Re: [Geoserver-users] Setting up authKey module with external key provider
Did you add the new authentication filter to the filter chains? If not, try to add it to the default one at least. On Wed, Apr 5, 2023 at 5:21 PM Alin State wrote: > Hello all, > > I am trying to get the this working, but I believe I am missing something. > GEOSERVER_VERSION=2.21.1 > > What I did: > 1. I installed the authkey extension (I can see it under server status > then modules) > 2. I have setup the auth filter. (didn't click synchronize) > [image: image.png] > 3. Added that to the default key chain. > 4. I have a server returning just a default json {"name": "admin"} > 5. I have set up a wms layer which I can get from a website using > openlayer. > > > I am not sure what else to do to make this work. I don't see geoserver > doing that authkey filter and not communicating with the key provider > server. > > Thanks in advance, > Alin > -- > > *Alin State* | Software Engineer > +44 (0)7718 612525 > alin.st...@udlive.io > [image: Learn more at https://www.udlive.io] <https://www.udlive.io/> > [image: > Check us out on LinkedIn] <https://www.linkedin.com/company/uda-live/> > > Disclaimer: > > The content of this email is confidential and intended for the recipient > specified in message only. It is strictly forbidden to share any part of > this message with any third party, without a written consent of the sender. > If you received this message by mistake, please reply to this message and > follow with its deletion, so that we can ensure such a mistake does not > occur in the future. > The security of customers and suppliers as a priority. Therefore, we have > put efforts into ensuring that the message is error and virus-free. > Unfortunately, full security of the email cannot be ensured as, despite our > efforts, the data included in emails could be infected, intercepted, or > corrupted. Therefore, the recipient should check the email for threats with > proper software, as the sender does not accept liability for any damage > inflicted by viewing the content of this email. > No employee has the authority to conclude any binding contract without an > explicit written consent of their supervisor. Therefore, any will to > enter into an agreement must be confirmed by a second manager or director. > Any quotation contained is sent to compare available offers and does not > imply entering into a legally binding contract. > Please do not print this email unless it is necessary. Every unprinted > email helps the environment. > The views and opinions included in this email belong to their author and > do not necessarily mirror the views and opinions of the company. Our > employees are obliged not to make any defamatory clauses, infringe, or > authorise infringement of any legal right. Therefore, the company will not > take any liability for such statements included in emails. In case of any > damages or other liabilities arising, employees are fully responsible for > the content of their emails. > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- Regards, Alessio Fabiani == GeoServer Professional Services from the experts! Visit http://bit.ly/gs-services-us for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions Group phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 https://www.geosolutionsgroup.com/ http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protec
Re: [Geoserver-users] geoserver 2.21.2 /gwc inaccessible with geofence server plugin installed
-activated> > GeoServer GWC sending 404 when geofence is activated > <https://gis.stackexchange.com/questions/417999/geoserver-gwc-sending-404-when-geofence-is-activated> > Stack Exchange network consists of 182 Q communities including Stack > Overflow, the largest, most trusted online community for developers to > learn, share their knowledge, and build their careers.. Visit Stack Exchange > gis.stackexchange.com > ** > > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > > -- > -- > Jody Garnett > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- Regards, Alessio Fabiani == GeoServer Professional Services from the experts! Visit http://bit.ly/gs-services-us for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions Group phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 https://www.geosolutionsgroup.com/ http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail. ___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] REST API / deleting an imagemosaic with postgres database
Dear Joffrey, unfortunately this is a known issue and so far there's no official solution for this. I have created a JIRA for reference. Let's keep the discussion there. https://osgeo-org.atlassian.net/browse/GEOS-10554 Alessio. Il giorno lun 20 giu 2022 alle ore 10:20 Joffrey Schmitz < joffrey.schm...@meteo.be> ha scritto: > Hello, > > I have a imagemosaic datastore on Geoserver, that uses a Postgres database > to index the granules, with the following datastore.properties : > SPI=org.geotools.data.postgis.PostgisNGDataStoreFactory > host=localhost > port=5432 > database=geoserver > schema=public > user=user > passwd=passwd > > Loose\ bbox=true > Estimated\ extends=false > validate\ connections=true > Connection\ timeout=10 > preparedStatements=true > > When I try to delete the datastore with the rest API : > DELETE > /rest/workspaces/workspace/coveragestores/store.xml?recurse=true=all > I got the following error : > Caused by: java.io.IOException: Failed to drop the target database > at > org.geotools.data.postgis.PostgisNGDataStoreFactory.dropDatabase(PostgisNGDataStoreFactory.java:401) > ... 118 more > Caused by: org.postgresql.util.PSQLException: ERROR: database "geoserver" > is being accessed by other users > > I don't understand why we try to delete the whole database (even with ' > purge=all'). I expected the method to remove only the table in which the > index was stored. > I have the same behavior with purge=metadata. > > > Is there a way to configure the datastore to keep the database and the > schema intact, and drop only the underlying table ? > > > Kind regards, > > Joffrey > > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > ___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] OAuth2 + OpenID + Token Audience Validation
Hi Felipe, I confirm that currently the oauth2 plugin has no support for AUD in it. On Tue, Jul 27, 2021 at 12:40 AM Felipe Fraga wrote: > Hello all, > > I want to protect GeoServer OWS services with OpenID tokens. The OpenID > filter does the trick, but unfortunately I have a widely used SSO, so I > need to validate the tokens audience ("aud" claim) in JWT. > > I have experimented with it, and it seems to authorize users regardless of > the audience the token was issued for. > > I checked the docs and also took a quick look at the source code but > didn't see any reference to audience checks. > > Is this by design? Am I missing something? > > Thanks for any help you can provide, > > Best regards, > > Felipe Fraga > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- Regards, Alessio Fabiani == GeoServer Professional Services from the experts! Visit http://bit.ly/gs-services-us for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions Group phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 333 8128928 https://www.geosolutionsgroup.com/ http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail. ___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] OpenID Connect pluging gives 404 not found
Dear Bart, I guess it is just an issue of the admin UI session. Try maybe to login/logout from a clean browser session and/or login/logout from the base GeoServer admin gui URL (you can reach that by clicking over the GeoServer logo). On Wed, Jul 7, 2021 at 3:32 PM Bart Zwemmer | GIS Specialisten < b...@gisspecialisten.nl> wrote: > Dear Community, > > > > On a test server I added the OpenID Connect authentication > <https://docs.geoserver.org/stable/en/user/community/oauth2/index.html#openid-connect-authentication> > extension. I then added the configuration through the discovery URL of the > service provider (Azure AD), as can be seen below: > > Originally, this gave a redirect url of localhost:8080/Geoserver, but in > the screenshot I tried already several variations with HTTP and HTTPS. > Other than that, this is a vanilla install of the latest Geoserver WAR > (2.18.4) on Tomcat. Everything else seems to be working fine. > > > > When I try to login through the web interface using the new login button, > it gives me a 404 error. The same when I try to access the logout URL. As > far as I can tell, I followed the instructions for the plugin properly > (first link) as well as the instructions for Azure > <https://docs.microsoft.com/en-us/azure/active-directory/develop/v2-protocols-oidc>. > I posted the problematic URL below, in case you want to experiment. Being > an app service on the free Azure plan, I can’t guarantee it’s always up > though. > > > > > https://gs-with-ad.azurewebsites.net/geoserver/web/j_spring_oauth2_openid_connect_login > > > > --- > > Met vriendelijke groet / Kind regards, > > > > *Bart Zwemmer* > > Technical Manager <https://www.linkedin.com/in/bzwemmer/> > > > > > > *M: +31(0)642 343 911* > > *E: b...@gisspecialisten.nl * > > > > <http://www.gisspecialisten.nl/> > > > Van Deventerlaan 31-51 | 3528 AG Utrecht | +31 (0)85 7 325 825 > > LinkedIn <https://www.linkedin.com/company/gis-specialisten> | Twitter > <https://twitter.com/gisspecialisten> | Facebook > <https://www.facebook.com/gisspecialisten> | Instagram > <https://www.instagram.com/gisspecialisten/> | YouTube > <https://www.youtube.com/channel/UCRTK73l_z99sLP9A_-pE1Xw> | > GeoService.cloud <https://geoservice.cloud/> > > > > *Disclaimer* > De informatie in dit e-mailbericht, inclusief eventuele bijlage(s) is > vertrouwelijk en uitsluitend bestemd voor de geadresseerde(n). Gebruik van > deze informatie door anderen dan de geadresseerde(n) is niet toegestaan. > Openbaarmaking, verspreiding en/of verstrekking van deze informatie aan > derden wordt niet gepermitteerd. Wanneer u dit bericht ten onrechte heeft > ontvangen, dient u de afzender hiervan per e-mail op de hoogte te brengen > en dit bericht te verwijderen. > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- Regards, Alessio Fabiani == GeoServer Professional Services from the experts! Visit http://bit.ly/gs-services-us for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions Group phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 333 8128928 https://www.geosolutionsgroup.com/ http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of t
Re: [Geoserver-users] KeyCloak plugin failing with 500 error
Hi, thanks for the hint. I'll take a look. Alessio. Il giorno mer 21 apr 2021 alle ore 23:04 Spry, Peter TRAN:EX < peter.s...@gov.bc.ca> ha scritto: > Quick follow-up. There's a dependent .jar that was not included in the > https://build.geoserver.org/geoserver/2.19.x/community-latest/geoserver-2.19-SNAPSHOT-sec-keycloak-plugin.zip > gson-2.2.2.jar > > On 2021-04-20, 12:18 PM, "Spry, Peter TRAN:EX" > wrote: > > That was the problem. I grabbed the keycloak jar directly from > sourceforge instead of > https://build.geoserver.org/geoserver/2.19.x/community-latest/ and missed > the other 46 related .jar files. > Thanks Mark. > > On 2021-04-17, 3:35 AM, "mark" wrote: > > [EXTERNAL] This email came from an external source. Only open > attachments or links that you are expecting from a known sender. > > > Op 16-04-2021 om 22:49 schreef Spry, Peter TRAN:EX: > > HTTP ERROR 500 javax.servlet.ServletException: > org.springframework.web.util.NestedServletException: Handler dispatch > failed; nested exception is java.lang.NoClassDefFoundError: > org/keycloak/representations/adapters/config/AdapterConfig > > This indicates Geoserver is missing the keycloak dependency or the > keycloak dependency you usedis out of date and does not provide the > class org/keycloak/representations/adapters/config/AdapterConfig > > Just adding the geoserver jar isn't enough I think, check the > documentation on how to install > > > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before > posting to this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > > > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting > to this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > > > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A - 55054 Massarosa (LU) - Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain info
Re: [Geoserver-users] Upgrading ancient geoserver/geonode
Hi Tim, do you have any chance to retrieve the tomcat logs somehow? Especially the catalina.out and, if possible, also the geoserver.log that should be located under /logs Alessio. Il giorno mar 23 mar 2021 alle ore 18:35 Tim Young ha scritto: > I am helping someone upgrade + migrate a geonode/geoserver instance. > (currently Geonode: 2.4.1 / Geoserver: 2.7.4 on an Ubuntu 14.04 machine, > migrating to something current) The current server has obviously seen a > lot of history (docker is installed, but there are no docker images, > multiple geonode/geoserver directories, etc.) It appears that geonode is > run through wsgi, and geoserver is started through tomcat (not docker). > > We have set up a few clean Ubuntu installs and have tried migrating the > geonode/geoserver stuff to it. Geonode seems to have gone fairly well; > we can see our layer, all 2544 maps, the users, and such. When we try > to move the geoserver data directory across, geoserver will no longer > run. I am not entirely sure how/why it fails; tomcat basically no > longer responds on port 8080, though we once had it responding on 8080, > but the /geoserver url would not give us anything.) This is after > restart tomcat after moving the old geoserver data directory across. > > Basically, we do the advanced install, get everything functional up to > the point where we switch to postgres. We get that working also. Then > we import our database and do the 2.4 -> 2.10 geonode data upgrade. > That works. Then we try to do the geoserver data directory migration > (copying the geoserver data dir on top of the data dir, or moving the > working one to the side and replacing it with the old one.) It fails at > this point, and tomcat basically no longer starts until we put the clean > geoserver data directory back. > > We have done this using the advanced install (not docker, yet, but would > prefer to keep it out of docker if we can help it.). We have done it > with geonode 2.10 on Ubuntu 16.04 and geonode 3.x on Ubuntu 20.04. > > Things I know are different between our two servers: > > the old 2.4.1 geoserver data file locations are distinctly different > from the 3.x locations (/usr/share/geoserver/data vs > /opt/data/geoserver_data), and the IP addresses of the servers are > different. We did import the postgresql databases across, and the > usernames/passwords should be the same on both sides. > > The process for starting django seems to have changed substantially, > from wsgi to uwsgi. I understand uwsgi a lot better than how things are > run under wsgi (I do not see how the old 2.4.1 environment was set up, > and how the "paver start_django" was triggered on the old server). > > Anyway. I am at a bit of a loss as to where to go next, or where I > should "begin". > > I am an OK Linux techie; I can follow directions or improvise as > directed. I am not the geoserver / geonode guru, so I do not know much > about the maps and system (though I can ask the mapping users about them). > > - Tim Young > > > > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A - 55054 Massarosa (LU) - Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain informat
Re: [Geoserver-users] Backup restore error storing GeoServer security and services settings
Ah ok, very good, thanks Andrea. Last time I checked it didn't work. Cheers, A. Il giorno sab 16 mag 2020 alle ore 10:26 Andrea Aime < andrea.a...@geo-solutions.it> ha scritto: > On Sat, May 16, 2020 at 1:03 AM Alessio Fabiani < > alessio.fabi...@geo-solutions.it> wrote: > >> Hi Alec, >> which version of GeoServer are you using? >> >> Also I strongly suggest to use the backup plugin from here: >> >> http://maven.geo-solutions.it/org/geoserver/community/gs-backup-restore/ >> >> those ones are the most updated ones. Unfortunately the GeoServer >> automatic build does not re-build Community plugins. >> > > What? That is news to me. I see it here: > https://build.geoserver.org/geoserver/master/community-latest/ > https://build.geoserver.org/geoserver/2.17.x/community-latest/ > https://build.geoserver.org/geoserver/2.16.x/community-latest/ > > The issues due to the build server migration should be all gone now > > Cheers > Andrea > > == GeoServer Professional Services from the experts! Visit > http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf > Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa > (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 > http://www.geo-solutions.it http://twitter.com/geosolutions_it > --- *Con riferimento > alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - > Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni > circostanza inerente alla presente email (il suo contenuto, gli eventuali > allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i > destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per > errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le > sarei comunque grato se potesse darmene notizia. This email is intended > only for the person or entity to which it is addressed and may contain > information that is privileged, confidential or otherwise protected from > disclosure. We remind that - as provided by European Regulation 2016/679 > “GDPR” - copying, dissemination or use of this e-mail or the information > herein by anyone other than the intended recipient is prohibited. If you > have received this email by mistake, please notify us immediately by > telephone or e-mail.* > -- == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A - 55054 Massarosa (LU) - Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail. ___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Backup restore error storing GeoServer security and services settings
expectedJobExecutionException: > Exception occurred while storing GeoServer security and services settings! > at > org.geoserver.backuprestore.tasklet.CatalogSecurityManagerTasklet.doExecute(CatalogSecurityManagerTasklet.java:147) > at > org.geoserver.backuprestore.tasklet.AbstractCatalogBackupRestoreTasklet$4.call(AbstractCatalogBackupRestoreTasklet.java:207) > at > org.geoserver.backuprestore.tasklet.AbstractCatalogBackupRestoreTasklet$4.call(AbstractCatalogBackupRestoreTasklet.java:203) > at > java.base/java.util.concurrent.FutureTask.run(FutureTask.java:264) > ... 1 more > Caused by: java.lang.RuntimeException: > org.geoserver.security.xml.XMLSecurityConfigException: Password policy > default already exists > at > org.geoserver.security.GeoServerSecurityManager.reload(GeoServerSecurityManager.java:415) > at > org.geoserver.backuprestore.tasklet.CatalogSecurityManagerTasklet.doExecute(CatalogSecurityManagerTasklet.java:141) > ... 4 more > Caused by: org.geoserver.security.xml.XMLSecurityConfigException: Password > policy default already exists > at > org.geoserver.security.xml.XMLSecurityConfigValidator.createSecurityException(XMLSecurityConfigValidator.java:177) > at > org.geoserver.security.validation.SecurityConfigValidator.validateAddNamedService(SecurityConfigValidator.java:322) > at > org.geoserver.security.validation.SecurityConfigValidator.validateAddPasswordPolicy(SecurityConfigValidator.java:355) > at > org.geoserver.security.GeoServerSecurityManager.savePasswordPolicy(GeoServerSecurityManager.java:1083) > at > org.geoserver.security.GeoServerSecurityManager.migrateFrom21(GeoServerSecurityManager.java:2133) > at > org.geoserver.security.GeoServerSecurityManager.reload(GeoServerSecurityManager.java:399) > ... 5 more > > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A - 55054 Massarosa (LU) - Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail. ___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Community notification module breaks WFS editing
Hi Tobias, I am currently the responsible of that module. I'll take a look as soon as I can. Alessio. Il giorno ven 28 feb 2020 alle ore 01:35 Tobias Schulmann < tob...@catalyst.net.nz> ha scritto: > Hi > > I'm not sure where the right place to raise issues with community modules > is - > > The `notification` community module breaks the ability to edit layers > through WFS when installed in GeoServer 2.16.2 (2.15.x works fine). We've > tested this with a clean GeoServer + notification extension, and receive > the following stack trace: > https://gist.github.com/GeoTob/41b3535866aa3fc4d13c75fe359bd941 > > The module itself seems to work fine, however WFS editing is a pretty > important feature for us. Any ideas would be appreciated. > > Cheers > Tobias > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A - 55054 Massarosa (LU) - Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail. ___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Keycloak Roles
Hello Andrew, in theory the role should be mapped to the user. You shouldn't need a new role service. Have you assigned the new role to the user on Keycloak "geoserver-cleint" as shown at point 4? Il giorno mar 21 gen 2020 alle ore 13:24 Andrew Chamberlain via Geoserver-users ha scritto: > Hi All, > > I'm in the process of integrating Keycloak in the manner described here: > > https://docs.geoserver.org/latest/en/user/community/keycloak/index.html > > This all works fine, but when I'm getting unexpected results when adding > further roles to protect individual layers. Having added the new role in > both Keycloak and Geoserver, and then a rule to give that role read access > to a particulat layer, the layer in question *disappears* from the layer > preview, rather than being the only one available. The Keycloak user being > used to login has the role mapped to them, and their name appears in the > top-right to indicate Geoserver has picked up the identity. > > The roles must be getting passed, as the use of ROLE_AUTHENTICATED > wouldn't work otherwise. Do I need to add a Role Service, in addition to > the Keycloak Adapter? > > Any help would be much appreciated. > > Many thanks, > > Andy > > Geoserver 2.15.2 > Keycloak 4.8.13 > > > > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A - 55054 Massarosa (LU) - Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail. ___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Geoserver Keycloak authentication
Very good Samy, thanks for your effort and time. If you want (and most importantly you have time and resources to do it), you could envisage to improve and update the existing documentation. Otherwise, I can take care of this, but not now, since I am quite busy. Probably in one month or two. Cheers, Alessio. Il giorno lun 28 ott 2019 alle ore 18:17 Samy Otero ha scritto: > Hi all, > > I finally got it working, here the configuration/set up I used in case > anyone else needs it. > > I installed keycloak-plugin, downloaded from here ( > https://build.geoserver.org/geoserver/2.16.x/community-latest/). > I followed this tutorial ( > https://docs.geoserver.org/stable/en/user/community/keycloak/index.html) > with some variations. > > Keycloak config: > - The Access type set to confidential. > - Standard Flow Enabled set to on > - Implicit Flow Enabled set to on > - Direct Access Grant Enabled set to on > - Only one Valid Redirect URIs, in my case, was > http://localhost:8093/geoserver/web/* (my local geoserver). > - Base URL same as the redirect url without the * at the end, ( > http://localhost:8093/geoserver/web/ ). > > [image: keycloak.PNG] > > > Geoserver config: > - When creating the new authentication filter for keycloak instead of > using the suggested json config I used the one as follow: > > { > "realm": "EGIS", > "auth-server-url": "http://192.168.23.28:9001/auth;, > "ssl-required": "external", > "resource": "geoserver", > "credentials": { > "secret": "your-secret-here" > }, > "use-resource-role-mappings": true, > "confidential-port": 0 > } > > - Next is to click on web filter chain and remove all the chain filters > and add the new keycloak filter. > - Then just restart your server. > > This are the steps that worked for me. > > Hope it helps. > > Cheers > > > > > On Mon, Oct 28, 2019 at 12:39 PM Samy Otero wrote: > >> Hi all, >> >> I got the redirections working, but now there is a small error I've been >> trying to solve for a while now. >> >> When I hit the geoserver login page, it redirects me to the keycloak >> login page, after typing the credentials, it tries to redirect back to the >> geoserver but it hangs in a white page. >> I checked the logs and there is an error in the state parameter (state >> parameter invalid). >> >> Again, any help would be appreciated. >> >> Thanks in advance. >> >> Sam >> >> On Fri, Oct 25, 2019 at 11:00 AM Samy Otero wrote: >> >>> Great, thanks! >>> >>> Super helpful. >>> >>> Cheers >>> >>> On Fri, Oct 25, 2019 at 10:59 AM Alessio Fabiani < >>> alessio.fabi...@geo-solutions.it> wrote: >>> >>>> In theory just creating a new client would be sufficient. >>>> >>>> Il giorno ven 25 ott 2019 alle ore 16:51 Samy Otero >>>> ha scritto: >>>> >>>>> Just to confirm, >>>>> >>>>> - I need to set in the filter chain section my 'keycloak' adaptor >>>>> (without the 'form' adaptor). >>>>> - Login by accessing directly to Keycloak, using the geoserver >>>>> credentials and it should redirect back to the geoserver. >>>>> >>>>> Do I need to have an independent REALM in keycloak for the geoserver >>>>> or I can just create a new client in whatever REALM I'm using? >>>>> >>>>> Thanks!!! >>>>> >>>>> On Fri, Oct 25, 2019 at 10:44 AM Alessio Fabiani < >>>>> alessio.fabi...@geo-solutions.it> wrote: >>>>> >>>>>> Ok, so, in the case you have both Keycloak and Form authentication >>>>>> methods, the login won't redirect you to Keycloak. >>>>>> >>>>>> You will need to go **directly** to the keycloak realm login page. >>>>>> Once you log successfully, it will redirect you to the GeoServer GUI. >>>>>> >>>>>> Il giorno ven 25 ott 2019 alle ore 16:40 Samy Otero < >>>>>> sot...@psdrcs.com> ha scritto: >>>>>> >>>>>>> Apologies, I pasted the wrong link. >>>>>>> >>>>>>> This is the one >>>>>>> https://docs.geoserver.org/stable/en/user/community/keycloak/index.html >>>>>>> >>>>>>> >>>>>>&
