wondering
whether this is due to IOS version issues or not. I'm not in the office now,
so I can't check the versions atm.
Any comments on this matter would be appreciated. Thanks.
Kenneth
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=74551t=74551
.
Kenneth
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=74568t=74568
--
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and subscription info: http
to be the most challenging.
Well, time to end the festivities and begin preparing for the fearful CCIE..
though I'm not sure whether I should head off into Security or RS.
Kenneth
CCNP, CCDA
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=74076t=74076
a seat for
the exam :)
But, just to be safe, I guess I'll give my testing centre a call.
Thanks again Andy, for pointing this out.
Regards,
Kenneth
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=66963t=66945
--
FAQ, list archives
I'm also working on my CCNP, and at the same, keeping note of whatever I've
learnt to ease my burden on the progress for CCIE.
Good luck in your CCDP/CCIE.
Kenneth
Sudarshan N Chari wrote:
Hi All,
Just coming back from the exam room. Passed Support exam, my
last one
that was remaining
,
Kenneth
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=66945t=66945
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
How to configure a PC (win2K prof.) for testing DLSW in lab?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=61291t=61291
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
Folks,
I have a router with one 8M flash (Right now, it is running a flash with 7M
in the single flash.
And i plan to add an additional 8M flash into the spare slot.
After rebooting the router, i saw 16M Flash in place.
But I can't put in a larger flash: c2500-js-l.121-9.bin (14M) by copy tftp
Exactly one year as a made man. Time to start studying for the recert. So,
I'm back!
Ken
#7544
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=45937t=45937
--
FAQ, list archives, and subscription info:
Hi,
Just start to prepare home lab, I got token ring interface (C2521) and MAU
Hub. Where can I get the cable? What should I use?
Any comment!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=45018t=45018
--
FAQ, list archives,
Marko,
I perform
line con 0
escape-character 27
The crt-shift-6 x not working anymore. The Esc key not working as well.
Do you have some doc. about this?
Thanks!
Kenneth
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=44011t=43844
I found it difficult to use crtl-shift-6 to get back the terminal server.
Sometimes okay but sometimes not!
Can anyone help me? Can I change this with a simplier key?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=43844t=43844
Is there any commands/ tools that I can config on a router so that it can
perform ping test on another router regularly by its own.
RTR commands?! SAA ?! And how?!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=38197t=38197
--
yes and yes. (off the top of my head).
colin newman wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi
Are you referring to the BSCN book by Paquest and Teare? Is the Routing
book Vol 1 by Doyle?
Thanks
Colin
Kenneth wrote:
use the BSCN and Routing TCP/
I personally used BCMSN and Cisco LAN Switching, the latter is a really
really really really good book!
Shivjit Patil wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi..I have just finished my BSCN examinations. I used the Cisco BSCN book
for the examination. I found that book
use the BSCN and Routing TCP/IP, it's really good.
colin newman wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Congrats
What book(s) did you use for the Routing exam?
Colinscott wrote:
Thanks to everyone! Now onward to the holy grail
Scott Chapin, CCNA, CCNP
I got the following Cisco equipment for sales: They are all in good
condition.
1) US$22K (80% off) Marked price is US$72,355
Cisco BPX 8620 Cisco BPX Switch
FAN Cisco Catalyst Switch
Module 1: SUPERVISOR (WS-X6K-SUPIA-2GE) Cisco Catalyst Switch
Module 9: 8-port Gigabyte Ethernet
I am also interested to know if anyone has taken the beta exam. a few months
ago. I have post similar question but no candidate has attended the beta
exam.
Any suggestion on which testbook should be used for the exam.?
There are two Cisco Press books on MPLS:
1) MPLS and VPN Architecture and
2)
Did anyone try the ccprep.com CCIE Lab preparation workbook ? Please help
to comment on the workbook. I am planning to buy it.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=28165t=28165
--
FAQ, list archives, and subscription
Hi all,
Is anyone who has tried the lab. exercise offered by ccprep.com?
