Re: Error Message ARC0744E MCDS COULD NOT BE BACKED UP, RC=0036
George, try to get a look to the D0003983 datasets; maybe one of those has an invalid format. Paolo Cacciari IBM Senior IT Specialist - Certified From: George Rodriguez george.rodrig...@palmbeachschools.org To: IBM-MAIN@bama.ua.edu Date: 15/03/2012 14:01 Subject:Re: Error Message ARC0744E MCDS COULD NOT BE BACKED UP, RC=0036 Sent by:IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu Dave, Here's what I got: F DFSMSHSM,Q CDSVERSIONBACKUP ARC0101I QUERY CDSVERSIONBACKUP COMMAND STARTING ON 743 ARC0101I (CONT.) HOST=1 ARC0375I CDSVERSIONBACKUP, 744 ARC0375I (CONT.) MCDSBACKUPDSN=DFHSM.MCDS.BACKUP, ARC0375I (CONT.) BCDSBACKUPDSN=DFHSM.BCDS.BACKUP, ARC0375I (CONT.) OCDSBACKUPDSN=DFHSM.OCDS.BACKUP, ARC0375I (CONT.) JRNLBACKUPDSN=DFHSM.JRNL.BACKUP ARC0376I BACKUPCOPIES=0007, BACKUPDEVICECATEGORY=DASD, 745 ARC0376I (CONT.) LATESTFINALQUALIFIER=D0003988, DATAMOVER=DSS ARC0101I QUERY CDSVERSIONBACKUP COMMAND COMPLETED ON 746 ARC0101I (CONT.) HOST=1 it looks like 3988 is the last good on and I have it out there... * * *George Rodriguez* *Specialist II - IT Solutions* *Application Support / Quality Assurance* *PX - 47652* *(561) 357-7652 (office)* *(561) 707-3496 (mobile)* *School District of Palm Beach County* *3348 Forest Hill Blvd.* *Room B-251* *West Palm Beach, FL. 33406-5869* *Florida's Only A-Rated Urban District For Seven Consecutive Years* On Thu, Mar 15, 2012 at 8:51 AM, O'Brien, David W. (NIH/CIT) [C] obrie...@mail.nih.gov wrote: It won't hurt to issue the query to find out what HSM is looking for. -Original Message- From: George Rodriguez [mailto:george.rodrig...@palmbeachschools.org] Sent: Thursday, March 15, 2012 8:43 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Error Message ARC0744E MCDS COULD NOT BE BACKED UP, RC=0036 Even though I didn't get the ARC0745E error message? I looked for it... * * *George Rodriguez* *Specialist II - IT Solutions* *Application Support / Quality Assurance* *PX - 47652* *(561) 357-7652 (office)* *(561) 707-3496 (mobile)* *School District of Palm Beach County* *3348 Forest Hill Blvd.* *Room B-251* *West Palm Beach, FL. 33406-5869* *Florida's Only A-Rated Urban District For Seven Consecutive Years* On Thu, Mar 15, 2012 at 8:39 AM, O'Brien, David W. (NIH/CIT) [C] obrie...@mail.nih.gov wrote: George, I would suggest following the steps outlined in ARC0745E or opening a ticket with IBM. -Original Message- From: George Rodriguez [mailto:george.rodrig...@palmbeachschools.org] Sent: Thursday, March 15, 2012 8:32 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Error Message ARC0744E MCDS COULD NOT BE BACKED UP, RC=0036 No, none of them have. Here's the display of the backups: DFHSM.BCDS *VSAM* DFHSM.BCDS.BACKUP.D0003983 PHSM01 DFHSM.BCDS.BACKUP.D0003984 PHSM01 DFHSM.BCDS.BACKUP.D0003985 PHSM01 DFHSM.BCDS.BACKUP.D0003986 PHSM01 DFHSM.BCDS.BACKUP.D0003987 PHSM01 DFHSM.BCDS.BACKUP.D0003988 PHSM01 DFHSM.BCDS.DATAPHSM04 DFHSM.BCDS.INDEX PHSM04 DFHSM.MCDS *VSAM* DFHSM.MCDS.BACKUP.D0003983 PHSM02 DFHSM.MCDS.BACKUP.D0003984 PHSM02 DFHSM.MCDS.BACKUP.D0003985 PHSM02 DFHSM.MCDS.BACKUP.D0003986 PHSM02 DFHSM.MCDS.BACKUP.D0003987 PHSM02 DFHSM.MCDS.BACKUP.D0003988 PHSM02 DFHSM.MCDS.DATAPHSM04 DFHSM.MCDS.INDEX PHSM04 DFHSM.OCDS *VSAM* DFHSM.OCDS.BACKUP.D0003983 PHSM03 DFHSM.OCDS.BACKUP.D0003984 PHSM03 DFHSM.OCDS.BACKUP.D0003985 PHSM03 DFHSM.OCDS.BACKUP.D0003986 PHSM03 DFHSM.OCDS.BACKUP.D0003987 PHSM03 DFHSM.OCDS.BACKUP.D0003988 PHSM03 DFHSM.OCDS.DATAPHSM04 DFHSM.OCDS.INDEX PHSM04 I even thought it might be space, but it's not that either. * * *George Rodriguez* *Specialist II - IT Solutions* *Application Support / Quality Assurance* *PX - 47652* *(561) 357-7652 (office)* *(561) 707-3496 (mobile)* *School District of Palm Beach County* *3348 Forest Hill
Re: Error Message ARC0744E MCDS COULD NOT BE BACKED UP, RC=0036
George, ARC0744E RC36 is the result of missing or misnamed preallocated CDS backup data sets. It says the MHCR and CATALOG entries for the most recent BACKUP CDS version don't match. Try to issue the command: QUERY CDSV to see what HSM is seeing as the most recent version number. Try also to verify what you had specified in ARCCMDxx member for VERSION name. Paolo Cacciari IBM Senior IT Specialist - Certified From: George Rodriguez george.rodrig...@palmbeachschools.org To: IBM-MAIN@bama.ua.edu Date: 15/03/2012 14:30 Subject:Re: Error Message ARC0744E MCDS COULD NOT BE BACKED UP, RC=0036 Sent by:IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu Hi Paolo, Every single one looks like this: Data Set Name . . . . : DFHSM.MCDS.BACKUP.D0003983 General Data Current Allocation Management class . . : **None**Allocated cylinders : 65 Storage class . . . : **None**Allocated extents . : 10 Volume serial . . . : PHSM02 Device type . . . . : 3390 Data class . . . . . : **None** Organization . . . : PS Current Utilization Record format . . . : U Used cylinders . . : 63 Record length . . . : 0 Used extents . . . : 10 Block size . . . . : 18432 1st extent cylinders: 20 Secondary cylinders : 5 Dates Data set name type : Creation date . . . : 2002/06/07 SMS Compressible. . : NO Referenced date . . : 2012/03/15 Expiration date . . : ***None*** I even browsed the file and it looks good... *George Rodriguez* *Specialist II - IT Solutions* *Application Support / Quality Assurance* *PX - 47652* *(561) 357-7652 (office)* *(561) 707-3496 (mobile)* *School District of Palm Beach County* *3348 Forest Hill Blvd.