Re: [Geoserver-users] Geoserver Keycloak authentication
In theory just creating a new client would be sufficient. Il giorno ven 25 ott 2019 alle ore 16:51 Samy Otero ha scritto: > Just to confirm, > > - I need to set in the filter chain section my 'keycloak' adaptor > (without the 'form' adaptor). > - Login by accessing directly to Keycloak, using the geoserver > credentials and it should redirect back to the geoserver. > > Do I need to have an independent REALM in keycloak for the geoserver or I > can just create a new client in whatever REALM I'm using? > > Thanks!!! > > On Fri, Oct 25, 2019 at 10:44 AM Alessio Fabiani < > alessio.fabi...@geo-solutions.it> wrote: > >> Ok, so, in the case you have both Keycloak and Form authentication >> methods, the login won't redirect you to Keycloak. >> >> You will need to go **directly** to the keycloak realm login page. Once >> you log successfully, it will redirect you to the GeoServer GUI. >> >> Il giorno ven 25 ott 2019 alle ore 16:40 Samy Otero >> ha scritto: >> >>> Apologies, I pasted the wrong link. >>> >>> This is the one >>> https://docs.geoserver.org/stable/en/user/community/keycloak/index.html >>> >>> >>> Thanks for the rapid response. >>> >>> Sam >>> >>> On Fri, Oct 25, 2019 at 10:22 AM Alessio Fabiani < >>> alessio.fabi...@geo-solutions.it> wrote: >>> >>>> Hello Samy, >>>> just to be sure, which tutorial are you following exactly? >>>> >>>> the specific to keycloak (and the right one) which is >>>> >>>> https://docs.geoserver.org/stable/en/user/community/keycloak/index.html >>>> >>>> >>>> or the more general one, for OAuth2, which is >>>> >>>> https://docs.geoserver.org/stable/en/user/community/oauth2/index.html >>>> >>>> Which steps you did exactly? >>>> >>>> >>>> Il giorno ven 25 ott 2019 alle ore 16:05 Samy Otero >>>> ha scritto: >>>> >>>>> Hi all, >>>>> >>>>> I am having issues trying to set up authentication in GeoServer using >>>>> Keyloak community plugin. >>>>> >>>>> I am running GeoServer v 2.16.x and I downloaded the Keycloak plugin >>>>> from here ( >>>>> https://build.geoserver.org/geoserver/2.16.x/community-latest/). >>>>> >>>>> This is the tutorial I am following ( >>>>> https://docs.geoserver.org/stable/en/user/community/oauth2/index.html >>>>> ). >>>>> >>>>> >>>>> The issue: >>>>> >>>>> After configuring everything, when I navigate to the login page, it >>>>> never redirects me to Keycloak, it seems to not be working at all. >>>>> >>>>> I also checked this thread ( >>>>> https://sourceforge.net/p/geoserver/mailman/message/36775455/) but >>>>> it's not the same issue. In that case, there was a redirection happening. >>>>> >>>>> Any help would be much appreciated. >>>>> >>>>> Regards, >>>>> Sam >>>>> >>>>> -- >>>>> Samy Otero >>>>> >>>>> *PSD |* Software Developer >>>>> >>>>> www.psdrcs.com >>>>> >>>>> *London |* 148 Fullarton St. 9th floor. >>>>> >>>>> *Burlington |* 5045 South Service Rd. >>>>> >>>>> >>>>> >>>>> ___ >>>>> Geoserver-users mailing list >>>>> >>>>> Please make sure you read the following two resources before posting >>>>> to this list: >>>>> - Earning your support instead of buying it, but Ian Turton: >>>>> http://www.ianturton.com/talks/foss4g.html#/ >>>>> - The GeoServer user list posting guidelines: >>>>> http://geoserver.org/comm/userlist-guidelines.html >>>>> >>>>> If you want to request a feature or an improvement, also see this: >>>>> https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer >>>>> >>>>> >>>>> Geoserver-users@lists.sourceforge.net >>>>> https://lists.sourceforge.net/lists/listinfo/geoserver-users >>>>> >>>> >>>> >>&g
Re: [Geoserver-users] Geoserver Keycloak authentication
Ok, so, in the case you have both Keycloak and Form authentication methods, the login won't redirect you to Keycloak. You will need to go **directly** to the keycloak realm login page. Once you log successfully, it will redirect you to the GeoServer GUI. Il giorno ven 25 ott 2019 alle ore 16:40 Samy Otero ha scritto: > Apologies, I pasted the wrong link. > > This is the one > https://docs.geoserver.org/stable/en/user/community/keycloak/index.html > > Thanks for the rapid response. > > Sam > > On Fri, Oct 25, 2019 at 10:22 AM Alessio Fabiani < > alessio.fabi...@geo-solutions.it> wrote: > >> Hello Samy, >> just to be sure, which tutorial are you following exactly? >> >> the specific to keycloak (and the right one) which is >> >> https://docs.geoserver.org/stable/en/user/community/keycloak/index.html >> >> or the more general one, for OAuth2, which is >> >> https://docs.geoserver.org/stable/en/user/community/oauth2/index.html >> >> Which steps you did exactly? >> >> >> Il giorno ven 25 ott 2019 alle ore 16:05 Samy Otero >> ha scritto: >> >>> Hi all, >>> >>> I am having issues trying to set up authentication in GeoServer using >>> Keyloak community plugin. >>> >>> I am running GeoServer v 2.16.x and I downloaded the Keycloak plugin >>> from here ( >>> https://build.geoserver.org/geoserver/2.16.x/community-latest/). >>> >>> This is the tutorial I am following ( >>> https://docs.geoserver.org/stable/en/user/community/oauth2/index.html). >>> >>> >>> The issue: >>> >>> After configuring everything, when I navigate to the login page, it >>> never redirects me to Keycloak, it seems to not be working at all. >>> >>> I also checked this thread ( >>> https://sourceforge.net/p/geoserver/mailman/message/36775455/) but it's >>> not the same issue. In that case, there was a redirection happening. >>> >>> Any help would be much appreciated. >>> >>> Regards, >>> Sam >>> >>> -- >>> Samy Otero >>> >>> *PSD |* Software Developer >>> >>> www.psdrcs.com >>> >>> *London |* 148 Fullarton St. 9th floor. >>> >>> *Burlington |* 5045 South Service Rd. >>> >>> >>> >>> ___ >>> Geoserver-users mailing list >>> >>> Please make sure you read the following two resources before posting to >>> this list: >>> - Earning your support instead of buying it, but Ian Turton: >>> http://www.ianturton.com/talks/foss4g.html#/ >>> - The GeoServer user list posting guidelines: >>> http://geoserver.org/comm/userlist-guidelines.html >>> >>> If you want to request a feature or an improvement, also see this: >>> https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer >>> >>> >>> Geoserver-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/geoserver-users >>> >> >> >> -- >> >> == >> >> GeoServer Professional Services from the experts! Visit >> http://goo.gl/it488V for more information. >> == >> Ing. Alessio Fabiani >> >> @alfa7691 >> Founder/Technical Lead >> >> >> GeoSolutions S.A.S. >> Via di Montramito 3/A - 55054 Massarosa (LU) - Italy >> phone: +39 0584 962313 >> fax: +39 0584 1660272 >> mob: +39 331 6233686 >> >> >> http://www.geo-solutions.it >> http://twitter.com/geosolutions_it >> --- >> >> Con riferimento alla normativa sul trattamento dei dati personali (Reg. >> UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si >> precisa che ogni circostanza inerente alla presente email (il suo >> contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è >> riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il >> messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra >> operazione è illecita. Le sarei comunque grato se potesse darmene notizia. >> >> >> This email is intended only for the person or entity to which it is >> addressed and may contain information that is privileged, confidential or >> otherwise protected from disclosure. We remind that - as provided by >> European Regulation 2016/679 “GDPR” - copying, dissemi
Re: [Geoserver-users] Geoserver Keycloak authentication
Hello Samy, just to be sure, which tutorial are you following exactly? the specific to keycloak (and the right one) which is https://docs.geoserver.org/stable/en/user/community/keycloak/index.html or the more general one, for OAuth2, which is https://docs.geoserver.org/stable/en/user/community/oauth2/index.html Which steps you did exactly? Il giorno ven 25 ott 2019 alle ore 16:05 Samy Otero ha scritto: > Hi all, > > I am having issues trying to set up authentication in GeoServer using > Keyloak community plugin. > > I am running GeoServer v 2.16.x and I downloaded the Keycloak plugin from > here (https://build.geoserver.org/geoserver/2.16.x/community-latest/). > > This is the tutorial I am following ( > https://docs.geoserver.org/stable/en/user/community/oauth2/index.html). > > > The issue: > > After configuring everything, when I navigate to the login page, it never > redirects me to Keycloak, it seems to not be working at all. > > I also checked this thread ( > https://sourceforge.net/p/geoserver/mailman/message/36775455/) but it's > not the same issue. In that case, there was a redirection happening. > > Any help would be much appreciated. > > Regards, > Sam > > -- > Samy Otero > > *PSD |* Software Developer > > www.psdrcs.com > > *London |* 148 Fullarton St. 9th floor. > > *Burlington |* 5045 South Service Rd. > > > > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A - 55054 Massarosa (LU) - Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail. ___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Keycloak with geoserver 403 error
Hi Nikola, it looks good to me. Thank you very much. Alessio. Il giorno ven 18 ott 2019 alle ore 16:10 Nikola Jankovic < nikola.janko...@eodc.eu> ha scritto: > Hey all, > > I have submitted the PR @ https://github.com/geoserver/geoserver/pull/3837 > > I hope this is enough & if you need more info just let me know. > > Cheers, > Nikola > ---------- > *From:* Alessio Fabiani > *Sent:* 18 October 2019 15:09 > *To:* Andrea Aime > *Cc:* Alessio Fabiani ; Nikola Jankovic > ; geoserver-users@lists.sourceforge.net < > geoserver-users@lists.sourceforge.net> > *Subject:* Re: [Geoserver-users] Keycloak with geoserver 403 error > > Thanks Nikola and Andrea, > I created a JIRA issue to keep track of the change > > https://osgeo-org.atlassian.net/browse/GEOS-9372 > > The Pull Request should title something like this: > > [GEOS-9372] Community Keycloack plugin doc is incomplete > > Regards, > Alessio. > > > > Il giorno ven 18 ott 2019 alle ore 15:01 Andrea Aime < > andrea.a...@geo-solutions.it> ha scritto: > > On Fri, Oct 18, 2019 at 2:58 PM Alessio Fabiani < > alessio.fabi...@geo-solutions.it> wrote: > > Any chance for you to make a Pull Request on GeoServer with the updates to > the docs so that we can review them? > > > If it's small changes, this would help: > https://docs.geoserver.org/latest/en/docguide/quickfix.html > Otherwise see the full doc guide: > https://docs.geoserver.org/latest/en/docguide/index.html > > Cheers > Andrea > > == > > GeoServer Professional Services from the experts! Visit > http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf > Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa > (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 > http://www.geo-solutions.it http://twitter.com/geosolutions_it > --- *Con riferimento > alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - > Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni > circostanza inerente alla presente email (il suo contenuto, gli eventuali > allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i > destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per > errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le > sarei comunque grato se potesse darmene notizia. This email is intended > only for the person or entity to which it is addressed and may contain > information that is privileged, confidential or otherwise protected from > disclosure. We remind that - as provided by European Regulation 2016/679 > “GDPR” - copying, dissemination or use of this e-mail or the information > herein by anyone other than the intended recipient is prohibited. If you > have received this email by mistake, please notify us immediately by > telephone or e-mail.* > > > > -- > > == > > GeoServer Professional Services from the experts! Visit > http://goo.gl/it488V for more information. > == > Ing. Alessio Fabiani > > @alfa7691 > Founder/Technical Lead > > > GeoSolutions S.A.S. > Via di Montramito 3/A - 55054 Massarosa (LU) - Italy > phone: +39 0584 962313 > fax: +39 0584 1660272 > mob: +39 331 6233686 > > > http://www.geo-solutions.it > http://twitter.com/geosolutions_it > --- > > Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE > 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si > precisa che ogni circostanza inerente alla presente email (il suo > contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è > riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il > messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra > operazione è illecita. Le sarei comunque grato se potesse darmene notizia. > > > This email is intended only for the person or entity to which it is > addressed and may contain information that is privileged, confidential or > otherwise protected from disclosure. We remind that - as provided by > European Regulation 2016/679 “GDPR” - copying, dissemination or use of this > e-mail or the information herein by anyone other than the intended > recipient is prohibited. If you have received this email by mistake, please > notify us immediately by telephone or e-mail. > -- == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A - 55054 Massarosa (LU) - Italy phone: +
Re: [Geoserver-users] Keycloak with geoserver 403 error
Thanks Nikola and Andrea, I created a JIRA issue to keep track of the change https://osgeo-org.atlassian.net/browse/GEOS-9372 The Pull Request should title something like this: [GEOS-9372] Community Keycloack plugin doc is incomplete Regards, Alessio. Il giorno ven 18 ott 2019 alle ore 15:01 Andrea Aime < andrea.a...@geo-solutions.it> ha scritto: > On Fri, Oct 18, 2019 at 2:58 PM Alessio Fabiani < > alessio.fabi...@geo-solutions.it> wrote: > >> Any chance for you to make a Pull Request on GeoServer with the updates >> to the docs so that we can review them? >> > > If it's small changes, this would help: > https://docs.geoserver.org/latest/en/docguide/quickfix.html > Otherwise see the full doc guide: > https://docs.geoserver.org/latest/en/docguide/index.html > > Cheers > Andrea > > == > > GeoServer Professional Services from the experts! Visit > http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf > Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa > (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 > http://www.geo-solutions.it http://twitter.com/geosolutions_it > --- *Con riferimento > alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - > Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni > circostanza inerente alla presente email (il suo contenuto, gli eventuali > allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i > destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per > errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le > sarei comunque grato se potesse darmene notizia. This email is intended > only for the person or entity to which it is addressed and may contain > information that is privileged, confidential or otherwise protected from > disclosure. We remind that - as provided by European Regulation 2016/679 > “GDPR” - copying, dissemination or use of this e-mail or the information > herein by anyone other than the intended recipient is prohibited. If you > have received this email by mistake, please notify us immediately by > telephone or e-mail.* > -- == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A - 55054 Massarosa (LU) - Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail. ___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Keycloak with geoserver 403 error
Hello Nikola, sorry for the late reply and thanks for having dug into this issue. So, as far as I understand, it is more matter of configuration right? And it looks like the documentation is incomplete or not clear enough, am I right? Any chance for you to make a Pull Request on GeoServer with the updates to the docs so that we can review them? If you confirm this, I will open a JIRA Issues which can be linked to the PR later on. Please let me know, Alessio. Il giorno ven 18 ott 2019 alle ore 13:40 Nikola Jankovic < nikola.janko...@eodc.eu> ha scritto: > Hey all, > > I have discovered what is the issue. Apparently the module doesn't > recognize some of the token decryption algorithms, and I solved the issue > by forcing RS256 on the client and including the *realm-public-key *for > RS256 in the adapter config which is located in keycloak realm settings. > This isn't mentioned in the documentation though. Any way to proceed with > this? > > Cheers, > Nikola > -- > *From:* Nikola Jankovic > *Sent:* 16 October 2019 13:54 > *To:* geoserver-users@lists.sourceforge.net < > geoserver-users@lists.sourceforge.net> > *Subject:* [Geoserver-users] Keycloak with geoserver 403 error > > Hello all, > > I am trying to run keycloak & geoserver locally, but no matter what I try > (also tried a bunch of other things besides using the guide here > https://docs.geoserver.org/latest/en/user/community/keycloak/index.html) > I always get 403 after logging in to geoserver from keycloak. A successful > session & login are logged in keycloak, but I don't get access to the GUI > which, at first, I am trying to protect. I know it is a community module > and experimental, but has anyone had any success setting it up? Any help > would be greatly appreciated. Not sure also whether this might be a bug. > > Specs: > Geoserver 2.15.0 running in a docker Container > openjdk version "1.8.0_212" > OpenJDK Runtime Environment (build 1.8.0_212-8u212-b01-1~deb9u1-b01) > OpenJDK 64-Bit Server VM (build 25.212-b01, mixed mode) > > I tried changing roles, mapping roles, disabling ssl fully, changing flows > within keycloak & tried to replicate the user in geoserver but always 403. > > Thanks in advance. > > Cheers, > Nikola > > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A - 55054 Massarosa (LU) - Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail. ___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement
Re: [Geoserver-users] GeoFence
Hi Neil, you should be able to download it from here https://build.geoserver.org/geoserver/2.14.x/community-latest/ nevertheless, I remember the zip file should be missing one GeoFence core JAR. If you have issues running GeoServer, send an email to the mailing list. Il giorno ven 15 feb 2019 alle ore 07:11 Neil Saunders < neil.saund...@lotsearch.com.au> ha scritto: > Hi folks, > > > > How can I find the correct version of the GeoFence extension for Geoserver > 2.14.1? > > > > Thanks! > > > > > > [image: cid:image001.png@01D3A972.C9540910] > > > > *Neil Saunders* > Lotsearch Pty Ltd > Level 3, 68 Alfred Street > > Milsons Point, NSW 2061 > > > > > > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > ___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Possible bug with printing plugin?
a/o a cancellarlo, ogni altra operazione è illecita. Le > sarei comunque grato se potesse darmene notizia. This email is intended > only for the person or entity to which it is addressed and may contain > information that is privileged, confidential or otherwise protected from > disclosure. We remind that - as provided by European Regulation 2016/679 > “GDPR” - copying, dissemination or use of this e-mail or the information > herein by anyone other than the intended recipient is prohibited. If you > have received this email by mistake, please notify us immediately by > telephone or e-mail.* > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A - 55054 Massarosa (LU) - Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail. ___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
[Geoserver-users] Pushing forward GSIP 169 - WPS Extension
Dear all, that GSIP is around from a while. There was a good thread were improvements to the proposal have been discussed and applied accordingly [1] I'm going to ask people to have a final look and to PSC to cast votes. Best regards and thanks, Alessio. [1] http://osgeo-org.1560.x6.nabble.com/Pre-Proposal-WPS-Extension-quot-GetExecutions-quot-Operation-td5371150.html -- == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A - 55054 Massarosa (LU) - Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail. -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Geoserver Mapfish: how to print in multiple pages?
than the page (for instance > because you didn't scale an image). > at com.itextpdf.text.pdf.PdfDocument.add(PdfDocument.java:786) > at com.itextpdf.text.Document.add(Document.java:278) > at org.mapfish.print.config.layout.Page$1.add(Page.java:76) > at org.mapfish.print.config.layout.MapBlock.render(MapBlock.java:81) > at org.mapfish.print.config.layout.Page.render(Page.java:73) > at org.mapfish.print.config.layout.MainPage.render(MainPage.java:63) > at org.mapfish.print.config.layout.Layout.render(Layout.java:59) > at > org.mapfish.print.output.AbstractOutputFormat.doPrint(AbstractOutputFormat.java:30) > at > org.mapfish.print.output.PdfOutputFactory.print(PdfOutputFactory.java:58) > > What is my problem? > > Thanks, > Fawzy > > -- > Securely sent with Tutanota. Claim your encrypted mailbox today! > https://tutanota.com > > 5. Aug 2018 06:28 by br...@frogmouth.net: > > I’m not at all familiar with this, but how have you defined the pages part > of the {SPEC} you’re using? > > > > More generally, what have you already tried, what happened, and what were > you expecting to happen instead? > > > > Brad > > > > *From:* faw...@tutamail.com > *Sent:* Saturday, 4 August 2018 9:27 PM > *To:* Geoserver Users > *Subject:* [Geoserver-users] Geoserver Mapfish: how to print in multiple > pages? > > > > Hi all, > > I need to print a large map with a high resolution. > > I wonder is it possible to print such a map in more than one page? and how? > > I've tested the Mapfish Printing Demo that comes with Geoserver admin > page, but it only print in one page, even if I enlarge the map extent and > resolution. > > > > Regards, > > Fawzy > > > > > -- > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A - 55054 Massarosa (LU) - Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail. -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] [Geoserver-devel] GSIP 169 - WPS Extension "GetExecutions" Operation
Thanks Andrea for your feedbacks, well noted. I'm going to update the GSIP accordingly to our constructive discussion. Il giorno mar 14 ago 2018 alle ore 18:56 Andrea Aime < andrea.a...@geo-solutions.it> ha scritto: > Hi Alessio, > feedback inline. > > On Tue, Aug 14, 2018 at 5:32 PM Alessio Fabiani < > alessio.fabi...@geo-solutions.it> wrote: > >> 1. "How do you compute the estimated completion and the next poll? Do >> they need a API change in the WPS core?" >> >> My original idea was that this remains an optional parameter, therefore >> no need to implement for every process nor to change the core itself. >> It should be used only for processes which somehow can be predicted. >> I just wanted to give to someone the possibility to tell to the client >> that the process might take a certain amount of time in case this could be >> estimated somehow. >> I envision this one more useful on specific extensions or external >> processes which have a computational method to estimate their completion. >> > > Well I guess for the simple case one could use "time elapsed / percentage > complete" and then roll new extension points in case > the process or their factory have a better way. > > >> 3. "When does a GetExecutions request throw a DataNotAccessible, >> ServerBusy, or WrongInputData >> exception?" >> >> I envisaged those types of exceptions in order to cover some possible use >> cases especially when trying to retrieve the whole list of input/outputs >> values through the "lineage" option. >> >> In particular: >> >> - DataNotAccessible; should be thrown in the unlucky cases that the >> associated execution folder has been removed or it is somehow unaccessible >> - ServerBusy; might be thrown in the case GeoServer is locked and it is >> not temporarily able to retrieve some input values (I'm not fully sure if >> this could happens though) >> > > Not really, it should not. > > >> - WrongInputData; originally I thought this should be thrown in the case >> someone tried to run an execution with wrong input values and therefore the >> process failed. I'm not fully sure here how the "lineage" option could >> manage this however. Any comment? >> > > Mind, even using "lineage" the "input data" is not necessarily there. To > give you an example, if the request asked an external WFS for input > data, all that's found in the lineage is the WFS request itself, not the > result of it. > What the lineage stores is actually the original request in its full > form... if it happened to have the inputs inline, they should still be > there. > > Cheers > Andrea > > == > > GeoServer Professional Services from the experts! Visit > http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf > Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa > (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 > http://www.geo-solutions.it http://twitter.com/geosolutions_it > --- *Con riferimento > alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - > Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni > circostanza inerente alla presente email (il suo contenuto, gli eventuali > allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i > destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per > errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le > sarei comunque grato se potesse darmene notizia. This email is intended > only for the person or entity to which it is addressed and may contain > information that is privileged, confidential or otherwise protected from > disclosure. We remind that - as provided by European Regulation 2016/679 > “GDPR” - copying, dissemination or use of this e-mail or the information > herein by anyone other than the intended recipient is prohibited. If you > have received this email by mistake, please notify us immediately by > telephone or e-mail.* > -- == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A - 55054 Massarosa (LU) - Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla prote
Re: [Geoserver-users] GeoServer 2.13.0 importer- updating a task?
