[gentoo-user] xorg-7: no console switching; can't exit gnome sanely.
I have just upgraded to xorg-7 and found that I can no longer use ctrl-alt-Fn to switch out of the x server. I am using the same version of fglrx that I was before I upgraded and this problem started happening. How do I get console-switching back? I have also found, since the upgrade, that I can no longer exit gnome sanely. The first time I did it I got a kernel panic; the second time I found myself back at a garbled login screen; and the remaining 3 times I have simply found myself with a black screen and an unresponsive mouse and keyboard. I can however, still exit kde and blackbox without problem. The garbled login screen was one I have seen before when I tried to start a second xsession from within a kde session. It looked a bit like what you get when you set a video card to a resolution your monitor can't handle, with a mess of broken horizontal lines across the screen at about the height the login window ought to be. I am still using kdm as my session manager, if that makes any difference (it didn't in the past). Any ideas what could be happening with my gnome sessions? Thanks Robert -- Robert Persson Conspiracy Bears: Once upon a time there were lots of conspiracy bears... -- gentoo-user@gentoo.org mailing list
[gentoo-user] qmail troubles
I'm trying to setup a qmail sever via the documention found at gentoo.org. I have used these instructions before and all went ok, however now I'm having problems. Everything is starting fine, but when a user tries to auth I get their clients are telling them the server quit and the following is being logged in /var/log/messages Code: Mar 3 22:24:35 zues pop3d-ssl: LOGIN FAILED, user=[EMAIL PROTECTED], ip=[XXX.XXX.XXX.XXX] Mar 3 22:24:35 zues pop3d-ssl: authentication error: No such file or directory for the life of me I can't figure out where the problem is. courier-imap is being built with vchkpw the authdaemonrc config file is setup correctly (at least according to the documentation).. what else could be the problem?
Re: [gentoo-user] Gentoo on Mac Mini Intel
HI Rick, > Yes, Gentoo should run on it. > Use the plain x86 installer. that's good news :) . > The only problem might be the new type of bios that is in the intel > mac series, I'm not sure how well it is supported by linux. > > I haven't seen any positive or negative messages about running linux > on an intel mac so can't help you there. I even wonder if all interfaces (USB, firewire, graphics) will work on the box. > And dual booting should be possible, it was always possible with the > old apples. I hope Apple didn't do some magic to prevent installation of other OSes like Mac OS X. Anyway, I guess I will give it a try. Thanks & best regards ce -- gentoo-user@gentoo.org mailing list
[gentoo-user] OT? - resizing a windows partition to take up more space (and take from gentoo :-()
Hi, I have the following partition table /dev/hdb6 9004120 8780172223948 98% / udev452040 108451932 1% /dev /dev/hdb8 8803312 8388844414468 96% /usr /dev/hdb1 12289692 11802356487336 97% /winsux /dev/hdb2 10080520 7198664 2369788 76% /mnt/ubuntu /dev/hdb7 39068848 37834076 1234772 97% /mnt/b40 none452040 0452040 0% /dev/shm Basically, I want to give my ntfs windows winsux partition half the disk (.net2 is so enormous I have no space for anything else...). I have an 250gig external usb hd that I am formatting in ext3 (and it looks like it will take several hours!) that can be used for transfer. I would like to create images of both windows and gentoo and then restore afterwards - basically only / and /usr need to be imaged (I guess I could just copy them, and may end up doing that...) but I am pretty sure a straight copy of windows won't work. What I *might* try is to copy linux to the server or external hd and then simply resize the ntfs partition with ntfsresize. I have had success resizing ntfs with rescuecd so might go that route. Anyone got any suggestions on the best approach? dd? cp + ntfsresize? Cheers Antoine -- gentoo-user@gentoo.org mailing list
[gentoo-user] qmail troubles
I'm trying to setup a qmail sever via the documention found at gentoo.org. I have used these instructions before and all went ok, however now I'm having problems. Everything is starting fine, but when a user tries to auth I get their clients are telling them the server quit and the following is being logged in /var/log/messages Code: Mar 3 22:24:35 zues pop3d-ssl: LOGIN FAILED, [EMAIL PROTECTED], ip=[XXX.XXX.XXX.XXX] Mar 3 22:24:35 zues pop3d-ssl: authentication error: No such file or directory for the life of me I can't figure out where the problem is. courier-imap is being built with vchkpw the authdaemonrc config file is setup correctly (at least according to the documentation).. what else could be the problem? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Gentoo on Mac Mini Intel
And dual booting should be possible, it was always possible with the old apples. I hope Apple didn't do some magic to prevent installation of other OSes like Mac OS X. Anyway, I guess I will give it a try. I believe the idea was that you can do just that - dual boot with whatever you want for x86. The inverse - installing intel osx on a non-mac machine is not going to be possible (or at least probably not legal). Cheers Antoine -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] xorg-7: no console switching; can't exit gnome sanely.
On Sat, Mar 04, 2006 at 12:24:07AM -0800, Penguin Lover Robert Persson squawked: > I have just upgraded to xorg-7 and found that I can no longer use ctrl-alt-Fn > to switch out of the x server. I am using the same version of fglrx that I > was before I upgraded and this problem started happening. How do I get > console-switching back? > Option "DontVTSwitch" "Off" in the xorg.conf W -- I know that there are people in this world who do not love their fellow man, and I HATE people like that. -- Tom Lehrer Sortir en Pantoufles: up 112 days, 2:57 -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Gentoo on Mac Mini Intel
Hi Antoine, > I believe the idea was that you can do just that - dual boot with > whatever you want for x86. I guess it depends on GRUB and if it can install so it is found by the Mac Mini BIOS. > The inverse - installing intel osx on a > non-mac machine is not going to be possible (or at least probably not > legal). I didn't read the Mac OS X license, but as I'm not interested to install it on any other machine, I don't care. I want to install Linux on the MAC Mini, but if possible I'd like to keep OS X as well on it. Thanks for the thoughts & best regards ce -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Gentoo on Mac Mini Intel
Christoph Eckert wrote: Hi all, I'm interested in buying an Intel Mac Mini. Qestions: * Will Gentoo run on it? Sooner or later I am sure it will :) * If so: Which installer is the right one (sorry I'm not that familiar with processor hardware)? there are no ready-made yet I dont think * Can it dual boot with the installed Mac OS? yes. Thanks & best regards ce These guys have been working on running linux on new Macs: http://www.mactel-linux.org/wiki/Main_Page They started off by running gentoo, as this pic shows: http://www.mactel-linux.org/wiki/Image:Gentoo2.jpg They got a HOWTO going: http://www.mactel-linux.org/wiki/HOWTO They have a livecd but it is a Ubuntu one: http://sourceforge.net/project/showfiles.php?group_id=160126 So they have kernel patches, they can boot and they got a dual-boot guide. Thats enough to install gentoo on your x86 mac I think. With a bit of hacking. I am sure sooner or later there will be a ready-made installer CD for it too. Eugene. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] test
good test -- /** * Love in Gentoo-Linux C and Python * Look at my website and my blog * http://www.jnlinux.org * http://bbs.jnlinux.org **/ -- gentoo-user@gentoo.org mailing list
