Hi All,
A question on FDDI Neighborhood Information Frame that are used for discovering
Upstream
and Downstream Neighbors.
Does the station transmit this on both the Primary and Standby Rings so it goes in each
directions as I think or does it require interaction from receiving NSA's and some
Yes it can. Was there something that made you think it could not? As far
as I know, if the interface can run IP, it can run RIP.
> Does anyone know if rip can be run between two 2500 ethernet connections?
>
> Shawn
>
> _
> FAQ, list archives, and subscri
Yes it can. Assuming appropriate crossover cable and addressing of the link.
Idle curiosity. Recognizing that RIP updates will be sent out any interface
whose address has been entered into the RIP networking process, what would
lead you to believe it would not work as expected?
Experiment - set
Think of it as a hundred bucks, nothing else. Are you 'scared to death' of
losing $100.00?...probably not. :-)
>From: Jennifer Cribbs <[EMAIL PROTECTED]>
>Reply-To: Jennifer Cribbs <[EMAIL PROTECTED]>
>To: cisco <[EMAIL PROTECTED]>
>Date: Sat, 9 Dec 2000 19:37:22 -0500
>
>Hello Priscilla and
Dear Fellows,
I am pleased to inform all my mailing list friends that on friday 8th of
December, i completed my CCNP track by successfully passing Switching 2.0
with 912 marks. Thanks to all members of this list who helped me regarding
my enquiries for the exam. Now will be preparing for CCIE
Hello there :-)
There have been some interesting new updates to www.bensbookmarks.com
today:
New Links - (LINK CISCO) some handy new sites have been added under the
Accreditation Specific Section
New Books - (READ CISCO) new study guides have been published under. They
are at the top of the li
Hi,
Are you using NAT anywhere in the setup - NAT breaks some NetBIOS stuff,
particularly domain logons and NT trusts.
NAT meaning are you referencing the DC by a false IP address, or by it's
valid address.
If you are not using NAT, then forget about the IPSec, just think of it as a
router to r
Well Done!
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Waqar M
Sent: Sunday, December 10, 2000 4:06 AM
To: [EMAIL PROTECTED]
Subject: CCNP-Big day for me-passed BCMSN
Dear Fellows,
I am pleased to inform all my mailing list friends that on friday 8
Dear Group,
How do you setup a router as a TFTP Server?
What type of router provides this functionnality?
THANKS
Pierre-Alex
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations t
Hi Group,
How do you setup a router as a TFTP server?
Which routers support that feature?
Thanks
Pierre-Alex
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTE
First you must have enough FLASH memory to host multiple IOS images, or
you'll only be able to serve the image you are running on that particular
router.
#conf t
TFTP-Server FLASH
There is some goof with partitions & VIP's (depending on the router), but
this is the core command...
Good Luck !!
How come don't want to take the Beta exam instead?
"Andre' Paree-Huff" <[EMAIL PROTECTED]> wrote in message
016001c0614a$751c3170$[EMAIL PROTECTED]">news:016001c0614a$751c3170$[EMAIL PROTECTED]...
> I'll tell you on Tuesday after I return if I get to take it. I just
called
> again and they said
Last Call...
AGS+ (6 Serial/ 6 Ethernet/ CSC/4 with 11.0(22) EPROM's)
3102 (1 Serial/ 1 Ethernet/ 12.0(8) Enterprise IOS)
3102 (1 Serial/ 1 Ethernet/ 12.0(8) Enterprise IOS)
1 Cat5 Crossover Cable
1 Cisco Console Cable Kit
2 Ethernet Transceivers
3 Power Cords
2 Serial Cables (DTE to DCE, with DC
I just checked the Cisco Beta Exam area and it states that the beta is
closed as of 7 December.Does this mean the anyone who has booked for after
that day cannot write ?
_
Get more from the Web. FREE MSN Explor
Try www.fatbrain.com . This used to be The Computer Literacy Bookstore.
<[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Can anyone provide a site other than amazon that provides reviews on
books?
