2/1/2002 6:00pm Friday
I am running 16 meg flash & 64 meg RAM in my 2600's & have that same ROM
Richard
//
""Circusnuts"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I have ROM Version 11.3(2)XA3 installed in my 2611, I was told that I
> may need the latest ROMs for the
2/8/2002 6:20pm Friday
I think you should go take the CCIE lab.
It's a lot easier now --- only one day instead of two. You'll fly right
thru it !
Richard
//
""mike johnson"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi All,
> I took the Cisco PIX CSPFA exam yesterday
12/1/2001 2:45pm Saturday
Where do you live ?
Richard
//
""Bruce Evry"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello,
>
> I am a Cisco Instructor and have been toying with the idea of
> running very low-cost classes that would be affordable for those not
> sponsore
12/5/2001 5:20pm Wednesday
IT IS A THING OF BEAUTY
Easy E, Did you see this ?
Richard
//
""Sasa Milic"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> StarWars episode IV in text mode:
>
> telnet to towel.blinkenlights.nl
Message Posted at:
http://www.groupstudy.
12/6/2001 10:48amThursday
Professionals, I am setting up a 2621 w/dual ethernet. Is it possible to
mirror all traffic going thru e 0/0 to e 0/1 so I can run an IDS box on e
0/1 ?
The PIX & LAN will be behind e 0/0
Thanks,
Richard
//
Message Posted at:
http://www.groupstudy.com/
12/9/2001 4:48pm Sunday
Professionals,
How are IP ARP requests handled in LANE ?
Richard
//
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28607&t=28607
--
FAQ, list archives, and subscription info: http://www.groupstu
12/9/2001 4:50pm Sunday
Professionals,
Is the LAS a transit point for all traffic between LEC's ?
Thanks,
Richard
//
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28608&t=28608
--
FAQ, list archives, and subscription in
12/12/2001 10:42pm Wednesday
Professionals,
I am researching the default behavior of the Cisco router during boot up. I
am very familiar with the "hands on" side of upgrading flash & RAM on 2500 &
2600's but I need a "text book" answer.
I searched Cisco's site for "boot process" & "boot seq
12/12/2001 10:45pm Wednesday
Professionals,
Is the LES a transit point for all traffic between LEC's ?
Thanks,
Richard
//
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=29030&t=29030
--
FAQ, list archives, and subscripti
eck the configuration-register boot field
> value for advice as to where to get the IOS from. What's more, before the
> IOS is loaded the router will scan the configuration file in NVRAM (if one
> is there) for any boot system commands.
>
> I'll search CCO to see if I can f
#x27;s
> been a while since I've even thought about LANE.
>
> Regards,
> John
>
> On Wed, 12 Dec 2001, nettable_walker
> ([EMAIL PROTECTED]) wrote:
>
> > 12/12/2001 10:45pm Wednesday
> >
> > Professionals,
> >
> > Is th
12/13/2001 12:34pm Thursday
""Howard C. Berkowitz"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> [If the subject line is ambiguous, please consult your Monty Python.]
>
> DISCLAIMER: I am involved in several commercial efforts for paper
> scenarios and virtual racks. I
ctly* between the two LANE clients. The
> >LES gets involved when a LEC wants to join an ELAN and when address
> >resolution is required. Beyond that it doesn't do much.
> >
> >Regards,
> >John
> >
> > >>> "nettable_walker" 12/13/01 7:14:12 AM
> > >&
12/13/2001 1:01pm Thursday
one token ring to rule them all
one fddi ring to find them
one virtual ring to bring them all & in the broadcast storm bind them
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=29119&t=29119
--
FA
;t forget about Michael Flatley, Lord of the Dance
>
>
>
> ""nettable_walker"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > 12/13/2001 1:01pm Thursday
> >
> >
> > one token ring to rule them all
> > one f
12/22/2001 8:30pm Saturday
Professionals, Is it possible to mirror all traffic going thru e 0/0 to e
0/1 on a router ?
Richard
//
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=29958&t=29958
--
FAQ, list archives, and sub
12/24/2001 5:30pm Monday
Has any one set up back to back ATM with these modules ?
I am looking to do it so I can improve my ATM skills.
Richard
//
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=30062&t=30062
--
FAQ, list a
1/28/2002 8:30pm Monday
Vince, I have never gotten a 56k modem to work with a cisco router. I get
the same thing with the blinking curser.
If you plug a 33k modem in you get thru right away.
Please let me know if & how you get a 56k modem to connect.
Richard
//
""Vincent Miller"" wr
1/28/2002 8:55pm Monday
The theory has been around for a while that men did not really go to the
moon.
