[newbie] MDK On-Line
Hi All, How do you turn the MDK On-Line applet back on in KDE,on a updated 10.1 system?I turn it off and now can not get it back. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Broke Gnome.
Hi All, I have just updated 10.1(Ce) from the newly updated Tree.Now Gnome does not appear in the Log On options.This not a major problem,but any program which needs the Gnome Libs now do not run. How do I go about sorting this problem?Also if Iupdate to Gnome 2.7,will make an even bigger mess? Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] ML and slow DSL
How would I go about doing that? most of anything relating to DNS is greek to me.. On Sun, 24 Oct 2004 07:24:29 +1000, Stephen Kühn [EMAIL PROTECTED] wrote: On Sun, 2004-10-24 at 07:17, Drew Poland wrote: I tried disabling IPv6, didn't work for me. Why not just add a few root DNS servers to your /etc/resolv.conf and restart the networking; that way you're not always dependent on what DNS servers are being used by your ISP, eh? (Improved our performance here quite a bit, and I always do the same for my clients as well - especially when they're having strange issues like this) HTH -- stephen kuhn mobile: 0410-728-389 illawarra and regional new south wales --- GNU/Linux/OpenSource Solutions and Alternatives 100% Microsoft Free and no viruses Registered User # 267497 --- Pohl's law: Nothing is so good that somebody, somewhere, will not hate it. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] ML and slow DSL
ok, I just did that.. my resolv.conf keeps getting set back to this though; nameserver 192.168.0.1 search dhcppc1 On Mon, 25 Oct 2004 08:43:40 +1000, Stephen Kühn [EMAIL PROTECTED] wrote: On Mon, 2004-10-25 at 08:37, Drew Poland wrote: How would I go about doing that? most of anything relating to DNS is greek to me.. Find a good root DNS server (something outside of your area) and use that as one of your DNS servers (you can have three or four, ya know) and add that to your /etc/resolv.conf and then do a: /sbin/service network restart -- stephen kuhn mobile: 0410-728-389 illawarra and regional new south wales --- GNU/Linux/OpenSource Solutions and Alternatives 100% Microsoft Free and no viruses Registered User # 267497 --- The only solution is ... a balance of power. We arm our side with exactly that much more. A balance of power -- the trickiest, most difficult, dirtiest game of them all. But the only one that preserves both sides. -- Kirk, A Private Little War, stardate 4211.8 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] ML and slow DSL
I don't have DSL, I have cable. On Mon, 25 Oct 2004 09:29:53 +1000, Stephen Kühn [EMAIL PROTECTED] wrote: On Mon, 2004-10-25 at 09:21, Drew Poland wrote: ok, I just did that.. my resolv.conf keeps getting set back to this though; nameserver 192.168.0.1 search dhcppc1 OK - well, I don't know how you have your ADSL setup - I always do mine manually - but somewhere in your ADSL setup/connection you should be able to statically add at least one more DNS server - check into it. -- stephen kuhn mobile: 0410-728-389 illawarra and regional new south wales --- GNU/Linux/OpenSource Solutions and Alternatives 100% Microsoft Free and no viruses Registered User # 267497 --- Most people would like to be delivered from temptation but would like it to keep in touch. -- Robert Orben Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] ML and slow DSL
DHCP On Mon, 25 Oct 2004 10:03:41 +1000, Stephen Kühn [EMAIL PROTECTED] wrote: On Mon, 2004-10-25 at 09:59, Drew Poland wrote: I don't have DSL, I have cable. So since you have cable, you are setup for a static IP on the cable router, right? Or, exactly, how do you establish your connection? -- stephen kuhn mobile: 0410-728-389 illawarra and regional new south wales --- GNU/Linux/OpenSource Solutions and Alternatives 100% Microsoft Free and no viruses Registered User # 267497 --- As part of an ongoing effort to keep you, the Fortune reader, abreast of the valuable information the daily crosses the USENET, Fortune presents: News articles that answer *your* questions, #1: Newsgroups: comp.sources.d Subject: how do I run C code received from sources Keywords: C sources Distribution: na I do not know how to run the C programs that are posted in the sources newsgroup. I save the files, edit them to remove the headers, and change the mode so that they are executable, but I cannot get them to run. (I have never written a C program before.) Must they be compiled? With what compiler? How do I do this? If I compile them, is an object code file generated or must I generate it explicitly with the character? Is there something else that must be done? Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] ML and slow DSL
I tried disabling IPv6, didn't work for me. On Fri, 22 Oct 2004 17:04:53 +0100, Derek Jennings [EMAIL PROTECTED] wrote: On Friday 22 October 2004 16:09, Marc wrote: This may be on the boarder line of off topic. For about the last week about half of the web sites that I go to work normally and the other half have about a half minute delay before a page starts to load. The slow ones are always slow and the fast ones are always fast. Up until a week ago EVERYTHING was really fast. I am on a high speed DSL connection. Here is where it all gets strange. Everything is still fast when using windoze. And strainger yet it is not just me the same thing is happening to at least 10 other Mandrake users in my area. All of us are using ML 10.0, ML 10.0.2 or ML 10.1 amd all of us still have normal fast service when using windoze. I don't know if other linux distros are affected. Is anyone else here having similar problems with Century Tel? Anyone here have any idea what may be going on or the cause of this problem? A few of us have contacted the local ISP, Century Tel and they have no answers. Thanks in advance for any suggestions or solutions Marc Maybe your ISP is messing about with IPV6 Try disabling it. Put alias net-pf-10 off in your /etc/modprobe.conf file and reboot. derek -- www.jennings.homelinux.net http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] ML and slow DSL
