[Chevelle-list] Insurance

It is time to insure and get my 72 Chevelle on the road. Any recommendations on companies? I know Hagerty and Grundy are both pretty well know. Any others. Thanks, Jim

[Chevelle-list] Parts to Florida

I have front and rear seats out of a chevelle that I need to get to Daytona Beach. Anyone headed that way or know someone that is that might have room? Thanks, Jim Buckingham

[Chevelle-list] big end distributer

I gave a friend a big end distributer from my big block 454 for his small block 350. To change from points to electronic. Marked rotor position, dropped in electronic dist. Started the car and it ran rough ? couldn't get enough counter clockwise turn to smooth it out. do I need to change vacuum ad

Re: [Chevelle-list] Back On List Again

Outlook and gmail From: Malibu [mailto:327mal...@gmail.com] Sent: Wednesday, December 17, 2008 2:51 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Back On List Again Outlook express - Original Message - From: Michael Pell To: The Chevelle Ma

[Chevelle-list] Posi?

Thanks everyone for the info. Looks like I'm going with 3:73. Jimmy

[Chevelle-list] Posi?

I have a 70 Chevelle with a 396 and Turbo 400 the rear is 4:56 which is way too much. I not racing it or anything just playing around with it. I want to change it to something a little less aggressive, What gears do you all recommend for the rear? Jimmy

Re: [Chevelle-list] 1970 402 block

[EMAIL PROTECTED] On Behalf Of Smith, James L. Sent: Friday, June 20, 2008 5:50 PM To: chevelle-list@chevelles.net Subject: [Chevelle-list] 1970 402 block Anybody now the availability of a 1970 402 block and heads. Look to replace the 1969 396 in my 70 Chevelle SS. thanks Jimmy

[Chevelle-list] 1970 402 block

Anybody now the availability of a 1970 402 block and heads. Look to replace the 1969 396 in my 70 Chevelle SS. thanks Jimmy

[Chevelle-list] PST Sway Bars

Anybody use PST Sway Bars on there cars? How do they compare to stock? thanks Jimmy

Re: [Chevelle-list] Motor Mounts

I changed from a 307 to a big block and just used 307 mounts on the block. I believe theres a difference in how tall they are. I have'nt had any problems with them. James Jon Vore wrote: The 307 mounts are different for some reason. I ran into the same thing. You can chang

Re: [Chevelle-list] "Off topic" wackiest street names

Well here's a good one,,in northern Kentucky, right along I-75, there's a sign that says,big bonelick park. - Original Message - From: John Nasta To: The Chevelle Mailing List Sent: Monday, February 27, 2006 2:07 PM Subject: Re: [Chevelle-list] "Off topic" wack

Re: [Chevelle-list] Roller tip versus regular rockers

Well Dan,,I don't mind a situation like that,it's nice to help build their economy,,,it's how some of our people buy from a country that doesn't even try to hide the fact that they DON'T intend to practice FAIR trade with us,,incredible!I'm speaking of JAPAN of course - Original Message -

Re: [Chevelle-list] Vacuum Loss

Yea I have, it should store vacuum for your needs as needed - Original Message - From: Karl Groves To: 'The Chevelle Mailing List' Sent: Friday, February 03, 2006 11:04 PM Subject: Re: [Chevelle-list] Vacuum Loss James -   Have you use

Re: [Chevelle-list] 1968 fan shroud

Hi Tim, what I did with my 70 BB. SS.,, I took a shroud and cut the top half from the bottom,it would fit then,it only had a small gap between the two halves,,better yet,,if I ever had to work on the top front,,all I had to do was remove the top half, plenty of room to do my thing - Original Me

Re: [Chevelle-list] Vacuum Loss

Hey Ryan,,check with Jegs,or your favorite supplier,,ask about a vacuum storage canister,,they work! - Original Message - From: Ryan Langstraat To: Chevelle Chat Forum Sent: Friday, February 03, 2006 10:25 PM Subject: [Chevelle-list] Vacuum Loss A buddy and

Re: [Chevelle-list] FW: eSecurity Advisory: Blackmal Email Worm

Title: FW: eSecurity Advisory: Blackmal Email Worm Hi Gail,,I to just had my pc in the shop,,doesn't it just piss you off to no end,that some brainiac uses their knowledge to create havoc instead of doing good things with it !!! - Original Message - From: gail To: [EMAIL PR

