Dynamic Configuration Tool:
http://www.cisco.com/appcontent/apollo/configureHomeGuest.html
Mark
CCIE R&S, Security
Lab Technician
GigaVelocity.com
- Original Message -
From: "Hinwoto"
To:
Sent: Wednesday, September 10, 2003 9:03 PM
Subject: How to define right cisco hardware and softwar
Hi Zsombor, what do you mean?? Why the router has the broadcast IP in
"receive" mode?
I would like to know more about this ;)
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=75224&t=75161
--
**Please support GroupStudy by purchasi
help
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=75225&t=75225
--
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and subscription info: http://www.groupstudy
Dear All,
In my network MPLS VPN is there and the cisco
devices having 7513,6509 and GSR. but in topology i am
not getting 6509 which is having OSM-4ge-wan card and
i can't detect the module in topology services.
i have installed related pathches like CLiparaser,
catios6000, switchaddlets
I stopped buying long ago except isdn pbx,
"basics" on routers at home,
and started renting a few low budget ATM/VOICE etc. labs online.
Martijn
-Oorspronkelijk bericht-
Van: Dave Williams [mailto:[EMAIL PROTECTED]
Verzonden: dinsdag 9 september 2003 22:31
Aan: [EMAIL PROTECTED]
Ond
Saw some on the group a few weeks ago.
Martijn
-Oorspronkelijk bericht-
Van: Fred Wittenberg [mailto:[EMAIL PROTECTED]
Verzonden: woensdag 10 september 2003 20:15
Aan: [EMAIL PROTECTED]
Onderwerp: Cisc SAFE Exam [7:75200]
Hello all,
I'm planning on taking the SAFE exam to wrap up my C
Hi,
I was wondering whether it's worth reading the new Cisco Catalyst QoS IOS
book whilst revising for the CCIE theory or even perhaps the practical exams.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=75229&t=75229
--
**Please
CCO customer? login
http://ftp.cisco.com/cisco/lan/catalyst/4000/cat4000-releasenote.8-1-2.pdf
2
Release Notes for Catalyst 4500 Series Software Release 8.x
OL-4502-02
ROMMON Requirements
If the Boot ROM (ROMMON) loaded onto your switch is version 4.5(1) or
earlier, you need to upgrade
the ROMM
Did you read trough the
http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1829/products_feat
ure_guide09186a0080087c60.html
12.0
BGP Received Routes MIB
http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1839/products_feat
ure_guide09186a0080110bbc.html
12.2T
BGP 4 MIB Support for
Easy did a zillion times for the "sysadmins".
IE settings hack. trough a .reg file in the login script. (per user or group
dep on your directory/kix)
so do NOT use proxy for this and this anbd this webserver
Martijn
-Oorspronkelijk bericht-
Van: Steiven Poh [mailto:[EMAIL PROTECT
So maybe permit and route to null0 in some cases? Then no unreachables are
generated because there is a "route"?
Martijn
-Oorspronkelijk bericht-
Van: Marty Adkins [mailto:[EMAIL PROTECTED]
Verzonden: dinsdag 9 september 2003 20:29
Aan: [EMAIL PROTECTED]
Onderwerp: Re: router CPU utiliz
Hello all
Can I know what is the Cisco PIX and that of a Cisco
VPN 3000 in terms of performance?
As I am planning to implement VPN with either VPN
Concentrator or PIX,however I was told that if you
implement only VPN Concentrator instead of PIX ,then
you may get VPN connectivity but you will not be
got your email address from the web: do you answer cisco related questions
by any chance: know any one who is willing to?
-
Yahoo! Search
- Looking for more? Try the new Yahoo! Search
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=75237&t=7
I have a customer that has a small office with a Cisco 56K Frame router.
They
are running Nat. Now when I plug in the frame side the ethernet side gets
constant request for translation then it gets to the point where you can no
longer even ping the ethernet side. If I remove the RG45 cable from t
problem?
Paul Borghese wrote:
> help
> **Please support GroupStudy by purchasing from the GroupStudy Store:
> http://shop.groupstudy.com
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=75240
Hello,Does any one if there is a way to get the solutions for the Solie
Labs from CCIE PS Vol. I?Thank you.
