MI A3 to A1 plots
Dear Listers, I have a series of layouts created in A3 landscape. I would like to transfer these 'plots' to fit on an A1 page. IE, 4 A3 Layouts to sit on an A1 page. Could someone please tell me the easiest way to acheive this. I have the following programs at my disposal: Adobe Acrobat Version 4 Adobe Photoshop Version 5.0 CorelDraw Version 8.0 Microsoft Office '97. I have tried using Acrobat distiller and then importing the resultant PDF files into CorelDRAW, but I have had a problem here with resolution - the graphics look fine in Acrobat, but once they come into CorelDRAW, the resolution drops considerably and the result is fairly horrendous. I'm sure this has been dealt with at some stage in the not too distant past, but if someone could throw some light on the problem, it would be much appreciated. Thanks in advance Regards, Ben. -- NOTICE: This message contains privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that you must not disseminate, copy or take any action in reliance on it. If you have received this message in error please notify Sinclair Knight Merz Pty Ltd immediately. Any views expressed in this message are those of the individual sender, except where the sender has the authority to issue and specifically states them to be the views of Sinclair Knight Merz. begin:vcard n:Ey;Ben tel;fax:+61 03 6224 2325 tel;work:+61 03 6221 3730 x-mozilla-html:TRUE url:http://www.landinfo.com.au org:Landinfo Pty. Ltd.;Hobart adr:;;20 Ellerslie Road;Battery Point;Tasmania;7004;Australia version:2.1 email;internet:[EMAIL PROTECTED] title:GIS Consultant fn:Ben Ey end:vcard
MI Supports Dual Processing?
Friends, Can someone tell me if MI supports dual processing? I'm trying to figure out ways to speed workflow, lately have been handling some biggies and things have been rather sslloo. Regards, Laith Laith Wark EDAW (Aust) P/L Design, Planning and Environments Worldwide Level 4 Rowes Building 235 Edward Street Brisbane 4000 Australia Ph: INT +61 (0)7 3229 6422 Fx: INT +61 (0)7 3229 6422 Email: [EMAIL PROTECTED] -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
MI RE: doqq files (BIL format)
Hey all. I got it working and this info may help others. It seems that you need to add some lines to the hdr file for mapinfo. the hdr file consists of the following nrows 7586 ncols 6008 ulxmap 446398.00 ulymap 4442130.00 xdim 1.00 ydim 1.00 skipbytes 24032 You need to add the following lines to the bottom of the above or mapinfo will give you a rastor error when loading. (info is for greyscale) nbands 1 nbits 8 band_rgb 1 1 1 I used worldreg to register them. (Tony Cooley at Data Directions who sell worldreg was able to give me this info) > -Original Message- > From: Lepage, Mike L (Mike)** CTR ** > Sent: Thursday, November 11, 1999 4:04 PM > To: '[EMAIL PROTECTED]' > Subject: doqq files (BIL format) > > I just got some doqq files in .bil format with a .hdr file as well. the > .bil file is about 40mb. > > I can't get them into mapinfo registered though. tried worldreg, but > format wasn't valid. The georeg mbx didn't work either. > I remember there were mails about this before but I deleted them. :( Can > someone give me the quick answer to get it loaded in? > > files are from: > ftp://penne.deasy.psu.edu/pub/pasda/doq > (pennsylvania) > > thanks, > -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
MI doqq files (BIL format)
I just got some doqq files in .bil format with a .hdr file as well. the .bil file is about 40mb. I can't get them into mapinfo registered though. tried worldreg, but format wasn't valid. The georeg mbx didn't work either. I remember there were mails about this before but I deleted them. :( Can someone give me the quick answer to get it loaded in? files are from: ftp://penne.deasy.psu.edu/pub/pasda/doq (pennsylvania) thanks, -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
Re: MI Crystal Reports