* *Room B-251* *West Palm Beach, FL. 33406-5869* *Florida's Only A-Rated Urban District For Seven Consecutive Years* On Thu, Mar 15, 2012 at 9:20 AM, Paolo Cacciari paolo.cacci...@it.ibm.comwrote: George, try to get a look to the D0003983 datasets; maybe one of those has an invalid format. Paolo Cacciari IBM Senior IT Specialist - Certified From: George Rodriguez george.rodrig...@palmbeachschools.org To: IBM-MAIN@bama.ua.edu Date: 15/03/2012 14:01 Subject:Re: Error Message ARC0744E MCDS COULD NOT BE BACKED UP, RC=0036 Sent by:IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu Dave, Here's what I got: F DFSMSHSM,Q CDSVERSIONBACKUP ARC0101I QUERY CDSVERSIONBACKUP COMMAND STARTING ON 743 ARC0101I (CONT.) HOST=1 ARC0375I CDSVERSIONBACKUP, 744 ARC0375I (CONT.) MCDSBACKUPDSN=DFHSM.MCDS.BACKUP, ARC0375I (CONT.) BCDSBACKUPDSN=DFHSM.BCDS.BACKUP, ARC0375I (CONT.) OCDSBACKUPDSN=DFHSM.OCDS.BACKUP, ARC0375I (CONT.) JRNLBACKUPDSN=DFHSM.JRNL.BACKUP ARC0376I BACKUPCOPIES=0007, BACKUPDEVICECATEGORY=DASD, 745 ARC0376I (CONT.) LATESTFINALQUALIFIER=D0003988, DATAMOVER=DSS ARC0101I QUERY CDSVERSIONBACKUP COMMAND COMPLETED ON 746 ARC0101I (CONT.) HOST=1 it looks like 3988 is the last good on and I have it out there... * * *George Rodriguez* *Specialist II - IT Solutions* *Application Support / Quality Assurance* *PX - 47652* *(561) 357-7652 (office)* *(561) 707-3496 (mobile)* *School District of Palm Beach County* *3348 Forest Hill Blvd.* *Room B-251* *West Palm Beach, FL. 33406-5869* *Florida's Only A-Rated Urban District For Seven Consecutive Years* On Thu, Mar 15, 2012 at 8:51 AM, O'Brien, David W. (NIH/CIT) [C] obrie...@mail.nih.gov wrote: It won't hurt to issue the query to find out what HSM is looking for. -Original Message- From: George Rodriguez [mailto:george.rodrig...@palmbeachschools.org] Sent: Thursday, March 15, 2012 8:43 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Error Message ARC0744E MCDS COULD NOT BE BACKED UP, RC=0036 Even though I didn't get the ARC0745E error message? I looked for it... * * *George Rodriguez* *Specialist II - IT Solutions* *Application Support / Quality Assurance* *PX - 47652* *(561) 357-7652 (office)* *(561) 707-3496 (mobile)* *School District of Palm Beach County* *3348 Forest Hill Blvd.* *Room B-251* *West Palm Beach, FL. 33406-5869* *Florida's Only A-Rated Urban District For Seven Consecutive Years* On Thu, Mar 15, 2012 at 8:39 AM, O'Brien, David W. (NIH/CIT) [C] obrie...@mail.nih.gov wrote: George, I would suggest following the steps outlined in ARC0745E or opening a ticket with IBM. -Original Message- From: George Rodriguez [mailto:george.rodrig...@palmbeachschools.org ] Sent: Thursday, March 15, 2012 8:32 AM To: IBM-MAIN@bama.ua.edu Subject: Re
Re: z/OS Tag Sort
John, AFAIK, your problemis tracked by this message: ICE2471 INTERMEDIATE MERGE ENTERED - PERFORMANCE MAY BE DEGRADED. To avoid this situation, increase the DFSORT installation default DSA from it's shipped default of DSA=64 to DSA=500 to allow these larger sorts to allocate up to 500MB of virtual storage if needed. For very large sorts, consider increasing it up to 2000, which would allow the sort to use as much region as is available if needed. Note that DFSORT's dynamic storage adjustment calculates the optimum amount of virtual storage for each sort and the DSA parameter is a limit. So increasing DSA will not cause every sort to use more virutal storage but instead allow sorts that need a larger amount of virtual storage to do so. Hope this helps Paolo Cacciari - IBM Italy - BCRS IBM Italia S.p.A. Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI) Cap. Soc. euro 384.747.048,00 C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153 Società soggetta all?attività di direzione e coordinamento di International Business Machines Corporation (Salvo che sia diversamente indicato sopra / Unless stated otherwise above) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: RACF server disabled During IPL
Jags, first of all, try the T PROD=00 command to see if this is going to activate RACF server. After that, double check your parmlib chain to verify that the correct IFAPRDxx is picked up... Regards. _ Paolo Cacciari IBM Italia S.p.A. Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA IBM Italia S.p.A. Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI) Cap. Soc. euro 384.747.048,00 C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153 Società soggetta all?attività di direzione e coordinamento di International Business Machines Corporation (Salvo che sia diversamente indicato sopra / Unless stated otherwise above) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Problem with HSM Recalls
Allan, probably HSM is trying to restore your dataset into its original VOLUME, and this volume is no more active in your configuration. Try to supply a VOLSER to HSM to relocate the dataset on another dasd. HTH _ Paolo Cacciari IBM Italia S.p.A. Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI) Cap. Soc. euro 384.747.048,00 C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153 Società soggetta all?attività di direzione e coordinamento di International Business Machines Corporation (Salvo che sia diversamente indicato sopra / Unless stated otherwise above) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IGD17070I - Where is RC=12 Reason=5F01083F explained better?