Re: [Chevelle-list] Heavy Chevy

Hey Matt,I recall seeing a white one,a shade between charcoal grey and silver,I'm sure there was more,I just can't recall the rest. - Original Message - From: "Matthew Post" <[EMAIL PROTECTED]> To: "The Chevelle Mailing List" ; Sent: Wednesday, February 01, 2006 7:11 PM Subject: Re: [Chev

Re: [Chevelle-list] New source for flux capacitors

Hey Carl,,I never can run out of blinker fluid,,My big truck has the new tech.,solar powered blinkers !! - Original Message - From: Karl Groves To: 'The Chevelle Mailing List' Sent: Tuesday, January 31, 2006 10:29 PM Subject: Re: [Chevelle-list] New source f

Re: [Chevelle-list] Off Topic - Frontier Tranny Question

YEA,,finally, an american!,and then somebody tries to tell you,that it was made in Tenn.and his was made in Canada,,,well big deal,,at least Canada practices FAIR trade with America,,study,see who has the largest trade deficit with us,,,JAPAN - Original Message - From: [EMAIL

Re: [Chevelle-list] 396 or 502?

Tom,,just my opinion,,ALL pros,no cons,just get the right cam for your setup,,[trans,what type of driving,etc.] - Original Message - From: [EMAIL PROTECTED] To: chevelle-list@chevelles.net Sent: Friday, January 13, 2006 12:22 PM Subject: [Chevelle-list] 396 or

Re: [Chevelle-list] (no subject)

hey Craig,,what's this about a classified sec.? how do I get there? thanks if you can help - Original Message - From: Craig and Cerena To: 'Chevelle List' Sent: Friday, January 13, 2006 8:14 AM Subject: [Chevelle-list] (no subject) Hi gang.  I can’t see

Re: [Chevelle-list] 70 El Camino gear ratios?

my guess is 3:55's - Original Message - From: "Michael Pell" <[EMAIL PROTECTED]> To: "The Chevelle Mailing List" Sent: Saturday, December 24, 2005 1:26 PM Subject: [Chevelle-list] 70 El Camino gear ratios? > What's the most likely gear ratio(s) from the factory on a 70 El Camino > with

Re: [Chevelle-list] Christmas

Title: Message Hey, happy holidays and our best wishes for your families. - Original Message - From: John W. Lonadier, Jr. To: 'The Chevelle Mailing List' Sent: Saturday, December 24, 2005 10:19 AM Subject: RE: [Chevelle-list] Christmas Same to all Ch

Re: [Chevelle-list] Re: Quarter Mile Times at Sacramento Raceway

well,if I put the money into my car equal to the cost of the porsche,,I'd be running 9's to 10's also! - Original Message - From: "Larry Williams" <[EMAIL PROTECTED]> To: "The Chevelle Mailing List" Sent: Sunday, December 11, 2005 1:43 PM Subject: Re: [Chevelle-list] Re: Quarter Mile Ti

Re: [Chevelle-list] Sacramento

This time of year there aren't too many shows going on that I know of, but there is always the Towe Auto Museum.  It started out as a private Ford museum, but has branched out tho being a classic car museum.  It's been years since I've been there, but it's supposed ot be pretty cool.   http://www

Re: [Chevelle-list] Exhaust System

I TOTALLY AGREE,,I had a 70 chevelle SS for 30 yrs.before I finally sold it,,comp. cam 540,,w/FLOWMASTERS,,,just an awsome sounding car. - Original Message - From: "Craig Ellis" <[EMAIL PROTECTED]> To: "The Chevelle Mailing List" Sent: Monday, November 28, 2005 4:46 PM Subject: Re:

Re: [Chevelle-list] Exhaust System

I would go w/2.5",,better w/more backpressure,,,AND DEFINATLY go with the BEST,,FLOWMASTERS - Original Message - From: Larry Shouse To: Chevelle List Sent: Monday, November 28, 2005 1:06 PM Subject: [Chevelle-list] Exhaust System It's time to buy me an exhaus

Re: [Chevelle-list] Anyone home?

rom Cars to Wal Mart, I must admit it is getting harder and harder. Marlon.[EMAIL PROTECTED] wrote: I agree with all of you; but you're missing the big picture. James is right. The Japanese do not open their trading borders, not just for Autos but all products, with th

Re: [Chevelle-list] Anyone home?

