Under rmcm tab:
Contact Service Queues
Auto Work - enabled
on Agent Based Routing Settings
Auto Work - disabled
how does it work and which one takes precedence ?
___
For more information regarding industry leading CCIE Lab training, please visit
If I want Q1 to get 25 % BW, Q2 20%, Q3 40% and Q4 40%
srr-queue bandwidth share 25 20 48 7
srr-queue bandwidth shaped 33 0 0 0
As Shape takes precedence over Shared and if we set Shape to 0 for that
value, Share BW will be applied. Not sure if the above solution work ?
little correction .pls...
If I want Q1 to get 33 % BW, Q2 20%, Q3 48% and Q4 7%
srr-queue bandwidth share 25 20 48 7
srr-queue bandwidth shaped 33 0 0 0
On Wed, Apr 28, 2010 at 11:41 PM, vccie2010 vccie2...@gmail.com wrote:
If I want Q1 to get 25 % BW, Q2 20%, Q3 40% and Q4 40%
From QoS Entreprise 3.3
Campus QoS Design chapter:
CAT2970(config-if-range)# srr-queue bandwidth shape 3 0 0 0 !Q1 is
limited to 1/3 of the total available BW
CAT2970(config-if-range)# srr-queue bandwidth share 1 70 25 5 ! Q2 gets
70% of remaining BW; Q3 gets 25% and Q4
You're never going to get more than 100% bandwidth without upgrading your
link. :)
What you've got here is 3% (1/33 as shaped uses inverse logic), 32.3, 32.3,
32.3 as the 0 queues all share the remaining BW equally. That's all true
if my memory serves me correctly, anyhow.
Roger
On Thu, Apr 29,
Oops, Angel is right - I didn't notice your share command there (which
replaces the 32.3, 32.3, 32.3) with appropriate ratios.
Roger
2010/4/29 Angel Perez gorr...@hotmail.com
From QoS Entreprise 3.3
Campus QoS Design chapter:
CAT2970(config-if-range)# srr-queue bandwidth shape 3 0 0 0
Unfortunately I have 7962 phones in my lab and will appreciate if someone
can help me with with all tftp-server statements required on CME for a 7965
SIP and 7965 SCCP phones...
Appreciate your help on this...
thx / V
___
For more information regarding
These are the files on my Proctorlabs router:
103 2496963 Oct 19 2007 07:11:16 PHONE/7945-7965/apps45.8-3-2-27.sbn
104 585536 Oct 19 2007 07:11:14 PHONE/7945-7965/cnu45.8-3-2-27.sbn
105 2453202 Dec 18 2008 12:46:18 PHONE/7945-7965/cvm45sccp.8-3-2-27.sbn
106 326315 Oct 19 2007 07:11:18
Appreciate your reply on this... have some doubt ...
**you have assigned shape 3 for Q1 and Share 1 for Q1 - so in this case
why we need to have 1 on share ?
CAT2970(config-if-range)# srr-queue bandwidth shape 3 0 0 0 !Q1 is
limited to 1/3 of the total available BW
That helps a lot Roger. Appreciate it !!!
On Thu, Apr 29, 2010 at 12:05 AM, Roger Henderson rhender...@gmail.comwrote:
These are the files on my Proctorlabs router:
103 2496963 Oct 19 2007 07:11:16 PHONE/7945-7965/apps45.8-3-2-27.sbn
104 585536 Oct 19 2007 07:11:14
Hi all:
Yesterday I was trying to integrate UCM with AD, I get problems synchonizing
the users, any good resource for this?
THX
_
Hotmail: Trusted email with powerful SPAM
Hi, when you set 1 in share like share 1 x x x you are telling the switch
to take the shape value for this queue, 33% in the previous example
Date: Thu, 29 Apr 2010 00:08:24 -0700
Subject: Re: [OSL | CCIE_Voice] QoS on switch
From: vccie2...@gmail.com
To: rhender...@gmail.com
CC:
Hi Adam,
Thanks for your valubale informtion.
