracking RELENG_5_3 then yes I'd say it was a " hardware problem too. Power supply, Ram, or something overheating are " likely suspects for "random" problems. Thanks, may problem not in hard or fan. Because 5.2.1 I using whell. About stable 5.3 I mean tag=RELENG_5 So do you mean RELENG_5 and RELENG_5_3are different branches? -- Sensory yours, Eugene Minkovskii Сенсорно ваш, Евгений Миньковский ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re[2]: Something wrong in stable 5.3?
Hi Eugene, Saturday, January 1, 2005, 2:21:18 PM, you made these points: > On Fri, Dec 31, 2004 at 05:44:51AM -0600, Nikolas Britton wrote: > " Peter Ulrich Kruppa wrote: > " " >>On Thu, 30 Dec 2004, Tom Connolly wrote: " >> " >>>Eugene M. Minkovskii wrote: " >>> " Hi! " " I'm confusing now: about a month ago I have upgrated from FreeBSD " 5.2.1 to stable 5.3. Since this moment strange things have been " happens on my PC. Usually system works Ok, and can be run as long as " I need without errors. But sometime, (after a little time after the " boot) all begin crashed (core dump --- signal 11). Crashed base " utility, like `cat', `sh' etc. " " Today I have cvsup'ed to stable 5.3 again, and build world again, but " problem don't go away. " " I don't understand what I should do to detect source of problem... " " Have you any idea? " >>> " >>> " >>>Check the power supply. " >> " >>... and your hard disk. You have some kind of hardware problem. " >> " >>Regards, " >> " >>Uli. " >> > " What do you mean by "stable 5.3" if you are tracking 5-STABLE (RELENG_5) > " then this could be the problem. If you are change cvsup to RELENG_5_3 > " and try again, if you are tracking RELENG_5_3 then yes I'd say it was a > " hardware problem too. Power supply, Ram, or something overheating are > " likely suspects for "random" problems. > Thanks, may problem not in hard or fan. Because 5.2.1 I using > whell. About stable 5.3 I mean tag=RELENG_5 So do you mean > RELENG_5 and RELENG_5_3are different branches? for sure. releng_5 is a branch in development -- Best Regards, +--==/\/\==--+ (__) FreeBSD | DanGer <[EMAIL PROTECTED]> |\\\'',) The | [EMAIL PROTECTED] ICQ261701668 | \/ \ ^Power | http://danger.homeunix.org | .\._/_)To +--==\/\/==--+ Serve [ Some words to know from the Ozarks: Dafeeda Road = a freeway onramp! ] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Good General Purpose Text Markup Language
I'm looking for a good way to be able to markup text strings stored in a database for displaying text in bold or other highlights and links to other docs. I'm thinking some kind of sgml or xml markup language would be best. I want a generic way to add it so it can be converted to many other forms besides html. I'll need paragraphs, bold, italics, superscripts for TM, and hyperlinks, but probably not much more. I've thought about using a minimal subset of xhtml so it can easily be converted to other forms, but I've heard of linuxdoc and whatever freebsd uses might be better. Any recommendations? -- I sense much NT in you. NT leads to Bluescreen. Bluescreen leads to downtime. Downtime leads to suffering. NT is the path to the darkside. Powerful Unix is. Public Key: ftp://ftp.tallye.com/pub/lorenl_pubkey.asc Fingerprint: B3B9 D669 69C9 09EC 1BCD 835A FAF3 7A46 E4A3 280C ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Devfs question
Hi, Well i use freebsd for sometime and i know many things in here but anyway i do NOT consider my self advanced user... So i am sorry if i cannot explain my problem properly. First of all i am running at the moment FreeBSD 5.2.1-RC2 on a DELL Latitude C810 Laptop. I have a problem with my sound card it is an ESS Technology Maestro3 pci card as FreeBSD recogizes also. The thing that makes me worry here is that when in X-windows i open the Info Center and press on "storage devices" section it gives me this screen with the storage devices which actually are my partitions or cdroms. (Sorry i am no sending a screenshot) so there is the root " / " paritions among with "/var", "/tmp", "/usr" and "/dev". Now all of them shows a normal output for "usage" and "Full%" and for "size" but "/dev" has the following attributes: device: "devfs" (where others: "/dev/..." are having the path) - Type: " ? " (where others "ufs" or "cd9660") - Size: "1024B" (where others "..MB" or "...GB" - Free: "0B" - Full: "100.0%" and finaly the "Usage" bar is red and full! Is this normal? (If you have problems understanding what i am describing in this e-mail please let me know and i am terribly sorry) Please advice Thank you in advance g that makes me worry here is that when in X-windows i open the Info Center and press on "storage devices" section it gives me this screen with the storage devices which actually are my partitions or cdroms. (Sorry i am no sending a screenshot) so there is the root " / " paritions among with "/var", "/tmp", "/usr" and "/dev". Now all of them shows a normal output for "usage" and "Full%" and for "size" but "/dev" has the following attributes: device: "devfs" (where others: "/dev/..." are having the path) - Type: " ? " (w Spiros P. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Devfs question
SPYRIDON PAPADOPOULOS wrote: Hi, Well i use freebsd for sometime and i know many things in here but > anyway i do NOT consider my self advanced user... So i am sorry if > i cannot explain my problem properly. First of all i am running at the moment FreeBSD 5.2.1-RC2 on a DELL > Latitude C810 Laptop. I have a problem with my sound card it is an ESS > Technology Maestro3 pci card as FreeBSD recogizes also. The thing that > makes me worry here is that when in X-windows i open the Info Center > and press on "storage devices" section it gives me this screen with > the storage devices which actually are my partitions or cdroms. (Sorry > i am no sending a screenshot) so there is the root " / " paritions > among with "/var", "/tmp", "/usr" and "/dev". Now all of > them shows a normal output for "usage" and "Full%" and for "size" > but "/dev" has the following attributes: device: "devfs" (where others: > "/dev/..." are having the path) - Type: " ? " (where > others "ufs" or "cd9660") - Size: "1024B" (where others "..MB" > or "...GB" - Free: "0B" - Full:"100.0%" and finaly the "Usage" bar > is red and full! Is this normal? Yes. Devfs is not a file system that exists on a disk, it is a device listing that is organized into a file system hierarchy. It (and procfs) are always full. -- Jeremy Faulkner <[EMAIL PROTECTED]> Resume: http://www.gldis.ca/gldisater/resume.html ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Devfs question
On Sat, Jan 01, 2005 at 01:59:10PM +, SPYRIDON PAPADOPOULOS wrote: > Hi, > > Well i use freebsd for sometime and i know many things in here but anyway i > do NOT consider my self advanced user... So i am sorry if i cannot explain my > problem properly. > First of all i am running at the moment FreeBSD 5.2.1-RC2 on a DELL Latitude > C810 Laptop. > I have a problem with my sound card it is an ESS Technology Maestro3 pci card > as FreeBSD recogizes also. The thing that makes me worry here is that when in > X-windows i open the Info Center and press on "storage devices" section it > gives me this screen with the storage devices which actually are my > partitions or cdroms. (Sorry i am no sending a screenshot) so there is the > root " / " paritions among with "/var", "/tmp", "/usr" and "/dev". Now all of > them shows a normal output for "usage" and "Full%" and for "size" but "/dev" > has the following attributes: device: "devfs" (where others: "/dev/..." are > having the path) - Type: " ? " (where others "ufs" or "cd9660") - Size: > "1024B" (where others "..MB" or "...GB" - Free: "0B" - Full: "100.0%" and > finaly the "Usage" bar is red and full! > Is this normal? Yes, devfs is a virtual filesystem, it takes no space on any real device like a hard disk. All files under /dev are a special type of file called character or block device files and have no data in themselves, but are basically symbolic names for various devices in your system. Also, as devfs is maintained in memory and all files are created automatically as hardware appears and disappears, like usb devices, it only uses as much memory as needed and, therfore, will allways show up as 100% full. > (If you have problems understanding what i am describing in this e-mail > please let me know and i am terribly sorry) Wrapping lines ar 72 characters will help make the email more readable in the future. > > Please advice > Thank you in advance > g that makes me worry here is that when in X-windows i open the Info Center > and press on "storage devices" section it gives me this screen with the > storage devices which actually are my partitions or cdroms. (Sorry i am no > sending a screenshot) so there is the root " / " paritions among with "/var", > "/tmp", "/usr" and "/dev". Now all of them shows a normal output for "usage" > and "Full%" and for "size" but "/dev" has the following attributes: device: > "devfs" (where others: "/dev/..." are having the path) - Type: " ? " (w > Spiros P. > > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- I sense much NT in you. NT leads to Bluescreen. Bluescreen leads to downtime. Downtime leads to suffering. NT is the path to the darkside. Powerful Unix is. Public Key: ftp://ftp.tallye.com/pub/lorenl_pubkey.asc Fingerprint: B3B9 D669 69C9 09EC 1BCD 835A FAF3 7A46 E4A3 280C ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: re portmanager, how to prevent upgrade of held ports
On Friday 31 December 2004 23:32, Michael C. Shultz wrote: > On Friday 31 December 2004 09:49 am, nbco wrote: > > Any ideas as to how to make portmanager ignore held ports? > If you were to move /var/db/pkg/openoffice-1.1.4.20041101_1 (assuming > that is the version you have installed) directory to someplace safe, > like in your home directory then portmanager nor any part of the > ports system would know openoffice-1.1.4.20041101_1 is installed. > This will only work for a port that is not a dependency for another > port so only if no other ports depend on openoffice-1.1.4.20041101_1 > will this work. When you want to upgrade it then move the directory > back > to /var/db/pkg. > > You can also create a ports/local/editors/openoffice-1.1which is a > bit more involved and way more elegant, I will be happy to explain > only if you are truly interested. Many thanks, the first option worked perfectly, inelegant though it may be. .nbco ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
4.10, USB driver problems
For several months I've been using an external USB hard drive, under 4.10 and the EHCI driver. It's worked perfectly for months. As of a month ago, when I swapped the drive for another one, the drive has not worked properly. A few days ago, my employer went on-site (the server is colocated) to swap the drive. The new drive had the same problem, and rebooting the server did not correct the problem. It was also reported that the last time he unplugged the drive (the fs on the drive was not mounted) the system crashed; he has since not plugged in the drive. Now the details... dmesg shows that it found a mass storage device and properly identifies it, and usbdevs also reports the drive; however, attempting to mount the drive causes "mount: /dev/da0s1e: Device not configured" and the message "umass0: BBB reset failed, TIMEOUT" appears in the dmesg. The external drive uses device usb4, since usb0 through usb3 are reported as USB1. It was suggested that having both the USB1 (uhci) and USB2 (ehci) driver may be causing confusion in the kernel. I find this unlikely, though, since it's been working for months. Any thoughts or troubleshooting tips? __ Do you Yahoo!? Yahoo! Mail - now with 250MB free storage. Learn more. http://info.mail.yahoo.com/mail_250 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Please help: burncd errors
Hello all: I'm trying to burn an iso image containing a folder of mp3 files. I'm using FreeBSD 5.3 and I'm using my Pioneer DVR-A06 DVD / CD Writer: -bash-2.05b$ dmesg | grep acd acd0: DVDR at ata0-master UDMA33 I'm using burncd as the handbook' chapter 16 explains but I obtain the following error: 192# burncd -t -f /dev/acd0 audio mp3_1.iso fixate next writeable LBA 568 writing from file mp3_1.iso size 771328 KB written this track 955 KB (0%) total 955 KB only wrote -1 of 37632 bytes: Device busy I've tried with several speeds as suggested on the www but the result was the same. It seems this is an old known error. Can someone help me please ? Thanks and Happy New Year, Xinizul ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Please help: burncd errors
On Sat, Jan 01, 2005 at 04:21:54PM +0100, Xinizul Xinizul wrote: > 192# burncd -t -f /dev/acd0 audio mp3_1.iso fixate An iso file is not audio, but data. Try this instead: # burncd -f /dev/acd0 -s 4 data mp3_1.iso fixate > Xinizul Happy New Year, cpghost. -- Cordula's Web. http://www.cordula.ws/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Compiling FreeBSD 4.10 kernel with gcc native and gcc-3.4.3
On Saturday, 1. January 2005 12:22, [EMAIL PROTECTED] wrote: > 2:) Why FreBSD 4.10 is using such an old compiler? Because it is a stable branch, and upgrading the compiler would break binary compatibility all over the place. > 3:) Has anybody tested FreeBSD 4.10 with gcc-3.4.X? Compiling FreeBSD 4.x kernels and userland with gcc 3.x is unsupported. If you want to do it, you're on your own. P.S.: Please tone down the crossposting. -- ,_, | Michael Nottebrock | [EMAIL PROTECTED] (/^ ^\) | FreeBSD - The Power to Serve | http://www.freebsd.org \u/ | K Desktop Environment on FreeBSD | http://freebsd.kde.org pgpLQgzbfnlfy.pgp Description: PGP signature