Hello, yes please, open a JIRA about that along with logs and, possibly, instructions to reproduce. Thanks, Alessio. Il giorno gio 16 ago 2018 alle ore 03:25 mortac8 ha scritto: > Would this qualify as a bug? I can make a Jira issue for it if that would > help. Thanks! > > > mortac8 wrote > > Hello all! I am getting an error in GeoServer 2.13.0 when I am trying to > > update a task via the Importer REST API. > > > > Basically, my goal is for my Importer to always 'REPLACE' to handle the > > case if the user imports an updated file with the same name but updated > > data. I was trying to just set all my Tasks to be update mode: "REPLACE" > > but that gives me the confusing error below. Can anyone provide any tips > > or ideas? Thanks so much!! > > > > > > 13 Aug 18:43:10 ERROR [geoserver.rest] - com.sun.proxy.$Proxy27 cannot be > > cast to org.geoserver.catalog.impl.LayerInfoImpl > > java.lang.ClassCastException: com.sun.proxy.$Proxy27 cannot be cast to > > org.geoserver.catalog.impl.LayerInfoImpl > > at > > > org.geoserver.importer.rest.ImportTaskController.updateLayer(ImportTaskController.java:442) > > at > > > org.geoserver.importer.rest.ImportTaskController.handleTaskPut(ImportTaskController.java:364) > > at > > > org.geoserver.importer.rest.ImportTaskController.lambda$taskPut$4(ImportTaskController.java:167) > > at > > > org.geoserver.importer.rest.converters.ImportWrapperMessageConverter.writeJSON(ImportWrapperMessageConverter.java:84) > > at > > > org.geoserver.importer.rest.converters.ImportWrapperMessageConverter.writeInternal(ImportWrapperMessageConverter.java:67) > > at > > > org.geoserver.importer.rest.converters.ImportWrapperMessageConverter.writeInternal(ImportWrapperMessageConverter.java:26) > > at > > > org.springframework.http.converter.AbstractHttpMessageConverter.write(AbstractHttpMessageConverter.java:227) > > > > > > POST http://localhost:12121/geoserver/rest/imports > > > {"import":{"targetWorkspace":{"workspace":{"name":"myWorkspace"}},"data":{"type":"file","file":"D:\\testdata\\CIB.gpkg"}}} > > > > { > > "import": { > > "id": 24, > > "href": "http://localhost:12121/geoserver/rest/imports/24;, > > "state": "PENDING", > > "archive": false, > > "targetWorkspace": { > > "workspace": { > > "name": " myWorkspace ", > > "isolated": false > > } > > }, > > "data": { > > "type": "file", > > "format": "GeoPackage (tiles)", > > "file": "CIB.gpkg" > > }, > > "tasks": [ > > { > > "id": 0, > > "href": > > "http://localhost:12121/geoserver/rest/imports/24/tasks/0;, > > "state": "READY" > > } > > ] > > } > > } > > > > PUT http://localhost:12121/geoserver/rest/imports/24/tasks/0 > > {"task":{"updateMode":"REPLACE"}} > > > > > > -- > Sent from: > http://osgeo-org.1560.x6.nabble.com/GeoServer-User-f3786390.html > > > -- > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. =
Re: [Geoserver-users] [Geoserver-devel] GSIP 169 - WPS Extension "GetExecutions" Operation
Hello Andrea, my responses below. 1. "How do you compute the estimated completion and the next poll? Do they need a API change in the WPS core?" My original idea was that this remains an optional parameter, therefore no need to implement for every process nor to change the core itself. It should be used only for processes which somehow can be predicted. I just wanted to give to someone the possibility to tell to the client that the process might take a certain amount of time in case this could be estimated somehow. I envision this one more useful on specific extensions or external processes which have a computational method to estimate their completion. 2. "The JobId is the id of the execution, while the identifier is the process 'name'?" Yes, exactly. 3. "When does a GetExecutions request throw a DataNotAccessible, ServerBusy, or WrongInputData exception?" I envisaged those types of exceptions in order to cover some possible use cases especially when trying to retrieve the whole list of input/outputs values through the "lineage" option. In particular: - DataNotAccessible; should be thrown in the unlucky cases that the associated execution folder has been removed or it is somehow unaccessible - ServerBusy; might be thrown in the case GeoServer is locked and it is not temporarily able to retrieve some input values (I'm not fully sure if this could happens though) - WrongInputData; originally I thought this should be thrown in the case someone tried to run an execution with wrong input values and therefore the process failed. I'm not fully sure here how the "lineage" option could manage this however. Any comment? Il giorno mar 7 ago 2018 alle ore 10:15 Andrea Aime < andrea.a...@geo-solutions.it> ha scritto: > Hi Alessio, > some quick feedback. > > About > https://github.com/geoserver/geoserver/wiki/GSIP-169#statusinfo-document > >- How do you compute the estimated completion and the next poll? Do >they need a API change in the WPS core? >- The JobId is the id of the execution, while the identifier is the >process "name"? > > > About > https://github.com/geoserver/geoserver/wiki/GSIP-169#getexecutionsexceptions > When does a GetExecutions request throw a DataNotAccessible, ServerBusy, > or WrongInputData > exception? The GetExecutions operations should be a light one and it would > be bad imho not to > get the desired list because one of the processes has had invalid inputs > (but maybe I don't understand > exactly when these are meant to be thrown). > > Cheers > Andrea > > > On Fri, Aug 3, 2018 at 11:22 AM Alessio Fabiani < > alessio.fabi...@geo-solutions.it> wrote: > >> Dear all, dear PSC, >> please find details about GSIP 169 @ >> >> https://github.com/geoserver/geoserver/wiki/GSIP-169 >> >> comments and feedbacks are appreciated. >> >> thanks, >> Alessio. >> >> -- >> >> == >> >> GeoServer Professional Services from the experts! Visit >> http://goo.gl/it488V for more information. >> == >> Ing. Alessio Fabiani >> >> @alfa7691 >> Founder/Technical Lead >> >> >> GeoSolutions S.A.S. >> Via di Montramito 3/A - 55054 Massarosa (LU) - Italy >> phone: +39 0584 962313 >> fax: +39 0584 1660272 >> mob: +39 331 6233686 >> >> >> http://www.geo-solutions.it >> http://twitter.com/geosolutions_it >> --- >> >> Con riferimento alla normativa sul trattamento dei dati personali (Reg. >> UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si >> precisa che ogni circostanza inerente alla presente email (il suo >> contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è >> riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il >> messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra >> operazione è illecita. Le sarei comunque grato se potesse darmene notizia. >> >> >> This email is intended only for the person or entity to which it is >> addressed and may contain information that is privileged, confidential or >> otherwise protected from disclosure. We remind that - as provided by >> European Regulation 2016/679 “GDPR” - copying, dissemination or use of this >> e-mail or the information herein by anyone other than the intended >> recipient is prohibited. If you have received this email by mistake, please >> notify us immediately by telephone or e-mail. >> >> -- >> Check out the vibrant tech community on one of the world's most >>
Re: [Geoserver-users] [Geoserver-devel] GSIP 169 - WPS Extension "GetExecutions" Operation
Hi Simone, I have updated the proposal accordingly https://github.com/geoserver/geoserver/wiki/GSIP-169#response-paging Please have a look if that proposal makes sense. I tried to follow a path which is consistent with the WFS 2.0.0 Response Paging implementation. Il giorno ven 3 ago 2018 alle ore 16:06 Simone Giannecchini < simone.giannecch...@geo-solutions.it> ha scritto: > Only one concern, I would add paging support for when we get information > back. > > I would make default paging limit very high as I expect most responses > will fit in one page but still > > Besides that I am +1 > > Regards, > Simone Giannecchini > == > GeoServer Professional Services from the experts! > Visit http://goo.gl/it488V for more information. > == > Ing. Simone Giannecchini > @simogeo > Founder/Director > > GeoSolutions S.A.S. > Via di Montramito 3/A > 55054 Massarosa (LU) > Italy > phone: +39 0584 962313 > fax: +39 0584 1660272 > mob: +39 333 8128928 > > http://www.geo-solutions.it > http://twitter.com/geosolutions_it > > --- > Con riferimento alla normativa sul trattamento dei dati personali > (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati > “GDPR”), si precisa che ogni circostanza inerente alla presente email > (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui > conoscenza è riservata al/i solo/i destinatario/i indicati dallo > scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a > cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato > se potesse darmene notizia. > > This email is intended only for the person or entity to which it is > addressed and may contain information that is privileged, confidential > or otherwise protected from disclosure. We remind that - as provided > by European Regulation 2016/679 “GDPR” - copying, dissemination or use > of this e-mail or the information herein by anyone other than the > intended recipient is prohibited. If you have received this email by > mistake, please notify us immediately by telephone or e-mail. > On Fri, Aug 3, 2018 at 11:20 AM Alessio Fabiani > wrote: > > > > Dear all, dear PSC, > > please find details about GSIP 169 @ > > > > https://github.com/geoserver/geoserver/wiki/GSIP-169 > > > > comments and feedbacks are appreciated. > > > > thanks, > > Alessio. > > > > -- > > > > == > > > > GeoServer Professional Services from the experts! Visit > http://goo.gl/it488V for more information. > > == > > Ing. Alessio Fabiani > > > > @alfa7691 > > Founder/Technical Lead > > > > > > GeoSolutions S.A.S. > > Via di Montramito 3/A - 55054 Massarosa (LU) - Italy > > phone: +39 0584 962313 > > fax: +39 0584 1660272 > > mob: +39 331 6233686 > > > > > > http://www.geo-solutions.it > > http://twitter.com/geosolutions_it > > --- > > > > Con riferimento alla normativa sul trattamento dei dati personali (Reg. > UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si > precisa che ogni circostanza inerente alla presente email (il suo > contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è > riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il > messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra > operazione è illecita. Le sarei comunque grato se potesse darmene notizia. > > > > > > This email is intended only for the person or entity to which it is > addressed and may contain information that is privileged, confidential or > otherwise protected from disclosure. We remind that - as provided by > European Regulation 2016/679 “GDPR” - copying, dissemination or use of this > e-mail or the information herein by anyone other than the intended > recipient is prohibited. If you have received this email by mistake, please > notify us immediately by telephone or e-mail. > > > > > -- > > Check out the vibrant tech community on one of the world's most > > engaging tech sites, Slashdot.org! > http://sdm.link/slashdot___ > > Geoserver-devel mailing list > > geoserver-de...@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/geoserver-devel > -- == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montrami
[Geoserver-users] GSIP 169 - WPS Extension "GetExecutions" Operation
Dear all, dear PSC, please find details about GSIP 169 @ https://github.com/geoserver/geoserver/wiki/GSIP-169 comments and feedbacks are appreciated. thanks, Alessio. -- == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A - 55054 Massarosa (LU) - Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail. -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] [Geoserver-devel] Pre-Proposal: WPS Extension "GetExecutions" Operation
I forgot to mention that the processes running on the backend for the use case I was speaking about, are so heavy that the time spent to produce the outputs might be negligible. Il giorno ven 13 lug 2018 alle ore 15:04 Alessio Fabiani < alessio.fabi...@geo-solutions.it> ha scritto: > Hi Andrea, > not sure this is useful for our real use case. In our case we can send > this estimate from the backend. In particular we are using the "wps-remote" > plugin which completely relies on backend processes decoupled by an XMPP > layer. > > Nevertheless, my intention is to include this parameter on the proposal, > even though this will be optional, since it is possible that some Processes > instances in the future might use it and provide really useful information > to the client. > > Il giorno ven 13 lug 2018 alle ore 10:45 Andrea Aime < > andrea.a...@geo-solutions.it> ha scritto: > >> Hi Alessio, >> thanks for the useful feedback. Notes inline. >> >> On Thu, Jul 12, 2018 at 12:30 PM, Alessio Fabiani < >> alessio.fabi...@geo-solutions.it> wrote: >> >>> >>> *Executions List* >>> At a first glance I was thinking to the possibility of having some >>> "public" executions, somehow, but digging a bit more on the proposal this >>> does not make much sense. >>> >>> The new operation should return only the list of available Executions >>> the logged in user has started, except in the case it is an Administrator. >>> In that case he will be able to get the whole list. >>> >> >> Yep, makes sense. >> >> >>> >>> *StatusInfo Response* >>> Yes, roughly it should return what we see on the GUI, possibly with a >>> bit more information (when/if available) as detailed in the table below >>> >>> *NamesDefinitionData type and valuesMultiplicity and >>> useJobIDUnambiguously identifier of a execution job within a WPS >>> instance.Character String aOne (mandatory)IdentifierUnambiguously >>> identifier of a process within a WPS instance.ows:IdentifierOne >>> (mandatory)StatusWell-known identifier describing the status of the >>> job.Character String bOne (mandatory)ExpirationDateDate and time by which >>> the job and its results will be no longer accessible. cISO-8601 date/time >>> string in the form -MM-DDTHH:MM:SS.SSSZ with T separator character and >>> Z suffix for coordinated universal time (UTC)Zero or one (optional) Include >>> if available.EstimatedCompletionDate and time by which the processing job >>> will be finished.ISO-8601 date/time string in the form >>> -MM-DDTHH:MM:SS.SSSZ with T separator character and Z suffix for >>> coordinated universal time (UTC)Zero or one (optional) Include if >>> available.NextPollDate and time for the next suggested status >>> polling.ISO-8601 date/time string in the form -MM-DDTHH:MM:SS.SSSZ with >>> T separator character and Z suffix for coordinated universal time (UTC)Zero >>> or one (optional) Include if available.PercentCompletedPercentage of >>> process that has been completed.Integer{0..100} dZero or one (optional) >>> Include if available.a) Particularly suitable JobIDs are UUIDs or monotonic >>> identifiers such as unique timestamps. If the privacy of a Processing Job >>> is imperative, the JobID should be non-guessable.b) The basic status set is >>> defined in http://docs.opengeospatial.org/is/14-065/14-065.html >>> <http://docs.opengeospatial.org/is/14-065/14-065.html> Table 3. Additional >>> states may be defined by certain operations or extensions of this >>> standard.c) This element will usually become available when the execution >>> has finished (Status = “finished”). d) Zero (0) means the execution has >>> just started, and 100 means the job is complete. This value is informative >>> only without any accuracy guarantees.* >>> >> >> How will you guess the estimated completion? Elapsed time vs percentage >> complete? >> In general GeoServer has a hard time with the percentage complete >> calculation, as the overall process execution >> goes through 3 phases: >> >>- Parsing the inputs and turning them into Java classes suitable for >>process consumption. This part is given a fixed percentage. If all the >>inputs are simple (string, number, dates) the % is small, if the inputs >> are >>complexes (have to be parsed and may be large or retrieved from remote) I >>think it's something like 30%, but you'd have to check in the code. >>-
Re: [Geoserver-users] [Geoserver-devel] Pre-Proposal: WPS Extension "GetExecutions" Operation
Hi Andrea, not sure this is useful for our real use case. In our case we can send this estimate from the backend. In particular we are using the "wps-remote" plugin which completely relies on backend processes decoupled by an XMPP layer. Nevertheless, my intention is to include this parameter on the proposal, even though this will be optional, since it is possible that some Processes instances in the future might use it and provide really useful information to the client. Il giorno ven 13 lug 2018 alle ore 10:45 Andrea Aime < andrea.a...@geo-solutions.it> ha scritto: > Hi Alessio, > thanks for the useful feedback. Notes inline. > > On Thu, Jul 12, 2018 at 12:30 PM, Alessio Fabiani < > alessio.fabi...@geo-solutions.it> wrote: > >> >> *Executions List* >> At a first glance I was thinking to the possibility of having some >> "public" executions, somehow, but digging a bit more on the proposal this >> does not make much sense. >> >> The new operation should return only the list of available Executions the >> logged in user has started, except in the case it is an Administrator. In >> that case he will be able to get the whole list. >> > > Yep, makes sense. > > >> >> *StatusInfo Response* >> Yes, roughly it should return what we see on the GUI, possibly with a bit >> more information (when/if available) as detailed in the table below >> >> *NamesDefinitionData type and valuesMultiplicity and >> useJobIDUnambiguously identifier of a execution job within a WPS >> instance.Character String aOne (mandatory)IdentifierUnambiguously >> identifier of a process within a WPS instance.ows:IdentifierOne >> (mandatory)StatusWell-known identifier describing the status of the >> job.Character String bOne (mandatory)ExpirationDateDate and time by which >> the job and its results will be no longer accessible. cISO-8601 date/time >> string in the form -MM-DDTHH:MM:SS.SSSZ with T separator character and >> Z suffix for coordinated universal time (UTC)Zero or one (optional) Include >> if available.EstimatedCompletionDate and time by which the processing job >> will be finished.ISO-8601 date/time string in the form >> -MM-DDTHH:MM:SS.SSSZ with T separator character and Z suffix for >> coordinated universal time (UTC)Zero or one (optional) Include if >> available.NextPollDate and time for the next suggested status >> polling.ISO-8601 date/time string in the form -MM-DDTHH:MM:SS.SSSZ with >> T separator character and Z suffix for coordinated universal time (UTC)Zero >> or one (optional) Include if available.PercentCompletedPercentage of >> process that has been completed.Integer{0..100} dZero or one (optional) >> Include if available.a) Particularly suitable JobIDs are UUIDs or monotonic >> identifiers such as unique timestamps. If the privacy of a Processing Job >> is imperative, the JobID should be non-guessable.b) The basic status set is >> defined in http://docs.opengeospatial.org/is/14-065/14-065.html >> <http://docs.opengeospatial.org/is/14-065/14-065.html> Table 3. Additional >> states may be defined by certain operations or extensions of this >> standard.c) This element will usually become available when the execution >> has finished (Status = “finished”). d) Zero (0) means the execution has >> just started, and 100 means the job is complete. This value is informative >> only without any accuracy guarantees.* >> > > How will you guess the estimated completion? Elapsed time vs percentage > complete? > In general GeoServer has a hard time with the percentage complete > calculation, as the overall process execution > goes through 3 phases: > >- Parsing the inputs and turning them into Java classes suitable for >process consumption. This part is given a fixed percentage. If all the >inputs are simple (string, number, dates) the % is small, if the inputs are >complexes (have to be parsed and may be large or retrieved from remote) I >think it's something like 30%, but you'd have to check in the code. >- Actual execution, consuming java objects and producing other java >objects. This is all over the place, some processes are streaming and give >you back a GridCoverage2D backed by a deferred execution or a >FeatureCollection that will compute the results when traversed (both to >avoid storing a ton of memory), others have no progress support at all, >only a subset are actually doing the computation during execute and with >reasonable progress support. >- Result encoding. This is similar to input parsing, if the result is >complex the final encoding is given a large-ish
[Geoserver-users] Pre-Proposal: WPS Extension "GetExecutions" Operation
Dear lists, I would like here to ask your opinion about a possible extension/improvement of the GeoServer WPS Service. *The main goal of this proposal is to allow a client to recognize the list of WPS Executions through a simple request to a WPS Operation. What we would like to achieve would be something similar to this:* [image: image.png] *The client makes a simple “GetExecutions” request to the WPS Server, in order to get back an XML document containing the list of current Execution Statuses.Ideally should be possible also to filter the “GetExecutions” request along with simple parameters, in order to refine the output and get back only the executions status we are looking for.Adding a bit more to this, if AUTHORIZATION headers are sent along with the “GetExecutions” request, the WPS Server should be able, if a security subsystem is available and enable on the latter, of provide also the list of eventually private/protected resources to the client itself.Part of this proposal is also to review and improve the “lineage” option of the WPS service, allowing a client to retrieve the Execute Inputs values provided to the process Identifier.* Thoughts? -- == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A - 55054 Massarosa (LU) - Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail. -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] SLD Service Community Module 2.12
Yes, I'm going to open a JIRA about that. I guess other community modules can be reactivated. I will take some time to review the ones updated and re-enable them back to the GeoServer community release module as well. Regards, Alessio Fabiani == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- AVVERTENZE AI SENSI DEL D.Lgs. 196/2003 Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. 2018-03-15 15:14 GMT+01:00 Andrea Aime <andrea.a...@geo-solutions.it>: > On Thu, Mar 15, 2018 at 3:03 PM, Alessio Fabiani <alessio.fabiani@geo- > solutions.it> wrote: > >> Dear all, >> currently most of the sldService community module has been adapted >> already to the new REST interfaces. >> >> I guess it is not included on the official build script of GeoServer. >> > > If it's fixed, it's just a matter of uncommenting the relevant parts in > the GeoServer community module :-) > > Cheers > Andrea > > == > GeoServer Professional Services from the experts! Visit > http://goo.gl/it488V for more information. > == > > Ing. Andrea Aime > @geowolf > Technical Lead > > GeoSolutions S.A.S. > Via di Montramito 3/A > <https://maps.google.com/?q=Via+di+Montramito+3/A+55054+%C2%A0Massarosa=gmail=g> > 55054 Massarosa > <https://maps.google.com/?q=Via+di+Montramito+3/A+55054+%C2%A0Massarosa=gmail=g> > (LU) > phone: +39 0584 962313 <0584%20962313> > fax: +39 0584 1660272 <0584%20166%200272> > mob: +39 339 8844549 <339%20884%204549> > > http://www.geo-solutions.it > http://twitter.com/geosolutions_it > > AVVERTENZE AI SENSI DEL D.Lgs. 196/2003 > > Le informazioni contenute in questo messaggio di posta elettronica e/o > nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il > loro utilizzo è consentito esclusivamente al destinatario del messaggio, > per le finalità indicate nel messaggio stesso. Qualora riceviate questo > messaggio senza esserne il destinatario, Vi preghiamo cortesemente di > darcene notizia via e-mail e di procedere alla distruzione del messaggio > stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, > divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od > utilizzarlo per finalità diverse, costituisce comportamento contrario ai > principi dettati dal D.Lgs. 196/2003. > > The information in this message and/or attachments, is intended solely for > the attention and use of the named addressee(s) and may be confidential or > proprietary in nature or covered by the provisions of privacy act > (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection > Code).Any use not in accord with its purpose, any disclosure, reproduction, > copying, distribution, or either dissemination, either whole or partial, is > strictly forbidden except previous formal approval of the named > a
Re: [Geoserver-users] SLD Service Community Module 2.12
Dear all, currently most of the sldService community module has been adapted already to the new REST interfaces. I guess it is not included on the official build script of GeoServer. Some updated artifacts can be found here http://maven.geo-solutions.it/org/geoserver/community/ Regards, Alessio Fabiani == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- AVVERTENZE AI SENSI DEL D.Lgs. 196/2003 Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. 2018-03-14 11:14 GMT+01:00 Ben Caradoc-Davies <b...@transient.nz>: > And it is also worth noting that we have migrated to a new build server, > which also does not contain sldservice, for the reason noted by Brad: > https://build.geoserver.org/geoserver/2.12.x/community-latest/ > > If sldservice were ever fixed, it would appear only on the new server. > > Kind regards, > Ben. > > On 14/03/18 19:12, br...@frogmouth.net wrote: > >> A few community modules were not updated during the big REST upgrade some >> time back. >> >> See https://github.com/geoserver/geoserver/commit/c4967ff152e4bf >> f8996391ec76be8c91527859ba >> >> >> Brad >> >> >> From: Aphelele Dlayiya <aphelele.dlay...@gmail.com> >> Sent: Wednesday, 14 March 2018 4:53 PM >> To: Geoserver-users@lists.sourceforge.net >> Subject: [Geoserver-users] SLD Service Community Module 2.12 >> >> >> Deal All, >> >> >> I am trying to find the sldservice community module for Geoserver 2.12. >> >> >> I have looked here: <http://ares.boundlessgeo.com/ >> geoserver/2.12.x/community-latest/> http://ares.boundlessgeo.com/g >> eoserver/2.12.x/community-latest// >> >> >> Other community modules are there but not the sldservice one. >> >> >> I tried installing sldservice version 2.11 with Geoserver 2.12.2 but >> Geoserver would not start. >> >> >> Does anyone know if seldservice works with version 2.12.2 and where I >> could download the jar file? >> >> >> >> Thank you, >> >> >> Aphelele Dlayiya >> >> >> >> >> >> >> -- >> Check out the vibrant tech community on one of the world's most >> engaging tech sites, Slashdot.org! http://sdm.link/slashdot >> >> >> >> ___ >> Geoserver-users mailing list >> >> Please make sure you read the following two resources before posting to >> this list: >> - Earning your support instead of buying it, but Ian Turton: >> http://www.ianturton.com/talks/foss4g.html#/ >> - The GeoServer user list posting guidelines: >> http://geoserver.org/comm/userlist-guidelines.html >> >
Re: [Geoserver-users] Backup & Restore extension
Hello Rene, can you go to the log console of the executed Backup, increment the log detail level by at least 1 and refresh? You should be able to get the stacktrace. Would be good if you can send it to me. Regards, Alessio Fabiani == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- AVVERTENZE AI SENSI DEL D.Lgs. 196/2003 Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. 2018-02-07 15:19 GMT+01:00 Rene <r.ber...@meierpartner.ch>: > Hello > > I installed the Backup & Restore extension on a Geoserver 2.11.2. I tried > now to backup a workspace, but I get an error: > java.util.concurrent.ExecutionException: > org.springframework.batch.core.UnexpectedJobExecutionException: Exception > occurred while storing GeoServer globals and services settings! > > When I look into the Backup Executions there are the follow information: > > SEVERE:org.springframework.batch.core.UnexpectedJobExecutionException: > Exception occurred while storing GeoServer globals and services settings! > SEVERE:Exception occurred while storing GeoServer globals and services > settings! > SEVERE:Exception occurred while storing GeoServer globals and services > settings! > SEVERE:Cannot access layer_001 as anonymous > NO Warnings Detected. > > It seems to be a permission problem, how can I set a user / role for this > extension to let it run? > > I'm using a Windows Server 2012 R2, Geoserver is installed with a war file > on a Tomcat 7. > > Can anybody help me? > > Best regards > > Rene > > > > > -- > Sent from: http://osgeo-org.1560.x6.nabble.com/GeoServer-User- > f3786390.html > > > -- > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: http://geoserver.org/comm/ > userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully- > requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot___ Geoserver-users mailing list Please make sure you read the following two resource
Re: [Geoserver-users] Oauth2-Google and Geofence Connection
Hi all, seems like there may be some dependencies configuration issues with the OAuth2 Google Plugin. I'll try to have a look at them as soon as I can. Regards, Alessio Fabiani == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- AVVERTENZE AI SENSI DEL D.Lgs. 196/2003 Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. On Thu, Jul 6, 2017 at 4:20 PM, Steve Omondi <steve.omo...@ramani.co.ke> wrote: > I appreciate Nuno. > > > > > > Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for > Windows 10 > > > > *From: *Nuno Oliveira <nuno.olive...@geo-solutions.it> > *Sent: *Thursday, July 6, 2017 4:16 PM > *To: *Steve Omondi <steve.omo...@ramani.co.ke>; geoserver-users@lists. > sourceforge.net > *Subject: *Re: [Geoserver-users] Oauth2-Google and Geofence Connection > > > > Hi, > > I juts make a test and indeed Google oauth2 seems to not be working at > least in > GeoServer 2.12.x. (see attached GIF) and indeed no exception is logged. > > The web UI integration seems to be a bit broke too: > > [image: cid:part1.6954620F.95331BE9@geo-solutions.it] > > > The plugin google-oauth package is also including the github and geonode > bindings ... this is probably no intended. > > I only used \ configured this authentication method once with GeoServer so > maybe I'm missing > something ... let's see if anyone can provide you a more valuable feedback. > > Otherwise I will proceed with opening a bug report. > > Note, I think that the person who wrote the google-oauth module will not > be available this week and next week. > > Regards, > > Nuno Oliveira > > On 07/06/2017 10:49 AM, Steve Omondi wrote: > > Hi Nuno, > > > > Attached is my Log file after raising to DEBUG Level > > > > I has some interesting stuff, but I can’t figure out where the problem is > raised. > > > > For example. There is a point where Geoserver is looking for *Geonode > Session ID* > > > > Line 152: (and several other points) > > 2017-07-06 12:07:35,099 DEBUG [web.FilterChainProxy] - /web/ at position 2 > of 7 in additional filter chain; firing Filter: ' > GoogleOAuthAuthenticationFilter' > > 2017-07-06 12:07:35,099 DEBUG [geoserver.security] - Inspecting the http > request looking for the GeoNode Session ID. > > 2017-07-06 12:07:35,099 DEBUG [geoserver.security] - Found 1 cookies! > > > > What has this got to do with google-oauth2. I I’m not using geonode-oauth2 > even though it was installed together with google-oauth2. > > > > I’m using Geoserver 2.11.1 with > geoserver-2.11-SNAPSHOT-sec-oauth2-google-plugin > which had both geonode-oauth2 and GitHub-oauth2 bundled with it. > > > > Kindly assist where possible. > > > > > > Kind Regards, > > Steve Omondi > > Ramani Geos
Re: [Geoserver-users] Geoserver 2.9.2 GC overhead limit exceeded
Dear Julius, just wanted to warn you that your emails are marked as spam at least by google accounts. Could it be a problem caused by how you setup your email address or client? Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 github <https://github.com/afabiani?tab=overview> Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Wed, Apr 12, 2017 at 3:29 PM, user154654 <djul...@yahoo.com> wrote: > Tomcat log after latest crash https://ufile.io/db33d1 > > > > -- > View this message in context: http://osgeo-org.1560.x6. > nabble.com/Geoserver-2-9-2-GC-overhead-limit-exceeded- > tp5306122p5317003.html > Sent from the GeoServer - User mailing list archive at Nabble.com. > > > -- > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > ___ > Geoserver-users mailing list > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] spring PropertyPlaceholderConfigurer for data directory files?
I see, yes, as I said it is possible that some configuration files are not paramterized. I remember a first version substituting almost everything, but we have to limit it since it was too invasive and tries to modify too much GeoServer core files in a once. We may envisage to extend it again, but this will require some more work. In the meantime you may want to open JIRAs for GeoServer and maybe expose your needs to the community. If wide accepted as a useful improvement, I'm pretty sure it will be easy to find some volunteering work. Otherwise you may want to try to extend it by yourself and ask the community for hints and help reviewing your code. Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 github <https://github.com/afabiani?tab=overview> Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Mon, Mar 20, 2017 at 9:04 PM, Keane, Tim <tke...@doitt.nyc.gov> wrote: > Allessio- > > > > Thanks again… > > I made some additional progress, but it does seem that there is some > limitation to the files that can be configured in this way. Please see me > latest responses below. > > > > Thanks > > -Tim > > > > *From:* Alessio Fabiani [mailto:alessio.fabi...@geo-solutions.it] > *Sent:* Monday, March 20, 2017 2:03 PM > *To:* Keane, Tim <tke...@doitt.nyc.gov> > *Cc:* Alessio Fabiani <alessio.fabi...@geo-solutions.it>; > geoserver-users@lists.sourceforge.net > *Subject:* Re: [Geoserver-users] spring PropertyPlaceholderConfigurer for > data directory files? > > > > Hi Tim, > > please see responses below > > > > On Mon, Mar 20, 2017 at 6:26 PM, Keane, Tim <tke...@doitt.nyc.gov> wrote: > > Alessio- > > > > Thank you very much. This is definitely what I am after. I just have a > couple of points that maybe you can clarify for me: > > > > 1.It appears that the properties in geoserver-environment.properties > can only be applied to configuration in data_dir/workspaces such as > datastore.xml and coveragestore.xml files, but not other configuration like > data_dir/logging.xml, data_dir/gwc/geowebcache.xml, or > data_dir/security/usergroup/default/users.xml – is this correct? > > > > *It should work also on other catalog settings, not only on catalog. At > least settings accessible from the UI. Did you already tried it on other > settings?* > > > > I have tried the following: > > > > set datastore.basemap.host=dbhost > > set datastore.basemap.passwd= > > set coveragestore.coast.url=file:///D:/coast-tiff-optimized > > set logging.level=VERBOSE_LOGGING.properties > > geowebcache.wmsUrl=http://loadblancer-vip/geoserver/wms/ > > > > set JAVA_OPTS=%JA
Re: [Geoserver-users] spring PropertyPlaceholderConfigurer for data directory files?