[gentoo-user] splash screen on bootup
i had installed gentoo without splash screen on boot up (ie., bootsplash) how can i configure now-- C.S.Prakash
Re: [gentoo-user] splash screen on bootup
c.s.prakash wrote: > i had installed gentoo without splash screen on boot up (ie., bootsplash) > how can i configure now > Hi Prakash, Gentoo developers have discontinued the support fo bootsplash, i.e., the gentoo kernel sources do not contain bootsplash patches. You've to use fbsplash (splashutils) instead.. Check out : http://gentoo-wiki.com/HOWTO_fbsplash Also note that you can emerge boolsplash-themes, they'll get automatically get converted to splashutils themes.. Bye, -- Linux Kernel : 2.6.15-gentoo-r7 GCC version : 4.0.2 (Gentoo 4.0.2-r3, pie-8.7.8) Processor : AMD Athlon XP 2600+ RAM : 1 GB DDR 333 SDRAM CFLAGS USED : -march=athlon-xp -O3 -m3dnow -msse -mmmx -pipe -fomit-frame-pointer -momit-leaf-frame-pointer -ftracer -fno-crossjumping -falign-functions=16 -falign-loops=16 -falign-jumps=16 -fno-align-labels -mfpmath=387,sse -maccumulate-outgoing-args CXXFLAGS USED : $(CFLAGS) -fvisibility-inlines-hidden pgp8nRSY23vIr.pgp Description: PGP signature
Re: [gentoo-user] splash screen on bootup
> i had installed gentoo without splash screen on boot up (ie., > bootsplash) how can i configure now search for gensplash. Best regards ce -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] learn to SNIP (was: glibc does not emerge)
Cláudio Henrique wrote: > thanks for the response. I have taken out -fPIC and now it > emerges. > > On 3/3/06, Masood Ahmed <[EMAIL PROTECTED]> wrote: > > On 05:59 Fri 03 Mar, Cl?udio Henrique wrote: > > > hi, there, [snip, snip, snipsnipSNIP] Please, guys, learn to snip. And to bottom post. http://www.netmeister.org/news/learn2quote2.html Benno -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] splash screen on bootup
Have a look at these HOWTOs http://gentoo-wiki.com/HOWTO_fbsplash http://gentoo-wiki.com/HOWTO_Splash_image_in_GRUB Cheers Uwe c.s.prakash wrote: i had installed gentoo without splash screen on boot up (ie., bootsplash) how can i configure now -- C.S.Prakash begin:vcard fn:Uwe Klosa n:Klosa;Uwe org:Uppsala University;Electronic Publishing Centre adr:;;;Uppsala;;75120;Sweden email;internet:[EMAIL PROTECTED] tel;work:+46 (0)18 471 7658 url:http://publications.uu.se/epcentre version:2.1 end:vcard
Re: [gentoo-user] splash screen on bootup
On 04 March 2006 15:25, c.s.prakash wrote: > i had installed gentoo without splash screen on boot up (ie., bootsplash) > how can i configure now Don't use bootsplash; that's obsolete. Instead, use just "splash". Emerge splash and whatever theme you want. Emerge, if you haven't done so, genkernel. Use genkernel to create an initrd (actually, initramfs) for you even if you haven't used genernel for compiling the kernel: genkernel --gensplash=your_theme --gensplash-res=1024x768 initrd Replace "your_theme" and "1024x768" with your preferred settings. Add "--menuconfig" to the option if you want to look up your kernel configuration again, but if you change it you must also compile a new kernel. Inside the kernel, you need support for the framebuffer and for splash. Assuming you are using grub as a boot loader, you need an entry in grub.conf like this: title= NOS - The Namibian Office Solution by SysEx (Pty) Ltd. root (hd0,1) kernel /boot/kernel-genkernel-x86-2.6.12-gentoo-r6 root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/hda2 quiet udev CONSOLE=/dev/tty1 video=vesafb:ywrap,[EMAIL PROTECTED] splash=silent,theme:sysex initrd /boot/initramfs-genkernel-x86-2.6.12-gentoo-r6 Obviously, you have to adjust devices, kernel version, initrd version, theme and resolution to your liking. Voila! Uwe -- Why do consumers keep buying products they will live to curse? -- gentoo-user@gentoo.org mailing list
[gentoo-user] Nvidia hangs Xorg
Hi there, my problem of the freezing x-screen with the proprietary nvidia-drivers and firefox is solved for the moment. I've just disabled the drivers agp-support by setting the option nvagp to zero in xorg.conf. For me, it made no difference whether to use nvagp or agpgart, both leads in a hung-up. Thanks for your ideas. Jonatan -- gentoo-user@gentoo.org mailing list
[gentoo-user] modules built post kernel install (on the fly)
Is this possible: Compile a module by itself (not during kernel compile) and insert that module into a running kernel. I'm pretty sure this is possible but have no idea how to do it. Pawing thru google. `site:gentoo.org modules "on the fly" ' and similar strings even just `kernel module' Turns up scads of stuff but none of it is hitting this head on.. or I didn't paw far enough so asking here for pointers to documentation that will cover this. -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: Nvidia hangs Xorg
On Sat, 04 Mar 2006 15:19:57 +0100, Jonatan Antoni wrote: > Hi there, > > my problem of the freezing x-screen with the proprietary nvidia-drivers > and firefox is solved for the moment. I've just disabled the drivers > agp-support by setting the option nvagp to zero in xorg.conf. > For me, it made no difference whether to use nvagp or agpgart, both leads > in a hung-up. > > Thanks for your ideas. > Jonatan I had a 5200 card and two monitors and have never had this trouble -- either when using twinview or dual head modes. Here's an experiment. unmerge nvidia-glx and nvidia-kernel and try installing the nvidia drivers directly using their compile settings and installation routines. Next, check your xorg.conf file again. Another poster suggested correctly that you should have Load "dbe" as well as Load "extmod" (see the sample configuration file included with the source. Next, check how the agpgart module is loaded. Is it built into the kernel? Is it a module? Is modprobe agpgart being run? It must be a module if you are going to use the NVAGP option. Without agpgart loaded, nvidia drivers might bonk.0 More than likely, unless there is a hardware failure, your problem is one of configuration. Hopefully, this will get you going in the proper direction. I have used the nvidia drivers for almost 3 years with both the 5200 and 6200 cards and various different screen configurations, including laptops. I _DO_ know that configuration is a total bear. Not easy, confusing, and not intuitive! A good way to see what a bare nvidia configuration will be like is to run Xorg -configure. It will create a file in /root called xorg.conf.new which will show every option the driver (in this case nvidia) reports. While I currently only have one monitor, FWIW here is xorg.conf.new as reported by Xorg -configure for my setup. HTH xorg.conf.new: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice"Mouse0" "CorePointer" InputDevice"Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/lib/X11/rgb" ModulePath "/usr/lib/modules" FontPath "/usr/share/fonts/misc/" FontPath "/usr/share/fonts/TTF/" FontPath "/usr/share/fonts/Type1/" FontPath "/usr/share/fonts/CID/" FontPath "/usr/share/fonts/75dpi/" FontPath "/usr/share/fonts/100dpi/" EndSection Section "Module" Load "record" Load "glx" Load "extmod" Load "xtrap" Load "dri" Load "dbe" Load "freetype" Load "type1" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/mouse" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName"Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: : integer, : float, : "True"/"False", ### : "String", : " Hz/kHz/MHz" ### [arg]: arg optional #Option "DigitalVibrance" # #Option "NoFlip"# [] #Option "Dac8Bit" # [] #Option "NoLogo"# [] #Option "UBB" # [] #Option "Stereo"# #Option "SWcursor" # [] #Option "HWcursor" # [] #Option "VideoKey" # #Option "NvAGP" # #Option "IgnoreEDID"# [] #Option "NoDDC" # [] #Option "ConnectedMonitor" # #Option "ConnectedMonitors" # #Option "TVStandard"# #Option "TVOutFormat" # #Option "RenderAccel" # [] #Option "CursorShadow" # [] #Option "CursorShadowAlpha" # #Option "CursorShadowXOffset" # #Option "CursorShadowYOffset" # #Option "UseEdidFreqs" # [] #Option "FlatPanelProperties" # #Option "TwinView" # [] #Option "TwinViewOrientation" # #Option "SecondMonitorHorizSync"# #Option "SecondMonitorVertRefresh" # #Option "MetaModes" # #Option "UseInt10Module"# [] #Option "NoTwinViewXineramaInfo"# [] #Option "NoRenderExtension" # [] #Option "Overlay" # [] #Option "CIOverlay" # [] #Option "Force
