XenServer version supported by ACS 4.14

[Luis Martinez]

Hi

ACS website is not loading for me, I am trying to find what versions of 
XenServer/XCP-NG are supported.


Thank you

VM's are slow

[Luis Martinez]

Hi Group

I have CS 4.13.1.0-1 running with the following hardware

1 Manager server with 4 cores and 8 in RAM

1 KVM server with 24 cores and 64G of RAM

1 FREENAS with 4 disks of 3T in Raid 1 with 12 G of RAM


I am able to download CentOS7 and create VM but it feels a little slow 
with 6 cores and 8G of RAM but with windows it's worse, I created a VM 
with 6 cores and 8 G of RAM and it's very slow and the % of use in the 
VM is 45 as well as the network,  just checking if somebody had the same 
problem and what could I check to fix this problem.



Thank you,

Luis Martinez.

Re: Testing CS 4.13.1

[Luis Martinez]

Hi, did you get the log file I attached? any advice?

Thank you

On 5/18/2020 4:59 PM, Sergey Levitskiy wrote:

Plz share full management-server.log since your snippet doesn't have relevant 
lines.

Thanks,
Sergey


On 5/18/20, 1:25 PM, "Luis Martinez"  wrote:

 This is the error I see in the logs, I am trying to ssh to the VM for
 secondary storage but i am not able to do it.


 2020-05-18 16:23:26,778 DEBUG [c.c.c.ConsoleProxyManagerImpl]
 (consoleproxy-1:ctx-195a645d) (logid:e873b8f5) Zone 1 is ready to launch
 console proxy
 2020-05-18 16:23:29,820 DEBUG [c.c.s.StatsCollector]
 (StatsCollector-2:ctx-8b9729d8) (logid:d7872342) AutoScaling Monitor is
 running...
 2020-05-18 16:23:30,138 DEBUG [c.c.s.StatsCollector]
 (StatsCollector-5:ctx-a1b22863) (logid:bd79141a) HostStatsCollector is
 running...
 2020-05-18 16:23:30,195 DEBUG [c.c.a.t.Request]
 (StatsCollector-5:ctx-a1b22863) (logid:bd79141a) Seq
 1-1544453197211369507: Received:  { Ans: , MgmtId: 266682308174733, via:
 1(cloudstackvm1), Ver: v1, Flags: 10, { GetHostStatsAnswer } }
 2020-05-18 16:23:30,522 DEBUG [c.c.s.StatsCollector]
 (StatsCollector-3:ctx-ef56a510) (logid:1a0c1267) StorageCollector is
 running...
 2020-05-18 16:23:30,530 DEBUG [c.c.s.StatsCollector]
 (StatsCollector-3:ctx-ef56a510) (logid:1a0c1267) *There is no secondary
 storage VM for secondary storage host nfs://10.0.8.10/mnt/CS01/secondary*
 2020-05-18 16:23:30,533 DEBUG [c.c.h.o.r.Ovm3HypervisorGuru]
 (StatsCollector-3:ctx-ef56a510) (logid:1a0c1267)
 getCommandHostDelegation: class com.cloud.agent.api.GetStorageStatsCommand
 2020-05-18 16:23:30,533 DEBUG [c.c.h.XenServerGuru]
 (StatsCollector-3:ctx-ef56a510) (logid:1a0c1267) We are returning the
 default host to execute commands because the command is not of Copy type.
 2020-05-18 16:23:30,612 DEBUG [c.c.a.t.Request]
 (StatsCollector-3:ctx-ef56a510) (logid:1a0c1267) Seq
 1-1544453197211369508: Received:  { Ans: , MgmtId: 266682308174733, via:
 1(cloudstackvm1), Ver: v1, Flags: 10, { GetStorageStatsAnswer } }
 2020-05-18 16:23:33,611 DEBUG [c.c.a.m.AgentManagerImpl]
 (AgentManager-Handler-3:null) (logid:) Ping from Routing host
 1(cloudstackvm1)

 On 5/18/2020 2:43 PM, Rohit Yadav wrote:
 > Hi Luis,
 >
 > Please use the correct systemvmtemplate version/link for CloudStack 
4.13.1.0.
 >
 > Refer to the install/upgrade docs such as 
http://docs.cloudstack.apache.org/en/4.13.1.0/upgrading/upgrade/upgrade-4.12.html
 >
 > Regards.
 >
 > Regards,
 > Rohit Yadav
 >
 > 
 > From: Luis Martinez 
 > Sent: Monday, May 18, 2020 11:07:20 PM
 > To: users@cloudstack.apache.org 
 > Subject: Testing CS 4.13.1
 >
 > Hi Group
 >
 > I need help, I am installing 4.13.1 for testing, installation is fine
 > but secondary storage is not working, I tried to ssh to the VM and I am
 > unable to do it, I used the following lines in different installations
 > to see if this fixes the problem but no. how can I troubleshoot this? or
 > am I using the wrong version?
 >
 >
 > 
/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt
 > -m /mnt/secondary -u
 > 
http://download.cloudstack.org/systemvm/4.11/systemvmtemplate-4.11.3-kvm.qcow2.bz2
 > -h kvm -F
 > 
/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt
 > -m /mnt/secondary -u
 > 
http://download.cloudstack.org/systemvm/4.11/systemvmtemplate-4.11.1-kvm.qcow2.bz2
 > -h kvm -F
 > 
/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt
 > -m /mnt/secondary -u
 > 
http://download.cloudstack.org/systemvm/4.11/systemvmtemplate-4.11.0-kvm.qcow2.bz2
 > -h kvm -F
 >
 > Thank you in Advance.
 >
 >
 > rohit.ya...@shapeblue.com
 > www.shapeblue.com
 > 3 London Bridge Street,  3rd floor, News Building, London  SE1 9SGUK
 > @shapeblue
 >
 >
 >

Re: Testing CS 4.13.1

[Luis Martinez]

This is the error I see in the logs, I am trying to ssh to the VM for 
secondary storage but i am not able to do it.



2020-05-18 16:23:26,778 DEBUG [c.c.c.ConsoleProxyManagerImpl] 
(consoleproxy-1:ctx-195a645d) (logid:e873b8f5) Zone 1 is ready to launch 
console proxy
2020-05-18 16:23:29,820 DEBUG [c.c.s.StatsCollector] 
(StatsCollector-2:ctx-8b9729d8) (logid:d7872342) AutoScaling Monitor is 
running...
2020-05-18 16:23:30,138 DEBUG [c.c.s.StatsCollector] 
(StatsCollector-5:ctx-a1b22863) (logid:bd79141a) HostStatsCollector is 
running...
2020-05-18 16:23:30,195 DEBUG [c.c.a.t.Request] 
(StatsCollector-5:ctx-a1b22863) (logid:bd79141a) Seq 
1-1544453197211369507: Received:  { Ans: , MgmtId: 266682308174733, via: 
1(cloudstackvm1), Ver: v1, Flags: 10, { GetHostStatsAnswer } }
2020-05-18 16:23:30,522 DEBUG [c.c.s.StatsCollector] 
(StatsCollector-3:ctx-ef56a510) (logid:1a0c1267) StorageCollector is 
running...
2020-05-18 16:23:30,530 DEBUG [c.c.s.StatsCollector] 
(StatsCollector-3:ctx-ef56a510) (logid:1a0c1267) *There is no secondary 
storage VM for secondary storage host nfs://10.0.8.10/mnt/CS01/secondary*
2020-05-18 16:23:30,533 DEBUG [c.c.h.o.r.Ovm3HypervisorGuru] 
(StatsCollector-3:ctx-ef56a510) (logid:1a0c1267) 
getCommandHostDelegation: class com.cloud.agent.api.GetStorageStatsCommand
2020-05-18 16:23:30,533 DEBUG [c.c.h.XenServerGuru] 
(StatsCollector-3:ctx-ef56a510) (logid:1a0c1267) We are returning the 
default host to execute commands because the command is not of Copy type.
2020-05-18 16:23:30,612 DEBUG [c.c.a.t.Request] 
(StatsCollector-3:ctx-ef56a510) (logid:1a0c1267) Seq 
1-1544453197211369508: Received:  { Ans: , MgmtId: 266682308174733, via: 
1(cloudstackvm1), Ver: v1, Flags: 10, { GetStorageStatsAnswer } }
2020-05-18 16:23:33,611 DEBUG [c.c.a.m.AgentManagerImpl] 
(AgentManager-Handler-3:null) (logid:) Ping from Routing host 
1(cloudstackvm1)


On 5/18/2020 2:43 PM, Rohit Yadav wrote:

Hi Luis,

Please use the correct systemvmtemplate version/link for CloudStack 4.13.1.0.

Refer to the install/upgrade docs such as 
http://docs.cloudstack.apache.org/en/4.13.1.0/upgrading/upgrade/upgrade-4.12.html

Regards.

Regards,
Rohit Yadav


From: Luis Martinez 
Sent: Monday, May 18, 2020 11:07:20 PM
To: users@cloudstack.apache.org 
Subject: Testing CS 4.13.1

Hi Group

I need help, I am installing 4.13.1 for testing, installation is fine
but secondary storage is not working, I tried to ssh to the VM and I am
unable to do it, I used the following lines in different installations
to see if this fixes the problem but no. how can I troubleshoot this? or
am I using the wrong version?


/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt
-m /mnt/secondary -u
http://download.cloudstack.org/systemvm/4.11/systemvmtemplate-4.11.3-kvm.qcow2.bz2
-h kvm -F
/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt
-m /mnt/secondary -u
http://download.cloudstack.org/systemvm/4.11/systemvmtemplate-4.11.1-kvm.qcow2.bz2
-h kvm -F
/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt
-m /mnt/secondary -u
http://download.cloudstack.org/systemvm/4.11/systemvmtemplate-4.11.0-kvm.qcow2.bz2
-h kvm -F

Thank you in Advance.


rohit.ya...@shapeblue.com
www.shapeblue.com
3 London Bridge Street,  3rd floor, News Building, London  SE1 9SGUK
@shapeblue
   
  

Re: Testing CS 4.13.1

[Luis Martinez]

Hi Rohit,

I did use that one also and I get the same problem, my set up is not an 
upgrade is a new installations.


On 5/18/2020 2:43 PM, Rohit Yadav wrote:

Hi Luis,

Please use the correct systemvmtemplate version/link for CloudStack 4.13.1.0.

Refer to the install/upgrade docs such as 
http://docs.cloudstack.apache.org/en/4.13.1.0/upgrading/upgrade/upgrade-4.12.html

Regards.

Regards,
Rohit Yadav


From: Luis Martinez 
Sent: Monday, May 18, 2020 11:07:20 PM
To: users@cloudstack.apache.org 
Subject: Testing CS 4.13.1

Hi Group

I need help, I am installing 4.13.1 for testing, installation is fine
but secondary storage is not working, I tried to ssh to the VM and I am
unable to do it, I used the following lines in different installations
to see if this fixes the problem but no. how can I troubleshoot this? or
am I using the wrong version?


/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt
-m /mnt/secondary -u
http://download.cloudstack.org/systemvm/4.11/systemvmtemplate-4.11.3-kvm.qcow2.bz2
-h kvm -F
/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt
-m /mnt/secondary -u
http://download.cloudstack.org/systemvm/4.11/systemvmtemplate-4.11.1-kvm.qcow2.bz2
-h kvm -F
/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt
-m /mnt/secondary -u
http://download.cloudstack.org/systemvm/4.11/systemvmtemplate-4.11.0-kvm.qcow2.bz2
-h kvm -F

Thank you in Advance.


rohit.ya...@shapeblue.com
www.shapeblue.com
3 London Bridge Street,  3rd floor, News Building, London  SE1 9SGUK
@shapeblue
   
  

Testing CS 4.13.1

[Luis Martinez]

Hi Group

I need help, I am installing 4.13.1 for testing, installation is fine 
but secondary storage is not working, I tried to ssh to the VM and I am 
unable to do it, I used the following lines in different installations 
to see if this fixes the problem but no. how can I troubleshoot this? or 
am I using the wrong version?



/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt 
-m /mnt/secondary -u 
http://download.cloudstack.org/systemvm/4.11/systemvmtemplate-4.11.3-kvm.qcow2.bz2 
-h kvm -F
/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt 
-m /mnt/secondary -u 
http://download.cloudstack.org/systemvm/4.11/systemvmtemplate-4.11.1-kvm.qcow2.bz2 
-h kvm -F
/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt 
-m /mnt/secondary -u 
http://download.cloudstack.org/systemvm/4.11/systemvmtemplate-4.11.0-kvm.qcow2.bz2 
-h kvm -F


Thank you in Advance.

Questions about your test environments.

[Luis Martinez]

Hi Group

I am curious about how you run your test environments in Shape Blue or 
anybody in the group.


1.- Do you use hardware to install and configure your test environments 
or do you use virtual machines and what do you use ?


2.- Do you run some performance test?

3.- Can you share a description of hardware you are using?


I use XCP-NG to create as many VMs I need to run my test then I move it 
to bare metal as follows


-- 1 8 core xeon with 30G RAM where I run a VM for the manager

--1 8 core xeon with 16G RAM with FREENAS for primary and secondary

--1 24 cores XEON with 64 G RAM for the host, this is where the VM's run

Thank you,

Luis Martinez.

Re: CloudStack - Ubuntu/KVM (all in one management-server/host) - OS Upgrade w/o updating System VMs

[Luis]

Dont forget to downgrade the database connector or it will not work

Sent from Yahoo Mail on Android 
 
  On Sun, May 17, 2020 at 3:47 PM, David Merrill 
wrote:   Hi All,

I've got a CloudStack 4.11.2 lab running on a single host & made the (dumb) 
mistake of running OS updates without updating the system VMs beforehand. The 
CloudStack packages upgraded to 4.11.3 just fine but now CloudStack management 
services wont start (see below).

Here's my question:

 - Is it *at all* possible to rectify this (now, post package updates) by 
getting the new system templates in via the CLI tools 
(/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt)?
 - The error on the logs *seems* simple, if management could find the new 
template maybe things could proceed?

My impression is no given research I've done so far which seems to amount to:

 - roll back to 4.11.2
 - use the pre-upgrade dump of the DB (which I made)
 - start management services
 - get the new system VMs properly (like I should have in the first place)
 - upgrade to 4.11.3

Humbly (& slightly embarrassed) yours, and thanks,
David

David Merrill
Senior Systems Engineer,
Managed and Private/Hybrid Cloud Services
OTELCO
92 Oak Street, Portland ME 04101
office 207.772.5678 
http://www.otelco.com/cloud-and-managed-services
 
Confidentiality Message
The information contained in this e-mail transmission may be confidential and 
legally privileged. If you are not the intended recipient, you are notified 
that any dissemination, distribution, copying or other use of this information, 
including attachments, is prohibited. If you received this message in error, 
please call me at 207.772.5678  so this error can be 
corrected.
 

