Brute force for enable secret:
Too Many Secrets v0.7beta is a commandline tool to crack the enable
secret passwords on Cisco routers. You need the md5 password hash from
the config to run this tool. It contents dictionary and brute force
attacks and a nice feature to combine brute forcing with a p
I am a CCNA that has talked about getting the NP for almost two years
now. Well, my NA is about to expire and I have two months to crank out
four tests. I was talking with another slacker friend that mentioned a
6 month grace period if I have completed two of the four tests.
I am still planning
Shilpa,
I agree with Oliver...use RRD. Much more efficient. I'm not using
cricket...but cacti rocks:
http://www.raxnet.net/products/cacti/index.php
And for a complete list of tools:
http://people.ee.ethz.ch/~oetiker/webtools/rrdtool/rrdworld/index.html
Check out NTOP as well...good protocol
I've done it...it took both feeds fine (for a few minutes...didn't run
it too long), however does not act "redundant" The switch will loose
power going to DC.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Koen Zeilstra
Sent: Monday, October 07, 2002 3
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Persio Pucci
Sent: Monday, October 07, 2002 1:38 PM
To: [EMAIL PROTECTED]
Subject: Tech Tips [7:55015]
Hey folks,
where did the "Tech Tips" go that I cannot find it anywhere in the new
Cisco
site? Did anyb
Any know how to simulate a CMTS? I have a few uBR900's in a lab
environment, and would love to use the cable interface. Since I don't
know much about the cable infrastructure, I don't know if I can use the
interfaces without a CMTS (i.e. back to back cable interfaces)
Any suggestions? Thanks!
Hi all,
Just a quick question:
I have the following setup: (a)(b)---OSPF network
Router A (extreme L3 switch) is connected to router B, and router B is
running ospf to other cisco boxes. I have setup a static route that points
from A to B so machines can get to pc's in the ospf area. The st
t; > Failed to troubleshoot it.Anyone with ideas.
> > >
> > >
> > >
> > >
> > >
> > > =
> > > Thanks in advance for ur time and replies.
> > > Annu.
> > >
> > > __
Hi all,
I appreciate any feedback to my question:
I am setting up a lab environment and intially trying
to configure a router and a pix behind it.
my router's outside interface is connected to a cable
modem and have a live ip address assigned to it.
cable modempix> inside
hosts.
the
I saw this demoed @ InterOp last year...I had my doubts as well. I have
never had to tweak BGP to the point of doing it all the time...and that
was the sales pitch. Their box will do the work for you.
It was a sweet box...doesn't sit inline with traffic so wouldn't be a
single point of failure
I've been getting good prices from:
http://www.networkhardware.com/
hope this helps.
Tony
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42743&t=42209
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/lis
Ricky,
if you are overloading on an interface's ip address then your above
statement would be correct. assuming that you have an access list permitting
the range of the network. if you have a nat pool then a static statement
would suffice. such as ip nat inside source static private ip - public i
IP NAT INSIDE on the 10.0.0.x interface and IP NAT OUTSIDE on the
141.155.121.x interface.
Anthony Pace
""Ricky Chan"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> I can't connect to my internal web server from
everyone!
Anthony Pace
""Gaz"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> You didn't muddy them half as much as I did!
>
> I think mine ranks up with my most inaccurate post ever. Unfortunately, I
> answered with the junk that I had
on ALL platforms, ACLs are fast or CEF-switched by default.
Anthony Pace
""Marty Adkins"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Anthony Pace wrote:
> >
> > I thought on some platforms there was a way to cache the ACLs and or
mmand to raise the RTP
ceiling? The quieng question is a good one, because, allthough queing is
supposed to be applied to a phisical interface, you can apply quing in a
frame-relay class-map, and different maps can be applied to different
interfaces.
Anthony Pace
""Michael Williams&quo
om them. I
have seen alot of VPN companies sell the SAFENET client as their own.
Anthony Pace
""Craig Columbus"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Let me preface this by saying that all of my VPN experience has been
either
> peer-peer
initiateing a ping to a device behind ACL 102. Does that
sound correct?