"CAD GIS. ESBIC" wrote: > > Hi, > I am wonering if anyone else has come across this problem and if so if there > is a solution. > I have installed Mapinfo 5.5 on a Windows NT4 PC but I cannot generate a new > report using Crystal reports from within Mapinfo.I can open and use Crystal > reports external to mapinfo and if I create a report externally I can then > open that report from within Mapinfo. However once I try to generate a new > report it gives a an error message on Mapinfow.exe access error Violation > and closes down Mapinfo. I have tried installing it a number of times using > both custom and typical installations with the same result. > In an attempt to find out if it was something to do specifically with NT, I > then installed it on a Windows 95 PC but the same problems reoccurs. The > details of the error message here is as follows: > - Mapinfo caused an invalid page fault in modulle mscrt.dll > - Mapinfo caused an invalid page fault in modulle kernel32.dll. > If anyone can help it will be appretiated, > Regards > Barry Doyle > Sometimes I get a Dr Watson with Crystal Reports - and THAT may be an NT thing. Seems a little flaky at times but on the whole, I have my reports going OK. I am running v5.0 (or 5.01) and by the looks of all of the reports stemming from those who have upgraded to 5.5, I am staying put. 5.0 seems eminently more stable. Tony Elson GIS Analyst Geographic Technologies Limited PO Box 6015 Wellesley Street, Auckland, New Zealand Ph: 64 9 379 2061 x107 Fax: 64 9 379 2044 Mobile: 025 278 4896 Email: [EMAIL PROTECTED] [EMAIL PROTECTED] --- -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
MI MapBasic Programmers - FYI 5.x Bug
Regarding your posting below, here is a workaround. Include "Menu.def" Declare Sub Main Sub Main Run Command "Run Menu Command " + Str$(M_FILE_SAVE_WORKSPACE) End Sub Cindy MapInfo Technical Support Dear MB developers, If you have any MapBasic applications which use the line 'Run Menu Command M_FILE_SAVE_WORKSPACE', they may fail to work properly under some circumstances (see below) with MapInfo 5.x. Richard Burkmar. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: 09 November 1999 18:03 To: [EMAIL PROTECTED] Subject: Re: MapBasic 5.x Bug This is a bug in MapInfo 5.5 as well. I will file it as a bug. Unfortunately, I don't have a workaround for this. Cindy MapInfo Technical Support * To: TechSupport/MapInfo Corp@MapInfo Corp cc: Subject: MapBasic 5.x Bug > Tech-support, > > When I compile and run the following MapBasic 5.0 program, I get an error > if I have previously run an SQL query and I have the 'save queries in > workspaces' option set (i.e. if the workspace tries to save the query). > Running 'save workspace' directly from the MapInfo menu is OK as is > running the MBX if I have not first run an SQL query or running the MBX > with the 'save queries in workspaces' option not set. > > Include "Menu.def" > Declare Sub Main > > Sub Main >Run Menu Command M_FILE_SAVE_WORKSPACE > End Sub > > This is causing us problems because we have a MapBasic App (originally > written at version 4.x) which intercepts a user's request to save a > workspace from the MapInfo file menu and runs some code to clear up > application-specific tables before saving the workspace with a line like > that shown above. Now a customer has moved to version 5.x of MapInfo, and > cannot save workspaces with queries (which they need to do) unless they > first shut down the application. > > Do you have any workarounds or bug fixes for this problem? > > Richard Burkmar -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED] -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
MI Accessing Workspaces served by an NT Version 5.5
Hello, I'm having a problem. When I access my Workspaces that I have saved on my NT Server 4.0 with MI 5.5 running in server mode, they are not showing up on the client machines attached to the network without recreating each one. I have 1 client attached which runs MI 4.5 on a Win 98. I have saved my workspaces on the NT server using 5.5. When I access them from the client I have to recreate each workspace and save it from the client machine to be able to access it as a whole workspace. When I go back to the server to look at them I have to repeate the same process and rebuild each work space which eliminates the ability for me to go and see them on the client machine. Is there away to avoid this irritating process? I have 1000's of workspaces created on the server that I would have to do this to each time I moved from the server to the client to access them. I also want to access this MI data from other clients attached to the network as we add user machines to it. Michael Scott McGinn Nexus Ag Chemicals Inc.