The sad thing is the taxpayers sure got stuck with a huge bill for nothing !
(even if men did go to the moon the bill was still for nothing).
What became of all the overpriced equipment that
3/27/2003 9:00pm Thursday
This has come up before -
Is there any such thing as an IPX firewall ?
Richard
//
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66358&t=66338
--
FAQ, list archives, and subscription info: ht
4/6/2002 12:34pm Saturday
If you do not have two telephone lines a dial tone simulator is a wonderful
thing.
It has helped me a lot in my CCIE lab prep.
Richard
//
""Nomadic Ping"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
>
> Does anyone know if its possible to c
4/8/2002 9:45pm Monday
I have two Catalyst 3920's connected to two 3640 router w/ NM 1FE1R2W.
I do not see what the big deal is about this switch !!!
Can you please explain the TrCRF and TrBRF thing ?
Thanks a great deal,
Richard
//
""Brian"" wrote in message
[EMAIL PROTECTED]">news:[EMA
4/21/20024:00pmSunday
Any idea how long the old test will be out there ?
I took it a month ago & failed by 4 questions. I was planning on retaking
it in late May.
Thanks,
Richard
//
""Dennis Laganiere"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I took the beta
4/26/2002 8:40pm Friday
I have a Cisco term server here @ home & the syntax is > 192.168.1.101 2200
(space --- no : )
""Steve Watson"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Need some help. I got it up and running but can't seem to connect to a
> port through reverse
4/26/2002 8:40pm Friday
I bought that sim from Bernard a while back It's great if you do not have
the real thing.
I bought my own 3920 a few months ago for my home lab & I can tell you they
are a pain to work with !!!
Rumor was that a 128 meg version (high speed token ring) was in the works
b
4/27/2002 3:20am Saturday
I finished the CCNP over a year ago & did not need reverse telnet.
If you have the $$$ it will not hurt to have it.
Richard
//
""Kris Keen"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Get a 2511, they are fantastic. As far as I know, just abou
""DAve Diaz"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> most written tests are written by folks who love writing questions that
> folks will get confused over or how really obscure, the written tests
> shlould be interactibve and test your cisco knowledge rather than your
ma
5/21/200210:45am Tuesday
Professionals, I have a Cisco terminal server controlling 15 Cisco
routers/switches/PIXs
I would like to add support for 4 Nortel routers.
The Nortel council cable is DB9 female to BD 9 female strait thru.
My plan is to plug plastic terminal adapters [ DB 9 to RJ 45
5/21/20029:00pm Tuesday
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=44682&t=44682
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to
5/30/2002 6:35pm Thursday
Professionals,
I have seen some "deals" on ebay for PIX 515's with FO license. I also do a
lot of work on 2 sets of 525's
Is the FO license upgradeable to a regular license ? Is the FO something in
the chip set & has anyone tried to modify it ?
Thanks,
Richard
/
10/2/2001 4:10pm Tuesday
""Stephen Skinner"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> symon...
>
> sorryi am asleep
>
>
> i don`t like the amount of interface resets you are getting...
>
>
> can you clear counters and watch the amount you are gettingon bot
10/5/2001 9:13pm Friday
Professionals,
I am trying to get the Cisco documentation CD ROM to run on my WIN98 SE
desktop with internet exploder 5.5.
about:blank is all I get when launching the CD ROM.
Can anyone help me with this?
I cannot bring myself to install Netscape, which comes with the
10/18/2001 12:45pm Thursday
Professionals,
If a Cisco router has a blank flash, are there any options to load an image
BESIDES Xmodem/Ymodem & TFTP ?
Thanks,
Richard
//
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=23400&t=23400
--
10/19/2001 3:33pm Friday
Professionals, I have a brand new "in the box" Cisco NM-4T serial module.
Unfortunately, I was never able to get a 3600 router to put it in.
I would like a NM-4A/S to put in my 2600 router.
Would anyone be interested in a trade? Especially anyone in the Chicagoland
a
10/19/2001 6:00pm Friday
Anyone here had any experience troubleshooting BBSM ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=23585&t=23585
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.h
11/2/2001 4:30pm Friday
Professional's, I would like to get traffic from Paris to use ISDN when the
primary link goes done.
When the serial link goes down the ISDN never comes up. I even added a
static route to send ALL traffic from the ethernet to the BRI and the BRI is
not coming up! I di
11/14/2001 7:33pm Wednesday
After six attempts I would think you would have most of the questions
written down.
Use that as a study guide.
There are people who take tests for a living.
They just memorize as much as they can & write a book on what's on the test.