No clue, but I am having the same problem. :( http://mandrakeusers.org/index.php?showtopic=19727 Drew On Fri, 22 Oct 2004 10:09:26 -0500, Marc [EMAIL PROTECTED] wrote: This may be on the boarder line of off topic. For about the last week about half of the web sites that I go to work normally and the other half have about a half minute delay before a page starts to load. The slow ones are always slow and the fast ones are always fast. Up until a week ago EVERYTHING was really fast. I am on a high speed DSL connection. Here is where it all gets strange. Everything is still fast when using windoze. And strainger yet it is not just me the same thing is happening to at least 10 other Mandrake users in my area. All of us are using ML 10.0, ML 10.0.2 or ML 10.1 amd all of us still have normal fast service when using windoze. I don't know if other linux distros are affected. Is anyone else here having similar problems with Century Tel? Anyone here have any idea what may be going on or the cause of this problem? A few of us have contacted the local ISP, Century Tel and they have no answers. Thanks in advance for any suggestions or solutions Marc Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] MKD 10.1
On Tuesday 28 Sep 2004 20:27, Derek Jennings wrote: MKD Thanks Derek, Sorted updates now and the URMPI stuff,it turns out that I had my soucres set for the mirrors in the UK which had not been update to the 10.1 tree. I will try the Nvidia install in a few days,now the pc is up and running with noi problems. Cheers, Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Xmms crashes
On Thursday 08 Jul 2004 6:24 pm, C. Tresenriter wrote: I have 10.0 Official installed and get sound with Realplay but xmms has problems. When I load a CD to play and click on a track it crashes. If I start a stream, it buffers and looks like it's connected - shows that it's a stereo signal, but there's no sound and the timer sits at zero. Then if I try to close it with the 'x' button, the button stays depressed and the app stays open. If I then try to go to right click and go to options or grab it at the top it closes. I'd thought it had something to do with the Arts soundwrapper - which I remember solved another problem in the past but removing it from the xmms info in the menu tool didn't help. Seems like I resolved this in an earlier version of MDK but I'm coming up blank this time. Does this behavior sound familiar to anyone? Curt Hi Curt, Have you tried to install the ALSA plugin,I have used it with 9.1.9.2 and 10,and it works fine and sounds better than OSS drivers. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Kernel 2.6 and 9.2
Hi All, I there a know problem with 9.2 and Kernel 2.6? I installed 6.2 and boot into the system with no problems,until I tried to use K3B.The program would not start,so I used XKill to stop it.When I reboot, the info on the boot screen said I had not unmount my Home partition. When I got into KDE the hard drive light stayed on,and the Teac CD-writer active light l stayed on,like I was using the drive.When I reboot again I received a string of error messages,about Home not been unmount. I booted into Gnome and did not get the H/D or Writer problem,until I tried to use the writer again.So when I shut down the PC,i had the unmount problem again,when I went back to Gnome the problems above start again. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Trashed Laptop
Hi All, I need some tech help. A friend of mine has had her Windows XP Laptop trashed by a number of viri and Trojans a so called friend sent her.They have smashed her Firewall,and killed her AV scanner.The effect is she can no longer boot up at all. Is there any way I can boot up her PC using MKD Move or Knoppix,and copy over the files on the machine,to my MDK only PC,so I can clean them and save them to disc?If the worse comes to the worse,would be possible to connect a USB printer and print them off?Does Ark do spilt Zip files over multiple floppies?Because that maybe an other answer to the problem. My PC has USB ports and a network card,I would prefer to use the USB,because I use the NIC to connect to the net using a cable modem.and I dont want to naff up MAC address for it. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Trashed Laptop
On Friday 28 May 2004 21:16, Kaj Haulrich wrote: On Friday 28 May 2004 21:36, Stephen Kuhn wrote: On Sat, 2004-05-29 at 05:26, Kaj Haulrich wrote: On Friday 28 May 2004 21:12, Stephen Kuhn wrote: snip LAN. Maybe I'm just lucky enough to have a LAN here; no dial-up necessary - just an extra cable plugged into the router/switch. /snip You lucky bastard ;-) Kaj Haulrich. There's a fair few folks here that have a LAN at home - I thought you did as well...eh? No Stephen. Our humle habitat has but two stationary PC's and one laptop. We have a T1 connection to the internet with two dynamic IP addresses so we just use a switch. KISS. But we have access to quite some server space out there. But the original poster - I think it was Drew - mentioned nothing about servers and such, so that's why I proposed the resizing option with a minimal linux install. Wonder how he's doing ? Kaj Haulrich. Hi All, I'm getting my hands on the broken beast sometime in the next 12hrs,the owner lives over 200 miles away,but luckily coming to see the wife(Di) and over the holidays,so we could go out for some beer. But now looks like Laptop time while drinking what ever I can get my hands on. Any hows this for a bright idea,Dawn has only one file she realy care about,would in be possible to plug my cable modem into the laptop and email the file or FTP it to online account,such as Lycos,which she can access from XP if and when she gets it going. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Trashed Laptop
