If the volumen "RCWORMW-0004", no purge or recicle. Then the DATA if you
are.
The problem maybe was the time retention the Job and Files.
What would I do? I delete of catalog the volumen RCWORMW-0004
and then recreate the volumen RCWORMW-0004 in the catalog with
"bscan"
bscan -V RC
Dear Chandler,
thank you for your email.
Job log of JobID 244:
19-Feb 15:04 backup2-dir JobId 244: Start Restore Job
RestoreFiles.2019-02-19_15.03.58_47
19-Feb 15:04 backup2-dir JobId 244: Using Device "LTO-6" to read.
19-Feb 15:05 backup2-sd JobId 244: Ready to read from volume "RCWORMW-0004"
o
Kindly, if you could share the job log for the restore JobId 244, it may
have some error/warning messages. Also tell us the complete steps you
are using when running the restore, it will help us. Thanks
___
Bacula-users mailing list
Bacula-users@li
Hi Bacula gurus,
recently we bought a LTO-6 tape drive. This is an IBM 7226 LTO-6.
It has the latest firmware J451. Currently we are using bacula 9.4.1 on
Ubuntu 18.04 bionic.
We installed the IBM LTO-6 tape driver on linux: lin_tape. lin_taped daemon
is also running.
Bacula is using /dev/IBMtape0
@Un-check "hide protected operating system files"
Thanks much :-)
On 04/19/2013 02:44 PM, LDC - Gustavo El Khoury wrote:
As a closing remark, whenever a file or folder is created by/as SYSTEM
user on Windows (which is Bacula's scenario) the default is that you
can't see them. In your case, tha
On 19/04/2013, at 02:35 p.m., Humphrey Bryant wrote:
> Hey Simone thanks for your input but I've always created an alternate
> directory (C:Restore) *before i do a restore job.
> Also i normally use the default restore job and only needed to change (mod)
> the FileSet, Where and Restore clien
Hey Simone thanks for your input but I've always created an alternate
directory (C:Restore) **before* i do a restore job.
Also i normally use the default restore job and only needed to change
(mod) the FileSet, Where and Restore client options for the respective
client and my restores would be s
Hello,
On 19 April 2013 18:49, Humphrey Bryant wrote:
> I never had any problems doing restores on 5.2.12 its only since I
> upgraded to 5.2.13, hope someone can shed some light on this issue (I'm
> backing up to File not tapes).
>
when restoring Windows files to another location that is not
Hi All,
I'm running CentOS 6.4 and i just upgraded my test backup server from
5.2.12 to 5.2.13-9.el6, after the upgrade I can no longer do restores to
my Windows 2003/2008 clients (backups runs fine btw).
Each time I run a restore job for my Windows Clients I receive a message
that the resto
>>> Do you have different file and job retentions?
>> Just to clarify this - I can see the _files_ in the database when I look
>> at the files in the JobId of the full backup, but when I go to do a
>> restore it says no files are available.
>
> Perhaps the problem could be something to do with
On Thu, May 26, 2011 at 11:43:16AM +0100, Alan Brown wrote:
> John Drescher wrote:
> >> I'm trying to restore a 3 month old backup, but the database says there
> >> are no files to restore.
> >>
> >> The strange thing is, I can _see_ the entries in the database for that
> >> date and the full backu
John Drescher wrote:
>> I'm trying to restore a 3 month old backup, but the database says there
>> are no files to restore.
>>
>> The strange thing is, I can _see_ the entries in the database for that
>> date and the full backup 10 days before.
>>
>> Has anyone seen this kind of behaviour?
>>
>
>
John Drescher wrote:
>> I'm trying to restore a 3 month old backup, but the database says there
>> are no files to restore.
>>
>> The strange thing is, I can _see_ the entries in the database for that
>> date and the full backup 10 days before.
>>
>> Has anyone seen this kind of behaviour?
>>
>
>
> I'm trying to restore a 3 month old backup, but the database says there
> are no files to restore.
>
> The strange thing is, I can _see_ the entries in the database for that
> date and the full backup 10 days before.
