RE: Looking for some new projects.

2021-02-23 Thread Michael Kratky


Anthony,
I'm the polar opposite of you other than demonstrating once in Provo Utah and 
Mesa Arizona I'm exclusively in the Northeast with a stint in Richmond VA and 
Tampa Florida a few years back; strictly a hobbyist turner now as in reality 
there's no money in it after 50 years in denial not to mention all those 
widgets, gadgets, exotic wood, and technical equipment they keep dangling in 
front of us that will keep you in the poor house. Being in Code Enforcement I 
do enjoy seeing a construction project coming out of the ground to the finish 
especially some of the high end ones where money is no object like the one I 
signed off recently for the actor Tom Hanks.


Michael Kratky
Electrical Fire Underwriter Inspector and Consultant 
Commonwealth Electrical Inspection Services, Inc 
NY State Greater Capital District-Adirondack Regions
119 Riverview Road
Northville,NY 12134
theinspect...@roadrunner.com
(518) 863-8800 ofc
(518) 207-7247 mobile






-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of anthony
Sent: Monday, February 22, 2021 4:12 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

I live in Overland Park, KS.  It is a part of the Kansas City Metropolitan area.
I taught at the Local Woodcraft for a long while, but they aren't doing much 
now.  We do some classes at the local turning club. 
http://kcwoodturners.org/  Just did a beginning spindle class, and will soon 
start a beginning bowl class.
I have never done any stuff In New York.

I demonstrated in Florida a couple of times and a small one in Richmond or one 
of the Carolinas - you get over there on the other side of the Mississippi, and 
it all kind of blurs together.

Zoom is nice, but I much prefer physical presence when I demonstrate or watch.
The Instant Galleries are also better in person.

Since humans quit looking when they think or feel they KNOW the answer, and the 
answer they decide on is so rarely correct or complete, It is better to decide 
that one doesn't know and thus never quit looking.

-Original Message-
From: Michael Kratky
Sent: Monday, February 22, 2021 7:37 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for some new projects.

Anthony where are you located and teaching turning? I've been doing the same 
for the last 20 years here in upstate NY and adjacent Massachusetts, like you 
Covid has shut me down to the point that I'm losing interest and may move on to 
something else but do find zoom an interesting outcome.


Michael Kratky
Electrical Fire Underwriter Inspector and Consultant Commonwealth Electrical 
Inspection Services, Inc NY State Greater Capital District-Adirondack Regions
119 Riverview Road
Northville,  NY 12134
theinspect...@roadrunner.com
(518) 863-8800 ofc
(518) 207-7247 mobile



-Original Message-
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of anthony
Sent: Sunday, February 21, 2021 9:31 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

I teach woodturning classes.  The one I did today is local.
I traveled around some and did demos and hands on classes at clubs or symposia. 
 I use the past tense as the covid has made that difficult for the last year.  
I will probably start again as it gets better, but using Zoom may have some 
effect on that.



Since humans quit looking when they think or feel they KNOW the answer, and the 
answer they decide on is so rarely correct or complete, It is better to decide 
that one doesn't know and thus never quit looking.

-Original Message-
From: Tim Ziegler
Sent: Sunday, February 21, 2021 8:13 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.


Thanks for sharing that Anthony.
I find that very interesting and appreciate your attention to detail.

You come across as a true craftsman.
I can also tell you are passionate about your turnings.
Are you teaching woodworking classes? Just curious and you don't have to answer 
if you wish not too.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell



On Sun, Feb 21, 2021 at 5:31 PM anthony  wrote:
Here are some pictures of a cup chuck that I am using to make boxes like I 
showed images of earlier.
It must be sized correctly to the piece being held, and the inside leading edge 
has to be crisp and within a degree or two of 90.
If the chuck is correct, you can do most eliptical work in it.



Since humans quit looking when they think or feel they KNOW the answer, and the 
answer they decide on is so rarely correct or complete, It is better to decide 
that one doesn't know and 

Re: Looking for some new projects.

2021-02-23 Thread Tim Ziegler
If someone wants to get a pattern "exact" for me I could try cutting some
plastic or Acrylic gears for you.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Feb 23, 2021 at 3:30 AM  wrote:

> I don’t know of anybody in particular because I am in Australia but any
> company with a laser cutter can. And legacy them selves sell some gears I
> am told you would have to ring and ask.
>
> Now if your really desperate and own a scroll saw and have lot and lots of
> patience you can cut your own out of mild steel plate I did.
>
> Bill
>
> -Original Message-
> From: legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> On Behalf Of anthony
> Sent: Tuesday, 23 February 2021 8:35 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
> I am not certain what kind of bits to use.  It looks like a roman ogee and
> a round over bit to me, but I am not confident.  I made most of one by
> hand, the beads are not yet well formed enough, but I am not excited about
> doing it again.  It hurts.
> Did you say that there is someone who can make gears?
>
> __
> In the realm of ideas it is better to let the mind sally forth, even if
> some precious preconceptions suffer a mauling.
> -- Robert F. Goheen
>
> .__
>
> -Original Message-
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Sunday, February 21, 2021 1:17 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
>
> NIce are  you going to use a classical spiral bit now?
>
> an hour each sounds pretty good.
>
> C.A.G.
>
> On Sunday, February 21, 2021, 02:07:23 PM EST, anthony <
> acmepi...@gmail.com>
> wrote:
>
>
> The turning is long since done.  Took me about an hour each.
> I am getting ready to go teach a class.
> Talk again this evening.
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> ________
> -----Original Message-
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Sunday, February 21, 2021 8:19 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
>
> https://www.magnate.net/SearchResults.asp?Cat=230192
> this router bit would give you the cut you are looking for. ( A rope with
> the two flats.)
> If I had to guess I would say a 1" or larger (what ever the dia. of the
> spindle is what I would use.)
>
> If I were going to make these, I would use both the lathe and the Legacy.
> On your spindle you have only three types of cuts, The Roughing cut. and
> then two final cuts.
> The Transition cuts around the squares will be hardest trickiest part.
> this could be done in a number of ways.
>
> A very small beading bit (most likely a 1/8") for the transitions cuts by
> the squares.(I would do this on my lathe. but there are other ways to make
> this cut.) (even a hack saw blade could work on this cut, after a light cut
> form the 1/8" beading bit's cut to deepen the cut...?)
> The bead/ball on the top looks like it uses the same as the rope, If so the
> classical plunge router bit could do everything else.
>
> ONE other note. Just so we are talking the same, a Pitch is . How far the
> spindle moves for one full rotation. It really dose not matter where you
> measure your cut form.
> I think I 3" pitch would work just as well as a 2 1/2". By eye it would be
> pretty hard to tell the difference as long as everything is the same.
> (uniformity is the key!)
> I hope this helps you out?
> Please let me know what you think?
>
> Have a good day.
>
> C.A.G.
>
> On Sunday, February 21, 2021, 03:18:57 AM EST, 
> wrote:
>
>
> If that is a 2 start spiral then the pitch is measured from the center of
> the spiral to 2 twists down see the pic dark arrow. Are the flats your
> referring too were the yellow arrow is pointing in the pic. If so they
> would
> be done after you mill the barley with a planning bit of the appropriate
> width using the same pitch as the barley.as for other gears you may need
> you
> will have to find a laser cutting person to make them for you anyone here
> with a with a legacy 1000 could give you the sizes to give the laser
&g

Re: Looking for some new projects.

2021-02-23 Thread Tim Ziegler
Gotcha, He usually represented "Fine WoodWorking"
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Feb 22, 2021 at 11:29 PM anthony  wrote:

>
> I have never spoken with him, but if he is at the traveling Tool Shows, I
> have probably seen him.
> I think those shows have really gone down hill in the last ten years.  The
> last few years I go to them just because the local club has a presence.
>
>
> 
>
> All are lunatics, but he who can analyze his delusions is called a
> philosopher.
> Ambrose Bierce
> 
> -Original Message-
> From: Tim Ziegler
> Sent: Sunday, February 21, 2021 8:42 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
> Hey on another note do you happen to know or have you ever met Rollie
> Johnson, contributing Editor to "Fine Woodworking"?
> He travels and does a lot of teaching and training. He actually lives out
> about 45 minutes from me here in Minnesota.
>
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
>
> On Sun, Feb 21, 2021 at 8:34 PM anthony  wrote:
> I teach woodturning classes.  The one I did today is local.
> I traveled around some and did demos and hands on classes at clubs or
> symposia.  I use the past tense as the covid has made that difficult for
> the
> last year.  I will probably start again as it gets better, but using Zoom
> may have some effect on that.
>
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> ________
> -Original Message-
> From: Tim Ziegler
> Sent: Sunday, February 21, 2021 8:13 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
> Thanks for sharing that Anthony.
> I find that very interesting and appreciate your attention
> to detail.
>
> You come across as a true craftsman.
> I can also tell you are passionate about your turnings.
> Are you teaching woodworking classes? Just curious and
> you don't have to answer if you wish not too.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
>
> On Sun, Feb 21, 2021 at 5:31 PM anthony  wrote:
> Here are some pictures of a cup chuck that I am using to make boxes like I
> showed images of earlier.
> It must be sized correctly to the piece being held, and the inside leading
> edge has to be crisp and within a degree or two of 90.
> If the chuck is correct, you can do most eliptical work in it.
>
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
> -Original Message-
> From: Tim Ziegler
> Sent: Saturday, February 20, 2021 8:31 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
> Hey Anthony,
>
> Any time you reference something like this chuck your talking about can you
> download a pix or two?
> Just be curious to see some of these items. Possibly others would be
> interested too?
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
>
> On Sat, Feb 20, 2021 at 11:22 AM anthony  wrote:
> A cup chuck.  The important part of the cup chuck is shaped like the inside
> of a coffee cup with the rim being very crisp and of a diameter just
> slightly smaller than the major diameter of the sphere and friction holds
> the sphere in place while you work it.  The sphere can be placed in the cup
> chuck at any orientation to permit access to its entire surface.  To make
> the box, all of the work on the sphere is done in the cup chuck except the
> initial step of turning the stock from square to approximate sphere.
> The internal box, that piece that comes out of the sphere, is turned mostly
> in a regular four-jawed chuck with one step done in a jam chuck.
>
> anthony
>
> ____________
> Since humans quit l

Re: Looking for some new projects.

2021-02-23 Thread Tim Ziegler
Andy you can get gears straight from Legacy. Then you got everything exact.
Others will chime in here too. I just bought my sets about 2 years ago. Ask
for Cindy
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Feb 22, 2021 at 11:29 PM anthony  wrote:

> I am not certain what kind of bits to use.  It looks like a roman ogee and
> a
> round over bit to me, but I am not confident.  I made most of one by hand,
> the beads are not yet well formed enough, but I am not excited about doing
> it again.  It hurts.
> Did you say that there is someone who can make gears?
>
> __
> In the realm of ideas it is better to let the mind sally forth, even if
> some
> precious preconceptions suffer a mauling.
> -- Robert F. Goheen
>
> .__
>
> -Original Message-
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Sunday, February 21, 2021 1:17 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
>
> NIce are  you going to use a classical spiral bit now?
>
> an hour each sounds pretty good.
>
> C.A.G.
>
> On Sunday, February 21, 2021, 02:07:23 PM EST, anthony <
> acmepi...@gmail.com>
> wrote:
>
>
> The turning is long since done.  Took me about an hour each.
> I am getting ready to go teach a class.
> Talk again this evening.
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
> -Original Message-
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Sunday, February 21, 2021 8:19 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
>
> https://www.magnate.net/SearchResults.asp?Cat=230192
> this router bit would give you the cut you are looking for. ( A rope with
> the two flats.)
> If I had to guess I would say a 1" or larger (what ever the dia. of the
> spindle is what I would use.)
>
> If I were going to make these, I would use both the lathe and the Legacy.
> On your spindle you have only three types of cuts, The Roughing cut. and
> then two final cuts.
> The Transition cuts around the squares will be hardest trickiest part.
> this could be done in a number of ways.
>
> A very small beading bit (most likely a 1/8") for the transitions cuts by
> the squares.(I would do this on my lathe. but there are other ways to make
> this cut.) (even a hack saw blade could work on this cut, after a light cut
> form the 1/8" beading bit's cut to deepen the cut...?)
> The bead/ball on the top looks like it uses the same as the rope, If so the
> classical plunge router bit could do everything else.
>
> ONE other note. Just so we are talking the same, a Pitch is . How far the
> spindle moves for one full rotation. It really dose not matter where you
> measure your cut form.
> I think I 3" pitch would work just as well as a 2 1/2". By eye it would be
> pretty hard to tell the difference as long as everything is the same.
> (uniformity is the key!)
> I hope this helps you out?
> Please let me know what you think?
>
> Have a good day.
>
> C.A.G.
>
> On Sunday, February 21, 2021, 03:18:57 AM EST, 
> wrote:
>
>
> If that is a 2 start spiral then the pitch is measured from the center of
> the spiral to 2 twists down see the pic dark arrow. Are the flats your
> referring too were the yellow arrow is pointing in the pic. If so they
> would
> be done after you mill the barley with a planning bit of the appropriate
> width using the same pitch as the barley.as for other gears you may need
> you
> will have to find a laser cutting person to make them for you anyone here
> with a with a legacy 1000 could give you the sizes to give the laser
> cutter.i hope that is what your asking
> Bill
>
>
> -Original Message-
> From: legacy-ornamental-mills@googlegroups.com
>  On Behalf Of anthony
> Sent: Sunday, 21 February 2021 4:44 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
> This is the original message with the question in it.
> attached is the image of the sample balusters.
>
> I am reproducing five balusters that have a double-start barley twist.  A
> normal double-start twist, I would usually make by hand.  These balusters
> have four flats that paralle

RE: Looking for some new projects.

2021-02-23 Thread bulkeley
I don’t know of anybody in particular because I am in Australia but any company 
with a laser cutter can. And legacy them selves sell some gears I am told you 
would have to ring and ask.

Now if your really desperate and own a scroll saw and have lot and lots of 
patience you can cut your own out of mild steel plate I did.

Bill

-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of anthony
Sent: Tuesday, 23 February 2021 8:35 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

I am not certain what kind of bits to use.  It looks like a roman ogee and a 
round over bit to me, but I am not confident.  I made most of one by hand, the 
beads are not yet well formed enough, but I am not excited about doing it 
again.  It hurts.
Did you say that there is someone who can make gears?

__
In the realm of ideas it is better to let the mind sally forth, even if some 
precious preconceptions suffer a mauling.
-- Robert F. Goheen
.__

-Original Message-
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sunday, February 21, 2021 1:17 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



NIce are  you going to use a classical spiral bit now?

an hour each sounds pretty good.

C.A.G.

On Sunday, February 21, 2021, 02:07:23 PM EST, anthony  
wrote:


The turning is long since done.  Took me about an hour each.
I am getting ready to go teach a class.
Talk again this evening.


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sunday, February 21, 2021 8:19 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



https://www.magnate.net/SearchResults.asp?Cat=230192
this router bit would give you the cut you are looking for. ( A rope with
the two flats.)
If I had to guess I would say a 1" or larger (what ever the dia. of the
spindle is what I would use.)

If I were going to make these, I would use both the lathe and the Legacy.
On your spindle you have only three types of cuts, The Roughing cut. and
then two final cuts.
The Transition cuts around the squares will be hardest trickiest part.
this could be done in a number of ways.

A very small beading bit (most likely a 1/8") for the transitions cuts by
the squares.(I would do this on my lathe. but there are other ways to make
this cut.) (even a hack saw blade could work on this cut, after a light cut
form the 1/8" beading bit's cut to deepen the cut...?)
The bead/ball on the top looks like it uses the same as the rope, If so the
classical plunge router bit could do everything else.

ONE other note. Just so we are talking the same, a Pitch is . How far the
spindle moves for one full rotation. It really dose not matter where you
measure your cut form.
I think I 3" pitch would work just as well as a 2 1/2". By eye it would be
pretty hard to tell the difference as long as everything is the same.
(uniformity is the key!)
I hope this helps you out?
Please let me know what you think?

Have a good day.

C.A.G.

On Sunday, February 21, 2021, 03:18:57 AM EST, 
wrote:


If that is a 2 start spiral then the pitch is measured from the center of
the spiral to 2 twists down see the pic dark arrow. Are the flats your
referring too were the yellow arrow is pointing in the pic. If so they would
be done after you mill the barley with a planning bit of the appropriate
width using the same pitch as the barley.as for other gears you may need you
will have to find a laser cutting person to make them for you anyone here
with a with a legacy 1000 could give you the sizes to give the laser
cutter.i hope that is what your asking
Bill


-Original Message-
From: legacy-ornamental-mills@googlegroups.com
 On Behalf Of anthony
Sent: Sunday, 21 February 2021 4:44 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

This is the original message with the question in it.
attached is the image of the sample balusters.

I am reproducing five balusters that have a double-start barley twist.  A
normal double-start twist, I would usually make by hand.  These balusters
have four flats that parallel as a transition between each bead and cove
along the twist.  These make it very difficult to work by hand.

I have gained access to a legacy 1000 mill.  Unfortunately, the travel of
the twist is 2.25 inches.  That means that I either need a 2.25 or 9 gear;
the latter could be used with the .25 reduction gear.  Unfortunately, the
normal gear sets 

Re: Looking for some new projects.

2021-02-22 Thread 'Curt George' via Legacy Ornamental Mills
 Anthony. I showed you the bit. Magnate 
https://www.magnate.net/SearchResults.asp?Cat=230192 will cut the rope with two 
flats on each side of the bead.

| 
PRINT CATALOGS

LEGACY® SHOP NOTES

VIDEO CLIPS

NEWS

LINKS

ORDER INFORMATION

CUSTOM TOOLS

SHARPENING




 | 
| 
| Home > Legacy Woodworking > Router Bits For Ornamental Milling > Classic 
Plunge Cutting Router Bit 2-Flute Carbide TippedWe found 5 results matching 
your criteria. |

 |
|               Find by Pricing              Below 21 (1)               |
|  |
|  |


| 
|  |
| 
| 
2-Flute Carbide Tipped
For decorative edge grooving on cabinet faces and for picture and mirror 
frames. |

 |


| 
| 
|  | Sort By:                                Price: Low to High  Price: High to 
Low  Most Popular  Title  Manufacturer  Newest  Oldest  Availability   |  |  |  
|  |

 |   100 per page  200 per page  400 per page   Page  of 1 |
|  |


|  |

 |


| 
| 
|  |  |  |  |  |
| Magnate 3931 Classic Plunge Cutting Router Bit - 3/32" Radius; 1/2" Cutting 
Diameter; 1/4" Shank Diameter; 3/8" Cutting Height; 1-1/4" Shank Length 
 |  | 
Our Price: $18.17 |  | Qty  | Add  |
|
|
|  |
|  |
|  |  |  |  |  |
| Magnate 3932 Classic Plunge Cutting Router Bit - 5/32" Radius; 3/4" Cutting 
Diameter; 1/4" Shank Diameter; 1/2" Cutting Height; 1-1/4" Shank Length 
 |  | 
Our Price: $21.05 |  | Qty  | Add  |
|
|
|  |
|  |
|  |  |  |  |  |
| Magnate 3933 Classic Plunge Cutting Router Bit - 5/32" Radius; 3/4" Cutting 
Diameter; 1/2" Shank Diameter; 1/2" Cutting Height; 1-1/2" Shank Length 
 |  | 
Our Price: $21.65 |  | Qty  | Add  |
|
|
|  |
|  |
|  |  |  |  |  |
| Magnate 3934 Classic Plunge Cutting Router Bit - 15/64" Radius; 1" Cutting 
Diameter; 1/2" Shank Diameter; 5/8" Cutting Height; 1-1/2" Shank Length 
 |  | 
Our Price: $27.23 |  | Qty  | Add  |
|
|
|  |
|  |
|  |  |  |  |  |
| Magnate 3935 Classic Plunge Cutting Router Bit - 3/8" Radius; 1-1/2" Cutting 
Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length  |

 |

 |

 |

 |


C.A.G.
On Tuesday, February 23, 2021, 12:29:38 AM EST, anthony 
 wrote:  
 
 I am not certain what kind of bits to use.  It looks like a roman ogee and a 
round over bit to me, but I am not confident.  I made most of one by hand, 
the beads are not yet well formed enough, but I am not excited about doing 
it again.  It hurts.
Did you say that there is someone who can make gears?

__
In the realm of ideas it is better to let the mind sally forth, even if some 
precious preconceptions suffer a mauling.
-- Robert F. Goheen
.__

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sunday, February 21, 2021 1:17 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



NIce are  you going to use a classical spiral bit now?

an hour each sounds pretty good.

C.A.G.

On Sunday, February 21, 2021, 02:07:23 PM EST, anthony  
wrote:


The turning is long since done.  Took me about an hour each.
I am getting ready to go teach a class.
Talk again this evening.


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sunday, February 21, 2021 8:19 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



https://www.magnate.net/SearchResults.asp?Cat=230192
this router bit would give you the cut you are looking for. ( A rope with
the two flats.)
If I had to guess I would say a 1" or larger (what ever the dia. of the
spindle is what I would use.)

If I were going to make these, I would use both the lathe and the Legacy.
On your spindle you have only three types of cuts, The Roughing cut. and
then two final cuts.
The Transition cuts around the squares will be hardest trickiest part.
this could be done in a number of ways.

A very small beading bit (most likely a 1/8") for the transitions cuts by
the squares.(I would do this on my lathe. but there are other ways to make
this cut.) (even a hack saw blade could work on this cut, after a light cut
form the 1/8" beading bit's cut to deepen the cut...?)
The bead/ball on the top looks like it uses the same as the rope, If so the
classical plunge router bit could do everything else.

ONE other note. Just so we are talking the same, a Pitch is . How far the
spindle moves for one full rotation. It really dose not matter where you
measure your cut form.
I think I 3" pitch would work just as well as a 2 1/2". 

Re: Looking for some new projects.

2021-02-22 Thread anthony
I live in Overland Park, KS.  It is a part of the Kansas City Metropolitan 
area.
I taught at the Local Woodcraft for a long while, but they aren't doing much 
now.  We do some classes at the local turning club. 
http://kcwoodturners.org/  Just did a beginning spindle class, and will soon 
start a beginning bowl class.

I have never done any stuff In New York.

I demonstrated in Florida a couple of times and a small one in Richmond or 
one of the Carolinas - you get over there on the other side of the 
Mississippi, and it all kind of blurs together.


Zoom is nice, but I much prefer physical presence when I demonstrate or 
watch.

The Instant Galleries are also better in person.

Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: Michael Kratky

Sent: Monday, February 22, 2021 7:37 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for some new projects.

Anthony where are you located and teaching turning? I've been doing the same 
for the last 20 years here in upstate NY and adjacent Massachusetts, like 
you Covid has shut me down to the point that I'm losing interest and may 
move on to something else but do find zoom an interesting outcome.



Michael Kratky
Electrical Fire Underwriter Inspector and Consultant
Commonwealth Electrical Inspection Services, Inc
NY State Greater Capital District-Adirondack Regions
119 Riverview Road
Northville,  NY 12134
theinspect...@roadrunner.com
(518) 863-8800 ofc
(518) 207-7247 mobile



-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of anthony

Sent: Sunday, February 21, 2021 9:31 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

I teach woodturning classes.  The one I did today is local.
I traveled around some and did demos and hands on classes at clubs or 
symposia.  I use the past tense as the covid has made that difficult for the 
last year.  I will probably start again as it gets better, but using Zoom 
may have some effect on that.




Since humans quit looking when they think or feel they KNOW the answer, and 
the answer they decide on is so rarely correct or complete, It is better to 
decide that one doesn't know and thus never quit looking.


-Original Message-
From: Tim Ziegler
Sent: Sunday, February 21, 2021 8:13 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.


Thanks for sharing that Anthony.
I find that very interesting and appreciate your attention
to detail.

You come across as a true craftsman.
I can also tell you are passionate about your turnings.
Are you teaching woodworking classes? Just curious and
you don't have to answer if you wish not too.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell



On Sun, Feb 21, 2021 at 5:31 PM anthony  wrote:
Here are some pictures of a cup chuck that I am using to make boxes like I
showed images of earlier.
It must be sized correctly to the piece being held, and the inside leading
edge has to be crisp and within a degree or two of 90.
If the chuck is correct, you can do most eliptical work in it.



Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: Tim Ziegler

Sent: Saturday, February 20, 2021 8:31 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.


Hey Anthony,

Any time you reference something like this chuck your talking about can you
download a pix or two?
Just be curious to see some of these items. Possibly others would be
interested too?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell



On Sat, Feb 20, 2021 at 11:22 AM anthony  wrote:
A cup chuck.  The important part of the cup chuck is shaped like the inside
of a coffee cup with the rim being very crisp and of a diameter just
slightly smaller than the major diameter of the sphere and friction holds
the sphere in place while you work it.  The sphere can be placed in the cup
chuck at any orientation to permit access to its entire surface.  To make
the box, all of the work on the sphere is done in the cup chuck except the
initial step of turning the stock from square to approximate sphere.
The internal box, that piece that comes out of the sphere, is turned mostly
in a regular four-jaw

Re: Looking for some new projects.

2021-02-22 Thread anthony
I am not certain what kind of bits to use.  It looks like a roman ogee and a 
round over bit to me, but I am not confident.  I made most of one by hand, 
the beads are not yet well formed enough, but I am not excited about doing 
it again.  It hurts.

Did you say that there is someone who can make gears?

__
In the realm of ideas it is better to let the mind sally forth, even if some 
precious preconceptions suffer a mauling.

-- Robert F. Goheen
.__

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills

Sent: Sunday, February 21, 2021 1:17 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



NIce are  you going to use a classical spiral bit now?

an hour each sounds pretty good.

C.A.G.

On Sunday, February 21, 2021, 02:07:23 PM EST, anthony  
wrote:



The turning is long since done.  Took me about an hour each.
I am getting ready to go teach a class.
Talk again this evening.


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills

Sent: Sunday, February 21, 2021 8:19 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



https://www.magnate.net/SearchResults.asp?Cat=230192
this router bit would give you the cut you are looking for. ( A rope with
the two flats.)
If I had to guess I would say a 1" or larger (what ever the dia. of the
spindle is what I would use.)

If I were going to make these, I would use both the lathe and the Legacy.
On your spindle you have only three types of cuts, The Roughing cut. and
then two final cuts.
The Transition cuts around the squares will be hardest trickiest part.
this could be done in a number of ways.

A very small beading bit (most likely a 1/8") for the transitions cuts by
the squares.(I would do this on my lathe. but there are other ways to make
this cut.) (even a hack saw blade could work on this cut, after a light cut
form the 1/8" beading bit's cut to deepen the cut...?)
The bead/ball on the top looks like it uses the same as the rope, If so the
classical plunge router bit could do everything else.

ONE other note. Just so we are talking the same, a Pitch is . How far the
spindle moves for one full rotation. It really dose not matter where you
measure your cut form.
I think I 3" pitch would work just as well as a 2 1/2". By eye it would be
pretty hard to tell the difference as long as everything is the same.
(uniformity is the key!)
I hope this helps you out?
Please let me know what you think?

Have a good day.

C.A.G.

On Sunday, February 21, 2021, 03:18:57 AM EST, 
wrote:


If that is a 2 start spiral then the pitch is measured from the center of
the spiral to 2 twists down see the pic dark arrow. Are the flats your
referring too were the yellow arrow is pointing in the pic. If so they would
be done after you mill the barley with a planning bit of the appropriate
width using the same pitch as the barley.as for other gears you may need you
will have to find a laser cutting person to make them for you anyone here
with a with a legacy 1000 could give you the sizes to give the laser
cutter.i hope that is what your asking
Bill


-Original Message-
From: legacy-ornamental-mills@googlegroups.com
 On Behalf Of anthony
Sent: Sunday, 21 February 2021 4:44 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

This is the original message with the question in it.
attached is the image of the sample balusters.

I am reproducing five balusters that have a double-start barley twist.  A
normal double-start twist, I would usually make by hand.  These balusters
have four flats that parallel as a transition between each bead and cove
along the twist.  These make it very difficult to work by hand.

I have gained access to a legacy 1000 mill.  Unfortunately, the travel of
the twist is 2.25 inches.  That means that I either need a 2.25 or 9 gear;
the latter could be used with the .25 reduction gear.  Unfortunately, the
normal gear sets don't include either gear.  Not only have I never used a
legacy mill, but I know little about making gears or working metal.




Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: bulke...@mmnet.com.au

Sent: Saturday, February 20, 2021 3:02 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Look

Re: Looking for some new projects.

2021-02-22 Thread anthony



I have never spoken with him, but if he is at the traveling Tool Shows, I 
have probably seen him.
I think those shows have really gone down hill in the last ten years.  The 
last few years I go to them just because the local club has a presence.





All are lunatics, but he who can analyze his delusions is called a 
philosopher.

Ambrose Bierce

-Original Message- 
From: Tim Ziegler

Sent: Sunday, February 21, 2021 8:42 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.


Hey on another note do you happen to know or have you ever met Rollie 
Johnson, contributing Editor to "Fine Woodworking"?
He travels and does a lot of teaching and training. He actually lives out 
about 45 minutes from me here in Minnesota.



Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell



On Sun, Feb 21, 2021 at 8:34 PM anthony  wrote:
I teach woodturning classes.  The one I did today is local.
I traveled around some and did demos and hands on classes at clubs or
symposia.  I use the past tense as the covid has made that difficult for the
last year.  I will probably start again as it gets better, but using Zoom
may have some effect on that.



Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: Tim Ziegler

Sent: Sunday, February 21, 2021 8:13 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.


Thanks for sharing that Anthony.
I find that very interesting and appreciate your attention
to detail.

You come across as a true craftsman.
I can also tell you are passionate about your turnings.
Are you teaching woodworking classes? Just curious and
you don't have to answer if you wish not too.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell



On Sun, Feb 21, 2021 at 5:31 PM anthony  wrote:
Here are some pictures of a cup chuck that I am using to make boxes like I
showed images of earlier.
It must be sized correctly to the piece being held, and the inside leading
edge has to be crisp and within a degree or two of 90.
If the chuck is correct, you can do most eliptical work in it.



Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: Tim Ziegler

Sent: Saturday, February 20, 2021 8:31 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.


Hey Anthony,

Any time you reference something like this chuck your talking about can you
download a pix or two?
Just be curious to see some of these items. Possibly others would be
interested too?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell



On Sat, Feb 20, 2021 at 11:22 AM anthony  wrote:
A cup chuck.  The important part of the cup chuck is shaped like the inside
of a coffee cup with the rim being very crisp and of a diameter just
slightly smaller than the major diameter of the sphere and friction holds
the sphere in place while you work it.  The sphere can be placed in the cup
chuck at any orientation to permit access to its entire surface.  To make
the box, all of the work on the sphere is done in the cup chuck except the
initial step of turning the stock from square to approximate sphere.
The internal box, that piece that comes out of the sphere, is turned mostly
in a regular four-jawed chuck with one step done in a jam chuck.

anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: Tim Ziegler

Sent: Saturday, February 20, 2021 5:47 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.


them are pretty cool. What method are you using to turn the circles on the
completed Ball type turning?


Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell



On Fri, Feb 19, 2021 at 11:51 PM anthony  wrote:
I attached an image of the barley twist and a series of photos of a style of
box I have been making lately.
One of the difficulties with the twist is that the travel may not 

RE: Looking for some new projects.

2021-02-22 Thread Michael Kratky
Anthony where are you located and teaching turning? I've been doing the same 
for the last 20 years here in upstate NY and adjacent Massachusetts, like you 
Covid has shut me down to the point that I'm losing interest and may move on to 
something else but do find zoom an interesting outcome.


Michael Kratky
Electrical Fire Underwriter Inspector and Consultant 
Commonwealth Electrical Inspection Services, Inc 
NY State Greater Capital District-Adirondack Regions
119 Riverview Road
Northville,  NY 12134
theinspect...@roadrunner.com
(518) 863-8800 ofc
(518) 207-7247 mobile



-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of anthony
Sent: Sunday, February 21, 2021 9:31 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

I teach woodturning classes.  The one I did today is local.
I traveled around some and did demos and hands on classes at clubs or symposia. 
 I use the past tense as the covid has made that difficult for the last year.  
I will probably start again as it gets better, but using Zoom may have some 
effect on that.



Since humans quit looking when they think or feel they KNOW the answer, and the 
answer they decide on is so rarely correct or complete, It is better to decide 
that one doesn't know and thus never quit looking.

-Original Message-
From: Tim Ziegler
Sent: Sunday, February 21, 2021 8:13 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.


Thanks for sharing that Anthony.
I find that very interesting and appreciate your attention
to detail.

You come across as a true craftsman.
I can also tell you are passionate about your turnings.
Are you teaching woodworking classes? Just curious and
you don't have to answer if you wish not too.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell



On Sun, Feb 21, 2021 at 5:31 PM anthony  wrote:
Here are some pictures of a cup chuck that I am using to make boxes like I
showed images of earlier.
It must be sized correctly to the piece being held, and the inside leading
edge has to be crisp and within a degree or two of 90.
If the chuck is correct, you can do most eliptical work in it.



Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: Tim Ziegler
Sent: Saturday, February 20, 2021 8:31 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.


Hey Anthony,

Any time you reference something like this chuck your talking about can you
download a pix or two?
Just be curious to see some of these items. Possibly others would be
interested too?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell



On Sat, Feb 20, 2021 at 11:22 AM anthony  wrote:
A cup chuck.  The important part of the cup chuck is shaped like the inside
of a coffee cup with the rim being very crisp and of a diameter just
slightly smaller than the major diameter of the sphere and friction holds
the sphere in place while you work it.  The sphere can be placed in the cup
chuck at any orientation to permit access to its entire surface.  To make
the box, all of the work on the sphere is done in the cup chuck except the
initial step of turning the stock from square to approximate sphere.
The internal box, that piece that comes out of the sphere, is turned mostly
in a regular four-jawed chuck with one step done in a jam chuck.

anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: Tim Ziegler
Sent: Saturday, February 20, 2021 5:47 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.


them are pretty cool. What method are you using to turn the circles on the
completed Ball type turning?


Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell



On Fri, Feb 19, 2021 at 11:51 PM anthony  wrote:
I attached an image of the barley twist and a series of photos of a style of
box I have been making lately.
One of the difficulties with the twist is that the travel may not be
constant throughout its length.  I have only the two examples, and it is
difficult to be certain what is happening.
anthony


Since humans 

RE: Looking for some new projects.