On Friday 28 May 2004 23:56, Kaj Haulrich wrote: On Saturday 29 May 2004 00:32, Drew Martin wrote: snip Any hows this for a bright idea,Dawn has only one file she realy care about,would in be possible to plug my cable modem into the laptop and email the file or FTP it to online account,such as Lycos,which she can access from XP if and when she gets it going. Drew /snip Yes, but I understood that she couldn't get the XP laptop to boot at all ? - If she can, than what's the problem ? Kaj Haulrich. Hi All This was for when she has reformatted the laptop,or she could download it off the net at work. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] MP3 Burning
Hello All, I have just got a CD/MP3 Disc player for the car.What I would like to know is if I burn a MP3 CD,using 3KB or some other burning tool,would it play on the car player? The player i have supports ISO9660 level 1 or level 2 format,or Joliet or Romeo in the expansion format(whatever this means). I believe that Linux burning programs will use ISO9660 when I burn the disc,am I right. DREW Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Mounting CD
On Wednesday 28 Apr 2004 06:24, Stephen Kuhn wrote: On Wed, 2004-04-28 at 05:29, Drew Martin wrote: Hello All, I have installed MKD10(CE) then upgraded, using Easy URPMI to MKD10(Official). The problem I have is that I have some CD's,with video files on them.I would like to watch them,but I'm unable to browse the CD,to able to do this. How can I mount the CD so I can watch the video? Cheers, so you don't have a CD-ROM icon on your desktop? stephen kuhn - owner Hi Stephen, For some reason,I don't.I've tried adding one but I can never get to work,just end up with a load off error messages,when I try to mount the CD. Drew == illawarra computer services a kuhn media australia company http://kma.0catch.com -- * This message was composed on a 100% Microsoft free computer * We expressly refuse to utilise Microsoft DRM encoded documents -- To get back on your feet, miss two car payments. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Mounting CD
Hello All, I have installed MKD10(CE) then upgraded, using Easy URPMI to MKD10(Official). The problem I have is that I have some CD's,with video files on them.I would like to watch them,but I'm unable to browse the CD,to able to do this. How can I mount the CD so I can watch the video? Cheers, Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Apollon Part 2
Hello All, If anyone is interested I have managed to get Gnutella to work with Apollon.I'll post talk though,anyone wants it. It may not be the most consise,walk though ever,but I'm willing to give it ago. Cheers, Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Apollon (solved)
Hi Dan, Thank you for that,works a treat,connected to FastTrack 1st time. Cheers, Drew Create the directory FastTrack in /home/username/.giFT then copy the contents of /usr/share/giFT/FastTrack to the new directory you just made. Now change the permisions from root to user and it should work. You may have to open ports 1213 and 1214 in your firewall also HTH Regards, Dan Gordon Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Apollon
On Monday 19 Apr 2004 18:41, Ian Urie wrote: On Monday 19 Apr 2004 00:04, Dan Gordon wrote: On Sunday 18 April 2004 05:56 pm, Drew Martin wrote: Hi All, Sorry this has been asked before,but I have done a clean install of MKD 10.0 CE,and Apollon has stop working when I installed it.It will not connect to any sever.What do I need to download to make it work? Drew I am having the same sort of problem, for me it seems to be a problen with the fastrack plugin, openFT works but there are not many users listed. It worked fine in 9.2 but not so in 10. Fastrack plugin is working here under 10. FastTrack: Status:Online Users: 3.6 million Files Shared: 719.4 million Total Size Shared: 8.2 million GB :-) I wonder why this is?Because when I disable Fast Track,Apollon runs ok,but if I enable Fast Track it goes tits up and will not connect. This is the error I get when try to run it from Konsole: eQMetaObject::findSignal:KFileTreeView: Conflict with QListView::doubleClicked(QListViewItem*,const QPoint,int) qt KBackgroundIface KBookmarkManager-/home/drew/.kde/share/apps/konqueror/bookmarks.xml KBookmarkNotifier KDesktopIface (default) KDirNotify-1 KIO::Scheduler KScreensaverIface KonqUndoManager kdesktop ksycoca [EMAIL PROTECTED] *** GIFT-FATAL: unable to start 'FastTrack', no idea why (hopefully the protocol provided some info) *** Often times more information can be found in the log file or with the -v command line switch. *** GIFT-FATAL: unable to start 'FastTrack', no idea why (hopefully the protocol provided some info) *** Often times more information can be found in the log file or with the -v command line switch. *** GIFT-FATAL: unable to start 'FastTrack', no idea why (hopefully the protocol provided some info) *** Often times more information can be found in the log file or with the -v command line switch. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Apollon
Hi All, Sorry this has been asked before,but I have done a clean install of MKD 10.0 CE,and Apollon has stop working when I installed it.It will not connect to any sever.What do I need to download to make it work? Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] k3b