Peter, The meaning of IGD17162I RETURN CODE (12) REASON CODE (5F01083F) is as follows: 5F = Compression Management Services. 01 = Module ID (01 = CMPSVCAL (allocation)) 083F = RS_NO_BENEFIT RETURN CODE (12) (X'0C') with 083F = RS_NO_BENEFIT means: The data set is not eligible for compression. The data set attributes show that the data set will not benefit in space utilization or number of I/O operations from the compression. Compression might incur unnecessary overhead for its data processing. The requirements for compression are as follows: - The data set must already have met the requirements for Extended Format. - Compression Management Services requires the data set to have primary allocation of at least 5 megabytes in order to be allocated as a compressed data set. - Compression Management Services requires the data set to have a primary allocation of 8 MB if no secondary allocation is specified, in order to be allocated as a compressed data set. - Compression Management Services requires that the data set have a minimum record length of forty (40) bytes, not including the key offset or key length. Note: For VSAM KSDS, the CMS requirement to have a primary allocation of 5 MB is due to the amount of sampling needed to develop a dictionary token. The 5 MB allocation MUST be for the data component only. If the amount is specified at the cluster level, then the index component will use a portion of the 5 megabyte allocation. This will result in the data set not meeting the CMS space requirement, and the data set will not be eligible for compression processing. The above is also true for the 8 MB primary allocation if no secondary is specified. _ Paolo Cacciari IBM Italia S.p.A. Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA IBM Italia S.p.A. Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI) Cap. Soc. euro 384.506.359,00 C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153 Società soggetta all?attività di direzione e coordinamento di International Business Machines Corporation (Salvo che sia diversamente indicato sopra / Unless stated otherwise above) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IGD17070I - Where is RC=12 Reason=5F01083F explained better?
Peter, try this: z/OS V1R11.0 DFSMSdfp Diagnosis _ Paolo Cacciari IBM Italia S.p.A. Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA IBM Italia S.p.A. Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI) Cap. Soc. euro 384.506.359,00 C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153 Società soggetta all?attività di direzione e coordinamento di International Business Machines Corporation (Salvo che sia diversamente indicato sopra / Unless stated otherwise above) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Z10 BC DS8700 Storage issue
Srnivas, double check DS8700 Channel Paths and be sure they're ONLINE... If they are, check your IOCDS and verify that CHPs/CUs are assigned to your LPAR (if you are IPLing one...). Ciao. _ Paolo Cacciari IBM Italia S.p.A. Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA IBM Italia S.p.A. Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI) Cap. Soc. euro 384.506.359,00 C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153 Società soggetta all?attività di direzione e coordinamento di International Business Machines Corporation (Salvo che sia diversamente indicato sopra / Unless stated otherwise above) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Z10 BC DS8700 Storage issue
Srinivas, about power sequence: DS8700 must be up and running before you can use it That's obvious... Anyway, try to vary DS8700 CHPIDS off and on again and retry If the problem persist, maybe we need more elements to analyze it, like msgs, IOCDS infos and so on. Ciao. _ Paolo Cacciari IBM Italia S.p.A. Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA IBM Italia S.p.A. Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI) Cap. Soc. euro 384.506.359,00 C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153 Società soggetta all?attività di direzione e coordinamento di International Business Machines Corporation (Salvo che sia diversamente indicato sopra / Unless stated otherwise above) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IRA400E
Sharon, in my opinion, this is a too much buffer usage symtom for your XRC complex. The total amount of fixed buffers for your four SDM sessions is very close (or maybe exceeds) the amount of REAL memory assigned to SDM LPAR. This problem maybe originated by many sources: - spike on writes on your primary dasd subsystems; - performance problem on your journal dasd subsystem; - performance problem on your secondary dasd subsystem; - too much fixed buffers for your LPAR real storage amount. If you have XRC/PM active, you can see what happened looking at history data. Anyway, you can get a regular look to your SDM environment, using XRC commands to monitor delays. Hope this helps. Ciao Paolo Cacciari - IBM Italy BCRS datacenter - Sharon wrote. Has anyone seen this on your SDM (SYSTEM DATA MOVER) lpars? IRA400E 04,PAGEABLE STORAGE SHORTAGE *IRA404I ANTAS001 ASID 0131 OWNS 386726 PAGES, 326911 FIXED, 158567 FIXED IN SHORTAGE AREA *IRA404I ANTAS003 ASID 0140 OWNS 388012 PAGES, 311695 FIXED, 114506 FIXED IN SHORTAGE AREA *IRA404I ANTAS004 ASID 013E OWNS 382314 PAGES, 340669 FIXED, 114061 FIXED IN SHORTAGE AREA *IRA404I ANTAS002 ASID 0024 OWNS 387917 PAGES, 340053 FIXED, 002642 FIXED IN SHORTAGE AREA *IRA404I *MASTER* ASID 0001 OWNS 006377 PAGES, 003666 FIXED, 000388 FIXED IN SHORTAGE AREA IBM Italia S.p.A. Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI) Cap. Soc. euro 384.506.359,00 C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153 Società soggetta all?attività di direzione e coordinamento di International Business Machines Corporation (Salvo che sia diversamente indicato sopra / Unless stated otherwise above) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: ANTX8117I
Sharon, I guess you haven't XRC Performanc Monitor runing on yor SDM Anyway, you probably have an overloaded XRC primary volume (maybe more than one) that belongs to ADCP04 session. To identify this (those) volume(s), try this command: XQUERY ADCP04 VOLUME(ALL) PACE Get a look to system answer and mainly to RES CNT column: an high value on field indicates a probably overloaded volume... Once identified guilty volumes, you can try to lower volume load, moving datasets or, better, move entire volume on a LSS less critical in terms of I/O load... If not already done, try to use WRITE PACING As last resort, double check your network connections Hope this helps.. Ciao Paolo Cacciari IBM Italia S.p.A. Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Lopez, Sharon Sent: Wednesday, September 29, 2010 8:43 AM To: IBM-MAIN@bama.ua.edu Subject: ANTX8117I Please someone help usWe started getting this message this week on our data mover lpar: ANTX8117I XRC SESSION(EDCP02) DELAY DETECTED AT MASTER(EDCPMSTR:EDCP04); SESSION CONSISTENCY DELAY(00:05:32.74) We have been doing XRC now for about 9 months and this is the first time this has occurred. We just went from a z9 to a z10 at our primary site (not sure this is related) but we need to figure why this is occurring. Can someone please help? I have a ticket opened with IBM and they have a dump but I just wanted to see if anyone else has experienced this error before. Thanks. IBM Italia S.p.A. Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI) Cap. Soc. euro 384.506.359,00 C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153 Società soggetta all?attività di direzione e coordinamento di International Business Machines Corporation (Salvo che sia diversamente indicato sopra / Unless stated otherwise above) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: EKM at z/OS 1.11