Thanks
Nataraj
On Wed, Apr 28, 2010 at 8:33 PM, Adam Thompson arthomp...@gmail.com wrote:
Nataraj,
I would recommend loading that SDI trace file into Cisco Voice Log
Translator (VLT) and select Detailed under Messages Translation. I
have found
I've found one:
http://docwiki.cisco.com/wiki/Corporate_Directory_Integration_with_Cisco_Unified_Communications_Manager
From: gorr...@hotmail.com
To: ccie_voice@onlinestudylist.com
Date: Thu, 29 Apr 2010 07:16:57 +
Subject: [OSL | CCIE_Voice] Active Directory
Hi all:
Yesterday I
Thx for your kind clarification, now if I have to also enable PQ will I have
to enable priority-queue out on the interface but in that case Q1 will
still be the PQ or there will be one more Q assigned but I think the port
only has 4 egress Qs ?
2010/4/29 Angel Perez gorr...@hotmail.com
Hi, when
Priority-queue out sets port 1 on the egress to be the priority queue. Only
queue 1 can be an egress priority queue on the 3750.
Roger
On Thu, Apr 29, 2010 at 5:27 PM, vccie2010 vccie2...@gmail.com wrote:
Thx for your kind clarification, now if I have to also enable PQ will I
have to enable
Perfect, so in a given scenario wher I have to assign particular percent of
BW and PQ to be Q1 the solution discussed here should work. Let me lab it
and update.
thx Angel and Roger
On Thu, Apr 29, 2010 at 12:29 AM, Roger Henderson rhender...@gmail.comwrote:
Priority-queue out sets port 1
Yes
vccie2010 take a look to Qos SRND Campus Qos Design Chaper 3750 subchapter
hth
Date: Thu, 29 Apr 2010 17:29:49 +1000
Subject: Re: [OSL | CCIE_Voice] QoS on switch
From: rhender...@gmail.com
To: vccie2...@gmail.com
CC: gorr...@hotmail.com; ccie_voice@onlinestudylist.com
Pardon my ingnorance, can;t seem to get to the link for CME 7.0 Admin Guide.
I am clikcing SupportConfigureProductsvocie and video comm IP Telephone
Call Control CME Configration Guide CME Admin Guide ( but this Admin
guide is 7.1 ) I am looking for CME 7.0 which I believe is the version in
Sure, will so Angelthx once again...
2010/4/29 Angel Perez gorr...@hotmail.com
Yes
vccie2010 take a look to Qos SRND Campus Qos Design Chaper 3750
subchapter
hth
--
Date: Thu, 29 Apr 2010 17:29:49 +1000
Subject: Re: [OSL | CCIE_Voice] QoS on switch
Hi:
from UCM gui web page click help and then contents
Date: Thu, 29 Apr 2010 00:40:50 -0700
From: vccie2...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Link to CME 7.0 Admin Guide
Pardon my ingnorance, can;t seem to get to the link for CME 7.0 Admin Guide.
I am looking for CME 7.0 please and not CUCM :)
On Thu, Apr 29, 2010 at 12:55 AM, Angel Perez gorr...@hotmail.com wrote:
Hi:
from UCM gui web page click help and then contents
--
Date: Thu, 29 Apr 2010 00:40:50 -0700
From: vccie2...@gmail.com
To:
Sorry ,
yes you are right that one seem to be the only one available from doc cd...
Date: Thu, 29 Apr 2010 00:58:52 -0700
Subject: Re: [OSL | CCIE_Voice] Link to CME 7.0 Admin Guide
From: vccie2...@gmail.com
To: gorr...@hotmail.com
CC: ccie_voice@onlinestudylist.com
I am looking
Hi:
I finally manage to solve this, the problem was LDAP Manager Distinguished Name
and LDAP User Search Base, this is the way it looks know:
LDAP Manager Distinguished Name: cn=Administrator,cn=Users,dc=cisco,dc=lab
LDAP User Search Base: cn=Users,dc=cisco,dc=lab
LDAP User Search
Same with me.
--
Dew Swen
CCVP, CCNP
29.04.2010 08:27, vccie2010 yazm?s,:
CCIE Voice Version 6 (CCIE v3 BP) Volume 1, Configs and Diagrams
https://www.ipexpert.com/member/downloads#
1. CCIE Voice: BLS Volume 1, Config Files, v6
I'll have our support team take a look at this.
Regards,
Wayne A. Lawson II - CCIE #5244 (RS)
Founder, President CEO - IPexpert, Inc., Proctor Labs, Inc.
Platinum Solutions Group, LLC.
