RE: HSRP - hows it work [7:24721]

Hi group, Who have used the 'standby track serial 0' command before, while configuring HSRP. I tried it and was disappointed because, my two upstream providers are connected via a radio (microwave link). Even when one of them is down, the radio coneected to the router still send keepalives to t

RE: HSRP - hows it work [7:24721]

Hi group, Who have used the 'standby track serial 0' command before, while configuring HSRP. I tried it and was disappointed because, my two upstream providers are connected via a radio (microwave link). Even when one of them is down, the radio coneected to the router still send keepalives to t

Multihoming Without BGP!!!!!....How Posible???? [7:20305]

Hi all, first let me pay tribute to my numerous Networking colleagues, who lost their life while in active service at WTC and Pentagon that fatefull Tuesday and may God grant their love ones in this group the courage to bear the lost. I stand with the popular side 'Terrorism must be completely st

Undefined Port Adapter type 55 at bay 1 [7:20112]

Hi, I have a 2621 router with 8M flash and 32M Ram. I inserted a network module with 1 ethernet port into it, the IOS 12.0 did not recognize it. It only sees the FastEthernet ports that came with the router. Upgrading the memory to 64M did not help issues, Changing the module with two other once

Boson Test 1 & 2 For CID Exam - - - How Good?????????? [7:19134]

Hi group, Just wondering how good the boson test would be in preparation for my CID exam? Any one with valuable clue and other exam last minute advice please you 2 cent is welcome. Regards. Oletu __ Do You Yahoo!? Get email alerts & NEW webcam vi

CID Exam!!!--- - - Stratacom Switches [7:18476]

Hi group, Am bill to write my CID exam in 4 days time, am using the cisco press book. However, the book did not give stratacom switches any treament except for a few lines and they test this area heavyly I learnt in the exam. I have done a lot of searches even in CCO but could not locate any whit

CID Exam--How difficult????????? [7:17497]

Hi group, Am finally going for my CID examination on Saturday. Has any one written the exam lately? I heard that cisco is planning to change the course content. What is its difficulty level? I already have CCNA, CCDA and CCNP. I understand alot of people do fail this exam, what are the t

CID exam --How tough [7:17316]

Hi group, Am finally going for my CID examination on Saturday. Has any one written the exam lately? I heard that cisco is planning to change the course content. What is its diffulty level? I already have CCNA, CCDA and CCNP. I understand alot of people do fail this exam. AM using the Cisco Intern

VoIP Traffic Shaping Config [7:14451]

Hi folks, Hope this newsgroup does not make me lazy!!! hehehehehe I have a problem guys. I have a Cisco 3640 configured with an FXS voice module (2 voice ports). I am contending with a 28.8k link to my head office. I do voice and data on that link. However, i need to restrict my voice calls

Re: my test [7:10340]

I envy your courage, keep it up. The most important thing is to keep the fighting spirit on. Do not quit, you will definitely win. I had the same experience, CCNA was my first certification exams, the exam was changed from version 1 to 2, July last year and when I was preaparing for the test. I w

Re: BCRAN test....was there fill in the blank? [7:10284]

No, I did BCRAN last week, the commands did not require you to know the modes and you do not need to type in the modes, it was exactly like this: For the purpose of making it clear so that many will benefit, am going into these example question, it does not represent any exact exam question, it i

CCNP At last!!!!!!!!!!!!!! [7:9853]

It was not easy but it is over, I wrote my four exams like this: Routing 2.0 ==20/4/2001 Switching 2.0 ==04/6/2001 Support 2.0 ==12/6/2001 Remote Access2.0 ==23/6/2001 I almost went to sleep after Routing 2.0, but it is easy. Which next Design track or Security track or CCIE wr

After CCNP what Next [7:9149]

Hi Everyone, I have just Remote Access 2.0 between me and my CCNP cert and by Saturday this week, I would have been a CCNP certified. My problem seem to be the way forward, before now I had been thinking of getting my CCDP before focusing strength on the all important CCIE. I seem to gather last

Please Help with VLSM [7:9024]

Hi group, Please just throw more light of this. If I have a block of ip address, can I use different subnets for different purposes like this: If my block is 216.73.203.0 1. 216.73.203.0/26 4 Networks, 64 Hosts each 2. 216.73.203.0/27 -- 8 Networks, 32 Hosts each 3. 216.73.203.0/28

Confused about Cisco Agreement [7:8819]

Has anyone really taken time to read and thoroughly understand the Cisco examination agreement page? The item 6 in that agreement reads(ie page 2 of your score sheet) "Not to sell, license, distribute, give away, or obtain from any OTHER source OTHER THAN CISCO the exam materials, questions or an

CIT Down 1 to go [7:8311]