>
>
> Thanks
>
> Shawn
>
> _
>
My company is preparing to become a Cisco Premier Partner and one of the
requirements is to have people with the Cisco Sales Esstentials (CSE)
certification. The test is taken online via the Certification.net's site,
and is 50 questions & multiple choice with a passing score of 76%. It
sounds a
Sorry for my ignorant...i can't believe Robert Padjen is in this list too!
I am now studying his book to prepare for my CID Beta Exam :)
Robert Padjen <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I spoke with Sylvan and they report that the exam is
> offic
Hi all,
I finally managed to conquer MLS and VLANs, and I wanted to thank everyone
for their help.
I ended up completely nuking the config on the Cat and started over.
The new config worked from the very beginning. I suppose that there was
something lurking in the old config on the Cat that wa
Merry Christmas Everybody.
Ryan (AGE 5)
Do You Yahoo!?
Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
or your free @yahoo.ie address at http://mail.yahoo.ie
_
FAQ, list archives, and subs
I believe my feelings of incompeteness or fear or nervousness stem from the
fact that I am a housewife and have absolutely NO experience in the tech
world. My past jobs were just general working jobs that required no
education. I don't work at this time. I study and go to school and my husban
Hi all,
I am going to install a Cisco IDS system, the director that I am going to
use is the build in CSPM 2.2 one.
Does any body have any experience with that system that can share is
knowledge with me and give me some pointers.
I have installed the CSPM and got it to talk with the sensor but
It could mean that they were not taking anymore canidates after this date.
This seems to be what happened with the other betas.
Patrick
- Original Message -
From: "Shane Stockman" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, December 10, 2000 3:00 PM
Subject: CID Beta
> I j
Go to privilidged exec (router#) and type tftp-server /filename (need the
slash). The filename is the exact name of the IOS image you want to copy or
the alias name you gave it. Then you just tftp from the receiving box like
you always do.
>From: "Pierre-Alex" <[EMAIL PROTECTED]>
>Reply-To:
I would have thought after reading the books that you mentioned that you
would have studied. They were not helpful?
Bruce
""McCallum, Robert"" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
.uk...
> Well, well, well.
>
> With no studying for this exam the outcome was inevitable.
Hello friends
Could anyone who has used the MZMaker utility to compress IOS images =
tell me if I can use it to compress images for a 1600 router.
I have done it on a 2500 and it works great.
My 1600 has 4MB Ram and 6MB Flash and am not able to load large images. =
This is for a home lab so I am n
The Router gods have smiled...
I have been given some excess equipment to start a lab with. I am presently
pursuing my CCNP and would like to solicit some opinions as to what would be
the most beneficial configs for me to try and build? The Equipment:
2 Cisco 2621 routers
1 Cisco 2610 router
1 Lo
Thanks Phil!
Pierre
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Circusnuts
Sent: Sunday, December 10, 2000 5:10 AM
To: pierre; [EMAIL PROTECTED]
Subject: Re: TFTP
First you must have enough FLASH memory to host multiple IOS images, or
you'll only b
Sybex has a "CCNA Virtual Test Center" due out in January that has a fairly
in-depth section of questions that cover frame-relay and switching. All
questions are based on fundamental knowledge required to pass the CCNA. The
benefit though of these questions is in the explanations that have been
Can anybody give me an accurate account of the pass mark required for the
CCIE Routing and Switching multiple choice exam?
Thanks, Ben
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure viola
70
Louie
When I disagree with a rational man, I let reality be our final arbiter; If
I am right, he will learn, If I am wrong, I will; one of us will win, but
both of us will profit.
- John Galt
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Ben Darj
Dear All,
Thanks for your appreciation, i really need it. Well, i used Cisco Press
BCMSN course book, Boson test#1 which i think more than enough for the exam.
Moreover i used Cisco Online exams which really test your concepts. This was
all which i used. I had hands on experience with me which
I second that. Keep the 2621 and get some 2500's because the WIC ports for
the 2600 + RAM upgrades for Enterprise will kill you $$$ wise. My 2500's
have Compaq memory in them! The Local Director should be your Cash Cow.