Anthony Pace
""Gaz"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I don't think you will see the source as echo reply. By that, I mean that
> the echo reply will only be evide
for instance :
access-list 101 permit icmp any host 207.122.1.5 echo
access-list 101 permit icmp host 207.122.2.3 any echo-reply
but not
access-list 101 permit icmp any echo-reply any
Anthony Pace
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42590&
Also Virtual-Template?
Is there a good explanation of their different applications? Does the
Group-Async alow you to defing a template for analog calls landing on a PRI?
Anthony Pace
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42584&
084C2A6E195D3B7F can be written and another row above it with the HEX
numbers in order 0-F.
Anthony Pace
""Persio Pucci"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Is there any formula to transform a hexadec pair of number from canonical
t
I think the VL must be defined on both routers using each others RID not
just any arbitraray interface) In your case maybe the time it worked just
happened to be when you defined the link with the RID.
Anthony Pace
""Jeremy"" wrote in message
[EMAIL PROTECTED]">ne
I thought on some platforms there was a way to cache the ACLs and or policy
route-maps so they could be fast/CEF/mls switched. Like the logic got
copiled and pushed into silicon (or something like that). Is there any
vlaidity to that?
Anthony Pace
""Brunner Joseph"" w
IPX EIGRP and IP EIGRP are 2 different processes (it would seem) but the
floating static route would be :
ipx route default DDD.0004.dd82.0340 floating-static
Anthony Pace
""Logan, Harold"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Steve,
In 802.1q some devices send also send untagged frames on the trunk links and
these are considered to be associated with the "native" VLAN. The thread
below indicates anohter use of the "native" VLAN which is the VLAN used for
VTP. How can you change it form VLAN 1 on a CISCO d
I think 0.0.0.0 0.0.0.0 is default and 0.0.0.0 255.255.255.255 is "ANY"
which some IOS's will replace with the actual word "ANY"
Anthony Pace
""Ruihai An"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Group,
>
> I
packet, or for fragmentaion of large data packets)
Does that sound reasonable for the "dual" syntaxes??
Anthony Pace
""Richard Botham"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Anthony,
> I think (?) that ppp multilink load threshol
How can you tell a switch or router to treat untagged frames as any other
VLAN other thatn VLAN1 which is the default? Is it a VTP command on the
switch? How about routers ? How about 2924 siwtches?
Anthony Pace
""Jeffrey Reed"" wrote in message
[EMAIL PROTECTED]&qu
What is the difference between PPP MULTILINK LOAD THRIESHOLD and DILAERR
LOAD-THRESHOLD ???
Anthony Pace
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41783&t=41783
--
FAQ, list archives, and subscription in
Did you enable CLNS routing? You need to turn this on before you can
configure ISIS.
Anthony Pace
""nntp.groupstudy.com"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi, Group,
>
> I am trying to configure IS-IS at CCIE lab, and two of
/24 as many providers will not propogate this via BGP.
Anthony Pace
""Kim Seng"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> My network has an Internet Border router. The router
> has two ISPs connection: UUNET(T3) and SPRINT(T1). We
> have
quot; in the destination of an
extended ACL is a weird sort of "shorthand" meaning "only this aggrigate and
not routes which are more spcecific".
Does anyone know the meaning of 10.0.0.0 0.255.255.255 0.0.0.0 0.0.0.0 ?
Anthony Pace
""Hunt Lee"" wr
A. will catch any routes which have ever traversed AS-10
B. will catch only routes which have originated in 10 and have just come
into your AS from AS-10 (meaning you would be directly connected to AS-10.
Does anyone else interperete B differently than this??
Anthony Pace
""Steven
The router will "bridge" all traffic on those interfaces EXCEPT IP. If you
want to bridge IP you disable IP routing or use CRB or IRB which lets you
configure your choice of bridge/route per protocol per interface (in the
case of IRB you route into the bridge group via the BVI.
An
I got a message saying it was not a valid value. Is that because I tried to
just do one zero (my thinking being it would then give me the valid options
for holdtime)
I tried
ROUTER BGP 100
neighbor 1.1.1.1 timers 0 ?
Anthony Pace
""Chris Camplejohn"" wrote in message
[EM
CCO say's if the holdtime is "0" then the sessions are assumed up and do not
exchange keepalives, but on the command line "timers" does not permit 0 for
the hello or hlodrime interval.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=40657&t=40657
--
Wow
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=39757&t=39437
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
The default settings in HT PE should work unless the BAUD speed settings
changed on the router. Check your speed settings first... if that doesn't
work, check the stop bits... flow control etc.
