WFQ on Fast Ethernet

The default queueing strategy on Fast Ethernet is FIFO. If I change it to WFQ because I need to run IP precedence, is there any problem ? regards Ibrahim Davnet Singapore Pte Ltd 8 Temasek Boulevard #17-01 Suntec Tower 3 Singapore 038988. Tel: (65)8200 ext 410 Fax: 8200882 HP: 96490720

1 Mbps ATM PVC running BGP

ough the MTU on the ATM interface is 4470 bytes. regards Ibrahim _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Re: 1 Mbps ATM PVC running BGP

ed by itself and then go up again for only 3 minutes. Ibam - Original Message -=20 From: Morin, Patrick=20 To: 'Ibrahim'=20 Sent: Saturday, March 17, 2001 2:24 AM Subject: RE: 1 Mbps ATM PVC running BGP For the PINGs , maybe your ISP is not using a MTU of 4470... Some

cisco & muscles

If we see on Ciscopress book cover, there are always man with big muscles & strong. I'm working on CCIE .. and muscles :-) Anyone here have CCIE plus big muscles ? Ibam ccnp+voice2.0 Disclaimer: Please note that this correspondence is for the name

RE: cisco & muscles

to a rack with the other while trying not to drop the screws or the > screwdriver > > :>) > > Dave H > > -Original Message- > From: netlinesys [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, January 09, 2001 9:07 AM > To: [EMAIL PROTECTED] > Subject: Re: c

CSCO in nasdaq

Hi, If we see the CSCO chart in http://quote.yahoo.com/q?s=CSCO&d=t ... looks like it will remain be down. It's a bad news for us ?? regards, Ibrahim Disclaimer: Please note that this correspondence is for the named person's us

ipsec isakmp problem

Hi group, We installed tunnel & ipsec (using GRE, isakmp-preshare, cisco 3640 & IOS 12.0.7XK1) between 2 routers. Then tunnel & ipsec can work, but the problem is after the session expired, the ipsec can't establish anymore, and we've to run this command "clear crypto sa" manually on both rou

RE: BCMSN and the Boson Test

Hi Jason, The Boson test isn't good for BCMSN, too far from the real test. The good resources is Cisco online test, and BCMSN book from Cisco Press, I passed with these resources. regards, Ibrahim Davnet Singapore > -Original Message- > From: Jason Baker [mailto:[EMAI

RE: BCMSN and the Boson Test

Sorry, I thought every body know about it. http://www.cisco.com/pcgi-bin/colt/ColtLogin.pl?MODULEID=2467&SUBMIT=Take+Te cheers, Ibrahim > > Ibrahim, > Would u plz tell me the URL of the Cisco Online tests??? Moreover on this > list, some people are sayign boson tests are g

Single area with large number networks.

in the link- state table The frequent routing table recalculation is true, but what about the other one ? thanks, Ibrahim Disclaimer: Please note that this correspondence is for the named person's use only and may contain information th

Single area with large number networks.

in the link- state table The frequent routing table recalculation is true, but what about the other one ? thanks, Ibrahim Disclaimer: Please note that this correspondence is for the named person's use only and may contain information th

RE: Single area with large number networks.

doesn't help. I tried before. I also opened the CCIE : TCP/IP routing book, ACRC book .. but can't found the answer. Ibam > > Try this > http://www.cisco.com/public/pubsearch.html > > - Original Message - > From: "Ibrahim" <[EMAIL PROTECTED]&g

RE: Single area with large number networks.

if you said refer to www.cisco.com, why everybody still need this mailing-list ? why there are many questions in this group ? Or better just simple make auto replay answer in this group "go to cisco website, you'll find the answer". :-) Ibrahim > There are far better m

RE: Single area with large number networks.

thanks for your response. But if some router down, the nearest one will send message to DR & BDR, and DR will send multicast message (it won't be excessive) to its networks. thanks, Ibrahim > > IMHO, B is the best answer as link failures in the area will cause > recalcul

VoIP & Discontinous IP address

  Hi,   We setup small VoIP gateway using Cisco 1750 & FXO Card. Here is the diagram :      Cisco 1750  A (WAN Interface using Public IP) -- LAN (Public IP)     |     |      Internet     |     | Cisco 1750 B (WAN Interface using Private IP)

RE: I passed CCNP voice. Can someone give me advise for CCNP secure exam?

