[weewx-user] Re: Error by stopping Weewx

[gjr80]

Correct.

Gary

On Wednesday, 19 May 2021 at 07:39:22 UTC+10 Mauro De Lauretis wrote:

> Hi Gary, thank you for answer
>
> So the Traceback I get it's normal and not an error?
>
> Greetings
>
>
> Il giorno martedì 18 maggio 2021 alle 23:33:22 UTC+2 gjr80 ha scritto:
>
>> Normal operation. You (or something) told WeeWX to shutdown. WeeWX did as 
>> it was told and you received a lot of debug output in the log since you 
>> have debug > 0. It can be safely ignored in this case. If it troubles you 
>> set debug = 0.
>>
>> If there was an error or some other problem the tone/wording of the log 
>> entries would be different.
>>
>> Gary
>>
>> On Wednesday, 19 May 2021 at 07:17:38 UTC+10 Mauro De Lauretis wrote:
>>
>>> Hi
>>>
>>> Could somebody explain me what this error means by stopping Weewx?
>>>
>>> May 18 22:59:40 raspberrypi systemd[1]: Stopping LSB: weewx weather 
>>> system...
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] INFO __main__: Received signal 
>>> TERM (15).
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] INFO weewx.engine: Main loop 
>>> exiting. Shutting engine down.
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] INFO weewx.engine: Shutting down 
>>> StdReport thread
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG weewx.engine: StdReport 
>>> thread has been terminated
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG weewx.restx: Shut down 
>>> PWSWeather thread.
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG weewx.restx: Shut down 
>>> Wunderground-PWS thread.
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG weewx.restx: Shut down 
>>> StationRegistry thread.
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] INFO __main__: Terminating weewx 
>>> version 4.5.1
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
>>> Traceback (most recent call last):
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
>>> "/home/weewx/bin/weewxd", line 157, in main
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
>>> engine.run()
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
>>> "/home/weewx/bin/weewx/engine.py", line 208, in run
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
>>> for packet in self.console.genLoopPackets():
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
>>> "/home/weewx/bin/weewx/drivers/vantage.py", line 534, in genLoopPackets
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
>>> for _loop_packet in self.genDavisLoopPackets(200):
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
>>> "/home/weewx/bin/weewx/drivers/vantage.py", line 561, in genDavisLoopPackets
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
>>> loop_packet = self._get_packet()
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
>>> "/home/weewx/bin/weewx/drivers/vantage.py", line 574, in _get_packet
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
>>> _buffer = self.port.read(99)
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
>>> "/home/weewx/bin/weewx/drivers/vantage.py", line 280, in read
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
>>> _buffer = self.serial_port.read(chars)
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
>>> "/usr/lib/python3/dist-packages/serial/serialposix.py", line 483, in read
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
>>> ready, _, _ = select.select([self.fd, self.pipe_abort_read_r], [], [], 
>>> timeout.time_left())
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
>>> "/home/weewx/bin/weewxd", line 260, in sigTERMhandler
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
>>> raise Terminate
>>>
>>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
>>> Terminate
>>>
>>> May 18 22:59:40 raspberrypi weewx[1610]: Stopping weewx weather system: 
>>> weewx.
>>>
>>> May 18 22:59:40 raspberrypi systemd[1]: weewx.service: Succeeded.
>>>
>>> May 18 22:59:40 raspberrypi systemd[1]: Stopped LSB: weewx weather 
>>> system.
>>>
>>>
>>> Greetings
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/999fcc86-f8f8-410c-bd65-8de8bca95a90n%40googlegroups.com.

Re: [weewx-user] want to use lux value to calculate value for 'radiation'

[Greg Troxel]

Eric K  writes:

> Yeah, I agree conversion is not the best way to obtain the solar radiation 
> value. 
> Lux is all Acurite provides us.
>
> I found several places where the sunlight-specific conversion value of of 
> 1/126.7 (or 0.00789) was referenced, so I went with that.
> https://help.ambientweather.net/help/why-is-the-lux-to-w-m-2-conversion-factor-126-7
> https://cumulus.hosiene.co.uk/viewtopic.php?t=3979

I added those links to the wiki page.

Agreed that for bright full sun conversions based on an assumed spectral
distribution are not ridiculous.

It would be really interesting if someone with both kinds of sensors
(both high quality!) were to post a scatter plot of one vs the other.
I expect good agreement about 500 W/m^2, and much less by the time one
gets to 100 W/m^2.   But I am just guessing.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/rmiy2cbis6a.fsf%40s1.lexort.com.


signature.asc
Description: PGP signature

Re: [weewx-user] want to use lux value to calculate value for 'radiation'

[Eric K]

Yeah, I agree conversion is not the best way to obtain the solar radiation 
value. 
Lux is all Acurite provides us.

I found several places where the sunlight-specific conversion value of of 
1/126.7 (or 0.00789) was referenced, so I went with that.
https://help.ambientweather.net/help/why-is-the-lux-to-w-m-2-conversion-factor-126-7
https://cumulus.hosiene.co.uk/viewtopic.php?t=3979



On Tuesday, May 18, 2021 at 5:04:08 PM UTC-5 Greg Troxel wrote:

>
> Eric K  writes:
>
> > The Acurite Atlas weather sensor provides a UV and a lux value, but not 
> a 
> > radiation value.
> > I want to use this formula to calculate solar radiation from the lux 
> sensor 
> > in the Acurite Atlas: radiation = lux * 0.0079
>
> See also
>
> https://github.com/weewx/weewx/wiki/Watts-and-lux
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/77cc35c9-7a13-4fff-8194-c0b11c48ca76n%40googlegroups.com.