Re: [gentoo-user] modules built post kernel install (on the fly)
Harry Putnam wrote: > Is this possible: > > Compile a module by itself (not during kernel compile) and insert > that module into a running kernel. It can be done, the best example of it being done is the NVidia kernel module. Although it seems, you want to compile a module inside a kernel tree. I think it'll be lot complex. I dont have any hands on experience in this, but i suggest take a look at the Makefiles of other kernel modules available outside the kernel tree. Sorry cant give you specifics on how to do it. PS: Also ALSA-driver package are nothing but kernel modules, you may want to check thier makefiles as well. -- Linux Kernel : 2.6.15-gentoo-r7 GCC version : 4.0.2 (Gentoo 4.0.2-r3, pie-8.7.8) Processor : AMD Athlon XP 2600+ RAM : 1 GB DDR 333 SDRAM CFLAGS USED : -march=athlon-xp -O3 -m3dnow -msse -mmmx -pipe -fomit-frame-pointer -momit-leaf-frame-pointer -ftracer -fno-crossjumping -falign-functions=16 -falign-loops=16 -falign-jumps=16 -fno-align-labels -mfpmath=387,sse -maccumulate-outgoing-args CXXFLAGS USED : $(CFLAGS) -fvisibility-inlines-hidden pgpxTf3P0LePY.pgp Description: PGP signature
[gentoo-user] Re: modules built post kernel install (on the fly)
On Sat, 04 Mar 2006 09:15:04 -0600, Harry Putnam wrote: > Is this possible: > > Compile a module by itself (not during kernel compile) and insert that > module into a running kernel. > > I'm pretty sure this is possible but have no idea how to do it. Pawing > thru google. `site:gentoo.org modules "on the fly" ' and similar strings > even just `kernel module' > > Turns up scads of stuff but none of it is hitting this head on.. or I > didn't paw far enough so asking here for pointers to documentation > that will cover this. Yes. cd /usr/src/linux make menuconfig or make xconfig choose the module option you wish to enable Select whether to build into the kernel or as a module. exit and save make make modules_install You should not have to copy bzImage unless you built your new modules into the kernel. Then edit your /etc/autoload directory to include the module you want to modprobe into the system. easy! -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: modules built post kernel install (on the fly)
Peter <[EMAIL PROTECTED]> writes: > Yes. > > cd /usr/src/linux > make menuconfig or make xconfig > choose the module option you wish to enable > Select whether to build into the kernel or as a module. > exit and save > make > make modules_install > > You should not have to copy bzImage unless you built your new modules into > the kernel. Haa... thanks for the step thru... and I'm guessing if you don't want to reboot you can insmod this module into running kernel? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: modules built post kernel install (on the fly)
Peter wrote: > On Sat, 04 Mar 2006 09:15:04 -0600, Harry Putnam wrote: > > > Is this possible: > > > > Compile a module by itself (not during kernel compile) and insert that > > module into a running kernel. > > > > Yes. > > cd /usr/src/linux > make menuconfig or make xconfig > choose the module option you wish to enable > Select whether to build into the kernel or as a module. > exit and save > make > make modules_install > > You should not have to copy bzImage unless you built your new modules into > the kernel. > > Then edit your /etc/autoload directory to include the module you want to > modprobe into the system. > This sounds simpler than what i had thought. I suggest giving this a try. My earlier suggestion to read the Makefiles has been taken back now.. :) -- Linux Kernel : 2.6.15-gentoo-r7 GCC version : 4.0.2 (Gentoo 4.0.2-r3, pie-8.7.8) Processor : AMD Athlon XP 2600+ RAM : 1 GB DDR 333 SDRAM CFLAGS USED : -march=athlon-xp -O3 -m3dnow -msse -mmmx -pipe -fomit-frame-pointer -momit-leaf-frame-pointer -ftracer -fno-crossjumping -falign-functions=16 -falign-loops=16 -falign-jumps=16 -fno-align-labels -mfpmath=387,sse -maccumulate-outgoing-args CXXFLAGS USED : $(CFLAGS) -fvisibility-inlines-hidden pgpKZzB9mlwwK.pgp Description: PGP signature
[gentoo-user] Re: modules built post kernel install (on the fly)
Masood Ahmed <[EMAIL PROTECTED]> writes: [...] Thanks Masood, for the pointers.. I have a question about your sig. > -- > Linux Kernel : 2.6.15-gentoo-r7 > GCC version : 4.0.2 (Gentoo 4.0.2-r3, pie-8.7.8) > Processor : AMD Athlon XP 2600+ > RAM : 1 GB DDR 333 SDRAM > CFLAGS USED : -march=athlon-xp -O3 -m3dnow -msse -mmmx -pipe > -fomit-frame-pointer -momit-leaf-frame-pointer -ftracer > -fno-crossjumping -falign-functions=16 -falign-loops=16 > -falign-jumps=16 -fno-align-labels -mfpmath=387,sse > -maccumulate-outgoing-args > CXXFLAGS USED : $(CFLAGS) -fvisibility-inlines-hidden Do you get that info from a single command or several? -- gentoo-user@gentoo.org mailing list
[gentoo-user] bind zone.file won't load
Running an authoritative name server on a small home lan as training exercise. And using DNS and Bind 4th ed as a guide. A quick sketch of this network(There are more hosts on it but for simplicity): (All have prefix 192.168 and netmask 255.255.255.0) INTERNET | (Dynamic IP) | NETGEAR (consumer grade router) reader | 0.20 fwobsd -- | 0.4| 0.3 | 0.5| 0.19 || || [ m1 ] [ m2 ] [ m3 ] [ m4 ] | 1.2| 1.1 || rdmz fwdmz So I have two networks here.. 192.168.0/24 and 192.168.1/24 M1 and M4 both have 2 nics and addresses in 192.168.0 and 192.168.1 as shown... (if mail doesn't mangle my asci production too bad.) My problem is how to integrate 192.168.1/24 into my zone.files The reverse-pointer zone.file for 192.168.1 is where the rub is. I'm very inexperienced with routing in general and nameservers in particular setting up a home lan nameserver is a training exercise for me. Where I get confused is what is the origin `@' for this zone? Can I use `@' or need to spell out 192.168.1? What happens to my domain... `local.lan' does it still cover what are now really two numeric domains 192.168.0 and 192.168.1? I've tried various combinations in the reverse zone for 192.168.1, but all I've tried have has one or another problem loading, or being ignored. The reverse file for 192.168.1 is below and at the end .. after names logs is the db.local.lan zone file. (naming convention stolen from DNS and Bind (4th ed)) I'll post, at the end the named log output from this zone.file as an example but as mentioned, I've tried quite a few combinations unsuccessfully. I can post them all but hopefully someone will see the problem I've created. This one causes the 2 address in 192.168.1 to simply be ignored... other versions have different reasons for not loading properly. db.192.168.1 8< snip = $TTL 1D @ IN SOA reader.local.lan. reader.reader.local.lan. ( 200405190 ; serial 28800 ; refresh (8 hours) 14400 ; retry (4 hours) 2419200; expire (4 weeks) 86400 ; minimum (1 day) ) ; ; Name servers (The name '@' is implied) ; IN NS reader ; ; Addresses point to canonical names ; 192.168.1.2 IN PTRrdmz.local.lan. 192.168.1.1 IN PTRfwdmz.local.lan. == 8< snip === [ -ed leaving `@' as is but spelling out canonical IP for the two on 192.168.1 cause them to be ignored] Mar 4 09:59:39 reader named[8959]: pri/db.192.168.1:18: ignoring out-of-zone data (192.168.1.2) Mar 4 09:59:39 reader named[8959]: pri/db.192.168.1:19: ignoring out-of-zone data (192.168.1.1) Mar 4 09:59:39 reader named[8959]: zone 1.168.192.in-addr.arpa/IN: loaded serial 200405190 === [...] == db.local.lan (I think this is close to right at least) 8< snip $TTL 1D @ IN SOAreader.local.lan. hostmaster ( 200405191 ; serial 8H; refresh 4H; retry 4W; expire 1D ) ; minimum ;; Nameserver (The name '@' is implied) IN NS reader ;; smtp hub (The name '@' is implied) IN MX10 reader ;; addresses for the canonical names localhost IN A 127.0.0.1 ansil IN A 192.168.0.21 bjpIN A 192.168.0.16 fw IN A 192.168.0.20 fwobsd IN A 192.168.0.19 IN A 192.168.1.1 harvey IN A 192.168.0.22 mob2 IN A 192.168.0.3 reader IN A 192.168.0.4 IN A 192.168.1.2 wapIN A 192.168.0.50 ;; aliases smtp IN CNAME reader wwwIN CNAME reader ticIN CNAME reader ;; interface specific addresses fwdmz IN A 192.168.1.1 rdmz IN A 192.168.1.2 8< snip == -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: modules built post kernel install (on the fly)