>
> Has anyone seen this kind of behaviour?
>
Do you have different file and jo
I'm trying to restore a 3 month old backup, but the database says there
are no files to restore.
The strange thing is, I can _see_ the entries in the database for that
date and the full backup 10 days before.
Has anyone seen this kind of behaviour?
-
Hi, i'm using bacula-dir Version: 2.4.4 (28 December 2008)
i486-pc-linux-gnu debian 5.0
My problem is when i'm try to restore some files, bacula returns me an
error message like:
Error: restore.c:975 Write error on /
And when i go to check the restore, i detect it writes me a little bit
of th
2010/2/19 João Alberto Kuchnier :
> Hello Everyone!
>
> I'm new using Bacula and I'm having some problems to restore older backups.
> I need to restore a November 09 backup but only files from the last 30 days
> are displayed. Is this because I'm using 30 days for file retention? Is
> there anyway
Hello Everyone!
I'm new using Bacula and I'm having some problems to restore older
backups. I need to restore a November 09 backup but only files from the
last 30 days are displayed. Is this because I'm using 30 days for file
retention? Is there anyway to access that older files?
Sorry for my
Hello all,
I lately got bacula-2.4.2 installed, and I recently noted something,
which I am not sure if it is a feature or a problem.
I did a restore from a full backup job, and it failed.
It said this - ( note : /home/xxx * *** .mp4 is not the
actual file name )
31-Oct 11:38 storage0
On Mon, 2007-10-29 at 16:45 +0100, Christof Klaus wrote:
> hello luiz,
> you didnt mention where you expect the file to be restored...the
> restore-location given in the job is /tmp .. did you look there ?
>
> christof klaus.
>
Luiz:
Restore jobs defined in bacula-dir.conf are normally used a
> Restore Client: michaelpc
> ^^^
> Storage: external
> When:2007-10-29 21:53:15
> Catalog: MyCatalog
> Priority:10
> OK to run? (yes/mod/no):yes
>
> ------------end-
d nothing ...
>
> thanks,
> Luiz Nogueira
>
> -
>
>
> Date: Mon, 29 Oct 2007 16:45:13 +0100
> From: Christof Klaus <[EMAIL PROTECTED]>
> Subject: Re: [Bacula-users] Restore Problems
> To: bacula-users@lists.sourceforge.net
> Message-ID: <[EMAIL PROTEC
hello Christof,
yes I looked there ...I tried changing the location to other folders,
checked permissions and nothing ...
thanks,
Luiz Nogueira
-
Date: Mon, 29 Oct 2007 16:45:13 +0100
From: Christof Klaus <[EMAIL PROTECTED]>
Subject: Re: [Bacula-users] Restore Problems
To: bacula
hello luiz,
you didnt mention where you expect the file to be restored...the
restore-location given in the job is /tmp .. did you look there ?
christof klaus.
Luiz Gustavo R. Nogueira schrieb:
> Hello all,
>
> When I try to restore a file through the console, everything looks fine
> and I get a
Hello all,
When I try to restore a file through the console, everything looks fine
and I get a sucessful message and a email saying that file was restored
sucessfully, but when I go to the location where the restored file
should be, nothing is there.
I'm using bacula 2.0.3 with a RedHat AS 4 kern
On Tuesday 03 April 2007 13:26, Juliet Kemp wrote:
> Kern Sibbald wrote:
> > On Thursday 29 March 2007 16:47, Juliet Kemp wrote:
> >> Hi,
> >>
> >> I need to do a very large restore - the filesystem in question is 1TB &
> >> it was about 80% full last I looked.
> >>
> >> When I use bacula-console,
Kern Sibbald wrote:
> On Thursday 29 March 2007 16:47, Juliet Kemp wrote:
>> Hi,
>>
>> I need to do a very large restore - the filesystem in question is 1TB &
>> it was about 80% full last I looked.
>>
>> When I use bacula-console, and ask for a restore of the last backup from
>> this client, it
Hi,
On 3/29/2007 4:47 PM, Juliet Kemp wrote:
> Hi,
>
> I need to do a very large restore - the filesystem in question is 1TB &
> it was about 80% full last I looked.
