Sent: Tuesday, April 03, 2007 4:30 PM
To: chevelle-list@chevelles.net
Subject: [Chevelle-list] wiring harness
I have a 70 malibu that has recently been restored, but i used the original
wiring harness. After hooking everything back up the turn directionals,
dash lights, fuel pump, dome light,
replace anyway,, M&H makes good stuff.. Denny
>From: ken mabs <[EMAIL PROTECTED]>
>Reply-To: The Chevelle Mailing List
>To: chevelle-list@chevelles.net
>Subject: [Chevelle-list] wiring harness
>Date: Tue, 3 Apr 2007 16:30:24 -0700 (PDT)
>
>I have a 70 malibu th
ailing List
To: chevelle-list@chevelles.net
Subject: [Chevelle-list] wiring harness
Date: Tue, 3 Apr 2007 16:30:24 -0700 (PDT)
I have a 70 malibu that has recently been restored, but i used the original
wiring harness. After hooking everything back up the turn directionals,
dash lights, fuel p
bare metal on the frame.
Thanks,Dan Solomon Never be afraid to try something new. An Amateur built the
Ark, professionals built the Titanic. http://www.freewebs.com/chevelles1970/
Date: Tue, 3 Apr 2007 16:30:24 -0700From: [EMAIL PROTECTED]: [EMAIL PROTECTED]:
[Chevelle-list] wiring harness
I
I have a 70 malibu that has recently been restored, but i used the original
wiring harness. After hooking everything back up the turn directionals, dash
lights, fuel pump, dome light, fuel gauge, etc. either short out or stopped
working completely. Should I try and rebuild the harness myself a
If it is a 70 there should be a bolt right in the middle of the plug.
Once that is loosened (I don't recall if it comes all the way out or
if it is captured) Then you can unplug the harness. You may have to
wiggle and pull a bit, cause sometimes they get a bit cooked under
there and nearly
It has a long bolt in the center, look closer and you should be able to find it. good luck Eddie 66ss conv.[EMAIL PROTECTED] wrote: How does the wiring harness disconnect at the fire wall. does it just simply unplug or is there a latch or something holding it in. i've tried to unplug it but it
How does the wiring harness disconnect at the fire wall. does it just simply unplug or is there a latch or something holding it in. i've tried to unplug it but it does'nt seem to want to cooperate. Iam hoping to strip everything out of the engine compartment then have the car towed to a body sho
To: The Chevelle Mailing List
Sent: Wednesday, March 01, 2006 5:55
PM
Subject: Re: [Chevelle-list] Wiring
Harness Help - 66 Chevelle
Larry. I don't instantly remember where but I
have seen those for sale. Anyway, I have one from a 67 somewhere in my attic.
You are welcom
y results, so I cheated and bought the threaded ones. You
want my rivets?
Larry Shouse
- Original Message -
From:
Malibu65
To: The Chevelle Mailing List
Sent: Wednesday, March 01, 2006 5:29
PM
Subject: Re: [Chevelle-list] Wiring
Harness Help - 66 Chevelle
Hi Larry
bject: [Chevelle-list] Wiring Harness
Help - 66 Chevelle
Apparently, nobody makes or carries the
intermediate cable that goes between the tail light harness and the dash
harness. This would be the flat one that goes under the carpet.
Does anybody out there have an extra one in their
Hi Larry,
First question, is the intermediate cable for a 66 the same as a 65?
(I've got an extra one of those)
Second, how did it go with the grille rivets? Did you liked them? Where
did you get them?
Chuck K
Apparently, nobody makes or carries
the intermediate cable that goes bet
01, 2006 12:51 PMTo:
Chevelle ListSubject: [Chevelle-list] Wiring Harness Help - 66
Chevelle
Apparently, nobody makes or carries the
intermediate cable that goes between the tail light harness and the dash
harness. This would be the flat one that goes under the carpet.
Does
Apparently, nobody makes or carries the
intermediate cable that goes between the tail light harness and the dash
harness. This would be the flat one that goes under the carpet.
Does anybody out there have an extra one in their
parts car you want to sell?
Thanks,
Larry Shouse
[EMAIL PROTEC
Well, maybe. I don't think it is cheaper if they have to spend 30 to 60 minutes on
the phone working through questions and tracing wires while you are both on the phone,
which they have done with me 3 times.
I also know that they are real picky about producing only factory exact harnesses.
