the
peerings, uptime of the BGP session and few more thing. By the moment I
think it should be done using snmpwalk, am I right?
FYI, I do have the full routing table in one of my routers (IOS 12.2.6)
Any help will be appreciated.
Thank
Alejandro Acosta
Message Posted at:
http
what software you are using, or if this products is
just a headache and does not worth the time for implementing it.
I have used Netflow just for traffic analysis, never for accounting,
can I do this using netflow or there are other software/methods?
Thanks
Alejandro Acosta,-
Message Posted
support avalaible for this model (there is only 802.1q support). Don4t you
think there is probably an error?.
Which is the smallest router than can support ISL or 802.1q?
Thanks
Alejandro Acosta
- Original Message -
From: Kae Hsu
To:
Sent: Saturday, November 02, 2002 3:39 AM
Subject
Hello,
Today I'll be installing DC3 card on my router. I wanted to restrict the
bandwidth only to 14 Mbps. How can I do that?, do I have to use rate-limit?
Thanks.
Alejandro Acosta
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=49177t=49177
Hello,
I just passed two weeks ago the CCNA exam, and now, I want to prepare for
CCNP. My question is: ISDN concepts are necessary for any of the CCNP
exams?.
Thanks
Alejandro Acosta
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=48647t=48647
Hello again,
Priscilla, you have said that an ethernet frame must be at least 64 bytes,
right?. I have just placed an sniffer on my LAN and I found over 3000 out of
15.000 packets. Does this mean that 20% of those packets are illegal?
Thanks
Alejandro Acosta
- Original Message -
From
.I found over 3000 out of 15.000 packets that were less than 64 bytes
longer..
- Original Message -
From: Alejandro Acosta Alamo
To: Priscilla Oppenheimer ;
Sent: Tuesday, July 09, 2002 2:10 PM
Subject: Re: Cut-through vs Store Forward [7:48316]
Hello again,
Priscilla, you
Hello,
I understand the differences between Cut-through and Store Forward. My
question is: How do you decide with method to use?, in whch situation have
you change the switching method?.
Thanks
Alejandro Acosta
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=48316t=48316
manually add one or two prepends
for AS 3 and the traffic goes ok, I am taking advantage of Link E
My question is: Is there any way that this can be done automaticly?, do I
have to use BGP communities?
Thanks in advanced, any approach is appreciated.
Alejandro Acosta
Message Posted at:
http
.
Thanks in advanced.
Alejandro Acosta
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=36366t=36366
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations
the above configuration I receive a round-trip time of 40 ms againts
the peers that I am connected to. However, when I remove the line no ip
route-cache distributed the round-trip time increses to 300ms!.
I have cleared the cef table but the behavior is the same.
Any ideas?
Thanks.
Alejandro Acosta
12.2(6) on 7507.
Any ideas?
Thanks.
Alejandro Acosta
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=35924t=35924
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
traffic in more difficult. I added many prepends (9)
in the publication of the second link but there still few traffic on it.
There is not IBGP between my two providers.
Any ideas?
Thks in advanced.
Alejandro Acosta
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=33433t
idea?
Alejandro Acosta
-Original Message-
From: Thomas Crowe
To: [EMAIL PROTECTED]
Sent: 28/01/02 12:45
Subject: RE: BGP and one backup link [7:33433]
Why not just use floating static routes? With only one active exit
point, I
don't see the reason for burdening your router
in advanced
Alejandro Acosta
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=30967t=30967
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
I forgot to say that when I try sh conf the CLI shows me:
myrouter#sh conf
%% Non-volatile configuration memory is not present
Thks again
Alejandro,-
-Original Message-
From: Alejandro Acosta
To: [EMAIL PROTECTED]
Sent: 4/01/02 2:49 PM
Subject: Nvram problem [7:30967]
Hi all
Hi All,
Why some you have said that ICMP packets should not be broadcasted?. I
mean, many people ping the broadcast address to know which hosts are
working. Right?, this kind of ping does not work on Windows systems, but in
Unix does.
Thks,
Alejandro
-Original Message-
From: Phil
Source route failed
3 13 Packet administratively prohibited
4 0 Source quench
11 x Time exceeded (generic category)
11 0 Time-to-live (TTL) exceeded
11 1 Fragment reassembly time exceeded
Priscilla
At 10:50 AM 12/26/01, Alejandro Acosta wrote
BGP I'll assume this is an Internet connection,
set up two default routes, ip cef global command and the configs you
have sent and you will have symetrical outgoing loadsharing.
Dave
Alejandro Acosta wrote:
Hi All,
This is my first message in the list.
I am running a BGP session
to me
you would be the customer as the dual connected seems more likely to be
upstream but I obviously don't have the big picture..
Dave
Alejandro Acosta wrote:
Hello,
Thanks for answering me.
I am using BGP because we have 2 Internet access and my customer
has 2
!
interface Serial2/4
description Link number 2
bandwidth 2048
ip address xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
no ip directed-broadcast
ip load-sharing per-packet
no ip mroute-cache
load-interval 30
no fair-queue
no cdp enable
Any ideas?
Thanks
Alejandro Acosta
P.D. I am using IOS 12.0(7)T
21 matches
Mail list logo