I can't help you on the 2501... sorry.
Message Posted at:
http://www.groupstudy.com/form/read.php?f
Congrats!... I just started my CCNP by sitting the Switching Beta. Hope
to be fast on your heels.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=39610&t=39583
--
FAQ, list archives, and subscription info: http://www.groupstudy.
Hi all,
could someone please enlighten me on this:
what is the best or appropriate way to determine the
seed metric in a redistributed environment?
for example, if you are redistributing eigrp into ospf
or vice versa. Does the administrative distance of the
protocol being distributed come into
and
should run with very high bandwidth utilization. Appreciate if anyone can
consult me on this, thanks in advance.
Anthony.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=38423&t=38423
--
FAQ, list archives, and subscript
Hi All,
I was wondering if I could get some advice on the type
of Cisco switch to purchase for the BCMSN, CCNP
course. Looking over the book, it seems like there is
much emphasis on Layer 2 functionalities. I am using
the Cisco Press book by Krean Webb and the case
studies deal much with the "Set
Hi All,
I am studying to take the BSCN exam for CCNP track and
I have two questions, one about building a frame-relay
lab/switch and the other about serial connections.
I have three routers a cisco 1605 and two cisco 1720s
they each have two WIC cards with integrated
cscu/dsu. the 1605 has the s
if you have layer 3 connectivity, as you mentioned,
you can ping ip addresses on the internet, then you
might want to check DNS problems or misconfigurations.
Tony
__
Do You Yahoo!?
Try FREE Yahoo! Mail - the world's greatest free email!
http://m
Hi, take a look at the protocol IGRP in the Cisco website. Maybe you can
have a better understanding of what an Autonomous system number is all about.
Anthony.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=36175&t=36067
--
I thks to all who come to advise, really appreciate.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=35662&t=35389
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondis
You see Eric, because I have an ISDN line as backup, that's why I need both
routers to see the PVC as down for any failure that happen on either side.
In that case, both routers can then activate the ISDN from either side and
use the backup route properly.
Now, with router B not able to see the fr
routers
are configured as subinterface, router B can then update router A's
interface as down and the whole PVC goes down. What is concept behind ? Why
doesn't the keepalive update both side properly ?
Anthony.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i
The placement of the ISDN line is not correct due to the aligment. Sorry for
that.
Anthony.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=31347&t=31346
--
FAQ, list archives, and subscription info: http://www.groups
___|
My problem is : When the client PC download file from the server PC, the
transmitting speed is very slow (about 15KB/sec). The transmit starts with a
speed of about 70KB/sec and then slowly drops to 15KB/sec. Appreciate for
any suggestion(s).
Anthony.
Message Posted at:
http
As far as I come to know, yes. Hope you good luck.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=30794&t=30742
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondiscl
I did MPLS while it was in beta, I found MPLS and VPN Architectures by
Pepelnjak and Guichard very useful (ISBN 1-58705-002-1). Also, Boson have an
MPLS practice test available. It won't give you the exact exam questions but
topics are covered well, also it has references to the above book.
Good l
Does anyone know any websites that have good & simple
introduction/explaination on Frame Relay network ? Pls direct me.
What does it mean by "Frame Relay is a layer 2 protocol (Data link layer)"
and "Frame Relay works on the layer 2 of the OSI model" ?
Appreciate for any enlightenment.
Message
Desperately seeking this IOS (or any other newer IOS for 2610 that supports
WIC-1ADSL) to enable my new WIC-1ADSL for my 2610. Please help, I will
return the favor. [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28486&t=28486
---
Hi, thks for your reply.
But I have problem getting the SMARTnet program activate.
My product documentation cd don't work properly.
Wonder if you can help me get the IOS and send it to me ?
Anthony.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2834
Appreciate if anyone could show me where can I find & download the Cisco IOS
12.1(7) or higher release version.
I need it urgently for the use of configuring Dialer Watch feature.
I am using Cisco 2620 router.
Thks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28241&t=28241
I thks to all of you for showing a helping hand.
Really appreciate.
Regrds.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27959&t=27288
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Repor
Is there any router simulation software that I can configure to run in a
Frame Relay and ISDN network ?