I have an idea,,no a suggestion,get rid of that japanese car,,anybody should be ashamed to own japanese cars,they restict owr big three automakers to a specific # of cars that can be sold in japan,, FAIR TRADE ??? I've said before,,If you see me in a japanese car or truck,,call the law,,I'v

Re: [Chevelle-list] 3.73 gear question

yes,making sure you've have the set shimed up correctly is most important,for proper backlash. - Original Message - From: "André-Tigergutt" <[EMAIL PROTECTED]> To: "'The Chevelle Mailing List'" Sent: Sunday, November 20, 2005 3:37 AM Subject: RE: [Chevelle-list] 3.73 gear question I h

Re: [Chevelle-list] 396 Identification help needed

here you go,check here,www.mortec.com,they give you all the descriptions of stamped numbers,go at it! - Original Message - From: <[EMAIL PROTECTED]> To: "The Chevelle Mailing List" Sent: Monday, November 07, 2005 7:51 AM Subject: [Chevelle-list] 396 Identification help needed > I have a

[Chevelle-list] help

Hi everyone,can anyone help me?,I purchased a used car recently,the pass.frt. parking light has never worked,and also the acc. pedal is quite close to the floor, resulting in only using part throttle under the hood,now here is where it gets weird,my local auto zone manager says that because o

Re: [Chevelle-list] How to own an El Camino in 3, 000 easy lessons / EC's in the rain?

Hey John, in the early 80's I had a 73 Camino that I used to park in the street, in a hilly section of the Bronx. I used to park it facing up hill as much as I could and the rain/melting snow would run out by the tail gate. If your driveway is flat I would make ramps that would elevate the f

Re: [Chevelle-list] Octane (OT)

simple,,carbon has built up on the top of your pistons,,in effect raising your compression slightly,hence requiring a higher octane fuel. - Original Message - From: "Brian Knight" <[EMAIL PROTECTED]> To: Sent: Thursday, September 15, 2005 7:39 PM Subject: [Chevelle-list] Octane (OT) >

Re: [Chevelle-list] Fw: TRANS CONVERSION

Title: Message Thanks Jim :o) - Original Message - From: Jim Buckingham To: 'The Chevelle Mailing List' Sent: Tuesday, July 26, 2005 1:26 PM Subject: RE: [Chevelle-list] Fw: TRANS CONVERSION James,   On mine, if you look at the gasket on

Re: [Chevelle-list] 283

Hey John, the next time you come to N.Y.C drive through either the Lincoln or Holland tunnels late at night or early AM with the windows open, you"ll really get to hear the flowmaster sing : ). Jimmy.C - Original Message - From: "John Nasta" <[EMAIL PROTECTED]> To: "The Chevelle Mailing Lis

Re: [Chevelle-list] How does one answer a question like this?

The only car foresail I've seen was on the taxi car-boat floating in from Cuba last year...Dale <[EMAIL PROTECTED]> wrote: Believe it or not, I just received this…   Quote: are there a lot of cars forsale?   That’s all there was…  Of course I replied, “Yes.”   Dale McIntosh 67 El Camino 1967

[Chevelle-list] Fw: TRANS CONVERSION

  - Original Message - From: James Colgan To: chevellefan list Sent: Tuesday, July 26, 2005 10:32 AM Subject: TRANS CONVERSION Hey Guys, I need a little advice...  actually I need allot but I will take a little at a time :o). I am converting from auto on the column to 4 spd on

Re: [Chevelle-list] Bell housings

Ryan, I'm pretty sure it will fit any post 1965 Chevy block. its for a 10 1/2'' inch clutch assembly. hope this helps. Jimmy .C - Original Message - From: Ryan Langstraat To: Chevelle Chat Forum Sent: Saturday, July 09, 2005 10:33 PM Subject: [Chevelle-list] Bell

Re: RE: [Chevelle-list] Valvecover threads?

