Re: Query on VOIP [7:59933]

Try to build a Tunnel between 2 endpoint ss ss wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hello all!! I am working for a carrier company who uses ip network consisting of Cisco Routers to transport voice calls.The company deals mainly with pre-paid calling cards.The

Emergency: Any one have CiscoWorks Voice Manager software ? [7:59935]

Can share the software to me ? I just use it for testing. Email: [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=59935t=59935 -- FAQ, list archives, and subscription info:

any good linux BGP simulator [7:46088]

please mail me : [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=46088t=46088 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure

Emergency: HOw to extend the telnet timeout for a router? [7:45216]

Hi, all the default timeout for a telnet session is 300 sec Any command can extend the telnet timeout time ? Please mail me [EMAIL PROTECTED] Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45216t=45216 -- FAQ, list

Re: How can I measure traffic through a 2600 router (over [7:43361]

MRTG Wayne Jang wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I have a client that wants to know how much traffic is passing through his router. They are ordering new service and want to know how much bandwidth to order. What utility should I use? Thanks Wayne

Any body has experience in Cisco SS7 VOIP solution [7:43096]

I have some questions need to consult those people who have experience in SS7 VOIP solution Please contact me [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=43096t=43096 -- FAQ, list archives, and

Re: CISCO 2600 NAT [7:43139]

is the service port 5080 started on the server ? jc theard Hello all, I'm trying to configure NAT on a CISCO 2621. I managed to configure it basicaly but I want to use overloading and there is my problem. As shown below I try to specify a route to the right server for port 80 and port

Re: win98 pptp connection to cisco concentrator 3005 only at [7:41438]

Which modem pool device you are using for accepting dialup service ? suaveguru hi all, anyone can tell me why whenever I connect a win98 pptp client to a cisco concentrator vpn server 3005 via a pstn connection at 56kbps I always only able to connect it at 9.6kbps . Whereas connecting to

Re: How to configure Mobile ARP?? [7:40013]

at cisco web site.. you can find out the sample config for the mobile ip solution with clear explanation ~ Cool~~~ ^o^ IT Guy Yeah.. SOrry for Typp From: Ocsic Reply-To: Ocsic To: [EMAIL PROTECTED] Subject: Re: How to configure Mobile ARP?? [7:40013] Date: Mon, 1 Apr 2002 02:51:38

Re: How to configure Mobile ARP?? [7:40013]

do you mean Mobile IP ? IT Guy Guys, Can you pleasee help me to forward some Link or Right procedure for HOW to configure Mobile ARP?? I can see the Docs in CD and on CISCO but its very long procedure whereas the procedure the guys are used to discussed here on list is a short one

Re: Cisco view Problems [7:39764]

upgrade the java maamun Murangwa Hi all, I'm having a problem with viewing devices using cisco view, i get an error message ''Please grant permission to launch cisco view.Quit the browser and try again'' I have looked at the installation notes no luck so far. Any help will be highly

Re: ACS 2.6 problems [7:39023]

CRACK IT ~~~ next time please remember to use local authentication then the radius server, and create a local user before testing the Radius server is work or not.. aaa new-model aaa authentication login default local group radius username localuser password localuser maamun Murangwa

CCIP has no certification ? [7:38576]

One thing I want to ask I had finished CCIP/Security 2 monthes ago... But I only receive the CCS1 Certificate. Actually, CCIP has no Certification even in Cisco Tracking system There only has CQS logo for download, no CCIP logo appear although you got the CCIP title. Message Posted

Re: CCIP has no certification ? [7:38576]

Oops... Already received Cisco [EMAIL PROTECTED] 's Email They had already updated the Tracking and the LOGO and Certification of CCIP will be sent out soon. =^o^= Wait for 2 monthes la Ocsic One thing I want to ask I had finished CCIP/Security 2 monthes ago... But I only

Re: CCNP Foundations Exam [7:38484]

if you dont try you will not success... go and take the foundation exam... you can pass CCNA...means you can also get CCNP easily Larry Youngquist I recently completed my first step and got my CCNA.I've got quite a bit of experience, but had never ventured down the Cisco

Re: ospf and static routes [7:38107]

Please specify more detail info about your case NetEng If I have a static route to the outside world, how do I add that to OSPF? Do I have to create static routes on my ABR to get outside? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38122t=38107

Re: Understaning Custom Queue - dual link (PPP / Frame relay) [7:37823]

may be you can use the following mathod instead of CQ. Cause CQ is custom queue, maybe it will lead to a delay in the VOIP if the queue-size is not optimized well. So, may be you can use NBAR to adjust the bandwidth consumption between the Voice IP traffic and normal IP traffic first you define

Re: Understaning Custom Queue - dual link (PPP / Frame relay) [7:37824]

may be you can use the following mathod instead of CQ. Cause CQ is custom queue, maybe it will lead to a delay in the VOIP if the queue-size is not optimized well. So, may be you can use NBAR to adjust the bandwidth consumption between the Voice IP traffic and normal IP traffic first you define

