Re: [newbie] enigmail
mike wrote: I have a problem with decrypting my sent messages. Been expermenting with gnupg. When I send a signed and encrypted message to someone who has my key they get it and can read it fine and I have their key and can decrypt an encrypted message from them. But when I go to my *Sent* box click on a encripted message that I sent, I cannot decrypt it? Heres the error. gpg: decryption failed: secret key not available Does this mean I don't have access to my own secret key? Mdk 10.0 Mozilla 1.7 Enigmail 0.84.2.0 GnuPG v1.2.4 New to this, any ideas? Mike Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Hey Mike, you guessed correctly. This is the way the program works. Supposedly you should still have access to the original message before it was encrypted. Charles Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Configuring default firewall
Dear All I am using the default firewall of Mandrake 10.1 and I would like to configure it in the following way: * It must allow an outbound (originating at the host and connecting to the server) a TCP/IP connection with destination port 1723. * It must also allow protocol 47 (known as GRE) both inbound and outbound, with the server. There are no port numbers involved; it must be protocol 47. Any ideas? Thanks in advance, Paul PS: Since I am a GMail user, please be sure that you reply to the list. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Where is libdvdcss?
John Layt wrote: On Sat, 15 Jan 2005 07:38, Rhein Christophe wrote: Hello, I have still the same problem watching DVDs other then type 2 PAL on my Acer Aspire 1680 with DVD combo burner. I have now Kaffeine, Xine, MPlayer, Totem installed and none is working. I installed libdvdcss2 on the notebook but nothing happenes. Where should I install this package because when I urpmi it I can't find it after. Is there a setting to do in the xine software? I need to use some movies for my job and I don't want to have to install windob. Thank you Christophe I'm assuming you have libdvdcss installed from PLF, or did you compile it yourself? If you compiled it yourself, where did it get installed? It may not be on your lib path. If so, I recommend installing from the PLF instead, at http://plf.zarb.org/, you can configure a urpmi source for it at http://easyurpmi.zarb.org/. If you used PLF, do you also have all the PLF versions of Xine MPlayer installed? Here's what I have installed (not all are needed for DVD's, but it means you get most Win formats supported as well): libdvdcontrol - from plf libdvdcss2 - from plf libdvdnav4 - from mdk libdvdplay - from mdk libdvdread - from mdk libcss - from plf libxine1 - from plf mplayer - from plf mplayer-gui - from plf real-codecs - from plf xine-arts - from plf xine-faad - from plf xine-flac - from plf xine-plugins - from plf xine-ui - from mdk xine-vcdx - from mdk xine-win32 - from plf win32-codecs - from plf xanim-codecs - from plf I think that about covers it :-) John. Ok I installed all the packages and still I get the error message. How can I know where the libdvdcss2 is installed on my machine? Where should it be locateted? Thank you Christophe Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Where is libdvdcss?
On Sun, 16 Jan 2005 22:59, Rhein Christophe wrote: Ok I installed all the packages and still I get the error message. How can I know where the libdvdcss2 is installed on my machine? Where should it be locateted? Thank you Christophe Very strange. Should be in /usr/lib. John. - Forget that new hard drive, save some lives instead, donate to the Red Cross: USA: https://www.redcross.org/donate/donation-form.asp UK: https://www.donate.bt.com/bt_form_dec.htm Oz: https://www.redcross.org.au/Donations/onlineTsunamiDonations.asp NZ: https://www.banqonit.com/proxypage.aspx?boiid=205 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] partition
Hi other than my unasnwered kword problem ... what is the ebst way to resize a partition and make another one? I have parted and started it up and got this message: (snip: GPL junk) Using /dev/ide/host0/bus0/target0/lun0/disc Error: The partition table on /dev/ide/host0/bus0/target0/lun0/disc is inconsistent. There are many reasons why this might be the case. However, the most likely reason is that Linux detected the BIOS geometry for /dev/ide/host0/bus0/target0/lun0/disc incorrectly. GNU Parted suspects the real geometry should be 4870/255/63 (not 77622/16/63). You should check with your BIOS first, as this may not be correct. You can inform Linux by adding the parameter ide/host0/bus0/target0/lun0/disc=4870,255,63 to the command line. See the LILO or GRUB documentation for more information. If you think Parted's suggested geometry is correct, you may select Ignore to continue (and fix Linux later). Otherwise, select Cancel (and fix Linux and/or the BIOS now). Ignore/Cancel? is using parted the best way or is there a simple safe alternative? Martin the riddle which man must solve, he can only solve in being, in being what he is and not something else http://auskadi.tk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] partition
On Sun, 16 Jan 2005 14:14:09 +0100 Martin Hardie [EMAIL PROTECTED] wrote: other than my unasnwered kword problem ... what is the ebst way to resize a partition and make another one? Martin, You can use MCC to setup your partitions. Open up Mandrake Control Center, Mount Points, Partitions - and adjust to your needs. I've even used it to setup fat32 partitions so as to install that other less-than-desirable O.S. (after installing MD first) - but that isn't for the faint at heart - especially in that order. I do not recall seeing your kword post, but if it was like this one, and you hijacked somebodies else's post, well your question made it to probably 50 percent or even less of the list members. Alot of the regulars here setup filters in such a way that if the subject line doesn't match the original post, the message gets dumped and never read. Can anybody clarify this statement a tad better than me? Reference this web link Martin, http://mandrake.vmlinuz.ca/bin/view/Main/MandrakeMailingListEtiquette so hopefully any of your future questions will be seen by all - and you will have a much better chance of getting your questions answered if seen by a greater number of people. Just trying to help - without sounding like a list cop I hope! Good luck -- Linux user #280097 http://counter.li.org http://www.mozilla.org/products/firefox/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Where is libdvdcss?
