On Thu, Feb 17, 2011 at 12:12 PM, Poonam2 Gupta
poonam2.gu...@aricent.com wrote:
Hi,
we need to support encrytion and decryption in hardware for Unicast control
packets and Unicast data packets with different keys.
software?
Can this be done with existing development?
Regards
Poonam
On Tue, Feb 15, 2011 at 2:35 PM, Baldomero Coll baldo.at...@gmail.com wrote:
Hello,
Can you please tell me how do you select one o two antennas?
I don't know why you should do that. I guess changing the tx/rx
chainmask will do after it was read from eeprom.
I'm using a similar setting than
On Fri, Feb 11, 2011 at 5:28 PM, Thomas Andrews tandr...@grok.co.za wrote:
Hi,
I have a couple of AR9220 cards running in 'N' mode, but I can't seem to get
either Greenfield or two RX STBC streams going. These are the errors I get in
each case:
Driver does not support configured HT
;
Peizhao
On 04/02/11 15:27, Mohammed Shafi wrote:
On Fri, Feb 4, 2011 at 8:34 AM, Peizhao Hupeizhao.resea...@gmail.com
wrote:
Hi Alex,
I am testing the patch. I got the following dmesg message.
I am using compat-wireless-2011-01-17.tar.bz2 and iw-0.9.21.tar.bz2 with
both patches. The linux
* Manufacturer: Netgear, Inc.
* Model: WNDR3700
* Device name: WNDR3700(Wireless AP)
* Config methods: Ethernet, Label, PBC
On Mon, Feb 7, 2011 at 8:59 PM, Mohammed Shafi shafi.wirel...@gmail.com
wrote:
running out of ideas and I dont have that card too
On Fri, Jan 28, 2011 at 3:48 AM, Steve Brown sbr...@cortland.com wrote:
The variable appears in both in ath_softc and ath_beacon_config.
The struct ath_beacon_config is embedded in ath_softc. The extra
variable was added by commit id 57c4d7b4c4986037be51476b8e3025d5ba18d8b8.
---
---
On Fri, Feb 4, 2011 at 2:55 PM, virtan vir...@virtan.com wrote:
On 04.02.2011, at 8:24, Mohammed Shafi wrote:
On Thu, Feb 3, 2011 at 11:43 PM, virtan vir...@virtan.com wrote:
On Thu, Feb 3, 2011 at 8:29 AM, Mohammed Shafi shafi.wirel...@gmail.com
wrote:
Could not set channel for kernel
On Fri, Feb 4, 2011 at 8:34 AM, Peizhao Hu peizhao.resea...@gmail.com wrote:
Hi Alex,
I am testing the patch. I got the following dmesg message.
I am using compat-wireless-2011-01-17.tar.bz2 and iw-0.9.21.tar.bz2 with
both patches. The linux kernel is 2.6.35 from linux-wireless.
[
On Wed, Feb 2, 2011 at 7:54 PM, Felix Fietkau n...@openwrt.org wrote:
On 2011-02-02 8:01 AM, Nikolay Martynov wrote:
Hi,
I've got a question for you, Ben, if you do not mind.
Can it get stuck without this error message?
The reason I'm asking is that this pair (ath9k-intel5300) has
to
diagnose problem?
By the
2011/2/2 Mohammed Shafi shafi.wirel...@gmail.com:
On Wed, Feb 2, 2011 at 7:54 PM, Felix Fietkau n...@openwrt.org wrote:
On 2011-02-02 8:01 AM, Nikolay Martynov wrote:
Hi,
I've got a question for you, Ben, if you do not mind.
Can it get stuck without this error
On Wed, Feb 2, 2011 at 11:18 AM, Nikolay Martynov mar.ko...@gmail.com wrote:
Hi.
Have ath9k AP and intel 5300 client. AP has latest openwrt, intel5300
has latest linux driver. Network operates in 801.11g mode. When client
uploads to the AP for a long time I get these errors in logs on AP:
On Wed, Feb 2, 2011 at 11:18 AM, Nikolay Martynov mar.ko...@gmail.com wrote:
Hi.