When I am about to teach a CCNA
11/13/20023:03pm Wednesday
Professionals, I have recovered many a password on Cisco routers but this
time I really need to keep the config if at all possible. Cisco says you
can do it. Has anyone pulled it off ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57380&t
I took the routing exam for the CCIP (I already have the CCNP) recently. I
would recommend you know how to set up OSPF, RIP, IS-IS, & BGP before taking
ANY new Cisco exam. It's not like before.
FYI --- you do not have to know how to configure the new Microsoft protocol,
ISNT-ISNT
""boschloo"
11/16/2002 2:00am Saturday
Without directly answering your question, we have NM 1HSSI & NM 1ATMT3 cards
in production & in our lab along with the respective crossover cables.
In preparing for the CCIE R/S lab I was glad we had the actual hardware BUT
after I saw how easy they are to configure
12/11/20026:42pm Wednesday
Professionals, I never (thankfully) had to work with FDDI --- however ---
I was able to land two 4500's & two Nortel ASN's real cheap for my home lab.
All 4 routers have dual ethernet, quad serial, & MMF FDDI modules.
I also have a MMF FDDI NIC card for my NT ser
ot;>news:[EMAIL PROTECTED]...
> nettable_walker wrote:
> >
> > 12/11/20026:42pm Wednesday
> >
> > Professionals, I never (thankfully) had to work with FDDI ---
> > however ---
> > I was able to land two 4500's & two Nortel ASN's real cheap f
Professionals, I am in need of a Catalyst 5505 chassis.
Does anyone have one for sale ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=60354&t=60354
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/ci
Catalyst 5505 that is
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=60462&t=60462
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL P
1/27/2003 5:55pm Monday
Has anyone been to the CCIE R/S lab recently who might want to offer some
general suggestions on what to study (besides the obvious BGP & ISIS) ?
Thanks,
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=62000&t=62000
--
7/18/2002 4:44pm Thursday
Professionals, I am planning on taking the 640-901 in a few days to get
started on the CCIP.
I have not been to a class or bought any books.
Has anyone taken this test already ? The cisco blueprint does not look too
bad - OSPF EIGRP BGP ISIS
mostly real world stuff
7/25/2002 11:33am Thursday
I have one I would like to trade for some other hardware.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49675&t=49675
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/c
8/3/2002 5:45pmSaturday
Anyone have one they might want to trade or sell ?
Richard
//
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=50610&t=50610
--
FAQ, list archives, and subscription info: http://www.groupstudy.co
8/11/2002 2:05pm Sunday
Professional's, Like a lot of other people preparing for the CCIE lab I
have several 2502's & a Catalyst 3920
Now that token ring is OFF the CCIE R/S lab has anyone devised a way to
replace that interface with a 10baseT interface ?
Even if it were $100 per router, th
8/12/20029:02pm Monday
Anyone know a CHEAP source for flash & RAM for above ?
I want to upgrade my home lab
RLP_NIU_5505 (enable)
RLP_NIU_5505 (enable) sho version
WS-C5505 Software, Version McpSW: 6.3(8) NmpSW: 6.3(8)
Copyright (c) 1995-2002 by Cisco Systems
NMP S/W compiled on Jul 30 2002
8/28/20027:25pm Wednesday
I have had excellent experience with the simline. You use regular RJ-45
patch cable to connect it to the router
You might want to check out the following:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2049666072
""H."" wrote in message
[EMAIL PROTECTED]"
9/4/20024:20pm Wednesday
Professional's What is IP to ATM CoS ? How does it fit into the VC
arrangement ?
Thanks,
Richard
//
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52693&t=52693
--
FAQ, list archives, and su
9/5/2002 10:30pm Thursday
You caan do that with Nortel router & a special free program called BNFS95
www.nortelnetworks.com/rml
It works great. I have never tryed it with Cisco. Let me know what
happens.
Richard
//
""Mohamed Saro"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTE
9/9/2002 2:22amMonday
Has anyone ever done this ? I was able to break in to it @ bootup & it
looks amazingly like a cisco router but I cannot figure out how to do it.
Marconi's web site is actually more usless than Nortel's !!!
Thanks,
Richard
//
Message Posted at:
http://www.grou
9/9/2002 2:22amMonday
Has anyone ever done this ? I was able to break in to it @ bootup & it
looks amazingly like a cisco router but I cannot figure out how to do it.
Marconi's web site is actually more usless than Nortel's !!!
Thanks,
Richard
//
Message Posted at:
http://www.grou
9/19/2002 9:40pm Thursday
You could just tell your LAN admins not to change anything on the switches.