whew,750.00 ? maybe I should have gotten a patent !!,,sorry no pics - Original Message - From: Clint Hooper To: The Chevelle Mailing List Sent: Tuesday, July 05, 2005 8:17 PM Subject: Re: RE: [Chevelle-list] Valvecover threads? Do you have any photos of thes

Re: [Chevelle-list] (no subject)

it was a good one! still have 10 fingers and 2 eyes, all though I think the livers of a few of us have fattened up. :o) - Original Message - From: "Chuck Speake" <[EMAIL PROTECTED]> To: Sent: Monday, July 04, 2005 8:49 PM Subject: [Chevelle-list] (no subject) > Happy 4th of July everyon

Re: [Chevelle-list] rear control arm question

Hi Clint , why rubber an not poly in the rear control arms? just curious. Jimmy Colgan - Original Message - From: "Clint Hooper" <[EMAIL PROTECTED]> To: "The Chevelle Mailing List" Sent: Wednesday, June 15, 2005 9:12 PM Subject: Re: [Chevelle-list] rear control arm question > I would buy

Re: [Chevelle-list] (no subject)

- Original Message - From: James Colgan To: The Chevelle Mailing List Sent: Tuesday, June 14, 2005 3:55 PM Subject: Re: [Chevelle-list] (no subject) what color is it and what condition is it in? thanks  Jimmy

Re: [Chevelle-list] (no subject)

what color is it and what condition is it in? thanks  Jimmy - Original Message - From: william smith To: Chevelle-list@chevelles.net Sent: Tuesday, June 14, 2005 11:22 AM Subject: [Chevelle-list] (no subject) i got my first chevelle 1971 two days a go a

Re: [Chevelle-list] re-chroming question

there is a guy in New Jersey. I haven't used him so I cant vouch for his work but your friend might want to try him. RECHROME PARTS LTD PO Box 62 96 east main st. Mendham,NJ 07945phone # 1-800-516-7278 I hope th

[Chevelle-list] shifter?

does anyone on the list know if a Muncie shifter from a 1968 console car work with a 1972 console car. I am converting from a column automatic to a 4spd Muncie m-20 wide ratio. I have the shifter tunnel hump and console and am eyeballing a shifter on e-bay. any thoughts , advice, comments ar

Re: [Chevelle-list] truck bellhousing

x27;ll need a bearing retainer spacer. > Here's more info: > http://www.5speedtransmissions.com/GmTruckBellhousingInfo.pdf > > Mike > > > Quoting James Colgan <[EMAIL PROTECTED]>: > > > I have a bellhousing #460486 I was told it was a truck bellhousing &

Re: [Chevelle-list] bellhousing

I have a bellhousing #460486 I was told it was a truck bellhousing ,but I would like to use it in my 72.with an 11'' inch clutch. is there any reason why I can't or shouldn't use it? thanks Jimmy.C - Original Message - From: Bill Lessenberry To: The Chevelle Mailing Lis

Re: [Chevelle-list] mountain passes

I think you would want to lean out the fuel mixture the higher you go . because the air gets thinner. less air less fuel.:) - Original Message - From: "Dennis Kiernan" <[EMAIL PROTECTED]> To: "The Chevelle Mailing List" Sent: Thursday, May 26, 2005 12:41 AM Subject: Re: [Chevelle-l

Re: [Chevelle-list] BELLHOUSING

THANKS MIKE. JIMMY.C - Original Message - From: "Michael Pell" <[EMAIL PROTECTED]> To: "The Chevelle Mailing List" Sent: Tuesday, May 10, 2005 9:15 AM Subject: Re: [Chevelle-list] BELLHOUSING > > The typical pick-up truck (1/2 ton, 3/4 ton) with a 4sp behind a > typical SBC/BBC have a

Re: [Chevelle-list] BELLHOUSING

327/dead | 4-speed   | Wilwood Brakes | 245/45/16 BFG R1'67 Chevelle | ex-SS396 | 355/700R4 | F-Body Brakes  | 275/40/17 Kumho MX From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of James ColganSent: Monday, May 09, 2005 2:20 PMTo: Chevelle-list@c

[Chevelle-list] BELLHOUSING

Does anyone know if a truck bellhousing cast # 6263756 will work in a 72 chevelle with a Muncie ? I have a 14" flywheel with an 11" clutch and the #621's are hard to come by for reasonable $$. thanks for any help. Jimmy.C