You should be able to sell that unit for a good price.
-Eddie
-Origin
I had the same thing - wrong heading and a stack of security questions
(shame about that since security is not my strong point :-). I assume it
was the correct exam though - there were also a stack of questions that I
wouldn't expect to see on a security exam...
JMcL
peter whittle <[EMAIL PR
Interesting.
When I set up a router using basic-net3, a colleague warned me that it
would not show active until a call was placed - he didn't know why but that
was what he had experienced. When I set up the router, though, the
physical layer DID show active without a call.
If the behaviour depend
Hmmm, the way I read your request - a router as a tftp server, to my
knowledge you, can't.
You need another box for the server itself?
""Pierre-Alex"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi Group,
>
> How do you setup a router as a TFTP server?
>
>
Sorry for not specifying my questions. I would like to know how Asynchronous
Transfer Mode works and where I can get good information on the web? I
checked Cisco site, very detailed information (made for CCIE's...I think).
Can anyone help me? Thanks again.
PS-thanks Darren Ward for your reply.
"
Hello,
Let me re-describe the situation:
Central office 7100 router, site office PIX (NAT
overload 1 public ip address), IPSec tunnel is
establised, clients at site office can't logon NT
domain but can do everthing else.
Today, I replaced the PIX with a 3620 router (same
IPSec setup), everythin
Did you bother checking before you have that answer?
You can configure the network server to act as a limited Trivial File
Transfer Protocol (TFTP) server from which other Cisco servers can boot
their software. As a TFTP server host, the network server responds to TFTP
read request messages by s
An interesting idea here... And bear in mind I haven't tried using my PIX
as a DHCP server yet...
BUT You only have a maximum of 10 IPs you can use for a DHCP pool. You
are assigning them to the same netmask as your inside interface (I assume
this, the docs don't say anything one way or th
Hi Sam,
Images for the 800, 1000, 1600, 2600, 3600 ... are already compressed to run
from DRAM. You can't use the MZMAKER utility on these images.
MZMAKER was written specifically for the many 3000- and 2500-series systems
in use by our groupstudy peers. The 3000- and 2500-series routers don't h
Hi,
I have a copy of the Catherine Paquet book beside me. We here work in the field of
customer access and this book is used daily in real life situations. I presents a
bundle of useful info for details one forgets. I have found it the most excellent
book of all the books I have studied.
Prometric should never have scheduled you out past 07-DEC-00, I would call
them to confirm but in the past the closing date is the last date you can
sit the exam.
André Paree-Huff
A+, ASE, CCDA, CCNP
MCSE+I, NET+, I-NET+
[EMAIL PROTECTED]
[EMAIL PROTECTED]
AOL AIM: pareehuff
- Original Mess
Too many people already on the list for the Beta and I needed it to work on
a book I am doing.
André Paree-Huff
A+, ASE, CCDA, CCNP
MCSE+I, NET+, I-NET+
[EMAIL PROTECTED]
[EMAIL PROTECTED]
AOL AIM: pareehuff
- Original Message -
From: "GNOME" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.c
On Sun, 10 Dec 2000, Frank Wells wrote:
> Keep one of the 2621's and sell the rest. From the proceeds you could buy
> 5-6 2500 series routers and assemble a decent lab.
2610's aren't worth that much. I would keep it and use it for the other
half of "voice", if you are interested in that. A 261
On Sun, 10 Dec 2000, Ben Darji wrote:
>
> Can anybody give me an accurate account of the pass mark required for the
> CCIE Routing and Switching multiple choice exam?
Their is no set pass mark anymore. When you begin your test, a pass mark
is downloaded based on the pass marks of the previous 3
Does anyone know if it's possible to decompress an
mz IOS image? How is it accomplished? IIRC, it's
GNUzipped with an executable tag at the lead in of the
file.
Thanks for the help,
Chris M.