Is it good for ccie lab. preparation? If so, I will buy it. Thx.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=27782t=27782
--
FAQ, list archives, and
are 1645,1812 (authentication)
and 1646,1813 (accounting)
these should match the auth-port and acct-port in the radius-server command
Regards
Kenneth
Eric Hauptman wrote:
Does anyone have any pointers on getting a Cisco router talking
to IAS
running
on a Windows 2000 server. I think I have
Just start the CCIE Lab. preparation, I am going to have the lab. text in
June 2002. I have several C2500 routers at home. But no way to test the
ISDN configuration. Can anyone suggest me what simulator i should use that
can help me to test the ISDN configuration for the CCIE lab. I don't
Mike,
I saw this in ebay. Are you talking about this kind of simulator?
Any choice suggested? How do i know the C2500 routers are of S/T ports?
Please advice
2 Port BRI ISDN Simulator
Simulator Specification
ISDN Simulator with 2 BRI S/T ports.
ETSI Software (Cisco ISDN switch-type
Do you think it is worth to buy this simulator for the CCIE lab.
preparation? Any comments and advices are welcome.
Cisco Interactive Mentor: CCIE Expert Labs: Multiprotocol Challenge
Author: Cisco Systems, Inc. SRP: $99.95
ISBN: 158720035X Pages: 0
Pub Date: Oct 2001 Media: 1 CD-ROM
Would like to make some comments:
I am CCNP. I tried to review all the CCNP books, token ring paper, cross
reference to TCP/IP Jeff's book and Carlow's book. But i got 65 point
(failed) in the first try. I did Boston Test #1,2 and 3. I re-took the
exam in two weeks time. I got 88! Mostly
Based on the frame-relay (Chapter 4 2nd Edition)in Caslow's book:
S1 - HQ -S2
172.16.1.1 172.16.1.2 172.16.1.3
With home lab testing as the above setting,
I can ping from HQ to S1 and S2.
I cannot ping from S1 and S2 even though I have put in the frame-relay
Good to have support from all of you.
The problem is fixed. It is the config-register that was set to 0x2142
instead of 0x2102. I have never set this to 0x2142. Somehow the
config-register was set to wrong value. Maybe the config-register was
changed to that value when the upgrade failed the
it has a Ethernet port
for me to
connect the PC to it.
Kenneth
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=23625t=23498
Hi all,
Some findings. The problem is on the C2521. I can successfully upgrade
another C2521 with the same method. I tried to wr erase and reload before I
perform the upgrade on these routers.
So the issue is: What is the problem with this C2521? Any suggestion?
Routersh ver
Cisco
Hi all,
As a beginner, i am setting up home lab. Can anyone give me the detail
procedure of how to upgrade the IOS of C2521.
I got no problem with my C2503 because it has a Ethernet port for me to
connect the PC to it.
Kenneth
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i
Any comments?!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=21274t=21116
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Did any who has attended the beta exam for MPLS or QOS Beta Exam.?
I would like to know which material can be used to prepare for the exam?
Which books should I read? Is the books enough for the exam?
Appreciate any recommendation.
Message Posted at:
Is there nay benefit to using ACL over outbound? Both accomplish the same
end result for me .
|Ken Bourne,CCNA|Network Specialist|
|702-657-3432(direct)|702-524 1193(mobile)||[EMAIL PROTECTED]|
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=18101t=18101
Not sure what is CQS program.
But I have started the beta exam of CCIP.
Only US$50 per exam. I think CCIP's BCSI is quite similar to CCNP's BCSN.
I will also take the MPLS and MCAST+QOS next month.
Kenneth, CCNP/CCNA (CCIE one day)
Message Posted at:
http://www.groupstudy.com/form/read.php?f
) CCNP, ATM and VoIP Cisco press books
4) Routing TCP/IP Vol. I
Is one Carlow's book + Token Ring paper enough for the exam.? Is Carlow's
book on non-IP material enough to handle all non-IP question in written?
Please help if you have achieved the written test. Thx.
Kenneth
Message Posted
I heard that the CCIE written like CID. Is it true?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=15837t=15832
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
The answer is YES and DEFINITELY.
