Re: [gentoo-user] list exact files in pkg before emerge
On Sat, 2005-03-26 at 14:51 -0600, Harry Putnam wrote: I'm probably missing this in qpkg or emerge man pages, but I'd like to know how to discover the exact files that would be installed before actually doing. emerge -v -p pkg doesn't do that in the detail I'd like to see. There is no useful way of knowing every file that will be installed by package XX, because that varies depending on USE flags. -- gentoo-user@gentoo.org mailing list -- Nick Rout [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] 2005.0 available?
On Fri, 25 Mar 2005 19:22:53 +, Neil Bothwick [EMAIL PROTECTED] wrote: Occasionally, but you'll get a warning that you need to do this when you sync. I think the last time this happened on x86 was when the 1.4 profile was deprecated last year. Even after syncing, I still don't get any make.defaults, so eix is now broken: # eix -u Updating eix database in /var/cache/eix Using portage cache: /usr/portage/metadata/cache/ varsreader.cc:309 Can't open file /etc/../usr/portage/profiles/default-linux/x86/2005.0/make.defaults No such file or directory -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Problem With Tulip Module
Jerry McBride wrote: On Saturday 26 March 2005 09:25 pm, Kathy Wills wrote: I've tried everything I can find by googling. Tried the forums. Can't find anything that solves the issue. I have noapic as a kernel parameter in grub. I still get this error in dmesg: tulip0: MII transceiver #1 config 1000 status 786d advertising 01e1. eth0: ADMtek Comet rev 17 at d12c8000, 00:03:6D:1D:89:41, IRQ 9. ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) :02:0d.0: tulip_stop_rxtx() failed eth0: Setting half-duplex based on MII#1 link partner capability of 0021. Here is the relevant result of lspci-vv: :02:0d.0 Ethernet controller: Linksys NC100 Network Everywhere Fast Ethernet 10/100 (rev 11) Subsystem: Linksys: Unknown device 0570 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 32 (63750ns min, 63750ns max), cache line size 08 Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at d000 Region 1: Memory at ed80 (32-bit, non-prefetchable) [size=1K] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Here is the result of mii-diag: Using the default interface 'eth0'. Basic registers of MII PHY #1: 1000 786d 0022 5410 01e1 0021 0004 2001. Basic mode control register 0x1000: Auto-negotiation enabled. You have link beat, and everything is working OK. Your link partner is generating 10baseT link beat (no autonegotiation). End of basic transceiver information. Does anyone have anymore ideas on what to try to get rid of the tulip_stop_rxtx() failed problem? The patches I found by googling this error didn't work. What kernel version are you running? Tulip reports version 1.1.13 with this kernel, 2.6.11. I've run my linksys cards with most 2.2.x and all 2.4.x an 2.6.x version kernels and never saw your reported error message. The config file in 2.6.11 has a couple of configure options that may be of help to you. Cheers Kernel version is 2.6.11-r4. I'm using the tulip module that I have always used. From kernel .config: # Tulip family network device support # CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_TULIP=m CONFIG_TULIP_MWI=y CONFIG_TULIP_MMIO=y CONFIG_TULIP_NAPI=y CONFIG_TULIP_NAPI_HW_MITIGATION=y CONFIG_DE4X5=m CONFIG_WINBOND_840=m CONFIG_DM9102=m -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] 2005.0 available?
On Sun, 2005-03-27 at 09:17 +, Julien Cayzac wrote: On Fri, 25 Mar 2005 19:22:53 +, Neil Bothwick [EMAIL PROTECTED] wrote: Occasionally, but you'll get a warning that you need to do this when you sync. I think the last time this happened on x86 was when the 1.4 profile was deprecated last year. Even after syncing, I still don't get any make.defaults, so eix is now broken: # eix -u Updating eix database in /var/cache/eix Using portage cache: /usr/portage/metadata/cache/ varsreader.cc:309 Can't open file /etc/../usr/portage/profiles/default-linux/x86/2005.0/make.defaults No such file or directory what does ls -l /etc/make.profile say? try rm /etc/make.profile ln -s /etc/make.profile /usr/portage/profiles/default-linux/x86/2005.0 -- gentoo-user@gentoo.org mailing list -- Nick Rout [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] No-ip.com Client
On Sun, Mar 27, 2005 at 10:44:55AM +0530, Mrugesh Karnik wrote: I am using no-ip.com's redirection services to run my webserver on Gentoo.. I downloaded their client and installed it. Now I wanted it to load at startup. I looked at the readme and here are the instructions... The no-ip updater is available in portage: net-dns/noip-updater and you can install it with emerge. If you do that, a script will be installed in /etc/init.d (/etc/init.d/noip). Use the command # rc-update add noip-updater default to start the service at boot time. The first time it is run, it asks for the configuration data. I think you should take a look at this package, instead of installing without the help of emerge. Romildo -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: emerge/make failure i386 vs i686
Neil Bothwick [EMAIL PROTECTED] writes: The answer is in the original error message, 3.3.4 grep: /usr/lib/gcc-lib/i386-pc-linux-gnu/3.3.4/libstdc++.la: No such file or directory Sounds pretty dumb but I didn't see anything like a `history' item for qpkg or emerge. emerge genlop genlop gcc I must be missing something basic here. The version shown in that output is the same version that is currently installed. Running genlop gcc produces: * sys-devel/gcc Wed Oct 27 17:25:47 2004 sys-devel/gcc-3.3.4-r1 Wed Oct 27 17:34:25 2004 sys-devel/gcc-3.3.4-r1 So does it mean the same version was installed twice? Running ` fix_libtool_files.sh 3.3.4' Doesn't seem to accomplish much either: root # fix_libtool_files.sh 3.3.4 * Scanning libtool files for hardcoded gcc library paths... -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] list exact files in pkg before emerge
Harry Putnam wrote: I'm probably missing this in qpkg or emerge man pages, but I'd like to know how to discover the exact files that would be installed before actually doing. emerge -v -p pkg doesn't do that in the detail I'd like to see. -- gentoo-user@gentoo.org mailing list take a look at http://www.gentoo-stats.org/ maybe there is something similar -- No problem is so formidable that you can't walk away from it. ~ Charles M. Schulz But sometimes run fast is better ~ Francesco R. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] 2005.0 available?
On Sun, 2005-03-27 at 11:33 +, Peter Ruskin wrote: On Sunday 27 March 2005 11:11, Nick Rout wrote: On Sun, 2005-03-27 at 09:17 +, Julien Cayzac wrote: On Fri, 25 Mar 2005 19:22:53 +, Neil Bothwick [EMAIL PROTECTED] wrote: Occasionally, but you'll get a warning that you need to do this when you sync. I think the last time this happened on x86 was when the 1.4 profile was deprecated last year. Even after syncing, I still don't get any make.defaults, so eix is now broken: # eix -u Updating eix database in /var/cache/eix Using portage cache: /usr/portage/metadata/cache/ varsreader.cc:309 Can't open file /etc/../usr/portage/profiles/default-linux/x86/2005.0/make.defa ults No such file or directory what does ls -l /etc/make.profile say? try rm /etc/make.profile ln -s /etc/make.profile /usr/portage/profiles/default-linux/x86/2005.0 That's bad advice Nick ;-) First: ln -s source link means you probably meant ln -s /usr/portage/profiles/default-linux/x86/2005.0 /etc/make.profile woops yes I got my parameters round the wrong way there, sorry about that! Second: That won't work for Neil anyway, because there is no /usr/portage/profiles/default-linux/x86/2005.0/make.defaults err I never suggested that he switch to the 2005.0 profile in the first place, someone else did. I was just trying to make sure he had his link right (which, as you pointed out above) I did wrong! However on this second point I think you may be wrong. /usr/portage/profiles/default-linux/x86/2005.0/parent contains .. and as I understand it this points to the directory above (i.e /usr/portage/profiles/default-linux/x86/ which contains a make.defaults. Although so does /usr/portage/profiles/default-linux/x86/2004.3/parent, yet /usr/portage/profiles/default-linux/x86/2004.3/ contains a make.defaults, so now I am confused! -- Nick Rout [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: emerge/make failure i386 vs i686
Harry Putnam [EMAIL PROTECTED] writes: The answer is in the original error message, 3.3.4 grep: /usr/lib/gcc-lib/i386-pc-linux-gnu/3.3.4/libstdc++.la: No such file or directory Sounds pretty dumb but I didn't see anything like a `history' item for qpkg or emerge. emerge genlop genlop gcc I must be missing something basic here. The version shown in that output is the same version that is currently installed. Running genlop gcc produces: * sys-devel/gcc Wed Oct 27 17:25:47 2004 sys-devel/gcc-3.3.4-r1 Wed Oct 27 17:34:25 2004 sys-devel/gcc-3.3.4-r1 So does it mean the same version was installed twice? Running ` fix_libtool_files.sh 3.3.4' Doesn't seem to accomplish much either: root # fix_libtool_files.sh 3.3.4 * Scanning libtool files for hardcoded gcc library paths... Ok, I tried running the command suggested in fix_libtool_files.sh `fix_libtool_files.sh `gcc -dumpversion` --oldarch i386-pc-linux-gnu Setting i386 as old target. And did see some `fixing' output on kde libs: * FIXING: /usr/lib/libaspell.la ... [c] * FIXING: /usr/lib/libpspell.la ... [c] So trying again with `emerge -v -k kdelibs' But I noticed that the portage tree does not contain my version of gcc gcc-3.3.4-r1 it jumps from 3.3.2 to 3.3.5 Is that significant? -- gentoo-user@gentoo.org mailing list
[gentoo-user] Is there an xfce4 user in the house?
I'm trying to run xfce4 genlop xfce4 reports only: * xfce-base/xfce4 But I did emerge xfce4-session with no errors .. not sure why it doesn't show up. On startup, I see a lightblue backgroud with the icon mouse blinking for a few seconds .. maybe 15-20 and then the screen goes a sort of tweed (grey and white speckles) and cursor becomes an X. Any apps started appear with the title bar just out of site above the top of screen so they cannot be moved/resized etc. They don't appear in the taskbar pager. I have no .xfce4 in ~/ .. .. Should it have been copied there? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Is there an xfce4 user in the house?
On Sun, 2005-03-27 at 06:31 -0600, Harry Putnam wrote: I'm trying to run xfce4 genlop xfce4 reports only: * xfce-base/xfce4 But I did emerge xfce4-session with no errors .. not sure why it doesn't show up. because genlop xfce4 searches only for the package named xfce4, not xfce4-session or any name just containing xfce4. You might try genlop -l |grep xfce4 On startup, I see a lightblue backgroud with the icon mouse blinking for a few seconds .. maybe 15-20 and then the screen goes a sort of tweed (grey and white speckles) and cursor becomes an X. Any apps started appear with the title bar just out of site above the top of screen so they cannot be moved/resized etc. They don't appear in the taskbar pager. As a general X tip, hold down the Alt key and click-drag anywhere in the window - that way you do not need to be able to reach the title bar. Have you emerge xfce4-panel and does it appear? I have no .xfce4 in ~/ .. .. Should it have been copied there? I have one, I am not sure where it came from. -- gentoo-user@gentoo.org mailing list -- Nick Rout [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Is there an xfce4 user in the house?
On Sun, 2005-03-27 at 06:31 -0600, Harry Putnam wrote: I'm trying to run xfce4 genlop xfce4 reports only: * xfce-base/xfce4 But I did emerge xfce4-session with no errors .. not sure why it doesn't show up. On startup, I see a lightblue backgroud with the icon mouse blinking for a few seconds .. maybe 15-20 and then the screen goes a sort of tweed (grey and white speckles) and cursor becomes an X. Any apps started appear with the title bar just out of site above the top of screen so they cannot be moved/resized etc. They don't appear in the taskbar pager. I have no .xfce4 in ~/ .. .. Should it have been copied there? FWIW, heres a list of my installed xfce4 stuff: [EMAIL PROTECTED] nick $ qpkg -I|grep xfce4 xfce-base/libxfce4mcs * xfce-base/libxfce4util * xfce-base/xfce4 * xfce-base/xfce4-extras * xfce-base/xfce4-panel * xfce-base/xfce4-session * xfce-extra/xfce4-appfinder * xfce-extra/xfce4-artwork * xfce-extra/xfce4-battery * xfce-extra/xfce4-clipman * xfce-extra/xfce4-cpugraph * xfce-extra/xfce4-icon-theme * xfce-extra/xfce4-iconbox * xfce-extra/xfce4-minicmd * xfce-extra/xfce4-mixer * xfce-extra/xfce4-netload * xfce-extra/xfce4-notes * xfce-extra/xfce4-showdesktop * xfce-extra/xfce4-systemload * xfce-extra/xfce4-systray * xfce-extra/xfce4-taskbar * xfce-extra/xfce4-themes * xfce-extra/xfce4-toys * xfce-extra/xfce4-trigger-launcher * xfce-extra/xfce4-windowlist * -- gentoo-user@gentoo.org mailing list -- Nick Rout [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: emerge/make failure i386 vs i686
On Sunday 27 March 2005 14:13, Harry Putnam wrote: Running genlop gcc produces: * sys-devel/gcc Wed Oct 27 17:25:47 2004 sys-devel/gcc-3.3.4-r1 Wed Oct 27 17:34:25 2004 sys-devel/gcc-3.3.4-r1 So does it mean the same version was installed twice? Yes, but doesn't mean necessarily that two gcc with different versions are residing on your pc. (I don't think you are cross-compiling, you would be aware of it!) Ten minutes between two gcc install may mean that the second install was issued from a precompiled package. (In my box gcc-3.3.4 took about half an hour to compile; ok there wasn't so plenty of RAM as in signature then, but the rest is the same) Ok, I tried running the command suggested in fix_libtool_files.sh `fix_libtool_files.sh `gcc -dumpversion` --oldarch i386-pc-linux-gnu Setting i386 as old target. And did see some `fixing' output on kde libs: * FIXING: /usr/lib/libaspell.la ... [c] * FIXING: /usr/lib/libpspell.la ... [c] So trying again with `emerge -v -k kdelibs' But I noticed that the portage tree does not contain my version of gcc gcc-3.3.4-r1 it jumps from 3.3.2 to 3.3.5 Is that significant? It is no more in portage, period. But this make me think your system is quite dated, when did you do an emerge --sync last time? Furthermore, what is the output of gcc-config -l ? Ciao Francesco -- Linux Version 2.6.12-rc1, Compiled #7 Sun Mar 20 08:26:19 CET 2005 One 1.53GHz AMD Athlon XP Processor, 2.5GB RAM, 3022.84 Bogomips Total macula -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: Is there an xfce4 user in the house?