On 5/17/20, 8:05 AM, "engineer...@reliablenetworks.com" 
 wrote:

    2020-05-17 07:35:15,659 INFO  [o.e.j.s.AbstractConnector] (Thread-1:null) 
(logid:) Stopped ServerConnector@27808f31{HTTP/1.1,[http/1.1]}{0.0.0.0:8080}
    2020-05-17 07:35:15,664 INFO  [o.e.j.s.session] (Thread-1:null) (logid:) 
Stopped scavenging
    2020-05-17 07:35:15,665 INFO  [o.e.j.s.h.ContextHandler] (Thread-1:null) 
(logid:) Stopped o.e.j.s.h.MovedContextHandler@d6da883{/,null,UNAVAILABLE}
    2020-05-17 07:35:15,669 INFO  [o.e.j.s.h.ContextHandler] (Thread-1:null) 
(logid:) Stopped 
o.e.j.w.WebAppContext@7bc1a03d{/client,null,UNAVAILABLE}{/usr/share/cloudstack-management/webapp}
    2020-05-17 07:35:21,648 INFO  [o.a.c.ServerDaemon] (main:null) (logid:) 
Server configuration file found: /etc/cloudstack/management/server.properties
    2020-05-17 07:35:21,655 INFO  [o.a.c.ServerDaemon] (main:null) (logid:) 
Initializing server daemon on null:8080, with https.enabled=false, 
https.port=8443, context.path=/client
    2020-05-17 07:35:21,666 INFO  [o.e.j.u.log] (main:null) (logid:) Logging 
initialized @713ms to org.eclipse.jetty.util.log.Slf4jLog
    2020-05-17 07:35:21,857 INFO  [o.e.j.s.Server] (main:null) (logid:) 
jetty-9.4.z-SNAPSHOT, build timestamp: 2017-11-21T16:27:37-05:00, git hash: 
82b8fb23f757335bb3329d540ce37a2a2615f0a8
    2020-05-17 07:35:21,893 INFO  [o.e.j.s.AbstractNCSARequestLog] (main:null) 
(logid:) Opened /var/log/cloudstack/management/access.log
    2020-05-17 07:35:22,007 INFO  [o.e.j.w.StandardDescriptorProcessor] 
(main:null) (logid:) NO JSP Support for /client, did not find 
org.eclipse.jetty.jsp.JettyJspServlet
    2020-05-17 07:35:22,042 INFO  [o.e.j.s.session] (main:null) (logid:) 
DefaultSessionIdManager workerName=node0
    2020-05-17 07:35:22,042 INFO  [o.e.j.s.session] (main:null) (logid:) No 
SessionScavenger set, using defaults
    2020-05-17 07:35:22,044 INFO  [o.e.j.s.session] (main:null) (logid:) 
Scavenging every 60ms
    2020-05-17 07:35:37,117 INFO  [o.a.c.s.m.m.i.DefaultModuleDefinitionSet] 
(main:null) (logid:) Loading module context [bootstrap] from URL 
[jar:file:/usr/share/cloudstack-management/lib/cloudstack-4.11.3.0.jar!/META-INF/cloudstack/bootstrap/spring-bootstrap-context.xml]
    2020-05-17 07:35:37,118 INFO  [o.a.c.s.m.m.i.DefaultModuleDefinitionSet] 
(main:null) (logid:) Loading module context [bootstrap] from URL 
[jar:file:/usr/share/cloudstack-management/lib/cloudstack-4.11.3.0.jar!/META-INF/cloudstack/bootstrap/spring-bootstrap-context-inheritable.xml]
    2020-05-17 07:35:37,298 DEBUG [c.c.u.c.EncryptionSecretKeyChecker] 
(main:null) (logid:) Encryption Type: file
    2020-05-17 07:35:37,342 INFO  [c.c.u.LogUtils] (main:null) (logid:) log4j 
configuration found at /etc/cloudstack/management/log4j-cloud.xml
    2020-05-17 07:35:37,367 INFO  [o.a.c.s.m.m.i.DefaultModuleDefinitionSet] 
(main:null) (logid:) Loaded module context [bootstrap] in 250 ms
    2020-05-17 07:35:37,368 INFO  [o.a.c.s.m.m.i.DefaultModuleDefinitionSet] 
(main:null) (logid:) Module Hierarchy: bootstrap
    2020-05-17 07:35:37,368 INFO  [o.a.c.s.m.m.i.DefaultModuleDefinitionSet] 
(main:null) (logid:) Module Hierarchy:  system
    2020-05-17 07:35:37,368 INFO  [o.a.c.s.m.m.i.DefaultModuleDefinitionSet] 

Re: CloudStack 4.13.1.0 download

[Luis Martinez]

Thank you for the information.

On 5/15/2020 3:01 PM, Andrija Panic wrote:

Hi Luis,

there is a big blue note as following - pay attention to the last part:

The Apache CloudStack official releases are source code. As such there are
no ‘official’ binaries available. The full installation guide describes how
to take the source release and generate RPMs and and yum repository. This
guide attempts to keep things as simple as possible, and thus we are using
one of the community-provided yum repositories.
**Furthermore, this example assumes a 4.11 Cloudstack install - substitute
versions as needed.**

On Fri, 15 May 2020 at 20:08, Luis Martinez 
wrote:


Hi Group

I am reading the documentation for 4.13.1.0 and the repository is
pointing to 4.11, is this correct?


http://docs.cloudstack.apache.org/en/4.13.1.0/quickinstallationguide/qig.html

[cloudstack]
name=cloudstack
baseurl=http://download.cloudstack.org/centos/7/4.11/
enabled=1
gpgcheck=0 I also tried to change it to 4.13.13.1.0 but it's not working
another question, do I need to use systemvmtemplate-4.11.3-kvm.qcow2.bz2
with 4.13.1.0 or can I use a recent qcow file? thank you for yout help.

CloudStack 4.13.1.0 download

[Luis Martinez]

Hi Group

I am reading the documentation for 4.13.1.0 and the repository is 
pointing to 4.11, is this correct?


http://docs.cloudstack.apache.org/en/4.13.1.0/quickinstallationguide/qig.html

[cloudstack]
name=cloudstack
baseurl=http://download.cloudstack.org/centos/7/4.11/
enabled=1
gpgcheck=0 I also tried to change it to 4.13.13.1.0 but it's not working 
another question, do I need to use systemvmtemplate-4.11.3-kvm.qcow2.bz2 
with 4.13.1.0 or can I use a recent qcow file? thank you for yout help.

Re: Cloudstack Upgrade Filed

[Luis]

Hi. What lines did you use for the upgrade?

Sent from Yahoo Mail on Android 
 
  On Thu, May 14, 2020 at 6:43 PM, hanumant 
borwandkar wrote:   HI,

Trying to upgrade cloudstack 4.11.3 to 4.13 latest but unable get success
also tried to upgrade to 4.14-RC3 test build both time got same error as
follows.

CentOS Linux release 7.6.1810 (Core)


ERROR
2


*020-05-15 00:12:42,059 ERROR [c.c.u.d.ScriptRunner] (main:null) (logid:)
com.mysql.jdbc.exceptions.jdbc4.MySQLSyntaxErrorException: Access denied;
you need (at least one of) the SUPER privilege(s) for this
operation2020-05-15 00:12:42,081 ERROR [c.c.u.DatabaseUpgradeChecker]
(main:null) (logid:) Unable to execute upgrade
scriptcom.mysql.jdbc.exceptions.jdbc4.MySQLSyntaxErrorException: Access
denied; you need (at least one of) the SUPER privilege(s) for this
operation*


logs
2020-05-15 00:12:41,329 DEBUG [c.c.u.d.VersionDaoImpl] (main:null) (logid:)
Checking to see if the database is at a version before it was the version
table is created
2020-05-15 00:12:41,368 INFO  [c.c.u.DatabaseUpgradeChecker] (main:null)
(logid:) DB version = 4.11.3.0 Code Version = 4.13.1.0
2020-05-15 00:12:41,368 INFO  [c.c.u.DatabaseUpgradeChecker] (main:null)
(logid:) Database upgrade must be performed from 4.11.3.0 to 4.13.1.0
2020-05-15 00:12:41,392 DEBUG [c.c.u.DatabaseUpgradeChecker] (main:null)
(logid:) Running upgrade Upgrade41120to41200 to upgrade from
4.11.2.0-4.12.0.0 to 4.12.0.0
2020-05-15 00:12:41,397 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
-- Licensed to the Apache Software Foundation (ASF) under one
2020-05-15 00:12:41,397 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
-- or more contributor license agreements.  See the NOTICE file
2020-05-15 00:12:41,397 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
-- distributed with this work for additional information
2020-05-15 00:12:41,397 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
-- regarding copyright ownership.  The ASF licenses this file
2020-05-15 00:12:41,397 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
-- to you under the Apache License, Version 2.0 (the
2020-05-15 00:12:41,397 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
-- "License"); you may not use this file except in compliance
2020-05-15 00:12:41,397 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
-- with the License.  You may obtain a copy of the License at
2020-05-15 00:12:41,397 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:) --
2020-05-15 00:12:41,397 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
--  http://www.apache.org/licenses/LICENSE-2.0
2020-05-15 00:12:41,397 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:) --
2020-05-15 00:12:41,397 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
-- Unless required by applicable law or agreed to in writing,
2020-05-15 00:12:41,397 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
-- software distributed under the License is distributed on an
2020-05-15 00:12:41,397 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
-- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
2020-05-15 00:12:41,397 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
-- KIND, either express or implied.  See the License for the
2020-05-15 00:12:41,398 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
-- specific language governing permissions and limitations
2020-05-15 00:12:41,398 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
-- under the License.
2020-05-15 00:12:41,398 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
--;
2020-05-15 00:12:41,398 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
-- Schema upgrade from 4.11.2.0 to 4.12.0.0
2020-05-15 00:12:41,398 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
--;
2020-05-15 00:12:41,398 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
-- [CLOUDSTACK-10314] Add reason column to ACL rule table
2020-05-15 00:12:41,403 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
ALTER TABLE `cloud`.`network_acl_item` ADD COLUMN `reason` VARCHAR(2500)
AFTER `display`
2020-05-15 00:12:41,442 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
-- [CLOUDSTACK-9846] Make provision to store content and subject for Alerts
in separate columns.
2020-05-15 00:12:41,442 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
ALTER TABLE `cloud`.`alert` ADD COLUMN `content` VARCHAR(5000)
2020-05-15 00:12:41,533 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
-- Fix the name of the column used to hold IPv4 range in 'vlan' table.
2020-05-15 00:12:41,534 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
ALTER TABLE `vlan` CHANGE `description` `ip4_range` varchar(255)
2020-05-15 00:12:41,569 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
-- [CLOUDSTACK-10344] bug when moving ACL rules (change order with drag and
drop)
2020-05-15 00:12:41,569 DEBUG [c.c.u.d.ScriptRunner] (main:null) (logid:)
-- We are only adding the permission to the default rules. Any custom rule
must be configured by the root admin.
2020-05-15 00:12:41,569 DEBUG [c.c.u.d.ScriptRunner] (main:null) 

Re: Problem accessing /client/ - Service Unavailable

[Luis]

Hi
I agree that the script should be granting the privileges but for some reason 
is not happening. I have been installing CS more than 20 the las week and I 
always have to do the granting privileges, just saying but maybe that past is 
disabled in the script. I may be wrong.

Sent from Yahoo Mail on Android 
 
  On Fri, May 8, 2020 at 10:34 AM, Nicolas Vazquez 
wrote:   Hi Jisha,

Just adding to Luis' comments, granting privileges shouldn't be necessary,
the script should handle that for you. Please consider the steps in the
documentation as well:
http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html#database-installation-and-configuration

Regards,
Nicolas Vazquez

El vie., 8 may. 2020 a las 10:45, Luis Martinez
() escribió:

> Sure,
>
>
> this line contains the user and password for the user cloud, I also
> changed the password for the user root
>
> cloudstack-setup-databases cloud:Password1@localhost
> --deploy-as=root:Password1
>
> here are the instructions to change the password for root
>
> 1.- after installing mysql runs this (sudo mysql_secure_installation)
> running this will ask you for root password, press (enter) because there
> is no password at the moment then it will ask you if you want to change
> the root password, press y (remember the password you are going to use)
> and for the following questions press y
>
> 2.- service mysql restart
> 3.- mysql -u root -p (this line will allow you to connect to mysql and
> it will ask you for root password )
>
> 4.- run the following lines
>
> GRANT ALL PRIVILEGES ON *.* TO 'cloud'@'%';
> GRANT ALL PRIVILEGES ON *.* TO 'root'@'%';
> FLUSH PRIVILEGES;
> quit
>
> 5.- service mysql restart
>
> 6.- ready to run this line
>
> cloudstack-setup-databases cloud:(any password you want to use, this
> will be encrypted and saved in db.properties)@localhost
> --deploy-as=root:*(here use the password for mysql root)*
>
> *7.- run the rest of you process
> *
>
> **On 5/8/2020 8:46 AM, Jisha Ashokan wrote:
>
> > Thank you, but the password is encrypted in
> /etc/cloudstack/management/db.properties . Can you please tell me how did
> you change the password?
> >
> > Thank you,
> >
> > On 2020/05/08 11:55:38, Luis  wrote:
> >> I had the same problem and it may be because the user doesn't have the
> correct privileges to the database. You have to login to the database and
> grant the user access to the database.
> >>
> >> Sent from Yahoo Mail on Android
> >>
> >>    On Fri, May 8, 2020 at 2:23 AM, Jisha Ashokan
> wrote:  Hello,
> >>
> >> After installing Cloudstack,
> >>
> >> IP:8080/client/
> >>
> >> gives HTTP ERROR 503
> >> Problem accessing /client/. Reason: Service Unavailable
> >>
> >> Tried restarting using
> >>
> >> service cloudstack-management restart
> >>
> >> Accessing the URL, and
> >>
> >> grep -i -E 'error|exception'
> /var/log/cloudstack/management/management-server.log gives
> >>
> >> --
> >> 2020-05-08 10:46:21,300 WARN  [o.a.c.s.m.c.ResourceApplicationContext]
> (main:null) (logid:) Exception encountered during context initialization -
> cancelling refresh attempt:
> org.springframework.context.ApplicationContextException: Failed to start
> bean 'cloudStackLifeCycle'; nested exception is
> com.cloud.utils.exception.CloudRuntimeException: Unable to acquire lock to
> check for database integrity.
> >> org.springframework.context.ApplicationContextException: Failed to
> start bean 'cloudStackLifeCycle'; nested exception is
> com.cloud.utils.exception.CloudRuntimeException: Unable to acquire lock to
> check for database integrity.
> >> Caused by: com.cloud.utils.exception.CloudRuntimeException: Unable to
> acquire lock to check for database integrity.
> >> 2020-05-08 11:28:04,678 ERROR [c.c.u.d.DbUtil] (main:null) (logid:)
> GET_LOCK() throws exception
> >> java.sql.SQLException: Operation not allowed for a result set of type
> ResultSet.TYPE_FORWARD_ONLY.
> >>      at
> com.mysql.cj.jdbc.exceptions.SQLError.createSQLException(SQLError.java:129)
> >>      at
> com.mysql.cj.jdbc.exceptions.SQLError.createSQLException(SQLError.java:97)
> >>      at
> com.mysql.cj.jdbc.exceptions.SQLExceptionsMapping.translateException(SQLExceptionsMapping.java:122)
> >> 2020-05-08 11:28:04,684 WARN  [o.a.c.s.m.c.ResourceApplicationContext]
> (main:null) (logid:) Exception encountered during context initialization -
> cancelling refresh attempt:
> org.springframework.context.ApplicationContextException: Failed to start
> bean 'cl

Re: Problem accessing /client/ - Service Unavailable

[Luis Martinez]

Sure,


this line contains the user and password for the user cloud, I also 
changed the password for the user root


cloudstack-setup-databases cloud:Password1@localhost 
--deploy-as=root:Password1


here are the instructions to change the password for root

1.- after installing mysql runs this (sudo mysql_secure_installation) 
running this will ask you for root password, press (enter) because there 
is no password at the moment then it will ask you if you want to change 
the root password, press y (remember the password you are going to use) 
and for the following questions press y


2.- service mysql restart
3.- mysql -u root -p (this line will allow you to connect to mysql and 
it will ask you for root password )


4.- run the following lines

GRANT ALL PRIVILEGES ON *.* TO 'cloud'@'%';
GRANT ALL PRIVILEGES ON *.* TO 'root'@'%';
FLUSH PRIVILEGES;
quit

5.- service mysql restart

6.- ready to run this line

cloudstack-setup-databases cloud:(any password you want to use, this 
will be encrypted and saved in db.properties)@localhost 
--deploy-as=root:*(here use the password for mysql root)*


*7.- run the rest of you process
*

**On 5/8/2020 8:46 AM, Jisha Ashokan wrote:


Thank you, but the password is encrypted in  
/etc/cloudstack/management/db.properties . Can you please tell me how did you 
change the password?

Thank you,

On 2020/05/08 11:55:38, Luis  wrote:

I had the same problem and it may be because the user doesn't have the correct 
privileges to the database. You have to login to the database and grant the 
user access to the database.