""Newell Ryan D SrA 18 CS/SCBT"" wrote in
message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Evening group,
>
> What I have a TACACS server and the setup we are trying to achieve goes a
9/25/20026:06pm Wednesday
Paul, If it is a 2500 router you are looking to upgrade you can get the
bootprom's from Cisco for free.
When I was going for CCNP two years ago I bought 8 used 2501, 2502, 2503,
2504, 2522
& cisco sent me the chips for all of them for free.
Richard
//
""Casey,
9/26/2002 11:11pm Thursday
Professionals - I have two WIN95 laptops --- one is connected to a Catalyst
3920, then token ring 0/0, the other to a Catalyst 1924, then ethernet 0/0
Barbados#sho cdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
to that after I figure out the first
issue !
Richard
//
""Priscilla Oppenheimer"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> nettable_walker wrote:
> >
> > 9/26/2002 11:11pm Thursday
> >
> > Professionals - I have t
take a look @ www.routerchief.com
""Vicuna, Mark"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> It depends on the flash chips, some older boot roms do not recognise the
> newer chips.
>
> Call cisco to get some upgraded roms if you have a contract or you can
> get them cheap
GOT IT WORKING !!!
Barbados#sho rif
Codes: * interface, - static, + remote
Dst HW AddrSrc HW AddrHow Idle(min) Vlan Routing Information Field
00a0.24f9.fab2 N/ATo0/0 0 - -
0005.7725.e420 N/ATo0/0 2 - -
0005.7725.e402 N/ATo0/0
Anybody have any ideas ? router tryes to boot, but goes in to rommon
rommon 8 > meminfo
Main memory size: 32 MB. Packet memory size: 16 MB
Available main memory starts at 0xa000e000, size 0x1ff2000
Packet memory starts at 0xa800
NVRAM size: 0x2
rommon 9 > dir
usage: dir
rommon 10 > dir
Thank you
I already swapped memory once, but I will try it again.
""Kim Graham"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Check your flash for crash info files. You can read through these and or
> download them to add to your TAC case. You have a memory error and may
nee
10/3/20029:45pm Thursday
When I loook @ the link you referenced I can honestly see why I love Cisco &
truly regret working on Bay/Nortel routers & switches for 2 1/2 years before
ever touching Cisco & letting my ego headed boss bully me into getting the
Nortel Networks Certified Support Exp
Hi,
> I had a very similar message, I changed the cache and main RAM, but I
> just got different error messages. I concluded that I had a bad
> backplane. However, I swapped around the NP modules, and it's been
> working fine since
> rgds
> Marc
>
> nettable_walke
10/5/2002 9:50pm Saturday
RLP_5505 (enable) sho module
Mod Slot Ports Module-Type Model Sub Status
--- - - --- ---
1 12 1000BaseX Supervisor IIIG WS-X5550no ok
2 22 MM OC-3
10/5/2002 9:50pm Saturday
I would like to connect the ATM blade on my Catalyst 5505 to a Marconi/FORE
ASX-200WG
Can anyone guide me thru setting it up ?
RLP_5505 (enable) sho module
Mod Slot Ports Module-Type Model Sub Status
--- -
CORE_A#
CORE_A#sho ver
Cisco Internetwork Operating System Software
IOS (tm) 4500 Software (C4500-JK9S-M), Version 12.2(12), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 20-Aug-02 23:40 by pwade
Image text-base: 0x60008948, data-base: 0x610B2000
ROM: System B
Over the mountain, take me across the sky
Something in my monitor, something bridged inside
Where did I wander? where d'ya think I telnet'ed to?
I've seen Cisco's magic astral plane. I'll use the CLI to get through
I heard them tell me that this land of BGP peers was now
I told them I had ridden h
This is a 10BASET hub ?
""Duncan Wallace"" wrote in message
news:[EMAIL PROTECTED]
> Quick question for the group. I have a 2621, 1 of the FA ports connected
to
> a hub. from there, I have 2 servers running win2K's network load
balancing.
> Pretty simple config to cluster 2 web servers with a VI
If you have not takes the CCIE R/S written you might want to study up on
IS-IS
(and of course IS_NT-IS_NT )
""PPC-DAT Ep-Ng-Ist"" wrote in message
news:[EMAIL PROTECTED]
> Is IS-IS tested on the ccie lab exam?
> Rgds,
> Akpome.
> **Please support GroupStudy by purchasing from the GroupStudy Sto
I see what you are describing about one router every six months. I am
assuming the power supply is on.
I would recommend you open an TAC case & RMA the router. The two biggest
problems Cisco has with the 4000 router chassis are
1] memory stops working because of the "seats" where the memory fit in
72 matches
Mail list logo