On Sunday 16 January 2005 06:41 am, John Layt wrote: On Sun, 16 Jan 2005 22:59, Rhein Christophe wrote: Ok I installed all the packages and still I get the error message. How can I know where the libdvdcss2 is installed on my machine? Where should it be locateted? Thank you Christophe do you have a plf source defined in your URPMI setups? if not, you will need to search google for easy urpmi and then carefully read and follow the instructions on the first link the search offers.. once you have a plf source defined, just (as root, in a text console, with out the quotes,) type urpmi libdvdcss2 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] partition
Steve I tried it with MCC but I only have the one partition set up (eg swap home and /) so I think I need to resize it with the boot disk to start with -NO? my kword request was I downloaded it and installed it but it wont open Hi I urpmied koffice in my quest for a pdf translation method. it installed ok so it seems but when i try to start it via the icon i see it staring up on the task bar and nothing more happens. if I try from the shell this is the result (ie it doesnt work either.) I have tried the various koffice components and none start up. Any ideas? What do I do? $ kword koffice (lib kofficecore): WARNING: /usr/lib/libkofficeui.so.2: undefined symbol: _ZN9KIconView22contentsDragEnterEventEP15QDragEnterEvent Martin On Sunday 16 January 2005 14:49, Steve Jeppesen wrote: On Sun, 16 Jan 2005 14:14:09 +0100 Martin Hardie [EMAIL PROTECTED] wrote: other than my unasnwered kword problem ... what is the ebst way to resize a partition and make another one? Martin, You can use MCC to setup your partitions. Open up Mandrake Control Center, Mount Points, Partitions - and adjust to your needs. I've even used it to setup fat32 partitions so as to install that other less-than-desirable O.S. (after installing MD first) - but that isn't for the faint at heart - especially in that order. I do not recall seeing your kword post, but if it was like this one, and you hijacked somebodies else's post, well your question made it to probably 50 percent or even less of the list members. Alot of the regulars here setup filters in such a way that if the subject line doesn't match the original post, the message gets dumped and never read. Can anybody clarify this statement a tad better than me? Reference this web link Martin, http://mandrake.vmlinuz.ca/bin/view/Main/MandrakeMailingListEtiquette so hopefully any of your future questions will be seen by all - and you will have a much better chance of getting your questions answered if seen by a greater number of people. Just trying to help - without sounding like a list cop I hope! Good luck -- the riddle which man must solve, he can only solve in being, in being what he is and not something else http://auskadi.tk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] list cop
On Sunday 16 January 2005 14:49, Steve Jeppesen wrote: I do not recall seeing your kword post, but if it was like this one, and you hijacked somebodies else's post, well your question made it to probably 50 percent or even less of the list members. Steve I dont think i hijacked anyones post - i sent that as a new one - didnt I? -- the riddle which man must solve, he can only solve in being, in being what he is and not something else http://auskadi.tk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] list cop
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sunday 16 Jan 2005 14:01, Martin Hardie wrote: On Sunday 16 January 2005 14:49, Steve Jeppesen wrote: I do not recall seeing your kword post, but if it was like this one, and you hijacked somebodies else's post, well your question made it to probably 50 percent or even less of the list members. Steve I dont think i hijacked anyones post - i sent that as a new one - didnt I? No, Martin. You didn't. You hit reply and rubbed out the Subject line - but it still is part of the thread! If you view the full headers of your post you will see References: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] This is how mail readers organise threads. Please read the Etiquette page, as Steve requested, as it will explain it more fully. Anne - -- Registered Linux User No.293302 Have you visited http://twiki.mdklinuxfaq.org yet? Mandrake at all levels -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFB6nqXkFAvMr/nNX8RAng9AJ9MsfRqJVBLfz1I5gVbk0chn1EjxACcDJop C4shaTiWyr/2aYNfcwd0Ugw= =fMau -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] list cop
On Sunday 16 January 2005 15:30, Anne Wilson wrote: On Sunday 16 Jan 2005 14:01, Martin Hardie wrote: On Sunday 16 January 2005 14:49, Steve Jeppesen wrote: I do not recall seeing your kword post, but if it was like this one, and you hijacked somebodies else's post, well your question made it to probably 50 percent or even less of the list members. Steve I dont think i hijacked anyones post - i sent that as a new one - didnt I? No, Martin. You didn't. You hit reply and rubbed out the Subject line - but it still is part of the thread! If you view the full headers of your post you will see References: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] This is how mail readers organise threads. Please read the Etiquette page, as Steve requested, as it will explain it more fully. Anne ok i read it -- the riddle which man must solve, he can only solve in being, in being what he is and not something else http://auskadi.tk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] partition
