Did you try disabling the built-in winxp firewall?
Kind Regards,
Tim Booth
MCDBA, CCNP, CCDP, CCIE written
-
Those who would give up essential liberty to purchase a little temporary
safety deserve neither liberty nor safety.
Benjamin Franklin, 1759
Have you tried the Modem Host command on the line with the 2501?
Kind Regards,
Tim Booth
MCDBA, CCNP, CCDP, CCIE written
-
Those who would give up essential liberty to purchase a little temporary
safety deserve neither liberty nor safety.
Benjamin Franklin
Does anyone know of a possible configuration where the ip address that
is assigned to a Cat5k sc0 interface can be shared with a vlan interface
on the Cat5k RSM?
Kind Regards,
Tim Booth
MCDBA, CCNP, CCDP, CCIE written
-
Those who would give up essential
Very true. Hmm.. Realistically speaking, telnetting into the switch
isn't necessary, but I see your point; doesn't sound too feasible. It's
too bad it's not all just one platform.
Kind Regards,
Tim Booth
MCDBA, CCNP, CCDP, CCIE written
-
Those who would
network point-to-multipoint nonbroadcast and specifying
neighbors under the router ospf configuration, but that didn't work.
Seems to me N_B is only compatible with N_B...?
Kind Regards,
Tim Booth
MCDBA, CCNP, CCDP, CCIE written
-
Those who would give up
. If it is to be suggested that I can't use CCIE in a
phrase simply because it *by itself* represents something different than
what I'm implying, that would be a little silly.
I'm not trying to get a job with this title, or pretend to be
something I'm not; just indicating where I'm at.
Kind Regards,
Tim Booth
usually
open up a few weeks ahead of time. It doesn't seem like that specific
idea would be applicable in this case. I'm still open to ideas though.
Kind Regards,
Tim Booth
MCDBA, CCNP, CCDP, CCIE written
---
Those who would give up essential liberty to purchase
.
As far as availability of jobs and such, I don't know this
information.
Kind Regards,
Tim Booth
MCDBA, CCNP, CCDP, CCIE written
-
Those who would give up essential liberty to purchase a little temporary
safety deserve neither liberty nor safety.
Benjamin Franklin
.
Kind Regards,
Tim Booth
MCDBA, CCNP, CCDP, CCIE written
-
Those who would give up essential liberty to purchase a little temporary
safety deserve neither liberty nor safety.
Benjamin Franklin, 1759
Message Posted at:
http://www.groupstudy.com/form
Regards,
Tim Booth
MCDBA, CCNP, CCDP, CCIE written
-
Those who would give up essential liberty to purchase a little temporary
safety deserve neither liberty nor safety.
Benjamin Franklin, 1759
Message Posted at:
http://www.groupstudy.com/form/read.php?f
translation is seamless
*and* you still should be able to use that nat address for telnetting
into the router. I'm not sure why it was working before, if it isn't
supposed to work like this.
Any ideas? Am I forgetting something that is obvious?
Confused,
Tim Booth
MCDBA, CCNP, CCDP, CCIE written
To filter telnet packets to the router it is necessary to apply access
lists to the vty lines with the access-class command.
Kind Regards,
Tim Booth
MCDBA, CCNP, CCDP, CCIE written
-
Those who would give up essential liberty to purchase a little temporary
)?
Kind Regards,
Tim Booth
MCDBA, CCNP, CCDP, CCIE written
-
Those who would give up essential liberty to purchase a little temporary
safety deserve neither liberty nor safety.
Benjamin Franklin, 1759
-Original Message-
From: [EMAIL PROTECTED] [mailto
need to be statically
mapped? Or is it impossible to telnet into the interface that is doing
the NAT translation?
Thanks all for clearing up the extendable issue.
Thanks,
Tim Booth
MCDBA, CCNP, CCDP, CCIE written
-
Those who would give up essential liberty
.xxx.xxx.xxx) tcp 2 (23)
Any ideas?
Kind Regards,
Tim Booth
MCDBA, CCNP, CCDP, CCIE written
-
Those who would give up essential liberty to purchase a little temporary
safety deserve neither liberty nor safety.
Benjamin Franklin, 1759
Message Posted
. It fixed the problem. However, I'm curious as to WHY
I needed to do this and what does the extendable command function to do?
Thanks,
Tim Booth
MCDBA, CCNP, CCDP, CCIE written
-
Those who would give up essential liberty to purchase a little temporary
safety deserve
Is there any way to get NAT (not PAT) to use as an outside interface,
an Async interface that has IP ADDRESS NEGOTIATE and PPP IPCP
ACCEPT-ADDRESS on it, or is it only possible to have NAT use an outside
interface with a static IP address?