Sent from Yahoo Mail on Android
  
   On Fri, May 8, 2020 at 2:23 AM, Jisha Ashokan wrote:   Hello,


After installing Cloudstack,

IP:8080/client/

gives HTTP ERROR 503
Problem accessing /client/. Reason: Service Unavailable

Tried restarting using

service cloudstack-management restart

Accessing the URL, and

grep -i -E 'error|exception' 
/var/log/cloudstack/management/management-server.log gives

--
2020-05-08 10:46:21,300 WARN  [o.a.c.s.m.c.ResourceApplicationContext] 
(main:null) (logid:) Exception encountered during context initialization - 
cancelling refresh attempt: 
org.springframework.context.ApplicationContextException: Failed to start bean 
'cloudStackLifeCycle'; nested exception is 
com.cloud.utils.exception.CloudRuntimeException: Unable to acquire lock to 
check for database integrity.
org.springframework.context.ApplicationContextException: Failed to start bean 
'cloudStackLifeCycle'; nested exception is 
com.cloud.utils.exception.CloudRuntimeException: Unable to acquire lock to 
check for database integrity.
Caused by: com.cloud.utils.exception.CloudRuntimeException: Unable to acquire 
lock to check for database integrity.
2020-05-08 11:28:04,678 ERROR [c.c.u.d.DbUtil] (main:null) (logid:) GET_LOCK() 
throws exception
java.sql.SQLException: Operation not allowed for a result set of type 
ResultSet.TYPE_FORWARD_ONLY.
     at 
com.mysql.cj.jdbc.exceptions.SQLError.createSQLException(SQLError.java:129)
     at 
com.mysql.cj.jdbc.exceptions.SQLError.createSQLException(SQLError.java:97)
     at 
com.mysql.cj.jdbc.exceptions.SQLExceptionsMapping.translateException(SQLExceptionsMapping.java:122)
2020-05-08 11:28:04,684 WARN  [o.a.c.s.m.c.ResourceApplicationContext] 
(main:null) (logid:) Exception encountered during context initialization - 
cancelling refresh attempt: 
org.springframework.context.ApplicationContextException: Failed to start bean 
'cloudStackLifeCycle'; nested exception is 
com.cloud.utils.exception.CloudRuntimeException: Unable to acquire lock to 
check for database integrity.
org.springframework.context.ApplicationContextException: Failed to start bean 
'cloudStackLifeCycle'; nested exception is 
com.cloud.utils.exception.CloudRuntimeException: Unable to acquire lock to 
check for database integrity.
Caused by: com.cloud.utils.exception.CloudRuntimeException: Unable to acquire 
lock to check for database integrity.
--

Please help.

   

Re: Problem accessing /client/ - Service Unavailable

[Luis]

I had the same problem and it may be because the user doesn't have the correct 
privileges to the database. You have to login to the database and grant the 
user access to the database.

Sent from Yahoo Mail on Android 
 
  On Fri, May 8, 2020 at 2:23 AM, Jisha Ashokan wrote:   
Hello,

After installing Cloudstack, 

IP:8080/client/

gives HTTP ERROR 503
Problem accessing /client/. Reason: Service Unavailable

Tried restarting using 

service cloudstack-management restart

Accessing the URL, and 

grep -i -E 'error|exception' 
/var/log/cloudstack/management/management-server.log gives 

--
2020-05-08 10:46:21,300 WARN  [o.a.c.s.m.c.ResourceApplicationContext] 
(main:null) (logid:) Exception encountered during context initialization - 
cancelling refresh attempt: 
org.springframework.context.ApplicationContextException: Failed to start bean 
'cloudStackLifeCycle'; nested exception is 
com.cloud.utils.exception.CloudRuntimeException: Unable to acquire lock to 
check for database integrity.
org.springframework.context.ApplicationContextException: Failed to start bean 
'cloudStackLifeCycle'; nested exception is 
com.cloud.utils.exception.CloudRuntimeException: Unable to acquire lock to 
check for database integrity.
Caused by: com.cloud.utils.exception.CloudRuntimeException: Unable to acquire 
lock to check for database integrity.
2020-05-08 11:28:04,678 ERROR [c.c.u.d.DbUtil] (main:null) (logid:) GET_LOCK() 
throws exception 
java.sql.SQLException: Operation not allowed for a result set of type 
ResultSet.TYPE_FORWARD_ONLY.
    at 
com.mysql.cj.jdbc.exceptions.SQLError.createSQLException(SQLError.java:129)
    at 
com.mysql.cj.jdbc.exceptions.SQLError.createSQLException(SQLError.java:97)
    at 
com.mysql.cj.jdbc.exceptions.SQLExceptionsMapping.translateException(SQLExceptionsMapping.java:122)
2020-05-08 11:28:04,684 WARN  [o.a.c.s.m.c.ResourceApplicationContext] 
(main:null) (logid:) Exception encountered during context initialization - 
cancelling refresh attempt: 
org.springframework.context.ApplicationContextException: Failed to start bean 
'cloudStackLifeCycle'; nested exception is 
com.cloud.utils.exception.CloudRuntimeException: Unable to acquire lock to 
check for database integrity.
org.springframework.context.ApplicationContextException: Failed to start bean 
'cloudStackLifeCycle'; nested exception is 
com.cloud.utils.exception.CloudRuntimeException: Unable to acquire lock to 
check for database integrity.
Caused by: com.cloud.utils.exception.CloudRuntimeException: Unable to acquire 
lock to check for database integrity.
--

Please help. 

  

Re: Secondary Storage

[Luis Martinez]

ce all the missing videos (I'm sure you have all the
time of this world besides your work hours, your family obligations
(wife/kids), etc? I don't think so either... This is a community project
and one need to use brain to connect the dots - it's cloud a.k.a. complex
stuff, not an awerage web server setup. Cheers

On Wed, 6 May 2020 at 20:48, Mr Jazze  wrote:


Can I get some support with this storage issue? Which is really a matter

of

understanding exactly how the networking SHOULD be configured in a
multi-node deployment. If this is the only resource available whereby

Cloud

Stack development team offers assistance, it is sorely lacking.

Just to be clear, I'd like to see the potential of a successful Cloud

Stack

deployment (a single server installation appears to operate as expected).
However, its quiet a different picture when attempting to perform a full

on

production like deployment. As I've somewhat stated before, the
documentation is seriously lacking adequate rationale as to why a
setting/configuration is made.

Something else that has bewildered me is why there has not been and

effort

to produce youtube videos demonstrating/educating deployments?

On Tue, May 5, 2020 at 4:37 AM Karol Jędrzejczyk <

kjedrzejc...@icotera.com

wrote:


wt., 5 maj 2020 o 00:24 Mr Jazze  napisał(a):


Luis, thanks for your feedback. Though waiting seem to resolve your

issue,

I'm sure that is not the intended deployment outcome.


Waiting didn't resolve the issue for me, unfortunately.

I've made some observations around the problem.

- The system vms console/storage repeatedly rebuild and never come

online.

- The system vm template is downloaded to secondary storage (per
instructions) yet does not show size in console.
- The dashboard shows secondary 0/0 KB, primary 192.50 kb/787 GB. I

don't

understand why there is yet a separate storage meter.
- This VXLAN deployment for some unknown reason now shows the VNI

range

on

all three networks (Management, Public & Guest) instead of just the

Guest

network.


I have similar observations. At the moment I have one of the VMs in a
*running* state but there's no connectivity, the other one is in
*starting*. I see two qemu processes on the hypervisor but virsh list
returns an empty list. I'm planning to connect to the VNC servers next

to

see what's going on.
--
Karol Jędrzejczyk

--
CONFIDENTIALITY NOTICE


This message and any attachment is intended
exclusively for the individual or entity to which it is addressed. This
communication may contain information that is proprietary,

confidential,

legally privileged or otherwise exempt from disclosure. The security

and

integrity of e-mails cannot be guaranteed. Any reply to this e-mail and
any
attachment received may be subject to Icotera monitoring.
If you are not
the named addressee, you are not authorized to use, distribute, copy or
take any action in reliance on this message. The unauthorized use,
disclosure, or copying of this communication, or any attachment, is
strictly prohibited and may be unlawful. No waiver of confidentiality

or

any applicable privilege is intended by any mistransmission. If you

have

received this message in error, please notify the sender immediately by
replying to this e-mail and delete all copies of this message and any
attachments.








--

==

My Search to Build a Private Cloud!



--

Andrija Panić

Re: Secondary Storage

[Luis Martinez]

s
(wife/kids), etc? I don't think so either... This is a community project
and one need to use brain to connect the dots - it's cloud a.k.a. complex
stuff, not an awerage web server setup. Cheers

On Wed, 6 May 2020 at 20:48, Mr Jazze  wrote:


Can I get some support with this storage issue? Which is really a matter

of

understanding exactly how the networking SHOULD be configured in a
multi-node deployment. If this is the only resource available whereby

Cloud

Stack development team offers assistance, it is sorely lacking.

Just to be clear, I'd like to see the potential of a successful Cloud

Stack

deployment (a single server installation appears to operate as expected).
However, its quiet a different picture when attempting to perform a full

on

production like deployment. As I've somewhat stated before, the
documentation is seriously lacking adequate rationale as to why a
setting/configuration is made.

Something else that has bewildered me is why there has not been and

effort

to produce youtube videos demonstrating/educating deployments?

On Tue, May 5, 2020 at 4:37 AM Karol Jędrzejczyk <

kjedrzejc...@icotera.com

wrote:


wt., 5 maj 2020 o 00:24 Mr Jazze  napisał(a):


Luis, thanks for your feedback. Though waiting seem to resolve your

issue,

I'm sure that is not the intended deployment outcome.


Waiting didn't resolve the issue for me, unfortunately.

I've made some observations around the problem.

- The system vms console/storage repeatedly rebuild and never come

online.

- The system vm template is downloaded to secondary storage (per
instructions) yet does not show size in console.
- The dashboard shows secondary 0/0 KB, primary 192.50 kb/787 GB. I

don't

understand why there is yet a separate storage meter.
- This VXLAN deployment for some unknown reason now shows the VNI

range

on

all three networks (Management, Public & Guest) instead of just the

Guest

network.


I have similar observations. At the moment I have one of the VMs in a
*running* state but there's no connectivity, the other one is in
*starting*. I see two qemu processes on the hypervisor but virsh list
returns an empty list. I'm planning to connect to the VNC servers next

to

see what's going on.
--
Karol Jędrzejczyk

--
CONFIDENTIALITY NOTICE


This message and any attachment is intended
exclusively for the individual or entity to which it is addressed. This
communication may contain information that is proprietary,

confidential,

legally privileged or otherwise exempt from disclosure. The security

and

integrity of e-mails cannot be guaranteed. Any reply to this e-mail and
any
attachment received may be subject to Icotera monitoring.
If you are not
the named addressee, you are not authorized to use, distribute, copy or
take any action in reliance on this message. The unauthorized use,
disclosure, or copying of this communication, or any attachment, is
strictly prohibited and may be unlawful. No waiver of confidentiality

or

any applicable privilege is intended by any mistransmission. If you

have

received this message in error, please notify the sender immediately by
replying to this e-mail and delete all copies of this message and any
attachments.








--

==

My Search to Build a Private Cloud!



--

Andrija Panić

ISO file snot uploading

[Luis Martinez]

Hi Group.


I have this problems, now that the secondary storage is mounted witch I 
don't know how this happened after some errors but know that I am trying 
to upload some files I see this in the logs, any idea will be appreciated.



I will continue researching




2020-05-04 15:54:57,090 DEBUG [o.a.c.s.e.DefaultEndPointSelector] 
(Upload-Monitor-1:ctx-183af359) (logid:02ace399) Coudn't find ssvm for 
urlhttps://10.0.0.163/upload/66675b6a-8368-44fa-b512-8fd396c84c56
2020-05-04 15:54:57,096 DEBUG [c.c.h.o.r.Ovm3HypervisorGuru] 
(Upload-Monitor-1:ctx-183af359) (logid:02ace399) 
getCommandHostDelegation: class 
org.apache.cloudstack.storage.command.UploadStatusCommand
2020-05-04 15:54:57,096 DEBUG [c.c.h.XenServerGuru] 
(Upload-Monitor-1:ctx-183af359) (logid:02ace399) We are returning the 
default host to execute commands because the command is not of Copy type.
2020-05-04 15:54:57,098 DEBUG [c.c.a.t.Request] 
(Upload-Monitor-1:ctx-183af359) (logid:02ace399) Seq 
2-4133460032995983641: Sending  { Cmd , MgmtId: 147444187616084, via: 
2(s-2-VM), Ver: v1, Flags: 100011, 
[{"org.apache.cloudstack.storage.command.UploadStatusCommand":{"entityUuid":"66675b6a-8368-44fa-b512-8fd396c84c56","entityType":"Template","wait":0}}] 
}
2020-05-04 15:54:57,184 DEBUG [c.c.a.t.Request] 
(AgentManager-Handler-6:null) (logid:) Seq 2-4133460032995983641: 
Processing:  { Ans: , MgmtId: 147444187616084, via: 2, Ver: v1, Flags: 
10, 
[{"org.apache.cloudstack.storage.command.UploadStatusAnswer":{"status":"UNKNOWN","virtualSize":0,"physicalSize":0,"downloadPercent":0,"result":true,"wait":0}}] 
}
2020-05-04 15:54:57,184 DEBUG [c.c.a.t.Request] 
(Upload-Monitor-1:ctx-183af359) (logid:02ace399) Seq 
2-4133460032995983641: Received:  { Ans: , MgmtId: 147444187616084, via: 
2(s-2-VM), Ver: v1, Flags: 10, { UploadStatusAnswer } }

2020-05-04 15:54:58,185 DEBUG [c.c.s.Stat

Re: Secondary Storage

[Luis Martinez]

I had a similar problem, secondary storage not mounted by CS, I left the 
CS running for a couple of hours and not I see the secondary storage 
working, I am not sure if it has to download something before mounting it.


On 5/4/2020 3:27 PM, Mr Jazze wrote:

I've now tried 3 attempts to deploy CS with the following resources:

Management Server also hosting NFS shares (primary & secondary)
2 x KVM Hosts running Ubuntu 16.04
CloudStack 4.13.1
Native Linux Bridge
VXLAN Isolation

I cannot get the console to show/recognize the secondary NFS storage which
seems to be preventing the build/starting of systemvms (console proxy &
storage).

Can I get someone to detail exactly the steps to properly setup storage?

Please don't reference the CS online documentation as I've walked through
those instructions and find much to be lacking.

Help Installing CS 4.13

[Luis Martinez]

Hi

When installing CS4.13 I get an error that the Database can't be 
updated, reading in google I found that is because is trying to upgrade 
from 4.11 to 4.13, not sure why this is happening, is there a way to do 
a clean install without upgrade?



Thank you.

RE: Call for participation: Issue triaging and PR review/testing

[Luis]

Manual testing, not sure if automated test could do an entire test

Sent from Yahoo Mail on Android 
 
  On Thu, Dec 14, 2017 at 11:25 AM, Paul Angus<paul.an...@shapeblue.com> wrote: 
  Hi Luis,

Can you explain what you mean please?  Do you mean people writing automated 
tests or manual testing of discrete features?



Kind regards,

Paul Angus

paul.an...@shapeblue.com 
www.shapeblue.com
53 Chandos Place, Covent Garden, London  WC2N 4HSUK
@shapeblue
  
 


-Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: 14 December 2017 02:04
To: users@cloudstack.apache.org; Ivan Kudryavtsev <kudryavtsev...@bw-sw.com>; 
users@cloudstack.apache.org
Cc: dev <d...@cloudstack.apache.org>
Subject: Re: Call for participation: Issue triaging and PR review/testing

Hi
What about creating a team for testing and create a check list of what to test 
and how. Besides the people that uses CS. This may increase the quality.
Just an idea.

Sent from Yahoo Mail on Android 
 
  On Wed, Dec 13, 2017 at 10:21 AM, Ivan Kudryavtsev<kudryavtsev...@bw-sw.com> 
wrote:  Hi, Paul. Thank you for your response. I just still feel that it's a 
very
risky approach to deliver a new release if community haven't adopted and tried 
a previous one because future unidentified regressions are multiplied to 
currently unidentified regressions. But, I see it's a trade and controversity 
here.