Remember to read the 4 cisco press books for CCNP.
If you understand and remember these 4 books, you can be certified even
without experiment/experience.
Because you are not ask to build a complete network. You just need to
demonstrate that you really
Just read Cisco web:
Effective immediately, the following topics have been removed from the lab
exam content:
LAT
DECnet
Apollo
Banyan VINES
ISO CLNS
XNS
ATM LANE
X.25
Do anyone see any questions above in the written CCIE exam?
Message Posted at:
We have several of them and have never had a problem.
|Ken Bourne,CCNA|Network Specialist|
|702-657-3432(direct)|702-524 1193(mobile)||[EMAIL PROTECTED]|
-Original Message-
From: Patrick Ramsey [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 08, 2001 4:11 PM
To:
Subject: Re:
Hi,
I will go for the CCIE written next week. I think I will go for the lab in
Dec, 2001. Nice to hear many of u just pass the lab. Is it include ATM,
VoIP, LANE, Token ring, DLW+, RSRB and SRB, etc...what is their weight.
It's good if all of you give me some advice. Actually I tried to
I used the Cisco Internetwork Trouble-shooting. It's enough to cover the
CIT 2.0 test. I passed the test with 88% score. As the material is covered
in the testbook.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=14763t=14751
--
I'm trying to get my home lab ready to take the CCIE R/S written and lab.
However, I need to know what equipment to get to complete token ring
section. I know I need a cisco 2502.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=13092t=13092
I was playing with config maker, and i tried to upload the config on the
router, config maker hang on the status rebooting cisco, so i terminate
configmaker on task manager.. and now i cannot console the router.. i also
cannot ping. any suggestions?
Message Posted at:
What kind of Database is this being authenticated to? NT SAM, LDAP,...?
nrf wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I am trying to implement a Radius dial access configuration, using
Ciscosecure 2.6 for Windows. I have noticed the following:
When I set up my NaS and
Because it's on a different router (The FR connections) and I'm using the
backup interface command on the remote routers to dial into a BRI router
Nelluri Reddy wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Why don't you have the hq initiate dialing?
Kenneth wrote:
nt group number
and
are hunted to the next available line.
Tom
Nelluri Reddy wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Why don't you have the hq initiate dialing?
Kenneth wrote:
Guys, I am currently configuring 12 remote sites connected via
frame-re
Use an SNMP viewer and go to its tree, it should tell you which interface it
is.
Make sure you load the proper MIBs
Tay Chee Yong wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi all,
I am currently plotting MRTG on a Catalyst 6509 switch. But I am unable to
decipher the
Absolutely. you can either use an access-class on the vty interface or just
use transport input ssh on the vty interface:
config t
line vty 0 4
transport input ssh
this should only allow the ssh protocol to go through instead of using the
access-class command:
I think he's asking about local username/password accounts.
FELIX KISSIEDU wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
set system name is the command to assign the hostname name.
set password is the command to assign the pasword. to assign the password
to go into enable
I had this similar problem on my setup just 3 weeks ago, I had to downgrade
to a 12.1.5T7 IOS image and it worked fine. But, if you want to require
encryption, make sure your RADIUS server support MS-CHAP-MPPE-KEYS. I am
using Funk's Steel-Belted radius configured with the MS-CHAP-MPPE-KEYS but
has anyone ever used the MS-CHAP-MPPE-KEYS attribute in Funk to make PPTP
tunneling work on a cisco router? I couldn't get it to work as the AAA log
shows:
MPPE: RADIUS keying material missing
Any inputs would help. I tried playing around with the .dct file but didn't
do anything that was
I think it cost us $1500 for a 30 day usage for about 250 nodes.
Justin Lofton wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
How much is the ISS software? Does anyone know?
Thanks Everyone!
Justin Lofton
Account Executive/CCNA
Tredent Data Systems
[EMAIL PROTECTED]
V:
Guys, I am currently configuring 12 remote sites connected via frame-relay
to our HQ. Each site has an ISDN connection for backup to our HQ. At our HQ,
I have a dedicated router to accept BRI connection for these sites except I
only have 4 BRIs.