Hi Tim, please see responses below On Mon, Mar 20, 2017 at 6:26 PM, Keane, Tim <tke...@doitt.nyc.gov> wrote: > Alessio- > > > > Thank you very much. This is definitely what I am after. I just have a > couple of points that maybe you can clarify for me: > > > > 1.It appears that the properties in geoserver-environment.properties > can only be applied to configuration in data_dir/workspaces such as > datastore.xml and coveragestore.xml files, but not other configuration like > data_dir/logging.xml, data_dir/gwc/geowebcache.xml, or > data_dir/security/usergroup/default/users.xml – is this correct? > *It should work also on other catalog settings, not only on catalog. At least settings accessible from the UI. Did you already tried it on other settings?* > 2. It also looks like according to the comment in the source code > for GeoServerEnvironment.java that System variables should also work, > however neither setting them as System Environment variables or setting > them in JAVA_OPTS seemed to work – only placing the > geoserver-environment.properties > in the data directory worked. https://github.com/geoserver/geoserver/blob/ > 0054d601f5283fbde087bb253286e9512185d998/src/platform/src/ > main/java/org/geoserver/platform/GeoServerEnvironment.java#L153 > *That's strange. From what I can see here * https://github.com/geoserver/geoserver/blob/0054d601f5283fbde087bb253286e9512185d998/src/platform/src/main/java/org/geoserver/platform/GeoServerEnvironment.java#L129 *it first searches for the property on System and if not null is uses it. You may try to rise up the log level and see if you find the line *"Could not access system property ..." > > > Ideally I would like to be able to externalize the data directory using > the env var GEOSERVER_DATA_DIR and also any property contained within > config files found in the data directory, allowing for the same war file to > be deployed across environments. > *This feature should be able to parametrize almost all config files. If someone is not resolved correctly it may be either an issue or not handled by the code.* *If you have a very specific use case, you might also consider to backup and restore the configuration parametrized and implement special extensions that mangle the data dir like we did in this example for the ImageMosaics* https://github.com/geoserver/geoserver/blob/55c4740060eb2b8809ae935a510ac83eeb923313/src/community/backup-restore/extension/src/main/java/org/geoserver/backuprestore/imagemosaic/reader/ImageMosaicAdditionalResourceReader.java *Notice that the backup and restore zip files may be also streamed via REST. That way you can easily implement scripts to deploy configurations remotely.* > > > Thanks > > -Tim > > > > > > *From:* Alessio Fabiani [mailto:alessio.fabi...@geo-solutions.it] > *Sent:* Monday, March 20, 2017 11:39 AM > *To:* Keane, Tim <tke...@doitt.nyc.gov> > *Cc:* geoserver-users@lists.sourceforge.net > *Subject:* Re: [Geoserver-users] spring PropertyPlaceholderConfigurer for > data directory files? > > > > Hi Tim, > > during the work for the Backup & Restore plugin for GeoServer, we had the > chance to implement also the possibility for GeoServer of externalize > catalog parameters into a ".properties" file placed on the GeoServer Data > Directory. > > Hopefully this may help you. > > > > Some more details and a small example on how to use it can be found here > > > > http://docs.geoserver.org/latest/en/user/community/ > backuprestore/configtemplate.html > > > > Please, notice that the documentation is a bit misleading. You won't need > to install also the Backup & Restore plugin, this functionality is already > available on GeoServer. > > > > Let me know how it goes and if you need further details/help on this. > > > > Cheers, > > Alessio Fabiani. > > > > > Best Regards, > > Alessio Fabiani. > > > > == > > GeoServer Professional Services from the experts! > > Visit http://goo.gl/it488V for more information. > > == > > > > Ing. Alessio Fabiani > > @alfa7691 > > github <https://github.com/afabiani?tab=overview> > > Founder/Technical Lead > > > > GeoSolutions S.A.S. > > Via di Montramito 3/A > > 55054 Massarosa (LU) > > Italy > > phone: +39 0584 962313 <0584%20962313> > > fax: +39 0584 1660272 <0584%20166%200272> > > mob: +39 331 6233686 <331%20623%203686> > > > > http://www.geo-solutions.it > > http://twitter.com/geosolutions_it > > > > --- > > > > *AVVERTENZE AI SENSI DEL D
Re: [Geoserver-users] spring PropertyPlaceholderConfigurer for data directory files?
Hi Tim, during the work for the Backup & Restore plugin for GeoServer, we had the chance to implement also the possibility for GeoServer of externalize catalog parameters into a ".properties" file placed on the GeoServer Data Directory. Hopefully this may help you. Some more details and a small example on how to use it can be found here http://docs.geoserver.org/latest/en/user/community/backuprestore/configtemplate.html Please, notice that the documentation is a bit misleading. You won't need to install also the Backup & Restore plugin, this functionality is already available on GeoServer. Let me know how it goes and if you need further details/help on this. Cheers, Alessio Fabiani. Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 github <https://github.com/afabiani?tab=overview> Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Mon, Mar 20, 2017 at 3:29 PM, Keane, Tim <tke...@doitt.nyc.gov> wrote: > Is there a mechanism for using a properties file for value substitution > into all things xml in the data directory? (i.e., datastore.xml, > coveragestore.xml, users.xml) > > -- > > This e-mail, including any attachments, may be confidential, privileged or > otherwise legally protected. It is intended only for the addressee. If you > received this e-mail in error or from someone who was not authorized to > send it to you, do not disseminate, copy or otherwise use this e-mail or > its attachments. Please notify the sender immediately by reply e-mail and > delete the e-mail from your system. > > > -- > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > ___ > Geoserver-users mailing list > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > > -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] data dir migration from 2.7.x to 2.9.x
Ah good to know. Thanks Eugenio, Alessio. Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 github <https://github.com/afabiani?tab=overview> Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Thu, Mar 2, 2017 at 2:41 PM, Eugenio Trumpy <frippe12...@hotmail.com> wrote: > I checked the contents of the security directories/files between those you > suggested in data-2.9.zip and those I had in my 2.7 data dir. > > I just insert the right baseurl in the geonodeAuthProvider/config.xml and > it works. > > > Now I have geonode 2.4 stable with geonode 2.9-snapshot. > > I can confirm that layers that had the border (due to tne reprojection on > the fly) are well represented!! > > > So changing the geoserver version solved the issue. > > Thank you > > E. > > -- > *Da:* alessio.fabi...@gmail.com <alessio.fabi...@gmail.com> per conto di > Alessio Fabiani <alessio.fabi...@geo-solutions.it> > *Inviato:* giovedì 2 marzo 2017 10.13 > *A:* Andrea Aime > *Cc:* Eugenio Trumpy; geoserver-users@lists.sourceforge.net > *Oggetto:* Re: [Geoserver-users] data dir migration from 2.7.x to 2.9.x > > Hi Eugenio, > > try to replace the following "security" folders of your GeoServer data dir > with the one here http://build.geonode.org/geoserver/latest/data-2.9.x.zip > (backup the old ones first): > > 1. security\auth\geonodeAuthProvider > 2. security\filter\geonodeAnonymousFilter > 3. security\filter\geonodeCookieFilter > > Later make sure to redo manually the GeoNode authentication filter > configuration settings on the new security folder (just do a diff of XML > files and be sure the GeoNode and GeoServer URLs are correct) > > > Best Regards, > Alessio Fabiani. > > == > GeoServer Professional Services from the experts! > Visit http://goo.gl/it488V for more information. > GeoSolutions Enterprise Services <http://goo.gl/it488V> > goo.gl > GeoSolutions offers enterprise support services to help you building > enterprise-class Spatial Data Infrastructures leveraging on best-of-breed > Open Source > > == > > Ing. Alessio Fabiani > @alfa7691 > github <https://github.com/afabiani?tab=overview> > Founder/Technical Lead > > GeoSolutions S.A.S. > Via di Montramito 3/A > 55054 Massarosa (LU) > Italy > phone: +39 0584 962313 <0584%20962313> > fax: +39 0584 1660272 <0584%20166%200272> > mob: +39 331 6233686 <331%20623%203686> > > http://www.geo-solutions.it > http://twitter.com/geosolutions_it > > --- > > *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* > > Le informazioni contenute i
Re: [Geoserver-users] data dir migration from 2.7.x to 2.9.x
Hi Eugenio, try to replace the following "security" folders of your GeoServer data dir with the one here http://build.geonode.org/geoserver/latest/data-2.9.x.zip (backup the old ones first): 1. security\auth\geonodeAuthProvider 2. security\filter\geonodeAnonymousFilter 3. security\filter\geonodeCookieFilter Later make sure to redo manually the GeoNode authentication filter configuration settings on the new security folder (just do a diff of XML files and be sure the GeoNode and GeoServer URLs are correct) Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 github <https://github.com/afabiani?tab=overview> Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Thu, Mar 2, 2017 at 9:57 AM, Andrea Aime <andrea.a...@geo-solutions.it> wrote: > Hi Eugenio, > read below: > > On Thu, Mar 2, 2017 at 9:10 AM, Eugenio Trumpy <frippe12...@hotmail.com> > wrote: > >> org.geonode.security.HTTPClient.sendGET(HTTPClient.java:89) >> >> * >> org.geonode.security.DefaultSecurityClient.authenticate(DefaultSecurityClient.java:185) >> >> org.geonode.security.DefaultSecurityClient.authenticateCookie(DefaultSecurityClient.java:116) >> >> org.geonode.security.GeoNodeAuthenticationProvider.authenticate(GeoNodeAuthenticationProvider.java:66)*You >> are hitting an issue with a plugin the GeoServer community is not >> maintaining, not sure we can help. >> >> Plugins are version specific, I'd suggest you check with the GeoNode > developers if there is a version compatible > with GeoServer 2.9 and see if there is any upgrade procedure you have to > follow to use it > > Cheers > Andrea > > > > -- > == > GeoServer Professional Services from the experts! Visit > http://goo.gl/it488V for more information. > == > > Ing. Andrea Aime > @geowolf > Technical Lead > > GeoSolutions S.A.S. > Via di Montramito 3/A > 55054 Massarosa (LU) > phone: +39 0584 962313 <0584%20962313> > fax: +39 0584 1660272 <0584%20166%200272> > mob: +39 339 8844549 <339%20884%204549> > > http://www.geo-solutions.it > http://twitter.com/geosolutions_it > > *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* > > Le informazioni contenute in questo messaggio di posta elettronica e/o > nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il > loro utilizzo è consentito esclusivamente al destinatario del messaggio, > per le finalità indicate nel messaggio stesso. Qualora riceviate questo > messaggio senza esserne il destinatario, Vi preghiamo cortesemente di > darcene notizia via e-mail e di procedere alla distruzione del messaggio > stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, > divul
Re: [Geoserver-users] Securing access to OWS. Possible through oAuth 2?
If you already have a valid bearer "access_token", you can just attach it to GeoServer url. He will hit the outh2 filter (which must be configured of course) in order to validate it through an endpoint which must translate the access_token into a JSON containing several info like the expiration and validity and the associated username. You need to implement some classes in order to build your own oauth2 filter and if not exists, you will need to implement also such "token info" endpoint on the backend. For GeoServer you can get as an example this module which implements the classes to be able to authenticate against github oauth2 service provider. https://github.com/geoserver/geoserver/tree/master/src/community/security/oauth2-github About your second question, the outh2 filter allows you to associate anyone of the "UserGroupService" or "RoleService" available on GeoServer. There are some of them available around. Those services basically allow you associate a "role" to a "username". Again, if you have a custom service for that you might need to implement your custom "RoleService". For GeoNode we implemented a simple REST API with DJango that allows you to get the user roles via REST, and used this service https://github.com/geoserver/geoserver/blob/master/src/community/authkey/src/main/java/org/geoserver/security/GeoServerRestRoleService.java to parse them. You can find the full setup guide with explanation on how to they interact and how to configure them here: 1. http://docs.geoserver.org/latest/en/user/community/oauth2/index.html 2. http://docs.geonode.org/en/latest/tutorials/admin/geoserver_geonode_security/index.html#setup-of-the-geonode-rest-role-service The second link also shows how GeoFence Plugin has been integrated on GeoNode. Such plugin allows you to have much more granular access rules for the GeoServer resources. Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Thu, Jan 12, 2017 at 4:22 PM, Max Stephan <m...@maxstephan.com> wrote: > Hi Alessio, > > in our setup the user authenticates in the Web Application which is > managed through 'passport'. He receives an oAuth2 token when authentication > was successful. > > We would like to use that same token for Geoserver as well. In order to do > that I assume we would have to verify that authenticity of that token > somehow. Is that what you mean by creating a small custom extension? Is > there a guide as to which steps need to be taken for this? > > Lastly, how would I assign certain permissions for example layer level > restrictions for a user authenticated through oAuth2? > > > Kind regards, > > Max > -- > *Von
Re: [Geoserver-users] Securing access to OWS. Possible through oAuth 2?
Hi Max, oauth2 can allow you to do this since in the end it relies on generated access_tokens which are more or less similar to the fixed keys of the authkey module. The difference is that setting up the oauth2 is much more complex, but it also gives you more security and reliability (as an instance the access_tokens are generated and are associated to expiring sessions instead of being permanent as for the authkey module). The problem is that actually you need an oauth2 service provider of course. If you want to implement your custom oauth2 service provider, then you might need to create also a small custom extension of the GeoServer plugin. Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Thu, Jan 12, 2017 at 2:02 PM, Max Stephan <m...@maxstephan.com> wrote: > Hi, > > we need to secure resources within our Geoserver on a layer or service > level. Is it possible to achieve this using the oAuth2 community module? If > yes, how would I go about doing this? > > > I want to do this in an automated way, i.e. I wouldn't want the user to > first sign in to Geoserver to then be able to use the respective services > or layers in the web application. > > If oAuth2 is not possible what other ways exist to achieve this? > > > I see the Key authentication module for example ( > http://docs.geoserver.org/stable/en/user/community/authkey/index.html) > but not sure if that would provide the right level of security. > > > Kind regards and thanks in advance, > > Max Stephan > Key authentication module — GeoServer 2.10.x User Manual > <http://docs.geoserver.org/stable/en/user/community/authkey/index.html> > docs.geoserver.org > Key authentication module¶ The authkey module for GeoServer allows for a > very simple authentication protocol designed for OGC clients that cannot > handle any kind of ... > > > > -- > Developer Access Program for Intel Xeon Phi Processors > Access to Intel Xeon Phi processor-based developer platforms. > With one year of Intel Parallel Studio XE. > Training and support from Colfax. > Order your platform today. http://sdm.link/xeonphi > ___ > Geoserver-users mailing list > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > > -- Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi___
Re: [Geoserver-users] backup and restore extension prevent geoserver to run
Hello, yes, as far as they are stored on your geoserver data dir, the plugin does the backup of everything except raw data, temporary files and old logs. Currently there is also an advanced functionality allowing a user to store passwords and connection parameters on external property files and use placeholders in order to easily migrate the environment from a system to another one. http://docs.geoserver.org/latest/en/user/community/backuprestore/configtemplate.html Full documentation on the plugin can be found here instead: http://docs.geoserver.org/latest/en/user/community/backuprestore/index.html Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Thu, Nov 17, 2016 at 7:51 PM, am <asd5...@gmail.com> wrote: > wow..thanks it was my mistake. thanks very much, now it works fine.which > parameters does this plugin backups?deos it backup passwords of datasources > and etc? > > > > -- > View this message in context: http://osgeo-org.1560.x6. > nabble.com/backup-and-restore-extension-prevent-geoserver- > to-run-tp5294375p5296326.html > Sent from the GeoServer - User mailing list archive at Nabble.com. > > > -- > ___ > Geoserver-users mailing list > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] backup and restore extension prevent geoserver to run
7 09:32:50 | at org.geoserver.security.password.ConfigurationPasswordEncryptionHelper.decode(ConfigurationPasswordEncryptionHelper.java:154) INFO | jvm 1| 2016/11/17 09:32:50 | at org.geoserver.config.util.XStreamPersister$StoreInfoConverter.doUnmarshal(XStreamPersister.java:1640) INFO | jvm 1| 2016/11/17 09:32:50 | at com.thoughtworks.xstream.converters.reflection.AbstractReflectionConverter.unmarshal(AbstractReflectionConverter.java:257) INFO | jvm 1| 2016/11/17 09:32:50 | at com.thoughtworks.xstream.core.TreeUnmarshaller.convert(TreeUnmarshaller.java:72) INFO | jvm 1| 2016/11/17 09:32:50 | ... 127 more Which *may* be caused by a connection problem. Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Thu, Nov 17, 2016 at 9:40 AM, Brad Hards <br...@frogmouth.net> wrote: > The log tells you that you have a 32-bit vs 64-bit mismatch. > > > > > > -- > ___ > Geoserver-users mailing list > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] backup and restore extension prevent geoserver to run
Hi, getting the plugin zip file again from http://ares.boundlessgeo.com/geoserver/ should fix your issue automatically now. Please let me know how it goes. -A. Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Tue, Nov 15, 2016 at 9:24 PM, am <asd5...@gmail.com> wrote: > Hi, > Sorry for my late answer, Can you please tell me where to add those > lines?then I'll provide log data. > thanks > > > > -- > View this message in context: http://osgeo-org.1560.x6. > nabble.com/backup-and-restore-extension-prevent-geoserver- > to-run-tp5294375p5295921.html > Sent from the GeoServer - User mailing list archive at Nabble.com. > > > -- > ___ > Geoserver-users mailing list > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] backup and restore extension prevent geoserver to run
Just created JIRA issue for that. The fixes should be available from tomorrow on the plugin zip file. Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Mon, Nov 14, 2016 at 10:13 AM, Alessio Fabiani < alessio.fabi...@geo-solutions.it> wrote: > Oh, I see the issue. > > The plugin fails while trying to access your temp folder because the > property "java.io.tmpdir" returns null. > > Resource root = Resources.fromPath(System.getProperty("java.io.tmpdir", > ".")); > > The quick fix for you to continue testing is to add the following property > to the JVM OPTS > > *-Djava.io.tmpdir=/path/to/tmpdir* > > Thanks again and please let me know how it goes. > > Best Regards, > Alessio Fabiani. > > == > GeoServer Professional Services from the experts! > Visit http://goo.gl/it488V for more information. > == > > Ing. Alessio Fabiani > @alfa7691 > Founder/Technical Lead > > GeoSolutions S.A.S. > Via di Montramito 3/A > 55054 Massarosa (LU) > Italy > phone: +39 0584 962313 > fax: +39 0584 1660272 > mob: +39 331 6233686 > > http://www.geo-solutions.it > http://twitter.com/geosolutions_it > > --- > > *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* > > Le informazioni contenute in questo messaggio di posta elettronica e/o > nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il > loro utilizzo è consentito esclusivamente al destinatario del messaggio, > per le finalità indicate nel messaggio stesso. Qualora riceviate questo > messaggio senza esserne il destinatario, Vi preghiamo cortesemente di > darcene notizia via e-mail e di procedere alla distruzione del messaggio > stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, > divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od > utilizzarlo per finalità diverse, costituisce comportamento contrario ai > principi dettati dal D.Lgs. 196/2003. > > > > The information in this message and/or attachments, is intended solely for > the attention and use of the named addressee(s) and may be confidential or > proprietary in nature or covered by the provisions of privacy act > (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection > Code).Any use not in accord with its purpose, any disclosure, reproduction, > copying, distribution, or either dissemination, either whole or partial, is > strictly forbidden except previous formal approval of the named > addressee(s). If you are not the intended recipient, please contact > immediately the sender by telephone, fax or e-mail and delete the > infor
Re: [Geoserver-users] backup and restore extension prevent geoserver to run
Oh, I see the issue. The plugin fails while trying to access your temp folder because the property "java.io.tmpdir" returns null. Resource root = Resources.fromPath(System.getProperty("java.io.tmpdir", ".")); The quick fix for you to continue testing is to add the following property to the JVM OPTS *-Djava.io.tmpdir=/path/to/tmpdir* Thanks again and please let me know how it goes. Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Fri, Nov 11, 2016 at 10:11 PM, am <asd5...@gmail.com> wrote: > Hi, > I tested another directory and here is the log file. > > https://drive.google.com/file/d/0BxvcQH3YLKVlMmVjRmd3SlhYTTA/ > view?usp=sharing > > I could not upload it here. It seems it is because of size limitation. > anyway It is on my google drive.I hope it helps. I also changed drive and I > don't think it is because of write protection because the error is > "java.lang.IllegalArgumentException: Contains invalid . path:" > > > > -- > View this message in context: http://osgeo-org.1560.x6. > nabble.com/backup-and-restore-extension-prevent-geoserver- > to-run-tp5294375p5295403.html > Sent from the GeoServer - User mailing list archive at Nabble.com. > > > -- > Developer Access Program for Intel Xeon Phi Processors > Access to Intel Xeon Phi processor-based developer platforms. > With one year of Intel Parallel Studio XE. > Training and support from Colfax. > Order your platform today. http://sdm.link/xeonphi > ___ > Geoserver-users mailing list > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] backup and restore extension prevent geoserver to run
Hello Simone, just tested it. This is what you get in case you try to save the backup into a write protected folder [image: Inline image 1] Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Fri, Nov 11, 2016 at 10:40 AM, Simone Giannecchini < simone.giannecch...@geo-solutions.it> wrote: > Guys, > jumping into the discussion, so excuse me if I threw in some nonsense. > > I believe this is a file permission issue. I would check the logs to > make sure there is no related error. > > On the other hand Alessio I would give a try to creating back-up in a > non writable location or a location where we have limited writing > rights. > > > Regards, > Simone Giannecchini > == > GeoServer Professional Services from the experts! > Visit http://goo.gl/it488V for more information. > == > Ing. Simone Giannecchini > @simogeo > Founder/Director > > GeoSolutions S.A.S. > Via di Montramito 3/A > 55054 Massarosa (LU) > Italy > phone: +39 0584 962313 > fax: +39 0584 1660272 > mob: +39 333 8128928 > > http://www.geo-solutions.it > http://twitter.com/geosolutions_it > > --- > AVVERTENZE AI SENSI DEL D.Lgs. 196/2003 > Le informazioni contenute in questo messaggio di posta elettronica e/o > nel/i file/s allegato/i sono da considerarsi strettamente riservate. > Il loro utilizzo è consentito esclusivamente al destinatario del > messaggio, per le finalità indicate nel messaggio stesso. Qualora > riceviate questo messaggio senza esserne il destinatario, Vi preghiamo > cortesemente di darcene notizia via e-mail e di procedere alla > distruzione del messaggio stesso, cancellandolo dal Vostro sistema. > Conservare il messaggio stesso, divulgarlo anche in parte, > distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità > diverse, costituisce comportamento contrario ai principi dettati dal > D.Lgs. 196/2003. > > The information in this message and/or attachments, is intended solely > for the attention and use of the named addressee(s) and may be > confidential or proprietary in nature or covered by the provisions of > privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New > Data Protection Code).Any use not in accord with its purpose, any > disclosure, reproduction, copying, distribution, or either > dissemination, either whole or partial, is strictly forbidden except > previous formal approval of the named addressee(s). If you are not the > intended recipient, please contact immediately the sender by > telephone, fax or e-mail and delete the information in this message > that has been received in error. The sender does not give any war
Re: [Geoserver-users] backup and restore extension prevent geoserver to run
Hi, thanks for testing it. Give me some time to try to reproduce the issue on my Windows machine. I'll give you feedbacks as soon as possible. Alessio. Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Thu, Nov 10, 2016 at 4:08 PM, am <asd5...@gmail.com> wrote: > Hi, > I tested all the paths you gave me, but the same error appears. I changed > the derive from c to "c:\a.zip" and it created a a.zip file but it has 0 > size. > Is there any logs that I can provide? > > About email address I changed it to my gmail address. I am waiting for new > confirmation email,I hope it fixes soon. > Thanks very much > > > > -- > View this message in context: http://osgeo-org.1560.x6. > nabble.com/backup-and-restore-extension-prevent-geoserver- > to-run-tp5294375p5295166.html > Sent from the GeoServer - User mailing list archive at Nabble.com. > > > -- > Developer Access Program for Intel Xeon Phi Processors > Access to Intel Xeon Phi processor-based developer platforms. > With one year of Intel Parallel Studio XE. > Training and support from Colfax. > Order your platform today. http://sdm.link/xeonphi > ___ > Geoserver-users mailing list > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] backup and restore extension prevent geoserver to run
By the way, notice that gmail is keeping mark your address as spam with the following message *Why is this message in Spam?* It has a from address in yahoo.com but has failed yahoo.com's required tests for authentication. You may want to double check? Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Thu, Nov 10, 2016 at 3:10 PM, Alessio Fabiani < alessio.fabi...@geo-solutions.it> wrote: > Mmm, that's quite strange, I will investigate more on this. > > Can you please try ths one? > > /WINDOWS/system32/config/systemprofile/AppData/a.zip > > By the way, are you sure the path you specified is accessible by the > process? > > Would be possible for you to create a C:\temp folder and try also the path > > /temp/a.zip > > If the above examples work, that means that the code must better manage > Windows-like paths. > > Thanks for your feedbacks, > > Alessio. > > > > Best Regards, > Alessio Fabiani. > > == > GeoServer Professional Services from the experts! > Visit http://goo.gl/it488V for more information. > == > > Ing. Alessio Fabiani > @alfa7691 > Founder/Technical Lead > > GeoSolutions S.A.S. > Via di Montramito 3/A > 55054 Massarosa (LU) > Italy > phone: +39 0584 962313 > fax: +39 0584 1660272 > mob: +39 331 6233686 > > http://www.geo-solutions.it > http://twitter.com/geosolutions_it > > --- > > *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* > > Le informazioni contenute in questo messaggio di posta elettronica e/o > nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il > loro utilizzo è consentito esclusivamente al destinatario del messaggio, > per le finalità indicate nel messaggio stesso. Qualora riceviate questo > messaggio senza esserne il destinatario, Vi preghiamo cortesemente di > darcene notizia via e-mail e di procedere alla distruzione del messaggio > stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, > divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od > utilizzarlo per finalità diverse, costituisce comportamento contrario ai > principi dettati dal D.Lgs. 196/2003. > > > > The information in this message and/or attachments, is intended solely for > the attention and use of the named addressee(s) and may be confidential or > proprietary in nature or covered by the provisions of privacy act > (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection > Code).Any use not in accord with its purpose, any disclosure, reproduction, > copying, distribution, or either dissemination, either whole or partial, is > st