2017-12-13 21:46 GMT+07:00 Paul Angus <paul.an...@shapeblue.com>:

> Thanks Rene.
>
> @Ivan, I understand your concerns. But if 4.10 is unusable, then it 
> will never get much production testing.
> The longer between releases, the harder testing and triage becomes.
>
> By putting a line in the sand for 4.11 and 4.12, and with the desire 
>to  keep making every release better than the last we can keep moving forward.
>  I think we're all largely in agreement that the process around 4.10 
>was  sub-optimal, which is why we've set out clear guidelines that we'd 
>like to  work to.
>
> You are correct that there is more to quality than just Marvin tests 
> (or at least the current ones), and long term, if community members 
> like yourselves and Rene, come up with tests/test structures that push 
> the boundaries of CloudStack, then automated testing will only get better.
>
> For now though, I would suggest that the best way to galvanise the 
> community around the manual testing of CloudStack is to have a release 
> candidate that everyone can coalesce around.
>
>
>
> Kind regards,
>
> Paul Angus
>
> paul.an...@shapeblue.com
> www.shapeblue.com
> 53 Chandos Place, Covent Garden, London  WC2N 4HSUK @shapeblue
>
>
>
>
> -Original Message-
> From: Rene Moser [mailto:m...@renemoser.net]
> Sent: 13 December 2017 12:56
> To: dev <d...@cloudstack.apache.org>; users@cloudstack.apache.org
> Subject: Re: Call for participation: Issue triaging and PR review/testing
>
> Hi all
>
> On 12/13/2017 05:04 AM, Ivan Kudryavtsev wrote:
> > Hello, devs, users, Rohit. Have a good day.
> >
> > Rohit, you intend to freeze 4.11 on 8 january and, frankly speaking, I
> > see risks here. A major risk is that 4.10 is too buggy and it seems
> > nobody uses it actually right now in production because it's unusable,
> > unfortunately, so we are planning to freeze 4.11 which stands on
> > untested 4.10 with a lot of lacks still undiscovered and not reported.
> > I believe it's a very dangerous way to release one more release with
> > bad quality. Actually, marvin and units don't cover regressions I meet
> > in 4.10. Ok, let's take a look at new one our engineers found today in
> 4.10:
>
> So, the point is, how do we (users, devs, all) improve quality?
>
> Marvin is great for smoke testing but CloudStack is dealing with many
> infra vendor components, which are not covered by the tests. How can we
> detect flows not covered by marvin?
>
> For me, I decided (independent of this discussion) to write integration
> tests in a way one would not expect, not following the "happy path":
>
> Try to break CloudStack, to make a better CloudStack.
>
> Put a chaos monkey in your test infra: Shut down storage, kill a host, put
> latency on storage, disable network on hosts, make load on a host.
> read only fs on a cluster wide primary fs. shut down a VR, remove a VR.
>
> Things that can happen!
>
> Not surprisingly I use Ansible. It has an extensive amount of modules
> which can be used to battle prove anything of your infra. Ansible playbooks
> are fairly easy to write, even when you are not used to write code.
>
> I will share my works when ready.
>
> René
>
>
>
>
>
>


-- 
With best regards, Ivan Kudryavtsev
Bitworks Software, Ltd.
Cell: +7-923-414-1515
WWW: http://bitworks.software/ <http://bw-sw.com/>  
  

Re: Call for participation: Issue triaging and PR review/testing

[Luis]

Hi
What about creating a team for testing and create a check list of what to test 
and how. Besides the people that uses CS. This may increase the quality.
Just an idea.

Sent from Yahoo Mail on Android 
 
  On Wed, Dec 13, 2017 at 10:21 AM, Ivan Kudryavtsev 
wrote:   Hi, Paul. Thank you for your response. I just still feel that it's a 
very
risky approach to deliver a new release if community haven't adopted and
tried a previous one because future unidentified regressions are multiplied
to currently unidentified regressions. But, I see it's a trade and
controversity here.

2017-12-13 21:46 GMT+07:00 Paul Angus :

> Thanks Rene.
>
> @Ivan, I understand your concerns. But if 4.10 is unusable, then it will
> never get much production testing.
> The longer between releases, the harder testing and triage becomes.
>
> By putting a line in the sand for 4.11 and 4.12, and with the desire to
> keep making every release better than the last we can keep moving forward.
>  I think we're all largely in agreement that the process around 4.10 was
> sub-optimal, which is why we've set out clear guidelines that we'd like to
> work to.
>
> You are correct that there is more to quality than just Marvin tests (or
> at least the current ones), and long term, if community members like
> yourselves and Rene, come up with tests/test structures that push the
> boundaries of CloudStack, then automated testing will only get better.
>
> For now though, I would suggest that the best way to galvanise the
> community around the manual testing of CloudStack is to have a release
> candidate that everyone can coalesce around.
>
>
>
> Kind regards,
>
> Paul Angus
>
> paul.an...@shapeblue.com
> www.shapeblue.com
> 53 Chandos Place, Covent Garden, London  WC2N 4HSUK
> @shapeblue
>
>
>
>
> -Original Message-
> From: Rene Moser [mailto:m...@renemoser.net]
> Sent: 13 December 2017 12:56
> To: dev ; users@cloudstack.apache.org
> Subject: Re: Call for participation: Issue triaging and PR review/testing
>
> Hi all
>
> On 12/13/2017 05:04 AM, Ivan Kudryavtsev wrote:
> > Hello, devs, users, Rohit. Have a good day.
> >
> > Rohit, you intend to freeze 4.11 on 8 january and, frankly speaking, I
> > see risks here. A major risk is that 4.10 is too buggy and it seems
> > nobody uses it actually right now in production because it's unusable,
> > unfortunately, so we are planning to freeze 4.11 which stands on
> > untested 4.10 with a lot of lacks still undiscovered and not reported.
> > I believe it's a very dangerous way to release one more release with
> > bad quality. Actually, marvin and units don't cover regressions I meet
> > in 4.10. Ok, let's take a look at new one our engineers found today in
> 4.10:
>
> So, the point is, how do we (users, devs, all) improve quality?
>
> Marvin is great for smoke testing but CloudStack is dealing with many
> infra vendor components, which are not covered by the tests. How can we
> detect flows not covered by marvin?
>
> For me, I decided (independent of this discussion) to write integration
> tests in a way one would not expect, not following the "happy path":
>
> Try to break CloudStack, to make a better CloudStack.
>
> Put a chaos monkey in your test infra: Shut down storage, kill a host, put
> latency on storage, disable network on hosts, make load on a host.
> read only fs on a cluster wide primary fs. shut down a VR, remove a VR.
>
> Things that can happen!
>
> Not surprisingly I use Ansible. It has an extensive amount of modules
> which can be used to battle prove anything of your infra. Ansible playbooks
> are fairly easy to write, even when you are not used to write code.
>
> I will share my works when ready.
>
> René
>
>
>
>
>
>


-- 
With best regards, Ivan Kudryavtsev
Bitworks Software, Ltd.
Cell: +7-923-414-1515
WWW: http://bitworks.software/   

Re: XenServer 7.1/7.2

[Luis]

Acordi g to the manual, only 7.0 is supported on 4.10, i had to downgrade to 
XenServer 7.

Sent from Yahoo Mail on Android 
 
  On Tue, Nov 14, 2017 at 11:18 AM, Marty Godsey wrote:   
Anyone tried XenServer 7.1/7.2 with ACS 4.10?

Regards,
Marty Godsey
Principal Engineer
nSource Solutions, LLC
  

Help co figuring VLANs

[Luis]

Hi All

I have not much experience co figuring VLANs in a Cisco 3560, i co figured CS 
4.10 but SVVM is unable to pi g gateway or internet. This is how i configured 
the switch.
Conf tVlan 65,300-800End
Conf tInterface range Gi0/16Switchport trunk encpsulation dot1qSwitchport mode 
trunkSwitchport trunk allowed vlan 65,300-800End

I see the vla. In the host but i am unable to ping.

Any help will be apreciated.
Thank you.

Sent from Yahoo Mail on Android

Creating a CloudStack advance networking

[Luis]

I am i stalling a demo environment to test CS Advance networking but i am ha 
ing some problems, i hace CS installed and configured with Advance Networking 
but is not able to download iso. I am using CS 4.10 with XenServer with loca 
IPs because is for internal use and to learn. 
Could some o e give me advice or guide me to finish this project?

Firewall pfsense with 3 i 
terfacesPublic:192.168.0.0/24Servers:10.0.0.0/23Lan:192.168.1.0/23
Host: 10.0.0.0/23Publuc-local IPs: 192.168.0.0/24


Thank you.

Re: Upgrade 4.9.2 to 4.10

[Luis]

Hi
I did with XenServer 7 but i am fixin some problems with my switch.

Sent from Yahoo Mail on Android 
 
  On Thu, Sep 14, 2017 at 6:29 AM, Ciobanu Cristian 
wrote:   Hello,

 

    Did someone upgraded 4.9.2 ( shapeblue repo ) to 4.10, right now I have
the following setup :

 

    ACS 4.9.2 with VMware 5.5 configured with Advanced networking.

 

    Any bad experiences?

 

Best regards.

Cristian

 

  

 

  

  
 
 
  On Thu, Sep 14, 2017 at 6:29 AM, Ciobanu Cristian 
wrote:   Hello,

 

    Did someone upgraded 4.9.2 ( shapeblue repo ) to 4.10, right now I have
the following setup :

 

    ACS 4.9.2 with VMware 5.5 configured with Advanced networking.

 

    Any bad experiences?

 

Best regards.

Cristian

 

  

 

  

  

CS Switch Configuration

[Luis]

Hi all
After several days trying different configuration on my Switch I still have the 
same problem, the S-VM is unable to ping to internet, I have verified my 
configuration and the names of my interfaces, the names march in my CS and 
interfaces name (management-storage and public-guest), can somebody share 
experiences or how a Cisco 3560 was configured? the S-VM is able to ping the 
gateway but not internet
This is the configuration I am using.
conf tinterface range Gi0/11-12switchport trunk encapsulation dot1q switchport 
mode trunkswitchport trunk allowed vlan 65,300-800#switchport mode 
accesschannel-group 4 mode activechannel-protocol lacpend 
Thank you for your help.

Re: Configuring CS with Advance Networking for an internal laboratory

[Luis]

I was running some test and I am able to ping to the host from SVM and VVM but 
I am not able to ping from the host to these VM's, This looks like a bad VLAN 
configuration maybe?

XenServer: 10.0.0.30S-VM:10.0.0.202V-VM:10.0.0.203
Any idea on this?

Thank you all for your help.

  From: Imran Ahmed <im...@eaxiom.net>
 To: users@cloudstack.apache.org; 'Luis' <lmartinez...@yahoo.com> 
 Sent: Saturday, September 9, 2017 3:40 PM
 Subject: RE: Configuring CS with Advance Networking for an internal laboratory
   
Please check out the traffic label settings  as  per the documentation.
Please refer this link : 
http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/4.9/hypervisor/xenserver.html


Regards,

Imran

-Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: Sunday, September 10, 2017 12:21 AM
To: Imran Ahmed; users@cloudstack.apache.org
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

No, I use XenServer for the Host and Ubuntu for the Manager

      From: Imran Ahmed <im...@eaxiom.net>
 To: users@cloudstack.apache.org; lmartinez...@yahoo.com 
 Sent: Saturday, September 9, 2017 3:19 PM
 Subject: RE: Configuring CS with Advance Networking for an internal laboratory
  
Do you use KVM hypervisor ?

-Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: Saturday, September 09, 2017 11:43 PM
To: im...@eaxiom.net; users@cloudstack.apache.org
Subject: RE: Configuring CS with Advance Networking for an internal laboratory

Hi
I am using Ubuntu 14.04, do i need the bridge co figuratio? I didnt see that 
part for Ubuntu in the instruction.

Thank you

Sent from Yahoo Mail on Android 
 
  On Sat, Sep 9, 2017 at 2:15 PM, Imran Ahmed<im...@eaxiom.net> wrote:  Hi Luis,
Please see if the bridge configuration is correct as per your hypervisor. 

-Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: Saturday, September 09, 2017 7:56 PM
To: users@cloudstack.apache.org
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Hi
After removing Switchport mode access i am able to ping to the gateway but not 
to internet, I have my resolv to 8.8.8.8 but unable to ping to internet, any 
help or advice will be appreciated.

thank you.

      From: Imran Ahmed <im...@eaxiom.net>
 To: users@cloudstack.apache.org 
 Sent: Saturday, September 9, 2017 12:59 AM
 Subject: RE: Configuring CS with Advance Networking for an internal laboratory
  
I don’t think you need this line at least:

Switchport mode access

I assume that you use the LACP bond that bonds interfaces:  Gi0/11 and Gi0/12  
to carry both public traffic as well as guest traffic.

The next factor is the  traffic labels you set in your  Cloudstack advanced 
zone setup .

Another factor is the  configuration of  cloudbro and Cloudbr1  bridges  in 
your interface configurations.


By the way  are you using  CentOS or Ubuntu or Suse or ..?


Regards,


Imran 

-----Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: Saturday, September 09, 2017 9:07 AM
To: users@cloudstack.apache.org
Cc: Paul Angus
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Hi

I am testing my CS with Advance Networking but it's not able to download iso or 
the templates, I think this is because of my VLAN configuration, s-vm or v-vm 
can't ping to internet, I did set up this parameter 
(secstorage.allowed.internal.sites) to my manager and host ip.
This is my VLAN configuration, please any advice on this issue
conf tinterface range Gi0/11-12switchport trunk encapsulation dot1q switchport 
mode trunkswitchport trunk allowed vlan 65,300-800switchport mode 
accesschannel-group 4 mode activechannel-protocol lacpend 

Thank you


      From: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>
 To: Luis <lmartinez...@yahoo.com>; "users@cloudstack.apache.org" 
<users@cloudstack.apache.org> 
Cc: Paul Angus <paul.an...@shapeblue.com>
 Sent: Friday, September 8, 2017 10:48 AM
 Subject: Re: Configuring CS with Advance Networking for an internal laboratory
  
Hi Luis,

>.Do I need to specify what port the vlan are going to use?
Yes, selection of interfaces/ports need to be done. Please add command 
“interface range Gi0/9 – 10” after command “conf t”
Also add “no switchport mode access” just before the command “end”

Hope that helps.

Regards,
Sateesh Chodapuneedi,
CloudStack Development,
Engineering, http://accelerite.com<http://accelerite.com/>
Santa Clara, 95054, CA
@accelerite

From: Luis <lmartinez...@yahoo.com>
Reply-To: Luis <lmartinez...@yahoo.com>
Date: Friday, 8 September 2017 at 8:00 PM
To: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>, 
"users@cloudstack.apache.org" <users@cloudstack.apache.org>
Cc: Paul Angus <paul.an...@shapeblue.com>
Subject: Re: Conf

Re: Configuring CS with Advance Networking for an internal laboratory

[Luis]

Hi Imran
I already have the label configuration




  From: Imran Ahmed <im...@eaxiom.net>
 To: users@cloudstack.apache.org; 'Luis' <lmartinez...@yahoo.com> 
 Sent: Saturday, September 9, 2017 3:40 PM
 Subject: RE: Configuring CS with Advance Networking for an internal laboratory
   
Please check out the traffic label settings  as  per the documentation.
Please refer this link : 
http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/4.9/hypervisor/xenserver.html


Regards,

Imran

-Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: Sunday, September 10, 2017 12:21 AM
To: Imran Ahmed; users@cloudstack.apache.org
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

No, I use XenServer for the Host and Ubuntu for the Manager

      From: Imran Ahmed <im...@eaxiom.net>
 To: users@cloudstack.apache.org; lmartinez...@yahoo.com 
 Sent: Saturday, September 9, 2017 3:19 PM
 Subject: RE: Configuring CS with Advance Networking for an internal laboratory
  
Do you use KVM hypervisor ?

-Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: Saturday, September 09, 2017 11:43 PM
To: im...@eaxiom.net; users@cloudstack.apache.org
Subject: RE: Configuring CS with Advance Networking for an internal laboratory

Hi
I am using Ubuntu 14.04, do i need the bridge co figuratio? I didnt see that 
part for Ubuntu in the instruction.