Nick Rout [EMAIL PROTECTED] writes: On Sun, 2005-03-27 at 06:31 -0600, Harry Putnam wrote: I'm trying to run xfce4 genlop xfce4 reports only: * xfce-base/xfce4 But I did emerge xfce4-session with no errors .. not sure why it doesn't show up. because genlop xfce4 searches only for the package named xfce4, not xfce4-session or any name just containing xfce4. You might try genlop -l |grep xfce4 On startup, I see a lightblue backgroud with the icon mouse blinking for a few seconds .. maybe 15-20 and then the screen goes a sort of tweed (grey and white speckles) and cursor becomes an X. Any apps started appear with the title bar just out of site above the top of screen so they cannot be moved/resized etc. They don't appear in the taskbar pager. As a general X tip, hold down the Alt key and click-drag anywhere in the window - that way you do not need to be able to reach the title bar. Holding down alt and click/dragging has no effect whatever here, other than to highlight any text I drag over. Have you emerge xfce4-panel and does it appear? Yes, panel appears and I can get to config icon and other stuff. I expected to see any apps running appear in the pager but do not. I see a 4 pane pager.. all blank. I have no .xfce4 in ~/ .. .. Should it have been copied there? I have one, I am not sure where it came from. I see now its ~/.config/xfce4 xfce4-session I haven't used xfce4 for a couple yrs but in older versions one had an .xfce/ with lots of config files under it. I see everything is now in xml. The fact that the default blue screen with mouse icon appears at first then stops and turns to the ugly tween screen with X shaped mouse cursor, would seem to mean something important isn't loading. I'm discovering too, that if I start an xterm and type xffm to bringup the filemanager, I get an error about not being able to load shared libraries `libxfce4mcs-client.so.1'. A find search shows that file is not present on the system: root # find /usr/lib -iname 'libxfce4mcs-client*' /usr/lib/libxfce4mcs-client.la /usr/lib/libxfce4mcs-client.so /usr/lib/pkgconfig/libxfce4mcs-client-1.0.pc /usr/lib/libxfce4mcs-client.so.2 /usr/lib/libxfce4mcs-client.so.2.0.3 /usr/lib/libxfce4mcs-client.a So maybe there something still not installed. Do you have that file in /usr/lib? -- gentoo-user@gentoo.org mailing list
[gentoo-user] probing IDE interfaces
I just noticed error messages in dmesg which shouldn't be there: ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: SAMSUNG SP0802N, ATA DISK drive hdb: SAMSUNG SP0802N, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: PLEXTOR CD-R PX-W5224A, ATAPI CD/DVD-ROM drive hdd: PLEXTOR DVD-ROM PX-116A2 0100, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! It keeps on until ide5. Since I only have the two usual ide controllers, this appears harmless, but why should an inexistent controller be probed? Kernel: 2.6.10-gentoo-r4 sys-fs/udev-045 -- Jorge Almeida -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: emerge/make failure i386 vs i686
Francesco Talamona [EMAIL PROTECTED] writes: But I noticed that the portage tree does not contain my version of gcc gcc-3.3.4-r1 it jumps from 3.3.2 to 3.3.5 Is that significant? It is no more in portage, period. But this make me think your system is quite dated, when did you do an emerge --sync last time? Furthermore, what is the output of gcc-config -l ? The system was installed 3 days ago from the most current 2004.3 livecd. I then used the stage2 approach. I ran emerge -sync yesterday gcc-config -l [1] i686-pc-linux-gnu-3.3.4 * -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: emerge/make failure i386 vs i686
On Sunday 27 March 2005 16:05, Harry Putnam wrote: Francesco Talamona [EMAIL PROTECTED] writes: But I noticed that the portage tree does not contain my version of gcc gcc-3.3.4-r1 it jumps from 3.3.2 to 3.3.5 Is that significant? It is no more in portage, period. But this make me think your system is quite dated, when did you do an emerge --sync last time? Furthermore, what is the output of gcc-config -l ? The system was installed 3 days ago from the most current 2004.3 livecd. I then used the stage2 approach. I ran emerge -sync yesterday gcc-config -l [1] i686-pc-linux-gnu-3.3.4 * What is the output of emerge -p gcc, then? for a x86 stable box it should be [ebuild NS ] sys-devel/gcc-3.3.5-r1 guessing You did a fresh sync, but didn't update packages emerge -pDuv world should tell what to update. /guessing Ciao Francesco -- Linux Version 2.6.12-rc1, Compiled #7 Sun Mar 20 08:26:19 CET 2005 One 1.53GHz AMD Athlon XP Processor, 2.5GB RAM, 3022.84 Bogomips Total macula -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Root shell doesn't source bashrc
On 16:11 Fri 25 Mar , Harry Putnam wrote: On a root login and although root's shell is bash, the .bashrc file I created is not sourced. Is this a local config problem or a default system setting somewhere. Far as I know, when using bash it is supposed to look for .bash_profile/profile (in that order) and then .bashrc when invoked. Bash sources /etc/profile, then either ~/.bash_profile, ~/.bash_login, or ~/.profile, in that order. In order for ~/.bashrc to be sourced, you need to do it from one of these files with a line like this: [ -f ~/.bashrc ] . ~/.bashrc That's for a login shell anyway. See the bash man page or info pages for more. HTH. Bill -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] No-ip.com Client
The no-ip updater is available in portage: net-dns/noip-updater and you can install it with emerge. If you do that, a script will be installed in /etc/init.d (/etc/init.d/noip). Use the command # rc-update add noip-updater default I'm using it, and it works really fine. You should try it. -- Bruno Lustosa, aka Lofofora | Email: [EMAIL PROTECTED] Network Administrator/Web Programmer | ICQ: 1406477 Rio de Janeiro - Brazil | -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] libtool: link: `/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.4/libstdc++.la' is not a valid libtool archive
On Thursday 13 January 2005 10:49 am, Boyd Stephen Smith Jr. wrote: If you get an error like this: libtool: link: `/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.4/libstdc++.la' is not a valid libtool archive during an emerge, the solution is: (as root) fix_libtool_files.sh 3.3.4 Please retrict any further queries on this issue to this thread. While I believe this is the only file reported as affected, any .la file in the same directory can be fixed the same way. Here is the output I'm getting: /bin/sh ../../../libtool --silent --mode=link --tag=CXX i686-pc-linux-gnu-g++ -Wnon-virtual-dtor -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -Wwrite-strings -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -fomit-frame-pointer -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION-o kspell_aspell.la -rpath /usr/kde/3.3/lib/kde3 -module -no-undefined -Wl,--no-undefined-Wl,--allow-shlib-undefined -avoid-version -module -no-undefined -Wl,--no-undefined -Wl,--allow-shlib-undefined -R /usr/kde/3.3/lib -R /usr/qt/3/lib -R /usr/lib kspell_aspellclient.lo kspell_aspelldict.lo ../../libkspell2.la -laspell grep: /usr/lib/gcc-lib/i386-pc-linux-gnu/3.3.4/libstdc++.la: No such file or directory /bin/sed: can't read /usr/lib/gcc-lib/i386-pc-linux-gnu/3.3.4/libstdc++.la: No such file or directory libtool: link: `/usr/lib/gcc-lib/i386-pc-linux-gnu/3.3.4/libstdc++.la' is not a valid libtool archive make[4]: *** [kspell_aspell.la] Error 1 make[4]: Leaving directory `/var/tmp/portage/kdelibs-3.3.2-r5/work/kdelibs-3.3.2/kspell2/plugins/aspell' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/var/tmp/portage/kdelibs-3.3.2-r5/work/kdelibs-3.3.2/kspell2/plugins' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/var/tmp/portage/kdelibs-3.3.2-r5/work/kdelibs-3.3.2/kspell2' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/kdelibs-3.3.2-r5/work/kdelibs-3.3.2' make: *** [all] Error 2 I've tried the command given above, and while it generates some output, building continues to fail with the same error. [EMAIL PROTECTED] ~] fix_libtool_files.sh 3.3.4 * Scanning libtool files for hardcoded gcc library paths... * [1/5] Scanning /lib ... * [2/5] Scanning /usr/lib ... * [3/5] Scanning /usr/kde/3.3/lib ... * [4/5] Scanning /usr/local/lib ... * [5/5] Scanning /usr/qt/3/lib ... -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] xine problems
On Sat, 2005-03-26 at 23:15 -0500, Walter Dnes wrote: Huh?!?!? Actually, it's sort of right. Before emerging xine-ui, there was nothing. Afterwards, I get... [m450][waltdnes][~]ll /usr/X11R6/bin/xine* -rwxr-xr-x 1 root root 725828 Mar 26 19:09 /usr/X11R6/bin/xine -rwxr-xr-x 1 root root 41495 Mar 26 19:09 /usr/X11R6/bin/xine-bugreport -rwxr-xr-x 1 root root 41495 Mar 26 19:09 /usr/X11R6/bin/xine-check -rwxr-xr-x 1 root root 2036 Mar 26 18:36 /usr/X11R6/bin/xine-config -rwxr-xr-x 1 root root 116660 Mar 26 19:09 /usr/X11R6/bin/xine-remote [m450][waltdnes][~]ll /usr/bin/xine* -rwxr-xr-x 1 root root 725828 Mar 26 19:09 /usr/bin/xine -rwxr-xr-x 1 root root 41495 Mar 26 19:09 /usr/bin/xine-bugreport -rwxr-xr-x 1 root root 41495 Mar 26 19:09 /usr/bin/xine-check -rwxr-xr-x 1 root root 2036 Mar 26 18:36 /usr/bin/xine-config -rwxr-xr-x 1 root root 116660 Mar 26 19:09 /usr/bin/xine-remote Those aren't symlinks, they're identical duplicates, bot sets installed by one emerge. I can't help with the actual problem, but the reason for the duplicates is that /usr/X11R6 is a symlink to /usr so the files are the same files. Ypu can see this by doing an ls -il and looking at the inode numbers. Regards, Paul -- My Gentoo stuff: http://varnerfamily.org/pvarner/gentoo -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Problem With Tulip Module
On Sunday 27 March 2005 05:04 am, Kathy Wills wrote: ---big snip--- Kernel version is 2.6.11-r4. I'm using the tulip module that I have always used. From kernel .config: # Tulip family network device support # CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_TULIP=m CONFIG_TULIP_MWI=y CONFIG_TULIP_MMIO=y CONFIG_TULIP_NAPI=y CONFIG_TULIP_NAPI_HW_MITIGATION=y CONFIG_DE4X5=m CONFIG_WINBOND_840=m CONFIG_DM9102=m Did some googling and it seems that the error message can be ignored, unless of course it's giving you operational problems. From what I have read, it appears to be a hardware mix problem involving dma issues. Over here I run MSI, SOYOTEC and ABIT motherboards and as I mentioned in my previous email, no such error message has turned up in either messages or dmesg output. Try pulling the linksys card, clean the edge and slap in back into the motherboard in a different slot. -- ** Registered Linux User Number 185956 FSF Associate Member number 2340 since 05/20/2004 Join me in chat at #linux-users on irc.freenode.net Buy an Xbox for $149.00, run linux on it and Microsoft loses $150.00! 10:39am up 168 days, 18:25, 8 users, load average: 0.10, 0.13, 0.09 -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] 2005.0 available?
