Hi,
For a couple of weeks I have been trying to get ROS installed on my BBxM
using Angstrom 2.6.32 kernel. All I have found so far is that ROS is NOT
supported on the BBxM, which is basically not true because it is available
on Ubuntu for BB(xM). So my question is: why would it not be for Angst
Hi,
Due to software dependencies I need to install Ubuntu 13.04 on the
BeagleBoard-xM, but there is only a server install and no pre-installed
desktop version as with 12.04. I installed the installer on 1 sd card, then
connected a cardreader with another sd (call it nr2) card to a usb port and
Op donderdag 7 november 2013 16:19:58 UTC+1 schreef RobertCNelson:
>
> On Thu, Nov 7, 2013 at 8:50 AM, > wrote:
> > Hi,
> >
> > Due to software dependencies I need to install Ubuntu 13.04 on the
> > BeagleBoard-xM, but there is only a server install and no pre-installed
> > desktop version as
Op donderdag 7 november 2013 19:59:20 UTC+1 schreef RobertCNelson:
>
> On Thu, Nov 7, 2013 at 12:28 PM, > wrote:
> > Op donderdag 7 november 2013 16:19:58 UTC+1 schreef RobertCNelson:
> >>
> >> On Thu, Nov 7, 2013 at 8:50 AM, wrote:
> >> > Hi,
> >> >
> >> > Due to software dependencies I
Op donderdag 7 november 2013 20:48:57 UTC+1 schreef RobertCNelson:
>
> On Thu, Nov 7, 2013 at 1:42 PM, > wrote:
> >
> >
> > Op donderdag 7 november 2013 19:59:20 UTC+1 schreef RobertCNelson:
> >>
> >> On Thu, Nov 7, 2013 at 12:28 PM, wrote:
> >> > Op donderdag 7 november 2013 16:19:58 UT
Op donderdag 7 november 2013 20:48:57 UTC+1 schreef RobertCNelson:
>
> On Thu, Nov 7, 2013 at 1:42 PM, > wrote:
> >
> >
> > Op donderdag 7 november 2013 19:59:20 UTC+1 schreef RobertCNelson:
> >>
> >> On Thu, Nov 7, 2013 at 12:28 PM, wrote:
> >> > Op donderdag 7 november 2013 16:19:58 UT
Op donderdag 7 november 2013 21:54:33 UTC+1 schreef RobertCNelson:
>
> > Ok, that should work. Just a question: this is for armel or armhf ? How
> many
> > options do you recommend ?
>
> 13.04/raring has always been armhf "only".. armel was dropped from
> ports.ubuntu.com in 12.10...
>
>
Ok, t
Op vrijdag 8 november 2013 15:50:59 UTC+1 schreef RobertCNelson:
>
> On Fri, Nov 8, 2013 at 5:15 AM, > wrote:
> > Op donderdag 7 november 2013 21:54:33 UTC+1 schreef RobertCNelson:
> >>
> >> > Ok, that should work. Just a question: this is for armel or armhf ?
> How
> >> > many
> >> > opti
Op vrijdag 8 november 2013 18:35:34 UTC+1 schreef RobertCNelson:
>
> On Fri, Nov 8, 2013 at 11:13 AM, > wrote:
> >
> >
> > Op vrijdag 8 november 2013 15:50:59 UTC+1 schreef RobertCNelson:
> >>
> >> On Fri, Nov 8, 2013 at 5:15 AM, wrote:
> >> > Op donderdag 7 november 2013 21:54:33 UTC+1
Op vrijdag 8 november 2013 19:02:03 UTC+1 schreef RobertCNelson:
>
> > dpkg-divert: error: unable to create new file
> > '/var/lib/dpkg/diversions-new': Read-only file system
> > cleanup failed
> > can't remove '/target/usr/sbin/policy-rc.d': Read-only file system
> >
> > Cannot open question
Op vrijdag 8 november 2013 22:10:07 UTC+1 schreef RobertCNelson:
>
> On Fri, Nov 8, 2013 at 2:46 PM, > wrote:
> > Op vrijdag 8 november 2013 19:02:03 UTC+1 schreef RobertCNelson:
> >>
> >> > dpkg-divert: error: unable to create new file
> >> > '/var/lib/dpkg/diversions-new': Read-only file sy
Op vrijdag 8 november 2013 22:10:07 UTC+1 schreef RobertCNelson:
>
> On Fri, Nov 8, 2013 at 2:46 PM, > wrote:
> > Op vrijdag 8 november 2013 19:02:03 UTC+1 schreef RobertCNelson:
> >>
> >> > dpkg-divert: error: unable to create new file
> >> > '/var/lib/dpkg/diversions-new': Read-only file sys
Op zaterdag 9 november 2013 18:58:44 UTC+1 schreef RobertCNelson:
>
> On Sat, Nov 9, 2013 at 12:15 AM, > wrote:
> > Op vrijdag 8 november 2013 22:10:07 UTC+1 schreef RobertCNelson:
> >>
> >> On Fri, Nov 8, 2013 at 2:46 PM, wrote:
> >> > Op vrijdag 8 november 2013 19:02:03 UTC+1 schreef Rob
Op zaterdag 9 november 2013 18:58:44 UTC+1 schreef RobertCNelson:
>
> On Sat, Nov 9, 2013 at 12:15 AM, > wrote:
> > Op vrijdag 8 november 2013 22:10:07 UTC+1 schreef RobertCNelson:
> >>
> >> On Fri, Nov 8, 2013 at 2:46 PM, wrote:
> >> > Op vrijdag 8 november 2013 19:02:03 UTC+1 schreef Rober
Op zaterdag 9 november 2013 18:58:44 UTC+1 schreef RobertCNelson:
>
> On Sat, Nov 9, 2013 at 12:15 AM, > wrote:
> > Op vrijdag 8 november 2013 22:10:07 UTC+1 schreef RobertCNelson:
> >>
> >> On Fri, Nov 8, 2013 at 2:46 PM, wrote:
> >> > Op vrijdag 8 november 2013 19:02:03 UTC+1 schreef Rober
Op zondag 10 november 2013 15:33:29 UTC+1 schreef RobertCNelson:
>
> On Sun, Nov 10, 2013 at 6:36 AM, > wrote:
> > Op zaterdag 9 november 2013 18:58:44 UTC+1 schreef RobertCNelson:
> >>
> >> On Sat, Nov 9, 2013 at 12:15 AM, wrote:
> >> > Op vrijdag 8 november 2013 22:10:07 UTC+1 schreef Robe
Op zondag 10 november 2013 15:33:29 UTC+1 schreef RobertCNelson:
>
> On Sun, Nov 10, 2013 at 6:36 AM, > wrote:
> > Op zaterdag 9 november 2013 18:58:44 UTC+1 schreef RobertCNelson:
> >>
> >> On Sat, Nov 9, 2013 at 12:15 AM, wrote:
> >> > Op vrijdag 8 november 2013 22:10:07 UTC+1 schreef Robe
Hi,
I connected a mechanical device to 1 of the USB A ports and this device has
a PID update rate of 1 kHz. Instead of make a nice movement as it did on a
pc, it started to oscillate. I searched for update rate info in the board
manual, but found nothing. Can anyone tell me what the USB A updat
Op dinsdag 12 november 2013 16:24:49 UTC+1 schreef lisarden:
>
> Under Linux?
>
Yes, under Ubuntu Linux 13.04, to be exact.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe
Op dinsdag 12 november 2013 21:14:32 UTC+1 schreef lisarden:
>
> Do you use a wall adapter or a usb port to power the board?
>
I'm using a wall adapter, since as stated in the manual, otherwise I can't
connect anything to the USB ports like that device or keyboard, mouse or
cam.
--
For more opt
Op woensdag 13 november 2013 14:59:19 UTC+1 schreef Gerald:
>
> The USB Host ports works fine on USB power, as long as the current is
> demand is low. To support higher current devices, you need to run it on DC
> power.
>
Like I responded to lisarden, the board is powered by a wall-adapter so it
Op woensdag 13 november 2013 17:24:35 UTC+1 schreef Gerald:
>
> I don't have an answer for you.
>
Too bad. Thanks anyway.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe
of make a nice movement as it did
> on a pc, it started to oscillate. I searched for update rate info in the
> board manual, but found nothing. Can anyone tell me what the USB A update
> rate of the board is ? Or the turn around time ?
> >
> > Thanks.
>
>
> To hvn052:
Op woensdag 13 november 2013 19:05:45 UTC+1 schreef RobertCNelson:
>
> > Ok, I have the cursor now. But graphical response is extremely slow. Any
> > solution for that ?
>
> Turns out it's only running at 600Mhz right now, I just pushed a patch
> to fix it, and re-enable the 800Mhz/1Ghz options.