Harry Putnam wrote: > Masood Ahmed <[EMAIL PROTECTED]> writes: > [...] > Thanks Masood, for the pointers.. I have a question about your sig. > > () > > Do you get that info from a single command or several? > The answer is several, for kernel version i did 'uname -r' for gcc-version i did 'gcc -v' for processor i did 'cat /proc/cpuinfo' for ram 'free -t' for CFLAGS 'cat /etc/make.conf | grep CFLAGS' for CXXFLAGS 'cat /etc/make.conf | grep CXXFLAGS' I think this is not what you expected. I dont have enough sed and grep knowledge to automate the process, but i'm learning it. I'd like to write a script that would output only the required contents from the output of the commands above. Got any idea's anyone? -- Linux Kernel : 2.6.15-gentoo-r7 GCC version : 4.0.2 (Gentoo 4.0.2-r3, pie-8.7.8) Processor : AMD Athlon XP 2600+ RAM : 1 GB DDR 333 SDRAM CFLAGS USED : -march=athlon-xp -O3 -m3dnow -msse -mmmx -pipe -fomit-frame-pointer -momit-leaf-frame-pointer -ftracer -fno-crossjumping -falign-functions=16 -falign-loops=16 -falign-jumps=16 -fno-align-labels -mfpmath=387,sse -maccumulate-outgoing-args CXXFLAGS USED : $(CFLAGS) -fvisibility-inlines-hidden pgpaSOYhgNMI8.pgp Description: PGP signature
[gentoo-user] Re: modules built post kernel install (on the fly)
On Sat, 04 Mar 2006 09:35:35 -0600, Harry Putnam wrote: > Peter <[EMAIL PROTECTED]> writes: > >> Yes. >> >> cd /usr/src/linux >> make menuconfig or make xconfig >> choose the module option you wish to enable >> Select whether to build into the kernel or as a module. >> exit and save >> make >> make modules_install >> >> You should not have to copy bzImage unless you built your new modules into >> the kernel. > > Haa... thanks for the step thru... and I'm guessing if you don't want > to reboot you can insmod this module into running kernel? That is correct. Unless you alter bzImage, modprobe newmodule should work just fine. If your new module is built in, you will need to reload the kernel (reboot). Good luck! -- gentoo-user@gentoo.org mailing list
[gentoo-user] tcprobe: no support for DVD reading
Any idea why my tcprobe isn't supporting dvd reading? I have libdvdread installed: # tcprobe -H 10 -i /dev/dvd (dvd_reader.c) no support for DVD reading configured - exit. (iodump.c) unable to open directory "/dev/dvd" # emerge -p libdvdread These are the packages that I would merge, in order: Calculating dependencies ...done! [ebuild R ] media-libs/libdvdread-0.9.4-r1 # Do I need to do something special to the transcode compile options? -- gentoo-user@gentoo.org mailing list
[gentoo-user] lyricue
Anyone using lyricue, or another dual headed presentation system (lcp on laptop for editing, while displaying another screen on teh lcd projector) I am interested in setting this up for the church, we are now just using OOo-impress, but simultanous editing and display oif a different screen sounds handy... Mike -- Michael W. Holdeman Powered by Gentoo Linux www.gentoo.org | Kernel 2.6.15-ck2 | VMWare Workstation 5.5.1 vmware.com | Win4LinPro 6.1.1-03 win4lin.com | | -- gentoo-user@gentoo.org mailing list
[gentoo-user] Courier-Imap slowing to a crawl
Hey everyone. I've been running a Gentoo mail server here at home for almost 3 years and have had great luck with it. However, since I made a large group of updates a few weeks ago, Courier-Imap has been slowing down, so much so that my client requests eventually time out. A reboot fixes this, but it's gotten to the point where I'd have to reboot every single day in order to keep it running the way it should be, and I know there must be some way to fix this. I've tried just restarting the Courier daemons, but this alone is not sufficient. Courier-Imap was never updated, so that shouldn't be the problem. However, the packages that were updated (with new USE flags; using --newuse) were Postfix, OpenLDAP (newly merged), Apache (from 1.3 to 2.0), OpenSSL (I suspected at first that I had to build Courier and Courier-authlib again against the new OpenSSL, but this didn't prove to help) and a few others (unfortunately, I can't remember what they were, but I highly doubt they were related.) Just to see if this would help, I tried rebuilding Courier-Imap and Courier-authlib after having merged the new packages. Unfortunately, this did not help. Authentication itself goes quick. However, at the point where Thunderbird says, "Looking for folders," (sorry I couldn't be more descriptive than that) it goes on and on and on and eventually times out. After I've rebooted, it goes quickly like it always did before the updates, but then it gradually slows down, and by the next day, it's usually really bad again. I wondered if something was hogging the CPU, or if something was leaking memory, but I checked both those things, and so far, I don't think either of those are a problem. The only other change I can think of is that I had been compiling with -O3 optimizations ever since the server was built (I always had great luck with that and it's been very stable; I actually believe this may have been the default setting at the time), but decided to step down to -O2 before I built all those other packages since I wanted to make sure everything would be stable. Does the fact that some packages were compiled with -O3 optimizations and the fact that more recently some were built with -O2 optimizations cause some kind of problem? Is there a way that I can rebuild my entire server on either -O2 or -O3 optimizations so that I can make everything consistent? Should I even care about that? I'm just trying to throw out every possibility here as this is one of the most bizarre things that's happened to me to date. If anybody has any ideas, or if anybody has had any similar problems, a reply would be greatly appreciated! :) Thanks everyone. James -- gentoo-user@gentoo.org mailing list
[gentoo-user] very slow booting
hi thereim having some slow boots after i upgraded my kernel from 2.6.12, before, all the boot process to the login took about 25-30secs, but i have tried the gentoo sources 2.6.15 and the suspend2 sources 2.6.14 and 2.6.15 (currently using this one for the hibernate feature) with the same bad results, it tooks like 50-60 secs just to get over the initial boot process, after that it goes smooth loading the modules and services that tooks like 8-10 more seconds, boosting the overall time at 70secs, just too much i notice that the boot stops some second on things like iptables and ip_contrack, but my question is why that doesnt happen on my old kernel 2.6.12? and what can i do about it?my machine is an inspiron 6000 laptop
[gentoo-user] Re: tcprobe: no support for DVD reading
