Re: [OSL | CCIE_Voice] 9971 IP phones

If you can order the NFR kit is is pretty perfect for a lab environment. On Fri, May 30, 2014 at 11:20 AM, Kaloudis, Bill < bill.kalou...@kavokerrgroup.com> wrote: > Any advice on how to handle the licensing of the 9.x uc (cucm, sme, unc, > ccx, cup) as well as video (vcs) applications? What wo

Re: [OSL | CCIE_Voice] 9971 IP phones

hello All, You might consider the 9951 instead of the 9971 as I believe the only difference is the touch screen. On Fri, May 30, 2014 at 10:24 AM, Bill Hatcher wrote: > I was at Cisco Live this last week, and had the honor to attend the CCIE > Collaboration Techtorial with Ben Ng. During one

Re: [OSL | CCIE_Voice] FXO revisited

; > do a packet capture on the router during the disconnect , analyse the > signal using Audacity and get the cadence and frequency > > or get the capture send it to Cisco TAC and then they will get you the > cadence and the frequency > > Regards > Moataz > > *From:* Bi

[OSL | CCIE_Voice] FXO revisited

Hi All, Just wanted to let you know I think I know why it does not work. Here is what the carrier sent me switch goes through the timeout sequence the first tone, the 480, goes for 60 seconds and then the 620 is overlayed onto the 480 and both tones are sent for another 60 seconds. There is not

[OSL | CCIE_Voice] FXO issue

Hi guys, Sorry as I know FXO ports are not covered in the exam anymore but I have a goofy issue I was hoping for insight into. Call arrives FXO to CUE AA, it is then sent back out FXO port to answering service after hours or when site is busy during the day. Issue is the calls never disconnect.

Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 97, Issue 8

o > 4040 20017 0no > 7400 20009 57 no > 7600 10 23 no > 9* 70 23 no > > > > -Original Message

Re: [OSL | CCIE_Voice] RIP CCIE-Voice :-)

Really on an IPExpert board? Bill Sent from my iPhone On Feb 14, 2014, at 11:12 AM, lephud...@gmail.com wrote: > I'm waiting the ine workbook collaboration > > Sent from my BlackBerry 10 smartphone. > From: Abel Mateo > Sent: Friday, 14 February 2014 10:32 > To: m george > Cc: ccie_voice@onlin

Re: [OSL | CCIE_Voice] RIP CCIE-Voice :-)

For those that passed the beast it was not so much nonsense. On Thu, Feb 13, 2014 at 4:04 PM, Nicolas MICHEL wrote: > I am happy about that ... Thé exam was complete nonsense > > Sent from my iPad > > On 13 févr. 2014, at 22:07, Leslie Meade wrote: > > Snif snif... > > > > > > > > *Leslie Mea

Re: [OSL | CCIE_Voice] wireshark capture analysis

Wireshark filters attached try ip.addr==192.168.1.254 (or your IP) to filter by IP On Sat, Jan 18, 2014 at 8:17 PM, virajith wrote: > Hello Guys, > > I have collected a Packet capture ( wireshark) from a cisco CME . I need > to know following :- > > > 1) The filters used on wireshark to see

Re: [OSL | CCIE_Voice] Lab Flavors

ich is just as bad when your stomach is in knots. > In San Jose we went to the cafeteria and I had salad. Much better, and I > passed. > > > On Dec 16, 2013, at 12:37 PM, Bill Lake wrote: > > Bring lunch just in case you get salmon patties > > > > *From:*

Re: [OSL | CCIE_Voice] Lab Flavors

Bring lunch just in case you get salmon patties From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Brad Williams Sent: Monday, December 16, 2013 11:35 AM To: Wayne Lawson Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] La

Re: [OSL | CCIE_Voice] CCIE Lab Prep via VMware

Well, I found using ESXi and creating a lab workstation as one of my VM's worked well. I setup with a remote access client and I had access to my lab from anywhere and from any device supported by my client. This was very helpful and you don't need a full blown server (I have a Intel i5 with desk

Re: [OSL | CCIE_Voice] have the navigation links to the docs on cisco.com changed?