Re: [Chevelle-list] Assembly manual

Hey Dale or any other list member, is there a page for the location of SS then 454 located directly beneath for a 1972? I have an assembly book, it gives the relation between the letters and #'s but do's not give a starting point on the fender . ie. 10''down from top of fender. 5'' in from d

Re: [Chevelle-list] Prices at Carlisle for Chevelles

I was at Carlisle yesterday (Saturday) and over at the car coral there was a lot of empty spaces. I thought it was the bad weather from Friday night? or maybe it was the Barrett Jackson virus ? what's 30k when an L-S6 goes for 300k. anyhow I agree, even though I enjoy Carlisle I think English

Re: [Chevelle-list] For a living...

Hello My name is Jim LaRoche,could you do me a favor and have someone delete my address from the Chevelle mailing list.I do not have anything against anyone in the club.Its just that I have only about 10-15 minutes every 4 days to read my E-mail,and I find between 150 and 200 messeges by club m

Re: [Chevelle-list] for a living

I work at Kansas State University in Telecommunications. I run cable and hook up phones,computers etc. James Bellamy - Original Message - From: "Herb Lumpp" <[EMAIL PROTECTED]> To: "The Chevelle Mailing List" Sent: Tuesday, April 05, 2005 3:21 AM Subject:

Re: [Chevelle-list] For a living...

Structural iron worker in NYC until gravity got the best of me. now I'm Mr.Mom .   Jimmy Colgan , Warwick, NY - Original Message - From: [EMAIL PROTECTED] To: Chevelle-list@chevelles.net Sent: Tuesday, April 05, 2005 3:00 AM Subject: Re: [Chevelle-list] For a

[Chevelle-list] Congradulations

Congratulations and Best of luck, many years of happiness ahead. Jimmy. C   - Original Message - From: John Fig To: chevelle list ; [EMAIL PROTECTED] Sent: Wednesday, March 30, 2005 3:01 PM Subject: [Chevelle-list] new addition to the FIG clan Hey All Ju

RE: [Chevelle-list] Car Show / Prizes

Herb,Their is a good car show with A swap meet in Texas,in April. Jim James LaRoche 1009 West Marin DelRio,Texas 78840 [EMAIL PROTECTED] From: "Herb Lumpp" <[EMAIL PROTECTED]> Reply-To: The Chevelle Mailing List To: "The Chevelle Mailing List" Subject: RE: [Chevelle-lis

Re: [Chevelle-list] Car Show / Prizes

Is Texas too far to come,because their is A nice car show and swap meet in April. If interested call me and I will forward to you all the info.Jim James LaRoche 1009 West Martin DelRio,Texas 78840 830-775-3131 [EMAIL PROTECTED] From: [EMAIL PROTECTED] Reply-To: The Chevelle Mailing List To

Re: [Chevelle-list] Refurbishing Steering Wheels

Larry,Try the chevelle parts catalogs in car magazines.They reproduce steering wheels.Thanks Jim LaRoche [EMAIL PROTECTED] From: "Larry Shouse" <[EMAIL PROTECTED]> Reply-To: The Chevelle Mailing List To: "The Chevelle Mailing List" Subject: Re: [Chevelle-list] Refurbishing Steering Wheels Date:

Re: [Chevelle-list] GROUNDUP

Hey Joe , they are in Meriden ,Connecticut. there e-mail is [EMAIL PROTECTED]. their web www.ss396.com. their phone # is 203-235-1200 hope this helps you Jimmy. C - Original Message - From: [EMAIL PROTECTED] To: Chevelle-list@chevelles.net Sent: Friday, March 11, 2

Re: [Chevelle-list] mice

in the city you have to worry about the "RATS"? the two legged kind !! .they can be a bigger problem. - Original Message - From: Scott Somers To: The Chevelle Mailing List Sent: Thursday, March 10, 2005 9:56 AM Subject: Re: [Chevelle-list] mice Since I live i

Re: [Chevelle-list] F*rd Video

Here it is...   http://www.muscularmustangs.com/downloads/anthem.wmv Pretty cool.  Takes a second or two to figure out that's what is being played, but then it all makes sense. Krister Meister <[EMAIL PROTECTED]> wrote: I was at the Manufacturing Week Trade Show in Chicago yesterday and stoppedby a

