Another one is www.addall.com
Richard
Steiven Poh wrote in message
news:[EMAIL PROTECTED]
Hi All,
I remember there is a website can search by ISBN number and let you
know which books store are selling cheap price.
But I can recall at all, any member here can help ??? Thanks
Cheer
Has anyone else noticed the increase in Cisco advertising over the last week
or so? I'm seeing a TV add almost everyday. Could this be the result of
Cisco possibly having some statistics leading them to believe an increase in
IT spending is forthcoming? I hope so!
Richard
Message Posted
Priscilla,
Oh I'm always much too promiscuous for my own good normally ;). I've
checked that setting and from my end it seems to be on by default (checked
and yes it is). I did some further work on this last night and I was
eventually able to see some of the mirrored traffic. I didn't change
Randy,
Have you ever gotten ISDN to work between these routers by checking end to
end connectivity via ping?
Rich
McHugh Randy wrote in message
news:[EMAIL PROTECTED]
Can anyone spot a problem with this configuration as to why it may not be
working - R1 is connected to R2 with an isdn
]
you have the analyzer and the router in the same port ?
1/2 according to the below text ?
set span source-port dest-port in/out/both
Larry Letterman
Network Engineer
Cisco Systems
- Original Message -
From: Richard Burdette
To: [EMAIL PROTECTED]
Sent: Saturday, March
Priscilla,
Inline replies.
Priscilla Oppenheimer wrote in message
news:[EMAIL PROTECTED]
Richard Burdette wrote:
Sorry for the typo, bit of port dslyexia perhaps, the analyzer
is in 2/3 and
one of the routers is in 1/2. I used the command correctly on
the bridge
but I mis-typed
Ok, I'm trying to capture TCP, specifically Telnet traffic going between two
routers on 2 ports of the bridge. I have a protocol
analyzer on port 1/2 (I've tried other bridge ports as well). The routers
come in on 1/2 and 2/3.
To start I enter the command 'set span 2/3 1/2 both' on the 5000
Hello,
I'm studying for the Support exam using the CiscoPress books and Trouble
Shooting Campus Networks from Priscilla. I must say that the Trouble
Shooting book is excellent on its own, but especially so as compared to the
CiscoPress offerings.
Anyway I've been playing around with NetMonitor
Comments in line.
Priscilla Oppenheimer wrote in message
news:[EMAIL PROTECTED]
Richard Burdette wrote:
Hello,
I'm studying for the Support exam using the CiscoPress books
and Trouble
Shooting Campus Networks from Priscilla. I must say that the
Trouble
Shooting book
the password.
Richard Burdette
Jason Steig wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I'am working on a Boson's CCIE lab with a friend and we are working on
setting up privilege levels for users who need to telnet to the router.
User1 needs to have access to just
Hello All,
I'm attempting to configure trunking on a C2924-XL switch runiing IOS
version Version 11.2(8.10)SA6 from file c2900XL-hs-mz-112.8.10 SA6.bin. I've
read CCO enough to realize that the command under interface configuration
mode would be switchport mode trunk. However, the switch does
Hello All,
I'm attempting to configure trunking on a C2924-XL switch runiing IOS
version Version 11.2(8.10)SA6 from file c2900XL-hs-mz-112.8.10-SA6.bin.
I've read CCO enough to realize that the command under interface
configuration mode would be switchport mode trunk. However, the switch
does
K,
I recently went through this thought process myself and in the end went with
the 5000 series. I based my decision of several items;
1. I already had a 5000 switch.
2. CCNP switching track knows nothing of the 3550
3. Expense, I added a SupIII engine and RSM on my 5000 relatively cheaply
One
of the router?
Richard Burdette
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=62350t=62350
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
On groupstudy.com I can post via the website but not via email or a
newsreader. Even when I send a directed email to Paul or any other address
@grouptudy.com, I get an access denied message. Paul, if you see this can
you tell me why?
Richard Burdette
Message Posted at:
http
Not quite on topic, but since I need it for my home lab... does anyone have
any spare Boot Rom's for a 4700M series router better then 11.1(2)?
Richard Burdette
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=62295t=62295
--
FAQ
but I canÂ’t quite figure out how.
Help?
Richard Burdette
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=61950t=61950
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
Just before I got your reply, I finally found a document on CCO that
explained that I had to have the 'ip pim rp-address ...' configured on both
routers which I did. No I'm not seeing the earlier problem about not being
able to join the Auto-RP router.
As I was seeing before, I can see the
Try this link http://www.atstake.com/research/lc/download.html for what used
to be the lopht heavy industries web site. It's a fair tool, especially if
the password can be found in the dictionary.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=61819t=61807
I've completed the BCSI and BCRAN exams toward the CCNP. I'm now working on
the Switching test and wonder if my home lab is robust enough for the task.
What I have is an old Cat5000 (w/ 12 port 10/100 blade) with a SUP I engine
and a 1912. I know that I can play lab rat with many of the
Concerning BCRAN, I don't see anything in the current exam topics that
specify the configuration of a Cisco 700 series router. The Cisco books I
have (605 series) devote an entire Chapter on this topic. Was it relevant to
the 605 exam and not the 606? I'm reading the chapter anyway as I have not
A prep test I am using has a question for which I disagree with the answer.
Here is the questionÂ…
If I had a Class B address, what subnet mask would I use if I wanted to
split it into 8 class C addresses?
a.255.255.240.0
b.255.255.255.0
c.255.255.248.0
d.255.255.254.0
The answer from the
I'm working on a lab frame-relay/OSPF scenario where I'm getting
unexpected results. I have a 4000 router acting as a frame switch with
a fully meshed frame cloud with 4 routers attached. I configured the
routers to be in NBMA mode via the 'ip ospf network non-broadcast' which
I realize is the
23 matches
Mail list logo