On Sun, 16 Jan 2005 14:59:40 +0100 Martin Hardie [EMAIL PROTECTED] wrote: Steve I tried it with MCC but I only have the one partition set up (eg swap home and /) so I think I need to resize it with the boot disk to start with -NO? you are correct, I was unaware of what number and or active partitions currently in use. You would need to use a boot disk or something like MandrakeMove or Knoppix Live-CD in order to resize, then create a partition in the free space which is normally mounted and in use by your native O.S. my kword request was I downloaded it and installed it but it wont open Sorry about this one Martin, use Sylpheed-Claws myself. Little to no KDE stuff is installed on any of my systems. -- Linux user #280097 http://counter.li.org http://www.mozilla.org/products/firefox/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] kword part of thread hijacking
On Sunday 16 January 2005 09:52 am, Steve Jeppesen wrote: On Sun, 16 Jan 2005 14:59:40 +0100 Martin Hardie [EMAIL PROTECTED] wrote: Steve I tried it with MCC but I only have the one partition set up (eg swap home and /) so I think I need to resize it with the boot disk to start with -NO? you are correct, I was unaware of what number and or active partitions currently in use. You would need to use a boot disk or something like MandrakeMove or Knoppix Live-CD in order to resize, then create a partition in the free space which is normally mounted and in use by your native O.S. my kword request was I downloaded it and installed it but it wont open Sorry about this one Martin, use Sylpheed-Claws myself. Little to no KDE stuff is installed on any of my systems. Don't shoot please,,list cop... anyway what happens if you in a console, as user type (without the quotes) kword -- linux counter #167806 (http://counter.li.org/) website=http://ed-tharp.kicks-ass.org; Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] kword part of thread hijacking
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sunday 16 Jan 2005 15:16, et wrote: On Sunday 16 January 2005 09:52 am, Steve Jeppesen wrote: my kword request was I downloaded it and installed it but it wont open Sorry about this one Martin, use Sylpheed-Claws myself. Little to no KDE stuff is installed on any of my systems. Don't shoot please,,list cop... anyway what happens if you in a console, as user type (without the quotes) kword And - when you say it won't open - is there any error message, or just an apparent attempt to open, which disappears after a while? Anne - -- Registered Linux User No.293302 Have you visited http://twiki.mdklinuxfaq.org yet? Mandrake at all levels -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFB6okbkFAvMr/nNX8RAtYaAJ9GGOVFUWSACP1UCwzfZuG2FRHjBgCgoOJC SGU9IkHtl5LkkW0BMuGFyvI= =CuwD -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] problem with installation libcurl3-devel-7.12.1
i want to use curl function(PHP, PERL) and i have tried install libcurl3-devel-7.12.1. Before i installed libcurl3-7.12.1. on Mandrake 10.1. system print out error: Failed dependencies: devel(libcrypto) is needed by libcurl3-devel-7.12.1-1mdk devel(libidn) is needed by libcurl3-devel-7.12.1-1mdk devel(libssl) is needed by libcurl3-devel-7.12.1-1mdk devel(libz) is needed by libcurl3-devel-7.12.1-1mdk i can't find these libraries. ___ ALL-NEW Yahoo! Messenger - all new features - even more fun! http://uk.messenger.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] kword part of thread hijacking
On Sunday 16 January 2005 16:32, Anne Wilson wrote: On Sunday 16 Jan 2005 15:16, et wrote: On Sunday 16 January 2005 09:52 am, Steve Jeppesen wrote: my kword request was I downloaded it and installed it but it wont open Sorry about this one Martin, use Sylpheed-Claws myself. Little to no KDE stuff is installed on any of my systems. Don't shoot please,,list cop... anyway what happens if you in a console, as user type (without the quotes) kword And - when you say it won't open - is there any error message, or just an apparent attempt to open, which disappears after a while? Anne this is what happens there is an apparent attempt to open and then nothing $ kword koffice (lib kofficecore): WARNING: /usr/lib/libkofficeui.so.2: undefined symbol: _ZN9KIconView22contentsDragEnterEventEP15QDragEnterEvent -- the riddle which man must solve, he can only solve in being, in being what he is and not something else http://auskadi.tk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] kword part of thread hijacking
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sunday 16 Jan 2005 15:36, Martin Hardie wrote: what happens if you in a console, as user type (without the quotes) kword And - when you say it won't open - is there any error message, or just an apparent attempt to open, which disappears after a while? Anne this is what happens there is an apparent attempt to open and then nothing $ kword koffice (lib kofficecore): WARNING: /usr/lib/libkofficeui.so.2: undefined symbol: _ZN9KIconView22contentsDragEnterEventEP15QDragEnterEvent Sounds like missing libraries. When you say you downloaded it, where from? Did you use urpmi or Software Installer to install it, or some other method? Anne - -- Registered Linux User No.293302 Have you visited http://twiki.mdklinuxfaq.org yet? Mandrake at all levels -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFB6pCQkFAvMr/nNX8RAgTdAJ9j4W9JCfnXTgOoZF4aUwYPuV2Z4gCdEdW4 bPpp+qaBlyq9+m0OG+0F+po= =xP8z -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Network Traffic Meter
On Sat, 15 Jan 2005 23:18:54 -0500, RickSisler [EMAIL PROTECTED] wrote: Elwyn ([EMAIL PROTECTED]) wrote: Looking for a program that can show a meter on the screen about the throughput of the network card selected (ie eth0) On Windows I have the use of a program called DU Meter but I can't find anything for Mandrake (10) Cheers Elwyn Try gkrellm .. you can set it for any interface and even specific ports. from the menu .. System monitoring gkrellm HTH I'm using iptraf.Good for monitoring all network traffic on all NIC's. -- Is that a 286 or are you just running Windows? Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Where is libdvdcss?