Re: [weewx-user] want to use lux value to calculate value for 'radiation'

[Greg Troxel]

Eric K  writes:

> The Acurite Atlas weather sensor provides a UV and a lux value, but not a 
> radiation value.
> I want to use this formula to calculate solar radiation from the lux sensor 
> in the Acurite Atlas:  radiation = lux * 0.0079

See also

https://github.com/weewx/weewx/wiki/Watts-and-lux

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/rmi35ujk8by.fsf%40s1.lexort.com.


signature.asc
Description: PGP signature

[weewx-user] Re: Error by stopping Weewx

[Mauro De Lauretis]

Hi Gary, thank you for answer

So the Traceback I get it's normal and not an error?

Greetings


Il giorno martedì 18 maggio 2021 alle 23:33:22 UTC+2 gjr80 ha scritto:

> Normal operation. You (or something) told WeeWX to shutdown. WeeWX did as 
> it was told and you received a lot of debug output in the log since you 
> have debug > 0. It can be safely ignored in this case. If it troubles you 
> set debug = 0.
>
> If there was an error or some other problem the tone/wording of the log 
> entries would be different.
>
> Gary
>
> On Wednesday, 19 May 2021 at 07:17:38 UTC+10 Mauro De Lauretis wrote:
>
>> Hi
>>
>> Could somebody explain me what this error means by stopping Weewx?
>>
>> May 18 22:59:40 raspberrypi systemd[1]: Stopping LSB: weewx weather 
>> system...
>>
>> May 18 22:59:40 raspberrypi weewx[1427] INFO __main__: Received signal 
>> TERM (15).
>>
>> May 18 22:59:40 raspberrypi weewx[1427] INFO weewx.engine: Main loop 
>> exiting. Shutting engine down.
>>
>> May 18 22:59:40 raspberrypi weewx[1427] INFO weewx.engine: Shutting down 
>> StdReport thread
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG weewx.engine: StdReport 
>> thread has been terminated
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG weewx.restx: Shut down 
>> PWSWeather thread.
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG weewx.restx: Shut down 
>> Wunderground-PWS thread.
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG weewx.restx: Shut down 
>> StationRegistry thread.
>>
>> May 18 22:59:40 raspberrypi weewx[1427] INFO __main__: Terminating weewx 
>> version 4.5.1
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
>> Traceback (most recent call last):
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
>> "/home/weewx/bin/weewxd", line 157, in main
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
>> engine.run()
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
>> "/home/weewx/bin/weewx/engine.py", line 208, in run
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   for 
>> packet in self.console.genLoopPackets():
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
>> "/home/weewx/bin/weewx/drivers/vantage.py", line 534, in genLoopPackets
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   for 
>> _loop_packet in self.genDavisLoopPackets(200):
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
>> "/home/weewx/bin/weewx/drivers/vantage.py", line 561, in genDavisLoopPackets
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
>> loop_packet = self._get_packet()
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
>> "/home/weewx/bin/weewx/drivers/vantage.py", line 574, in _get_packet
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
>> _buffer = self.port.read(99)
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
>> "/home/weewx/bin/weewx/drivers/vantage.py", line 280, in read
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
>> _buffer = self.serial_port.read(chars)
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
>> "/usr/lib/python3/dist-packages/serial/serialposix.py", line 483, in read
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
>> ready, _, _ = select.select([self.fd, self.pipe_abort_read_r], [], [], 
>> timeout.time_left())
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
>> "/home/weewx/bin/weewxd", line 260, in sigTERMhandler
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
>> raise Terminate
>>
>> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
>> Terminate
>>
>> May 18 22:59:40 raspberrypi weewx[1610]: Stopping weewx weather system: 
>> weewx.
>>
>> May 18 22:59:40 raspberrypi systemd[1]: weewx.service: Succeeded.
>>
>> May 18 22:59:40 raspberrypi systemd[1]: Stopped LSB: weewx weather system.
>>
>>
>> Greetings
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/0e1aa293-7464-4c43-8131-68b3b4ff13f2n%40googlegroups.com.

Re: [weewx-user] want to use lux value to calculate value for 'radiation'

[Eric K]

That worked well.  Thanks!
[image: calculated radiation value.JPG]

On Tuesday, May 18, 2021 at 2:58:31 PM UTC-5 lang@googlemail.com wrote:

> in the [StdCalibrate] [[Corrections]] stanza in weewx.conf add the line
>
> radiation = luminosity/126.7 if luminosity is not None else None
>
> Then the calculated value will be stored as radiation in the database and 
> you can use it in your reports/skins
>
> On 18.05.2021 21:10, Eric K wrote:
>
> The Acurite Atlas weather sensor provides a UV and a lux value, but not a 
> radiation value.
> I want to use this formula to calculate solar radiation from the lux 
> sensor in the Acurite Atlas:  radiation = lux * 0.0079
>
> I've been searching the weewx documentation for details and examples of 
> how to create a data value from a calculation.  This calculated data will 
> then go into the weewx database, and graphs in the weewx web page.
>
> It looks like the StdWXCalculate section of the weewx.conf file is the 
> place to do this?
> Is that correct?
> https://weewx.com/docs/usersguide.htm#StdWXCalculate
>
> I've been looking for an example of the StdWXCalculate section showing how 
> a user-created formula is included, and I have not found one.
>
> Can someone show an example of including a user-created formula?
>
> Help appreciated.
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to weewx-user+...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/weewx-user/574d19fd-304c-44d9-b73a-68d203e72a82n%40googlegroups.com
>  
> 
> .
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/1fca24cc-82e4-40dc-b835-3a9b22c240d9n%40googlegroups.com.

[weewx-user] Re: Error by stopping Weewx

[gjr80]

Normal operation. You (or something) told WeeWX to shutdown. WeeWX did as 
it was told and you received a lot of debug output in the log since you 
have debug > 0. It can be safely ignored in this case. If it troubles you 
set debug = 0.

If there was an error or some other problem the tone/wording of the log 
entries would be different.