Re: Please help: burncd errors
On Sat, 01 Jan 2005 16:21:54 +0100 Xinizul Xinizul <[EMAIL PROTECTED]> wrote: Hi. > I'm trying to burn an iso image containing a folder of mp3 files. [...] > 192# burncd -t -f /dev/acd0 audio mp3_1.iso fixate [...] For one, if you are attempting to burn a data CD, you want to use the 'data' option passed to burncd rather than 'audio'. Use this for burning ISO's. If you truly wish to burn an audio CD, you'll first need to convert your mp3's to wav's - I generally do this using mplayer with the -ao pcm option, at which point, you can happily use the 'audio' option for burncd with the list of wav's to burn. - John. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Good General Purpose Text Markup Language
I'll need paragraphs, bold, italics, superscripts for TM, and hyperlinks, but probably not much more. I think I would use an entity ref for TM. For example in html it would be ™ _ FREE pop-up blocking with the new MSN Toolbar - get it now! http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Good General Purpose Text Markup Language
On Sat, Jan 01, 2005 at 08:11:14PM +0430, Lee Harr wrote: > >I'll need paragraphs, bold, italics, > >superscripts for TM, and hyperlinks, but probably not much more. > > I think I would use an entity ref for TM. For example in > html it would be ™ Actually, aren't all entity refs like that based off of unicode and, therefore, identical for all sgml/xml based markup languages? > > _ > FREE pop-up blocking with the new MSN Toolbar - get it now! > http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/ > > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- I sense much NT in you. NT leads to Bluescreen. Bluescreen leads to downtime. Downtime leads to suffering. NT is the path to the darkside. Powerful Unix is. Public Key: ftp://ftp.tallye.com/pub/lorenl_pubkey.asc Fingerprint: B3B9 D669 69C9 09EC 1BCD 835A FAF3 7A46 E4A3 280C ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: iTunes server setup not going well
On Fri, 31 Dec 2004, Chris wrote: Timothy Luoma wrote: On Dec 31, 2004, at 8:34 PM, Chris wrote: Somewhat related - is there a port that will play the files downloaded from ITunes? I think the answer is no. Protected AAC files can only be played in iTunes, I believe. TjL I sorta thought so - Oh well, so much for my collection that sit on my Windows box... It *might* be worth having a look at at the hymn project http://hymn-project.org/ however i dont have an ipod or use itumes so i havent realy looked at this past the front screen. -- Best regards, Chris Complex problems have simple, easy-to-understand wrong answers. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Please help: burncd errors
Oh , In fact I have converted my mp3 files to wav following a tutorial I found on the net -using mplayer too- I just want to burn them and I thought this was the way (1st create an ISO, 2nd burn the ISO) Anyway I have the same problem: 192# burncd -t -f /dev/acd0 audio *.wav fixate next writeable LBA 1136 writing from file 001_Niña_Pastori_principio.wav size 12072 KB written this track 955 KB (7%) total 955 KB only wrote -1 of 37632 bytes: Device busy next writeable LBA 1704 writing from file 002_Niña_Pastori_espinas.wav size 37504 KB written this track 955 KB (2%) total 1911 KB only wrote -1 of 37632 bytes: Device busy Any clue ? Could it be due to th HW I have ? On Sat, 1 Jan 2005 10:37:54 -0500, John Wilson <[EMAIL PROTECTED]> wrote: > On Sat, 01 Jan 2005 16:21:54 +0100 > Xinizul Xinizul <[EMAIL PROTECTED]> wrote: > > Hi. > > > I'm trying to burn an iso image containing a folder of mp3 files. > [...] > > 192# burncd -t -f /dev/acd0 audio mp3_1.iso fixate > [...] > > For one, if you are attempting to burn a data CD, you want to use the > 'data' option passed to burncd rather than 'audio'. Use this for burning > ISO's. > > If you truly wish to burn an audio CD, you'll first need to convert your > mp3's to wav's - I generally do this using mplayer with the -ao pcm option, > at which point, you can happily use the 'audio' option for burncd with the > list of wav's to burn. > > - John. > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: apache core dump
On Fri, Dec 31, 2004 at 07:21:55PM -0800, whitevamp wrote: > ok the otherday i had an issue with apache not binding to port 80 > > and i thought i got that taken care of, well maby i have but any > way i knoticed that apache wasnt running any more so i when to > start it and it whouldnt start so i looked in the error log didnt > find anything wrong in there so i looked in messages and i found > this Dec 31 19:00:04 vampextream kernel: pid 88555 (httpd), uid > 80: exited on signal 11 > > so now its core dumping .. so my quistions are 1. how do i go > about debugging this? 2. and what would be causeing this? > > if you need any more information let me know > > vampextream# uname -a > FreeBSD vampextream.com 5.3-RELEASE-p2 FreeBSD 5.3-RELEASE-p2 #3: Wed Dec 8 > 20:33:13 PST 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/VAMPEXTREAM i386 > vampextream# httpd -v > Server version: Apache/1.3.33 (Unix) > Server built: Nov 3 2004 17:24:07 > vampextream# > > > and all these issue arived after upgradeing apache , well the > entire ports collection i have installed. Asking in [EMAIL PROTECTED] would be the best place for your questions. -Kirill pgp9zdRyuYb9i.pgp Description: PGP signature
Re: Please help: burncd errors
On Sat, Jan 01, 2005 at 10:37:54AM -0500, John Wilson wrote: > On Sat, 01 Jan 2005 16:21:54 +0100 > Xinizul Xinizul <[EMAIL PROTECTED]> wrote: > > Hi. > > > I'm trying to burn an iso image containing a folder of mp3 files. > [...] > > 192# burncd -t -f /dev/acd0 audio mp3_1.iso fixate > [...] > > For one, if you are attempting to burn a data CD, you want to use the > 'data' option passed to burncd rather than 'audio'. Use this for burning > ISO's. > > If you truly wish to burn an audio CD, you'll first need to convert your > mp3's to wav's - I generally do this using mplayer with the -ao pcm option, > at which point, you can happily use the 'audio' option for burncd with the > list of wav's to burn. Exactly. CDs that are burned with the 'audio' option SHOULD be readable in every CD player. 'data' CDs with MP3 files MAY be readable in modern CD- or DVD-Players with MP3 capability as well. Since this is not standardized, you should consider using ISO9660 with RockRidge and Joliet extentions when making the CD image: $ mkisofs -v -r -T -J -o /var/tmp/mp3_1.iso /path/to/mp3s # burncd -f /dev/acd0 -s 4 data /var/tmp/mp3_1.iso fixate keeping the hierarchy below /path/to/mp3s as flat as possible, using .mp3 extensions for the mp3 files, not putting too many files per folder and using conservative sampling rates that are recognized by most hardware players (128 kbps, 44000). > - John. Regards, -cpghost. -- Cordula's Web. http://www.cordula.ws/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: alt-ctrl-{9,10,...} doesn't work
"Theodore D. Sternberg" <[EMAIL PROTECTED]> writes: > My 5.3 (Xorg 6.7) system doesn't want to switch between X sessions. > Or rather, it does the first few times after a reboot, but then > refuses. I hadn't tried multiple X sessions under Xorg 6.7 (I've gone to 6.8 now). I can't reproduce the problem. Try going to text consoles instead of to another X session; that may help determine if you're actually having problems with X, or if the virtual terminals are the trouble. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: boot stuff in dmesg?
[EMAIL PROTECTED] (John Conover) writes: > I get the following in the boot log from 5.2.1: > > unknown: can't assign resources (port) > unknown: can't assign resources (memory) > unknown: can't assign resources (port) > unknown: can't assign resources (irq) > unknown: can't assign resources (port) > unknown: can't assign resources (port) > unknown: can't assign resources (port) > unknown: can't assign resources (port) > > Is that anything to be concerned about? Not if your devices are working. -- Lowell Gilbert, embedded/networking software engineer, Boston area http://be-well.ilk.org/~lowell/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Please help: burncd errors
On Sat, Jan 01, 2005 at 05:00:20PM +0100, Xinizul Xinizul wrote: > 192# burncd -t -f /dev/acd0 audio *.wav fixate > next writeable LBA 1136 > writing from file 001_Ni?a_Pastori_principio.wav size 12072 KB > written this track 955 KB (7%) total 955 KB > only wrote -1 of 37632 bytes: Device busy 1. Are you sure you want to test write only (-t)? 2. Are you using the correct device? (/dev/acd0) 3. Have you tried different writing speeds? (-s N)? 4. Are there any kernel messages (dmesg)? -cpghost. -- Cordula's Web. http://www.cordula.ws/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Please help: burncd errors
Well first of all thanks for your help ... 1. I use -t flag since I tested before wothout this flag and the same error happened. 2. I think I'm using the right device: 192# dmesg | grep acd0 acd0: DVDR at ata0-master UDMA33 3. Yes I tested since I saw some post on the www referencing to this but the same. 4. No. Could I use another burner tool ? On Sat, 1 Jan 2005 17:24:00 +0100, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > On Sat, Jan 01, 2005 at 05:00:20PM +0100, Xinizul Xinizul wrote: > > 192# burncd -t -f /dev/acd0 audio *.wav fixate > > next writeable LBA 1136 > > writing from file 001_Ni?a_Pastori_principio.wav size 12072 KB > > written this track 955 KB (7%) total 955 KB > > only wrote -1 of 37632 bytes: Device busy > > 1. Are you sure you want to test write only (-t)? > 2. Are you using the correct device? (/dev/acd0) > 3. Have you tried different writing speeds? (-s N)? > 4. Are there any kernel messages (dmesg)? > > -cpghost. > > -- > Cordula's Web. http://www.cordula.ws/ > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Please help: burncd errors
On Sat, Jan 01, 2005 at 05:35:39PM +0100, Xinizul Xinizul wrote: > 2. I think I'm using the right device: > > 192# dmesg | grep acd0 > acd0: DVDR at ata0-master UDMA33 I asked this because it happed to me as well. I had two drives in the box, and kept trying to use the one with had a mounted CD in it :-) > Could I use another burner tool ? Of course. You can try cdrecord from /usr/ports/sysutils/cdrtools. For this to work, you need to add device atapicam to your kernel config file, recompile, reinstall and reboot the kernel. Once you've done that, you should see a device 'cd0' in dmesg and /dev. You can try burncd on /dev/cd0, or cdrecord with the appropriate SCSI ID: # cdrecord -scanbus should then give you the correct SCSI ID a,b,c to use. # cdrecord -v dev=a,b,c speed=4 mp3_1.iso for data CDs. # cdrecord -v dev=a,b,c speed=1 -audio track*.wav for audio CDs. Good luck! -cpghost. -- Cordula's Web. http://www.cordula.ws/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Please help: burncd errors
Xinizul Xinizul wrote: Could I use another burner tool ? k3b is quite nice imho, see : /usr/ports/sysutils/k3b although i wonder how to make it work properly for a regular user (not only root) this email about k3b might be useful by the way : http://lists.freebsd.org/pipermail/freebsd-ports/2004-September/016131.html ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Programming with Bourne or C shell
On Fri, 31 Dec 2004 21:20:22 -0600 Michael Madden <[EMAIL PROTECTED]> wrote: > I have most of my interactive shell experience using bash on Linux > and shell programing on Unix-like systems with Bourne shell. Since > FreeBSD's default shell is csh/tcsh, I was wondering if it's still > considered an atrocity to develop shell scripts with C shell: > > http://www.faqs.org/faqs/unix-faq/shell/csh-whynot/ > > Are most FreeBSD users still using csh or tcsh has their interactive > shell and sh for programming? I think it would be nice to use the > same interactive and programming shell for consistency. Unless you want something with interactive features and want something in the base, I really don't see much of a reason to choose tcsh. It can make a nice tuner control script using hotkeys and ect, but not much else. Tcsh if you ever try scripting in it will become a PITA with the lack of functions and a few other things. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Problems with digital camera