Rhein Christophe wrote: John Layt wrote: On Sat, 15 Jan 2005 07:38, Rhein Christophe wrote: Hello, I have still the same problem watching DVDs other then type 2 PAL on my Acer Aspire 1680 with DVD combo burner. I have now Kaffeine, Xine, MPlayer, Totem installed and none is working. I installed libdvdcss2 on the notebook but nothing happenes. Where should I install this package because when I urpmi it I can't find it after. Is there a setting to do in the xine software? I need to use some movies for my job and I don't want to have to install windob. Thank you Christophe I'm assuming you have libdvdcss installed from PLF, or did you compile it yourself? If you compiled it yourself, where did it get installed? It may not be on your lib path. If so, I recommend installing from the PLF instead, at http://plf.zarb.org/, you can configure a urpmi source for it at http://easyurpmi.zarb.org/. If you used PLF, do you also have all the PLF versions of Xine MPlayer installed? Here's what I have installed (not all are needed for DVD's, but it means you get most Win formats supported as well): libdvdcontrol- from plf libdvdcss2- from plf libdvdnav4- from mdk libdvdplay- from mdk libdvdread- from mdk libcss- from plf libxine1- from plf mplayer- from plf mplayer-gui- from plf real-codecs- from plf xine-arts- from plf xine-faad- from plf xine-flac- from plf xine-plugins- from plf xine-ui- from mdk xine-vcdx- from mdk xine-win32- from plf win32-codecs- from plf xanim-codecs- from plf I think that about covers it :-) John. Ok I installed all the packages and still I get the error message. How can I know where the libdvdcss2 is installed on my machine? Where should it be locateted? Thank you Christophe Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com hope thi helps... i use the rpms provided by this site: http://cambuca.ldhs.cetuc.puc-rio.br/xine/. They work pretty good on my system which is mdk10.1. Oh if you aree going to try them, remove all other versions of xine if possible; if not possible just force the install to replace any files that conflict with those provided by the rpms. let me know how it turns out Charles Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] kword part of thread hijacking
On Sunday 16 January 2005 17:04, Anne Wilson wrote: On Sunday 16 Jan 2005 15:36, Martin Hardie wrote: what happens if you in a console, as user type (without the quotes) kword And - when you say it won't open - is there any error message, or just an apparent attempt to open, which disappears after a while? Anne this is what happens there is an apparent attempt to open and then nothing $ kword koffice (lib kofficecore): WARNING: /usr/lib/libkofficeui.so.2: undefined symbol: _ZN9KIconView22contentsDragEnterEventEP15QDragEnterEvent Sounds like missing libraries. When you say you downloaded it, where from? Did you use urpmi or Software Installer to install it, or some other method? Anne i used urpmi and got all the dependencies it wanted. But i suppose i could just uninstall and try again -- the riddle which man must solve, he can only solve in being, in being what he is and not something else http://auskadi.tk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] enigmail
Charles Lee Ying wrote: mike wrote: I have a problem with decrypting my sent messages. Been expermenting with gnupg. When I send a signed and encrypted message to someone who has my key they get it and can read it fine and I have their key and can decrypt an encrypted message from them. But when I go to my *Sent* box click on a encripted message that I sent, I cannot decrypt it? Heres the error. gpg: decryption failed: secret key not available Does this mean I don't have access to my own secret key? Mdk 10.0 Mozilla 1.7 Enigmail 0.84.2.0 GnuPG v1.2.4 New to this, any ideas? Mike Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Hey Mike, you guessed correctly. This is the way the program works. Supposedly you should still have access to the original message before it was encrypted. Charles Thanks Charles, thought I might of had something configured wrong. I'll look into having a copy before it was encrypted. Mike Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] kword part of thread hijacking
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sunday 16 Jan 2005 17:08, Martin Hardie wrote: On Sunday 16 January 2005 17:04, Anne Wilson wrote: i used urpmi and got all the dependencies it wanted. But i suppose i could just uninstall and try again No, not yet. Part of the problem with kde apps is that the kde team decided recently to split things into more manageable chunks. It seems that one consequence is that sometimes you don't get everything you need, because it seems to assume that you will have it from another part of kde - maybe I'm wrong, but that's how it seems to me. Before you give up on this install, go into SoftwareInstaller and browse all files starting with k selecting any that look as though they have any interest for you. Some have obvious names like kdecore or kdebase or some such, but others are not obviously going to give you libs, yet they may well. Sit back while they install, and see if that makes any difference. Anne - -- Registered Linux User No.293302 Have you visited http://twiki.mdklinuxfaq.org yet? Mandrake at all levels -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFB6qr0kFAvMr/nNX8RArq3AJoDPEFgoLOKaeSwv09jg80zEqEm5QCcDlVe 65fgl7mPy6CfW7Xk32/QOjI= =JiJG -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] copying data dvd's
Hi all Can K3b copy DVDs ? I have a norton ghost image on a rewriteable DVD and I need to burn it onto a write once disk to free up the rewriteable one? If K3b can't do it any ideas. -- Guy Fualks - The only man to enter the houses of Parliament with honest intentions, (he was going to blow them up). Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] copying data dvd's
On Sun, 16 Jan 2005 18:02:03 + John Bowden [EMAIL PROTECTED] wrote: Hi all Can K3b copy DVDs ? I have a norton ghost image on a rewriteable DVD and I need to burn it onto a write once disk to free up the rewriteable one? If K3b can't do it any ideas. That should not be any problem, there is a DVD Copy feature on K3b that should do this for you /Anders Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] kword part of thread hijacking