What's the URL ? Ibam > CCNP Voice special is easy. > All in it are in cisco's training book. > The online test on cisco web site is very important for this exam. > > CCNP+Voice/CCDP/MCSE > > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/

Radius authentication on 2924XL

Hi, Any one implement radius authentication on Cisco cat 2924XL ? I can't find "radius-server host" command in configuration mode. I added "aaa new-model" and "aaa authentication login VTY group radius local". My IOS version is 12.0(5.1)XP. thanks, Ibam ___

RE: dns

yup ... try this one http://www.3dns.com/ I heard Microsoft using that product. Ibam > that's if you use "bind" , other nameservers will react differently. > > Carlos > > -Original Message- > From: Leonard Ong <[EMAIL PROTECTED]> > To: Nurarif Wibawa <[EMAIL PROTECTED]>; [EMAIL PROTE

CVOICE 2.0 Beta passed

Hi .. I passed it, I thought I'll get failed, because so many questions on Voice over frame-relay .. Ibam Cvoice,Cvoice 2.0 **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associate-Announcement.html _ UPDATE

RE: CVOICE 2.0 Beta passed

Cisco VoIP Fundamental book, and VoFR documentation from Cisco is very usefull. Don't forget to read IP Telephony products. regards, Ibam > > Ibam, > do you have any good resource for the CVOICE exam ? I am > looking for the > CVOICE 2.0 notes. > > > rgd

RE: Is CVOICE1.0(1998) enough for CVOICE 2.0 Beta?

Last time you said (If I'm not wrong) there will be Call Manager (AVVID) topic in the next CVOICE certification. It's true ? Ibam > One main feature of CVOICE 2.0 is that they removed the first two > chapters > on analog and digital voice technologies to make more time for hands-on > labs. S

ISDN mulitiline aggregation! is that possible??

, How I can do the aggregation process?? Any advice will be appreciated. Regards, Magdy H. Ibrahim MCSE, CCNA System Administrator Purenet Internetworking _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and

Re: ISDN mulitiline aggregation! is that possible??

when it raises RTS instead of DTR but I'm not sure > about either... > > -Original Message- > From: Stull, Cory [mailto:[EMAIL PROTECTED]] > Sent: Thursday, January 25, 2001 1:26 PM > To: 'Magdy Ibrahim' > Cc: '[EMAIL PROTECTED]' > Subject: RE

Re: CCNP Preparation or Certification Library ???

Hi Arthur, That mean if I want to start preparing myself for CCNP which one is better to get full understanding the CCNP more than the other one? the Cisco CCNP Preparation Library??? OR the Cisco CCNP Certification Library??? Regards, Magdy MCSE, CCNA ""Arthur Simplina"" <[EMAIL PROTECTED]> w

Books.PDF for public!

materials for all CISCO exams such as CCNA, CCDA, CCNP, CCDP ..etc. any Advise and help will be appreciated. Awaiting for your reply. Regards Magdy H. Ibrahim CCNA, MCSE System Administrator _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list

Re: Kindly Request

Hey Man, I meant you Deepak, there was nothing make you laugh so much. This guy did not ask you to give him some money and I think he is not ask for that. all what he want a leader to help him in this way. So if you do not want to help him. At least stay away and don't laugh such way. Magdy MCSE,

IOS Compression [7:66004]

dear Pro, I have a router 1601 with 4 MB flash and 8 MB dram , does it work to install IOS version 12.2 (3) required 12 MB flash ? And how can i do it through TFTP ? Would anyone gives me the access for the IOS images in CIsco sites, Please ! Thanks, waiting for your reply. Message Post

Voice chat behind PIX firewall, How to?? [7:69656]

Hi all, I protected my system by using PIX 515 and all my system and Network behind that PIX, I am trying to configure my PIX to allow the voice chat to allow my internal users to talk with external people using MSN and Yahoo messenger Voice chat service... Actually I failed to get it up Can an

subscribe cisco [7:48635]

- Do You Yahoo!? New! SBC Yahoo! Dial - 1st Month Free & unlimited access Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=48635&t=48635 -- FAQ, list archives, and subscription info: http://www.grou

running Realserver behind PIX to server realplayer [7:48998]