Richard, we currently use EKM under Z/os 1.11. No problems or exceptions found after migration to new release. Best regards _ Paolo Cacciari IBM Italia S.p.A. Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA From: Richard Peurifoy r-peuri...@neo.tamu.edu To: IBM-MAIN@bama.ua.edu Date: 26/04/2010 17.08 Subject: EKM at z/OS 1.11 Sent by: IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu We are upgrading to z/OS 1.11, and EKM is having problems. I get the following when an tape to be encypted is mounted: Logic:validateDKiAlias:testing alias=TAMMVS1 rest of cert label Logic:validateDKiAlias:suffix=MVS1 rest of cert label validateDKiAlias:wrong format 'TAMMVS1 rest of cert label' is a valid certificate label which has been workinf at z/OS 1.9. I don't know where 'MVS1 rest of cert label' came from, I don't have a certificate like this, and haven't defined this anywhere I can find. I am wondering if PK59178 and PK70752 might have something to do with this. I am contacting support, but thought I would see if anyone has seen this. Does anyone have EKM running on z/OS 1.11? Thanks, Richard -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html IBM Italia S.p.A. Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI) Cap. Soc. euro 384.506.359,00 C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153 Società soggetta all?attività di direzione e coordinamento di International Business Machines Corporation (Salvo che sia diversamente indicato sopra / Unless stated otherwise above) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: OS/390 2.4 guest under z/VM 5.3
Mark, we actually tried CP TRACE statement to let an OS/390 2.4 start under Z/VM 5.3 on a Z9 CPU, and it runs Provided that (as per our experience): 1 - you don't define more than ONE CP to the virtual machine; 2 - you don't assign more than 512MB of central storage to the virtual machine; under these assumptions, IPL was completed and all was up and running. Ciao. . snip ** Already cross-posted to IBMVM ** Hello all, am trying to run (believe it or not) an OS/390 2.4 guest under z/VM 5.3 (0703) on a CP (z990). The usual CP Directory statements are in place, memory is 1G. I am getting as far as the first reply request, see below: snip I hope this is not an architectural problem.. It is. You need at least OS/390 2.10 or higher plus the add-on compatibility and/or exploitation support. http://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/FLASH10236 You can also search the archives. There was a post in April 2006 and from Jim Mulder that suggested that this VM setting might get around the problem, but I don't recall anyone ever reporting that it worked or not: #CP TRACE IPTE RUN NOTERM http://bama.ua.edu/cgi-bin/wa?A2=ind0604L=ibm-mainD=1amp;O=DP=16015 ... snip _ Paolo Cacciari IBM Italia S.p.A. Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA Via Darwin 85, 20019 Settimo Milanese(MI) ? Italy - MISET001 IBM Italia S.p.A. Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI) Cap. Soc. euro 384.506.359,00 C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153 Società soggetta all?attività di direzione e coordinamento di International Business Machines Corporation (Salvo che sia diversamente indicato sopra / Unless stated otherwise above) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: OMVS INIT WAIT
Miklos wrote: ...snip In our production LPAR I had a terrible experience(you can't restart the system, it has worked 10 minutes before ) After some DISK errors I made an IPL , but TCPIP etc. has not started , and after a while of panic I have seen the OMVS is in init wait : OMVS 000E ETC/INIT WAIT In the third attempt, the OMVS (and everything) has started normally. We have every file system in zFS. I guess the OMVS zFS made the recovery ? If it would give a message about this ... ...snip Miklos, you must be aware that when ZFS tries a restart after some system failure (or sometimes when ZFS filesystem wasn't properly closed...) it discovers this situation and want to be sure that original owner(s) aren't still in charge of filesystem. For this, ZFS waits for about 90 seconds (per filesystem) awaiting for previous owner activity on filesystem (internal timestamps are updated in case of activity on filesystem). This is for EVERY ZFS filesystem; as per your configuration (all ZFS fsys) you may expect long delays on OMVS restart after failure or abnormal end of original ZFS owner. Hope this helps. Ciao. _ Paolo Cacciari IBM Italia S.p.A. Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA IBM Italia S.p.A. Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI) Cap. Soc. euro 384.506.359,00 C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153 Società soggetta all?attività di direzione e coordinamento di International Business Machines Corporation (Salvo che sia diversamente indicato sopra / Unless stated otherwise above) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: EKM and Hash Keys
I have not worked with this yet. My 3rd party wants me to use HASH instead of Dataclas for encrypting a tape. (I think I understood that correctly???) So what is the difference between using a HASH KEY and a DATACLAS with EKM? I am reading the books, but I still get lost in them. Lizette, maybe there's been some sort of misunderstanding HASH is a MODE of using a KEY to encrypt data on tape; the other one is LABEL. Usually you use HASH when are encrypting data using a PUBLIC certificate coming from a partner You can declare HASH mode in SMS dataclas or in DD JCL. Hope this helps. _ Paolo Cacciari IBM Italia S.p.A. Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA IBM Italia S.p.A. Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI) Cap. Soc. euro 400.001.359 C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153 Società soggetta all?attività di direzione e coordinamento di International Business Machines Corporation (Salvo che sia diversamente indicato sopra / Unless stated otherwise above) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: EKM and Hash Keys
YES, correct _ Paolo Cacciari IBM Italia S.p.A. Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA From: Lizette Koehler stars...@mindspring.com To: IBM-MAIN@bama.ua.edu Date: 11/05/2009 16.55 Subject: Re: EKM and Hash Keys Sent by: IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu Okay, so if I understand. I get the public key from the 3rd party client. I import the key into my environment. I code my JCL to use // KEYLABL1=?MyEKMServerJCEKS?, // KEYENCD1=L, // KEYLABL2=?CompanyXPublicKeyJCEKS?, // KEYENCD2=H, Where my public key is called MyEKMServerJCEKS and the 3rd party's public key is called CompayXPublicKeyJCEKS that I had imported into my system. My system is setup to use the JCERACFKS keystore for encryption with E05 Tape Drives in a TS3500. The KEYENCD2=H is where the HASH is handled? Lizette I have not worked with this yet. My 3rd party wants me to use HASH instead of Dataclas for encrypting a tape. (I think I understood that correctly???) So what is the difference between using a HASH KEY and a DATACLAS with EKM? I am reading the books, but I still get lost in them. Lizette, maybe there's been some sort of misunderstanding HASH is a MODE of using a KEY to encrypt data on tape; the other one is LABEL. Usually you use HASH when are encrypting data using a PUBLIC certificate coming from a partner You can declare HASH mode in SMS dataclas or in DD JCL. Hope this helps. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html IBM Italia S.p.A. Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI) Cap. Soc. euro 400.001.359 C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153 Società soggetta all?attività di direzione e coordinamento di International Business Machines Corporation (Salvo che sia diversamente indicato sopra / Unless stated otherwise above) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: EKM, JAVA and Tape Encryption