>
> When I use bacula-console, and ask for a restore of the last backup from
> this client, it generates the initial long list o
On Thursday 29 March 2007 16:47, Juliet Kemp wrote:
> Hi,
>
> I need to do a very large restore - the filesystem in question is 1TB &
> it was about 80% full last I looked.
>
> When I use bacula-console, and ask for a restore of the last backup from
> this client, it generates the initial long
Hi,
I need to do a very large restore - the filesystem in question is 1TB &
it was about 80% full last I looked.
When I use bacula-console, and ask for a restore of the last backup from
this client, it generates the initial long list of jobs, starts to build
the file list, and then hangs (afte
Hello,
A general comment: perhaps I am wrong, but it seems to me that the scheme you
are using for backups (one Volume for each day) is virtually guaranteed to
cause a catastrophe if there is a disk error. The reason is that you have
*all* Wednesdays in a single volume. If you loose that volum
On Tuesday 11 October 2005 13:42, Phil Stracchino wrote:
> Danie Theron wrote:
> > Hi , sorry for the long post :)
> >
> > Wanted to do a test restore , and it seems either my catalog is doing
> > funny things , or I messed up in the Pool defs :
> >
> > Now , correct me if I'm wrong , but shouldn't
Danie Theron wrote:
> Hi , sorry for the long post :)
>
> Wanted to do a test restore , and it seems either my catalog is doing
> funny things , or I messed up in the Pool defs :
>
> Now , correct me if I'm wrong , but shouldn't it use the latest full ,
> diff , as well as ALL the incr vols?
No.
Arno Lehmann wrote:
Hello,
On 11.10.2005 09:31, Danie Theron wrote:
Hi , sorry for the long post :)
No worries, I didn't read it :-)
(Only joking)
Wanted to do a test restore , and it seems either my catalog is doing
funny things , or I messed up in the Pool defs :
+---+---+
Hello,
On 11.10.2005 09:31, Danie Theron wrote:
Hi , sorry for the long post :)
No worries, I didn't read it :-)
(Only joking)
Wanted to do a test restore , and it seems either my catalog is doing
funny things , or I messed up in the Pool defs :
+---+---+--+--
Hi , sorry for the long post :)
Wanted to do a test restore , and it seems either my catalog is doing
funny things , or I messed up in the Pool defs :
+---+---+--+-+--+---+--++
| JobId | Level | JobFile
Hello,
Can anyone help me with a restore problem please. I'm still trying to
setup bacula for the first time. Backups seem to go ok but when I run a
restore all for any client, the files restored /never/ matches the files
backed up.
Here's some output:
*from backup*
10-Aug 10:01 dreadnought-d
On Mon, Jul 04, 2005 at 10:21:21AM +0300, viktorija wrote:
> Hello!
>
> I need a help. I have problem with restore. My bacula configuration is
> following. Every day Incremental backup i storage in File, but at saturdays i
> have Incremental backup on storage Archive:
> # section #0 - "Weekl
On Monday 04 July 2005 12:04, viktorija wrote:
> Anyone can help me?
> It is very important for me :(
Try using the "use" command in the Console to switch databases.
>
> In which cases this error occurs?
> The defined FileSet resources are:
> Selection is empty!
>
> Thanks for your help!
>
> Vik
Anyone can help me?
It is very important for me :(
In which cases this error occurs?
The defined FileSet resources are:
Selection is empty!
Thanks for your help!
Viktoria
On Mon, 4 Jul 2005 10:21:21 +0300
viktorija <[EMAIL PROTECTED]> wrote:
> Hello!
>
> I need a help. I have problem with rest
Hello!
I need a help. I have problem with restore. My bacula configuration is
following. Every day Incremental backup i storage in File, but at saturdays i
have Incremental backup on storage Archive:
# section #0 - "WeeklyCycle"
Schedule {
Name = "WeeklyCycle"
Run = Incremental mon-f
41 matches
Mail list logo