--- Paul Lalonde <[EMAIL PROTECTED]> wrote:
> Hi Sam,
>
> Images for the 800, 1000, 1600, 2600, 360
http://www.atmforum.com/
hth
Deepak
yohanus wrote:
> Sorry for not specifying my questions. I would like to know how Asynchronous
> Transfer Mode works and where I can get good information on the web? I
> checked Cisco site, very detailed information (made for CCIE's...I think).
> Can anyone he
After taken four exams in one month time, I've got my CCNP today.
personally I don't find it too hard at all. Intense, but not hard.
For all the four exams, I got 890-900, which is kinda ok considering I
was rocketing through these exams in one month :)
I'll start doing CCNP security next, hopefu
Beware of the MCSE 2000 Design Exams. They will demand the best of you.
Regards,
Pierre-Alex
MCSE,MCT,CCNA
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Randy Carlson
Sent: Sunday, December 10, 2000 8:45 PM
To: [EMAIL PROTECTED]
Subject: New CCNP
It was ugly (got 751 pass 706) but I just passed the Remote Access
(BCRAN) test and am now a CCNP!!! Next step CCDP(one test)/MCSE 2000
(pretty easy) then the CCIE drill (labs, labs, labs) (pretty hard)!!
--
MAJ Randy Carlson
Chief, Data Networks Branch, USMA
email: [EMAIL PROTECTED]
web: http:/
Holy crap Robin, that has to be the most blatant plug,
from a friend of an author, that I've ever seen! It's
morons like you that make Amazon reviews worthless.
How much did the authors have to pay you for you to
litter this list with your "stunning" review?
>Just an FYI for the group. I got
ok.. i just woke up and may be groggy, but what is a layer 2 cable?
*** REPLY SEPARATOR ***
On 12/9/2000 at 5:10 PM Gareth Hinton wrote:
>Layer 2 Cat 5 cables for sale.
>All MAC addresses configured identical (to make addressing system easy).
>Anyone interested?
>
>In defence
I have two routers. A Cisco 4000 (the TFTP server) and a Cisco2513 (the
client) This is what I did and what I got. What went wrong?
Cisco4000(config)#tftp-server flash:c2500-js-l_112-17.bin
Warning: flash:c2500-js-l_112-17.bin does not exist. Command retained
Cisco2513#copy flash tftp
System
On Sun, 10 Dec 2000, yohanus wrote:
> Sorry for not specifying my questions. I would like to know how Asynchronous
> Transfer Mode works and where I can get good information on the web? I
> checked Cisco site, very detailed information (made for CCIE's...I think).
> Can anyone help me? Thanks aga
What a blatant plug. According to his book Sean was a
System Administrator. How does that qualify him as
probably one of the most knowledgable Cisco
consultants ever to grace our presence. Last time we
heard from Sean Odom he loudly defending Todd Lammle's
latest crappy book. Sean Odom turned that
On Sun, 10 Dec 2000, Eddie Parra wrote:
> I second that. Keep the 2621 and get some 2500's because the WIC ports for
> the 2600 + RAM upgrades for Enterprise will kill you $$$ wise. My 2500's
> have Compaq memory in them! The Local Director should be your Cash Cow.
> You should be able to sell
My quick response is that the file name is incorrect somehow, but I'm not
completely sure. Try a dir command.
andy
On Mon, 11 Dec 2000, Pierre-Alex wrote:
> I have two routers. A Cisco 4000 (the TFTP server) and a Cisco2513 (the
> client) This is what I did and what I got. What went wrong?
>
Hi All
Sorry for the OT traffic, but I would like to get rid of a couple of extra
copies of IOS 12.0 IP only, for 2500 series routers. I know you can get them
on Ebay, but frankly the starting bids on those are higher than you can buy
it off the net for. So...
Here's the deal I have two copies,
I can't see any reason to apply a cynical explanation for someone's
admiration for an author's work. The admiration and good reviews may very
well not be based on friendship, as Stupid Idiot is assuming. They may be
based on professional respect. Even if they are friends, maybe they are
friend
Thanks Chuck. I'm sitting in a Days Inn in San Jose right now, waiting to
take my lab on December 13th. Unfortunately, I've made this journey alone,
as my company gives no support, financial or otherwise.