I believe the SRND is on the desktop but while I know CUCM was cant be sure is CME is Bill Sent from my iPhone On Oct 14, 2013, at 9:59 AM, "virajith " wrote: > hi Guys, > > I was practicing the lab exercises today . When I was trying to configure > BACD I went to the cisco product link for

Re: [OSL | CCIE_Voice] End User to Device Association

Does anyone know a good source for these type of searches or a good way to create them? Bill Sent from my iPhone On Oct 12, 2013, at 11:40 AM, Martin Sloan wrote: > Hey Ryan, > > So the query isn't super simple but it's definitely something you could > memorize for a quick look at user/devi

Re: [OSL | CCIE_Voice] MVA confusion and quesiton

On Number 2 you should remember in 7.0.x there is a bug with partial match and you might not want to risk hitting it Bill Sent from my iPhone On Oct 7, 2013, at 7:43 AM, Martin Sloan wrote: > Hi Ramesh, > > Here's some answers based on my approach to configuring MVA. > > 1) I would use the

Re: [OSL | CCIE_Voice] Is the CCIE voice worth anymore?

As a former big Telco employee, they want three things: Stability Scalability Profitability At this time these applications are not there. On Thu, Aug 29, 2013 at 6:45 AM, Bill Lake wrote: > As a former big Telco employee, they want three things: > Sta

Re: [OSL | CCIE_Voice] Is the CCIE voice worth anymore?

As a former big Telco employee, they want three things: Stability Scalability On Thu, Aug 29, 2013 at 6:30 AM, Drake J wrote: > > > hi Laksh, > > Thanks for your inputs here.This was a good discussion. It is always > good for us to all know about things that happen outside . T

Re: [OSL | CCIE_Voice] CUE problem

Are the passwords correct on cue? You can reset them vie CLI or GUI Bill Sent from my iPhone On Jul 31, 2013, at 11:26 AM, sanity insanity wrote: > typo : point 2 :- 2) The ports and cti route points are correctly added under > application user . The same is mention in the cue cli > > > O

[OSL | CCIE_Voice] Webapp Timeout

someone asked but I did not see the email when I went to reply set webapp session timeout This command sets the time, in minutes, that can elapse before a web application, such as Cisco Unified Communications Manager Administration, times out and logs off the user. For the new webapp session time

Re: [OSL | CCIE_Voice] GW config

configuration mode. > > Practically i don't notice any difference in order . > Whether i add or not , Alerting message is always send before connect in > my lab. > So i am confused. > > Thanks > > > > On Sun, Jul 21, 2013 at 6:43 AM, Bill Lake wrote: > >> Can you

Re: [OSL | CCIE_Voice] GW config

Can you use google? Sent from my iPhone On Jul 20, 2013, at 7:22 PM, IE Target wrote: > Hi GUYS > > Can AnyOne explain the purpose of these command > i.e what happens when we add them/remove them > > isdn bchan-negotiat > isdn sending-complete > isdn send-alerting > > Thanks > > ___

Re: [OSL | CCIE_Voice] MGCP TroubleShooting

My guess is that they want you to know that MDCX is hey the is a change coming DLCX is hey the change I warned you about is disconnect. AUEP, AUCX, CRCX, DLCX, EPCF, MDCX, NTFY, RQNT, RSIP AUEP - Audit Endpoint AUCX - Audit Connection CRCX - Create Connection DLCX - Delete Connection MDCX

Re: [OSL | CCIE_Voice] (no subject)

No you will still be a CCIE You will just be in a retired track You will be able to upgrade to CCIE collaboration by passing the CCIE collaboration written exam Good luck on you lab Sent from my iPhone On Jul 8, 2013, at 12:22 PM, Dharambirku wrote: > Hi > i am going for ccie voice lab in

Re: [OSL | CCIE_Voice] Can I use 1 single T1 line for voice and data at the same time?

hat if you have the same service provider you can make T1 Line can > work as backup for SIP but I don't know if that will work out on different > providers? > > Thanks, > > > On 3 July 2013 10:51, Bill Lake wrote: >> You can run voice over a data t1 from most prov

Re: [OSL | CCIE_Voice] Can I use 1 single T1 line for voice and data at the same time?