Hi All, How do I sort this? No support for ATAPI with cdrdao You will not be able to use all your reading devices as copy sources since there is at least one not configured to use SCSI emulation and your system does not support ATAPI with cdrdao. Solution: The best and recommended solution is to enable ide-scsi (SCSI emulation) for all devices. This way you won't have any problems. I know it would better if this was put right.I'm using an IDE DVD-ROM 16x and a TEAC CD-W58E writer.The DVD drive shows up as ATAPI and the TEAC as SCSI drive,in the interface section. Cheers, Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] KDE Crash
Hi All, I'm having problems booting into KDE 3.1.When I try to log on it gets to stage 3 of the log on and stops.I then get the error message nspluginscan has crashed and caused the signal 11(SIGSEGV) I can still log into Gnome and Xfce4,but I then have to kill nspluginscan,from KDE System Guard or I get the same error message.I have good idea what is the problem.I have KDE set up to look for new plugin's on log on. How do I turn this off,so I can log on into KDE?I need to this because I am trying to wean the wife and kids away from Windows,and they find KDE the easeist to use at the moment. Thank you for any help in advance. Cheers, Drew. PS MKD 9.2. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] KDE Crash
On Saturday 03 Apr 2004 12:07 pm, Lanman wrote: Drew Martin wrote: Hi All, I'm having problems booting into KDE 3.1.When I try to log on it gets to stage 3 of the log on and stops.I then get the error message nspluginscan has crashed and caused the signal 11(SIGSEGV) I can still log into Gnome and Xfce4,but I then have to kill nspluginscan,from KDE System Guard or I get the same error message.I have good idea what is the problem.I have KDE set up to look for new plugin's on log on. How do I turn this off,so I can log on into KDE?I need to this because I am trying to wean the wife and kids away from Windows,and they find KDE the easeist to use at the moment. Thank you for any help in advance. Cheers, Drew. PS MKD 9.2. Drew; have a look at kcontrol . You'll need to check under Web Browsing Plugins, and you shoudl find what you need there. Be advised that you'll have to repeat the procedure for each user, as well as root. You also might want to see if you can delete nsplugins completely from the system and install a fresh copy, since yours seems to be a bit buggy. A signal 11(SIGSEGV) can be caused by a lot of different problems, but quite often it's caused by a broken package or Ram. Let's hope it's just the package. BTW, have you considered upgrading to KDE 3.2 yet? That might solve some of your problems as well. Lanman Thanks, Thats sorted it out,I have turned off Scan on Log On,while sort the the plugins out. I was looking at installing 3.2,but it was going to take forever to download even with broadband.I'm going to wait until 10.0 Final is released and install that. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] KDE Crash
Hi All, I'm having problems booting into KDE 3.1.When I try to log on it gets to stage 3 of the log on and stops.I then get the error message nspluginscan has crashed and caused the signal 11(SIGSEGV) I can still log into Gnome and Xfce4,but I then have to kill nspluginscan,from KDE System Guard or I get the same error message.I have good idea what is the problem.I have KDE set up to look for new plugin's on log on. How do I turn this off,so I can log on into KDE?I need to this because I am trying to wean the wife and kids away from Windows,and they find KDE the easeist to use at the moment. Thank you for any help in advance. Cheers, Drew. PS MKD 9.2 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] test
test Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] test
test Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] realplayer
Hi all, When a click on a RL link on a wed page,to watch a film trailer I get an error messageRealAudio Broadcast plugin not found.Where can I get this plugin from,I have tried the RL site with no luck. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] realplayer
Thanks for everyone's help.I have RL installed and it work's on everything,but film links on web pages. Bryan,how to I run the mime script? I have installed all the plugins/codec's I could find,including the RL 9 ones,downloaded from RP site. Cheers, Drew - Original Message - From: Bryan Phinney [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, December 11, 2003 2:20 PM Subject: Re: [newbie] realplayer On Thursday 11 December 2003 07:21 am, Drew Martin wrote: Hi all, When a click on a RL link on a wed page,to watch a film trailer I get an error messageRealAudio Broadcast plugin not found.Where can I get this plugin from,I have tried the RL site with no luck. Drew If you download Realplayer 8 and install it, go to the directory where you put the player and there is a mimeinstall script that will install mimetypes as well as plugins for netscape. -- Bryan Phinney Software Test Engineer Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] NVIDIA driver pops up its ugly head
