Argh! Still can't get the IOS to copy from tftp to flash!
In addition, here's what i got from #sh flash all command:
System flash directory:
No files in System flash
[0 bytes used, 16777216 available, 16777216 total]
16384K bytes of System flash (Device not programmable)
ChipBank
Hai,
I have taken the new routing 603 twice, there are a few questions in the
particular exam that I am unable to get the answer at all.
Is there a way, that I can post a similar question with out breaking the
NDA.
Thanks
Message Posted at:
Hello,
I have a test setup where in 2 remote VSATs are
configured as XPAD. An X.121 address is given to each
RS-232 port on the 2 VSATs. The SVC sessions of the 2
remotes are defined on a X25 device at the Central
Hub. Since this device cannot do switching, I have
connected a CISCO 2500 to the
Hello,
I have a test setup where in 2 remote VSATs are
configured as XPAD. An X.121 address is given to each
RS-232 port on the 2 VSATs. The SVC sessions of the 2
remotes are defined on a X25 device at the Central
Hub. Since this device cannot do switching, I have
connected a CISCO 2500 to the
Priscilla,
I have seen your knew book at Amazon.com.
I hope it will be like TDND though they say that the second book is
never like the first.
The first has got me through the scary CCDA today; hope your knew book will
do the same for Support. LATER!
I look forward to a copy, and Good
Hi mike,
Could be that IPSEC is being filtered out by one of the intermediary
providers. Would explain why your ike negotiation is working but ipsec
never gets established.
worth checking.
rgds,
C
- Original Message -
From: supernet
To:
Sent: Friday, August 02, 2002 3:08 AM
Speaking of Priscilla's books:
I've recently bought TDND as it was recommended as a great study guide for
the CCDP, CID exam.
However, now that I've got it, it seems everyone is suggesting it as the
study guide for the DCN (640-441), CCDA exam.
Perhaps those in the know (*ahem*...Priscilla
Actually, Priscilla's book is about Designing Computer Networks, the Proper
Way NOT a Certification Guide, as she said herself. I totally agree with
her.
Why is this important? Because the CCDA exam follows some rigid procedure
which can easily get you mixed up if you mix many books!
Did you check her website?
Lots of information on troubleshooting there.
www.priscilla.com
[EMAIL PROTECTED] 08/02/02 10:47am
Speaking of Priscilla's books:
I've recently bought TDND as it was recommended as a great study guide for
the CCDP, CID exam.
However, now that I've got it, it
Hi
1) You can use either P2P, Physical or P2MP. Beware of Split horizon here
depending on your routing protocol
2) you can use either frame-relay map statements to map your layer2 dlci's
to your layer3 ip's, or you can use inverse-arp. Do some research on both
3)bandwdith is a must for eigrp
To solve a problem, as a hack, I used HSRP to create a virtual MAC
address that just applied to *1* subinterface on an ISL trunk. The rest
of the subinterfaces use the BIA.
To try to clean this up, is there any other way to use a virtual mac
address on a subinterface? I noticed I don't have
I not sure what code your using, but Cisco recommend using Access-lists
instead of conduit statements. Just create a typical cisco access-list
(except don't invert your masks) and apply it inbound to the outside
interface and you will get the same result as your conduits!!
C
- Original
Hi,
Just wondering why you have to specifically open the ports 500, 50, 51.
I have installed IPSec VPNs with PIX and Routers. I have never opened any
port. Infact we have a VPN setup in my office itself. You believe me or not,
with default ones it worked smoothly.
Also according to Mike he
TDND can be used for both exams. TDND is actually better suited to the
revised CID exam than the CID Study Guide. And that's pretty much the
feeling
of a lot of people that took the CID 3.0 exam...
It's a good book. I'm glad I finally had the time to go through it.
Priscilla's one of my
I am getting nipped by this today, and its more than just VPN that is
affected. Latest 12.2.8T5, too :-(
CSCdw84776
When a customer edge (CE) router advertises a route that contains the
provider edge (PE)-CE
link, the PE router fails to install this route to the virtual
private network
I just signed up for all three Cisco Security exams! I thought this was
a joke, but it is true!
Managing Cisco Network Security
Cisco Secure Pix Firewall Advanced
Cisco Secure Virtual Private Networks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=50532t=50532
Jimmy,
(watch for URL wrap)
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/ffun_r/ffrprt3/frf013.htm#1068334
Introduced in 11.2 IOS.
The DDTS that implemented the command (CSCdi47180) shows integration in
10.3(12), 11.0(8), 11.1(3), and 11.2(1).
Thanks,
Shawn
Jimmy
Your flash is probably bad. I recently had a problem with some new flash
and had to return it because half of it was uneraseable. I never found
documentation or a solid answer for my error messages.
All Flash chips on a stick should be identical (or at least detectable I
guess).