Appreciate if anyone who knows can send me one.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27658&t=27658
--
FAQ, list arch
Hi, is this Slimline 2 ISDN simulator a software ?
If it is, can you send one copy to me ?
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27657&t=27365
--
FAQ, list archives, and subscription info: http://www.gr
Joshua, I would like to take a look at your router config at both ends.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27413&t=27386
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
show your config out
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27302&t=24332
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PRO
I have add in the ppp authenication chap command at both physical and
logical interfaces.
This is my output of debug q931 commnad :
The message "Message not compatible" seems to be the problem, can anyone
highlight me what does it mean ?
01:00:52: ISDN BR0/0: RX on B1
at 64 Kb/
01:00:22550488
Hi,I am trying to configure two 2600 series routers to run in a Frame Relay
network with an ISDN dial line as backup operation.
The Frame Relay configuration is working alright but the ISDN is not.
With reference to the figure below :
R1---S1Frame RelayS0---R2
\---Bri0-ISDN--Bri
Hi, I can sent you a copy of it.
Just let me know your emaill address.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27287&t=26886
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report m
ustrating because I can't diagnose the
>problem
>from the router. (next step: sniff the network)
>
>Has anyone seen this kind of behavior before?
>
>If so, what was the solution?
>
>If not, what's your best guess at what the problem could be?
>
>thanks in adv
What is the cheapest emulator that one can buy?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12570&t=12563
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosu
Is there any way to incorporate ISDN into my lab without spending $1800 on
an emulator? Are there any ISDN crossover cables? I don't a lot of money
to spend on emulators and simulators. Any advice is greatly appreciated.
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i
Can I use a TACAC+ server to restrict access between two networks? I have a
corporate network and a development network separated by a router. Each
network is off of an ethernet interface on the router. I want to restrict
access between these two networks, not based on IP addresses but based on
Anyone know what kind of cable to use to connect two T1 modules? I have a
2525 with the Fractional/full T1 module(RJ45) and a 2621 with the
WIC-1DSU-T1 module(RJ45). What kind of cable can I use to connect these
momdules?
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i
I have a Cisco 2525 router. Since it has token ring, which IOS would I need
to get for it?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10425&t=10425
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/
Anyone got any good reference or know where to get documentation on
configuring TACACS+, AAA, and Cisco ACS server
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10211&t=10211
--
FAQ, list archives, and subscription info: http://w
Anyone got any good reference or know where to get documentation on
configuring TACACS+, AAA, and Cisco ACS server
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10208&t=10208
--
FAQ, list archives, and subscription info: http://w
Anyone got any good reference or know where to get documentation on
configuring TACACS+, AAA, and Cisco ACS server
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10210&t=10210
--
FAQ, list archives, and subscription info: http://w
Anyone got any good reference or know where to get documentation on
configuring TACACS+, AAA, and Cisco ACS server
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10209&t=10209
--
FAQ, list archives, and subscription info: http://w
I totally see what you are saying. I am somewhat in the same boat as I just
recieved the CCNP. There is no substitute for experience. NONE! As long
as you know that then you will be OK. Just because I have my CCNP doesn't
mean much to me. My was asking me "why don't you seem happy about it?
Let me know what you find out. I have only one switch but 2 2621's, a 2610,
a 2524, and a 1601.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9108&t=9092
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/li
Hi. I have tried doing a similar thing but as soon as you configure:
aaa new-model
you are them almost stuck with using usernames and p/w for any form of
access, this includes vty and console. You may need to check the Cisco
Connection Online (CCO) to find out more.
Hope this helps.
Message P
There are two chips on the systmem which are right next to each other and
right next to the fan on a 2600 series router. I though that they were the
BOOT ROM. I was later told that the boot ROM is only one chip.
To make a long story short I have a router that is not working. One of
those chips
In order to incorporate Token Ring into my lab what would I need? I have
two routers with Token Ring interfaces right now. What do I need to get
them going? Token Ring Switch? Mau? What types of cables are necessary?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8547&t=854
Anyone got any advice on equipment that should go into CCIE lab. What has
worked for you. I know that the Cisco web site has the lab equipment list
but what I want to know is LITERALLY what equipment do you have in your lab
or do you know of that has worked for others. Thanks. . this site is aw
Yes. . Did you get the NM-16A module? You just need that module and the
octal cables and you are good to go with a few configurations. I use a 2621
myelf
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7457&t=7451
--
FAQ, list a
Does anyone know where to find out how many CCIE's threre and what number is
the last CCIE issued?