Use custom emotions -- try MSN Messenger 6.0!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7
Stnadard answer: it depends.
Followed immediately by the standard question: what problem are you
trying to solve?
The VPN Concentrator does not firewall or filter; it is a specialized
tunnel termination device. You may (emphasis on may) need to use it
when you are terminating more than about 2
If you mean the labs in the back of the book, you can download the solutions
at www.ciscopress.com. Look up the book then under "More Information", click
on "downloads".
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=75242&t=75239
Scenario III is probably the most recommended. It is incorrect to say that
the VPN Concentrator does not have filtering capabilities. It generally
only allows traffic in its public interface necessary for VPN connections,
so it is not any more inherently insecure as a PIX. It does not have all o
If you happen to be running PIM Sparse-Dense mode with auto-RP and
"duplicate" loopback IP addresses then you need a special patch for
CiscoWorks in order for it to properly discover the 6509's... This probably
effects anything that has "duplicate" loopback IP addresses.
Fred Reimer - CCNA
Ecli
This is from Solie's book:
The name in Netbios lists is compared with the source name field for Netbios
commands 00 and 01 an is comparted with the destination name field for
Netbios commands 08, 0A and 0E (datagram, name-query, name recognized).
Message Posted at:
http://www.groupstudy.com/form
Yes I do and how can I contribute to your good cause?:)
Thank you
Ollie
AT&T Common Backbone
866-397-7309 Opt 1
-Original Message-
From: Accsystest [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 11, 2003 6:33 AM
To: [EMAIL PROTECTED]
Subject: question? [7:75237]
got your email ad
Maybe also sniffer (distributed), nice reports, ready for excel or the
beamer (CEO-ready.. ;-))
Martijn
-Oorspronkelijk bericht-
Van: Lupi, Guy [mailto:[EMAIL PROTECTED]
Verzonden: donderdag 4 september 2003 19:17
Aan: [EMAIL PROTECTED]
Onderwerp: Network Benchmarking/Performance An
Oops! I am moving the mailing list users to a new server and was testing
the new server. I inadvertently sent one of the test messages to the active
list. At 3:00 AM when stuff is not working, yelling "help" does not seem
like a bad idea :-).
By the way, the move should be done by this afternoo
Different approach:
Howmany clients? Static Nat on the router the other way around?
Give the server a route pointer to the nat router for the client.
You even can choose to give the client a global ip to connect to the server
with, like a mail server for example.
Martijn
-Oorspronkelijk
Hello people..
I have at home Cisco Press Certification Library for 640-50* Exams. I did
not present the Exam on the dates because political problems in my country.
Now Cisco has change the exam content and this book in my opinion seems not
to fit very well.
I am willing to change all this PDF wi
It will say multicast.
Martijn
-Oorspronkelijk bericht-
Van: Devrim Yener KUCUK [mailto:[EMAIL PROTECTED]
Verzonden: maandag 8 september 2003 16:38
Aan: [EMAIL PROTECTED]
Onderwerp: Re: OSPF demand-circuit does not work [7:74954]
what do you see when you do "sh dialer" on the calli
Does anybody have a link to the NMC software that i have heard mentioned or
have it available thru ftp ??
Cheers Mark
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=75251&t=39556
--
**Please support GroupStudy by purchasing from t
Broadcast means everybody receives it.
Curious wrote:
>
> Hi Zsombor, what do you mean?? Why the router has the broadcast
> IP in
> "receive" mode?
> I would like to know more about this ;)
>
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=75253&t=75161
--
[EMAIL PROTECTED] wrote:
>
> I have a customer that has a small office with a Cisco 56K
> Frame router. They
> are running Nat. Now when I plug in the frame side the ethernet
> side gets
> constant request for translation then it gets to the point
> where you can no
> longer even ping the ethernet
Trying to do a lab that connects two ethernet lans together via L2TP v3.
Cisco has diddly for config examples. Does anyone have any that work?
Here is what I have so far. (shown below)
Topology:
pc1--lan1---fa0/0-router1-fa5/0--tunnel-fa5/0-router2-fa0/0---lan2--
pc2
Configs:
VitalNet from Lucent Technologies can use Cisco SAA, so in a way it's
distributed polling. Any (recent) IOS device would become a
sensor/collector.