2021-02-22 Thread bulkeley
You right about that mac

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Monday, 22 February 2021 2:17 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

And Rollie is one of the "Seminar Presenters" at "The Woodworking Shows".   The 
traveling ones - that used to start the first weekend in Jan and run for about 
4 months.  That's going to start out a LOT different this year - with there 
being on-line sessions for 3 or 4 weekends starting in March(?).

Really enjoyed his sessions!

I'm curious how the "Vendors & Demonstrators" are going to do their thing.  I 
have bought something at every one of the Shows that come to my area.  In fact 
myself and others always look forward to seeing demos of "stuff" we have read 
about over the previous 12 months - and hold of on pulling the trigger on them 
until we see them demonstrated at The Show!  Hard to replace the eyeball to 
eyeball and hold in your hand experiences when it comes to buying tools!

Mac

  _  

-Original Message- 
From: Tim Ziegler 
Sent: Feb 21, 2021 9:42 PM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: Re: Looking for some new projects. 

Hey on another note do you happen to know or have you ever met Rollie Johnson, 
contributing Editor to "Fine Woodworking"?

He travels and does a lot of teaching and training. He actually lives out about 
45 minutes from me here in Minnesota. 




Kind Regards,

 

Timothy J. Ziegler


  _  


On Sun, Feb 21, 2021 at 8:34 PM anthony mailto:acmepi...@gmail.com> > wrote:

I teach woodturning classes.  The one I did today is local.
I traveled around some and did demos and hands on classes at clubs or 
symposia.  I use the past tense as the covid has made that difficult for the 
last year.  I will probably start again as it gets better, but using Zoom 
may have some effect on that.


  _  


-Original Message- 
From: Tim Ziegler
Sent: Sunday, February 21, 2021 8:13 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Looking for some new projects.

Thanks for sharing that Anthony.
I find that very interesting and appreciate your attention
to detail.

You come across as a true craftsman.
I can also tell you are passionate about your turnings.
Are you teaching woodworking classes? Just curious and
you don't have to answer if you wish not too.

Kind Regards,

Timothy J. Ziegler


  _  


On Sun, Feb 21, 2021 at 5:31 PM anthony mailto:acmepi...@gmail.com> > wrote:
Here are some pictures of a cup chuck that I am using to make boxes like I
showed images of earlier.
It must be sized correctly to the piece being held, and the inside leading
edge has to be crisp and within a degree or two of 90.
If the chuck is correct, you can do most eliptical work in it.


  _  


-Original Message- 
From: Tim Ziegler
Sent: Saturday, February 20, 2021 8:31 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Looking for some new projects.

Hey Anthony,

Any time you reference something like this chuck your talking about can you
download a pix or two?
Just be curious to see some of these items. Possibly others would be
interested too?

Kind Regards,

Timothy J. Ziegler


  _  


On Sat, Feb 20, 2021 at 11:22 AM anthony mailto:acmepi...@gmail.com> > wrote:
A cup chuck.  The important part of the cup chuck is shaped like the inside
of a coffee cup with the rim being very crisp and of a diameter just
slightly smaller than the major diameter of the sphere and friction holds
the sphere in place while you work it.  The sphere can be placed in the cup
chuck at any orientation to permit access to its entire surface.  To make
the box, all of the work on the sphere is done in the cup chuck except the
initial step of turning the stock from square to approximate sphere.
The internal box, that piece that comes out of the sphere, is turned mostly
in a regular four-jawed chuck with one step done in a jam chuck.

anthony


  _  


-Original Message- 
From: Tim Ziegler
Sent: Saturday, February 20, 2021 5:47 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Looking for some new projects.

them are pretty cool. What method are you using to turn the circles on the
completed Ball type turning?

Kind Regards,

Timothy J. Ziegler


  _  


On Fri, Feb 19, 2021 at 11:51 PM anthony mailto:acmepi...@gmail.com> > wrote:
I attached an image of the barley twist and a series of photos of a style of
box I have been making lately.
One of the difficulties with the twist is that the travel may not be
constant throughout its length.  I have only the two examples, and it is
diff

Re: Looking for some new projects.

2021-02-21 Thread Tim Ziegler
Hey Mac,

I did not realize you knew him too.
I talk to him fairly frequently as we have become pretty good friends over
the last
few years. I tap on him for advice on equipment purchases from time to time
as well.
Actually his wife worked at the same company I did as well. so pretty cool
Michael K. know's him pretty well too and has done several shows that
Rollie has been too.
Rollie also is the head of our WoodWorking group located out of the St
Cloud area.
Small world. I'll have to mention your name Mac and let him know about how
I come to
know you.
anyway have a great night. going to get some z's

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Feb 21, 2021 at 9:16 PM M.W.Foscue  wrote:

> And Rollie is one of the "Seminar Presenters" at "The Woodworking
> Shows".   The traveling ones - that used to start the first weekend in Jan
> and run for about 4 months.  That's going to start out a LOT different this
> year - with there being on-line sessions for 3 or 4 weekends starting in
> March(?).
> Really enjoyed his sessions!
> I'm curious how the "Vendors & Demonstrators" are going to do their
> thing.  I have bought something at every one of the Shows that come to my
> area.  In fact myself and others always look forward to seeing demos of
> "stuff" we have read about over the previous 12 months - and hold of on
> pulling the trigger on them until we see them demonstrated at The Show!
> Hard to replace the eyeball to eyeball and hold in your hand experiences
> when it comes to buying tools!
> Mac
> --
>
> -Original Message-
> From: Tim Ziegler
> Sent: Feb 21, 2021 9:42 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
> Hey on another note do you happen to know or have you ever met Rollie
> Johnson, contributing Editor to "Fine Woodworking"?
> He travels and does a lot of teaching and training. He actually lives out
> about 45 minutes from me here in Minnesota.
>
> Kind Regards,
>
> Timothy J. Ziegler
> --
> On Sun, Feb 21, 2021 at 8:34 PM anthony  wrote:
>
>> I teach woodturning classes.  The one I did today is local.
>> I traveled around some and did demos and hands on classes at clubs or
>> symposia.  I use the past tense as the covid has made that difficult for
>> the
>> last year.  I will probably start again as it gets better, but using Zoom
>> may have some effect on that.
>> ----------
>> -Original Message-
>> From: Tim Ziegler
>> Sent: Sunday, February 21, 2021 8:13 PM
>> To: legacy-ornamental-mills@googlegroups.com
>> Subject: Re: Looking for some new projects.
>>
>> Thanks for sharing that Anthony.
>> I find that very interesting and appreciate your attention
>> to detail.
>>
>> You come across as a true craftsman.
>> I can also tell you are passionate about your turnings.
>> Are you teaching woodworking classes? Just curious and
>> you don't have to answer if you wish not too.
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> --
>> On Sun, Feb 21, 2021 at 5:31 PM anthony  wrote:
>> Here are some pictures of a cup chuck that I am using to make boxes like I
>> showed images of earlier.
>> It must be sized correctly to the piece being held, and the inside leading
>> edge has to be crisp and within a degree or two of 90.
>> If the chuck is correct, you can do most eliptical work in it.
>> --
>> -Original Message-
>> From: Tim Ziegler
>> Sent: Saturday, February 20, 2021 8:31 PM
>> To: legacy-ornamental-mills@googlegroups.com
>> Subject: Re: Looking for some new projects.
>>
>> Hey Anthony,
>>
>> Any time you reference something like this chuck your talking about can
>> you
>> download a pix or two?
>> Just be curious to see some of these items. Possibly others would be
>> interested too?
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> --
>> On Sat, Feb 20, 2021 at 11:22 AM anthony  wrote:
>> A cup chuck.  The important part of the cup chuck is shaped like the
>> inside
>> of a coffee cup with the rim being very crisp and of a diameter just
>> slightly smaller than the major diameter of the sphere and friction holds
>> the sphere in place while you work it.  The sphere can be placed in the
>> cup
>> chuck at any orientation to permit access to its entire surface.  To 

Re: Looking for some new projects.

2021-02-21 Thread M.W.Foscue
And Rollie is one of the "Seminar Presenters" at "The Woodworking Shows".   The traveling ones - that used to start the first weekend in Jan and run for about 4 months.  That's going to start out a LOT different this year - with there being on-line sessions for 3 or 4 weekends starting in March(?).Really enjoyed his sessions!I'm curious how the "Vendors & Demonstrators" are going to do their thing.  I have bought something at every one of the Shows that come to my area.  In fact myself and others always look forward to seeing demos of "stuff" we have read about over the previous 12 months - and hold of on pulling the trigger on them until we see them demonstrated at The Show!  Hard to replace the eyeball to eyeball and hold in your hand experiences when it comes to buying tools!Mac-Original Message-
From: Tim Ziegler 
Sent: Feb 21, 2021 9:42 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

Hey on another note do you happen to know or have you ever met Rollie Johnson, contributing Editor to "Fine Woodworking"?He travels and does a lot of teaching and training. He actually lives out about 45 minutes from me here in Minnesota. Kind Regards,Timothy J. ZieglerOn Sun, Feb 21, 2021 at 8:34 PM anthony <acmepi...@gmail.com> wrote:I teach woodturning classes.  The one I did today is local.
I traveled around some and did demos and hands on classes at clubs or 
symposia.  I use the past tense as the covid has made that difficult for the 
last year.  I will probably start again as it gets better, but using Zoom 
may have some effect on that.-Original Message- 
From: Tim Ziegler
Sent: Sunday, February 21, 2021 8:13 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

Thanks for sharing that Anthony.
I find that very interesting and appreciate your attention
to detail.

You come across as a true craftsman.
I can also tell you are passionate about your turnings.
Are you teaching woodworking classes? Just curious and
you don't have to answer if you wish not too.

Kind Regards,

Timothy J. Ziegler
On Sun, Feb 21, 2021 at 5:31 PM anthony <acmepi...@gmail.com> wrote:
Here are some pictures of a cup chuck that I am using to make boxes like I
showed images of earlier.
It must be sized correctly to the piece being held, and the inside leading
edge has to be crisp and within a degree or two of 90.
If the chuck is correct, you can do most eliptical work in it.-Original Message- 
From: Tim Ziegler
Sent: Saturday, February 20, 2021 8:31 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

Hey Anthony,

Any time you reference something like this chuck your talking about can you
download a pix or two?
Just be curious to see some of these items. Possibly others would be
interested too?

Kind Regards,

Timothy J. Ziegler
On Sat, Feb 20, 2021 at 11:22 AM anthony <acmepi...@gmail.com> wrote:
A cup chuck.  The important part of the cup chuck is shaped like the inside
of a coffee cup with the rim being very crisp and of a diameter just
slightly smaller than the major diameter of the sphere and friction holds
the sphere in place while you work it.  The sphere can be placed in the cup
chuck at any orientation to permit access to its entire surface.  To make
the box, all of the work on the sphere is done in the cup chuck except the
initial step of turning the stock from square to approximate sphere.
The internal box, that piece that comes out of the sphere, is turned mostly
in a regular four-jawed chuck with one step done in a jam chuck.

anthony-Original Message- 
From: Tim Ziegler
Sent: Saturday, February 20, 2021 5:47 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

them are pretty cool. What method are you using to turn the circles on the
completed Ball type turning?

Kind Regards,

Timothy J. Ziegler
On Fri, Feb 19, 2021 at 11:51 PM anthony <acmepi...@gmail.com> wrote:
I attached an image of the barley twist and a series of photos of a style of
box I have been making lately.
One of the difficulties with the twist is that the travel may not be
constant throughout its length.  I have only the two examples, and it is
difficult to be certain what is happening.
anthony
From: 'Curt George' via Legacy Ornamental Mills
Sent: Thursday, February 18, 2021 12:42 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

Sorry I did not see your reply to the bone question.

Do not boil your bone. a hot water bath will not hurt the bone, but boiling
will weaken the bone.

Hydrant peroxide a 2-3% will remove the oil and whiten up the bone, if left
to soak in it for a week or two.

here are some pix. of some of my turnings.
C.A.G.
On Thursday, February 18, 2021, 01:19:55 AM EST, anthony
<acmepi...@gmail.com> wrote:

I bought the femur at

A

Re: Looking for some new projects.

2021-02-21 Thread Tim Ziegler
Hey on another note do you happen to know or have you ever met Rollie
Johnson, contributing Editor to "Fine Woodworking"?
He travels and does a lot of teaching and training. He actually lives out
about 45 minutes from me here in Minnesota.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Feb 21, 2021 at 8:34 PM anthony  wrote:

> I teach woodturning classes.  The one I did today is local.
> I traveled around some and did demos and hands on classes at clubs or
> symposia.  I use the past tense as the covid has made that difficult for
> the
> last year.  I will probably start again as it gets better, but using Zoom
> may have some effect on that.
>
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
> -Original Message-
> From: Tim Ziegler
> Sent: Sunday, February 21, 2021 8:13 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
> Thanks for sharing that Anthony.
> I find that very interesting and appreciate your attention
> to detail.
>
> You come across as a true craftsman.
> I can also tell you are passionate about your turnings.
> Are you teaching woodworking classes? Just curious and
> you don't have to answer if you wish not too.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
>
> On Sun, Feb 21, 2021 at 5:31 PM anthony  wrote:
> Here are some pictures of a cup chuck that I am using to make boxes like I
> showed images of earlier.
> It must be sized correctly to the piece being held, and the inside leading
> edge has to be crisp and within a degree or two of 90.
> If the chuck is correct, you can do most eliptical work in it.
>
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> ____________
> -Original Message-
> From: Tim Ziegler
> Sent: Saturday, February 20, 2021 8:31 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
> Hey Anthony,
>
> Any time you reference something like this chuck your talking about can you
> download a pix or two?
> Just be curious to see some of these items. Possibly others would be
> interested too?
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
>
> On Sat, Feb 20, 2021 at 11:22 AM anthony  wrote:
> A cup chuck.  The important part of the cup chuck is shaped like the inside
> of a coffee cup with the rim being very crisp and of a diameter just
> slightly smaller than the major diameter of the sphere and friction holds
> the sphere in place while you work it.  The sphere can be placed in the cup
> chuck at any orientation to permit access to its entire surface.  To make
> the box, all of the work on the sphere is done in the cup chuck except the
> initial step of turning the stock from square to approximate sphere.
> The internal box, that piece that comes out of the sphere, is turned mostly
> in a regular four-jawed chuck with one step done in a jam chuck.
>
> anthony
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
> -Original Message-
> From: Tim Ziegler
> Sent: Saturday, February 20, 2021 5:47 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
> them are pretty cool. What method are you using to turn the circles on the
> completed Ball type turning?
>
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
>
> On Fri, Feb 19, 2021 at 11:51 PM anthony  wrote:
> I attached an image of the barley twist and a series of photos of a style
> of
> box I have been making lately.
> One of the difficulties with the twist is 

Re: Looking for some new projects.

2021-02-21 Thread Tim Ziegler
Very cool and thanks so much for sharing. I enjoy turning but I only seem
to do what
comes as either a repair or an order so I don't spend the time I'd like on
it.
I'm very excited to continue moving forward on my Legacy's however and once
I get our kitchen cabinets completed I promised myself some play time too.
I am looking forward to more from you and anything you'd care to share is
ok by me.


Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Feb 21, 2021 at 8:34 PM anthony  wrote:

> I teach woodturning classes.  The one I did today is local.
> I traveled around some and did demos and hands on classes at clubs or
> symposia.  I use the past tense as the covid has made that difficult for
> the
> last year.  I will probably start again as it gets better, but using Zoom
> may have some effect on that.
>
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
> -Original Message-
> From: Tim Ziegler
> Sent: Sunday, February 21, 2021 8:13 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
> Thanks for sharing that Anthony.
> I find that very interesting and appreciate your attention
> to detail.
>
> You come across as a true craftsman.
> I can also tell you are passionate about your turnings.
> Are you teaching woodworking classes? Just curious and
> you don't have to answer if you wish not too.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
>
> On Sun, Feb 21, 2021 at 5:31 PM anthony  wrote:
> Here are some pictures of a cup chuck that I am using to make boxes like I
> showed images of earlier.
> It must be sized correctly to the piece being held, and the inside leading
> edge has to be crisp and within a degree or two of 90.
> If the chuck is correct, you can do most eliptical work in it.
>
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> ________
> -Original Message-
> From: Tim Ziegler
> Sent: Saturday, February 20, 2021 8:31 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
> Hey Anthony,
>
> Any time you reference something like this chuck your talking about can you
> download a pix or two?
> Just be curious to see some of these items. Possibly others would be
> interested too?
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
>
> On Sat, Feb 20, 2021 at 11:22 AM anthony  wrote:
> A cup chuck.  The important part of the cup chuck is shaped like the inside
> of a coffee cup with the rim being very crisp and of a diameter just
> slightly smaller than the major diameter of the sphere and friction holds
> the sphere in place while you work it.  The sphere can be placed in the cup
> chuck at any orientation to permit access to its entire surface.  To make
> the box, all of the work on the sphere is done in the cup chuck except the
> initial step of turning the stock from square to approximate sphere.
> The internal box, that piece that comes out of the sphere, is turned mostly
> in a regular four-jawed chuck with one step done in a jam chuck.
>
> anthony
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
> -Original Message-
> From: Tim Ziegler
> Sent: Saturday, February 20, 2021 5:47 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
> them are pretty cool. What method are you using to turn the circles on the
> completed Ball type turning?
>
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
>
> On Fri, Feb 19, 2021 at 11:51 PM anthony  wrote:
> I attached an image of the barley

Re: Looking for some new projects.

2021-02-21 Thread anthony

I teach woodturning classes.  The one I did today is local.
I traveled around some and did demos and hands on classes at clubs or 
symposia.  I use the past tense as the covid has made that difficult for the 
last year.  I will probably start again as it gets better, but using Zoom 
may have some effect on that.




Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: Tim Ziegler

Sent: Sunday, February 21, 2021 8:13 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.


Thanks for sharing that Anthony.
I find that very interesting and appreciate your attention
to detail.

You come across as a true craftsman.
I can also tell you are passionate about your turnings.
Are you teaching woodworking classes? Just curious and
you don't have to answer if you wish not too.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell



On Sun, Feb 21, 2021 at 5:31 PM anthony  wrote:
Here are some pictures of a cup chuck that I am using to make boxes like I
showed images of earlier.
It must be sized correctly to the piece being held, and the inside leading
edge has to be crisp and within a degree or two of 90.
If the chuck is correct, you can do most eliptical work in it.



Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: Tim Ziegler

Sent: Saturday, February 20, 2021 8:31 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.


Hey Anthony,

Any time you reference something like this chuck your talking about can you
download a pix or two?
Just be curious to see some of these items. Possibly others would be
interested too?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell



On Sat, Feb 20, 2021 at 11:22 AM anthony  wrote:
A cup chuck.  The important part of the cup chuck is shaped like the inside
of a coffee cup with the rim being very crisp and of a diameter just
slightly smaller than the major diameter of the sphere and friction holds
the sphere in place while you work it.  The sphere can be placed in the cup
chuck at any orientation to permit access to its entire surface.  To make
the box, all of the work on the sphere is done in the cup chuck except the
initial step of turning the stock from square to approximate sphere.
The internal box, that piece that comes out of the sphere, is turned mostly
in a regular four-jawed chuck with one step done in a jam chuck.

anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: Tim Ziegler

Sent: Saturday, February 20, 2021 5:47 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.


them are pretty cool. What method are you using to turn the circles on the
completed Ball type turning?


Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell



On Fri, Feb 19, 2021 at 11:51 PM anthony  wrote:
I attached an image of the barley twist and a series of photos of a style of
box I have been making lately.
One of the difficulties with the twist is that the travel may not be
constant throughout its length.  I have only the two examples, and it is
difficult to be certain what is happening.
anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills

Sent: Thursday, February 18, 2021 12:42 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



Sorry I did not see your reply to the bone question.

Do not boil your bone. a hot water bath will not hurt the bone, but boiling
will weaken the bone.

Hydrant peroxide a 2-3% will remove the oil and whiten up the bone, if left
to soak in it for a week or two.

here are some pix. of some of my turnings.
C.A.G.

On Thursday, February 18, 2021, 01:19:55 AM EST, anthony
 wrote:


I bought the femur at

Atlantic Cora

Re: Looking for some new projects.

2021-02-21 Thread Tim Ziegler
Thanks for sharing that Anthony.
I find that very interesting and appreciate your attention
to detail.
You come across as a true craftsman.
I can also tell you are passionate about your turnings.
Are you teaching woodworking classes? Just curious and
you don't have to answer if you wish not too.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Feb 21, 2021 at 5:31 PM anthony  wrote:

> Here are some pictures of a cup chuck that I am using to make boxes like I
> showed images of earlier.
> It must be sized correctly to the piece being held, and the inside leading
> edge has to be crisp and within a degree or two of 90.
> If the chuck is correct, you can do most eliptical work in it.
>
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
> -Original Message-
> From: Tim Ziegler
> Sent: Saturday, February 20, 2021 8:31 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
> Hey Anthony,
>
> Any time you reference something like this chuck your talking about can
> you
> download a pix or two?
> Just be curious to see some of these items. Possibly others would be
> interested too?
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
>
> On Sat, Feb 20, 2021 at 11:22 AM anthony  wrote:
> A cup chuck.  The important part of the cup chuck is shaped like the inside
> of a coffee cup with the rim being very crisp and of a diameter just
> slightly smaller than the major diameter of the sphere and friction holds
> the sphere in place while you work it.  The sphere can be placed in the cup
> chuck at any orientation to permit access to its entire surface.  To make
> the box, all of the work on the sphere is done in the cup chuck except the
> initial step of turning the stock from square to approximate sphere.
> The internal box, that piece that comes out of the sphere, is turned mostly
> in a regular four-jawed chuck with one step done in a jam chuck.
>
> anthony
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> ____________
> -Original Message-
> From: Tim Ziegler
> Sent: Saturday, February 20, 2021 5:47 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
> them are pretty cool. What method are you using to turn the circles on the
> completed Ball type turning?
>
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
>
> On Fri, Feb 19, 2021 at 11:51 PM anthony  wrote:
> I attached an image of the barley twist and a series of photos of a style
> of
> box I have been making lately.
> One of the difficulties with the twist is that the travel may not be
> constant throughout its length.  I have only the two examples, and it is
> difficult to be certain what is happening.
> anthony
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
> -Original Message-
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Thursday, February 18, 2021 12:42 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
>
> Sorry I did not see your reply to the bone question.
>
> Do not boil your bone. a hot water bath will not hurt the bone, but boiling
> will weaken the bone.
>
> Hydrant peroxide a 2-3% will remove the oil and whiten up the bone, if left
> to soak in it for a week or two.
>
> here are some pix. of some of my turnings.
> C.A.G.
>
> On Thursday, February 18, 2021, 01:19:55 AM EST, anthony
>  wrote:
>
>
> I bought the femur at
>
> Atlantic Coral Enterprise, Inc.
> 5000 Crescent Technical Court
> St. Augustine, FL 32086
> Outside FL: 1-800-624-7964
> Inside FL: 904-797-7478
>
> I have never glued bone before.  I guess that you mig

RE: Looking for some new projects.

2021-02-21 Thread bulkeley
Very nice I have seen this method before but I have never used it I used a 
donut chuck

Bill

-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of anthony
Sent: Monday, 22 February 2021 10:30 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

Here are some pictures of a cup chuck that I am using to make boxes like I 
showed images of earlier.
It must be sized correctly to the piece being held, and the inside leading edge 
has to be crisp and within a degree or two of 90.
If the chuck is correct, you can do most eliptical work in it.



Since humans quit looking when they think or feel they KNOW the answer, and the 
answer they decide on is so rarely correct or complete, It is better to decide 
that one doesn't know and thus never quit looking.

-Original Message-
From: Tim Ziegler
Sent: Saturday, February 20, 2021 8:31 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.


Hey Anthony,

Any time you reference something like this chuck your talking about can you 
download a pix or two?
Just be curious to see some of these items. Possibly others would be 
interested too?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell



On Sat, Feb 20, 2021 at 11:22 AM anthony  wrote:
A cup chuck.  The important part of the cup chuck is shaped like the inside
of a coffee cup with the rim being very crisp and of a diameter just
slightly smaller than the major diameter of the sphere and friction holds
the sphere in place while you work it.  The sphere can be placed in the cup
chuck at any orientation to permit access to its entire surface.  To make
the box, all of the work on the sphere is done in the cup chuck except the
initial step of turning the stock from square to approximate sphere.
The internal box, that piece that comes out of the sphere, is turned mostly
in a regular four-jawed chuck with one step done in a jam chuck.

anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: Tim Ziegler
Sent: Saturday, February 20, 2021 5:47 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.


them are pretty cool. What method are you using to turn the circles on the
completed Ball type turning?


Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell



On Fri, Feb 19, 2021 at 11:51 PM anthony  wrote:
I attached an image of the barley twist and a series of photos of a style of
box I have been making lately.
One of the difficulties with the twist is that the travel may not be
constant throughout its length.  I have only the two examples, and it is
difficult to be certain what is happening.
anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills
Sent: Thursday, February 18, 2021 12:42 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



Sorry I did not see your reply to the bone question.

Do not boil your bone. a hot water bath will not hurt the bone, but boiling
will weaken the bone.

Hydrant peroxide a 2-3% will remove the oil and whiten up the bone, if left
to soak in it for a week or two.

here are some pix. of some of my turnings.
C.A.G.

On Thursday, February 18, 2021, 01:19:55 AM EST, anthony
 wrote:


I bought the femur at

Atlantic Coral Enterprise, Inc.
5000 Crescent Technical Court
St. Augustine, FL 32086
Outside FL: 1-800-624-7964
Inside FL: 904-797-7478

I have never glued bone before.  I guess that you might need to boil it
first.  Most of the bone I have worked with has a fair amount of oil in it.
I have had some boiled bone, it seems leached of oil, but I have never
turned it.

I am primarily a turner.  I have turned lots of things, but lately been
making boxes for fun and balusters and similar things for money.

anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills
Sent: Wednesday, February 17, 2021 7:26 AM
To: legacy-ornamental-mills@googlegr

RE: Looking for some new projects.

2021-02-21 Thread bulkeley
Im sorry we could not help first time for us

Bill

-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of anthony
Sent: Monday, 22 February 2021 2:43 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

The turning is long since done.  Took me about an hour each.
I am getting ready to go teach a class.
Talk again this evening.


Since humans quit looking when they think or feel they KNOW the answer, and the 
answer they decide on is so rarely correct or complete, It is better to decide 
that one doesn't know and thus never quit looking.

-Original Message-
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sunday, February 21, 2021 8:19 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



https://www.magnate.net/SearchResults.asp?Cat=230192
this router bit would give you the cut you are looking for. ( A rope with 
the two flats.)
If I had to guess I would say a 1" or larger (what ever the dia. of the 
spindle is what I would use.)

If I were going to make these, I would use both the lathe and the Legacy.
On your spindle you have only three types of cuts, The Roughing cut. and 
then two final cuts.
The Transition cuts around the squares will be hardest trickiest part.
this could be done in a number of ways.

A very small beading bit (most likely a 1/8") for the transitions cuts by 
the squares.(I would do this on my lathe. but there are other ways to make 
this cut.) (even a hack saw blade could work on this cut, after a light cut 
form the 1/8" beading bit's cut to deepen the cut...?)
The bead/ball on the top looks like it uses the same as the rope, If so the 
classical plunge router bit could do everything else.

ONE other note. Just so we are talking the same, a Pitch is . How far the 
spindle moves for one full rotation. It really dose not matter where you 
measure your cut form.
I think I 3" pitch would work just as well as a 2 1/2". By eye it would be 
pretty hard to tell the difference as long as everything is the same. 
(uniformity is the key!)
I hope this helps you out?
Please let me know what you think?

Have a good day.

C.A.G.

On Sunday, February 21, 2021, 03:18:57 AM EST,  
wrote:


If that is a 2 start spiral then the pitch is measured from the center of 
the spiral to 2 twists down see the pic dark arrow. Are the flats your 
referring too were the yellow arrow is pointing in the pic. If so they would 
be done after you mill the barley with a planning bit of the appropriate 
width using the same pitch as the barley.as for other gears you may need you 
will have to find a laser cutting person to make them for you anyone here 
with a with a legacy 1000 could give you the sizes to give the laser 
cutter.i hope that is what your asking
Bill


-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of anthony
Sent: Sunday, 21 February 2021 4:44 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

This is the original message with the question in it.
attached is the image of the sample balusters.

I am reproducing five balusters that have a double-start barley twist.  A 
normal double-start twist, I would usually make by hand.  These balusters 
have four flats that parallel as a transition between each bead and cove 
along the twist.  These make it very difficult to work by hand.

I have gained access to a legacy 1000 mill.  Unfortunately, the travel of 
the twist is 2.25 inches.  That means that I either need a 2.25 or 9 gear; 
the latter could be used with the .25 reduction gear.  Unfortunately, the 
normal gear sets don't include either gear.  Not only have I never used a 
legacy mill, but I know little about making gears or working metal.




Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: bulke...@mmnet.com.au
Sent: Saturday, February 20, 2021 3:02 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for some new projects.

Im not understanding the problem they look fine .

Bill

-Original Message-
From: legacy-ornamental-mills@googlegroups.com
 On Behalf Of anthony
Sent: Saturday, 20 February 2021 7:17 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

When I called them parallel, I meant that the flats were part of the spiral,
that they are part of the spiral.
The spiraled portion of the balusters are tapered.



Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that 

Re: Looking for some new projects.

2021-02-21 Thread 'Curt George' via Legacy Ornamental Mills
 NIce are  you going to use a classical spiral bit now?
an hour each sounds pretty good.
C.A.G. 
On Sunday, February 21, 2021, 02:07:23 PM EST, anthony 
 wrote:  
 
 The turning is long since done.  Took me about an hour each.
I am getting ready to go teach a class.
Talk again this evening.


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sunday, February 21, 2021 8:19 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



https://www.magnate.net/SearchResults.asp?Cat=230192
this router bit would give you the cut you are looking for. ( A rope with 
the two flats.)
If I had to guess I would say a 1" or larger (what ever the dia. of the 
spindle is what I would use.)

If I were going to make these, I would use both the lathe and the Legacy.
On your spindle you have only three types of cuts, The Roughing cut. and 
then two final cuts.
The Transition cuts around the squares will be hardest trickiest part.
this could be done in a number of ways.

A very small beading bit (most likely a 1/8") for the transitions cuts by 
the squares.(I would do this on my lathe. but there are other ways to make 
this cut.) (even a hack saw blade could work on this cut, after a light cut 
form the 1/8" beading bit's cut to deepen the cut...?)
The bead/ball on the top looks like it uses the same as the rope, If so the 
classical plunge router bit could do everything else.

ONE other note. Just so we are talking the same, a Pitch is . How far the 
spindle moves for one full rotation. It really dose not matter where you 
measure your cut form.
I think I 3" pitch would work just as well as a 2 1/2". By eye it would be 
pretty hard to tell the difference as long as everything is the same. 
(uniformity is the key!)
I hope this helps you out?
Please let me know what you think?

Have a good day.

C.A.G.

On Sunday, February 21, 2021, 03:18:57 AM EST,  
wrote:


If that is a 2 start spiral then the pitch is measured from the center of 
the spiral to 2 twists down see the pic dark arrow. Are the flats your 
referring too were the yellow arrow is pointing in the pic. If so they would 
be done after you mill the barley with a planning bit of the appropriate 
width using the same pitch as the barley.as for other gears you may need you 
will have to find a laser cutting person to make them for you anyone here 
with a with a legacy 1000 could give you the sizes to give the laser 
cutter.i hope that is what your asking
Bill


-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of anthony
Sent: Sunday, 21 February 2021 4:44 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

This is the original message with the question in it.
attached is the image of the sample balusters.

I am reproducing five balusters that have a double-start barley twist.  A 
normal double-start twist, I would usually make by hand.  These balusters 
have four flats that parallel as a transition between each bead and cove 
along the twist.  These make it very difficult to work by hand.

I have gained access to a legacy 1000 mill.  Unfortunately, the travel of 
the twist is 2.25 inches.  That means that I either need a 2.25 or 9 gear; 
the latter could be used with the .25 reduction gear.  Unfortunately, the 
normal gear sets don't include either gear.  Not only have I never used a 
legacy mill, but I know little about making gears or working metal.




Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: bulke...@mmnet.com.au
Sent: Saturday, February 20, 2021 3:02 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for some new projects.

Im not understanding the problem they look fine .

Bill

-Original Message-
From: legacy-ornamental-mills@googlegroups.com
 On Behalf Of anthony
Sent: Saturday, 20 February 2021 7:17 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

When I called them parallel, I meant that the flats were part of the spiral,
that they are part of the spiral.
The spiraled portion of the balusters are tapered.



Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: b

Re: Looking for some new projects.

2021-02-21 Thread 'Curt George' via Legacy Ornamental Mills
 https://www.magnate.net/SearchResults.asp?Cat=230192 
this router bit would give you the cut you are looking for. ( A rope with the 
two flats.)  If I had to guess I would say a 1" or larger (what ever the dia. 
of the spindle is what I would use.) If I were going to make these, I would use 
both the lathe and the Legacy.On your spindle you have only three types of 
cuts, The Roughing cut. and then two final cuts.The Transition cuts around the 
squares will be hardest trickiest part. this could be done in a number of ways. 
  A very small beading bit (most likely a 1/8") for the transitions cuts by the 
squares.(I would do this on my lathe. but there are other ways to make this 
cut.) (even a hack saw blade could work on this cut, after a light cut form the 
1/8" beading bit's cut to deepen the cut...?)  The bead/ball on the top looks 
like it uses the same as the rope, If so the classical plunge router bit could 
do everything else.
ONE other note. Just so we are talking the same, a Pitch is . How far the 
spindle moves for one full rotation. It really dose not matter where you 
measure your cut form. I think I 3" pitch would work just as well as a 2 1/2". 
By eye it would be pretty hard to tell the difference as long as everything is 
the same. (uniformity is the key!) I hope this helps you out?Please let me know 
what you think?
Have a good day.
C.A.G.
On Sunday, February 21, 2021, 03:18:57 AM EST,  
wrote:  
 
 If that is a 2 start spiral then the pitch is measured from the center of the 
spiral to 2 twists down see the pic dark arrow. Are the flats your referring 
too were the yellow arrow is pointing in the pic. If so they would be done 
after you mill the barley with a planning bit of the appropriate width using 
the same pitch as the barley.as for other gears you may need you will have to 
find a laser cutting person to make them for you anyone here with a with a 
legacy 1000 could give you the sizes to give the laser cutter.i hope that is 
what your asking
Bill


-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of anthony
Sent: Sunday, 21 February 2021 4:44 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

This is the original message with the question in it.
attached is the image of the sample balusters.