MI Re: virtual city software
Robert, Re: Virtual City SW A couple of years ago I tested a MI plug in called PAVAN. It plugs in to MI like other external apps (say, Named Views) but it's much cooler. I used it with local building footprint data and DEMs to recreate a 3D image of a neighborhood I was working with. I never got to the draping of photos over the building fronts and that sort of thing, but you could walk through the image, look down from any height or angle, etc. It worked by loading into MI and had it's own pull down menus that allow you to set up the image you want. Then you compile the image and look at it with a browser plug in called CosmoPlayer. The "real" application is to get these images on web sites (thus the browser connection), but it's easy to use "locally," too. The compiled image material is very compact in size, allowing easy downloads for those web applications. The person who worked on this is Steve Smith (Steve, you there?). He's located in Wales and he was a pretty regular participant in this list for quite a while. They had a web site, but I can't remember the URL this minute. You'll be able to find it though, there aren't too many PAVANs out there, I'm sure. If you're interested drop me a line and I'll find out more about it by looking through my files. -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
Re: MI How to draw a hexagon in MapInfo?
Dear Bill Your suggestion has got earn the best bet of lateral thinking I've seen for a while. Nice one! Regards Bob In message <[EMAIL PROTECTED]>, Bill Thoen <[EMAIL PROTECTED]> writes >How about drawing a six-sided buffer around the midpoint of your >line with a radius equal to one-half its length? This works well >if you aren't fussy about the orientation of the hexagon: > >dim x,y as float >dim r as float >dim objHexagon as object > >'calculate midpoint: >x = (x1 + cell.lon) / 2 >y = (y1 + cell.lat) / 2 > >'determine radius: >r = distance (x1, y1, Cell.lon, cell.lat, "km") / 2 > >'Create the hexagon: >objHexagon = Buffer (CreatePoint(x,y), 6, r, "km") > >If you want to draw a tesselation of heaxagons, and don't mind >spending $25 (but the downloadable samples are free), take a look >at: http://www.ctmap.com/gisnet/catalog/sw/hexgrid.html > >- Bill Thoen > >Xu Xiaoning wrote: >> >> Hello,All: >> >> How to draw a hexagon in MapInfo? >> >> There are some words in VB and MapInfo ,such as, >> >> mapinfo.do "Set Style Pen MakePen(1,60," & j & ")"; >> mapinfo.do "update cell set Obj= CreateLine(x1,y1,cell.lon, cell.Lat) where >rowid=" & i; >> >> Their function is to draw a line between two points.But what i really want to >know is how to >> draw a hexagon between two points.Who can teach me? >> >> Thanks, >> >>Your sincerely, >> >> Xu Xiaoning >> [EMAIL PROTECTED] >> [EMAIL PROTECTED] >> ICQ:46904055 >> >> -- >> To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put >> "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED] >-- >To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put >"unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED] -- Bob Young - www.bydesignwales.demon.co.uk -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
Re: MI How to draw a hexagon in MapInfo?