Lizett, it leaves in a /EKMETC filesystem (or usually, it does) in accordance to EKM installation manual. _ Paolo Cacciari IBM Italia S.p.A. Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA Via Darwin 85, 20019 Settimo Milanese(MI) ? Italy - MISET001 From: Lizette Koehler [EMAIL PROTECTED] To: IBM-MAIN@bama.ua.edu Date: 09/12/2008 17.58 Subject: Re: EKM, JAVA and Tape Encryption Where does com.ibm.keymanager.EKMServer live? What directory? Lizette In addition to what others have said, check the permissions on directory paths to the various files. Also, you have EKM_HOME as the ext directory under java. Is that correct, or should it be in your EKM directory. Larry Gray -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html IBM Italia S.p.A. Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI) Cap. Soc. euro 361.550.000 C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153 Società con Azionista Unico Società soggetta all?attività di direzione e coordinamento di International Business Machines Corporation (Salvo che sia diversamente indicato sopra / Unless stated otherwise above) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Sysplexing to the new z10s
.. I have a couple of z900s that I'm going to be upgrading to z10s. Now we're all aware of the restrictions of not being able to Sysplex the z900s directly to the z10s but I had a question. Would it be possible to use a z9 CF only CEC to 'bridge' the Sysplex connection between a z10 and a z900? This would allow us to do one of the z900s on a single weekend then the second on the next weekend pulling the z9 CF CEC out when done. Doing both z900s in a single weekend, while doable, is not something I'm looking forward to... ... Stanley, No, it is not possible to have a z800 or z900 coexisting in a parallel sysplex with a z10. Note that zSeries 900/800 and prior generation servers are not supported with System z10 for Coupling Facility or Parallel Sysplex levels. With the introduction of the z10 EC, we have the concept of n-2 on the hardware as well as the software. The z10 EC participates in a Sysplex with System z9, z990 and z890 only and currently supports z/OS 1.7 and higher. Hope this helps _ Paolo Cacciari IBM Italia S.p.A. From: WEYMAN, STANLEY J. [EMAIL PROTECTED] To: IBM-MAIN@BAMA.UA.EDU Date: 29/10/2008 14.11 Subject: Sysplexing to the new z10s I have a couple of z900s that I'm going to be upgrading to z10s. Now we're all aware of the restrictions of not being able to Sysplex the z900s directly to the z10s but I had a question. Would it be possible to use a z9 CF only CEC to 'bridge' the Sysplex connection between a z10 and a z900? This would allow us to do one of the z900s on a single weekend then the second on the next weekend pulling the z9 CF CEC out when done. Doing both z900s in a single weekend, while doable, is not something I'm looking forward to... Regards, Stan - Stan Weyman Corporate Information Services System Administrator III Amica Mutual Insurance Company 25 Amica Way Lincoln, RI 02865 voice: 1-800-992-6422 ext. 22679 fax: 1-401-334-2748 email : [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] web:www.amica.com http://www.amica.com/ P Please consider the environment before printing this email -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html IBM Italia S.p.A. Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI) Cap. Soc. euro 361.550.000 C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153 Società con Azionista Unico Società soggetta all?attività di direzione e coordinamento di International Business Machines Corporation (Salvo che sia diversamente indicato sopra / Unless stated otherwise above) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: GDPS Hyperswap Concurrent Copy
Previously, we've executed the cmd F ANTAS000,LISTSESS ALL and we've not found any CC active. We've obtained dumps to analyze this scenario but we'd like to know if anyone knows another way to review if any CC really it exists. Christian, try to use FCQUERY command, and take a look to this link: http://www-01.ibm.com/support/docview.wss?uid=isg3S1001398 Hope this helps. Paolo Cacciari - IBM Italy - BCRS IBM Italia S.p.A. Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI) Cap. Soc. euro 361.550.000 C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153 Società con Azionista Unico Società soggetta all?attività di direzione e coordinamento di International Business Machines Corporation (Salvo che sia diversamente indicato sopra / Unless stated otherwise above) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: RMF reporting on PATHIN/PATHOUT CF
Lizette, check your PARMLIB member for RMF monitor III (usually ERBRMF04)... there should be a CFDETAIL statement. Having that, you can report on CF Activity. Hope this helps. _ Paolo Cacciari Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA Via Darwin 85, 20019 Settimo Milanese(MI) – Italy - MISET001 The goal is to be prepared for a disaster not to continually plan for a successful test * [EMAIL PROTECTED] ( + 39 051 41.36799 Mobile: + 39 335 6287584 7 + 39 02 596.23288 Fax BO: + 39 051 406052 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Problem Deleting DSN
Esmie, what I tink you can do is to check if you have such a FACILITY profile defined in your RACF configuration: STGADMIN.DPDSRN.dsname After having such a profile active, you can RENAME your dataset, using ISPF functions and using volser name to point to the DSN. After having renamed it, you can delete renamed DSN. Hope this helps. _ Paolo Cacciari Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA Via Darwin 85, 20019 Settimo Milanese(MI) – Italy - MISET001 The goal is to be prepared for a disaster not to continually plan for a successful test * [EMAIL PROTECTED] ( + 39 051 41.36799 Mobile: + 39 335 6287584 7 + 39 02 596.23288 Fax BO: + 39 051 406052 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: HTTP Server Abend
Matt, are you sharing your HFS in r/w with other systems (probably outside the plex...)??? Or, perhaps, are you sharing HFS (in r/w) between different OS levels??? _ Paolo Cacciari Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA Via Darwin 85, 20019 Settimo Milanese(MI) – Italy - MISET001 The goal is to be prepared for a disaster not to continually plan for a successful test * [EMAIL PROTECTED] ( + 39 051 41.36799 Mobile: + 39 335 6287584 7 + 39 02 596.23288 Fax BO: + 39 051 406052 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Global mirror for z/OS
Sharon, you can start with this manual: http://publibz.boulder.ibm.com/epubs/pdf/antgr131.pdf This could be an useful web page: http://www-1.ibm.com/support/docview.wss?rs=580uid=ssg1S7000860 For any questions, try to contact me offlist. Hope this hepls. Regards. _ Paolo Cacciari Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA Via Darwin 85, 20019 Settimo Milanese(MI) – Italy - MISET001 The goal is to be prepared for a disaster not to continually plan for a successful test * [EMAIL PROTECTED] ( + 39 051 41.36799 Mobile: + 39 335 6287584 7 + 39 02 596.23288 Fax BO: + 39 051 406052 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Dynamic PAV Device Limit?