You can run voice over a data t1 from most providers. This could be as a sip or h323 trunk (perhaps other ways too) My recommendation is to get one with QoS that matches your needs Sent from my iPhone On Jul 3, 2013, at 12:09 PM, Hesham Abdelkereem wrote: > Dear Experts, > > Can I use sing

Re: [OSL | CCIE_Voice] Translation-rule help

Um, not sure why you are making this so complicated SiteC-RTR(config)#voice translation-rule 8 SiteC-RTR(cfg-translation-rule)#rule 1 /^9/ // SiteC-RTR(cfg-translation-rule)#do test voice translation-rule 8 95551234 Matched with rule 1 Original number: 95551234 Translated number: 5551234 Ori

Re: [OSL | CCIE_Voice] Gatekeeper is unable to reach SiteB under Call Forward UnRegister

Calls work when he is not in SRST so 3... must be sending to CUCM to be processed and set to phones at site B. They are registered and work but when unregistered they fail to work. If we are going on this little snippet of his GK config we might need the entire thing and those on the GW's to figu

Re: [OSL | CCIE_Voice] not able to login cupc

Run the CUPS system troubleshooter and it can be very helpful If that shows all good try restarting CUPS server Third issue is find the fix on Cisco's website at (might want to learn to find this page) http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a008088cff0.shtm

Re: [OSL | CCIE_Voice] UCM DHCP

So you see the request coming into the server but the phone never gets them back? Can you ping the voice vlan from the server? On Sat, Jun 22, 2013 at 3:05 PM, Somphol Boonjing wrote: > Hi Anuritha, > > The screenshot is useful. The 4 parameters in the bottom of the screen > must be set. O

Re: [OSL | CCIE_Voice] B-ACD

anks > > > > On Sat, Jun 22, 2013 at 1:48 PM, Bill Lake wrote: >> If it is showing up in the running configuration, then you most likely see >> something like below, the best way to remove this is to no the commands >> >> Or to have done a Archive or copy of

Re: [OSL | CCIE_Voice] B-ACD

If it is showing up in the running configuration, then you most likely see something like below, the best way to remove this is to no the commands Or to have done a Archive or copy of the config before you apply it. then restore that config as the startup and reboot. application * service app-b

Re: [OSL | CCIE_Voice] SRST checklist

You might also need to match the softkeys on the phones in SRST to those when registered to CUCM On Sat, Jun 22, 2013 at 4:52 AM, Somphol Boonjing wrote: > To add to the list: > > - music-on-hold matching that of CUCM if applicable (i.e. in a situation > where the file is provided) > - secondar

Re: [OSL | CCIE_Voice] Change B-Channel Maintenance Status

I would do the config manually on the gateway and not worry about this in the real world Sent from my iPhone On Jun 16, 2013, at 4:25 PM, Karen Johnson wrote: > when do MGCP, i come across service parameter "Change B-Channel Maintenance > Status" and they only have 5 box. > > - does that me

Re: [OSL | CCIE_Voice] H323 Gateway for POTS with CUCM issue

Do you think sharing your config might help? On Sun, Jun 16, 2013 at 10:51 AM, Hesham Abdelkereem < heshamcentr...@gmail.com> wrote: > Dear All. > > I have configured H323 Gateway to use the 4 FXO ports on the router with > CUCM. > When I call in to the POTS line sometimes its working perfectly

Re: [OSL | CCIE_Voice] Ringlist not updated

So how do you create the Ringlist.xml? do you also ensure that you use the exact format of the name (not ringlist.xml) and do you confirm that it is correct on the CUCM-PUB-SUB? So my method for doing this would be to ssh into the CUCM Type: admin:file dump tftp Ringlist.xml I then capture thi

Re: [OSL | CCIE_Voice] ip pblue multilab version..

You have to manually change the MAC addresses on the loopback adapters you created, I think the first one create ends with 50, so I tend to change it to 51, 52, 53, ... as needed. Bill On 6/14/13, Amit Sharma wrote: > Hello guys.. > i have multi lab version and try to sue with cucm > I want

Re: [OSL | CCIE_Voice] CUCM GK Port Number

#x27;s only one way to interpret. > > Thanks, > Marty > > > On Thu, Jun 13, 2013 at 6:52 PM, Bill Lake wrote: >> Marty, >> >> You got to the first column and select System parameters then scroll Dow the >> the H323 section and there will be your 17

Re: [OSL | CCIE_Voice] CUCM GK Port Number

Marty, You got to the first column and select System parameters then scroll Dow the the H323 section and there will be your 1720 and there you will put the name of the gk trunk setup in your trunk config Reset the trunk and it should start using 1720 Sent from my iPhone On Jun 13, 2013, at 4:

Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM

om:* Randall Crumm > *To:* Karen Johnson ; Pavan K < > pav.c...@gmail.com> > *Cc:* "ccie_voice@onlinestudylist.com" ; > Bill Lake > *Sent:* Thursday, June 13, 2013 10:51:52 AM > *Subject:* Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from > UCM > &g

Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM

nes as the right model and firmware? Bill Sent from my iPhone On Jun 12, 2013, at 3:18 PM, Karen Johnson wrote: > hi Bill, > > yes i got it from SC router, and i tried to ping UCM as well from the voice > int vlan of SC and it works for the ping. but still not get the DN >

Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM

Ps do any phones register? Sent from my iPhone On Jun 12, 2013, at 3:18 PM, Karen Johnson wrote: > hi Bill, > > yes i got it from SC router, and i tried to ping UCM as well from the voice > int vlan of SC and it works for the ping. but still not get the DN > > k > &g

Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM

Where are you getting your dhcp at sc? If it is sc rtr then you could have it right and just no access to CUCM So try ping (CUCM ip) source vlan (voice #) and confirm the voice vlan has connectivity to CUCM Sent from my iPhone On Jun 12, 2013, at 11:29 AM, Karen Johnson wrote: > > hi all,

Re: [OSL | CCIE_Voice] switch- spanning tree portfast

My experience using the access port method with ESW and the version of IOS on the lab is that it is possible to get three results. One, it works perfectly. Two, it works at first but then fails sometime later (most likely when the proctor grades your lab). Finally, it will not work at all, the i

Re: [OSL | CCIE_Voice] RSVP Problem

Hi Marty, That is a great lesson for you, the more you practice this stuff, the more you learn what can go wrong, how to ID it and fix it fast. Bill On Mon, Jun 10, 2013 at 12:01 PM, Martin Sloan wrote: > Suresh, > > Thank you for the help! I did have the 'ip rsvp bandwidth' setting under > t

Re: [OSL | CCIE_Voice] how can add multiple ipblue from my pc to remote labs

create multiple loopback adaptors, one for each phone, incrementing the last digit by one. On Sun, Jun 9, 2013 at 11:02 AM, Amit Sharma wrote: > Hello guys... > i tried to use loop back adapter to register ipblue with remote lab but it > is working for 1 phone in 1 time... > can someone tell

Re: [OSL | CCIE_Voice] H323 trunk no PLUS in EPNM

You really need to read and practice this a lot as there are several ways to do it. I like to use voice translations and I tend to do everything on the gateway. so an example of this would be adding the + to all international calling voice translation-rule 4 rule 1 /^4...$/ /+155\0/ now tes

Re: [OSL | CCIE_Voice] H323 trunk no PLUS in EPNM

H323 strips the + by default To add it you will do so on the gateway Sent from my iPhone On Jun 6, 2013, at 4:06 PM, Karen Johnson wrote: > hi, > > I set up H323 trunk from UCM to my PSTN router (as H323 GW) > > - EPNM : +15052022XXX > - RP : check "Use calling party Ext Mask" > > But

Re: [OSL | CCIE_Voice] Lab strategy

Ok my last email got sent back Where are you taking your lab? That has to play into your plan in taking the lab. I took my lab at RTP, my plan was to use the device base approach. 1) I reviewed the outline of the lab, looking for very specific things throughout the lab that required early planni

Re: [OSL | CCIE_Voice] Cisco: Provide a reasonable transition path from CCIE Voice to CCIE Collaboration

This is the post on Cisco website. https://learningnetwork.cisco.com/docs/DOC-20968 I hope my argument helped and I want to thank all those that spent an equal and thoughtful amount of time on this. Success only means we get a reasonable path to migration and I believe this should be considered

Re: [OSL | CCIE_Voice] Lab strategy

Where are you taking your lab? That has to play into your plan in taking the lab. I took my lab at RTP, my plan was to use the device base approach. 1) I reviewed the outline of the lab, looking for very specific things throughout the lab that required early planning. An example of this would

Re: [OSL | CCIE_Voice] FTP from CUE failed

It should not be a VMware setting Where are you running the FileZilla server? Can the cue ping the ip of this and do you see the packets actually get to this server? What version of windows are you running the FileZilla on? What is the host system? Can you post your configs of the br2 and 37