On January 16, 2005 12:08 pm, Martin Hardie wrote: On Sunday 16 January 2005 17:04, Anne Wilson wrote: On Sunday 16 Jan 2005 15:36, Martin Hardie wrote: what happens if you in a console, as user type (without the quotes) kword And - when you say it won't open - is there any error message, or just an apparent attempt to open, which disappears after a while? Anne this is what happens there is an apparent attempt to open and then nothing $ kword koffice (lib kofficecore): WARNING: /usr/lib/libkofficeui.so.2: undefined symbol: _ZN9KIconView22contentsDragEnterEventEP15QDragEnterEvent Sounds like missing libraries. When you say you downloaded it, where from? Did you use urpmi or Software Installer to install it, or some other method? Anne i used urpmi and got all the dependencies it wanted. But i suppose i could just uninstall and try again What you can do with Mandrake control center is open the software install program and do a search. In the drop down menu select in file name then type in libkofficeui.so.2 and it should tell you what package has that particular file in it. for me it was libkoffice2-progs HTH Regards, Dan Gordon -- Sun Jan 16 13:17:00 EST 2005 13:17:00 up 1 day, 17:05, 1 user, load average: 0.12, 0.12, 0.09 I bought some used paint. It was in the shape of a house. -- Steven Wright Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] kword part of thread hijacking
On Sunday 16 January 2005 06:57 pm, Anne Wilson wrote: On Sunday 16 Jan 2005 17:08, Martin Hardie wrote: On Sunday 16 January 2005 17:04, Anne Wilson wrote: i used urpmi and got all the dependencies it wanted. But i suppose i could just uninstall and try again No, not yet. Part of the problem with kde apps is that the kde team decided recently to split things into more manageable chunks. It seems that one consequence is that sometimes you don't get everything you need, because it seems to assume that you will have it from another part of kde - maybe I'm wrong, but that's how it seems to me. Before you give up on this install, go into SoftwareInstaller and browse all files starting with k selecting any that look as though they have any interest for you. Some have obvious names like kdecore or kdebase or some such, but others are not obviously going to give you libs, yet they may well. Sit back while they install, and see if that makes any difference. Anne Anne thanks i will put it on the agenda!! -- the riddle which man must solve, he can only solve in being, in being what he is and not something else http://auskadi.tk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] copying data dvd's
On Sunday 16 Jan 2005 18:33, Anders Lind wrote: On Sun, 16 Jan 2005 18:02:03 + John Bowden [EMAIL PROTECTED] wrote: Hi all Can K3b copy DVDs ? I have a norton ghost image on a rewriteable DVD and I need to burn it onto a write once disk to free up the rewriteable one? If K3b can't do it any ideas. That should not be any problem, there is a DVD Copy feature on K3b that should do this for you /Anders I found it did not look further than the end of my nose ! Ta -- Guy Fualks - The only man to enter the houses of Parliament with honest intentions, (he was going to blow them up). Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] kword part of thread hijacking
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sunday 16 Jan 2005 18:20, Dan Gordon wrote: On January 16, 2005 12:08 pm, Martin Hardie wrote: What you can do with Mandrake control center is open the software install program and do a search. In the drop down menu select in file name then type in libkofficeui.so.2 and it should tell you what package has that particular file in it. for me it was libkoffice2-progs Neat trick - I hadn't heard that before. Aimed generally, not at Dan - please snip wherever possible. Some readers are on dialup or limited bandwidth. Thanks. Anne - -- Registered Linux User No.293302 Have you visited http://twiki.mdklinuxfaq.org yet? Mandrake at all levels -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFB6rcgkFAvMr/nNX8RAjWaAJ9iwIFuGdXxRbzjLiglnnf/p3ONuwCfZMeh JC+uJ7QnRmQ7jjhPQ+o4HYc= =hr2N -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] .freesoftwaremagazine.com
Forwading this coz maybe some people like this sort of proaganda! /snip ... /unsnip Frederick Noronha (FN) [EMAIL PROTECTED] Issue 1 Volume 1 of this new magazine has just hit the (cyber)stands. And, don't be too surprised, you're free to download a copy too of this 78-page publication. Some of the articles in the first issue: o File formats; format wars (Marco Fioretti) File formats: the past, the present, a possible future o XML: The answer to everything? (Kay Ethier, Scott Abel) This article weighs the pros and cons of XML for some applciations (publishing) and explores why it is the best possible solution for many programming and publishing needs. o Free file formats and the future of intellectual freedom (Terry Hancock) Information as property may be served by closed file formats, but the freedom of information requires free formats. o Creating the Free Software Magazine (Tony Mobily) A long path that takes us to the very beginning of this project. o Mac OS X: Welcome to the jungle -- a look inside the Mac OS X software ecology (Chris J Karr) o The magic of live CDs (Harish Pillay) What are live CDs, and how do they work? o Every engineer's checklist for justifying Free Software. It's not just about 'no licence fees' (Malcolm D Spence) o Smarter password management (John Locke) How to handle your passwords without getting lost o The content tail wags the IT dog (Daniel James) Without hardware and software, there would be nothing for digital media to be created on, or used with. And yet the content industry attempts to tell the far larger IT industry what it can and cannot do. o Motivation and value of free resources. Wikipedia and Planetmath show the way (Aaron E Klemm) o It's all about freedom (Christian Einfeldt) Freedom is free software's competitive advantage. o The Commons (Dave M Berry) The Commons as an Idea -- Ideas as a Commons o Let's not forget our roots (Free Software is not just about cost or stability; it's a movement that mustn't forget the principles which made it possible) Tom Chance. A PLANT NEEDS WATER TO GROW! Free Software Magazine -- by subscribing you will be supporting a magazine which believes in Free Software. All our articles are released under the GNU free documentation license, enhancing existing information on Free Software. Download your copy today from http://www.freesoftwaremagazine.com Subscriptions open! Frederick Noronha (FN)Nr Convent Saligao 403511 GoaIndia Freelance Journalist P: 832-2409490 M: 9822122436 http://fn.swiki.net http://fn-floss.notlong.com -- the riddle which man must solve, he can only solve in being, in being what he is and not something else http://auskadi.tk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Network Traffic Meter
Thank you for all your replies. I have noticed a lot of the messages came direct rather than to the email list... I have gone for Gkrellm and it seems to the job and a few others as well :) Cheers Elwyn Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Network Traffic Meter