Hi all, I have internal LAN behind my PIX firewall with 6.0(1)... My realserver8.0 installed in the internal LAN . I need to allow the outside users using real player to access and run videos and movies... My PIX conf.as the following: fixup protocol ftp 21 fixup protocol http 80 fixup protocol

How to allow outside user to browse the inside web [7:49648]

Hi all, I have PIX firewall with 6.0(1) and I am running my mail server behind it and it works find till now... these days I need to run a web server "apatche" behind it.. I tried to configure it to allow the oursiders to access the inside web bage by usning the following commands: static (insid

CCNP and CCSP Lab design and Topology [7:74388]

Hi All, I am wondering If I can find any help here regarding this case but I am trying as I knew that most of the list members are involved in Networking and communications Ok, Now I am trying to build CCNP LAB here for studying purposes in Cairo University, Egypt.. This lab will use for CCNP T

CCNP Lab design and Topology [7:74389]

Hi All, I am wondering If I can find any help here regarding this case but I am trying as I knew that most of the list members are involved in Networking and communications Ok, Now I am trying to build CCNP LAB here for studying purposes in Cairo University, Egypt.. This lab will use for CCNP T

Urgent .... ISDN Help

Dear all, Please Help me.. I have a big problem related with ISDN. I have 2600 router with 8 bri ports, right, and I want to install two bri ports with to PC dialup connection ove ISDN ofcourse. the first customer is already connected. I tried to connect the second customer by using the same confi

Two ISDN Sources connected to my router with one BRI port

Hi All, With a single BRI port on a Cisco router, can I have separate ISDN sources accessing the router simultaneously? Can any one tell me how to use of dialer profiles. and how to configure one dialer interface per customer, and link them to the BRI. Please I need your help ___

PIX firewall and outside ACS2.6!!! [7:39]

Dear All, I have a simple question about PIX authentication. I am trying to configure my PIX506 with IOS5.1 to use cisco secure ACS2.6 to authenticate my internal users when they try to access the internet.. The ACS located on the outside network with real IP. When I try to access the internet the

PIX autentication ISSUE!!!! [7:705]

Dear All, I hope to find an expert in PIX firewall to help me to solve this problem: About PIX authentication With ACS2.3. I am trying to configure my PIX506 with IOS5.1 to use cisco secure ACS2.3 to authenticate my internal users when they try to access the internet.. The ACS located on the insid

Dialup behind PIX and Telephony services!!!! [7:2539]

Dear All, I installed my PIX firewall and configured my Dialup users to work behind it ofcourse using private IPs for the dialup and the PIX do NAT to access the internet.. Many clients complain that they could not use the telephony services such as MSN calling services and others... Is this prob

Is it possible, ATM single mode fiber IR to LR connection? [7:38593]

I am trying to connect my Cisco Router Cisco 3661 Router with ATM Interface Single mode Intermediate REACH to ISP router 7513 with ATM Interface Single mode LONG REACH via direct Fiber cable between the two sites ( Distance 1.5 Km ) Is this possible ? OR Should I have the two router with the sam

ACS2.6 users on Cluster Servers!! [7:13481]

Hi guys, I installed ACS2.6 on 2 nodes cluster , using Win2k to provide high availability , so when any ACS service stop on one node the ACS will failover to the other node . The problem I'm facing is that the ACS configuration replicated well when ACS moves from one node to the other , but the u

question on ipunumbered [7:13846]

Why when using unnumbered interfaces, any routing protocol running across the serial line must not advertise subnet information ? Thanks in advance _ For Rs. 2,000,000 worth of Aptech scholarships click below http://events.rediff.com/aptech

classless routing [7:13847]

Can you please explain what would happen and why. A router has ip classless enabled. It's routing table has entries for 10.5.0.0/16 and 10.6.0.0/16 and a default route 0.0.0.0. A packet arrives for a destination on 10.7.0.0/16. Which route does it take ? thanks in advance _

Infinity question!! [7:14138]

Hi, in a distance vector protocol, " counting to infinity"? A. calculates the time taken for a protocol to converge B. checks to make sure the number of route entries donot exceed a set upper limit. C. counts the packet dropped during a routing loop. D. sets upper limit for hop count , so th