Hoping that someone can see what I may be overlooking. I've got a Nikon CoolPix 885 that I'm attempting to connect to my FreeBSD 5.3-RELEASE machine via it's USB connector to a D-Link 7-port USB hub. The hub itself is connected via one of two USB ports on the tower. I have the following in /boot/loader.conf: salamander# cat /boot/loader.conf snd_emu10k1_load="YES" usb_load="YES" # USB support ums_load="YES" # USB mouse umass_load="YES" # USB Zip 100 drive Or Camera and the following in my /etc/rc.conf: salamander# cat /etc/rc.conf # -- sysinstall generated deltas -- # Mon Dec 6 13:36:23 2004 # Created: Mon Dec 6 13:36:23 2004 # Enable network daemons for user convenience. # Please make all changes to this file, not to /etc/defaults/rc.conf. # This file now contains just the overrides from /etc/defaults/rc.conf. hostname="salamander.thesizemores.net" ifconfig_vr0="DHCP" linux_enable="YES" moused_enable="YES" usbd_enable="YES" sendmail_enable="YES" sendmail_flags="-bd" sendmail_pidfile="/var/spool/postfix/pid/master.pid" sendmail_outbound_enable="NO" sendmail_submit_enable="NO" sendmail_msp_queue_enable="NO" devfs_system_ruleset="local_ruleset" and this in a /etc/devfs.rules file that I created per another post I saw on the forum: [local_ruleset=10] add path 'ugen*' mode 664 The following lines appear in my /sys/i386/conf/GENERIC file (this is out-of-the-box, I have not recompiled the kernel since initial install): # USB support device uhci# UHCI PCI->USB interface device ohci# OHCI PCI->USB interface device usb # USB Bus (required) #device udbp# USB Double Bulk Pipe devices device ugen# Generic device uhid# "Human Interface Devices" device ukbd# Keyboard device ulpt# Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device urio# Diamond Rio 500 MP3 player device uscanner# Scanners # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass# Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) However, when I connect my camera via the USB connector and turn it on, I get no messages in dmesg and usbdevs shows salamander# usbdevs addr 1: UHCI root hub, VIA addr 1: UHCI root hub, VIA addr 1: UHCI root hub, VIA What have I missed? I assumed with the latter configured as I've outlined, I should be able to have the camera plugged in on a running system, see it detected, and then mount. Later I could add an entry to fstab for the device to make this a little easier. -- Cheers, Trey --- Adversity is the trial of principle. Without it, a man hardly knows whether he is honest or not. -- Henry Fielding 12:17PM up 4 days, 14:54, 0 users, load averages: 0.19, 0.14, 0.06 FreeBSD salamander.thesizemores.net 5.3-RELEASE i386 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: portupgrade vs. portmanager
On Saturday 01 January 2005 04:30 am, Dick Hoogendijk wrote: > On 28 Dec Michael C. Shultz wrote: > > Portmanager only addresses that one issue and for the forseeable > > future that is where all the focus will be, only on correctly > > updating ports. > > Am I to understand correctly that portmanager _always_ updates ALL > the old ports? A 'pormanager -u sylpheed' is not possible then? correct, for now. I like the idea of what your suggestion though I think, if you mean being able to upgrade on port and its dependencies. -Mike ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problems with digital camera
On 01/01/05 12:22 PM, Trey Sizemore sat at the `puter and typed: > Hoping that someone can see what I may be overlooking. I've got a Nikon > CoolPix 885 that I'm attempting to connect to my FreeBSD 5.3-RELEASE > machine via it's USB connector to a D-Link 7-port USB hub. The hub > itself is connected via one of two USB ports on the tower. I have the > following in /boot/loader.conf: > > > > salamander# cat /boot/loader.conf > snd_emu10k1_load="YES" > usb_load="YES" # USB support > ums_load="YES" # USB mouse > umass_load="YES" # USB Zip 100 drive Or Camera > > > > and the following in my /etc/rc.conf: > > > > salamander# cat /etc/rc.conf > # -- sysinstall generated deltas -- # Mon Dec 6 13:36:23 2004 > # Created: Mon Dec 6 13:36:23 2004 > # Enable network daemons for user convenience. > # Please make all changes to this file, not to /etc/defaults/rc.conf. > # This file now contains just the overrides from > /etc/defaults/rc.conf. > hostname="salamander.thesizemores.net" > ifconfig_vr0="DHCP" > linux_enable="YES" > moused_enable="YES" > usbd_enable="YES" > sendmail_enable="YES" > sendmail_flags="-bd" > sendmail_pidfile="/var/spool/postfix/pid/master.pid" > sendmail_outbound_enable="NO" > sendmail_submit_enable="NO" > sendmail_msp_queue_enable="NO" > devfs_system_ruleset="local_ruleset" > > > > and this in a /etc/devfs.rules file that I created per another post I > saw on the forum: > > > > [local_ruleset=10] > add path 'ugen*' mode 664 > > > > The following lines appear in my /sys/i386/conf/GENERIC file (this is > out-of-the-box, I have not recompiled the kernel since initial install): > > > > # USB support > deviceuhci# UHCI PCI->USB interface > deviceohci# OHCI PCI->USB interface > deviceusb # USB Bus (required) > #device udbp# USB Double Bulk Pipe devices > deviceugen# Generic > deviceuhid# "Human Interface Devices" > deviceukbd# Keyboard > deviceulpt# Printer > deviceumass # Disks/Mass storage - Requires > scbus and da > deviceums # Mouse > deviceurio# Diamond Rio 500 MP3 player > deviceuscanner# Scanners > > # SCSI peripherals > device scbus # SCSI bus (required for SCSI) > device ch # SCSI media changers > device da # Direct Access (disks) > device sa # Sequential Access (tape etc) > device cd # CD > device pass# Passthrough device (direct SCSI > access) > device ses # SCSI Environmental Services (and > SAF-TE) > > > > > However, when I connect my camera via the USB connector and turn it on, > I get no messages in dmesg and usbdevs shows > > > > salamander# usbdevs > addr 1: UHCI root hub, VIA > addr 1: UHCI root hub, VIA > addr 1: UHCI root hub, VIA > > > > What have I missed? I assumed with the latter configured as I've > outlined, I should be able to have the camera plugged in on a running > system, see it detected, and then mount. Later I could add an entry to > fstab for the device to make this a little easier. I have that same model. I never bothered to try hooking it directly to the USB port. The camera uses CompactFlash cards, so I picked up a SanDisk USB reader (Sandisk PN: SDDR-31) and hooked it to the USB port. All I needed in the kernel config was the umass device, which it sounds like you already have. Then I just mount the inserted card as a dos partition (usually /dev/da0s1) and I can move pics to my filesystem (mv, not cp). This c
Re: Problems with digital camera
On Sat, 2005-01-01 at 12:53 -0500, Louis LeBlanc wrote: > I have that same model. I never bothered to try hooking it directly > to the USB port. The camera uses CompactFlash cards, so I picked up a > SanDisk USB reader (Sandisk PN: SDDR-31) and hooked it to the USB > port. All I needed in the kernel config was the umass device, which > it sounds like you already have. > > Then I just mount the inserted card as a dos partition (usually > /dev/da0s1) and I can move pics to my filesystem (mv, not cp). This cleans > out the card and preserves the timestamp on the file, so I don't have > to otherwise mar my pic with an auto date label to know when I took > it. > > Another advantage, is you can buy a couple cards, and the camera isn't > tied down for the upload. > > What may (or may not) be related, is that I have to have the reader > mounted prior to boot, or the /dev/da0 device doesn't show in the /dev > partition. When the card in inserted, it's detected and the > /dev/da0s1 device appears. There may be a way to get the USB device > to rescan, but I'm not that fluent with USB. > > I had the same setup on FreeBSD versions, 4.8, 4.9, 4.10, and now 5.3 > RELEASE. Works like a charm. And yes, I bought mine way back when it > cost a good months rent :| > > Good luck. > Lou Months rent...same here ;-) I have a SanDisk reader as well. Are you saying you plug the card in the SanDisk reader and *then* boot? It won't work "on-the-fly"? -- Cheers, Trey --- There is an innocence in admiration; it is found in those to whom it has not yet occurred that they, too, might be admired some day. - Friedrich Nietzsche 1:11PM up 4 days, 15:48, 0 users, load averages: 0.04, 0.06, 0.06 FreeBSD salamander.thesizemores.net 5.3-RELEASE i386 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
sharing printers with Mac - Rendezvous?
I've been trying to find information on how to setup printer sharing so that I can print from a Mac to a FreeBSD machine on the same LAN. Everything I find seems to revolve around the announcement for Rendezvous, but it's mostly PR and little actual information. The question I can't seem to find an answer to is: What's the easiest way to setup a printer (USB connected to FreeBSD) so I can print from a Mac to it? (the FreeBSD machine has a static IP, if that helps) Any help, including good pointers? I'm familiar with CUPS from Mac OS X so I'm going to try to explore that as a possibility. TjL ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problems with digital camera
On 01/01/05 01:13 PM, Trey Sizemore sat at the `puter and typed: > On Sat, 2005-01-01 at 12:53 -0500, Louis LeBlanc wrote: > > > I have that same model. I never bothered to try hooking it directly > > to the USB port. The camera uses CompactFlash cards, so I picked up a > > SanDisk USB reader (Sandisk PN: SDDR-31) and hooked it to the USB > > port. All I needed in the kernel config was the umass device, which > > it sounds like you already have. > > > > Then I just mount the inserted card as a dos partition (usually > > /dev/da0s1) and I can move pics to my filesystem (mv, not cp). This cleans > > out the card and preserves the timestamp on the file, so I don't have > > to otherwise mar my pic with an auto date label to know when I took > > it. > > > > Another advantage, is you can buy a couple cards, and the camera isn't > > tied down for the upload. > > > > What may (or may not) be related, is that I have to have the reader > > mounted prior to boot, or the /dev/da0 device doesn't show in the /dev > > partition. When the card in inserted, it's detected and the > > /dev/da0s1 device appears. There may be a way to get the USB device > > to rescan, but I'm not that fluent with USB. > > > > I had the same setup on FreeBSD versions, 4.8, 4.9, 4.10, and now 5.3 > > RELEASE. Works like a charm. And yes, I bought mine way back when it > > cost a good months rent :| > > > > Good luck. > > Lou > > Months rent...same here ;-) > > I have a SanDisk reader as well. Are you saying you plug the card in > the SanDisk reader and *then* boot? It won't work "on-the-fly"? No, my reader has to be plugged in at boot, but inserting the card works on the fly. Your device may be different, but mine has always been /dev/da0s1 for the card itself. The /dev partition is pretty manageable in 5.3, so you might try an ls /dev and look for /dev/da0*. It might just jump out at you. I do an ls before inserting the card, and I see da0, but not da0s1. After inserting the card, da0s1 is there. Sometimes it's instantaneous, other times it takes a couple attempts to mount, but it works. Perhaps someone else on the list will know how to get the reader detected on the fly without a reboot, or perhaps the command to check the reader for an inserted card? I had thought camcontrol was it, but it doesn't seem to recognize that the card was removed. Lou -- Louis LeBlanc [EMAIL PROTECTED] Fully Funded Hobbyist, KeySlapper Extrordinaire :) http://www.keyslapper.org ԿԬ Captain's Log, star date 21:34.5... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problems with digital camera
On Sat, 2005-01-01 at 13:43 -0500, Louis LeBlanc wrote: > On 01/01/05 01:13 PM, Trey Sizemore sat at the `puter and typed: > > On Sat, 2005-01-01 at 12:53 -0500, Louis LeBlanc wrote: > > > > > I have that same model. I never bothered to try hooking it directly > > > to the USB port. The camera uses CompactFlash cards, so I picked up a > > > SanDisk USB reader (Sandisk PN: SDDR-31) and hooked it to the USB > > > port. All I needed in the kernel config was the umass device, which > > > it sounds like you already have. > > > > > > Then I just mount the inserted card as a dos partition (usually > > > /dev/da0s1) and I can move pics to my filesystem (mv, not cp). This > > > cleans > > > out the card and preserves the timestamp on the file, so I don't have > > > to otherwise mar my pic with an auto date label to know when I took > > > it. > > > > > > Another advantage, is you can buy a couple cards, and the camera isn't > > > tied down for the upload. > > > > > > What may (or may not) be related, is that I have to have the reader > > > mounted prior to boot, or the /dev/da0 device doesn't show in the /dev > > > partition. When the card in inserted, it's detected and the > > > /dev/da0s1 device appears. There may be a way to get the USB device > > > to rescan, but I'm not that fluent with USB. > > > > > > I had the same setup on FreeBSD versions, 4.8, 4.9, 4.10, and now 5.3 > > > RELEASE. Works like a charm. And yes, I bought mine way back when it > > > cost a good months rent :| > > > > > > Good luck. > > > Lou > > > > Months rent...same here ;-) > > > > I have a SanDisk reader as well. Are you saying you plug the card in > > the SanDisk reader and *then* boot? It won't work "on-the-fly"? > > No, my reader has to be plugged in at boot, but inserting the card > works on the fly. Your device may be different, but mine has always > been /dev/da0s1 for the card itself. > > The /dev partition is pretty manageable in 5.3, so you might try an > ls /dev > and look for /dev/da0*. It might just jump out at you. I do an ls > before inserting the card, and I see da0, but not da0s1. After > inserting the card, da0s1 is there. Sometimes it's instantaneous, > other times it takes a couple attempts to mount, but it works. > > Perhaps someone else on the list will know how to get the reader > detected on the fly without a reboot, or perhaps the command to check > the reader for an inserted card? > > I had thought camcontrol was it, but it doesn't seem to recognize that > the card was removed. > > Lou Well, I've removed the entries in /boot/loader.conf (seemed redundant), connected the SanDisk with card to the desktop, and rebooted. Here is the output of dmesg (I also have a Epson Stylus C84 connected to the USB hub and it doesn't appear to be detected either): Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-RELEASE #0: Fri Nov 5 04:19:18 UTC 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2800.12-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebf9ff real memory = 536805376 (511 MB) avail memory = 515616768 (491 MB) npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 agp0: mem 0xe000-0xe3ff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) pcm0: port 0xe800-0xe81f irq 11 at device 9.0 on pci0 pcm0: fwohci0: mem 0xd000-0xdfff irq 11 at device 10.0 on pci0 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:00:4c:02:00:00:00:90 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:00:4c:00:00:90 fwe0: Ethernet address: 02:00:4c:00:00:90 fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) uhci0: port 0xdc00-0xdc1f irq 5 at device 16.0 on pci0 uhci0: [GIANT-LOCKED] usb0:
RE: Compiling FreeBSD 4.10 kernel with gcc native and gcc-3.4.3
> -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of > [EMAIL PROTECTED] > Sent: Saturday, January 01, 2005 3:22 AM > To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; > freebsd-questions@freebsd.org > Subject: Compiling FreeBSD 4.10 kernel with gcc native and gcc-3.4.3 > > > 2:) Why FreBSD 4.10 is using such an old compiler? GCC has a long and bloody history of compiler bugs. The Project doesen't switch compiler versions until a newer version has been out for several years at least. Ted ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
External USB Harddrive
Hi, I am using Asus A7N8X Rev 1.06 motherboard on FreeBSD 5.3 release. I want to use my USB hard drive. It would be the first USB device I use. What is the procedure? Here is what seems to be a related dmesg output: usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 usb1: OHCI version 1.0, legacy support usb1: on ohci1 usb1: USB revision 1.0 umass0: Western Digital USB Hard Drive, rev 2.00/11.05, addr 3 da0 at umass-sim0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C) I think the drive is probably NTFS formatted. If it is not NTFS it is FAT32. I don't remember the drive specs, but it can do better than USB 1.0. signature.asc Description: This is a digitally signed message part
bad display name/xserver question
I'm running 5.3-RELEASE-p2. I am unable to open a terminal window in either windowmaker or the default twm window manager. No error messages go to the log files. However after x crashes there will be output messages to the screen along these lines: Xauth: (argu):1: bad display name "nedsbsd.cox.net : 0" in "list" command The nedsbsd is something I'm willing to change if needed. I entered it months ago when I initially installed FreeBSD didn't know what the install program was asking for when it asked for a display name. I figured I could change it later. I neglected to change it when it seamed to not cause problems. Any suggestions will be appreciated. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
xorg/dri-6.2_1,2 upgrade problems
Thanks again. I'll try the portmanager. I read through a discussion of it in freebsd-questions, but didn't have a command example to try. (Thanks for your command suggestion for portmanager.) For portupgrade I have paper copies of the man page and paper copy of an article which I cross reference before running it. You are right on dependencies not being built. I had to pkg_delete qt and rebuild it from ports in order to upgrade kde. Before seeing your message I ran portupgrade on xorg using the -frR switch. X seams to be working now, somewhat. I use windowmaker as the desktop windowmanager for the root. Entering the command "startx" as root, windowmaker starts up and looks fine. However, I can't open a terminal window in it. The default twm windowmanager crashes. No error messages go to the log but I get a line: Xauth: (argv):1 bad display name "nedsbsd.cox.net:0" in "list" command and two others of like nature as messages after x crashes. I entered "nedsbsd" as a display name when I initially installed FreeBSD several months ago. I had no clue what it the install program was asking for at that time and figured I could change it later. It didn't seam to cause any problems so I neglected to change it. I generally cvsup my ports and fetch the index right before I do any upgrading. Even if it's just the next day. Never know when something new is going to pop in that could cause a make to crash. I took down the optimizations you suggested. The lines currently have no meaning to me, so I'll need to read up a bit. I've been running FreeBSD for less than a year and I've had no computer experience or training outside very basic MS windows. So many things are new and many are incomprehensible at first look. Dispite that I feel far more comfortable and secure using FreeBSD than I ever did using Windows. That's why I'll keep plugging away. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problems with digital camera
On 01/01/05 02:01 PM, Trey Sizemore sat at the `puter and typed: > On Sat, 2005-01-01 at 13:43 -0500, Louis LeBlanc wrote: > > > > > > No, my reader has to be plugged in at boot, but inserting the card > > works on the fly. Your device may be different, but mine has always > > been /dev/da0s1 for the card itself. > > > > The /dev partition is pretty manageable in 5.3, so you might try an > > ls /dev > > and look for /dev/da0*. It might just jump out at you. I do an ls > > before inserting the card, and I see da0, but not da0s1. After > > inserting the card, da0s1 is there. Sometimes it's instantaneous, > > other times it takes a couple attempts to mount, but it works. > > > > Perhaps someone else on the list will know how to get the reader > > detected on the fly without a reboot, or perhaps the command to check > > the reader for an inserted card? > > > > I had thought camcontrol was it, but it doesn't seem to recognize that > > the card was removed. > > > > Lou > > Well, I've removed the entries in /boot/loader.conf (seemed redundant), > connected the SanDisk with card to the desktop, and rebooted. Here is > the output of dmesg (I also have a Epson Stylus C84 connected to the USB > hub and it doesn't appear to be detected either): > > > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > 1994 > The Regents of the University of California. All rights > reserved. > FreeBSD 5.3-RELEASE #0: Fri Nov 5 04:19:18 UTC 2004 > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2800.12-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > Features=0xbfebf9ff R,SSE,SSE2,SS,HTT,TM,PBE> > real memory = 536805376 (511 MB) > avail memory = 515616768 (491 MB) > npx0: [FAST] > npx0: on motherboard > npx0: INT 16 interface > acpi0: on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: on acpi0 > acpi_button0: on acpi0 > pcib0: port 0xcf8-0xcff on acpi0 > pci0: on pcib0 > agp0: mem 0xe000-0xe3ff at > device 0.0 on pci0 > pcib1: at device 1.0 on pci0 > pci1: on pcib1 > pci1: at device 0.0 (no driver attached) > pcm0: port 0xe800-0xe81f irq 11 at device 9.0 on > pci0 > pcm0: > fwohci0: mem 0xd000-0xdfff irq 11 at device > 10.0 on pci0 > fwohci0: OHCI version 1.10 (ROM=1) > fwohci0: No. of Isochronous channels is 4. > fwohci0: EUI64 00:00:4c:02:00:00:00:90 > fwohci0: Phy 1394a available S400, 2 ports. > fwohci0: Link S400, max_rec 2048 bytes. > firewire0: on fwohci0 > fwe0: on firewire0 > if_fwe0: Fake Ethernet address: 02:00:4c:00:00:90 > fwe0: Ethernet address: 02:00:4c:00:00:90 > fwe0: if_start running deferred for Giant > sbp0: on firewire0 > fwohci0: Initiate bus reset > fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode > firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) > firewire0: bus manager 0 (me) > uhci0: port 0xdc00-0xdc1f irq 5 at device > 16.0 on pci0 > uhci0: [GIANT-LOCKED] > usb0: on uhci0 > usb0: USB revision 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: port 0xe000-0xe01f irq 11 at > device 16.1 on pci0 > uhci1: [GIANT-LOCKED] > usb1: on uhci1 > usb1: USB revision 1.0 > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: port 0xe400-0xe41f irq 11 at > device 16.2 on pci0 > uhci2: [GIANT-LOCKED] > usb2: on uhci2 > usb2: USB revision 1.0 > uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > pci0: at device 16.3 (no driver attached) > isab0: at device 17.0 on pci0 > isa0: on isab0 > atapci0: port > 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on p > ci0 > ata0: channel #0 on atapci0 > ata1: channel #1 on atapci0 > vr0: port 0xd800-0xd8ff mem > 0xdfffee00-0xdfffeeff irq 5 at device 18.0 on pci0 > miibus0: on vr0 > ukphy0: on miibus0 > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > vr0: Ethernet address: 00:0a:e6:6e:73:95 > acpi_button1: on acpi0 > fdc0: port 0x3f7,0x3f4-0x3f5,0x3f2-0x3
Re: Problems with digital camera
On Sat, 2005-01-01 at 15:20 -0500, Louis LeBlanc wrote: > That's strange. Did you have the umass device detected before > removing the loader.conf entries? I don't have any usb related > entries in loader.conf myself, so I don't see why you'd have trouble. Nope, haven't seen it there. > > What about the da device in your kernel config? I imagine you do have > it since umass requires it . . . da is there > > This is what I see in my dmesg: > usb0: on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > umass0: SanDisk Corporation ImageMate CompactFlash USB, rev 1.10/0.09, addr 2 > umass0: Get Max Lun not supported (STALLED) > > BTW, I never bothered to keep a card in the reader when booting. It's > always been sufficient to keep the reader itself plugged in. > > What model is your reader? UMASS(4) lists a few that are explicitly > supported, and mine is in the list; is yours? SanDisk ImageMate SDDR-31 I think. > > Sorry I can't help with the Epson. I stick to network printers when > possible. Much less hassle. > > Lou -- Cheers, Trey --- If there is a sin against life, it consists perhaps not so much in despairing of life as in hoping for another life and in eluding the implacable grandeur of this life. -- Albert Camus 3:26PM up 2:09, 0 users, load averages: 0.08, 0.05, 0.02 FreeBSD salamander.thesizemores.net 5.3-RELEASE i386 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problems with digital camera
I have a canon Powershot G3 which works out of the box with FreeBSD 5.3 (GENERIC). I use /usr/ports/graphics/gphoto2 to grab the pictures off of my camera. $ dmesg ugen0: Canon Inc. Canon Digital Camera, rev 1.10/0.01, addr 2 $ sudo gphoto2 -P The above command copies all pictures from camera to the current working directory. -- ~michael ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
courier-imap installation
Hey everyone, I'm a n00b to FreeBSD, and I'm trying to install courier-imap with 5.3, but I'm not sure what steps I should be taking. I did: pkg_add -r courier-imap However, when I do: /usr/local/libexec/courier-imap/imapd.rc start (as the courier-imap manual instructs), it gives me: /usr/local/etc/courier-imap/imapd does not exist, forgot make install-configure? Which is odd, because imapd actually seems to be in /usr/local/bin/imapd, and I would assume that courier-imap was configured properly when it was prepared as a port. I would just change the relevant line in imapd.rc, but I don't want to go mucking around with something I don't fully understand -- especially because I need this server to be extremely secure and "by the book." Also, is there a way to manage courier-imap via Webmin? Sorry if the answer is obvious or really common -- posting really is my last resort after searching this list and the web for help. Outside of this problem, I'm loving FreeBSD. It reminds me of my days running NetBSD/mac68k on my Mac IIsi. :) Thanks in advance! - ben ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: courier-imap installation
If you did from the ports tree then they'll be an rc script in /usr/local/etc/rc.d (or look in the pkg_mesg file in the directory to see exactly where it it... -- Martin On Sat, 1 Jan 2005 14:57:34 -0600, artware <[EMAIL PROTECTED]> wrote: > Hey everyone, > > I'm a n00b to FreeBSD, and I'm trying to install courier-imap with > 5.3, but I'm not sure what steps I should be taking. I did: > pkg_add -r courier-imap > However, when I do: > /usr/local/libexec/courier-imap/imapd.rc start > (as the courier-imap manual instructs), it gives me: > /usr/local/etc/courier-imap/imapd does not exist, forgot make > install-configure? > Which is odd, because imapd actually seems to be in > /usr/local/bin/imapd, and I would assume that courier-imap was > configured properly when it was prepared as a port. I would just > change the relevant line in imapd.rc, but I don't want to go mucking > around with something I don't fully understand -- especially because I > need this server to be extremely secure and "by the book." Also, is > there a way to manage courier-imap via Webmin? > > Sorry if the answer is obvious or really common -- posting really is > my last resort after searching this list and the web for help. Outside > of this problem, I'm loving FreeBSD. It reminds me of my days running > NetBSD/mac68k on my Mac IIsi. :) > > Thanks in advance! > > - ben > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Cheap NAS using FreeBSD - practical considerations?