On Sunday 16 Jan 2005 19:44, you wrote: Elwyn wrote: Thank you for all your replies. I have noticed a lot of the messages came direct rather than to the email list... You need to remove your ReplyTo in your email or change it to newbie@linux-mandrake.com Then all the replys go to list. Ok Thanks ;) Elwyn Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] postgresql problems
I'm trying to install Cubit which requires postgresql. But I keep getting this error: psql: FATAL: IDENT authentication failed for user pguser when I type psql -U pguser I've googled on the error and made changes to pg_ident.conf and pg_hba.conf as suggested but I still get the error, even thought I restarted the service. I also followed this howto: HOWTO use the PostgreSQL server in few steps by Christian Belisle [EMAIL PROTECTED] This file is included with the Mandrake PostgreSQL's packages. After you installed the packages, here is the procedure to start quickly but nicely. 1- Become root user on your machine. (su) 2- Become postgres user. (su postgres) 3- Create a user (createuser) 4- Be sure that the postmaster is running (service postgresql status) 5- Logout from the postgres and the root account. 6- Test it. (psql -U [username]) I'm actually surprised at how difficult this is to setup. Or more accurately, I'm surprised at how hard it is to get the info. Thanks folks, Jarlath -- Copyrighting allows people to benefit from their labours, but software patents allow the companies with the largest legal departments to benefit from everyone else's work. Andrew Brown, The Guardian. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Re: enigmail
mike wrote: I have a problem with decrypting my sent messages. Been expermenting with gnupg. When I send a signed and encrypted message to someone who has my key they get it and can read it fine and I have their key and can decrypt an encrypted message from them. But when I go to my *Sent* box click on a encripted message that I sent, I cannot decrypt it? Heres the error. gpg: decryption failed: secret key not available Does this mean I don't have access to my own secret key? Mdk 10.0 Mozilla 1.7 Enigmail 0.84.2.0 GnuPG v1.2.4 New to this, any ideas? Mike Well found the answer. Working with someone off list, turns out I needed (encrypt to self) box checked under preferences. According to enigmail's documentation you have to encrypt it with both the recipients and your key if you want to read what you sent. Mike Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Re: enigmail
mike wrote: mike wrote: I have a problem with decrypting my sent messages. Been expermenting with gnupg. When I send a signed and encrypted message to someone who has my key they get it and can read it fine and I have their key and can decrypt an encrypted message from them. But when I go to my *Sent* box click on a encripted message that I sent, I cannot decrypt it? Heres the error. gpg: decryption failed: secret key not available Does this mean I don't have access to my own secret key? Mdk 10.0 Mozilla 1.7 Enigmail 0.84.2.0 GnuPG v1.2.4 New to this, any ideas? Mike Well found the answer. Working with someone off list, turns out I needed (encrypt to self) box checked under preferences. According to enigmail's documentation you have to encrypt it with both the recipients and your key if you want to read what you sent. Mike Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Thx Mike, I learned something new today. I didn't know that was possible. Charles Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] oooqs and GNOME - for information only
Under GNOME and Mandrake 9.2 I have managed to get OpenOffice to start up in 3 or 4 seconds, which is fine. But, out of curiosity I installed oooqs from the PowerPack DVD and invoked it. The first problem was that it started kbuildsycoca, which always takes time and usually spits out a dozen error messages, so it is obviously designed for KDE. The second problem was that it hung after reporting several KIO connection errors, which probably means that it is incompatible with GNOME anyway. This is the first time I have ever hit such an obstacle. I wondered if there were any other KDE applications which fail under GNOME. -- Len Lawrence -- Be nice to people on the way up, because you'll meet them on your way down. -- Wilson Mizner -- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Where is libdvdcss?
On Sun, 16 Jan 2005 22:41:41 +1100 John Layt [EMAIL PROTECTED] wrote: On Sun, 16 Jan 2005 22:59, Rhein Christophe wrote: Ok I installed all the packages and still I get the error message. How can I know where the libdvdcss2 is installed on my machine? Where should it be locateted? Thank you Christophe Very strange. Should be in /usr/lib. John. As John says. Look for /usr/lib/libdvdcss.so On my system libdvdcss.so.2.0.3 installed from libdvdcss2-1.2.4-1plf. Your version numbers may differ. -- Len Lawrence -- Be nice to people on the way up, because you'll meet them on your way down. -- Wilson Mizner -- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Konstruct
Has anyone tried this app yet? If so, were there any problems? Desktop Environment :: K Desktop Environment (KDE) System :: Installation/Setup About: Konstruct is a build system which helps you install KDE releases and applications on your system. It downloads defined source tarballs, checks their integrity, decompresses, patches, configures, builds, and installs them. A complete KDE installation should be as easy as cd meta/kde;make install. Optionally, you can install additional applications like KOffice, KDevelop, or Quanta (for example, cd apps/koffice;make install). Changes: The unstable version now installs KDE 3.4 Beta 1. All included packages were updated to their latest versions. License: Freeware URL: http://freshmeat.net/projects/konstruct/ -- Chris Registered Linux User 283774 http://counter.li.org 19:46:16 up 5 days, 2:22, 1 user, load average: 0.86, 0.57, 0.44 Mandrake Linux 10.1 Official, kernel 2.6.8.1-12mdk Problem solving under Linux has never been the circus that it is under AIX. -- Pete Ehlke in comp.unix.aix Live - From Virgin Radio UK ZZ Top - Rough boy - Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Network Traffic Meter
On Sunday 16 January 2005 01:27 pm, Elwyn wrote: Thank you for all your replies. I have noticed a lot of the messages came direct rather than to the email list... I have gone for Gkrellm and it seems to the job and a few others as well :) Cheers Elwyn You have your reply to: set to yourself not newbie. HTH -- Dennis M. linux user #180842 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Translate errors with cdrecord?