How about drawing a six-sided buffer around the midpoint of your line with a radius equal to one-half its length? This works well if you aren't fussy about the orientation of the hexagon: dim x,y as float dim r as float dim objHexagon as object 'calculate midpoint: x = (x1 + cell.lon) / 2 y = (y1 + cell.lat) / 2 'determine radius: r = distance (x1, y1, Cell.lon, cell.lat, "km") / 2 'Create the hexagon: objHexagon = Buffer (CreatePoint(x,y), 6, r, "km") If you want to draw a tesselation of heaxagons, and don't mind spending $25 (but the downloadable samples are free), take a look at: http://www.ctmap.com/gisnet/catalog/sw/hexgrid.html - Bill Thoen Xu Xiaoning wrote: > > Hello,All: > > How to draw a hexagon in MapInfo? > > There are some words in VB and MapInfo ,such as, > > mapinfo.do "Set Style Pen MakePen(1,60," & j & ")"; > mapinfo.do "update cell set Obj= CreateLine(x1,y1,cell.lon, cell.Lat) where rowid=" >& i; > > Their function is to draw a line between two points.But what i really want to know >is how to > draw a hexagon between two points.Who can teach me? > > Thanks, > >Your sincerely, > > Xu Xiaoning > [EMAIL PROTECTED] > [EMAIL PROTECTED] > ICQ:46904055 > > -- > To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put > "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED] -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
MI Re: virtual city software
Robert, Virtual Frontier would be the ideal tool for urban planning visualization. As a real-time interactive 3D visualization tool, Virtual Frontier allows the user to freely navigate a landscape or examine data from any perspective. Coupled with the software's ability to render heighted DXF files, support for draping digital imagery, placement of scalable 3D objects and sky textures, highly realistic scenes can be quickly generated. For more information about Virtual Frontier, please visit our website at http://www.northwoodgeo.com/ Please contact me if you have any further questions. Regards, Steve Bauke Virtual Frontier Product Manager Northwood Geoscience Ltd. 43 Auriga Drive Nepean ON K2E 7Y8 CANADA Tel: 613-224-2020 Fax: 613-224-1696 Website: www.northwoodgeo.com -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
MI Wireless Source Disk update
== NEWS RELEASE == CTIA WIRELESS SOURCEDISKS 3.2 NOW SHIPPING!! NICEVILLE, FLA. (November 10, 1999) GeoComm International Corporation (GeoComm) and the Cellular Telecommunications Industry Association (CTIA) are pleased to announce the release of CITA Wireless SourceDisks version 3.2. CTIA Wireless SourceDisks provide the most comprehensive suite of mapping analysis tools and data available for the Wireless Markets. Used by over 200 companies including major carriers, manufacturers, and financial firms. The SourceDisks Feature the Most Comprehensive Database and Mapping Tools Available for Automated Analysis of the Wireless Markets, Tower Sites and Coverage Areas. This easy-to-use software provides interactive access to demographic and FCC licensing data for wireless markets, over 76,000 tower site locations, and Cellular Geographic Service Areas (CGSAs) for each provider in the US and US territories. The Wireless SourceDisks were developed exclusively for CTIA by GeoComm using ArcView GIS 3.2 (included with purchase) from ESRI, Inc. You can analyze and display market areas (MSAs/RSAs, MTAs, BTAs, ESMRs) in tabular format or maps colored by the parameters you select. Worldwide markets are also included. CTIA Wireless SourceDisks 3.2 Includes: - Cellular antenna sites, with Cellular Geographic Service Areas (CGSAs) included for each provider in every cellular market for the US and US territories; - Over 76,000 tower site locations for the US and US territories; - Market ownership data with Majority and Minority percentage of ownership for cellular and PCS markets; - Wireless company database with over 5,600 records; and - Enhanced information on technologies of choice, including GSM, TDMA, CDMA by markets. Complete details concerning Release 3.2 of the Wireless SourceDisks can be found at http://software.geocomm.com/products/wsd.html To order, please call (850) 897-6778, fax (850) 897-1001 or E-mail: [EMAIL PROTECTED] About GeoComm International Corporation: GeoComm International Corporation (GeoComm) owns and operates the GeoCommunity (www.geocomm.com), the leading on-line business-to-business vertical trade community for the Geographic Information Systems (GIS) industry. In addition, GeoComm is a leader in the development of customized, mapping applications using both Internet and desktop-based GIS solutions. GIS technology is widely used by commercial businesses, state and local governments, and federal agencies for mapping and managing geographically referenced data and information. About the Cellular Telecommunications Industry Association: Cellular Telecommunications Industry Association (CTIA) is the international association for the wireless telecommunications industry, representing all elements of wireless communications. Contact: Mr. Tom Knighten, President [EMAIL PROTECTED] GeoComm International Corp. (850)897-6778 -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