Mailto: wlaw...@ipexpert.com
Telephone: +1.810.334.1564
eFax: +1.810.454.0130
::Message sent from
Hi vccie2010,
For UC side, while creating a new connection add the Local Extension what
provides what are you looking for.
From CUE side, I don't think that It is possibe. But the workaround is to
create a Public Distribution List with the remote user number that you want to
dial by
I ran into this the other day and emailed support, they said the file
expired. After emailing, magically a new category at the top of the
downloads page appeared and I could download the configs again. Just
send an email and you should be set.
On Thu, Apr 29, 2010 at 7:19 AM, Wayne Lawson
FYI, here's a very helpful link to find exactly which load files are
included on all CME versions:
Cisco Unified CME 7.0(1) Supported Firmware, Platforms, Memory, and
Voice Products
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/c
me701spc.htm
(this is for CME v7.0(1)
Thanks Wayne !!! Appreciate it.
thanks all for yoru help as well.
On Thu, Apr 29, 2010 at 6:55 AM, Tanner Ezell tanner.ez...@gmail.comwrote:
I ran into this the other day and emailed support, they said the file
expired. After emailing, magically a new category at the top of the
downloads
Thank you Steve, you rock !!!
On Thu, Apr 29, 2010 at 8:41 AM, Steve Denney (stdenney) stden...@cisco.com
wrote:
FYI, here’s a very helpful link to find exactly which load files are
included on all CME versions:
Cisco Unified CME 7.0(1) Supported Firmware, Platforms, Memory, and Voice
I get an error contact system administrator when I select Directories button
than Personal Directory or Corporate Directory for that matter. (no ldap
synchronization in place. Users have been added locally in UCM)
I have the URL from PUB to IP address for all services under Enterprise
Thanks Sergio, I will try that and update.
Vik, Otto or Amy ( anyone from IPX ) - what are your recommendation please ?
thx for your help
On Thu, Apr 29, 2010 at 6:45 AM, Sergio Polizer spoli...@hotmail.comwrote:
Hi vccie2010,
For UC side, while creating a new connection add the Local
Glad to know that it worked for you Angel
On Thu, Apr 29, 2010 at 1:09 AM, Angel Perez gorr...@hotmail.com wrote:
Hi:
I finally manage to solve this, the problem was LDAP Manager Distinguished
Name and LDAP User Search Base, this is the way it looks know:
LDAP Manager Distinguished
Try this out...might be helpful
Thanks, I did read that but does not help.
From: vccie2010 [mailto:vccie2...@gmail.com]
Sent: Thursday, April 29, 2010 10:36 AM
To: Jeff Cotter
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] UCM Personal Directory Error
Try this out...might be helpful
try restarting Cisco Tomcat service
On Thu, Apr 29, 2010 at 10:38 AM, Jeff Cotter jcot...@voxns.com wrote:
Thanks, I did read that but does not help.
*From:* vccie2010 [mailto:vccie2...@gmail.com]
*Sent:* Thursday, April 29, 2010 10:36 AM
*To:* Jeff Cotter
*Cc:*
I am trying to open .aef file on CRS edittor, when I open the file, CRS
Editor prompts for user name, pass and IP for server. I tried with
annonymous and other regular usrname but no luck.am I missing somehing
hereI remeber I was able to login offline on CRS editor with u/p -
annonymous/
Jeff -
Use the username and password that is used to login to AppAdmin. Pay
attention! The login is case-sensitive. If AppAdam/CUCM sees your login ID as
JCotter, you better enter it exactly (jcotter will not work).
There should be a button on the login screen to login anonymously. Really
no luck tired with AppAdmin and Annonymous
On Thu, Apr 29, 2010 at 11:02 AM, Berry, Matthew J.
mjbe...@krollontrack.com wrote:
Jeff –
Use the username and password that is used to login to AppAdmin. Pay
attention! The login is case-sensitive. If AppAdam/CUCM sees your login ID
as
If using PL, did you try admin and c1sc0123?
From: vccie2010 [mailto:vccie2...@gmail.com]
Sent: Thursday, April 29, 2010 1:20 PM
To: Berry, Matthew J.
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Unable to open .aef file on CRS editor
no luck tired with AppAdmin and
In no situation should you not be able to login anonymously, is the
software installed locally? Check the logs.
On Thu, Apr 29, 2010 at 2:22 PM, Berry, Matthew J.
mjbe...@krollontrack.com wrote:
If using PL, did you try admin and c1sc0123?