I am reproducing five balusters that have a double-start barley twist.  A 
normal double-start twist, I would usually make by hand.  These balusters have 
four flats that parallel as a transition between each bead and cove along the 
twist.  These make it very difficult to work by hand.

I have gained access to a legacy 1000 mill.  Unfortunately, the travel of the 
twist is 2.25 inches.  That means that I either need a 2.25 or 9 gear; the 
latter could be used with the .25 reduction gear.  Unfortunately, the normal 
gear sets don't include either gear.  Not only have I never used a legacy mill, 
but I know little about making gears or working metal.




Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: bulke...@mmnet.com.au
Sent: Saturday, February 20, 2021 3:02 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for some new projects.

Im not understanding the problem they look fine .

Bill

-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of anthony
Sent: Saturday, 20 February 2021 7:17 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

When I called them parallel, I meant that the flats were part of the spiral, 
that they are part of the spiral.
The spiraled portion of the balusters are tapered.



Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: bulke...@mmnet.com.au
Sent: Saturday, February 20, 2021 1:39 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for some new projects.

So your saying the spiral is meant to be parallel not tapered is that
correct

Bill

-Original Message-
From: legacy-ornamental-mills@googlegroups.com
 On Behalf Of anthony
Sent: Saturday, 20 February 2021 8:16 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

I attached an image of the barley twist and a series of photos of a style of
box I have been making lately.
One of the difficulties with the twist is that the travel may not be
constant throughout its length.  I have only the two examples, and it is
difficult to be certain w

Re: Looking for some new projects.

2021-02-20 Thread Tim Ziegler
Hey Anthony,

Any time you reference something like this chuck your talking about can you
download a pix or two?
Just be curious to see some of these items. Possibly others would be
interested too?
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Feb 20, 2021 at 11:22 AM anthony  wrote:

> A cup chuck.  The important part of the cup chuck is shaped like the
> inside
> of a coffee cup with the rim being very crisp and of a diameter just
> slightly smaller than the major diameter of the sphere and friction holds
> the sphere in place while you work it.  The sphere can be placed in the
> cup
> chuck at any orientation to permit access to its entire surface.  To make
> the box, all of the work on the sphere is done in the cup chuck except the
> initial step of turning the stock from square to approximate sphere.
> The internal box, that piece that comes out of the sphere, is turned
> mostly
> in a regular four-jawed chuck with one step done in a jam chuck.
>
> anthony
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
> -Original Message-
> From: Tim Ziegler
> Sent: Saturday, February 20, 2021 5:47 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
> them are pretty cool. What method are you using to turn the circles on the
> completed Ball type turning?
>
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
>
> On Fri, Feb 19, 2021 at 11:51 PM anthony  wrote:
> I attached an image of the barley twist and a series of photos of a style
> of
> box I have been making lately.
> One of the difficulties with the twist is that the travel may not be
> constant throughout its length.  I have only the two examples, and it is
> difficult to be certain what is happening.
> anthony
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
> -----Original Message-----
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Thursday, February 18, 2021 12:42 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
>
> Sorry I did not see your reply to the bone question.
>
> Do not boil your bone. a hot water bath will not hurt the bone, but boiling
> will weaken the bone.
>
> Hydrant peroxide a 2-3% will remove the oil and whiten up the bone, if left
> to soak in it for a week or two.
>
> here are some pix. of some of my turnings.
> C.A.G.
>
> On Thursday, February 18, 2021, 01:19:55 AM EST, anthony
>  wrote:
>
>
> I bought the femur at
>
> Atlantic Coral Enterprise, Inc.
> 5000 Crescent Technical Court
> St. Augustine, FL 32086
> Outside FL: 1-800-624-7964
> Inside FL: 904-797-7478
>
> I have never glued bone before.  I guess that you might need to boil it
> first.  Most of the bone I have worked with has a fair amount of oil in it.
> I have had some boiled bone, it seems leached of oil, but I have never
> turned it.
>
> I am primarily a turner.  I have turned lots of things, but lately been
> making boxes for fun and balusters and similar things for money.
>
> anthony
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
> -Original Message-
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Wednesday, February 17, 2021 7:26 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
>
> Very Nice Anthony!
>
> Awesome wand.
>
> Where did you find A Giraffe femur?
>
>
> What I have been doing is cutting bone disks out of Cow bones, and then
> gluing the disks into a solid blanks for my turnings. sorta like making
> bone
> Plywood. It take more time to make the blank then it dose to turn it. But
> the results are very nice.
> Please let us know more about what you are doing.
>
>
> C.A.G.
>
> On Wednesday, February 17, 20

RE: Looking for some new projects.

2021-02-20 Thread bulkeley
Im not understanding the problem they look fine .

Bill

-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of anthony
Sent: Saturday, 20 February 2021 7:17 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

When I called them parallel, I meant that the flats were part of the spiral, 
that they are part of the spiral.
The spiraled portion of the balusters are tapered.



Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: bulke...@mmnet.com.au
Sent: Saturday, February 20, 2021 1:39 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for some new projects.

So your saying the spiral is meant to be parallel not tapered is that 
correct

Bill

-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of anthony
Sent: Saturday, 20 February 2021 8:16 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

I attached an image of the barley twist and a series of photos of a style of 
box I have been making lately.
One of the difficulties with the twist is that the travel may not be 
constant throughout its length.  I have only the two examples, and it is 
difficult to be certain what is happening.
anthony


Since humans quit looking when they think or feel they KNOW the answer, and 
the answer they decide on is so rarely correct or complete, It is better to 
decide that one doesn't know and thus never quit looking.

-Original Message-
From: 'Curt George' via Legacy Ornamental Mills
Sent: Thursday, February 18, 2021 12:42 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



Sorry I did not see your reply to the bone question.

Do not boil your bone. a hot water bath will not hurt the bone, but boiling
will weaken the bone.

Hydrant peroxide a 2-3% will remove the oil and whiten up the bone, if left
to soak in it for a week or two.

here are some pix. of some of my turnings.
C.A.G.

On Thursday, February 18, 2021, 01:19:55 AM EST, anthony
 wrote:


I bought the femur at

Atlantic Coral Enterprise, Inc.
5000 Crescent Technical Court
St. Augustine, FL 32086
Outside FL: 1-800-624-7964
Inside FL: 904-797-7478

I have never glued bone before.  I guess that you might need to boil it
first.  Most of the bone I have worked with has a fair amount of oil in it.
I have had some boiled bone, it seems leached of oil, but I have never
turned it.

I am primarily a turner.  I have turned lots of things, but lately been
making boxes for fun and balusters and similar things for money.

anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills
Sent: Wednesday, February 17, 2021 7:26 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



Very Nice Anthony!

Awesome wand.

Where did you find A Giraffe femur?


What I have been doing is cutting bone disks out of Cow bones, and then
gluing the disks into a solid blanks for my turnings. sorta like making bone
Plywood. It take more time to make the blank then it dose to turn it. But
the results are very nice.
Please let us know more about what you are doing.


C.A.G.

On Wednesday, February 17, 2021, 08:10:53 AM EST, anthony
 wrote:


I read that you were considering turning some bone.
I have turned a couple of kinds of bone, this wand is made of Giraffe femur.
It is the densest bone, and has the largest cross section that I have used.
The other materials are Blackwood, Bocote, Pink Ivory, Boxwood, Verawood,
Satine, and Osage Orange.
I call it the Eveready Swiss Army Utility Wand.  Had to get the magical
batteries, the small pieces that screw into the base of the handle, by
seagull, the owls can't fly across the Atlantic, from the Eveready shop in
Diagon Alley.  The toothpick was necessary to quality for Swiss Army.
anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.


-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sunday, February 14, 2021 8:20 PM
To: Legacy ornamental mills
Subject: Looking for some new projects.


HI everyone.

I hope everyone  is well?

Its COLD in my shop, So I spent most of my

Re: Looking for some new projects.

2021-02-20 Thread 'Curt George' via Legacy Ornamental Mills
 Hello again Richard.there is a problem with the Google group server. Andrew 
has replied but no matter how often I approve his e-mails it will not accept 
him as a member. I just approved him again, Now if all works out we should hear 
form him very soon.
C.A.G.
On Saturday, February 20, 2021, 12:01:52 PM EST, Richard Ellis 
 wrote:  
 
 Thanks Curt for the replyIt looks like it is the pitch that is the problem.Now 
a different matter When I try to reply to the author.   ( You  )It tells me I 
must belong to the Group ---Why is that ?? Richard

On Saturday, February 20, 2021 at 3:51:16 PM UTC Curt George wrote:

 Hello Richard this link has frayed and gone into 100 different directions.  
Here is the photo Anthony posted. If you go to the group page you can see the 
others that he sent.
C.A.G.
On Saturday, February 20, 2021, 10:42:02 AM EST, Richard Ellis 
 wrote:  
 
 Be nice to see a photo or two so I can understand it better. From what I have 
read it is a square  long shape with tapers let in it at intervalsRichard ( 
U.K. )
On Sat, Feb 20, 2021 at 3:19 PM anthony  wrote:

When I called them parallel, I meant that the flats were part of the spiral, 
that they are part of the spiral.
The spiraled portion of the balusters are tapered.



Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: bulk...@mmnet.com.au
Sent: Saturday, February 20, 2021 1:39 AM
To: legacy-orna...@googlegroups.com
Subject: RE: Looking for some new projects.

So your saying the spiral is meant to be parallel not tapered is that 
correct

Bill

-Original Message-
From: legacy-orna...@googlegroups.com 
 On Behalf Of anthony
Sent: Saturday, 20 February 2021 8:16 AM
To: legacy-orna...@googlegroups.com
Subject: Re: Looking for some new projects.

I attached an image of the barley twist and a series of photos of a style of 
box I have been making lately.
One of the difficulties with the twist is that the travel may not be 
constant throughout its length.  I have only the two examples, and it is 
difficult to be certain what is happening.
anthony


Since humans quit looking when they think or feel they KNOW the answer, and 
the answer they decide on is so rarely correct or complete, It is better to 
decide that one doesn't know and thus never quit looking.

-Original Message-
From: 'Curt George' via Legacy Ornamental Mills
Sent: Thursday, February 18, 2021 12:42 AM
To: legacy-orna...@googlegroups.com
Subject: Re: Looking for some new projects.



Sorry I did not see your reply to the bone question.

Do not boil your bone. a hot water bath will not hurt the bone, but boiling
will weaken the bone.

Hydrant peroxide a 2-3% will remove the oil and whiten up the bone, if left
to soak in it for a week or two.

here are some pix. of some of my turnings.
C.A.G.

On Thursday, February 18, 2021, 01:19:55 AM EST, anthony
 wrote:


I bought the femur at

Atlantic Coral Enterprise, Inc.
5000 Crescent Technical Court
St. Augustine, FL 32086
Outside FL: 1-800-624-7964
Inside FL: 904-797-7478

I have never glued bone before.  I guess that you might need to boil it
first.  Most of the bone I have worked with has a fair amount of oil in it.
I have had some boiled bone, it seems leached of oil, but I have never
turned it.

I am primarily a turner.  I have turned lots of things, but lately been
making boxes for fun and balusters and similar things for money.

anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills
Sent: Wednesday, February 17, 2021 7:26 AM
To: legacy-orna...@googlegroups.com
Subject: Re: Looking for some new projects.



Very Nice Anthony!

Awesome wand.

Where did you find A Giraffe femur?


What I have been doing is cutting bone disks out of Cow bones, and then
gluing the disks into a solid blanks for my turnings. sorta like making bone
Plywood. It take more time to make the blank then it dose to turn it. But
the results are very nice.
Please let us know more about what you are doing.


C.A.G.

On Wednesday, February 17, 2021, 08:10:53 AM EST, anthony
 wrote:


I read that you were considering turning some bone.
I have turned a couple of kinds of bone, this wand is made of Giraffe femur.
It is the densest bone, and has the largest cross section that I have used.
The other materials are Blackwood, Bocote, Pink Ivory, Boxwood, Verawood,
Satine, and Osage Orange.
I call it the Eveready Swiss Army Utility Wand.  Had

Re: Looking for some new projects.

2021-02-20 Thread anthony
A cup chuck.  The important part of the cup chuck is shaped like the inside 
of a coffee cup with the rim being very crisp and of a diameter just 
slightly smaller than the major diameter of the sphere and friction holds 
the sphere in place while you work it.  The sphere can be placed in the cup 
chuck at any orientation to permit access to its entire surface.  To make 
the box, all of the work on the sphere is done in the cup chuck except the 
initial step of turning the stock from square to approximate sphere.
The internal box, that piece that comes out of the sphere, is turned mostly 
in a regular four-jawed chuck with one step done in a jam chuck.


anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: Tim Ziegler

Sent: Saturday, February 20, 2021 5:47 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.


them are pretty cool. What method are you using to turn the circles on the 
completed Ball type turning?



Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell



On Fri, Feb 19, 2021 at 11:51 PM anthony  wrote:
I attached an image of the barley twist and a series of photos of a style of
box I have been making lately.
One of the difficulties with the twist is that the travel may not be
constant throughout its length.  I have only the two examples, and it is
difficult to be certain what is happening.
anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills

Sent: Thursday, February 18, 2021 12:42 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



Sorry I did not see your reply to the bone question.

Do not boil your bone. a hot water bath will not hurt the bone, but boiling
will weaken the bone.

Hydrant peroxide a 2-3% will remove the oil and whiten up the bone, if left
to soak in it for a week or two.

here are some pix. of some of my turnings.
C.A.G.

On Thursday, February 18, 2021, 01:19:55 AM EST, anthony
 wrote:


I bought the femur at

Atlantic Coral Enterprise, Inc.
5000 Crescent Technical Court
St. Augustine, FL 32086
Outside FL: 1-800-624-7964
Inside FL: 904-797-7478

I have never glued bone before.  I guess that you might need to boil it
first.  Most of the bone I have worked with has a fair amount of oil in it.
I have had some boiled bone, it seems leached of oil, but I have never
turned it.

I am primarily a turner.  I have turned lots of things, but lately been
making boxes for fun and balusters and similar things for money.

anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills

Sent: Wednesday, February 17, 2021 7:26 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



Very Nice Anthony!

Awesome wand.

Where did you find A Giraffe femur?


What I have been doing is cutting bone disks out of Cow bones, and then
gluing the disks into a solid blanks for my turnings. sorta like making bone
Plywood. It take more time to make the blank then it dose to turn it. But
the results are very nice.
Please let us know more about what you are doing.


C.A.G.

On Wednesday, February 17, 2021, 08:10:53 AM EST, anthony
 wrote:


I read that you were considering turning some bone.
I have turned a couple of kinds of bone, this wand is made of Giraffe femur.
It is the densest bone, and has the largest cross section that I have used.
The other materials are Blackwood, Bocote, Pink Ivory, Boxwood, Verawood,
Satine, and Osage Orange.
I call it the Eveready Swiss Army Utility Wand.  Had to get the magical
batteries, the small pieces that screw into the base of the handle, by
seagull, the owls can't fly across the Atlantic, from the Eveready shop in
Diagon Alley.  The toothpick was necessary to quality for Swiss Army.
anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.


-Original Message- 
From: 'Curt George' via Legacy Ornamental M

Re: Looking for some new projects.

2021-02-20 Thread Richard Ellis
Thanks Curt for the reply
It looks like it is the pitch that is the problem.
Now a different matter When I try to reply to the author.   ( You  )It 
tells me I must belong to the Group ---Why is that ?? 
Richard

On Saturday, February 20, 2021 at 3:51:16 PM UTC Curt George wrote:

> Hello Richard this link has frayed and gone into 100 different 
> directions.  Here is the photo Anthony posted. If you go to the group page 
> you can see the others that he sent.
>
> C.A.G.
>
> On Saturday, February 20, 2021, 10:42:02 AM EST, Richard Ellis <
> rchrd@gmail.com> wrote: 
>
>
> Be nice to see a photo or two so I can understand it better. From what I 
> have read it is a square  long shape with tapers let in it at intervals
> Richard ( U.K. )
>
> On Sat, Feb 20, 2021 at 3:19 PM anthony  wrote:
>
> When I called them parallel, I meant that the flats were part of the 
> spiral, 
> that they are part of the spiral.
> The spiraled portion of the balusters are tapered.
>
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
> -Original Message- 
> From: bulk...@mmnet.com.au
> Sent: Saturday, February 20, 2021 1:39 AM
> To: legacy-orna...@googlegroups.com
> Subject: RE: Looking for some new projects.
>
> So your saying the spiral is meant to be parallel not tapered is that 
> correct
>
> Bill
>
> -Original Message-
> From: legacy-orna...@googlegroups.com 
>  On Behalf Of anthony
> Sent: Saturday, 20 February 2021 8:16 AM
> To: legacy-orna...@googlegroups.com
> Subject: Re: Looking for some new projects.
>
> I attached an image of the barley twist and a series of photos of a style 
> of 
> box I have been making lately.
> One of the difficulties with the twist is that the travel may not be 
> constant throughout its length.  I have only the two examples, and it is 
> difficult to be certain what is happening.
> anthony
>
> 
> Since humans quit looking when they think or feel they KNOW the answer, 
> and 
> the answer they decide on is so rarely correct or complete, It is better 
> to 
> decide that one doesn't know and thus never quit looking.
> ____
> -----Original Message-
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Thursday, February 18, 2021 12:42 AM
> To: legacy-orna...@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
>
> Sorry I did not see your reply to the bone question.
>
> Do not boil your bone. a hot water bath will not hurt the bone, but boiling
> will weaken the bone.
>
> Hydrant peroxide a 2-3% will remove the oil and whiten up the bone, if left
> to soak in it for a week or two.
>
> here are some pix. of some of my turnings.
> C.A.G.
>
> On Thursday, February 18, 2021, 01:19:55 AM EST, anthony
>  wrote:
>
>
> I bought the femur at
>
> Atlantic Coral Enterprise, Inc.
> 5000 Crescent Technical Court
> St. Augustine, FL 32086
> Outside FL: 1-800-624-7964 <(800)%20624-7964>
> Inside FL: 904-797-7478 <(904)%20797-7478>
>
> I have never glued bone before.  I guess that you might need to boil it
> first.  Most of the bone I have worked with has a fair amount of oil in it.
> I have had some boiled bone, it seems leached of oil, but I have never
> turned it.
>
> I am primarily a turner.  I have turned lots of things, but lately been
> making boxes for fun and balusters and similar things for money.
>
> anthony
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
> -Original Message- 
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Wednesday, February 17, 2021 7:26 AM
> To: legacy-orna...@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
>
> Very Nice Anthony!
>
> Awesome wand.
>
> Where did you find A Giraffe femur?
>
>
> What I have been doing is cutting bone disks out of Cow bones, and then
> gluing the disks into a solid blanks for my turnings. sorta like making 
> bone
> Plywood. It take more time to make the blank then it dose to turn it. But
> the results are very nice.
> Please let us know more about what you are doing.
>
>
> C.A.G.
>
> On Wednesday, February 17, 2021, 08:10:53 AM EST, anthony
>

Re: Looking for some new projects.

2021-02-20 Thread Richard Ellis
Be nice to see a photo or two so I can understand it better. From what I
have read it is a square  long shape with tapers let in it at intervals
Richard ( U.K. )

On Sat, Feb 20, 2021 at 3:19 PM anthony  wrote:

> When I called them parallel, I meant that the flats were part of the
> spiral,
> that they are part of the spiral.
> The spiraled portion of the balusters are tapered.
>
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
> -Original Message-
> From: bulke...@mmnet.com.au
> Sent: Saturday, February 20, 2021 1:39 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: Looking for some new projects.
>
> So your saying the spiral is meant to be parallel not tapered is that
> correct
>
> Bill
>
> -Original Message-
> From: legacy-ornamental-mills@googlegroups.com
>  On Behalf Of anthony
> Sent: Saturday, 20 February 2021 8:16 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
> I attached an image of the barley twist and a series of photos of a style
> of
> box I have been making lately.
> One of the difficulties with the twist is that the travel may not be
> constant throughout its length.  I have only the two examples, and it is
> difficult to be certain what is happening.
> anthony
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and
> the answer they decide on is so rarely correct or complete, It is better
> to
> decide that one doesn't know and thus never quit looking.
> 
> -Original Message-
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Thursday, February 18, 2021 12:42 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
>
> Sorry I did not see your reply to the bone question.
>
> Do not boil your bone. a hot water bath will not hurt the bone, but boiling
> will weaken the bone.
>
> Hydrant peroxide a 2-3% will remove the oil and whiten up the bone, if left
> to soak in it for a week or two.
>
> here are some pix. of some of my turnings.
> C.A.G.
>
> On Thursday, February 18, 2021, 01:19:55 AM EST, anthony
>  wrote:
>
>
> I bought the femur at
>
> Atlantic Coral Enterprise, Inc.
> 5000 Crescent Technical Court
> St. Augustine, FL 32086
> Outside FL: 1-800-624-7964
> Inside FL: 904-797-7478
>
> I have never glued bone before.  I guess that you might need to boil it
> first.  Most of the bone I have worked with has a fair amount of oil in it.
> I have had some boiled bone, it seems leached of oil, but I have never
> turned it.
>
> I am primarily a turner.  I have turned lots of things, but lately been
> making boxes for fun and balusters and similar things for money.
>
> anthony
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
> -Original Message-
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Wednesday, February 17, 2021 7:26 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
>
> Very Nice Anthony!
>
> Awesome wand.
>
> Where did you find A Giraffe femur?
>
>
> What I have been doing is cutting bone disks out of Cow bones, and then
> gluing the disks into a solid blanks for my turnings. sorta like making
> bone
> Plywood. It take more time to make the blank then it dose to turn it. But
> the results are very nice.
> Please let us know more about what you are doing.
>
>
> C.A.G.
>
> On Wednesday, February 17, 2021, 08:10:53 AM EST, anthony
>  wrote:
>
>
> I read that you were considering turning some bone.
> I have turned a couple of kinds of bone, this wand is made of Giraffe
> femur.
> It is the densest bone, and has the largest cross section that I have used.
> The other materials are Blackwood, Bocote, Pink Ivory, Boxwood, Verawood,
> Satine, and Osage Orange.
> I call it the Eveready Swiss Army Utility Wand.  Had to get the magical
> batteries, the small pieces that screw into the base of the handle, by
> seagull, the owls can't fly across the Atlantic, from the Eveready shop in
> Diagon Alley.  The toothpick was necessary to quality for Swiss Army.
> anthony
>
&

Re: Looking for some new projects.

2021-02-20 Thread anthony
When I called them parallel, I meant that the flats were part of the spiral, 
that they are part of the spiral.

The spiraled portion of the balusters are tapered.



Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: bulke...@mmnet.com.au

Sent: Saturday, February 20, 2021 1:39 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for some new projects.

So your saying the spiral is meant to be parallel not tapered is that 
correct


Bill

-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of anthony

Sent: Saturday, 20 February 2021 8:16 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

I attached an image of the barley twist and a series of photos of a style of 
box I have been making lately.
One of the difficulties with the twist is that the travel may not be 
constant throughout its length.  I have only the two examples, and it is 
difficult to be certain what is happening.

anthony


Since humans quit looking when they think or feel they KNOW the answer, and 
the answer they decide on is so rarely correct or complete, It is better to 
decide that one doesn't know and thus never quit looking.


-Original Message-
From: 'Curt George' via Legacy Ornamental Mills
Sent: Thursday, February 18, 2021 12:42 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



Sorry I did not see your reply to the bone question.

Do not boil your bone. a hot water bath will not hurt the bone, but boiling
will weaken the bone.

Hydrant peroxide a 2-3% will remove the oil and whiten up the bone, if left
to soak in it for a week or two.

here are some pix. of some of my turnings.
C.A.G.

On Thursday, February 18, 2021, 01:19:55 AM EST, anthony
 wrote:


I bought the femur at

Atlantic Coral Enterprise, Inc.
5000 Crescent Technical Court
St. Augustine, FL 32086
Outside FL: 1-800-624-7964
Inside FL: 904-797-7478

I have never glued bone before.  I guess that you might need to boil it
first.  Most of the bone I have worked with has a fair amount of oil in it.
I have had some boiled bone, it seems leached of oil, but I have never
turned it.

I am primarily a turner.  I have turned lots of things, but lately been
making boxes for fun and balusters and similar things for money.

anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills

Sent: Wednesday, February 17, 2021 7:26 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



Very Nice Anthony!

Awesome wand.

Where did you find A Giraffe femur?


What I have been doing is cutting bone disks out of Cow bones, and then
gluing the disks into a solid blanks for my turnings. sorta like making bone
Plywood. It take more time to make the blank then it dose to turn it. But
the results are very nice.
Please let us know more about what you are doing.


C.A.G.

On Wednesday, February 17, 2021, 08:10:53 AM EST, anthony
 wrote:


I read that you were considering turning some bone.
I have turned a couple of kinds of bone, this wand is made of Giraffe femur.
It is the densest bone, and has the largest cross section that I have used.
The other materials are Blackwood, Bocote, Pink Ivory, Boxwood, Verawood,
Satine, and Osage Orange.
I call it the Eveready Swiss Army Utility Wand.  Had to get the magical
batteries, the small pieces that screw into the base of the handle, by
seagull, the owls can't fly across the Atlantic, from the Eveready shop in
Diagon Alley.  The toothpick was necessary to quality for Swiss Army.
anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.


-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills

Sent: Sunday, February 14, 2021 8:20 PM
To: Legacy ornamental mills
Subject: Looking for some new projects.


HI everyone.

I hope everyone  is well?

Its COLD in my shop, So I spent most of my day staying inside. I've been
looking for projects to play with on the Legacy and or my Lathe. On the
internet today.

I want to do some more bone turning, I have already cut out a number of bone
disks, I am looking forward to gluing them up into something that I can
turn, soon

Re: Looking for some new projects.

2021-02-20 Thread Tim Ziegler
them are pretty cool. What method are you using to turn the circles on the
completed Ball type turning?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Feb 19, 2021 at 11:51 PM anthony  wrote:

> I attached an image of the barley twist and a series of photos of a style
> of
> box I have been making lately.
> One of the difficulties with the twist is that the travel may not be
> constant throughout its length.  I have only the two examples, and it is
> difficult to be certain what is happening.
> anthony
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
> -Original Message-
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Thursday, February 18, 2021 12:42 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
>
> Sorry I did not see your reply to the bone question.
>
> Do not boil your bone. a hot water bath will not hurt the bone, but
> boiling
> will weaken the bone.
>
> Hydrant peroxide a 2-3% will remove the oil and whiten up the bone, if
> left
> to soak in it for a week or two.
>
> here are some pix. of some of my turnings.
> C.A.G.
>
> On Thursday, February 18, 2021, 01:19:55 AM EST, anthony
>  wrote:
>
>
> I bought the femur at
>
> Atlantic Coral Enterprise, Inc.
> 5000 Crescent Technical Court
> St. Augustine, FL 32086
> Outside FL: 1-800-624-7964
> Inside FL: 904-797-7478
>
> I have never glued bone before.  I guess that you might need to boil it
> first.  Most of the bone I have worked with has a fair amount of oil in it.
> I have had some boiled bone, it seems leached of oil, but I have never
> turned it.
>
> I am primarily a turner.  I have turned lots of things, but lately been
> making boxes for fun and balusters and similar things for money.
>
> anthony
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
> -Original Message-----
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Wednesday, February 17, 2021 7:26 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
>
> Very Nice Anthony!
>
> Awesome wand.
>
> Where did you find A Giraffe femur?
>
>
> What I have been doing is cutting bone disks out of Cow bones, and then
> gluing the disks into a solid blanks for my turnings. sorta like making
> bone
> Plywood. It take more time to make the blank then it dose to turn it. But
> the results are very nice.
> Please let us know more about what you are doing.
>
>
> C.A.G.
>
> On Wednesday, February 17, 2021, 08:10:53 AM EST, anthony
>  wrote:
>
>
> I read that you were considering turning some bone.
> I have turned a couple of kinds of bone, this wand is made of Giraffe
> femur.
> It is the densest bone, and has the largest cross section that I have used.
> The other materials are Blackwood, Bocote, Pink Ivory, Boxwood, Verawood,
> Satine, and Osage Orange.
> I call it the Eveready Swiss Army Utility Wand.  Had to get the magical
> batteries, the small pieces that screw into the base of the handle, by
> seagull, the owls can't fly across the Atlantic, from the Eveready shop in
> Diagon Alley.  The toothpick was necessary to quality for Swiss Army.
> anthony
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
>
> -Original Message-
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Sunday, February 14, 2021 8:20 PM
> To: Legacy ornamental mills
> Subject: Looking for some new projects.
>
>
> HI everyone.
>
> I hope everyone  is well?
>
> Its COLD in my shop, So I spent most of my day staying inside. I've been
> looking for projects to play with on the Legacy and or my Lathe. On the
> internet today.
>
> I want to do some more bone turning, I have already cut out a number of
> bone
> disks, I am looking forward to gluing them up into something that I can
> turn, soon.
> The problem is What should I make?
> I don't

RE: Looking for some new projects.

2021-02-19 Thread bulkeley
So your saying the spiral is meant to be parallel not tapered is that correct

Bill

-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of anthony
Sent: Saturday, 20 February 2021 8:16 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

I attached an image of the barley twist and a series of photos of a style of 
box I have been making lately.
One of the difficulties with the twist is that the travel may not be constant 
throughout its length.  I have only the two examples, and it is difficult to be 
certain what is happening.
anthony


Since humans quit looking when they think or feel they KNOW the answer, and the 
answer they decide on is so rarely correct or complete, It is better to decide 
that one doesn't know and thus never quit looking.

-Original Message-
From: 'Curt George' via Legacy Ornamental Mills
Sent: Thursday, February 18, 2021 12:42 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



Sorry I did not see your reply to the bone question.

Do not boil your bone. a hot water bath will not hurt the bone, but boiling 
will weaken the bone.

Hydrant peroxide a 2-3% will remove the oil and whiten up the bone, if left 
to soak in it for a week or two.

here are some pix. of some of my turnings.
C.A.G.

On Thursday, February 18, 2021, 01:19:55 AM EST, anthony 
 wrote:


I bought the femur at

Atlantic Coral Enterprise, Inc.
5000 Crescent Technical Court
St. Augustine, FL 32086
Outside FL: 1-800-624-7964
Inside FL: 904-797-7478

I have never glued bone before.  I guess that you might need to boil it
first.  Most of the bone I have worked with has a fair amount of oil in it.
I have had some boiled bone, it seems leached of oil, but I have never
turned it.

I am primarily a turner.  I have turned lots of things, but lately been
making boxes for fun and balusters and similar things for money.

anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills
Sent: Wednesday, February 17, 2021 7:26 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



Very Nice Anthony!

Awesome wand.

Where did you find A Giraffe femur?


What I have been doing is cutting bone disks out of Cow bones, and then
gluing the disks into a solid blanks for my turnings. sorta like making bone
Plywood. It take more time to make the blank then it dose to turn it. But
the results are very nice.
Please let us know more about what you are doing.


C.A.G.

On Wednesday, February 17, 2021, 08:10:53 AM EST, anthony
 wrote:


I read that you were considering turning some bone.
I have turned a couple of kinds of bone, this wand is made of Giraffe femur.
It is the densest bone, and has the largest cross section that I have used.
The other materials are Blackwood, Bocote, Pink Ivory, Boxwood, Verawood,
Satine, and Osage Orange.
I call it the Eveready Swiss Army Utility Wand.  Had to get the magical
batteries, the small pieces that screw into the base of the handle, by
seagull, the owls can't fly across the Atlantic, from the Eveready shop in
Diagon Alley.  The toothpick was necessary to quality for Swiss Army.
anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.


-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sunday, February 14, 2021 8:20 PM
To: Legacy ornamental mills
Subject: Looking for some new projects.


HI everyone.

I hope everyone  is well?

Its COLD in my shop, So I spent most of my day staying inside. I've been
looking for projects to play with on the Legacy and or my Lathe. On the
internet today.

I want to do some more bone turning, I have already cut out a number of bone
disks, I am looking forward to gluing them up into something that I can
turn, soon.
The problem is What should I make?
I don't like pen's!
I have already made a number of magnify glass's and other kits type of
projects.

I have gone to a number of dollar stores and hardware and thrift stores,
looking for cheaply made things that can be re-worked. but so far no luck
finding anything new.
So I thought I would ask you all.  Dose anyone know of a nice projects, that
you like to make? Family heirloom type of stuff.  Perhaps a letter opener?
or ???

Any and all ideas are welcome.

Looking forward to talking to you all more.

Have a good night.

C.A.G.




-- 
You received this message because you

Re: Looking for some new projects.