Hi Group, It was not easy, but it all ended well yesterday by my passing the CIT exam with 885 scores. What surprised me most was the grouping of the exam. I was scored 75% in HDLC and I can't remember answering any question on that. I wrote Switching 2.0 last week Tuesday, With my passing Suppo

Which is the Best Book on the CID test [7:8117]

I will be writing my CIT today, I wrote Switching 2.0 last week Monday and will wrap up my quest for CCNP next week by writing Remote Access 2.0 . I would have taken the CID next week instead of Remote Access, but for want of the real book to go for. My target is to become a CCNP and a CCDP by the

Where is the Missig Link [7:7304]

Hi Group, Please if you can just drop a line across to me, it might really help me. Has any one install a 2600 series router at the other end of a microwave radio link through the ethernet port be it 0/0 or 0/1? I have tried this on several occasions but it would not work, for reasons I have no

Two(2) Processors [7:4499]

Hi group, I have a little proble on my hands. I have an NT4 server running sp4. There are two processors in it, it is a compaq system. It also have two processor controllers installed. My problem is, the hardware sees the 2 processors at bootup and displays information regarding both, but NT st

Samba Client and FTP Client [7:4154]

IF i use samba client to retrieve a file from a samba server, where will the retrieved file be placed in my local machine? It is same with using FTP. How can I control where the retrieved file(s) should be placed in my local machine. Regards. Oletu. _

BCMSN Exams [7:3157]

Hi All, Am bill to write this exam next week. I need some helping tips: 1. What is the pass mark for the exam? 2. Am using the Cisco press book for BCMSN by Karen Webb. Is this book enough? Surprising, this book did not cover topics like DDR, Cisco TAC/CCO, ATM/LANE, etc which I gather from cisc

Best CCIE Books and Resources [7:2229]

Hi all, Which among the many are the best books with which one can comfidently prepared for both the CCIE written and Practicals (Routing & Switching). I will be glad to receive the complete sets of necessary books and resources for this all important examination especially from those who have a

Help on BCMSN [7:2191]

Hi all, Has any written BCMSN recently? Are the commands 'Set based' or IOS or both. Where they any Switch specific questions e.g catalyst switch 5000, 5500, 2926G, 1900, etc. Are the commands from a poll where you select the right one just like in BCSN? Writing BCMSN in few days, any additinal

WAN Connection Through Ethernet Interface [7:1955]

Hi, Is it possible for me to connect a production WAN interconnecting two cisco routers with a microwave radio link in between through their ethernet interface? Or must it be through the serial interface. I have a cisco 2621 and 2511, with no add-on card. Which means, I just have 2 fastethernet

Strange Configuration, Strange Result [7:1763]

Am trying to connect two cisco routers each on both side of two speedlan radios and antenna. In place of the second router was a 3com switch before now, and with that connection I can browse the internet. I now replace the switch with a router, the connection from the radio into the router was ma

Strange Connection [7:1647]

Am trying to connect two cisco routers each on both side of two speedlan radios and antenna. In place of the second router was a 3com switch before now, and with that connection I can browse the internet. I now replace the switch with a router, the connection from the radio into the router was ma

Passed BSCN 5 Minutes Ago [7:1379]

Thanks for your help and encouragemnets, 1 down 3 to go. The next is BCMSN is the next. I will appreciate necesary study links, on line test/materials. Will be taking BCMSN is two weeks time. Regards. Oletu H. G. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=1379&t=1379 --

EIGRP BandWidth SOS [7:1284]

Please help me out. I have booked for my BSCN for tomorrow, I use to know that to get the eigrp's metric=1/bandwidth but on reading cisco white paer at www.cisco.com/warp/public/103/eigrpwp.pdf, Ciscco is making me to believe that the formula should be 1000/bandwidth. Am confused. Ol

NT Multiple RAS Connections [7:938]

Though very small but defying all remedies, maybe my intense preparations for my CCNP have taken better part of my memory. How can I disallow multiple connections through RAS into my NT 4 server? I have check all settings seems not to be finding the clue. Sometimes my dial-in clients connect into

Re: Snapshot Routing

Sorry, Snapshot routing is purely for Distant vector routng protocols, so eigrp is out of it. Static routes will solve your problem. Thanks Oletu H. G. >Guys, > >I know that snapshot routing support RIP and IGRP >but .does EIGRP >support >snapshot routing? >I had configure EIGRP and snapshot.

Re: napshot

__ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/?.refer=text _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and

How can I read these files

With what application can I read files with Extentions: .ps .piff .unk Where can I download these files. Thanks to all. OLETU _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to

No Domain Server Found

= the only difference is that both NICs from the Proxy server PC are not = connected to the Switch, one is connectec directly to the gateway and = the other to the LAN. I believe I am missing something out somewhere, the multi-million dollar = question is 'What is that?. Thanks in advance. OLETU

VoIP Installation and Configuration

that is why I am doing = this. Thanks in advance. OLETU Hosea Godswill, CCNA _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]