Have ath9k AP and intel 5300 client. AP has latest openwrt, intel5300
has latest linux driver. Network operates in 801.11g mode. When client
uploads to the AP for a long time I get these errors in logs on AP:
Hi
On Thu, Jan 27, 2011 at 3:16 PM, Adrian Chadd adr...@freebsd.org wrote:
Hi,
In ar5008_phy.c:ar5008_hw_init_chain_masks(), some special case
happens for AR5416 v1.0 when the chainmask is configured for two
chains.
As per the reference hw code it's a workaround for that particular
version to
to prevent scanning. You can connect using iwconfig or iw
or
wpa_supplicant which just associate to the AP and these do not
initiate scan automatically.
Vivek.
-Original Message-
From: Mohammed Shafi shafi.at...@gmail.com
To: BC comb...@aol.com
Cc: ath9k-devel ath9k-devel
On Sat, Jan 29, 2011 at 11:30 AM, crocket crockabisc...@gmail.com wrote:
Last time I bought wireless LAN cards, I bought RT3062.
But opensource rt2x00 was and is completely experimental, and the
linux driver from www.ralinktech.com doesn't support AP mode.
I learn a lesson: Linux driver
On Fri, Jan 28, 2011 at 3:48 AM, Steve Brown sbr...@cortland.com wrote:
The variable appears in both in ath_softc and ath_beacon_config.
The struct ath_beacon_config is embedded in ath_softc. The extra
variable was added by commit id 57c4d7b4c4986037be51476b8e3025d5ba18d8b8.
---
---
On Tue, Jan 25, 2011 at 10:44 PM, Mihai Moldovan io...@ionic.de wrote:
Hey all,
are there any PCIe cards with the Atheros AR9380 chipset available?
may be this link might be more helpful
http://www.atheros.com/technology/technology.php?nav1=47product=88
So far, I was just able to find a
On Sat, Jan 22, 2011 at 10:33 PM, Sujith m.suj...@gmail.com wrote:
Mohammed Shafi wrote:
As the Rate Control is handled in firmware the tx rate status is not
reported properly and this is the cause of warning.
To remove this warning we can do(not a fix)
- /* uh huh
On Fri, Jan 21, 2011 at 11:35 PM, Galen gal...@zinkconsulting.com wrote:
A number of mailing list members have expressed interest in AR9003-based
hardware. At this time, I only have a very limited quantity of these cards
on-hand (sample production cards), so I need to hold on to them for my
On Fri, Jan 21, 2011 at 9:47 PM, Jorge Luis jo...@luisnet.com wrote:
On 01/21/2011 03:56 PM, Sujith wrote:
Jorge Luis wrote:
I have applied the patches that Sujith posted last night with the latest
compat drivers and my HTC now works without issues.
I have also loaded it with 6 more
On Thu, Jan 20, 2011 at 1:17 AM, Geoffrey Challen chal...@buffalo.edu wrote:
I am trying to collect accurate power measurements for a D-Link DWA-556
802.11gn card supported by the ath9k driver.
Numbers off the PCIe bus (via a bus extender) are proving to be too noisy to
use. So I am
On Fri, Jan 21, 2011 at 8:52 PM, Jorge Luis jo...@luisnet.com wrote:
On 01/21/2011 07:31 AM, Mohammed Shafi wrote:
On Fri, Jan 21, 2011 at 3:09 AM, Jorge Luisjo...@luisnet.com wrote:
On 20 Jan 2011 20:14, C Anthony Risingeranth...@extof.me wrote:
On Thu, Jan 20, 2011 at 5:12 AM, Mohammed
On Fri, Jan 21, 2011 at 9:26 PM, Sujith m.suj...@gmail.com wrote:
Jorge Luis wrote:
I have applied the patches that Sujith posted last night with the latest
compat drivers and my HTC now works without issues.
I have also loaded it with 6 more stations and it worked fine for a
while but after
On Thu, Jan 20, 2011 at 3:23 PM, Bernhard Walle wa...@corscience.de wrote:
Hi again,
Am 11.01.2011 17:24, schrieb Bernhard Walle:
can somebody explain what
[...]
PHY ERR : 96196
[...]