The reason for this is based on my statistical
Cisco's site
search for configuring AAA
anthony moore wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Anyone got any good reference or know where to get documentation on
configuring TACACS+, AAA, and Cisco ACS server
Message Posted at:
What exactly is the question now?
wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
After disconnecting a SUN server from a Catalyst 6509, i tried to
telnet it and a proxy Network Appliance respond the telnet.
There are any strange IP configuration (no NAT, no virtual, etc.)
Hello , my Pix 515 is logging large amounts of denies from a host because of
ip option 0x14. I checked cco for the system message 106012 it tells me why
it is denying it but not what causes it . Can someone please give me or
point me to somewhere to find more info about ip option 0x14 and
Depending on what routing protocol you're using, the default-network forces
the router to advertise itself as the default gateway of the receiving
router... In case of EIGRP, if you don't explicitly create an ip route
0.0.0.0 0.0.0.0 x.x.x.x, the remote router will not know how to route
packets
Has anyone of you configured a router to connect to ATT's frame cloud? My
router is sending lmi's but ATT said all they see is that I'm sending 3
bytes of lmi for every frame when their frame switch was expecting 15 bytes
of lmi.
Also, can anyone provide me with the usual ATT frame information
I believe if you have a 1600, it only has one built-in ethernet port while a
1600R has two
I could be wrong but I'm pretty sure that's pretty accurate
Charles Manafa wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
mz is compressed and runs in memory
CM
-Original
thanks. There is a bug in 12.2.1 IOS that wouldn't let me connect via PAP,
CHAP or MS-CHAP. Now that I'm using 12.1.5T7, It's working better although
if I use Ms-chap, it lets me in but wouldn't let me ping anything unless I
disable PPP ENCRYPT MPPE which is not desireable at all.
I'm going to
FYI, it does work with Windows 2000 in every kind of combination
Kenneth wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I'm actually using Funk's and it does work now. I was using a buggy IOS =
12.2.1
The PPP doesn't work until I went down to 12.1.5T7
It's n
PROTECTED]">news:[EMAIL PROTECTED]...
Cisco's ACS v2.6 using Radius and Funk's Radius Server are the only Two
known Radius server's that support MPPE (Tacacs is not supported). I'm
willing to bet your not using either one of those.
-Rizz
-Original Message-
From: Kenneth [mailt
10:11 PM
Subject: Re: PPP Negotiation question --- HELP!!! PLEASE! [7:8438]
Kenneth,
Few strange this from following trace..
1. PPTP does comes in establishes connection which brings vaccess
interface up too..if thats the case then why outgoing PPP packets are
not
shown in debug. Try
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Kenneth,
Few strange this from following trace..
1. PPTP does comes in establishes connection which brings vaccess
interface up too..if thats the case then why outgoing PPP packets are not
shown in debug. Try turning debug vpdn packet de
Can anyone shed light on this problem im having.
I have 1 laptop with Sniffer pro and a router on the other end running PPTP
set for Ms-chap authentication.
When I tried to establish a PPTP session from the laptop to the router, all
it does is it times out. The router is acting as a PPTP
,OH
snmp-server contact Kenneth Lorenzo
radius-server host 192.168.1.195 auth-port 1645 acct-port 1646
radius-server retransmit 2
radius-server timeout 10
radius-server deadtime 2
radius-server key 7 XXX!
dial-peer cor custom
!
!
!
!
banner motd ^C
, dst=2604, seq=1252417484, ack=391249,
win=3928 ACK PSH
Rahul Kachalia wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Kenneth,
I cant see single LCP coming in..anyway provide following outputs
after
turning debugs on.
show radius statistics.
debug aaa authen
d
wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
it use SmartNAT
--
Kenneth wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
never mind guys, i read the radware whitepaper ang answered my own
question.
Thnx
Kenneth wrote in message
[EMAIL
ddresses that *have* to be advertised
from both ISPs so this will work quite well for us.