Julien Cayzac wrote: On Fri, 25 Mar 2005 19:22:53 +, Neil Bothwick [EMAIL PROTECTED] wrote: Occasionally, but you'll get a warning that you need to do this when you sync. I think the last time this happened on x86 was when the 1.4 profile was deprecated last year. Even after syncing, I still don't get any make.defaults, so eix is now broken: # eix -u Updating eix database in /var/cache/eix Using portage cache: /usr/portage/metadata/cache/ varsreader.cc:309 Can't open file /etc/../usr/portage/profiles/default-linux/x86/2005.0/make.defaults No such file or directory Well, eix is broken anyway if it expects there to be a make.defaults in every profile directory. -- Andrew Gaffneyhttp://dev.gentoo.org/~agaffney/ Gentoo Linux Developer Installer Project -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Local vs. remote startx/Gnome
On Sat, 26 Mar 2005 21:17:44 -0500, Calvin Walton [EMAIL PROTECTED] wrote: On Sat, 26 Mar 2005 15:55:13 -0800, Mark Knecht [EMAIL PROTECTED] wrote: ssh -X -Y -C -c blowfish -l mark IP-address I'm now logged on successfully to a remote machine. I can run X apps and display them here successfully. Let's say that I wanted to run Gnome on the machine at the other end but see it displayed here on display #2. How can I do that? If I do the same startx -- :2 it creates a second display at the far end. I'd like to pipe that to a second display here but I haven't grasped how to do that. Ssh forwards windows from the remote computer to whatever display you have set in your DISPLAY variable on the local computer. So, in this case, you would want to start the xserver on your local computer, then run DISPLAY=:2 ssh -X -Y -C -c blowfish -l mark IP-address to forward apps on the remote computer to your second local display Calvin, Thanks for the response. This does indeed work, but doesn't do what I want to do. This will display an app like Evolution running on the remote box on my second display instead of the first display. That's cool but it requires some window manager like Gnome be running here locally. What I actually want to do is start Gnome on the remote box and see the whole Gnome desktop on my local box's second display. I do not want to upset the locally running window manager. Any ideas on how I do that? Thanks, Mark -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Local vs. remote startx/Gnome
On Sunday 27 March 2005 16:35, Mark Knecht wrote: What I actually want to do is start Gnome on the remote box and see the whole Gnome desktop on my local box's second display. I do not want to upset the locally running window manager. Any ideas on how I do that? I think you might find nx interesting. You need to install nxserver (freenx) on the remote box, and a client on the local box. There is an howto at http://www.gentoo.org/doc/en/nx-guide.xml If you don't need to startx but connecting to a running session is enough, you could also install one of the many vnc servers available (x11vnc, xf4vnc) on the remote box, and display the remote desktop on the local machine. As another solution (untested and don't know whether it works), you might try to redirect the remote DISPLAY variable to the local box (with ssh -X, port forwarding or the other usual ways), and then try running something like gnome-session on the remote box, and see if the whole session comes up and is displayed on the local box (with startkde this kind of works, but is awkward). Even if this work, IMHO nx is far cleaner and more efficient. HTH -- Linux: because a PC is a terrible thing to waste -- [EMAIL PROTECTED] put this on Tshirts in '93 -- gentoo-user@gentoo.org mailing list
[gentoo-user] xorg -- orphans
Hello everyone, After emerge xorg some orphaned symlinks were found. /usr/X11R6/lib/X11/fonts/CID,Speedo pointed to non-existent files in //usr/share/fonts(what's with the double'/'?). These are flashing red bold-white. /etc/X11/X points to /usr/X11R6/bin/Xorg which *does* exist where it's supposed to but is listed in non-flashing red plain-white, also an orphan according to DIR_COLORS. On linux.gentoo.dev there is some discussion of the bad font links. Too technical for me, the upshot seems to be it's not really a big deal. Couldn't find anything about Xorg. Question: I haven't configured X yet; will this solve the problem? -mw __ Do you Yahoo!? Yahoo! Small Business - Try our new resources site! http://smallbusiness.yahoo.com/resources/ -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Local vs. remote startx/Gnome
On Sunday 27 March 2005 08:35, Mark Knecht wrote: What I actually want to do is start Gnome on the remote box and see the whole Gnome desktop on my local box's second display. I do not want to upset the locally running window manager. Any ideas on how I do that? Do you run *dm on the remote box? If so, you might want to read up on XDMCP which can do what you want, though I don't know how to ssh-tunnel it (if you want to do that) --electronerd pgppDRIpUruZv.pgp Description: PGP signature
Re: [gentoo-user] gentoo-sources vs. gentoo-dev-sources
On 03/26/05 17:52, Jörgen Andersson wrote: Hi I'm currently on to my very first Gentoo installation and just sitting around waiting for my system to finish the bootstrap.sh. Meanwhile I've been looking around a great deal and started to think about what kernel-package to use. I can't see any reason for not going with a 2.6-kernel and I suppose that is the way Gentoo's default will be moving as well. In doing so I thought using the gentoo-sources already now would save me some time over going with gentoo-dev-sources now and later switch to gentoo-sources. However, all version 2.6.x are masked in gentoo-sources. 2.6.11-r4 is marked as stable, but still masked. I can see the very same version is available in gentoo-dev-sources. Would it then be ok for me to echo =kernel/gentoo-sources-2.6.11-r4 /etc/portage/package.unmask in order to avoid having to switch packages later on? Or am I missing some heavy reason why the 2.6.x kernels is masked in gentoo-sources? /Jörgen Just use gentoo-dev-sources for the moment. I don't see how it would be any trouble to switch later on. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Local vs. remote startx/Gnome
On Saturday 26 March 2005 05:55 pm, Mark Knecht wrote: ssh -X -Y -C -c blowfish -l mark IP-address I'm now logged on successfully to a remote machine. I can run X apps and display them here successfully. Let's say that I wanted to run Gnome on the machine at the other end but see it displayed here on display #2. How can I do that? If I do the same startx -- :2 it creates a second display at the far end. I'd like to pipe that to a second display here but I haven't grasped how to do that. Do it the same.. Bring up X using a rudementry windows manager. SSH over to the other box, gnome-session should bring it up. startx is overwriting your $display.. dont run that. Jeff -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Local vs. remote startx/Gnome
On Saturday 26 March 2005 05:55 pm, Mark Knecht wrote: I'm now logged on successfully to a remote machine. I can run X apps and display them here successfully. Let's say that I wanted to run Gnome on the machine at the other end but see it displayed here on display #2. How can I do that? If I do the same startx -- :2 it creates a second display at the far end. I'd like to pipe that to a second display here but I haven't grasped how to do that. Little google'in produced: http://www.issociate.de/board/post/28886/remote_X_sessions.html Thats how you can automate the task. Of course, passwordless ssh sessions would be required.. Jeff -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] libtool: link: `/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.4/libstdc++.la' is not a valid libtool archive
On Sunday 27 March 2005 10:35 am, David Corbin wrote: On Thursday 13 January 2005 10:49 am, Boyd Stephen Smith Jr. wrote: If you get an error like this: libtool: link: `/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.4/libstdc++.la' is not a valid libtool archive during an emerge, the solution is: (as root) fix_libtool_files.sh 3.3.4 Please retrict any further queries on this issue to this thread. While I believe this is the only file reported as affected, any .la file in the same directory can be fixed the same way. Here is the output I'm getting: /bin/sh ../../../libtool --silent --mode=link --tag=CXX i686-pc-linux-gnu-g++ -Wnon-virtual-dtor -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -Wwrite-strings -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -fomit-frame-pointer -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION-o kspell_aspell.la -rpath /usr/kde/3.3/lib/kde3 -module -no-undefined -Wl,--no-undefined-Wl,--allow-shlib-undefined -avoid-version -module -no-undefined -Wl,--no-undefined -Wl,--allow-shlib-undefined -R /usr/kde/3.3/lib -R /usr/qt/3/lib -R /usr/lib kspell_aspellclient.lo kspell_aspelldict.lo ../../libkspell2.la -laspell grep: /usr/lib/gcc-lib/i386-pc-linux-gnu/3.3.4/libstdc++.la: No such file or directory /bin/sed: can't read /usr/lib/gcc-lib/i386-pc-linux-gnu/3.3.4/libstdc++.la: No such file or directory libtool: link: `/usr/lib/gcc-lib/i386-pc-linux-gnu/3.3.4/libstdc++.la' is not a valid libtool archive make[4]: *** [kspell_aspell.la] Error 1 make[4]: Leaving directory `/var/tmp/portage/kdelibs-3.3.2-r5/work/kdelibs-3.3.2/kspell2/plugins/aspel l' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/var/tmp/portage/kdelibs-3.3.2-r5/work/kdelibs-3.3.2/kspell2/plugins' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/var/tmp/portage/kdelibs-3.3.2-r5/work/kdelibs-3.3.2/kspell2' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/kdelibs-3.3.2-r5/work/kdelibs-3.3.2' make: *** [all] Error 2 I've tried the command given above, and while it generates some output, building continues to fail with the same error. [EMAIL PROTECTED] ~] fix_libtool_files.sh 3.3.4 * Scanning libtool files for hardcoded gcc library paths... * [1/5] Scanning /lib ... * [2/5] Scanning /usr/lib ... * [3/5] Scanning /usr/kde/3.3/lib ... * [4/5] Scanning /usr/local/lib ... * [5/5] Scanning /usr/qt/3/lib ... What's the output of gcc-config -l(that's a small L, not i) for example, mine is: [EMAIL PROTECTED] ~ $ gcc-config -l [1] i686-pc-linux-gnu-3.3.4 [2] i686-pc-linux-gnu-3.4.3-20050110 * [3] i686-pc-linux-gnu-3.4.3-20050110-hardened [4] i686-pc-linux-gnu-3.4.3-20050110-hardenednopie [5] i686-pc-linux-gnu-3.4.3-20050110-hardenednossp When you do the fix_libtool_files.sh x.x.x thing, you need to refer to the gcc version previously used, not the current one- at least that's what worked for me. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] xfmedia Segmentation fault
Make sure you have the D-BUS daemon running: # emerge sys-apps/dbus # /etc/init.d/dbus start See if that helps. Hi Peter, I don't have dbus running (although it is installed), but I am going to stick with 2.6.11. The only problem I've found with it is my touchpad doesn't register small movements. It's really annoying actually. But should I add dbus to the default runlevel anyway? - Grant -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] quickpkg
A little while ago Neil turned me on to quickpkg. It sounds like a great way to protect yourself from the new package blues. Is anyone using it like that? What would be the best way to assure that your system always has a backup copy of your current version of a package available before emerging a new one? A more reliable method, assuming you have the drive space, is to add buildpkg to FEATURES in make.conf. Then emerge will automatically build a package when installing a package. It also means the package is verified, because ebuild builds it then installs from the package it just built, not the files in $PORTAGE_TMPDIR. If I'm understanding it correctly, FEATURES=buildpkg sounds less reliable for failed upgrade recovery. If you want to roll back to a previous version of a package, you're going to end up with what was originally installed, not what was working on your system right before the upgrade, right? Also, I tried to use quickpkg to protect me from any problems upgrading xorg and I ended up totally screwed. I quickpackaged my installed xorg, emerged the latest xorg, it wouldn't start, I tried to 'emerge -K xorg-x11', it said it was blocked by xorg-x11, I unmerged xorg-x11, it still said it was blocked, I tried to unmerge xorg-x11 again and it said it wasn't installed. It does sound like a portage problem instead of a quickpkg problem. I've finally gotten xorg working again thanks to a closed bug record, and let me tell you this: 1. don't emerge hardened xorg without dlloader 2. lynx doesn't work with gmail (predictable) - Grant Neil Bothwick -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: Is there an xfce4 user in the house?