Vedr: MI sql selecting text (partial)
Hi Mike Try using this the Instr() or Like() functions in your SQL Select * from MyTab Where Instr(1, MyColm, "main") > 0 Or this Select * from MyTab where Like(MyColm, %main%, "") NB the Instr() and the Like() Functions are case-sensitive, in this exampel it will only locate main but not Main or MAIN . If you will find both main and MAIN try using the LCase$() function, like this Select * from MyTab where Like(LCase$(MyColm), %main%, "") Peter Laulund National Survey and Cadastre, Denamrk "Lepage, Mike L (Mike)** CTR **" <[EMAIL PROTECTED]> - 11-11-99 15:55:48 Til:"'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]> cc: (bcc: Peter Laulund/MI/KMS) Vedrørende:MI sql selecting text (partial) All, I have no problem with selecting text from a column with the sql, but I find that it has to be an exact match to return something. Is there another select command or function where it would match to a part of the text? for example 1 main ave. if I search for "main" it would return all the rows with "main" in it so I don't have to worry about the ave or avenue type stuff. thanks, -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
MI MapBasic Programmers - FYI 5.x Bug
Dear MB developers, If you have any MapBasic applications which use the line 'Run Menu Command M_FILE_SAVE_WORKSPACE', they may fail to work properly under some circumstances (see below) with MapInfo 5.x. Richard Burkmar. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: 09 November 1999 18:03 To: [EMAIL PROTECTED] Subject: Re: MapBasic 5.x Bug This is a bug in MapInfo 5.5 as well. I will file it as a bug. Unfortunately, I don't have a workaround for this. Cindy MapInfo Technical Support * To: TechSupport/MapInfo Corp@MapInfo Corp cc: Subject: MapBasic 5.x Bug > Tech-support, > > When I compile and run the following MapBasic 5.0 program, I get an error > if I have previously run an SQL query and I have the 'save queries in > workspaces' option set (i.e. if the workspace tries to save the query). > Running 'save workspace' directly from the MapInfo menu is OK as is > running the MBX if I have not first run an SQL query or running the MBX > with the 'save queries in workspaces' option not set. > > Include "Menu.def" > Declare Sub Main > > Sub Main >Run Menu Command M_FILE_SAVE_WORKSPACE > End Sub > > This is causing us problems because we have a MapBasic App (originally > written at version 4.x) which intercepts a user's request to save a > workspace from the MapInfo file menu and runs some code to clear up > application-specific tables before saving the workspace with a line like > that shown above. Now a customer has moved to version 5.x of MapInfo, and > cannot save workspaces with queries (which they need to do) unless they > first shut down the application. > > Do you have any workarounds or bug fixes for this problem? > > Richard Burkmar -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
MI Saudia Arabia map data
Guys and gals, I am looking to obtain digital map data for Saudia Arabia - at a nominal scale of at least 1:50,000. I would also be interested to hear if any of you have any data of a greater scale for the Riyadh area. I would ideally prefer this data in MapInfo .TAB format but would accept data in any of the other major formats (e.g. ESRI .SHP). I would prefer vector data but would accept raster if that was available Please let me know if you have any data for this area and at what scale. Please also let me know prices and modes of delivery. We need this data fairly quickly so this data needs to be available now. Gareth Hardman Saturn Technologies
MI MapX newbie with Visual C++ problem
Dear all, I have a question regarding the use of MapX within Visual C++. This is my first day of MapX programming so any assistance would be greatly appreciated. I have a problem passing non-variant types to Set Methods. For example: The DisplayCoordSys.Set method requires parameter 2, the Datum, to be of VARIANT type. The problem is that Datums are represented by the CMapXDatum class, but these can't be cast to COleVariant (part of MFC). How can I set the datum property in DisplayCoordSys? Many Thanks Mark Jones Saturn Technologies Ltd. Ringwood Hants UK
Re: MI sql selecting text (partial)