- Original Message -
From: "Chuck Larrieu" <[EMAIL PROTECTED]>
To: "Cisco Mail List"
I have to agree Priscilla, I personally have never met Carl Hagan, but he
was very cordial when my Switching book came out earlier this year. He liked
the way the book was written and provided some really welcome feedback for
me. One of my greatest fears when the book was written was that it was g
What's means flaps?
try to do a 'debug isdn q931'
then you will see the conversation between you 5300 and the voice switch.
You may also post the debug output here, then I can have a look.
Quncy
CCNP
Hong Kong
empire heights wrote:
> I have 1 as5300 with a voip dial-peer heading to my second as
Today I passed the BSCN (Routing 2.0) exam with a score of 896. This was the
last exam for me to become a CCNP.
Lots of question about configuring OSPF and EIGRP. Not much BGP as I was
expecting.
I studied Cisco Press BSCN book by Catherine Paquet and Diane Teare (ISBN
1-57870-228-3). I also stud
I know that story. Since I've been three times, without success, my company
has decided not to pay for any more trips. Good planning on their part,
after living and breathing the CCIE for the last year, I'm not going to drop
it. I have to admit it is a highly motivating factor in wanting to pass.
Ok, I got a 4500 and 4700 sitting here.
I gave the commands as listed and I got the same warning/error.
However, I noticed that in the running-config that the command was there.
I then tried to tftp from one to the other and it worked.
Kevin Wigle
- Original Message -
From: "Pierre-Al
I passed the CIT exam with no problems, and used the Cisco Press Book and
the one by Tom Thomas from McGraw Hill. I also purchased all of the Boson
Practice Exams. The Boson Exams were not as helpful as I thought they would
be towards preparing for the test.
"Hussam Adili" <[EMAIL PROTECTED]
Just wanted to commend Brian on an excellent explanation.
Whenever you start studying BGP (and advanced interior routing), and
things start getting confused, it's a good idea always to stop and
think:
am I dealing with TRAFFIC flow or ROUTING UPDATE flow?
>On Sat, 9 Dec 2000, Jennifer Me
hey Peter. how long were you asleep?
it's just a little jibe resulting from a "simple" thread that went all over
the place!
I had intended on asking if the cables could support at least 1024 macs (to
fit with my cat1912) but then I thought some people wouldn't see the
joke
have
Can you copy files to a router acting as a TFTP server other than IOS image
files? Say, startup configs for example. If so, please share the commands.
Also, what does the command tftp-server rom alias mean?
Cheers
_
Probably one where the strips are painted on and therefore sits on top of the colours.
On Sunday, December 10, 2000 at 09:40:22 PM, Peter Van Oene wrote:
> ok.. i just woke up and may be groggy, but what is a layer 2 cable?
>
> *** REPLY SEPARATOR ***
>
> On 12/9/2000 at 5:10
tftp-server flash:filename
This will make the file's available to be TFTP'd off
this Cisco router from another device. IOS doesn't
allow a way to just TFTP any file to the flash from
remote that I know of. You need to use the copy tftp
command from the CLI to put files on the flash. This
is for
Stupid,
I appreciate you reply. It caused me to take a closer look into your
comments and I came across this from Carl Hagan in May2000.
"Obviously, you have never met Sean Odom or heard him speak. He is
probably one of the most knowledgable Cisco consultants ever to grace our
presence. You k
Keep one of the 2621's and sell the rest. From the proceeds you could buy
5-6 2500 series routers and assemble a decent lab.
>From: [EMAIL PROTECTED]
>Reply-To: [EMAIL PROTECTED]
>To: <[EMAIL PROTECTED]>
>Subject: What to build?
>Date: Sun, 10 Dec 2000 13:11:23 EST
>
>The Router gods have smiled
73 matches
Mail list logo