Gary

On Wednesday, 19 May 2021 at 07:17:38 UTC+10 Mauro De Lauretis wrote:

> Hi
>
> Could somebody explain me what this error means by stopping Weewx?
>
> May 18 22:59:40 raspberrypi systemd[1]: Stopping LSB: weewx weather 
> system...
>
> May 18 22:59:40 raspberrypi weewx[1427] INFO __main__: Received signal 
> TERM (15).
>
> May 18 22:59:40 raspberrypi weewx[1427] INFO weewx.engine: Main loop 
> exiting. Shutting engine down.
>
> May 18 22:59:40 raspberrypi weewx[1427] INFO weewx.engine: Shutting down 
> StdReport thread
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG weewx.engine: StdReport 
> thread has been terminated
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG weewx.restx: Shut down 
> PWSWeather thread.
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG weewx.restx: Shut down 
> Wunderground-PWS thread.
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG weewx.restx: Shut down 
> StationRegistry thread.
>
> May 18 22:59:40 raspberrypi weewx[1427] INFO __main__: Terminating weewx 
> version 4.5.1
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
> Traceback (most recent call last):
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
> "/home/weewx/bin/weewxd", line 157, in main
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
> engine.run()
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
> "/home/weewx/bin/weewx/engine.py", line 208, in run
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   for 
> packet in self.console.genLoopPackets():
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
> "/home/weewx/bin/weewx/drivers/vantage.py", line 534, in genLoopPackets
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   for 
> _loop_packet in self.genDavisLoopPackets(200):
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
> "/home/weewx/bin/weewx/drivers/vantage.py", line 561, in genDavisLoopPackets
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
> loop_packet = self._get_packet()
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
> "/home/weewx/bin/weewx/drivers/vantage.py", line 574, in _get_packet
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
> _buffer = self.port.read(99)
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
> "/home/weewx/bin/weewx/drivers/vantage.py", line 280, in read
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
> _buffer = self.serial_port.read(chars)
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
> "/usr/lib/python3/dist-packages/serial/serialposix.py", line 483, in read
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
> ready, _, _ = select.select([self.fd, self.pipe_abort_read_r], [], [], 
> timeout.time_left())
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
> "/home/weewx/bin/weewxd", line 260, in sigTERMhandler
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
> raise Terminate
>
> May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   Terminate
>
> May 18 22:59:40 raspberrypi weewx[1610]: Stopping weewx weather system: 
> weewx.
>
> May 18 22:59:40 raspberrypi systemd[1]: weewx.service: Succeeded.
>
> May 18 22:59:40 raspberrypi systemd[1]: Stopped LSB: weewx weather system.
>
>
> Greetings
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/c1e2b79d-404d-4167-b39c-912ae61d7870n%40googlegroups.com.

[weewx-user] Error by stopping Weewx

[Mauro De Lauretis]

Hi

Could somebody explain me what this error means by stopping Weewx?

May 18 22:59:40 raspberrypi systemd[1]: Stopping LSB: weewx weather 
system...

May 18 22:59:40 raspberrypi weewx[1427] INFO __main__: Received signal TERM 
(15).

May 18 22:59:40 raspberrypi weewx[1427] INFO weewx.engine: Main loop 
exiting. Shutting engine down.

May 18 22:59:40 raspberrypi weewx[1427] INFO weewx.engine: Shutting down 
StdReport thread

May 18 22:59:40 raspberrypi weewx[1427] DEBUG weewx.engine: StdReport 
thread has been terminated

May 18 22:59:40 raspberrypi weewx[1427] DEBUG weewx.restx: Shut down 
PWSWeather thread.

May 18 22:59:40 raspberrypi weewx[1427] DEBUG weewx.restx: Shut down 
Wunderground-PWS thread.

May 18 22:59:40 raspberrypi weewx[1427] DEBUG weewx.restx: Shut down 
StationRegistry thread.

May 18 22:59:40 raspberrypi weewx[1427] INFO __main__: Terminating weewx 
version 4.5.1

May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   Traceback 
(most recent call last):

May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
"/home/weewx/bin/weewxd", line 157, in main

May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
engine.run()

May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
"/home/weewx/bin/weewx/engine.py", line 208, in run

May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   for 
packet in self.console.genLoopPackets():

May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
"/home/weewx/bin/weewx/drivers/vantage.py", line 534, in genLoopPackets

May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   for 
_loop_packet in self.genDavisLoopPackets(200):

May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
"/home/weewx/bin/weewx/drivers/vantage.py", line 561, in genDavisLoopPackets

May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
loop_packet = self._get_packet()

May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
"/home/weewx/bin/weewx/drivers/vantage.py", line 574, in _get_packet

May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
_buffer = self.port.read(99)

May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
"/home/weewx/bin/weewx/drivers/vantage.py", line 280, in read

May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
_buffer = self.serial_port.read(chars)

May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
"/usr/lib/python3/dist-packages/serial/serialposix.py", line 483, in read

May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   
ready, _, _ = select.select([self.fd, self.pipe_abort_read_r], [], [], 
timeout.time_left())

May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__: File 
"/home/weewx/bin/weewxd", line 260, in sigTERMhandler

May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   raise 
Terminate

May 18 22:59:40 raspberrypi weewx[1427] DEBUG __main__:   Terminate

May 18 22:59:40 raspberrypi weewx[1610]: Stopping weewx weather system: 
weewx.

May 18 22:59:40 raspberrypi systemd[1]: weewx.service: Succeeded.

May 18 22:59:40 raspberrypi systemd[1]: Stopped LSB: weewx weather system.


Greetings

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/d43b57f7-7212-4ca1-b430-7ea493eed086n%40googlegroups.com.

Re: [weewx-user] want to use lux value to calculate value for 'radiation'

['Rainer Lang' via weewx-user]

in the [StdCalibrate] [[Corrections]] stanza in weewx.conf add the line

radiation = luminosity/126.7 if luminosity is not None else None

Then the calculated value will be stored as radiation in the database 
and you can use it in your reports/skins


On 18.05.2021 21:10, Eric K wrote:
The Acurite Atlas weather sensor provides a UV and a lux value, but 
not a radiation value.
I want to use this formula to calculate solar radiation from the lux 
sensor in the Acurite Atlas:  radiation = lux * 0.0079


I've been searching the weewx documentation for details and examples 
of how to create a data value from a calculation. This calculated 
data will then go into the weewx database, and graphs in the weewx 
web page.


