There ok, but I have many many inaccuracies with the practice tests they
offer. I used it for the CCNP stuff (CLSC and BCRAN I think), only because
my company had an account there. I would probably not pay my own $100 for
it.
HTH
Scott McClure
""Rah Sta"" <[EMAIL PROTE
There isn't any in the R/S CCIE track. Just touch on it a little with
DLSw+.
""Atef Rostom"" <[EMAIL PROTECTED]> wrote in message
92jbni$dbm$[EMAIL PROTECTED]">news:92jbni$dbm$[EMAIL PROTECTED]...
> Didn't find anything about SNA in the blueprint at cisco.com !!
>
>
> ___
to a Novell server that was a file server which had
> it's drives mapped to NT drives. So IPX should take a big back seat to IP.
>
That's a pretty cool trick. Tell me how to convert my IPX network to
100BaseT and how I map my Novell server's drive to NT drives. WOW!
My $.02
these other tracks really catch hold, I think you will see more people
moving away from the R/S tracks and into the areas of specialized knowledge
and experience required for their particular jobs, as you so deftly stated.
Scott McClure
""Howard C. Berkowitz"" <[EMAIL PROTE
mping up for the
lab
Scott McClure, MCNE, CCDA, CCNP (+Written)
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Can you give us an idea of hom much you want for each?
"my cisco" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi
>
> The following routers are up for sale at 50% of cisco costs(negotiable).
Any guys interested may pls mail me back. These routers are basic
Craig's right on. The 4000 series is positioned as a distribution layer
switch, allowing you to aggregate more gig links from the access layer. So,
for a customer decision, 4K is the way. Don't know about the test though.
Scott
""chenriqu"" <[EMAIL PROTECTED]> wrote in message
000101c06a5c$2
The load on the link is 23/255 or roughly 9%
--
When I disagree with a rational man, I let reality be our final arbiter; If
I am right, he will learn, If I am wrong, I will; one of us will win, but
both of us will profit.
- John Galt
"Study Cis
You are on the right track with what you are doing...
--
When I disagree with a rational man, I let reality be our final arbiter; If
I am right, he will learn, If I am wrong, I will; one of us will win, but
both of us will profit.
- John Galt
"
You should just go take the DA test, especially if you have any sort of
consulting experience. Most of it is just good common sense. I agree with
Karl, though... you best course of action would be to finish the rest of the
NP/DP track instead.
--
When I disagree with a rational man, I let real
We ran into a similar problem on a recent project. I think the confusion
comes when you try to address the GigE ports of the L3 card as "switch
ports" instead of from the router configuration. When you try to SET TRUNK
2/1... only dot1q will show up. If you session into the L3 router, then
IS
It's VLAN Trunking Protocol. Transparent means it won't use any of the info
learned from VTP, just pass it through to other switches in server or client
mode to use. On a "transparent" switch you have to configure your VLANs
manually.
--
When I disagree with a rational man, I let reality be ou
It means you want use the ip of another (specified) interface, e.g. ip
unnumbered ethernet 0, as the ip of your serial interface.
--
When I disagree with a rational man, I let reality be our final arbiter; If
I am right, he will learn, If I am wrong, I will; one of us will win, but
both of us wi
They are base 2... the wildcard mask is sort of like a subnet mask, but
adding up the bits from right to left, where a 0 means the address bit must
match and a 1 means you don't care.
--
When I disagree with a rational man, I let reality be our final arbiter; If
I am right, he will learn, If I a
y do his own work. He doesn't learn from cutting
> and pasting...
>
> andy
>
> On Wed, 13 Dec 2000, Scott McClure, CCNP, CCDA, MCNE wrote:
>
> > Andy and Edward are both correct. It is much easier if you were trying
to
> > block address that fall on specifi
face Ethernet0
access-group 1 <--- apply access-list 1 (outbound by default)
Hope this helps...
Scott McClure, CCNP, CCDA, MCNE
--
When I disagree with a rational man, I let reality be our final arbiter; If
I am right, he will learn, If I am wrong, I will; one of us will win,
Shaun,
Can you provide us an example of the 4908 configs? The problem may be in
the IRB configuration, or in SAP spoofing (sometimes the router will respond
to GNS faster than the local servers).
Scott
"Shaun Wakelen" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED
Michael is correct. About the only thing you can do is set the STP
priorities on the ports differently for different VLANs, so that VLAN 10
traffic prefers Bplink A and VLAN 20 prefers uplink B. This would be a sort
of manual load balancing.
<[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED
Patrick,
If what you are looking for is a switch that provides in-line power (i.e.
for IP phones, wireless bridges, etc.) check out the Catalyst 3524XL-PWR.
They provide -48VDC to end devices over a standard ethernet connection and
Cat5 cable.
Best Regards,
Scott McClure, CCNP, CCDA, MCNE
I used the Lammle book and it seemed to cover what was on the exam pretty
well.
"Hussam Adili" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi everyone,
>
> I would like to get your opinion about Tode Lammle Support 2.0 book.
> Is it OK for the support Exam
20 matches
Mail list logo