Thank you

Sent from Yahoo Mail on Android 
 
  On Sat, Sep 9, 2017 at 2:15 PM, Imran Ahmed<im...@eaxiom.net> wrote:  Hi Luis,
Please see if the bridge configuration is correct as per your hypervisor. 

-Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: Saturday, September 09, 2017 7:56 PM
To: users@cloudstack.apache.org
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Hi
After removing Switchport mode access i am able to ping to the gateway but not 
to internet, I have my resolv to 8.8.8.8 but unable to ping to internet, any 
help or advice will be appreciated.

thank you.

      From: Imran Ahmed <im...@eaxiom.net>
 To: users@cloudstack.apache.org 
 Sent: Saturday, September 9, 2017 12:59 AM
 Subject: RE: Configuring CS with Advance Networking for an internal laboratory
  
I don’t think you need this line at least:

Switchport mode access

I assume that you use the LACP bond that bonds interfaces:  Gi0/11 and Gi0/12  
to carry both public traffic as well as guest traffic.

The next factor is the  traffic labels you set in your  Cloudstack advanced 
zone setup .

Another factor is the  configuration of  cloudbro and Cloudbr1  bridges  in 
your interface configurations.


By the way  are you using  CentOS or Ubuntu or Suse or ..?


Regards,


Imran 

-----Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: Saturday, September 09, 2017 9:07 AM
To: users@cloudstack.apache.org
Cc: Paul Angus
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Hi

I am testing my CS with Advance Networking but it's not able to download iso or 
the templates, I think this is because of my VLAN configuration, s-vm or v-vm 
can't ping to internet, I did set up this parameter 
(secstorage.allowed.internal.sites) to my manager and host ip.
This is my VLAN configuration, please any advice on this issue
conf tinterface range Gi0/11-12switchport trunk encapsulation dot1q switchport 
mode trunkswitchport trunk allowed vlan 65,300-800switchport mode 
accesschannel-group 4 mode activechannel-protocol lacpend 

Thank you


      From: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>
 To: Luis <lmartinez...@yahoo.com>; "users@cloudstack.apache.org" 
<users@cloudstack.apache.org> 
Cc: Paul Angus <paul.an...@shapeblue.com>
 Sent: Friday, September 8, 2017 10:48 AM
 Subject: Re: Configuring CS with Advance Networking for an internal laboratory
  
Hi Luis,

>.Do I need to specify what port the vlan are going to use?
Yes, selection of interfaces/ports need to be done. Please add command 
“interface range Gi0/9 – 10” after command “conf t”
Also add “no switchport mode access” just before the command “end”

Hope that helps.

Regards,
Sateesh Chodapuneedi,
CloudStack Development,
Engineering, http://accelerite.com<http://accelerite.com/>
Santa Clara, 95054, CA
@accelerite

From: Luis <lmartinez...@yahoo.com>
Reply-To: Luis <lmartinez...@yahoo.com>
Date: Friday, 8 September 2017 at 8:00 PM
To: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>, 
"users@cloudstack.apache.org" <users@cloudstack.apache.org>
Cc: Paul Angus <paul.an...@shapeblue.com>
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Thank you for your help

Do I need to specify what port the vlan are going to use?

1.- create vlnas
conf t
vlan 65,300-800
end

2

Re: Configuring CS with Advance Networking for an internal laboratory

[Luis]

This is what I have to configure VLAN's, am I missing something? I notice that 
The Svm can't ping to the v-vm
XenServerconf tinterface range Gi0/11-12switchport trunk encapsulation dot1q 
switchport mode trunkswitchport trunk allowed vlan 65,300-800channel-group 4 
mode active
channel-protocol lacpend 


  From: Imran Ahmed <im...@eaxiom.net>
 To: users@cloudstack.apache.org; lmartinez...@yahoo.com 
 Sent: Saturday, September 9, 2017 3:19 PM
 Subject: RE: Configuring CS with Advance Networking for an internal laboratory
   
Do you use KVM hypervisor ?

-Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: Saturday, September 09, 2017 11:43 PM
To: im...@eaxiom.net; users@cloudstack.apache.org
Subject: RE: Configuring CS with Advance Networking for an internal laboratory

Hi
I am using Ubuntu 14.04, do i need the bridge co figuratio? I didnt see that 
part for Ubuntu in the instruction.

Thank you

Sent from Yahoo Mail on Android 
 
  On Sat, Sep 9, 2017 at 2:15 PM, Imran Ahmed<im...@eaxiom.net> wrote:  Hi Luis,
Please see if the bridge configuration is correct as per your hypervisor. 

-Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: Saturday, September 09, 2017 7:56 PM
To: users@cloudstack.apache.org
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Hi
After removing Switchport mode access i am able to ping to the gateway but not 
to internet, I have my resolv to 8.8.8.8 but unable to ping to internet, any 
help or advice will be appreciated.

thank you.

      From: Imran Ahmed <im...@eaxiom.net>
 To: users@cloudstack.apache.org 
 Sent: Saturday, September 9, 2017 12:59 AM
 Subject: RE: Configuring CS with Advance Networking for an internal laboratory
  
I don’t think you need this line at least:

Switchport mode access

I assume that you use the LACP bond that bonds interfaces:  Gi0/11 and Gi0/12  
to carry both public traffic as well as guest traffic.

The next factor is the  traffic labels you set in your  Cloudstack advanced 
zone setup .

Another factor is the  configuration of  cloudbro and Cloudbr1  bridges  in 
your interface configurations.


By the way  are you using  CentOS or Ubuntu or Suse or ..?


Regards,


Imran 

-Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: Saturday, September 09, 2017 9:07 AM
To: users@cloudstack.apache.org
Cc: Paul Angus
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Hi

I am testing my CS with Advance Networking but it's not able to download iso or 
the templates, I think this is because of my VLAN configuration, s-vm or v-vm 
can't ping to internet, I did set up this parameter 
(secstorage.allowed.internal.sites) to my manager and host ip.
This is my VLAN configuration, please any advice on this issue
conf tinterface range Gi0/11-12switchport trunk encapsulation dot1q switchport 
mode trunkswitchport trunk allowed vlan 65,300-800switchport mode 
accesschannel-group 4 mode activechannel-protocol lacpend 

Thank you


      From: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>
 To: Luis <lmartinez...@yahoo.com>; "users@cloudstack.apache.org" 
<users@cloudstack.apache.org> 
Cc: Paul Angus <paul.an...@shapeblue.com>
 Sent: Friday, September 8, 2017 10:48 AM
 Subject: Re: Configuring CS with Advance Networking for an internal laboratory
  
Hi Luis,

>.Do I need to specify what port the vlan are going to use?
Yes, selection of interfaces/ports need to be done. Please add command 
“interface range Gi0/9 – 10” after command “conf t”
Also add “no switchport mode access” just before the command “end”

Hope that helps.

Regards,
Sateesh Chodapuneedi,
CloudStack Development,
Engineering, http://accelerite.com<http://accelerite.com/>
Santa Clara, 95054, CA
@accelerite

From: Luis <lmartinez...@yahoo.com>
Reply-To: Luis <lmartinez...@yahoo.com>
Date: Friday, 8 September 2017 at 8:00 PM
To: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>, 
"users@cloudstack.apache.org" <users@cloudstack.apache.org>
Cc: Paul Angus <paul.an...@shapeblue.com>
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Thank you for your help

Do I need to specify what port the vlan are going to use?

1.- create vlnas
conf t
vlan 65,300-800
end

2.-
conf t
switchport mode trunk
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 65,300-800
end



From: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>
To: "users@cloudstack.apache.org" <users@cloudstack.apache.org>; Luis 
<lmartinez...@yahoo.com>
Cc: Paul Angus <paul.an...@shapeblue.com>
Sent: Friday, September 8, 2017 9:42 AM
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Hi Luis,
I have configured Cisco 3750G switch f

Re: Configuring CS with Advance Networking for an internal laboratory

[Luis]

No, I use XenServer for the Host and Ubuntu for the Manager

  From: Imran Ahmed <im...@eaxiom.net>
 To: users@cloudstack.apache.org; lmartinez...@yahoo.com 
 Sent: Saturday, September 9, 2017 3:19 PM
 Subject: RE: Configuring CS with Advance Networking for an internal laboratory
   
Do you use KVM hypervisor ?

-Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: Saturday, September 09, 2017 11:43 PM
To: im...@eaxiom.net; users@cloudstack.apache.org
Subject: RE: Configuring CS with Advance Networking for an internal laboratory

Hi
I am using Ubuntu 14.04, do i need the bridge co figuratio? I didnt see that 
part for Ubuntu in the instruction.

Thank you

Sent from Yahoo Mail on Android 
 
  On Sat, Sep 9, 2017 at 2:15 PM, Imran Ahmed<im...@eaxiom.net> wrote:  Hi Luis,
Please see if the bridge configuration is correct as per your hypervisor. 

-Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: Saturday, September 09, 2017 7:56 PM
To: users@cloudstack.apache.org
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Hi
After removing Switchport mode access i am able to ping to the gateway but not 
to internet, I have my resolv to 8.8.8.8 but unable to ping to internet, any 
help or advice will be appreciated.

thank you.

      From: Imran Ahmed <im...@eaxiom.net>
 To: users@cloudstack.apache.org 
 Sent: Saturday, September 9, 2017 12:59 AM
 Subject: RE: Configuring CS with Advance Networking for an internal laboratory
  
I don’t think you need this line at least:

Switchport mode access

I assume that you use the LACP bond that bonds interfaces:  Gi0/11 and Gi0/12  
to carry both public traffic as well as guest traffic.

The next factor is the  traffic labels you set in your  Cloudstack advanced 
zone setup .

Another factor is the  configuration of  cloudbro and Cloudbr1  bridges  in 
your interface configurations.


By the way  are you using  CentOS or Ubuntu or Suse or ..?


Regards,


Imran 

-Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: Saturday, September 09, 2017 9:07 AM
To: users@cloudstack.apache.org
Cc: Paul Angus
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Hi

I am testing my CS with Advance Networking but it's not able to download iso or 
the templates, I think this is because of my VLAN configuration, s-vm or v-vm 
can't ping to internet, I did set up this parameter 
(secstorage.allowed.internal.sites) to my manager and host ip.
This is my VLAN configuration, please any advice on this issue
conf tinterface range Gi0/11-12switchport trunk encapsulation dot1q switchport 
mode trunkswitchport trunk allowed vlan 65,300-800switchport mode 
accesschannel-group 4 mode activechannel-protocol lacpend 

Thank you


      From: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>
 To: Luis <lmartinez...@yahoo.com>; "users@cloudstack.apache.org" 
<users@cloudstack.apache.org> 
Cc: Paul Angus <paul.an...@shapeblue.com>
 Sent: Friday, September 8, 2017 10:48 AM
 Subject: Re: Configuring CS with Advance Networking for an internal laboratory
  
Hi Luis,

>.Do I need to specify what port the vlan are going to use?
Yes, selection of interfaces/ports need to be done. Please add command 
“interface range Gi0/9 – 10” after command “conf t”
Also add “no switchport mode access” just before the command “end”

Hope that helps.

Regards,
Sateesh Chodapuneedi,
CloudStack Development,
Engineering, http://accelerite.com<http://accelerite.com/>
Santa Clara, 95054, CA
@accelerite

From: Luis <lmartinez...@yahoo.com>
Reply-To: Luis <lmartinez...@yahoo.com>
Date: Friday, 8 September 2017 at 8:00 PM
To: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>, 
"users@cloudstack.apache.org" <users@cloudstack.apache.org>
Cc: Paul Angus <paul.an...@shapeblue.com>
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Thank you for your help

Do I need to specify what port the vlan are going to use?

1.- create vlnas
conf t
vlan 65,300-800
end

2.-
conf t
switchport mode trunk
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 65,300-800
end



From: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>
To: "users@cloudstack.apache.org" <users@cloudstack.apache.org>; Luis 
<lmartinez...@yahoo.com>
Cc: Paul Angus <paul.an...@shapeblue.com>
Sent: Friday, September 8, 2017 9:42 AM
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Hi Luis,
I have configured Cisco 3750G switch for my CloudStack advanced mode setup. 
Configuration should be the similar for Cisco 3560 as well, probably might help 
you.

>> 4 Nics: 2 for Management-Storage (LACP) and 2 for Public-Guest
Make sure to setup the VLANs before configuring t

RE: Configuring CS with Advance Networking for an internal laboratory

[Luis]

Hi
I am using Ubuntu 14.04, do i need the bridge co figuratio? I didnt see that 
part for Ubuntu in the instruction.

Thank you

Sent from Yahoo Mail on Android 
 
  On Sat, Sep 9, 2017 at 2:15 PM, Imran Ahmed<im...@eaxiom.net> wrote:   Hi 
Luis,
Please see if the bridge configuration is correct as per your hypervisor. 

-Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: Saturday, September 09, 2017 7:56 PM
To: users@cloudstack.apache.org
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Hi
After removing Switchport mode access i am able to ping to the gateway but not 
to internet, I have my resolv to 8.8.8.8 but unable to ping to internet, any 
help or advice will be appreciated.

thank you.

      From: Imran Ahmed <im...@eaxiom.net>
 To: users@cloudstack.apache.org 
 Sent: Saturday, September 9, 2017 12:59 AM
 Subject: RE: Configuring CS with Advance Networking for an internal laboratory
  
I don’t think you need this line at least:

Switchport mode access

I assume that you use the LACP bond that bonds interfaces:  Gi0/11 and Gi0/12  
to carry both public traffic as well as guest traffic.

The next factor is the  traffic labels you set in your  Cloudstack advanced 
zone setup .

Another factor is the  configuration of  cloudbro and Cloudbr1  bridges  in 
your interface configurations.


By the way  are you using  CentOS or Ubuntu or Suse or ..?


Regards,


Imran 

-Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: Saturday, September 09, 2017 9:07 AM
To: users@cloudstack.apache.org
Cc: Paul Angus
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Hi

I am testing my CS with Advance Networking but it's not able to download iso or 
the templates, I think this is because of my VLAN configuration, s-vm or v-vm 
can't ping to internet, I did set up this parameter 
(secstorage.allowed.internal.sites) to my manager and host ip.
This is my VLAN configuration, please any advice on this issue
conf tinterface range Gi0/11-12switchport trunk encapsulation dot1q switchport 
mode trunkswitchport trunk allowed vlan 65,300-800switchport mode 
accesschannel-group 4 mode activechannel-protocol lacpend 

Thank you


      From: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>
 To: Luis <lmartinez...@yahoo.com>; "users@cloudstack.apache.org" 
<users@cloudstack.apache.org> 
Cc: Paul Angus <paul.an...@shapeblue.com>
 Sent: Friday, September 8, 2017 10:48 AM
 Subject: Re: Configuring CS with Advance Networking for an internal laboratory
  
Hi Luis,

>.Do I need to specify what port the vlan are going to use?
Yes, selection of interfaces/ports need to be done. Please add command 
“interface range Gi0/9 – 10” after command “conf t”
Also add “no switchport mode access” just before the command “end”

Hope that helps.

Regards,
Sateesh Chodapuneedi,
CloudStack Development,
Engineering, http://accelerite.com<http://accelerite.com/>
Santa Clara, 95054, CA
@accelerite

From: Luis <lmartinez...@yahoo.com>
Reply-To: Luis <lmartinez...@yahoo.com>
Date: Friday, 8 September 2017 at 8:00 PM
To: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>, 
"users@cloudstack.apache.org" <users@cloudstack.apache.org>
Cc: Paul Angus <paul.an...@shapeblue.com>
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Thank you for your help

Do I need to specify what port the vlan are going to use?

1.- create vlnas
conf t
vlan 65,300-800
end

2.-
conf t
switchport mode trunk
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 65,300-800
end



From: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>
To: "users@cloudstack.apache.org" <users@cloudstack.apache.org>; Luis 
<lmartinez...@yahoo.com>
Cc: Paul Angus <paul.an...@shapeblue.com>
Sent: Friday, September 8, 2017 9:42 AM
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Hi Luis,
I have configured Cisco 3750G switch for my CloudStack advanced mode setup. 
Configuration should be the similar for Cisco 3560 as well, probably might help 
you.