Fred Reimer - CCNA
Eclipsys Corporation, 200 Ashford Center North, Atlanta, GA 30338
Phone: 404-847-5177 Cell: 770-490-3071 Pager: 888-260-2050
Hi,
How do you write an ext acl to block telnet access from even addresses in
subnet 192.168.2.0/24 (i.e, .2, .4, .6 etc) to server 192.168.1.254?
thks,
yongwee
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=75258&t=75258
--
Hi,
How do you write an ext acl to block telnet access from even addresses in
subnet 192.168.2.0/24 (i.e, .2, .4, .6 etc) to server 192.168.1.254?
rgds,
yongwee
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=75257&t=75257
--
Hello people,
I am sitting the exam on next Monday (22nd September). Has anyone taken the
exam recently? I just want to know what the passing score is. Thank you.
Cheers,
Kenan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=75259&t=75259
---
Here is an example of a named ACL to Block Specific even HOST sources to
destination port 23 to the address you specified. You can use:
ip access-list extended BLOCK_TELNET_EVEN
deny tcp 192.168.2.0 0.0.0.254 host 192.168.1.254 eq telnet
permit ip any any
Just practice and play wi
All-
I have a CBOS IOS on a CISCO Router ( 600 series). I am trying to make this
router a filter router. When I implement the rules below, nothing comes
across. I have checked the documentation, but still can't find the solution.
Does anybody have any ideas?
Your help is well appreciated..
s
I'll bet the trouble started when the Nachi worm started spreading. It uses
pings to find hosts to infect. See the following to see what happens to NAT
when pinged from the outside.
http://www.cisco.com/warp/public/556/4.html
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PR
Yongwee,
!
! Deny even numbers but permit everything else
!
access-list 101 deny tcp 192.168.2.0 0.0.0.254 host 192.168.1.254 eq telnet
access-list 101 permit any any
! implicit deny all here
!
!
or perhaps more efficiently
!
!
! Permit odd numbers only
!
access-list 101 permit tcp 192.168.2.1 0.
Communications problem. I don't understand what you are asking. Try using
more words. Be verbose. I may be able to understand then...
As far as I can tell:
You are not having any problems discovering the 6509. It is in the
topology. In your original messages, you said you were NOT getting th
I just had mine working.
Cola#show run
Building configuration...
Current configuration : 2615 bytes
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
no service single-slot-reload-enable
!
hostname Cola
!
redundancy
no keepalive-enable
m
For the SAAgents embedded in the IOS, use the IPM (Internetwork Performance
Monitor) software. It comes as part of the CiscoWorks package. I don't
know if you can buy it as a standalone package. It includes a plug-in to
CiscoWorks and a client to install on the pc. It's much easier to configure
hi reimer,
Thanks for ur reply but not getting wht u want to
say. coz i told u i install , CATIOS6000 , Entity ,
Switchaddlet, CLIparser still i can't see i mean it is
coming intopology but with ? . so pls suggest me
Thanks & Regards,
Milind Tare
--- "Reimer, Fred" wrote:
> If you happen t
As multiple single entries - you can not summarize these...
A better way is to have all the specific users that must be denied to be in
a summarizable subnet
-Original Message-
From: Yong Wee [mailto:[EMAIL PROTECTED]
Sent: 11 September 2003 17:30
To: [EMAIL PROTECTED]
Subject: question
You would have to do each host individually as:
access-list 110 deny tcp host 192.168.2.2 host 192.168.1.254 eq 23
You cannot choose only even addresses with any kind of command. Atleast not
that I am aware of.
-Original Message-
From: Yong Wee [mailto:[EMAIL PROTECTED]
Sent: Thursday,
hi reimer,
Thanks for ur reply, and extremely sorry for mis
communication. i will explain u my porblem.
I install ciscoworks. I have GSR,7513,6509,3512 in
my network. but in topology view i can see
7513,3512,and GSR.