Network topology, [7:14139]

Hi all, Is the Network topology related to the physical layer or the Data link layer? Thanks for your response. suleman aboo _ For Rs. 2,000,000 worth of Aptech scholarships click below http://events.rediff.com/aptechsch/scholarship.htm

Re: CAR configuration [7:14461]

Hi Rock, It's recommended to configure CAR at your provider's router. If you're an ISP it's helpful to control any traffice through every serial interface you assign to any of your clients.. I think it's useless to configure it on your router if you are not bandwidth provider: What you'll control

PIX failover!! [7:15848]

Dear All, Sorry for the stupid question but I want to confirm it. I have to configure my PIX 515UR bundle... How can I know the primary unit from the secondary unit?? Is that from the failover cable only OR there is an other thing marked the unit as primary or secondary??? Please advice me soon,

blocking PORTS ON PIX!!! [7:16275]

Dear All, I have a question about how to block ports on PIX firewall: my case is: I have mail server working behind PIX so I opened POP3 and SMTP ports for this mail server. my mail server accessed from inside and outside interfaces. I want to limit my internal IP only to work with POP3 "using ou

Re: blocking PORTS ON PIX!!! [7:16275]

ope that helps. > > Allen > > - Original Message - > From: "Magdy H. Ibrahim" > To: > Sent: Thursday, August 16, 2001 7:46 AM > Subject: blocking PORTS ON PIX!!! [7:16275] > > > > Dear All, > > > > I have a question about how to block

BGP question [7:16961]

Hi, Can someone please explain to me about BGP Synchronisation. Why does the rule apply that states "do not use or advertise a route learned by IBGP to an external neighbour until its in the IGP table ". Why would this cause a problem. I am not sure I understand the implications. regards sulema

IOS PROBLEM!! [7:26978]

Hi All, just a quick question, I have a small cisco 800 series at home, with 4 port hub and a BRI, I've just started to go through the config exercises in the books and one question has cropped up from last night. When I try and enable IGRP, 'router(config)#router igrp 20' it tells me this is an

Content engine question! [7:43101]

Dear All, I am studying this days on How to configure and implement Cisco Content Engine590 on my network... When I browsed Cisco online Guide I found the following regarding Router configuration for HTTP traffice and WCCP version2. I found the following: "The router or switch must be running a v

EIGRP NBMA and multicast together.. [7:44603]

Hi, Can anyone please help me on this- Its about EIGRP NBMA and multicast together.. EIGRP uses 224.0.0.10 for its hello packets. In an NBMA environment such as Frame Relay how does this work ? Does each FR interface need FR Multicasting enabled (I know of the BROADCAST cli option but not a

Quick MSAU question [7:18388]

Hi all, On Token ring, is it 12 or 33 MSAU per ring & how many nodes? Many thanks suleman Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18388&t=18388 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/lis

Re: TIME TO STOP RE: 'It's not the US they want to destroy. [7:20111]

Hi Paul and All, I think we have to stop this thread before we convert this List to an other thing not related to our feild.. By the way Karl, I disagree with all attackers and there actions especially the Tuesday Attacks... As muslim man I realised that you have not any knowledge about what you

OT: ARMAGEDON R: TIME TO STOP RE: 'It's not the US they want to [7:20243]

Hey, I thin that we Have to start thinking with proffesional way to find out the real attackers as the following: Have we all forgotten the Benjamin Franklin's prophecy that he had made at the Philadelphia Constitutional Convention of 1787 in which he had pleaded that "If you do not exclude them

Re: ARMAGEDON R: TIME TO STOP RE: 'It's not the US they want to [7:20248]

Hey take a look on these two articles and tell me your opinion. Have we all forgotten the Benjamin Franklin's prophecy that he had made at the Philadelphia Constitutional Convention of 1787 in which he had pleaded that "If you do not exclude them from these United States, in this constitution

Re: Telnet on PIX outside interface [7:20271]

exactly the command mail me again and I'll be pleased to help.. Bytheway there is no way to telnet on the outside interface... Magdy H. Ibrahim ""NRB"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Guys/Gurus, > > Can anyone please help