That was operator error...and desktop systems not servers... On Wed, 29 Dec 2004 20:10:38 +0300, Andrew P. <[EMAIL PROTECTED]> wrote: > Mark wrote: > >>That's something :-) I only built a separate FreeBSD file-server because > >>I have to run Windows on my PC and I can't trust M$ software with 700Gb+ > >>of data. However, some people store many terabytes with Windows Storage > >>Server - and look what happened in UK a few weeks ago :-) > > > > What happened a few weeks ago? > > > > http://www.google.com/search?q=uk+government+windows+upgrade+down > http://news.zdnet.co.uk/software/windows/0,39020396,39175160,00.htm > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
cannot startx elf-ld.so.1 problem
Dear fellows! Happy new year to everybody! I have FreeBSD 4.10 installed! I do not know why and for what reason I got the following error message when trying to startx: XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: FreeBSD 4.10 i386 [ELF] Build Date: 29 April 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sat Jan 1 21:13:47 2005 (==) Using config file: "/etc/X11/XF86Config" /usr/libexec/ld-elf.so.1: /usr/local/lib/libintl.so.6: Undefined symbol "stpcpy" Is there anything I can do to fix it or should I reinstall FreeBSD? Thanks in advance! D.K. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: courier-imap installation
Martin, Thanks for the quick reply! I ran /usr/local/etc/rc.d/courier-imap-pop3d.sh.sample (because I'm trying to run a POP3 server) and now I get: /usr/local/etc/courier-imap/pop3d does not exist, forgot make install-configure? Where would the pkg_mesg file be? - ben On Sat, 1 Jan 2005 21:06:47 +, Martin Hepworth <[EMAIL PROTECTED]> wrote: > If you did from the ports tree then they'll be an rc script in > /usr/local/etc/rc.d > > (or look in the pkg_mesg file in the directory to see exactly where it it... > -- > Martin ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: courier-imap installation
Should I be using qpopper instead? - ben ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Compiling FreeBSD 4.10 kernel with gcc native and gcc-3.4.3
On Sat, Jan 01, 2005 at 12:01:45PM +, Edward B. Dreger wrote: > > 2:) Why FreBSD 4.10 is using such an old compiler? > > Nobody has upgraded it. What's there is stable and works; nobody has > volunteered to replace it, test, and assure that all is correct. > Efforts are going toward RELENG_5 and CURRENT. ]Note that I do not > speak in any official capacity, and am open to corrections, but would be > surprised if anyone disagreed. Actually, all the responses I've seen so far have been incorrect, or haven't mentioned the real reason. FreeBSD 4.10 is using gcc 2.95 because later versions of g++ produce incompatible object code, so we cannot update without forcing every 4.x user to recompile every piece of C++ code on their system. That's not acceptable in a -stable branch. Compiling the base system with a version of GCC other than that which is shipped with the base system (i.e. GCC 2.95 for 4.x) is not supported, and if you manage to get it working you're on your own support-wise (i.e. do not submit bug reports against your custom system, because they're probably your own bugs and you'll waste developer time trying to follow them up). If you think you really need a version of FreeBSD compiled with GCC 3.x, consider updating to FreeBSD 5.3. Kris pgpMRXoxHCGn6.pgp Description: PGP signature
Re[2]: courier-imap installation
Hi artware, Saturday, January 1, 2005, 10:18:33 PM, you made these points: > Martin, > Thanks for the quick reply! I ran > /usr/local/etc/rc.d/courier-imap-pop3d.sh.sample (because I'm trying > to run a POP3 server) and now I get: > /usr/local/etc/courier-imap/pop3d does not exist, forgot make > install-configure? damn, you should configure your server in /usr/local/etc/courier-imap and *after* the configuration you could start the pop3 server if you successfuly configured it. > Where would the pkg_mesg file be? /usr/ports/mail/courier-imap read the pkg-message file... > - ben > On Sat, 1 Jan 2005 21:06:47 +, Martin Hepworth <[EMAIL PROTECTED]> wrote: >> If you did from the ports tree then they'll be an rc script in >> /usr/local/etc/rc.d >> >> (or look in the pkg_mesg file in the directory to see exactly where it it... >> -- >> Martin -- Best Regards, +--==/\/\==--+ (__) FreeBSD | DanGer <[EMAIL PROTECTED]> |\\\'',) The | [EMAIL PROTECTED] ICQ261701668 | \/ \ ^Power | http://danger.homeunix.org | .\._/_)To +--==\/\/==--+ Serve [ Freefall Sex: Watch out for that First Step, it's a doozy! ] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re[2]: courier-imap installation
Hi artware,
Saturday, January 1, 2005, 10:18:33 PM, you contributed this to our collective
wisdom:
> Martin,
> Thanks for the quick reply! I ran
> /usr/local/etc/rc.d/courier-imap-pop3d.sh.sample (because I'm trying
> to run a POP3 server) and now I get:
> /usr/local/etc/courier-imap/pop3d does not exist, forgot make
> install-configure?
> Where would the pkg_mesg file be?
ah, there isn't any pkg-message, but from Makefile:
@${ECHO_MSG} ""
@${ECHO_MSG} "You will have to run ${DATADIR}/mkimapdcert to create"
@${ECHO_MSG} "a self-signed certificate if you want to use imapd-ssl."
@${ECHO_MSG} "And you will have to copy and edit the *.dist files to *"
@${ECHO_MSG} "in ${CONFDIR}."
@${ECHO_MSG} ""
@${ECHO_MSG} "In case you use authpam, you should put the following
lines"
@${ECHO_MSG} "in your /etc/pam.d/imap"
@${ECHO_MSG} "authrequiredpam_unix.so try_first_pass"
@${ECHO_MSG} "account requiredpam_unix.so try_first_pass"
@${ECHO_MSG} "session requiredpam_permit.so"
--
Best Regards,
+--==/\/\==--+ (__) FreeBSD
| DanGer <[EMAIL PROTECTED]> |\\\'',) The
| [EMAIL PROTECTED] ICQ261701668 | \/ \ ^Power
| http://danger.homeunix.org | .\._/_)To
+--==\/\/==--+ Serve
[ Oh no, not deja-vu again. Oh no, not deja-vu again. Oh no ]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problems with digital camera
On Sat, 2005-01-01 at 20:45 +, unixadmin99 wrote: > I have a canon Powershot G3 which works out of the box with FreeBSD > 5.3 (GENERIC). > I use /usr/ports/graphics/gphoto2 to grab the pictures off of my camera. > > $ dmesg > ugen0: Canon Inc. Canon Digital Camera, rev 1.10/0.01, addr 2 > > $ sudo gphoto2 -P > The above command copies all pictures from camera to the current > working directory. > Thanks. The problem appears to be that it is not getting recognized by the system. Even as a mass storage device. Nothing in dmesg. -- Cheers, Trey --- At a given moment I open my eyes and exist. And before that, during all eternity, what was there? Nothing. - Ugo Betti 4:41PM up 3:23, 0 users, load averages: 0.12, 0.04, 0.01 FreeBSD salamander.thesizemores.net 5.3-RELEASE i386 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: courier-imap installation
artware wrote: Should I be using qpopper instead? if you only want plain pop3 that might be a good choice, courier-imap is imap, imap-ssl, pop3 and pop3-ssl, although you can certainly choose to enable just one of them try to build it from the ports: cd /usr/ports/mail/courier-imap/ make install clean ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: External USB Harddrive
Sergei Gnezdov wrote: Hi, I am using Asus A7N8X Rev 1.06 motherboard on FreeBSD 5.3 release. I want to use my USB hard drive. It would be the first USB device I use. What is the procedure? Here is what seems to be a related dmesg output: usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 usb1: OHCI version 1.0, legacy support usb1: on ohci1 usb1: USB revision 1.0 umass0: Western Digital USB Hard Drive, rev 2.00/11.05, addr 3 da0 at umass-sim0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C) I think the drive is probably NTFS formatted. If it is not NTFS it is FAT32. I don't remember the drive specs, but it can do better than USB 1.0. Well, can't you mount it? if it is fat 32 mount_msdosfs /dev/da0s1 /mnt/ if it is ntfs mount_ntfs /dev/da0s1 /mnt/ good luck! -- Gustaaf Wijnands ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re[2]: courier-imap installation
Hello albi, Saturday, January 1, 2005, 10:48:04 PM, you wrote about: > artware wrote: >> Should I be using qpopper instead? dovecot isn't bad too, according my information, but personally i use courier-imap... > if you only want plain pop3 that might be a good choice, > courier-imap is imap, imap-ssl, pop3 and pop3-ssl, > although you can certainly choose to enable just one of them > try to build it from the ports: > cd /usr/ports/mail/courier-imap/ > make install clean -- Best Regards, +--==/\/\==--+ (__) FreeBSD | DanGer <[EMAIL PROTECTED]> |\\\'',) The | [EMAIL PROTECTED] ICQ261701668 | \/ \ ^Power | http://danger.homeunix.org | .\._/_)To +--==\/\/==--+ Serve [ Astronomers do it with even longer tubes. ] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: courier-imap installation
On Sat, Jan 01, 2005 at 02:57:34PM -0600, artware wrote: > Hey everyone, > > I'm a n00b to FreeBSD, and I'm trying to install courier-imap > with 5.3, but I'm not sure what steps I should be taking. I did: > pkg_add -r courier-imap > However, when I do: > /usr/local/libexec/courier-imap/imapd.rc start > (as the courier-imap manual instructs), it gives me: > /usr/local/etc/courier-imap/imapd does not exist, forgot make > install-configure? Did you look in the /usr/local/etc/courier-imap directory? It will contain a number of *.dist files that you will have to copy and modify to configure your installation. For example, if you want to serve imap you will have to rename imapd.dist to imapd and edit the resulting /usr/local/etc/courier-imap/imapd file so that it is configured the way you want. The file is heavily commented and the necessary changes should be trivial. > Which is odd, because imapd actually seems to be in > /usr/local/bin/imapd, and I would assume that courier-imap was That is the executable. > configured properly when it was prepared as a port. I would just It was installed properly, but quite a few ports require some post- install configuration, especially on the server side. -- Danny ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Prism GT Chipset, hostap?
Nikolas Britton wrote: Do the Prism GT chipsets support hostap mode in freebsd (does freebsd even support this chipset?)? and are there any other chipsets besides Prism 2/2.5/3? that work in hostap mode? From wi(4) (http://www.freebsd.org/cgi/man.cgi?query=wi&sektion=4&manpath=FreeBSD+4.10-RELEASE): > Cards based on the Intersil PRISM-II and PRISM-2.5 chips also have a > host-based access point mode which allows the card to act as an access > point (base station). -- Tabor Kelly [EMAIL PROTECTED] http://tabor.taborandtashell.net ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Building a custom kernel
Kövesdán Gábor wrote: Hi, I'd like to build a monolithic kernel without loadable module support. I've also made it on Linux, but I haven't found such howto for FreeBSD. Is there any opportunity to do this? makeoptions MODULES_OVERRIDE="" this will only prevent kernel modules from being build, so it doesn't directly address your question. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problems with digital camera
On Sat, 2005-01-01 at 15:20, Louis LeBlanc wrote: > On 01/01/05 02:01 PM, Trey Sizemore sat at the `puter and typed: > > On Sat, 2005-01-01 at 13:43 -0500, Louis LeBlanc wrote: > > > > > > > > > No, my reader has to be plugged in at boot, but inserting the card > > > works on the fly. Your device may be different, but mine has always > > > been /dev/da0s1 for the card itself. > > > > > > The /dev partition is pretty manageable in 5.3, so you might try an > > > ls /dev > > > and look for /dev/da0*. It might just jump out at you. I do an ls > > > before inserting the card, and I see da0, but not da0s1. After > > > inserting the card, da0s1 is there. Sometimes it's instantaneous, > > > other times it takes a couple attempts to mount, but it works. > > > > > > Perhaps someone else on the list will know how to get the reader > > > detected on the fly without a reboot, or perhaps the command to check > > > the reader for an inserted card? > > > > > > I had thought camcontrol was it, but it doesn't seem to recognize that > > > the card was removed. > > > > > > Lou > > > > Well, I've removed the entries in /boot/loader.conf (seemed redundant), > > connected the SanDisk with card to the desktop, and rebooted. Here is > > the output of dmesg (I also have a Epson Stylus C84 connected to the USB > > hub and it doesn't appear to be detected either): > > > > > > Copyright (c) 1992-2004 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > > 1994 > > The Regents of the University of California. All rights > > reserved. > > FreeBSD 5.3-RELEASE #0: Fri Nov 5 04:19:18 UTC 2004 > > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2800.12-MHz 686-class CPU) > > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > > > Features=0xbfebf9ff > R,SSE,SSE2,SS,HTT,TM,PBE> > > real memory = 536805376 (511 MB) > > avail memory = 515616768 (491 MB) > > npx0: [FAST] > > npx0: on motherboard > > npx0: INT 16 interface > > acpi0: on motherboard > > acpi0: Power Button (fixed) > > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > > cpu0: on acpi0 > > acpi_button0: on acpi0 > > pcib0: port 0xcf8-0xcff on acpi0 > > pci0: on pcib0 > > agp0: mem 0xe000-0xe3ff at > > device 0.0 on pci0 > > pcib1: at device 1.0 on pci0 > > pci1: on pcib1 > > pci1: at device 0.0 (no driver attached) > > pcm0: port 0xe800-0xe81f irq 11 at device 9.0 on > > pci0 > > pcm0: > > fwohci0: mem 0xd000-0xdfff irq 11 at device > > 10.0 on pci0 > > fwohci0: OHCI version 1.10 (ROM=1) > > fwohci0: No. of Isochronous channels is 4. > > fwohci0: EUI64 00:00:4c:02:00:00:00:90 > > fwohci0: Phy 1394a available S400, 2 ports. > > fwohci0: Link S400, max_rec 2048 bytes. > > firewire0: on fwohci0 > > fwe0: on firewire0 > > if_fwe0: Fake Ethernet address: 02:00:4c:00:00:90 > > fwe0: Ethernet address: 02:00:4c:00:00:90 > > fwe0: if_start running deferred for Giant > > sbp0: on firewire0 > > fwohci0: Initiate bus reset > > fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode > > firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) > > firewire0: bus manager 0 (me) > > uhci0: port 0xdc00-0xdc1f irq 5 at > > device 16.0 on pci0 > > uhci0: [GIANT-LOCKED] > > usb0: on uhci0 > > usb0: USB revision 1.0 > > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub0: 2 ports with 2 removable, self powered > > uhci1: port 0xe000-0xe01f irq 11 at > > device 16.1 on pci0 > > uhci1: [GIANT-LOCKED] > > usb1: on uhci1 > > usb1: USB revision 1.0 > > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub1: 2 ports with 2 removable, self powered > > uhci2: port 0xe400-0xe41f irq 11 at > > device 16.2 on pci0 > > uhci2: [GIANT-LOCKED] > > usb2: on uhci2 > > usb2: USB revision 1.0 > > uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub2: 2 ports with 2 removable, self powered > > pci0: at device 16.3 (no driver attached) > > isab0: at device 17.0 on pci0 > > isa0: on isab0 > > atapci0: port > > 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on p > > ci0 > > ata0: channel #0 on atapci0 > > ata1: channel #1 on atapci0 > > vr0: port 0xd800-0xd8ff mem > > 0xdfffee00-0xdfffeeff irq 5 at device 18
Re: Prism GT Chipset, hostap?