HarM, I have only just caught up with this thread.I use the same graphics card.Which I set up with the NVIDIA run. driver and complied the kernel. Would you like me to copy and paste the config 4 file,so you can compare them? Drew - Original Message - From: H.J.Bathoorn [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, December 04, 2003 5:18 PM Subject: Re: [newbie] NVIDIA driver pops up its ugly head On Thursday 04 December 2003 17:11, JoeHill wrote: On Thu, 4 Dec 2003 16:55:57 +0100 H.J.Bathoorn [EMAIL PROTECTED] wrote: I'm beginning to think it's either the card itself or the GLX rpm. *Sometimes*, for some weird reason, you have to put the complete path to the GLX library, so where it says: Load glx # 3D layer ...you may need to put: Load /usr/X11R6/lib/modules/extensions/libglx.so Yo, that line was there in the first place, I commented it out and added the Load glx line and checked the XFreelogs.libgl.so loads from the same location, that's not it. It's vexing...could be a permission thingy but I wouldn't know any other than dri in /etc/console.perms. Good luck, HarM -- Registered Linux User #197998 FSF Associate Member #901 ICQ #146191606 Mandrake HowTo's more: http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] pmsuspend2 writing to wrong partition
hi, i have an hp pavilion xt118. i am currently running mdk9.2 and am trying to get swsusp to work. when i try it it goes down ok but reboot is slow and comes back with no mouse or keyboard. in my searches i have heard that if you use a seperate swap partition (one that isnt being used for ram) for suspend it works ok. i would like to know if this is true and how to do it. i made a new swap partition and changed the resume=hda() line in the boot section to point to the new partition but i dont know how to make pmsuspend2 write to that swap partition because it only wants to write to the original swap at hda5, not the new one at hda8. thanks in advance, drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] pmsuspend2 question
hi, i have an hp pavilion xt118. i am currently running mdk9.2 and am trying to get swsusp to work. when i try it it goes down ok but reboot is slow and comes back with no mouse or keyboard. in my searches i have heard that if you use a seperate swap partition (one that isnt being used for ram) for suspend it works ok. i would like to know if this is true and how to do it. i made a new swap partition and changed the resume=hda() line in the boot section to point to the new partition but i dont know how to make pmsuspend2 write to that swap partition because it only wants to write to the original swap at hda5, not the new one at hda8. thanks in advance, drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Flash and Konquorer
Hi All, How do I make Flash 6 work with Konquorer?It works ok with Mozilla. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Flash and Konquorer
On Thursday 04 Dec 2003 1:05 pm, Derek Jennings wrote: On Thursday 04 Dec 2003 12:03 pm, Drew Martin wrote: Hi All, How do I make Flash 6 work with Konquorer?It works ok with Mozilla. Drew In konq settingsPlugins Check the plugins directory includes /usr/lib/mozilla-1.4/plugins (or whereever) Then press the 'Scan' button You will see the plugins detected in the 'Plugins' Tab derek Thanks for that,worked a threat. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Re: tnt2 to geforce2
Thanks Greg, Install went as planned,no problems at all.Cards was pick during boot,and walk me thought the set up. Drew - Original Message - From: Drew Martin [EMAIL PROTECTED] To: Mandrake [EMAIL PROTECTED] Sent: Saturday, November 29, 2003 2:56 PM Subject: tnt2 to gefoce2 Hello All, I have just been given a 64meg GeForce to replace my old and flaky TNT2.Will I have any problems swapping them over?I have the Nvidia Drivers installed(from their web site),and had compile the kernel,to make them work. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Re: tnt2 to geforce2
Thanks Greg, Install went as planned,no problems at all.Cards was pick during boot,and walk me thought the set up. Drew - Original Message - From: Drew Martin [EMAIL PROTECTED] To: Mandrake [EMAIL PROTECTED] Sent: Saturday, November 29, 2003 2:56 PM Subject: tnt2 to gefoce2 Hello All, I have just been given a 64meg GeForce to replace my old and flaky TNT2.Will I have any problems swapping them over?I have the Nvidia Drivers installed(from their web site),and had compile the kernel,to make them work. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] tnt2 to gefoce2
Hello All, I have just been given a 64meg GeForce to replace my old and flaky TNT2.Will I have any problems swapping them over?I have the Nvidia Drivers installed(from their web site),and had compile the kernel,to make them work. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] test
test-no mail for 12 hours Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Instant Message In Mandrake 9.2
Hi All, Tried to send this link the other day,seems I was unsubed like everyone else. I have noticed that a lot of you have been having the same problem that I have had;the inability to install the new versions of Gaim or Kopete,so you can use MSN under Mandrake. http://norlug.org/~chipster/rpm_index.pxml?cat=4 I found the above link when wondering around the net,Gaim works with every IM,I have thrown at it and installs with no dependence issues(it does in 9.2 anyway,don't know about the others). Hope this is of some help, Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Nvidia and 9.2
Hi Greg, I have now sorted it out and have the drivers running,thanks for your help. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Nvidia and 9.2
Hello All, Has any one been able to install the Nvidia drivers on 9.2? I have download the drivers from Nvidia's site,shut down X,and found the drivers(using MC,what a brilliant program),but when I get to the install,things start to go wrong.No correct kernel found,do want to try and get one from the Nvidia site,none found.Install failed,please make sure you have the correct kernel-source. I downloaded the kernel-source from Mandrake,the install gets to the build kernel,it starts OK and gets to about 75% and then fails. Has anyone got a clue how to sort this? Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Nvidia and 9.2