On Sat, 04 Mar 2006 09:34:09 -0800, Wes Gray wrote: > Any idea why my tcprobe isn't supporting dvd reading? I have libdvdread > installed: > > # tcprobe -H 10 -i /dev/dvd > (dvd_reader.c) no support for DVD reading configured - exit. > (iodump.c) unable to open directory "/dev/dvd" > > # emerge -p libdvdread > > These are the packages that I would merge, in order: > > Calculating dependencies ...done! > [ebuild R ] media-libs/libdvdread-0.9.4-r1 > # > > Do I need to do something special to the transcode compile options? 1) Try as root. Some programs like cdrecord-ProDVD simply won't work on some devices unless you're root or sudo root. 2) Make sure /dev/dvd actually points to your device. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: tcprobe: no support for DVD reading
On Sat, Mar 04, 2006 at 02:09:51PM -0500, Peter wrote: > > 1) Try as root. Some programs like cdrecord-ProDVD simply won't work on > some devices unless you're root or sudo root. > > 2) Make sure /dev/dvd actually points to your device. Doing it as root gives me the same error message. gmplayer /dev/dvd works fine to play a DVD, so I think it's OK. Here is where it points: % ls -la /dev/dvd lrwxrwxrwx 1 root root 3 Mar 3 14:27 /dev/dvd -> hdd -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] tcprobe: no support for DVD reading
On 3/4/06, Wes Gray <[EMAIL PROTECTED]> wrote: > Do I need to do something special to the transcode compile options? Do you have USE=dvdread for transcode (emerge -pv transcode)? -Richard -- gentoo-user@gentoo.org mailing list
[gentoo-user] Which chip to use in ATI card?
My video card apparently has 2 chips, according to "lspci -v"... 05:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)] (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc Unknown device 1b60 Flags: bus master, fast devsel, latency 0, IRQ 5 Memory at e000 (32-bit, prefetchable) [size=128M] I/O ports at 9000 [size=256] Memory at e900 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at e800 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Capabilities: [58] Express Endpoint IRQ 0 Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [100] Advanced Error Reporting 05:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE] Subsystem: ATI Technologies Inc Unknown device 1b61 Flags: bus master, fast devsel, latency 0 Memory at e901 (32-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 2 Capabilities: [58] Express Endpoint IRQ 0 And here's what the Xorg log has to say... (II) Primary Device is: PCI 05:00:0 (--) Assigning device section with no busID to primary device (WW) RADEON: No matching Device section for instance (BusID PCI:5:0:1) found (--) Chipset ATI Radeon X300 (RV370) 5B60 (PCIE) found Which chip on teh card should it be using, and what are the best modules I can load? -- Walter Dnes <[EMAIL PROTECTED]> In linux /sbin/init is Job #1 My musings on technology and security at http://tech_sec.blog.ca -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: Re: tcprobe: no support for DVD reading
On Sat, 04 Mar 2006 11:32:42 -0800, Wes Gray wrote: > On Sat, Mar 04, 2006 at 02:09:51PM -0500, Peter wrote: >> >> 1) Try as root. Some programs like cdrecord-ProDVD simply won't work on >> some devices unless you're root or sudo root. >> >> 2) Make sure /dev/dvd actually points to your device. > > Doing it as root gives me the same error message. gmplayer /dev/dvd works > fine to play a DVD, so I think it's OK. Here is where it points: > > % ls -la /dev/dvd > lrwxrwxrwx 1 root root 3 Mar 3 14:27 /dev/dvd -> hdd Well, if Richard's suggestion about USE=dvd-read does not work, make sure the device is NOT mounted. Some dvd writers access hardware directly and therefore mounts will mess with that. Otherwise, check the program's usenet groups and bug reports. Unfortunately, it's been my experience that for DVD authoring and anything more than plain copying or burning files (i.e. most things beyond mkisofs), linux is a lot of work. Best to have a M$ partition and use whatever software you need for a particular task. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] xorg-7: no console switching; can't exit gnome sanely.
On Saturday 04 March 2006 02:33 Willie Wong was like: > On Sat, Mar 04, 2006 at 12:24:07AM -0800, Penguin Lover Robert Persson squawked: > > I have just upgraded to xorg-7 and found that I can no longer use > > ctrl-alt-Fn to switch out of the x server. I am using the same version of > > fglrx that I was before I upgraded and this problem started happening. > > How do I get console-switching back? > > Option "DontVTSwitch" "Off" > > in the xorg.conf This doesn't appear to work. Although I don't understand why I should need to specify a value for DontVTSwitch anyway. Is "Off" no longer the default? Thanks Robert -- Robert Persson Conspiracy Bears: Once upon a time there were lots of conspiracy bears... -- gentoo-user@gentoo.org mailing list
[gentoo-user] env-update problem
Hi, I'm trying to install ORACLE on my box following the HOWTO on gentoo-wiki. After creating this /etc/env.d/99oracle: ORACLE_BASE=/opt/oracle ORACLE_HOME=$ORACLE_BASE/product/10.1.0.3 ORACLE_SID=''MyDB'' ORACLE_TERM=xterm ORACLE_OWNER=oracle TNS_ADMIN=$ORACLE_HOME/network/admin NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1 ORA_NLS10=$ORACLE_HOME/nls/data CLASSPATH=$ORACLE_HOME/jdbc/lib/classes12.zip LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32 DISABLE_HUGETLBFS=1 PATH=$ORACLE_HOME/bin ROOTPATH=$ORACLE_HOME/bin LDPATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32 ... I get this from env-update: frankies env.d # env-update !!! Invalid token (not "=") ORACLE_TERM Traceback (most recent call last): File "/usr/sbin/env-update", line 29, in ? portage.env_update(makelinks) File "/usr/lib/portage/pym/portage.py", line 561, in env_update myconfig=getconfig(root+"etc/env.d/"+x) File "/usr/lib/portage/pym/portage_util.py", line 257, in getconfig raise e.__class__, str(e)+" in "+mycfg Exception: ParseError: Invalid token (not '='): /etc/env.d/99oracle: line 4 in /etc/env.d/99oracle frankies env.d # Can someone explain how to fix this? Thanks in advance Frank -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] bind zone.file won't load
Running an authoritative name server on a small home lan as training exercise. And using DNS and Bind 4th ed as a guide. A quick sketch of this network(There are more hosts on it but for simplicity): (All have prefix 192.168 and netmask 255.255.255.0) INTERNET | (Dynamic IP) | NETGEAR (consumer grade router) reader | 0.20 fwobsd -- | 0.4| 0.3 | 0.5| 0.19 || || [ m1 ] [ m2 ] [ m3 ] [ m4 ] | 1.2| 1.1 || rdmz fwdmz So I have two networks here.. 192.168.0/24 and 192.168.1/24 M1 and M4 both have 2 nics and addresses in 192.168.0 and 192.168.1 as shown... (if mail doesn't mangle my asci production too bad.) My problem is how to integrate 192.168.1/24 into my zone.files The reverse-pointer zone.file for 192.168.1 is where the rub is. I'm very inexperienced with routing in general and nameservers in particular setting up a home lan nameserver is a training exercise for me. Where I get confused is what is the origin `@' for this zone? Can I use `@' or need to spell out 192.168.1? What happens to my domain... `local.lan' does it still cover what are now really two numeric domains 192.168.0 and 192.168.1? Here's a reverse zone file for my home network. It's 10.10.0/24 but you'll figure out how to tailor this to your needs. # cat pri/0.10.10.zone ;BIND DUMP V8 $ORIGIN 10.10.IN-ADDR.ARPA. 0 3600IN SOA baikal.iproducts.test. root.baikal.iproducts.test. ( 20050421 3600 900 360 3600 );Cl=5 3600IN NS baikal.iproducts.test. ;Cl=5 $ORIGIN 0.10.10.IN-ADDR.ARPA. 2 3600IN PTR volga.iproducts.test. ;Cl=5 1 3600IN PTR baikal.iproducts.test. ;Cl=5 3 3600IN PTR g40.iproducts.test. ;Cl=5 ;10 3600IN PTR wisla.iproducts.test. ;Cl=5 #cat named.conf ... zone "0.10.10.in-addr.arpa" IN { type master; file "pri/0.10.10.zone"; allow-update{ 10.10.0.1; }; }; ... HTH, Sasha -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] xorg-7: no console switching; can't exit gnome sanely.