>> 4 Nics: 2 for Management-Storage (LACP) and 2 for Public-Guest
Make sure to setup the VLANs before configuring the switch ports for interfaces 
meant for Public and Guest traffic
conf t
vlan ,
end
Please note that the VLAN range meant for public traffic are routable (with 
subnet assigned)
Configure the switch ports for Public and Guest traffic
switchport mode trunk
switchport trunk encapsulation dot1q
switchport trunk allowed vlan ,
Ex: If 100 is VLAN ID of routable VLAN meant for public traffic, and VLAN IDs 
500 to 600 are guest (zone) VLANs, then above command looks like,
switchport trunk allowed vlan 100,500-600

Regards,
Sateesh Chodapuneedi,
CloudStack Developmen

Re: Configuring CS with Advance Networking for an internal laboratory

[Luis]

Hi
After removing Switchport mode access i am able to ping to the gateway but not 
to internet, I have my resolv to 8.8.8.8 but unable to ping to internet, any 
help or advice will be appreciated.

thank you.

  From: Imran Ahmed <im...@eaxiom.net>
 To: users@cloudstack.apache.org 
 Sent: Saturday, September 9, 2017 12:59 AM
 Subject: RE: Configuring CS with Advance Networking for an internal laboratory
   
I don’t think you need this line at least:

Switchport mode access

I assume that you use the LACP bond that bonds interfaces:  Gi0/11 and Gi0/12  
to carry both public traffic as well as guest traffic.

The next factor is the  traffic labels you set in your  Cloudstack advanced 
zone setup .

Another factor is the  configuration of  cloudbro and Cloudbr1  bridges  in 
your interface configurations.


By the way  are you using  CentOS or Ubuntu or Suse or ..?


Regards,


Imran 

-Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: Saturday, September 09, 2017 9:07 AM
To: users@cloudstack.apache.org
Cc: Paul Angus
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Hi

I am testing my CS with Advance Networking but it's not able to download iso or 
the templates, I think this is because of my VLAN configuration, s-vm or v-vm 
can't ping to internet, I did set up this parameter 
(secstorage.allowed.internal.sites) to my manager and host ip.
This is my VLAN configuration, please any advice on this issue
conf tinterface range Gi0/11-12switchport trunk encapsulation dot1q switchport 
mode trunkswitchport trunk allowed vlan 65,300-800switchport mode 
accesschannel-group 4 mode activechannel-protocol lacpend 

Thank you


      From: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>
 To: Luis <lmartinez...@yahoo.com>; "users@cloudstack.apache.org" 
<users@cloudstack.apache.org> 
Cc: Paul Angus <paul.an...@shapeblue.com>
 Sent: Friday, September 8, 2017 10:48 AM
 Subject: Re: Configuring CS with Advance Networking for an internal laboratory
  
Hi Luis,

>.Do I need to specify what port the vlan are going to use?
Yes, selection of interfaces/ports need to be done. Please add command 
“interface range Gi0/9 – 10” after command “conf t”
Also add “no switchport mode access” just before the command “end”

Hope that helps.

Regards,
Sateesh Chodapuneedi,
CloudStack Development,
Engineering, http://accelerite.com<http://accelerite.com/>
Santa Clara, 95054, CA
@accelerite

From: Luis <lmartinez...@yahoo.com>
Reply-To: Luis <lmartinez...@yahoo.com>
Date: Friday, 8 September 2017 at 8:00 PM
To: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>, 
"users@cloudstack.apache.org" <users@cloudstack.apache.org>
Cc: Paul Angus <paul.an...@shapeblue.com>
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Thank you for your help

Do I need to specify what port the vlan are going to use?

1.- create vlnas
conf t
vlan 65,300-800
end

2.-
conf t
switchport mode trunk
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 65,300-800
end



From: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>
To: "users@cloudstack.apache.org" <users@cloudstack.apache.org>; Luis 
<lmartinez...@yahoo.com>
Cc: Paul Angus <paul.an...@shapeblue.com>
Sent: Friday, September 8, 2017 9:42 AM
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Hi Luis,
I have configured Cisco 3750G switch for my CloudStack advanced mode setup. 
Configuration should be the similar for Cisco 3560 as well, probably might help 
you.

>> 4 Nics: 2 for Management-Storage (LACP) and 2 for Public-Guest
Make sure to setup the VLANs before configuring the switch ports for interfaces 
meant for Public and Guest traffic
conf t
vlan ,
end
Please note that the VLAN range meant for public traffic are routable (with 
subnet assigned)
Configure the switch ports for Public and Guest traffic
switchport mode trunk
switchport trunk encapsulation dot1q
switchport trunk allowed vlan ,
Ex: If 100 is VLAN ID of routable VLAN meant for public traffic, and VLAN IDs 
500 to 600 are guest (zone) VLANs, then above command looks like,
switchport trunk allowed vlan 100,500-600

Regards,
Sateesh Chodapuneedi,
CloudStack Development,
Engineering, http://accelerite.com<http://accelerite.com/>
Santa Clara, 95054, CA
@accelerite

-Original Message-
From: Luis 
<lmartinez...@yahoo.com.INVALID<mailto:lmartinez...@yahoo.com.INVALID>>
Reply-To: "users@cloudstack.apache.org<mailto:users@cloudstack.apache.org>" 
<users@cloudstack.apache.org<mailto:users@cloudstack.apache.org>>, Luis 
<lmartinez...@yahoo.com<mailto:lmartinez...@yahoo.com>>
Date: Friday, 8 September 2017 at 5:39 PM
To: Paul Angus <paul.an...@shapeblue.com<mai

Re: Installing Cloud Stack 4.10

[Luis]

Thank you, I didn't see that


  From: Dag Sonstebo <dag.sonst...@shapeblue.com>
 To: "users@cloudstack.apache.org" <users@cloudstack.apache.org> 
 Sent: Saturday, September 9, 2017 4:36 AM
 Subject: Re: Installing Cloud Stack 4.10
   
You’ve typo’ed the hostname Luis:

“Trying to add a new host at http://10.0.040 in data center….”

Regards,
Dag Sonstebo
Cloud Architect
ShapeBlue

On 09/09/2017, 01:14, "Luis" <lmartinez...@yahoo.com.INVALID> wrote:

    Hi
    After some help from the group I started the installation of Cloud Stack 
4.10 but when running the configuration I got the error that my XenServer was 
missing some fixes, my xenserver 7 has all fixes, does any one has an idea what 
the problem could be?
    I ran all fixes on my server and at the end I restarted XenServer or I need 
to restart the server every time the fix requires to do it?
    Thank you for your help
    Ubuntu 14.04XenServer 7CS: 4.10
    
    2017-09-08 20:12:48,810 WARN  [c.c.a.d.ParamGenericValidationWorker] 
(catalina-exec-14:ctx-4d775a77 ctx-d4ff0eed) (logid:b1216b0c) Received unknown 
parameters for command addHost. Unknown parameters : clustertype2017-09-08 
20:12:48,840 INFO  [c.c.r.ResourceManagerImpl] (catalina-exec-14:ctx-4d775a77 
ctx-d4ff0eed) (logid:b1216b0c) Trying to add a new host at http://10.0.040 in 
data center 12017-09-08 20:12:48,921 DEBUG [c.c.h.x.r.XenServerConnectionPool] 
(catalina-exec-14:ctx-4d775a77 ctx-d4ff0eed) (logid:b1216b0c) Unable to create 
master connection to host(127.0.0.1) , due to 
org.apache.xmlrpc.XmlRpcException: Failed to read server's response: Connection 
refused (Connection refused)2017-09-08 20:12:48,923 DEBUG 
[c.c.h.x.d.XcpServerDiscoverer] (catalina-exec-14:ctx-4d775a77 ctx-d4ff0eed) 
(logid:b1216b0c) other exceptions: 
com.cloud.utils.exception.CloudRuntimeException: Unable to create master 
connection to host(127.0.0.1) , due to org.apache.xmlrpc.XmlRpcException: 
Failed to read server's response: Connection refused (Connection 
refused)com.cloud.utils.exception.CloudRuntimeException: Unable to create 
master connection to host(127.0.0.1) , due to 
org.apache.xmlrpc.XmlRpcException: Failed to read server's response: Connection 
refused (Connection refused)
    


dag.sonst...@shapeblue.com 
www.shapeblue.com
53 Chandos Place, Covent Garden, London  WC2N 4HSUK
@shapeblue
  
 



   

Re: Configuring CS with Advance Networking for an internal laboratory

[Luis]

Thank you
Yes, I am using LACP bond on Gi0/11-12 for public and guest, I setup the 
traffice labes on XenServer and when configuring CS public-guest, I am using 
Ubuntu, do I need the cloudbro and cloudbr1?
I will try removing 
Switchport mode access

  From: Imran Ahmed <im...@eaxiom.net>
 To: users@cloudstack.apache.org 
 Sent: Saturday, September 9, 2017 12:59 AM
 Subject: RE: Configuring CS with Advance Networking for an internal laboratory
   
I don’t think you need this line at least:

Switchport mode access

I assume that you use the LACP bond that bonds interfaces:  Gi0/11 and Gi0/12  
to carry both public traffic as well as guest traffic.

The next factor is the  traffic labels you set in your  Cloudstack advanced 
zone setup .

Another factor is the  configuration of  cloudbro and Cloudbr1  bridges  in 
your interface configurations.


By the way  are you using  CentOS or Ubuntu or Suse or ..?


Regards,


Imran 

-Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: Saturday, September 09, 2017 9:07 AM
To: users@cloudstack.apache.org
Cc: Paul Angus
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Hi

I am testing my CS with Advance Networking but it's not able to download iso or 
the templates, I think this is because of my VLAN configuration, s-vm or v-vm 
can't ping to internet, I did set up this parameter 
(secstorage.allowed.internal.sites) to my manager and host ip.
This is my VLAN configuration, please any advice on this issue
conf tinterface range Gi0/11-12switchport trunk encapsulation dot1q switchport 
mode trunkswitchport trunk allowed vlan 65,300-800switchport mode 
accesschannel-group 4 mode activechannel-protocol lacpend 

Thank you


      From: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>
 To: Luis <lmartinez...@yahoo.com>; "users@cloudstack.apache.org" 
<users@cloudstack.apache.org> 
Cc: Paul Angus <paul.an...@shapeblue.com>
 Sent: Friday, September 8, 2017 10:48 AM
 Subject: Re: Configuring CS with Advance Networking for an internal laboratory
  
Hi Luis,

>.Do I need to specify what port the vlan are going to use?
Yes, selection of interfaces/ports need to be done. Please add command 
“interface range Gi0/9 – 10” after command “conf t”
Also add “no switchport mode access” just before the command “end”

Hope that helps.

Regards,
Sateesh Chodapuneedi,
CloudStack Development,
Engineering, http://accelerite.com<http://accelerite.com/>
Santa Clara, 95054, CA
@accelerite

From: Luis <lmartinez...@yahoo.com>
Reply-To: Luis <lmartinez...@yahoo.com>
Date: Friday, 8 September 2017 at 8:00 PM
To: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>, 
"users@cloudstack.apache.org" <users@cloudstack.apache.org>
Cc: Paul Angus <paul.an...@shapeblue.com>
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Thank you for your help

Do I need to specify what port the vlan are going to use?

1.- create vlnas
conf t
vlan 65,300-800
end

2.-
conf t
switchport mode trunk
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 65,300-800
end



From: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>
To: "users@cloudstack.apache.org" <users@cloudstack.apache.org>; Luis 
<lmartinez...@yahoo.com>
Cc: Paul Angus <paul.an...@shapeblue.com>
Sent: Friday, September 8, 2017 9:42 AM
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Hi Luis,
I have configured Cisco 3750G switch for my CloudStack advanced mode setup. 
Configuration should be the similar for Cisco 3560 as well, probably might help 
you.

>> 4 Nics: 2 for Management-Storage (LACP) and 2 for Public-Guest
Make sure to setup the VLANs before configuring the switch ports for interfaces 
meant for Public and Guest traffic
conf t
vlan ,
end
Please note that the VLAN range meant for public traffic are routable (with 
subnet assigned)
Configure the switch ports for Public and Guest traffic
switchport mode trunk
switchport trunk encapsulation dot1q
switchport trunk allowed vlan ,
Ex: If 100 is VLAN ID of routable VLAN meant for public traffic, and VLAN IDs 
500 to 600 are guest (zone) VLANs, then above command looks like,
switchport trunk allowed vlan 100,500-600

Regards,
Sateesh Chodapuneedi,
CloudStack Development,
Engineering, http://accelerite.com<http://accelerite.com/>
Santa Clara, 95054, CA
@accelerite

-Original Message-
From: Luis 
<lmartinez...@yahoo.com.INVALID<mailto:lmartinez...@yahoo.com.INVALID>>
Reply-To: "users@cloudstack.apache.org<mailto:users@cloudstack.apache.org>" 
<users@cloudstack.apache.org<mailto:users@cloudstack.apache.org>>, Luis 
<lmartinez...@yahoo.com<mailto:lmartinez...@yahoo.com>>
Date: Friday, 8 September 2017 at 5:39 P

Re: Configuring CS with Advance Networking for an internal laboratory

[Luis]

Hi

I am testing my CS with Advance Networking but it's not able to download iso or 
the templates, I think this is because of my VLAN configuration, s-vm or v-vm 
can't ping to internet, I did set up this parameter 
(secstorage.allowed.internal.sites) to my manager and host ip.
This is my VLAN configuration, please any advice on this issue
conf tinterface range Gi0/11-12switchport trunk encapsulation dot1q switchport 
mode trunkswitchport trunk allowed vlan 65,300-800switchport mode 
accesschannel-group 4 mode activechannel-protocol lacpend 

Thank you


  From: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>
 To: Luis <lmartinez...@yahoo.com>; "users@cloudstack.apache.org" 
<users@cloudstack.apache.org> 
Cc: Paul Angus <paul.an...@shapeblue.com>
 Sent: Friday, September 8, 2017 10:48 AM
 Subject: Re: Configuring CS with Advance Networking for an internal laboratory
   
Hi Luis,

>.Do I need to specify what port the vlan are going to use?
Yes, selection of interfaces/ports need to be done. Please add command 
“interface range Gi0/9 – 10” after command “conf t”
Also add “no switchport mode access” just before the command “end”

Hope that helps.

Regards,
Sateesh Chodapuneedi,
CloudStack Development,
Engineering, http://accelerite.com<http://accelerite.com/>
Santa Clara, 95054, CA
@accelerite

From: Luis <lmartinez...@yahoo.com>
Reply-To: Luis <lmartinez...@yahoo.com>
Date: Friday, 8 September 2017 at 8:00 PM
To: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>, 
"users@cloudstack.apache.org" <users@cloudstack.apache.org>
Cc: Paul Angus <paul.an...@shapeblue.com>
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Thank you for your help

Do I need to specify what port the vlan are going to use?

1.- create vlnas
conf t
vlan 65,300-800
end

2.-
conf t
switchport mode trunk
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 65,300-800
end



From: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>
To: "users@cloudstack.apache.org" <users@cloudstack.apache.org>; Luis 
<lmartinez...@yahoo.com>
Cc: Paul Angus <paul.an...@shapeblue.com>
Sent: Friday, September 8, 2017 9:42 AM
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

Hi Luis,
I have configured Cisco 3750G switch for my CloudStack advanced mode setup. 
Configuration should be the similar for Cisco 3560 as well, probably might help 
you.