UNDERRUN : 96196
[...]
in /sys/kernel/debug/ath9k/phy0/recv actually
On Thu, Jan 20, 2011 at 3:43 PM, Bernhard Walle wa...@corscience.de wrote:
Hello,
Am 20.01.2011 11:07, schrieb Mohammed Shafi:
On Thu, Jan 20, 2011 at 3:23 PM, Bernhard Walle wa...@corscience.de wrote:
Am 11.01.2011 17:24, schrieb Bernhard Walle:
can somebody explain what
On Wed, Jan 19, 2011 at 6:30 AM, Jorge Luis at...@luisnet.com wrote:
Senthilkumar Balasubramanian senthil.balasubramanian at gmail.com writes:
On Mon, Dec 27, 2010 at 9:58 AM, Mohammed Shafi shafi.ath9k at gmail.com
wrote:
2010/12/27 . .m. mulisak at hotmail.com:
My first post, please
On Fri, Jan 21, 2011 at 3:09 AM, Jorge Luis jo...@luisnet.com wrote:
On 20 Jan 2011 20:14, C Anthony Risinger anth...@extof.me wrote:
On Thu, Jan 20, 2011 at 5:12 AM, Mohammed Shafi
shafi.wirel...@gmail.com wrote:
On Wed, Jan 19, 2011 at 6:30 AM, Jorge Luis at...@luisnet.com wrote
On Wed, Jan 19, 2011 at 5:28 PM, Steve Brown sbr...@cortland.com wrote:
On Wed, 2011-01-19 at 12:06 +0530, Mohammed Shafi wrote:
On Wed, Jan 19, 2011 at 12:56 AM, Steve Brown sbr...@cortland.com wrote:
I'm looking at the issue of beacons with different intervals.
There is a beacon_interval
On Wed, Jan 19, 2011 at 12:56 AM, Steve Brown sbr...@cortland.com wrote:
I'm looking at the issue of beacons with different intervals.
There is a beacon_interval in struct ath_softc as well as one in struct
ath_beacon_config which is also part of ath_softc.
Are both needed?
On Fri, Jan 14, 2011 at 11:06 PM, y bhanu kernelccr...@gmail.com wrote:
Hi Guys,
I am trying to scan to scan for my under-test Access Point for a ubuntu
client.
It shows me multiple ESSIDs in a a single cell and also it marks the
Mode Unknown/bug.
Any clues why this is happening?
On Wed, Jan 12, 2011 at 4:20 PM, brass2000 brass2...@wp.pl wrote:
Hi all. I have a problem with that device. On my Fedora 11 distro with
kernel 2.6.36.2 works fine. I ran the same fedora on icop vortex dx and card
does't work.
I try compile driver from
On Thu, Jan 13, 2011 at 8:43 AM, Tao Jin jintao@gmail.com wrote:
Dear all,
I have a Linksys WRT160NL router, which has a 802.11n chip, and runs
OpenWRT firmware with ath9k driver. This driver is built from
compat-wireless-2010-12-16 snapshot.
I set up the router as g mode only, and
to rx problem people were
discussing.
On Thu, Jan 13, 2011 at 12:40 AM, Mohammed Shafi
shafi.wirel...@gmail.com wrote:
On Thu, Jan 13, 2011 at 8:43 AM, Tao Jin jintao@gmail.com wrote:
Dear all,
I have a Linksys WRT160NL router, which has a 802.11n chip, and runs
OpenWRT firmware with ath9k
On Thu, Jan 6, 2011 at 3:34 AM, Peter Stuge pe...@stuge.se wrote:
Lara Deek wrote:
I wanted to ask if anyone has any particular recommendations or
preferences between the two PC cards that I outlined.
Ubiquiti in general makes good products.
thanks for passing the information
//Peter
On Fri, Jan 7, 2011 at 10:30 PM, Galen gal...@zinkconsulting.com wrote:
What is the status of true Greenfield support in ath9k with AR9002/AR9003?