Hi Greg, I have just check the kernel's on my PC(by looking in MCC remove programs).I have kernel-2.4.22.10mdk,kernel-2.4.22.6mdk and kernel-source 2.4.22-21mdk,so none of it match's. Is there any way of making everything match?The only thing I can think off is doing is a fresh full install instead of an upgrade. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] RPM'S and POP3
Hello All, The RPM stuff was about what I expected,it's not a very good idea to use older RPM when using a more up to date Distro(but it can be done if careful). POP 3 was sorted when I managed to get into NTL's account section and set up so more accounts,I've been trying to do this for a while,and all I use to get was time-outs. Cheers, Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Power Pack
Hi All, If I buy 9.2 Power Pack from Mandrake,and do a upgrade from 9.2rc2 will such things as the Nvidia Drivers be install during the upgrade?If not will a full install install the drivers and other bits and pieces? Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Power Pack
Hello Greg, Thanks for that,it looks like I will Power Pack at some point soon. Drew - Original Message - From: Greg Meyer [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, October 24, 2003 2:30 PM Subject: Re: [newbie] Power Pack On Friday 24 October 2003 08:36 am, Drew Martin wrote: Hi All, If I buy 9.2 Power Pack from Mandrake,and do a upgrade from 9.2rc2 will such things as the Nvidia Drivers be install during the upgrade?If not Only if they are already installed, but since 9.2 will install a new kernel, you will probably have to just see what happens. If it doesn't get installed, it should just be as easy as typing 'urpmi NVIDIA_kernel will a full install install the drivers and other bits and pieces? Drew Yes. Just watch out that all the KDE apps you want get installed, whether you choose upgrade or do a fresh install. mandrake finally did some package splitting in KDE so you don't have to install everything to get kmail, but nothing is getting installed by default, so you might want to make sure you go through the individual package selection step. -- /g Outside of a dog, a man's best friend is a book, inside a dog it's too dark to read -Groucho Marx Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] RPM'S(shoot me)
Hello All, Are RPM's back compatible?The reason I ask is cause at some point soon I will upgrading from 9.1 to 9.2.I wish to add Texstar's 9.1 RPM's to my software sources,but will this really make a mess of my install? I do realise that there is no way I could use Texstar's kernel update's,but is there any reason I would not be able to install things like RP8 and Flash(plug-in ect) from his site? Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] pop3
Hi All, Does anyone know of a free and reliable POP3/SMTP e-mail account,which I can use with KMail? Lycos in their wisdom have gone Hotmail,and as far as I can see can not to made to work with Linux.My ISP has given a useless user name and a password I can never remeber.The ISP account all I get is spam anyway so I just bin it all. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Nvidia drivers
Hello All, I'm trying(very badly) to install the Nvidia drivers on to our pc.I'm running 9.2 rc2,p3 500,256ram. I can shut down the x-sever with no problems,but when I cd to file location,I get no such dicretory or this a diretory and can not do anything. I had no problems in 9.1,is this a bug in 9.2 or am I doing something stupid? Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Nvidia drivers
Hi Mike, I'm trying to install he latest version from the Nvidia wed site,and installing from level 3. what I have done is log into RL3,then try to cd to /home/drew/Documents;which where the drivers are. At which point I would log in to root,to install them,but can not get to the file location. I have never used mc as far as I know I got the driver to install under 9.1,with out much problems,by using the method above. Drew - Original Message - From: mike [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, October 13, 2003 1:29 PM Subject: Re: [newbie] Nvidia drivers which version of the driver are you trying? have you checked the permissions ? did you install in run level 3 ? do you know how to use mc ( midnight commander ) ? Drew Martin wrote: Hello All, I'm trying(very badly) to install the Nvidia drivers on to our pc.I'm running 9.2 rc2,p3 500,256ram. I can shut down the x-sever with no problems,but when I cd to file location,I get no such dicretory or this a diretory and can not do anything. I had no problems in 9.1,is this a bug in 9.2 or am I doing something stupid? Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com -- Mike McNeese Springdale, Arkansas USA == Dual booting 98lite;MDK 9.1 stock kernel Kde 3.1 Registered Linux User #248955 liquid/acqua Theme == If obstacles are what you see in your path... Then you have lost sight of your goal! Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Gaim Question