Tabor Kelly wrote: Nikolas Britton wrote: Do the Prism GT chipsets support hostap mode in freebsd (does freebsd even support this chipset?)? and are there any other chipsets besides Prism 2/2.5/3? that work in hostap mode? From wi(4) (http://www.freebsd.org/cgi/man.cgi?query=wi&sektion=4&manpath=FreeBSD+4.10-RELEASE): > Cards based on the Intersil PRISM-II and PRISM-2.5 chips also have a > host-based access point mode which allows the card to act as an access > point (base station). Yes I've read that man page meny times Abocom 802.11b CWB 1000CF Prism2/2.5/3 Abocom 802.11b WUB 1500USB Atmel Abocom 802.11b WMB 2000mini-PCI Abocom 802.11b WP 2000 PCI ADMtek Abocom 802.11b WB1500 PCMCIA Prism2/2.5/3 Abocom 802.11b WB 1500HPCMCIA Prism2/2.5/3 high power Abocom 802.11b WB 1500SPCMCIA Prism2/2.5/3 MMCX ext.antenna connecters Abocom 802.11b WB 1500SH PCMCIA Prism2/2.5/3 High power w/ext.antenna connectors Abocom 802.11b WB 2000 Cardbus ADMtek Abocom 802.11b WB 2500 Cardbus Realtek Abocom 802.11b WMB 2500mini-PCI AboveCable 802.11b ACPC2000PCMCIA Prism2/2.5/3 AboveCable 802.11b ACPC2000USB Prism2/2.5/3 AboveCable 802.11b ACPC2000CF Prism2/2.5/3 Accton 802.11b WN 3101JPCMCIA Prism2/2.5/3 parent company to SMC,ADMTek Accton 802.11b WN 3101-1 mini-PCIAccton now partnered with Arcadyan Accton 802.11b WN 3302APCMCIA Atmel Accton 802.11b WN 3304ACardbus ADMtek Accton 802.11b WN 3306ACardbus Realtek Accton 802.11b WN 3401Bmini-PCI Accton 802.11b WN 3501BUSB Prism2/2.5/3 Accton 802.11b WN 3501CUSB Atmel Accton 802.11b WN 3201DPCI Accton 802.11b WN 3701DCF Acer802.11b 2411PCMCIA Prism2/2.5/3Linux-wlan-ng new version Realtek? Acer802.11b 2413USB Atmel Acer802.11b ? mini-USBPrism2/2.5/3 Linux-wlan-ng Acrowave802.11b AWL-1100UFD USB Tx power 16dBm Acrowave802.11b AWL-1100CF CF Tx power 15 dBm Acrowave802.11b AWL-1100M mini-PCITx power 15 dBm Acrowave802.11b AWL-1100U USB Acrowave802.11b AWL-1100P PCI Prism2/2.5/3 Linux-wlan-ng Acrowave802.11b AWL-1100C PCMCIA Prism2/2.5/3 Linux-wlan-ng Actiontec 802.11b 802PI25 PCI Prism2/2.5/3 Linux-wlan-ng older version Actiontec 802.11b 802CI2 PCMCIA Prism2/2.5/3Linux-wlan-ng older version Actiontec 802.11b 802UI3 USB Prism2/2.5/3Linux-wlan-ng older version Actiontec 802.11b HWCO1150-01 PCMCIA Atmel Actiontec 802.11b HWP01170-01 PCI Prism2/2.5/3 Actiontec 802.11b HWU01170-01 USB Prism2/2.5/3 Linux--wlan-ng recent version Atmel Actiontec 802.11b HWC01170-01 PCMCIA Prism2/2.5/3 Linux--wlan-ng Adaptec 802.11b AWN 8010PCI Tx power 15 dBm Adaptec 802.11b AWN8020 USB Prism2/2.5/3 Linux--wlan-ng Tx power 15 dBm Adaptec 802.11b AWN 8030PCMCIA Prism2/2.5/3 Linux--wlan-ng Tx power 18.5 dBm Addtron 802.11b AWP-100 PCMCIA Prism2/2.5/3 Linux-wlan-ng Addtron 802.11b AWA-100 Cardbus ADMtek Addtron 802.11b AWP-101 PCMCIA Prism2/2.5/3 Linux--wlan-ng with antenna connector Addtron 802.11b AWU-110 USB Addtron 802.11b AWU-120 USB Atmel ADMtek 802.11b ADM8211 mini-PCIADMtek Adtec 802.11b ADLINK 345CFCF Prism2/2.5/3 Adtec 802.11b+ADLINK 2422CCardbus TI AIN Comm802.11b AWU 2000b mini-USBAtmel AirLink Tech802.11b WLG-1100P PCMCIA AirLink Tech802.11b WLG-1100U USB Airvast 802.11b WN-100 PCMCIA Prism2/2.5/3 Airvast 802.11b WN-100S PCMCIA Prism2/2.5/3 wi
Re: Please help: burncd errors
In fact I have converted my mp3 files to wav following a tutorial I found on the net -using mplayer too- I just want to burn them and I thought this was the way (1st create an ISO, 2nd burn the ISO) Anyway I have the same problem: 192# burncd -t -f /dev/acd0 audio *.wav fixate Well... I am going to start by referring you to the best source first: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-cds.html That said, if what you want is to burn a folder of mp3 files to a disk, what you want is mkisofs and burncd with the data command. Something like: mkisofs -J -r -o shiny_new.iso mp3folder burncd -f /dev/acd0c data shiny_new.iso fixate _ Don't just search. Find. Check out the new MSN Search! http://search.msn.com/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Sharing drive data with windows
Is it possible to have NTFS writable? Do I have to use FAT32 to share data with Windows XP? signature.asc Description: This is a digitally signed message part
Re: Compiling FreeBSD 4.10 kernel with gcc native and gcc-3.4.3
KK> Date: Sat, 1 Jan 2005 13:29:38 -0800 KK> From: Kris Kennaway KK> Actually, all the responses I've seen so far have been incorrect, or KK> haven't mentioned the real reason. FreeBSD 4.10 is using gcc 2.95 KK> because later versions of g++ produce incompatible object code, so we Ah. Of this I was unaware; I use gcc, don't track it, have few packages using C++ code, and was none the wiser. KK> cannot update without forcing every 4.x user to recompile every piece KK> of C++ code on their system. That's not acceptable in a -stable KK> branch. Indeed. Eddy -- Everquick Internet - http://www.everquick.net/ A division of Brotsman & Dreger, Inc. - http://www.brotsman.com/ Bandwidth, consulting, e-commerce, hosting, and network building Phone: +1 785 865 5885 Lawrence and [inter]national Phone: +1 316 794 8922 Wichita DO NOT send mail to the following addresses: [EMAIL PROTECTED] -*- [EMAIL PROTECTED] -*- [EMAIL PROTECTED] Sending mail to spambait addresses is a great way to get blocked. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: cannot startx elf-ld.so.1 problem
I had this problem recently. I don't remember exactly, what I did to fix it. I am sorry if this is a completely wrong advice. Try to reinstall gettext package. If you use portupgrade make sure that you force reinstall: portupgrade -fP gettext Let me know if it works. On Sat, 2005-01-01 at 23:15 +0200, [EMAIL PROTECTED] wrote: > Dear fellows! > Happy new year to everybody! > I have FreeBSD 4.10 installed! > I do not know why and for what reason > I got the following error message when trying to startx: > > > > XFree86 Version 4.3.0 > Release Date: 27 February 2003 > X Protocol Version 11, Revision 0, Release 6.6 > Build Operating System: FreeBSD 4.10 i386 [ELF] > Build Date: 29 April 2004 > Before reporting problems, check http://www.XFree86.Org/ > to make sure that you have the latest version. > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Sat Jan 1 21:13:47 2005 > (==) Using config file: "/etc/X11/XF86Config" > /usr/libexec/ld-elf.so.1: /usr/local/lib/libintl.so.6: Undefined symbol > "stpcpy" > > > Is there anything I can do to fix it or should I reinstall FreeBSD? > > Thanks in advance! > D.K. > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" signature.asc Description: This is a digitally signed message part
Re: sharing printers with Mac - Rendezvous?
On Jan 1, 2005, at 12:22 PM, Timothy Luoma wrote: I've been trying to find information on how to setup printer sharing so that I can print from a Mac to a FreeBSD machine on the same LAN. Everything I find seems to revolve around the announcement for Rendezvous, but it's mostly PR and little actual information. The question I can't seem to find an answer to is: What's the easiest way to setup a printer (USB connected to FreeBSD) so I can print from a Mac to it? (the FreeBSD machine has a static IP, if that helps) Any help, including good pointers? I'm familiar with CUPS from Mac OS X so I'm going to try to explore that as a possibility. TjL I would recommend setting up the lpd daemon. This is supported by Mac OS X be default, so there's not a whole lot to setup. No Rendevous necessary. HTH ___ Eric F Crist "I am so smart, S.M.R.T!" Secure Computing Networks -Homer J Simpson PGP.sig Description: This is a digitally signed message part
Re: Sharing drive data with windows
On 01/01/05 23:54, Sergei Gnezdov wrote: Is it possible to have NTFS writable? Do I have to use FAT32 to share data with Windows XP? there is limited support for writing to an ntfs filesystem in freebsd. see mount_ntfs(8) for details. personally i think you're better off using fat32 regards, phil. signature.asc Description: OpenPGP digital signature
Re: courier-imap installation
Cool -- so now I think I may have the daemon running -- ps ax | grep pop reveals: 564 p0 I 0:00.00 /usr/local/sbin/courierlogger pop3d However, I'm unable to connect via a POP3 client... I'm not sure what my /etc/inetd.conf line should look like -- I'm using: pop3stream tcp nowait root:wheel /usr/local/bin/pop3dpop3d - ben On Sat, 01 Jan 2005 15:03:23 -0700, Danny MacMillan <[EMAIL PROTECTED]> wrote: > Did you look in the /usr/local/etc/courier-imap directory? It will > contain a number of *.dist files that you will have to copy and > modify to configure your installation. For example, if you want > to serve imap you will have to rename imapd.dist to imapd and edit > the resulting /usr/local/etc/courier-imap/imapd file so that it is > configured the way you want. The file is heavily commented and the > necessary changes should be trivial. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
READ_DMA interrupt was seen but timeout fired
Greetings list. Today, I found this entry in my daily security mailings: > ad4: WARNING - READ_DMA interrupt was seen but timeout fired LBA=169679214 > ad4: WARNING - READ_DMA interrupt was seen but timeout fired LBA=192145262 > ad4: WARNING - READ_DMA interrupt was seen but timeout fired LBA=207110586 > ad4: WARNING - READ_DMA interrupt was seen but timeout fired LBA=207488666 > ad4: WARNING - READ_DMA interrupt was seen but timeout fired LBA=236563382 > ad4: WARNING - READ_DMA interrupt was seen but timeout fired LBA=221053142 > ad4: WARNING - READ_DMA interrupt was seen but timeout fired LBA=222542714 > ad4: WARNING - READ_DMA interrupt was seen but timeout fired LBA=224089322 Doing a google search mentioned people seeing this with laptops coming back from suspend mode. The machine in question is my desktop running 5.3-STABLE FreeBSD 5.3-STABLE #0 and the hard drive is a 120gig SATA. My kernel is GENERIC + sound. I haven't seen any other issues, no system slowdowns or anything, and thus far I haven't seen anything on my Windows partition either. The drive is just over 1 year old, could it be dying already? Any suggestions would be appreciated. -Derrick ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re[2]: courier-imap installation
Hi artware, Sunday, January 2, 2005, 12:42:38 AM, you typed the following: > Cool -- so now I think I may have the daemon running -- ps ax | grep > pop reveals: > 564 p0 I 0:00.00 /usr/local/sbin/courierlogger pop3d > However, I'm unable to connect via a POP3 client... > I'm not sure what my /etc/inetd.conf line should look like -- I'm using: > pop3stream tcp nowait root:wheel /usr/local/bin/pop3dpop3d > - ben courier-imap's pop3 server runs standalone by default... you should configure /usr/local/etc/courier-imap/authdeamonrc properly and enable pam authentication if you want to auth yourself with system passwords... -- Best Regards, +--==/\/\==--+ (__) FreeBSD | DanGer <[EMAIL PROTECTED]> |\\\'',) The | [EMAIL PROTECTED] ICQ261701668 | \/ \ ^Power | http://danger.homeunix.org | .\._/_)To +--==\/\/==--+ Serve [ "Go cry on someone else's shoulder, I'm off-duty." * Troi ] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: courier-imap installation
On Jan 1, 2005, at 4:03 PM, Danny MacMillan wrote: configured properly when it was prepared as a port. I would just It was installed properly, but quite a few ports require some post- install configuration, especially on the server side. Somebody should have mentioned this by now: http://ezine.daemonnews.org/200308/courier-imap.html I don't fully understand it but found instructions somewhere in the courier-imap package to add this line to /etc/rc.conf: courier_imap_imapd_enable=YES In short I did and it does. Now what I'd like to do is cure these messages flooding /var/log/maillog: Jan 1 17:52:14 Opus imapd: Error: Input/output error Jan 1 17:52:14 Opus imapd: Check for proper operation and configuration Jan 1 17:52:14 Opus imapd: of the File Access Monitor daemon (famd). Saw where fam (thats what its called on FreeBSD) likes/needs inetd running and an entry in /etc/inetd.conf. Everything else runs OK w/o inetd so I'd like to continue to do without. -- David Kelly N4HHE, [EMAIL PROTECTED] Whom computers would destroy, they must first drive mad. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: News from several NNTP Servers
On Jan 1, 2005, at 2:59 AM, Erik Trulsson wrote: There are two different ways of getting news from upstream. The first is to have them send everything to you. This requires some kind of agreement with the upstream-server. The other is to pull articles one by one from the upstream just like a normal nntp-client. Most nntp-servers can be configured to pull data from upstream just as if it was a client which means that you do not need any sort of special agreement with upstream. Where can I go to find upstream newsfeeds? I'm working on setting up a local news server and I want to obtain a few specific blocks of newsgroups for local users. I don't know what they're going to want to access at this point, but I think you get the idea. Thanks. ___ Eric F Crist "I am so smart, S.M.R.T!" Secure Computing Networks -Homer J Simpson PGP.sig Description: This is a digitally signed message part
CUPS with ghostscript-afpl-nox11-8.50,1
I'm trying to install /usr/ports/print/cups on 5.3 with ghostscript-afpl-nox11-8.50,1 $ /usr/ports/print/cups $ make WITH_GHOSTSCRIPT_AFPL=yes install distclean but that doesn't work, it still tries to install ghostscript-gnu ===> Installing for ghostscript-gnu-nox11-7.07_11 ===> ghostscript-gnu-nox11-7.07_11 conflicts with installed package(s): ghostscript-afpl-nox11-8.50,1 They install files into the same place. Please remove them first with pkg_delete(1). I also tried 'make GHOSTSCRIPT_PORT=print/ghostscript-afpl-nox11 install distclean' Anyone know what I'm doing wrong? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
How To Make Vinum Keep Config Across Reboots?