Basic tests with hostapd, ath9k, etc. seem to show that it is not working
with AR9280. However, this could be a hardware or software (ath9k,
On Wed, Jan 12, 2011 at 11:40 AM, ravi veerad veerad.r...@gmail.com wrote:
Hi,
Please can any one guide me, to find the files or function in ath9k
driver which interact with iw or hostapd user space tool using netlink
socket. As per study found that, iw tool use the netlink socket
On Fri, Jan 7, 2011 at 4:22 PM, Jouni Malinen jouni.mali...@atheros.com wrote:
On Wed, 2011-01-05 at 14:59 -0800, Lara Deek wrote:
I would please like to ask what are the relevant places for code
change in ath9k for beacon reception and transmission? Also, which
struct can I change to control
On Fri, Jan 7, 2011 at 3:13 AM, Bill Jordan bjor...@rajant.com wrote:
I'm running a Ubiquity SR71-A (AR9160) as an access point. I've been
noticing many calls to ath_reset, so with some debugging, I determined
that ath9k_hw_check_alive() in ath9k_tasklet() frequently fails
(routinely fails 2
On Thu, Jan 6, 2011 at 4:29 AM, Lara Deek lara.d...@gmail.com wrote:
Hello,
I would please like to ask what are the relevant places for code change in
ath9k for beacon reception and transmission? Also, which struct can I change
to control the contents of a beacon packet?
Please look at
On Wed, Jan 5, 2011 at 3:34 AM, Geoffrey Challen chal...@buffalo.edu wrote:
I would like to log ath9k device transitions between power states —
transmit, awake, full sleep, network sleep, etc. Can someone suggest the
easiest way to do this? Kernel logging seems like it would work but might
On Wed, Jan 5, 2011 at 6:29 AM, Lara Deek larad...@cs.ucsb.edu wrote:
Hello,
I want to purchase 802.11a/b/g/n dual-band PC cards with Atheros chipsets to
support the ath9k driver and to work in master (AP) mode. Two cards I found
are the AirMagnet C1060 (AR5416, AR5133 chipsets) and the
On Mon, Jan 3, 2011 at 8:00 PM, Markus Mÿfcller
xsnoopy_2...@yahoo.de wrote:
Hello,
i have to connect to a new Wifi AP: Dlink DIR 600 and i have a TP-Link
TL-WN422G.
I compiled the compat wireless driver from 2010 12 26 and use the last
snapshot firmware.
The problem is: I got
-- Forwarded message --
From: Markus Mÿfcller xsnoopy_2...@yahoo.de
Date: Mon, Jan 3, 2011 at 8:47 PM
Subject: Re: [ath9k-devel] Connection Problem with ATH9K an Dlink DIR 600 Router
To: Mohammed Shafi shafi.at...@gmail.com
Hello,
here comes the complet dmes output from
On Tue, Jan 4, 2011 at 12:04 AM, mbutubuntu mbutubu...@yahoo.it wrote:
Hello folks, I've a Netgear WNA1100 USB adaptor and I've installed drivers
from compat wireless on Fedora 14 with Kernel 2.6.35.10-74, it works but
iwconfig says the bandwidth is limited to 1Mbps, the network is very slow
On Wed, Dec 29, 2010 at 12:22 PM, Jouni Malinen
jouni.mali...@atheros.com wrote:
On Tue, 2010-12-28 at 22:32 -0800, Mohammed Shafi wrote:
On Wed, Dec 29, 2010 at 11:40 AM, Robert Chan
robert.chan.l...@gmail.com wrote:
So should I assume that the details here are too updated or are the modes
2010/12/27 . .m. muli...@hotmail.com:
My first post, please feel free to criticize.
I have bought mentioned USB stick, I saw some note about HOST AP mode for
win,
but I sadly found I am not able to run master (AP) mode under linux
(compat-wireless 2010-12-14)
AP mode is yet to be supported
On Wed, Dec 22, 2010 at 5:54 AM, Masahiro Inoue
miyabi.-.in...@nifty.com wrote:
Mr. Mohammed
Thank you for the reply.
In the hostapd config file hostapd.conf can you please try with
hw_mode=b
and
hw_mode=g
Also can you please send your configuration file of hostapd.
The symptom did not
In the hostapd config file hostapd.conf can you please try with
hw_mode=b
and
hw_mode=g
Also can you please send your configuration file of hostapd.
thanks,
shafi
On Tue, Dec 21, 2010 at 10:10 AM, Masahiro Inoue
miyabi.-.in...@nifty.com wrote:
Mr. Mohammed
Thank you for the reply.
I'm sorry.
On Thu, Dec 16, 2010 at 11:21 AM, Masahiro Inoue
miyabi.-.in...@nifty.com wrote:
Hello,
It is as follows in the packet from the client side.