. I have not been able to find any statement about whether WLM will put any limit on the number of aliases that can be assigned to a particular device when using Dynamic PAVs. Does anyone on the list know of a limit? Can anyone point me to a manual that would document whether this can occur or not? . Tom, no limits on Alias associated to a Base address by WLM. If your DASD IOSQ time is high, WLM can add Aliases to Base address until IOSQ time goes down. Sometimes WLM limits the number of Aliases if it determines that adding Aliases could interfere with other response times components, like DISCONNECT times or so on. In this case WLM has an arbitrary limit. Hope this helps. _ Paolo Cacciari Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA Via Darwin 85, 20019 Settimo Milanese(MI) – Italy - MISET001 The goal is to be prepared for a disaster not to continually plan for a successful test * [EMAIL PROTECTED] ( + 39 051 41.36799 Mobile: + 39 335 6287584 7 + 39 02 596.23288 Fax BO: + 39 051 406052 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Change CFRM policy name for IPL
snip.. LPAR numbers will be changed during next IPL. The number of CF LPAR will change. The system (resides on the same CPC) uses GRS=STAR, so valid CF policy is required during IPL. I can prepare new CFRM policy to reflect the change. However default policy is last used one. Q: How can I fix the policy name for IPL ? Is it CFRMPOL(policy_name) in COUPLExx? snip ... Roland, this can be an option for you: 1 - allocate a NEW FORMATTED XCF couple dataset (primary and alternate) 2 - allocate a NEW FORMATTED CFRM couple dataset (primary and alternate) 3 - write a NEW CFRM POLICY in new datasets, addressing your new CF LPAR 4 - set up a COUPLExx member in PARMLIB to address new XCF cuple datasets, new CFRM couple datasets and use CFRMPOL(xxx) to activate your NEW CFRM policy (see -3- above) Hope this helps.. Regards _ Paolo Cacciari Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA Via Darwin 85, 20019 Settimo Milanese(MI) – Italy - MISET001 The goal is to be prepared for a disaster not to continually plan for a successful test * [EMAIL PROTECTED] ( + 39 051 41.36799 Mobile: + 39 335 6287584 7 + 39 02 596.23288 Fax BO: + 39 051 406052 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Console named *DICNsysclone.
Barbara, console id *DICNSxx is a typical name of a DIDOCS console, introduced after Console Restructure stages (time ago...) From internal documentation... The DIDOCS EMCS console, named *DICNSxx, where xx is the value of SYSCLONE. (This EMCS is for any messages going to any MCS or SMCS.) Hope this helps. _ Paolo Cacciari Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA Via Darwin 85, 20019 Settimo Milanese(MI) – Italy - MISET001 The goal is to be prepared for a disaster not to continually plan for a successful test * [EMAIL PROTECTED] ( + 39 051 41.36799 Mobile: + 39 335 6287584 7 + 39 02 596.23288 Fax BO: + 39 051 406052 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: How can I give the volume unit address and return the volume name from REXX
Tommy, try this: /* REXX */ parse upper arg volser address tso CONSPROF SOLDISPLAY(NO) address tso CONSOLE ACTIVATE NAME(DASD) CART(BRSaddr) address console D U,VOL=volser displ = GETMSG('resp.','SOL',,,1) parse upper value resp.3 with voladdr type status volume . volume = strip(volume) if volser ^= volume then do say '* Volume ' volser 'not found in system' end else do say '* Volume ' volser 'found in system at address:' voladdr end address tso CONSOLE DEACTIVATE exit execute the REXX clist giving your volume name as parameter. Hope this helps. _ Paolo Cacciari Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA Via Darwin 85, 20019 Settimo Milanese(MI) – Italy - MISET001 The goal is to be prepared for a disaster not to continually plan for a successful test * [EMAIL PROTECTED] ( + 39 051 41.36799 Mobile: + 39 335 6287584 7 + 39 02 596.23288 Fax BO: + 39 051 406052 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Shared ICP between 2 SYSPLEXES
Well, I think you can't do that. on every side of a peer link you can have ONE and only ONE CF. In your case, you have to add a second peer link for new sysplex. Otherwise, you have to rebuild your configuration, using a couple of peer links (no redoundancy) for both PLEX1a and PLEX1b reusing your second peer couple for new sysplexes... Hope this helps. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Cwi Jeret Sent: Wednesday, May 16, 2007 04:25 To: IBM-MAIN@BAMA.UA.EDU Subject: Shared ICP between 2 SYSPLEXES Hello, I have the following question : We have the following configuration : 2 CPC's , on each one 2 LPARS, one CF and One MEMBER of SYSPLEX1. both CF's are connected to the members of the sysplex of the other CPC with a pair of ICP connections . CPC1 CPC2 ++ ++ || icp || | PLEX1a |--+ +---| PLEX1b | || | | || || | | || ++ | | ++ || +--|---|| | CF1 |-+ icp | CF2 | ++ ++ || || || || || || || || ++ ++ || || || || ++ ++ My question is : Is it possible to add a second SYSPLEX, sharing the same physical ICP connections like sharing CTC connections between LPARs , like this: CPC1 CPC2 ++ ++ || icp || | PLEX1a |--+ +---| PLEX1b | || | | || || | | || ++ | | ++ || +--|---|| | CF1 |-+ icp | CF2 | ++ ++ || || | PLEX2a | | PLEX2b | || || || || ++ ++ || || | CF3 | | CF4 | ++ ++ If the answer is positive, where can I find documentation describing the definitions for it . Cwi jeret, Bank Hapoalim T.A. _ Paolo Cacciari Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA Via Darwin 85, 20019 Settimo Milanese(MI) – Italy - MISET001 The goal is to be prepared for a disaster not to continually plan for a successful test * [EMAIL PROTECTED] ( + 39 051 41.36799 Mobile: + 39 335 6287584 7 + 39 02 596.23288 Fax BO: + 39 02 406052 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: rexx sample