From: vccie2010 [mailto:vccie2...@gmail.com]
Sent:
Graham -
This is what I noticed during that lab. Under the Manager/Assistant
configuration screen there is the option to define intercom numbers. If
you leave that drop-down field as Unassigned, when you login to IPMA
the name will not change. However, if you specify an intercom in that
Tanner -
You're allowed to launch the CRS Editor in anonymous mode. I think what
Jeff is trying to do is login to that app for the purpose of reactive
debugging.
*Matthew Berry*
/A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Voice Written/
*_Vitals:_*
*GVoice: *+1.612.424.5044
*Gmail*:
Matthew,
thanks for that.
Graham
On 29 Apr 2010, at 19:34, Matthew Berry ciscovoiceg...@gmail.com
wrote:
Graham -
This is what I noticed during that lab. Under the Manager/Assistant
configuration screen there is the option to define intercom
numbers. If you leave that drop-down
I bet you love Java even more.. ugh. Sadly there is no way around that
requirement for the CRS Editor.
For the curious:
UCCX Scripts are simply serialized java code that is fed into the
platform, deserialized and executed. This is annoying for a couple
reasons, one, it requires that you have the
Yes, that is what I was suggesting. At no point should you not be able
to login anonymously (locally). Unless of course, the software is
crap.
On Thu, Apr 29, 2010 at 2:35 PM, Matthew Berry ciscovoiceg...@gmail.com wrote:
Tanner -
You're allowed to launch the CRS Editor in anonymous mode. I
Mathew, If you don't define Intercom under Manager configs , does your
intercom still work in IPMA mode while both Mgr and Asst are logged in?
Could you please validate for us.
thx
On Thu, Apr 29, 2010 at 11:38 AM, Graham Hopkins
ghopk...@wolf-rock.co.ukwrote:
Matthew,
thanks for that.
It'd be nice to have a Windows 7 compatible version too!
*Matthew Berry*
/A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Voice Written/
*_Vitals:_*
*GVoice: *+1.612.424.5044
*Gmail*: ciscovoiceg...@gmail.com
*Skype*: ciscovoiceguru
*Twitter*: ciscovoiceguru
*_Cert Stats:_*
Cisco Cert Journey
It does still work. I don't have time to validate right now. However,
the PG shows how to set this up without associating the intercom line.
Good luck!
*Matthew Berry*
/A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Voice Written/
*_Vitals:_*
*GVoice: *+1.612.424.5044
*Gmail*:
That's a version related error. Are you using the CRS editor as downloaded
directly from the server?
On Thu, Apr 29, 2010 at 2:57 PM, vccie2010 vccie2...@gmail.com wrote:
And I am getting this error (attached) now opening the IPX .aef file for
Vol2Lab10-solution.aef seems like what you said
Yes plsI am going to lab tonigh on IPX and will download it again and
update here pls
On Thu, Apr 29, 2010 at 12:05 PM, Tanner Ezell tanner.ez...@gmail.comwrote:
That's a version related error. Are you using the CRS editor as downloaded
directly from the server?
On Thu, Apr 29, 2010 at
Jeff,
Glad to know that. I took that you had changed that one already since I
ALWAYS change Server name to IP address as first step [?] as with hostname it
causes lots of issues...
On Thu, Apr 29, 2010 at 12:19 PM, Jeff Cotter jcot...@voxns.com wrote:
Had to change the name of server to IP
thx Mathew, that helps...
On Thu, Apr 29, 2010 at 11:46 AM, Matthew Berry ciscovoiceg...@gmail.comwrote:
It does still work. I don't have time to validate right now. However, the
PG shows how to set this up without associating the intercom line.
Good luck!
*Matthew Berry*
*A+, CCENT,
Yup, never, ever, use hostnames. In fact, disable DNS entirely on the UCM.
It's very rare to have a need to use DNS in a UC environment.
On Thu, Apr 29, 2010 at 3:26 PM, vccie2010 vccie2...@gmail.com wrote:
Jeff,
Glad to know that. I took that you had changed that one already since I
ALWAYS
Hi Amy, Matthew, Amp
I tried VoiceView CUE/CUCM today and it worked.
I had missed the step 3.
