At least in San Jose the result generally comes between 13:00 and 17:00
of the next business day.
De: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] En nombre de kamal
yousaf
Enviado el: 05 February 2009 11:51
Para: ccie_voice@onlinestudylist.com
If you are using a router 28XX for the VPN Connection to Protorlabs, try
upgrading it to version 12.4(21)a , filename
c2800nm-advipservicesk9-mz.124-21a.bin . That should solve that
problem
Regards
Christian Narvaez M.
UC System Engineer
CCIE Voice #22488
MAGENTA
Reyes Lavalle
.
Christian Narvaez M.
UC System Engineer
CCIE Voice #22488
MAGENTA CHILE
Reyes Lavalle #3350, Las Condes
+(562)2408207
+(569)78076423
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] En nombre de jeremy co
Enviado el: 04 November 2008 02:43
Para: CCIE Voice Maillist
Asunto: [OSL | CCIE_Voice] Using Gui
Check if the AAR route-patterns on the CCM are correct,
Try performing a debug isdn q931 on the T1/E1 gateway and see if the
call is correctly going out
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] En nombre de James Jung
Enviado el: 03 November 2008 17:57
Para:
from you.
regards,
-Original Message-
From: kapil atrish [mailto:[EMAIL PROTECTED]
Sent: Sun 11/2/2008 2:11 PM
To: Christian Narvaez; [EMAIL PROTECTED]
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Finally !, CCIE Voice #22488 ...from Chile
100% correct. I had
in the exam.
-Original Message-
From: chunmei chen [mailto:[EMAIL PROTECTED]
Sent: Sat 11/1/2008 7:18 AM
To: Christian Narvaez
Subject: Re: [OSL | CCIE_Voice] Finally !, CCIE Voice #22488 ...from Chile
Congra Christian!! way to go!
Your notes below is very helpful.. however could you explain
, the experiences of people
which
took the old version and even most of the historical posts of this
forum.
Well, from my part I will retake my life and enjoy all the free time
that a normal
person have :)
Cheers all you and have a successful study
Christian Narvaez M.
UC System Engineer
CCIE Voice
I think the solution is using policing like the configuration below:
policy-map LLQ
class RTP
priority 96
class SIG
bandwidth 8
class class-default
fair-queue
police cir percent 60 conform-action transmit exceed-action
set-dscp-transmit 0
Regards
Christian Narvaez M.
UC
To: Christian Narvaez
Subject: Re: [OSL | CCIE_Voice] Antw: Bandwidth Values used for FRTS
Christain,
Do you have a table like this for G711 calls? I hate to admit but WAN QoS
is one of my weakest areas, you'd think with 2 other IE's I'd get exposure
to technologies like QOS but nope, not me. :) Thanks
The workaround is reset the windows IIS Service (internet information
service), then reopen the callmanager administrator User Configuration page and
you will see the ICD Extension Option appears.
regards
-Original Message-
From: [EMAIL PROTECTED] on behalf of Kapil Atrish
Sent: Sat
Kevin,
I use the following table with the values that I calculated for each scenario
of shapping , LFI and compression. I did memorize it for an easier use during
the lab.
G729
FRF.12 (rounded value)Kbps
MLPPP(rounded value)Kbps
cRTP Disabled
28
31
cRTP Enabled
13
17
Congratulation DevilDoc !! . you well deserve it.
It would be nice if you may spend some time sharing you story of your
journey to get the CCIE Voice, your experience, strategies,
recommendations, etc etc. I think all we will be glad of hear your
experience and learn from a successful case.
Try configuring the following in the CME
Ip http server
Ip http path flash:
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] En nombre de Gary Kuhl
Enviado el: 25 August 2008 07:58
Para: 'Juan'; 'OSL CCIE'
Asunto: Re: [OSL | CCIE_Voice] CUE initialization issues
Try adding username test
This message is innocuous, disregard it.
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] En nombre de Stephen
Collinson
Enviado el: 17 June 2008 10:43
Para: OSL CCIE Voice Lab Exam
Asunto: [OSL | CCIE_Voice] Quick B-ACD query
Would appreciate any insight into why I am getting the following
vlan-based
set qos acl ip TRUST-COS trust-cos any
commit qos acl TRUST-COS
set qos acl map TRUST-COS 220
Thanks
Christian Narvaez
Magenta, Chile
Enjoy 5 GB of free, password-protected online storage. Get Windows Live
SkyDrive.
http://www.windowslive.com
Anybody know if in 6500 QoS configuration, the ACL Workaround stated to
be needed in all non-giga blades is necessary to be used when I am
using Conditional Trust (Just when an IP Phone is connected) , or is it
just needed when using Trust-CoS (Always Trust Phone CoS) ??
