Dear Roman,
two weeks ago, i try to build common wpa_supplicant into normal linux
OS,
but i failed to build wpa_supplicant。
thank you for your hint, and i will keep working on this topic :-)
On 4月14日, 上午8時42分, Roman roman.baumgaert...@t-mobile.com wrote:
Hi Nail,
Here is an article which
dear Roman,
sorry for i have not explain my question enough, and i will be glade
to explain it again:
my goal is to enable the intel 3945 abg wifi component on our x86
target platform
so my first step is to enable corresponding kernel config and built-in
corresponding firmware
my next step is
Nail,
I don't understand your question. If you are connected you should see with
the command iwconfig to which SSID you are attached to.
It might make sense to send the detail configuration of your supplicant to
find out what is going on. Make sure that you have nowhere a typo in your
I did that but I get a similar error of ehung..
The output:
ioctl[SIOCSIWAUTH]: Operation not supported on transport endpoint.
WEXT auth param 4 value 0x0 - CTRL-EVENT-STATE-CHANGE id=-1 state=2
CTRL-EVENT-SCAN-RESULTS Ready
CTRL-EVENT-STATE-CHANGE id=-1 state=1
And it locks.
I'm running on
Hi, I have enabled wifi using the following command written in
init.rc:
mkdir /data/misc/wifi 0770 wifi wifi
mkdir /data/misc/wifi/sockets 0770 wifi wifi
mkdir /data/system/wpa_supplicant 0770 wifi wifi
mkdir /data/misc/dhcp 0770 dhcp dhcp
chown dhcp dhcp /data/misc/dhcp
Dear Roman
yes, i got IP and can connect to network,
it is because i have configred the wpa_supplicant.conf, and the
contents is shown below:
wpa_supplicant.conf:
===
update_config=1
eapol_version=1
ap_scan=1# ap_scan=1:
I'm getting the following error at the moment:
D/WifiHW ( 2325): Unable to open connection to supplicant on /data/
system/wpa_supplicant/wlan0: No such file or directory
I got wpa_supplicant running.
# ls -l /data/system/wpa_supplicant/
srwxrwx--- root system2009-03-27 11:39
This is the output when starting wpa_supplicant:
Initializing interface 'wlan0' conf '/system/etc/wifi/
wpa_supplicant.conf'
drive
r 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/system/etc/wifi/wpa_supplicant.conf' - '/system/
etc/wifi/
w
pa_supplicant.conf'
Reading
Hi,
Androidphan wrote:
This is the output when starting wpa_supplicant:
Initializing interface 'wlan0' conf '/system/etc/wifi/
wpa_supplicant.conf'
drive
r 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/system/etc/wifi/wpa_supplicant.conf' - '/system/
etc/wifi/
w
My bad,
I forgot to create the directory /data/misc/wifi/sockets
On 27 mrt, 12:49, Androidphan niels.kee...@tass.nl wrote:
# wpa_cli -p/data/system/wpa_supplicant/ scan
Selected interface 'wlan0'
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or
directory
On 27 mrt,
Hi everyone:
I have a question about wpa_supplicant. I hope someone can offer some
suggestion for me.
I have successful load driver and firmware file in android.
But I have problem at wpa_supplicant.
#wpa_supplicant -Dwext -iwlan0 -c/etc/wifi/wpa_supplicant.conf
ioctl[SIOCSIWAUTH]: Operation not
In you supplicant conf file.. try mentioning..
ctrl_interface=DIR=/data/system/wpa_supplicant/ GROUP=system
By default the permission of the socket would be root and the service
running on behalf of system won't b able to access it.
-JJ.
On Mar 16, 1:01 pm, SH kidsjr_...@yahoo.co.jp wrote:
Thank you for your advices .
I've got it solved.
but next error below:
V/WifiStateTracker( 2422): Changing supplicant state: INACTIVE ==
SCANNING
V/WifiMonitor( 2422): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=1]
V/WifiStateTracker( 2422): Changing supplicant state: SCANNING ==
INACTIVE
I am getting the following error.
D/WifiService( 2436): Unable to open connection to supplicant on /
data/system/wpa_supplicant/wlan0 Permisiion Denied.
I would be grateful for your support.
Best regards,
--~--~-~--~~~---~--~~
unsubscribe:
Hi SH
Make sure that all the correct directories is in the right place
(google for /data/misc wifi android)
Search through all the android code and make sure that tiwlan0 is
changed to whatever your wifi device's name is.
That will save you considerable time...
On Mar 16, 10:01 am, SH
I have a similar setup. My wifi shows up as eth1. I tried to follow
your instructions, did not quite work. So I am able to load
wpa_supplicant, can connect to AP, can ping and wget files from web.
My system does not resolve domain names for some reason. What do I
need to have DNS working? But the
Hi, ehung!
sb 1-7.3: Could not load firmware file zd1211/zd1211b_ub. Error number -2
zd1211rw 1-7.3:1.0: couldn't load firmware. Error number -2
error: SIOCSIFFLAGS (No such file or directory)
Please check your firmware file location.
It must be located under /etc/firmware/* (=
Hi vinay:
I had meet a question about wifi in android.
I had suceessful to insmod my wifi driver but the wifi not up yet.
when I typed netcfg wlan0 up, I got the some error.
# ifconfig wlan0 up
firmware: requesting zd1211/zd1211b_ub
init: untracked pid 2425 exited
usb 1-7.3: Could not load
muneesh,
First verify your drivers are getting inserted and you are able to connect
AP with static Ip adress (use wlan_cfg). This is independent of Android and
it should work FIRST.
1. Add HAVE_CUSTOM_WIFI_DRIVER_2 := true to
build/target/board/generic/BoardConfig.mk file.
2. make sure
19 matches
Mail list logo