HTH,
John
Kenneth 6/11/01 6:16:56 PM
Has anyone deployed this? I'm going through their site and it doesn't
explain how it works without using BGP. We have a data center hosting
around
20 web-based app
Has anyone had any luck configuring PPTP terminating on a Cisco router
running IOS-FW.
I'm having problems with the PPP negotiation part and a Cisco Support
engineer told me I had to use MS-chap (ppp authentication ms-chap) in order
for it to work. Has anyone used this before without going with
I don't think Chris' was asking how to configure OSPF for point-to-point but
rather why.
From my experience, you can use it for when you don't want to subnet each
network and you can save IP Address by going to a multipoint network using
unnumbered interface on the nodes that connect to the
if you go with a 3500, the commands are IOS based. I'd recommend getting at
least a Cat4000 so you can play with the CatOS' set commands and possibly
other modules (an MSFC?). A 1900 should be good enough to practive with the
IOS. Ebay has a bunch - pretty cheap.
Kervin Pierre wrote in
can you check the last saved NVRAM when you do a show run?
norsyam ariffin wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
My config-register is 0x2102, the router is up running very well before
just a few day ago, the is lost configuration happened.
From: Yongchul Yang
To:
if the
primary ISP connection fails without using BGP as these products claim to
do any ideas?
Thanks, guys!
Kenneth
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=8085t=8085
--
FAQ, list archives, and subscription info: http
never mind guys, i read the radware whitepaper ang answered my own question.
Thnx
Kenneth wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Has anyone deployed this? I'm going through their site and it doesn't
explain how it works without using BGP. We have a data center
absolutely. I have a 1720 handling 2 T1 lines without any problems.
STRAND Scott wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Can the 2600 series router handle a T-1 or do I need to use a 3640.
Thanks,
Scott
Message Posted at:
If this is not a Cisco 7200, I believe it's only supported on the new IOS -
12.1(5)T upwards... otherwise, you only get L2TP and L2F. Hope this helps.
Rick Holden wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I am trying to configure a voluntary VPDN tunnel and am having
for flash memory, try CDW and search for Viking or Kingston memories. you'll
find plenty mostly at less than hald the price of Cisco flash memory.
Thomas wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Wow, it seems that the memory here are so cheap (in compare to Cisco).
I'll
s:[EMAIL PROTECTED]...
So did it work? I've been waiting all day to hear... :)
Alan~
- Original Message -
From: Kenneth
To:
Sent: Friday, June 01, 2001 7:38 AM
Subject: Re: Repost: GIADDR and Secondary Interface problems - help
[7:6741]
Thanks Alan.
Yeah, we do have a mai
guys have been great!!!
Kenneth
W. Alan Robertson wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Kenneth,
It sounds to me like a bug... Have you checked the Cisco bug
database?
Short of that, here's what I'd do:
First, remove the ip helper-address from the i
AFRL/PROI wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Try to create two subinterfaces the fa0/0 (fa0/0.1 and fa0/0.2)and place
the
ip helper 192.168.1.11 command on both subinterfaces.
Hope that work, good luck.
Mark,
-Original Message-
From: Kenneth [mailt
but I'm really trying to make this change as
transparent to the users as possible!
Thanks guys!
Kenneth
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=6695t=6695
--
FAQ, list archives, and subscription info: http://www.groupstudy.com
is not responding at which time, the secondary address will
be set as the GIADDR
Any ideas? I'm stumped.
Thanks!
Bolton, Travis wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Kenneth,
Our company does the same exact thing when readdressing user segments at
sites. Th
but I'm really trying to make this change as
transparent to the users as possible!
Thanks guys!
Kenneth
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=6568t=6568
--
FAQ, list archives, and subscription info: http://www.groupstudy.com
I'm not sure how TACACS+ is configured but I'm using FUNK's Radius and all I
had to do is do a return Attribute with "priv-lvl = 15"...
Depending on the user, if the user has this attribute set, then he'll
automatically be brought to level 15 without doing "enable"
Hope this helps.