Cheers
Christian
is detected
set port qos 3/1-3 vlan-based
set qos acl ip TRUST-COS trust-cos any
commit qos acl TRUST-COS
set qos acl map TRUST-COS 220
Thanks
Christian Narvaez
Magenta, Chile
You can access that guide directly from the HELP of the Callmanager
-Mensaje original-
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] En nombre de Stephen
Collinson
Enviado el: 10 June 2008 07:05
Para: OSL CCIE Voice Lab Exam
Asunto: [OSL | CCIE_Voice] Lab exam CCM Features and services
Hi Scott
If you are using IPIPGW, try configure the H225 Trunk in the CCM with
the following
- Media Termination Point Required : Checked
- Retry Video Call as Audio : Checked
- Wait for Far End H.245 Terminal Capability Set : Uncheked
Also, ensure you have
Checkout this link
http://www.cisco.com/web/learning/le3/ccie/voice/lab_equipment.html
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] En nombre de Marwa Ahmed
Enviado el: 28 May 2008 18:03
Para: ccie_voice@onlinestudylist.com
Asunto: [OSL | CCIE_Voice] lab equipments
hello,
I have
in the readme file
located in the flash, and try to use all the parameters in that example.
De: ovais Iqbal [mailto:[EMAIL PROTECTED]
Enviado el: 27 May 2008 11:12
Para: Christian Narvaez
Asunto: Re: [OSL | CCIE_Voice] B-ACD call fails
Hi Christian,
Thanks for assisting, the config
Congratulations Scott !
I think everyone in this forum would be happy if you can take a moment and
share you experience with us in aspect like : In which attempt you passed it,
How long did you study, Strategy used in the Lab, Resources you used to study,
etc etc. And any other point you
I think that question incongruent. Because there is not way the transcoder can
work for Multicast.
-Original Message-
From: [EMAIL PROTECTED] on behalf of Juan
Sent: Fri 5/23/2008 4:46 PM
To: 'OSL CCIE Voice Lab Exam'
Subject: [OSL | CCIE_Voice] Multicast MOH and transcoding: Q23.33
Three rules of Thumb:
1)Who Places on Hold Determines the Music SOURCE
2)Who IS on hold determines the MOH SERVER from its Media Resource List/Media
Resource List
3)The configuracion of the Media Resource Group where was located the MoH
Server determines if the stream will be Multicast or
in cases is required the ability to
forward the call to ANY voicemail. It would be nice to find a way to avoid that.
Have a good week
-Original Message-
From: Gregory Jost (grjost) [mailto:[EMAIL PROTECTED]
Sent: Sun 5/18/2008 1:34 PM
To: Gregory Jost (grjost); Christian Narvaez
Cc
the phone , the VM 1001 should answer)
Well, I am trying to make work this solution, but till this moment doesnt work
for me.
Am I missing something ?
-Original Message-
From: Gregory Jost (grjost) [mailto:[EMAIL PROTECTED]
Sent: Fri 5/16/2008 12:51 PM
To: Christian Narvaez; Mark Snow
the mailbox based on the ORIGINAL REDIRECTING
NUMBER (the phone 2010), and not the LAST REDIRECTING NUMBER (The CTI_RP 7)
Any Ideas how to resolve this issue?
-Original Message-
From: [EMAIL PROTECTED] on behalf of Christian Narvaez
Sent: Wed 5/14/2008 11:01 AM
To: ccie_voice
meant for that.
H, maybe another hint would not be so bad to learn fish a barracuda like
this :)
-Original Message-
From: Mark Snow [mailto:[EMAIL PROTECTED]
Sent: Wed 5/14/2008 4:03 PM
To: Christian Narvaez
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Unity 4.0
You can test it using Permon , and selecting the Performance Object Cisco
Locations then see how the BandwidthAvailable varies.
-Original Message-
From: [EMAIL PROTECTED] on behalf of FrogOnDSCP46EF
Sent: Wed 4/30/2008 5:45 AM
To: CCIE Voice Maillist
Subject: [OSL | CCIE_Voice] CCM :
I think you forgot to remove the 9 in front of the called number. The PSTN
Router ever expect the DNIS without the 9.
-Original Message-
From: [EMAIL PROTECTED] on behalf of Abdalla Abdalla
Sent: Mon 4/28/2008 11:18 AM
To: CCIE Voice StudyList
Subject: [OSL | CCIE_Voice] Pod 23: HQ/BR1
Depends on what is required in the Exam.
The faster way of sync the clock of the Unity is against the clock of the CCM
1) In the Unity edit (with notepad) a file with the only command net time
\\10.1.200.21 /set /yes and leave it on your desktop . (replace the IP with
the one of your CCM)
about this ?