Brett I. Holcomb [EMAIL PROTECTED] writes: Something didn't get installed correctly. All I did was emerge xfce4 and it will list everything that needs to go in. Also there is no .xfce4 for 4.2 - they use a ~/.config directory. Once it's installed you can do startxfce4 and see what happens. If that works set up rc.conf. Yeah, I finally noticed the ~/.config. I'm still confused here though. Right now I'm running a major compile of kde so I can't really try reinstalling xfce4 until that finishes. Which appears to be sometime next week : ). But here's whats throwing me: qpkg shows a bunch of xfce4 pkgs as installed but emerge -v -p xfce4 shows a bunch to be installed. Quite a file are the same ones. So does emerge not know what is or is not installed? Or something else likely to be wrong? a qpkg -I |grep xfce shows this: x11-themes/gtk-engines-xfce xfce-base/libxfce4mcs xfce-base/libxfce4util xfce-base/libxfcegui4 xfce-base/xfce-mcs-manager xfce-base/xfce-mcs-plugins xfce-base/xfce-utils xfce-base/xfce4 xfce-base/xfce4-base xfce-base/xfce4-panel xfce-base/xfce4-session xfce-base/xfdesktop xfce-base/xffm xfce-base/xfprint xfce-base/xfwm4 xfce-extra/xfcalendar xfce-extra/xfce4-battery xfce-extra/xfce4-iconbox xfce-extra/xfce4-minicmd xfce-extra/xfce4-mixer xfce-extra/xfce4-netload xfce-extra/xfce4-showdesktop xfce-extra/xfce4-systemload xfce-extra/xfce4-systray xfce-extra/xfce4-themes xfce-extra/xfce4-toys xfce-extra/xfce4-trigger-launcher xfce-extra/xffm-icons xfce-extra/xfwm4-themes But running: emerge -v -p xfcef These are the packages that I would merge, in order: Calculating dependencies ...done! [blocks B ] xfce-base/xfce4-base (from pkg xfce-base/xfce4-4.2.0) [ebuild U ] xfce-extra/xfcalendar-4.2.0 [0.1.9] -debug -doc 301 kB [ebuild UD] xfce-base/libxfce4util-4.2.0 [4.2.1] -debug -doc 0 kB [ebuild UD] xfce-base/libxfcegui4-4.2.0 [4.2.1] -debug -doc 0 kB [ebuild UD] xfce-base/libxfce4mcs-4.2.0 [4.2.1] -debug -doc 0 kB [ebuild N] xfce-extra/xfce4-appfinder-4.2.0 -debug -doc 329 kB [ebuild U ] xfce-extra/xfce4-mixer-4.2.0 [4.0.6] -alsa -debug -doc 370 kB [ebuild UD] xfce-base/xfce-mcs-manager-4.2.0 [4.2.1] -debug -doc 0 kB [ebuild UD] xfce-base/xfce-utils-4.2.0 [4.2.1] -debug -doc -gtkhtml 567 kB [ebuild UD] xfce-base/xfce4-session-4.2.0 [4.2.1] -debug -doc 1,096 kB [ebuild U ] xfce-base/xfwm4-4.2.0 [4.0.6] -debug -doc 856 kB [ebuild U ] xfce-extra/xfce4-trigger-launcher-4.2.0 [4.0.6] -debug -doc 235 kB [ebuild U ] xfce-extra/xfce4-toys-4.2.0 [4.0.6] -debug -doc 285 kB [ebuild N] xfce-extra/xfce4-icon-theme-4.2.0 -debug -doc 1,290 kB [ebuild U ] xfce-extra/xfce4-systray-4.2.0 [4.0.6] -debug -doc 199 kB [ebuild U ] xfce-extra/xfwm4-themes-4.2.0 [4.0.6] -debug -doc 457 kB [ebuild U ] xfce-base/xfprint-4.2.0 [4.0.6] -debug -doc 530 kB [ebuild U ] xfce-base/xffm-4.2.0 [4.0.6] -debug -doc 2,315 kB [ebuild U ] xfce-extra/xfce4-iconbox-4.2.0 [4.0.6] -debug -doc 280 kB [ebuild U ] xfce-base/xfdesktop-4.2.0 [4.0.6] -debug -doc 2,375 kB [ebuild U ] xfce-base/xfce4-4.2.0 [4.0.6] -debug -doc 0 kB Total size of downloads: 11,491 kB -- gentoo-user@gentoo.org mailing list
[gentoo-user] Wireless went kaboom
It had been a long while, so I ran an emerge -uDvp world. Now, my wireless doesn't work. I tried manual: iwconfig wlan0 essid Arachne key s: open I get: Error for wireless request Set encode (8B2A : SET failed on device wlan0 ; Invalid argument. iwconfig: IEEE 80211g ESSID:off/any Nickname: Arachne /etc/init.d/net.wlan0 start: Starting wlan0 Configuring wireless network for wlan0 Couldn't associate with any access points on wlan0 Failed to configure wireless for wlan0 /etc/conf.d/wireless is unchanged from when it worked, as is /etc/conf.d/net. The symlinks in /etc/init.d are also unchanged.I have baselayout 1.11.10-r4. At boot: wlan0: ndiswrapper ethernet device mac address using driver netwg511 wlan0: encryption modes supported: WEP, WPA with TKIP, WPA with AES/CCMP All the ndiswrapper stuff looks OK as far as I can tell. Any advice appreciated. Thanks. -- -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: emerge/make failure i386 vs i686
Francesco Talamona [EMAIL PROTECTED] writes: On Sunday 27 March 2005 16:05, Harry Putnam wrote: Francesco Talamona [EMAIL PROTECTED] writes: But I noticed that the portage tree does not contain my version of gcc gcc-3.3.4-r1 it jumps from 3.3.2 to 3.3.5 Is that significant? It is no more in portage, period. But this make me think your system is quite dated, when did you do an emerge --sync last time? Furthermore, what is the output of gcc-config -l ? The system was installed 3 days ago from the most current 2004.3 livecd. I then used the stage2 approach. I ran emerge -sync yesterday gcc-config -l [1] i686-pc-linux-gnu-3.3.4 * What is the output of emerge -p gcc, then? Calculating dependencies ...done! [ebuild U ] sys-devel/gcc-3.3.5-r1 [3.3.4-r1] (-altivec) -bootstrap -boundschecking -build -debug +fortran* -gcj +gtk* -hardened (-ip28) (-multilib) -multislot (-n32) (-n64) +nls -nocxx -objc -static (-uclibc) 23,578 kB Total size of downloads: 23,578 kB Gack... for a x86 stable box it should be [ebuild NS ] sys-devel/gcc-3.3.5-r1 guessing You did a fresh sync, but didn't update packages emerge -pDuv world should tell what to update. /guessing Yikes.. good guess. And maybe this is the source of some other probs I've been posting about. Can't try the remedy just now until the lenghthy compile of kde ends, which appears may be in the next millinium. But wait, I just thought... maybe it would be a good idea to kill that and take care of the updating ... seems maybe the build of kde will have problems otherwise. Do you think I should kill the kde build? It really does take a very long time -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Local vs. remote startx/Gnome
On Sun, 27 Mar 2005 09:31:03 -0800, John Myers [EMAIL PROTECTED] wrote: On Sunday 27 March 2005 08:35, Mark Knecht wrote: What I actually want to do is start Gnome on the remote box and see the whole Gnome desktop on my local box's second display. I do not want to upset the locally running window manager. Any ideas on how I do that? Do you run *dm on the remote box? If so, you might want to read up on XDMCP which can do what you want, though I don't know how to ssh-tunnel it (if you want to do that) I do not (currently) run *dm on the remote machine. I do run one locally.) I may have to look into that more. Not sure. I Really don't understand this yet. Thanks, Mark -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Local vs. remote startx/Gnome
On Sun, 27 Mar 2005 12:06:27 -0600, Jeff Smelser [EMAIL PROTECTED] wrote: On Saturday 26 March 2005 05:55 pm, Mark Knecht wrote: I'm now logged on successfully to a remote machine. I can run X apps and display them here successfully. Let's say that I wanted to run Gnome on the machine at the other end but see it displayed here on display #2. How can I do that? If I do the same startx -- :2 it creates a second display at the far end. I'd like to pipe that to a second display here but I haven't grasped how to do that. Little google'in produced: http://www.issociate.de/board/post/28886/remote_X_sessions.html Interesting read, but I think it's probably too far over my head.. Thanks, Mark -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: emerge/make failure i386 vs i686
On Sunday 27 March 2005 20:46, Harry Putnam wrote: But wait, I just thought... maybe it would be a good idea to kill that and take care of the updating ... seems maybe the build of kde will have problems otherwise. Do you think I should kill the kde build? It really does take a very long time You can just wait and interrupt the emerge between two different packages. Those already emerged will not be reemerged. In the meantime do emerge -f gcc in another shell/term to save some time :-) Ciao Francesco -- Linux Version 2.6.12-rc1, Compiled #7 Sun Mar 20 08:26:19 CET 2005 One 1.53GHz AMD Athlon XP Processor, 2.5GB RAM, 3022.84 Bogomips Total macula -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Wireless went kaboom
Ed Jabbour ([EMAIL PROTECTED]) scribbled: It had been a long while, so I ran an emerge -uDvp world. Now, my wireless doesn't work. I tried manual: iwconfig wlan0 essid Arachne key s: open I get: Error for wireless request Set encode (8B2A : SET failed on device wlan0 ; Invalid argument. iwconfig: IEEE 80211g ESSID:off/any Nickname: Arachne I've had great success with: # iwconfig ath0 essid MyESSIDName mode managed channel 6 enc \ 0011-2233-4455-6677-8899-AABB-CC /etc/init.d/net.wlan0 start: Starting wlan0 Configuring wireless network for wlan0 Couldn't associate with any access points on wlan0 Failed to configure wireless for wlan0 I've recently had the same trouble with gentoo's init scripts, hence, the above command. /etc/conf.d/wireless is unchanged from when it worked, as is /etc/conf.d/net. The symlinks in /etc/init.d are also unchanged.I have baselayout 1.11.10-r4. At boot: wlan0: ndiswrapper ethernet device mac address using driver netwg511 wlan0: encryption modes supported: WEP, WPA with TKIP, WPA with AES/CCMP All the ndiswrapper stuff looks OK as far as I can tell. Any advice appreciated. Thanks. It looks like the bug is in gentoo's initscripts... Give the command above a try (with your info, of course) and let us know what happens. hth, Cooper. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: Is there an xfce4 user in the house?
* On Sun Mar-27-2005 at 12:38:41 PM -0600, Harry Putnam said: [...] But running: emerge -v -p xfce [snip emerge output] You currently have some packages installed from Xfce 4.2.1 and some others from 4.0.6. No wonder there are problems! :) I have no idea how that happened. Perhaps you have changed between arch and ~arch recently. It doesn't really matter, if you run that emerge command it looks as though it will install all Xfce 4.2.0 packages. Try that out and report back... -- Sami Samhuri pgp2PhaQ3yzp5.pgp Description: PGP signature
[gentoo-user] Lame fonts in xorg (bitmap-fonts ?)
I'm seeing crappy fonts in Firefox since emerging the latest xorg version, and I am using the truetype-fonts USE flag. I emerged it once without the bitmap-fonts USE flag, and the fonts looked really nice, but I noticed a message during the emerge warning me to enable bitmap-fonts. I re-emerged with bitmap-fonts enabled, and fonts have looked crappy since. I tried commenting out different font paths in xorg.conf to no avail. I did notice this in the emerge's output: ^[[32;01m*^[[0m Creating fonts.scale files... ... /usr/portage/x11-base/xorg-x11/xorg-x11-6.8.2-r1.ebuild: line 1815: 16852 Segmentation fault LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir) ${ROOT}/usr/bin/ttmkfdir -x 2 -e ${ROOT}/usr/share/fonts/encodings/encodings.dir -o ${x}/fonts.scale -d ${x} Could that have anything to do with it? - Grant -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: Is there an xfce4 user in the house?
This can happen on the upgrade from 4.0.6 to 4.2.x. He should do as you suggest and run the merge. If there are still problems (as I had) there were some packages that needed to be removed to get rid of some blocks. There is a bug on it for xfce4 in bugzilla. On Sun, 27 Mar 2005, Sami Samhuri wrote: * On Sun Mar-27-2005 at 12:38:41 PM -0600, Harry Putnam said: [...] But running: emerge -v -p xfce [snip emerge output] You currently have some packages installed from Xfce 4.2.1 and some others from 4.0.6. No wonder there are problems! :) I have no idea how that happened. Perhaps you have changed between arch and ~arch recently. It doesn't really matter, if you run that emerge command it looks as though it will install all Xfce 4.2.0 packages. Try that out and report back... -- Brett I. Holcomb [EMAIL PROTECTED] Registered Linux User #188143 Remove R777 to email -- gentoo-user@gentoo.org mailing list
[gentoo-user] Lame fonts in xorg (bitmap-fonts ?)
I'm seeing crappy fonts in Firefox since emerging the latest xorg version, and I am using the truetype-fonts USE flag. I emerged it once without the bitmap-fonts USE flag, and the fonts looked really nice, but I noticed a message during the emerge warning me to enable bitmap-fonts. I re-emerged with bitmap-fonts enabled, and fonts have looked crappy since. I tried commenting out different font paths in xorg.conf to no avail. I did notice this in the emerge's output: ^[[32;01m*^[[0m Creating fonts.scale files... ... /usr/portage/x11-base/xorg-x11/xorg-x11-6.8.2-r1.ebuild: line 1815: 16852 Segmentation fault LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir) ${ROOT}/usr/bin/ttmkfdir -x 2 -e ${ROOT}/usr/share/fonts/encodings/encodings.dir -o ${x}/fonts.scale -d ${x} Could that have anything to do with it? - Grant -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Wireless went kaboom
On Sunday 27 March 2005 02:24 pm, Jason Cooper wrote: Ed Jabbour ([EMAIL PROTECTED]) scribbled: It had been a long while, so I ran an emerge -uDvp world. Now, my wireless doesn't work. I tried manual: iwconfig wlan0 essid Arachne key s: open I get: Error for wireless request Set encode (8B2A : SET failed on device wlan0 ; Invalid argument. iwconfig: IEEE 80211g ESSID:off/any Nickname: Arachne I've had great success with: # iwconfig ath0 essid MyESSIDName mode managed channel 6 enc \ 0011-2233-4455-6677-8899-AABB-CC [snip] It looks like the bug is in gentoo's initscripts... Give the command above a try (with your info, of course) and let us know what happens. I ran what you suggested, and iwconfig now returns: IEEE 80211g ESSID: Arachne Nickname: Arachne Mode: Managed Frequency:2.462 GHz Access Point: router mac address Bit Rate . . . etc which is a heck of a lot more than I was getting before - at least the ap is recognized. Where I go from here, though, I have no clue. -- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Lame fonts in xorg (bitmap-fonts ?)