2021-02-18 Thread Tim Ziegler
Perfect link. I have the infloor loops keeps me happy at about 65-68
except in the late spring or early fall when days are warmer it may creep
up to 70 or so.
Perfect temps for the LOM's
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Feb 18, 2021 at 8:17 PM M.W.Foscue  wrote:

> Michael, Tim Z. & others,
>
> Keeping my reply "LOM related":  The LOM does NOT like having to do its
> thing in a C-O-L-D shop.  After-all, its primary makeup is aluminum!
> Therefore - to keep your LOM "happy" and performing at its peak - you need
> to H-E-A-T your shop!
> (For the Aussie:  "Happy Mill - Happy Bill!")
> All that being said - I found it too coincidental that over the past week
> or so we have had discussions here about heating the shop.  Then today I
> got an email from *Wood Magazine* with their lead article being "Whole
> Shop Heating Systems"!!   How crazy is that?!?!?
>
> Here is a link to the article:
>
>
> https://www.woodmagazine.com/workshop/shop-maintenance/whole-shop-heating-systems?did=608435-20210218_campaign=wood-online_newsletter_source=woodmagazine.com_medium=email_content=021821=608435=51246610125
>
> Enjoy!
> Mac
> --
>
> -Original Message-
> From: Michael Kratky
> Sent: Feb 16, 2021 11:27 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: Looking for some new projects.
>
> Hi Timothy,
>
>
>
> It’s an American Harvest about 12 years old designed to burn most anything
> (but not coal), have burned corn and even cherry pits in it but now just
> wood pellets as that’s all I can find; cost me about $7.50/day to heat my
> 2400 sq ft home at a comfortable 70°F during the coldest times January,
> February, and March.
>
>
>
> 1200 sq ft shop is a super efficient Rinnai EX 38CWP propane wall furnace
> that cost me only about $2/day to heat at a constant 60°F.
>
>
>
> Thanks for send you weather my way,
>
>
>
> Michael Kratky
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim Ziegler
> *Sent:* Monday, February 15, 2021 10:08 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> yup what brand you Michael?
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
> --
>
> On Mon, Feb 15, 2021 at 7:50 AM Michael Kratky 
> wrote:
>
> LOL, what country we even burn food here for energy; I actually have a
> heating stove that’s designed to burn corn.
>
>
>
> Michael
> --------------
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *
> bulke...@mmnet.com.au
> *Sent:* Monday, February 15, 2021 8:13 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Looking for some new projects.
>
>
>
> Yep I will go along with that. Now please forgive my ignorance but what is
> a corn boiler
>
>
>
> Here a boiler is a pot we cook food in like lobster or yabbies in, is it
> some sort of large heater over there?
>
>
>
> Bill
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, 15 February 2021 10:48 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Lets just meet in the middle and I think we'd all be happier Bill.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
> ------
>
>  On Mon, Feb 15, 2021 at 1:24 AM  wrote:
>
> I’ll trade you guys for a bit of that cold its 90 ºF  here today
>
>
>
> Bill
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Monday, 15 February 2021 3:48 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Tim,
>
> I think I heard on the radio that Ely hit minus 50ºF yesterday or the day
> before!
>
> I believe they said it was a record low temp for that date.
>
> It ought to be very safe for you to go out ice fishing this coming week.
>
> Stay warm.
>
> Mac
> --
> --
>
> -Original Message-
> From: Tim Ziegler
> Sent: Feb 14, 2021 10:00 PM
&

Re: Looking for some new projects.

2021-02-18 Thread Tim Ziegler
Our computers have ears lol.
They really do.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Feb 18, 2021 at 8:17 PM M.W.Foscue  wrote:

> Michael, Tim Z. & others,
>
> Keeping my reply "LOM related":  The LOM does NOT like having to do its
> thing in a C-O-L-D shop.  After-all, its primary makeup is aluminum!
> Therefore - to keep your LOM "happy" and performing at its peak - you need
> to H-E-A-T your shop!
> (For the Aussie:  "Happy Mill - Happy Bill!")
> All that being said - I found it too coincidental that over the past week
> or so we have had discussions here about heating the shop.  Then today I
> got an email from *Wood Magazine* with their lead article being "Whole
> Shop Heating Systems"!!   How crazy is that?!?!?
>
> Here is a link to the article:
>
>
> https://www.woodmagazine.com/workshop/shop-maintenance/whole-shop-heating-systems?did=608435-20210218_campaign=wood-online_newsletter_source=woodmagazine.com_medium=email_content=021821=608435=51246610125
>
> Enjoy!
> Mac
> --
>
> -Original Message-
> From: Michael Kratky
> Sent: Feb 16, 2021 11:27 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: Looking for some new projects.
>
> Hi Timothy,
>
>
>
> It’s an American Harvest about 12 years old designed to burn most anything
> (but not coal), have burned corn and even cherry pits in it but now just
> wood pellets as that’s all I can find; cost me about $7.50/day to heat my
> 2400 sq ft home at a comfortable 70°F during the coldest times January,
> February, and March.
>
>
>
> 1200 sq ft shop is a super efficient Rinnai EX 38CWP propane wall furnace
> that cost me only about $2/day to heat at a constant 60°F.
>
>
>
> Thanks for send you weather my way,
>
>
>
> Michael Kratky
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim Ziegler
> *Sent:* Monday, February 15, 2021 10:08 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> yup what brand you Michael?
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
> --
>
> On Mon, Feb 15, 2021 at 7:50 AM Michael Kratky 
> wrote:
>
> LOL, what country we even burn food here for energy; I actually have a
> heating stove that’s designed to burn corn.
>
>
>
> Michael
> --------------
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *
> bulke...@mmnet.com.au
> *Sent:* Monday, February 15, 2021 8:13 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Looking for some new projects.
>
>
>
> Yep I will go along with that. Now please forgive my ignorance but what is
> a corn boiler
>
>
>
> Here a boiler is a pot we cook food in like lobster or yabbies in, is it
> some sort of large heater over there?
>
>
>
> Bill
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, 15 February 2021 10:48 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Lets just meet in the middle and I think we'd all be happier Bill.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
> ------
>
>  On Mon, Feb 15, 2021 at 1:24 AM  wrote:
>
> I’ll trade you guys for a bit of that cold its 90 ºF  here today
>
>
>
> Bill
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Monday, 15 February 2021 3:48 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Tim,
>
> I think I heard on the radio that Ely hit minus 50ºF yesterday or the day
> before!
>
> I believe they said it was a record low temp for that date.
>
> It ought to be very safe for you to go out ice fishing this coming week.
>
> Stay warm.
>
> Mac
> --
> --
>
> -Original Message-
> From: Tim Ziegler
> Sent: Feb 14, 2021 10:00 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
> Hey Harvey hope all is well g

RE: Looking for some new projects.

2021-02-18 Thread M.W.Foscue
Michael, Tim Z. & others,Keeping my reply "LOM related":  The LOM does NOT like having to do its thing in a C-O-L-D shop.  After-all, its primary makeup is aluminum!Therefore - to keep your LOM "happy" and performing at its peak - you need to H-E-A-T your shop!   (For the Aussie:  "Happy Mill - Happy Bill!")All that being said - I found it too coincidental that over the past week or so we have had discussions here about heating the shop.  Then today I got an email from Wood Magazine with their lead article being "Whole Shop Heating Systems"!!   How crazy is that?!?!?Here is a link to the article:https://www.woodmagazine.com/workshop/shop-maintenance/whole-shop-heating-systems?did=608435-20210218_campaign=wood-online_newsletter_source=woodmagazine.com_medium=email_content=021821=608435=51246610125Enjoy!Mac-Original Message-
From: Michael Kratky 
Sent: Feb 16, 2021 11:27 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for some new projects.

Hi Timothy,  It’s an American Harvest about 12 years old designed to burn most anything (but not coal), have burned corn and even cherry pits in it but now just wood pellets as that’s all I can find; cost me about $7.50/day to heat my 2400 sq ft home at a comfortable 70°F during the coldest times January, February, and March.  1200 sq ft shop is a super efficient Rinnai EX 38CWP propane wall furnace that cost me only about $2/day to heat at a constant 60°F. Thanks for send you weather my way, Michael KratkyFrom: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim ZieglerSent: Monday, February 15, 2021 10:08 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Looking for some new projects. yup what brand you Michael? Kind Regards, Timothy J. ZieglerOn Mon, Feb 15, 2021 at 7:50 AM Michael Kratky <krat...@roadrunner.com> wrote:LOL, what country we even burn food here for energy; I actually have a heating stove that’s designed to burn corn. MichaelFrom: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of bulke...@mmnet.com.auSent: Monday, February 15, 2021 8:13 AMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: Looking for some new projects. Yep I will go along with that. Now please forgive my ignorance but what is a corn boiler Here a boiler is a pot we cook food in like lobster or yabbies in, is it some sort of large heater over there? BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Tim ZieglerSent: Monday, 15 February 2021 10:48 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Looking for some new projects. Lets just meet in the middle and I think we'd all be happier Bill. Kind Regards, Timothy J. Ziegler On Mon, Feb 15, 2021 at 1:24 AM <bulke...@mmnet.com.au> wrote:I’ll trade you guys for a bit of that cold its 90 ºF  here today BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.FoscueSent: Monday, 15 February 2021 3:48 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Looking for some new projects. Tim,I think I heard on the radio that Ely hit minus 50ºF yesterday or the day before!I believe they said it was a record low temp for that date.It ought to be very safe for you to go out ice fishing this coming week. Stay warm.Mac-Original Message- From: Tim Ziegler Sent: Feb 14, 2021 10:00 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Looking for some new projects. Hey Harvey hope all is well good to see your still following. Suppose to hit 30 below here tonight. wow what a long cold snap. Kind Regards, Timothy J. ZieglerOn Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas <hmatyas0...@gmail.com> wrote:Hi Curt You already probably know about this guy but here goes. Projects Archives | Turning for Profit | Woodturning | Lathe | He has like a user group where  he periodically sends out emails that have projects in them. I hope this helps, keep warm. HarveyOn Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote:HI everyone. I hope everyone  is well? Its COLD in my shop, So I spent most of my day staying inside. I've beenlooking for projects to play with on the Legacy and or my Lathe. On the internet today. I want to do some more bone turning, I have already cut out a number of bone disks, I am looking forward to gluing them up into something that I can turn, soon.The problem is What should I make?I don't like pen's! I have already made a number of magnify glass's and other kits type of projects.  I have gone to a number of dollar stores and hardware and thrift stores, looking for cheaply made things that can be re-worked. but so far no luck finding anything new.So I thought I would ask you all.  Dose anyone know of a nice projects

RE: Looking for some new projects.

2021-02-18 Thread bulkeley
Are you needing a 4 start spiral this with the standard gears a 71/2 pitch the 
G gear might be what your looking for , a pic of what your trying to do would 
be a great help for use to guide you

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Thursday, 18 February 2021 10:49 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

Hey Anthony,

 

Just throwing my 5 cents worth in but when I got my 1200 LOM I went direct to 
Legacy and spoke to Cindy.

It took a few weeks but was able to get all the gearing, indexing plates, split 
nuts, misc. track nuts and the 

spray for slides "Easy Glide" I think its called. 

I had to spend the money but so worth it to have the complete package. other 
items you just have to wait

for people to sell parts. 

Hope that helps. I'm sure others answered last night at some crazy late hours 
lol. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Thu, Feb 18, 2021 at 12:11 AM anthony mailto:acmepi...@gmail.com> > wrote:

I am reproducing five balusters that have a double-start barley twist.  A 
normal double-start twist, I would usually make by hand.  These balusters 
have four flats that parallel as a transition between each bead and cove 
along the twist.  These make it very difficult to work by hand.

I have gained access to a legacy 1000 mill.  Unfortunately, the travel of 
the twist is 2.25 inches.  That means that I either need a 2.25 or 9 gear; 
the latter could be used with the .25 reduction gear.  Unfortunately, the 
normal gear sets don't include either.  Not only have I never used a legacy 
mill, but I know little about making gears or working metal.

Do you have a suggestion?
Perhaps my previous message only reached you rather than the group as a 
whole.

anthony

Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills
Sent: Wednesday, February 17, 2021 7:26 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Looking for some new projects.



Very Nice Anthony!

Awesome wand.

Where did you find A Giraffe femur?


What I have been doing is cutting bone disks out of Cow bones, and then 
gluing the disks into a solid blanks for my turnings. sorta like making bone 
Plywood. It take more time to make the blank then it dose to turn it. But 
the results are very nice.
Please let us know more about what you are doing.


C.A.G.

On Wednesday, February 17, 2021, 08:10:53 AM EST, anthony 
mailto:acmepi...@gmail.com> > wrote:


I read that you were considering turning some bone.
I have turned a couple of kinds of bone, this wand is made of Giraffe femur.
It is the densest bone, and has the largest cross section that I have used.
The other materials are Blackwood, Bocote, Pink Ivory, Boxwood, Verawood,
Satine, and Osage Orange.
I call it the Eveready Swiss Army Utility Wand.  Had to get the magical
batteries, the small pieces that screw into the base of the handle, by
seagull, the owls can't fly across the Atlantic, from the Eveready shop in
Diagon Alley.  The toothpick was necessary to quality for Swiss Army.
anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.


-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sunday, February 14, 2021 8:20 PM
To: Legacy ornamental mills
Subject: Looking for some new projects.


HI everyone.

I hope everyone  is well?

Its COLD in my shop, So I spent most of my day staying inside. I've been
looking for projects to play with on the Legacy and or my Lathe. On the
internet today.

I want to do some more bone turning, I have already cut out a number of bone
disks, I am looking forward to gluing them up into something that I can
turn, soon.
The problem is What should I make?
I don't like pen's!
I have already made a number of magnify glass's and other kits type of
projects.

I have gone to a number of dollar stores and hardware and thrift stores,
looking for cheaply made things that can be re-worked. but so far no luck
finding anything new.
So I thought I would ask you all.  Dose anyone know of a nice projects, that
you like to make? Family heirloom type of stuff.  Perhaps a letter opener?
or ???

Any and all ideas are welcome.

Looking forward to talking to you all more.

Have a good night.

C.A.G.




-- 
You received this me

Re: Looking for some new projects.

2021-02-18 Thread Tim Ziegler
Hey Anthony,

Just throwing my 5 cents worth in but when I got my 1200 LOM I went direct
to Legacy and spoke to Cindy.
It took a few weeks but was able to get all the gearing, indexing plates,
split nuts, misc. track nuts and the
spray for slides "Easy Glide" I think its called.
I had to spend the money but so worth it to have the complete package.
other items you just have to wait
for people to sell parts.
Hope that helps. I'm sure others answered last night at some crazy late
hours lol.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Feb 18, 2021 at 12:11 AM anthony  wrote:

> I am reproducing five balusters that have a double-start barley twist.  A
> normal double-start twist, I would usually make by hand.  These balusters
> have four flats that parallel as a transition between each bead and cove
> along the twist.  These make it very difficult to work by hand.
>
> I have gained access to a legacy 1000 mill.  Unfortunately, the travel of
> the twist is 2.25 inches.  That means that I either need a 2.25 or 9 gear;
> the latter could be used with the .25 reduction gear.  Unfortunately, the
> normal gear sets don't include either.  Not only have I never used a
> legacy
> mill, but I know little about making gears or working metal.
>
> Do you have a suggestion?
> Perhaps my previous message only reached you rather than the group as a
> whole.
>
> anthony
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
> -Original Message-
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Wednesday, February 17, 2021 7:26 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
>
>
> Very Nice Anthony!
>
> Awesome wand.
>
> Where did you find A Giraffe femur?
>
>
> What I have been doing is cutting bone disks out of Cow bones, and then
> gluing the disks into a solid blanks for my turnings. sorta like making
> bone
> Plywood. It take more time to make the blank then it dose to turn it. But
> the results are very nice.
> Please let us know more about what you are doing.
>
>
> C.A.G.
>
> On Wednesday, February 17, 2021, 08:10:53 AM EST, anthony
>  wrote:
>
>
> I read that you were considering turning some bone.
> I have turned a couple of kinds of bone, this wand is made of Giraffe
> femur.
> It is the densest bone, and has the largest cross section that I have used.
> The other materials are Blackwood, Bocote, Pink Ivory, Boxwood, Verawood,
> Satine, and Osage Orange.
> I call it the Eveready Swiss Army Utility Wand.  Had to get the magical
> batteries, the small pieces that screw into the base of the handle, by
> seagull, the owls can't fly across the Atlantic, from the Eveready shop in
> Diagon Alley.  The toothpick was necessary to quality for Swiss Army.
> anthony
>
> 
> Since humans quit looking when they think or feel they KNOW the answer,
> and the answer they decide on is so rarely correct or complete,
> It is better to decide that one doesn't know and thus never quit looking.
> 
>
> -Original Message-
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Sunday, February 14, 2021 8:20 PM
> To: Legacy ornamental mills
> Subject: Looking for some new projects.
>
>
> HI everyone.
>
> I hope everyone  is well?
>
> Its COLD in my shop, So I spent most of my day staying inside. I've been
> looking for projects to play with on the Legacy and or my Lathe. On the
> internet today.
>
> I want to do some more bone turning, I have already cut out a number of
> bone
> disks, I am looking forward to gluing them up into something that I can
> turn, soon.
> The problem is What should I make?
> I don't like pen's!
> I have already made a number of magnify glass's and other kits type of
> projects.
>
> I have gone to a number of dollar stores and hardware and thrift stores,
> looking for cheaply made things that can be re-worked. but so far no luck
> finding anything new.
> So I thought I would ask you all.  Dose anyone know of a nice projects,
> that
> you like to make? Family heirloom type of stuff.  Perhaps a letter opener?
> or ???
>
> Any and all ideas are welcome.
>
> Looking forward to talking to you all more.
>
> Have a good night.
>
> C.A.G.
>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups

Re: Looking for some new projects.

2021-02-17 Thread anthony
I am reproducing five balusters that have a double-start barley twist.  A 
normal double-start twist, I would usually make by hand.  These balusters 
have four flats that parallel as a transition between each bead and cove 
along the twist.  These make it very difficult to work by hand.


I have gained access to a legacy 1000 mill.  Unfortunately, the travel of 
the twist is 2.25 inches.  That means that I either need a 2.25 or 9 gear; 
the latter could be used with the .25 reduction gear.  Unfortunately, the 
normal gear sets don't include either.  Not only have I never used a legacy 
mill, but I know little about making gears or working metal.


Do you have a suggestion?
Perhaps my previous message only reached you rather than the group as a 
whole.


anthony

Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills

Sent: Wednesday, February 17, 2021 7:26 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



Very Nice Anthony!

Awesome wand.

Where did you find A Giraffe femur?


What I have been doing is cutting bone disks out of Cow bones, and then 
gluing the disks into a solid blanks for my turnings. sorta like making bone 
Plywood. It take more time to make the blank then it dose to turn it. But 
the results are very nice.

Please let us know more about what you are doing.


C.A.G.

On Wednesday, February 17, 2021, 08:10:53 AM EST, anthony 
 wrote:



I read that you were considering turning some bone.
I have turned a couple of kinds of bone, this wand is made of Giraffe femur.
It is the densest bone, and has the largest cross section that I have used.
The other materials are Blackwood, Bocote, Pink Ivory, Boxwood, Verawood,
Satine, and Osage Orange.
I call it the Eveready Swiss Army Utility Wand.  Had to get the magical
batteries, the small pieces that screw into the base of the handle, by
seagull, the owls can't fly across the Atlantic, from the Eveready shop in
Diagon Alley.  The toothpick was necessary to quality for Swiss Army.
anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.


-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills

Sent: Sunday, February 14, 2021 8:20 PM
To: Legacy ornamental mills
Subject: Looking for some new projects.


HI everyone.

I hope everyone  is well?

Its COLD in my shop, So I spent most of my day staying inside. I've been
looking for projects to play with on the Legacy and or my Lathe. On the
internet today.

I want to do some more bone turning, I have already cut out a number of bone
disks, I am looking forward to gluing them up into something that I can
turn, soon.
The problem is What should I make?
I don't like pen's!
I have already made a number of magnify glass's and other kits type of
projects.

I have gone to a number of dollar stores and hardware and thrift stores,
looking for cheaply made things that can be re-worked. but so far no luck
finding anything new.
So I thought I would ask you all.  Dose anyone know of a nice projects, that
you like to make? Family heirloom type of stuff.  Perhaps a letter opener?
or ???

Any and all ideas are welcome.

Looking forward to talking to you all more.

Have a good night.

C.A.G.




--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/1695017831.1379284.1613355612315%40mail.yahoo.com.

--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/7D638125656A42C6B6755FE0FA3640F0%40acmePC.





--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1814090934.1817261.1613568362123%40mail.yahoo.com. 


--
You received this message because you are subscribe

Re: Looking for some new projects.

2021-02-17 Thread anthony

I bought the femur at

Atlantic Coral Enterprise, Inc.
5000 Crescent Technical Court
St. Augustine, FL 32086
Outside FL: 1-800-624-7964
Inside FL: 904-797-7478

I have never glued bone before.  I guess that you might need to boil it 
first.  Most of the bone I have worked with has a fair amount of oil in it. 
I have had some boiled bone, it seems leached of oil, but I have never 
turned it.


I am primarily a turner.  I have turned lots of things, but lately been 
making boxes for fun and balusters and similar things for money.


anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills

Sent: Wednesday, February 17, 2021 7:26 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.



Very Nice Anthony!

Awesome wand.

Where did you find A Giraffe femur?


What I have been doing is cutting bone disks out of Cow bones, and then 
gluing the disks into a solid blanks for my turnings. sorta like making bone 
Plywood. It take more time to make the blank then it dose to turn it. But 
the results are very nice.

Please let us know more about what you are doing.


C.A.G.

On Wednesday, February 17, 2021, 08:10:53 AM EST, anthony 
 wrote:



I read that you were considering turning some bone.
I have turned a couple of kinds of bone, this wand is made of Giraffe femur.
It is the densest bone, and has the largest cross section that I have used.
The other materials are Blackwood, Bocote, Pink Ivory, Boxwood, Verawood,
Satine, and Osage Orange.
I call it the Eveready Swiss Army Utility Wand.  Had to get the magical
batteries, the small pieces that screw into the base of the handle, by
seagull, the owls can't fly across the Atlantic, from the Eveready shop in
Diagon Alley.  The toothpick was necessary to quality for Swiss Army.
anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.


-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills

Sent: Sunday, February 14, 2021 8:20 PM
To: Legacy ornamental mills
Subject: Looking for some new projects.


HI everyone.

I hope everyone  is well?

Its COLD in my shop, So I spent most of my day staying inside. I've been
looking for projects to play with on the Legacy and or my Lathe. On the
internet today.

I want to do some more bone turning, I have already cut out a number of bone
disks, I am looking forward to gluing them up into something that I can
turn, soon.
The problem is What should I make?
I don't like pen's!
I have already made a number of magnify glass's and other kits type of
projects.

I have gone to a number of dollar stores and hardware and thrift stores,
looking for cheaply made things that can be re-worked. but so far no luck
finding anything new.
So I thought I would ask you all.  Dose anyone know of a nice projects, that
you like to make? Family heirloom type of stuff.  Perhaps a letter opener?
or ???

Any and all ideas are welcome.

Looking forward to talking to you all more.

Have a good night.

C.A.G.




--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/1695017831.1379284.1613355612315%40mail.yahoo.com.

--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/7D638125656A42C6B6755FE0FA3640F0%40acmePC.





--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1814090934.1817261.1613568362123%40mail.yahoo.com. 


--
You received this message because you are subscribed to the Google Groups "Legacy 
Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on th

Re: Looking for some new projects.

2021-02-17 Thread 'Curt George' via Legacy Ornamental Mills
 Very Nice Anthony! 
Awesome wand.
Where did you find A Giraffe femur?
What I have been doing is cutting bone disks out of Cow bones, and then gluing 
the disks into a solid blanks for my turnings. sorta like making bone Plywood. 
It take more time to make the blank then it dose to turn it. But the results 
are very nice.Please let us know more about what you are doing.   
C.A.G.
On Wednesday, February 17, 2021, 08:10:53 AM EST, anthony 
 wrote:  
 
 I read that you were considering turning some bone.
I have turned a couple of kinds of bone, this wand is made of Giraffe femur. 
It is the densest bone, and has the largest cross section that I have used.
The other materials are Blackwood, Bocote, Pink Ivory, Boxwood, Verawood, 
Satine, and Osage Orange.
I call it the Eveready Swiss Army Utility Wand.  Had to get the magical 
batteries, the small pieces that screw into the base of the handle, by 
seagull, the owls can't fly across the Atlantic, from the Eveready shop in 
Diagon Alley.  The toothpick was necessary to quality for Swiss Army.
anthony


Since humans quit looking when they think or feel they KNOW the answer,
and the answer they decide on is so rarely correct or complete,
It is better to decide that one doesn't know and thus never quit looking.

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sunday, February 14, 2021 8:20 PM
To: Legacy ornamental mills
Subject: Looking for some new projects.


HI everyone.

I hope everyone  is well?

Its COLD in my shop, So I spent most of my day staying inside. I've been
looking for projects to play with on the Legacy and or my Lathe. On the 
internet today.

I want to do some more bone turning, I have already cut out a number of bone 
disks, I am looking forward to gluing them up into something that I can 
turn, soon.
The problem is What should I make?
I don't like pen's!
I have already made a number of magnify glass's and other kits type of 
projects.

I have gone to a number of dollar stores and hardware and thrift stores, 
looking for cheaply made things that can be re-worked. but so far no luck 
finding anything new.
So I thought I would ask you all.  Dose anyone know of a nice projects, that 
you like to make? Family heirloom type of stuff.  Perhaps a letter opener? 
or ???

Any and all ideas are welcome.

Looking forward to talking to you all more.

Have a good night.

C.A.G.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1695017831.1379284.1613355612315%40mail.yahoo.com.
 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/7D638125656A42C6B6755FE0FA3640F0%40acmePC.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1814090934.1817261.1613568362123%40mail.yahoo.com.


Re: Looking for some new projects.

2021-02-17 Thread Tim Ziegler
There you go. Good place for caned goods & washer and dryer too.


On Wed, Feb 17, 2021, 7:04 AM Michael Kratky  wrote:

> Basements are great for seasoning and storing wood as long as the wife
> doesn’t mind sharing the same space with her wardrobe; most weekend
> woodworkers/turners have their shops there here in the northeast not
> something I recommend due to the noise and dust but any shop is better than
> no shop especially when it’s a consistent 60-68°F.
>
>
>
>
>
> Michael Kratky
>
> Electrical Fire Underwriter Inspector and Consultant
>
> Commonwealth Electrical Inspection Services, Inc
>
> NY State Greater Capital District-Adirondack Regions
>
> 119 Riverview Road
>
> Northville, NY 12134
>
> theinspect...@roadrunner.com
>
> (518) 863-8800 ofc
>
> (518) 207-7247 mobile
>
>
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim Ziegler
> *Sent:* Wednesday, February 17, 2021 6:54 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Hey we had a heat wave here the temp only got down to -17 below. lol
>
> Basements are great. about 90 percent of them have basements in minn.
>
> We have tile around our newer addition and the older part has a stone &
> morter, topped with a
>
> couple courses of block. All the older part from the 40's. Not finished in
> old part. We do have
>
> a few streams coming through the old basement and it goes right to the
> floor drain.
>
> The new part we have a sump pump that the tiles drain into.
>
> Basements are great. But some times the single level would be better. We
> have 3 floors.
>
> upstairs, main level and Basement.
>
> Anyways a bit of the topic but 
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Wed, Feb 17, 2021 at 12:25 AM M.W.Foscue 
> wrote:
>
> Curtis - Where do you live that it is -12ºF?!
>
>
>
> Tim and others:  In Ely, Minnie-soda it is (at this moment) -22ºF - and in
> Fairbanks Alaska it is a "balmy" +10ºF for comparison!
>
> Moral here?  Move to Fairbanks!  LoL
>
>
>
> Yes - basements are GREAT - provided the water table allows them.   Like
> you said - very moderate/stable temperature year round.
>
> Mac
> --
>
> -Original Message-
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Feb 17, 2021 12:46 AM
> To: "legacy-ornamental-mills@googlegroups.com"
> Subject: Re: Looking for some new projects.
>
> Hello again everyone, this topic has taken off...
>
>
>
> First with Bill's heat.  I suggested a few years back, when he was
> re-building his house and workshop, to earth berm his house and perhaps
> even dig a basement.
>
> he said that this kind of things just were not done over there.  Earth is
> an good insulator for both hot and cold.
>
>
>
> As for me, I have a two car detached un-heated work shop, I use a radiant
> Kerosene heater.
> https://www.amazon.com/REMINGTON-REM-80-OFR-Radiant-Heating-Square/dp/B07GF9JQ1F
>  I
> very much like my heater. its not as cheap as it once was to use, but this
> heater is quite and heats the shop nicely when I am working out there. I
> normally go through appx. 50 gal per winter.
>
> For me digging another basement and earth breaming my place just isn't as
> easy in  a city environment. ;-(  But perhaps... anything can be made
> possible. ;-)
>
>
>
> Take care everyone, It's  -12 F* out tonight. Stay worm.
>
>
>
> C.A.G.
> --
>
> On Tuesday, February 16, 2021, 01:23:00 PM EST, Michael Kratky <
> krat...@roadrunner.com> wrote:
>
>
>
> Hello Timothy,
>
>
>
> Like anything in this world we are constantly repairing or upgrading, 4
> days ago it was the blower motor on the pellet stove, yesterday it was
> replacing the belts on the snow thrower, today it’s a leaky hydraulic ram
> on the tractor loader.
>
>
>
> Can’t say enough good things about the LP gas Rinnai EX 38CWP wall heater,
> super efficient, dependable, care free, has 2 washable stainless steel mesh
> filters, a water reservoir to add necessary humidity, easy installation,
> only complaint is they keep increasing in cost my 1st one 5 years ago was
> $1200 now their close to $2200; actually have 3 of them between my 2nd
> house, my wife’s art studio and the shop.
>
>
>
> 

RE: Looking for some new projects.

2021-02-17 Thread Michael Kratky
Basements are great for seasoning and storing wood as long as the wife doesn’t 
mind sharing the same space with her wardrobe; most weekend woodworkers/turners 
have their shops there here in the northeast not something I recommend due to 
the noise and dust but any shop is better than no shop especially when it’s a 
consistent 60-68°F.

 

 

Michael Kratky

Electrical Fire Underwriter Inspector and Consultant 

Commonwealth Electrical Inspection Services, Inc 

NY State Greater Capital District-Adirondack Regions

119 Riverview Road

Northville, NY 12134

theinspect...@roadrunner.com

(518) 863-8800 ofc

(518) 207-7247 mobile

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Ziegler
Sent: Wednesday, February 17, 2021 6:54 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

Hey we had a heat wave here the temp only got down to -17 below. lol

Basements are great. about 90 percent of them have basements in minn. 

We have tile around our newer addition and the older part has a stone & morter, 
topped with a

couple courses of block. All the older part from the 40's. Not finished in old 
part. We do have

a few streams coming through the old basement and it goes right to the floor 
drain. 

The new part we have a sump pump that the tiles drain into. 

Basements are great. But some times the single level would be better. We have 3 
floors. 

upstairs, main level and Basement. 

Anyways a bit of the topic but  


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Feb 17, 2021 at 12:25 AM M.W.Foscue  wrote:

Curtis - Where do you live that it is -12ºF?!

 

Tim and others:  In Ely, Minnie-soda it is (at this moment) -22ºF - and in 
Fairbanks Alaska it is a "balmy" +10ºF for comparison!

Moral here?  Move to Fairbanks!  LoL

 

Yes - basements are GREAT - provided the water table allows them.   Like you 
said - very moderate/stable temperature year round.

Mac


  _  


-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills 
Sent: Feb 17, 2021 12:46 AM 
To: "legacy-ornamental-mills@googlegroups.com" 
Subject: Re: Looking for some new projects. 

Hello again everyone, this topic has taken off...

 

First with Bill's heat.  I suggested a few years back, when he was re-building 
his house and workshop, to earth berm his house and perhaps even dig a basement.

he said that this kind of things just were not done over there.  Earth is an 
good insulator for both hot and cold.

 

As for me, I have a two car detached un-heated work shop, I use a radiant 
Kerosene 
heater.https://www.amazon.com/REMINGTON-REM-80-OFR-Radiant-Heating-Square/dp/B07GF9JQ1F
 I very much like my heater. its not as cheap as it once was to use, but this 
heater is quite and heats the shop nicely when I am working out there. I 
normally go through appx. 50 gal per winter. 

For me digging another basement and earth breaming my place just isn't as easy 
in  a city environment. ;-(  But perhaps... anything can be made possible. ;-)

 

Take care everyone, It's  -12 F* out tonight. Stay worm.

 

C.A.G.


  _  


On Tuesday, February 16, 2021, 01:23:00 PM EST, Michael Kratky 
 wrote: 

 

Hello Timothy,

 

Like anything in this world we are constantly repairing or upgrading, 4 days 
ago it was the blower motor on the pellet stove, yesterday it was replacing the 
belts on the snow thrower, today it’s a leaky hydraulic ram on the tractor 
loader.

 

Can’t say enough good things about the LP gas Rinnai EX 38CWP wall heater, 
super efficient, dependable, care free, has 2 washable stainless steel mesh 
filters, a water reservoir to add necessary humidity, easy installation, only 
complaint is they keep increasing in cost my 1st one 5 years ago was $1200 now 
their close to $2200; actually have 3 of them between my 2nd house, my wife’s 
art studio and the shop. 

 

Apparently you sent your Minnesota weather to my brother in Texas, here in 
Northville, NY its 36° freezing rain with a big snow storm on its way in 2 
days. 

 

Michael


  _  


From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Ziegler
Sent: Tuesday, February 16, 2021 12:04 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

Hey Michael, 

thanks for replying back. Always interesting to hear what others are using. 

Have you ever had to put in any parts? Sounds like it works pretty well for you.

Tell me a little more about the wall unit you're using?

 

You're very welcome on the weather. I never like to keep things for myself and 
my Mom taught me to share especially 

gifts like a long winded Polar Vortex. lol. Sounds like by the weekend we may  
be out of the basement for a while. 

 

Re: Looking for some new projects.