Re: [Chevelle-list] F*rd Video

Looks like it's an actual commercial.  I found an article about it on Freep   http://www.freep.com/money/autonews/ford15e_20041015.htm Looking for the video now.   - James Krister Meister <[EMAIL PROTECTED]> wrote: I was at the Manufacturing Week Trade Show in Chicago yesterday and

Re: [Chevelle-list] 049 Heads

did you ever figure out what a reasonable price was ? I am looking for large oval / open chamber heads for a BBC ? Thanks, JC - Original Message - From: [EMAIL PROTECTED] To: chevelle-list@chevelles.net Sent: Friday, February 11, 2005 8:17 PM Subject: [Chevell

RE: [Chevelle-list] First ride

Say Andre,Do you need any parts for your projects,I deal in nice clean used sheet metal for cars and trucks.All brands of car and trucks from 1938-1985.Thanks Jim James LaRoche 1009 West Martin DelRio,Texas 78840. [EMAIL PROTECTED] From: André-Tigergutt <[EMAIL PROTECTED]> Reply-T

Re: [Chevelle-list] First ride

CONGRATULATIONS !!! AND BEST WISHES ! JC - Original Message - From: <[EMAIL PROTECTED]> To: Sent: Thursday, February 03, 2005 2:51 PM Subject: [Chevelle-list] First ride > In June of 1972 I rode home from the hospital in my father's red 66 Chevelle SS. It was my first ride in a car. I

Re: [Chevelle-list] 69 - manual tranny, firewall pics ?

Hey Andre , I am going to be doing a conversion from automatic to 4spd manual in about six weeks. I would like to see any pictures you have concerning the clutch linkage. thanks, JC - Original Message - From: "André-Tigergutt" <[EMAIL PROTECTED]> To: "'The Chevelle Mailing List'" Sent: Fri

Re: [Chevelle-list] vin # and milage

what year is the car ? JC - Original Message - From: Jack Thorpe To: Chevelle-list Sent: Friday, January 28, 2005 10:24 AM Subject: [Chevelle-list] vin # and milage Is there any way to research a older vin# for accidents and mileage. Also the vin# is:

Re: [Chevelle-list] Web

n't help with tag bolted to cover. > > Dale > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of James Colgan > Sent: Monday, January 17, 2005 6:12 PM > To: The Chevelle Mailing List > Subject: Re: [Chevelle-list] Web > >

Re: [Chevelle-list] Web

question to any and all who may know how to de-code what I believe to be a Muncie 4spd transmission .here we go . case #3925661 tail #3857584 case cover # 3952648. a stamped # on the case POE22A. and a metal tag that is bolted to the cover #3952659WB. any help is greatly appreciated. J.C - Ori

Re: [Chevelle-list] help, odd transmission leak

Im going to be visiting some wrecking yards here in Texas this Month,is their anything that you need,caror truck, and all brands. Jim LaRoche 1009 West Martin DelRio,Texas 78840 [EMAIL PROTECTED] From: [EMAIL PROTECTED] Reply-To: The Chevelle Mailing List To: [EMAIL PROTECTED],"The Chevelle Mail

Re: [Chevelle-list] Web

A Herb,nice web site ! are you a motorcycle road race fan? great sport. love the Camino too. JC - Original Message - From: "Herb Lumpp" <[EMAIL PROTECTED]> To: "Chevelle List" Sent: Sunday, January 09, 2005 9:32 AM Subject: [Chevelle-list] Web > Hi guys, > > I revamped my web page and

Re: [Chevelle-list] ADVICE

, 2005 9:06 PM Subject: Re: [Chevelle-list] ADVICE > James I found this at www.mortec.com > > 361959.454...73-90...2 or 4 bolt > > Someone who knows will need to explain the P > > > On Sat, 8 Jan 2005 14:57:00 -0500, James Colgan <[EMAIL PROTECTED]> wrote: &g

Re: [Chevelle-list] ADVICE

I have a question for anyone on the list that can help me ? I went to look at a motor today (454). I don't have the right book to check the cast # on the block , as follows # 361959 and what looked like the letter P under it but at 90 degree angle. other markings  GM  T 12  . THANK YOU JC

Re: [Chevelle-list] my

Hope you all have a happy & healthy New Year ! - Original Message - From: [EMAIL PROTECTED] To: Chevelle-list@chevelles.net Sent: Friday, December 31, 2004 3:38 PM Subject: Re: [Chevelle-list] my Happy New Yewar to you too!