On Sun, 2005-03-27 at 11:38 -0800, Grant wrote: I'm seeing crappy fonts in Firefox since emerging the latest xorg version, and I am using the truetype-fonts USE flag. I emerged it once without the bitmap-fonts USE flag, and the fonts looked really nice, but I noticed a message during the emerge warning me to enable bitmap-fonts. I re-emerged with bitmap-fonts enabled, and fonts have looked crappy since. I tried commenting out different font paths in xorg.conf to no avail. I did notice this in the emerge's output: ^[[32;01m*^[[0m Creating fonts.scale files... ... /usr/portage/x11-base/xorg-x11/xorg-x11-6.8.2-r1.ebuild: line 1815: 16852 Segmentation fault LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir) ${ROOT}/usr/bin/ttmkfdir -x 2 -e ${ROOT}/usr/share/fonts/encodings/encodings.dir -o ${x}/fonts.scale -d ${x} Could that have anything to do with it? OK OK heard you the first time! - Grant -- gentoo-user@gentoo.org mailing list -- Nick Rout [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
[gentoo-user] KHotkeys 3.4
Hi, I get this error when I try to configure KHotkeys: An error occurred while loading settings:/Accessibility/khotkeys: The file or folder does not exist. How can I make it work? KHotkeys is emerged and seems to be running. ACCEPT_KEYWORDS=~x86 emerge -pv khotkeys These are the packages that I would merge, in order: Calculating dependencies ...done! [ebuild R ] kde-base/khotkeys-3.4.0 +arts -debug +java -kdeenablefinal +kdexdeltas -xinerama 0 kB ps uax | grep [k]hotkeys pticedric 23429 0.0 2.5 25632 13212 ?S21:30 0:00 khotkeys [kdeinit] khotkeys -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] quickpkg
On Sun, 2005-03-27 at 10:35 -0800, Grant wrote: A little while ago Neil turned me on to quickpkg. It sounds like a great way to protect yourself from the new package blues. Is anyone using it like that? What would be the best way to assure that your system always has a backup copy of your current version of a package available before emerging a new one? A more reliable method, assuming you have the drive space, is to add buildpkg to FEATURES in make.conf. Then emerge will automatically build a package when installing a package. It also means the package is verified, because ebuild builds it then installs from the package it just built, not the files in $PORTAGE_TMPDIR. If I'm understanding it correctly, FEATURES=buildpkg sounds less reliable for failed upgrade recovery. If you want to roll back to a previous version of a package, you're going to end up with what was originally installed, not what was working on your system right before the upgrade, right? wrong, as the package name contains the version information - eg xorg-x11-6.8.2-r1.tbz2 not xorg-x11.tbz2 so unless you are constantly re-installing the same package with different use flags or cflags you should get a different binary pavckage name each time. Also, I tried to use quickpkg to protect me from any problems upgrading xorg and I ended up totally screwed. I quickpackaged my installed xorg, emerged the latest xorg, it wouldn't start, I tried to 'emerge -K xorg-x11', it said it was blocked by xorg-x11, I unmerged xorg-x11, it still said it was blocked, I tried to unmerge xorg-x11 again and it said it wasn't installed. It does sound like a portage problem instead of a quickpkg problem. I've finally gotten xorg working again thanks to a closed bug record, and let me tell you this: 1. don't emerge hardened xorg without dlloader 2. lynx doesn't work with gmail (predictable) - Grant Neil Bothwick -- gentoo-user@gentoo.org mailing list -- Nick Rout [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
[gentoo-user] sys-kernel/linux-headers (is blocking sys-kernel/linux26-headers-2.6.8.1-r2)
I am getting tied in knots trying to emerge kde 3.4. I get the message sys-kernel/linux-headers (is blocking sys-kernel/linux26-headers-2.6.8.1-r2), even though emerge -C linux-headers gives me a message saying that linux-headers is not installed. The thing is that I have some version or other of the 2.6.11-mm2 sources installed, so I shouldn't need either of these packages, should I? I imagine that if I tried to install the modular kde ebuilds, as opposed to emerging monolithic kde, I might be able to work round this problem, but I would have to unmerge kde before I started wouldn't I? That would put me at risk of being without a desktop manager for quite a while if something went wrong, wouldn't it? I am also told that akgregator is blocking kdepim. Does that mean that akgregator is now part of kdepim? I would be very grateful for any help on this. I need to upgrade because 3.3 has a serious bug that I need to get away from. Many thanks Robert -- Robert Persson [EMAIL PROTECTED] YahooMess:ireneshusband AIM:shamanicpolice No matter how much ye shake yer peg The last wee drap rins doon yer leg. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Lame fonts in xorg (bitmap-fonts ?)
Grant wrote: I did notice this in the emerge's output: ^[[32;01m*^[[0m Creating fonts.scale files... ... /usr/portage/x11-base/xorg-x11/xorg-x11-6.8.2-r1.ebuild: line 1815: 16852 Segmentation fault LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir) ${ROOT}/usr/bin/ttmkfdir -x 2 -e emerge --oneshot ttmkfdir; and try xorg again. Benno -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] sys-kernel/linux-headers (is blocking sys-kernel/linux26-headers-2.6.8.1-r2)
On Sun, 2005-03-27 at 12:37 -0800, Robert Persson wrote: I am getting tied in knots trying to emerge kde 3.4. I get the message sys-kernel/linux-headers (is blocking sys-kernel/linux26-headers-2.6.8.1-r2), even though emerge -C linux-headers gives me a message saying that linux-headers is not installed. I had this problem last night. emerge linux26-headers solved it. The thing is that I have some version or other of the 2.6.11-mm2 sources installed, so I shouldn't need either of these packages, should I? yes, don't ask me why, I asked once but didn't understand the replies, I just nodded sagely ... -- Nick Rout [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Wireless went kaboom
Ed Jabbour ([EMAIL PROTECTED]) scribbled: On Sunday 27 March 2005 02:24 pm, Jason Cooper wrote: Ed Jabbour ([EMAIL PROTECTED]) scribbled: It had been a long while, so I ran an emerge -uDvp world. Now, my wireless doesn't work. I tried manual: iwconfig wlan0 essid Arachne key s: open I get: Error for wireless request Set encode (8B2A : SET failed on device wlan0 ; Invalid argument. iwconfig: IEEE 80211g ESSID:off/any Nickname: Arachne I've had great success with: # iwconfig ath0 essid MyESSIDName mode managed channel 6 enc \ 0011-2233-4455-6677-8899-AABB-CC [snip] It looks like the bug is in gentoo's initscripts... Give the command above a try (with your info, of course) and let us know what happens. I ran what you suggested, and iwconfig now returns: IEEE 80211g ESSID: Arachne Nickname: Arachne Mode: Managed Frequency:2.462 GHz Access Point: router mac address Bit Rate . . . etc which is a heck of a lot more than I was getting before - at least the ap is recognized. Where I go from here, though, I have no clue. Oops, forgot that part. Assuming your AP is running a dhcp server, all you should have to do now is: # dhcpcd ath0 Mine takes 10 to 30 seconds before it returns the prompt to me. Not sure why... Then I ping google.com for good measure. hth, Cooper. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] quickpkg
On Sun, 27 Mar 2005 10:35:09 -0800, Grant wrote: If I'm understanding it correctly, FEATURES=buildpkg sounds less reliable for failed upgrade recovery. If you want to roll back to a previous version of a package, you're going to end up with what was originally installed, not what was working on your system right before the upgrade, right? Wrong. buildpkg builds a binary package for each package before installing it, so you have the current version and all previous versions, since you enabled buildpkg, in PKGDIR. It means you can rol back as far as you like. -- Neil Bothwick Things are more like they are today than they ever have been before. pgpLBkx01WBhl.pgp Description: PGP signature
[gentoo-user] Re: sys-kernel/linux-headers (is blocking sys-kernel/linux26-headers-2.6.8.1-r2)
On Sunday 27 March 2005 22:37, Robert Persson wrote: I am getting tied in knots trying to emerge kde 3.4. I get the message sys-kernel/linux-headers (is blocking sys-kernel/linux26-headers-2.6.8.1-r2), even though emerge -C linux-headers gives me a message saying that linux-headers is not installed. Any chanche it's injected? What's the exact message if you try emerge -p =sys-kernel/linux26-headers-2.6.8.1-r2 ? The thing is that I have some version or other of the 2.6.11-mm2 sources installed, so I shouldn't need either of these packages, should I? No, IIRC, it's due to nptl. I imagine that if I tried to install the modular kde ebuilds, as opposed to emerging monolithic kde, I might be able to work round this problem, but I would have to unmerge kde before I started wouldn't I? That would put me at risk of being without a desktop manager for quite a while if something went wrong, wouldn't it? I am also told that akgregator is blocking kdepim. Does that mean that akgregator is now part of kdepim? http://forums.gentoo.org/viewtopic-p-2100299-highlight-konquerorakregator.html#2100299 I would be very grateful for any help on this. I need to upgrade because 3.3 has a serious bug that I need to get away from. Many thanks Robert Ciao Francesco -- Linux Version 2.6.12-rc1, Compiled #7 Sun Mar 20 08:26:19 CET 2005 One 1.53GHz AMD Athlon XP Processor, 2.5GB RAM, 3022.84 Bogomips Total macula -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Lame fonts in xorg (bitmap-fonts ?)
I did notice this in the emerge's output: ^[[32;01m*^[[0m Creating fonts.scale files... ... /usr/portage/x11-base/xorg-x11/xorg-x11-6.8.2-r1.ebuild: line 1815: 16852 Segmentation fault LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir) ${ROOT}/usr/bin/ttmkfdir -x 2 -e emerge --oneshot ttmkfdir; and try xorg again. Ok, do you mean emerge xorg again? - Grant Benno -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] libtool: link: `/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.4/libstdc++.la' is not a valid libtool archive
I've tried the command given above, and while it generates some output, building continues to fail with the same error. [EMAIL PROTECTED] ~] fix_libtool_files.sh 3.3.4 * Scanning libtool files for hardcoded gcc library paths... * [1/5] Scanning /lib ... * [2/5] Scanning /usr/lib ... * [3/5] Scanning /usr/kde/3.3/lib ... * [4/5] Scanning /usr/local/lib ... * [5/5] Scanning /usr/qt/3/lib ... What's the output of gcc-config -l(that's a small L, not i) for example, mine is: [EMAIL PROTECTED] ~ $ gcc-config -l [1] i686-pc-linux-gnu-3.3.4 [2] i686-pc-linux-gnu-3.4.3-20050110 * [3] i686-pc-linux-gnu-3.4.3-20050110-hardened [4] i686-pc-linux-gnu-3.4.3-20050110-hardenednopie [5] i686-pc-linux-gnu-3.4.3-20050110-hardenednossp [EMAIL PROTECTED] /usr/lib/gcc-lib] gcc-config -l [1] i686-pc-linux-gnu-3.3.5 * [2] i686-pc-linux-gnu-3.3.5-hardened [3] i686-pc-linux-gnu-3.3.5-hardenednopie [4] i686-pc-linux-gnu-3.3.5-hardenednossp When you do the fix_libtool_files.sh x.x.x thing, you need to refer to the gcc version previously used, not the current one- at least that's what worked for me. I think I did. -- gentoo-user@gentoo.org mailing list -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] quickpkg
If I'm understanding it correctly, FEATURES=buildpkg sounds less reliable for failed upgrade recovery. If you want to roll back to a previous version of a package, you're going to end up with what was originally installed, not what was working on your system right before the upgrade, right? Wrong. buildpkg builds a binary package for each package before installing it, so you have the current version and all previous versions, since you enabled buildpkg, in PKGDIR. It means you can rol back as far as you like. Ok, I was thinking it wouldn't take into account changes you make since it was installed, but the only changes should be in /etc/ and those would be preserved. I see buildpkg and quickpkg both utilize $PKGDIR. Very nice. - Grant Neil Bothwick -- gentoo-user@gentoo.org mailing list
[gentoo-user] [ot] Happy Easter
If you celebrate it, Happy Easter! I wish you all a happy and semi-productive holiday. :) Thanks again for everyone's help with everything. Ian begin:vcard fn:Ian K n:K;Ian email;internet:[EMAIL PROTECTED] note;quoted-printable:Pentium 3=0D=0A= 500mHz=0D=0A= 256MB RAM=0D=0A= 80.0GB HDD=0D=0A= ATI Radeon 7000 Evil Wizard 64MB=0D=0A= Computer name: PentaQuad=0D=0A= x-mozilla-html:TRUE version:2.1 end:vcard
Re: [gentoo-user] Local vs. remote startx/Gnome
On Sunday 27 March 2005 09:31, John Myers wrote: On Sunday 27 March 2005 08:35, Mark Knecht wrote: What I actually want to do is start Gnome on the remote box and see the whole Gnome desktop on my local box's second display. I do not want to upset the locally running window manager. Any ideas on how I do that? Here's another idea: I don't have GNOME, so I don't know the command to start it, but try this: local$ Xorg :2 local$ export DISLPAY=:2 local$ ssh -X remote command-to-start-GNOME # _not_ startx -- electronerd pgpzbjE1QBV7G.pgp Description: PGP signature
Re: [gentoo-user] Wireless went kaboom
On Sunday 27 March 2005 03:51 pm, Jason Cooper wrote: I've had great success with: # iwconfig ath0 essid MyESSIDName mode managed channel 6 enc \ 0011-2233-4455-6677-8899-AABB-CC [snip] It looks like the bug is in gentoo's initscripts... Give the command above a try (with your info, of course) and let us know what happens. I ran what you suggested, and iwconfig now returns: IEEE 80211g ESSID: Arachne Nickname: Arachne Mode: Managed Frequency:2.462 GHz Access Point: router mac address Bit Rate . . . etc which is a heck of a lot more than I was getting before - at least the ap is recognized. Where I go from here, though, I have no clue. Oops, forgot that part. Assuming your AP is running a dhcp server, all you should have to do now is: # dhcpcd ath0 Yes! However, I wonder what script has changed. Wireless used to work on boot - I could see it scan and pickup the correct ESSID. Now, net.wlan0 fails, and I must run the commands you've outlined. But, it works, and something is better than nothing. Thanks a lot. -- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Local vs. remote startx/Gnome
On Sunday 27 March 2005 09:31, John Myers wrote: On Sunday 27 March 2005 08:35, Mark Knecht wrote: What I actually want to do is start Gnome on the remote box and see the whole Gnome desktop on my local box's second display. I do not want to upset the locally running window manager. Any ideas on how I do that? Do you run *dm on the remote box? If so, you might want to read up on XDMCP which can do what you want, though I don't know how to ssh-tunnel it (if you want to do that) Sorry for replying to myself ... again... You could also try with Xnest instead of Xorg, which would put it in a window inside your running X session -- electronerd pgphupOCkl0oV.pgp Description: PGP signature
Re: [gentoo-user] Wireless went kaboom