crak600 wrote: On Sunday 03 August 2003 11:03 pm, John Drouhard wrote: Do you think you could take the Reply to thing off, it's not necessary. sorry. it's done now. someone else pointed that out to me too. Anyway, you should just be able to highlight a link and then press the middle mouse button in the conversation window, and it should paste it by itself automagically. regular 2 button mouse. never thought to click both buttons because copy/paste worked everywhere else except in Gaim. Thanks Dennis (got your reply offlist because of my reply to thing) and thanks John. Mike Hmm, mine works fine here with right click+ paste. Also works with middle click or Ctrl-V. Which version are you using, the gaim-0.59.8-2mdk package that comes with 9.1? Gaim just did a lot of updating to gtk2, so you might want to try a newer version from cooker (gaim-0.64-3mdk). I seem to remember I didn't like gaim-0.59.8 much. Also, I find the rpms that Gaim itself distributes to be just squiffy. I am using 0.64 now, but am in the process of updating to 0.66. They make mdk rpms. Whatever you do, don't use .65- I think it was pretty broken. Here's the link to find packages: http://sourceforge.net/project/showfiles.php?group_id=235 hth, -- Drew Stile -+- johnnydeppert at myrealbox dot com -My browser blocks popups and has tabbed browsing- does yours? Download Mozilla at www.mozilla.org! -101 things that Mozilla can do that IE cannot: http://www.xulplanet.com/ndeakin/arts/reasons.html Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Im Stupid So Shoot Me (MD5 sums
Aron Smith wrote: anybody can tell me what md5sums are for on the Mandrake 9.2 will I need them ? thanks gang smitty Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com They're if you want to verify that the isos you downloaded were not corrupted in some way. Type man md5sum in a terminal to learn more. In general you can do a md5sum yadda.iso and compute an md5sum see if it matches with what's on the website. Or you can save the list of the three isos their md5sums from the webpage in a textfile named sumfoo. Save it in the same directory as the isos you downloaded and type md5sum -c sumfoo to see if the isos match the md5sums that are in the list you just gave it. -- Drew Stile -+- johnnydeppert at myrealbox dot com -My browser blocks popups and has tabbed browsing- does yours? Download Mozilla at www.mozilla.org! -101 things that Mozilla can do that IE cannot: http://www.xulplanet.com/ndeakin/arts/reasons.html Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] X sever
Hi All, How do I turn off Xsever?So I can install some new video driver.I have tied everything I can think off. I'm running MDK 9.1,I've work out how to get to the folder in a Terminal,bu keep getting the error messageyou apper to be running a X sever please,turn off. The drivers are the new Nvidia ones for my TNT2 Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] X sever
On Wednesday 23 Jul 2003 3:34 pm, Stephen Kuhn wrote: On Wed, 2003-07-23 at 23:42, drew martin wrote: Hi All, How do I turn off Xsever?So I can install some new video driver.I have tied everything I can think off. I'm running MDK 9.1,I've work out how to get to the folder in a Terminal,bu keep getting the error messageyou apper to be running a X sever please,turn off. The drivers are the new Nvidia ones for my TNT2 Drew Set your system to boot into runlevel 3 - after that, then you can safely install the video driver - and test it by starting X with startx - then once you're satisfied that the driver works correctly, reset the system runlevel to 5 (graphical login) Hi Stephen, How do you do this?Dummy needs walk thought cause I'm complete Newbie. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] CD3
That worked. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] RPMS
Hello All, I've just to reinstall(after a fall out with some Nvidia Drivers).The problem I'm having is,when aclick on a RPM that I have download from the net,I get the open with box come up.If I set the install up thought Mandrake Control Centre,it worksish(I have to have the program name in there),but if I need to install any RPM which is needed by the program I'm installing,it does not work ie dependences Thank you for any help given. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Broken KDE
Hello All, I've broken KDE somehow,I've lost the ability to install RPM's from it.Everything works OK in Gnome. Has anyone got any idea how to fix it? Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] test
test Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] test
test Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] test
test -- Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] test
test Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie]
subscribe newbie
[newbie] dup/bad blocks-won't boot
When I boot-up I get the following: /dev/hdb6: Duplicate/bad block(s) in inode 746326:/dev/hdb6: 64/dev/hdb6: /dev/hdb6: Pass 1C: Scan directories for inodes with dup blocks. /dev/hdb6: Pass iD: Ronciling duplicate blocks /dev/hdb6: (There are 1 inodes containing duplicate/bad blocks.) /dev/hdb6: File /root/.kde/share/config/kdehelprc.1 (inode #746326...) has 1 duplicate block(s), shared with 1 file(s): /dev/hdb6: filesystem metadata I get dumped into a shell. From there, fsck doesn't help and I can't erase or move the kde file. Any suggestions would be GREATLY appreciated. --Drew-- Get free email and a permanent address at http://www.netaddress.com/?N=1
Re: [newbie] Problems updating 7.1 to 7.2
I, also, have encountered network trouble with 7.2 after using the update function. Before my update, my network was working fine and my DSL connection was live and kicking. After the update, no network, no DSL. Any ideas? Drew Lane - Original Message - From: "Joergen Traun" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, November 08, 2000 8:02 AM Subject: [newbie] Problems updating 7.1 to 7.2 Hi Yesterday I updated one of my machines from mandrake 7.1 to mandrake 7.2. When i ran the instalation program I used the update funktion, but when finished I have got following problems: 1 - I have to start the network manual every time i reboot the machine. 2 - KDE is not updated the right way, no KDE program (beside konsole) works. Can anybody tell me how I fix those problems? - Joergen Traun.