Re: [Chevelle-list] Edlebrock carb

Mark,My name is Jim LaRoche. Send me an E-mail if you get this messege.Jim Jim LaRoche 1009 west Martin DelRio,Texas 78840 [EMAIL PROTECTED] From: mark fellman <[EMAIL PROTECTED]> Reply-To: The Chevelle Mailing List To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Edlebrock carb Date: W

Re: Re: [Chevelle-list] 67 Chevelle - paint colors on line

Dan Im into muscle cars,did you know that there was A super sport wagon in 1973.Send me an e-mail if you received this. Thanks Jim [EMAIL PROTECTED] Jim LaRoche 1009 West Martin DelRio,Texas 78840 From: <[EMAIL PROTECTED]> Reply-To: The Chevelle Mailing List To: Subject: Re: Re: [Chevelle-list]

Re: [Chevelle-list] 67 Chevelle - paint colors on line

Ed, Hi my name is Jim LaRoche,and Im into muscle cars.Send me an e-mail if this reaches you. Jim LaRoche 1009 West Martin DelRio,Texas 78840 [EMAIL PROTECTED] From: Ed Riggins <[EMAIL PROTECTED]> Reply-To: The Chevelle Mailing List To: The Chevelle Mailing List Subject: Re: [Chevelle-list] 67 C

Re: [Chevelle-list] Happy Holiday!

Happy new year from Jim & Yolanda in DelRio Jim LaRoche 1009 West Martin DelRio,Texas 78840 [EMAIL PROTECTED] From: [EMAIL PROTECTED] Reply-To: The Chevelle Mailing List To: "The Chevelle Mailing List" Subject: Re: [Chevelle-list] Happy Holiday! Date: Mon, 27 Dec 2004 16:35:12 +0100 (CET) Happy h

Re: JC 454 Re: [Chevelle-list] (no subject)

ock main bolts. I think you'll be fine. Where are > you located? My friend had a 454 he was selling..not sure if he still > has it. Email me at [EMAIL PROTECTED] > Walt > > > - Original Message - > From: James Colgan <[EMAIL PROTECTED]> > Date: Thursday,

[Chevelle-list] (no subject)

I've been searching e-bay motors for a 454ci bbc for my 72 Chevelle. I've seen a couple but they have 2 bolt mains. when its all said and done I want to be pushing a little over 500 hp.(Street driven) is a 2 bolt enough to support this reliably? JC

Re: [Chevelle-list] new Chevelle mag on news stands

Hey Bill Bradley,I read your e-mail about the chevelle issue, of super chevy .is it December, 04 or February,05 issue?. because I just went and got January,05, and it's about the small block? I would like to know if I need to get a back issue.or if the Feb., 05 just didn't hit the stands aro

RE: [Chevelle-list] HOT RO POWER TOUR

Bill I Received this e-mail. Im into muscle cars im looking for A 73 SS Chevelle. Any help. Jim LaRoche 1009 West Martin DelRio,Texas 78840 [EMAIL PROTECTED] From: "Bill Vander Werf" <[EMAIL PROTECTED]> Reply-To: The Chevelle Mailing List <[EMAIL PROTECTED]> To: "'The Chevelle Mailing List'" <[EMAI

Re: [Chevelle-list] request

Hi everyone,,I'm finally putting our '70 Chevelle SS for sale,if your interested, reply,and give me your e-mail,,I'll send a pic.  [EMAIL PROTECTED] - Original Message - From: Dan McIntosh To: The Chevelle Mailing List Sent: Friday, December 03, 2004 8:49 PM Subj

Re: [Chevelle-list] re-enable list too

MY SERVER HASN'T REPORTED ANY PROBLEM'S ,I ALSO HAVE NORTON ANTIVIRUS AND THAT SEEMS FINE ALSO. BUT I ALSO SEEM TO HAVE LOST TOUCH WITH THE LIST? DOES ANYONE KNOW WHAT'S ON? JIMMY COLGAN - Original Message - From: Paul Kaiser To: The Chevelle Mailing List Sent: Monday, D

Re: [Chevelle-list] camaro for sale

Hi , can you e-mail me some pictures of the car, thanks J.C - Original Message - From: Melanie Lopez To: Chevelle List Sent: Thursday, November 18, 2004 2:34 PM Subject: [Chevelle-list] camaro for sale Sorry, I know this is a Chevelle list, not a Camaro

Re: [Chevelle-list] Chevelle Heavy Chevy?