Supported Rates: 1.0(B) 2.0(B) 5.5(B) 11.0(B)
It is as follows in the response packet from the servers end to this.
Data Rate: 54.0 Mb/s
Isn't the
On Thu, Dec 16, 2010 at 10:36 AM, Daniel Halperin
dhalp...@cs.washington.edu wrote:
On Wed, Dec 15, 2010 at 8:19 PM, Peter Stuge pe...@stuge.se wrote:
Daniel Halperin wrote:
I'm using Ubiquiti SR71E based on AR9280, on Ubuntu 10.04.1 LTS, with
wireless-testing most recent
On Thu, Dec 16, 2010 at 2:32 PM, Masahiro Inoue
miyabi.-.in...@nifty.com wrote:
Mr. Mohammed
Thank you for the reply.
Can you please tell what card you are using ?
Sorry.
Is it good in information on lspci?
Information on the card that I am using is this.
kernel version is 2.6.27.
$
On Thu, Dec 16, 2010 at 5:09 PM, Masahiro Inoue
miyabi.-.in...@nifty.com wrote:
Mr. Mohammed
Thank you for the reply.
Thanks .You are observing any functionality problem like disconnection
rather than what is observed in the sniffer trace about that Extended
rates
I'm sorry.
I do not
On Fri, Dec 17, 2010 at 8:10 AM, Masahiro Inoue
miyabi.-.in...@nifty.com wrote:
Mr. Mohammed
Thank you for the reply.
Can you able to establish connection between the client and server
without any problems ?
I understand that your Sony client is working in 802.11 'b' mode
where as your
On Wed, Dec 15, 2010 at 6:14 PM, mason myongsu.c...@gmail.com wrote:
From the openwrt site, mac address filtering has not implemented yet at
ath9k, I read.
The mac filtering has not implemented at ath9k or not?
Yes there is no support to filter a specific MAC address alone and I
am not user
Informatique
*** Fondation de la Miséricorde
*** Email : o.bilh...@fondation-misericorde.fr
*** Tel : 02.31.38.50.50
*** Fax : 02.31.38.50.00
Le 11.12.2010 11:17, Mohammed Shafi a écrit :
On Fri, Dec 10, 2010 at 8:03 PM, Olivier BILHAUT
o.bilh...@fondation-misericorde.fr wrote
On Fri, Dec 10, 2010 at 9:37 PM, Luis R. Rodriguez
lrodrig...@atheros.com wrote:
On Thu, Dec 09, 2010 at 11:48:15PM -0800, Mohammed Shafi wrote:
On Fri, Dec 10, 2010 at 2:14 AM, B. James Phillippe bryan...@comcast.net
wrote:
Hi All,
I'm new to this list and a bit new to using this project
On Fri, Dec 10, 2010 at 8:03 PM, Olivier BILHAUT
o.bilh...@fondation-misericorde.fr wrote:
Hello !
We're currently putting in production many wireless clients in our
Hospital (France). There is for the moment 20 linux clients on approx.
30 hp colubris access points.
I know that my request
2010/12/10 Lorna González lorna.g...@gmx.net:
Hello,
Does anyone know where to find information regarding the ath9k rate control
functionality?
please look at rc.h and rc.c source code in ath9k driver.
Thanks in advanced
Lorna González
--
GRATIS! Movie-FLAT mit über 300 Videos.
Jetzt
On Fri, Dec 10, 2010 at 2:14 AM, B. James Phillippe
bryan...@comcast.net wrote:
Hi All,
I'm new to this list and a bit new to using this project; hopefully I'm not
doing something obviously stupid. :)
I have an ARM-based Intel IXP400 system with more than 64MB RAM and with an
Atheros
On Fri, Dec 3, 2010 at 1:34 PM, Ben Greear gree...@candelatech.com wrote:
On 12/01/2010 11:16 PM, Mohammed Shafi wrote:
On Thu, Dec 2, 2010 at 11:14 AM, Ben Greeargree...@candelatech.com
wrote:
On 12/01/2010 09:09 PM, Mohammed Shafi wrote:
On Thu, Dec 2, 2010 at 1:28 AM, Ben Greeargree
On Fri, Dec 3, 2010 at 4:29 PM, mason myongsu.c...@gmail.com wrote:
Hi,
An ar9160 chipset is designed for 3X3 mimo support. If I want to use it as
2T2R mimo because I have only two antennas, how can I handle with this case?