-Original Message-
From: [EMAIL PROTECTED] on behalf of ccievoice1
Sent: Mon 4/28/2008 12:32 PM
To: Christian Narvaez
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] 6500 QoS - Policer configuration
As per SRND, should be rate 32 burst 8000
On Tue, Apr 29
Message-From: [EMAIL PROTECTED] on behalf of ccievoice1Sent: Mon 4/28/2008
12:32 PMTo: Christian NarvaezCc: [EMAIL PROTECTED]: Re: [OSL | CCIE_Voice] 6500
QoS - Policer configurationAs per SRND, should be rate 32 burst 8000On Tue, Apr
29, 2008 at 12:19 AM, Christian Narvaez [EMAIL PROTECTED]wrote
For an ESW Port with IPPhone+PC, It should be something like this:
inter fastethernet 1/0
switchport trunk encapsulation dot1q
switchport mode trunk
switchport trunk native vlan 100 Data Vlan
switchport voice vlan 200 Voice Vlan
-Original Message-
From: [EMAIL PROTECTED] on
Looks like that methods does not work. What worked to me is:
1- Stop Network Time Service.
2- go to Program Files--Cisco--Xntp
3- ntpdate.exe -b 172.1.100.1 (Or whatever NTP server is)
4- Start Network Time Service
-Original Message-
From: [EMAIL PROTECTED] on behalf of Chad
You've got to use for instance :
The first rule with:
300* (block from 3001 to 3009)
and
The Second rule with
800* (block from 8001 to 8009)
-Original Message-
From: [EMAIL PROTECTED] on behalf of FrogOnDSCP46EF
Sent: Mon 4/14/2008 10:16 PM
To: ccie_voice@onlinestudylist.com
As I know in the real lab you will not be able to test SRST shutting down the
Serial, this is because the connection to the routers is via telnet, in that
case you would loose connection.
My favourite way for testing SRST is adding a route like this which is quicker
than ACLs
ip route
Guys,
It is normal that when I have configured VATS, once performed the comand show
policy-map it displays the percentage bandwidth in relation to the CIR (33%/
121 Kbps), and it does not apply the percentage in relation to the command
bandwidth configured under the serial ???
For the T1 You need one more step:
- Go to Service Parameters-- CallManager
- Click Advanced
- Look for the Field Change B-Channel Maintenance Status 1
- In that field write the device name of the T1 gatekeeper follow by a 0 if the
channel will be used or a 1 if you want busyout the channel .
for both.
-Original Message-
From: [EMAIL PROTECTED] on behalf of Jonathan Charles
Sent: Tue 4/8/2008 12:21 PM
To: Christian Narvaez
Cc: CCIE Maillist; Edward French
Subject: Re: [OSL | CCIE_Voice] 3725
So, since they are using 3700s in the lab, we have to use the old,
non-PVDM2 way of creating
Optional
CSS: VM-MWI
vm-mwi
internal
-Original Message-
From: [EMAIL PROTECTED] on behalf of Carter, Bill
Sent: Tue 4/8/2008 4:44 PM
To: Christian Narvaez; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Strategy: Configure by Section or byDevice
I
I think the best way to get the CRA Editor is loggin in an IPCC 4.0(x) the go
to TOOLS--PLUG-INS.
The size 48 Mb
-Original Message-
From: [EMAIL PROTECTED] on behalf of Priyank Kiran
Sent: Tue 4/1/2008 7:10 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Script Editor
of how to fix the replication you
mentioned
Regards
-Original Message-
From: Edward French [mailto:[EMAIL PROTECTED]
Sent: Mon 3/31/2008 6:34 AM
To: Christian Narvaez; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CCM Versions out-of -sync
Replication is broken on all
To Reset IP Phones to Factory Default
1 - Hard Reload the Phone (Taking out the power)
2 - Press the # while the speaker is lit
3 - Press 123456789*0#
-Original Message-
From: [EMAIL PROTECTED] on behalf of Jacob Owen
Sent: Mon 3/31/2008 12:53 PM
To: CCIE Voice
Subject: [OSL |
Guys,
For those who have recently taken the practical exam. Which CallManager Express
Version has been used 3.3, 4.0 or 4.1 ?? IOS version 12.4 supports all them.
PD: Hope I am not trying to violate any NDA :P
.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jonathan
Charles
Sent: Monday, March 17, 2008 4:36 PM
To: John
Cc: ccievoice1; ccie_voice@onlinestudylist.com; Christian Narvaez
Subject: Re: [OSL | CCIE_Voice] IPMA - Wizard or Manual Configuration
Honestly, I have
46 matches
Mail list logo