Hey Bob, thanks for the advice, and I' am a rookie at this so I'm all ears. if anybody else from the list has anything to add, I'm open. Thanks again Jimmy - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, November 11, 2004 12:00 PM

Re: [Chevelle-list] Chevelle Heavy Chevy?

so much for the 350) 2= 1972 B= Baltimore MD (where it was built) the rest of the numbers are production numbers in sequence.  hope this helped you in your decision.  Write back,  Ken - Original Message - From: James Colgan To: The Chevelle Mailing List

Re: [Chevelle-list] Chevelle Heavy Chevy?

'm not sure by your email if what you have is a HeavyChevy  let me know about it.  Ken - Original Message - From: James Colgan To: The Chevelle Mailing List Sent: Wednesday, November 10, 2004 9:17 PM Subject: Re: [Chevelle-list] Chevelle

Re: [Chevelle-list] Chevelle Heavy Chevy?

Hi Ken, my name is Jimmy , I seen in your e-mail to the list members that  you have info about the" Heavy Chevy-".I just picked up a 72 plain jane chevelle and am looking for some ideas .It's my first restoration atempt so I guess I'm a rookie.so if you know of any web sites/books/videos/etc

[Chevelle-list] a listing

Hi everyone,if anybody is interested,I have a friend who has a El Camino for sale, 1985,305 v8,350 turbo,pw,cruise,am-fm stereo,pop-up sunroof,tilt,146,000 miles,dark blue,rally wheels, and is in great shape! call 937-492-5905,ask for Roy Wise.  <>

Re: [Chevelle-list] request

Who has the link to that Chevelle car wash video? I think Dennis could use it! --- Dennis Kiernan <[EMAIL PROTECTED]> wrote: > Please come by my place and wash my car. > -- > Dennis Kiernan > San Francisco > > __ Do you Yahoo!? Yahoo! Mail -

Re: [Chevelle-list] auto shippers

://links.chevelles.net/links/Information/Shipping/ - James --- Dan McIntosh <[EMAIL PROTECTED]> wrote: > Howdy all. > > I just purchased a car from Missouri (I;m in Ohio) > > I remember a few months back someone posted up a > really good experience with an auto transporter that

Re: [Chevelle-list] Flaming River steering columns

uldn't figure out if you need any special u-joint or not. Probably best to call em up and ask. Good luck, - James --- Graham Wooden <[EMAIL PROTECTED]> wrote: > Hi, > > Does anyone have experience of installing and using > their steering columns > before? > I picke

Re: [Chevelle-list] FW: Mail delivery failed: returning message to sender

chevelles.net archive): http://host.chevyteam.com/pipermail/chevelle-list_chevelles.net/ Another visit from the seedy side of the Internet... -James --- "Richard M. Pruett" <[EMAIL PROTECTED]> wrote: > Is any body else getting theses messages? I have up > to date virus

[Chevelle-list] help!

Hey; list members,,we, the wife & I, have owned a 1970 S.S.since Aug. of 71,,here's my problem,,in driving our other  various vehicles over the last few years,I've got to the point, where I just don't like the factory front bucket seats,,after sitting in the newer bucket seats of our other v

Re: [Chevelle-list] HTH Centerdrive chassis

Thanks Rick, that's a good idea. - James --- rick schaefer <[EMAIL PROTECTED]> wrote: > > That seems reasonable to me. Figure a frame at > $3-600, shortening it a couple hundred. See if you > can get them to include powder coating. It'd be > worth the try

[Chevelle-list] HTH Centerdrive chassis

as the cost of shortening an Elky frame and installation of the kit. Here's their website: http://hotrodstohell.net Thanks much, -James __ Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! http://promotions.yahoo.com/new_mail

  1   2   3   >