Jalili, try with this site: http://www.sscmainframe.com/freeware.htm and download program ALXRWTOR. Then assemble it and make the use you need. Hope this helps. _ Paolo Cacciari Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA --- Hi all, Does anybody out there have a sample in REXX to send a message to console and get a response from operator ,something like WTOR(write to operator with reply) macro in assembly? Any help is highly appretiated. Regards, Ali -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Cascading FICON director with DASD and TAPE devices
Bruce wrote: ... snip Now I have been told it is a BAD idea to put DASD and TAPE into the local director of the cascade pair, as any link problem to the remote director will cause a fabric storm and shut down all the ports in the local director. ... snip Bruce, we currently use all our Ficon Directors in a single Fabric configuration, almost all interconnected in ISL cascading; we do connect DASDs and TAPEs in local Directors of cascade pairs without experiencing any problem or issue.. Never heard about fabric storms even in case of various errors on ISL links. Hope this helps. Regards. _ Paolo Cacciari Business Continuity and Recovery Services, IBM Global Services - South Region, EMEA Via Darwin 85, 20019 Settimo Milanese(MI) – Italy - MISET001 The goal is to be prepared for a disaster not to continually plan for a successful test * [EMAIL PROTECTED] ( + 39 051 41.36799 Mobile: + 39 335 6287584 7 + 39 02 596.23288 Fax BO: + 39 02 406052 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: XRC Device Blocking - Where is it displayed in RMF?
Joe, XRC device blocking delays are included in IOSQ time. _ Paolo Cacciari Business Continuity and Recovery Services, IBM Global Services - South Region, EMEA Via Darwin 85, 20019 Settimo Milanese(MI) – Italy - MISET001 The goal is to be prepared for a disaster not to continually plan for a successful test * [EMAIL PROTECTED] ( + 39 051 41.36799 Mobile: + 39 335 6287584 7 + 39 02 596.23288 Joe jeffries [EMAIL PROTECTED] COM To Sent by: IBM IBM-MAIN@BAMA.UA.EDU Mainframe cc Discussion List [EMAIL PROTECTED] Subject .EDU XRC Device Blocking - Where is it displayed in RMF? 10/11/2006 14.14 Please respond to IBM Mainframe Discussion List [EMAIL PROTECTED] .EDU Hi folks, Wondered if anyone could give a difinitive answer to where RMF would show delays caused by XRC device blocking. Would it be in the DISC time, or the PEND time. Or maybe somewhere else altogether. Much appreciated. JJ -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: FICON Saturation?
Joe, in FICON channel environments, if the CHANNEL has run out of resources (OE's/Credits) this is not shown in IOSQ time. This is recorded as PENDING TIME. As you certainly know, IOSQ time is time spent inside operating system in UCB queuing. During this state, WLM IOS are controlling I/O priority, and PAV can reduce IOSQ delay. In an XRC environment, high IOSQ time for primary volume may signify LONG BUSY; if LB is at LCU level, all volumes in that LCU can have long IOSQ time, even volumes with low access rate. You can have some metric about FICON utilization, analyzing PORT status for DASD subsystem in RMF. Hope this helps. _ Paolo Cacciari Business Continuity and Recovery Services, IBM Global Services - South Region, EMEA Via Darwin 85, 20019 Settimo Milanese(MI) – Italy - MISET001 The goal is to be prepared for a disaster not to continually plan for a successful test * [EMAIL PROTECTED] ( + 39 051 41.36799 Mobile: + 39 335 6287584 7 + 39 02 596.23288 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Is it possible to prevent a structure into a particular CF (Coupling Facility)?
Jan wrote: ...snip Is there a way to *prevent* that structures will be put into this 3-rd CF at DR site-2 in *NORMAL OPERATION mode*, i.e. when the whole production is running in site-1? We think it can't be accomplished with just specifying the PREFLIST, listing the preference order of CFs that one wants structures to be allocated to. * Any experience and/or good avices with this? ...snip Jan, the safest way to achieve your target is to have a D/R CFRM couple dataset, with a Policy (inside) which will put all structures in your D/R CF. In case of disaster, you can have your Sysplex restarted in this site-2 CF, simply using an empty XCF CDS and a COUPLExx member pointing to it and to the D/R CFRM CDS, explicitly addressing your D/R Policy. Obviously, I assume that your Data Centers are not involved in a Dispersed Parallel Sysplex. Hope this helps. _ Paolo Cacciari Business Continuity and Recovery Services, IBM Global Services - South Region, EMEA -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Is it possible to prevent a structure into a particular CF (Coupling Facility)?