Re: Telnet on PIX outside interface [7:20271]

tion to telnet to the > outside interface of the pix. > > Watch the wrap. > > http://www.cisco.com/warp/public/110/pptppix.html > > > > -Original Message- > From: Magdy H. Ibrahim [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, September 18, 2001 10:38

Quick TFTP question [7:21139]

I would like to know about the tftp server for back ups- how does the router know the location on the machine used for the storages of images. I know you give the address- ie domain name or IP address but what about the directory? Thanks in advance suleman Message Posted at: http://www.group

How to make sure that the CE590 are working properly?? [7:56591]

Hi all, I just installed my first CE590 and configured it and connected it to my system... Actually I do not feel a major different changes when I start using it... My question is: - How to make sure that my CE do caching and provide me a good service better than before? - And how to test it to fe

Caller ID Conf. How to?? [7:57768]

Hi all, I want your help to run the Caller ID feature on my Cisco 3661 access router.. Do I need to specific version of IOS?? I am running ACS2.6 as my authentication sever, and this ACS able to view the caller id.. the exchange already ran the Caller Id feature on my Dialed number which my clients

Cisco CE590 issue! [7:59714]

Hi all, I really looking for someone who can help me in this issue, I have a client I installed cisco ce590 on his site and the CE590 works properly saving rate is about 39%. When I checked its contents by requesting a homepage when the CE connected to the internet and I disconnect my main router a

running Realserver behind PIX to server realplayer in the [7:48909]

Hi all, I have internal LAN behind my PIX firewall with 6.0(1)... My realserver8.0 installed in the internal LAN . I need to allow the outside users using real player to access and run videos and movies... My PIX conf.as the following: fixup protocol ftp 21 fixup protocol http 80 fixup protocol

Re: ACS & PIX [7:50589]

need for more info Magdy ""Mohannad Khuffash"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Dear all, > > Why not the usage time in the user property not increased when I pass > through the PIX which get Authentication & Authorization and send accounting > to ACS? Not like t

CCNP new version!!! [7:50623]

Dear All, I just want to get more info about what is new in CCNP Version3 and Is there any new materials for thsi version?? Please advise me Best regards,,, Magdy Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50623&t=50623

ACS2.6 on w2k server with bugs!!! [7:50624]

Hi all, I have ACS2.6 server runs on W2k server used to authenticate my dialup users when they connect to the internet.. few days ago, it started a strange behaves which are: 1- When I tried to modify or editing an existing user to make some changes on his privileges. when I clicked on that user i

Re: ICQ and blocking the thing-PIX [7:52285]

Hi Farhan, Welcome back Farhan;-) That is a good Idea, I tried it with some services and it works fine... But, what if he does not have DNS server?? I mean if his DNS at his ISP Location??? Best regards,, Magdy ""FAhmed"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > You can

AGAIN... aCS2.6 on W2k advanced server with bug!!!! [7:52527]

Dear All, This is my second post regarding ACS2.6 bugs... The problem is: As you know;-) I have an acs2.6 server on W2k advanced server , My users Using it to connect to the internet and sometimes many of my users logged into my network through the acs and when they disconnected from my system, I

Re: AGAIN... aCS2.6 on W2k advanced server with bug!!!! [7:52530]

behave?? and how to fix this strange behave?? Thanx Magdy ""Patrick Donlon"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I have a similar set-up, ACS on Win2k, what do error message do you see in > the event log? > > > ""Ma

Re: AGAIN... aCS2.6 on W2k advanced server with bug!!!! [7:52534]

then failed attempts), if they have a > > successful authentication then it's somewhere else like you NT > > authentication. > > > > > > ""Magdy H. Ibrahim"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > >

Re: which exam to appear after routing 640-603 [7:52770]

Congratulations... how did you find it?? And what materials you studied to prepare to this exam. Thanx Magdy wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > hi, > i need to know which exam would be more appropreate to appear for after > the routing exam towards the ccn

How to make real player from outside to contact real server [7:53542]

Hi All, I have a client wants to create Real server behind Pix firewall and I am trying to make the outside real player to contact the inside server but I failed.. Is there any extra commands more than the following commands on the PIX to allow the ourside clients to communicate with the inside s