On Sat, Mar 04, 2006 at 02:13:04PM -0800, Penguin Lover Robert Persson squawked: > On Saturday 04 March 2006 02:33 Willie Wong was like: > > Option "DontVTSwitch" "Off" > > > > in the xorg.conf > > This doesn't appear to work. Although I don't understand why I should need to > specify a value for DontVTSwitch anyway. Is "Off" no longer the default? > In that case, I am out of ideas. Sorry! I mentioned that because it is the one thing I remembered might affect VT behaviour in X. I don't use xorg-7 personally, so I can't verify/test. Perhaps, once Gmane comes back up, you can search the list archives. I remember there being two threads in the past 3 or 4 months on the similar VT problem. Perhaps there were more insight in some of them. Best of luck, W -- Pintsize: My first commandment is: "Though shalt not beget electromagnetism in the presence of your Lord." Sortir en Pantoufles: up 112 days, 15:15 -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] env-update problem
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Franta wrote: > Hi, > > I'm trying to install ORACLE on my box following the HOWTO on > gentoo-wiki. > > After creating this /etc/env.d/99oracle: > > ORACLE_BASE=/opt/oracle > ORACLE_HOME=$ORACLE_BASE/product/10.1.0.3 > ORACLE_SID=''MyDB'' It's choking on the '' characters in line 3 above. Apparently that doesn't work with python's shlex module that is used to parse the 99oracle file. For reference, here are the rules (portage uses non-POSIX mode): http://docs.python.org/lib/shlex-parsing-rules.html > ORACLE_TERM=xterm > ORACLE_OWNER=oracle > TNS_ADMIN=$ORACLE_HOME/network/admin > NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1 > ORA_NLS10=$ORACLE_HOME/nls/data > CLASSPATH=$ORACLE_HOME/jdbc/lib/classes12.zip > LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32 > DISABLE_HUGETLBFS=1 > PATH=$ORACLE_HOME/bin > ROOTPATH=$ORACLE_HOME/bin > LDPATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32 > > ... I get this from env-update: > > frankies env.d # env-update > !!! Invalid token (not "=") ORACLE_TERM > Traceback (most recent call last): > File "/usr/sbin/env-update", line 29, in ? > portage.env_update(makelinks) > File "/usr/lib/portage/pym/portage.py", line 561, in env_update > myconfig=getconfig(root+"etc/env.d/"+x) > File "/usr/lib/portage/pym/portage_util.py", line 257, in getconfig > raise e.__class__, str(e)+" in "+mycfg > Exception: ParseError: Invalid token (not '='): /etc/env.d/99oracle: > line 4 in /etc/env.d/99oracle > frankies env.d # Hmm, the actual problem is on line 3 but the parser complains about line 4 instead. Zac -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2.1 (GNU/Linux) iD8DBQFECiCS/ejvha5XGaMRApVpAJ9A09K78tGTDKGGeZaGvv3Mw7pykwCfac6X zs5d0MULkX8C3tGlG3b6bzI= =uIg9 -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Which chip to use in ATI card?
Walter Dnes schreef: > My video card apparently has 2 chips, according to "lspci -v"... Yes, they all do; so does mine: 01:00.0 VGA compatible controller: ATI Technologies Inc R350 AH [Radeon 9800] (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc Unknown device 4f72 Flags: bus master, stepping, 66MHz, medium devsel, latency 255, IRQ 11 Memory at d000 (32-bit, prefetchable) [size=128M] I/O ports at c000 [size=256] Memory at e100 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at e000 [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Capabilities: [50] Power Management version 2 01:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon 9800] (Secondary) Subsystem: ATI Technologies Inc Unknown device 4f73 Flags: stepping, 66MHz, medium devsel Memory at d800 (32-bit, prefetchable) [disabled] [size=128M] Memory at e101 (32-bit, non-prefetchable) [disabled] [size=64K] Capabilities: [50] Power Management version 2 The cards have two chips because they have two display outputs (you can connect two monitors). > And here's what the Xorg log has to say... > > (II) Primary Device is: PCI 05:00:0 (--) Assigning device section > with no busID to primary device (WW) RADEON: No matching Device > section for instance (BusID PCI:5:0:1) found (--) Chipset ATI Radeon > X300 (RV370) 5B60 (PCIE) found > Yes, that's -- almost--normal too: (II) Primary Device is: PCI 01:00:0 (II) ATI Proprietary Linux Driver Version Identifier:8.22.5 (II) ATI Proprietary Linux Driver Release Identifier: LGDr8.22g1 (II) ATI Proprietary Linux Driver Build Date: Feb 7 2006 19:33:15 (II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.22.1-driver-lnx-244115 (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found (--) Chipset RADEON 9800 SE (R350 4148) found > Which chip on teh card should it be using, and what are the best > modules I can load? The chip will be found automatically when you load the appropriate drivers, depending on how many monitors you have connected. I, for example have only 1 CRT connected; the secondary output always gives an error saying that it's "not found", because there's no monitor connected to it (so the identification signal sent along that channel goes into oblivion). For an X300, depending on what you want, you can use the Xorg-7.0 "radeon" driver if you only want/need 2D; if you want/need 3D/OpenGL, or are using Xorg-6.8, you should probably "emerge ati-drivers" for the proprietary fglrx drivers. They "suck", but they're way better than nothing at all. Hope this helps, Holly -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: Re: tcprobe: no support for DVD reading
On Sat, Mar 04, 2006 at 05:08:03PM -0500, Peter wrote: > Well, if Richard's suggestion about USE=dvd-read does not work, make sure > the device is NOT mounted. Some dvd writers access hardware directly and > therefore mounts will mess with that. Otherwise, check the program's > usenet groups and bug reports. I got it working by setting the USE variable in package.use. Odd, it used to work without needing that. > Unfortunately, it's been my experience that for DVD authoring and anything > more than plain copying or burning files (i.e. most things beyond > mkisofs), linux is a lot of work. Best to have a M$ partition and use > whatever software you need for a particular task. dvd::rip has worked well for me in the past for making divx files (via transcode) from a DVD. For ripping a DVD9, compressing, and burning to DVD5 I find that using DVD Shrink under wine works quite well. -- gentoo-user@gentoo.org mailing list
[gentoo-user] Changing role of router
My current home network consists of several PC connected to a Netgear wireless router (using its default factory IP of 192.168.0.1). It also serves DHCP address to machines that need it. It, in turn, is connected to my DSL modem. I will be adding a firewall to the mix and plan to use the Netgear wireless router solely as a hub and WAP. I will disable it's DHCP serving functionality. My questions are: a) Given it's new role, will it still require an IP address? If so, it will be on my internal network (vs. DMZ with servers) and have an address of 192.168.1.1 for example. Should this be changed now before I rearrange the configuration? I assume it needs an IP as I will need to access the web-based admin interface to turn wireless on and off, etc. b) I would assume the WAN port would not be used and all machines using the "hub" would just plug into one of the four LAN ports. c) I have a "true" hub that will be used in the DMZ consisting of machines with addresses like 192.168.0.x. Here I assume the hub would *not* have an IP assigned to it. Just to be clear, the firewall box has 3 NICs. One will have an IP (dynamic) assigned by my ISP. The second will serve the DMZ and have an IP of 192.168.0.1 and the third will serve the internal network and have an address of 192.168.1.1. Just trying to clear some conceptual errors I seem to be having. Thanks for any input, clarifications, and/or corrections. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Changing role of router