Op woensdag 13 november 2013 22:30:38 UTC+1 schreef Paulo Ferreira:
>
>
> On 13/11/2013, at 18:12, hvn...@gmail.com wrote:
>
>
> > I agree with you on the USB specifications. However, my point is that I
> ran the same software on both a normal computer and the Beagl
Op woensdag 13 november 2013 19:05:45 UTC+1 schreef RobertCNelson:
>
> > Ok, I have the cursor now. But graphical response is extremely slow. Any
> > solution for that ?
>
> Turns out it's only running at 600Mhz right now, I just pushed a patch
> to fix it, and re-enable the 800Mhz/1Ghz options.
Op donderdag 14 november 2013 15:36:42 UTC+1 schreef RobertCNelson:
>
> On Thu, Nov 14, 2013 at 2:20 AM, > wrote:
> > Op woensdag 13 november 2013 19:05:45 UTC+1 schreef RobertCNelson:
> >>
> >> > Ok, I have the cursor now. But graphical response is extremely slow.
> Any
> >> > solution for t
Op donderdag 14 november 2013 15:36:42 UTC+1 schreef RobertCNelson:
>
> On Thu, Nov 14, 2013 at 2:20 AM, > wrote:
> > Op woensdag 13 november 2013 19:05:45 UTC+1 schreef RobertCNelson:
> >>
> >> > Ok, I have the cursor now. But graphical response is extremely slow.
> Any
> >> > solution for t
Op donderdag 14 november 2013 15:36:42 UTC+1 schreef RobertCNelson:
>
> On Thu, Nov 14, 2013 at 2:20 AM, > wrote:
> > Op woensdag 13 november 2013 19:05:45 UTC+1 schreef RobertCNelson:
> >>
> >> > Ok, I have the cursor now. But graphical response is extremely slow.
> Any
> >> > solution for t
Op donderdag 14 november 2013 15:36:42 UTC+1 schreef RobertCNelson:
>
> On Thu, Nov 14, 2013 at 2:20 AM, > wrote:
> > Op woensdag 13 november 2013 19:05:45 UTC+1 schreef RobertCNelson:
> >>
> >> > Ok, I have the cursor now. But graphical response is extremely slow.
> Any
> >> > solution for t
Op vrijdag 15 november 2013 15:26:09 UTC+1 schreef RobertCNelson:
>
> > I wish I could edit my posts to change them for additions.
> > I'm trying to build a driver, and probably need linux-headers since I
> > already have build-essentials installed and I find that the installed
> kernel
> > 3.1
Op vrijdag 15 november 2013 15:58:28 UTC+1 schreef RobertCNelson:
>
> On Fri, Nov 15, 2013 at 8:43 AM, > wrote:
> > Op vrijdag 15 november 2013 15:26:09 UTC+1 schreef RobertCNelson:
> >>
> >> > I wish I could edit my posts to change them for additions.
> >> > I'm trying to build a driver, and
Hi,
Is there a way that I can keep using the serial UART after booting into
12.04armhf ? RIght now, it boots, shows boot info on the serial console and
DVI takes over. I want to be able to keep using the serial for in- and
output.
Thanks.
--
For more options, visit http://beagleboard.org/dis
Hi,
I built a new kernel for use with Ubuntu 12.04armhf (with patches) and
although it installed fine (synaptic shows it), it still boots the (old)
standard kernel. Since there's no GRUB, how can I change this ?
Thanks.
--
For more options, visit http://beagleboard.org/discuss
---
You receiv
Hi,
I patched a vanilla kernel for realtime and configured it for omap3 beagle.