On Mar 27, 2005, at 8:24 pm, Jason Cooper wrote: /etc/init.d/net.wlan0 start: Starting wlan0 Configuring wireless network for wlan0 Couldn't associate with any access points on wlan0 Failed to configure wireless for wlan0 I've recently had the same trouble with gentoo's init scripts, hence, the above command. Have you tried reporting it as a bug? Uberlord is making quite active development on the next generation network configuration at the moment. Stroller. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Wireless went kaboom
On Mar 27, 2005, at 7:41 pm, Ed Jabbour wrote: /etc/conf.d/wireless is unchanged from when it worked, as is /etc/conf.d/net. The symlinks in /etc/init.d are also unchanged.I have baselayout 1.11.10-r4. That's an unstable baselayout isn't it? I don't have a current Gentoo box up right now on which to check, but I think at least it's quite recent. Check out /etc/conf.d/net.example /etc/conf.d/wireless.example if you have them - I think that if you do you might find there are quite a few changes in the way configuration should be made. Stroller. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] [ot] Happy Easter
quoth the Ian K: If you celebrate it, Happy Easter! I wish you all a happy and semi-productive holiday. :) Thanks again for everyone's help with everything. Ian Spent the morning colouring eggs with my kid. First time in probably 20 years or so. The smell of the dye brought back memories immediately. Maybe I'll write a 12 volume set of books now... Happy Easter. -- darren kirby :: Part of the problem since 1976 :: http://badcomputer.org ...the number of UNIX installations has grown to 10, with more expected... - Dennis Ritchie and Ken Thompson, June 1972 pgpjRzxDygelM.pgp Description: PGP signature
Re: [gentoo-user] Problem With Tulip Module
Jerry McBride wrote: On Sunday 27 March 2005 05:04 am, Kathy Wills wrote: ---big snip--- Kernel version is 2.6.11-r4. I'm using the tulip module that I have always used. From kernel .config: # Tulip family network device support # CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_TULIP=m CONFIG_TULIP_MWI=y CONFIG_TULIP_MMIO=y CONFIG_TULIP_NAPI=y CONFIG_TULIP_NAPI_HW_MITIGATION=y CONFIG_DE4X5=m CONFIG_WINBOND_840=m CONFIG_DM9102=m Did some googling and it seems that the error message can be ignored, unless of course it's giving you operational problems. From what I have read, it appears to be a hardware mix problem involving dma issues. Over here I run MSI, SOYOTEC and ABIT motherboards and as I mentioned in my previous email, no such error message has turned up in either messages or dmesg output. Try pulling the linksys card, clean the edge and slap in back into the motherboard in a different slot. Didn't solve the issue. I guess as soon as I can, I'll have to get a different motherboard in order to solve this. Either that or a different network card. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Local vs. remote startx/Gnome
On Sun, 27 Mar 2005 14:25:59 -0800, John Myers [EMAIL PROTECTED] wrote: On Sunday 27 March 2005 09:31, John Myers wrote: On Sunday 27 March 2005 08:35, Mark Knecht wrote: What I actually want to do is start Gnome on the remote box and see the whole Gnome desktop on my local box's second display. I do not want to upset the locally running window manager. Any ideas on how I do that? Here's another idea: I don't have GNOME, so I don't know the command to start it, but try this: local$ Xorg :2 local$ export DISLPAY=:2 local$ ssh -X remote command-to-start-GNOME # _not_ startx Hi, This seems to be getting closer. At least both sides keep trying. OK, I seemed to get the closest to successy by doing this. (Dragonfly is a local machine on my network.) [EMAIL PROTECTED] mark]$ xhost +Dragonfly Dragonfly being added to access control list [EMAIL PROTECTED] mark]$ export DISPLAY=:2 [EMAIL PROTECTED] mark]$ ssh -X dragonfly /usr/bin/gnome-session [EMAIL PROTECTED]'s password: Warning: No xauth data; using fake authentication data for X11 forwarding. Xlib: connection to localhost:10.0 refused by server Xlib: Invalid MIT-MAGIC-COOKIE-1 key (gnome-session:9576): Gtk-WARNING **: cannot open display: [EMAIL PROTECTED] mark]$ Is this possibly because I don't have specific ports open? Not sure about the Xnest suggestion as this is a network of both Gentoo and FC2 machines and my FC2 machines do not seem to have Xnest. Thanks for your ideas! Cheers, Mark -- gentoo-user@gentoo.org mailing list
[gentoo-user] What an average gentoo user does over 6mnth period
Being a new user, I'm wanting to get an overview of what an average gentoo user might do or need to do over a 6mnth period. I installed 3 days ago and am still getting things setup. Seems like an awfull lot of time has gone into emerging stuff I wanted installed. Now it turns out there is an update to portage and my system is telling me it needs to update portage and then update the already installed packages. 2 more huge chunks of time lost to compiling. An activity that seems so intensive that I have been reluctant to and doubted the advisability of installing or making configs during the compile process. So far I've spent a very lot of time waiting for something to finish emerging. It seems like things like Mozilla take an extrordinary long time. I'm wondering what a user might see over 6 mnths. How many portage updates in that amount of time. Howmany `update worlds'. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Lame fonts in xorg (bitmap-fonts ?)
I did notice this in the emerge's output: ^[[32;01m*^[[0m Creating fonts.scale files... ... /usr/portage/x11-base/xorg-x11/xorg-x11-6.8.2-r1.ebuild: line 1815: 16852 Segmentation fault LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir) ${ROOT}/usr/bin/ttmkfdir -x 2 -e emerge --oneshot ttmkfdir; and try xorg again. I've re-emerged ttmkfdir and then xorg-x11 with the same segfault at the end of the xorg emerge and the same fonts in Firefox. What else can I try? - Grant -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Wireless went kaboom
Jason Cooper ([EMAIL PROTECTED]) scribbled: Stroller ([EMAIL PROTECTED]) scribbled: On Mar 27, 2005, at 8:24 pm, Jason Cooper wrote: /etc/init.d/net.wlan0 start: Starting wlan0 Configuring wireless network for wlan0 Couldn't associate with any access points on wlan0 Failed to configure wireless for wlan0 I've recently had the same trouble with gentoo's init scripts, hence, the above command. Have you tried reporting it as a bug? Uberlord is making quite active development on the next generation network configuration at the moment. shame :( I'll admit, I had thought about it as I wrote it. When I encountered the problem last night, I thought it was just an out-lier. I run into that *alot* because I can't leave well enough alone :) However, it would appear my case is not an out-lier. I'll check bugzilla to see if anyone else has reported it... http://bugs.gentoo.org/show_bug.cgi?id=86904 Couldn't find anything similar, so I started a new one. Cooper. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] xfmedia Segmentation fault
Make sure you have the D-BUS daemon running: # emerge sys-apps/dbus # /etc/init.d/dbus start See if that helps. Hi Peter, I don't have dbus running (although it is installed), but I am going to stick with 2.6.11. The only problem I've found with it is my touchpad doesn't register small movements. It's really annoying actually. But should I add dbus to the default runlevel anyway? - Grant emerging the latest synaptics package and changing the mouse driver in xorg.conf to synaptics fixed this. My touchpad is an Alps and there are some important settings for xorg.conf in README.alps.gz. - Grant -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] What an average gentoo user does over 6mnth period
Harry Putnam ([EMAIL PROTECTED]) scribbled: Being a new user, I'm wanting to get an overview of what an average gentoo user might do or need to do over a 6mnth period. I installed 3 days ago and am still getting things setup. Seems like an awfull lot of time has gone into emerging stuff I wanted installed. Now it turns out there is an update to portage and my system is telling me it needs to update portage and then update the already installed packages. 2 more huge chunks of time lost to compiling. An activity that seems so intensive that I have been reluctant to and doubted the advisability of installing or making configs during the compile process. So far I've spent a very lot of time waiting for something to finish emerging. It seems like things like Mozilla take an extrordinary long time. I'm wondering what a user might see over 6 mnths. How many portage updates in that amount of time. Howmany `update worlds'. Of the 5 machines I have running gentoo, I would say on average I run 'emerge -uDav world' from every other day to once a week. However, I sure don't sit around and watch it. Typically, I'll launch the emerge, then start reading email, news, etc, and writing code, etc while it works in the background on the same machine. I've never had an emerge stop me from getting work done. Hell, a lot of times I completely forget my CPU is pegged out running a merge, till I flip over to that desktop to look at something, then I see compiler messages flying by... Basically, it doesn't affect the UI at all. hth, Cooper. -- gentoo-user@gentoo.org mailing list
[gentoo-user] configure: error: C compiler cannot create executables help!
I've been reading up on this problem at http://forums.gentoo.org/viewtopic-t-27486-postdays-0-postorder-asc-start-0.html and bugs.gentoo.org, but I've not yet been successful fixing my gcc woes. I believe this began after a portage update. perhaps useful, maybe not [EMAIL PROTECTED] ~ 47]% gcc-config -l [1] i686-pc-linux-gnu-3.3.5 * [2] i686-pc-linux-gnu-3.3.5-hardened [3] i686-pc-linux-gnu-3.3.5-hardenednopie [4] i686-pc-linux-gnu-3.3.5-hardenednossp [5] i686-pc-linux-gnu-3.4.3 [6] i686-pc-linux-gnu-3.4.3-hardened [7] i686-pc-linux-gnu-3.4.3-hardenednopie [8] i686-pc-linux-gnu-3.4.3-hardenednossp [EMAIL PROTECTED] ~ 48]% grep CFLAGS /etc/make.conf CFLAGS=-O2 -march=pentium4 -pipe -fomit-frame-pointer CXXFLAGS=${CFLAGS} I ran fix_libtool_files.sh on 3.4.3, but I still get the error. Any ideas? Thanks, Shaw Calculating world dependencies ...done! emerge (1 of 9) sys-devel/patch-2.5.9 to / md5 src_uri ;-) patch-2.5.9.tar.gz Unpacking source...http://forums.gentoo.org/viewtopic-t-27486-postdays-0-postorder-asc-start-0.html Unpacking patch-2.5.9.tar.gz to /var/tmp/portage/patch-2.5.9/work Source unpacked. configure: WARNING: If you wanted to set the --build type, don't use --host. configure: error: C compiler cannot create executables make: *** No targets specified and no makefile found. Stop. !!! ERROR: sys-devel/patch-2.5.9 failed. !!! Function src_compile, Line 38, Exitcode 2 !!! emake failed -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] What an average gentoo user does over 6mnth period
On Sun, 2005-03-27 at 19:01 -0500, Jason Cooper wrote: Harry Putnam ([EMAIL PROTECTED]) scribbled: Being a new user, I'm wanting to get an overview of what an average gentoo user might do or need to do over a 6mnth period. I installed 3 days ago and am still getting things setup. Seems like an awfull lot of time has gone into emerging stuff I wanted installed. Now it turns out there is an update to portage and my system is telling me it needs to update portage and then update the already installed packages. 2 more huge chunks of time lost to compiling. An activity that seems so intensive that I have been reluctant to and doubted the advisability of installing or making configs during the compile process. So far I've spent a very lot of time waiting for something to finish emerging. It seems like things like Mozilla take an extrordinary long time. I'm wondering what a user might see over 6 mnths. How many portage updates in that amount of time. Howmany `update worlds'. Of the 5 machines I have running gentoo, I would say on average I run 'emerge -uDav world' from every other day to once a week. However, I sure don't sit around and watch it. Typically, I'll launch the emerge, then start reading email, news, etc, and writing code, etc while it works in the background on the same machine. I've never had an emerge stop me from getting work done. Hell, a lot of times I completely forget my CPU is pegged out running a merge, till I flip over to that desktop to look at something, then I see compiler messages flying by... Basically, it doesn't affect the UI at all. Tip for Harry: In /etc/make.conf set: PORTAGE_NICENESS=19 and the emergeing will go into the background and give way to other processes with higher priority. Also you don't need to update just because you can. If, for example, you stick to security updates, you will have far less compiling. However you may also miss something exciting on the leading edge. And yes mozilla takes a while. But if you really want to wait, try openoffice. As Jason says, just let it do the compiling in the background, and get on with using the computer. :-) hth, Cooper. -- gentoo-user@gentoo.org mailing list -- Nick Rout [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: binary server problems (`emerge -gK --deep world`)
Jesse Guardiani wrote: Jesse Guardiani wrote: Hello, I'm getting caught by all kinds of weirdness. It's probably just user error, but it feels like a bug. Can someone take a look at my output? Here it is: [19:[EMAIL PROTECTED]:[/usr/portage/packages/All]# emerge -gK --deep world Fetching binary packages info... Loaded metadata pickle. Location has moved: http://office.wingnet.net/gentoo-packages/ cache miss: 'x' --- cache hit: 'o' o -- DONE! Calculating world dependencies *** Package in world file is not installed: sys-apps/sh-utils *** Package in world file is not installed: sys-apps/fileutils *** Package in world file is not installed: sys-apps/textutils ...done! sys-process/procps-3.2.4-r3 sys-process/daemontools-0.76-r4 sys-process/at-3.1.8-r11 sys-process/vixie-cron-4.1-r4 These are required by '--usepkgonly' -- Terminating. Exit 1 But all of those software packages exist on the binary server: # ls -al /usr/portage/packages/All/procps-3.2.4-r3.tbz2 -rw-r--r-- 1 root root 227892 Mar 25 14:34 /usr/portage/packages/All/procps-3.2.4-r3.tbz2 # ls -al /usr/portage/packages/All/daemontools-0.76-r4.tbz2 -rw-r--r-- 1 root root 73023 Mar 25 14:34 /usr/portage/packages/All/daemontools-0.76-r4.tbz2 # ls -al /usr/portage/packages/All/at-3.1.8-r10.tbz2 -rw-r--r-- 1 root root 71593 Mar 23 19:27 /usr/portage/packages/All/at-3.1.8-r10.tbz2 # ls -al /usr/portage/packages/All/vixie-cron-4.1-r4.tbz2 -rw-r--r-- 1 root root 94559 Mar 25 14:34 /usr/portage/packages/All/vixie-cron-4.1-r4.tbz2 However, these files were probably built on a different server and transfered to the binary server's package dir later. Does anything else have to be done before they're usable by clients? NOTE: fixpackages has been run both on the binary server and on the client. This doesn't look right either, does it? # emerge -g --update --deep world Fetching binary packages info... Loaded metadata pickle. Location has moved: http://office.wingnet.net/gentoo-packages/ cache miss: 'x' --- cache hit: 'o' oo -- DONE! Calculating world dependencies / emerge: there are no ebuilds to satisfy virtual/snmp. !!! Problem with binary net-firewall/fwbuilder-2.0.0 !!! Possibly a DEPEND/*DEPEND problem. !!! Depgraph creation failed. Exit 1 FYI to anyone who has problems with `emerge -gD world`, `emerge -GD world`, `emerge -gDK world`, `emerge -GDK world`, `emerge -gDk world`, emerge -GDk world`, or `emerge -kD world` complaining inexplicably about DEPEND problems (particularly about virtual/snmp): I think it's a bug, and I got tired of trying to fix it without knowing what caused it, so I worked around this issue locally by sharing my /usr/portage/packages and /usr/portage/distfiles directories via NFS on the local LAN and using a slightly modified pye (Pick Your Emerge) script. First, download pye: http://tinyurl.com/6td25 Then modify it like so (causes it to try a binary package emerge for each ebuild it attempts to emerge): # diff -u pye~ pye --- pye~2005-03-26 14:58:56.0 -0500 +++ pye 2005-03-26 15:06:14.0 -0500 @@ -66,7 +66,7 @@ def mergethis(package): Merge given package and return True if successful. -os.system(emerge %s % package) +os.system(emerge -k %s % package) global pkgdict package = package.split(/)[1] vartree = portage.vartree() Exit 1 Then run this command: ./pye -e uD world If your packages and distfiles directories are properly