On Sunday 05 March 2006 01:44, Trey Sizemore wrote: > a) Given it's new role, will it still require an IP address? If so, it > will be on my internal network (vs. DMZ with servers) and have an > address of 192.168.1.1 for example. Should this be changed now before > I rearrange the configuration? I assume it needs an IP as I will need > to access the web-based admin interface to turn wireless on and off, > etc. If you want to access it it will need an IP, but it doesn't matter when you change it, so long as it doesn't conflict with anything else. > b) I would assume the WAN port would not be used and all machines > using the "hub" would just plug into one of the four LAN ports. Yes. > c) I have a "true" hub that will be used in the DMZ consisting of > machines with addresses like 192.168.0.x. Here I assume the hub would > *not* have an IP assigned to it. Depends if it has an admin interface. A dumb hub/switch won't have an IP. BTW, a hub is a hub, a switch is a switch. They are different things. -- Mike Williams -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: modules built post kernel install (on the fly)
Peter <[EMAIL PROTECTED]> writes: > That is correct. Unless you alter bzImage, modprobe newmodule should work > just fine. If your new module is built in, you will need to reload the > kernel (reboot). Ok, this is confusing to me... What do you mean by `built in'. I'm thinking the very nature of a module is that it isn't built in. Or do you just mean I'd chose `*' instead of `m' and move bzImage into place in /boot? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: modules built post kernel install (on the fly)
Builtin means it's built into the kernel - the * indicates that. On Saturday March 4 2006 23:03, Harry Putnam wrote: > Peter <[EMAIL PROTECTED]> writes: > > That is correct. Unless you alter bzImage, modprobe newmodule should work > > just fine. If your new module is built in, you will need to reload the > > kernel (reboot). > > Ok, this is confusing to me... What do you mean by `built in'. I'm > thinking the very nature of a module is that it isn't built in. > > Or do you just mean I'd chose `*' instead of `m' and move bzImage into > place in /boot? -- Brett I. Holcomb -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: bind zone.file won't load
Alexander Kirillov <[EMAIL PROTECTED]> writes: > Here's a reverse zone file for my home network. It's 10.10.0/24 > but you'll figure out how to tailor this to your needs. I think this is not where I'm having the trouble. Just one network for home lan I'm ok with. > # cat pri/0.10.10.zone > > ;BIND DUMP V8 > $ORIGIN 10.10.IN-ADDR.ARPA. > 0 3600IN SOA baikal.iproducts.test. > root.baikal.iproducts.test. ( > 20050421 3600 900 360 3600 );Cl=5 > 3600IN NS baikal.iproducts.test. ;Cl=5 > $ORIGIN 0.10.10.IN-ADDR.ARPA. > 2 3600IN PTR volga.iproducts.test. ;Cl=5 > 1 3600IN PTR baikal.iproducts.test. ;Cl=5 > 3 3600IN PTR g40.iproducts.test. ;Cl=5 > ;10 3600IN PTR wisla.iproducts.test. ;Cl=5 > > > #cat named.conf > > ... > zone "0.10.10.in-addr.arpa" IN { > type master; > file "pri/0.10.10.zone"; > allow-update{ > 10.10.0.1; > }; > }; Thanks... That apears to be about what I've got for 192.168.0/24 Can you show how a zone file for adding 3 new addresses to your scheme One new machine new.iproducts.test whos sole job is to be passed copies of all connection attempts at the firewall to internet interface. This is an imaginary exercise and is not suggesting that you would want to do something like it. However it is what I'm trying to do and is the source of my bind problem. `new' has two nics the one facing the firewall/router to internet is only allowed to talk to that router on that nic (by pf blocking) at 10.10.0.5. The second nic is `newdmz' at 10.10.1.1 and it is hardwired to a simple hub and from there to a second nic on g40.iproducts.test. Which is `g40dmz' at 10.10.1.2 The second nic is so 1 other lan machine can ssh to newdmz for what ever reason. So we've added: new.iproducts.test. at 10.10.0.5 call them: newdmz.iproducts.test. at 10.10.1.1 g40dmz.iproducts.test. at 10.10.1.2 The two nics are hard wired thru a hub to each other but not to anything else. Neither machine with 2 nics is setup as a router. That is, forwarding internally is not enabled. Now integrating those two on 10.10.1/24 in zone file: db.iproducts.test is pretty straight forward But the reverse zone file db.10.10.1 is where my meager skills end. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: modules built post kernel install (on the fly)
Harry Putnam schreef: > Peter <[EMAIL PROTECTED]> writes: > >> That is correct. Unless you alter bzImage, modprobe newmodule >> should work just fine. If your new module is built in, you will >> need to reload the kernel (reboot). > > Ok, this is confusing to me... What do you mean by `built in'. I'm > thinking the very nature of a module is that it isn't built in. > > Or do you just mean I'd chose `*' instead of `m' and move bzImage > into place in /boot? > (Most) kernel modules can be either built into the kernel, or separately from the kernel. Only a very few can only be builtin or only loadable. But whichever they are, they're really all modules-- the kernel is a modular framework, after all, which is why you have to configure it-- to say which kernel modules you want to build, and how you want them built (as builtin to the kernel, or as separate loadable modules). If they're built into the kernel "body" ("*"), they're called "built-in", in which case they are an integral part of the bzImage, and increase the size of the kernel. Builtins will also always be loaded by the kernel just because they're part of the kernel; this is why you must build certain modules (like for filesystems) as builtins and not as modules, so the kernel has them loaded before it needs them to read the relevant filesystem. If the modules built as dynamically loadable modules ("M". which produces little chunks of code-- *.ko files, I think-- in /usr/lib/modules/ when you run make modules_install), they are called "modules" (or loadable modules, or dynamic modules). In this case, they 1) do not increase the size of the kernel (because they're not in the bzImage that is the kernel), 2) they are dynamically loadable (modprobe) and removeable (modprobe -r), and may or may not exist at all (because you have the ability to pick and choose which loadable modules you actually want to build in your kernel config). So what Peter meant was that if you add the modules as loadable modules (by choosing "M"), you wouldn't have to do anything other than make and make modules_install to install the new module (you need to do a make so that the kernel config knows that there's a new module *to* make), but because the body of the kernel has not actually changed (since loadable modules are not compiled into the bzImage like the builtin * modules are), you don't actually have to install the new bzImage, because it's exactly the same as the one you had previously installed. You should be able to modprobe the new module and go right on without rebooting. However, if you compiled the new modules directly into the kernel (by choosing "*", or compiling a module that has a sub-function that requires a *), then you would have to install the new bzImage and reboot, because the bzImage (the kernel) has actually changed. Hope this helps explain things, Holly -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: bind zone.file won't load