Dear Mike Yes Mapinfo offers two wildcards just like DOS. The equivalent to DOS ? is _(underscore). ie represents 1 ( any 1 ) character. The equivalent to * is %(per cent). This can represent from 0 to any number of chars. So if you search for %Main% you will get all of your Mains. When MI does such a fuzzy search it cannot take advantage of indexes so depending on your table size you might find this slower tan standard searches. Good Luck Bob Bob Young By Design In message <[EMAIL PROTECTED] ent.com>, Lepage, Mike L (Mike)** CTR ** <[EMAIL PROTECTED]> writes >All, > >I have no problem with selecting text from a column with the sql, but I find >that it has to be an exact match to return something. > >Is there another select command or function where it would match to a part >of the text? > >for example 1 main ave. >if I search for "main" it would return all the rows with "main" in it so I >don't have to worry about the ave or avenue type stuff. > >thanks, > > >-- >To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put >"unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED] -- Bob Young - www.bydesignwales.demon.co.uk -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
Re: MI Comparison between GIS products
Check out http://www.spatialnews.com/reviews/ Regards Glenn DataMap wrote: > Can you help me to find articles or list for comparison GIS products > MapInfo vs ArcView, AutoCAD Map, etc. > Christo Assenov > DataMap Europe > Sofia, Bulgaria > > -- > To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put > "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED] -- Glenn Letham, Senior Editor http://www.GeoComm.com The Geocommunity http://www.SpatialNews.com "Daily GIS Industry News" http://search.geocomm.com Search the Web Using our "GIS specific" Web Search Engine [EMAIL PROTECTED] (850)897-0110 -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
MI sql selecting text (partial)
All, I have no problem with selecting text from a column with the sql, but I find that it has to be an exact match to return something. Is there another select command or function where it would match to a part of the text? for example 1 main ave. if I search for "main" it would return all the rows with "main" in it so I don't have to worry about the ave or avenue type stuff. thanks, -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
Re: MI MapImagery
G'day Maxine, I have worked with this product since the early beta's and can give it a big thumbs up. It enables a clean system with only one format/set of image data required. Go easy on the 'supersampling' setting as high values can result in slow/no plotting. This feature was originally introduced as a clever fix to MapInfo's past behaviour of dithering images to 256 colour when plotting. I recently used MapImagery & ER Mapper compression to reduce 1200Mb of orthophotos to 80Mb, with outstanding results & performance. Regards Neil Moseley Geodata Computing Services Maxine J Maguire wrote: > I have just downloaded the ERMapper plugin for MapInfo (MapImagery) and am > wondering if anyone else has used it? > I would appriciate your comments and suggestions > Cheers > Max > > Maxine Maguire > GIS Officer > Main Roads > Northern District > 146 Wills Street > Townsville > QLD 4810 > > Phone: (07) 47 207 387 > Fax: (07) 47 207 211 > > -- > To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put > "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED] -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
Re: MI - selecting text objects
Tom, You wrote: How do I go about selecting all of the text objects within a layer so that they can be deleted? Answer: In SQL Select dialog box, use the Where Condition: Str$(obj) = "text" Hope this helps, Josée _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ || // Josee Bouchard || // [EMAIL PROTECTED] || // #ICQ 8348615 || \\ || \\Le Groupe KOREM inc. || \\ http://www.korem.com 680, Charest Est, Quebec (QC) CANADA, G1K 3J4 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
Re: MI - selecting text objects
Dear Tom In MapInfo run a query where:- ObjectInfo(obj,1) = 10 put output into say WSAtext then delete al in WSAtext which will also delete the records in the main table. If you use the above code in MapBasic then include "MapBasic.def" then you can select with ObjectInfo(obj,OBJ_INFO_TYPE) = OBJ_TYPE_TEXT The MapBasic.def defines the values as 1 and 10. In MapInfo you have to use the numbers. Regards Bob By Design www.bydesignwales.demon.co.uk In message <41D50B3F2F05D21183BC00C0DFE5E13E35FAAF@water-nt- pdc.wsatkins.co.uk>, Tom Manson <[EMAIL PROTECTED]> writes >Dear list, > >How do I go about selecting all of the text objects within a layer so that >they can be deleted? > > >TIA, > > >Tom -- Bob Young - www.bydesignwales.demon.co.uk -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
RE: MI - selecting text objects
Tom, Assuming your MApInfo table is called YOUR_TABLE , Just use the SQL Select function (Query > SQL Select): Select * >From YOUR_TABLE Where Str$(obj)="text" And that's all there is to it. You can do the same for line, polyline, region, point, etc Hope this helps, Chris Perry Manager, Systems Development Parks Victoria Melbourne, Australia -Original Message- From: Tom Manson [mailto:[EMAIL PROTECTED]] Sent: Thursday, 11 November 1999 22:51 To: 'MapInfo' Subject: MI - selecting text objects Dear list, How do I go about selecting all of the text objects within a layer so that they can be deleted? TIA, Tom -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