Re: [Geoserver-users] backup and restore extension prevent geoserver to run
Mmm, that's quite strange, I will investigate more on this. Can you please try ths one? /WINDOWS/system32/config/systemprofile/AppData/a.zip By the way, are you sure the path you specified is accessible by the process? Would be possible for you to create a C:\temp folder and try also the path /temp/a.zip If the above examples work, that means that the code must better manage Windows-like paths. Thanks for your feedbacks, Alessio. Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Thu, Nov 10, 2016 at 2:15 PM, am <asd5...@yahoo.com> wrote: > Hi, > I tested this address > "C:\WINDOWS\system32\config\systemprofile\AppData\a.zip" and it gives > "java.lang.IllegalArgumentException: Contains invalid . path:" also this > one gives error "d:\\a.zip" > > thanks for your help > > > > -- > View this message in context: http://osgeo-org.1560.x6. > nabble.com/backup-and-restore-extension-prevent-geoserver- > to-run-tp5294375p5295142.html > Sent from the GeoServer - User mailing list archive at Nabble.com. > > > -- > Developer Access Program for Intel Xeon Phi Processors > Access to Intel Xeon Phi processor-based developer platforms. > With one year of Intel Parallel Studio XE. > Training and support from Colfax. > Order your platform today. http://sdm.link/xeonphi > ___ > Geoserver-users mailing list > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] backup and restore extension prevent geoserver to run
The path C:\Program Files (x86)\GeoServer 2.10.0\data_dir\a.zip should work. Maybe try first with paths without spaces or also something like /temp/a.zip (if a temp folder exists on your PC). I will double check locally if Windows paths cause issues. I was pretty sure not, but I will perform more tests and eventually commit a patch for this use case. Thanks and let me know how it goes in the meantime, Alessio Fabiani. Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Wed, Nov 9, 2016 at 11:32 AM, am <asd5...@yahoo.com> wrote: > thanks it is working, > But can you please give me a hint how to select target archive full path?I > added this "C:\Program Files (x86)\GeoServer 2.10.0\data_dir" but it says > "java.lang.Exception: Backup Archive File is Mandatory and should not be a > Directory or URI." then I added "C:\Program Files (x86)\GeoServer > 2.10.0\data_dir\a.zip" and again another exception. What should I write > here? > > > > -- > View this message in context: http://osgeo-org.1560.x6. > nabble.com/backup-and-restore-extension-prevent-geoserver- > to-run-tp5294375p5294977.html > Sent from the GeoServer - User mailing list archive at Nabble.com. > > > -- > Developer Access Program for Intel Xeon Phi Processors > Access to Intel Xeon Phi processor-based developer platforms. > With one year of Intel Parallel Studio XE. > Training and support from Colfax. > Order your platform today. http://sdm.link/xeonphi > ___ > Geoserver-users mailing list > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] backup and restore extension prevent geoserver to run
Hi, it seems to be fixed now http://ares.boundlessgeo.com/geoserver/2.10.x/community-latest/geoserver-2.10-SNAPSHOT-backup-restore-plugin.zip Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Tue, Nov 8, 2016 at 9:44 PM, am <asd5...@yahoo.com> wrote: > Dear Alessio, > Thanks for your help, In fact I am using version 2.10 and I just copied > files into applications lib folder, like other extensions. I hope the > version 10 issue fixes soon.If you need more information I will be happy to > provide. > Thanks very much > > > > -- > View this message in context: http://osgeo-org.1560.x6. > nabble.com/backup-and-restore-extension-prevent-geoserver- > to-run-tp5294375p5294887.html > Sent from the GeoServer - User mailing list archive at Nabble.com. > > > -- > Developer Access Program for Intel Xeon Phi Processors > Access to Intel Xeon Phi processor-based developer platforms. > With one year of Intel Parallel Studio XE. > Training and support from Colfax. > Order your platform today. http://sdm.link/xeonphi > ___ > Geoserver-users mailing list > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] backup and restore extension prevent geoserver to run
Hello, the problem should be fixed now. Please try again by using the following plugins: GeoServer Master (2.11.x) -> http://ares.boundlessgeo.com/geoserver/master/community-latest/geoserver-2.11-SNAPSHOT-backup-restore-plugin.zip GeoServer (2.9.x) -> http://ares.boundlessgeo.com/geoserver/2.9.x/community-latest/geoserver-2.9-SNAPSHOT-backup-restore-plugin.zip GeoServer 2.10.x build is currently failing. The plugin will be available as soon as the problem will be fixed. Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Mon, Nov 7, 2016 at 6:51 PM, Alessio Fabiani < alessio.fabi...@geo-solutions.it> wrote: > Hello, > it looks like a packaging issue. > > How did you installed the backup and restore plugin? And on which > GeoServer version? > > It may be a packaging issue. If this is the case the problem can be solved > by editing the GeoServer deployment file. I'll double check on my side > though. > > > > Best Regards, > Alessio Fabiani. > > == > GeoServer Professional Services from the experts! > Visit http://goo.gl/it488V for more information. > == > > Ing. Alessio Fabiani > @alfa7691 > Founder/Technical Lead > > GeoSolutions S.A.S. > Via di Montramito 3/A > 55054 Massarosa (LU) > Italy > phone: +39 0584 962313 > fax: +39 0584 1660272 > mob: +39 331 6233686 > > http://www.geo-solutions.it > http://twitter.com/geosolutions_it > > --- > > *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* > > Le informazioni contenute in questo messaggio di posta elettronica e/o > nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il > loro utilizzo è consentito esclusivamente al destinatario del messaggio, > per le finalità indicate nel messaggio stesso. Qualora riceviate questo > messaggio senza esserne il destinatario, Vi preghiamo cortesemente di > darcene notizia via e-mail e di procedere alla distruzione del messaggio > stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, > divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od > utilizzarlo per finalità diverse, costituisce comportamento contrario ai > principi dettati dal D.Lgs. 196/2003. > > > > The information in this message and/or attachments, is intended solely for > the attention and use of the named addressee(s) and may be confidential or > proprietary in nature or covered by the provisions of privacy act > (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection > Code).Any use not in accord with its purpose, any disclosure, reproduction, > copying, distribution, or either dissemination, either whole or part
Re: [Geoserver-users] backup and restore extension prevent geoserver to run
Hello, it looks like a packaging issue. How did you installed the backup and restore plugin? And on which GeoServer version? It may be a packaging issue. If this is the case the problem can be solved by editing the GeoServer deployment file. I'll double check on my side though. Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Fri, Nov 4, 2016 at 6:20 PM, am <asd5...@yahoo.com> wrote: > Hi, > I was very interested in backup and restore extension and I tried to set it > up, But I faced a problem. At first it logged that it is failed to load > because of leak of java.lang.NoClassDefFoundError: > org/springframework/retry/policy/RetryContextCache > > this is log file > > > > then I downloaded and added this into lib folder > spring-retry-1.1.4.RELEASE.jar and then another error which says > java.lang.NoClassDefFoundError: > org/springframework/batch/core/listener/MulticasterBatchListener > > java.lang.ClassNotFoundException: > org.springframework.beans.factory.config.EmbeddedValueResolver > I looked those classes and then added these files > javax.batch-api-1.0-b02.jar and spring-context-4.3.3.RELEASE.jar but > another > error showed up, anyway It seems some dependencies are not included into > extension,Is there any way to find a solution for it? > thanks very much > > > > -- > View this message in context: http://osgeo-org.1560.x6. > nabble.com/backup-and-restore-extension-prevent-geoserver- > to-run-tp5294375.html > Sent from the GeoServer - User mailing list archive at Nabble.com. > > > -- > Developer Access Program for Intel Xeon Phi Processors > Access to Intel Xeon Phi processor-based developer platforms. > With one year of Intel Parallel Studio XE. > Training and support from Colfax. > Order your platform today. http://sdm.link/xeonphi > ___ > Geoserver-users mailing list > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] GeoWebCache configuration in GeoNode
You can just use JVM properties like -DGEOWEBCACHE_CACHE_DIR= and -DGEOSERVER_DATA_DIR= in order to move your folders somewhere else in the system. Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Wed, Sep 7, 2016 at 6:05 PM, Paolo Pasquali <paolo.pasqu...@gmail.com> wrote: > Ralph, > the GWC documentation says so. I guess that if I want to set a different > folder for the cached tiles I have to add this to the web.xml: > > >GEOWEBCACHE_CACHE_DIR >/my/new/gwc/folder/ > > > By default it is not set in web.xml. And if it is not set, according to > the documentation, the gwc tiles folder should be in the geoserver/data > folder. But it is not. > I have a lot of cached tiles somewhere and I want to move them but I > cannot find them. > > > > > > On Wed, Sep 7, 2016 at 5:40 PM, Ralph Dell <rd...@catawbacountync.gov> > wrote: > >> I am not familiar with geonode so this may or may not be helpful. A quick >> web search indicates to me the when setting up geoserver for geonode >> geoserver runs under tomcat. If your geoserver is running under tomcat gwc >> is set up in /webapps/geoserver/WEB_INF/web.xml and will look something >> like this >> >> >>GEOSERVER_DATA_DIR >>C:\geoserver\data_dir >> >> >> -Original Message- >> From: Paolo Pasquali [mailto:paolo.pasqu...@gmail.com] >> Sent: Wednesday, September 07, 2016 11:23 AM >> To: geoserver-users@lists.sourceforge.net >> Subject: [Geoserver-users] GeoWebCache configuration in GeoNode >> >> I have a GeoNode 2.4.x running with a GeoServer 2.7-snapshot. >> >> Since there is no gwc folder inside the GeoServer data folder I wonder >> where GWC stores the cached tiles. In addition I can't find the >> geowebcache.xml file. >> >> Thanks in advanced for your help. >> >> Best, >> >> Paolo >> >> >> >> -- >> View this message in context: http://osgeo-org.1560.x6.nabbl >> e.com/GeoWebCache-configuration-in-GeoNode-tp5284549.html >> Sent from the GeoServer - User mailing list archive at Nabble.com. >> >> >> -- >> ___ >> Geoserver-users mailing list >> Geoserver-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/geoserver-users >> > > > > -- > > ___ > Geoserver-users mailing list > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > > -- ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Disable / alter Geoserver web admin interface for external users
If the instances are different maybe you can just remove the WEB module JARs from the production one. Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Mon, Jul 11, 2016 at 3:53 PM, Chris Buckmaster < chris.buckmas...@runnymede.gov.uk> wrote: > Thanks for the advice Jonathan! > > > > > > *From:* Jonathan Moules [mailto:jonathan-li...@lightpear.com] > *Sent:* 11 July 2016 14:52 > *To:* Chris Buckmaster > *Cc:* geoserver-users@lists.sourceforge.net > *Subject:* RE: [Geoserver-users] Disable / alter Geoserver web admin > interface forexternal users > > > > Hi Chris, > > In that scenario my first thought would be of having multiple instances of > GeoServer - a development one (which has the web interface and you can > administer), and then a production one which has the web-interface > disabled. This removes the risk of mistakes in administering affecting > production users. > > Alternately, you could also indeed do IIS authentication - just be sure to > only require authentication for requests to the /web/ path. This won't > impact any access to your data as they come through other paths. > If you *do* want (some) other people to be able to administer the system, > but only specific layers, then Jim's solution would be the best. If you > want to have everything (for you and other admins) or nothing (for everyone > else), then the IIS option will probably be simplest. > > Cheers, > Jonathan > > > On Mon, 11 Jul 2016 14:22:36 +0100 *Chris > Buckmaster<chris.buckmas...@runnymede.gov.uk > <chris.buckmas...@runnymede.gov.uk>>* wrote > > Hi Jonathan > > > > Yes I did notice that but do need access to it within my internal network > so I can carry out admin work, I also thought about adding authentication > in Windows IIS but probably wouldn’t be a good approach as it might affect > access to the data layers themselves. > > > > Will have a look at the information provided by Jim in the previous post. > > > > Chris > > > > > > *From:* Jonathan Moules [mailto:jonathan-li...@lightpear.com] > *Sent:* 11 July 2016 14:20 > *To:* Chris Buckmaster > *Cc:* geoserver-users@lists.sourceforge.net > *Subject:* Re: [Geoserver-users] Disable / alter Geoserver web admin > interface forexternal users > > > > Hi Chris, > Have you tried the two options at the bottom of this page: > > http://docs.geoserver.org/latest/en/user/production/config.html#disable-the-geoserver-web-administration-interface > > They will allow you to disable the web admin interface entirely I believe. > > Cheers, > Jonathan > > > On Mon, 11
Re: [Geoserver-users] [Geotools-devel] Call for Online MiniSprint
+1 Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Wed, Jul 6, 2016 at 5:16 PM, Simone Giannecchini < simone.giannecch...@geo-solutions.it> wrote: > Dear All, > sorry for cross posting but I believe this is something that might > impact both users as well as developers of GetoTools and GeoServer. > > I wanted to propose an online, distributed, loosely coordinated 1 day > sprint in the short term where people can help GeoServer as well as > GeoTools with things like: > - reviewing open JIRA > - fixing bugs > - improving documentation > - doing testing and so on > - cheering the others up > > Coordination could be as simple as a google spreadsheet where people > can log what they are working on + an hangout to chat if/as needed. > This could become a recurrent event, like one a month in the future. > The goal is not to develop new features but to improve quality of code > and documentation. > > Right now I have in mind two dates: > - 22nd of July > - 29th of July > > We at GeoSolutions are happy with both dates and we will do this > anyway, to get the ball rolling. > > Looking forward to reading your feedback. I might move this email over > to a post on the GeoServer blog to gain more attention. > > Regards, > Simone Giannecchini > == > GeoServer Professional Services from the experts! > Visit http://goo.gl/it488V for more information. > == > Ing. Simone Giannecchini > @simogeo > Founder/Director > > GeoSolutions S.A.S. > Via di Montramito 3/A > 55054 Massarosa (LU) > Italy > phone: +39 0584 962313 > fax: +39 0584 1660272 > mob: +39 333 8128928 > > http://www.geo-solutions.it > http://twitter.com/geosolutions_it > > --- > AVVERTENZE AI SENSI DEL D.Lgs. 196/2003 > Le informazioni contenute in questo messaggio di posta elettronica e/o > nel/i file/s allegato/i sono da considerarsi strettamente riservate. > Il loro utilizzo è consentito esclusivamente al destinatario del > messaggio, per le finalità indicate nel messaggio stesso. Qualora > riceviate questo messaggio senza esserne il destinatario, Vi preghiamo > cortesemente di darcene notizia via e-mail e di procedere alla > distruzione del messaggio stesso, cancellandolo dal Vostro sistema. > Conservare il messaggio stesso, divulgarlo anche in parte, > distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità > diverse, costituisce comportamento contrario ai principi dettati dal > D.Lgs. 196/2003. > > The information in this message and/or attachments, is intended solely > for the attention and use of the named addressee(s) and may be >
Re: [Geoserver-users] Grid lines showing in ImageMosaic layer
So, looking at the GDAL_INFO output I suggest to retile internally the granules as square tiles (e.g.: 512x512). You can use gdal_transale -co "TILED=YES" -co "BLOCKXSIZE=512" -co "BLOCKYSIZE=512" in order to do that. This will improve a lot the performances. Moreover, generally speaking, it is not advisable to have overviews with size lower than the internal tiling. You will force the server to do unuseful extra-work other than risk to introduce artifacts. Therefore in this case overviews of size 512x512 are sufficient (2 4 8 16 32). Try if it works like this. Also, if you do the preview using an OpenLayers-like client in tiling mode, you must be sure that the browser page zoom level is 100% otherwise it may introduce unwanted lines in the middle at client side. I hope it will work just following those steps, otherwise the issue may be more serious. Also, which versions of GeoServer and GeoTools are you using? Best Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. - On Thu, Apr 21, 2016 at 3:49 PM, Jason Newmoyer < ja...@newmoyergeospatial.com> wrote: > Alessio, > > Does having the extra overviews cause an issue? I assumed its better to > have more than you need rather than less. Since at a factor of 64 or beyond > they really cost almost nothing in terms of processing or space. > > Here is the gdalinfo for one of my tiles. > > Driver: GTiff/GeoTIFF > Files: test123456789.tif > Size is 16384, 16384 > Coordinate System is: > GEOGCS["WGS 84", > DATUM["WGS_1984", > SPHEROID["WGS 84",6378137,298.257223563, > AUTHORITY["EPSG","7030"]], > AUTHORITY["EPSG","6326"]], > PRIMEM["Greenwich",0], > UNIT["degree",0.0174532925199433], > AUTHORITY["EPSG","4326"]] > Origin = (40.614871499950851,6.385383283001418) > Pixel Size = (0.044,-0.045) > Metadata: > --- > Image Structure Metadata: > COMPRESSION=YCbCr JPEG > INTERLEAVE=PIXEL > SOURCE_COLOR_SPACE=YCbCr > Corner Coordinates: > Upper Left ( 40.6148715, 6.3853833) > Lower Left ( 40.6148715, 6.3116553) > Upper Right ( 40.6885995, 6.3853833) > Lower Right ( 40.6885995, 6.3116553) > Center ( 40.6517355, 6.3485193) > Band 1 Block=16384x512 Type=Byte, ColorInterp=Red > Overviews: 8192x8192, 4096x4096, 2048x2048, 1024x1024, 512x512, 256x256, > 128x128 > Band 2 Block=16384x512 Type=Byte, ColorInterp=Green > Overviews: 8192x8192, 4096x4096, 2048x2048, 1024x1024, 512x512, 256x256, > 128x128 > Band 3 Block=16384x512 Type=Byte, ColorInterp=Blue > Overviews
[Geoserver-users] GeoServer 2.7.4 Released
GeoServer 2.7.4 released The GeoServer team is happy to announce the release of GeoServer 2.7.4 <http://geoserver.org/release/2.7.4/>. Download bundles are provided (zip <http://sourceforge.net/projects/geoserver/files/GeoServer/2.7.4/geoserver-2.7.4-bin.zip/download> , war <http://sourceforge.net/projects/geoserver/files/GeoServer/2.7.4/geoserver-2.7.4-war.zip/download> , dmg <http://sourceforge.net/projects/geoserver/files/GeoServer/2.7.4/geoserver-2.7.4.dmg/download> and exe <http://sourceforge.net/projects/geoserver/files/GeoServer/2.7.4/geoserver-2.7.4.exe/download>) along with documentation and extensions. GeoServer 2.7.3 is a maintenance release of GeoServer recommended for production deployment. Thanks to everyone taking part, submitting fixes and new functionality including: Bug - [GEOS-3228 <https://osgeo-org.atlassian.net/browse/GEOS-3228>] – Empty filter causes IndexOutOfBoundsException - [GEOS-3432 <https://osgeo-org.atlassian.net/browse/GEOS-3432>] – RESTConfig “styles” list does not get generated if a style is missing its associated sld file - [GEOS-4986 <https://osgeo-org.atlassian.net/browse/GEOS-4986>] – Creating SQL Views via RESTConfig as JSON fails - [GEOS-6768 <https://osgeo-org.atlassian.net/browse/GEOS-6768>] – externalGraphic with relative path and query parameters problem - [GEOS-7045 <https://osgeo-org.atlassian.net/browse/GEOS-7045>] – Layer Security – Catalog Mode - [GEOS-7243 <https://osgeo-org.atlassian.net/browse/GEOS-7243>] – Render (or transform) fails on Multipolygon but not on polygon - [GEOS-7256 <https://osgeo-org.atlassian.net/browse/GEOS-7256>] – Maven Cobertura plugin does not work - [GEOS-7259 <https://osgeo-org.atlassian.net/browse/GEOS-7259>] – JMS based cluster should use qualified names for Layers and Layergroups - [GEOS-7267 <https://osgeo-org.atlassian.net/browse/GEOS-7267>] – JMS Clustering should prefix Styles names with workspace - [GEOS-7295 <https://osgeo-org.atlassian.net/browse/GEOS-7295>] – OpenLayers preview does not work if authkey community module is enabled - [GEOS-7302 <https://osgeo-org.atlassian.net/browse/GEOS-7302>] – Using on the fly meta tiling in WMS request may result in rendered images not being disposed of - [GEOS-7312 <https://osgeo-org.atlassian.net/browse/GEOS-7312>] – RawDataPPIO does not close InputStreams it opens - [GEOS-7314 <https://osgeo-org.atlassian.net/browse/GEOS-7314>] – GeoTiffPPIO can return the source file of a processed coverage Improvement - [GEOS-4762 <https://osgeo-org.atlassian.net/browse/GEOS-4762>] – WCS should force usage of imageread - [GEOS-7150 <https://osgeo-org.atlassian.net/browse/GEOS-7150>] – Features counted twice for WFS queries with GeoJSON responses For a full list, see the release notes <https://osgeo-org.atlassian.net/jira/secure/ReleaseNote.jspa?projectId=1=11601> . Also, as a heads up for Oracle users, the Oracle store does not ship anymore with the JDBC driver (due to redistribution limitations imposed by Oracle). For details see the updated the oracle installation instructions here <http://docs.geoserver.org/stable/en/user/data/database/oracle.html#oracle-install> . Thanks to Alessio Fabiani (GeoSolutions) for this release. This release is made in conjunction with GeoTools 13.4 <http://geotoolsnews.blogspot.it/2015/11/geotools-134-released.html> and GeoNode 2.4 <http://geonode.org/blog/2015/11/19/geonode-2.4-released/>. http://blog.geoserver.org/2015/11/19/geoserver-2-7-4-released/ == GeoServer Professional Services from the experts! Visit http://goo.gl/NWWaa2 for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named add
[Geoserver-users] GeoServer download links temporarly broken
Hi all, just wanted to report that due to some issue with the build server, currently the download links on geoserver.org are broken and not updated. In particular 1. The http://geoserver.org/release/master/ is still pointing to 2.8.x 2. A 2.8.x nightly build is currently missing at http://ares.boundlessgeo.com/geoserver/ I guess this will be fixed as soon as the problems with Ares server are fixed. Regards, Alessio Fabiani. == GeoServer Professional Services from the experts! Visit http://goo.gl/NWWaa2 for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. -- Monitor Your Dynamic Infrastructure at Any Scale With Datadog! Get real-time metrics from all of your servers, apps and tools in one place. SourceForge users - Click here to start your Free Trial of Datadog now! http://pubads.g.doubleclick.net/gampad/clk?id=241902991=/4140___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] WCS 2.0.1 error with self made coverage
I know the exception message may be a little cryptic, but usually something like this happens when for some reason the reader is not able to access the data or the data is not well formed. We should check this cite__lisa01 coverage and also the configuration of the store. Is the tile part of someone of the GeoServer data dirs? If so, which one? == GeoServer Professional Services from the experts! Visit http://goo.gl/NWWaa2 for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. On Wed, Oct 15, 2014 at 9:04 AM, Rahkonen Jukka (Tike) jukka.rahko...@mmmtike.fi wrote: Hi, I started to experiment with WCS 2.0.1. With the demo coverage nurc__mosaic GetCoverage works. However, with my own store/layer it fails. The layer is made from two geotiff files and layer preview shows the layer and it works perfectly also as WMS through standard GIS clients. The error that I ger with request http://localhost:8080/geoserver/wcs?SERVICE=WCSVERSION=2.0.1REQUEST=GetCoverageCOVERAGEID=cite__lisa01FORMAT=image/tiff is 2014-10-15 09:55:33,389 INFO [geoserver.wcs] - Request: getServiceInfo 2014-10-15 09:55:33,390 INFO [wcs2_0.util] - Examining encoded name cite__lisa01 2014-10-15 09:55:33,390 INFO [wcs2_0.util] - Checking pair cite : lisa01 2014-10-15 09:55:33,390 INFO [wcs2_0.util] - - Namespace found cite 2014-10-15 09:55:33,391 INFO [wcs2_0.util] - - Collecting layer cite:lisa01 2014-10-15 09:55:34,368 ERROR [geoserver.ows] - org.geoserver.wcs2_0.exception.WCS20Exception: Failed to read the coverage cite__lisa01 at org.geoserver.wcs2_0.GetCoverage.run(GetCoverage.java:256) at org.geoserver.wcs2_0.DefaultWebCoverageService20.getCoverage(DefaultWebCoverageService20.java:119) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:319) at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:183) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:150) at org.geoserver.ows.util.RequestObjectLogger.invoke(RequestObjectLogger.java:55) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172) at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:202) at com.sun.proxy.$Proxy64.getCoverage(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke
Re: [Geoserver-users] [geoserver-user]call geoserver api rest by script bash
Please, send the full bash script. == GeoServer Professional Services from the experts! Visit http://goo.gl/NWWaa2 for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Wed, Jun 25, 2014 at 12:21 PM, sanguinela sanguin...@gmail.com wrote: Hi all, I have problems with calls rest of GeoServer. I would like to post some geotiff. In my bash script I compose the string and then run it with exec $nameVariable The execution of this command causes this error in GeoServer: *org.geoserver.rest.RestletException**:* *java.net.MalformedURLException**: no* *protocol:* *file :/ /* */ home /* ** The same statement if I do an echo in the terminal and then run it, everything works fine maybe there are problems with double quotes? This is the instruction: *instruction* *=* *'**curl-**v-**u**' $* *8 '**,' $* *9 '**-**XPUT**-H* *Content-type**: text / plain**-d* *file :/ /**'* *$ 7 $* *baseName* *'**' http://* *'$* *4'**: 8080* */* *GeoServer* */ rest* */ workspaces* */* *'**$ {**10}**'* */* *coveragestores* */* *'**$ {**11}**'* */* *external.geotiff* *'* *exec** $**instruction* Note: I also tried this instruction = curl-v-u $ 8 , $ 9 -XPUT-H \Content-type: text / plain\-d \file :/ / $ 7 $ baseName \'' http:// $ 4: 8080 / GeoServer / rest / workspaces / $ {10} / coveragestores / $ {11} / external.geotiff Regards. -- Open source business process management suite built on Java and Eclipse Turn processes into business applications with Bonita BPM Community Edition Quickly connect people, data, and systems into organized workflows Winner of BOSSIE, CODIE, OW2 and Gartner awards http://p.sf.net/sfu/Bonitasoft ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- Open source business process management suite built on Java and Eclipse Turn processes into business applications with Bonita BPM Community Edition Quickly connect people, data, and systems into organized workflows Winner of BOSSIE, CODIE, OW2 and Gartner awards http://p.sf.net/sfu/Bonitasoft___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
[Geoserver-users] call geoserver api rest by script bash
Hello, it is a bit difficult to understand the full CURL command you are trying to send to GeoServer from your email. What you should do in order to ingest an *external* geotiff (which means that the GeoTIFF is already present on the server and you are just providing the full path to GeoServer) is: - a *POST* to http:// server:port/geoserver/rest/workspaces/ws/coveragestores/name/external.geotiff - of a *text/plain* Content-type text, containing the following line file://full_path_to_the_geotiff_on_server Please, try checking your code again and let me know if you still have issues. Regards, Alessio. == GeoServer Professional Services from the experts! Visit http://goo.gl/NWWaa2 for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- -- Open source business process management suite built on Java and Eclipse Turn processes into business applications with Bonita BPM Community Edition Quickly connect people, data, and systems into organized workflows Winner of BOSSIE, CODIE, OW2 and Gartner awards http://p.sf.net/sfu/Bonitasoft___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
[Geoserver-users] [gsconfig] - Support for JDBC Virtual Tables publishing
Dear all, the pull request #75 [1], contains gsconfig improvements for the publishing of new JDBC Virtual Tables on GeoServer. Cheers, Alessio. - [1] https://github.com/boundlessgeo/gsconfig/pull/75 == Meet us at GEO Business 2014! in London! Visit http://goo.gl/fES3aK for more information. Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- -- The best possible search technologies are now affordable for all companies. Download your FREE open source Enterprise Search Engine today! Our experts will assist you in its installation for $59/mo, no commitment. Test it for FREE on our Cloud platform anytime! http://pubads.g.doubleclick.net/gampad/clk?id=145328191iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] WMS over SSL, Possible?