Alexander Kirillov <[EMAIL PROTECTED]> writes: [...] > ;BIND DUMP V8 > $ORIGIN 10.10.IN-ADDR.ARPA. > 0 3600IN SOA baikal.iproducts.test. > root.baikal.iproducts.test. ( Alexander, I meant to ask in my reply what the 3600 is all about? My study of DNS and Bind hasn't discussed that field yet. -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: bind zone.file won't load
Alexander Kirillov <[EMAIL PROTECTED]> writes: > Here's a reverse zone file for my home network. It's 10.10.0/24 > but you'll figure out how to tailor this to your needs. Taking your example I come up with the zone file posted at the end. It loads with no comment from named. But I still see the same problem. nslookup knows all the alphabetical host names and all there IP numbers except the two on 192.168.1/24 Using nslookup to test first one of the machines with two nics testing the nic in 192.168.0/24 nslookup reader === Server: 127.0.0.1 Address:127.0.0.1#53 Name: reader.local.lan Address: 192.168.1.2 Name: reader.local.lan Address: 192.168.0.4 It knows reader has two nics and where they are network wise. Now testing the numeric IP nslookup 192.168.0.4 === Server: 127.0.0.1 Address:127.0.0.1#53 4.0.168.192.in-addr.arpaname = reader.local.lan. As expected it works Now try it on 192.168.1/24 ... the 2nd nic on reader. nslookup rdmz === Server: 127.0.0.1 Address:127.0.0.1#53 Name: rdmz.local.lan Address: 192.168.1.2 Good, just what we expected, but now try the numeric IP. nslookup 192.168.1.2 = Server: 127.0.0.1 Address:127.0.0.1#53 ** server can't find 2.1.168.192.in-addr.arpa: NXDOMAIN Gack... what happened? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] vmware and all java applications not running
none of these seemed to work.. i guess i'll try an emerge -e system or reinstall i want to try the new installer anyway On 3/1/06, Richard Fish <[EMAIL PROTECTED]> wrote: > On 3/1/06, Ghaith Hachem <[EMAIL PROTECTED]> wrote: > > hello, > > i have recently noticed that many java application are not running > > anymore like Mercury > > > > $ /fdrive/external/home/angel/1709_Linux_NoVM.bin > > Preparing to install... > > Extracting the installation resources from the installer archive... > > Configuring the installer for this system's environment... > > awk: error while loading shared libraries: libdl.so.2: cannot open > > shared object file: No such file or directory > > dirname: error while loading shared libraries: libc.so.6: cannot open > > shared object file: No such file or directory > > Strange...are you by chance using pre-linking, and forget to run a > "prelink -aq"? > > Or maybe you just need to run "ldconfig" to update the library cache. > > -Richard > > -- > gentoo-user@gentoo.org mailing list > > -- Cheers, Ghaith -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: bind zone.file won't load
Alexander Kirillov <[EMAIL PROTECTED]> writes: > Here's a reverse zone file for my home network. It's 10.10.0/24 > but you'll figure out how to tailor this to your needs. Yikes I promised to post my reverse file based on your example and then mailed my response without including it. You saw the failure: nslookup 192.168.1.2 Server: 127.0.0.1 Address:127.0.0.1#53 ** server can't find 2.1.168.192.in-addr.arpa: NXDOMAIN Here is the zone file: db.192.168.1 $TTL 1D $ORIGIN 0.168.192.IN-ADDR.ARPA. 4 IN SOA reader.local.lan. reader.reader.local.lan. ( 200405190 ; serial 28800 ; refresh (8 hours) 14400 ; retry (4 hours) 2419200; expire (4 weeks) 86400 ; minimum (1 day) ) ; ; Name servers (The name '@' is implied) ; IN NS reader $ORIGIN 1.168.192.IN-ADDR.ARPA. ; ; Addresses point to canonical names ; 2 IN PTR rdmz.local.lan. 1 INPTR fwdmz.local.lan. -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: modules built post kernel install (on the fly)
Holly Bostick <[EMAIL PROTECTED]> writes: > So what Peter meant was ] [...] Yeah thats what I suggested it meant. I added some unnecessary confusion by saying `the very nature of module is that it is not built in'... sorry. Just sloppy thinking here thanks for clearing that up very well. But since my original question was: [How to -ed HP] "Compile a module by itself (not during kernel compile) and insert that module into a running kernel." That would rule out `*' so that's why it confused me. > However, if you compiled the new modules directly into the kernel (by > choosing "*", or compiling a module that has a sub-function that > requires a *), then you would have to install the new bzImage and > reboot, because the bzImage (the kernel) has actually changed. Nothing different really than just compiling a kernel In fact it sounds like the whole process is required for adding a new `loadable' module too, just leaving out the moving of bzImage. And no reboot required. I guess I sort of thought there was some trick way to just compile a module and not do all the linking and grinding of `make' against the whole tree. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: modules built post kernel install (on the fly)
Harry Putnam wrote: I guess I sort of thought there was some trick way to just compile a module and not do all the linking and grinding of `make' against the whole tree. Unless you've done 'make clean' previously, 'make' will only compile required files based on changes you've made to your config. My laptop runs a monolithic kernel with very few modules (PCMCIA and USB hotplugged stuff), but as long as I'm not changing versions, adding or removing features usually only involves compiling a few source files and linking the bzImage. If you just want to build new modules and haven't made any changes to the actual kernel, 'make' can be left out since the bzImage doesn't need rebuilding - 'make modules modules_install' will be sufficient to build and install your newly selected modules. If you've run 'make clean', which removes all previously compiled objects, a monolithic kernel will have to be rebuilt from scratch - but once again, running only 'make modules modules_install' will rebuild all your modules but leave the kernel itself alone. HTH. -- gentoo-user@gentoo.org mailing list
[gentoo-user] sound recording software in gentoo
I wanted to see if there's a way to set up a home recording mini-studio using Linux. In Windoze, there's things like Cubase, Ableton, Reason, Wavelab, etc... What's available in Linux for that purpose (recording, sequencing, mixing, sound effects), and which of those does Gentoo have in the Portage tree? -- gentoo-user@gentoo.org mailing list