>> 4 Nics: 2 for Management-Storage (LACP) and 2 for Public-Guest
Make sure to setup the VLANs before configuring the switch ports for interfaces 
meant for Public and Guest traffic
conf t
vlan ,
end
Please note that the VLAN range meant for public traffic are routable (with 
subnet assigned)
Configure the switch ports for Public and Guest traffic
switchport mode trunk
switchport trunk encapsulation dot1q
switchport trunk allowed vlan ,
Ex: If 100 is VLAN ID of routable VLAN meant for public traffic, and VLAN IDs 
500 to 600 are guest (zone) VLANs, then above command looks like,
switchport trunk allowed vlan 100,500-600

Regards,
Sateesh Chodapuneedi,
CloudStack Development,
Engineering, http://accelerite.com<http://accelerite.com/>
Santa Clara, 95054, CA
@accelerite

-Original Message-
From: Luis 
<lmartinez...@yahoo.com.INVALID<mailto:lmartinez...@yahoo.com.INVALID>>
Reply-To: "users@cloudstack.apache.org<mailto:users@cloudstack.apache.org>" 
<users@cloudstack.apache.org<mailto:users@cloudstack.apache.org>>, Luis 
<lmartinez...@yahoo.com<mailto:lmartinez...@yahoo.com>>
Date: Friday, 8 September 2017 at 5:39 PM
To: Paul Angus <paul.an...@shapeblue.com<mailto:paul.an...@shapeblue.com>>, 
"users@cloudstack.apache.org<mailto:users@cloudstack.apache.org>" 
<users@cloudstack.apache.org<mailto:users@cloudstack.apache.org>>
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

    Thank you Paul
    Your article is really helpful, I think my problem is finding the correct 
commands to setup the switch, this is what I have
    CS 4.10: on Ubuntu 14.044 nics: 2 for management (LACP) and 2 for Storage 
(LACP)
    XenServer for host4 Nics: 2 for Management-Storage (LACP) and 2 for 
Public-Guest
    Is it possible for you or the group to help me with the lines to set up 
correctly  the Cisco Switch, I will appreciate your help
    Cisco Switch 3560Ports: 9 - 10 for Management-storageconf tinterface range 
Gi0/9 - 10switchport mode accessno shutchannel-group 3 mode 
activechannel-protocol lacpend
    Port 11 - 12 for Piblic-Guest
    conf tinterface range Gi0/11 - 12switchport mode accessno shutchannel-group 
4 mode activechannel-protocol lacpend      From: Paul Angus 
<paul.an...@shapeblue.com<mailto:paul.an...@shapeblue.com>>
    To

Re: Installing Cloud Stack 4.10

[Luis]

Hi
I cant to let you know that I reinstalled XenServer 7 and installed Fix Packs 
and I let the system to restart by request of the fix pack and I was able to 
finish the configuration so, it is necessary to let XenServerbe restarted by 
the fix pack as many times as needed. 

  From: Luis <lmartinez...@yahoo.com>
 To: Users <users@cloudstack.apache.org>; "users-h...@cloudstack.apache.org" 
<users-h...@cloudstack.apache.org> 
 Sent: Friday, September 8, 2017 8:14 PM
 Subject: Installing Cloud Stack 4.10
   
Hi
After some help from the group I started the installation of Cloud Stack 4.10 
but when running the configuration I got the error that my XenServer was 
missing some fixes, my xenserver 7 has all fixes, does any one has an idea what 
the problem could be?
I ran all fixes on my server and at the end I restarted XenServer or I need to 
restart the server every time the fix requires to do it?
Thank you for your help
Ubuntu 14.04XenServer 7CS: 4.10

2017-09-08 20:12:48,810 WARN  [c.c.a.d.ParamGenericValidationWorker] 
(catalina-exec-14:ctx-4d775a77 ctx-d4ff0eed) (logid:b1216b0c) Received unknown 
parameters for command addHost. Unknown parameters : clustertype2017-09-08 
20:12:48,840 INFO  [c.c.r.ResourceManagerImpl] (catalina-exec-14:ctx-4d775a77 
ctx-d4ff0eed) (logid:b1216b0c) Trying to add a new host at http://10.0.040 in 
data center 12017-09-08 20:12:48,921 DEBUG [c.c.h.x.r.XenServerConnectionPool] 
(catalina-exec-14:ctx-4d775a77 ctx-d4ff0eed) (logid:b1216b0c) Unable to create 
master connection to host(127.0.0.1) , due to 
org.apache.xmlrpc.XmlRpcException: Failed to read server's response: Connection 
refused (Connection refused)2017-09-08 20:12:48,923 DEBUG 
[c.c.h.x.d.XcpServerDiscoverer] (catalina-exec-14:ctx-4d775a77 ctx-d4ff0eed) 
(logid:b1216b0c) other exceptions: 
com.cloud.utils.exception.CloudRuntimeException: Unable to create master 
connection to host(127.0.0.1) , due to org.apache.xmlrpc.XmlRpcException: 
Failed to read server's response: Connection refused (Connection 
refused)com.cloud.utils.exception.CloudRuntimeException: Unable to create 
master connection to host(127.0.0.1) , due to 
org.apache.xmlrpc.XmlRpcException: Failed to read server's response: Connection 
refused (Connection refused)


   

Installing Cloud Stack 4.10

[Luis]

Hi
After some help from the group I started the installation of Cloud Stack 4.10 
but when running the configuration I got the error that my XenServer was 
missing some fixes, my xenserver 7 has all fixes, does any one has an idea what 
the problem could be?
I ran all fixes on my server and at the end I restarted XenServer or I need to 
restart the server every time the fix requires to do it?
Thank you for your help
Ubuntu 14.04XenServer 7CS: 4.10

2017-09-08 20:12:48,810 WARN  [c.c.a.d.ParamGenericValidationWorker] 
(catalina-exec-14:ctx-4d775a77 ctx-d4ff0eed) (logid:b1216b0c) Received unknown 
parameters for command addHost. Unknown parameters : clustertype2017-09-08 
20:12:48,840 INFO  [c.c.r.ResourceManagerImpl] (catalina-exec-14:ctx-4d775a77 
ctx-d4ff0eed) (logid:b1216b0c) Trying to add a new host at http://10.0.040 in 
data center 12017-09-08 20:12:48,921 DEBUG [c.c.h.x.r.XenServerConnectionPool] 
(catalina-exec-14:ctx-4d775a77 ctx-d4ff0eed) (logid:b1216b0c) Unable to create 
master connection to host(127.0.0.1) , due to 
org.apache.xmlrpc.XmlRpcException: Failed to read server's response: Connection 
refused (Connection refused)2017-09-08 20:12:48,923 DEBUG 
[c.c.h.x.d.XcpServerDiscoverer] (catalina-exec-14:ctx-4d775a77 ctx-d4ff0eed) 
(logid:b1216b0c) other exceptions: 
com.cloud.utils.exception.CloudRuntimeException: Unable to create master 
connection to host(127.0.0.1) , due to org.apache.xmlrpc.XmlRpcException: 
Failed to read server's response: Connection refused (Connection 
refused)com.cloud.utils.exception.CloudRuntimeException: Unable to create 
master connection to host(127.0.0.1) , due to 
org.apache.xmlrpc.XmlRpcException: Failed to read server's response: Connection 
refused (Connection refused)

Re: Configuring CS with Advance Networking for an internal laboratory

[Luis]

Thank you for your help
Do I need to specify what port the vlan are going to use?
1.- create vlnasconf tvlan 65,300-800end
2.- conf tswitchport mode trunkswitchport trunk encapsulation dot1q switchport 
trunk allowed vlan 65,300-800end 


  From: Sateesh Chodapuneedi <sateesh.chodapune...@accelerite.com>
 To: "users@cloudstack.apache.org" <users@cloudstack.apache.org>; Luis 
<lmartinez...@yahoo.com> 
Cc: Paul Angus <paul.an...@shapeblue.com>
 Sent: Friday, September 8, 2017 9:42 AM
 Subject: Re: Configuring CS with Advance Networking for an internal laboratory
   
Hi Luis,
I have configured Cisco 3750G switch for my CloudStack advanced mode setup. 
Configuration should be the similar for Cisco 3560 as well, probably might help 
you.

>> 4 Nics: 2 for Management-Storage (LACP) and 2 for Public-Guest
Make sure to setup the VLANs before configuring the switch ports for interfaces 
meant for Public and Guest traffic
conf t
vlan ,
end
Please note that the VLAN range meant for public traffic are routable (with 
subnet assigned)
Configure the switch ports for Public and Guest traffic
switchport mode trunk
switchport trunk encapsulation dot1q 
switchport trunk allowed vlan , 
Ex: If 100 is VLAN ID of routable VLAN meant for public traffic, and VLAN IDs 
500 to 600 are guest (zone) VLANs, then above command looks like,
switchport trunk allowed vlan 100,500-600

Regards,
Sateesh Chodapuneedi,
CloudStack Development,
Engineering, http://accelerite.com
Santa Clara, 95054, CA
@accelerite

-Original Message-
From: Luis <lmartinez...@yahoo.com.INVALID>
Reply-To: "users@cloudstack.apache.org" <users@cloudstack.apache.org>, Luis 
<lmartinez...@yahoo.com>
Date: Friday, 8 September 2017 at 5:39 PM
To: Paul Angus <paul.an...@shapeblue.com>, "users@cloudstack.apache.org" 
<users@cloudstack.apache.org>
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

    Thank you Paul
    Your article is really helpful, I think my problem is finding the correct 
commands to setup the switch, this is what I have
    CS 4.10: on Ubuntu 14.044 nics: 2 for management (LACP) and 2 for Storage 
(LACP)
    XenServer for host4 Nics: 2 for Management-Storage (LACP) and 2 for 
Public-Guest
    Is it possible for you or the group to help me with the lines to set up 
correctly  the Cisco Switch, I will appreciate your help
    Cisco Switch 3560Ports: 9 - 10 for Management-storageconf tinterface range 
Gi0/9 - 10switchport mode accessno shutchannel-group 3 mode 
activechannel-protocol lacpend
    Port 11 - 12 for Piblic-Guest
    conf tinterface range Gi0/11 - 12switchport mode accessno shutchannel-group 
4 mode activechannel-protocol lacpend      From: Paul Angus 
<paul.an...@shapeblue.com>
    To: "users@cloudstack.apache.org" <users@cloudstack.apache.org>; Luis 
<lmartinez...@yahoo.com> 
    Sent: Friday, September 8, 2017 5:19 AM
    Subject: RE: Configuring CS with Advance Networking for an internal 
laboratory
      
    Luis,
    
    You may find this blog from yester-year helpful:
    
    
http://www.shapeblue.com/understanding-cloudstacks-physical-networking-architecture/
    
    
    Kind regards,
    
    Paul Angus
    
    paul.an...@shapeblue.com 
    www.shapeblue.com
    53 Chandos Place, Covent Garden, London  WC2N 4HSUK
    @shapeblue
      
    
    
    
    -Original Message-
    From: Paul Angus [mailto:paul.an...@shapeblue.com] 
    Sent: 07 September 2017 22:12
    To: Luis <lmartinez...@yahoo.com>; users@cloudstack.apache.org
    Subject: RE: Configuring CS with Advance Networking for an internal 
laboratory
    
    No problem Luis,
    
    
      1.  Advanced networking replies on VLANs (or some SDN isolation method), 
so you need at have a range of VLANs free, that you tell CloudStack that it can 
use.
      2.  The IP ranges I described were only an example you can you any range 
you like, but ‘public’ traffic generally is going to require a gateway in order 
to ‘go’ somewhere.
      3.  I looks to me like you are setting all of your interfaces as access 
ports. You’ll need ports which deal with multiple VLANs (like ones used for 
guest networks) to be trunk ports – with the VLANs which are allowed matching 
those that you have told CloudStack that it can use.
    
    
    Kind regards,
    
    Paul Angus
    
    
    paul.an...@shapeblue.com
    www.shapeblue.com
    53 Chandos Place, Covent Garden, London  WC2N 4HSUK @shapeblue
      
    
    
    From: Luis [mailto:lmartinez...@yahoo.com]
    Sent: 07 September 2017 20:32
    To: Paul Angus <paul.an...@shapeblue.com>; users@cloudstack.apache.org
    Subject: Re: Configuring CS with Advance Networking for an internal 
laboratory
    
    thank you for your help, I have some questions if you can help me to answer 
this
    
    1.- can i not use VLAN's for Advance Networking or a

Re: Configuring CS with Advance Networking for an internal laboratory

[Luis]

Thank you Paul
Your article is really helpful, I think my problem is finding the correct 
commands to setup the switch, this is what I have
CS 4.10: on Ubuntu 14.044 nics: 2 for management (LACP) and 2 for Storage (LACP)
XenServer for host4 Nics: 2 for Management-Storage (LACP) and 2 for Public-Guest
Is it possible for you or the group to help me with the lines to set up 
correctly  the Cisco Switch, I will appreciate your help
Cisco Switch 3560Ports: 9 - 10 for Management-storageconf tinterface range 
Gi0/9 - 10switchport mode accessno shutchannel-group 3 mode 
activechannel-protocol lacpend
Port 11 - 12 for Piblic-Guest
conf tinterface range Gi0/11 - 12switchport mode accessno shutchannel-group 4 
mode activechannel-protocol lacpend  From: Paul Angus 
<paul.an...@shapeblue.com>
 To: "users@cloudstack.apache.org" <users@cloudstack.apache.org>; Luis 
<lmartinez...@yahoo.com> 
 Sent: Friday, September 8, 2017 5:19 AM
 Subject: RE: Configuring CS with Advance Networking for an internal laboratory
   
Luis,

You may find this blog from yester-year helpful:

http://www.shapeblue.com/understanding-cloudstacks-physical-networking-architecture/


Kind regards,

Paul Angus

paul.an...@shapeblue.com 
www.shapeblue.com
53 Chandos Place, Covent Garden, London  WC2N 4HSUK
@shapeblue
  
 


-Original Message-
From: Paul Angus [mailto:paul.an...@shapeblue.com] 
Sent: 07 September 2017 22:12
To: Luis <lmartinez...@yahoo.com>; users@cloudstack.apache.org
Subject: RE: Configuring CS with Advance Networking for an internal laboratory

No problem Luis,


  1.  Advanced networking replies on VLANs (or some SDN isolation method), so 
you need at have a range of VLANs free, that you tell CloudStack that it can 
use.
  2.  The IP ranges I described were only an example you can you any range you 
like, but ‘public’ traffic generally is going to require a gateway in order to 
‘go’ somewhere.
  3.  I looks to me like you are setting all of your interfaces as access 
ports. You’ll need ports which deal with multiple VLANs (like ones used for 
guest networks) to be trunk ports – with the VLANs which are allowed matching 
those that you have told CloudStack that it can use.


Kind regards,

Paul Angus


paul.an...@shapeblue.com
www.shapeblue.com
53 Chandos Place, Covent Garden, London  WC2N 4HSUK @shapeblue
  
 

From: Luis [mailto:lmartinez...@yahoo.com]
Sent: 07 September 2017 20:32
To: Paul Angus <paul.an...@shapeblue.com>; users@cloudstack.apache.org
Subject: Re: Configuring CS with Advance Networking for an internal laboratory

thank you for your help, I have some questions if you can help me to answer this

1.- can i not use VLAN's for Advance Networking or are necessary for the 
configuration

2.- Do I need to create an extra server ans use it as gateway for this range of 
IP's?

3.- this is what I am using to create my vlan's on a Cisco 3560, is this 
correct?
conf t
interface range Gi0/9 - 10
switchport mode access
no shut
switchport access vlan 65
channel-group 3 mode active
channel-protocol lacp
end

Thank you for your help



From: Paul Angus <paul.an...@shapeblue.com<mailto:paul.an...@shapeblue.com>>
To: "users@cloudstack.apache.org<mailto:users@cloudstack.apache.org>" 
<users@cloudstack.apache.org<mailto:users@cloudstack.apache.org>>; Luis 
<lmartinez...@yahoo.com<mailto:lmartinez...@yahoo.com>>
Sent: Thursday, September 7, 2017 3:05 PM
Subject: RE: Configuring CS with Advance Networking for an internal laboratory

Hi Luis,

You can give CloudStack a range of RFC1918 addresses (ie private addresses) to 
act as an 'internal' public network.

10.0.1.10 - 10.0.1.30
GW: 10.0.1.254
Netmask - 255.255.255.0

If the gateway at 10.0.1.254 can route to the outside world then CloudStack 
will still be able to download templates, if not you can always register a 
template which you are hosting on an internal network.

If you do the second option ensure that the global setting 
'secstorage.allowed.internal.sites'  includes the hosting server's IP address.