I install CATIOS6000,Switchaddlets,Entity,
CLIparser.
about 6509 th
Ive got them here (along with my review of the book)
http://www.optsys.net/cciepractreview.htm
thanks,
-Brad Ellis
CCIE#5796 (R&S / Security)
Network Learning Inc
[EMAIL PROTECTED]
www.ccbootcamp.com (cisco training)
""Cisco Nuts"" wrote in message
news:[EMAIL PROTECTED]
> Hello,Does any one i
SAP, SAP, what the heck is SAP? At first I thought it was SIP, but that
doesn't sound right. Maybe it's referring to the COMPANY SAP? If so, what
specific application are you talking about?
I must say SAP's website is a nightmare. Looks like all marketing speak to
me. Bunch of mumbo jumbo and
If you are subscribed to this list via e-mail, we will be transitioning to a
new server with new software. Within the next few hours you will receive a
welcome message from the new server.Please save this e-mail as it
contains your password and subscription instructions.
If you never receive
I still don't know what you mean by "? is coming on that box" Do you mean
for the OSM module? That's not listed in the supported devices for Campus
Manager (which I'm assuming you mean by the "topology view."
You might try asking at [EMAIL PROTECTED] They have many more
CiscoWorks people over t
Try an access-list that denies ICMP and then use IP accounting access-
violations to see - more than likely a virus
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> Sent: Thursday, September 11, 2003 7:01 AM
> To: [EMAIL PROTECTED]
> Subject: Ethernet bogs down he
I need 10-20 people to beta test a new online cisco lab time rental
system. Anyone who would like free lab time and can answer a couple
questions after, please respond.
--
Jay Greenberg
CCIE #11021
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=75273&t=75273
---
Er, yes you can. Two people have already replied on how. Use a WILDCARD
mask of 0.0.0.254. Simple, easy, effective. I'd hate to have to type in
128 permit statements. Probably end up writing a Perl one-liner, but the
easier way is to use the proper WILDCARD mask.
Fred Reimer - CCNA
Eclipsys
Different approach:
Howmany clients? Static Nat on the router the other way around?
Give the server a route pointer to the nat router for the client.
You even can choose to give the client a global ip to connect to the server
with, like a mail server for example.
Martijn
-Oorspronkelijk
Hello people,
I am sitting the exam on next Monday (22nd September). Has anyone taken the
exam recently? I just want to know what the passing score is. Thank you.
Cheers,
Kenan
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and
Oops! I am moving the mailing list users to a new server and was testing
the new server. I inadvertently sent one of the test messages to the active
list. At 3:00 AM when stuff is not working, yelling "help" does not seem
like a bad idea :-).
By the way, the move should be done by this afternoo
Robert,
Yes.. You absolutley CAN... See previous reply...
Robert Perez wrote:
>
> You would have to do each host individually as:
>
> access-list 110 deny tcp host 192.168.2.2 host 192.168.1.254 eq
> 23
>
> You cannot choose only even addresses with any kind of command.
> Atleast not
> tha
Fred,
The "?" in the icon on the Topology map means it's an unknown device.
It knows it's CDP supported but it can not identify it's Cisco Device ID or
the sysObjectID. There are a couple of reasons for this including the fact
they are in reality HP JetDirects, New HP Servers (they both suppo
Well, we have two right answers (you can do it with a wildcard mask of
0.0.0.254) and two wrong answers (it's not possible). I'll break the tie
and say you can do it ;-)
Fred Reimer - CCNA
Eclipsys Corporation, 200 Ashford Center North, Atlanta, GA 30338
Phone: 404-847-5177 Cell: 770-490-3071
Do a sh ip nat trans. Are you seeing a quadrillion icmp translations
all sourcing a same host or few hosts?
Dave
Andrew Larkins wrote:
> Try an access-list that denies ICMP and then use IP accounting access-
> violations to see - more than likely a virus
>
>
>>-Original Message-
>
Counting me in and where do we go from here?
Thank you
Ollie
AT&T Common Backbone
866-397-7309 Opt 1
-Original Message-
From: Jay Greenberg [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 11, 2003 12:32 PM
To: [EMAIL PROTECTED]
Subject: Free Rack Time [7:75273]
I need 10-20 peopl
61 matches
Mail list logo