Re: [newbie] Mandrake 7.2 and nvidia
I installed Mandrake 7.2 with an nVidia RIVA TNT2 M64 card, and all went well. I haven't tried any of the drivers from NVidia. - Original Message - From: "Joe Collard" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, November 08, 2000 12:12 PM Subject: [newbie] Mandrake 7.2 and nvidia I am trying to get XFree86 4.0.1 to work with my Diamond Viper V770 (nvidia TNT2) video card. Has anyone sucessfully installed Mandrake 7.2 with the nvidia drivers from their website for TNT2. Any help is much appreciated. Joe
Re: [[newbie] X setiathome]
Andrew, I installed the setiathome client successfully on 2 computers this weekend. I downloaded the binary tar which contained the main setiathome executable and the xsetiathome executable. Do you want any specifics pertaining to my istallation, what I did, the display, etc? I am using Mandrake 7.1 also. --Drew-- Andrew Scotchmer [EMAIL PROTECTED] wrote: Hi, Has anyone successfully installed the X setiathome screen. I have just downloaded the text version as I could not get the X version to work at all. I am using Mandrake 7.1 now. Thanks in advance -- /Andrew Scotchmer\ ICQ#50762100 [EMAIL PROTECTED] \---composed on PINE-/ Get free email and a permanent address at http://www.netaddress.com/?N=1
No Subject
I want to know how to uninstall netscape with Mandrake 6.0. Also, if it is possible, I would like to know if I can upgrade to 6.1 without having to have a large space removable media drive. As for the netscape problem, I downloaded Netscape Communicator 4.7 for Linux(glibc). Is this the right file for me? There are other such files, but I hate to list them all. I thank you for your support. If you have it, I would appreciate it if you would not mind sending me an ICQ message. Drew Jackman [EMAIL PROTECTED] ICQ:20177604
Re: [newbie] Partition setup help
I can tell you that there is not correct way to setup your partitions. But, I suggest making Windows the first, ext2 second, and swap third. I am also a beginner. If you have ICQ, please ICQ me at 20177604 Drew Jackman [EMAIL PROTECTED] On Tue, 26 Oct 1999, you wrote: I am so close to setting this up, I can almost taste it. I guess you get delusional after looking at the computer screen for 12 hours straight. Anyway, I can't quite get my hard drive partitioned correctly. I have 12.9 GB hard drive, and want to use approximately 10 GB for win98, and 2.9 for Mandrake Linux 6.1. These are the two setups that seem to be the closest to correct. 1. hde1, 4 GB, Win95 FAT32 hde5, 2 GB, Linux Native - first part of an extended partition (hde2) hde6, 128MB, Linux Swap - second part of an extended partition (hde2) hde7, 6 GB, FAT16 = 32MB or some sort of DOS partition - third part of an extended partition (hde2) This one worked well. LILO booted both Win98, and Linux. The only problem was, after I formatted hde7 as a FAT32 in Win98, Win98 took FOREVER to boot, and after it did, it couldn't see hde7. The only thing I can think of, is that Linux does not support FAT32 as a logical partition in an extended partition, wrote something to the disk and then Win98 couldn't figure out what was going on. Of course, I could be completely wrong, and have no idea what I am talking about. 2. hde1, 4 GB, Win95 FAT32 hde2, 16MB, Linux Native - I did this and mounted it as /boot because it's my understanding that LILO must have /boot within the first 8GB of a hard drive. hde5, 2 GB, Linux Native - first part of an extended partition (hde3) hde6, 128MB, Linux Swap - second part of an extended partitiion (hde3) hde4, 6 GB, some sort of DOS extended partition This setup allowed me to boot both Win 98 and Linux. The problem with this one was that it seems like Win98 only supports ONE primary partition and ONE extended partition per disk. I have 2 primary and 2 extended. Again, I could be completely wrong. No matter what I did with hde4, Win 98 couldn't see it. So basically, I need to know how to partition my 12.9 GB hard drive to have approximately 10 GB for win98, and 2.9 for Mandrake Linux 6.1. Any help or suggestions are appreciated. Collin Davidson
[newbie] newbie remove
newbie remove