Thus, I asked suggestions for two different module vendors.
On Fri, Dec 3, 2010 at 5:18 PM, Mohammed Shafi shafi.wirel...@gmail.com wrote:
On Fri, Dec 3, 2010 at 4:29 PM, mason myongsu.c...@gmail.com wrote:
Hi,
An ar9160 chipset is designed for 3X3 mimo support. If I want to use it as
2T2R mimo because I have only two antennas, how can I handle
On Fri, Dec 3, 2010 at 4:29 PM, mason myongsu.c...@gmail.com wrote:
Hi,
An ar9160 chipset is designed for 3X3 mimo support. If I want to use it as
2T2R mimo because I have only two antennas, how can I handle with this case?
Thus, I asked suggestions for two different module vendors.
One
On Thu, Dec 2, 2010 at 5:13 PM, Misha Shnurapet
shnura...@fedoraproject.org wrote:
02.12.2010, 17:43, Misha Shnurapet shnura...@fedoraproject.org:
If there is a Bugzilla thread for me to subscribe to watch the issue, I
would appreciate the link.
Will let you know If I find a thread.It seems
On Fri, Dec 3, 2010 at 11:00 AM, Peizhao Hu peizhao.resea...@gmail.com wrote:
Hi
Could anyone please tell me the progress on Ath9k HT support for adhoc
mode?
adhoc mode is handled in mac80211 and that is yet to support HT.
On the latest OpenWRT trunk build, I can only get 22Mbps throughput
On Wed, Dec 1, 2010 at 6:24 PM, Misha Shnurapet
shnura...@fedoraproject.org wrote:
Hi.
Does Netgear WNA1100 USB adapter support master mode?
Yes , you have to use hostapd for that.you cannot use iwconfig command
to set it as a master mode.
Thanks.
--
Best regards,
Misha Shnurapet, Fedora
On Wed, Dec 1, 2010 at 8:10 PM, Helmut Schaa
helmut.sc...@googlemail.com wrote:
Hi,
Am Mittwoch 01 Dezember 2010 schrieb Mohammed Shafi:
On Wed, Dec 1, 2010 at 4:48 PM, Helmut Schaa
helmut.sc...@googlemail.com wrote:
The last_tx_rate field was also updated for non-data frames
On Mon, Nov 29, 2010 at 1:49 PM, Adrian Chadd adrian.ch...@gmail.com wrote:
So it turns out that the SR-71A card TX power rates are quoted based
on the sum of all three chain TX'ing, rather than per-chain TX power.
Given that legacy frames are transmitted through all chains anyway
(there's no
curve.)
Thanks,
Adrian
On 29 November 2010 16:39, Mohammed Shafi shafi.at...@gmail.com wrote:
On Mon, Nov 29, 2010 at 1:49 PM, Adrian Chadd adrian.ch...@gmail.com wrote:
So it turns out that the SR-71A card TX power rates are quoted based
on the sum of all three chain TX'ing, rather than per
On Sun, Nov 28, 2010 at 7:49 PM, Matthias Bernges
matthiasbern...@gmx.de wrote:
,Hello,
2010/11/26 Mohammed Shafi shafi.at...@gmail.com:
On Fri, Nov 26, 2010 at 12:17 AM, Matthias Bernges
matthiasbern...@gmx.de wrote:
Hello,
I've a TP-Link TL-WN422G using Atheros AR9271 chipset. I have
will it later look whether i am able to get int the latest compat.
regards,
Peizhao
On 25/11/10 15:05, Mohammed Shafi wrote:
On Thu, Nov 25, 2010 at 9:27 AM, Peizhao Hupeiwo...@gmail.com wrote:
Hi
I am wondering whether this problem is due to the OpenWRT or an issue of
the ATH9k
On Fri, Nov 26, 2010 at 12:17 AM, Matthias Bernges
matthiasbern...@gmx.de wrote:
Hello,
I've a TP-Link TL-WN422G using Atheros AR9271 chipset. I have
downloaded and installed compat-wireless-2.6.36-4 and copied the
newest ar9271.fw to /lib/firmware.