It looks like the StdWXCalculate section of the weewx.conf file is 
the place to do this?

Is that correct?
https://weewx.com/docs/usersguide.htm#StdWXCalculate

I've been looking for an example of the StdWXCalculate section 
showing how a user-created formula is included, and I have not found one.


Can someone show an example of including a user-created formula?

Help appreciated.
--
You received this message because you are subscribed to the Google 
Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, 
send an email to weewx-user+unsubscr...@googlegroups.com 
.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/574d19fd-304c-44d9-b73a-68d203e72a82n%40googlegroups.com 
.


--
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/e6f638a6-a14e-8fde-63d6-9936b15b4ca3%40gmail.com.

[weewx-user] Wrong rain values in weewx from WS EFWS2900

[dohna...@gmail.com]

Hi.
I have a problem with wrong rain values show in weewx and in web interface 
(ecowitt.net) of my WS EFWS 2900 

.
Rain for last few days (ecowitt X weewx values):
13/5 - 35,6 X 23,4 mm
14/5 - 13,2 X 3,4 mm
16/5 - 11,9 X 5,6 mm
17/5 - 3,3 X 2,5 mm
I know, that ecowitt values  
are correct, because are same as on display of my WS.

I absolutely dont understand, why the different is every day different. I 
think, its not the problem of wrong unit. Weirnd is, that weewx values are 
still smaller then real values.

Please, can you help me, where should be a problem?

Here is my skin.conf (using belchertown skin):
https://justpaste.it/8hi7a

graphs.conf
https://justpaste.it/2ds1z

and weewx.conf
https://justpaste.it/205zp

and small piece of my weewx.log
https://justpaste.it/4ht9v

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/f03aa8dc-152a-4a93-bedf-03428c35b7fdn%40googlegroups.com.

[weewx-user] want to use lux value to calculate value for 'radiation'

[Eric K]

The Acurite Atlas weather sensor provides a UV and a lux value, but not a 
radiation value.
I want to use this formula to calculate solar radiation from the lux sensor 
in the Acurite Atlas:  radiation = lux * 0.0079

I've been searching the weewx documentation for details and examples of how 
to create a data value from a calculation.  This calculated data will then 
go into the weewx database, and graphs in the weewx web page.

It looks like the StdWXCalculate section of the weewx.conf file is the 
place to do this?
Is that correct?
https://weewx.com/docs/usersguide.htm#StdWXCalculate

I've been looking for an example of the StdWXCalculate section showing how 
a user-created formula is included, and I have not found one.

Can someone show an example of including a user-created formula?

Help appreciated.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/574d19fd-304c-44d9-b73a-68d203e72a82n%40googlegroups.com.

Re: [weewx-user] Re: weewx with an arduino

[Ty]

okay, I'll try that out. thank you!

On Tuesday, May 18, 2021 at 7:17:30 AM UTC-4 Greg Troxel wrote:

>
> Ty  writes:
>
> > The way I have it set up is all of the sensors are connected on a 
> sparkfun 
> > board on my arduino, and then the pi is powering the arduino. I'm just 
> > sending the data from the arduino straight to the pi with a usb 
> connection 
> > and outputting it into a .csv
> >
> > I don't think using MQTT would be necessary. Maybe I should have 
> described 
> > my setup a little more clearly.
>
> Basically you have to do some combination of putting your data into a
> form that can be ingested by an existing driver, or creating a driver
> that will ingest the data in some other form.
>
> I too am in the "MQTT is the right answer". You can easily run a broker
> on the Pi, or you can run it on whatever machine you are going to run
> weewx on. Then you can use MQTTSubscribe which I am 95%+ sure supports
> being a driver (rather than a service).
>
> Probably you want to put json with everything from the csv into a topic,
> but you may just want separate topics. Read the MQTTSubscribe info to
> figure out what it wants and write the data in that format.
>
> Also, once you have MQTT, you may want to do home automation or
> something else, and then that will be able to read weather information.
>
> Overall, I think the fastest path to success, with you writing the least
> code, where success means things are 100% reliable, is writing the
> sensors into MQTT and using MQTTSubscribe. At least that's what I
> would do.
>
> I have a bunch of ESP8266 with sensors all sending data in MQTT, read by
> Home Assistant. weewx uses the Davis driver and then publishes every
> archive interval to MQTT. So in weewx I just see weather, and in Home
> Assistant I see weather and various indoor temps, battery voltage, etc.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/a778ebe4-929e-448d-baeb-f21b64322314n%40googlegroups.com.

[weewx-user] Re: Cloud Base

[ginfo...@gmail.com]

I solved it with the command:

sudo /home/weewx/bin/wee_database --add-column=cloudbase

Thanks again
Il giorno giovedì 6 maggio 2021 alle 13:31:25 UTC+2 ginfo...@gmail.com ha 
scritto:

> Thanks Gary
>
> Il giorno giovedì 6 maggio 2021 alle 13:26:36 UTC+2 gjr80 ha scritto:
>
>> Hi,
>>
>> It is still not clear what you are asking. Are you wanting WeeWX to 
>> estimate cloud base ? If so 
>> then WeeWX should already be calculating cloud base (stored in WeeWX field 
>> ‘cloudbase’). You can verify this by stopping WeeWX and running WeeWX 
>> directly , this 
>> will show the contents of loop packets and archive records on the console. 
>> Does cloudbase appear? If it does and your database is using the 
>> wview_extended schema then cloudbase should be automatically saved to 
>> database. If you want to display cloudbase on your NeoWX page(s) I suggest 
>> you contact the NeoWX author.
>>
>> If you want to do something else entirely I suggest you post your 
>> question in detail in your native language and I am sure someone will work 
>> out what you are after.
>>
>> Gary
>>
>> On Thursday, 6 May 2021 at 21:02:20 UTC+10 ginfo...@gmail.com wrote:
>>
>>>
>>> Thanks for the reply.
>>> I installed weewx from scratch to get the new database.
>>> I use the neowx skin and my site is:
>>> www.meteomestre.it
>>>
>>> However, I cannot see the label of the basic Cloud
>>>
>>> Thanks again
>>> Il giorno giovedì 6 maggio 2021 alle 12:13:59 UTC+2 kk44...@gmail.com 
>>> ha scritto:
>>>
 I guess it is too little information you gave for someone to help.