Since an upgrade from 4.9 to 4.10, I've had problems with vinum. The basic problem is that upon reboot, two of my vinum drives show up as "referenced" and thus create the associated chaos. I've tried many things and fiddled around quite a bit so I can't say exactly what I've done. I can include all of the entries in the history file since Oct. 31 if that's a help but it would be a long list. So prior to digging that deep, I will describe where I stand currently and where I want to finish. Currently, I have one vinum volume that I use for /usr. Fortunately this volume is up and running or I would really be in a mess. Here's the 'vinum list' output in this state: blacklamb# vinum vinum -> list 2 drives: D disk1 State: up Device /dev/da0s1h Avail: 0/8383 MB (0%) D disk2 State: up Device /dev/da1s1h Avail: 0/8383 MB (0%) 1 volumes: V usr State: up Plexes: 1 Size: 16 GB 1 plexes: P usr.p0 S State: up Subdisks: 2 Size: 16 GB 2 subdisks: S usr.p0.s0 State: up PO:0 B Size: 8383 MB S usr.p0.s1 State: up PO: 256 kB Size: 8383 MB I want to add another volume and mount it on /ftp. After creating the volume, vinum sees it and it appears OK as indicated in this output: vinum -> list 5 drives: D disk1 State: up Device /dev/da0s1h Avail: 0/8383 MB (0%) D disk2 State: up Device /dev/da1s1h Avail: 0/8383 MB (0%) D ftp1 State: up Device /dev/ad0s1h Avail: 0/76319 MB (0%) D ftp2 State: up Device /dev/ad1s1h Avail: 0/76319 MB (0%) D ftp3 State: up Device /dev/da3s1h Avail: 0/114473 MB (0%) 2 volumes: V usr State: up Plexes: 1 Size: 16 GB V ftp State: up Plexes: 1 Size:260 GB 2 plexes: P usr.p0 S State: up Subdisks: 2 Size: 16 GB P ftp.p0 C State: up Subdisks: 3 Size:260 GB 5 subdisks: S usr.p0.s0 State: up PO:0 B Size: 8383 MB S usr.p0.s1 State: up PO: 256 kB Size: 8383 MB S ftp.p0.s0 State: up PO:0 B Size: 74 GB S ftp.p0.s1 State: up PO: 74 GB Size: 74 GB S ftp.p0.s2 State: up PO: 149 GB Size:111 GB Next I 'quit' the vinum command line and fsck my newly created volume. It finishes successfully and I mount it: blacklamb# df Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/da0s1a 30235010208817607437%/ /dev/vinum/usr 16639674 5433762 987473935%/usr procfs 4 4 0 100%/proc /dev/vinum/ftp 265119539 119729707 13213385648%/ftp I recheck with the 'vinum list' command and the output is the same as above. Now I cross my fingers and reboot to see if the volume comes up properly on startup. However ftp3 (/dev/da3s1h) comes up 'referenced' and causes problems. Mounting root from ufs:/dev/da0s1a dumpon: crash dumps to /dev/da1s1b (13, 131081) vinum: loaded vinum: reading configuration from /dev/ad1s1h vinum: ftp.p0.s2 is crashed vinum: ftp.p0 is corrupt vinum: updating configuration from /dev/ad0s1h vinum: updating configuration from /dev/da1s1h vinum: updating configuration from /dev/da0s1h vinum: /dev is mounted read-only, not rebuilding /dev/vinum Warning: defective objects D ftp3 State: referenced Device Avail: 0/0 MB P ftp.p0 C State: corrupt Subdisks: 3 Size:260 GB S ftp.p0.s2 State: crashed PO: 149 GB Size:111 GB swapon: adding /dev/da1s1b as swap device Automatic boot in progress... /dev/da0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da0s1a: clean, 100130 free (938 frags, 12399 blocks, 0.6% fragmentation) /dev/vinum/ftp: CANNOT READ: BLK 546979872 /dev/vinum/ftp: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. /dev/vinum/ftp: CANNOT WRITE: BLK 2800 /dev/vinum/ftp: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. /dev/vinum/usr: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/vinum/usr: clean, 11205903 free (152463 frags, 1381680 blocks, 0.9% fragmentation) THE FOLLOWING FILE SYSTEM HAD AN UNEXPECTED INCONSISTENCY: /dev/vinum/ftp (/ftp) File system preen failed, trying fsck -y . . . ** /dev/da0s1a ** Last Mounted on / ** Root file system ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 2053 files, 51045 used, 100130 free (938 frags, 12399 blocks, 0.6% fragmentation) ** /dev/vinum/usr ** Last Mounted on /usr ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Che
gdbm to text
Is there a utility that will read all records from a gdbm database and dump em to an editable file (text format)? -- Best regards, Chris ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: News from several NNTP Servers
search google for keywork "open nntp server list" Ted > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Eric F Crist > Sent: Saturday, January 01, 2005 4:19 PM > To: Erik Trulsson > Cc: Sergei Gnezdov; FreeBSD-Questions > Subject: Re: News from several NNTP Servers > > > On Jan 1, 2005, at 2:59 AM, Erik Trulsson wrote: > > > > There are two different ways of getting news from upstream. The first > > is to have them send everything to you. This requires some kind of > > agreement with the upstream-server. > > The other is to pull articles one by one from the upstream just like a > > normal nntp-client. > > Most nntp-servers can be configured to pull data from upstream just as > > if it was a client which means that you do not need any sort of special > > agreement with upstream. > > Where can I go to find upstream newsfeeds? I'm working on setting up a > local news server and I want to obtain a few specific blocks of > newsgroups for local users. I don't know what they're going to want to > access at this point, but I think you get the idea. > > Thanks. > ___ > Eric F Crist "I am so smart, S.M.R.T!" > Secure Computing Networks -Homer J Simpson > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
No MAKEDEV in /dev
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/ppp- troubleshoot.html tells me to use this command from /dev/: sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 but there is no MAKEDEV in /dev/ In fact, these are the only references to MAKEDEV on the entire machine: $ locate MAKEDEV /usr/ports/emulators/svr4_base/files/SVR4_MAKEDEV /usr/ports/net/rboot/files/patch-dev::MAKEDEV /usr/share/man/man8/MAKEDEV.8.gz /usr/src/share/man/man8/MAKEDEV.8 This seems fairly odd to me. How I can acquire MAKEDEV for this system (FreeBSD 5.3/Intel)? Thanks! TjL ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: No MAKEDEV in /dev
Timothy Luoma wrote: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/ppp- troubleshoot.html tells me to use this command from /dev/: sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 but there is no MAKEDEV in /dev/ Usually there are two entries for this in the documentation, one for 4.X and another for 5.X systems. On 5.3, see 'man MAKEDEV' and 'man devfs', and find out that MAKEDEV is deprecated by devfs. Rob. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: triple monitor hardware setup on FBSD - suggestions needed...
> I am currently running a triple-monitor setup under > winXP, with an extended desktop that stretches across > all three monitors. I like it. > > I would, however, like to use FreeBSD. Good choice :) > So, first off, what hardware (video card) comes to > mind for doing triple screens with FreeBSD ? A matrox > P750 comes to mind, but when you run it with three > screens, they downgrade to 1280x1024, which is bad. I > am happy to consider multiple video cards to > accomplish this ... at the very least I need 1600x1200 > out of each card, preferably 1920x1200 ... Well, as far as hardware goes for my tri-monitor, I usually have a Radeon 7500 and an geforce2 mx400 (or some other cruddy pci card) though I'm using a matrox G450 for the primary right now. Really, any combination of supported video cards will work about equally well. > Second, what is the support for something like this in > XFree86, or x.org ? What I am really looking for is > the ability to create virtually sized screens - so > instead of having three total (physical) screens that > I can maximize windows inside of, I want to split each > physical screen in half for a total of 6 virtual > screens - so there are six total areas within which I > can maximize a window in ... this is something I am > really trying to accomplish. I'd like to say that this is a trivial thing to do, but I kind of doubt that it is. I know of no easy way to do this because X as it is now, assigns a "head" to a screen (where by head I mean a video card output) and in doing so, makes the "head" atomic in a sense. What it sounds like you'd like to do is create something smaller than this and assign it to a screen. It might be substantially easier to just purchase more monitors or learn to use virtual desktops. Good luck finding something that suits you :) -- If I write a signature, my emails will appear more personalised. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: No MAKEDEV in /dev
On Jan 1, 2005, at 11:46 PM, Rob wrote: Timothy Luoma wrote: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/ppp- troubleshoot.html tells me to use this command from /dev/: sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 but there is no MAKEDEV in /dev/ Usually there are two entries for this in the documentation, one for 4.X and another for 5.X systems. On 5.3, see 'man MAKEDEV' and 'man devfs', and find out that MAKEDEV is deprecated by devfs. Ah, I guess this is a place where the documentation hasn't yet been updated. I didn't think to check the manpage until just after I sent my message. FWIW, as a layman/FreeBSD newbie, I'd make a suggestion that the manpage for MAKEDEV make it a bit more clear that having 'devfs' means that MAKEDEV commands are no longer necessary because devfs will take care of it automatically. I found myself trying to read 'man devfs' to figure out a way to manually make cuaa0. TjL ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: sharing printers with Mac - Rendezvous?
