yes, alot of traffic is flowing through :-) and no wasn't related to any
kind of attack.
The 18mpps or 48mpps is more to do with the switch fabric, not related to
the tx rx buffer(s) that are allocated per port.
the issue was immediately resolved when i hard coded port settings. just
wanted to
yes, you will have to use a separate entry for each.
-Original Message-
From: Han Chuan Alex Ang [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 16, 2003 10:28 PM
To: [EMAIL PROTECTED]
Subject: Netbios on Wan [7:61249]
hi, wondering if it is possible to configure more than 1 ip for IP
Maybe that message is coming from the Boot, which is older it two of the
routers. I see it ocassionally, but it doesn't harm, since as soon as
correct IOS loads, later on the boot process, the sentence will be
understood.
What I don't understand is the reason of the reloading... What can you se
I was testing the sample config on the cisco web site at this page :
http://www.cisco.com/warp/public/471/ipsecrouter_vpn.html
I do not know what IOS for 2611 can take the following commands:
cisco is saying 12.2(8) and later.
crypto isakmp client configuration group 3000client
key cisco123
dns
Here is my current scenario-
I have a 3640 RAS router at my HQ and 1x1700 routers at a remote site.I want
to add another router to another remote site but use the same ethernet
segment on DHCP.I have a Win2000 server doing DHCP for the 1 remote router.
On the DHCP server I want to split the segm
Hi all,
I also need the same help. Can I have sample configuration any one did it.
can someone tell me any source where i can find the details.
Thanks/Regards,
K.Srinivas
- Original Message -
From: "Newell Ryan D SrA 18 CS/SCBT"
To:
Sent: Friday, January 17, 2003 10:31 AM
Subject: RE:
I believe that NetFlow can be used to provide this information.
""Semih \st|n"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...> Greetins all,
>
> We are currently using nat in our network. I want to monitor the bandwidth
> usage per ip.
> And also the traffic type they generate.
>
try IOS Version 12.2(11)T3
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61260&t=61256
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAI
Well..well..well.. in a way I feel like idiot.. but in another it was a very
much a learning experience.
After checking over everything and recreating the 800mS to 2 second delays,
I found the problem.
When I first set up the lab, I spent some time working with the debugs for
ipsec, isakmp and ic
Great!! This looks like it will fill the bill. I'll set the configuration
as noted. This will give me some time before I can configure a TACACS+
server.
Thanks to everyone for their responses.
Dave Williams, CCDA, CCNA, CCSA
Director of Network Engineering
(402) 661-2143
-Original Message
what does the IP opportunistic do?
""Clayton Price"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> That is correct, your vip does not have to be a part of one of the VLAN's.
> Make sure you have ip opportunistic enabled, and that you are routing that
> VIP towards the CSS.
>
> Cl
Hi guys,
I have a 3550-12G that is connected to 5 switches.
There are also a 3640 and a 2600, that share an HSRP address, and both
of these routers are connected to one of the switches hanging off the
3550-12G..
>From the 3550-12G I can't ping the HSRP address, but can ping the
physical address
I do know how to convert Hex and Decimal frontward and backwards. I only
asked the question just to speed up the process, since time is of essence on
any Cisco test!!
-Original Message-
From: Dain Deutschman [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 16, 2003 3:54 PM
To: [EMAIL PR
""Francisco Sedano/Inf-Pronet"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Maybe that message is coming from the Boot, which is older it two of the
> routers. I see it ocassionally, but it doesn't harm, since as soon as
> correct IOS loads, later on the boot process, the sente
You can use pdm ( Web based gui of Cisco PIX). It looks like checkpoint gui.
You can insert lines between other statements, change nat definitions,
monitor system resources etc. It is very useful.
Ozan Akdemir
-Original Message-
From: Sam Sneed [mailto:[EMAIL PROTECTED]]
Sent: Tuesday,
Greetings all,
I'm looking to test a large ACL impact on a router and wondering if any
of you have or know of an already made list some where that I can use.
Thanks...Nabil
"I have never let my schooling interfere with my education."
Message Posted at:
http://www.groupstudy.com/f
I can only apply service-policy out "name" to the main interface but not to
sub interfaces. Can some one tell me if it automatically applyes to sub
interfaces.
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61269&t=61269
---
Hi Frederico,
Yes, You you need to use :
Interface e0 (for eaxample on remote router)
ip helper-address 172.16.2.255
(to reach all servers on subnet 172.16.2.0 from the remote routers)
Hope this helps
Sarkis
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61270&t=61249
---
Hi all --
Does anyone have a recommendation for online lab rental for the PIX and VPN
courses for the CSS1. Today is the last day to register for the old exams
and I'm considering making the effort to take the exams.
Thanks in advance.
Greg Macaulay
Oldest Human Being preparing for the CCIE Lab
There is a PIX available on my rack free of charge at http://www.mymucus.com
It is an older PIX 1 Running 5.1(5) But you can you use it for most of
the course. I'm working on adding a 501 to the rack.
Hope this helps
Jarett
""Greg Macaulay"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL
Shane Stockman wrote:
>
> Here is my current scenario-
> I have a 3640 RAS router at my HQ and 1x1700 routers at a
> remote site.I want
> to add another router to another remote site but use the same
> ethernet
> segment on DHCP.I have a Win2000 server doing DHCP for the 1
> remote router.
>
> On
The Long and Winding Road wrote:
>
> It's getting to where I actually wish troubleshooting would
> come back to the
> lab ;->
>
> had two routers go into endless reload tonight when I turned a
> few on to get
> some more practice.
>
> after going through the password recovery procedure for both,
I would like to apologize as the GroupStudy database crashed thus preventing
any postings for the past 20 hours or so.
Tonight I performed an upgrade to the database in the hopes it will increase
reliability. Please resend any messages that do not appear on the site.
Sorry!
Paul Borghese
Mess
Yes, According to Cisco BSCN Book (Building Scalable Cisco Networks)
pages 88-91.
and Exam Cram book ACRC (Advanced Cisco Router Congirn) pages 46-47.
mentions using ip helper-address to forward to a directed broadcast address
(ie. for this specific subnet 172.16.2.0 where the servers reside)
Reme
Hi Geoff,
Just a small possibility
Double check on what circuit is termining on the physical interfaces. What I
mean to say is, if the two ends are not connected to the same circuit
physically too, it might show you up/up (due to some other ends
connectivity) but it won't be the result what
How to configure a PC (win2K prof.) for testing DLSW in lab?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61291&t=61291
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct an
Hi everybody,
Today I have encountered a strabge problem. I have a 3660 router with
NM-16AM modules. Nothing has been changed. Suddenly we got complains from
users tht they cannot connect. I have checked the AAA server. But there is
nothing wrong. Here is my debug log:
27 matches
Mail list logo