Re: [OSL | CCIE_Voice] H323 fast start question

Um, if a question says to prove CUCM is using some feature, I would suggest using the CUCM logging system to prove it. I doubt that they will accept a Gateway debug as proof of CUCM using some protocol or features. On Tue, Jun 4, 2013 at 11:40 AM, Barrera, Hugo wrote: > I used h225/h245 asn1 t

Re: [OSL | CCIE_Voice] FTP from CUE failed

Start with the simple stuff, can you ping the FTP server from the CUE module? Can you ping the CUE from the FTP server? My guess is one or both of these will not work but let us know On Tue, Jun 4, 2013 at 11:42 AM, Karen Johnson wrote: > hi all, > > When i try to install license from FTP to

Re: [OSL | CCIE_Voice] CCIE Collaberation

Right you can continue to pass written exams and prove you are current with technology. But what will you do when you apply for a job that requires or desires CCIE Collaboration? CCIE voice will join the CCIE's of the pass that were retired, you will still be a CCIE but you will be considered les

Re: [OSL | CCIE_Voice] IE voice retired

That is good, now what is the value of CCIE ISP Dial when he goes for another job? Or how about when a customer asks specifically do you have a CCIE Collaboration? There is also a huge difference between the retired CCIE ISP dial and Voice; ISP dial is untenable as a CCIE track it has been repla

Re: [OSL | CCIE_Voice] ringlist questions

You might want to review these guides http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/6921_6941_6961/8_5/english/admin_guide/6921cus.pdf http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm.html SUMMARY STEPS * 1. *Create PCM file. * 2. *Edit RingList.xml an

Re: [OSL | CCIE_Voice] CCIE Voice Retirement

rate simulations into either exam type that would ensure that those who have earned their CCIE voice are keeping up with technology. That is what this change to CCIE Collaboration is about, better reflecting the requirements in the field and the technology we deal with. Sincerely, Bill Lake O

Re: [OSL | CCIE_Voice] DHCP static mapping

You might want to try going to http://www.cisco.com/cisco/web/psa/default.html products Cisco IOS and NX-OS software Cisco IOS Cisco IOS 12.4 family Cisco IOS software release 12.4T Configuration guides IP Addressing: DHCP Configuration Guide, Cisco IOS Release 12.4T

Re: [OSL | CCIE_Voice] CCIE Collaboration officially announced

es between the two. > > > > > On May 29, 2013, at 7:10 AM, Bill Lake wrote: > >> Ranting about it won't change anything. I read on line that when they >> retire your CCIE, you can still renew by passing a CCIE level written or >> lab. If this is true then

Re: [OSL | CCIE_Voice] CCIE Collaboration officially announced

Ranting about it won't change anything. I read on line that when they retire your CCIE, you can still renew by passing a CCIE level written or lab. If this is true then you do not loose your CCIE just the voice tag. That seems to be a difficult pill to swallow but it would not be the first from

Re: [OSL | CCIE_Voice] OWLE Lab 1 7.2 Cannot connect to the IP Phone Agent

. When I > tried to manually start the Cisco Desktop Sync Service to stops > immediately. Thanks. > > > On Sun, May 26, 2013 at 12:55 PM, Bill Lake wrote: > >> What is the URL you are using for the service >> >> Is the I UCCX in service or partial? >> >

Re: [OSL | CCIE_Voice] OWLE Lab 1 7.2 Cannot connect to the IP Phone Agent

he icd application and the > trigger works properly (2700) as well. CTI route point and CTI ports are > registered. But I'm still having difficulty getting the phone agents to > login. Thanks for any ideas you might have. > > > On Sun, May 26, 2013 at 10:25 AM, Bi

Re: [OSL | CCIE_Voice] OWLE Lab 1 7.2 Cannot connect to the IP Phone Agent

Hello Ryan Is the enterprise parameters showing Auto Attendant Installed [image: Required Field] false IPCC Express Installed [image: Required Field] false This is sometimes the case and you can resolve it here http://www.cisco.com/en/US/partner/products/sw/custcosw/ps1846/products_tech_no

Re: [OSL | CCIE_Voice] proctorlabs replication

to confirm CSA or Cisco Security Agent you would use the command utils csa status, to disable it you would use utils csa disable On Thu, May 23, 2013 at 3:20 PM, Karen Johnson wrote: > u mean "show utils service " ? > > *From:* CCIEing > *To:* Karen Johnson > *Cc:* "ccie_voice@onlinestudylis