Kind regards,

Paul Angus

paul.an...@shapeblue.com<mailto:paul.an...@shapeblue.com>
www.shapeblue.com<http://www.shapeblue.com>
53 Chandos Place, Covent Garden, London  WC2N 4HSUK @shapeblue



-Original Message-
From: Luis 
[mailto:lmartinez...@yahoo.com.INVALID<mailto:lmartinez...@yahoo.com.INVALID>]
Sent: 07 September 2017 18:42
To: Users <users@cloudstack.apache.org<mailto:users@cloudstack.apache.org>>
Subject: Configuring CS with Advance Networking for an internal laboratory

Hi
I am configuring CS with Advance Networking for internal use without rotatable 
IP's, this is for testing and lean CS Advance Networking, This is what I have 
CS 4.10XenServer 7.0FreeNas CS is already installed but I can't download any 
iso because V-Router can't ping outside my network, any advice?
Public IP:209.229.131.0Internal IP: 10.0.0.0 Thank you for your help.



   

Re: Configuring CS with Advance Networking for an internal laboratory

[Luis]

thank you for your help, I have some questions if you can help me to answer this
1.- can i not use VLAN's for Advance Networking or are necessary for the 
configuration
2.- Do I need to create an extra server ans use it as gateway for this range of 
IP's? 
3.- this is what I am using to create my vlan's on a Cisco 3560, is this 
correct?conf tinterface range Gi0/9 - 10switchport mode accessno shutswitchport 
access vlan 65channel-group 3 mode activechannel-protocol lacpend
Thank you for your help


  From: Paul Angus <paul.an...@shapeblue.com>
 To: "users@cloudstack.apache.org" <users@cloudstack.apache.org>; Luis 
<lmartinez...@yahoo.com> 
 Sent: Thursday, September 7, 2017 3:05 PM
 Subject: RE: Configuring CS with Advance Networking for an internal laboratory
   
Hi Luis, 

You can give CloudStack a range of RFC1918 addresses (ie private addresses) to 
act as an 'internal' public network.

10.0.1.10 - 10.0.1.30
GW: 10.0.1.254
Netmask - 255.255.255.0

If the gateway at 10.0.1.254 can route to the outside world then CloudStack 
will still be able to download templates, if not you can always register a 
template which you are hosting on an internal network.

If you do the second option ensure that the global setting 
'secstorage.allowed.internal.sites'  includes the hosting server's IP address.



Kind regards,

Paul Angus

paul.an...@shapeblue.com 
www.shapeblue.com
53 Chandos Place, Covent Garden, London  WC2N 4HSUK
@shapeblue
  
 


-Original Message-
From: Luis [mailto:lmartinez...@yahoo.com.INVALID] 
Sent: 07 September 2017 18:42
To: Users <users@cloudstack.apache.org>
Subject: Configuring CS with Advance Networking for an internal laboratory

Hi
I am configuring CS with Advance Networking for internal use without rotatable 
IP's, this is for testing and lean CS Advance Networking, This is what I have 
CS 4.10XenServer 7.0FreeNas CS is already installed but I can't download any 
iso because V-Router can't ping outside my network, any advice?
Public IP:209.229.131.0Internal IP: 10.0.0.0 Thank you for your help.


   

Configuring CS with Advance Networking for an internal laboratory

[Luis]

Hi
I am configuring CS with Advance Networking for internal use without rotatable 
IP's, this is for testing and lean CS Advance Networking, This is what I have
CS 4.10XenServer 7.0FreeNas
CS is already installed but I can't download any iso because V-Router can't 
ping outside my network, any advice?
Public IP:209.229.131.0Internal IP: 10.0.0.0
Thank you for your help.

Re: CloudStack 4.10 system VM without ip

[Luis]

Thank you

  From: Raja Pullela <raja.pull...@accelerite.com>
 To: "users@cloudstack.apache.org" <users@cloudstack.apache.org>; 
"lmartinez...@yahoo.com" <lmartinez...@yahoo.com> 
 Sent: Wednesday, September 6, 2017 10:50 PM
 Subject: Re: CloudStack 4.10 system VM without ip
   
Hi Luis,

4.10 release does not support XenServer 7.2.  You will have to downgrade to 7.0.
Good luck!
Raja
Engineering, Accelerite
http://www.accelerite.com 




On 9/7/17, 6:43 AM, "Luis" <lmartinez...@yahoo.com.INVALID> wrote:

>Hi
>I installed CS 4.10 with XenServer 7.2, after configuring CS the system VM 
>were created but without ip, is 4.10 ready for testing? I see it as ready on 
>the website but is not working for me.
>Greetings.
>
>Sent from Yahoo Mail on Android
DISCLAIMER
==
This e-mail may contain privileged and confidential information which is the 
property of Accelerite, a Persistent Systems business. It is intended only for 
the use of the individual or entity to which it is addressed. If you are not 
the intended recipient, you are not authorized to read, retain, copy, print, 
distribute or use this message. If you have received this communication in 
error, please notify the sender and delete all copies of this message. 
Accelerite, a Persistent Systems business does not accept any liability for 
virus infected mails.


   

CloudStack 4.10 system VM without ip

[Luis]

Hi
I installed CS 4.10 with XenServer 7.2, after configuring CS the system VM were 
created but without ip, is 4.10 ready for testing? I see it as ready on the 
website but is not working for me.
Greetings.

Sent from Yahoo Mail on Android

Question about Advance networking configuration

[Luis]

Hi
I am configuring an advance networking and thanks to Simon Weller and Daniel 
Herrmann to clarify the VLAN configuration, after configuring the VLAN 
correctly I created a VM, this starts correctly but when I try to see the 
console I get an error that can't be displayed, this is what I am using, i am 
connected to my manager server using 10.0.0.0 and the browser can't display the 
console on the public ip 209.229.131.11,
Some of my questions are, why is trying to use an ip from the public range and 
not one from the internal ip's?Can I block users from acquiring public ip and 
let the admin to assign the ip to the client?On my XenServer I have the VM I 
created and 5 more, is this correct?



management :10.0.0.0public: 209.229.131.0
thank you for your help.

CS VLAN configuration in a Cisco 3560 switch

[Luis]

Hi
I have a question, following the manual for an advance networking I am trying 
to configure VLAN's in a Cisco 3560 but i am cofuse, is this all I need
Can somebody post a complete example base on their experience?
Thank you.

This is what I have
untagged  VLAN 65 for public traffice
tagged VLAN traffic for ranges 600-1000

for tagged trafficeinterface GigabitEthernet1/0/1
switchport trunk encapsulation dot1q
switchport mode trunk
switchport trunk native vlan 100-900
exit

Re: KVM evaluation

[Luis]

Hi
I use to run a Basic Set Up of CS 4.6 with KVM, I never had a problem running 
different distributions of Ubuntu, CentOS, Windows XP, Vista or 2012, CS 
running on Ubuntu 14.04 and two host with CentOS 6.2, I also tried XenServer 
6.5, I had a good experience now I am trying to do an Advance installation

  From: S. Brüseke - proIO GmbH 
 To: users@cloudstack.apache.org 
 Sent: Monday, August 14, 2017 5:48 AM
 Subject: KVM evaluation
   
Hi,

we want to give KVM a change in our CS installation. Can somebody provide 
his/her experience?
- Which version of KVM are you using?
- What host OS are you running KVM on?
- What do you tweak on your KVM installations?

Thank you very much for sharing this information!

Mit freundlichen Grüßen / With kind regards,

Swen



- proIO GmbH -
Geschäftsführer: Swen Brüseke
Sitz der Gesellschaft: Frankfurt am Main

USt-IdNr. DE 267 075 918
Registergericht: Frankfurt am Main - HRB 86239

Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. 
Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten 
haben, 
informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. 
Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail sind nicht 
gestattet. 

This e-mail may contain confidential and/or privileged information. 
If you are not the intended recipient (or have received this e-mail in error) 
please notify 
the sender immediately and destroy this e-mail.  
Any unauthorized copying, disclosure or distribution of the material in this 
e-mail is strictly forbidden. 



   

Re: CloudStack with advance networking

[Luis]

Thank you for your replay
I have a zone running but the Vlan's were not communicating I don't know if 
they need an special configuration or just create the VLAN, then I created a 
new installation with no vlans but secondary storage is not mounted it looks 
like is not communicating with gateway, I am trying to do an advance zone 
configuration but I am using internal IPs for public traffic, this is for a 
laboratory, do you know how I should create the VLNAN's? I am using a Cisco 3560
Public IP's: 209.229.131.0/24Internal IP's:10.0.0.0/24
but the gateway for the public traffic is not working.

  From: ilya <ilya.mailing.li...@gmail.com>
 To: users@cloudstack.apache.org 
 Sent: Monday, July 24, 2017 7:42 PM
 Subject: Re: CloudStack with advance networking
   
I looked over the guide - for current version - this guide is overly
complex - it was also written 4 years ago.

As of 4.3+, all of the things you need can be handled in the UI.

It should take about 10 minutes to get the zone up - assuming you have
your environment properly configured.

I will make a refreshed simplified version of this tutorial when time
allows.

On 7/19/17 1:16 PM, Taylor wrote:
> I am using it in a proof of concept to test out how quickly we could adopt it 
> in production.
> 
> 
> I dont know the answer to your question at this point, I am too new to the 
> stack. But I am currently reading articles like this one: 
> https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+Advanced+Network+Tutorial+-+Step+by+Step
> 
> Good luck!
> 
> Can anyone else offer advice?
> 
> 
> From: Luis <lmartinez...@yahoo.com>
> Sent: Wednesday, July 19, 2017 3:57 PM
> To: tschnei...@live.com
> Subject: Re: CloudStack with advance networking
> 
> Thank you for your replay, do you use it for production or personnal use?
> 
> I have a diagram but i dont know if the vlans need some special co figuration 
> like routing.
> 
> Sent from Yahoo Mail on 
> Android<https://overview.mail.yahoo.com/mobile/?.src=Android>
> 
> On Wed, Jul 19, 2017 at 1:02 PM, Taylor
> <tschnei...@live.com> wrote:
> 
> I have not tried the advanced install yet but I am preparing to.
> 
> Give this article a read: 
> http://www.shapeblue.com/understanding-cloudstacks-physical-networking-architecture/
> 
> You bascially need to determine which vlans you want to host which traffic. 
> Then determine which NICs are connected to which VLANS for all your servers 
> (CS, NFS, Hypervisor). You will need to name the vSwitches in XenServer.
> 
> Sorry I cannot be more helpful.
> 
> Taylor
> 
> 
> 
> From: Luis 
> <lmartinez...@yahoo.com.INVALID<mailto:lmartinez...@yahoo.com.INVALID>>
> Sent: Wednesday, July 19, 2017 12:28 PM
> To: Users
> Subject: CloudStack with advance networking
> 
> Hi
> I am trying to set up CS with advance networking. This is what i have
> 1 server with CS Manager1 XenServer as node1 FreeNas for the primary and 
> secondary1 Cisco 3560
> My question is, how do i have to create the vlans, is there any special 
> configuration? Can some one give me an example?
> Thank you.
> 


   

Re: Help with CS

[Luis]

Hi
Thank you Boris
I am Luis Martinez I am a software engineer, I use to be a Java Developer and a 
Linux follower.
I have CloudStack with a Basic installation and now I want to create and 
Advance Networking installation, I want to use XenSever with CS I have 4 server.
My problem is that I don't know how many VLANs I have to use and create on the 
Switch and the IP's I should be using for every one of them, this is what I 
think, I am planing to use LACP linking two nics for the storage and the other 
two on LACP share it with Management, Guest and Public, I don't know if this is 
ok, is it possible for you to give me an example of an advance networking 
installation please.
4 VlansVlan 2 for Storage with an ip segment of 172.16.0.0 with LACP of two 
nicsVlan 3 for Public IP's, ISP should provide these with LACP with two nics 
shared with Management and Guest (Is this ok?)Vlan 4 for Management with ip 
segment of 10.0.0.0 with LACP with two nics shared with Public and Guest (Is 
this ok?)Vlan 5 for Guest with ip segoment of 192.168.1.0 with LACP with two 
nics shared with Management and Public (Is this ok?)
On the Cisco switch should I create a Vlan with IP and Etherchannel? I am going 
to use LACP with two nics
2 servers with these specs2 Xeon CPU wiht 8 cores earch one, 4 nics, 68GB (XEN 
SERVER)1 Xeon CPU with 4 cores  40 GB of ram and 10 TB of space (STORAGE)1 Xeon 
CPU with 4 cores and 32 GB of Ram (CS MANAGER)
1 cisco 3560 with 48 ports

I thinks this is all I have
 Thank you for your help.






   

Question about configuring and advance Installation

[Luis]

Hi
I am setting up and advance Installation of CloudStack and I wonder if some of 
you can guide me with this or any advice.
This is a configuration for Cloudstack with XenServer
Cisco switch 35601 server or VM's 4 nics, bounded in pairs LACP1 server for CS 
Manager 2 nics1 server for Storage 4 nics, bounded in pars LACP
I am planing to use 4 VLANS
Public Vlan: ISP ip'sStorage Vlan:172.16.0.0 Management Vlan: 10.0.0.0Guest 
Vlan: 192.168.0.0
Server running VM's: nic 1: communicating with storage, nic2: communicating 
with CSManagerCS Manager: nic1: communicating with storage, nic2: to access 
CSManagerStorage Server: nic1: for storage communication, nic2: communicating 
with CSManager.
Is this approach correct or not?
Thank you for your help in advance.

Re: Isolated Network Vlan Tag

[Luis M]

Hi forum.

How does this works, I just have to send an email with my question?



> On Dec 10, 2016, at 4:28 PM, Gian Paolo Buono  
> wrote:
> 
> Hi all,
> 
> Can I add an isolated network setting the tag (ex: 500) ?
> 
> Thanks

HA problem

[Luis]

Hi
I have a question, I have my VM configure with HA and every time I restart my 
cloudstack all my VM start automatic, the problem is that the CPU goes crazy 
working and some times it gets to hot that the serve shuts down, is there a way 
to tell HA to start a couple of Servers at a time?

Thank you for your help.

How to configure cloudstack for public use

[Luis]

Hi
I hope you can help me or give me an idea with this request

I have a client requesting me to install cloudstack but the client wants to be 
able to do what a norma ISP does when selling a VM, let users choose what they 
want and assign publics IP.
I will appreciate your comments or ideas.
This are a couple of questions I have.1.- Should I use advance zone for the 
Installation?2.- Can I use a pool of Public IP on cloudstack to be assigned on 
VM facing Internet?3.- I have PFSense in front of Cloudstack, should I let it 
handle the Public IP's and nat to a private IP?4.- Is there any open source 
tool that can monitor or limit the bandwidth for cloudstack?

Thank you for your help.

Expunge

[Luis]

Hi
I notice that when I Expunge VM the hard disk space is not returned, I still 
have the same use, I had to deleted manually from the raid, is this a bug or I 
am missing a comfiguration?

How can i access my VM from internet

[Luis]

Hi, I have cloudstack 4.1, it works fine and i can use view console from
inside of my network but when i am outside like in my office, i have no
access to view console, i get an error about the realhostip, please suggest
how can i fix this, i wonder if i can use apache and proxy to redirect,
please let me know.



Thank you.

Re: 回复: Re: Re: cloudstack的账号

[Luis]

Hi

Does any one knows the pre steps and post steps after installing cloudstack?

Thanks

Sent from Yahoo! Mail on Android

Re: cloudstack能提供虚拟机的历史性能曲线么

[Luis]

I wonder if some of the experts at this forum could put together a manual to 
install clouds tack on Ubuntu or centros I have being trying to install it with 
the official manual and is not working. May be if some body do it and takes 
notes and screen shots we could have a clear picture of what to do.

Thanks

Sent from Yahoo! Mail on Android

Re: CloudStack4.1+XS，请问XS集群最多容纳几台host？

[Luis]

This is in Chinese i don't speck Chinese 



On Sunday, November 3, 2013 10:15 PM, sunko2014 sunko2...@gmail.com wrote:
 
hello:
       1、CS4.1的官方文档说XS集群最多不要超过8台，但是XS的一个资源池是建议不要超过16台，请问有实际测过的没？哪个为准

Re: q

[Luis]

Hello

Sent from Yahoo! Mail on Android