2021-02-17 Thread Tim Ziegler
Hey we had a heat wave here the temp only got down to -17 below. lol
Basements are great. about 90 percent of them have basements in minn.
We have tile around our newer addition and the older part has a stone &
morter, topped with a
couple courses of block. All the older part from the 40's. Not finished in
old part. We do have
a few streams coming through the old basement and it goes right to the
floor drain.
The new part we have a sump pump that the tiles drain into.
Basements are great. But some times the single level would be better. We
have 3 floors.
upstairs, main level and Basement.
Anyways a bit of the topic but 
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Feb 17, 2021 at 12:25 AM M.W.Foscue  wrote:

> Curtis - Where do you live that it is -12ºF?!
>
> Tim and others:  In Ely, Minnie-soda it is (at this moment) -22ºF - and in
> Fairbanks Alaska it is a "balmy" +10ºF for comparison!
> Moral here?  Move to Fairbanks!  LoL
>
> Yes - basements are GREAT - provided the water table allows them.   Like
> you said - very moderate/stable temperature year round.
> Mac
> --
>
> -Original Message-
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Feb 17, 2021 12:46 AM
> To: "legacy-ornamental-mills@googlegroups.com"
> Subject: Re: Looking for some new projects.
>
> Hello again everyone, this topic has taken off...
>
> First with Bill's heat.  I suggested a few years back, when he was
> re-building his house and workshop, to earth berm his house and perhaps
> even dig a basement.
> he said that this kind of things just were not done over there.  Earth is
> an good insulator for both hot and cold.
>
> As for me, I have a two car detached un-heated work shop, I use a radiant
> Kerosene heater.
> https://www.amazon.com/REMINGTON-REM-80-OFR-Radiant-Heating-Square/dp/B07GF9JQ1F
>  I
> very much like my heater. its not as cheap as it once was to use, but this
> heater is quite and heats the shop nicely when I am working out there. I
> normally go through appx. 50 gal per winter.
> For me digging another basement and earth breaming my place just isn't as
> easy in  a city environment. ;-(  But perhaps... anything can be made
> possible. ;-)
>
> Take care everyone, It's  -12 F* out tonight. Stay worm.
>
> C.A.G.
> --
> On Tuesday, February 16, 2021, 01:23:00 PM EST, Michael Kratky <
> krat...@roadrunner.com> wrote:
>
> Hello Timothy,
>
>
>
> Like anything in this world we are constantly repairing or upgrading, 4
> days ago it was the blower motor on the pellet stove, yesterday it was
> replacing the belts on the snow thrower, today it’s a leaky hydraulic ram
> on the tractor loader.
>
>
>
> Can’t say enough good things about the LP gas Rinnai EX 38CWP wall
> heater, super efficient, dependable, care free, has 2 washable stainless
> steel mesh filters, a water reservoir to add necessary humidity, easy
> installation, only complaint is they keep increasing in cost my 1st one 5
> years ago was $1200 now their close to $2200; actually have 3 of them
> between my 2nd house, my wife’s art studio and the shop.
>
>
>
> Apparently you sent your Minnesota weather to my brother in Texas, here in
> Northville, NY its 36° freezing rain with a big snow storm on its way in 2
> days.
>
>
>
> Michael
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, February 16, 2021 12:04 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Hey Michael,
>
> thanks for replying back. Always interesting to hear what others are
> using.
>
> Have you ever had to put in any parts? Sounds like it works pretty well
> for you.
>
> Tell me a little more about the wall unit you're using?
>
>
>
> You're very welcome on the weather. I never like to keep things for myself
> and my Mom taught me to share especially
>
> gifts like a long winded Polar Vortex. lol. Sounds like by the weekend we
> may  be out of the basement for a while.
>
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
> --
>
> On Tue, Feb 16, 2021 at 10:27 AM Michael Kratky 
> wrote:
>
> Hi Timothy,
>
>
>
> It’s an American Harvest about 12 years old designed to burn most anything
> (but not coal), have burned corn and even cherry pits in it but now just
> wood pellets as that’s all I can find; cost me about $7.50/day to heat my
> 24

Re: Looking for some new projects.

2021-02-16 Thread M.W.Foscue
Curtis - Where do you live that it is -12ºF?!Tim and others:  In Ely, Minnie-soda it is (at this moment) -22ºF - and in Fairbanks Alaska it is a "balmy" +10ºF for comparison!Moral here?  Move to Fairbanks!  LoLYes - basements are GREAT - provided the water table allows them.   Like you said - very moderate/stable temperature year round.Mac-Original Message-
From: 'Curt George' via Legacy Ornamental Mills 
Sent: Feb 17, 2021 12:46 AM
To: "legacy-ornamental-mills@googlegroups.com" 
Subject: Re: Looking for some new projects.


Hello again everyone, this topic has taken off...First with Bill's heat.  I suggested a few years back, when he was re-building his house and workshop, to earth berm his house and perhaps even dig a basement.he said that this kind of things just were not done over there.  Earth is an good insulator for both hot and cold.As for me, I have a two car detached un-heated work shop, I use a radiant Kerosene heater.https://www.amazon.com/REMINGTON-REM-80-OFR-Radiant-Heating-Square/dp/B07GF9JQ1F I very much like my heater. its not as cheap as it once was to use, but this heater is quite and heats the shop nicely when I am working out there. I normally go through appx. 50 gal per winter. For me digging another basement and earth breaming my place just isn't as easy in  a city environment. ;-(  But perhaps... anything can be made possible. ;-)Take care everyone, It's  -12 F* out tonight. Stay worm.C.A.G.





On Tuesday, February 16, 2021, 01:23:00 PM EST, Michael Kratky  wrote:



Hello Timothy,  Like anything in this world we are constantly repairing or upgrading, 4 days ago it was the blower motor on the pellet stove, yesterday it was replacing the belts on the snow thrower, today it’s a leaky hydraulic ram on the tractor loader.  Can’t say enough good things about the LP gas Rinnai EX 38CWP wall heater, super efficient, dependable, care free, has 2 washable stainless steel mesh filters, a water reservoir to add necessary humidity, easy installation, only complaint is they keep increasing in cost my 1st one 5 years ago was $1200 now their close to $2200; actually have 3 of them between my 2nd house, my wife’s art studio and the shop.   Apparently you sent your Minnesota weather to my brother in Texas, here in Northville, NY its 36° freezing rain with a big snow storm on its way in 2 days.   Michael From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim ZieglerSent: Tuesday, February 16, 2021 12:04 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Looking for some new projects.  Hey Michael, thanks for replying back. Always interesting to hear what others are using. Have you ever had to put in any parts? Sounds like it works pretty well for you.Tell me a little more about the wall unit you're using?  You're very welcome on the weather. I never like to keep things for myself and my Mom taught me to share especially gifts like a long winded Polar Vortex. lol. Sounds like by the weekend we may  be out of the basement for a while.   Kind Regards,  Timothy J. ZieglerOn Tue, Feb 16, 2021 at 10:27 AM Michael Kratky <krat...@roadrunner.com> wrote:Hi Timothy,  It’s an American Harvest about 12 years old designed to burn most anything (but not coal), have burned corn and even cherry pits in it but now just wood pellets as that’s all I can find; cost me about $7.50/day to heat my 2400 sq ft home at a comfortable 70°F during the coldest times January, February, and March.  1200 sq ft shop is a super efficient Rinnai EX 38CWP propane wall furnace that cost me only about $2/day to heat at a constant 60°F. Thanks for send you weather my way, Michael KratkyFrom: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim ZieglerSent: Monday, February 15, 2021 10:08 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Looking for some new projects. yup what brand you Michael? Kind Regards, Timothy J. ZieglerOn Mon, Feb 15, 2021 at 7:50 AM Michael Kratky <krat...@roadrunner.com> wrote:LOL, what country we even burn food here for energy; I actually have a heating stove that’s designed to burn corn. MichaelFrom: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of bulke...@mmnet.com.auSent: Monday, February 15, 2021 8:13 AMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: Looking for some new projects. Yep I will go along with that. Now please forgive my ignorance but what is a corn boiler Here a boiler is a pot we cook food in like lobster or yabbies in, is it some sort of large heater over there? BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Tim ZieglerSent: Monday, 15 Febru

Re: Looking for some new projects.

2021-02-16 Thread 'Curt George' via Legacy Ornamental Mills
 Hello again everyone, this topic has taken off...
First with Bill's heat.  I suggested a few years back, when he was re-building 
his house and workshop, to earth berm his house and perhaps even dig a 
basement.he said that this kind of things just were not done over there.  Earth 
is an good insulator for both hot and cold.
As for me, I have a two car detached un-heated work shop, I use a radiant 
Kerosene 
heater.https://www.amazon.com/REMINGTON-REM-80-OFR-Radiant-Heating-Square/dp/B07GF9JQ1F
 I very much like my heater. its not as cheap as it once was to use, but this 
heater is quite and heats the shop nicely when I am working out there. I 
normally go through appx. 50 gal per winter. For me digging another basement 
and earth breaming my place just isn't as easy in  a city environment. ;-(  But 
perhaps... anything can be made possible. ;-)
Take care everyone, It's  -12 F* out tonight. Stay worm.
C.A.G.
On Tuesday, February 16, 2021, 01:23:00 PM EST, Michael Kratky 
 wrote:  
 
 #yiv0994437229 #yiv0994437229 -- _filtered {} _filtered {} _filtered {} 
_filtered {} _filtered {}#yiv0994437229 #yiv0994437229 
p.yiv0994437229MsoNormal, #yiv0994437229 li.yiv0994437229MsoNormal, 
#yiv0994437229 div.yiv0994437229MsoNormal 
{margin:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:New;}#yiv0994437229
 a:link, #yiv0994437229 span.yiv0994437229MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv0994437229 a:visited, #yiv0994437229 
span.yiv0994437229MsoHyperlinkFollowed 
{color:purple;text-decoration:underline;}#yiv0994437229 p 
{margin-right:0in;margin-left:0in;font-size:12.0pt;font-family:New;}#yiv0994437229
 p.yiv0994437229MsoAcetate, #yiv0994437229 li.yiv0994437229MsoAcetate, 
#yiv0994437229 div.yiv0994437229MsoAcetate 
{margin:0in;margin-bottom:.0001pt;font-size:8.0pt;}#yiv0994437229 
span.yiv0994437229BalloonTextChar {}#yiv0994437229 
span.yiv0994437229EmailStyle20 
{font-family:Sans;color:black;font-weight:normal;font-style:normal;}#yiv0994437229
 .yiv0994437229MsoChpDefault {} _filtered {}#yiv0994437229 
div.yiv0994437229WordSection1 {}#yiv0994437229 
Hello Timothy,

  

Like anything in this world we are constantly repairing or upgrading, 4 days 
ago it was the blower motor on the pellet stove, yesterday it was replacing the 
belts on the snow thrower, today it’s a leaky hydraulic ram on the tractor 
loader.

  

Can’t say enough good things about the LP gas Rinnai EX 38CWP wall heater, 
super efficient, dependable, care free, has 2 washable stainless steel mesh 
filters, a water reservoir to add necessary humidity, easy installation, only 
complaint is they keep increasing in cost my 1st one 5 years ago was $1200 now 
their close to $2200; actually have 3 of them between my 2nd house, my wife’s 
art studio and the shop. 

  

Apparently you sent your Minnesota weather to my brother in Texas, here in 
Northville, NY its 36° freezing rain with a big snow storm on its way in 2 
days. 

  

Michael

  

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Ziegler
Sent: Tuesday, February 16, 2021 12:04 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

  

Hey Michael, 

thanks for replying back. Always interesting to hear what others are using. 

Have you ever had to put in any parts? Sounds like it works pretty well for you.

Tell me a little more about the wall unit you're using?

  

You're very welcome on the weather. I never like to keep things for myself and 
my Mom taught me to share especially 

gifts like a long winded Polar Vortex. lol. Sounds like by the weekend we may  
be out of the basement for a while. 

  




Kind Regards,

  

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

  

320-294-5798 shop

320-630-2243 cell

  

  

On Tue, Feb 16, 2021 at 10:27 AM Michael Kratky  wrote:


Hi Timothy, 

 

It’s an American Harvest about 12 years old designed to burn most anything (but 
not coal), have burned corn and even cherry pits in it but now just wood 
pellets as that’s all I can find; cost me about $7.50/day to heat my 2400 sq ft 
home at a comfortable 70°F during the coldest times January, February, and 
March. 

 

1200 sq ft shop is a super efficient Rinnai EX 38CWP propane wall furnace that 
cost me only about $2/day to heat at a constant 60°F.

 

Thanks for send you weather my way,

 

Michael Kratky

Electrical Fire Underwriter Inspector and Consultant 

Commonwealth Electrical Inspection Services, Inc 

NY State Greater Capital District-Adirondack Regions

119 Riverview Road

Northville, NY 12134

theinspect...@roadrunner.com

(518) 863-8800 ofc

(518) 207-7247 mobile

 

 

 

 

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Ziegler
Sent: Monday, February 15, 2021 10:08 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some

RE: Looking for some new projects.

2021-02-16 Thread Michael Kratky
Hello Timothy,

 

Like anything in this world we are constantly repairing or upgrading, 4 days 
ago it was the blower motor on the pellet stove, yesterday it was replacing the 
belts on the snow thrower, today it’s a leaky hydraulic ram on the tractor 
loader.

 

Can’t say enough good things about the LP gas Rinnai EX 38CWP wall heater, 
super efficient, dependable, care free, has 2 washable stainless steel mesh 
filters, a water reservoir to add necessary humidity, easy installation, only 
complaint is they keep increasing in cost my 1st one 5 years ago was $1200 now 
their close to $2200; actually have 3 of them between my 2nd house, my wife’s 
art studio and the shop. 

 

Apparently you sent your Minnesota weather to my brother in Texas, here in 
Northville, NY its 36° freezing rain with a big snow storm on its way in 2 
days. 

 

Michael

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Ziegler
Sent: Tuesday, February 16, 2021 12:04 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

Hey Michael, 

thanks for replying back. Always interesting to hear what others are using. 

Have you ever had to put in any parts? Sounds like it works pretty well for you.

Tell me a little more about the wall unit you're using?

 

You're very welcome on the weather. I never like to keep things for myself and 
my Mom taught me to share especially 

gifts like a long winded Polar Vortex. lol. Sounds like by the weekend we may  
be out of the basement for a while. 

 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Tue, Feb 16, 2021 at 10:27 AM Michael Kratky  wrote:

Hi Timothy, 

 

It’s an American Harvest about 12 years old designed to burn most anything (but 
not coal), have burned corn and even cherry pits in it but now just wood 
pellets as that’s all I can find; cost me about $7.50/day to heat my 2400 sq ft 
home at a comfortable 70°F during the coldest times January, February, and 
March. 

 

1200 sq ft shop is a super efficient Rinnai EX 38CWP propane wall furnace that 
cost me only about $2/day to heat at a constant 60°F.

 

Thanks for send you weather my way,

 

Michael Kratky

Electrical Fire Underwriter Inspector and Consultant 

Commonwealth Electrical Inspection Services, Inc 

NY State Greater Capital District-Adirondack Regions

119 Riverview Road

Northville, NY 12134

theinspect...@roadrunner.com

(518) 863-8800 ofc

(518) 207-7247 mobile

 

 

 

 

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Ziegler
Sent: Monday, February 15, 2021 10:08 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

yup what brand you Michael? 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Feb 15, 2021 at 7:50 AM Michael Kratky  wrote:

LOL, what country we even burn food here for energy; I actually have a heating 
stove that’s designed to burn corn.

 

Michael

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of 
bulke...@mmnet.com.au
Sent: Monday, February 15, 2021 8:13 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for some new projects.

 

Yep I will go along with that. Now please forgive my ignorance but what is a 
corn boiler

 

Here a boiler is a pot we cook food in like lobster or yabbies in, is it some 
sort of large heater over there?

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Monday, 15 February 2021 10:48 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

Lets just meet in the middle and I think we'd all be happier Bill. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Feb 15, 2021 at 1:24 AM  wrote:

I’ll trade you guys for a bit of that cold its 90 ºF  here today

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Monday, 15 February 2021 3:48 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

Tim,

I think I heard on the radio that Ely hit minus 50ºF yesterday or the day 
before!

I believe they said it was a record low temp for that date.

It ought to be very safe for you to go out ice fishing this coming week. 

Stay warm.

Mac


  _  


  _  


-Original Message- 
From: Tim Ziegler 
Sent: Feb 14, 2021 10:00 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: Re: Looking for some new projects. 

Hey Harvey hope all is well good to se

Re: Looking for some new projects.

2021-02-16 Thread Tim Ziegler
Hey Michael,
thanks for replying back. Always interesting to hear what others are using.
Have you ever had to put in any parts? Sounds like it works pretty well for
you.
Tell me a little more about the wall unit you're using?

You're very welcome on the weather. I never like to keep things for myself
and my Mom taught me to share especially
gifts like a long winded Polar Vortex. lol. Sounds like by the weekend we
may  be out of the basement for a while.


Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Feb 16, 2021 at 10:27 AM Michael Kratky 
wrote:

> Hi Timothy,
>
>
>
> It’s an American Harvest about 12 years old designed to burn most anything
> (but not coal), have burned corn and even cherry pits in it but now just
> wood pellets as that’s all I can find; cost me about $7.50/day to heat my
> 2400 sq ft home at a comfortable 70°F during the coldest times January,
> February, and March.
>
>
>
> 1200 sq ft shop is a super efficient Rinnai EX 38CWP propane wall furnace
> that cost me only about $2/day to heat at a constant 60°F.
>
>
>
> Thanks for send you weather my way,
>
>
>
> Michael Kratky
>
> Electrical Fire Underwriter Inspector and Consultant
>
> Commonwealth Electrical Inspection Services, Inc
>
> NY State Greater Capital District-Adirondack Regions
>
> 119 Riverview Road
>
> Northville, NY 12134
>
> theinspect...@roadrunner.com
>
> (518) 863-8800 ofc
>
> (518) 207-7247 mobile
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim Ziegler
> *Sent:* Monday, February 15, 2021 10:08 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> yup what brand you Michael?
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Feb 15, 2021 at 7:50 AM Michael Kratky 
> wrote:
>
> LOL, what country we even burn food here for energy; I actually have a
> heating stove that’s designed to burn corn.
>
>
>
> Michael
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *
> bulke...@mmnet.com.au
> *Sent:* Monday, February 15, 2021 8:13 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Looking for some new projects.
>
>
>
> Yep I will go along with that. Now please forgive my ignorance but what is
> a corn boiler
>
>
>
> Here a boiler is a pot we cook food in like lobster or yabbies in, is it
> some sort of large heater over there?
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, 15 February 2021 10:48 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Lets just meet in the middle and I think we'd all be happier Bill.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Feb 15, 2021 at 1:24 AM  wrote:
>
> I’ll trade you guys for a bit of that cold its 90 ºF  here today
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Monday, 15 February 2021 3:48 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Tim,
>
> I think I heard on the radio that Ely hit minus 50ºF yesterday or the day
> before!
>
> I believe they said it was a record low temp for that date.
>
> It ought to be very safe for you to go out ice fishing this coming week.
>
> Stay warm.
>
> Mac
> --
> --
>
> -Original Message-
> From: Tim Ziegler
> Sent: Feb 14, 2021 10:00 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
> Hey Harvey hope all is well good to see your still following.
>
> Suppose to hit 30 below here tonight. wow what a long cold snap.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
> -

RE: Looking for some new projects.

2021-02-16 Thread Michael Kratky
Hi Timothy, 

 

It’s an American Harvest about 12 years old designed to burn most anything (but 
not coal), have burned corn and even cherry pits in it but now just wood 
pellets as that’s all I can find; cost me about $7.50/day to heat my 2400 sq ft 
home at a comfortable 70°F during the coldest times January, February, and 
March. 

 

1200 sq ft shop is a super efficient Rinnai EX 38CWP propane wall furnace that 
cost me only about $2/day to heat at a constant 60°F.

 

Thanks for send you weather my way,

 

Michael Kratky

Electrical Fire Underwriter Inspector and Consultant 

Commonwealth Electrical Inspection Services, Inc 

NY State Greater Capital District-Adirondack Regions

119 Riverview Road

Northville, NY 12134

theinspect...@roadrunner.com

(518) 863-8800 ofc

(518) 207-7247 mobile

 

 

 

 

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Ziegler
Sent: Monday, February 15, 2021 10:08 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

yup what brand you Michael? 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Feb 15, 2021 at 7:50 AM Michael Kratky  wrote:

LOL, what country we even burn food here for energy; I actually have a heating 
stove that’s designed to burn corn.

 

Michael

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of 
bulke...@mmnet.com.au
Sent: Monday, February 15, 2021 8:13 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for some new projects.

 

Yep I will go along with that. Now please forgive my ignorance but what is a 
corn boiler

 

Here a boiler is a pot we cook food in like lobster or yabbies in, is it some 
sort of large heater over there?

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Monday, 15 February 2021 10:48 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

Lets just meet in the middle and I think we'd all be happier Bill. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Feb 15, 2021 at 1:24 AM  wrote:

I’ll trade you guys for a bit of that cold its 90 ºF  here today

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Monday, 15 February 2021 3:48 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

Tim,

I think I heard on the radio that Ely hit minus 50ºF yesterday or the day 
before!

I believe they said it was a record low temp for that date.

It ought to be very safe for you to go out ice fishing this coming week. 

Stay warm.

Mac


  _  


  _  


-Original Message- 
From: Tim Ziegler 
Sent: Feb 14, 2021 10:00 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: Re: Looking for some new projects. 

Hey Harvey hope all is well good to see your still following. 

Suppose to hit 30 below here tonight. wow what a long cold snap. 




Kind Regards,

 

Timothy J. Ziegler


  _  


On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas  wrote:

Hi Curt

 

You already probably know about this guy but here goes.

 

Projects Archives | Turning for Profit | Woodturning | Lathe | 
<https://www.turningforprofit.com/plans/> 

 

He has like a user group where  he periodically sends out emails that have 
projects in them.

 

I hope this helps, keep warm.

 

Harvey


  _  


On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills 
 wrote:

HI everyone.

 

I hope everyone  is well?

 

Its COLD in my shop, So I spent most of my day staying inside. I've been

looking for projects to play with on the Legacy and or my Lathe. On the 
internet today.

 

I want to do some more bone turning, I have already cut out a number of bone 
disks, I am looking forward to gluing them up into something that I can turn, 
soon.

The problem is What should I make?

I don't like pen's! 

I have already made a number of magnify glass's and other kits type of 
projects. 

 

I have gone to a number of dollar stores and hardware and thrift stores, 
looking for cheaply made things that can be re-worked. but so far no luck 
finding anything new.

So I thought I would ask you all.  Dose anyone know of a nice projects, that 
you like to make? Family heirloom type of stuff.  Perhaps a letter opener? or 
???

 

Any and all ideas are welcome.

 

Looking forward to talking to you all more.

 

Have a good night.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-o

Re: Looking for some new projects.

2021-02-16 Thread Tim Ziegler
Maybe a swamp cooler would be better or install a Heat pump. Heat in winter
and cool in the summer. pretty popular here in the states.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Feb 16, 2021 at 1:23 AM  wrote:

> 3 or 4 whirlybirds would help been going to get 4 of them for some time
>
>
> https://www.mitre10.com.au/windmaster-mill-vent?gclid=Cj0KCQiA1KiBBhCcARIsAPWqoSrS0BTD9oFUU5npFblKG6HHciRKUrPPAi6P5mqwJN3GYJFZfTNp1gAaArksEALw_wcB=aw.ds
>
>
>
> they let the hot air out this helps, should bring the temp down to 82 to
> 85 degrees instead of 95 to 100 as it is now. I could work at night when
> its cooler but the mosquitos would eat me alive
>
>
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Tuesday, 16 February 2021 4:57 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Looking for some new projects.
>
>
>
> Bill,
>
> Have you thought about installing a surplus military camouflage net over
> your shop roof?  That will break us the sun's rays so you get a lot less
> direct heat - while leaving the air space between the roof and the camo
> material in the netting for air to pass through - taking with it any "
> heat" trapped there.  I do not recommend putting a tarp over the shop -
> since that likely will trap a lot of the hot air - massing it between the
> roof and the tarp material.  We experience that problem with a "pop-up
> shelter called an "EZ -Up".
>
> Just a thought.  Stay cool & Safe!
>
> Mac
> ------
>
> -Original Message-
> From: bulke...@mmnet.com.au
> Sent: Feb 15, 2021 10:57 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: Looking for some new projects.
>
>
> Lol and I heat my shop with a old wood heater I made from old truck brake
> drums 
>
> Keeping it cool in summer is a much more difficult problem like today is
> just too dam hot to go in the shop
>
>
>
> Bill
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 16 February 2021 2:02 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Yea I sent him a link to the ones I actually sell. so to tye it all
> together I heat my shop, and finish room, laser room and garage with a corn
> boiler,
>
> both buildings have Legacys or Wood Chucks in them. Nice come around
> right. lol
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
> --
>
> On Mon, Feb 15, 2021 at 8:55 PM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> Bill a corn burner is very much like a pellet burner. the corn is shucked
> into small cornels, those cornels are then burned as a source of fuel.  A
> wood pellet burner works along the same lines.  When fuel runs scarce you
> need to find a new source of heat when its cold out.
>
> In the US large amounts of corn are not used for other products, (for a
> number of reasons.) burning corn that is for most context, waist products.
> in these areas, Corn is cheaper then wood, coal, or natural gas.
> https://www.youtube.com/watch?v=pYtNJCmKHjs YouTube has a lot of videos
> on this topic.
>
>
>
> Stay warm/cool EVERYONE.
>
> Now back to the Legacy topics. ;-)
>
>
>
> Thank you.
>
>
>
> C.A.G.
> --
>
> On Monday, February 15, 2021, 06:52:55 PM EST, 
> wrote:
>
>
>
> Ps flooding with lube also helps with chip removal its better than blowing
> a mess every where with air. When cutting,… wood and metal don’t go very
> well together unless you use a sacrificial piece of wood the cutting fluid
> destroys the mdf.
> --
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
> bulke...@mmnet.com.au
> *Sent:* Tuesday, 16 February 2021 9:39 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Looking for some new projects.
>
>
>
> I don’t know much about cnc cutting of aluminium but I did machine it in
> the old days when I was an engineer machinist. I do know cutting lubricant
> was paramount the best I found believe it or not was wd 40. cutting it dry
> or with only a little lubricant the aluminium would build up on the cutte

Re: Looking for some new projects.

2021-02-16 Thread Tim Ziegler
guess gear it up lol I do have access to many different gear motors if
anyone really wants to find one lol.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Feb 15, 2021 at 11:19 PM  wrote:

> Already looked at that mac the rpm is too slow lol
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Tuesday, 16 February 2021 3:54 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Curtis,
>
> Thanks for sharing.
>
> Very interesting product video.  Like Bill, I'd never heard of a corn
> kernel fired heater/boiler.  Pellet stoves - yes; corn fired? - no.
>
> I bet both Tim Z and Joe B. are going to contact that Maxim heater/boiler
> company to discuss buying a couple of those auger drive motors (540 in/lbs
> of torque!) to install on their LOMs!  Bill would too if the S weren't so
> high.
>
> LoL!
>
> Mac
> --
>
> -Original Message-
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Feb 15, 2021 9:55 PM
> To: "legacy-ornamental-mills@googlegroups.com"
> Subject: Re: Looking for some new projects.
>
> Bill a corn burner is very much like a pellet burner. the corn is shucked
> into small cornels, those cornels are then burned as a source of fuel.  A
> wood pellet burner works along the same lines.  When fuel runs scarce you
> need to find a new source of heat when its cold out.
>
> In the US large amounts of corn are not used for other products, (for a
> number of reasons.) burning corn that is for most context, waist products.
> in these areas, Corn is cheaper then wood, coal, or natural gas.
> https://www.youtube.com/watch?v=pYtNJCmKHjs YouTube has a lot of videos
> on this topic.
>
>
>
> Stay warm/cool EVERYONE.
>
> Now back to the Legacy topics. ;-)
>
>
>
> Thank you.
>
>
>
> C.A.G.
> --
>
> On Monday, February 15, 2021, 06:52:55 PM EST, 
> wrote:
>
>
>
> Ps flooding with lube also helps with chip removal its better than blowing
> a mess every where with air. When cutting,… wood and metal don’t go very
> well together unless you use a sacrificial piece of wood the cutting fluid
> destroys the mdf.
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
> bulke...@mmnet.com.au
> *Sent:* Tuesday, 16 February 2021 9:39 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Looking for some new projects.
>
>
>
> I don’t know much about cnc cutting of aluminium but I did machine it in
> the old days when I was an engineer machinist. I do know cutting lubricant
> was paramount the best I found believe it or not was wd 40. cutting it dry
> or with only a little lubricant the aluminium would build up on the cutter,
> tool or drill and cause it to jam and break, flooding the tool was the best
> it usually cut very well that way as for feed rate that depended on the cut
> light cuts you could go faster heaver cuts slower as with any machining now
> after saying all that I have never milled aluminium with a bit as small as
> 1/8 but the principle would be the same I would think.
>
> Just my 2 cents worth maybe it will help
>
>
>
> Bill
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Harvey Matyas
> *Sent:* Tuesday, 16 February 2021 2:35 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Bill
>
>
>
> I have a Shark HD3.  I was using a 1/8 inch router bit.  Before every cut,
> I used some threading oil that I placed on the Aluminum.
>
> I used my compressor to blow air at the router bit to clear chips  and
> help to cool the bit.  The chips that I created were too small, for my next
> cut, I intend to speed up
>
> the travel from 20 inch per minute to 30 or 40 inches per minute.  My
> router speed was at 10,000 rpm and I don't know if I should
>
> speed if up or not.  I'm watching a lot of videos on speeds and feeds.  * It
> creates a mess with the aluminum chips.  I plan on making like*
>
> *a 1 or 2 inch fence around the piece to try to keep the waste in one
> place.*
>
> *I was thinking about getting a mister, but after talking with someone
> familiar with cutting metal with a mister said that it creases a mess and
&

Re: Looking for some new projects.

2021-02-16 Thread Tim Ziegler
No I'm going to sell him one of mine then he can keep it all inside.
Central Boiler has to much advertising power lol.
Royall Boiler and America's Heat Biomass heat.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Feb 15, 2021 at 10:54 PM M.W.Foscue  wrote:

> Curtis,
> Thanks for sharing.
> Very interesting product video.  Like Bill, I'd never heard of a corn
> kernel fired heater/boiler.  Pellet stoves - yes; corn fired? - no.
> I bet both Tim Z and Joe B. are going to contact that Maxim heater/boiler
> company to discuss buying a couple of those auger drive motors (540 in/lbs
> of torque!) to install on their LOMs!  Bill would too if the S weren't so
> high.
> LoL!
> Mac
> --
>
> -Original Message-
> From: 'Curt George' via Legacy Ornamental Mills
> Sent: Feb 15, 2021 9:55 PM
> To: "legacy-ornamental-mills@googlegroups.com"
> Subject: Re: Looking for some new projects.
>
> Bill a corn burner is very much like a pellet burner. the corn is shucked
> into small cornels, those cornels are then burned as a source of fuel.  A
> wood pellet burner works along the same lines.  When fuel runs scarce you
> need to find a new source of heat when its cold out.
> In the US large amounts of corn are not used for other products, (for a
> number of reasons.) burning corn that is for most context, waist products.
> in these areas, Corn is cheaper then wood, coal, or natural gas.
> https://www.youtube.com/watch?v=pYtNJCmKHjs YouTube has a lot of videos
> on this topic.
>
> Stay warm/cool EVERYONE.
> Now back to the Legacy topics. ;-)
>
> Thank you.
>
> C.A.G.
> --
> On Monday, February 15, 2021, 06:52:55 PM EST, 
> wrote:
>
> Ps flooding with lube also helps with chip removal its better than blowing
> a mess every where with air. When cutting,… wood and metal don’t go very
> well together unless you use a sacrificial piece of wood the cutting fluid
> destroys the mdf.
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
> bulke...@mmnet.com.au
> *Sent:* Tuesday, 16 February 2021 9:39 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Looking for some new projects.
>
>
>
> I don’t know much about cnc cutting of aluminium but I did machine it in
> the old days when I was an engineer machinist. I do know cutting lubricant
> was paramount the best I found believe it or not was wd 40. cutting it dry
> or with only a little lubricant the aluminium would build up on the cutter,
> tool or drill and cause it to jam and break, flooding the tool was the best
> it usually cut very well that way as for feed rate that depended on the cut
> light cuts you could go faster heaver cuts slower as with any machining now
> after saying all that I have never milled aluminium with a bit as small as
> 1/8 but the principle would be the same I would think.
>
> Just my 2 cents worth maybe it will help
>
>
>
> Bill
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Harvey Matyas
> *Sent:* Tuesday, 16 February 2021 2:35 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Bill
>
>
>
> I have a Shark HD3.  I was using a 1/8 inch router bit.  Before every cut,
> I used some threading oil that I placed on the Aluminum.
>
> I used my compressor to blow air at the router bit to clear chips  and
> help to cool the bit.  The chips that I created were too small, for my next
> cut, I intend to speed up
>
> the travel from 20 inch per minute to 30 or 40 inches per minute.  My
> router speed was at 10,000 rpm and I don't know if I should
>
> speed if up or not.  I'm watching a lot of videos on speeds and feeds.  * It
> creates a mess with the aluminum chips.  I plan on making like*
>
> *a 1 or 2 inch fence around the piece to try to keep the waste in one
> place.*
>
> *I was thinking about getting a mister, but after talking with someone
> familiar with cutting metal with a mister said that it creases a mess and
> not to let it hit MDF  and*
>
> *to have the place properly ventilated.  My spoilboard is MDF and my
> basement have 3 windows that I really don't open.*
>
>
>
> *Any advice on cutting aluminum would be greatly appreciated.*
>
>
>
> *Take care,*
>
>
>
> *Harvey*
> --
>
>  On Mon, Feb 15, 2021 at 7:21 AM  wrote:
>
> Harvey

Re: Looking for some new projects.

2021-02-16 Thread Tim Ziegler
Wow I can't believe it can ever be too hot to be in the shop Bill.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Feb 15, 2021 at 9:57 PM  wrote:

> Lol and I heat my shop with a old wood heater I made from old truck brake
> drums 
>
> Keeping it cool in summer is a much more difficult problem like today is
> just too dam hot to go in the shop
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 16 February 2021 2:02 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Yea I sent him a link to the ones I actually sell. so to tye it all
> together I heat my shop, and finish room, laser room and garage with a corn
> boiler,
>
> both buildings have Legacys or Wood Chucks in them. Nice come around
> right. lol
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Feb 15, 2021 at 8:55 PM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> Bill a corn burner is very much like a pellet burner. the corn is shucked
> into small cornels, those cornels are then burned as a source of fuel.  A
> wood pellet burner works along the same lines.  When fuel runs scarce you
> need to find a new source of heat when its cold out.
>
> In the US large amounts of corn are not used for other products, (for a
> number of reasons.) burning corn that is for most context, waist products.
> in these areas, Corn is cheaper then wood, coal, or natural gas.
> https://www.youtube.com/watch?v=pYtNJCmKHjs YouTube has a lot of videos
> on this topic.
>
>
>
>
>
> Stay warm/cool EVERYONE.
>
> Now back to the Legacy topics. ;-)
>
>
>
> Thank you.
>
>
>
> C.A.G.
>
>
>
> On Monday, February 15, 2021, 06:52:55 PM EST, 
> wrote:
>
>
>
>
>
> Ps flooding with lube also helps with chip removal its better than blowing
> a mess every where with air. When cutting,… wood and metal don’t go very
> well together unless you use a sacrificial piece of wood the cutting fluid
> destroys the mdf.
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
> bulke...@mmnet.com.au
> *Sent:* Tuesday, 16 February 2021 9:39 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Looking for some new projects.
>
>
>
> I don’t know much about cnc cutting of aluminium but I did machine it in
> the old days when I was an engineer machinist. I do know cutting lubricant
> was paramount the best I found believe it or not was wd 40. cutting it dry
> or with only a little lubricant the aluminium would build up on the cutter,
> tool or drill and cause it to jam and break, flooding the tool was the best
> it usually cut very well that way as for feed rate that depended on the cut
> light cuts you could go faster heaver cuts slower as with any machining now
> after saying all that I have never milled aluminium with a bit as small as
> 1/8 but the principle would be the same I would think.
>
> Just my 2 cents worth maybe it will help
>
>
>
> Bill
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Harvey Matyas
> *Sent:* Tuesday, 16 February 2021 2:35 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Bill
>
>
>
> I have a Shark HD3.  I was using a 1/8 inch router bit.  Before every cut,
> I used some threading oil that I placed on the Aluminum.
>
> I used my compressor to blow air at the router bit to clear chips  and
> help to cool the bit.  The chips that I created were too small, for my next
> cut, I intend to speed up
>
> the travel from 20 inch per minute to 30 or 40 inches per minute.  My
> router speed was at 10,000 rpm and I don't know if I should
>
> speed if up or not.  I'm watching a lot of videos on speeds and feeds.  * It
> creates a mess with the aluminum chips.  I plan on making like*
>
> *a 1 or 2 inch fence around the piece to try to keep the waste in one
> place.*
>
> *I was thinking about getting a mister, but after talking with someone
> familiar with cutting metal with a mister said that it creases a mess and
> not to let it hit MDF  and

Re: Looking for some new projects.