Re: [OSL | CCIE_Voice] tranfer to Voicemail button for CME - CUE

There is always more than one way to complete this type of task but for me the use of voice translations was the most flexible and effective. That said, having more tools in mental tool box never hurts. Bill On Wed, May 22, 2013 at 1:16 PM, William Bell wrote: > I haven't tried Kirill's met

Re: [OSL | CCIE_Voice] tranfer to Voicemail button for CME - CUE

I think you might need to strip the * off as you send it to CUE do it on the CUE dial sip dial peer with a voice translation On Wed, May 22, 2013 at 8:45 AM, sanity insanity < networksanitytoinsan...@gmail.com> wrote: > hi All, > > I have the following config > > ephone-dn 3 > number 400

Re: [OSL | CCIE_Voice] ssh client

I just did a google search for SecureCRT 3 and scrollback and got this, can't vouch for it but basically you just log the session or increase the buffer The number of lines that the scrollback buffer in SecureCRT can be increased to allow more lines to be saved. The 'Scrollback buffer' setting is

Re: [OSL | CCIE_Voice] MRG for MTP, SIP Early Offer

Early offer requires media resources Delayed offer does not require it SIP Early Offer Support over Unified CM SIP Trunks SIP negotiates media exchange by means of the Session Description Protocol (SDP), where one side offers a set of capabilities to which the other side answers, thus converging

Re: [OSL | CCIE_Voice] Mgcp

Try RTR#show ccm-manager MGCP Domain Name: RTR On Sun, May 12, 2013 at 3:38 AM, Ravindra Lakpriya wrote: > if you want to see the domain information just execute > > sh run | i domain > > On Sun, May 12, 2013 at 12:01 PM, Dharambir kumar varma < > dharambi...@gmail.com> wrote: > >> Hi >> Someo

Re: [OSL | CCIE_Voice] How to configure ringlist for a specific phone in CUCM?

Could you manually set the phone to an alternative tftp server with all the files copied over and do it that way? OK so who would want to do that in a lab? Not me, would it be possible, yeah maybe, would it be worth a few points, um I don't think it would be worth the points it takes to configure

Re: [OSL | CCIE_Voice] h323 fast start

try this http://ciscovoip-amitr.blogspot.com/2011/04/fast-start-vs-slow-start.html On Tue, May 7, 2013 at 1:44 PM, Barrera, Hugo wrote: > Hi, > > ** ** > > Anyone guide me in the right direction how to read the debugs for h323 > fast start? > > ** ** > > *thanks* > > _

Re: [OSL | CCIE_Voice] CUPC Client Offline; rather than Available

I believe that is your presence settings, try bouncing the SIP trunk and run the system troubleshooter, it can help you find things that you missed, if all looks good there, then bounce the Presence server. On Thu, May 2, 2013 at 3:42 PM, Joe Fearday wrote: > I successfully integrated CUSP with

Re: [OSL | CCIE_Voice] Buying home lab or Waiting for Cisco Live in June

I know this can be true. When I took my lab, another version was updating and I talked to one of the guys taking it. he said that all the seats were full for the next 6 weeks. So if he did not pass, he most likely would not get another chance. Not sure what people do, book extra labs just in ca

Re: [OSL | CCIE_Voice] can i install many phones from pc?

Yes use loopbacks and get multilab IPBLUE softphone, it will work and I believe IPExpert has a write up on it. http://www.ipblue.com/download.asp?product=vtgo Be sure to get the multilab version On Tue, Apr 30, 2013 at 6:38 AM, Amit Sharma wrote: > AS i am connected for lab over vpn and tryin

Re: [OSL | CCIE_Voice] Blocking 91900 pattern

pml/ > > --- Original Message --- > > From: "Bill Lake" > Sent: April 28, 2013 1:40 AM > To: "William Bell" > Cc: "Ramy Abdelrahim" , "Online Study ( > ccie_voice@onlinestudylist.com)" > Subject: Re: [OSL | CCIE_Voice] Blocking 91900 pa

Re: [OSL | CCIE_Voice] Blocking 91900 pattern

Bill is right, the 7965 phone is not the issue, it is the annunciator only works with SCCP phones. http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/media.html#wp1046552 Annunciator An annunciator is a software function of the Cisco IP Voice Media Streaming Application that provides the