Re: Understaning Custom Queue - dual link (PPP _Frame relay) [7:37825]

may be you can use the following mathod instead of CQ. Cause CQ is custom queue, maybe it will lead to a delay in the VOIP if the queue-size is not optimized well. So, may be you can use NBAR to adjust the bandwidth consumption between the Voice IP traffic and normal IP traffic first you define

Interesting [7:37826]

IN this newsgroup if you type a special sign , the news will be break by the newsgroup ... this sign is OK but if you use the arrow pointing to the left sign, the news will be stoped. so in my previous news, 2 of them are chopped off by the news server. ^_^ Message Posted at:

Re: CCIE#8903 [7:37490]

Congratulations! George Zhang All, The title says it all. I took my first attempt at the CCIE lab test yesterday (March 5) in Halifax and received the Congratulations on Passing the CCIE Lab! this morning. I was the only person taking the lab test in Halifax yesterday. I was told that

Re: Simulation on PIX firewall before deploying on the [7:36564]

According to Cisco Partner Lab Requirement... The LAB also using 2 Cisco PIX 515 why dont you refer to Cisco Partner Security Lab Requirement and build one in your office to simulate the Clients Situation the lab include Cisco Concentrator, PIX, . etc Brown, M wrote in

Re: Passed CSIDSPM Exam!!!!!!!!!!!!!!!! [7:36306]

Congratulations! Godswill HO Am very grateful to you all. The group really helped me through out my CSS1 exam track. It has been a big learn place where knowledge is shared.I sat and passed the Cisco Secure Intrusion Detection Systems with Policy Manager(CSIDSPM) version 2.1 exam today to

Re: VPN Services in PPTP .... [7:36197]

Search Virtual Private Dial Up network config.. (VPDN) Mahesh Hi, Can some one give me the advice that how we can configure PPTP on cisco router and my centers can access the my network. We are using the win2000 at client place and we are trying to have VPN solution for the user. So that

Re: Nortel NNCA certification [7:36190]

any NORTEL NEWSGROUP ? James Barber Hi, firstly my apologies for posting this in a Cisco group. However, there are (still) other networking vendors, and I'd like to get the groups opinion on the Nortel NNCA certification. James

Re: PIX Support in CW2000 [7:35381]

try upgrading the RME with PIX 2.0 package in the CiscoWorks 2K Danial Morison Hi group, I am trying to add Cisco PIX firewall in CW2000,RME.Error I am getting is Unable to connect to the device.I have used the diagnostics tools and they are showing that PING,NSLOOKUP,TRACEROUTE are

Re: cisco security certification equipment list [7:35213]

Intrusion Detection System Concentrator 3000 Series Cisco Pix Secure Management Software Ken Tony Chen What kind of equipments do I need for the following security exams? Router: IOS: PIX firewall: Tacacs+ server: 640-442 MCNS: Managing Cisco Network Security (MCNS) 9E0-571

Re: Why do some TFTP sessions take a lot longer [7:35006]

try checking the NIC card duplexing and speed setting sometimes this things will hamper the job^_^ Ozzie Sutcliffe When I do the TFTP lab in class.. I have 6 routers 6 PC and 6 Xover cables All have the same configs except for IP addy's Yet when the class pulls down the IOS

any one have Cisco SS7 Interconnect with Access Server course [7:34698]

please mail to me thx Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34698t=34698 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to

req: twins °¦¥Í¨à ·sºÐMP3, ¦P·R±¡·í¤J¾ê¼@³õª© [7:34385]

thx Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34385t=34385 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

wrong post [7:34387]

wrong post. sorry Ocsic thx Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34387t=34387 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure

Re: twins °¦¥Í¨à ·sºÐMP3, ¦P·R±¡·í¤J¾ê¼@³õª© [7:34385]

wong post Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34388t=34385 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL

Re: wireless problem. [7:34110]

Have you tied the TCP/IP stack to the Wireless PCCard?? 1. Check the local loop-back address: ping 127.0.0.1 if this doesn't work then check if there is a IRQ conflict with the PC-Card drivers/hardware 2. Check the IP node address: ping x.x.x.x (where x.x.x.x is the IP address of your node)

Request Training material [7:34238]

Anybody has the following training material (softcopy) ? Cisco SS7 Interconnect for Access Server Cisco SS7 Advanced Troubleshooting Cisco SS7 Interconnect Solutions Cisco SS7 Interconnect for Voice Gateways Solution Cisco SS7 Packet Tandem Solution Can mail it to me ? Thanks! Message

Bridge-Group Circuit-Group? [7:33356]

Hi All! Has anyone tried to group 2 serial interfaces on the same router to act as a single bridged connection (load-balanced)? I've got bridging working OK, but Spanning Tree kicks in and blocks one of the serial interfaces from forwarding! Having checked the commands for this feature,

Re: Router problem inserting into token ring [7:33304]

Try the troubleshooting techniques from Cisco - http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/index.htm select Token-Ring and follow the instructions! If that doesn't give you any luck then turn on debug and check the status of the interface... Also if you have CCO then dump the