2021-02-16 Thread Tim Ziegler
let me know if I can sell you one. lol Beats cutting 20 cords of wood 4ft X
4ft X 8ft X 20 in a lot of wood. uffda.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Feb 15, 2021 at 9:45 PM  wrote:

> Thanks Tim nothing like that here with the ever rising cost of fire wood
> $120 to $150 a cubic yard or meter as we use there is a real opening for
> heaters like that here.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 16 February 2021 1:59 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Hey Bill yes shell corn that is field grown here. Much better than burning
> wood. I got sick of
>
> cutting 20 cords of wood a year. lol
>
> Also better and quicker grown then fossil fuels. Though I burn #2 heating
> oil in the house and LP in my make up air
>
> for my finish room.
>
> Here's a link and I am even a dealer for them.
>
> https://americasheat.com/
>
>
>
> check them out.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Feb 15, 2021 at 4:14 PM  wrote:
>
> Can you be more specific like burn the corn kernels or the corncob after
> the kernels are removed seems silly to burn food you can eat or sell. Corn
> is not grown very much in Australia so I don’t know anything about it, we
> grow sugar cane or wheat and other grains I have never seen corn growing I
> believe it is grown here but not anywhere near where I live.
>
>
>
> Bill
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Michael Kratky
> *Sent:* Tuesday, 16 February 2021 12:50 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Looking for some new projects.
>
>
>
> LOL, what country we even burn food here for energy; I actually have a
> heating stove that’s designed to burn corn.
>
>
>
> Michael
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [
> mailto:legacy-ornamental-mills@googlegroups.com
> ] *On Behalf Of *
> bulke...@mmnet.com.au
> *Sent:* Monday, February 15, 2021 8:13 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Looking for some new projects.
>
>
>
> Yep I will go along with that. Now please forgive my ignorance but what is
> a corn boiler
>
>
>
> Here a boiler is a pot we cook food in like lobster or yabbies in, is it
> some sort of large heater over there?
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, 15 February 2021 10:48 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Lets just meet in the middle and I think we'd all be happier Bill.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Feb 15, 2021 at 1:24 AM  wrote:
>
> I’ll trade you guys for a bit of that cold its 90 ºF  here today
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Monday, 15 February 2021 3:48 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Tim,
>
> I think I heard on the radio that Ely hit minus 50ºF yesterday or the day
> before!
>
> I believe they said it was a record low temp for that date.
>
> It ought to be very safe for you to go out ice fishing this coming week.
>
> Stay warm.
>
> Mac
> --
> --
>
> -Original Message-
> From: Tim Ziegler
> Sent: Feb 14, 2021 10:00 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
> Hey Harvey hope all is well good to see your still following.
>
> Suppose to hit 30 below here tonight. wow what a long cold snap.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
> --
>
> On Sun, Feb 14,

RE: Looking for some new projects.

2021-02-15 Thread bulkeley
3 or 4 whirlybirds would help been going to get 4 of them for some time

https://www.mitre10.com.au/windmaster-mill-vent?gclid=Cj0KCQiA1KiBBhCcARIsAPWqoSrS0BTD9oFUU5npFblKG6HHciRKUrPPAi6P5mqwJN3GYJFZfTNp1gAaArksEALw_wcB
 
<https://www.mitre10.com.au/windmaster-mill-vent?gclid=Cj0KCQiA1KiBBhCcARIsAPWqoSrS0BTD9oFUU5npFblKG6HHciRKUrPPAi6P5mqwJN3GYJFZfTNp1gAaArksEALw_wcB=aw.ds>
 =aw.ds

 

they let the hot air out this helps, should bring the temp down to 82 to 85 
degrees instead of 95 to 100 as it is now. I could work at night when its 
cooler but the mosquitos would eat me alive

 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Tuesday, 16 February 2021 4:57 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for some new projects.

 

Bill,

Have you thought about installing a surplus military camouflage net over your 
shop roof?  That will break us the sun's rays so you get a lot less direct heat 
- while leaving the air space between the roof and the camo material in the 
netting for air to pass through - taking with it any " heat" trapped there.  I 
do not recommend putting a tarp over the shop - since that likely will trap a 
lot of the hot air - massing it between the roof and the tarp material.  We 
experience that problem with a "pop-up shelter called an "EZ -Up".  

Just a thought.  Stay cool & Safe!

Mac

  _  

-Original Message- 
From: bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au>  
Sent: Feb 15, 2021 10:57 PM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: RE: Looking for some new projects. 




Lol and I heat my shop with a old wood heater I made from old truck brake drums 


Keeping it cool in summer is a much more difficult problem like today is just 
too dam hot to go in the shop

 

Bill


  _  


From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Tuesday, 16 February 2021 2:02 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Looking for some new projects.

 

Yea I sent him a link to the ones I actually sell. so to tye it all together I 
heat my shop, and finish room, laser room and garage with a corn boiler, 

both buildings have Legacys or Wood Chucks in them. Nice come around right. lol


Kind Regards,

 

Timothy J. Ziegler


  _  


On Mon, Feb 15, 2021 at 8:55 PM 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

Bill a corn burner is very much like a pellet burner. the corn is shucked into 
small cornels, those cornels are then burned as a source of fuel.  A wood 
pellet burner works along the same lines.  When fuel runs scarce you need to 
find a new source of heat when its cold out. 

In the US large amounts of corn are not used for other products, (for a number 
of reasons.) burning corn that is for most context, waist products. in these 
areas, Corn is cheaper then wood, coal, or natural gas. 
https://www.youtube.com/watch?v=pYtNJCmKHjs YouTube has a lot of videos on this 
topic.

 

Stay warm/cool EVERYONE. 

Now back to the Legacy topics. ;-)

 

Thank you.

 

C.A.G.


  _  


On Monday, February 15, 2021, 06:52:55 PM EST, mailto:bulke...@mmnet.com.au> > wrote: 

 

Ps flooding with lube also helps with chip removal its better than blowing a 
mess every where with air. When cutting,… wood and metal don’t go very well 
together unless you use a sacrificial piece of wood the cutting fluid destroys 
the mdf.


  _  






From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au> 
Sent: Tuesday, 16 February 2021 9:39 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: Looking for some new projects.

 

I don’t know much about cnc cutting of aluminium but I did machine it in the 
old days when I was an engineer machinist. I do know cutting lubricant was 
paramount the best I found believe it or not was wd 40. cutting it dry or with 
only a little lubricant the aluminium would build up on the cutter, tool or 
drill and cause it to jam and break, flooding the tool was the best it usually 
cut very well that way as for feed rate that depended on the cut light cuts you 
could go faster heaver cuts slower as with any machining now after saying all 
that I have never milled aluminium with a bit as small as 1/8 but the principle 
would be the same I would think.

Just my 2 cents worth maybe it will help 

 

Bill


  _  


From: legacy-ornamental-mills@googlegroups.com

RE: Looking for some new projects.

2021-02-15 Thread M.W.Foscue
Bill,Have you thought about installing a surplus military camouflage net over your shop roof?  That will break us the sun's rays so you get a lot less direct heat - while leaving the air space between the roof and the camo material in the netting for air to pass through - taking with it any " heat" trapped there.  I do not recommend putting a tarp over the shop - since that likely will trap a lot of the hot air - massing it between the roof and the tarp material.  We experience that problem with a "pop-up shelter called an "EZ -Up".  Just a thought.  Stay cool & Safe!Mac-Original Message-
From: bulke...@mmnet.com.au
Sent: Feb 15, 2021 10:57 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for some new projects.

Lol and I heat my shop with a old wood heater I made from old truck brake drums Keeping it cool in summer is a much more difficult problem like today is just too dam hot to go in the shop BillFrom: legacy-ornamental-mills@googlegroups.com  On Behalf Of Tim ZieglerSent: Tuesday, 16 February 2021 2:02 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Looking for some new projects. Yea I sent him a link to the ones I actually sell. so to tye it all together I heat my shop, and finish room, laser room and garage with a corn boiler, both buildings have Legacys or Wood Chucks in them. Nice come around right. lolKind Regards, Timothy J. ZieglerOn Mon, Feb 15, 2021 at 8:55 PM 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote:Bill a corn burner is very much like a pellet burner. the corn is shucked into small cornels, those cornels are then burned as a source of fuel.  A wood pellet burner works along the same lines.  When fuel runs scarce you need to find a new source of heat when its cold out. In the US large amounts of corn are not used for other products, (for a number of reasons.) burning corn that is for most context, waist products. in these areas, Corn is cheaper then wood, coal, or natural gas. https://www.youtube.com/watch?v=pYtNJCmKHjs YouTube has a lot of videos on this topic. Stay warm/cool EVERYONE. Now back to the Legacy topics. ;-) Thank you. C.A.G.On Monday, February 15, 2021, 06:52:55 PM EST, <bulke...@mmnet.com.au> wrote:  Ps flooding with lube also helps with chip removal its better than blowing a mess every where with air. When cutting,… wood and metal don’t go very well together unless you use a sacrificial piece of wood the cutting fluid destroys the mdf.From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of bulke...@mmnet.com.auSent: Tuesday, 16 February 2021 9:39 AMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: Looking for some new projects. I don’t know much about cnc cutting of aluminium but I did machine it in the old days when I was an engineer machinist. I do know cutting lubricant was paramount the best I found believe it or not was wd 40. cutting it dry or with only a little lubricant the aluminium would build up on the cutter, tool or drill and cause it to jam and break, flooding the tool was the best it usually cut very well that way as for feed rate that depended on the cut light cuts you could go faster heaver cuts slower as with any machining now after saying all that I have never milled aluminium with a bit as small as 1/8 but the principle would be the same I would think.Just my 2 cents worth maybe it will help  BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Harvey MatyasSent: Tuesday, 16 February 2021 2:35 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Looking for some new projects. Bill I have a Shark HD3.  I was using a 1/8 inch router bit.  Before every cut, I used some threading oil that I placed on the Aluminum.I used my compressor to blow air at the router bit to clear chips  and help to cool the bit.  The chips that I created were too small, for my next cut, I intend to speed upthe travel from 20 inch per minute to 30 or 40 inches per minute.  My router speed was at 10,000 rpm and I don't know if I shouldspeed if up or not.  I'm watching a lot of videos on speeds and feeds.   It creates a mess with the aluminum chips.  I plan on making likea 1 or 2 inch fence around the piece to try to keep the waste in one place.I was thinking about getting a mister, but after talking with someone familiar with cutting metal with a mister said that it creases a mess and not to let it hit MDF  andto have the place properly ventilated.  My spoilboard is MDF and my basement have 3 windows that I really don't open. Any advice on cutting aluminum would be greatly appreciated. Take care, Harvey On Mon, Feb 15, 2021 at 7:21 AM <bulke...@mmnet.com.au> wrote:Harvey may I ask what machine were you using to cut your 5 3/3 circle  BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com

RE: Looking for some new projects.

2021-02-15 Thread M.W.Foscue
Bill,You ought to talk to Tim about becoming a "Dealer" for his product "Down Under" if you think there's a market for it.To compare the price you gave for fire wood - here in the mid-Atlantic area of the USA (North Carolina, Virginia, & Maryland) a cord of fire wood runs between US $150 to $250 (max of $350?).  A cord is a "legally defined" volume quantity - neatly (tightly?) stacked to a size/shape of 4'x4'x8'.  That totals 128 cubic feet.  Your cubic yard, for comparison, is 27 cu ft.  Put another way: it takes 4.74 of your cu yds to equal one cord.  Doing the math, and using the "expensive" cord @ US$350 - we would be paying about $74 pr cu yd.   Using the low price for the cord - $150 (usually a Spring or early Summer price.) we get our cost equivalent of about $32/cu yd.  I am sure in other parts of the US the prices (and available species) will be different.Mac-Original Message-
From: bulke...@mmnet.com.au
Sent: Feb 15, 2021 10:45 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for some new projects.

Thanks Tim nothing like that here with the ever rising cost of fire wood $120 to $150 a cubic yard or meter as we use there is a real opening for heaters like that here. BillFrom: legacy-ornamental-mills@googlegroups.com  On Behalf Of Tim ZieglerSent: Tuesday, 16 February 2021 1:59 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Looking for some new projects. Hey Bill yes shell corn that is field grown here. Much better than burning wood. I got sick of cutting 20 cords of wood a year. lol Also better and quicker grown then fossil fuels. Though I burn #2 heating oil in the house and LP in my make up airfor my finish room. Here's a link and I am even a dealer for them. https://americasheat.com/ check them out. Kind Regards, Timothy J. Ziegler On Mon, Feb 15, 2021 at 4:14 PM <bulke...@mmnet.com.au> wrote:Can you be more specific like burn the corn kernels or the corncob after the kernels are removed seems silly to burn food you can eat or sell. Corn is not grown very much in Australia so I don’t know anything about it, we grow sugar cane or wheat and other grains I have never seen corn growing I believe it is grown here but not anywhere near where I live. BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Michael KratkySent: Tuesday, 16 February 2021 12:50 AMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: Looking for some new projects. LOL, what country we even burn food here for energy; I actually have a heating stove that’s designed to burn corn. MichaelFrom: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of bulke...@mmnet.com.auSent: Monday, February 15, 2021 8:13 AMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: Looking for some new projects. Yep I will go along with that. Now please forgive my ignorance but what is a corn boiler Here a boiler is a pot we cook food in like lobster or yabbies in, is it some sort of large heater over there?BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Tim ZieglerSent: Monday, 15 February 2021 10:48 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Looking for some new projects. Lets just meet in the middle and I think we'd all be happier Bill. Kind Regards, Timothy J. ZieglerOn Mon, Feb 15, 2021 at 1:24 AM <bulke...@mmnet.com.au> wrote:I’ll trade you guys for a bit of that cold its 90 ºF  here today Bill From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.FoscueSent: Monday, 15 February 2021 3:48 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Looking for some new projects. Tim,I think I heard on the radio that Ely hit minus 50ºF yesterday or the day before!I believe they said it was a record low temp for that date.It ought to be very safe for you to go out ice fishing this coming week. Stay warm.Mac-Original Message- From: Tim Ziegler Sent: Feb 14, 2021 10:00 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Looking for some new projects. Hey Harvey hope all is well good to see your still following. Suppose to hit 30 below here tonight. wow what a long cold snap. Kind Regards, Timothy J. ZieglerOn Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas <hmatyas0...@gmail.com> wrote:Hi Curt You already probably know about this guy but here goes. Projects Archives | Turning for Profit | Woodturning | Lathe | He has like a user group where  he periodically sends out emails that have projects in them. I hope this helps, keep warm. HarveyOn Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote:HI everyone. I hope everyone  is well? Its COLD in my shop, So I spent most of my day staying inside. I've beenlooking for pr

RE: Looking for some new projects.

2021-02-15 Thread M.W.Foscue
We haven't heard anything from the "mother country" folks (Brigitte, Roger, & Richard?) in quite a while.I will pray that the Wuhan virus did not infect them.How about it folks in the UK - do ya'll have heating systems that burn pellets, corn, cherry pits, or wheat?Do you still burn coal and/or peat?  How do you heat your shop? (included that question to keep it Legacy Mill related. ;~)Mac-Original Message-
From: bulke...@mmnet.com.au
Sent: Feb 15, 2021 10:35 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for some new projects.

Thank you curt I watched it and several other videos I get it now its fan forced to make the corn kernels burn one guy recommended a mix of kernels and wood pellets.Nothing at all like that  in Australia the only burning heaters here are wood I didn’t know anything like that existed never too old to learn something new thank youBillFrom: 'Curt George' via Legacy Ornamental Mills  Sent: Tuesday, 16 February 2021 1:55 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Looking for some new projects. Bill a corn burner is very much like a pellet burner. the corn is shucked into small cornels, those cornels are then burned as a source of fuel.  A wood pellet burner works along the same lines.  When fuel runs scarce you need to find a new source of heat when its cold out. In the US large amounts of corn are not used for other products, (for a number of reasons.) burning corn that is for most context, waist products. in these areas, Corn is cheaper then wood, coal, or natural gas. https://www.youtube.com/watch?v=pYtNJCmKHjs YouTube has a lot of videos on this topic.  Stay warm/cool EVERYONE. Now back to the Legacy topics. ;-) Thank you. C.A.G.On Monday, February 15, 2021, 06:52:55 PM EST, <bulke...@mmnet.com.au> wrote:  Ps flooding with lube also helps with chip removal its better than blowing a mess every where with air. When cutting,… wood and metal don’t go very well together unless you use a sacrificial piece of wood the cutting fluid destroys the mdf.From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of bulke...@mmnet.com.auSent: Tuesday, 16 February 2021 9:39 AMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: Looking for some new projects. I don’t know much about cnc cutting of aluminium but I did machine it in the old days when I was an engineer machinist. I do know cutting lubricant was paramount the best I found believe it or not was wd 40. cutting it dry or with only a little lubricant the aluminium would build up on the cutter, tool or drill and cause it to jam and break, flooding the tool was the best it usually cut very well that way as for feed rate that depended on the cut light cuts you could go faster heaver cuts slower as with any machining now after saying all that I have never milled aluminium with a bit as small as 1/8 but the principle would be the same I would think.Just my 2 cents worth maybe it will help  BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Harvey MatyasSent: Tuesday, 16 February 2021 2:35 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Looking for some new projects. Bill I have a Shark HD3.  I was using a 1/8 inch router bit.  Before every cut, I used some threading oil that I placed on the Aluminum.I used my compressor to blow air at the router bit to clear chips  and help to cool the bit.  The chips that I created were too small, for my next cut, I intend to speed upthe travel from 20 inch per minute to 30 or 40 inches per minute.  My router speed was at 10,000 rpm and I don't know if I shouldspeed if up or not.  I'm watching a lot of videos on speeds and feeds.   It creates a mess with the aluminum chips.  I plan on making likea 1 or 2 inch fence around the piece to try to keep the waste in one place.I was thinking about getting a mister, but after talking with someone familiar with cutting metal with a mister said that it creases a mess and not to let it hit MDF  andto have the place properly ventilated.  My spoilboard is MDF and my basement have 3 windows that I really don't open. Any advice on cutting aluminum would be greatly appreciated. Take care, Harvey On Mon, Feb 15, 2021 at 7:21 AM <bulke...@mmnet.com.au> wrote:Harvey may I ask what machine were you using to cut your 5 3/3 circle  BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Tim ZieglerSent: Monday, 15 February 2021 11:39 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Looking for some new projects. Good morning Harvey, Yea great to have you here and I'm pretty sure everyone will continue to welcome all your input and presence. So with the bit slipping or what ever may have happened I was running an angle on my LOM 1200 here a week agoand my clamping failed right toward the tail end of the milling and of cou

RE: Looking for some new projects.

2021-02-15 Thread bulkeley
Already looked at that mac the rpm is too slow lol

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Tuesday, 16 February 2021 3:54 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

Curtis,

Thanks for sharing.  

Very interesting product video.  Like Bill, I'd never heard of a corn kernel 
fired heater/boiler.  Pellet stoves - yes; corn fired? - no.

I bet both Tim Z and Joe B. are going to contact that Maxim heater/boiler 
company to discuss buying a couple of those auger drive motors (540 in/lbs of 
torque!) to install on their LOMs!  Bill would too if the S weren't so high.

LoL!

Mac

  _  

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills 
Sent: Feb 15, 2021 9:55 PM 
To: "legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> " 
Subject: Re: Looking for some new projects. 

Bill a corn burner is very much like a pellet burner. the corn is shucked into 
small cornels, those cornels are then burned as a source of fuel.  A wood 
pellet burner works along the same lines.  When fuel runs scarce you need to 
find a new source of heat when its cold out. 

In the US large amounts of corn are not used for other products, (for a number 
of reasons.) burning corn that is for most context, waist products. in these 
areas, Corn is cheaper then wood, coal, or natural gas. 
https://www.youtube.com/watch?v=pYtNJCmKHjs YouTube has a lot of videos on this 
topic.

 

Stay warm/cool EVERYONE. 

Now back to the Legacy topics. ;-)

 

Thank you.

 

C.A.G.


  _  


On Monday, February 15, 2021, 06:52:55 PM EST, mailto:bulke...@mmnet.com.au> > wrote: 

 

Ps flooding with lube also helps with chip removal its better than blowing a 
mess every where with air. When cutting,… wood and metal don’t go very well 
together unless you use a sacrificial piece of wood the cutting fluid destroys 
the mdf.


  _  


From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au> 
Sent: Tuesday, 16 February 2021 9:39 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: Looking for some new projects.

 

I don’t know much about cnc cutting of aluminium but I did machine it in the 
old days when I was an engineer machinist. I do know cutting lubricant was 
paramount the best I found believe it or not was wd 40. cutting it dry or with 
only a little lubricant the aluminium would build up on the cutter, tool or 
drill and cause it to jam and break, flooding the tool was the best it usually 
cut very well that way as for feed rate that depended on the cut light cuts you 
could go faster heaver cuts slower as with any machining now after saying all 
that I have never milled aluminium with a bit as small as 1/8 but the principle 
would be the same I would think.

Just my 2 cents worth maybe it will help 

 

Bill


  _  


From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Harvey Matyas
Sent: Tuesday, 16 February 2021 2:35 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Looking for some new projects.

 

Bill

 

I have a Shark HD3.  I was using a 1/8 inch router bit.  Before every cut, I 
used some threading oil that I placed on the Aluminum.

I used my compressor to blow air at the router bit to clear chips  and help to 
cool the bit.  The chips that I created were too small, for my next cut, I 
intend to speed up

the travel from 20 inch per minute to 30 or 40 inches per minute.  My router 
speed was at 10,000 rpm and I don't know if I should

speed if up or not.  I'm watching a lot of videos on speeds and feeds.   It 
creates a mess with the aluminum chips.  I plan on making like

a 1 or 2 inch fence around the piece to try to keep the waste in one place.

I was thinking about getting a mister, but after talking with someone familiar 
with cutting metal with a mister said that it creases a mess and not to let it 
hit MDF  and

to have the place properly ventilated.  My spoilboard is MDF and my basement 
have 3 windows that I really don't open.

 

Any advice on cutting aluminum would be greatly appreciated.

 

Take care,

 

Harvey


  _  


 On Mon, Feb 15, 2021 at 7:21 AM mailto:bulke...@mmnet.com.au> > wrote:

Harvey may I ask what machine were you using to cut your 5 3/3 circle 

 

Bill


  _  


From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Monday, 15 F

Re: Looking for some new projects.

2021-02-15 Thread M.W.Foscue
Curtis,Thanks for sharing.  Very interesting product video.  Like Bill, I'd never heard of a corn kernel fired heater/boiler.  Pellet stoves - yes; corn fired? - no.I bet both Tim Z and Joe B. are going to contact that Maxim heater/boiler company to discuss buying a couple of those auger drive motors (540 in/lbs of torque!) to install on their LOMs!  Bill would too if the S weren't so high.LoL!Mac-Original Message-
From: 'Curt George' via Legacy Ornamental Mills 
Sent: Feb 15, 2021 9:55 PM
To: "legacy-ornamental-mills@googlegroups.com" 
Subject: Re: Looking for some new projects.


Bill a corn burner is very much like a pellet burner. the corn is shucked into small cornels, those cornels are then burned as a source of fuel.  A wood pellet burner works along the same lines.  When fuel runs scarce you need to find a new source of heat when its cold out. In the US large amounts of corn are not used for other products, (for a number of reasons.) burning corn that is for most context, waist products. in these areas, Corn is cheaper then wood, coal, or natural gas. https://www.youtube.com/watch?v=pYtNJCmKHjs YouTube has a lot of videos on this topic.Stay warm/cool EVERYONE. Now back to the Legacy topics. ;-)Thank you.C.A.G.





On Monday, February 15, 2021, 06:52:55 PM EST,   wrote:



Ps flooding with lube also helps with chip removal its better than blowing a mess every where with air. When cutting,… wood and metal don’t go very well together unless you use a sacrificial piece of wood the cutting fluid destroys the mdf. From: legacy-ornamental-mills@googlegroups.com  On Behalf Of bulke...@mmnet.com.auSent: Tuesday, 16 February 2021 9:39 AMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: Looking for some new projects.  I don’t know much about cnc cutting of aluminium but I did machine it in the old days when I was an engineer machinist. I do know cutting lubricant was paramount the best I found believe it or not was wd 40. cutting it dry or with only a little lubricant the aluminium would build up on the cutter, tool or drill and cause it to jam and break, flooding the tool was the best it usually cut very well that way as for feed rate that depended on the cut light cuts you could go faster heaver cuts slower as with any machining now after saying all that I have never milled aluminium with a bit as small as 1/8 but the principle would be the same I would think.Just my 2 cents worth maybe it will help   BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Harvey MatyasSent: Tuesday, 16 February 2021 2:35 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Looking for some new projects.  Bill  I have a Shark HD3.  I was using a 1/8 inch router bit.  Before every cut, I used some threading oil that I placed on the Aluminum.I used my compressor to blow air at the router bit to clear chips  and help to cool the bit.  The chips that I created were too small, for my next cut, I intend to speed upthe travel from 20 inch per minute to 30 or 40 inches per minute.  My router speed was at 10,000 rpm and I don't know if I shouldspeed if up or not.  I'm watching a lot of videos on speeds and feeds.   It creates a mess with the aluminum chips.  I plan on making likea 1 or 2 inch fence around the piece to try to keep the waste in one place.I was thinking about getting a mister, but after talking with someone familiar with cutting metal with a mister said that it creases a mess and not to let it hit MDF  andto have the place properly ventilated.  My spoilboard is MDF and my basement have 3 windows that I really don't open.  Any advice on cutting aluminum would be greatly appreciated.  Take care,  Harvey On Mon, Feb 15, 2021 at 7:21 AM <bulke...@mmnet.com.au> wrote:Harvey may I ask what machine were you using to cut your 5 3/3 circle  BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Tim ZieglerSent: Monday, 15 February 2021 11:39 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Looking for some new projects. Good morning Harvey, Yea great to have you here and I'm pretty sure everyone will continue to welcome all your input and presence. So with the bit slipping or what ever may have happened I was running an angle on my LOM 1200 here a week agoand my clamping failed right toward the tail end of the milling and of course the damage went beyond beingable to save the transition thresh hold. I wrecked the piece but not the bit. The bit vibrated so much that, that's whatcaused my problem. Sounds like yours was a little different mishap but seems this does happen from time to time. I was spinning a large 1 1/2 dia. older bit. I finished to next  transition strip on the table saw. customer needed it asap and I 

RE: Looking for some new projects.

2021-02-15 Thread bulkeley
Lol and I heat my shop with a old wood heater I made from old truck brake drums 


Keeping it cool in summer is a much more difficult problem like today is just 
too dam hot to go in the shop

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Tuesday, 16 February 2021 2:02 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

Yea I sent him a link to the ones I actually sell. so to tye it all together I 
heat my shop, and finish room, laser room and garage with a corn boiler, 

both buildings have Legacys or Wood Chucks in them. Nice come around right. lol


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Feb 15, 2021 at 8:55 PM 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

Bill a corn burner is very much like a pellet burner. the corn is shucked into 
small cornels, those cornels are then burned as a source of fuel.  A wood 
pellet burner works along the same lines.  When fuel runs scarce you need to 
find a new source of heat when its cold out. 

In the US large amounts of corn are not used for other products, (for a number 
of reasons.) burning corn that is for most context, waist products. in these 
areas, Corn is cheaper then wood, coal, or natural gas. 
https://www.youtube.com/watch?v=pYtNJCmKHjs YouTube has a lot of videos on this 
topic.

 

 

Stay warm/cool EVERYONE. 

Now back to the Legacy topics. ;-)

 

Thank you.

 

C.A.G.

 

On Monday, February 15, 2021, 06:52:55 PM EST, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

Ps flooding with lube also helps with chip removal its better than blowing a 
mess every where with air. When cutting,… wood and metal don’t go very well 
together unless you use a sacrificial piece of wood the cutting fluid destroys 
the mdf.

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au> 
Sent: Tuesday, 16 February 2021 9:39 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: Looking for some new projects.

 

I don’t know much about cnc cutting of aluminium but I did machine it in the 
old days when I was an engineer machinist. I do know cutting lubricant was 
paramount the best I found believe it or not was wd 40. cutting it dry or with 
only a little lubricant the aluminium would build up on the cutter, tool or 
drill and cause it to jam and break, flooding the tool was the best it usually 
cut very well that way as for feed rate that depended on the cut light cuts you 
could go faster heaver cuts slower as with any machining now after saying all 
that I have never milled aluminium with a bit as small as 1/8 but the principle 
would be the same I would think.

Just my 2 cents worth maybe it will help 

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Harvey Matyas
Sent: Tuesday, 16 February 2021 2:35 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Looking for some new projects.

 

Bill

 

I have a Shark HD3.  I was using a 1/8 inch router bit.  Before every cut, I 
used some threading oil that I placed on the Aluminum.

I used my compressor to blow air at the router bit to clear chips  and help to 
cool the bit.  The chips that I created were too small, for my next cut, I 
intend to speed up

the travel from 20 inch per minute to 30 or 40 inches per minute.  My router 
speed was at 10,000 rpm and I don't know if I should

speed if up or not.  I'm watching a lot of videos on speeds and feeds.   It 
creates a mess with the aluminum chips.  I plan on making like

a 1 or 2 inch fence around the piece to try to keep the waste in one place.

I was thinking about getting a mister, but after talking with someone familiar 
with cutting metal with a mister said that it creases a mess and not to let it 
hit MDF  and

to have the place properly ventilated.  My spoilboard is MDF and my basement 
have 3 windows that I really don't open.

 

Any advice on cutting aluminum would be greatly appreciated.

 

Take care,

 

Harvey

 

 

 

 

 

 

 

On Mon, Feb 15, 2021 at 7:21 AM mailto:bulke...@mmnet.com.au> > wrote:

Harvey may I ask what machine were you using to cut your 5 3/3 circle 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Monday, 15 February 2021 11:39 PM
To: legacy-ornamen

RE: Looking for some new projects.

2021-02-15 Thread bulkeley
Thanks Tim nothing like that here with the ever rising cost of fire wood $120 
to $150 a cubic yard or meter as we use there is a real opening for heaters 
like that here.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Tuesday, 16 February 2021 1:59 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

Hey Bill yes shell corn that is field grown here. Much better than burning 
wood. I got sick of 

cutting 20 cords of wood a year. lol 

Also better and quicker grown then fossil fuels. Though I burn #2 heating oil 
in the house and LP in my make up air

for my finish room. 

Here's a link and I am even a dealer for them. 

https://americasheat.com/

 

check them out. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Feb 15, 2021 at 4:14 PM mailto:bulke...@mmnet.com.au> > wrote:

Can you be more specific like burn the corn kernels or the corncob after the 
kernels are removed seems silly to burn food you can eat or sell. Corn is not 
grown very much in Australia so I don’t know anything about it, we grow sugar 
cane or wheat and other grains I have never seen corn growing I believe it is 
grown here but not anywhere near where I live.

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Michael Kratky
Sent: Tuesday, 16 February 2021 12:50 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: Looking for some new projects.

 

LOL, what country we even burn food here for energy; I actually have a heating 
stove that’s designed to burn corn.

 

Michael

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of 
bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au> 
Sent: Monday, February 15, 2021 8:13 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: Looking for some new projects.

 

Yep I will go along with that. Now please forgive my ignorance but what is a 
corn boiler

 

Here a boiler is a pot we cook food in like lobster or yabbies in, is it some 
sort of large heater over there?

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Monday, 15 February 2021 10:48 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Looking for some new projects.

 

Lets just meet in the middle and I think we'd all be happier Bill. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Feb 15, 2021 at 1:24 AM mailto:bulke...@mmnet.com.au> > wrote:

I’ll trade you guys for a bit of that cold its 90 ºF  here today

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of M.W.Foscue
Sent: Monday, 15 February 2021 3:48 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Looking for some new projects.

 

Tim,

I think I heard on the radio that Ely hit minus 50ºF yesterday or the day 
before!

I believe they said it was a record low temp for that date.

It ought to be very safe for you to go out ice fishing this coming week. 

Stay warm.

Mac


  _  


  _  


-Original Message- 
From: Tim Ziegler 
Sent: Feb 14, 2021 10:00 PM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: Re: Looking for some new projects. 

Hey Harvey hope all is well good to see your still following. 

Suppose to hit 30 below here tonight. wow what a long cold snap. 




Kind Regards,

 

Timothy J. Ziegler


  _  


On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas mailto:hmatyas0...@gmail.com> > wrote:

Hi Curt

 

You already probably know about this guy but here goes.

 

Projects Archives | Turning for Profit | Woodturning | Lathe | 
<https://www.turningforprofit.com/plans/> 

 

He has like a user group where  he periodically sends out emails that have 
projects in them.

 

I hope this helps, keep warm.

 

Harvey


  _  


On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

HI everyone.

 

I hope everyone  is well?

 

Its COLD in my shop, 

RE: Looking for some new projects.

2021-02-15 Thread bulkeley
Thank you curt I watched it and several other videos I get it now its fan 
forced to make the corn kernels burn one guy recommended a mix of kernels and 
wood pellets.