 ginfo...@gmail.com schrieb am Donnerstag, 6. Mai 2021 um 10:48:11 
 UTC+2:

> I’m not solved…help me please?
>
> Il giorno venerdì 2 aprile 2021 alle 10:29:38 UTC+2 ginfo...@gmail.com 
> ha scritto:
>
>> Any ideas?
>> Thanks
>>
>> Il giorno martedì 30 marzo 2021 alle 18:38:31 UTC+2 
>> ginfo...@gmail.com ha scritto:
>>
>>> Good morning.
>>> I cannot see the Cloud Base detection on my site, I was told that I 
>>> need to update the weewx.conf file
>>> How should I do?
>>> Thanks and good luck to all
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/8cc3363f-0607-4142-9987-123306ff6249n%40googlegroups.com.

Re: [weewx-user] Best air quality sensor for weewx Air-Q

[Karen K]

I do not know for sure by now. I plan to purchase one, but I think, it 
would be possible using weewx-MQTTsubscribe.

weatherl...@gmail.com schrieb am Dienstag, 18. Mai 2021 um 18:01:22 UTC+2:

> Karen,
>
> Can WeeWx collect the output of the air-Q units directly via an API?
>
> On 23 Apr, 2021, at 05:36, Karen K  wrote:
>
> airQ 
>
> xsli...@gmail.com schrieb am Freitag, 23. April 2021 um 08:04:22 UTC+2:
>
>> Hello,
>>
>> I'd like to ask those who already use some air quality sensors connected 
>> with weewx what is the best option these days. When I check commercial 
>> weather webs I usually see values PM2.5, PM10, CO, O3, SO2, NO2. Do we have 
>> some all-in-box solution for these values already? Or it's necessary to 
>> build it from modules? I saw Arduino has many modules which can be plugged 
>> but not sure if I have enough time to play with that :)
>>
>> Thanks for hints
>>
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to weewx-user+...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/weewx-user/cb37ed53-23e0-40a2-9ce5-29d8e1e3ce7dn%40googlegroups.com
>  
> 
> .
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/f6e70ec1-d3f0-4aa0-89e3-756faf57e004n%40googlegroups.com.

Re: [weewx-user] Re: Volunteer translators needed!

[Vetti52]

I did some tracing back. Now I think, that the history report stanza in 
skin.conf was introduced by the alltime module. Not sure yet. The beaufort 
texts might be a result of a copy/paste action from a source, I found 
somewhere here in the forum, ages ago
BTW, in index.html.tmpl, where the history report belongs to, the part  needs translations also, which seem not 
to be covered by the en.conf file. But maybe, this was another place, where 
the alltime module introduced some text.
Somewhen I started to translate everything into German, that I found to be 
presented as text on the web site. I found it in weewx.conf, 
index.html.tmpl,  skin.conf, all forecast and alltime related files. I did 
not look at where these labels came from in original. Anyway, now I know 
about them, in case updates will mess up with my translations. 

But you have a good source for your de.conf file already. So there is no 
need that I contribute that part.
tke...@gmail.com schrieb am Dienstag, 18. Mai 2021 um 16:48:02 UTC+2:

> Thanks.
>
> Where does [HistoryReport] come from? It's not part of anything in WeeWX 
> that I can tell.
>
> Same with the Beaufort texts.
>
> And, I agree, converting a skin is a right pain. 
>
> On Tue, May 18, 2021 at 7:38 AM Vetti52  wrote:
>
>> I found an entry in skin.conf missing in en.conf:
>> For German:
>> [HistoryReport]
>> monthnames = Jan, Feb, Mar, Apr, Mai, Jun, Jul, Aug, Sep, Okt, Nov, 
>> Dez
>>
>> and some translations for Beaufort as text version would also be helpful. 
>> Here is my german version, used in current.inc:
>> #if $varExists('day.windSpeed') and $current.windSpeed.raw is not None
>>   #if $current.windSpeed.beaufort.raw == 0
>> #set $word_current_beaufort = 'Windstille'
>>   #elif $current.windSpeed.beaufort.raw == 1
>> #set $word_current_beaufort = 'Leiser Zug'
>>   #elif $current.windSpeed.beaufort.raw  == 2
>> #set $word_current_beaufort = 'Leichte Brise'
>>   #elif $current.windSpeed.beaufort.raw == 3
>> #set $word_current_beaufort = 'Schwache Brise'
>>   #elif $current.windSpeed.beaufort.raw == 4
>> #set $word_current_beaufort = 'Mäßige Brise'
>>   #elif $current.windSpeed.beaufort.raw == 5
>> #set $word_current_beaufort = 'Frische Brise'
>>   #elif $current.windSpeed.beaufort.raw == 6
>> #set $word_current_beaufort = 'Starker Wind'
>>   #elif $current.windSpeed.beaufort.raw == 7
>> #set $word_current_beaufort = 'Steifer Wind'
>>   #elif $current.windSpeed.beaufort.raw == 8
>> #set $word_current_beaufort = 'Stürmischer Wind'
>>   #elif $current.windSpeed.beaufort.raw == 9
>> #set $word_current_beaufort = 'Sturm'
>>   #elif $current.windSpeed.beaufort.raw == 10
>> #set $word_current_beaufort = 'Schwerer Sturm'
>>   #elif $current.windSpeed.beaufort.raw == 11
>> #set $word_current_beaufort = 'Orkanartiger Sturm'
>>   #elif $current.windSpeed.beaufort.raw == 12
>> #set $word_current_beaufort = 'Orkan'
>>   #else
>> #set $word_current_beaufort = 'N/A'
>>   #end if
>>
>> And, well, the modules, I have in use, alltime seasons and forecast, 
>> which have their own extra labelling text built in, are always a pain to 
>> keep them uptodate with seasons skin. Adopting all kind of those modules to 
>> the new version might be laborious and take some time. Sigh...
>>
>>
>>
>> tke...@gmail.com schrieb am Sonntag, 16. Mai 2021 um 03:16:15 UTC+2:
>>
>>> Thank you for the Greek translations!
>>>
>>> While it would be nice, maintaining native language instructions is way 
>>> beyond the capabilities of this all-volunteer project!
>>>
>>> On Sat, May 15, 2021 at 3:03 PM Δημήτρης Βήχος  
>>> wrote:
>>>
 i think greek users , need greek instructions  , german users need 
 german instructions etc. with this thought , my instructions in github 
 are in greek. 
 however this is my greek translate in en.conf . 