Re: [OSL | CCIE_Voice] ISDN No alerting Message

Do you have a dial peer like this dial-peer voice 1 pots incoming called-number . direct-inward-dial Please share your config if you want more troubleshooting. On Sat, Apr 27, 2013 at 4:39 PM, CISCO CCIE VOICE wrote: > HI experts, > > When Branch-2 MGCP router is in CME SRST mode ,i am unable

Re: [OSL | CCIE_Voice] The best way to restore routers to base configs HOMELAB

Create you base config Save that as base-config-hq in flash, be sure to back it up just in case Then build off it and save for different base point so you can jump ahead when you want Then do write erase and copy base-config-hq running-config Then save and it is right to your base or any confi

Re: [OSL | CCIE_Voice] B-ACD files for CME files

Embedded version in the lab Sent from my iPhone On Apr 26, 2013, at 7:22 PM, Hesham Abdelkereem wrote: > Dear Experts, > > Where can I find the B-ACD files and prompts for CME? > > Many Thanks, > Hesham > ___ > For more information regarding indus

Re: [OSL | CCIE_Voice] Congratulations Rick Mur on Passing CCIE Data Center Lab!

Truly this quote is why they have grow amazingly in their lives and show all of us that if we will stop preventing ourselves, we too can do amazing things. [image: Coco Chanel]“If you were born without wings, do nothing to prevent them fr

Re: [OSL | CCIE_Voice] CME BACD dial-peer

If you are required to use a different port you must change the setting in CUCM Sent from my iPhone On Apr 24, 2013, at 7:55 AM, Martin Sloan wrote: > Awesome, that fixed the problem and many thanks for the help. I had the > listen port command in there from a previous lab and was so focused

Re: [OSL | CCIE_Voice] HQ incoming calls Filed until I reload the router

Was this an MGCP gateway? Sent from my iPhone On Apr 18, 2013, at 6:24 PM, CCIEing wrote: > Hi all, > > Very strange thing happen 2 times during my practice to lab, > > the calls to hq failed until i reload the router > > before reload, ISDN status was ok > > mgcp gateways was registered an

Re: [OSL | CCIE_Voice] how fix br2 router with PSTN router

To expand further You should be able to manipulate any router in you control (not pstn) to be or get NTP from any choice you want. Be that the PSTN, another backbone IP or a router in your control A helpful command is to and burst iburst to the end of your NTP server command. Look it up to see

Re: [OSL | CCIE_Voice] OWLE Lab 1 Task 2.4 " No Service Configured"

Look for a detailed discussion on this very issue around November 19th 2012 Sent from my iPhone On Apr 16, 2013, at 11:25 AM, Ramcharan Arya wrote: > Hi Bill > > I breaks voicemail service on that phone. So what is the alternative > solutions for this task.? > > Thanks, > Ramcharan Arya >

Re: [OSL | CCIE_Voice] Facility IE

Facility IE is for T-1's using NI, you will know it is being used by performing an debug isdn q931 and seeing something like this Aug 24 10:52:06.868: ISDN Se0/2/1:15 Q931: RX <- FACILITY pd = 8 callref = 0x274B Facility i = 0x9 NI is National ISDN in the US and was put out by AT&T, early versio

Re: [OSL | CCIE_Voice] CUE Can't reach NTP ip address

Do you have your ip route 255.255.255.255 service- 0/0 command in? Make sure you can ping the CUE from R1 (I know that sounds wrong but I have been able to ping from CUE and not reverse) if not try rebooting the CUE. I s the NTP service is actually working on R1 from R3 Sometimes if all is co

Re: [OSL | CCIE_Voice] Proctor Labs .PCF File and OSX 10.8.2

Hello Amp, I got it working with the native client. You have to setup a new native OS X Cisco IPSec VPN Go to System Preferences, Network, click the + to create a new VPN, select VPN, Cisco IPSec and name it Now set the Server IP, this worked for me 74.126.20.247 add your user name and passwor

Re: [OSL | CCIE_Voice] BBGK Gatekeeper issues

So the call is completing even without showing in GK calls? That could mean you are using an alternative path so check if the call is completing: - debug isdn q931 - check for alternate dial peer/trunk it could be using On Mon, Mar 25, 2013 at 11:47 PM, Hesham Abdelkereem < heshamcentr...