On Wednesday 12 January 2005 12:30 pm, Tom Brinkman wrote: On Wednesday 12 January 2005 08:30 am, David Reynolds wrote: Okay, I need to back up some of my data and, more importantly, burn my 10.1 ISOs before I reinstall (to fix the libgcc error my machine developed on the last install). However *because* libgcc failed, there are a whole host of programs I can't install, so I'm back to the CLI for cdburning. When I try to check my cdrom burner I get this: # cdrecord -scanbus (really, cdrecord --anything) Should be 'cdrecord dev=ATA -scanbus' on a 10.1 system. If that returns x,x,x as your burner, then burn the iso's with Actually it's a 10.0 system currently (which is why I'm trying to burn 10.1 ISOs). Still no love from cdrecord after forcing the gcc packages as you suggested; is there a way to 'test' gcc from the command line to see if it's working better? Is cdrecord the only available burn 'backend' program? Maybe there's one that won't fail out...Nautilus-cd-burner wants to install a crapload of other libraries I don't have on the HD yet, so that seems overkill when I'm not even certain that it's not using the same backend... I apologize if these are stupid questions, I'm just a little confused by this whole process (as if that wasn't bloody obvious). David Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Re: enigmail
Charles Lee Ying wrote: mike wrote: mike wrote: I have a problem with decrypting my sent messages. Been expermenting with gnupg. When I send a signed and encrypted message to someone who has my key they get it and can read it fine and I have their key and can decrypt an encrypted message from them. But when I go to my *Sent* box click on a encripted message that I sent, I cannot decrypt it? Heres the error. gpg: decryption failed: secret key not available Does this mean I don't have access to my own secret key? Mdk 10.0 Mozilla 1.7 Enigmail 0.84.2.0 GnuPG v1.2.4 New to this, any ideas? Mike Well found the answer. Working with someone off list, turns out I needed (encrypt to self) box checked under preferences. According to enigmail's documentation you have to encrypt it with both the recipients and your key if you want to read what you sent. Mike Thx Mike, I learned something new today. I didn't know that was possible. Charles Me too, Charles I suppose that I lose a level of security doing it this way. Now there are two keys able decrypt the message, as opposed to just one, the recipient. But its mostly learning experience for me. Thanks again for help, Mike Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Wireless Mouse
Just wondering if anyone has had success using a wireless mouse on M10.1? I can't seem to get the basic mouse from MS to work correct. I'm using a USB to PS2 adapter. It should function like a standard PS2 3-button mouse w/ scroll wheel. Thanks! -- Regards, Matt Florido Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Wireless Mouse
Matt Florido wrote: Just wondering if anyone has had success using a wireless mouse on M10.1? I can't seem to get the basic mouse from MS to work correct. I'm using a USB to PS2 adapter. It should function like a standard PS2 3-button mouse w/ scroll wheel. Thanks! Dumb question time... 1: By USB to PS2 adapter, do you mean one of the adapters that come with some mice to let you plug a USB/PS2 mouse in a PS2 poet, or an adapterer that gives you a PS2 port on a USB connection? 2: If you are plugging into a PS2 port, did the adpater come with the mouse, or is it from a different mouse? 3: Has the mouse ever worked with this setup? The reasion I ask is that the adapters that let you plug a USB mouse into a PS2 port only work with mice designed to be used that way. From what I understand, they just connect the PS2 power and data connections to the power and data lines on the USB connector, and don't do anything else. So if your mouse doesn't know how to talk to a PS2 port, and send information like a PS2 mouse instead of a USB mouse, it will not work. Mikkel -- Do not meddle in the affairs of dragons, for you are crunchy and taste good with Ketchup! Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] USB external hard drive
I have tried several times to get Mandrake version 10.1 to recognize my external USB ( Maxtor Diamond Max) hard drive. If I turn it on before or during bootup it seems to freeze the booting process. It is not recognized. Actually listed hardware states it is a unknown device. If I turn it on after booting it has a red pilot light. I have even removed the drive from the case and booting without the drive gives a green pilot light but the device is not recognized in the hardware list. The case does not have any jumpers to change but the hard drive does. Could the problem reside here? The box recognizes my USB mouse and printer automatically. Any suggestions/ Owen Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] How do I fix the sound in mdk 10.1 ?