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7456&t=7456
--
FAQ, list archives, and subscription info: http://www.groupst
I just passed the BCRAN yesterday to complete the CCNP! I thought that the
order from hardest to easiest was
ACRC
BCRAN
CIT
BCMSN
What is next for you? I am trying to figure out what to do next and where
to get started on the road to CCIE. Any ideas?
Message Posted at:
http://www.groupstudy
I just passed CCNP yesterday. Does anyone have any ideas as to where I
should start on the path to CCIE? Should I do CCDP next?
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7259&t=7259
--
FAQ, list archives, and subscr
I only need to extend about 10 feet. Is that one of the cables that has a
black ends with 8 RJ45 ports on each end?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7013&t=6987
--
FAQ, list archives, and subscription info: http://w
It is a pain! I don't think that you need to know much about the commands
as much as you need to know about those stupid profiles. When are you
planning on taking it? If I take if before you I will let you know how it
goes if you give me your e-mail
Message Posted at:
http://www.groupstudy.co
What kind of cable and adapter do I need to extend the octal cable that I am
using for reverse telnet? I am not sure what the name of the cable is.
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6987&t=6987
--
FAQ, list a
I am taking the BCRAN in a couple of days. Does anyone have any advice?
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6988&t=6988
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Re
What line of work on you in and what type of hands on did you get? do you
have a lab at home? I have one exam left for ccnp. How long was it in
between when you finished CCNP and took CCIE written. How much more is
there to know than is covered in all of CCNP?
Thanks
""Bryan in Richmond"" w
Has anyone experience any problems with their PIX to PIX vpn? It seems that
mine tends to go down much more often than I like, forcing me to clear the
IPSEC and ISAKMP SA's.
Any ideas or suggestions?
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5920&t=5920
I am trying to set up reverse telnet. Doesn't seem to be working. what are
the steps involved?
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5644&t=5644
--
FAQ, list archives, and subscription info: http://www.groupst
I am taking the BCRAN pretty soon. Does anyone know how to get an ISDN
simulator? Either software or hardware. I would like to get my hands on
something like that.
Thanks a lot
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5643&t=5643
I am taking it also. Where did you get the isdn router sim?
""Boywonder"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Thanks Pat.
>
> Anyone else got any good info?
>
>
> ""Patrick Donlon"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > I passed the Remo
I bought the nm-16a module for my 2621 router. It is the 16 port async
module. The router is not auto-detecting it like it usually does with other
modules. Am I missing something here?
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5640&t=5640
-
I am looking for some advice on where to go with a config I am working on.
This config is lab number 8 in the "All-in-one CCIE Lab study guide".
I am setting up snapshot routing between two routers that use ISDN BRIs to
connect. One router is setup as the client using the
snapshot client 5 8 di
and god, but you should really use
> soft-reconfig so you can mess with you policies live, but this means that
> the routes still fill up the table, even if they are not actually entered
> into the forwarding table.
>
> hth
>
> Andy
>
> - Original Message -
> From
I have been in the field now for about 4 years. I worked my way up from the
bottom as a desktop support tech and for the last year and a half been
working with cisco equipment and alteon equipment in a small environment. I
have set up a web site, VRRP, HSRP, BGP multihoming, VLANs, VPNs, and PIX
Does anyone know any good tools that I could use to get a network baseline?
I need to get one and not sure what tools and guidlines to use.
Thanks in advance for your help
Anthony
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4417&am
I have two 2621's, each with 64MB of memory. I am setting up a BGP
multihoming config with two ISP's. Anyone know approximately how many
routes I can accept with that much memory?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4305&t=4305
---
Can anyone give me the steps in Multihoming with 2 ISP's. I have already
obtained an ASN and both of my ISPs have agreed to announce my space as long
as it is a /24 or lower. Since I registered the ASN with ARIN, my ISP has
given me a different block of addresses that would satisfy the /24
requi
1 - 100 of 173 matches
Mail list logo