Message
The 3 Cisco Security test I was talking about are from the Free Beta. I
forgot to say that.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=50536t=50536
--
FAQ, list archives, and subscription info:
Hi Silju,
If my understanding of IPSEC is correct... his initial IKE (isakmp)
negotiation - phase-1 exchange has completed, this is used to set up the
exchange of the IPSEC proposals -- phase-2. So since phase-1 negotiations
succeed (isakmp - udp500) but phase two proposals are never obtained
You can use the single IP address on your outside interface without a
problem.
If your outside address is 200.200.200.200 and you have a mail server on
your inside 10.1.1.1 and a telnet server on your inside 10.2.2.2, you can do
this:
static (inside,outside) tcp 200.200.200.200 smtp 10.1.1.1
I used to subscribe to the theory that by listing your certs, you somewhat
shield yourself from flaming and criticism. For example, if a regular dude
with no Cisco knowledge bashes Cisco, you could dismiss him as just a crank
and people could justifiably flame him, etc. etc.. But if he's a
Hi all. I was wondering if anyone has seen this before and could offer some
advice.
I have four routers, connected as follows.
ISP1-ebgp-EdgeRouter1-ibgp-Core1-OSPF-Core2
EdgeRouter1 is advertising a Default route and a single /24 to Core1.
Core1 is using default-info Originate to copy the
Does anyone know if this Fast Ethernet card is plug and play to when
installed in a 7206 router? Also can you installing it without powering the
router down and taking it offline?
thx
Randy
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=50540t=50540
What does a show IP ospf data show?
You can do a show IP OSPF data | include 10.20.30.40 to check the ospf
database for the routing entry there ( assuming 10.20.30.40 is your /24 of
course )
Thanks
Larry
-Original Message-
From: Ejay Hire [mailto:[EMAIL PROTECTED]]
Sent: Friday,
try some router rental labs that you can access
online. there are some links on the groupstudy home
page itself.
--- a. ahmad wrote:
Dear All,
Thanks for some valueable suggestions. One more
thingif one is willing
to be a great networker, young, energatic but unable
to get hands on
Yes as long as you have the IOS that supports it and it is hot
swappable.
Dave
McHugh Randy wrote:
Does anyone know if this Fast Ethernet card is plug and play to when
installed in a 7206 router? Also can you installing it without powering
the
router down and taking it offline?
thx
Hi all,
I am trying to conserve IP addresses by using private IPs for dialin users.
From clients I can dial in to network but cant get beyond 3640 NAS, cant
even ping e0/0. From 3640, I can ping connected client and any host on
Internet. From 2611 Internet gateway, I can ping 3640 e0/0 and
I have a customer who is going to be using the WS-G5483 GBIC. This
requires catOS 7.2. I have not yet loaded 7.2. Anyone out there
running 7.2?? Good, bad or indifferant?!
Thanks
Dave
--
David Madland
Sr. Network Engineer
CCIE# 2016
Qwest Communications Int. Inc.
[EMAIL PROTECTED]
[EMAIL PROTECTED] wrote:
Speaking of Priscilla's books:
I've recently bought TDND as it was recommended as a great
study guide for
the CCDP, CID exam.
However, now that I've got it, it seems everyone is suggesting
it as the
study guide for the DCN (640-441), CCDA exam.
Perhaps
... to pass!!! :)
Just came back from my Vue Testing Center where I took the 350-001 today... I
got a 73% grade, which is not very good, but it is good enough to get a PASS
:)
I'd like to thank everybody for all the information shared here on this
group,
it was very helpful... hopefully, it
Well, In the first lot, this is what I get:
Sydney = 10.64.0.0 - 10.64.7.255
Melbourne = 10.64.0.0 - 10.64.1.255
Brisbane = 10.64.0.0 - 10.64.1.255
I.E your addrersses supplied are host addresses, not network addresses.
Your second lot is
10.64.0.0 - 10.64.7.255
10.64.8.0 - 10.64.9.255
what is a promo code , where did you get it for the all three exam , I was
trying to register but no promo code ?
Rahul
Brian Zeitz wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I just signed up for all three Cisco Security exams! I thought this was
a joke, but it is true!
Can you send me the promocode for registering the css1 exams?
Rahul
ccnp,ccna,
[EMAIL PROTECTED]
Brian Zeitz wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I just signed up for all three Cisco Security exams! I thought this was
a joke, but it is true!
Managing Cisco Network
I would agree in their suggestion to use ACL's instead of conduits. What
you want to look up is actually called port redirection.
John Kaberna
CCIE #7146 (R/S, Security)
Ole Drews Jensen wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
You can use the single IP address on your
I guess the Flash are bad then :(
Thanks for the comments Paul KW :)
Now, where can i get some flash..hmmm.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=50552t=50512
--
FAQ, list archives, and subscription info:
I sent it to you already!
OR A LIMITED TIME
FREE CISCO SECURITY CERTIFICATION BETA EXAMS
Use these Promotional Codes to take them for free
From August 2nd through 22nd, the first 300 candidates to take each of
these
3 new Cisco security certification BETA exams can do so AT NO COST:
Managing
HI Ciaron,
I totally agree with you that Phase-1 is completed in Mike's setup.
But I would like to discuss some points. The problem I think is in phase-2
only.