 Στις Σάββατο, 15 Μαΐου 2021 στις 11:10:16 μ.μ. UTC+3, ο χρήστης 
 kk44...@gmail.com έγραψε:

> hobbyl...@gmail.com schrieb am Samstag, 15. Mai 2021 um 21:41:09 
> UTC+2:
>
>> i have a little repository on github with greek translate of all 
>> pages of seasons skin and weewx.conf. you can use it as you need!!
>> greek translate of weewx 
>> 
>>
>
> What we ask people for is to translate the file en.conf attached to 
> the initial post. Could you think to do that? 
>
> I guess it would be no good idea if we try to pull the greek words out 
> of your repository without knowing anything about the greek language. 
> That 
> would not work.
>  
>
 -- 
 You received this message because you are subscribed to the Google 
 Groups "weewx-user" group.
 To unsubscribe from this group and stop receiving emails from it, send 
 an email to weewx-user+...@googlegroups.com.
 To view this discussion on the web visit 
 https:

Re: [weewx-user] Best air quality sensor for weewx Air-Q

[weather list]

Karen,

Can WeeWx collect the output of the air-Q units directly via an API?

> On 23 Apr, 2021, at 05:36, Karen K  > wrote:
> 
> airQ 
> 
> xsli...@gmail.com  schrieb am Freitag, 23. April 2021 um 
> 08:04:22 UTC+2:
> Hello,
> 
> I'd like to ask those who already use some air quality sensors connected with 
> weewx what is the best option these days. When I check commercial weather 
> webs I usually see values PM2.5, PM10, CO, O3, SO2, NO2. Do we have some 
> all-in-box solution for these values already? Or it's necessary to build it 
> from modules? I saw Arduino has many modules which can be plugged but not 
> sure if I have enough time to play with that :)
> 
> Thanks for hints
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to weewx-user+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/weewx-user/cb37ed53-23e0-40a2-9ce5-29d8e1e3ce7dn%40googlegroups.com
>  
> .

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/5A9AC8C0-5166-41BD-B0D3-BD82C2953F0B%40gmail.com.

[weewx-user] Re: Belchertown - MQTT with webhosting

[Karen K]

I found those sources:
Jterrettaz / sunduration  - that 
version with the complicated formula
brewster76 / util-archer 
 
- 
a quite too simple solution

@Manfred Maier: Would you mind me including your formula into weewx-GTS 
, where sun energy is already included?

Manfred Maier schrieb am Mittwoch, 10. März 2021 um 20:44:02 UTC+1:

> I'm using the attached file, which I found somewhere here in this user 
> forum. 
> I've slightly adapted it to bette fit my needs. 
>
> Don't get confused by the filed name 'EmptyReal'. That was just a spare 
> field I had in my database.
>
> The calculation of the theoretical radiation level is not 100% perfect, 
> but it does the job.
>
>
> grua...@gmail.com schrieb am Mittwoch, 10. März 2021 um 20:05:55 UTC+1:
>
>> ok, i will try it locally before, but vserver is also a good (cheap) 
>> option :-)
>>
>> another question to you: how do you calculate sun hours on your site, is 
>> it from here? https://github.com/gjr80/weewx-weewx-wd
>>
>> Manfred Maier schrieb am Mittwoch, 10. März 2021 um 19:23:40 UTC+1:
>>
>>> No, I didn't.
>>>
>>> I'm (unfortunately) sitting behind fiberglass without a static IPv4. 
>>> So I anyway had to rent a vServer for running my own tunneling solution 
>>> for my local webcam.
>>>
>>> grua...@gmail.com schrieb am Mittwoch, 10. März 2021 um 19:12:12 UTC+1:
>>>
 hi manfred,

 did you try to run the broker locally before? 

 i have a static ip with symmetric bandwidth. or are there other reasons 
 why it doesnt work?

 regards,
 chris

 Manfred Maier schrieb am Mittwoch, 10. März 2021 um 15:16:35 UTC+1:

> Hi Chris,
> I've been in a similar situation to you.
> My web hosting service didn't allow me to run a MQTT broker and the 
> (free) public brokers didn't perform very well. The majority of MQTT 
> packages got lost and were not delivered to the web client.
> So in the end I've decided to rent an additional vServer and run my 
> own MQTT broker. The setup was really easy, but there's a server cost of 
> approx. 2€ per month.
>
> Manfred  
>
> kk44...@gmail.com schrieb am Mittwoch, 10. März 2021 um 11:59:33 
> UTC+1:
>
>> You need a publicly available MQTT broker. Either you install one on 
>> your webhoster's webspace (if possible), or you use a public broker like 
>> test.mosquitto.org.
>>
>> grua...@gmail.com schrieb am Mittwoch, 10. März 2021 um 07:46:52 
>> UTC+1:
>>
>>> hello,
>>>
>>> i am uploading the reports via FTP to my webhoster. can i use mqtt 
>>> then for live data oder do i need a locally webserver?
>>>
>>> regards,
>>> chris
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/45abfa01-3541-412a-bd62-2973df863289n%40googlegroups.com.