Jan wrote: It *IS* about a GDPS config, Paolo, with the K-sys controlling system in the C/R site. Jan ...snip Jan, in this case, assuming that the only active system in the D/R site is K-sys, what I suggested is still applicable . _ Paolo Cacciari Business Continuity and Recovery Services, IBM Global Services - South Region, EMEA -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Problem copying VM volumes under z/OS
Oswaldo, Using CPVOLUME in the copy command requires the source and target volumes to be in VM format. You will need to have the target volume initialized at a VM system or use ICKDSF to initialize the target volume with a VTOC starting on track zero, record five. Hope this helps. ..snip .. I'm trying to use DFDSS under z/OS 1.4 to copy my z/VM 51 volumes and I am getting the following error message for every volume: ADR307E (001)-OPNCL(11), UNABLE TO OPEN VOLUME HI8801, 16 From message guide : 16 The VM-formatted volume does not have an OS-compatible VTOC beginning on track zero, record five. I try to format from z/OS, but without success with the copy, but when I format the output volumes under z/VM (ICKDSF CPVOLUME) its is OK. I am using the sysin : COPYTRACKS(0,0,3338,14) COPYVOLID - ADMINISTRATOR PURGE - CPVOLUME - INDDNAME(ENTRADA) - OUTDDNAME(SAIDA) Is it the only way to copy the volumes : 1) Format the volume from z/VM 2) Copy using DFDSS from z/OS or maybe I can format by z/OS ? Thanks. Oswaldo snip .. _ Paolo Cacciari Business Continuity and Recovery Services, IBM Global Services - South Region, EMEA Via Darwin 85, 20019 Settimo Milanese(MI) – Italy - MISET001 The goal is to be prepared for a disaster not to continually plan for a successful test * [EMAIL PROTECTED] ( + 39 051 41.36799 Mobile: + 39 335 6287584 7 + 39 02 596.23288 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: newbie qdasd question
- snip - when I issue the console command DS QDASD,5B00 I receive the following output: RESPONSE=MJR0 IEE459I 14.41.05 DEVSERV QDASD 452 UNIT VOLSER SCUTYPE DEVTYPE CYL SSID SCU-SERIAL DEV-SERIAL EF-CHK 5B00 $X5B00 2107921 2107900 3339 A014 0175-BNCZ1 0175-BNCZ1 RDFEAT? 1 DEVICE(S) MET THE SELECTION CRITERIA 1 DEVICE(S) FAILED EXTENDED FUNCTION CHECKING Can you please explain me what 'RDEFEAT?' does mean? - snip - The RDFEAT means that there is a mismatch between the hardware and software with regard to the features the device has. The HCD could be the issue here. As my co-worker indicated there is an apar fixing a problem but this is with devices other then IBM´s. Please see OW49355 for more information on the RDFEAT setting. You can try using the Validate parameter withe the Devserv command to reset the setting. HTH _ Paolo Cacciari Business Continuity and Recovery Services, IBM Global Services - South Region, EMEA Via Darwin 85, 20019 Settimo Milanese(MI) – Italy - MISET001 The goal is to be prepared for a disaster not to continually plan for a successful test * [EMAIL PROTECTED] ( + 39 051 41.36799 Mobile: + 39 335 6287584 7 + 39 02 596.23288 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: CF usage at DR location
Pat, believe me or not... there's no way to restart a Parallel Sysplex on a D/R site and with a one shot IPL operation, unless you have an empty XCF Couple Dataset and a COUPLExx parameter for D/R purposes. XCF couple datasets have an administrative section, generally not accessible by customer code, where infos about active sysplex are recorded and used in further restarts... To restart a parallel sysplex in a different location and with differents CF (in one step) you must have an XCF couple dataset clean and manually point (via PARMLIB) to your desired CFRM Policy (your loved one... with all CF specified)... As per CICS LOGR files, the only way is to have logstreams DASDONLY HTH ...snip ... I am not under a GDPS environment, only PPRC to our hotsite. All Peering will be broken when as DR scenario comes in to play. I want to have my policies available at the initial IPL of the DR system and take off where we had our primary system fail. I was hoping not to maintain multiple policies and if I come up with a clean COUPLE environment, how does it deal with CICS recovery where LOGR files were in use? I figured if I could understand a method to keep the COUPLE datasets intct from the priary site I would not have to do anything unusual at the DR location. ...snip ... _ Paolo Cacciari Business Continuity and Recovery Services, IBM Global Services - South Region, EMEA Via Darwin 85, 20019 Settimo Milanese(MI) – Italy - MISET001 The goal is to be prepared for a disaster not to continually plan for a successful test * [EMAIL PROTECTED] ( + 39 051 41.36799 Mobile: + 39 335 6287584 7 + 39 02 596.23288 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: CF usage at DR location
Patrich, that can work provided thet you have defined and initialized a new XCF couple dataset and a DR copy of your COUPLExx member of PARMLIB, pointing to this XCF CDS and containing the CFRMPOL parameter, related to the CDRM policy name you want to start at the DR site. In this case, your policy can contain both primary and DR CFs. Hope this helps snip We are in the process of setting up a new Disaster Recovery scenario using PPRC DASD and a Hot Stand-by datacenter (z9 CBU processor) I have a question concerning how others have dealt with using a Coupling Facility in this scenario. At our DR site we will have one ICF configured on the same processor our z/OS image will run on no problem so far. We would like to not maintain multiple CF policies, all Structures at our primary location will need to be created at the Disaster site. If the COUPLE Datasets are Mirrored, how can I IPL the DR machine when the CFs will be different? Can I code a CF policy that has the DR CF defined as a non-preferred CF during normal processing and when a DR is called, will the Mirrored z/OS IPL and fail trying to use the primary CF and failover to the DR CF? Policy example: CF NAME(CF01) normal CF .. .. DUMPSPACE(2000) CF NAME(CF02) = normal CF .. .. DUMPSPACE(2000) CF NAME(CFCBU) == DR CF .. .. DUMPSPACE(2000) STRUCTURE NAME(OPERLOG_STRUCT) PREFLIST(CF01,CF02,CFCBU) Would this work if CF01 and CF02 are the normal CFs in use and CFCBU CF would only be used if IPL'd at he DR location? I rambled a bit, just couldn't figure a way to explain this easily. _ Paolo Cacciari Business Continuity and Recovery Services, IBM Global Services - South Region, EMEA Via Darwin 85, 20019 Settimo Milanese(MI) – Italy - MISET001 The goal is to be prepared for a disaster not to continually plan for a successful test * [EMAIL PROTECTED] ( + 39 051 41.36799 Mobile: + 39 335 6287584 7 + 39 02 596.23288 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: CF usage at DR location
Pat, as I wrote, you actually CAN mantain your CFRM couple datasets, with your policy, provided that your policy comprises both primary and DR CF; what you need to have for DR purposes only, is an empty and initialized XCF COUPLE dataset (easy to do once and to forget) and a PARMLIB COUPLExx member, to be used in DR situations. ...snip ... I was hoping to use the existing COUPLE dataset and the existing policy. Since these datasets will be PPRC mirrored I was hoping to find a way to not maintain 2 separate policy definitions so that the day-to-day policy definitions would be automatically used at the DR location. ...snip ... _ Paolo Cacciari Business Continuity and Recovery Services, IBM Global Services - South Region, EMEA Via Darwin 85, 20019 Settimo Milanese(MI) – Italy - MISET001 The goal is to be prepared for a disaster not to continually plan for a successful test * [EMAIL PROTECTED] ( + 39 051 41.36799 Mobile: + 39 335 6287584 7 + 39 02 596.23288 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html