Can you please try with the latest
On Thu, Nov 25, 2010 at 9:27 AM, Peizhao Hu peiwo...@gmail.com wrote:
Hi
I am wondering whether this problem is due to the OpenWRT or an issue of
the ATH9k.
---[ cut here ]
WARNING: at
On Thu, Nov 25, 2010 at 10:03 AM, Blaise Gassend
bla...@willowgarage.com wrote:
Is setting txpower in master mode supposed to work on ath9k?
Yes it should be.How are we setting the tx-power using the command ?
I have been adjusting the txpower on an ath9k radio set as master
mode, and
2010/11/24 清 廖 liaoqin...@yahoo.com.cn
Hi all,
I want to know is it possibile to modify the channel
width(5MHZ,10MHZ,20MHZ,40MHZ,etc) through the ath9k driver souce code?
As per my understanding we are configuring the channel width based on the
Access Point's Channel width. I looked at the
2010/11/22 Petr Štetiar yn...@true.cz:
Mohammed Shafi shafi.wirel...@gmail.com [2010-11-22 11:15:17]:
On Fri, Nov 19, 2010 at 4:35 PM, Petr Štetiar yn...@true.cz wrote:
1. line 128 in htc_drv_init.c time_left =
wait_for_completion_timeout(priv-htc-target_wait, HZ);
Can you please try out
On Mon, Nov 22, 2010 at 5:00 PM, Petr Štetiar yn...@true.cz wrote:
Mohammed Shafi shafi.wirel...@gmail.com [2010-11-22 15:12:18]:
I am trying to reproduce the same in my PC but it never got it reproduced ,
can you please try with latest wireless testing tree or compat wireless ?
Can you
On Sat, Nov 20, 2010 at 7:29 PM, Petr Štetiar yn...@true.cz wrote:
Digged into it more, added few printks, after reboot:
Sorry for the late reply and thanks for your effort
[ 521.71] ath9k_hif_usb_probe
[ 521.72] ath9k_hif_usb_dev_init
[ 521.77]
On Fri, Nov 19, 2010 at 4:35 PM, Petr Štetiar yn...@true.cz wrote:
Hi,
I've USB WiFi stick with VID 0x0cf3 and PID 0x1006, it's TPLink TL-WN422Gv2.
Everything works fine, even the WPA, but until I reset my board (it's ARMv4t
ts7250/mach-ep93xx). Then if the driver is loaded again, it ends
On Fri, Nov 19, 2010 at 6:39 AM, y bhanu kernelccr...@gmail.com wrote:
I am trying to bring up my wireless Card in AP mode.
I can bring up the device and bridge it to the ETH0 port but when I
try to scan from a wireless client device, I don't see any signal of
Atheros_XSpan.
Any ideas where I
On Fri, Nov 19, 2010 at 4:35 PM, Petr Štetiar yn...@true.cz wrote:
Hi,
Hi
I've USB WiFi stick with VID 0x0cf3 and PID 0x1006, it's TPLink TL-WN422Gv2.
Everything works fine, even the WPA, but until I reset my board (it's ARMv4t
ts7250/mach-ep93xx). Then if the driver is loaded again, it ends
On Mon, Nov 15, 2010 at 2:52 PM, Queenie de Melo queenie...@gmail.com wrote:
Dear All,
Read that 802.11r fast BSS transition (roaming) can happen within Protocol
layer 2 or layer3.
Please let me know what kind of roaming(802.11r) is supported by mac80211?
What files in my driver deal with
On Tue, Nov 9, 2010 at 11:29 PM, Min-Wook Jeong minw...@stanford.edu wrote:
Hi!
Hi
We would like to post a new question about the power and rate control.
We have tried a power control with Netgear WNA1100 (ath9k_htc) adapter.
Apparently, this adapter seems to be supporting power control as we
On Fri, Nov 5, 2010 at 4:56 AM, jd jd jdiq...@googlemail.com wrote:
Dear all,
I am trying to measure the optimal performance of 802.11n in a typical
indoor scenario, using the most capable products available that are
compatible with open sourced Linux drivers, and then discover the best
On Wed, Nov 3, 2010 at 11:00 AM, Queenie de Melo queenie...@gmail.com wrote:
Hi,
I would lik to know if the ath9k drivers come with inbuilt nl80211 and
cfg80211
Or is do i have to separaely download and use nl80211 and cfg80211?