Ref: MI Bournemouth's Foray into Internet Mapping
Sorry but URL check The direct link URL in some people's e-mail's has truncated, the full URL is http://www.bournemouth.gov.uk/SCRIPTS/hsrun.exe/webapps/MapXtreme/MapXtreme. htx;start=HS_JavaMapPage If the HS_JAVAMAPPAGE bit isn't present it returns a HahtSite Server error. Cheers Tim Chinchen (GIS Systems Developer) I.T. Services Bournemouth Borough Council Mailto:[EMAIL PROTECTED] ** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept by MIMEsweeper for the presence of computer viruses. www.bournemouth.gov.uk ** -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
RE: MI - selecting text objects
Title: RE: MI - selecting text objects Dear all, Thanks for the answers to date. Both Chris Perry and Brian Forrester werre on the right track, although Bob Young offered another solution. Anyway, here's the one that worked for me: Assuming your MpInfo table is called YOUR_TABLE , Just use the SQL Select function (Query > SQL Select): Select * From YOUR_TABLE Where Str$(obj)="text" And that's all there is to it. You can do the same for line, polyline, region, point, etc Thanks again for everyone's help. Tom
Re: MI MapImagery
MapImagery has become more stable with the latest release (6.040 October 13 1999). We find it a great product for viewing ECWs in MapInfo (also supported with a raster handler and now to ship with MapInfo) and for opening ERMapper algorithms in MapInfo. Turn off progress bar under Options>General tab - unecessary to draw attention to load time as ECWs load very quickly. > > > I have just downloaded the ERMapper plugin for MapInfo (MapImagery) and am > wondering if anyone else has used it? > I would appriciate your comments and suggestions > Cheers > Max > > Maxine Maguire > GIS Officer > Main Roads > Northern District > 146 Wills Street > Townsville > QLD 4810 > > Phone: (07) 47 207 387 > Fax: (07) 47 207 211 > > > -- > To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put > "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED] > Justin Hyland, Ph.D. ComputaMaps, PO Box 13190, Mowbray, 7705 Cape Town, South Africa tel: 27-021-423 1609, fax: 27-021-423 1603, cell: 083-763-8029 e-mail: [EMAIL PROTECTED] URL: http://www.computamaps.com -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
MI - selecting text objects
Title: MI - selecting text objects Dear list, How do I go about selecting all of the text objects within a layer so that they can be deleted? TIA, Tom
MI Bournemouth's Foray into Internet Mapping
If anyone's interested we've (Bournemouth Borough Council (UK) ) just released our first Internet based mapping using MapXtreme. I was wondering if anyone else in local govt. uses MapXtreme on the internet, I've seen a few intranet demos (notably Adrian Gray's very impressive Torbay Application). Does anyone have any comments on general MapXtreme features such as the Java Mapplet, the speed of delivery, ease of use, etc Bournemouth Site - http://www.bournemouth.gov.uk Direct Link - http://www.bournemouth.gov.uk/SCRIPTS/hsrun.exe/webapps/MapXtreme/MapXtreme. htx;start=HS_JavaMapPage (Best viewed with MS IE5) Any comments please feel free to mail me Tim Chinchen (GIS Systems Developer) 44 1202 454723 I.T. Services Bournemouth Borough Council Mailto:[EMAIL PROTECTED] P.S. Ref:- Map Imagery, we currently use ERMapper's ECW as a standard for our aerial imagery (one photo of 250mb (uncompressed TIFF) was compressed to approx. 8mb with no major loss of definition - to view in MI we've load the ECW file Handler (downloadable from www.ermapper.com)) ** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept by MIMEsweeper for the presence of computer viruses. www.bournemouth.gov.uk ** -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
MI: virtual city software
I have been asked by a client about software that you can create a virtual city to look at proposed changes. I have seen a few references about creating landscapes, and some such as virtual frontier to put 3D buildings into the landscape as blocks. He has seen an Autocad add on that allows embedding buildings that look real? Any pointers? Robert Crossley Trinity Software 10 Trinity Street Parramatta Park CAIRNS 4870 AUSTRALIA Phone: 61-7-40314877 Fax: 61-7-40314810 email: [EMAIL PROTECTED] web: www.trinitysoftware.com.au -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
MI Comparison between GIS products
Can you help me to find articles or list for comparison GIS products MapInfo vs ArcView, AutoCAD Map, etc. Christo Assenov DataMap Europe Sofia, Bulgaria -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
MI How to draw a hexagon in MapInfo?