On Jan 1, 2005, at 6:25 PM, Eric F Crist wrote: I would recommend setting up the lpd daemon. This is supported by Mac OS X be default, so there's not a whole lot to setup. No Rendevous necessary. Thanks Eric. I'll try that. I was thinking Rendezvous would be easier than setting up lpd, but I might be wrong. I'm not even sure that my printers (Brother 1240 and HP Deskjet something) support Rendezvous or how it works. TjL ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
FreeBSD 5.3 - Write failure on transfer
Hi, I am a newbie to this list and I hope I am posting to the correct list - apologies if I am off target. I am installing FreeBSD 5.3 on a hp netserver LC2000r. The box is a dual processor P3 with three scsi2 drives running in a raid1 configuration with one hot spare. We have six of these boxes. Three of them are running FreeBSD 4.8 or 4.9 without a hitch. I decided to install 5.3 from CD on a fourth box and I am having a problem. I go through the install process. When it goes to write the file structure to the drives it does this in a around 1 second - this seems very fast. Then it starts copying from the CD and I quickly get the following error: "Write failure on transfer! (wrote -1 bytes of 1425408 bytes)" I click ok and the next error message is: "unable to transfer the base distribution from acd0, do you want to try to retrieve it again?". So this has started me troubleshooting the possible causes of the problem: 1) First stop was to suspect the freebsd iso I had burnt was suspect. So I re burnt the cd and the problem persisted. I then suspected the ISO I had downloaded was corrupted. So I downloaded it again, burnt the cd but the problem still persisted. 2) I then suspected the second copy could have come from a cache and therefore may have the same problem as the first copy - so I checked the md5 signature but it lines up with the original from freebsd.org 3) I suspected the CD Rom drive - so I swapped it with one of our other Netserver boxes - problem still persisted. 4)I suspected a drive formatting problem - so I went back into the SCSI software, redid the raid drives and reformatted them - problem still persisted. 5) I suspected another hardware problem - so I pulled out FreeBSD 4.9 to see if that would install - and it did install without any errors. That sort of discounts there being any hardware problems. It points to something specific to freebsd 5.3. So this is where I have got to - FreeBSD 4.9 will install without errors but 5.3 will not install. I suspect the problem has to do with the initial setting up of the file structure - 5.3 is doing this in about one second whereas 4.9 takes closer to a minute to do this. Any thoughts or suggestion? Lino Webzone ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD 5.3 - Write failure on transfer
On Sun, Jan 02, 2005 at 03:53:33PM +1030, Lino Fusco wrote: > Hi, > > I am a newbie to this list and I hope I am posting to the correct list - > apologies if I am off target. > > I am installing FreeBSD 5.3 on a hp netserver LC2000r. The box is a > dual processor P3 with three scsi2 drives running in a raid1 > configuration with one hot spare. > > We have six of these boxes. Three of them are running FreeBSD 4.8 or 4.9 > without a hitch. > > I decided to install 5.3 from CD on a fourth box and I am having a problem. > > I go through the install process. When it goes to write the file > structure to the drives it does this in a around 1 second - this seems > very fast. Then it starts copying from the CD and I quickly get the > following error: > > "Write failure on transfer! (wrote -1 bytes of 1425408 bytes)" > > I click ok and the next error message is: > > "unable to transfer the base distribution from acd0, do you want to try > to retrieve it again?". > > So this has started me troubleshooting the possible causes of the problem: > > 1) First stop was to suspect the freebsd iso I had burnt was suspect. So > I re burnt the cd and the problem persisted. I then suspected the ISO I > had downloaded was corrupted. So I downloaded it again, burnt the cd but > the problem still persisted. > > 2) I then suspected the second copy could have come from a cache and > therefore may have the same problem as the first copy - so I checked the > md5 signature but it lines up with the original from freebsd.org > > 3) I suspected the CD Rom drive - so I swapped it with one of our other > Netserver boxes - problem still persisted. > > 4)I suspected a drive formatting problem - so I went back into the SCSI > software, redid the raid drives and reformatted them - problem still > persisted. > > 5) I suspected another hardware problem - so I pulled out FreeBSD 4.9 to > see if that would install - and it did install without any errors. That > sort of discounts there being any hardware problems. It points to > something specific to freebsd 5.3. > > So this is where I have got to - FreeBSD 4.9 will install without errors > but 5.3 will not install. > > I suspect the problem has to do with the initial setting up of the file > structure - 5.3 is doing this in about one second whereas 4.9 takes > closer to a minute to do this. > > Any thoughts or suggestion? I believe FreeBSD 5.3 does support using UFS 1 in the install, just check the option in the disklabel program, but if the partitioning also fails then that may not be the problem. > > Lino > Webzone > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- I sense much NT in you. NT leads to Bluescreen. Bluescreen leads to downtime. Downtime leads to suffering. NT is the path to the darkside. Powerful Unix is. Public Key: ftp://ftp.tallye.com/pub/lorenl_pubkey.asc Fingerprint: B3B9 D669 69C9 09EC 1BCD 835A FAF3 7A46 E4A3 280C ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: gdm2
On Fri, 31 Dec 2004 21:07:12 +0100
"dusan >>" <[EMAIL PROTECTED]> wrote:
If your goal is to start Gnome,it's perhaps faster to edit /etc/ttys.
Change on line 8 in /etc/ttys "off" in "on" and "xdm" in "gdm".
> hi there. I have a little problem using gdm2 on 5.3, I am using actual
> version in ports of gdm2 ad I can't add new session type to it. I have
> added file user.desktop to /usr/X11R6/etc/dm/Sessions with this content
> but without a result:
>
> [Desktop Entry]
> Encoding=UTF-8
> Name=User
> Comment=This session executes your ~/.xinitc file
> Exec=~/.xinitrc
> TryExec=~/.xinitrc
> Icon=
> Type=Application
>
>
>
> --
> -- . dusan . . jabber: [EMAIL PROTECTED]
> -- icq : 322853999
> -- msn : [EMAIL PROTECTED]
> --
> -- | ____ _.--.
> -- | \`.|\.....-'` `-._.-'_.-'`
> -- | / ' ` , __.--'
> -- | )/' _/ \ `-_, /
> -- | `-'" `"\_ ,_.-;_.-\_ ',
> -- | _.-'_./ {_.' ; /
> -- {_.-``-' {_/
> ___
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "[EMAIL PROTECTED]"
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
buildworld fails with sendmail
BARTON# cd /usr/src/etc && make -DNOPROFILE ===> sendmail make: don't know how to make freebsd.cf. Stop *** Error code 2 Stop in /usr/src/etc. I searched the archives and found where make -n freebsd.cf or make obj, make all would fix it. No good here. I also deleted usr/src/etc and did it again. Any suggestions? $ uname -a FreeBSD BARTON 5.3-STABLE FreeBSD 5.3-STABLE #2: Sun Nov 21 23:50:50 EST 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/NINAMORI i386 $ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
new Ruby 1.8.2 makes portupgrade core-dump on FreeBSD 4.10 - anyone else?
The new Ruby version 1.8.2 now makes portupgrade core-dump Ruby on FreeBSD 4.10 for me. Has anyone else seen this? Sorry I don't even know how to do a proper bug-report for this. I'm just a lowly user. :-) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: No MAKEDEV in /dev
On Sun, Jan 02, 2005 at 12:09:55AM -0500, Timothy Luoma wrote: > FWIW, as a layman/FreeBSD newbie, I'd make a suggestion that the > manpage for MAKEDEV make it a bit more clear that having 'devfs' means > that MAKEDEV commands are no longer necessary because devfs will take > care of it automatically. Please submit a PR (send-pr) with your suggestion, preferably with a patch to the manpage source, or at least with your proposed rewording. Thanks! Kris pgpD1CJmfe8u0.pgp Description: PGP signature
Re: new Ruby 1.8.2 makes portupgrade core-dump on FreeBSD 4.10 - anyone else?
On Sat, Jan 01, 2005 at 10:09:51PM -0800, Miles Keaton wrote: > The new Ruby version 1.8.2 now makes portupgrade core-dump Ruby on > FreeBSD 4.10 for me. > > Has anyone else seen this? > > Sorry I don't even know how to do a proper bug-report for this. I'm > just a lowly user. :-) /usr/ports/UPDATING Kris pgpWM1PKWm0FQ.pgp Description: PGP signature
Re: buildworld fails with sendmail
On Sun, Jan 02, 2005 at 06:12:29AM +, jason henson wrote: > BARTON# cd /usr/src/etc && make -DNOPROFILE > ===> sendmail > make: don't know how to make freebsd.cf. Stop > *** Error code 2 > > Stop in /usr/src/etc. > > I searched the archives and found where make -n freebsd.cf or make > obj, make all would fix it. No good here. I also deleted usr/src/etc > and did it again. Any suggestions? Don't do that :-) Running 'make' in random parts of the source tree isn't supported, that's what 'buildworld' is for. Kris pgpFCaCrTmt0X.pgp Description: PGP signature
Re: FreeBSD 5.3 - Write failure on transfer
Loren M. Lang wrote: On Sun, Jan 02, 2005 at 03:53:33PM +1030, Lino Fusco wrote: Hi, I am a newbie to this list and I hope I am posting to the correct list - apologies if I am off target. I am installing FreeBSD 5.3 on a hp netserver LC2000r. The box is a dual processor P3 with three scsi2 drives running in a raid1 configuration with one hot spare. We have six of these boxes. Three of them are running FreeBSD 4.8 or 4.9 without a hitch. I decided to install 5.3 from CD on a fourth box and I am having a problem. I go through the install process. When it goes to write the file structure to the drives it does this in a around 1 second - this seems very fast. Then it starts copying from the CD and I quickly get the following error: "Write failure on transfer! (wrote -1 bytes of 1425408 bytes)" I click ok and the next error message is: "unable to transfer the base distribution from acd0, do you want to try to retrieve it again?". So this has started me troubleshooting the possible causes of the problem: 1) First stop was to suspect the freebsd iso I had burnt was suspect. So I re burnt the cd and the problem persisted. I then suspected the ISO I had downloaded was corrupted. So I downloaded it again, burnt the cd but the problem still persisted. 2) I then suspected the second copy could have come from a cache and therefore may have the same problem as the first copy - so I checked the md5 signature but it lines up with the original from freebsd.org 3) I suspected the CD Rom drive - so I swapped it with one of our other Netserver boxes - problem still persisted. 4)I suspected a drive formatting problem - so I went back into the SCSI software, redid the raid drives and reformatted them - problem still persisted. 5) I suspected another hardware problem - so I pulled out FreeBSD 4.9 to see if that would install - and it did install without any errors. That sort of discounts there being any hardware problems. It points to something specific to freebsd 5.3. So this is where I have got to - FreeBSD 4.9 will install without errors but 5.3 will not install. I suspect the problem has to do with the initial setting up of the file structure - 5.3 is doing this in about one second whereas 4.9 takes closer to a minute to do this. Any thoughts or suggestion? I believe FreeBSD 5.3 does support using UFS 1 in the install, just check the option in the disklabel program, but if the partitioning also fails then that may not be the problem. Lino Webzone ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" Hi, Tried setting the partitions to UFS1 - FreeBSD 5.3 then takes closer to a minute to setup the partitions just like 4.9 - but still get the same error message when it goes to copy the files. Thanks but did not work. Lino ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: buildworld fails with sendmail
On 01/02/05 01:17:58, Kris Kennaway wrote: On Sun, Jan 02, 2005 at 06:12:29AM +, jason henson wrote: > BARTON# cd /usr/src/etc && make -DNOPROFILE > ===> sendmail > make: don't know how to make freebsd.cf. Stop > *** Error code 2 > > Stop in /usr/src/etc. > > I searched the archives and found where make -n freebsd.cf or make > obj, make all would fix it. No good here. I also deleted usr/src/etc > and did it again. Any suggestions? Don't do that :-) Running 'make' in random parts of the source tree isn't supported, that's what 'buildworld' is for. Kris I know and I wouldn't do it at random. I just have been trouble shooting and wanted to get the error msg easily without waiting on buildworld. I have done everything by the book, as for the steps go. So still no suggestions? I read on an archive where you had a smilliar/same problem Kris, do you remember it? Also are you an android or something, I see you responding to emails 24/7 within minutes. You are like a paid support team! Do you ever sleep? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: buildworld fails with sendmail
On 01/02/05 01:31:26, jason henson wrote: On 01/02/05 01:17:58, Kris Kennaway wrote: On Sun, Jan 02, 2005 at 06:12:29AM +, jason henson wrote: > BARTON# cd /usr/src/etc && make -DNOPROFILE > ===> sendmail > make: don't know how to make freebsd.cf. Stop > *** Error code 2 > > Stop in /usr/src/etc. > > I searched the archives and found where make -n freebsd.cf or make > obj, make all would fix it. No good here. I also deleted usr/src/etc > and did it again. Any suggestions? Don't do that :-) Running 'make' in random parts of the source tree isn't supported, that's what 'buildworld' is for. Kris I know and I wouldn't do it at random. I just have been trouble shooting and wanted to get the error msg easily without waiting on buildworld. I have done everything by the book, as for the steps go. So still no suggestions? I read on an archive where you had a smilliar/same problem Kris, do you remember it? Also are you an android or something, I see you responding to emails 24/7 within minutes. You are like a paid support team! Do you ever sleep? I think I got it! Some more searching revealed a comman problem with the standard refuse file having src/etc/sendmail/freebsd.mc* in it. Hopifully this will solve the problem. Thanks for the help, Keep up the good work. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
build emacs - Xaw3d.8 problem
Friends While doing a compile of Emacs-21.3, the build process ended with the following error: ===> emacs-21.3_3 depends on executable: gmake - found ===> emacs-21.3_3 depends on file: /usr/local/bin/autoconf213 - found ===> emacs-21.3_3 depends on shared library: Xaw3d.8 - not found ===>Verifying install for Xaw3d.8 in /usr/ports/x11-toolkits/Xaw3d ===> Returning to build of emacs-21.3_3 Error: shared library "Xaw3d.8" does not exist *** Error code 1 This has also happened to me while trying to compile Xfig & Plugger-Plugins-Hubbe. The Zaw3d libraries are installed and a file shows a number of references to *xaw3d* but not to "Xaw3d.8" For example: /usr/ports/distfiles/Xaw3d-1.5.tar.gz /usr/X11R6/include/X11/Xaw3d /usr/X11R6/lib/libXaw3d.so /usr/X11R6/lib/libXaw3d.so.7 /usr/X11R6/lib/libXaw3d.a /usr/X11R6/share/doc/Xaw3d /var/db/pkg/Xaw3d-1.5 I can't find any references to this problem in the archives or the web. Does anyone have any ideas? If I installed Xfig & Emacs as a package over FTP, would that process interfere with my existing libraries? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