Re: [OSL | CCIE_Voice] isdn outgoing ie facility

This is fairly old technology, my guess is that some switches (as in PSTN or PBX types) require one or the other or perhaps both to work. Remember before something like primary-ni there were a lot of standards by different vendors that did not really work too well together. I have never really tr

Re: [OSL | CCIE_Voice] BACD w/ custom h225 port

Right there Cory, the default is 1720 but if changed on router or CUCM then you have to match it. Since you already found it was changed in router, you can fix it alternatively here [image: Inline image 1] On Thu, Feb 28, 2013 at 7:34 AM, Cory Gray wrote: > I believe for that to work you have

Re: [OSL | CCIE_Voice] Fast dialling

When I set up my International dial peer with 9.011 and 9.011#, I do predot for the first one and predot, trailing # for the second one. Without this my MGCP gateways will not process the calls. On Thu, Feb 21, 2013 at 8:01 AM, William Bell wrote: > Actually, I think this is controlled by a CM

Re: [OSL | CCIE_Voice] Inbound Dial-Peer in CME GK Scenario

but if you use voice class codec it thinks you support either g711 or g729 and never uses the transcoder. You want only G729 available in your dial peer or you can run into this trouble On Mon, Feb 18, 2013 at 7:39 PM, Steve Keller wrote: > I thought if you applied the voice-class codec to the

Re: [OSL | CCIE_Voice] [CME WEB ADMIN]

CLI good for the test GUI bad for the test Real world might be nice to have the GUI but you really need to be able to do the CLI fast, accurately and also able to find any mistakes rapidly. On Fri, Feb 15, 2013 at 8:48 AM, Jason Lee wrote: > I'm going to agree with Cory here. You will be mu

Re: [OSL | CCIE_Voice] CME Meet me conference not working

conference drop-mode local this caused the conference to drop when all local users leave the call. This is so that external parties can not keep talking on your bridge once you leave. On Wed, Feb 13, 2013 at 7:21 AM, Cory Gray wrote: > I have never used “conference drop-mode local” before. Wh

Re: [OSL | CCIE_Voice] CME Meet me conference not working

Did your conference bridge register with your CME? On Wed, Feb 13, 2013 at 7:18 AM, virajith wrote: > Yes check this... > > ephone-template 1 > conference drop-mode local > softkeys idle ConfList Dnd Mobility Newcall Pickup Redial > softkeys seized Callback Cfwdall Gpickup Meetme Pickup Re

Re: [OSL | CCIE_Voice] Proctor Labs V-Rack issues

did you contact support? can you telnet to your routers and ping servers from there? On Tue, Feb 5, 2013 at 7:18 PM, Steve Keller wrote: > is anybody else currently in a v-rack session that started having > connectivity issues about 1 hour ago? I am working on a lab nad All of a > sudden i have

Re: [OSL | CCIE_Voice] Messages button in SRST

Why not just set up calling party transformations that strip the extra digits and apply it to the vm hunt. Make the patterns only match the incoming numbers from site B? In IPExpert advanced labs (OWLE/5 Lab pack) that would be 408387300X so just make the pattern 408387.300X and strip it to the d

Re: [OSL | CCIE_Voice] Lab Phone Type

Hello Josh, I actually used a combo of VPN and local rack. I configured one of my routers with VPN access, a 9 port PoE HWIC and used it as hardware VPN to Proctor labs and my site C router. I found this to be a very good combo for me. I would do my mock labs on Proctor and then do my testing/r

Re: [OSL | CCIE_Voice] Frame relay class based shaping

what is your hardware platform? This is a known issue on some hardware (800,1800, 2801) a workaround might be to try configuring without the bc and be settings. Cisco bug is http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtb00695 On Sun, Feb

Re: [OSL | CCIE_Voice] Failed Voice Lab

One Week Learning Experiance=OWLE https://www.ipexpert.com/Cisco/CCIE/Voice/Lab-Boot-Camp/One-Week-Lab-Experience On Thu, Jan 31, 2013 at 6:48 PM, Ben John wrote: > Bill, > what's OWLE ? i need to contact Vik. > > Ben > > -- > Date: Thu, 31 Jan 2013 18:41:32 -0600 >

  1   2   3   4   5   >