Re: [weewx-user] Re: Volunteer translators needed!

[Tom Keffer]

Thanks.

Where does [HistoryReport] come from? It's not part of anything in WeeWX
that I can tell.

Same with the Beaufort texts.

And, I agree, converting a skin is a right pain.

On Tue, May 18, 2021 at 7:38 AM Vetti52  wrote:

> I found an entry in skin.conf missing in en.conf:
> For German:
> [HistoryReport]
> monthnames = Jan, Feb, Mar, Apr, Mai, Jun, Jul, Aug, Sep, Okt, Nov, Dez
>
> and some translations for Beaufort as text version would also be helpful.
> Here is my german version, used in current.inc:
> #if $varExists('day.windSpeed') and $current.windSpeed.raw is not None
>   #if $current.windSpeed.beaufort.raw == 0
> #set $word_current_beaufort = 'Windstille'
>   #elif $current.windSpeed.beaufort.raw == 1
> #set $word_current_beaufort = 'Leiser Zug'
>   #elif $current.windSpeed.beaufort.raw  == 2
> #set $word_current_beaufort = 'Leichte Brise'
>   #elif $current.windSpeed.beaufort.raw == 3
> #set $word_current_beaufort = 'Schwache Brise'
>   #elif $current.windSpeed.beaufort.raw == 4
> #set $word_current_beaufort = 'Mäßige Brise'
>   #elif $current.windSpeed.beaufort.raw == 5
> #set $word_current_beaufort = 'Frische Brise'
>   #elif $current.windSpeed.beaufort.raw == 6
> #set $word_current_beaufort = 'Starker Wind'
>   #elif $current.windSpeed.beaufort.raw == 7
> #set $word_current_beaufort = 'Steifer Wind'
>   #elif $current.windSpeed.beaufort.raw == 8
> #set $word_current_beaufort = 'Stürmischer Wind'
>   #elif $current.windSpeed.beaufort.raw == 9
> #set $word_current_beaufort = 'Sturm'
>   #elif $current.windSpeed.beaufort.raw == 10
> #set $word_current_beaufort = 'Schwerer Sturm'
>   #elif $current.windSpeed.beaufort.raw == 11
> #set $word_current_beaufort = 'Orkanartiger Sturm'
>   #elif $current.windSpeed.beaufort.raw == 12
> #set $word_current_beaufort = 'Orkan'
>   #else
> #set $word_current_beaufort = 'N/A'
>   #end if
>
> And, well, the modules, I have in use, alltime seasons and forecast,
> which have their own extra labelling text built in, are always a pain to
> keep them uptodate with seasons skin. Adopting all kind of those modules to
> the new version might be laborious and take some time. Sigh...
>
>
>
> tke...@gmail.com schrieb am Sonntag, 16. Mai 2021 um 03:16:15 UTC+2:
>
>> Thank you for the Greek translations!
>>
>> While it would be nice, maintaining native language instructions is way
>> beyond the capabilities of this all-volunteer project!
>>
>> On Sat, May 15, 2021 at 3:03 PM Δημήτρης Βήχος 
>> wrote:
>>
>>> i think greek users , need greek instructions  , german users need
>>> german instructions etc. with this thought , my instructions in github
>>> are in greek.
>>> however this is my greek translate in en.conf .
>>>
>>> Στις Σάββατο, 15 Μαΐου 2021 στις 11:10:16 μ.μ. UTC+3, ο χρήστης
>>> kk44...@gmail.com έγραψε:
>>>
 hobbyl...@gmail.com schrieb am Samstag, 15. Mai 2021 um 21:41:09 UTC+2:

> i have a little repository on github with greek translate of all pages
> of seasons skin and weewx.conf. you can use it as you need!!
> greek translate of weewx
> 
>

 What we ask people for is to translate the file en.conf attached to
 the initial post. Could you think to do that?

 I guess it would be no good idea if we try to pull the greek words out
 of your repository without knowing anything about the greek language. That
 would not work.


>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to weewx-user+...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-user/39fe8ab8-ac89-4629-8176-ea0eba4f3595n%40googlegroups.com
>>> 
>>> .
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/8d480e6b-722e-4aaf-a150-839b57598eccn%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAPq0zEAdsYAHVgATDY8VmmfanBv12%3DvfYtcZ%2BLi5fZi3OoGXjQ%40mail.gmail.com.

Re: [weewx-user] Re: Volunteer translators needed!

[Vetti52]

I found an entry in skin.conf missing in en.conf:
For German:
[HistoryReport]
monthnames = Jan, Feb, Mar, Apr, Mai, Jun, Jul, Aug, Sep, Okt, Nov, Dez

and some translations for Beaufort as text version would also be helpful. 
Here is my german version, used in current.inc:
#if $varExists('day.windSpeed') and $current.windSpeed.raw is not None
  #if $current.windSpeed.beaufort.raw == 0
#set $word_current_beaufort = 'Windstille'
  #elif $current.windSpeed.beaufort.raw == 1
#set $word_current_beaufort = 'Leiser Zug'
  #elif $current.windSpeed.beaufort.raw  == 2
#set $word_current_beaufort = 'Leichte Brise'
  #elif $current.windSpeed.beaufort.raw == 3
#set $word_current_beaufort = 'Schwache Brise'
  #elif $current.windSpeed.beaufort.raw == 4
#set $word_current_beaufort = 'Mäßige Brise'
  #elif $current.windSpeed.beaufort.raw == 5
#set $word_current_beaufort = 'Frische Brise'
  #elif $current.windSpeed.beaufort.raw == 6
#set $word_current_beaufort = 'Starker Wind'
  #elif $current.windSpeed.beaufort.raw == 7
#set $word_current_beaufort = 'Steifer Wind'
  #elif $current.windSpeed.beaufort.raw == 8
#set $word_current_beaufort = 'Stürmischer Wind'
  #elif $current.windSpeed.beaufort.raw == 9
#set $word_current_beaufort = 'Sturm'
  #elif $current.windSpeed.beaufort.raw == 10
#set $word_current_beaufort = 'Schwerer Sturm'
  #elif $current.windSpeed.beaufort.raw == 11
#set $word_current_beaufort = 'Orkanartiger Sturm'
  #elif $current.windSpeed.beaufort.raw == 12
#set $word_current_beaufort = 'Orkan'
  #else
#set $word_current_beaufort = 'N/A'
  #end if