Hello Tukang, I don't think this is an errori specific to GeoServer or WMS, it seems to me more likely a client issue. Maybe you should try to get more info on the OpenLayers mailing list. My guess is that the browser is not able to recognize the certificate and you get a worning. Maybe a possible solution could be to use a proxy that downloads the tiles from the secured connection and send them back to your client over HTTP unless you have specific security constraints on the image contents. == Meet us at GEO Business 2014! in London! Visit http://goo.gl/fES3aK for more information. Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Thu, Apr 17, 2014 at 9:18 AM, Tukang tkgs...@gmail.com wrote: Greetings, I'm new to GeoServer and recently I've managed to enable SSL on Tomcat using a signed certificate and I am able to access and login to GeoServer (https://mydomain:8443/geoserver/web) and view the maps as usual. I also have an external OpenLayers map (basically like this example: http://geoserver.geo-solutions.it/edu/en/use_ol/ol_map.html) that queries GeoServer's WMS service for loading layers which works fine under http but unfortunately not over https. I noticed in Firebug that for every request to the WMS endpoint at https://mydomain:8443/geoserver/wms the response is a 501 Not Implemented. If I set the endpoint to http://mydomain:8080/geoserver/wms the layers load normally. Is there a configuration that I am missing? How do I make WMS working with OpenLayers over SSL? Thanks! Tukang -- View this message in context: http://osgeo-org.1560.x6.nabble.com/WMS-over-SSL-Possible-tp5135517.html Sent from the GeoServer - User mailing list archive at Nabble.com. -- Learn Graph Databases - Download FREE O'Reilly Book Graph Databases is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/NeoTech ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- Learn Graph Databases - Download FREE O'Reilly Book Graph Databases is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/NeoTech___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] wps request builder
Hello Manjula, please, refer to this guide in order to optimize your GeoServer environment http://docs.geoserver.org/stable/en/user/production/index.html Regards, Alessio. == Meet us at GEO Business 2014! in London! Visit http://goo.gl/fES3aK for more information. Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Wed, Apr 2, 2014 at 1:49 PM, Manjula kamarajugaddamanj...@gmail.comwrote: tell me the idel configuration of the jvm ... this is my jdk version C:\Program Files (x86)\Java\jdk1.7.0_25 -- View this message in context: http://osgeo-org.1560.x6.nabble.com/wps-request-builder-tp5131461p5132658.html Sent from the GeoServer - User mailing list archive at Nabble.com. -- ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Coverage REST error (image mosaic) in geoserver 2.4.x
Hello all, I'm going to test this functionality in these days. I have to work on a project managing Image Mosaics through the REST interface. Can you please send me some details on you testing use cases? regards, Alessio. == Meet us at GEO Business 2014! in London! Visit http://goo.gl/fES3aK for more information. Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Fri, Mar 21, 2014 at 8:33 AM, wwsmith wwsm...@web.de wrote: Hi all, hi Andrea, I've tested with the new geoserver version 2.5.0, too - the same REST behavior. Should I open a jira issue? @Andrea: please, can you have a look on this problem? Thanks!! Best Wolfram -- View this message in context: http://osgeo-org.1560.x6.nabble.com/Coverage-REST-error-image-mosaic-in-geoserver-2-4-x-tp5129850p5130243.html Sent from the GeoServer - User mailing list archive at Nabble.com. -- Learn Graph Databases - Download FREE O'Reilly Book Graph Databases is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/13534_NeoTech ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- Learn Graph Databases - Download FREE O'Reilly Book Graph Databases is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/13534_NeoTech___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] White lines in merged GeoTIFF files after ImageMosaicing
Hello Ammar, sorry for the delay. Looking at your screenshots my guess is that the overlapping granules may have the nodata not correctly setted, and in any case my understanding is that in your mosaic you have configured the transparency on black color but the white nodata sections overlapping are opaque, and so generating such strange white lines effect. Alessio. == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Mon, Jan 27, 2014 at 11:42 AM, Ammar ammar8...@yahoo.com wrote: Alessio, Thank you for your reply. At first, I thought there are some granules missing from the mosaic but now after looking at the mosaic index, it seems that the images are overlapping! Please take a look at the attached screen shot and tell me if they are clear and I added the index the right way or if I need to re-take another snapshots! Regards, Ammar -- *From:* Alessio Fabiani alessio.fabi...@geo-solutions.it *To:* Ammar ammar8...@yahoo.com *Cc:* geoserver-users@lists.sourceforge.net geoserver-users@lists.sourceforge.net *Sent:* Monday, January 27, 2014 10:06 AM *Subject:* Re: [Geoserver-users] White lines in merged GeoTIFF files after ImageMosaicing Hi Ammar, from the screenshot it seems to me like some granules are missing from the mosaic. Is that possible? Or maybe the imagesa are overlapping? Can you please send a screenshot with the granules seamlines on top of it? (This is easily doable by loading the mosaic index as a vectorial layer on GeoServer) Alessio. == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Sun, Jan 26, 2014 at 9:13 PM, Ammar ammar8...@yahoo.com wrote: Hello list, The white lines problem has been solved by using a lossless compression, in my case LZW with a predictor of 2. Now, when I am loading the 21 images into a software such as QGIS, I get a perfect image (screen shot #1) but when I upload the images into GeoServer and put them either in a layer group or in an Image Mosaic, I get strips of white tiles (screen shot #2). Any ideas? //Ammar -- *From:* Ammar ammar8...@yahoo.com *To:* Jonathan Moules jonathanmou...@warwickshire.gov.uk; geoserver-users@lists.sourceforge.net geoserver-users@lists.sourceforge.net *Sent:* Tuesday, January 21, 2014 12:40 PM *Subject:* Re: [Geoserver-users] White lines in merged GeoTIFF files after ImageMosaicing Hello Jonathan, I merged all the files in one huge BIGTIFF image (70 x 656000) and it came out perfect with no gaps, lines or distortions. The problem with this approach is that I tried to create overviews for the image and it took 4 continuous days of gdaladdo running without any progress until I had to cancel the gdaladdo operation. So, what I am saying is, the original images don't have gaps or no data in them. I am suspecting that the problem occurs because of gdaladdo. I have tested on smaller images, with and without overviews and the images that have no overviews came perfect with no lines or gaps! Any ideas, tips or suggestions on other options or alternatives methods to creating overviews by gdaladdo? //Ammar -- *From:* Jonathan Moules jonathanmou...@warwickshire.gov.uk *To:* Ammar ammar8...@yahoo.com; geoserver-users@lists.sourceforge.net *Sent:* Tuesday, January 14, 2014 12:17 PM *Subject:* Re: [Geoserver-users] White lines in merged GeoTIFF files after ImageMosaicing Hi Ammar. Please keep the discussion on-list, that way prospectively others can help too. If the data does it in QGIS too then it's almost certainly a no-data issue. I can't suggest how to resolve that as I don't know anything about your dataset. Regards, Jonathan On 14 January 2014 11:10, Ammar ammar8...@yahoo.com wrote: Jonathan, First, I am really sorry about the last name thing. Probably I was working like a mule at the time I created the post. When I load the files directly into QGIS, I get the same white lines and distortions. When zooming in, the lines disappear at certain levels then after zooming in more, I get them back! It is like they are coming and going. The thing is, the lines happen exactly at the borders of each of the 21
Re: [Geoserver-users] White lines in merged GeoTIFF files after ImageMosaicing
Hi Ammar, from the screenshot it seems to me like some granules are missing from the mosaic. Is that possible? Or maybe the imagesa are overlapping? Can you please send a screenshot with the granules seamlines on top of it? (This is easily doable by loading the mosaic index as a vectorial layer on GeoServer) Alessio. == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Sun, Jan 26, 2014 at 9:13 PM, Ammar ammar8...@yahoo.com wrote: Hello list, The white lines problem has been solved by using a lossless compression, in my case LZW with a predictor of 2. Now, when I am loading the 21 images into a software such as QGIS, I get a perfect image (screen shot #1) but when I upload the images into GeoServer and put them either in a layer group or in an Image Mosaic, I get strips of white tiles (screen shot #2). Any ideas? //Ammar -- *From:* Ammar ammar8...@yahoo.com *To:* Jonathan Moules jonathanmou...@warwickshire.gov.uk; geoserver-users@lists.sourceforge.net geoserver-users@lists.sourceforge.net *Sent:* Tuesday, January 21, 2014 12:40 PM *Subject:* Re: [Geoserver-users] White lines in merged GeoTIFF files after ImageMosaicing Hello Jonathan, I merged all the files in one huge BIGTIFF image (70 x 656000) and it came out perfect with no gaps, lines or distortions. The problem with this approach is that I tried to create overviews for the image and it took 4 continuous days of gdaladdo running without any progress until I had to cancel the gdaladdo operation. So, what I am saying is, the original images don't have gaps or no data in them. I am suspecting that the problem occurs because of gdaladdo. I have tested on smaller images, with and without overviews and the images that have no overviews came perfect with no lines or gaps! Any ideas, tips or suggestions on other options or alternatives methods to creating overviews by gdaladdo? //Ammar -- *From:* Jonathan Moules jonathanmou...@warwickshire.gov.uk *To:* Ammar ammar8...@yahoo.com; geoserver-users@lists.sourceforge.net *Sent:* Tuesday, January 14, 2014 12:17 PM *Subject:* Re: [Geoserver-users] White lines in merged GeoTIFF files after ImageMosaicing Hi Ammar. Please keep the discussion on-list, that way prospectively others can help too. If the data does it in QGIS too then it's almost certainly a no-data issue. I can't suggest how to resolve that as I don't know anything about your dataset. Regards, Jonathan On 14 January 2014 11:10, Ammar ammar8...@yahoo.com wrote: Jonathan, First, I am really sorry about the last name thing. Probably I was working like a mule at the time I created the post. When I load the files directly into QGIS, I get the same white lines and distortions. When zooming in, the lines disappear at certain levels then after zooming in more, I get them back! It is like they are coming and going. The thing is, the lines happen exactly at the borders of each of the 21 merged Images! Any ideas? Regards, Ammar -- *From:* Jonathan Moules jonathanmou...@warwickshire.gov.uk *To:* Ammar ammar8...@yahoo.com *Cc:* geoserver-users@lists.sourceforge.net geoserver-users@lists.sourceforge.net *Sent:* Monday, January 13, 2014 4:44 PM *Subject:* Re: [Geoserver-users] White lines in merged GeoTIFF files after ImageMosaicing Hi Ammar, The commands that I used are: (recommended by Jonathan Mule)http://osgeo-org.1560.x6.nabble.com/Tips-on-serving-Orthophotos-as-ImageMosaic-tt5093083.html#a5093104 That's an original spelling of my last name. ;-) Do the images mosaic together neatly in something like QGIS when loaded as separate files? There may be whitespace as Alessio says. Does the whitespace appear/disappear as you zoom in/out? Cheers, Jonathan On 12 January 2014 18:31, Ammar ammar8...@yahoo.com wrote: Dear list, I have merged 21 GeoTIFF images using GDAL utilities. Each image is the result of merging 500 smaller tiles. I am using ImageMosaic in Geoserver but I am getting a mosaic that contains white lines What could be the reason behind having those white lines? The commands that I used are: (recommended by Jonathan Mule) http://osgeo-org.1560.x6.nabble.com/Tips-on-serving-Orthophotos-as-ImageMosaic-tt5093083.html#a5093104 gdalbuildvrt -srcnodata 255 -vrtnodata 255 -a_srs EPSG:27700 -input_file_list tiff_list.txt mosaic.vrt gdal_translate -of GTiff -co TILED=YES -co BIGTIFF=YES -co COMPRESS=JPEG -co JPEG_QUALITY=80 -co BLOCKXSIZE=512 -co BLOCKYSIZE=512 -co PHOTOMETRIC=YCBCR
Re: [Geoserver-users] White lines in merged GeoTIFF files after ImageMosaicing
Hi Ammar, have you checked that the original geotiff tiles have a white border or a nodata border? == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Sun, Jan 12, 2014 at 7:31 PM, Ammar ammar8...@yahoo.com wrote: Dear list, I have merged 21 GeoTIFF images using GDAL utilities. Each image is the result of merging 500 smaller tiles. I am using ImageMosaic in Geoserver but I am getting a mosaic that contains white lines What could be the reason behind having those white lines? The commands that I used are: (recommended by Jonathan Mule) http://osgeo-org.1560.x6.nabble.com/Tips-on-serving-Orthophotos-as-ImageMosaic-tt5093083.html#a5093104 gdalbuildvrt -srcnodata 255 -vrtnodata 255 -a_srs EPSG:27700 -input_file_list tiff_list.txt mosaic.vrt gdal_translate -of GTiff -co TILED=YES -co BIGTIFF=YES -co COMPRESS=JPEG -co JPEG_QUALITY=80 -co BLOCKXSIZE=512 -co BLOCKYSIZE=512 -co PHOTOMETRIC=YCBCR mosaic.vrt mosaic.tif gdaladdo mosaic.tif -r average --config COMPRESS_OVERVIEW JPEG --config JPEG_QUALITY_OVERVIEW 60 --config INTERLEAVE_OVERVIEW PIXEL --config PHOTOMETRIC_OVERVIEW YCBCR 2 4 8 16 32 64 128 256 512 Thank you in advance //Ammar ___ gdal-dev mailing list gdal-...@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/gdal-dev -- CenturyLink Cloud: The Leader in Enterprise Cloud Services. Learn Why More Businesses Are Choosing CenturyLink Cloud For Critical Workloads, Development Environments Everything In Between. Get a Quote or Start a Free Trial Today. http://pubads.g.doubleclick.net/gampad/clk?id=119420431iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- CenturyLink Cloud: The Leader in Enterprise Cloud Services. Learn Why More Businesses Are Choosing CenturyLink Cloud For Critical Workloads, Development Environments Everything In Between. Get a Quote or Start a Free Trial Today. http://pubads.g.doubleclick.net/gampad/clk?id=119420431iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Creating SLD from feature area information
The SLD your are using requires SE 1.1. The common 1.0 approach is to write a rules for each value. In any case I dubt that you have CNTRY_NAMEs called 1,2,3,4 ... maybe would be better to change numbers with the country names. == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Thu, Dec 5, 2013 at 10:44 PM, Danilo da Silveira Figueira danilomal...@hotmail.com wrote: Hi all, I am stuck here, some help would be very appreciated. I am trying to create a layer style ( sld ) based in area of each geometry feature in a shapefile. It is possible? If it is not, can i use the feature id to create a style? For while i got the below code, that try to interpolate the area values as color gradients, but it isnt working. ( Looks like the area value is not being evaluated ). ?xml version=1.0 encoding=UTF-8?sld:StyledLayerDescriptor xmlns= http://www.opengis.net/sld; xmlns:sld=http://www.opengis.net/sld; xmlns:ogc=http://www.opengis.net/ogc; xmlns:gml= http://www.opengis.net/gml; version=1.0.0 sld:NamedLayer sld:NameCOLOR_MAP NAME/sld:Name sld:UserStyle sld:NameCOLOR_MAP NAME/sld:Name sld:TitleCOLOR_MAP/sld:Title sld:FeatureTypeStyle sld:Namename/sld:Name sld:Rule sld:PolygonSymbolizer sld:Fill sld:CssParameter name=fill ogc:Function name=Interpolate ogc:Function name=area ogc:PropertyNameCNTRY_NAME/ogc:PropertyName /ogc:Function ogc:Literal1/ogc:Literal ogc:Literal#FF/ogc:Literal ogc:Literal2/ogc:Literal ogc:Literal#005FFF/ogc:Literal ogc:Literal3/ogc:Literal ogc:Literal#00BFFF/ogc:Literal ogc:Literal4/ogc:Literal ogc:Literal#20FFDF/ogc:Literal ogc:Literal5/ogc:Literal ogc:Literal#80FF7F/ogc:Literal ogc:Literal6/ogc:Literal ogc:Literal#E0FF1F/ogc:Literal ogc:Literal7/ogc:Literal ogc:Literal#FFBE00/ogc:Literal ogc:Literal8/ogc:Literal ogc:Literal#FF0100/ogc:Literal ogc:Literalcolor/ogc:Literal /ogc:Function /sld:CssParameter /sld:Fill sld:Stroke sld:CssParameter name=stroke#FF/sld:CssParameter /sld:Stroke /sld:PolygonSymbolizer /sld:Rule /sld:FeatureTypeStyle /sld:UserStyle /sld:NamedLayer /sld:StyledLayerDescriptor Thanks! -- Sponsored by Intel(R) XDK Develop, test and display web and hybrid apps with a single code base. Download it for free now! http://pubads.g.doubleclick.net/gampad/clk?id=111408631iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- Sponsored by Intel(R) XDK Develop, test and display web and hybrid apps with a single code base. Download it for free now! http://pubads.g.doubleclick.net/gampad/clk?id=111408631iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Publish a shp file layer with name different from filename
Hello, I guess the only way is to send the REST POST with the full list of properties you need to customize for your layer. If this still doesn't work, you need to make two REST steps, POST for the insert and PUT for the update. == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Thu, Dec 5, 2013 at 2:58 PM, pankaj123 pankaj.bansal.j...@gmail.comwrote: Anyone having any idea please. Regards Pankaj Bansal -- View this message in context: http://osgeo-org.1560.x6.nabble.com/Publish-a-shp-file-layer-with-name-different-from-filename-tp5092501p5092934.html Sent from the GeoServer - User mailing list archive at Nabble.com. -- Sponsored by Intel(R) XDK Develop, test and display web and hybrid apps with a single code base. Download it for free now! http://pubads.g.doubleclick.net/gampad/clk?id=111408631iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- Sponsored by Intel(R) XDK Develop, test and display web and hybrid apps with a single code base. Download it for free now! http://pubads.g.doubleclick.net/gampad/clk?id=111408631iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Use of Geoserver raster processes within OpenLayers: WCS/WPS problem
Cool. Thanks for your feedbacks. == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Wed, Dec 4, 2013 at 8:40 AM, constan.amurrio constan.amur...@gmail.comwrote: SOLVED! The problem was not in my Javascript code. It was in the interpretation of the OpenLayers library file itself. The WPSExecute stablishes the default namespaces. In the case of WCS, in my library version (2.13), the namespace is wcs:http://www.opengis.net/wcs;, which should be changed to wcs:http://www.opengis.net/wcs/1.1.1; in order to make it work. Once you do that change, the process is executed. Thank you Alessio again for your ideas. -- View this message in context: http://osgeo-org.1560.x6.nabble.com/Use-of-Geoserver-raster-processes-within-OpenLayers-WCS-WPS-problem-tp5092361p5092566.html Sent from the GeoServer - User mailing list archive at Nabble.com. -- Sponsored by Intel(R) XDK Develop, test and display web and hybrid apps with a single code base. Download it for free now! http://pubads.g.doubleclick.net/gampad/clk?id=111408631iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- Sponsored by Intel(R) XDK Develop, test and display web and hybrid apps with a single code base. Download it for free now! http://pubads.g.doubleclick.net/gampad/clk?id=111408631iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] change tile mode dynamically via OpenLayers
On my opinion the best way (and maybe the unique too) to do this is to remove the layer and create it again with the new options when switching from tiled to untiled. == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Tue, Dec 3, 2013 at 10:31 AM, pascal pascal2...@gmail.com wrote: Hi, I'm trying to change tile mode of a layer dynamically via OpenLayers using this script: if (this.zoomMapOk4) {this.namesLayer.tiled = true; this.namesLayer.tilesorigin = [this.map.maxExtent.left, this.map.maxExtent.bottom]; this.namesLayer.opacity = 0.6;} else {this.namesLayer.singleTile = true; this.namesLayer.opacity = 1;} The change/opacity is OK because when zoom level is =4 or 4 the opacity of the layer change accordingly, so the problem not come from the OpenLayer script. But there is a problem with the tilesorigin and singleTile property : everything is OK when the zoom is 4 but when the zoom level is =4, the layer disappears. What's wrong? Note: I want to change the tile mode f(zoom level) because if I use the singleTile property, the labels disappear when I'm between Russia and EU (I'm using the wrappDateLine property) but if I use the tilesorigin property, the labels repeat themselves (less that If I don't use it!) and it's quite ugly with a hight zoom level. Pascal. -- View this message in context: http://osgeo-org.1560.x6.nabble.com/change-tile-mode-dynamically-via-OpenLayers-tp5092326.html Sent from the GeoServer - User mailing list archive at Nabble.com. -- Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349351iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349351iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Replace shp file on the fly
With replace you mean update the shapefiles or delete the datastore and create a new one? == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Tue, Dec 3, 2013 at 1:45 AM, Jerry O'Sullivan jeremiahosulli...@gmail.com wrote: Hi I need to replace a shp file datastore on a windows server (running tomcat) every x hours. I have direct access to the filesystem What is the best/safest way to do this - Bat script copy/paste - REST services - Thanks, Jerry -- Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349351iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349351iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Delete Layer Using cURL
Is it possible to have a stacktrace from the GeoServer log? Also before trying again, rise up the logging level to DEBUG. Also, currently there is an open issue with REST delete command http://jira.codehaus.org/browse/GEOS-6199 , I don't think this is the case, but maybe the two problems are related. Please, try again and attach the stack trace to this thread so we can have a look at the origin of the exception. Thanks, Alessio. == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Mon, Dec 2, 2013 at 7:52 PM, pankaj123 pankaj.bansal.j...@gmail.comwrote: hii I tried this and I am able to delete the layer using the first command. curl -u admin:password -v -XDELETE http://IP:PORT/geoserver/rest/layers/LayerName but when I try to delete the layer and datastore using the following two commands I am getting the exception *The remote server returned an error: (403) Forbidden.* curl -u admin:password -v -XDELETE http:// IP:PORT/geoserver/rest/workspaces/workspace/coveragestores/LayerName/coverages/LayerName curl -u admin:password -v -XDELETE http:// IP:PORT/geoserver/rest/workspaces/workspace/coveragestores/LayerName I can delete the layer using first command but how to delete the datastore. Any help.. Regards Pankaj -- View this message in context: http://osgeo-org.1560.x6.nabble.com/Delete-Layer-Using-cURL-tp3795992p5092243.html Sent from the GeoServer - User mailing list archive at Nabble.com. -- Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349351iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349351iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] GeoServer WMS post request with custom body?