[gentoo-user] Re: What an average gentoo user does over 6mnth period
Jason Cooper [EMAIL PROTECTED] writes: Typically, I'll launch the emerge, then start reading email, news, etc, and writing code, etc while it works in the background on the same machine. I've never had an emerge stop me from getting work done. With an --update world running are you able to emerge packages you want to install? A lot of what I have to do right now involves installations. I assumed that was not a wise move. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] sys-libs/glibc-2.3.4 b0rkage with segmentation fault
Am Freitag, 25. März 2005 12:01 schrieb Stroller: A bit of searching suggested that dev-perl/Locale-gettext might be responsible for stuff associated with `env LD_LIBRARY_PATH=${D}/$(get_libdir), so I just remerged that am trying again glibc. Any other suggestions whilst I waitr to see if that worked would be very gratefully received, however. hi, did it worked for you? i am having the same problem at the moment. thx a lot! -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: What an average gentoo user does over 6mnth period
Nick Rout [EMAIL PROTECTED] writes: Thanks for the tip.. As Jason says, just let it do the compiling in the background, and get on with using the computer. :-) No, I insist on watching every word go by :). Honestly though, most of what needs doing right now involves using emerge. Once the systemm is tuned up the way I like it will be different. But for now, I end up wanting to use emerge but can't because of these massive chunks of time needed to compile things like mozilla or kde. Not sure I understand why binaries for such things aren't commonly used. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Wireless went kaboom
On Sunday 27 March 2005 05:49 pm, Stroller wrote: On Mar 27, 2005, at 7:41 pm, Ed Jabbour wrote: /etc/conf.d/wireless is unchanged from when it worked, as is /etc/conf.d/net. The symlinks in /etc/init.d are also unchanged.I have baselayout 1.11.10-r4. That's an unstable baselayout isn't it? I don't have a current Gentoo box up right now on which to check, but I think at least it's quite recent. Check out /etc/conf.d/net.example /etc/conf.d/wireless.example if you have them - I think that if you do you might find there are quite a few changes in the way configuration should be made. 1.11.10-r4 is marked ~ - testing. I'll try going back to 1.9.4-r6, marked stable. That's what I was using when everything worked. I'll check the examples first, though. Unfortunately, I do not have access to the laptop right now. Wife's watching a DVD. (I try telling her that the raison d'etre of a machine is fiddling, but she always insists on actually *using* it!!):) -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: What an average gentoo user does over 6mnth period
Harry Putnam ([EMAIL PROTECTED]) scribbled: Jason Cooper [EMAIL PROTECTED] writes: Typically, I'll launch the emerge, then start reading email, news, etc, and writing code, etc while it works in the background on the same machine. I've never had an emerge stop me from getting work done. With an --update world running are you able to emerge packages you want to install? A lot of what I have to do right now involves installations. I assumed that was not a wise move. ehhh, YMMV. :) I've done it, but held my breath while doing it. I assume you are refering to merging two packages simultaneously. The compiling won't interfere with the other, but installation could be interesting if the two packages cross paths in some way. Also, since compiling sucks up 99% of CPU, both packages will take longer. Normally, if my box is doing an '--update world' and I want to compile my code, or merge a new package, I'll CTL-Z the '--update world'. This pauses it until I type 'fg' or 'bg' in the same console (forground and background, respectively). I've never had a paused and resumed merge fail on me, however, I have forgotten to resume a few. The terminal is kind enough to remind you when you try to close it. ;-) hth, Cooper. -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: What an average gentoo user does over 6mnth period
Harry Putnam wrote: different. But for now, I end up wanting to use emerge but can't because of these massive chunks of time needed to compile things like mozilla or kde. Not sure I understand why binaries for such things aren't commonly used. IMHO, use the '-bin' (binary) packages for mozilla, firefox, and openoffice. They are usually available, and work pretty good. On my 1.6GHz PentM, OOo takes about 4-5GB of filespace (tmp) and a day. Not worth it to me. I don't think KDE packages are avail with a binary package. Just because you use Gentoo doesn't mean you can't use binary packages. Some are in portage, and some are not. And yes, the install takes days of tweaking. But look it at as an investment. Unlike other OS's (e.g. Fedora), you'll only need to install Gentoo *once* and still be up2date. About once a week I run: # emerge --sync # emerge -a --update world And go to bed. In the morning it's usually done. -- G a b r i e l M . B e d d i n g f i e l d -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: Re: KDE Emerge problem
Ian K wrote: I know that it was the first ebuild of the emerge process. Upon doing an emege -p kde i get: [ebuild U ] dev-libs/openssl-0.9.7e [0.9.7c-r1] (thats the first ebuild.) Just to be sure, try this: # emerge --oneshot =dev-libs/openssl-0.9.7e Note that OpenSSL is a stable ebuild, so you *shouldn't* be having trouble with it. The errors you posted before look like errors with portage. So if it fails, try this: # emerge --sync emerge portage \ emerge metadata emerge --oneshot =dev-libs/openssl-0.9.7e All on one line. (Note that the 'emerge metadata' might actually be unnecc. -- I'm not sure.) Post your results. HTH! -- G a b r i e l M . B e d d i n g f i e l d -- gentoo-user@gentoo.org mailing list
[gentoo-user] I've tied my OS in a knot
On a recently intstalled 2004.3 from stage2. I just ran an --update portage as emerge was encouraging me to do. Somehow with that and other installations and removal I've done in the last 2 days. I've arrived at sort of catch 22. I'm told some packages are blocking an --update world. When I check it out I see: [blocks B ] x11-base/xorg-x11-6.8.0-r4 (is blocking x11-base/opengl-update-2.1.1-r1) opengl-update is not installed. at least according to qpkg -I. And because when I saw the message I thought I could move on by uninstalling it. But the --update still fails. So, I thought I could just dodge it and update some of the other stuff, but other packages are also being blocked by this situation. As a very new user... I'm not sure what to do about this Any recommendations? -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] I've tied my OS in a knot
I ran into the exact same problem yesterday on my laptop. None of my packages were set to accept ~x86. I tried playing around with /etc/portage/package.keywords and accepting different combinations of ~x86 for the packages and still couldn't resolve the blocking. I ended up unmerging xorg-x11 and other blocking packages (ati-drivers). Then re-emerging xorg-x11 and other packages. This solved all the blocking issues. I suspect the problem was that I hadn't fully updated the world in a few months. Several times I've synced and started an updated but not finished. Only to later sync and start another update. Hopefully manually removing the blocking packages will resolve the issue for you too. --Brandon On a recently intstalled 2004.3 from stage2. I just ran an --update portage as emerge was encouraging me to do. Somehow with that and other installations and removal I've done in the last 2 days. I've arrived at sort of catch 22. I'm told some packages are blocking an --update world. When I check it out I see: [blocks B ] x11-base/xorg-x11-6.8.0-r4 (is blocking x11-base/opengl-update-2.1.1-r1) opengl-update is not installed. at least according to qpkg -I. And because when I saw the message I thought I could move on by uninstalling it. But the --update still fails. So, I thought I could just dodge it and update some of the other stuff, but other packages are also being blocked by this situation. As a very new user... I'm not sure what to do about this Any recommendations? -- gentoo-user@gentoo.org mailing list -- gentoo-user@gentoo.org mailing list
[gentoo-user] Who is ndc38841 why is he getting my mail?
My posts here get posted, but I also have been receiving Delivery Status Notification (Failure) from [EMAIL PROTECTED]: This is an automatically generated Delivery Status Notification. Delivery to the following recipients failed. [EMAIL PROTECTED] with my post attached. Anybody else seeing this? -- -- gentoo-user@gentoo.org mailing list
[gentoo-user] New features in 2005.0?
Great to hear about the new release coming out. As I have a few Gentoo machines which run fine so mainly I am interested in is whats new/changed in this release to get a feel for the progress of Gentoo. I had a look around the site for a Readme or Changelog but there doesn't seem to be much. The only thing I found was the blurb on the store's page (http://store.gentoo.org/product_info.php?cPath=2products_id=49): *2005.0 summary for Linux geeks:* Gentoo Linux 2005.0 now defaults to using kernel 2.6, and uses udev by default. Firefox 1.0.1 is included. [snip] It's got 2.6 and udev. Apart from obviously newer package versions on the CDs which we get to know about when we sync are there any other changes and additions worth a separate mention? -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: I've tied my OS in a knot
Brandon Enright [EMAIL PROTECTED] writes: Hopefully manually removing the blocking packages will resolve the issue for you too. Thanks. I thought about doing that too, but hoped to hear of something less drastic first. These really long compile times makes one want to find some other way. I'm running a p4 2gz but still things seem to take very lng to compile. -- gentoo-user@gentoo.org mailing list
[gentoo-user] Mouse issues
I have a logitech MX500 usb mouse and i'm having a difficult time getting it to work properly, need a little help. left and right mouse buttons work ok but the scroll wheel and other buttons do not work. This is the Core Pointers Input Device Section of my xorg.conf file Section InputDevice # Identifier and driver Identifier Mouse1 Driver mouse Option ProtocolAuto Option Device /dev/usbmouse # Mouse-speed setting for PS/2 mouse. #Option Resolution256 # When using XQUEUE, comment out the above two lines, and uncomment # the following line. #Option Protocol Xqueue # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. #Option BaudRate 9600 #Option SampleRate150 # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) #Option Emulate3Buttons #Option Emulate3Timeout50 # ChordMiddle is an option for some 3-button Logitech mice #Option ChordMiddle EndSection What do I need to change or add here? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Who is ndc38841 why is he getting my mail?
Yup I got that message when I replied a couple of threads of mine! I wonder what's going on as well. On Sun, 27 Mar 2005 21:38:49 -0500, Ed Jabbour [EMAIL PROTECTED] wrote: My posts here get posted, but I also have been receiving Delivery Status Notification (Failure) from [EMAIL PROTECTED]: This is an automatically generated Delivery Status Notification. Delivery to the following recipients failed. [EMAIL PROTECTED] with my post attached. Anybody else seeing this? -- -- gentoo-user@gentoo.org mailing list -- |--- | Mrugesh Karnik | Registered Linux User #375243 |--- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Who is ndc38841 why is he getting my mail?
I'd say its pretty clear. Some f*wit has cancelled his email account but left himself subscribed. when his list mail bounces it comes back to the sender - you (or me for this message). On Mon, 2005-03-28 at 08:54 +0530, Mrugesh Karnik wrote: Yup I got that message when I replied a couple of threads of mine! I wonder what's going on as well. On Sun, 27 Mar 2005 21:38:49 -0500, Ed Jabbour [EMAIL PROTECTED] wrote: My posts here get posted, but I also have been receiving Delivery Status Notification (Failure) from [EMAIL PROTECTED]: This is an automatically generated Delivery Status Notification. Delivery to the following recipients failed. [EMAIL PROTECTED] with my post attached. Anybody else seeing this? -- -- gentoo-user@gentoo.org mailing list -- Nick Rout [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] New features in 2005.0?
The stageballs no longer have the problem with /var/db. If you know what that means, you'll know why it's important. Eugene Rosenzweig wrote: Great to hear about the new release coming out. As I have a few Gentoo machines which run fine so mainly I am interested in is whats new/changed in this release to get a feel for the progress of Gentoo. I had a look around the site for a Readme or Changelog but there doesn't seem to be much. The only thing I found was the blurb on the store's page (http://store.gentoo.org/product_info.php?cPath=2products_id=49): *2005.0 summary for Linux geeks:* Gentoo Linux 2005.0 now defaults to using kernel 2.6, and uses udev by default. Firefox 1.0.1 is included. [snip] It's got 2.6 and udev. Apart from obviously newer package versions on the CDs which we get to know about when we sync are there any other changes and additions worth a separate mention? -- gentoo-user@gentoo.org mailing list -- GPG key UID: 0xCED35690 GPG key fingerprint: 1243 C87E 521C 3A0A 3121 C4D6 5A10 AABE CED3 5690 signature.asc Description: OpenPGP digital signature
Re: [gentoo-user] Who is ndc38841 why is he getting my mail?