And, well, the modules, I have in use, alltime seasons and forecast, which 
have their own extra labelling text built in, are always a pain to keep 
them uptodate with seasons skin. Adopting all kind of those modules to the 
new version might be laborious and take some time. Sigh...



tke...@gmail.com schrieb am Sonntag, 16. Mai 2021 um 03:16:15 UTC+2:

> Thank you for the Greek translations!
>
> While it would be nice, maintaining native language instructions is way 
> beyond the capabilities of this all-volunteer project!
>
> On Sat, May 15, 2021 at 3:03 PM Δημήτρης Βήχος  
> wrote:
>
>> i think greek users , need greek instructions  , german users need german 
>> instructions etc. with this thought , my instructions in github are in 
>> greek. 
>> however this is my greek translate in en.conf . 
>>
>> Στις Σάββατο, 15 Μαΐου 2021 στις 11:10:16 μ.μ. UTC+3, ο χρήστης 
>> kk44...@gmail.com έγραψε:
>>
>>> hobbyl...@gmail.com schrieb am Samstag, 15. Mai 2021 um 21:41:09 UTC+2:
>>>
 i have a little repository on github with greek translate of all pages 
 of seasons skin and weewx.conf. you can use it as you need!!
 greek translate of weewx 
 

>>>
>>> What we ask people for is to translate the file en.conf attached to the 
>>> initial post. Could you think to do that? 
>>>
>>> I guess it would be no good idea if we try to pull the greek words out 
>>> of your repository without knowing anything about the greek language. That 
>>> would not work.
>>>  
>>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to weewx-user+...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/weewx-user/39fe8ab8-ac89-4629-8176-ea0eba4f3595n%40googlegroups.com
>>  
>> 
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/8d480e6b-722e-4aaf-a150-839b57598eccn%40googlegroups.com.

Re: [weewx-user] YEAR Tab graph dates

[Vetti52]

I just tried this little trick with month_images too and changed it  to 
%d.%m. And, yes, after restarting weewx, it worked! Nice!!! However, 
year_images 
was not changed. There is a little typo in Rick's post, needs to be %y 
instead of y%. But, still no success. So, I had a look into the web site 
files and realized, that the year images are only created at midnight. So I 
will wait until tomorrow to see, what happened.

Rick schrieb am Dienstag, 18. Mai 2021 um 01:28:35 UTC+2:

> Thanks Tom for the explanation.
>
> Found the setting in skins.conf.
> [[year_images]]
> x_label_format = %m/%d<-- changed the %d to y%
>
> [image: yeargraph 2.jpg]
> On Monday, 17 May 2021 at 10:07:31 pm UTC+8 tke...@gmail.com wrote:
>
>> The x-labels represent dates, not months. So, for example, the label 
>> 09/01 is implied 09/01/21.
>>
>> You, of course, are welcome to set them to something else.
>>
>> On Sun, May 16, 2021 at 11:52 PM Rick  wrote:
>>
>>>
>>> Only just noticed that the dates on YEAR Tab graph are wrong.  This is 
>>> on Seasons skin.
>>>
>>> [image: yeargraph.jpg]
>>> Month looks ok but year does not, /01 on the axis.
>>>
>>> Both WeeWX version 4.5.1 &  3.9.2 do this.  I've had a look at other 
>>> users stations and found the same thing, month ok but year not.  Every 
>>> graph same.
>>>
>>> [image: yeargraph satx.jpg]
>>>
>>> What would cause this?
>>>
>>> -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to weewx-user+...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/weewx-user/eed3aac3-ce63-4a41-a906-c1fa53c4cbedn%40googlegroups.com
>>>  
>>> 
>>> .
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/18fc0352-6db0-4557-a050-50c4c7489d23n%40googlegroups.com.

Re: [weewx-user] Re: weewx with an arduino

[Greg Troxel]

Ty  writes:

> The way I have it set up is all of the sensors are connected on a sparkfun 
> board on my arduino, and then the pi is powering the arduino. I'm just 
> sending the data from the arduino straight to the pi with a usb connection 
> and outputting it into a .csv
>
> I don't think using MQTT would be necessary. Maybe I should have described 
> my setup a little more clearly.

Basically you have to do some combination of putting your data into a
form that can be ingested by an existing driver, or creating a driver
that will ingest the data in some other form.

I too am in the "MQTT is the right answer".  You can easily run a broker
on the Pi, or you can run it on whatever machine you are going to run
weewx on.  Then you can use MQTTSubscribe which I am 95%+ sure supports
being a driver (rather than a service).

Probably you want to put json with everything from the csv into a topic,
but you may just want separate topics.  Read the MQTTSubscribe info to
figure out what it wants and write the data in that format.

Also, once you have MQTT, you may want to do home automation or
something else, and then that will be able to read weather information.

Overall, I think the fastest path to success, with you writing the least
code, where success means things are 100% reliable, is writing the
sensors into MQTT and using MQTTSubscribe.   At least that's what I
would do.

I have a bunch of ESP8266 with sensors all sending data in MQTT, read by
Home Assistant.  weewx uses the Davis driver and then publishes every
archive interval to MQTT.   So in weewx I just see weather, and in Home
Assistant I see weather and various indoor temps, battery voltage, etc.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/rmifsykl29m.fsf%40s1.lexort.com.


signature.asc
Description: PGP signature