1. Normally if your end-to-end traffic has to pass the ISP (public network)
then you create a VPN tunnel. ISPs doesnt block any
HI Fabil,
Its very difficult to explain unless you give the exact scenario.Normally
you configure an access list for the VPN traffic and deny the NATing using
nat (inside) 0 access-list command.
Try the below link. You will find all the configurations there.
HI David,
I have a link for you. It may help you a bit. It says NAT the existing
addresses to a different address at both sites (although the document says
one bcoz of the concentrator).
http://www.cisco.com/warp/public/707/vpn_pix_private.html.
If you are trying this ust tell me if it works
Passing on something sent to me by a Cisco Channel SE.
FOR A LIMITED TIME
FREE CISCO SECURITY CERTIFICATION BETA EXAMS
Use these Promotional Codes to take them for free
From August 2nd through 22nd, the first 300 candidates to take each of
these
3 new Cisco security certification BETA exams can
Richard,
You need to boot the 2501 router into RXBoot mode before you can Upgrade the
IOS in Flash.
Visit this CCO URL:
http://www.cisco.com/warp/public/130/sw_upgrade_proc_flash.shtml
Here is probably the cause of your problem:
Richard,
You need to boot the 2501 router into RXBoot mode before you can Upgrade the
IOS in Flash.
Visit this CCO URL:
http://www.cisco.com/warp/public/130/sw_upgrade_proc_flash.shtml
Here is probably the cause of your problem:
I've been ordering from this guy for almost 3 years.
PC Wholesale [[EMAIL PROTECTED]]
Prices are great and I've always received my orders in just a few days.
All the best !!!
Phil
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 02, 2002 3:45
Thanks for the heads up. I was signing up this evening to take the
existing CSPFA over the weekend. So I gave myself an extra week in hopes to
save $200 CDN.
The MCNS looked to good to turn down at that price. So I will see if
squeaking by can be acheived. I have 20 days to go over the blue
I have to agree that TDND is a very good book overall and the added benefit
to the book is it will help people study for their
design exams.
I have to compare this book to many of Mark Minasi's NT/2000 books, and
although he does not write the book to specifically help you prepare for the
MCSE,
Now onto the lab :)
Kim
From: Persio Pucci
Date: 2002/08/02 Fri PM 03:17:07 EDT
To: [EMAIL PROTECTED]
Subject: not very good, but good enough... [7:50547]
... to pass!!! :)
Just came back from my Vue Testing Center where I took the 350-001
today... I
got a 73% grade, which is
Hi Silju,
I would have to disagree with you one point, or perhaps modify your
statement -- Normally ISP's don't filter IPSEC, but some do -- I know
this from personal experience. Granted the ISP in question didn't know they
were doing it (misconfigured access-list).
I remember reading
Hi,
How are your setting a default route for this pix firewall?
- Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=50565t=50449
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
All,
Looking for a book that will cover OSPF in detail outside of the BSCN book.
I recently purchased Internet Routing Architectures to give me more
detailed knowledge of BGP, but need to round out the OSPF with another book.
Any advice?
Thanks
Rob Cluett, CCNA
Message Posted at:
Might consider this one:
Cisco OSPF Command and Configuration Handbook
by William R. Parkhurst
I haven't read this one myself, but according to the reviews it is written
in the same vein as his BGP book, which I believe is a far better way to
learn the knobs.
HTH
Robert D. Cluett wrote in
www.memorydealers.com
They have a very good price and very reliabletake a look...
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Phil Lorenz
Sent: Friday, August 02, 2002 6:42 PM
To: [EMAIL PROTECTED]
Subject: RE: 2501 IOS Flash! [7:50512]
I've
AGGG !!!
Back to the very first post... if this router somehow is booting with a
run from FLASH IOS, you cannot upgrade it in normal operating mode.
The 2500 started many many years ago, with run from RAM IOS. Run from
RAM meant the FLASH is more of a repository for the compressed IOS code
The Cisco Press OSPF book by Tom Thomas would go great with Dr. Parkhurst's
book as well.
- Original Message -
From: Chuck
To:
Sent: Friday, August 02, 2002 10:04 PM
Subject: Re: Cisco Press OSPF? [7:50567]
Might consider this one:
Cisco OSPF Command and Configuration Handbook
by
I don't care about a SmartNet contract. Will a standard, fast-page with
parity SIMM chip work with a 2500 series router? Am I asking for trouble if
I don't get a for Cisco 2500 series ram?
I found this chip for $6: 16 MB SIMM FAST PAGE with PARITY (4X36) 72 PIN
Thanks,
Jack
Message Posted
Group,
In reading the BSCN book, I have stumbled across something confusing when it
is discussing route reflectors. The books states that the use of route
reflectors eliminates the need to run BGP in a full mesh environment. Based
on this statement I have assumed that BGP therefore must be
only the iBGP speakers must be in a full mesh - not necessarily the entire
network.
Robert D. Cluett wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Group,
In reading the BSCN book, I have stumbled across something confusing when
it
is discussing route reflectors. The books
57 matches
Mail list logo