Thanks,
Tim Booth
Message Posted at:
http
All goes well until the first CCIE candidate asks about money and was told
its 60K (UK Sterling) no frills no overtime, maybe a car, but you only
work
at one site. This to work in London, where CCIE used to command 100K+
What's the equivalent in USD?
Kind Regards,
Tim Booth
MCDBA, CCNP, CCDP
Hello all,
I'm happy to report I passed my IE written just today. Whew!! Now on to
the
lab..
Kind Regards,
Tim Booth
MCDBA, CCNP, CCDP
-
Those who would give up essential liberty to purchase a little temporary
safety deserve neither liberty nor safety
Is the ROM in say, a 2501, actually EEPROM? Cisco doesn't differenciate
between the two really. In the case that it is EEPROM, is it possible to
re-write/erase it from within the IOS? I couldn't find any pertinant info on
the Cisco site about this..
Kind Regards,
Tim Booth
MCDBA, CCNP, CCDP
that
cert means a whole lot, certainly nothing compared to any Cisco cert. You
could know a ton about hardware and old OS's and not pass because you're a
bad test taker. That cert challenges your abililty to take tests, not know
the material.
Kind Regards,
Tim Booth
- Original Message -
From
CCDP is the
CID(640.509)
You need to be a CCDA before you can become a DP...
Kind Regards,
Tim Booth
MCDBA, CCNP, CCDP
-
Those who would give up essential liberty to purchase a little temporary
safety deserve neither liberty nor safety.
Benjamin Franklin, 1759
What are the differences, if any, between the QuizWare and Boson IE written
practice test(s)? Is the QuizWare better than the Boson?
Tim Booth
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=26361t=26361
--
FAQ, list archives
My most recent post (an anwer to ITGuy's acl query) didn't appear. this is
a test.
I've had problems with missing posts as well
Tim Booth
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=23684t=23675
--
FAQ, list archives
they
don't test your ability to do anything constructive, and certainly don't
compare to Cisco exams much less the IE lab for how much they actually test
useful knowledge.
Kind Regards,
Tim Booth
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=23743t=23860
Hello,
Just passed the CCDA. 90% That's an annoying exam IMHO. I really don't
think
it's that great of an exam. A lot of trivial stuff on it.
On to the DP..
Tim Booth
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=22247t=22247
Hello,
Anyone want to get rid of their scheduled spot for the IE lab? Anyone know
where people would post this information?
Thanks,
Tim Booth
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=22065t=22065
--
FAQ, list archives
Hello All,
Today is a good day. Just passed Support with 85%. I didn't find this test
easy by any stretch of the imagination.
I am now a CCNP. Thanks to all for any direct or indirect help in passing
these tests. Now on to the D's...then the I's.
Have a good one,
Tim Booth
Message
Alex,
Ip dhcp-server should be sufficient for your needs. Nothing else should need
to be enabled. Try it out.
Tim Booth
- Original Message -
From: khramov
To:
Sent: Wednesday, September 26, 2001 8:24 AM
Subject: Re: DHCP [7:21051]
Hello,
ip dhcp-server works, I didn't
Michael,
You need to configure your PRI interface and I believe create one to many
channel-groups on that interface as needed; One for every pair of lines that
will run to your remote sites, so say 13 channel-groups.
Hope this helps,
Tim Booth
- Original Message -
From: michael
Michael,
Per-PRI interface...(controller T1 or maybe E1 command) then set up the
framing and linecode, then set up channel-groups with the channel-group
command.
Tim Booth
- Original Message -
From: Michael Dungl
To: Tim Booth ;
Sent: Wednesday, September 26, 2001 9:44 AM
Subject
Priscilla and others:
Ip dhcp-server does not turn your router into a dhcp server. It tells your
router where your dhcp server is.
Tim Booth
- Original Message -
From: Priscilla Oppenheimer
To:
Sent: Wednesday, September 26, 2001 12:12 PM
Subject: Re: DHCP [7:21051]
Why do you
(Lammle series) is sufficient to
pass the CCIE *written* exam.
Thanks,
Tim Booth
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=21060t=21060
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
as 255.255.255.255, and would
be forwarded out all interfaces (?).
Hope this helps,
Tim Booth
- Original Message -
From: khramov
To:
Sent: Tuesday, September 25, 2001 2:57 PM
Subject: DHCP [7:21051]
Hello
How do I enable broadcast for DHCP server? I know that ip
helper enables UDP
34 matches
Mail list logo