Nothing at all like that  in Australia the only burning heaters here are wood I 
didn’t know anything like that existed never too old to learn something new 
thank you

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Tuesday, 16 February 2021 1:55 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

Bill a corn burner is very much like a pellet burner. the corn is shucked into 
small cornels, those cornels are then burned as a source of fuel.  A wood 
pellet burner works along the same lines.  When fuel runs scarce you need to 
find a new source of heat when its cold out. 

In the US large amounts of corn are not used for other products, (for a number 
of reasons.) burning corn that is for most context, waist products. in these 
areas, Corn is cheaper then wood, coal, or natural gas. 
https://www.youtube.com/watch?v=pYtNJCmKHjs YouTube has a lot of videos on this 
topic.

 

 

Stay warm/cool EVERYONE. 

Now back to the Legacy topics. ;-)

 

Thank you.

 

C.A.G.

 

On Monday, February 15, 2021, 06:52:55 PM EST, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

Ps flooding with lube also helps with chip removal its better than blowing a 
mess every where with air. When cutting,… wood and metal don’t go very well 
together unless you use a sacrificial piece of wood the cutting fluid destroys 
the mdf.

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au> 
Sent: Tuesday, 16 February 2021 9:39 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: Looking for some new projects.

 

I don’t know much about cnc cutting of aluminium but I did machine it in the 
old days when I was an engineer machinist. I do know cutting lubricant was 
paramount the best I found believe it or not was wd 40. cutting it dry or with 
only a little lubricant the aluminium would build up on the cutter, tool or 
drill and cause it to jam and break, flooding the tool was the best it usually 
cut very well that way as for feed rate that depended on the cut light cuts you 
could go faster heaver cuts slower as with any machining now after saying all 
that I have never milled aluminium with a bit as small as 1/8 but the principle 
would be the same I would think.

Just my 2 cents worth maybe it will help 

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Harvey Matyas
Sent: Tuesday, 16 February 2021 2:35 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Looking for some new projects.

 

Bill

 

I have a Shark HD3.  I was using a 1/8 inch router bit.  Before every cut, I 
used some threading oil that I placed on the Aluminum.

I used my compressor to blow air at the router bit to clear chips  and help to 
cool the bit.  The chips that I created were too small, for my next cut, I 
intend to speed up

the travel from 20 inch per minute to 30 or 40 inches per minute.  My router 
speed was at 10,000 rpm and I don't know if I should

speed if up or not.  I'm watching a lot of videos on speeds and feeds.   It 
creates a mess with the aluminum chips.  I plan on making like

a 1 or 2 inch fence around the piece to try to keep the waste in one place.

I was thinking about getting a mister, but after talking with someone familiar 
with cutting metal with a mister said that it creases a mess and not to let it 
hit MDF  and

to have the place properly ventilated.  My spoilboard is MDF and my basement 
have 3 windows that I really don't open.

 

Any advice on cutting aluminum would be greatly appreciated.

 

Take care,

 

Harvey

 

 

 

 

 

 

 

On Mon, Feb 15, 2021 at 7:21 AM mailto:bulke...@mmnet.com.au> > wrote:

Harvey may I ask what machine were you using to cut your 5 3/3 circle 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Monday, 15 February 2021 11:39 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Looking for some new projects.

 

Good morning Harvey,

 

Yea great to have you here and I'm pretty sure everyone will continue to 
welcome all your input and presence. 

So with the bit slipping or what ever may have happened I was running an angle 
on my LOM 1200 here a week ago

and my clamping failed right toward

Re: Looking for some new projects.

2021-02-15 Thread Tim Ziegler
yup what brand you Michael?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Feb 15, 2021 at 7:50 AM Michael Kratky 
wrote:

> LOL, what country we even burn food here for energy; I actually have a
> heating stove that’s designed to burn corn.
>
>
>
> Michael
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *
> bulke...@mmnet.com.au
> *Sent:* Monday, February 15, 2021 8:13 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Looking for some new projects.
>
>
>
> Yep I will go along with that. Now please forgive my ignorance but what is
> a corn boiler
>
>
>
> Here a boiler is a pot we cook food in like lobster or yabbies in, is it
> some sort of large heater over there?
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, 15 February 2021 10:48 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Lets just meet in the middle and I think we'd all be happier Bill.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Feb 15, 2021 at 1:24 AM  wrote:
>
> I’ll trade you guys for a bit of that cold its 90 ºF  here today
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Monday, 15 February 2021 3:48 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Tim,
>
> I think I heard on the radio that Ely hit minus 50ºF yesterday or the day
> before!
>
> I believe they said it was a record low temp for that date.
>
> It ought to be very safe for you to go out ice fishing this coming week.
>
> Stay warm.
>
> Mac
> --
> --
>
> -Original Message-
> From: Tim Ziegler
> Sent: Feb 14, 2021 10:00 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
> Hey Harvey hope all is well good to see your still following.
>
> Suppose to hit 30 below here tonight. wow what a long cold snap.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
> --
>
> On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas 
> wrote:
>
> Hi Curt
>
>
>
> You already probably know about this guy but here goes.
>
>
>
> Projects Archives | Turning for Profit | Woodturning | Lathe |
> <https://www.turningforprofit.com/plans/>
>
>
>
> He has like a user group where  he periodically sends out emails that have
> projects in them.
>
>
>
> I hope this helps, keep warm.
>
>
>
> Harvey
> --
>
> On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> HI everyone.
>
>
>
> I hope everyone  is well?
>
>
>
> Its COLD in my shop, So I spent most of my day staying inside. I've been
>
> looking for projects to play with on the Legacy and or my Lathe. On the
> internet today.
>
>
>
> I want to do some more bone turning, I have already cut out a number of
> bone disks, I am looking forward to gluing them up into something that I
> can turn, soon.
>
> The problem is What should I make?
>
> I don't like pen's!
>
> I have already made a number of magnify glass's and other kits type of
> projects.
>
>
>
> I have gone to a number of dollar stores and hardware and thrift stores,
> looking for cheaply made things that can be re-worked. but so far no luck
> finding anything new.
>
> So I thought I would ask you all.  Dose anyone know of a nice projects,
> that you like to make? Family heirloom type of stuff.  Perhaps a letter
> opener? or ???
>
>
>
> Any and all ideas are welcome.
>
>
>
> Looking forward to talking to you all more.
>
>
>
> Have a good night.
>
>
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mil

Re: Looking for some new projects.

2021-02-15 Thread Tim Ziegler
Yea I sent him a link to the ones I actually sell. so to tye it all
together I heat my shop, and finish room, laser room and garage with a corn
boiler,
both buildings have Legacys or Wood Chucks in them. Nice come around right.
lol
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Feb 15, 2021 at 8:55 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Bill a corn burner is very much like a pellet burner. the corn is shucked
> into small cornels, those cornels are then burned as a source of fuel.  A
> wood pellet burner works along the same lines.  When fuel runs scarce you
> need to find a new source of heat when its cold out.
> In the US large amounts of corn are not used for other products, (for a
> number of reasons.) burning corn that is for most context, waist products.
> in these areas, Corn is cheaper then wood, coal, or natural gas.
> https://www.youtube.com/watch?v=pYtNJCmKHjs YouTube has a lot of videos
> on this topic.
>
>
> Stay warm/cool EVERYONE.
> Now back to the Legacy topics. ;-)
>
> Thank you.
>
> C.A.G.
>
> On Monday, February 15, 2021, 06:52:55 PM EST, 
> wrote:
>
>
> Ps flooding with lube also helps with chip removal its better than blowing
> a mess every where with air. When cutting,… wood and metal don’t go very
> well together unless you use a sacrificial piece of wood the cutting fluid
> destroys the mdf.
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
> bulke...@mmnet.com.au
> *Sent:* Tuesday, 16 February 2021 9:39 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Looking for some new projects.
>
>
>
> I don’t know much about cnc cutting of aluminium but I did machine it in
> the old days when I was an engineer machinist. I do know cutting lubricant
> was paramount the best I found believe it or not was wd 40. cutting it dry
> or with only a little lubricant the aluminium would build up on the cutter,
> tool or drill and cause it to jam and break, flooding the tool was the best
> it usually cut very well that way as for feed rate that depended on the cut
> light cuts you could go faster heaver cuts slower as with any machining now
> after saying all that I have never milled aluminium with a bit as small as
> 1/8 but the principle would be the same I would think.
>
> Just my 2 cents worth maybe it will help
>
>
>
> Bill
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Harvey Matyas
> *Sent:* Tuesday, 16 February 2021 2:35 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Bill
>
>
>
> I have a Shark HD3.  I was using a 1/8 inch router bit.  Before every cut,
> I used some threading oil that I placed on the Aluminum.
>
> I used my compressor to blow air at the router bit to clear chips  and
> help to cool the bit.  The chips that I created were too small, for my next
> cut, I intend to speed up
>
> the travel from 20 inch per minute to 30 or 40 inches per minute.  My
> router speed was at 10,000 rpm and I don't know if I should
>
> speed if up or not.  I'm watching a lot of videos on speeds and feeds.  * It
> creates a mess with the aluminum chips.  I plan on making like*
>
> *a 1 or 2 inch fence around the piece to try to keep the waste in one
> place.*
>
> *I was thinking about getting a mister, but after talking with someone
> familiar with cutting metal with a mister said that it creases a mess and
> not to let it hit MDF  and*
>
> *to have the place properly ventilated.  My spoilboard is MDF and my
> basement have 3 windows that I really don't open.*
>
>
>
> *Any advice on cutting aluminum would be greatly appreciated.*
>
>
>
> *Take care,*
>
>
>
> *Harvey*
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> On Mon, Feb 15, 2021 at 7:21 AM  wrote:
>
> Harvey may I ask what machine were you using to cut your 5 3/3 circle
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, 15 February 2021 11:39 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Good morning Harvey,
>
>
>
> Yea great to have you here and I'm pretty sure everyone will continue to
> welcome all your input and presence.
>
> So with the bit slipping or what e

Re: Looking for some new projects.

2021-02-15 Thread Tim Ziegler
Hey Bill yes shell corn that is field grown here. Much better than burning
wood. I got sick of
cutting 20 cords of wood a year. lol
Also better and quicker grown then fossil fuels. Though I burn #2 heating
oil in the house and LP in my make up air
for my finish room.
Here's a link and I am even a dealer for them.
https://americasheat.com/

check them out.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Feb 15, 2021 at 4:14 PM  wrote:

> Can you be more specific like burn the corn kernels or the corncob after
> the kernels are removed seems silly to burn food you can eat or sell. Corn
> is not grown very much in Australia so I don’t know anything about it, we
> grow sugar cane or wheat and other grains I have never seen corn growing I
> believe it is grown here but not anywhere near where I live.
>
>
>
> Bill
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Michael Kratky
> *Sent:* Tuesday, 16 February 2021 12:50 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Looking for some new projects.
>
>
>
> LOL, what country we even burn food here for energy; I actually have a
> heating stove that’s designed to burn corn.
>
>
>
> Michael
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [
> mailto:legacy-ornamental-mills@googlegroups.com
> ] *On Behalf Of *
> bulke...@mmnet.com.au
> *Sent:* Monday, February 15, 2021 8:13 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Looking for some new projects.
>
>
>
> Yep I will go along with that. Now please forgive my ignorance but what is
> a corn boiler
>
>
>
> Here a boiler is a pot we cook food in like lobster or yabbies in, is it
> some sort of large heater over there?
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, 15 February 2021 10:48 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Lets just meet in the middle and I think we'd all be happier Bill.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Feb 15, 2021 at 1:24 AM  wrote:
>
> I’ll trade you guys for a bit of that cold its 90 ºF  here today
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Monday, 15 February 2021 3:48 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Tim,
>
> I think I heard on the radio that Ely hit minus 50ºF yesterday or the day
> before!
>
> I believe they said it was a record low temp for that date.
>
> It ought to be very safe for you to go out ice fishing this coming week.
>
> Stay warm.
>
> Mac
> --
> --
>
> -Original Message-
> From: Tim Ziegler
> Sent: Feb 14, 2021 10:00 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
> Hey Harvey hope all is well good to see your still following.
>
> Suppose to hit 30 below here tonight. wow what a long cold snap.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
> --
>
> On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas 
> wrote:
>
> Hi Curt
>
>
>
> You already probably know about this guy but here goes.
>
>
>
> Projects Archives | Turning for Profit | Woodturning | Lathe |
> <https://www.turningforprofit.com/plans/>
>
>
>
> He has like a user group where  he periodically sends out emails that have
> projects in them.
>
>
>
> I hope this helps, keep warm.
>
>
>
> Harvey
> --
>
> On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> HI everyone.
>
>
>
> I hope everyone  is well?
>
>
>
> Its COLD in my shop, So I spent most of my day staying inside. I've been
>
> looking for projects to play with on the Legacy and or my Lathe. On the
> internet today.
>
>
>
> I want to do some more bone turning, I have already cut out a number of
> bone disks, I am l

Re: Looking for some new projects.

2021-02-15 Thread 'Curt George' via Legacy Ornamental Mills
 Bill a corn burner is very much like a pellet burner. the corn is shucked into 
small cornels, those cornels are then burned as a source of fuel.  A wood 
pellet burner works along the same lines.  When fuel runs scarce you need to 
find a new source of heat when its cold out. In the US large amounts of corn 
are not used for other products, (for a number of reasons.) burning corn that 
is for most context, waist products. in these areas, Corn is cheaper then wood, 
coal, or natural gas. https://www.youtube.com/watch?v=pYtNJCmKHjs YouTube has a 
lot of videos on this topic.


Stay warm/cool EVERYONE. Now back to the Legacy topics. ;-)
Thank you.
C.A.G.
On Monday, February 15, 2021, 06:52:55 PM EST,  
wrote:  
 
 #yiv9685579964 #yiv9685579964 -- _filtered {} _filtered {} _filtered 
{}#yiv9685579964 #yiv9685579964 p.yiv9685579964MsoNormal, #yiv9685579964 
li.yiv9685579964MsoNormal, #yiv9685579964 div.yiv9685579964MsoNormal 
{margin:0cm;font-size:11.0pt;font-family:sans-serif;}#yiv9685579964 a:link, 
#yiv9685579964 span.yiv9685579964MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv9685579964 
span.yiv9685579964EmailStyle21 
{font-family:sans-serif;color:windowtext;}#yiv9685579964 
.yiv9685579964MsoChpDefault {font-size:10.0pt;} _filtered {}#yiv9685579964 
div.yiv9685579964WordSection1 {}#yiv9685579964 
Ps flooding with lube also helps with chip removal its better than blowing a 
mess every where with air. When cutting,… wood and metal don’t go very well 
together unless you use a sacrificial piece of wood the cutting fluid destroys 
the mdf.

  

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Tuesday, 16 February 2021 9:39 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for some new projects.

  

I don’t know much about cnc cutting of aluminium but I did machine it in the 
old days when I was an engineer machinist. I do know cutting lubricant was 
paramount the best I found believe it or not was wd 40. cutting it dry or with 
only a little lubricant the aluminium would build up on the cutter, tool or 
drill and cause it to jam and break, flooding the tool was the best it usually 
cut very well that way as for feed rate that depended on the cut light cuts you 
could go faster heaver cuts slower as with any machining now after saying all 
that I have never milled aluminium with a bit as small as 1/8 but the principle 
would be the same I would think.

Just my 2 cents worth maybe it will help 

  

Bill

  

  

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Harvey Matyas
Sent: Tuesday, 16 February 2021 2:35 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

  

Bill

  

I have a Shark HD3.  I was using a 1/8 inch router bit.  Before every cut, I 
used some threading oil that I placed on the Aluminum.

I used my compressor to blow air at the router bit to clear chips  and help to 
cool the bit.  The chips that I created were too small, for my next cut, I 
intend to speed up

the travel from 20 inch per minute to 30 or 40 inches per minute.  My router 
speed was at 10,000 rpm and I don't know if I should

speed if up or not.  I'm watching a lot of videos on speeds and feeds.   It 
creates a mess with the aluminum chips.  I plan on making like

a 1 or 2 inch fence around the piece to try to keep the waste in one place.

I was thinking about getting a mister, but after talking with someone familiar 
with cutting metal with a mister said that it creases a mess and not to let it 
hit MDF  and

to have the place properly ventilated.  My spoilboard is MDF and my basement 
have 3 windows that I really don't open.

  

Any advice on cutting aluminum would be greatly appreciated.

  

Take care,

  

Harvey

  

  

  

  

  

  

  

On Mon, Feb 15, 2021 at 7:21 AM  wrote:


Harvey may I ask what machine were you using to cut your 5 3/3 circle 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Monday, 15 February 2021 11:39 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

Good morning Harvey,

 

Yea great to have you here and I'm pretty sure everyone will continue to 
welcome all your input and presence. 

So with the bit slipping or what ever may have happened I was running an angle 
on my LOM 1200 here a week ago

and my clamping failed right toward the tail end of the milling and of course 
the damage went beyond being

able to save the transition thresh hold. I wrecked the piece but not the bit. 
The bit vibrated so much that, that's what

caused my problem. 

Sounds like yours was a little different mishap but seems this does happen from 
time to time. I was spinning a large 

1 1/2 dia. older bit. 

I finished to next  transition strip on the table saw. customer needed it asap 
and I was't taking chances until I had

a better bit and clamping design. 




Kind Regards,

 

Timothy J

RE: Looking for some new projects.

2021-02-15 Thread bulkeley
Ps flooding with lube also helps with chip removal its better than blowing a 
mess every where with air. When cutting,… wood and metal don’t go very well 
together unless you use a sacrificial piece of wood the cutting fluid destroys 
the mdf.

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Tuesday, 16 February 2021 9:39 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for some new projects.

 

I don’t know much about cnc cutting of aluminium but I did machine it in the 
old days when I was an engineer machinist. I do know cutting lubricant was 
paramount the best I found believe it or not was wd 40. cutting it dry or with 
only a little lubricant the aluminium would build up on the cutter, tool or 
drill and cause it to jam and break, flooding the tool was the best it usually 
cut very well that way as for feed rate that depended on the cut light cuts you 
could go faster heaver cuts slower as with any machining now after saying all 
that I have never milled aluminium with a bit as small as 1/8 but the principle 
would be the same I would think.

Just my 2 cents worth maybe it will help 

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Harvey Matyas
Sent: Tuesday, 16 February 2021 2:35 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Looking for some new projects.

 

Bill

 

I have a Shark HD3.  I was using a 1/8 inch router bit.  Before every cut, I 
used some threading oil that I placed on the Aluminum.

I used my compressor to blow air at the router bit to clear chips  and help to 
cool the bit.  The chips that I created were too small, for my next cut, I 
intend to speed up

the travel from 20 inch per minute to 30 or 40 inches per minute.  My router 
speed was at 10,000 rpm and I don't know if I should

speed if up or not.  I'm watching a lot of videos on speeds and feeds.   It 
creates a mess with the aluminum chips.  I plan on making like

a 1 or 2 inch fence around the piece to try to keep the waste in one place.

I was thinking about getting a mister, but after talking with someone familiar 
with cutting metal with a mister said that it creases a mess and not to let it 
hit MDF  and

to have the place properly ventilated.  My spoilboard is MDF and my basement 
have 3 windows that I really don't open.

 

Any advice on cutting aluminum would be greatly appreciated.

 

Take care,

 

Harvey

 

 

 

 

 

 

 

On Mon, Feb 15, 2021 at 7:21 AM mailto:bulke...@mmnet.com.au> > wrote:

Harvey may I ask what machine were you using to cut your 5 3/3 circle 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Monday, 15 February 2021 11:39 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Looking for some new projects.

 

Good morning Harvey,

 

Yea great to have you here and I'm pretty sure everyone will continue to 
welcome all your input and presence. 

So with the bit slipping or what ever may have happened I was running an angle 
on my LOM 1200 here a week ago

and my clamping failed right toward the tail end of the milling and of course 
the damage went beyond being

able to save the transition thresh hold. I wrecked the piece but not the bit. 
The bit vibrated so much that, that's what

caused my problem. 

Sounds like yours was a little different mishap but seems this does happen from 
time to time. I was spinning a large 

1 1/2 dia. older bit. 

I finished to next  transition strip on the table saw. customer needed it asap 
and I was't taking chances until I had

a better bit and clamping design. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sun, Feb 14, 2021 at 9:34 PM Harvey Matyas mailto:hmatyas0...@gmail.com> > wrote:

Hi Tim

 

I hope to follow this group as long as they will let me.

I know the weather is a pain, I went into my workshop and walked out again,  It 
was that cold in the basement.

Someone approached me to cut some aluminum for him.  On a test piece, I broke 2 
1/8 inch bits before I

finally started getting it cut through.  Looking at what happened, I was 
cutting conservatively.  I was cutting a 5 3/8 inch circle in 1/8 inch alum.  I 
was cutting 0.01 inches at a time.  I think when the bit broke, instead of .01 
I went .1 inches.  I can't check, but I think this happened because the first 
45 degrees was cut through, the rest took about 10 more tries.  Either that or 
the bit dropped down and started cutting that deep. 

 

If I cut the circl

RE: Looking for some new projects.

2021-02-15 Thread bulkeley
I don’t know much about cnc cutting of aluminium but I did machine it in the 
old days when I was an engineer machinist. I do know cutting lubricant was 
paramount the best I found believe it or not was wd 40. cutting it dry or with 
only a little lubricant the aluminium would build up on the cutter, tool or 
drill and cause it to jam and break, flooding the tool was the best it usually 
cut very well that way as for feed rate that depended on the cut light cuts you 
could go faster heaver cuts slower as with any machining now after saying all 
that I have never milled aluminium with a bit as small as 1/8 but the principle 
would be the same I would think.

Just my 2 cents worth maybe it will help 

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Harvey Matyas
Sent: Tuesday, 16 February 2021 2:35 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

Bill

 

I have a Shark HD3.  I was using a 1/8 inch router bit.  Before every cut, I 
used some threading oil that I placed on the Aluminum.

I used my compressor to blow air at the router bit to clear chips  and help to 
cool the bit.  The chips that I created were too small, for my next cut, I 
intend to speed up

the travel from 20 inch per minute to 30 or 40 inches per minute.  My router 
speed was at 10,000 rpm and I don't know if I should

speed if up or not.  I'm watching a lot of videos on speeds and feeds.   It 
creates a mess with the aluminum chips.  I plan on making like

a 1 or 2 inch fence around the piece to try to keep the waste in one place.

I was thinking about getting a mister, but after talking with someone familiar 
with cutting metal with a mister said that it creases a mess and not to let it 
hit MDF  and

to have the place properly ventilated.  My spoilboard is MDF and my basement 
have 3 windows that I really don't open.

 

Any advice on cutting aluminum would be greatly appreciated.

 

Take care,

 

Harvey

 

 

 

 

 

 

 

On Mon, Feb 15, 2021 at 7:21 AM mailto:bulke...@mmnet.com.au> > wrote:

Harvey may I ask what machine were you using to cut your 5 3/3 circle 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Monday, 15 February 2021 11:39 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Looking for some new projects.

 

Good morning Harvey,

 

Yea great to have you here and I'm pretty sure everyone will continue to 
welcome all your input and presence. 

So with the bit slipping or what ever may have happened I was running an angle 
on my LOM 1200 here a week ago

and my clamping failed right toward the tail end of the milling and of course 
the damage went beyond being

able to save the transition thresh hold. I wrecked the piece but not the bit. 
The bit vibrated so much that, that's what

caused my problem. 

Sounds like yours was a little different mishap but seems this does happen from 
time to time. I was spinning a large 

1 1/2 dia. older bit. 

I finished to next  transition strip on the table saw. customer needed it asap 
and I was't taking chances until I had

a better bit and clamping design. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sun, Feb 14, 2021 at 9:34 PM Harvey Matyas mailto:hmatyas0...@gmail.com> > wrote:

Hi Tim

 

I hope to follow this group as long as they will let me.

I know the weather is a pain, I went into my workshop and walked out again,  It 
was that cold in the basement.

Someone approached me to cut some aluminum for him.  On a test piece, I broke 2 
1/8 inch bits before I

finally started getting it cut through.  Looking at what happened, I was 
cutting conservatively.  I was cutting a 5 3/8 inch circle in 1/8 inch alum.  I 
was cutting 0.01 inches at a time.  I think when the bit broke, instead of .01 
I went .1 inches.  I can't check, but I think this happened because the first 
45 degrees was cut through, the rest took about 10 more tries.  Either that or 
the bit dropped down and started cutting that deep. 

 

If I cut the circle for this guy, he may also want me to start cutting out 
signs.  He does something with fabic

 

Harvey Matyas

 

 

On Sunday, February 14, 2021, 09:00:54 PM CST, Tim Ziegler 
mailto:timjzieg...@gmail.com> > wrote: 

 

 

Hey Harvey hope all is well good to see your still following. 

Suppose to hit 30 below here tonight. wow what a long cold snap. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas mailto:hmatyas0...@gmail.com> > wrote:

Hi Curt

 

You 

RE: Looking for some new projects.

2021-02-15 Thread bulkeley
Can you be more specific like burn the corn kernels or the corncob after the 
kernels are removed seems silly to burn food you can eat or sell. Corn is not 
grown very much in Australia so I don’t know anything about it, we grow sugar 
cane or wheat and other grains I have never seen corn growing I believe it is 
grown here but not anywhere near where I live.

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Michael Kratky
Sent: Tuesday, 16 February 2021 12:50 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for some new projects.

 

LOL, what country we even burn food here for energy; I actually have a heating 
stove that’s designed to burn corn.

 

Michael

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of 
bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au> 
Sent: Monday, February 15, 2021 8:13 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: Looking for some new projects.

 

Yep I will go along with that. Now please forgive my ignorance but what is a 
corn boiler

 

Here a boiler is a pot we cook food in like lobster or yabbies in, is it some 
sort of large heater over there?

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Monday, 15 February 2021 10:48 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Looking for some new projects.

 

Lets just meet in the middle and I think we'd all be happier Bill. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Feb 15, 2021 at 1:24 AM mailto:bulke...@mmnet.com.au> > wrote:

I’ll trade you guys for a bit of that cold its 90 ºF  here today

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of M.W.Foscue
Sent: Monday, 15 February 2021 3:48 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Looking for some new projects.

 

Tim,

I think I heard on the radio that Ely hit minus 50ºF yesterday or the day 
before!

I believe they said it was a record low temp for that date.

It ought to be very safe for you to go out ice fishing this coming week. 

Stay warm.

Mac


  _  


  _  


-Original Message- 
From: Tim Ziegler 
Sent: Feb 14, 2021 10:00 PM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: Re: Looking for some new projects. 

Hey Harvey hope all is well good to see your still following. 

Suppose to hit 30 below here tonight. wow what a long cold snap. 




Kind Regards,

 

Timothy J. Ziegler


  _  


On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas mailto:hmatyas0...@gmail.com> > wrote:

Hi Curt

 

You already probably know about this guy but here goes.

 

Projects Archives | Turning for Profit | Woodturning | Lathe | 
<https://www.turningforprofit.com/plans/> 

 

He has like a user group where  he periodically sends out emails that have 
projects in them.

 

I hope this helps, keep warm.

 

Harvey


  _  


On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

HI everyone.

 

I hope everyone  is well?

 

Its COLD in my shop, So I spent most of my day staying inside. I've been

looking for projects to play with on the Legacy and or my Lathe. On the 
internet today.

 

I want to do some more bone turning, I have already cut out a number of bone 
disks, I am looking forward to gluing them up into something that I can turn, 
soon.

The problem is What should I make?

I don't like pen's! 

I have already made a number of magnify glass's and other kits type of 
projects. 

 

I have gone to a number of dollar stores and hardware and thrift stores, 
looking for cheaply made things that can be re-worked. but so far no luck 
finding anything new.

So I thought I would ask you all.  Dose anyone know of a nice projects, that 
you like to make? Family heirloom type of stuff.  Perhaps a letter opener? or 
???

 

Any and all ideas are welcome.

 

Looking forward to talking to you all more.

 

Have a good night.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<ma

Re: Looking for some new projects.

2021-02-15 Thread Harvey Matyas
Bill

I have a Shark HD3.  I was using a 1/8 inch router bit.  Before every cut,
I used some threading oil that I placed on the Aluminum.
I used my compressor to blow air at the router bit to clear chips  and help
to cool the bit.  The chips that I created were too small, for my next cut,
I intend to speed up
the travel from 20 inch per minute to 30 or 40 inches per minute.  My
router speed was at 10,000 rpm and I don't know if I should
speed if up or not.  I'm watching a lot of videos on speeds and feeds.  * It
creates a mess with the aluminum chips.  I plan on making like*
*a 1 or 2 inch fence around the piece to try to keep the waste in one
place.*
*I was thinking about getting a mister, but after talking with someone
familiar with cutting metal with a mister said that it creases a mess and
not to let it hit MDF  and*
*to have the place properly ventilated.  My spoilboard is MDF and my
basement have 3 windows that I really don't open.*

*Any advice on cutting aluminum would be greatly appreciated.*

*Take care,*

*Harvey*







On Mon, Feb 15, 2021 at 7:21 AM  wrote:

> Harvey may I ask what machine were you using to cut your 5 3/3 circle
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, 15 February 2021 11:39 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Good morning Harvey,
>
>
>
> Yea great to have you here and I'm pretty sure everyone will continue to
> welcome all your input and presence.
>
> So with the bit slipping or what ever may have happened I was running an
> angle on my LOM 1200 here a week ago
>
> and my clamping failed right toward the tail end of the milling and of
> course the damage went beyond being
>
> able to save the transition thresh hold. I wrecked the piece but not the
> bit. The bit vibrated so much that, that's what
>
> caused my problem.
>
> Sounds like yours was a little different mishap but seems this does happen
> from time to time. I was spinning a large
>
> 1 1/2 dia. older bit.
>
> I finished to next  transition strip on the table saw. customer needed it
> asap and I was't taking chances until I had
>
> a better bit and clamping design.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sun, Feb 14, 2021 at 9:34 PM Harvey Matyas 
> wrote:
>
> Hi Tim
>
>
>
> I hope to follow this group as long as they will let me.
>
> I know the weather is a pain, I went into my workshop and walked out
> again,  It was that cold in the basement.
>
> Someone approached me to cut some aluminum for him.  On a test piece, I
> broke 2 1/8 inch bits before I
>
> finally started getting it cut through.  Looking at what happened, I was
> cutting conservatively.  I was cutting a 5 3/8 inch circle in 1/8 inch
> alum.  I was cutting 0.01 inches at a time.  I think when the bit broke,
> instead of .01 I went .1 inches.  I can't check, but I think this happened
> because the first 45 degrees was cut through, the rest took about 10 more
> tries.  Either that or the bit dropped down and started cutting that deep.
>
>
>
> If I cut the circle for this guy, he may also want me to start cutting out
> signs.  He does something with fabic
>
>
>
> Harvey Matyas
>
>
>
>
>
> On Sunday, February 14, 2021, 09:00:54 PM CST, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
>
>
>
> Hey Harvey hope all is well good to see your still following.
>
> Suppose to hit 30 below here tonight. wow what a long cold snap.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas 
> wrote:
>
> Hi Curt
>
>
>
> You already probably know about this guy but here goes.
>
>
>
> Projects Archives | Turning for Profit | Woodturning | Lathe |
> <https://www.turningforprofit.com/plans/>
>
>
>
> He has like a user group where  he periodically sends out emails that have
> projects in them.
>
>
>
> I hope this helps, keep warm.
>
>
>
> Harvey
>
>
>
>
>
>
>
> On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> HI everyone.
>
>
>
> I hope ev

RE: Looking for some new projects.

2021-02-15 Thread Michael Kratky
LOL, what country we even burn food here for energy; I actually have a heating 
stove that’s designed to burn corn.

 

Michael

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of 
bulke...@mmnet.com.au
Sent: Monday, February 15, 2021 8:13 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for some new projects.

 

Yep I will go along with that. Now please forgive my ignorance but what is a 
corn boiler

 

Here a boiler is a pot we cook food in like lobster or yabbies in, is it some 
sort of large heater over there?

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Monday, 15 February 2021 10:48 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

Lets just meet in the middle and I think we'd all be happier Bill. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Feb 15, 2021 at 1:24 AM  wrote:

I’ll trade you guys for a bit of that cold its 90 ºF  here today

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Monday, 15 February 2021 3:48 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

Tim,

I think I heard on the radio that Ely hit minus 50ºF yesterday or the day 
before!

I believe they said it was a record low temp for that date.

It ought to be very safe for you to go out ice fishing this coming week. 

Stay warm.

Mac


  _  


  _  


-Original Message- 
From: Tim Ziegler 
Sent: Feb 14, 2021 10:00 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: Re: Looking for some new projects. 

Hey Harvey hope all is well good to see your still following. 

Suppose to hit 30 below here tonight. wow what a long cold snap. 




Kind Regards,

 

Timothy J. Ziegler


  _  


On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas  wrote:

Hi Curt

 

You already probably know about this guy but here goes.

 

Projects Archives | Turning for Profit | Woodturning | Lathe | 
<https://www.turningforprofit.com/plans/> 

 

He has like a user group where  he periodically sends out emails that have 
projects in them.

 

I hope this helps, keep warm.

 

Harvey


  _  


On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills 
 wrote:

HI everyone.

 

I hope everyone  is well?

 

Its COLD in my shop, So I spent most of my day staying inside. I've been

looking for projects to play with on the Legacy and or my Lathe. On the 
internet today.

 

I want to do some more bone turning, I have already cut out a number of bone 
disks, I am looking forward to gluing them up into something that I can turn, 
soon.

The problem is What should I make?

I don't like pen's! 

I have already made a number of magnify glass's and other kits type of 
projects. 

 

I have gone to a number of dollar stores and hardware and thrift stores, 
looking for cheaply made things that can be re-worked. but so far no luck 
finding anything new.

So I thought I would ask you all.  Dose anyone know of a nice projects, that 
you like to make? Family heirloom type of stuff.  Perhaps a letter opener? or 
???

 

Any and all ideas are welcome.

 

Looking forward to talking to you all more.

 

Have a good night.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/377426023.6870.1613364456091%40wamui-gaston.atl.sa.earthlink.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/377426023.6870.1613364456091%40wamui-gaston.atl.sa.earthlink.net?utm_medium=email_source=footer>
 .

 


 
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d7036b%249dfe9450%24d9fbbcf0%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d7036b%249dfe9450%24d9fbbcf0%24%40mmnet.com.au?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To uns

RE: Looking for some new projects.