On Mon, 2005-03-28 at 15:48 +1200, Nick Rout wrote: I'd say its pretty clear. Some f*wit has cancelled his email account but left himself subscribed. or possibly his mailbox is full. either way someone should remove him from the list. when his list mail bounces it comes back to the sender - you (or me for this message). -- Nick Rout [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] I've tied my OS in a knot
On Sun, 2005-03-27 at 20:10 -0600, Harry Putnam wrote: On a recently intstalled 2004.3 from stage2. I just ran an --update portage as emerge was encouraging me to do. Somehow with that and other installations and removal I've done in the last 2 days. I've arrived at sort of catch 22. I'm told some packages are blocking an --update world. When I check it out I see: [blocks B ] x11-base/xorg-x11-6.8.0-r4 (is blocking x11-base/opengl-update-2.1.1-r1) Hey Harry, what command are you running when you get that message? What version of xorg-x11 do you have at present? It seems the answer may be this: Simply emerge xorg-x11-6.8.0-r4 without the update flag, ie emerge xorg-x11 should do it. Then do the update thing. opengl-update is not installed. at least according to qpkg -I. And because when I saw the message I thought I could move on by uninstalling it. But the --update still fails. So, I thought I could just dodge it and update some of the other stuff, but other packages are also being blocked by this situation. As a very new user... I'm not sure what to do about this Any recommendations? -- gentoo-user@gentoo.org mailing list -- Nick Rout [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
[gentoo-user] Scanner and permissions.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello gentooers. I have a Plustek Parallel Port scanner working (using parport0), but only as root, how do I get it to work for normal users ? I've read that I should tweak some permissions, but I'm not sure which ones. - -- Pupeno: [EMAIL PROTECTED] - http://pupeno.com Reading Science Fiction ? http://sfreaders.com.ar -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFCR4k9fW48a9PWGkURAmOSAJ91andM7eYyhQZNkLsM+bvlyy8dvwCfa5d/ EsmjUG2cRI6uskThVGztN5M= =4owY -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Scanner and permissions.
Locate the device that is being used as the scanner device. look at its permissions and ownership. make sure you are looking at the device, not a symlink to it. the standard approach is to give a group (eg scanner group) permissions to the device, then add allowed users ot that group. On Mon, 2005-03-28 at 01:34 -0300, Pupeno wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello gentooers. I have a Plustek Parallel Port scanner working (using parport0), but only as root, how do I get it to work for normal users ? I've read that I should tweak some permissions, but I'm not sure which ones. - -- Pupeno: [EMAIL PROTECTED] - http://pupeno.com Reading Science Fiction ? http://sfreaders.com.ar -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFCR4k9fW48a9PWGkURAmOSAJ91andM7eYyhQZNkLsM+bvlyy8dvwCfa5d/ EsmjUG2cRI6uskThVGztN5M= =4owY -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list -- Nick Rout [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
[gentoo-user] Mouse issue
I have a logitech MX500 usb mouse and i'm having a difficult time getting it to work properly, need a little help. left and right mouse buttons work ok but the scroll wheel and other buttons do not work. This is the Core Pointers Input Device Section of my xorg.conf file Section InputDevice # Identifier and driver Identifier Mouse1 Driver mouse Option ProtocolAuto Option Device /dev/usbmouse # Mouse-speed setting for PS/2 mouse. #Option Resolution256 # When using XQUEUE, comment out the above two lines, and uncomment # the following line. #Option Protocol Xqueue # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. #Option BaudRate 9600 #Option SampleRate150 # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) #Option Emulate3Buttons #Option Emulate3Timeout50 # ChordMiddle is an option for some 3-button Logitech mice #Option ChordMiddle EndSection What do I need to change or add here? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] What an average gentoo user does over 6mnth period
050327 Harry Putnam wrote: Being a new user, I'm wanting to get an overview of what an average gentooer might do or need to do over a 6mnth period. it will take a few weeks to get your system how you want it, but once you've done that, you never need to re-install. one of the beauties of Gentoo is that you have full control over how close you want to be to the bleeding edge or utterly reliable: what you update when you do it is entirely upto you. i never -- as in never -- do 'emerge world' except with '-Dup' (below). i made a list of all the pkgs i have installed with 'qpkg -I', to which i've added dates of installation a few notes: 1st few lines: 041031 app-admin/fam-2.7.0-r2 [for kdelibs] W 040425 app-admin/gkrellm-2.1.28-r1 [invoke 'gkrellm2'] W 040314 app-admin/sysklogd-1.4.1-r10 [was system: PP logger] S 050226 app-arch/bzip2-1.0.2-r5 041031 app-arch/cabextract-1.1 [for xfree] S 050205 app-arch/cpio-2.6-r1 S 050108 app-arch/gzip-1.3.5-r5 041009 app-arch/ncompress-4.2.4-r1 [for tar: qpkg ~th] 'S' is system, 'W' is world ' ' is a pkg installed to support another. every weekend, i do 'esync', which updates the Portage tree in my machine, updates the 'esearch' database lists all pkgs which have changed, hiliting in color those which i have installed (you need to emerge the pkg 'esearch' to get 'esync'). then i do 'emerge -Dup world' to get another view of what to update, decide which pkgs to actually update, testing with 'emerge -pv pkg'. i edit my list of installed pkgs as i do the emerges. a rule of thumb is to update if you've seen a security alert -- tho' some may not affect your machine, eg a local exploit on a single-user desktop -- or if the 1st or 2nd numbers in the pkg name have gone up. but it's all upto you that's part of the beauty of Gentoo ... (smile) -- ,, SUPPORT ___//___, Philip Webb : [EMAIL PROTECTED] ELECTRIC /] [] [] [] [] []| Centre for Urban Community Studies TRANSIT`-O--O---' University of Toronto -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Mouse issue
Hi, On 27/Mar/05, Tim Brown wrote: I have a logitech MX500 usb mouse and i'm having a difficult time getting it to work properly, need a little help. left and right mouse buttons work ok but the scroll wheel and other buttons do not work. This is the Core Pointers Input Device Section of my xorg.conf file Section InputDevice # Identifier and driver Identifier Mouse1 Driver mouse Option ProtocolAuto Option Device /dev/usbmouse # Mouse-speed setting for PS/2 mouse. #Option Resolution256 # When using XQUEUE, comment out the above two lines, and uncomment # the following line. #Option Protocol Xqueue # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. #Option BaudRate 9600 #Option SampleRate150 # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) #Option Emulate3Buttons #Option Emulate3Timeout50 # ChordMiddle is an option for some 3-button Logitech mice #Option ChordMiddle EndSection What do I need to change or add here? The following is my InputDevice section Section InputDevice Identifier Mouse0 Driver mouse Option Protocol ImPS/2 Option Device /dev/input/mice Option Buttons 5 Option ZAxisMapping 4 5 EndSection Notice the 'Buttons' and 'ZAxisMapping' lines Cheers, Zarick Lau -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Scanner and permissions.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Je Lundo Marto 28 2005 01:41, Nick Rout skribis: Locate the device that is being used as the scanner device. I can handle the rest, how do I do this ? lsof only shows /dev/pts/[0-3] being used, but those files are already owned by the user and readable/writable, so, they aren't the problem. :( - -- Pupeno: [EMAIL PROTECTED] - http://pupeno.com Reading Science Fiction ? http://sfreaders.com.ar -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFCR5iwfW48a9PWGkURAvfNAKCLXwskpIL6B+3cWyfudT0lQvNbogCfb15J b8bpTOOQGKzTCBkiS2wM0HI= =QNZG -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
[gentoo-user] Ssh DSA/RSA log in
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I'm trying to set up a passwordless log in, using ssh and dsa or rsa keys. For that, I first try to make it work for localhost. So, I do the following steps: [EMAIL PROTECTED] sandra $ cd .ssh Generate a dsa and rsa keys (just in case): [EMAIL PROTECTED] .ssh $ ssh-keygen -t dsa Generating public/private dsa key pair. Enter file in which to save the key (/home/sandra/.ssh/id_dsa): Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /home/sandra/.ssh/id_dsa. Your public key has been saved in /home/sandra/.ssh/id_dsa.pub. The key fingerprint is: bd:7c:9d:d2:7a:c9:e5:df:13:15:69:32:94:e0:bd:29 [EMAIL PROTECTED] [EMAIL PROTECTED] .ssh $ ssh-keygen -t rsa Generating public/private rsa key pair. Enter file in which to save the key (/home/sandra/.ssh/id_rsa): Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /home/sandra/.ssh/id_rsa. Your public key has been saved in /home/sandra/.ssh/id_rsa.pub. The key fingerprint is: e5:72:8b:4c:a2:fb:88:b1:a1:ee:e0:99:0f:9b:1b:27 [EMAIL PROTECTED] [EMAIL PROTECTED] .ssh $ ls id_dsa id_dsa.pub id_rsa id_rsa.pub known_hosts Make them authorized keys: [EMAIL PROTECTED] .ssh $ cat id_dsa.pub id_rsa.pub authorized_keys Try to log in to [EMAIL PROTECTED] (liv is localhost): $ ssh [EMAIL PROTECTED] Password: As you can see, it asks me for a password (instead of asking me for a passphrase for the key). It simple doesn't work. This is done with an out of the box openssh configuration (from Gentoo, of course). To gether more information I can run ssh -vv [EMAIL PROTECTED], getting the following: [EMAIL PROTECTED] .ssh $ ssh -vv [EMAIL PROTECTED] OpenSSH_3.9p1, OpenSSL 0.9.7e 25 Oct 2004 debug1: Reading configuration data /etc/ssh/ssh_config debug2: ssh_connect: needpriv 0 debug1: Connecting to liv [10.0.0.2] port 22. debug1: Connection established. debug1: identity file /home/sandra/.ssh/identity type -1 debug2: key_type_from_name: unknown key type '-BEGIN' debug2: key_type_from_name: unknown key type 'Proc-Type:' debug2: key_type_from_name: unknown key type 'DEK-Info:' debug2: key_type_from_name: unknown key type '-END' debug1: identity file /home/sandra/.ssh/id_rsa type 1 debug2: key_type_from_name: unknown key type '-BEGIN' debug2: key_type_from_name: unknown key type 'Proc-Type:' debug2: key_type_from_name: unknown key type 'DEK-Info:' debug2: key_type_from_name: unknown key type '-END' debug1: identity file /home/sandra/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_3.9p1 debug1: match: OpenSSH_3.9p1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_3.9p1 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[EMAIL PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[EMAIL PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[EMAIL PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[EMAIL PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_init: found hmac-md5 debug1: kex: server-client aes128-cbc hmac-md5 none debug2: mac_init: found hmac-md5 debug1: kex: client-server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(102410248192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2:
Re: [gentoo-user] Ssh DSA/RSA log in
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Pupeno wrote: I'm trying to set up a passwordless log in, using ssh and dsa or rsa keys. For that, I first try to make it work for localhost. So, I do the following steps: [EMAIL PROTECTED] sandra $ cd .ssh Generate a dsa and rsa keys (just in case): [EMAIL PROTECTED] .ssh $ ssh-keygen -t dsa Generating public/private dsa key pair. Enter file in which to save the key (/home/sandra/.ssh/id_dsa): Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /home/sandra/.ssh/id_dsa. Your public key has been saved in /home/sandra/.ssh/id_dsa.pub. The key fingerprint is: bd:7c:9d:d2:7a:c9:e5:df:13:15:69:32:94:e0:bd:29 [EMAIL PROTECTED] [EMAIL PROTECTED] .ssh $ ssh-keygen -t rsa Generating public/private rsa key pair. Enter file in which to save the key (/home/sandra/.ssh/id_rsa): Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /home/sandra/.ssh/id_rsa. Your public key has been saved in /home/sandra/.ssh/id_rsa.pub. The key fingerprint is: e5:72:8b:4c:a2:fb:88:b1:a1:ee:e0:99:0f:9b:1b:27 [EMAIL PROTECTED] [EMAIL PROTECTED] .ssh $ ls id_dsa id_dsa.pub id_rsa id_rsa.pub known_hosts Make them authorized keys: [EMAIL PROTECTED] .ssh $ cat id_dsa.pub id_rsa.pub authorized_keys Try to log in to [EMAIL PROTECTED] (liv is localhost): $ ssh [EMAIL PROTECTED] Password: Any help will be very appretiated. Thank you. To sum up what you did: You created the dsa-key as user sandra and copied the public key to sandra's authorized_keys. Now Sandra can ssh from her account to her account on the same machine without a password. What you have to do for passwordless log in, which is rather insecure: Create a dsa- or rsa-key for the user you want to open the ssh connection from, probably your account. Copy the public key to the file ~/.ssh/authorized_keys on the machine and account you want to log in. HTH - -- Dirk Raeder I prefer encrypted and signed messages. My GPG key is available at hkp://blackhole.pca.dfn.de with ID 0x05EB5446 Registered Linux user #378554 http://counter.li.org -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFCR6Vu2QYJ1wXrVEYRAgmQAKC52CXI+G1oG1wFAfc7pF+BDn/GKACgi9y5 Zv1XpjDexoKAsYvcWUXM58o= =1fOv -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list