However, after building it using make-kpkg with "DEB_HOST_ARCH=armhf
CLEAN_SOURCE=no fakeroot make-kpkg --arch=arm --subarch=omap3
--cross-compile=arm-linux-gnueabihf- --initrd --append-to-version
-xenomai-2.6.3-om
Op maandag 10 februari 2014 16:34:51 UTC+1 schreef RobertCNelson:
>
>
>
>
> On Sun, Feb 9, 2014 at 9:34 AM, > wrote:
>
>> Hi,
>>
>> I patched a vanilla kernel for realtime and configured it for omap3
>> beagle. However, after building it using make-kpkg with
>> "DEB_HOST_ARCH=armhf CLEAN_SOURCE=n
Op maandag 10 februari 2014 16:58:09 UTC+1 schreef RobertCNelson:
>
>
>
>
> On Mon, Feb 10, 2014 at 9:49 AM, > wrote:
>
>> Op maandag 10 februari 2014 16:34:51 UTC+1 schreef RobertCNelson:
>>
>>>
>>>
>>>
>>> On Sun, Feb 9, 2014 at 9:34 AM, wrote:
>>>
Hi,
I patched a vanilla kernel f
Op maandag 10 februari 2014 17:18:24 UTC+1 schreef RobertCNelson:
>
>
>
>
> On Mon, Feb 10, 2014 at 10:17 AM, > wrote:
>
>> Op maandag 10 februari 2014 16:58:09 UTC+1 schreef RobertCNelson:
>>
>>>
>>>
>>>
>>> On Mon, Feb 10, 2014 at 9:49 AM, wrote:
>>>
Op maandag 10 februari 2014 16:34:51 UTC
Op maandag 10 februari 2014 17:27:11 UTC+1 schreef RobertCNelson:
>
>
>
>
> On Mon, Feb 10, 2014 at 10:24 AM, > wrote:
>
>> Op maandag 10 februari 2014 17:18:24 UTC+1 schreef RobertCNelson:
>>
>>>
>>>
>>>
>>> On Mon, Feb 10, 2014 at 10:17 AM, wrote:
>>>
Op maandag 10 februari 2014 16:58:09 UT
Op maandag 10 februari 2014 17:32:46 UTC+1 schreef RobertCNelson:
>
>
>>>
>>>
I took vanilla kernel 3.5.7 because of a necessary patch that supports
this version. Is there any other kernel version you can recommend for
omap3
?
>>>
>>> v3.13.2 as it's the latest stable
Op maandag 10 februari 2014 17:56:41 UTC+1 schreef RobertCNelson:
>
>
>
>
> On Mon, Feb 10, 2014 at 10:48 AM, > wrote:
>
>> Op maandag 10 februari 2014 17:32:46 UTC+1 schreef RobertCNelson:
>>
>>>
>
>
>> I took vanilla kernel 3.5.7 because of a necessary patch that
>> supports
Op maandag 10 februari 2014 16:34:51 UTC+1 schreef RobertCNelson:
>
>
>
>
> On Sun, Feb 9, 2014 at 9:34 AM, > wrote:
>
>> Hi,
>>
>> I patched a vanilla kernel for realtime and configured it for omap3
>> beagle. However, after building it using make-kpkg with
>> "DEB_HOST_ARCH=armhf CLEAN_SOURCE=n
Hi,
After building a custom patched kernel for Ubuntu, it only installs partly.
The parts that are not taken care of by dpkg (creating new symbolic links
in /boot), I do manually. After reboot, the kernel gets loaded, but then
the system hangs: "Uncompressing Linux... done, booting the kernel."
Op vrijdag 25 oktober 2013 20:13:50 UTC+2 schreef RobertCNelson:
>
> On Fri, Oct 25, 2013 at 11:52 AM, >
> wrote:
> > I have CONFIG_NOP_USB_XCEIV=y, so it should be built in. Should I build
> it
> > as a module?
>
> Correct, build with
> CONFIG_NOP_USB_XCEIV=M
>
> as "CONFIG_NOP_USB_XCEIV=
Hi,
I may have looked at the wrong places, but is there a Beagle-xM patch for
the vanilla linux kernel ? So far I only find patches for the Beagle Bone,
which is certainly not the same. I've tried kernels 3.5.7, 3.8.13 and
3.10.18, configured them via oldconfig using a working armhf kernel 3.2.
Op vrijdag 7 maart 2014 09:06:02 UTC+1 schreef robert.berger:
>
> Hi,
>
> The latest and greatest ELDK 5.5 contains an ipipe patch for a 3.10.28
> kernel [1].
> Unfortunately 3.10 is not very stable on the beagle-xm and does not
> support rootfs over nfs. In case someone has 3.10.x with a working
Op maandag 17 maart 2014 08:40:48 UTC+1 schreef lisarden:
>
> http://eewiki.net/display/linuxonarm/BeagleBoard
>
>
> 2014-03-17 11:38 GMT+04:00 >:
>
>> Hi,
>>
>> I may have looked at the wrong places, but is there a Beagle-xM patch for
>> the vanilla linux kernel ? So far I only find patches for t
Op maandag 17 maart 2014 10:57:56 UTC+1 schreef lisarden:
>
> kernel does not care which rootfs you use
> ubuntu or debian rootfs images provided by RCN don't have GUI, but it can
> be easily installed by the following commands:
>
> sudo apt-get update
> sudo apt-get install lxde lxde-core lxde-ic
48 matches
Mail list logo