2021-02-15 Thread bulkeley
Harvey may I ask what machine were you using to cut your 5 3/3 circle 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Monday, 15 February 2021 11:39 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

Good morning Harvey,

 

Yea great to have you here and I'm pretty sure everyone will continue to 
welcome all your input and presence. 

So with the bit slipping or what ever may have happened I was running an angle 
on my LOM 1200 here a week ago

and my clamping failed right toward the tail end of the milling and of course 
the damage went beyond being

able to save the transition thresh hold. I wrecked the piece but not the bit. 
The bit vibrated so much that, that's what

caused my problem. 

Sounds like yours was a little different mishap but seems this does happen from 
time to time. I was spinning a large 

1 1/2 dia. older bit. 

I finished to next  transition strip on the table saw. customer needed it asap 
and I was't taking chances until I had

a better bit and clamping design. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sun, Feb 14, 2021 at 9:34 PM Harvey Matyas mailto:hmatyas0...@gmail.com> > wrote:

Hi Tim

 

I hope to follow this group as long as they will let me.

I know the weather is a pain, I went into my workshop and walked out again,  It 
was that cold in the basement.

Someone approached me to cut some aluminum for him.  On a test piece, I broke 2 
1/8 inch bits before I

finally started getting it cut through.  Looking at what happened, I was 
cutting conservatively.  I was cutting a 5 3/8 inch circle in 1/8 inch alum.  I 
was cutting 0.01 inches at a time.  I think when the bit broke, instead of .01 
I went .1 inches.  I can't check, but I think this happened because the first 
45 degrees was cut through, the rest took about 10 more tries.  Either that or 
the bit dropped down and started cutting that deep. 

 

If I cut the circle for this guy, he may also want me to start cutting out 
signs.  He does something with fabic

 

Harvey Matyas

 

 

On Sunday, February 14, 2021, 09:00:54 PM CST, Tim Ziegler 
mailto:timjzieg...@gmail.com> > wrote: 

 

 

Hey Harvey hope all is well good to see your still following. 

Suppose to hit 30 below here tonight. wow what a long cold snap. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas mailto:hmatyas0...@gmail.com> > wrote:

Hi Curt

 

You already probably know about this guy but here goes.

 

Projects Archives | Turning for Profit | Woodturning | Lathe | 
<https://www.turningforprofit.com/plans/> 

 

He has like a user group where  he periodically sends out emails that have 
projects in them.

 

I hope this helps, keep warm.

 

Harvey

 

 

 

On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

HI everyone.

 

I hope everyone  is well?

 

Its COLD in my shop, So I spent most of my day staying inside. I've been

looking for projects to play with on the Legacy and or my Lathe. On the 
internet today.

 

I want to do some more bone turning, I have already cut out a number of bone 
disks, I am looking forward to gluing them up into something that I can turn, 
soon.

The problem is What should I make?

I don't like pen's! 

I have already made a number of magnify glass's and other kits type of 
projects. 

 

I have gone to a number of dollar stores and hardware and thrift stores, 
looking for cheaply made things that can be re-worked. but so far no luck 
finding anything new.

So I thought I would ask you all.  Dose anyone know of a nice projects, that 
you like to make? Family heirloom type of stuff.  Perhaps a letter opener? or 
???

 

Any and all ideas are welcome.

 

Looking forward to talking to you all more.

 

Have a good night.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1695017831.1379284.1613355612315%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1695017831.1379284.1613355612315%40mail.yahoo.com?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, 

RE: Looking for some new projects.

2021-02-15 Thread bulkeley
Yep I will go along with that. Now please forgive my ignorance but what is a 
corn boiler

 

Here a boiler is a pot we cook food in like lobster or yabbies in, is it some 
sort of large heater over there?

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Monday, 15 February 2021 10:48 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

Lets just meet in the middle and I think we'd all be happier Bill. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Feb 15, 2021 at 1:24 AM mailto:bulke...@mmnet.com.au> > wrote:

I’ll trade you guys for a bit of that cold its 90 ºF  here today

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of M.W.Foscue
Sent: Monday, 15 February 2021 3:48 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Looking for some new projects.

 

Tim,

I think I heard on the radio that Ely hit minus 50ºF yesterday or the day 
before!

I believe they said it was a record low temp for that date.

It ought to be very safe for you to go out ice fishing this coming week. 

Stay warm.

Mac


  _  


  _  


-Original Message- 
From: Tim Ziegler 
Sent: Feb 14, 2021 10:00 PM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: Re: Looking for some new projects. 

Hey Harvey hope all is well good to see your still following. 

Suppose to hit 30 below here tonight. wow what a long cold snap. 




Kind Regards,

 

Timothy J. Ziegler


  _  


On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas mailto:hmatyas0...@gmail.com> > wrote:

Hi Curt

 

You already probably know about this guy but here goes.

 

Projects Archives | Turning for Profit | Woodturning | Lathe | 
<https://www.turningforprofit.com/plans/> 

 

He has like a user group where  he periodically sends out emails that have 
projects in them.

 

I hope this helps, keep warm.

 

Harvey


  _  


On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

HI everyone.

 

I hope everyone  is well?

 

Its COLD in my shop, So I spent most of my day staying inside. I've been

looking for projects to play with on the Legacy and or my Lathe. On the 
internet today.

 

I want to do some more bone turning, I have already cut out a number of bone 
disks, I am looking forward to gluing them up into something that I can turn, 
soon.

The problem is What should I make?

I don't like pen's! 

I have already made a number of magnify glass's and other kits type of 
projects. 

 

I have gone to a number of dollar stores and hardware and thrift stores, 
looking for cheaply made things that can be re-worked. but so far no luck 
finding anything new.

So I thought I would ask you all.  Dose anyone know of a nice projects, that 
you like to make? Family heirloom type of stuff.  Perhaps a letter opener? or 
???

 

Any and all ideas are welcome.

 

Looking forward to talking to you all more.

 

Have a good night.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/377426023.6870.1613364456091%40wamui-gaston.atl.sa.earthlink.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/377426023.6870.1613364456091%40wamui-gaston.atl.sa.earthlink.net?utm_medium=email_source=footer>
 .

 


 
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d7036b%249dfe9450%24d9fbbcf0%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d7036b%249dfe9450%24d9fbbcf0%24%40mmnet.com.au?utm_medium=email_source=footer>
 .

-- 
You received this m

Re: Looking for some new projects.

2021-02-15 Thread Tim Ziegler
Good morning Harvey,

Yea great to have you here and I'm pretty sure everyone will continue to
welcome all your input and presence.
So with the bit slipping or what ever may have happened I was running an
angle on my LOM 1200 here a week ago
and my clamping failed right toward the tail end of the milling and of
course the damage went beyond being
able to save the transition thresh hold. I wrecked the piece but not the
bit. The bit vibrated so much that, that's what
caused my problem.
Sounds like yours was a little different mishap but seems this does happen
from time to time. I was spinning a large
1 1/2 dia. older bit.
I finished to next  transition strip on the table saw. customer needed it
asap and I was't taking chances until I had
a better bit and clamping design.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Feb 14, 2021 at 9:34 PM Harvey Matyas  wrote:

> Hi Tim
>
> I hope to follow this group as long as they will let me.
> I know the weather is a pain, I went into my workshop and walked out
> again,  It was that cold in the basement.
> Someone approached me to cut some aluminum for him.  On a test piece, I
> broke 2 1/8 inch bits before I
> finally started getting it cut through.  Looking at what happened, I was
> cutting conservatively.  I was cutting a 5 3/8 inch circle in 1/8 inch
> alum.  I was cutting 0.01 inches at a time.  I think when the bit broke,
> instead of .01 I went .1 inches.  I can't check, but I think this happened
> because the first 45 degrees was cut through, the rest took about 10 more
> tries.  Either that or the bit dropped down and started cutting that deep.
>
> If I cut the circle for this guy, he may also want me to start cutting out
> signs.  He does something with fabic
>
> Harvey Matyas
>
>
> On Sunday, February 14, 2021, 09:00:54 PM CST, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> Hey Harvey hope all is well good to see your still following.
> Suppose to hit 30 below here tonight. wow what a long cold snap.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas 
> wrote:
>
> Hi Curt
>
> You already probably know about this guy but here goes.
>
> Projects Archives | Turning for Profit | Woodturning | Lathe |
> 
>
> He has like a user group where  he periodically sends out emails that have
> projects in them.
>
> I hope this helps, keep warm.
>
> Harvey
>
>
>
> On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> HI everyone.
>
> I hope everyone  is well?
>
> Its COLD in my shop, So I spent most of my day staying inside. I've been
> looking for projects to play with on the Legacy and or my Lathe. On the
> internet today.
>
> I want to do some more bone turning, I have already cut out a number of
> bone disks, I am looking forward to gluing them up into something that I
> can turn, soon.
> The problem is What should I make?
> I don't like pen's!
> I have already made a number of magnify glass's and other kits type of
> projects.
>
> I have gone to a number of dollar stores and hardware and thrift stores,
> looking for cheaply made things that can be re-worked. but so far no luck
> finding anything new.
> So I thought I would ask you all.  Dose anyone know of a nice projects,
> that you like to make? Family heirloom type of stuff.  Perhaps a letter
> opener? or ???
>
> Any and all ideas are welcome.
>
> Looking forward to talking to you all more.
>
> Have a good night.
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1695017831.1379284.1613355612315%40mail.yahoo.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CADbgprV5ct%3DkbAXN3%2BV9kDGAh6afLHj3%3DwFi5YHyk%2BgS8qvq9w%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the 

Re: Looking for some new projects.

2021-02-15 Thread Tim Ziegler
Lets just meet in the middle and I think we'd all be happier Bill.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Feb 15, 2021 at 1:24 AM  wrote:

> I’ll trade you guys for a bit of that cold its 90 ºF  here today
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Monday, 15 February 2021 3:48 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Looking for some new projects.
>
>
>
> Tim,
>
> I think I heard on the radio that Ely hit minus 50ºF yesterday or the day
> before!
>
> I believe they said it was a record low temp for that date.
>
> It ought to be very safe for you to go out ice fishing this coming week.
>
> Stay warm.
>
> Mac
> --
> --
>
> -Original Message-
> From: Tim Ziegler
> Sent: Feb 14, 2021 10:00 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
> Hey Harvey hope all is well good to see your still following.
>
> Suppose to hit 30 below here tonight. wow what a long cold snap.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
> --
>
> On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas 
> wrote:
>
> Hi Curt
>
>
>
> You already probably know about this guy but here goes.
>
>
>
> Projects Archives | Turning for Profit | Woodturning | Lathe |
> <https://www.turningforprofit.com/plans/>
>
>
>
> He has like a user group where  he periodically sends out emails that have
> projects in them.
>
>
>
> I hope this helps, keep warm.
>
>
>
> Harvey
> --
>
> On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> HI everyone.
>
>
>
> I hope everyone  is well?
>
>
>
> Its COLD in my shop, So I spent most of my day staying inside. I've been
>
> looking for projects to play with on the Legacy and or my Lathe. On the
> internet today.
>
>
>
> I want to do some more bone turning, I have already cut out a number of
> bone disks, I am looking forward to gluing them up into something that I
> can turn, soon.
>
> The problem is What should I make?
>
> I don't like pen's!
>
> I have already made a number of magnify glass's and other kits type of
> projects.
>
>
>
> I have gone to a number of dollar stores and hardware and thrift stores,
> looking for cheaply made things that can be re-worked. but so far no luck
> finding anything new.
>
> So I thought I would ask you all.  Dose anyone know of a nice projects,
> that you like to make? Family heirloom type of stuff.  Perhaps a letter
> opener? or ???
>
>
>
> Any and all ideas are welcome.
>
>
>
> Looking forward to talking to you all more.
>
>
>
> Have a good night.
>
>
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/377426023.6870.1613364456091%40wamui-gaston.atl.sa.earthlink.net
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/377426023.6870.1613364456091%40wamui-gaston.atl.sa.earthlink.net?utm_medium=email_source=footer>
> .
>
>
> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>  Virus-free.
> www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
> <#m_1695680122001943597_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d7036b%249dfe9450%24d9fbbcf0%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d7036b%249dfe9450%24d9fbbcf0%24%40mmnet.com.au?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGkdyOJV%3DnBRMEECTBcCsEmSRe5PE8YVt4E76uBwmk3GQ%40mail.gmail.com.


Re: Looking for some new projects.

2021-02-15 Thread Tim Ziegler
Hey Mac,

Yes indeed should not even need any scientific equipment to determine safe
ice. Wow we've had a long one and this morning at 5:15 it was at 26 below
and dropping. Wife saw several spots on her way to work down to 30 below.
no double should be the coldest day yet.
Pushing my poor corn boiler past its comfort level for sure. Heat all my
out buildings with an America's Heat Corn Boiler. Slide a few pieces of
wood into
it yesterday to help it catch up. uda!
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Feb 14, 2021 at 10:47 PM M.W.Foscue  wrote:

> Tim,
> I think I heard on the radio that Ely hit minus 50ºF yesterday or the day
> before!
> I believe they said it was a record low temp for that date.
> It ought to be very safe for you to go out ice fishing this coming week.
> Stay warm.
> Mac
> --
> --
>
> -Original Message-
> From: Tim Ziegler
> Sent: Feb 14, 2021 10:00 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Looking for some new projects.
>
> Hey Harvey hope all is well good to see your still following.
> Suppose to hit 30 below here tonight. wow what a long cold snap.
>
> Kind Regards,
>
> Timothy J. Ziegler
> --
> On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas 
> wrote:
>
>> Hi Curt
>>
>> You already probably know about this guy but here goes.
>>
>> Projects Archives | Turning for Profit | Woodturning | Lathe |
>> <https://www.turningforprofit.com/plans/>
>>
>> He has like a user group where  he periodically sends out emails that
>> have projects in them.
>>
>> I hope this helps, keep warm.
>>
>> Harvey
>> --
>> On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills
>>  wrote:
>>
>>> HI everyone.
>>>
>>> I hope everyone  is well?
>>>
>>> Its COLD in my shop, So I spent most of my day staying inside. I've been
>>> looking for projects to play with on the Legacy and or my Lathe. On the
>>> internet today.
>>>
>>> I want to do some more bone turning, I have already cut out a number of
>>> bone disks, I am looking forward to gluing them up into something that I
>>> can turn, soon.
>>> The problem is What should I make?
>>> I don't like pen's!
>>> I have already made a number of magnify glass's and other kits type of
>>> projects.
>>>
>>> I have gone to a number of dollar stores and hardware and thrift stores,
>>> looking for cheaply made things that can be re-worked. but so far no luck
>>> finding anything new.
>>> So I thought I would ask you all.  Dose anyone know of a nice projects,
>>> that you like to make? Family heirloom type of stuff.  Perhaps a letter
>>> opener? or ???
>>>
>>> Any and all ideas are welcome.
>>>
>>> Looking forward to talking to you all more.
>>>
>>> Have a good night.
>>>
>>> C.A.G.
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/377426023.6870.1613364456091%40wamui-gaston.atl.sa.earthlink.net
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/377426023.6870.1613364456091%40wamui-gaston.atl.sa.earthlink.net?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEOVZkYAYHvduKmCKk8rBLRaesKg1cmQ1qtPOxLgQYTqw%40mail.gmail.com.


RE: Looking for some new projects.

2021-02-14 Thread bulkeley
I’ll trade you guys for a bit of that cold its 90 ºF  here today

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Monday, 15 February 2021 3:48 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

 

Tim,

I think I heard on the radio that Ely hit minus 50ºF yesterday or the day 
before!

I believe they said it was a record low temp for that date.

It ought to be very safe for you to go out ice fishing this coming week. 

Stay warm.

Mac

  _  

  _  

-Original Message- 
From: Tim Ziegler 
Sent: Feb 14, 2021 10:00 PM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: Re: Looking for some new projects. 

Hey Harvey hope all is well good to see your still following. 

Suppose to hit 30 below here tonight. wow what a long cold snap. 




Kind Regards,

 

Timothy J. Ziegler


  _  


On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas mailto:hmatyas0...@gmail.com> > wrote:

Hi Curt

 

You already probably know about this guy but here goes.

 

Projects Archives | Turning for Profit | Woodturning | Lathe | 
<https://www.turningforprofit.com/plans/> 

 

He has like a user group where  he periodically sends out emails that have 
projects in them.

 

I hope this helps, keep warm.

 

Harvey


  _  


On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

HI everyone.

 

I hope everyone  is well?

 

Its COLD in my shop, So I spent most of my day staying inside. I've been

looking for projects to play with on the Legacy and or my Lathe. On the 
internet today.

 

I want to do some more bone turning, I have already cut out a number of bone 
disks, I am looking forward to gluing them up into something that I can turn, 
soon.

The problem is What should I make?

I don't like pen's! 

I have already made a number of magnify glass's and other kits type of 
projects. 

 

I have gone to a number of dollar stores and hardware and thrift stores, 
looking for cheaply made things that can be re-worked. but so far no luck 
finding anything new.

So I thought I would ask you all.  Dose anyone know of a nice projects, that 
you like to make? Family heirloom type of stuff.  Perhaps a letter opener? or 
???

 

Any and all ideas are welcome.

 

Looking forward to talking to you all more.

 

Have a good night.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/377426023.6870.1613364456091%40wamui-gaston.atl.sa.earthlink.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/377426023.6870.1613364456091%40wamui-gaston.atl.sa.earthlink.net?utm_medium=email_source=footer>
 .



-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d7036b%249dfe9450%24d9fbbcf0%24%40mmnet.com.au.


Re: Looking for some new projects.

2021-02-14 Thread M.W.Foscue
Harvey,Thanks for sharing that site.  I've never seen/heard of it.Lots to look at & read on his site.  Looking forward to digging in there.Have a Wonderful week, stay warm, and have fun!Mac-Original Message-
From: Harvey Matyas 
Sent: Feb 14, 2021 9:30 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

Hi CurtYou already probably know about this guy but here goes.Projects Archives | Turning for Profit | Woodturning | Lathe |He has like a user group where  he periodically sends out emails that have projects in them.I hope this helps, keep warm.HarveyOn Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote:HI everyone.I hope everyone  is well?Its COLD in my shop, So I spent most of my day staying inside. I've beenlooking for projects to play with on the Legacy and or my Lathe. On the internet today.I want to do some more bone turning, I have already cut out a number of bone disks, I am looking forward to gluing them up into something that I can turn, soon.The problem is What should I make?I don't like pen's! I have already made a number of magnify glass's and other kits type of projects. I have gone to a number of dollar stores and hardware and thrift stores, looking for cheaply made things that can be re-worked. but so far no luck finding anything new.So I thought I would ask you all.  Dose anyone know of a nice projects, that you like to make? Family heirloom type of stuff.  Perhaps a letter opener? or ???Any and all ideas are welcome.Looking forward to talking to you all more.Have a good night.C.A.G.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/2117193857.6883.1613364852849%40wamui-gaston.atl.sa.earthlink.net.


Re: Looking for some new projects.

2021-02-14 Thread M.W.Foscue
Tim,I think I heard on the radio that Ely hit minus 50ºF yesterday or the day before!I believe they said it was a record low temp for that date.It ought to be very safe for you to go out ice fishing this coming week. Stay warm.Mac-Original Message-
From: Tim Ziegler 
Sent: Feb 14, 2021 10:00 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for some new projects.

Hey Harvey hope all is well good to see your still following. Suppose to hit 30 below here tonight. wow what a long cold snap. Kind Regards,Timothy J. ZieglerOn Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas <hmatyas0...@gmail.com> wrote:Hi CurtYou already probably know about this guy but here goes.Projects Archives | Turning for Profit | Woodturning | Lathe |He has like a user group where  he periodically sends out emails that have projects in them.I hope this helps, keep warm.HarveyOn Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote:HI everyone.I hope everyone  is well?Its COLD in my shop, So I spent most of my day staying inside. I've beenlooking for projects to play with on the Legacy and or my Lathe. On the internet today.I want to do some more bone turning, I have already cut out a number of bone disks, I am looking forward to gluing them up into something that I can turn, soon.The problem is What should I make?I don't like pen's! I have already made a number of magnify glass's and other kits type of projects. I have gone to a number of dollar stores and hardware and thrift stores, looking for cheaply made things that can be re-worked. but so far no luck finding anything new.So I thought I would ask you all.  Dose anyone know of a nice projects, that you like to make? Family heirloom type of stuff.  Perhaps a letter opener? or ???Any and all ideas are welcome.Looking forward to talking to you all more.Have a good night.C.A.G.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/377426023.6870.1613364456091%40wamui-gaston.atl.sa.earthlink.net.


Re: Looking for some new projects.

2021-02-14 Thread Harvey Matyas
Hi Tim

I hope to follow this group as long as they will let me.
I know the weather is a pain, I went into my workshop and walked out
again,  It was that cold in the basement.
Someone approached me to cut some aluminum for him.  On a test piece, I
broke 2 1/8 inch bits before I
finally started getting it cut through.  Looking at what happened, I was
cutting conservatively.  I was cutting a 5 3/8 inch circle in 1/8 inch
alum.  I was cutting 0.01 inches at a time.  I think when the bit broke,
instead of .01 I went .1 inches.  I can't check, but I think this happened
because the first 45 degrees was cut through, the rest took about 10 more
tries.  Either that or the bit dropped down and started cutting that deep.

If I cut the circle for this guy, he may also want me to start cutting out
signs.  He does something with fabic

Harvey Matyas


On Sunday, February 14, 2021, 09:00:54 PM CST, Tim Ziegler <
timjzieg...@gmail.com> wrote:


Hey Harvey hope all is well good to see your still following.
Suppose to hit 30 below here tonight. wow what a long cold snap.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas  wrote:

Hi Curt

You already probably know about this guy but here goes.

Projects Archives | Turning for Profit | Woodturning | Lathe |


He has like a user group where  he periodically sends out emails that have
projects in them.

I hope this helps, keep warm.

Harvey



On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

HI everyone.

I hope everyone  is well?

Its COLD in my shop, So I spent most of my day staying inside. I've been
looking for projects to play with on the Legacy and or my Lathe. On the
internet today.

I want to do some more bone turning, I have already cut out a number of
bone disks, I am looking forward to gluing them up into something that I
can turn, soon.
The problem is What should I make?
I don't like pen's!
I have already made a number of magnify glass's and other kits type of
projects.

I have gone to a number of dollar stores and hardware and thrift stores,
looking for cheaply made things that can be re-worked. but so far no luck
finding anything new.
So I thought I would ask you all.  Dose anyone know of a nice projects,
that you like to make? Family heirloom type of stuff.  Perhaps a letter
opener? or ???

Any and all ideas are welcome.

Looking forward to talking to you all more.

Have a good night.

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/1695017831.1379284.1613355612315%40mail.yahoo.com

.

-- 
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/CADbgprV5ct%3DkbAXN3%2BV9kDGAh6afLHj3%3DwFi5YHyk%2BgS8qvq9w%40mail.gmail.com

.

-- 
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFo4%2BfKcFqYCOkODVncUQq8JzXndEjAxMVdyvxS4ti5kQ%40mail.gmail.com

.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CADbgprVUW4_Rb-gabhN_KGc502j5BY%2BK%3Du39OyTJsipndpfAMw%40mail.gmail.com.


Re: Looking for some new projects.

2021-02-14 Thread Harvey Matyas
Hi Tim
I hope to follow this group as long as they will let me.
I know the weather is a pain, I went into my workshop today and walked out 
again,  It was that cold in the basement.
Someone approached me to cut some aluminum for him.  On a test piece, I broke 2 
1/8 inch bits before Ifinally started getting it to cut properly.  I was 
cutting conservatively.   
If I can cut the circle for this guy, he indicated that he would then want me 
to start cutting out some letters for signs.  He does something with fabric and 
wood and metal.  He does custom seating for his job.  
Take care.
Harvey 

On Sunday, February 14, 2021, 09:00:54 PM CST, Tim Ziegler 
 wrote:  
 
 Hey Harvey hope all is well good to see your still following. Suppose to hit 
30 below here tonight. wow what a long cold snap. 
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell

On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas  wrote:

Hi Curt
You already probably know about this guy but here goes.
Projects Archives | Turning for Profit | Woodturning | Lathe |

He has like a user group where  he periodically sends out emails that have 
projects in them.
I hope this helps, keep warm.
Harvey


On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills 
 wrote:

HI everyone.
I hope everyone  is well?
Its COLD in my shop, So I spent most of my day staying inside. I've beenlooking 
for projects to play with on the Legacy and or my Lathe. On the internet today.
I want to do some more bone turning, I have already cut out a number of bone 
disks, I am looking forward to gluing them up into something that I can turn, 
soon.The problem is What should I make?I don't like pen's! I have already made 
a number of magnify glass's and other kits type of projects. 
I have gone to a number of dollar stores and hardware and thrift stores, 
looking for cheaply made things that can be re-worked. but so far no luck 
finding anything new.So I thought I would ask you all.  Dose anyone know of a 
nice projects, that you like to make? Family heirloom type of stuff.  Perhaps a 
letter opener? or ???
Any and all ideas are welcome.
Looking forward to talking to you all more.
Have a good night.
C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1695017831.1379284.1613355612315%40mail.yahoo.com.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CADbgprV5ct%3DkbAXN3%2BV9kDGAh6afLHj3%3DwFi5YHyk%2BgS8qvq9w%40mail.gmail.com.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFo4%2BfKcFqYCOkODVncUQq8JzXndEjAxMVdyvxS4ti5kQ%40mail.gmail.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2024212077.1388219.1613359963640%40mail.yahoo.com.


Re: Looking for some new projects.

2021-02-14 Thread 'Curt George' via Legacy Ornamental Mills
 Its cold here too!  Not as cold, but Cold none the less... bu!
C.A.G.
On Sunday, February 14, 2021, 10:00:56 PM EST, Tim Ziegler 
 wrote:  
 
 Hey Harvey hope all is well good to see your still following. Suppose to hit 
30 below here tonight. wow what a long cold snap. 
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell

On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas  wrote:

Hi Curt
You already probably know about this guy but here goes.
Projects Archives | Turning for Profit | Woodturning | Lathe |

He has like a user group where  he periodically sends out emails that have 
projects in them.
I hope this helps, keep warm.
Harvey


On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills 
 wrote:

HI everyone.
I hope everyone  is well?
Its COLD in my shop, So I spent most of my day staying inside. I've beenlooking 
for projects to play with on the Legacy and or my Lathe. On the internet today.
I want to do some more bone turning, I have already cut out a number of bone 
disks, I am looking forward to gluing them up into something that I can turn, 
soon.The problem is What should I make?I don't like pen's! I have already made 
a number of magnify glass's and other kits type of projects. 
I have gone to a number of dollar stores and hardware and thrift stores, 
looking for cheaply made things that can be re-worked. but so far no luck 
finding anything new.So I thought I would ask you all.  Dose anyone know of a 
nice projects, that you like to make? Family heirloom type of stuff.  Perhaps a 
letter opener? or ???
Any and all ideas are welcome.
Looking forward to talking to you all more.
Have a good night.
C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1695017831.1379284.1613355612315%40mail.yahoo.com.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CADbgprV5ct%3DkbAXN3%2BV9kDGAh6afLHj3%3DwFi5YHyk%2BgS8qvq9w%40mail.gmail.com.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFo4%2BfKcFqYCOkODVncUQq8JzXndEjAxMVdyvxS4ti5kQ%40mail.gmail.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1526575582.1395742.1613359580682%40mail.yahoo.com.


Re: Looking for some new projects.

2021-02-14 Thread 'Curt George' via Legacy Ornamental Mills
 Thanks Harvey.
I have not seen him  before.
I will check it out. Thank you.
C.A.G.
On Sunday, February 14, 2021, 09:30:54 PM EST, Harvey Matyas 
 wrote:  
 
 Hi Curt
You already probably know about this guy but here goes.
Projects Archives | Turning for Profit | Woodturning | Lathe |

He has like a user group where  he periodically sends out emails that have 
projects in them.
I hope this helps, keep warm.
Harvey


On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills 
 wrote:

HI everyone.
I hope everyone  is well?
Its COLD in my shop, So I spent most of my day staying inside. I've beenlooking 
for projects to play with on the Legacy and or my Lathe. On the internet today.
I want to do some more bone turning, I have already cut out a number of bone 
disks, I am looking forward to gluing them up into something that I can turn, 
soon.The problem is What should I make?I don't like pen's! I have already made 
a number of magnify glass's and other kits type of projects. 
I have gone to a number of dollar stores and hardware and thrift stores, 
looking for cheaply made things that can be re-worked. but so far no luck 
finding anything new.So I thought I would ask you all.  Dose anyone know of a 
nice projects, that you like to make? Family heirloom type of stuff.  Perhaps a 
letter opener? or ???
Any and all ideas are welcome.
Looking forward to talking to you all more.
Have a good night.
C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1695017831.1379284.1613355612315%40mail.yahoo.com.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CADbgprV5ct%3DkbAXN3%2BV9kDGAh6afLHj3%3DwFi5YHyk%2BgS8qvq9w%40mail.gmail.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/804870550.1234536.1613359523702%40mail.yahoo.com.


Re: Looking for some new projects.

2021-02-14 Thread Tim Ziegler
Hey Harvey hope all is well good to see your still following.
Suppose to hit 30 below here tonight. wow what a long cold snap.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas  wrote:

> Hi Curt
>
> You already probably know about this guy but here goes.
>
> Projects Archives | Turning for Profit | Woodturning | Lathe |
> 
>
> He has like a user group where  he periodically sends out emails that have
> projects in them.
>
> I hope this helps, keep warm.
>
> Harvey
>
>
>
> On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
>> HI everyone.
>>
>> I hope everyone  is well?
>>
>> Its COLD in my shop, So I spent most of my day staying inside. I've been
>> looking for projects to play with on the Legacy and or my Lathe. On the
>> internet today.
>>
>> I want to do some more bone turning, I have already cut out a number of
>> bone disks, I am looking forward to gluing them up into something that I
>> can turn, soon.
>> The problem is What should I make?
>> I don't like pen's!
>> I have already made a number of magnify glass's and other kits type of
>> projects.
>>
>> I have gone to a number of dollar stores and hardware and thrift stores,
>> looking for cheaply made things that can be re-worked. but so far no luck
>> finding anything new.
>> So I thought I would ask you all.  Dose anyone know of a nice projects,
>> that you like to make? Family heirloom type of stuff.  Perhaps a letter
>> opener? or ???
>>
>> Any and all ideas are welcome.
>>
>> Looking forward to talking to you all more.
>>
>> Have a good night.
>>
>> C.A.G.
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/1695017831.1379284.1613355612315%40mail.yahoo.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CADbgprV5ct%3DkbAXN3%2BV9kDGAh6afLHj3%3DwFi5YHyk%2BgS8qvq9w%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFo4%2BfKcFqYCOkODVncUQq8JzXndEjAxMVdyvxS4ti5kQ%40mail.gmail.com.


Re: Looking for some new projects.

2021-02-14 Thread Tim Ziegler
Hey Curt,

I know the day is about gone now, so did you come up with anything?
Have you ever considered doing a Fry pan or Kettle Handle?
Hunting knives etc
Cabinet pulls?
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> HI everyone.
>
> I hope everyone  is well?
>
> Its COLD in my shop, So I spent most of my day staying inside. I've been
> looking for projects to play with on the Legacy and or my Lathe. On the
> internet today.
>
> I want to do some more bone turning, I have already cut out a number of
> bone disks, I am looking forward to gluing them up into something that I
> can turn, soon.
> The problem is What should I make?
> I don't like pen's!
> I have already made a number of magnify glass's and other kits type of
> projects.
>
> I have gone to a number of dollar stores and hardware and thrift stores,
> looking for cheaply made things that can be re-worked. but so far no luck
> finding anything new.
> So I thought I would ask you all.  Dose anyone know of a nice projects,
> that you like to make? Family heirloom type of stuff.  Perhaps a letter
> opener? or ???
>
> Any and all ideas are welcome.
>
> Looking forward to talking to you all more.
>
> Have a good night.
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1695017831.1379284.1613355612315%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHe27UpBqvnhUqG9p54o789KBB6hWhSrsm5urn8m4uQvg%40mail.gmail.com.


Re: Looking for some new projects.

2021-02-14 Thread Harvey Matyas
Hi Curt

You already probably know about this guy but here goes.

Projects Archives | Turning for Profit | Woodturning | Lathe |


He has like a user group where  he periodically sends out emails that have
projects in them.

I hope this helps, keep warm.

Harvey



On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> HI everyone.
>
> I hope everyone  is well?
>
> Its COLD in my shop, So I spent most of my day staying inside. I've been
> looking for projects to play with on the Legacy and or my Lathe. On the
> internet today.
>
> I want to do some more bone turning, I have already cut out a number of
> bone disks, I am looking forward to gluing them up into something that I
> can turn, soon.
> The problem is What should I make?
> I don't like pen's!
> I have already made a number of magnify glass's and other kits type of
> projects.
>
> I have gone to a number of dollar stores and hardware and thrift stores,
> looking for cheaply made things that can be re-worked. but so far no luck
> finding anything new.
> So I thought I would ask you all.  Dose anyone know of a nice projects,
> that you like to make? Family heirloom type of stuff.  Perhaps a letter
> opener? or ???
>
> Any and all ideas are welcome.
>
> Looking forward to talking to you all more.
>
> Have a good night.
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1695017831.1379284.1613355612315%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CADbgprV5ct%3DkbAXN3%2BV9kDGAh6afLHj3%3DwFi5YHyk%2BgS8qvq9w%40mail.gmail.com.


Looking for some new projects.

2021-02-14 Thread 'Curt George' via Legacy Ornamental Mills
HI everyone.
I hope everyone  is well?
Its COLD in my shop, So I spent most of my day staying inside. I've beenlooking 
for projects to play with on the Legacy and or my Lathe. On the internet today.
I want to do some more bone turning, I have already cut out a number of bone 
disks, I am looking forward to gluing them up into something that I can turn, 
soon.The problem is What should I make?I don't like pen's! I have already made 
a number of magnify glass's and other kits type of projects. 
I have gone to a number of dollar stores and hardware and thrift stores, 
looking for cheaply made things that can be re-worked. but so far no luck 
finding anything new.So I thought I would ask you all.  Dose anyone know of a 
nice projects, that you like to make? Family heirloom type of stuff.  Perhaps a 
letter opener? or ???
Any and all ideas are welcome.
Looking forward to talking to you all more.
Have a good night.
C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1695017831.1379284.1613355612315%40mail.yahoo.com.