Emergency: Any body has the Course Material of Cisco SS7 [7:32582]

Hi, everybody, Any body has the Course Material of Cisco SS7 Interconnect for Access server ? Cause I need to implement this system soon, if you have please Email to me: [EMAIL PROTECTED] Many Thanks! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=32582t=32582

Re: Emergency: PIX 515 password recovery [7:31514]

for my case, once I use default password cisco to enter it... the aaa configuration take effect, and it prompt out Username: passsword:immediately How can I use write erase command. My situation is that the original AAA configuaration is still active, it will make a great

Re: Emergency: PIX 515 password recovery [7:31514]

ha ha~~~ already use this method to retrived the password... Thank you for all people ~~ Engelhard M. Labiro How about setup a temporary AAA server with an userpassword and login with that username? You can use sniffer for the IP address of AAA server going out the PIX interface.

Re: PIX with no NAT [7:31353]

may be you can use for example internal network: 192.168.1.x / 24 external network: 200.100.100.X /24 you can use this static command static 192.168.1.0 192.168.1.0 netmask 255.255.255.0 0 0 access-list OUT permit ip any any access-list IN permit ip X.X.X.X any access-group OUT interface

Re: Passed CCNP Exams [7:30080]

The greatest Christmas Gift. Congratulations! Bravo! Well Done! Stanton Hi, Passed CIT yesterday with 942 and got my CCNP as a gift of X'mas for myself. I spent about 2 months to pass all the CCNP exams with good scores: Switching 946, Remote 920 and Routing 962. The books I used for

Re: About ACS 2.3.5 for UNIX [7:30002]

Why not use ACS 3.0 ? It is released! fmxiao Hi all in group anyone can answer the question below. does Cisco ACS 2.3.5 (for UNIX) can install and run under solaris 8 ? thx in advance. Roy Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=30029t=30002

Re: VoIP Problem: Billing Triggered Before Authentication [7:28284]

in the aaa accounting command , just use stop-only so that the AS5300 will triggered the Radius accounting server when the call is stop. Patrick Donlon What billing system are you using? Is it based on the PSTN Switches or do you use Radius accounting? cheers Pat Chong Chun Wei

Any one has experience in Cisco AS5400 ? [7:27907]

the 8port T1 or E1 card on the machine is stable ? any one has tested some seldomly use codec like g.729ab ? is the machine better than AS5300 for VoIP feature? I dont know whether it require VC-WARE to load the DSP card, because in the catalogue it did not mention about the voice card info.

Re: Configuration of Channelized E1 [7:27237]

try e.g conf t cont e1 0 channel-group 0 timeslots 1-31 then you will see a virtual interface appear int s0:0 then conf t int s0:0 ip address 1.2.3.4 255.0.0.0 this will use timeslot 1-31 of the first e1 to be 1.2.3.4 for different timeslots just use a different times slot group e.g

Re: Passed Cisco Secure VPN! [7:25635]

Great... Any study material you like to share... Theodore stout wrote in message news:[EMAIL PROTECTED]... Man this test was hard! I got over 850 on it. This was incredibly difficult. What I would recommend is to know the environment of VPNs and not just Cisco's implementation of them.

Anyone has Cisco Content Netwokings training material ? [7:25718]

Can mail to me ? Thanks ^_^ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=25718t=25718 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to

Re: Need Urjent help and save my Job.(configuring 2600 routers [7:24583]

how about using CSS , and set a virtual IP for the 2 real server and running round ribon mode... ? Rishi Hi John, I want to know how to configure the routers for load balancing. Here is the situation. I have 3 2610 Routers.One is having two serial interfaces.What i want is the two

Re: Need Urjent help and save my Job.(configuring 2600 routers [7:24594]

hould do it...!! From: Ocsic Reply-To: Ocsic To: [EMAIL PROTECTED] Subject: Re: Need Urjent help and save my Job.(configuring 2600 routers [7:24583] Date: Mon, 29 Oct 2001 18:44:14 -0500 how about using CSS , and set a virtual IP for the 2 real server and running round ribon mode... ?

Re: Multilayer Switching [7:24595]

did you enter into the MSFC session ? Thomas N. wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Anyone have any problem turning on VLAN interfaces that are running on NAT protocol? I couldn't turn VLAN on my 6509 that has ip nat inside statement. Thanks! Thomas N.

Re: Cisco ACS problem [7:24453]

you have to do some configuration on the router to enable the router send the RADIUS info to the ACS server. aaa authentication login radius radius-server host 1.2.3.4 auth-port 1645 acct-port 1646 radius-server key abcdefg then in the ACS Server add the appropriate ITEM in the router

Re: HSRP Problem [7:24358]

first, ensure both router's ethernet port are connected with the same lan open debug ip hsrp on each router to debug the status of the ACTIVE , STANDBY. Kevin Pan One day, I discovered that one of the router continuously display an error message from the console showing that there is a bad