1. Added Voiceview as a phone service (Service url:
http://10.10.202.2/voiceview/common/login.do)
2. Applied
service to the appropriate phone and reset phone
3.
Associated phone as a controlled
It¹s not possible to send to remote user extension without specifying
location id- spell the name instead or PDL. Thanks Sergio.
--
Vik Malhi CCIE #13890
Instructor - IPexpert, Inc.
Mailto: vma...@ipexpert.com
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Live Assistance, Please visit:
PSTN RTR is NTP Master on EST - 5
HQ config - clock timezone PST -8
ntp source lo0
ntp server PSTN RTR IP
HQ-RTR#sh ntp ass
address ref clock st when poll reach delay offset
disp
*~10.10.100.2 127.127.7.1 4 564
Perfect !!! That helps Vik.
My wish list [?] Please add this in your next PG solution for l1b2 Q 8.3
thx once again...
On Thu, Apr 29, 2010 at 1:14 PM, Vik Malhi vma...@ipexpert.com wrote:
It’s not possible to send to remote user extension without specifying
location id- spell the name
You can download the CME Admin Guide for 7.0(1) here.
http://files.me.com/malhiv/038s5t
--
Vik Malhi CCIE #13890
Instructor - IPexpert, Inc.
Mailto: vma...@ipexpert.com
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Live Assistance, Please visit: www.ipexpert.com/chat
Thanks Vik !!!
On Thu, Apr 29, 2010 at 2:47 PM, Vik Malhi vma...@ipexpert.com wrote:
You can download the CME Admin Guide for 7.0(1) here.
http://files.me.com/malhiv/038s5t
--
Vik Malhi – CCIE #13890
Instructor - IPexpert, Inc.
Mailto: *vma...@ipexpert.com
*Telephone: +1.810.326.1444
PSTN RTR is NTP Master on EST - 5
HQ config - clock timezone PST -8
ntp source lo0
ntp server PSTN RTR IP
HQ-RTR#sh ntp ass
address ref clock st when poll reach delay offset
disp
*~10.10.100.2 127.127.7.1 4 564
cue# $cue-vm-license_12mbx_cme_7.0.1.pkg username ipexpert pass cisco
WARNING:: This command will install the necessary software to
WARNING:: complete a clean install. It is recommended that a backup be done
WARNING:: before installing software.
Would you like to continue? [n]yes
Downloading
Can you try cisco/cisco
--
Vik Malhi CCIE #13890
Instructor - IPexpert, Inc.
Mailto: vma...@ipexpert.com
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Live Assistance, Please visit: www.ipexpert.com/chat
http://www.ipexpert.com/chat
IPexpert is a premier provider of Self-Study Workbooks,
You are the man, Vik :)
I wish I had tried that :( but I was just going by your email link here...
http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg13105.html
On Thu, Apr 29, 2010 at 4:59 PM, Vik Malhi vma...@ipexpert.com wrote:
Can you try cisco/cisco
--
Vik Malhi – CCIE
Guys,
I'm building my own lab and not sure which ip address should I use
to add the BR1 router as SRST since there is no Ethernet address available
based on the design. Should I create a loopback? or use the voice vlan address?
Please advise. Thanks in advance.
It was late when I set up the FTP server:-( if in doubt go cisco.
Vik Malhi - CCIE#13890
Senior Technical Instructor - IPexpert Inc
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: vma...@ipexpert.com
Join IPexpert's Free CCIE Peer Groups Study Communities at
Sergio,
This is what I get when trying to send VM from HQ to BR2 (Unity to CUE).
when using PDL ...
cue# sh trace buffer tail
Press CTRL-C to exit...
8074 04/30 11:19:46.314 netw smtp 5 221 closing channel
5863 04/30 11:21:08.336 netw smtp 2
5863 04/30 11:21:08.364 netw smtp 3 socket hostName:
So the domain name defined in the unity location within cue should be
cuc7-pub. Is that the case? It must match the domain name of the sender.
Vik Malhi - CCIE#13890
Senior Technical Instructor - IPexpert Inc
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: vma...@ipexpert.com
Join
Vik,
That could be the case, I was just following the IPX PG solution which I
believe needs lillte correction with regard to these things.
- V
On Thu, Apr 29, 2010 at 9:48 PM, Vik Malhi vma...@ipexpert.com wrote:
So the domain name defined in the unity location within cue should be
70 matches
Mail list logo