very good sir, here is what the file /etc/modprobe.conf contains: # This file is autogenerated from /etc/modules.conf using generate-modprobe.conf command alias eth0 via-rhine remove snd-emu10k1 /sbin/modprobe --first-time -r --ignore-remove snd-emu10k1 install snd-emu10k1 /sbin/modprobe --first-time --ignore-install snd-emu10k1 install usb-interface /sbin/modprobe uhci-hcd; /sbin/modprobe ehci-hcd; /bin/true remove emu10k1 /sbin/modprobe --first-time -r --ignore-remove emu10k1 install emu10k1 /sbin/modprobe --first-time --ignore-install emu10k1 # --- BEGIN: Generated by ALSACONF, do not edit. --- # --- ALSACONF verion 1.0.6 --- options snd device_mode=0666 alias sound-slot-0 audigy # --- END: Generated by ALSACONF, do not edit. --- alias snd-0 snd-emu10k1 * --- Greg Meyer [EMAIL PROTECTED] wrote: On Saturday 15 January 2005 04:52 am, John Retermeyer wrote: Running mdk 10.1 sound card is a pci soundblaster sblive 5.1 already ran the hardrake tool for the sound card. post contents of /etc/modprobe.conf Anne, you have this card, don't you? -- /g Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com __ Do you Yahoo!? Read only the mail you want - Yahoo! Mail SpamGuard. http://promotions.yahoo.com/new_mail Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Wireless Mouse
* Mikkel L. Ellertson [EMAIL PROTECTED] [01-16-2005 22:27]: Matt Florido wrote: Just wondering if anyone has had success using a wireless mouse on M10.1? I can't seem to get the basic mouse from MS to work correct. I'm using a USB to PS2 adapter. It should function like a standard PS2 3-button mouse w/ scroll wheel. Thanks! Dumb question time... Sorry for my ambiguity. 1: By USB to PS2 adapter, do you mean one of the adapters that come with some mice to let you plug a USB/PS2 mouse in a PS2 poet, or an adapterer that gives you a PS2 port on a USB connection? The mouse interface is USB. Adapter is so I can plug it into a PS2 port. 2: If you are plugging into a PS2 port, did the adpater come with the mouse, or is it from a different mouse? It's an adapter that came with the Microsoft mouse. In fact, all USB mice that I've purchased from MS come with this teal colored USB--PS2 adapter. 3: Has the mouse ever worked with this setup? The reasion I ask is that the adapters that let you plug a USB mouse into a PS2 port only work with mice designed to be used that way. From what I understand, they just connect the PS2 power and data connections to the power and data lines on the USB connector, and don't do anything else. So if your mouse doesn't know how to talk to a PS2 port, and send information like a PS2 mouse instead of a USB mouse, it will not work. Come to think of it, this is the basic MS Wireless Optical Mouse. I've used the adapter on other models. I use others on a KVM that only has PS2 and it works with no issues. You make a good point. I shouldn't assume this mouse works in a similar manner. -- Regards, Matt Florido Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] How do I fix the sound in mdk 10.1 ?
On Monday 17 January 2005 12:47 am, John Retermeyer wrote: alias sound-slot-0 audigy # --- END: Generated by ALSACONF, do not edit. --- But you don't have an audigy. Shouldn't this be snd-emu10k1, like this alias sound-slot-0 snd-emu10k1 and this should not be there alias snd-0 snd-emu10k1 Also, there are tow install and remove entries. There should only be one of each. This is what I think the lines in modrobe.conf should look like based on my working system that uses snd-cmipci. You have two sets of entries and it is asking for two different things. alias sound-card-0 snd-emu10k1 alias sound-slot-0 snd-emu10k1 install snd-emu10k1 /sbin/modprobe --first-time --ignore-install snd-emu10k1 { /sbin/modprobe snd-pcm-oss; /bin/true; } remove snd-emu10k1 { /sbin/modprobe -r snd-pcm-oss; } ; /sbin/modprobe -r --first-time --ignore-remove snd-emu10k1 -- /g Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] oooqs and GNOME - for information only
Il lun, 2005-01-17 alle 01:39, Len Lawrence ha scritto: Under GNOME and Mandrake 9.2 I have managed to get OpenOffice to start up in 3 or 4 seconds, which is fine. But, out of curiosity I installed oooqs from the PowerPack DVD and invoked it. The first problem was that it started kbuildsycoca, which always takes time and usually spits out a dozen error messages, so it is obviously designed for KDE. The second problem was that it hung after reporting several KIO connection errors, which probably means that it is incompatible with GNOME anyway. This is the first time I have ever hit such an obstacle. I wondered if there were any other KDE applications which fail under GNOME. Quoted from SegFault's KDE Projects : OpenOffice.org Quickstarter http://segfaultskde.berlios.de/index.php?content=oooqs OpenOffice.org Quickstarter is a small application that runs in the KDE SystemTray. So this is a KDE stuff . http://sourceforge.net/project/showfiles.php?group_id=55323package_id=50803 here is an old Gnome/Ooo stuff called evolvendoo, there is also a gnome applet . Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Wireless Mouse
On Sunday 16 January 2005 09:49 pm, Matt Florido wrote: * Mikkel L. Ellertson [EMAIL PROTECTED] [01-16-2005 22:27]: Matt Florido wrote: Just wondering if anyone has had success using a wireless mouse on M10.1? I can't seem to get the basic mouse from MS to work correct. I'm using a USB to PS2 adapter. It should function like a standard PS2 3-button mouse w/ scroll wheel. Thanks! Dumb question time... Sorry for my ambiguity. 1: By USB to PS2 adapter, do you mean one of the adapters that come with some mice to let you plug a USB/PS2 mouse in a PS2 poet, or an adapterer that gives you a PS2 port on a USB connection? The mouse interface is USB. Adapter is so I can plug it into a PS2 port. 2: If you are plugging into a PS2 port, did the adpater come with the mouse, or is it from a different mouse? It's an adapter that came with the Microsoft mouse. In fact, all USB mice that I've purchased from MS come with this teal colored USB--PS2 adapter. 3: Has the mouse ever worked with this setup? The reasion I ask is that the adapters that let you plug a USB mouse into a PS2 port only work with mice designed to be used that way. From what I understand, they just connect the PS2 power and data connections to the power and data lines on the USB connector, and don't do anything else. So if your mouse doesn't know how to talk to a PS2 port, and send information like a PS2 mouse instead of a USB mouse, it will not work. Come to think of it, this is the basic MS Wireless Optical Mouse. I've used the adapter on other models. I use others on a KVM that only has PS2 and it works with no issues. You make a good point. I shouldn't assume this mouse works in a similar manner. I use a iOne Lynk mark 7 plugged into a KVM switch and it seems to work for me one thing you have to click it to wake it up otherwise press the button on the USB reciever and within 5 seconds press the button on the bottom of the mouse HTH Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com