QoS - match MPLS Exp [7:66311]

I'm testing QoS over a MPLS network on a lab. I reset QoS on the CE (R1) inbound LAN interface, set the DSCP bit outbound to the WAN to af11. On the PE (R5) router inbound I match the DSCP bit af11 and set the MPLS Exp bit to 1, and get match as below. The I have a outbound policy on the PE (R5)

Modem dial-up speed problem? PLEASE [7:49679]

Hi All, I have a problem with a 3600 with a nm-8am (8port analog modem card v.34) for dial-up clients. The speed for the connection is never more than 21.6k TX and 19.2k RX. Connetction works fine, only slow. Belief me I read all documention on CCO and now answers for this one. I try all the

New CCIE #8545 [7:29619]

this year, so I just squeezed in my certification before 2002. Good luck to the people pursuing their CCIE certification, you'll need it! Regards, Jacques Allison Senior Network Engineer CS IT Solutions Tel: +27 (0) 11 257 4000 Fax: +27 (0) 11 807 8992 Mobile: +27 (0) 83 327 4941 E-mail

Cisco Token Ring switch config [7:23756]

What is the steps needed on a 3920 Token Ring switch to configure vlans and a switch IP address that can be used for management (ping-able from network) Regards, Jacques Allison Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=23756t=23756

LANE IP problem [7:16257]

anything more than what I have know. If someone can give me a clue or method to sovle this problem I will be ever thankful ... O yes, I'm doing my lab on the 27th (Aug 01) of this month, so does someone have any last minute tips or any info that would help me pass this lab? Thanks Jacques Allison

PIX activation key on 4.1(6) [7:13187]

Hi all, On PIX ver 4.1(7) I can use the show actkey to display the connection license key, but the command is not on the ver 4.1.(6). How do I upgrade the PIX is I lost the original disk and license? I look on CCO and can't find any answers. Regards, Jacques Allison Senior Network Engineer

Static routes in CCIE LAB (definietion) [7:8515]

Thanks Jacques Allison CCNP + Security, CCDP Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=8515t=8515 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure

cisco secure scanner ping sweep error [7:8126]

sweep does the same. I have look on CCO for some answers but with no luck. (I'm not using a ISDN connection) Any Ideas please CC to [EMAIL PROTECTED] Thanks in advance. Regards, Jacques Allison CCDP, CCNP + Security Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=8126t=8126

CID 3.0 - Passed!! [7:3012]

) 100 questions 75.5 % to pass Can't mark or go back to previous questions. No scenario question like in DCN. Know your course book or the CID from CiscoPress and you will pass. Hope this help. Jacques Allison [EMAIL PROTECTED] CCNP, CCDP, MCSE, ASE Message Posted at: http

PIX Firewall amnger support totals

for your replies. Jacques Allison CCNP _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Re: Amount of PIX FIrewall supported

Where did you get this information? Thanks Jacques ""whatshakin"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Cisco Security Manager is good for 100. I believe the Cisco PIX Firewall Manager is good for 150. - Original

Amount of PIX FIrewall supported

HI all, Can someone please tell me where I can find more information on the total amount of PIX Firewalls that can be managed from one PIX Firewall Manager server, and which protocol is used between the PIX Firewall and the manager for changing the PIX configuration. thanks a lot!! Jacques CCNP

CCIE Lab

/jacquesa_2000/jacquesallison.htm Regards, Jacques Allison CCNP, MCSE, ASE _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Passed CCIE Written

Thanks for all your good info in the newsgroup!! Could have done it with out it. Regards, Jacques Allison **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http

CCDP 2.0 ?

?? Thanks!! Jacques Allison **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http

Re: CCDP 2.0 ?

the CID Exam (640-025) for CCDP. for CCIE Design, check http://www.cisco.com/warp/customer/625/ccie/certifications/design.html. Cheers, Thomas CCNA CCDA ""Jacques Allison"" [EMAIL PROTECTED] wrote in message 8s1c81$bdp$[EMAIL PROTECTED]">news:8s1c81$bdp$[EMAIL PROTE

NEXT_HOP attribute for BGP and IP routing table entry?

with the SAME NEXT_HOP attribute IP as all the BGP speakers in the AS have? Both make sense, but not sure which one will be used... it has to do a recursive lookup anyway! Thanks for your feedback Jacques Allison ___ UPDATED Posting Guidelines: http://www.groupstudy.com

Re: ccie written/job?

the practical to try the LAB. Regards, Jacques Allison "Dinesh_Kakkar" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hello Sabeen, From ur mail its looks like u don't have a cisco related job at present. I am surprised that without involving in cis

Frame-Relay traffic shapping

, and BE? If I configure the "bandwidth 64K" on the sub-interface of the serial link, how would this effect the CIR settings? Hope someone can help me with this one. Thanks a lot. Jacques Allison [EMAIL PROTECTED] ASE, MCSE, CCNP ___ UPDATED Posting Guidel