Hello,All: How to draw a hexagon in MapInfo? There are some words in VB and MapInfo ,such as, mapinfo.do "Set Style Pen MakePen(1,60," & j & ")"; mapinfo.do "update cell set Obj= CreateLine(x1,y1,cell.lon, cell.Lat) where rowid=" & i; Their function is to draw a line between two points.But what i really want to know is how to draw a hexagon between two points.Who can teach me? Thanks, Your sincerely, Xu Xiaoning [EMAIL PROTECTED] [EMAIL PROTECTED] ICQ:46904055 -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
RE: MI MapImagery
Hi Maxine, We use MapImagery and the ERViewer 1.2 at Torbay Council, what is it you'd like to know? Adrian Gray Analyst Programmer GIS Torbay Council Castle Circus Torquay Devon TQ1 3RD England -Original Message- From: Maxine J Maguire [mailto:[EMAIL PROTECTED]] Sent: 11 November 1999 01:15 To: [EMAIL PROTECTED] Subject: MI MapImagery I have just downloaded the ERMapper plugin for MapInfo (MapImagery) and am wondering if anyone else has used it? I would appriciate your comments and suggestions Cheers Max Maxine Maguire GIS Officer Main Roads Northern District 146 Wills Street Townsville QLD 4810 Phone: (07) 47 207 387 Fax: (07) 47 207 211 -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED] -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
MI Crystal Reports
Hi, I am wonering if anyone else has come across this problem and if so if there is a solution. I have installed Mapinfo 5.5 on a Windows NT4 PC but I cannot generate a new report using Crystal reports from within Mapinfo.I can open and use Crystal reports external to mapinfo and if I create a report externally I can then open that report from within Mapinfo. However once I try to generate a new report it gives a an error message on Mapinfow.exe access error Violation and closes down Mapinfo. I have tried installing it a number of times using both custom and typical installations with the same result. In an attempt to find out if it was something to do specifically with NT, I then installed it on a Windows 95 PC but the same problems reoccurs. The details of the error message here is as follows: - Mapinfo caused an invalid page fault in modulle mscrt.dll - Mapinfo caused an invalid page fault in modulle kernel32.dll. If anyone can help it will be appretiated, Regards Barry Doyle -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
Re: MI SQL Query Builder
Don't you think that it is cumborsome finding a file in DirectionMag, it was so easy in the past, Goto www.geocities.com/SiliconValley/Grid/4434/gis.htm and download SelnUpt.zip by this program you can select records by values... or Goto Directions Magazine http://www.directionsmag.com/tools/ select "utilities" then "Order by filename" Then select 23 and download from there -Original Message- From: Philip A Chinnici <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Cc: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Date: 11 Kasım 1999 Perşembe 00:13 Subject: MI SQL Query Builder >When building a SQL query, I would like to have a drop down list of >values from my data table. As far as I can tell, I have to manually type >in field values. This is cumbersome and in ArcView this module is built >into the query builder function. Am I overlooking something? Is there a >plug in for this? > > >__ >Do You Yahoo!? >Bid and sell for free at http://auctions.yahoo.com >-- >To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put >"unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED] -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]