It's quite strange. Which version of OpenLayers are you using? I suspect an old one. == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Mon, Dec 2, 2013 at 7:20 PM, Jonathan Moules jonathanmou...@warwickshire.gov.uk wrote: Hi, You'd probably be better served asking this on the OpenLayers list as it sounds like a JavaScript issue. Jonathan On 2 December 2013 08:18, sasuko happog...@gmail.com wrote: Hello, I have an problem with GeoServer and Openlayers. I'm making a POST request to GeoServer to query WMS layer (Openlayers WMS). The problem is that Openlayers is creating a iFrame-element with transparent background and it's not working with IE. Is there a way to configure 'getMap' response body? I'd need to insert a style definition to the body-element background: transparent so I could make the iFrame working with IE. ( http://stackoverflow.com/questions/5133998/iframe-background-transparent-in-ie ) Thanks alot! -- View this message in context: http://osgeo-org.1560.x6.nabble.com/GeoServer-WMS-post-request-with-custom-body-tp5092103.html Sent from the GeoServer - User mailing list archive at Nabble.com. -- Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349351iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users This transmission is intended for the named addressee(s) only and may contain sensitive or protectively marked material up to RESTRICTED and should be handled accordingly. Unless you are the named addressee (or authorised to receive it for the addressee) you may not copy or use it, or disclose it to anyone else. If you have received this transmission in error please notify the sender immediately. All email traffic sent to or from us, including without limitation all GCSX traffic, may be subject to recording and/or monitoring in accordance with relevant legislation. -- Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349351iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349351iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Open Layers problem in Layer Preview
You are making a wrong request to GeoServer, maybe the style is wrong or some other parameter. Try to catch the url of the request from the client and see if all the parameters are correct. Also take a look at the GeoServer log, most probably you will notice an exception somewhere. == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Tue, Dec 3, 2013 at 11:34 AM, Ammar ammar8...@yahoo.com wrote: Hello List, I am trying to view a Layer Group using Open Layers but instead of opening the map in a new web page, I am getting a window that prompts me to either open/save as the WMS! (see attached screen shot). I have just deleted one layer from the group and changed the layers' order and started getting this problem. The Layer Group used to work normally and viewed in Open Layers before deleting/arranging the layers. Also, I have tested opening each layer separately in Open Layers and they work fine. Any ideas suggestion will be appreciated. //Ammar -- Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349351iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349351iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Use of Geoserver raster processes within OpenLayers: WCS/WPS problem
Just a guess, try to use http://localhost:8080/geoserver/*wps*/; instead of http://localhost:8080/geoserver/ows/;. == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Tue, Dec 3, 2013 at 12:23 PM, constan.amurrio constan.amur...@gmail.comwrote: Hello to everyone! I've been working with some GeoServer processes using OpenLayers as client. I've been successful in those which use WFS as input (like gs:BufferFeatureCollection). My problem comes when I want to use processes that need as input raster data (tiff). I know that OpenLayers is not a WCS client, but you can send a POST request to the server to get back the result, right?. Particularly I want to execute the gs:RasterZontalStatistics, that needs a tiff and a WFS layer as input, and returns some statistics (average, min, max, etc.) for the tiff inside the geometries of the WFS Layer. This is the code I've used so far: ///*GEOPROCESS - Calculate the average/min/max values of the MDE raster according to user drawing selection*/ function obtainElevationProcess(){ var wpsFormat= new OpenLayers.Format.WPSExecute(); var doc= wpsFormat.write({ identifier: gs:RasterZonalStatistics, dataInputs:[{ identifier:'data', reference:{ mimeType:image/tiff, href: http://geoserver/wcs;, method: POST, body: { wcs: { identifier:'forestry:mde200_V4', version:1.1.1, domainSubset: { boundingBox: { projection: 'http://www.opengis.net/gml/srs/epsg.xml#3857', bounds: new OpenLayers.Bounds(-200931.8344047, 4681799.186142525,32948.35238090271, 4948113.428142309) } }, output: {format:'image/tiff'}, } } } }, { identifier:zones, reference:{ mimeType:text/xml; subtype=wfs-collection/1.0, href: http://geoserver/wfs;, method: 'POST', body:{ wfs:{ version:'1.0.0', outputFormat: GML2, featureNS: http://localhost:8080/thesis/forestry;, featureType:'forestry:Lics', } } } }], responseForm:{ rawDataOutput:{ mimeType:text/xml;subtype=wfs-collection/1.0, identifier:statistics } } }); OpenLayers.Request.POST({ url:http://localhost:8080/geoserver/ows/;, data:doc, headers: { Content-Type: text/xml;charset=utf-8 }, success: function(response){ alert(response.responseText); } }); }/ Once executed, OpenLayers returns this message (selection): /Process execution ecacba6c-a676-46b5-9010-bd4a2bb35632 failed Failed to retrieve value for input data Unrecognized request type {service=WCS, Output=image/tiff, Identifier=net.opengis.ows11.impl.CodeTypeImpl@1ad2fc (value: forestry:mde200_V4, codeSpace: null), DomainSubset=net.opengis.ows11.impl.BoundingBoxTypeImpl@111d0b5 (lowerCorner: [-200931.8344047, 4681799.1861425], upperCorner: [32948.352380903, 4948113.4281423], crs: http://www.opengis.net/gml/srs/epsg.xml#3857, dimensions: null), version=1.1.1}/ows:ExceptionText/ows:Exception/ows:ExceptionReport/wps:ProcessFailed/wps:Status/wps:ExecuteResponse/ Does anyone an idea about how this can be done (if possible)? My environment is: Geoserver 2.3.5 / OpenLayers 2.13 / localhost on Apache. Help will be highly appreciated. Thanks. Constan. -- View this message in context: http://osgeo-org.1560.x6.nabble.com/Use-of-Geoserver-raster-processes-within-OpenLayers-WCS-WPS-problem-tp5092361.html Sent from the GeoServer - User mailing list archive at Nabble.com. -- Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how
Re: [Geoserver-users] Use of Geoserver raster processes within OpenLayers: WCS/WPS problem
Taking a better look at the error message however, the issue seems related to the input data. It looks like the WPS is not able to encode a correct request to the WCS in order to retrieve the raster. Have you tried to copy the XML generated by OpenLayers and send it to the WPS directly using a tool like CURL or Poster? == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Tue, Dec 3, 2013 at 12:50 PM, constan.amurrio constan.amur...@gmail.comwrote: Thank you very much Alessio. Unfortunately, it doesn't work. It's quite strange. With WFS it works perfectly, but something is wrong with WCS. I've checked the resulting POST xml file in FireBug when I call the process and it's exactly the same the one Geoserver generates in the WPS Request Builder. -- View this message in context: http://osgeo-org.1560.x6.nabble.com/Use-of-Geoserver-raster-processes-within-OpenLayers-WCS-WPS-problem-tp5092361p5092369.html Sent from the GeoServer - User mailing list archive at Nabble.com. -- Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349351iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349351iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] help me!!! geoserver2.4.2 can't transaction insert
Hello, it is not easy to understand the issue, since the log you sumbitted does not seem to report any error or something wrong. Did you double checked that the WFS service is enabled in full transactional mode? Can you also try to rise the log level to DEBUG / VERBOSE and try again in order to see if some sort of exception is raised up? == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Fri, Nov 29, 2013 at 3:49 AM, fanxing926 fanxing...@163.com wrote: help me!!! I met a question: I setup geoserver and find from geoserver 2.1.2 to geoserver2.4.2, geoserver demo-page wfs-transactioninsert.xml can't be operated, it's state is loading.. the geoserver.log info is: 2013-11-29 09:28:21,619 DEBUG [org.geoserver.ows.OWSHandlerMapping] - No handler mapping found for [/web/] 2013-11-29 09:28:21,624 DEBUG [org.geoserver.ows.OWSHandlerMapping] - No handler mapping found for [/web/] 2013-11-29 09:28:21,629 DEBUG [org.geoserver.ows.OWSHandlerMapping] - No handler mapping found for [/web/] 2013-11-29 09:28:21,633 DEBUG [org.geoserver] - Thread 10 locking in mode READ 2013-11-29 09:28:21,636 DEBUG [org.geoserver] - Thread 10 got the lock in mode READ 2013-11-29 09:28:21,648 DEBUG [org.geoserver] - Thread 10 releasing the lock in mode READ 2013-11-29 09:28:21,650 DEBUG [org.geoserver.filters] - Compressing output for mimetype: text/xml; charset=utf-8 2013-11-29 09:28:21,661 DEBUG [org.geoserver.ows.OWSHandlerMapping] - No handler mapping found for [/web/] 2013-11-29 09:28:21,662 DEBUG [org.geoserver.ows.OWSHandlerMapping] - No handler mapping found for [/web/] 2013-11-29 09:28:21,664 DEBUG [org.geoserver.ows.OWSHandlerMapping] - No handler mapping found for [/web/] 2013-11-29 09:28:21,666 DEBUG [org.geoserver] - Thread 10 locking in mode READ 2013-11-29 09:28:21,667 DEBUG [org.geoserver] - Thread 10 got the lock in mode READ 2013-11-29 09:28:21,674 DEBUG [org.geoserver.web] - cannot convert url: jar:file:/C:/Program%20Files%20(x86)/GeoServer%202.2/webapps/geoserver/WEB-INF/lib/web-core-2.2.jar!/org/geoserver/web/css/blueprint/screen.css to file (URI is not hierarchical), falling back to the inputstream for polling 2013-11-29 09:28:21,678 DEBUG [org.geoserver.web] - cannot convert url: jar:file:/C:/Program%20Files%20(x86)/GeoServer%202.2/webapps/geoserver/WEB-INF/lib/web-core-2.2.jar!/org/geoserver/web/css/blueprint/print.css to file (URI is not hierarchical), falling back to the inputstream for polling 2013-11-29 09:28:21,682 DEBUG [org.geoserver.web] - cannot convert url: jar:file:/C:/Program%20Files%20(x86)/GeoServer%202.2/webapps/geoserver/WEB-INF/lib/web-core-2.2.jar!/org/geoserver/web/css/geoserver.css to file (URI is not hierarchical), falling back to the inputstream for polling 2013-11-29 09:28:21,686 DEBUG [org.geoserver.web] - cannot convert url: jar:file:/C:/Program%20Files%20(x86)/GeoServer%202.2/webapps/geoserver/WEB-INF/lib/web-core-2.2.jar!/org/geoserver/web/css/blueprint/ie.css to file (URI is not hierarchical), falling back to the inputstream for polling 2013-11-29 09:28:21,690 DEBUG [org.geoserver.web] - cannot convert url: jar:file:/C:/Program%20Files%20(x86)/GeoServer%202.2/webapps/geoserver/WEB-INF/lib/web-core-2.2.jar!/org/geoserver/web/css/geoserver-ie.css to file (URI is not hierarchical), falling back to the inputstream for polling 2013-11-29 09:28:21,694 DEBUG [org.geoserver.web] - cannot convert url: jar:file:/C:/Program%20Files%20(x86)/GeoServer%202.2/webapps/geoserver/WEB-INF/lib/web-core-2.2.jar!/org/geoserver/web/js/jquery-1.2.6.min.js to file (URI is not hierarchical), falling back to the inputstream for polling 2013-11-29 09:28:21,703 DEBUG [org.geoserver.web] - cannot convert url: jar:file:/C:/Program%20Files%20(x86)/GeoServer%202.2/webapps/geoserver/WEB-INF/lib/web-core-2.2.jar!/org/geoserver/web/js/jquery.inline-info.js to file (URI is not hierarchical), falling back to the inputstream for polling 2013-11-29 09:28:21,726 DEBUG [org.geoserver] - Thread 10 releasing the lock in mode READ 2013-11-29 09:28:21,729 DEBUG [org.geoserver.filters] - Compressing output for mimetype: text/html; charset=utf-8 2013-11-29 09:28:32,384 DEBUG [org.geoserver.ows.OWSHandlerMapping] - No handler mapping found for [/web/] 2013-11-29 09:28:32,386 DEBUG [org.geoserver.ows.OWSHandlerMapping] - No handler mapping found for [/web/] 2013-11-29 09:28:32,389 DEBUG [org.geoserver.ows.OWSHandlerMapping] - No handler mapping found for [/web/] 2013-11-29 09:28:32,392 DEBUG [org.geoserver] - Thread 10 locking in mode READ 2013-11-29 09:28:32,393 DEBUG [org.geoserver] - Thread
Re: [Geoserver-users] GEOSERVER_DATA_DIR upgrade - REST not enabled
Hello Chris, nothing that I can recall right now. Can you send me the rest.properties files just to be sure that everything is ok? I would also point out that in the latest GeoServer versions only the Administrators can access the internal resources due to a different security subsystem. == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Mon, Nov 18, 2013 at 10:24 AM, Chris Morgan ch...@lynxinfo.co.uk wrote: Hi Alessio, Sorry, I didn't see your reply earlier. I have the rest.properties file in my upgraded geoserver_data_dir, and it is identical to the one that is automatically created in a new 2.4 geoserver_data_dir. Are there any other config files I may be missing? Thanks, Chris On 13/11/2013 13:08, Alessio Fabiani wrote: I guess you need to update the rest.properties file inside the GEOSERVER_DATA_DIR. This file controls the Rest access constraints. http://docs.geoserver.org/latest/en/user/security/rest.html == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Wed, Nov 13, 2013 at 1:45 PM, Chris Morgan ch...@lynxinfo.co.ukwrote: Hi list, I have a GEOSERVER_DATA_DIR that I have upgraded from V2.0 to V2.4.0. Any attempt to access http://localhost:8080/geoserver/rest gives a 404 error. If I remove my data dir and use the default in the WAR file, then http://localhost:8080/geoserver/rest works OK. This leads me to the assumption that the upgrade process is not enabling REST correctly. What do I need to modify in my upgraded data dir to enable REST? Thanks, Chris -- Chris Morgan Director of Information Technology Lynx Information Systems Ltd Tel: +44 (0)20 8780 2634 Email: ch...@lynxinfo.co.uk Web: http://www.lynxinfo.co.uk Lynx Information Systems Ltd 93-99 Upper Richmond Rd London SW15 2TG United Kingdom Web: http://www.lynxinfo.co.uk Email: l...@lynxinfo.co.uk Tel: +44 (0)20 8780 2634 Fax: +44 (0)20 8780 0931 Registered in England Number 2454130 VAT Number GB 561 8979 88 Incoming and outgoing emails are checked for viruses by Sophos AntiVirus. This email may contain confidential information which is intended for the named recipient(s) only. If you are not the named recipient you should not take any action in relation to this email, other than to notify us that you have received it in error. -- DreamFactory - Open Source REST JSON Services for HTML5 Native Apps OAuth, Users, Roles, SQL, NoSQL, BLOB Storage and External API Access Free app hosting. Or install the open source package on any LAMP server. Sign up and see examples for AngularJS, jQuery, Sencha Touch and Native! http://pubads.g.doubleclick.net/gampad/clk?id=63469471iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users Lynx Information Systems Ltd 93-99 Upper Richmond Rd London SW15 2TG United Kingdom Web: http://www.lynxinfo.co.uk Email: l...@lynxinfo.co.uk Tel: +44 (0)20 8780 2634 Fax: +44 (0)20 8780 0931 Registered in England Number 2454130 VAT Number GB 561 8979 88 Incoming and outgoing emails are checked for viruses by Sophos AntiVirus. This email may contain confidential information which is intended for the named recipient(s) only. If you are not the named recipient you should not take any action in relation to this email, other than to notify us that you have received it in error. -- DreamFactory - Open Source REST JSON Services for HTML5 Native Apps OAuth, Users, Roles, SQL, NoSQL, BLOB Storage and External API Access Free app hosting. Or install the open source package on any LAMP server. Sign up and see examples
Re: [Geoserver-users] Fwd: WPS Implementation using GeoServer
Hi Anunay, I'm not going to give a complete response since I don't have too much experience with other WPS implementations you mentioned in the email. What I can say is that GeoServer WPS uses GeoTools WPS processes, providing the OGC and GUI interface to them. They are written in Java as classes, and can both be used as stand-alone components for programmatic processing as GeoTools classes or exposed as web services by GeoServer. One advantage when using the GeoServer WPS is that you can access the GeoServer resources directly interacting directly with the GeoServer catalog. Such way the performances are very high since you don't have to get the resources through the HTTP protocol or other Web Service. Finally GeoServer provides some APIs and templates that allow you to extend/plug-in your processes very quickly. == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Mon, Nov 18, 2013 at 3:55 PM, Anunay Sinha anunay.sinh...@gmail.comwrote: -- Forwarded message -- From: Anunay Sinha anunay.sinh...@gmail.com Date: Mon, Nov 18, 2013 at 8:21 PM Subject: WPS Implementation using GeoServer To: geoserver-users@lists.sourceforge.net We have a requirement where in we need to expose our analysis to a web based GIS system. We decided to do it using WPS. I used WPS extension to write a test code and it does fine. However I have general question about WPS (This may not be the best platform but still.) What is a difference between different WPS Frameworks out there 1. GeoServer 2. GeoTools 3. Deegree 4 52North 5 ZooWPS I am not sure which one to choose and what are things I need to consider when making this choice. Also if you can let me know where GeoServer WPS stands when compared with the rest (My thinking here is since they all provide OGC WPS Implementation they all should be doing pretty much the same thing, but that is a wild thought) Looking for your help Anunay -- DreamFactory - Open Source REST JSON Services for HTML5 Native Apps OAuth, Users, Roles, SQL, NoSQL, BLOB Storage and External API Access Free app hosting. Or install the open source package on any LAMP server. Sign up and see examples for AngularJS, jQuery, Sencha Touch and Native! http://pubads.g.doubleclick.net/gampad/clk?id=63469471iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- DreamFactory - Open Source REST JSON Services for HTML5 Native Apps OAuth, Users, Roles, SQL, NoSQL, BLOB Storage and External API Access Free app hosting. Or install the open source package on any LAMP server. Sign up and see examples for AngularJS, jQuery, Sencha Touch and Native! http://pubads.g.doubleclick.net/gampad/clk?id=63469471iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] GEOSERVER_DATA_DIR upgrade - REST not enabled
I guess you need to update the rest.properties file inside the GEOSERVER_DATA_DIR. This file controls the Rest access constraints. http://docs.geoserver.org/latest/en/user/security/rest.html == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Wed, Nov 13, 2013 at 1:45 PM, Chris Morgan ch...@lynxinfo.co.uk wrote: Hi list, I have a GEOSERVER_DATA_DIR that I have upgraded from V2.0 to V2.4.0. Any attempt to access http://localhost:8080/geoserver/rest gives a 404 error. If I remove my data dir and use the default in the WAR file, then http://localhost:8080/geoserver/rest works OK. This leads me to the assumption that the upgrade process is not enabling REST correctly. What do I need to modify in my upgraded data dir to enable REST? Thanks, Chris -- Chris Morgan Director of Information Technology Lynx Information Systems Ltd Tel: +44 (0)20 8780 2634 Email: ch...@lynxinfo.co.uk Web: http://www.lynxinfo.co.uk Lynx Information Systems Ltd 93-99 Upper Richmond Rd London SW15 2TG United Kingdom Web: http://www.lynxinfo.co.uk Email: l...@lynxinfo.co.uk Tel: +44 (0)20 8780 2634 Fax: +44 (0)20 8780 0931 Registered in England Number 2454130 VAT Number GB 561 8979 88 Incoming and outgoing emails are checked for viruses by Sophos AntiVirus. This email may contain confidential information which is intended for the named recipient(s) only. If you are not the named recipient you should not take any action in relation to this email, other than to notify us that you have received it in error. -- DreamFactory - Open Source REST JSON Services for HTML5 Native Apps OAuth, Users, Roles, SQL, NoSQL, BLOB Storage and External API Access Free app hosting. Or install the open source package on any LAMP server. Sign up and see examples for AngularJS, jQuery, Sencha Touch and Native! http://pubads.g.doubleclick.net/gampad/clk?id=63469471iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- DreamFactory - Open Source REST JSON Services for HTML5 Native Apps OAuth, Users, Roles, SQL, NoSQL, BLOB Storage and External API Access Free app hosting. Or install the open source package on any LAMP server. Sign up and see examples for AngularJS, jQuery, Sencha Touch and Native! http://pubads.g.doubleclick.net/gampad/clk?id=63469471iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] GeoWebCache TMS TileCache for GeoTiff in EPSG:3857
Hello Billy, are you using the integrated GWC on an external one? Moreover how you have defined the gridset? Did you also enabled the layers to be served against the new gridset? In order to do a quick test, in the case you are using the integrated GWC version, just get the preview URL on 3857 and modify the address with geoserver/gwc/service/wms something like http://../geoserver/gwc/service/wms?LAYERS=osmSRS=EPSG%3A3857TILED=true... == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Wed, Oct 30, 2013 at 1:46 AM, Billy Newman newman...@gmail.com wrote: I have created a data store for a GeoTIFF that is in EPSG:3857 projection. I then publish a layer. All looks good in the open layers preview, asks for EPSG:3857 and the image looks correct. However I am trying to create a TileCache in that same projection, EPSG:3857. I created a new Gridset for that projection. But when I go to the GWC url to create the TileCache I see this as the bounding box: EPSG:3857: 0.0,0.0,-1.0,-1.0 When I try and calculate the TileCache nothing of course happens as my image is not over that area. The EPSG:4326 coords are correct. Ideas? Thanks. -- Android is increasing in popularity, but the open development platform that developers love is also attractive to malware creators. Download this white paper to learn more about secure code signing practices that can help keep Android apps secure. http://pubads.g.doubleclick.net/gampad/clk?id=65839951iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- Android is increasing in popularity, but the open development platform that developers love is also attractive to malware creators. Download this white paper to learn more about secure code signing practices that can help keep Android apps secure. http://pubads.g.doubleclick.net/gampad/clk?id=65839951iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] How to get access to REST for created user?