No you don't have to when you do
sudo modprobe ath9k it will
, Mohammed Shafi
shafi.wirel...@gmail.com wrote:
On Wed, Nov 3, 2010 at 11:00 AM, Queenie de Melo queenie...@gmail.com
wrote:
Hi,
I would lik to know if the ath9k drivers come with inbuilt nl80211 and
cfg80211
Or is do i have to separaely download and use nl80211 and cfg80211
On Thu, Nov 4, 2010 at 10:35 AM, Queenie de Melo queenie...@gmail.com wrote:
Hi...
Found from
http://wireless.kernel.org/en/users/Drivers/ath9k#supported_chipsets
That my chipset is supported :)
Any idea why Iam not getting the wifi0 interface... ???
By default you won't get that , but I
On Mon, Nov 1, 2010 at 8:54 AM, 俊杰陈 cjjnj...@gmail.com wrote:
hello all
I install compat-wireless pakage to linux-2.6.30.4,every thing
gone OK but scanning failed.
I got following error
wlan0 Failed to read scan data : Resource temporarily
unavailable
On Wed, Nov 3, 2010 at 3:49 AM, Lloyd Lopes lloydlo...@retromod.co.za wrote:
Hi guys
In November last year you posted info on the fact that HT doesn't work in
IBSS (ad hoc) mode in ath9k. You were playing around with it at the time.
We need to address this thing in mac80211.
To your
On Mon, Nov 1, 2010 at 8:54 AM, 俊杰陈 cjjnj...@gmail.com wrote:
hello all
I install compat-wireless pakage to linux-2.6.30.4,every thing
gone OK but scanning failed.
I got following error
wlan0 Failed to read scan data : Resource temporarily
unavailable
On Sat, Oct 30, 2010 at 11:30 AM, Poonam2 Gupta
poonam2.gu...@aricent.com wrote:
Hi,
we are using 2 wifi cards one on 2.4 Ghz and other on 5 Ghz, when we do the
air-time link metric computaion, then for both the links, it shows as zero.
can you pls let us know why link metric is computed as
On Fri, Oct 29, 2010 at 10:29 AM, Queenie de Melo queenie...@gmail.com wrote:
Hi All,
Iam not sure if iam posting in the right forum, but yeah. this
forum can surely clear my doubt.
I have loaded the ath9k driver and i get 3 interface names on my board
--- wlan0, wifi0 and wmaster0.
MASK == dev_addr.
hostapd changed the BSSID without succesfull.
So it does not work either.
Thanks
got no idea why its not working.
Original-Nachricht
Datum: Wed, 27 Oct 2010 19:54:39 +0530
Von: Mohammed Shafi shafi.wirel...@gmail.com
An: Lorna González lorna.g
Hi,
I think you are using ath9k_htc driver and this is not a
functionality issue. The rate control in ath9k_htc is done in firmware , so
we are not updating the tx rate to user space .We are looking into this
issue.To make sure that the tx rate is high you can look into the ath9k_htc
Hi ,
In the hostapd.conf file change the value of beacon_int=100 to
beacon_int=200
regards,
shafi
On Mon, Oct 18, 2010 at 9:22 PM, nathan nitha_2...@yahoo.com wrote:
I tried to change the default beacon interval time to 200ms. Could not do
it. could someone telll me where to
: -109 dBm
Regards,
Mickael
De : Mohammed Shafi [shafi.at...@gmail.com]
Date d'envoi : jeudi 14 octobre 2010 09:28
À : MASSON Mickaël NRS
Cc : ath9k-devel-requ...@lists.ath9k.org
Objet : Re: [ath9k-devel] [AR9280] unable to get noise level
Hi
In case you are interested in capturing the packets of the Ad-Hoc
creator , you can create a monitor mode for the joiner of the ad-hoc
network.
I am not sure this is the right way , but hope it works.
with regards,
shafi
On Tue, Oct 12, 2010 at 6:21 PM, Mohammad Abdelhadi moh.ja...@ieee.org
701 - 797 of 797 matches
Mail list logo