Ev
ginal Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dale McIntosh
Sent: Thursday, June 03, 2004 6:32 PM
To: 'The Chevelle Mailing List'
Subject: RE: [Chevelle-list] Wiring Harness
Sorry, I still can't buy it and sounds like a copout. Even if they don
Sorry, I still can't buy it and sounds like a copout. Even if they don't
know what combination it's going into the fact that they include all (I
assume) necessary wires to accommodate variations, their should be
instructions. If a wire isn't needed, say a tach wire or some relay wire,
it should s
iling List
Subject: Re: [Chevelle-list]
Wiring Harness
Check your voltage regulator to see if a wire is missing.
There should be a brown wire on one of the terminals for the gen warning light
in the dash.
Bob
- Original Message -
From: Crazy Rusty
4:01 PM
To: The Chevelle Mailing List
Cc: 'The Chevelle Mailing List'; Dale McIntosh
Subject: RE: [Chevelle-list] Wiring Harness
I asked one time and they said their were too many variations and too many
pages for each harness. They have them layered in a CAD system that didn'
input!!
- JB
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Bob
Sent: Thursday, June 03, 2004 9:50
AM
To: [EMAIL PROTECTED];
The Chevelle Mailing List
Subject: Re: [Chevelle-list]
Wiring Harness
Check your voltage regulator to see if a wire is missing.
There
I asked one time and they said their were too many variations and too many pages for
each harness. They have them layered in a CAD system that didn't lend itself to one
picture drawings.
Have any of you checked out this guys products (Ebay #7903793411). He says he has
them for SS's but when
Not knocking the mfg, but with all the accolades M&H seem to get, don't they
provide a diagram?
Dale McIntosh
2004 10:03
PM
Subject: [Chevelle-list] Wiring
Harness
I received an M&H Engine
harness, got it installed, and ran into one problem. There is a brown
wire, that comes out the same place as the wiper motor and coil wires, which I
dont know what to do with. It does
MAIL PROTECTED] Behalf Of
[EMAIL PROTECTED]
Sent: Thursday, June 03, 2004 10:50 AM
To: [EMAIL PROTECTED]; The Chevelle Mailing List
Cc: 'The Chevelle Mailing List'
Subject: Re: [Chevelle-list] Wiring Harness
Safest thing is to call M & H, they will know exactly what it is for. I had
a n
Safest thing is to call M & H, they will know exactly what it is for. I had a number
of wires that I didn't need when I replaced my harness, but most were for emission
control relays that I didn't need anymore.
Gene
--- Begin Message ---
I received an M&H Engine harness, got it i
iling List'
Subject: [Chevelle-list] Wiring
Harness
I received an M&H Engine harness, got it installed, and
ran into one problem. There is a brown wire, that comes out the same
place as the wiper motor and coil wires, which I don’t know what to do
with. It doesn’t show it in any of
I received an M&H Engine harness, got it installed, and
ran into one problem. There is a brown wire, that comes out the same
place as the wiper motor and coil wires, which I don’t know what to do
with. It doesn’t show it in any of my manuals or my wiring
guide. So, on the slight chanc
Rusty,
The Painless kits are good for hot rods and custom applications, but don't come with most of the sockets, connectors, etc.
We sell the Painless kits, but we alsocarry wiring harnesses made by M&H. We've found them to be the best quality, most-accurate reproduction wiring harnesses out ther
I would
recommend M&H (wiringharness.com).
-Original
Message-
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Crazy Rusty
Sent: Thursday, April 15, 2004
8:47 PM
To: 'The Chevelle Mailing List'
Subject: [Chevelle-list] Wiring
Harness Choices
Actually one more thing, someone please tell me they changed
the way the light bulbs plug into the gauges… those are very annoying
with the original harness.
JB
I got a little pissed off at an evasive wire grounding in the rats nest
that I call my dash harness… so I ripped the damn thing out. I have
never done this before so I am a little confused (and nervous). OPGI has
a few harnesses listed (Painless, factory-style, reproduction), but they don
Hi all,
I bought some harnesses from someone on here last
year.
I think it was Trevor from Auto
Obsessions.
If you're still on here, can you email
me?
I need a few more harnesses.
Dan McIntoshStreet Metal
FabricationsPavement Scraping 1964 Impala S.S.http://www.lowriderimpala.com
Hello all
I'm thinking my 69 needs new wiring, there are way too many
scotchlock splices and and wiring problems for my liking. My guess is it was
a race car and someone tried to rewire it after it was stripped down. Anyway
i'm interested in your opinions of different products.I'm th
33 matches
Mail list logo