Check this
You have 1024+1024 bytes which totals to 2048 bytes of RAM (2 Mb)
"vert" [EMAIL PROTECTED] wrote in message 97umes$vp3$[EMAIL PROTECTED]">news:97umes$vp3$[EMAIL PROTECTED]...
I just bought 2 Cisco 2524's and I am trying to check how much ram they
came
with. Can anyone inform me on how to view
Go to Ebay and you'll find people selling network modules and WICS.
If you don't want to bother with it, there are a lot of companies that sell
used Cisco modules if you look it up the internet.
Lastly, if you want it brand new, go to CDW or shopper.cnet.com
and search for the modules there.
I'm not sure who the provider is but 0 CIR sounds like "Sprint-speak". Most
service providers won't allow or recommends against 0 CIR but on the other
hand, Sprint pushes it.
We are currently using 0 CIR and I think the quality has been good and we
haven't had a whole lot of dropped packets. In
I'm curious, if you're connected to a switch, then you don't have control
over your public IP Addresses then such as DNS,... or is this mostly used
for office to office links as opposed to a gateway to the internet?
I guess the reason i'm wondering is we currently have an entire class C and
we
who won't
promise you anything.
You can pay, like i said, for CIR and their SLA will guarantee 99.99% packet
delivery up to CIR.
Lauren Child [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Kenneth wrote:
I'm not sure who the provider is but 0 CIR s
you might want to try real firewalls that provide a DMZ port. But if you
can't and if this is just a single webserver, you can use PAT (reverse NAT).
Search for it on the Cisco site to get more info on how to implement this.
"Howard Yuan" [EMAIL PROTECTED] wrote in message
97hhuk$o78$[EMAIL
go download openNap and look at the source-code, that should pretty much
explain 99% of your questions.
Hinton Bandele-NBH281 [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I am performing research into the technical underpinnings of the Napster
program that
can add IPX addresses to it, so it doesn't seem to
be an issue of layer 3 addresses. I think it just a
matter of Cisco IOS supporting it.
Michael
--- Kenneth [EMAIL PROTECTED] wrote:
try adding an ip address to it.
"Tim Lovelace" [EMAIL PROTECTED] wrote in
message
new
You can't run HSRP that way. Both routers should have an interface connected
to the same subnet...
"NetEng" [EMAIL PROTECTED] wrote in message
9711m7$jr5$[EMAIL PROTECTED]">news:9711m7$jr5$[EMAIL PROTECTED]...
If I have two routers running HSRP, what is the physical connection of =
the routers
NI Observer
Gary Witherspoon [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Anybody have a good recomendation of a protocol
analyzer they have used and liked. I have never used
one, and was hoping to see what you guys recommend.
thanks in advance
try adding an ip address to it.
"Tim Lovelace" [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]...
This seems to be incorrect. I tried this on a router I had spare and below
are hte results. It may be a newer feature, I am to lazy to look on CCO.
Tim
Router2#sh ver
Cisco
If this equipment is attached to an external CSU/DSU, you might have
loopback set on that equipment.
"Thomas" [EMAIL PROTECTED] wrote in message
96qjjv$94a$[EMAIL PROTECTED]">news:96qjjv$94a$[EMAIL PROTECTED]...
Hi All - I am bringing up a frame circuit from a remote site. However, I
pretty good. About the same price i paid for at ebay.
[EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi just one question dose a used 2503 worth $700? Cause I would like to
buy
it if its OK.
Thanks in advance
Tarry.
--
Sent through GMX FreeMail -
Jason is right. This will defeat the purpose of Spanning Tree of creating a
single path to a destination. The primary reason this was designed was to
prevent broadcast loops.
If you want to force it to use 2 paths to one destination, use
port-channelling which statically load-balances traffic
I don't think you can put a single port on two VLANS unless you configured
trunking if my memory serves me right.
with Per VLAN spanning tree a particular switch can belong to multiple
instances of spanning tree and in each spanning tree instance, it might be
acting as a root bridge, some ports
1 - 100 of 246 matches
Mail list logo