As far as I remember with the latest versions of GeoServer only admin users can access the layers, featureTypes and stores via REST == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Fri, Oct 18, 2013 at 7:57 AM, Макс Кливер dh0m...@gmail.com wrote: Hi. I have Geoserver 2.3.5. I was created *topp_group* add *topp_user* and created *topp_role*. So my *topp_group* and *topp_user* have a *topp_role*. After i create rule: *topp.*.a=topp_role*. Now i login how *topp_user* and see only topp workspace. Now i want to get layers from topp workspace using rest. In file * rest.properties* i have: */rest/workspaces/topp*;GET=topp_role /rest/workspaces/topp*;POST,DELETE,PUT=topp_role* But when i go to *http://localhost:8080/geoserver/rest/workspaces/topp/*i get: * 404 RequestURI=/geoserver/accessDenied.jsp* What i do wrong? -- October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register http://pubads.g.doubleclick.net/gampad/clk?id=60135031iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register http://pubads.g.doubleclick.net/gampad/clk?id=60135031iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] gs:Contour error
As far as I remember there should be an issue in that GeoServer version with the Contour rendering transformation which is fixed on 2.4.x version. I'm not completely sure, have to verify, but in the meantime you may want to test the latest GeoServer version to see if it's working fine. -A. == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Tue, Oct 8, 2013 at 4:02 PM, Holb Endre holb.en...@axis.hu wrote: Hy! ** ** I’m trying to apply gs:Contour WPS process with the WPS request builder. My Geoserver version 2.3.1. I’ve downloaded the approriate WPS extension. I use the original sf:sfdem raster file. This raster file is ok with the original *dem* sld style. But when I execute the process the result is an error : ** ** filled input parameters: data, interval ** ** Process failed during execution java.lang.IllegalArgumentException: The input argument(s) may not be null. ** ** Can you help me? ** ** Thenks Endre Holb a developer ** ** -- October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register http://pubads.g.doubleclick.net/gampad/clk?id=60134071iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register http://pubads.g.doubleclick.net/gampad/clk?id=60134071iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] WMS GetCapabilities CRS error
Is it possible that your EPSG DB is corrupted somehow or ruined? Do you get the same issue restarting GeoServer too? And also trying to cleanup the Tomcat temp folder? == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Thu, Oct 3, 2013 at 2:13 PM, Gabriel Vatin gabriel.va...@mines-paristech.fr wrote: Hmm.. doesn't change much, I don't even have a piece of WMS answer when I add this restricted list. Same error for both WMS 1.1.0 and 1.3.0 ServiceExceptionReport version=1.3.0 xsi:schemaLocation= http://www.opengis.net/ogc http://geo.crc.mines-paristech.fr:8080/geoserver/schemas/wms/1.3.0/exceptions_1_3_0.xsd ServiceException javax.xml.transform.TransformerException: java.lang.ArrayIndexOutOfBoundsException: 0 java.lang.ArrayIndexOutOfBoundsException: 0 0 Details: org.geoserver.platform.ServiceException: javax.xml.transform.TransformerException: java.lang.ArrayIndexOutOfBoundsException: 0 at org.geoserver.wms.capabilities.Capabilities_1_3_0_Response.write(Capabilities_1_3_0_Response.java:66) at org.geoserver.ows.Dispatcher.response(Dispatcher.java:919) at org.geoserver.ows.Dispatcher.handleRequestInternal(Dispatcher.java:276) at org.springframework.web.servlet.mvc.AbstractController.handleRequest(AbstractController.java:153) at org.springframework.web.servlet.mvc.SimpleControllerHandlerAdapter.handle(SimpleControllerHandlerAdapter.java:48) at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:923) at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:852) at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:882) at org.springframework.web.servlet.FrameworkServlet.doGet(FrameworkServlet.java:778) at javax.servlet.http.HttpServlet.service(HttpServlet.java:621) at javax.servlet.http.HttpServlet.service(HttpServlet.java:722) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:305) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210) at org.geoserver.filters.ThreadLocalsCleanupFilter.doFilter(ThreadLocalsCleanupFilter.java:27) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:243) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210) at org.geoserver.filters.SpringDelegatingFilter$Chain.doFilter(SpringDelegatingFilter.java:74) at org.geoserver.filters.SpringDelegatingFilter.doFilter(SpringDelegatingFilter.java:45) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:243) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210) at org.geoserver.platform.AdvancedDispatchFilter.doFilter(AdvancedDispatchFilter.java:49) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:243) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210) at org.vfny.geoserver.filters.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:109) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:243) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210) ... - Mail original - De: Jonathan Moules jonathanmou...@warwickshire.gov.uk À: Gabriel Vatin gabriel.va...@mines-paristech.fr Cc: GeoServer Users geoserver-users@lists.sourceforge.net Envoyé: Jeudi 3 Octobre 2013 14:04:04 Objet: Re: [Geoserver-users] WMS GetCapabilities CRS error Hi, Comma separated list is fine. I have for instance: 27700, 4326 Jonathan On 3 October 2013 13:01, Gabriel Vatin gabriel.va...@mines-paristech.fr wrote: I'll try this solution. What is the format to fill this text field ? Let's say I want to use only 4326, 2154 and 900913, should i put : - 4326, 2154, 900913 - EPSG:4326, EPSG:2154... Or other format ? Le 03/10/2013 12:47, Jonathan Moules a écrit : Hi Gabriel, That looks unhealthy. Might be worth reporting as a bug. A possible workaround - when logged in as admin, if you go to the WMS settings (under services), one of the options is Limited SRS list. It's worth adding only the SRS's that you want to use here. That makes the WMS responses much shorter
Re: [Geoserver-users] upgrade from 2.1 to 2.4 problems
Hi Stephen, from your analysis I don't think the issue depends from GWC. I'm afraid that the datastores/coveragestores are corrupted. In any case, before removing everything you can try something like this: 1. Get a 2.1 clean GS_DATA_DIR 2. Copy on that the workspaces folder of your current GS_DATA_DIR 3. Copy on that the data you eventually put on your GS_DATA_DIR and styles 4. Point the GeoServer to that new dir through an environment variable and see if the catalog is loaded again 5. In order to be sure the stores and layers are correctly loaded, edit the properties and visualize them through the OL Preview. If you get any kind of error then the catalog is still corrupted. Alternatively you can compare a clean GS 2.1 Data DIR with your one and try to remove any additional XML file not matching the original one (except the stores, layers ans styles definitions of course) == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Tue, Oct 1, 2013 at 6:43 PM, Stephen Crawford src...@psu.edu wrote: Hi All, I made the mistake of not backing-up my data directory. That's a lesson learned. So it seems there is no going back to 2.1. This GS instance has a large number of coverages, which are configured as group layers (adding state and country layers on top of coverage) and then served out as tiles via gwc for use in an openlayers-base tool. Since the upgrade(?!?!) some but not all of the group layers are not served, with this error in the logs: ERROR [geowebcache.GeoWebCacheDispatcher] - Thread 44 Unknown layer grp_spr_ms_0_20130701. Check the logfiles, it may not have loaded properly. I can see that there is a file grp_spr_ms_0_20130701.xml in the layergroups directory, and there is an appropriately name directory in the gwc directory. The grp_spr_ms_0_20130701.xml file has an id node idLayerGroupInfoImpl-3650b2e0:13f86d619a0:-70ac/id which I belive should exist as an xml file the gwc-layers directory, but it is not there. So this seems to have been lost in the upgrade. An added problem is that when using the Web Admin GUI both the 'layer preview' and 'layer groups' functions throw an error (null pointer exception) and don't load, so it is difficult to see what is there, what is missing, etc. So one question is can I just empty the gwc and gwc-layers directories and the just reseed from there? Or any other ideas? Thanks, Steve On 9/26/2013 7:29 PM, Damiano Giampaoli wrote: Hi Steve, I never saw that error but what's about the upgrade? Can you describe the steps you did for the upgrade? (Have you cleaned the tomcat temp and work dirs? Are other webapps deployed on that Tomcat instance? Have you used tomcat manager?) Can you paste the startup log? Did you see any errors related to the GS data dir update? Lots of changes have been made to GS data dir structure between GS 2.1 and 2.4. Have you made a backup of your old GS data dir? Can you restart geoserver pointing the old data dir? bye, Damiano 2013/9/26 Stephen Crawford src...@psu.edu And here are the errors in the logs :-) 2013-09-26 13:28:03,392 WARN [geoserver.web] - Unable to find property: 'format.wms.application/vnd.google-earth.kmz xml' for component: [class=org.geoserver.web.demo.MapPreviewPage] 2013-09-26 13:28:03,392 WARN [geoserver.web] - Unable to find property: 'format.wms.application/vnd.google-earth.kmz' for component: [class=org.geoserver.web.demo.MapPreviewPage] 2013-09-26 13:28:03,393 WARN [geoserver.web] - Unable to find property: 'format.wms.kmz' for component: [class=org.geoserver.web.demo.MapPreviewPage] 2013-09-26 13:28:03,393 WARN [geoserver.web] - Unable to find property: 'format.wms.image/png; mode=8bit' for component: [class=org.geoserver.web.demo.MapPreviewPage] 2013-09-26 13:28:03,394 WARN [geoserver.web] - Unable to find property: 'format.wms.openlayers' for component: [class=org.geoserver.web.demo.MapPreviewPage] 2013-09-26 13:28:03,394 WARN [geoserver.web] - Unable to find property: 'format.wms.text/html' for component: [class=org.geoserver.web.demo.MapPreviewPage] 2013-09-26 13:28:03,395 WARN [geoserver.web] - Unable to find property: 'format.wms.atom' for component: [class=org.geoserver.web.demo.MapPreviewPage] 2013-09-26 13:28:03,395 WARN [geoserver.web] - Unable to find property: 'format.wms.application/atom xml' for component: [class=org.geoserver.web.demo.MapPreviewPage] 2013-09-26 13:28:03,395 WARN [geoserver.web] - Unable to find property: 'format.wms.application/xml' for component: [class=org.geoserver.web.demo.MapPreviewPage] 2013-09-26 13:28:03,396 WARN
Re: [Geoserver-users] NetCDF Support
Oh I see, however the same documentation of the link is available as HTML on the docs.zip files of the workshop. == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Wed, Oct 2, 2013 at 4:49 PM, Mike Grogan d.michael.gro...@gmail.comwrote: Thanks for the update. I will try to work with this soon. Unfortunately, the first link is a 404 for me. - Mike Grogan On Mon, Sep 30, 2013 at 5:36 PM, Alessio Fabiani alessio.fabi...@geo-solutions.it wrote: Hello Mike, currently the NetCDF stuff is not yet fully backported to GeoServer 2.4.x, so basically for a while building the NetCDF stuff and using it can be done only through some GeoServer forks around. In any case, if you want to do some tests and start playing with it, here https://github.com/geosolutions-it/educational/blob/master/multidim/en/get_started/geoserver_multidim_basics.rst there are some instructions on how to build locally a GeoServer Multidimensional. Also the same address contains a full opensource workshop demonstrating step-by-step the use of Multidimensional plugins other than import/export of NetCDF files. A ready to use Tomcat with GeoServer Multidim is also available through the Multidim Workshop binaries here: 64 bit - http://geoserver.geo-solutions.it/downloads/training/windows/64/multidim/ 32 bit - http://geoserver.geo-solutions.it/downloads/training/windows/32/multidim/ Hope this helps. -A. == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Mon, Sep 30, 2013 at 8:11 PM, Mike Grogan d.michael.gro...@gmail.comwrote: It seems I have seen a lot about improved/new NetCDF support in GeoServer change logs, release, notes, etc. lately. However, I don't seem to be able to uncover any documentation on how to actually use NetCDF as a data source in GeoServer. Can someone point me in the right direction? Thanks, Mike Grogan -- October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register http://pubads.g.doubleclick.net/gampad/clk?id=60133471iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register http://pubads.g.doubleclick.net/gampad/clk?id=60134791iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] jdbcconfig module
Hi Paulius, I'm not sure to understand exactly what do you mean with impact on TileCaching, what exactly you want to do? GeoWebCache saves the tiles on the mass storage, if you change the layer you have to invalidate the cache in order to regenerate the new tiles. The jdbcconfig module has no effect on this behavior. -A. == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Mon, Sep 30, 2013 at 9:36 AM, Paulius Litvinas paul...@infoera.ltwrote: Hello List, ** ** I tried to configure jdbcconfig extension for GeoServer. It works good – saves settings to PosgreSQL and all 3 clusters can successfully Access it. But I notice one thing – jdbcconfig has no impact for TileCaching ( Tile Layers) – changes on master GeoServer instance for Tile Layers were not sinchronized between instances. ** ** ** ** Does jdbcconfig module supports GeoWebCache settings? Or maybe it is just for GeoServer settings? ** ** I am using geoserver 2.4.war on Windows Server 2008R2 X64 on Tomcat6 + jdk1.6 x64. ** ** Sincerely, Paul -- October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register http://pubads.g.doubleclick.net/gampad/clk?id=60133471iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register http://pubads.g.doubleclick.net/gampad/clk?id=60133471iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] (no subject)
http://geobatch.geo-solutions.it/ == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Wed, Sep 25, 2013 at 2:41 PM, David McKinney dfmrea...@gmail.com wrote: Hello Group! Is there a solution to getting a collection of GeoTiffs into GeoServer without using REST or the Import Data feature (available only in the Suite)? Thanks, DFM -- October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register http://pubads.g.doubleclick.net/gampad/clk?id=60133471iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register http://pubads.g.doubleclick.net/gampad/clk?id=60133471iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] NetCDF Support
Hello Mike, currently the NetCDF stuff is not yet fully backported to GeoServer 2.4.x, so basically for a while building the NetCDF stuff and using it can be done only through some GeoServer forks around. In any case, if you want to do some tests and start playing with it, here https://github.com/geosolutions-it/educational/blob/master/multidim/en/get_started/geoserver_multidim_basics.rst there are some instructions on how to build locally a GeoServer Multidimensional. Also the same address contains a full opensource workshop demonstrating step-by-step the use of Multidimensional plugins other than import/export of NetCDF files. A ready to use Tomcat with GeoServer Multidim is also available through the Multidim Workshop binaries here: 64 bit - http://geoserver.geo-solutions.it/downloads/training/windows/64/multidim/ 32 bit - http://geoserver.geo-solutions.it/downloads/training/windows/32/multidim/ Hope this helps. -A. == Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information. == Ing. Alessio Fabiani @alfa7691 Founder/Technical Lead GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 331 6233686 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- On Mon, Sep 30, 2013 at 8:11 PM, Mike Grogan d.michael.gro...@gmail.comwrote: It seems I have seen a lot about improved/new NetCDF support in GeoServer change logs, release, notes, etc. lately. However, I don't seem to be able to uncover any documentation on how to actually use NetCDF as a data source in GeoServer. Can someone point me in the right direction? Thanks, Mike Grogan -- October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register http://pubads.g.doubleclick.net/gampad/clk?id=60133471iu=/4140/ostg.clktrk ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register http://pubads.g.doubleclick.net/gampad/clk?id=60134791iu=/4140/ostg.clktrk___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Rest Examples
http://code.google.com/p/geoserver-manager/ Regards, Alessio. --- Ing. Alessio Fabiani Founder / CTO GeoSolutions S.A.S. GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: (+39) 0584 96.23.13 fax: (+39) 0584 96.23.13 mobile:(+39) 331 62.33.686 http://www.geo-solutions.it http://geo-solutions.blogspot.com http://www.linkedin.com/in/alessiofabiani https://twitter.com/alfa7961 http://twitter.com/geosolutions_it --- On Thu, Jul 5, 2012 at 5:25 PM, Guntu, Ashok (IS) (Contr) ashok.gu...@ngc.com wrote: Hello ** ** We need to programmatically be able to create layers in geoserver. Based on the documentation, looks like Geoserver offers rest services to do that. There are no examples as to how this works in Java. If anybody can provide some insight into this, that will be great. ** ** Thanks Ashok -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Pyramid: Request is empty
The configuration looks good at a first glance. Maybe there's a problem in the ImageMosaic or Pyramid itself? Have you the chance to rise up the GeoServer logging level to VERBOSE and try to reproduce the issue? Than if you can provide us the StackTrace it may be useful to better spot the issue. Regards, Alessio. --- Ing. Alessio Fabiani Founder / CTO GeoSolutions S.A.S. GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: (+39) 0584 96.23.13 fax: (+39) 0584 96.23.13 mobile:(+39) 331 62.33.686 http://www.geo-solutions.it http://geo-solutions.blogspot.com http://www.linkedin.com/in/alessiofabiani https://twitter.com/alfa7961 http://twitter.com/geosolutions_it --- On Tue, May 22, 2012 at 1:00 PM, Casper Børgesen (CABO) c...@niras.dkwrote: If I look at the shape files, all 5 levels align perfectly, subdividing each tile into 4 smaller tiles. ** ** My pyramid property file contains the following, which I think looks fine (but then I’m the one having the problem J ): ** ** Levels=0.16011,0.16011 0.32023,0.32023 0.6405,0.6405 1.281,1.281 2.562,2.562 LevelsNum=5 Envelope2D=53.0,622.0 54.0,623.0 LevelsDirs=0 1 2 3 4 ** ** Does this help or can I provide any other information to shed light on this problem? ** ** Regards, Casper ** ** *From:* alessio.fabi...@gmail.com [mailto:alessio.fabi...@gmail.com] *On Behalf Of *Alessio Fabiani *Sent:* 22. maj 2012 11:24 *To:* Casper Børgesen (CABO) *Cc:* geoserver-users@lists.sourceforge.net *Subject:* Re: [Geoserver-users] Pyramid: Request is empty ** ** In principle the pyramid plugin choose the best overview accordingly to the zoom level you are requesting. ** ** You should be able to see several sub-directories under the pyramid root, related to the overview levels, each one containing a set of tiles and a shapefile with some other indexes for the the mosaic. ** ** My suspect is that one of those levels has not been correctly generated.** ** ** ** Regards, Alessio. ** ** --- Ing. Alessio Fabiani Founder / CTO GeoSolutions S.A.S. GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: (+39) 0584 96.23.13 fax: (+39) 0584 96.23.13 mobile:(+39) 331 62.33.686 http://www.geo-solutions.it http://geo-solutions.blogspot.com http://www.linkedin.com/in/alessiofabiani https://twitter.com/alfa7961 http://twitter.com/geosolutions_it --- On Tue, May 22, 2012 at 10:25 AM, Casper Børgesen (CABO) c...@niras.dk wrote: I guess the ImagePyramid plugin does the mosaic’ing for me, so I don’t know if its correctly generated and georeferenced. What puzzles me is that the zoom levels most zoomed out, is working, the middle zoom levels are white and the zoom levels most zoomed in, is working. The tiles are generated by gdal_retile and I assume that the tiles are generated in the same matter, thus all being georeferenced. I don’t really know where to start debugging into this problem, so any help is much appreciated. Med venlig hilsen *Casper Børgesen* Projektleder *NIRAS BlomInfo A/S* Sortemosevej 19, 3450 Allerød www.niras.com Telefon 4810 4200, Fax 4810 4300 Direkte 4810 4673 c...@niras.dk *From:* alessio.fabi...@gmail.com [mailto:alessio.fabi...@gmail.com] *On Behalf Of *Alessio Fabiani *Sent:* 22. maj 2012 10:14 *To:* Casper Børgesen (CABO) *Cc:* geoserver-users@lists.sourceforge.net *Subject:* Re: [Geoserver-users] Pyramid: Request is empty Are you sure the mosaic for the zoom level are you requesting is correctly generated and georeferenced? Regards, Alessio. --- Ing. Alessio Fabiani Founder / CTO GeoSolutions S.A.S. GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: (+39) 0584 96.23.13 fax: (+39) 0584 96.23.13 mobile:(+39) 331 62.33.686 http://www.geo-solutions.it http://geo-solutions.blogspot.com http://www.linkedin.com/in/alessiofabiani https://twitter.com/alfa7961 http://twitter.com/geosolutions_it --- ** ** On Tue, May 22, 2012 at 8:46 AM, Casper Børgesen (CABO) c...@niras.dk wrote: Hi! I have set up an image pyramid based on 5 levels of tiling. The data is served using the ImagePyramid plugin
Re: [Geoserver-users] Pyramid: Request is empty
Are you sure the mosaic for the zoom level are you requesting is correctly generated and georeferenced? Regards, Alessio. --- Ing. Alessio Fabiani Founder / CTO GeoSolutions S.A.S. GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: (+39) 0584 96.23.13 fax: (+39) 0584 96.23.13 mobile:(+39) 331 62.33.686 http://www.geo-solutions.it http://geo-solutions.blogspot.com http://www.linkedin.com/in/alessiofabiani https://twitter.com/alfa7961 http://twitter.com/geosolutions_it --- On Tue, May 22, 2012 at 8:46 AM, Casper Børgesen (CABO) c...@niras.dkwrote: Hi! I have set up an image pyramid based on 5 levels of tiling. The data is served using the ImagePyramid plugin for GeoServer. When I do a layer preview the data is visualized just like I expect them to be. But when I zoom in a couple of levels, I get a white tile in return. The GeoServer log tells me the following: *2012-05-14 08:07:07,495 DEBUG [gce.imagemosaic] - Reading mosaic from file:/e:/GeoServer/data_dir/data/pyramid/2/2.shp* *2012-05-14 08:07:07,495 DEBUG [gce.imagemosaic] - Highest res 0.6405 0.6405* *2012-05-14 08:07:07,495 DEBUG [gce.imagemosaic] - The computed CropBoundingBox ReferencedEnvelope[534687.5 : 535156.25, 6225625.0 : 6226093.75] Doesn't intersect the coverage BoundingBox ReferencedEnvelope[-1.0 : 0.0, -1.0 : 0.0] resulting in an empty request** *** *2012-05-14 08:07:07,495 DEBUG [gce.imagemosaic] - RequestedBBox empty or null* *2012-05-14 08:07:07,495 DEBUG [gce.imagemosaic] - Request is empty: RasterLayerRequest description: * * RequestedBBox=ReferencedEnvelope[534687.5 : 535156.25, 6225625.0 : 6226093.75]* * RequestedRasterArea=java.awt.Rectangle[x=0,y=0,width=768,height=768]* * RequestedGridToWorld=PARAM_MT[Affine, * * PARAMETER[num_row, 3], * * PARAMETER[num_col, 3], * * PARAMETER[elt_0_0, 0.6103515625], * * PARAMETER[elt_0_2, 534687.8051757812], * * PARAMETER[elt_1_1, -0.6103515625], * * PARAMETER[elt_1_2, 6226093.444824219]]* * ReadType=JAI_IMAGEREAD* *2012-05-14 08:07:07,495 DEBUG [gce.imagemosaic] - The response is empty. == returning a null GridCoverage* The extent of the data is [53, 622, 54, 623] and the projection EPSG:25832, which the GeoServer admin interface agree on. Then what could be the reason for GeoServer to look inside the BBOX [-1, 0, -1, 0], when my data is inside the requested map? Regards, Casper -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Need help with maps from scratch...
http://demo.geo-solutions.it/share/foss4g2011/gs_styling_aaime_foss4g2011.pdf Regards, Alessio. --- Ing. Alessio Fabiani Founder / CTO GeoSolutions S.A.S. GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: (+39) 0584 96.23.13 fax: (+39) 0584 96.23.13 mobile:(+39) 331 62.33.686 http://www.geo-solutions.it http://geo-solutions.blogspot.com http://www.linkedin.com/in/alessiofabiani https://twitter.com/alfa7961 http://twitter.com/geosolutions_it --- On Sun, May 20, 2012 at 10:36 AM, Aleksandar Kirovski al...@live.comwrote: Hello my name is Aleksandar, I have a school project to create a new map with layers using uDIG program. After examining the program I figured that it uses the GeoServer for maps, data, layers etc. Is there any good tutorial or documentation that focuses how to build map with layers from scratch in GeoServer (not just adding them in the server) and than how to draw on that layers that creates the map. Thanks. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Pyramid: Request is empty
In principle the pyramid plugin choose the best overview accordingly to the zoom level you are requesting. You should be able to see several sub-directories under the pyramid root, related to the overview levels, each one containing a set of tiles and a shapefile with some other indexes for the the mosaic. My suspect is that one of those levels has not been correctly generated. Regards, Alessio. --- Ing. Alessio Fabiani Founder / CTO GeoSolutions S.A.S. GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: (+39) 0584 96.23.13 fax: (+39) 0584 96.23.13 mobile:(+39) 331 62.33.686 http://www.geo-solutions.it http://geo-solutions.blogspot.com http://www.linkedin.com/in/alessiofabiani https://twitter.com/alfa7961 http://twitter.com/geosolutions_it --- On Tue, May 22, 2012 at 10:25 AM, Casper Børgesen (CABO) c...@niras.dkwrote: I guess the ImagePyramid plugin does the mosaic’ing for me, so I don’t know if its correctly generated and georeferenced. What puzzles me is that the zoom levels most zoomed out, is working, the middle zoom levels are white and the zoom levels most zoomed in, is working. ** ** The tiles are generated by gdal_retile and I assume that the tiles are generated in the same matter, thus all being georeferenced. ** ** I don’t really know where to start debugging into this problem, so any help is much appreciated. ** ** Med venlig hilsen ** ** *Casper Børgesen* Projektleder *NIRAS **BlomInfo A/S* Sortemosevej 19, 3450 Allerød www.niras.com Telefon 4810 4200, Fax 4810 4300 Direkte 4810 4673 c...@niras.dk ** ** *From:* alessio.fabi...@gmail.com [mailto:alessio.fabi...@gmail.com] *On Behalf Of *Alessio Fabiani *Sent:* 22. maj 2012 10:14 *To:* Casper Børgesen (CABO) *Cc:* geoserver-users@lists.sourceforge.net *Subject:* Re: [Geoserver-users] Pyramid: Request is empty ** ** Are you sure the mosaic for the zoom level are you requesting is correctly generated and georeferenced? ** ** Regards, Alessio. ** ** --- Ing. Alessio Fabiani Founder / CTO GeoSolutions S.A.S. GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: (+39) 0584 96.23.13 fax: (+39) 0584 96.23.13 mobile:(+39) 331 62.33.686 http://www.geo-solutions.it http://geo-solutions.blogspot.com http://www.linkedin.com/in/alessiofabiani https://twitter.com/alfa7961 http://twitter.com/geosolutions_it --- On Tue, May 22, 2012 at 8:46 AM, Casper Børgesen (CABO) c...@niras.dk wrote: Hi! I have set up an image pyramid based on 5 levels of tiling. The data is served using the ImagePyramid plugin for GeoServer. When I do a layer preview the data is visualized just like I expect them to be. But when I zoom in a couple of levels, I get a white tile in return. The GeoServer log tells me the following: *2012-05-14 08:07:07,495 DEBUG [gce.imagemosaic] - Reading mosaic from file:/e:/GeoServer/data_dir/data/pyramid/2/2.shp* *2012-05-14 08:07:07,495 DEBUG [gce.imagemosaic] - Highest res 0.6405 0.6405* *2012-05-14 08:07:07,495 DEBUG [gce.imagemosaic] - The computed CropBoundingBox ReferencedEnvelope[534687.5 : 535156.25, 6225625.0 : 6226093.75] Doesn't intersect the coverage BoundingBox ReferencedEnvelope[-1.0 : 0.0, -1.0 : 0.0] resulting in an empty request** *** *2012-05-14 08:07:07,495 DEBUG [gce.imagemosaic] - RequestedBBox empty or null* *2012-05-14 08:07:07,495 DEBUG [gce.imagemosaic] - Request is empty: RasterLayerRequest description: * * RequestedBBox=ReferencedEnvelope[534687.5 : 535156.25, 6225625.0 : 6226093.75]* * RequestedRasterArea=java.awt.Rectangle[x=0,y=0,width=768,height=768]* * RequestedGridToWorld=PARAM_MT[Affine, * * PARAMETER[num_row, 3], * * PARAMETER[num_col, 3], * * PARAMETER[elt_0_0, 0.6103515625], * * PARAMETER[elt_0_2, 534687.8051757812], * * PARAMETER[elt_1_1, -0.6103515625], * * PARAMETER[elt_1_2, 6226093.444824219]]* * ReadType=JAI_IMAGEREAD* *2012-05-14 08:07:07,495 DEBUG [gce.imagemosaic] - The response is empty. == returning a null GridCoverage* The extent of the data is [53, 622, 54, 623] and the projection EPSG:25832, which the GeoServer admin interface agree on. Then what could be the reason for GeoServer to look inside the BBOX [-1, 0, -1, 0], when my data is inside the requested map? Regards, Casper
Re: [Geoserver-users] Want to migrate from geoserver 1.7.x to 2.2 beta
Hai Manik, if you could provide some log files it would be very helpfull to better understand the issue. Regards, Alessio. --- Ing. Alessio Fabiani Founder / CTO GeoSolutions S.A.S. GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: (+39) 0584 96.23.13 fax: (+39) 0584 96.23.13 mobile:(+39) 331 62.33.686 http://www.geo-solutions.it http://geo-solutions.blogspot.com http://www.linkedin.com/in/alessiofabiani https://twitter.com/alfa7961 http://twitter.com/geosolutions_it --- On Thu, May 17, 2012 at 7:14 AM, Manik Goyal manik.go...@rmsi.com wrote: Hi , I am currently working on geoserver 1.7.x and want to migrate to 2.2 beta version ,I copied the data folder from 1.7.x version to the 2.2 as mentioned in one of your blog still all the my layers/styles that i created in older version (geoserver 1.7.x) is not showing up in geoserver 2.2 beta version, although all the pre-loaded(default) styles and layers are available, please let me know , what went wrong and how can I migrate from geoserver 1.7 to geoserver 2.2. Thanks Regards Manik Goyal Disclaimer: This message and any attachments contain information that may be RMSI Private Limited. confidential and/or privileged. If you are not the intended recipient (or authorized to receive for the intended recipient), and have received this message in error, any use, disclosure or distribution is strictly prohibited. If you have received this message in error, please notify the sender immediately by replying to the e-mail and permanently deleting the message from your computer and/or storage system * ** http://www.rmsi.com * http://www.rmsi.com/ -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users